Browse by Format Type

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Number of items: 1018.

Knipe, Russell Alexander (2014) 3D fluid modelling of the O.O. Madsen Bridge during flood. [USQ Project]

Knox, Donna (2004) 3D terrain visualisation and virtual fly-through for tourism conservation using Geographic Information Systems (GIS). [USQ Project]

Heng, Fook Hai (2008) 3D Terrestrial laser scanning for application in earthwork and topographical surveys. [USQ Project]

Bavarin, Rudolph Edouard (2006) 50 kW eddy current brake. [USQ Project]

Smith, B. (2010) A biomechanical analysis for improved ergonomics in metal detector products using trajectory optimisation. [USQ Project]

Price, Daniel (2007) A comparative review of attributes of engineers in senior management roles. [USQ Project]

Marion, Michael (2011) A comparison of AUSGeoid09 and AUSGeoid98 in the Hawkesbury Valley. [USQ Project]

Strahley, Matthew (2011) A comparison of depth sounder positioning techniques for hydrographic/bathymetric surveys. [USQ Project]

Rolph, David Gordon (2006) A comparison of DGPS correction sources in South Eastern Queensland. [USQ Project]

Dorahy, Will Paul (2008) A comparison of remotely sensed terrestrial spatial information. [USQ Project]

Hooson, Mitchell D (2015) A comparison of the limitations and accuracy of both obstructed prism and obstructed non-prism measurements. [USQ Project]

Cole, Andrew James Shorten (2009) A comprehensive study of footing on c-φ soil slopes - numerical and physical modelling. [USQ Project]

Bowles, Yvonne Elizabeth (2013) A consistent approach to headlight screens in NSW. [USQ Project]

Dakers, Nicole (2009) A cost benefit analysis of rural residential water supply – constant flow vs. full pressure. [USQ Project]

Thompson, Dean (2005) A four quadrant adjustable speed drive for series wound DC motors. [USQ Project]

Trent, Stephen Wade (2005) A habitat suitability index model for the trapdoor spider species, 'Arbanitis variabilis'. [USQ Project]

Motswagae, Tshepo (2011) A laboratory experiment based on the ‘Segway’. [USQ Project]

Bernardel, George (2004) A MATLAB-based framework for engineering design evaluation via virtual prototyping. [USQ Project]

Tanoi, Levei (2005) A model to establish a global navigation satellite system (GNSS) testing and validation center at the University of Southern Queensland. [USQ Project]

Malpress, Ray (2007) A new internal combustion engine configuration - opposed piston with crank offset. [USQ Project]

Keightley, Anthony J (2016) A numerical investigation into sinkhole formation. [USQ Project]

Fichera, Anthony (2011) A practical comparison of VISSIM and SIDRA for the assessment of development impacts. [USQ Project]

Randall, Neil William (2011) A preliminary analysis of the effectiveness of the new QLD GDL program. [USQ Project]

Freeman, Bryan (2013) A preliminary feasibility study for transporting Surat Basin export coal using Maglev technology. [USQ Project]

Rizzo Naudi, Antonello (2005) A quality assurance system at the Land Survey and Mapping Unit (Malta). [USQ Project]

Reinbott, Nigel (2009) A review and update of the supply chain documentation within Amcor Flexibles. [USQ Project]

Mayo, Benjamin Marc (2008) A Review of a cadastral boundary adjustment software program. [USQ Project]

Mulliss, Michael Stephen (2009) A review of the application of adverse possession within the Torrens system of land regulation in Australia. [USQ Project]

Nash, Lachlan (2015) A review of warrants for traffic barriers in divided carriageway medians. [USQ Project]

Strack, Anita Leigh (2015) A review on Australian mine haul road design procedures. [USQ Project]

Lee, Chang Long (2005) A study and evaluation on Seri Wawasan bridge in Putrajaya, Malaysia. [USQ Project]

Kannapiran, Ram Kumar M. (2005) A study and evaluation on SMART Project, Malaysia. [USQ Project]

Robinson, Adam (2015) A study into the behaviour of FRP bolted connections. [USQ Project]

Leow, Jia Hui (2005) A study of building foundations in Malaysia. [USQ Project]

O'May, David Victor (2007) A study of pavement performance on the Gatton Bypass Duplication. [USQ Project]

Grant, Robert Kenneth (2005) A study of the ground and vegetation effects on the propagation of road traffic noise in south east Queensland. [USQ Project]

Lau, Chau Chin (2004) A study on concrete faced rockfill dams. [USQ Project]

Hogan, Matthew Julian (2014) A test facility for assessing the performance of IEC61850 substation automation designs. [USQ Project]

Jordan, Benjamin W. D. (2009) A touch-screen controlled 'Linear Predictive Synthesizer' for accessibility applications. [USQ Project]

Arnold, Matthew David (2008) A two-dimensional analysis of the bearing capacity of footings near slopes. [USQ Project]

Long, Derek (2013) A.R Drone vision-guided searching. [USQ Project]

Nelson-White, Greg (2006) Abandoned shafts study (Charters Towers): a spatial solution. [USQ Project]

Sinderberry, Mark (2007) Accuracy assessment of 3D laser scanning data utilising different registration methods. [USQ Project]

Reynolds, Jeremy (2006) Accuracy assessment of VRS in a dynamic environment. [USQ Project]

Stephens, James Finlay (2004) Accuracy evaluation of 3-D laser imaging scans. [USQ Project]

Bell, Mitchell (2013) Accuracy of a machine guided grader. [USQ Project]

Hughes, Neil (2006) Accuracy of volumes from MX(moss) design software. [USQ Project]

Lister, Gregory (2006) Active vibration control. [USQ Project]

Peckett, Damian (2013) Adaptive Markov decision control of high-frequency drip irrigation systems. [USQ Project]

Mehoub, Gabrel (2013) Adhesive wear and frictional behaviour of glass fibre reinforced thermoset composites. [USQ Project]

McCarthy, Cheryl (2004) Advance rate measurement for furrow irrigation. [USQ Project]

Peters, Renee (2011) Advanced analysis of shallow foundations located near slopes. [USQ Project]

Coppen, John (2004) Advanced wastewater treatment systems. [USQ Project]

Cox, Jeremy Neil (2010) Advantages and practicality of using a 2D hydrodynamic model in comparison to a 1D hydrodynamic model in a flood prone area. [USQ Project]

Padda, Ranjit Singh (2008) Air flow through two layered mesh at varying porosity and spacing. [USQ Project]

Sana, Newman (2013) Air particle monitoring using image processing. [USQ Project]

Milne, G. (2009) Airframe development and flight testing for entry into the 2009 Outback Challenge. [USQ Project]

Knight, Tracey Anne (2014) Alkali-silica reaction in concrete bridge piles: strengthening with fibre-reinforced polymers. [USQ Project]

Knight, Tracey Anne (2014) Alkali-silica reaction in concrete bridge piles: treatment and strengthening with fibre-reinforced polymers. [USQ Project]

Crone, Jeffrey John (2009) Alternate pavement types on reactive soils in the Ipswich Council area. [USQ Project]

Marland, Michael (2014) Alternatives to SF6 in HV circuit breaker insulation. [USQ Project]

Charles, Andrew (2006) Ambient air temperature aeration controller. [USQ Project]

Boully, Jacinda (2014) An analysis of human behaviour which can cause fatalities in the bus and train tunnel during a tunnel fire event. [USQ Project]

Carlin, Steven (2015) An analysis of kinetic energy recovery systems and their potential for contemporary internal combustion engine powered vehicles. [USQ Project]

O'Callaghan, Adam (2014) An analysis of roadbase materials used in foamed bitumen stabilisation. [USQ Project]

Fitzgerald, Samuel Jesse (2015) An assessment of rural road network resilience as a critical infrastructure for coal seam gas development in regional Queensland. [USQ Project]

Clarke, Timothy Lewis (2004) An autonomous bird deterrent system. [USQ Project]

Baxter, Melissa Hope (2014) An energy and carbon audit of Mornington Peninsula Shire Council. [USQ Project]

Paul, Gregory (2015) An evaluation of traffic calming devices for major highways passing through rural Australian communities. [USQ Project]

Rowlings, David Selwyn (2010) An experimental and theoretical investigation of side weirs. [USQ Project]

Quarisa, Matthew (2005) An inexpensive hardware-based identification system for improved computer security. [USQ Project]

Goold, Bradley (2014) An innovative intelligent system for child care & safety applications using ZigBee Wireless Sensing Networks. [USQ Project]

Fagg, Ashton (2012) An intelligent vision system for wildlife monitoring. [USQ Project]

Lynch, Jason Michael (2005) An internet based SCADA system. [USQ Project]

Skipworth, Julian (2010) An investigation and quantitative analysis of the impacts on stream flow and fluvial erosion associated with urbanisation of a small catchment. [USQ Project]

Hancock, Robert John (2015) An investigation into LandXML for implementation of 3D Cadastre in eSurvey. [USQ Project]

Weyman-Jones, Ashley (2010) An investigation into the accuracy and limitations of automatic target recognition in total stations. [USQ Project]

Stanley, Matthew (2010) An investigation into the Australian height datum on Ballina Island. [USQ Project]

Maunder, David (2007) An investigation into the establishment of a continuously operating GPS reference station at Dubbo City Council, Central West NSW. [USQ Project]

Madden-Holmes, Ben (2010) An investigation into the legislative changes affecting tidal boundaries in Queensland. [USQ Project]

Heit, Andrew (2011) An investigation into the parameters that affect the swell factor used in volume and design calculations at Callide open cut coal mine. [USQ Project]

Temple-Watts, Philip (2011) An investigation into the suitability Of volunteered information to create a flood extent map. [USQ Project]

Accendere, Robert Peter (2015) An Investigation into the testing and commissioning requirements of IEC 61850 Station Bus Substations. [USQ Project]

Brice, Joshua (2009) An investigation into the Victorian permanent survey mark infrastructure. [USQ Project]

Assiriyage, Buddhi Nuwan Lanka (2010) An investigation of aluminium/eproxy particulate composite system - impact/long-term behavior. [USQ Project]

Wady, Vaughan (2009) An investigation of land and property information (NSW) proposed E-Plan process of digital survey plan lodgement in LandXML format. [USQ Project]

Shaw, Mark Andrew (2010) An investigation of roles and development pattern of regional airports, Queensland Australia. [USQ Project]

Klibbe, Christopher Aaron (2010) An investigation on the high water mark as a land boundary. [USQ Project]

Purvis, Alan (2015) An investigative study of road construction contract variations. [USQ Project]

Goodwin, Brent (2009) Analyse original marks and occupation used to reinstate boundaries for identification surveys. [USQ Project]

Porter, Simon (2015) Analysing geotechnical aspects of concrete pipe culverts. [USQ Project]

Campbell, Nicholas (2005) Analysing the effect of speed variation on irrigation efficiency in travelling irrigators. [USQ Project]

Wong Wan Sie, Winxie (2007) Analysis and design of curtain wall systems for high rise buildings. [USQ Project]

Thompson, Caleb (2015) Analysis and design of Telehandler Lifting Jib. [USQ Project]

Chan, Man Piu (2005) Analysis and modeling of grouting and its application in civil engineering. [USQ Project]

Alenazi, Saud Khlaif K. (2010) Analysis and taxonomy of network quality of service (QoS) concepts in the long term evolution/system architecture evolution (LTE/SAE) System. [USQ Project]

Fraser, Mark John (2008) Analysis of a no-till toolbar for a two wheeled tractor. [USQ Project]

Janke, Scott (2005) Analysis of a sheet metal bucket elevator head. [USQ Project]

Pathiranage, Thilini (2015) Analysis of bridge failure due to Cyclone Marcia in Central Queensland using fault tree method. [USQ Project]

Jordan, Bradley (2015) Analysis of bridges subjected to flood loadings based on different design standards. [USQ Project]

Hooper, James Andrew (2006) Analysis of catchment G in Oakey's sewer network. [USQ Project]

Clarke, Jason (2010) Analysis of data to develop models for spray combustion. [USQ Project]

Cheah, Siew Lee (2004) Analysis of engine performance using palm oil methyl ester. [USQ Project]

Keleher, Matthew (2011) Analysis of high-speed rural traffic crashes within the South-West district of Toowoomba regional council. [USQ Project]

de Leeuw, Gert Johannes Schreuder (2007) Analysis of hydraulic transients in pipeline networks. [USQ Project]

Worrall, Nofoaluma (2006) Analysis of providing affordable electricity supply for the outer islands in the Maldives. [USQ Project]

Basson, Johan (2013) Analysis of the aerodynamic attributes of motor vehicles. [USQ Project]

Walker, Scott (2015) Analysis of the behaviour of composite transom decks for railway bridges. [USQ Project]

Palmer, Matthew Alan (2010) Analysis of the feasibility of a 3D model for use in civil construction (creating a 3D model for the first span of a bridge). [USQ Project]

He, Mingqian Belinda (2006) Analysis of the recycling method for aluminum soda cans. [USQ Project]

Harber, Paul James (2005) Applicability of no-fines concrete as a road pavement. [USQ Project]

Davis, Kieren Peter (2009) Application of an urban runoff model using surface specific parameters. [USQ Project]

Carter, Andrew William (2006) Application of geographical information system in underground coal mine to assist operational management. [USQ Project]

Wilson, Maree (2005) Applications of geospatial information technology for fire risk assessment and management in NSW. [USQ Project]

Dudman, Benjamin (2014) Aquaplaning assessment and mitigation in flat terrains. [USQ Project]

Sheridan, Liam (2014) Aquaplaning: an investigation of surface flow calculation. [USQ Project]

Dugdale, Paul Nicholas (2014) Arc flash protection of a low voltage motor control centre. [USQ Project]

Dugdale, Paul Nicholas (2014) Arc flash protection of a low voltage motor control centre (MCC). [USQ Project]

Jacobs, Peter Gregory (2005) Assessing RTK GPS for a suburban survey practice. [USQ Project]

Liddell, Benjamin Steven (2014) Assessing the true cost of design variations – a designer’s perspective. [USQ Project]

Taylor, Brett C. (2004) Assessment of appropriate pressure vessel flange bolt tension by finite element modelling. [USQ Project]

Darr, Shawn Geoffrey (2004) Assessment of crop health in relation to competition from weeds: using balloon-borne images and pectrometer data. [USQ Project]

Babin, Robyn E. (2005) Assessment of factors influencing water reuse opportunities in Western Australia. [USQ Project]

Stanley, Thomas (2013) Assessment of the FARO 3D focus laser scanner for forest inventory. [USQ Project]

Tozer, Paul (2005) Assessment of the feasibility of a terrestrial scanner in underground and surface mining at BHPB Cannington mine. [USQ Project]

Coe, Daniel (2010) Asset management for Tamworth Regional Council’s sewer network. [USQ Project]

Butler, Michael (2015) Asset management framework for NSW local government. [USQ Project]

Luckemeyer, Nils (2005) Assisted standing and walking mode for Robug IV eight legged robot. [USQ Project]

Stanton, Dale John (2010) Atterberg limits and their relationship to longitudinal cracking in granular pavements. [USQ Project]

Sussanna, Vittorio (2013) AUSGeoid09 performance in mountainous regions. [USQ Project]

Walker, Cameron (2010) Automated soil compaction machine for the preparation of Califorian bearing ratio and proctor specimens. [USQ Project]

Hugo, Michael (2006) Automatic roller shell groover. [USQ Project]

Richardson, Mark (2015) Automatic splint to prevent self-harm in autistic and brain injured people. [USQ Project]

Partridge, Toni Leigh (2006) Automation of a load-haul-dump (LHD) unit. [USQ Project]

Holzheimer, Carson Keith (2007) Automation of the rollingstock twist test. [USQ Project]

Littleton, Craig Andrew (2005) Autonomous unmanned aerial surveillance vehicle - autonomous control and flight dynamics. [USQ Project]

Kaliyev, Vladislav (2015) Axial Flux Permanent Magnet coreless machine. [USQ Project]

Kerr, Mitchell (2013) Axisymmetric scramjet inlet operation with varying cowl positions. [USQ Project]

Mokonopi, Kealeboga (2006) Balancing a two wheeled robot. [USQ Project]

Ho, Khoon Chy Randal (2005) Balancing wheeled robot. [USQ Project]

Surtees, Mark Stephen James (2009) Bathymetric survey of flooded open cast mine workings. [USQ Project]

Nicol, Lachlan Keith (2014) Behaviour of fibre composite walkways and grating. [USQ Project]

Klinge, Craig Desmond (2012) Behaviour of gang-nail plated timber joints in tension perpendicular to the grain. [USQ Project]

Plain, Matthew (2009) Behaviour of innovative fibre composite sandwich panels for structural applications. [USQ Project]

Pickford, Christopher Ian (2009) Behaviour of laminated fibre composite sandwich girders. [USQ Project]

O'Keeffe, Andrew (2011) Behaviour of polymer concrete for infilling fibre composite tubes. [USQ Project]

Mak, Chi Keung (2005) Benefit of partnering in the Hong Kong construction industry. [USQ Project]

Davey, Robert James (2006) Best percentage by weight of micro-spheres as fillers in phenolic resins, with fracture toughness as a benchmark. [USQ Project]

Gurney, Richard Noel (2006) Best percentage weight of microspheres as fillers in resin using three-point bending test. [USQ Project]

Jesshope, Ashlee Elizabeth (2008) Bike tour plan for Toowoomba region. [USQ Project]

Di Bella, Robert Michael (2010) Biogas generation from an anaerobic pond 'abattoir'. [USQ Project]

Hockey, Josh (2011) Biometric analysis for remote examination system. [USQ Project]

Boskovic, Selina (2008) Bioretention basin best practice design guidelines. [USQ Project]

Harvey, Warren John (2007) Bridge approach guardrail prioritisation. [USQ Project]

Savage, Andrew (2013) Brisbane City Council strategic planning: delivery of sustainable transport. [USQ Project]

Leong, Ik Sung (2011) Broadband satellite internet service testing. [USQ Project]

Miller, P. (2008) Building a two wheeled balancing robot. [USQ Project]

Patterson, Melanie (2015) Building Information Modelling: an explorative study. [USQ Project]

Gravatt, Manu Richard (2005) Burdekin Falls Dam: investigation of the structural integrity of the outlet works radial gate and fixed wheel gate under emergency closure situations. [USQ Project]

Penman, Brian (2011) Calculation and comparison of the noise and latency of RTK observations using radio link and NTRIP. [USQ Project]

Mowat, David (2010) Callide C Power Station's generator protection system 'ride through capabilities' for various external faults. [USQ Project]

Gardner, Craig (2008) Carbon nanotubes (CNT) as potentially a more effective material for photovoltaic (PV) converters. [USQ Project]

Handley, Robert (2012) Carbon offsetting through soil carbon sequestration for the coal mining industry: an application of a soil carbon modelling. [USQ Project]

Brailsford, Steven (2013) Cathodic protection of reinforced concrete bridges in the marine environment as an asset management tool. [USQ Project]

Thompson, Robert William (2008) Centreline tools upgrade. [USQ Project]

Truasheim, Barak (2011) CFD modelling of a pump intake. [USQ Project]

O'Neil, Anthony M. (2005) Chassis design for SAE racer. [USQ Project]

Armstead, Jared Kenneth (2006) Chassis development for the formula SAE racer. [USQ Project]

Tomkins, Brock William (2011) Chemical resistance of geopolymer concrete against H2SO4 & NaOH. [USQ Project]

Robertson, Matthew (2015) Circular geopolymer concrete columns with composite rebars. [USQ Project]

Gallagher, Tony (2007) Clear zones in urban environments. [USQ Project]

Gwynne, Aeolyn (2005) Cloud detection system for the Mt Kent observatory. [USQ Project]

Lee, Ven Han (2004) Co-firing of rice husk for electricity generation in Malaysia. [USQ Project]

Anumula, Sreekanth (2014) Communications for smart grid substation monitoring using WIMAX protocol. [USQ Project]

Donald, Michael Craig (2010) Comparative properties of epoxy/sawdust composites with palm oil cured by microwave and thermal treatment. [USQ Project]

H'ng, Po Lyn (2007) Comparative study of engineering leadership of senior engineers in Malaysia & Australia within the construction industry. [USQ Project]

Cormick, Adam (2015) Comparing different heating methods for determination of moisture content in soils. [USQ Project]

Horan, Darryl (2013) Comparison of a traditional and a distributed storage water supply network for an isolated system. [USQ Project]

Johnson, Peter (2013) Comparison of direct rainfall and lumped-conceptual rainfall runoff routing methods in tropical North Queensland – a case study of Low Drain, Mount Low, Townsville. [USQ Project]

Treverrow, Daniel (2006) Comparison of injury criteria for human head impacts. [USQ Project]

Jacobs, Sunny (2006) Comparison of life cycle energy consumption of alternative irrigation systems. [USQ Project]

Garrard, Brian John (2005) Comparison of moisture density relationship tests in civil engineering materials. [USQ Project]

Kirby, Christopher (2015) Comparison of PV maximum power point. [USQ Project]

Jones, Jeffrey Francis (2009) Comparison of robotic total stations for scanning of volumes or structures. [USQ Project]

Mayen, David Ayuen (2009) Composites from natural renewable resources in civil engineering: Epoxidized vegetable oil with epoxy resin, fly ash and sawdust fillers(mechanical, physical and structural properties). [USQ Project]

Lyle, Nathan Ross (2009) Comprehensive design charts for the footing on slope problem. [USQ Project]

Wong, Wei Loon (2005) Compressed natural gas as an alternative fuel in diesel engines. [USQ Project]

Napper, Bryce (2006) Computational fluid dynamics (CFD) investigation of the thermal efficiency of micro climate conditioning of a typical workstation. [USQ Project]

Chan, Teck Wai Alan (2005) Computational fluid dynamics (CFD): investigation for improving pigs' housing design. [USQ Project]

Outschoorn, Jeremy Paul (2005) Computational fluid mechanics investigation of ventilation aboard a livestock vessel. [USQ Project]

Gould, Nicholas (2009) Conceptual design of a sustainable energy-waste solution for the residential sector. [USQ Project]

Little, Richard A (2015) Condition monitoring of rotating machinery - vibration analysis. [USQ Project]

Alsinan, Abdulaziz (2015) Conductivity of wall materials based on natural fiber. [USQ Project]

Wai-Ming, Yeung (2008) Confirmation program of safety inspection of lift components (CPSI). [USQ Project]

Rogers, S. (2013) Conjugate heat transfer analysis evaluation of a water cooled component for use in an electric arc furnace. [USQ Project]

Lau, Chi Hing (2006) Construction technology for high rise buildings in Hong Kong. [USQ Project]

Moody, Bradley John (2005) Control and instrumentation for the USQ Formula SAE-A race car. [USQ Project]

Crawford-Ross, Michael Richard (2008) Control of accumulator in a continuous processing line. [USQ Project]

Kong, Mun Kai (2005) Control of early thermal cracking of raft foundation by using slagcrete portland blast-furnace cement (PBFC). [USQ Project]

Quinton, Matthew (2015) Controller Area Network to Modbus network bridge to interface gas detection units with Building Management Systems. [USQ Project]

Ali, Noorahmad Bin (2005) Corrosion in the boiler tubes of the Tuas South Incineration Plant, Singapore. [USQ Project]

McInally, Stuart Anthony (2013) Cost effective galvanising in remote areas. [USQ Project]

Single, John H. (2014) Cost effective pavement reconstruction or rehabilitation profile(s) in Townsville. [USQ Project]

Weis, Paul Raymond (2007) Cost effectiveness of street lighting. [USQ Project]

Fowler, Jason (2006) Cost effectiveness of suburban street lighting. [USQ Project]

Luke, Ricky (2006) Cost effectiveness of suburban street lighting. [USQ Project]

Walker, Bryan Patrick (2007) Cost-effective 3D modelling. [USQ Project]

Linnan, Nicholas (2015) Creating a performance management system for contractors to assess subcontractors. [USQ Project]

Murdoch, Robert (2015) Creating a simplified model of the Alkali-Silica Reaction in concrete by utilising finite element modelling techniques. [USQ Project]

Spurry, Nicholas (2015) Critical analysis of RCM in an Australian ANSP context. [USQ Project]

Falken, Jason (2005) Critical review of techniques for rigid spoolpiece metrology observation and reduction. [USQ Project]

Harrington, Daniel (2011) CSG water as a medium to grow marine microalgae for biofuel production. [USQ Project]

Millikan, Toby (2006) Current and future capacity of the Wirraglen Scout Reserve Wetlands to improve urban stormwater quality at Highfields. [USQ Project]

Miletic, Alista (2005) Current controller for inverter bridge designed for grid-connected photovoltaic system. [USQ Project]

Atkinson, Jack Allan (2014) Dam deformation surveys with modern technology. [USQ Project]

Seccull, Christopher (2011) Darwin residential end use pilot study. [USQ Project]

Woolf, Rodney J. (2005) Data mining using Matlab. [USQ Project]

Drew, Aaron Matthew (2009) DEA control interface, power system analysis, synchronisation and load management controls - design, construction and commissioning. [USQ Project]

Fahey, Lawrence John (2010) Decision support system for assessing the benefits of incorporating swabbing facilities into water pipelines. [USQ Project]

Lawless, Daniel Patrick (2006) Defining non-tidal riparian boundaries. [USQ Project]

Wilson, Hugh B. (2005) Defining the human security understanding and expectations of the Queensland Branch of the United Firefighters' Union in the context of Australia's burgeoning Asian free-trade ambitions. [USQ Project]

Kilpatrick, Glen R (2015) DEM generation and hydrologic modelling using LiDAR data. [USQ Project]

Jiang, Jennifer (2015) Demand Management Storage Project (DMSP) – an application of grid scale battery energy storage systems. [USQ Project]

Campbell, Andrew Charles (2009) Deriving a high resolution DEM from ALOS PRISM data. [USQ Project]

Long, Geoffrey Michael (2008) Deriving land use and land cover maps from 2.5m SPOT 5 imagery. [USQ Project]

Steger, Jason P. (2008) Deriving transformation parameters for existing survey co-ordinate systems in the Australian Capital Territory. [USQ Project]

Vaipulu, Seini 'Ela Uatekini (2009) Design a prototype solar dryer for drying sea cucumber. [USQ Project]

Grassick, Bruce (2006) Design and construction of a solar collector for teaching purposes. [USQ Project]

Fitzhenry, Ryan (2009) Design and develop virtual reality games utilising the 'anti‐gravity' arm support for stroke rehabilitation therapy. [USQ Project]

Lim, Doou Gie (2005) Design and development of a conveyor system for semiconductor industry. [USQ Project]

Ikin, James (2013) Design and development of a fibre optic microphone. [USQ Project]

Kennedy, Isaac (2014) Design and development of a fibre-optic microphone. [USQ Project]

Schultz, Justin (2005) Design and development of a prototype, small plot research harvesting system. [USQ Project]

Howarth, Rowan (2009) Design and documentation of Bairnsdale regional landfill - Cell 3 Johnston’s Road, Bairnsdale. [USQ Project]

Pijpers, Louis Kennedy (2008) Design and implementation of a microprocessor-controlled BMX start gate. [USQ Project]

Beasley, K.-J. (2004) Design and implementation of a network address translator. [USQ Project]

Springall, Glenn (2008) Design and implementation of a remotely accesible inrush current testing package for power (distribution)transformers. [USQ Project]

Walsh, Dan (2011) Design and retrofit a compressed gas powered engine to a motor scooter. [USQ Project]

Kleynhans, Claudius Justus (2007) Design and review of Millmerran coal handling plant. [USQ Project]

Weston, Bill Thomas (2007) Design and trial of an alternative option for suburban sewerage pump stations. [USQ Project]

Lewers, Glyn Alan (2010) Design of a frame/structure for a large wastewater treatment pond. [USQ Project]

Brown, Steven (2011) Design of a high-shear geopolymer concrete mixer. [USQ Project]

Yok Meng, Tan (2007) Design of a microclimate ventilation system. [USQ Project]

Parkin, Damion Ian Harcourt (2007) Design of a rear suspension configuration for a live axle race car to achieve optimum handling characteristics. [USQ Project]

Strong, Simon James (2008) Design of a small wind turbine. [USQ Project]

Perry, Ramon (2010) Design of a small wind turbine for a rural community in Australia. [USQ Project]

Kirsch, Joshua (2009) Design of a small wind turbine for electric power generation(1-5kW). [USQ Project]

Hicks, Kevin Charles (2007) Design of aeration ploughing tool for poultry litter within shed to reduce odour generation. [USQ Project]

Stewart, Robert (2007) Design of electro-hydraulic controlled poppet valves. [USQ Project]

Cox, Scott (2013) Design of remote laboratory experiments for integration into MEC2402 – stress analysis. [USQ Project]

Gounder, Sangeevam (2005) Design of steel structures under fire. [USQ Project]

Heng, Hern (2004) Design of structural glass fitting for seismic condition. [USQ Project]

Inderbitzin, Martin David (2006) Design review and analysis of Collinsville power station coal handling plant. [USQ Project]

Kuan, Siew Yeng (2009) Design, construction and operation of the floating roof tank. [USQ Project]

Daly, James (2010) Design, construction and performance of buildings foundations on soft clays in the Brisbane region. [USQ Project]

Smith, Scott David (2012) Determination of a strategic planning approach for maintenance management of a major road network. [USQ Project]

Gordon, Craig (2005) Determination of insitu flexible moduli of modified pavement materials. [USQ Project]

Clerke, Adam (2004) Determination of mean high water mark within New South Wales. [USQ Project]

Howard, Damian John (2008) Determination of property boundaries in NSW where monument movement has occurred. [USQ Project]

Assiriyage, Buddhi Nuwan Lanka (2009) Develop a computer-based system to assess and exercise the arm movement of stroke patients. [USQ Project]

Law, Boon Lee (2005) Develop a system to monitor, analyse and report health data captured during exercise. [USQ Project]

Napier, Luke W. P. (2014) Develop process bus architecture for integrating sampled value IEDs. [USQ Project]

Alexis, Jeremie (2011) Developing a home-based functional application for an EEG-based brain computer interface. [USQ Project]

Stimela, David Master (2005) Developing a methodology using multi spectral remote sensing data for mapping vegetation change - a key variable in soil erosion mapping. [USQ Project]

Alanne, Glen (2008) Developing a model to predict water main failures. [USQ Project]

Whittred, Daniel (2006) Developing a monitoring and control system for irrigation pumping units. [USQ Project]

Brits, Chane (2014) Developing a numerical model for the design of sheet pile walls. [USQ Project]

Burtenshaw, Ryan (2015) Developing an activity-based user interface for remote experimentation for science education in schools. [USQ Project]

Jiankulprasert, Manop (2006) Developing physical model for bearing capacity and flow net applications. [USQ Project]

Woods, Andrew (2006) Development and characterisation of an anechoic chamber. [USQ Project]

Nielson, Fiona Jane (2012) Development and evaluation of a field mobility data capture system for condition assessment of assets. [USQ Project]

Olsen, Campbell (2015) Development and execution of asset criticality framework: a study of water and wastewater infrastructure at Toowoomba Regional Council. [USQ Project]

Brooks, Simon (2010) Development and testing of a networked PC power management tool. [USQ Project]

Taylor, Scott (2008) Development and testing of a portable GNSS network solution using the magellan propark3. [USQ Project]

Walter, Nathan Johan (2010) Development of a bridge asset management plan for Southern Downs Regional Council. [USQ Project]

Roberts-Apps, Adam (2013) Development of a coal wagon monitoring and control system. [USQ Project]

O'Shannassy, Geoffrey Mark (2009) Development of a driver training simulator for use by stroke patients. [USQ Project]

Harber, Matthew (2005) Development of a drivetrain system for a formula SAE-A race car. [USQ Project]

Backman, Shane A. (2009) Development of a high voltage DLA test apparatus. [USQ Project]

Gibbons, Anthony (2010) Development of a laser pointer mouse. [USQ Project]

Hayllor, Nicholas (2006) Development of a low cost GPS guidance system for use in agriculture. [USQ Project]

Domrow, Ryan (2005) Development of a mechanical testing system to investigate road deformation. [USQ Project]

Otto, Colin W. (2006) Development of a mobile vehicle classification system. [USQ Project]

Curtis, Benjamin Phillip (2006) Development of a noisy vehicle detection system. [USQ Project]

McKie, Scott (2007) Development of a portable high-wall lighting system. [USQ Project]

Szabo, Phillip (2013) Development of a pump efficiency monitor for use in cotton irrigation. [USQ Project]

Coppock, James (2015) Development of a Raspberry Pi based, SDI-12 sensor environmental data logger. [USQ Project]

Birkbeck, A. (2007) Development of a remote laboratory system for external university students. [USQ Project]

McKenzie, Seren (2014) Development of a road safety plan for Scenic Rim Regional Council. [USQ Project]

Thiess, Jeremy (2007) Development of a test frame to investigate the propagation of pressure waves generated by a thunderbolt hammer. [USQ Project]

Sekhesa, Calvin Cally (2006) Development of a tool for estimating net emissions of greenhouse gases at farm and sub-catchment level. [USQ Project]

Thomas, Benjamin Brett (2010) Development of a tournament management system. [USQ Project]

Nobbs, Rebecca (2012) Development of advanced SWER models for the Ergon Energy network. [USQ Project]

Pichlis, Matt V. (2014) Development of advanced turbulent combustion models. [USQ Project]

Griinke, Tyler John (2013) Development of an artificial neural network (ANN) for predicting tribological properties of kenaf fibre reinforced epoxy composites (KFRE). [USQ Project]

Douglas, Nadine Sarah (2009) Development of an asset maintenance program for Darwin City Council. [USQ Project]

Gunton, Michael J. (2006) Development of an asset management strategy for the city of Mandurah WA. [USQ Project]

Jesshope, Douglas James (2012) Development of an electronically controlled thruster. [USQ Project]

Wilson, Bede (2010) Development of an unmanned aerial vehicle for use during disaster situations. [USQ Project]

Hesse, Gareth Grant (2014) Development of ductile and ultra-high performance engineered cementitious composite (ECC) with lightweight microsphere additive. [USQ Project]

Elvy, Michelle Catherine (2004) Development of infiltration factors for the estimation of urban separate wastewater flow in the Gippsland water catchment. [USQ Project]

Camplin, Tony (2009) Development of methods to monitor continuously operating reference station antenna stability. [USQ Project]

Worrall, Andrew (2007) Development of quality assurance procedures for cadastral surveying using GPS technology. [USQ Project]

Little, Jeremy (2004) Development of the drivetrain including brakes and wheels for the Formula SAE-A vehicle. [USQ Project]

Tai, Ping (2010) Dielectric, thermal and mechanical properties of sawdust reinforced epoxy composites post-cured in microwaves. [USQ Project]

Cobb, Benjamin Jon (2006) Directional microphone array for security applications. [USQ Project]

Triaca, Bryan F (2015) Disposable stormwater sampling device for water quality hazard detection. [USQ Project]

Tunnah, Patrick (2015) Diversion of stormwater first flush: an alternative method of managing pollution to urban waterways. [USQ Project]

Martin, Nathanael John (2013) Domestic lawn mower blade noise and influence of machine geometry. [USQ Project]

Jones, Bruce Thomas (2007) Dragline maintenance engineering. [USQ Project]

Govender, Gansen (2006) Driver fatigue issues on State Highway 1 south of Whangarei - within region 1 of New Zealand. [USQ Project]

Martin, Joseph A. (2010) Driving problems encountered in the UAE by newly arrived expatriates and tourists. [USQ Project]

Skillington, Robert George (2013) DSP based lock-in amplifier. [USQ Project]

Prasser, Mark (2005) Durability of hybrid concrete-FRP bridge decks. [USQ Project]

O'Leary, Haydn (2012) Dynamic characterisation of cellular cores and sandwich beams. [USQ Project]

Murphy, Ryan (2015) Dynamic conductor ratings: annealing properties of homogenous conductors across varying climatic conditions. [USQ Project]

Kerr, James (2015) Dynamic response testing method of damage detection in fibre composite structures. [USQ Project]

King, Joshua (2006) Dynamic tracking of a race car. [USQ Project]

Mustafa, Muhammad Zaki Bin (2006) E-tutorials for electrical engineering courses using Dreamweaver. [USQ Project]

Kmita, Shane (2011) Echo cancellation in VoIP using digital adaptive filters. [USQ Project]

Al-Busaidi, Ibrahim A. (2005) Economics of photovoltaic water pumping system in Sultanate of Oman. [USQ Project]

Bishop, Matthew Darrell (2007) Educational robot design. [USQ Project]

Cheong, Fong Chin (2004) Effect of admixtures on the use of short fibres in structural concrete to enhance mechanical properties. [USQ Project]

Ford, Joseph (2015) Effect of environmental surroundings on accuracy and precision of total station measurements. [USQ Project]

Alam, Murshedul (2004) Effect of epoxy repairing on girders shear strengthened with external post tensioning. [USQ Project]

Luther, Steven (2005) Effect of existing cracks in shear strengthening of concrete girders with external post tensioning. [USQ Project]

Whittaker, Todd (2005) Effect of existing cracks in shear strengthening of concrete girders with external post-tensioning. [USQ Project]

Althaus, Kimberley (2009) Effect of irrigation management on nitrate movement under a lettuce crop. [USQ Project]

Bein, Vincent (2015) Effect of time interval variations on RTK derived distances. [USQ Project]

Atkinson, Andrew Peter (2014) Effect of variations in load profile on power transformer cyclic ratings. [USQ Project]

Caunce, Catherine May (2010) Effective road pavement design for expansive soils in Ipswich. [USQ Project]

Sanders, Thomas (2014) Effective road pavement rehabilitation design for local government roads within the Sunshine Coast region. [USQ Project]

Wilson, Paul (2011) Effectiveness of lime stabilisation on reactive soils for main roads. [USQ Project]

Hetherington, Chris (2008) Effectiveness of real time kinematic global navigation satellite system suveying (RTK GNSS). [USQ Project]

Mohr, Logan (2007) Effects and controls of lateral refraction in underground coal mines. [USQ Project]

Timms, Ashlii (2015) Effects of elevated temperature and simulated environmental conditions on the properties of epoxy based polymer resin. [USQ Project]

Reed, Mark Edward (2012) Effects of fibres and curing temperature on geopolymer concrete. [USQ Project]

Cameron, Rick (2012) Effects of on-board HHO and water injection in a diesel generator. [USQ Project]

Kohn, Nicholas (2013) Effects of proposed bioretention system on existing waterbird habitat. [USQ Project]

Patel, Kunal J. (2013) Effects of transformer inrush current. [USQ Project]

McKay, Michael (2007) Electrical training package for mining area C. [USQ Project]

Dobson, David (2013) Electro muscle stimulus system for wasted muscle rehabilitation. [USQ Project]

Grimm, Justin John (2009) Electromagnetic linear actuator - design, manufacture and control. [USQ Project]

Molloy, Reuben (2005) Electronic systems for the USQ formula SAE racer. [USQ Project]

Teo, Kian Peng (2005) Electronics and the environment - Singapore perspective. [USQ Project]

Delahunty, Bruce (2011) Elevated highways – a solution to Brisbane’s traffic congestion? [USQ Project]

Sullivan, T. (2007) Embedded control system for biogas digesters. [USQ Project]

Brown, Simon Neil (2005) Embedded IP for small devices. [USQ Project]

Jones, Adam (2009) Enabling voice calls via a wireless broadband router. [USQ Project]

Lang, Jason (2015) Energy efficiency improvement in coal fired power plant through operational optimisation. [USQ Project]

Santarossa, Matthew (2015) Energy Management & Automated Analytics. [USQ Project]

Plank, Melinda (2005) Engine optimisation and performance characteristics for a formula SAE race car. [USQ Project]

Reynolds, Peter William (2013) Engineering correlations for the characterisation of reactive soil behaviour for use in road design. [USQ Project]

Lovett, Jy (2013) Engineering design of a disposable water bottle for an Australian market. [USQ Project]

Manthey, Nathan William (2009) Environmentally friendly natural fibre composites with Qld. based vegetable oils. [USQ Project]

Bailey, Thomas Sullivan (2010) Environmentally friendly natural waste materials for use in civil structures. [USQ Project]

Cooney, Tyson (2009) Epoxidised resins from natural renewable resources. [USQ Project]

Wise, Timothy Glen (2009) Error resilient H.264 coded video transmission over wireless channels. [USQ Project]

Clemence, Andrew John (2008) Error resilient JPEG2000 transmission over wireless fading channels. [USQ Project]

Wilson, Aaron P (2015) Establishing a mix design procedure for Geopolymer concrete. [USQ Project]

Bartlett, Jeremy Adam (2006) Establishment of a priority infrastructure plan for the major road network in Laidley Shire. [USQ Project]

Schuh, Stephen Andrew (2007) Estimating rippability of Brisbane Tuff using quantitative and qualitative characteristics and a modified approach to an existing rippability rating method. [USQ Project]

Gibson, David Eric (2010) Evaluating comparative performance of various shaped bridge piers: experimental investigation of sediment transport and scouring. [USQ Project]

Ismail, Wafeek (2015) Evaluating the differences and accuracies between GNSS applications using PPP. [USQ Project]

Davey, Wade (2015) Evaluating the effectiveness of Intelligent Transport Systems at reducing speeds through roadwork sites in Australia. [USQ Project]

McKeering, Loretta M. (2004) Evaluating the potential to impose partial root zone drying (PRD) on clay soils in commercial cotton production systems. [USQ Project]

Ang, Soh Fong (2004) Evaluation impact strength on particulate reinforced (25% and 33%) vinyl ester composite cured under microwave conditions. [USQ Project]

Shaw, Neil Geoffrey (2006) Evaluation of Ashtech ProMark2 survey system. [USQ Project]

McGuinness, Sean J. (2006) Evaluation of commercial EMF software. [USQ Project]

Fenwick, Wayne (2005) Evaluation of control for the adjustment of the digital cadastral data base (DCDB). [USQ Project]

Tobler, Jake P (2015) Evaluation of EverFE software for designing Australian concrete pavements. [USQ Project]

Mackenzie, Christopher Frank (2004) Evaluation of funding justification of low volume roads in North Queensland. [USQ Project]

Wright, Christopher John Brockway (2014) Evaluation of issues for small and medium-sized enterprises in the use of advanced and green engineering materials. [USQ Project]

Evans, Jesse Troy (2015) Evaluation of photogrammetric measurements obtained using imaging rovers and imaging theodoli. [USQ Project]

O'Sullivan, Daniel (2014) Evaluation of precise point positioning services. [USQ Project]

Metcalfe, Patrick James (2013) Evaluation of remotely piloted aircraft in surveying applications. [USQ Project]

Sebby, Melcuam (2013) Evaluation of roads safety processes currently used in Queensland. [USQ Project]

Farrugia, Daniel (2015) Evaluation of signalised intersections in NSW with right turn filters. [USQ Project]

Asghar, Muhammad Athar Aqeel (2015) Evaluation of strength characteristics of recycled bituminous pavement materials. [USQ Project]

Taylor, Jarrod Lee (2012) Evaluation of the capacity of signalised two lane roundabouts. [USQ Project]

Zeller, Karl (2011) Evaluation of the operational characteristics of heavy vehicles at signalised intersections in Queensland. [USQ Project]

Hautsalo, Kari (2013) Evaluation of the performance of different global satellite navigation systems (GNSS) for Australian GNSS users. [USQ Project]

Cleaver, Benjamin L. (2013) Evaluation of the performance of web-based GNSS post processing systems. [USQ Project]

Tucker, Neil John (2006) Evaluation of the Queensland streets concept in residential streets in Logan City. [USQ Project]

Neumann, Philip (2013) Evaluation of the strength characteristics of recycled bituminous pavement materials. [USQ Project]

Inglis, Rientz (2006) Evaluation of VRS-RTK GPS latency in a dynamic environment. [USQ Project]

Yap, Lee Jiuan (2005) Evaluation of wet scrubber systems. [USQ Project]

Jenaway, Brett (2013) Evolution of stadiums: a study in the design and construction of ancient and modern stadia. [USQ Project]

Chuah, Yew Pin (2005) Evolutionary structural optimization for multi component structural systems. [USQ Project]

Kennedy, Jotham Ariel (2010) Experimental investigation into the uplift capacity of ground anchors in sand. [USQ Project]

Rosas, Angela Beatriz Rodriques (2014) Experimental investigation on the alkali silica reaction effect on concrete strength degradation. [USQ Project]

Lee, Kuang Sheng (2006) Experimental study of the mechanical properties of particulate reinforced composite. [USQ Project]

Maskall, Jonathon (2015) Exploration of evaporation mitigation measurement techniques. [USQ Project]

Eaton, Timothy (2013) Exploring the application of closed form solutions in geotechnical problems. [USQ Project]

Boitshoko, Daniel (2007) Extracting spatial information from aerial video imagery for monitoring riparian areas. [USQ Project]

Clarke, Lauren Elizabeth (2007) Factors in the selection of contractors for engineering works. [USQ Project]

Sadanala, Swapan (2015) Failure analysis of total hip replacement and the feasibility of fibre composites as an alternative material. [USQ Project]

Hockings, Peter (2004) Fast-response piezoresistive pressure transducers for thermofluids experiments. [USQ Project]

Sambamo, Richard (2014) FEA analysis of tractor axle modification. [USQ Project]

Anderson, Oliver Josh (2015) Feasibility assessment of low cost stereo computer vision in clay target shooting coaching. [USQ Project]

Pearson, Kelly (2015) Feasibility of improved traffic flow on Cohoe Street, Toowoomba by intersection improvements. [USQ Project]

Vincec, Paul Michael (2008) Feasibility study: into the design, effectiveness & limitations of installing raingardens within an inner urban environment. [USQ Project]

Tinning, Eugene (2006) Field deployable shower unit by dual membrane filtration. [USQ Project]

Klein, Lindsay Edward (2006) Finite element analysis of a composite bridge deck. [USQ Project]

Collier, Shane Michael (2015) Finite element analysis of a hybrid natural fibre sandwich wall panel loaded with in-plane shear. [USQ Project]

Mohammed, Rafiqul Islam (2015) Finite element analysis of fillet welded joint. [USQ Project]

Gould, Adam Mark (2010) Finite volume solution of the unsteady free surface flow equations. [USQ Project]

Surendar, Swetha (2014) Flexural behaviour of sandwich panels under elevated temperature. [USQ Project]

Alqahtani, Rafi Ali (2014) Flexural properties of sisal fibre/epoxy Composites. [USQ Project]

Huq, Rezwanul (2009) Flexural strength of three types of glass powder reinforced vinyl ester composites. [USQ Project]

Sawchuk, Mike (2008) Flexural strength SLG-reinforced phenolic composites cured in microwaves. [USQ Project]

Wilton, Joshua (2014) Foam bitumen stabilisation in north west NSW. [USQ Project]

Baker, Christopher Scott (2004) FoES Formula SAE-A space frame chassis design. [USQ Project]

Smith, Richard Boyd (2004) Forensic investigation of pavement failures. [USQ Project]

Eastaugh, Christopher S. (2006) Forest road decommissioning: modelling the effect on hydrological connectivity. [USQ Project]

Armstrong, John (2004) Formula SAE: design overview and project management. [USQ Project]

Kamali, Khalid (2005) Fractal video compression. [USQ Project]

Chan, Wooi Lieh (2006) Fracture analysis of vinyl ester composites cured under microwave conditions. [USQ Project]

Tsang, Shing Hin (2004) Fracture analysis of vinyl ester composites under microwave condition. [USQ Project]

Lee, Kwan Shing (2005) Fracture analysis of vinyl ester composites under microwave condition. [USQ Project]

Altamar, Rashed (2014) Fracture behaviour of fibre/polymer composites based on synthetic and natural fibres. [USQ Project]

Korowa, Geoffrey (2009) Fracture toughness of glass powder reinforced vinyl ester resin. [USQ Project]

Mautoga, Marau (2011) Fracture toughness of glass powder reinforced vinyl ester resin post cured in a conventional oven using flexural test. [USQ Project]

Yavu, Isei Ledua (2008) Fracture toughness of phenolic resins composite by using saw dust as filler of percentage by weight. [USQ Project]

Tierney, Daniel Robert (2006) Freight transport following an extreme rainfall event. [USQ Project]

Woo, Mun Kit (2006) Frequency synthesizer requirements for future cellular radio systems (06-026). [USQ Project]

Mendis, Marina Shanil (2008) Functional observer for glucose regulation. [USQ Project]

Serra, Michael Peter (2013) Geotechnical stability analysis using student versions of FLAC, PLAXIS and SLOPE/W. [USQ Project]

Masters, Jason Scott (2004) GIS based cadastral planning. [USQ Project]

Jin, Tao (2005) GIS for house hunters: a case study in Toowoomba. [USQ Project]

Philips, Cameron Charles MacGregor (2010) Gladstone Power Station demineralised water plant asset strategy development. [USQ Project]

Curran, Liam Patrick (2008) Global navigation satellite systems for geodetic network surveys. [USQ Project]

Liyanawaduge, Nawanandana Chandrasiri (2007) GPS usage and infrastructure needs for machine guidance and control in the construction projects associated with QDMR. [USQ Project]

Guse, Hayden Alexander (2014) Great artesian basin (GAB) water cooling systems for municipal supplies. [USQ Project]

Costantini, Daniel (2015) Green IT - dynamic network topologies. [USQ Project]

Wiltshire, Mark (2005) Greywater reuse in urban areas. [USQ Project]

Burton, Bruce (2009) Griffin Road drainage diversion – feasibility study. [USQ Project]

Commons-Fidge, Ian G. (2010) Grinding mill conceptual design developments. [USQ Project]

Makireddi, Surya (2014) Groundwater recharge prediction for broad scale irrigation modelling: a case study in the M.I.A-main canal irrigated areas. [USQ Project]

Makireddi, Surya (2014) Groundwater recharge prediction for broadscale irrigation modelling: a case study in MIA-Main Canal irrigated areas. [USQ Project]

McCosker, Daniel Patrick (2006) Guidelines for the use of electronic survey field notes and CAD computation files as legal records. [USQ Project]

Roache, Brody (2004) Heat transfer measurements of a re-entry capsule using fast response thermocouples. [USQ Project]

Dang, Aaditi (2012) Herbicides wash off from cane trash by rainfall. [USQ Project]

Coggan, Robert Walter (2010) High impedance earth fault modelling. [USQ Project]

Newman, Matthew (2014) High speed rail in Australia: a case study for a Sydney- Wollongong link. [USQ Project]

Brandis, Cameron (2009) High voltage earthing system testing - an investigation into the effects of test lead coupling on test results. [USQ Project]

Ngo, Nelson, Shing Chai (2004) High-strength structural concrete with recycled aggregates. [USQ Project]

Pena, Mario de la (2005) Historical identification and mapping. [USQ Project]

Lear, Foster Robert (2008) Hoist system for small boat stacker. [USQ Project]

Wilson, Wayne (2011) Housing affordability in Roma: can progress be made within the regulatory and policy framework? [USQ Project]

Pufelski, Nadine (2010) How effective is microalgae treatment of different wastewaters for simultaneous nutrient removal and lipid production for bio-fuel? [USQ Project]

Coaker, Warren (2007) How engineers become CEOs - implications for education and training. [USQ Project]

Pickford, Jeffrey (2008) How to establish map projections to facilitate the use of GPS on ground-based surveys. [USQ Project]

Raleigh, Andrew (2015) How to mitigate the effects of scour on bridge piers through the use of combined countermeasures. [USQ Project]

Paech, Simon (2008) Human electromagnetic radiation exposure. [USQ Project]

Houweling, F. (2013) Human interface device (HID) keyboard application for android. [USQ Project]

Sankowsky, Brendan (2009) Hydraulic conductivity response of soils to synthetic laundry greywater. [USQ Project]

Senokonoko, Kemueli Bainivalu (2014) Hydraulic modelling of the water distribution system of Tavua-Vatukoula, Fiji. [USQ Project]

Sivongxay, Amphone (2005) Hydraulic properties of Toowoomba soils for laundry water reuse. [USQ Project]

Burton-Ree, Nicholas (2013) Hydroelectric generators for third world countries. [USQ Project]

Moorhouse, David (2014) Hyper-spectral imaging for airborne meteorite detection. [USQ Project]

Fowler, Michael John (2014) Hypersonic rocket manoeuvre in the TUSQ facility. [USQ Project]

Barney, Debra Kaye (2004) Identification mapping and evaluation of timber bridges in the Wide Bay District. [USQ Project]

Gray, David Thomas Chalmer (2004) Impact of demand-side management on substations. [USQ Project]

Houghton, Richard (2009) Impact of tailings subsidence on rehabilitated landform erosional stability. [USQ Project]

Janusaitis, Stephen (2006) Impact response of flat and perforated plate. [USQ Project]

Temple, Christopher Jed (2007) Impediments to identifying freehold land rights in N.S.W. [USQ Project]

Lanigan, Christopher John (2013) Implementation of a condition monitoring program for high voltage (HV) assets for the Santos GLNG Project. [USQ Project]

Morris, Mike (2011) Implementation of electronic measurement and recording of strata title field notes. [USQ Project]

Loh, Chew Ping (2004) Implementation of JPEG-2000 standard for the next generation image compression. [USQ Project]

Snelgar, Daniel (2015) Implementing Industry Best Practice Alarm Management. [USQ Project]

Chow, Kai Wen (2007) Implications for engineers aspiring to become top-senior managers. [USQ Project]

Cooper, Mark Dennis (2010) Improve waste recycling potential through the conversion of normal household waste into biogas. [USQ Project]

Wall, Rhyan (2015) Improved cooling system for USQ's small scale icing wind tunnel. [USQ Project]

Hanson, Scott (2010) Improvement and performance of pavement gravels used by Toowoomba Regional Council for unsealed roads. [USQ Project]

Grygorcewicz, Jon-Paul Frederick (2010) Improvement of hydrocarbon dew point determination via gas chromatography. [USQ Project]

Pescod, Rhys (2015) Improvements to the calibration of Electronic Distance Measurement Equipment (EDME). [USQ Project]

Taylor, Benjamin Allan (2009) Improving accuracy of rainwater tank hydrologic yield estimation across Queensland. [USQ Project]

Briskey, Kyle Gary (2013) Improving caravan design by modelling of airflow. [USQ Project]

Sunzu, Tony Bonaventure (2014) Improving electricity network utilisation with distributed energy storage systems. [USQ Project]

Stevenson, Cameron Laurence (2008) Improving information management & project proposal automation at Data#3. [USQ Project]

Crawford, Peter Alexander (2013) Improving surfing conditions in conjunction with coastal erosion protection. [USQ Project]

Davidson, Timothy (2004) Improving the aerodynamic force measurement system for the USQ gun tunnel. [USQ Project]

Looi Zi Qing, Sean (2007) Improving the performance of an industrial cold room. [USQ Project]

Turnbull, Jon (2011) Improving the performance of the Nanango wastewater treatment plant. [USQ Project]

Costa, Michael (2005) In-vehicle display system. [USQ Project]

Baker, Stuart (2010) Induced draft (ID) fan lubrication system design review and proposed modification upgrade at Callide C Power Station. [USQ Project]

Lumsden, Glenn (2015) Industrial wireless network mapping. [USQ Project]

Vadalma, Anthony (2014) Infant transport incubator cold performance. [USQ Project]

Wady, Ivan (2014) Inflow/infiltration strategic management project. [USQ Project]

Jensen, Jason W. (2004) Influence of physical road characteristics on road crashes. [USQ Project]

Case, Jiel (2011) Initial design of a high-performance and cost-effective mountain bike. [USQ Project]

Ellis, N. (2013) Inspection of power transmission lines using UAVs. [USQ Project]

Donohue, Rachael Michelle (2008) Inspiring high precision dam water depth measurement with novel 'bubbler’ designs. [USQ Project]

Deith, Peter (2005) Instrumentation to track the southern elephant seal. [USQ Project]

Vever, Thierry-Jacques Patrick (2015) Insulated container testing & rating system development. [USQ Project]

Ler, Eng Loo (2006) Intelligent building automation system. [USQ Project]

Gibson, Duane Nikalia (2008) Interaction of recycled concrete and geogrid reinforcement material 14m high reinforced earth wall. [USQ Project]

Newman, Anthony (2007) Interactive map associated with tourism. [USQ Project]

Toh, Pei Ling (2004) Interactive web-based signal processing tutor. [USQ Project]

Geddes, Scott A. (2006) Internal model control (IMC) of a fruit drying system. [USQ Project]

Jordan, Timothy J. (2010) Intrusion and anomaly detection in computer networks using signal processing approaches. [USQ Project]

Wu, Chao di (2009) Investigate the best percentage by weight of glass powder, as fillers in phenolic resins by using tensile tests. [USQ Project]

Cecil, Travis (2008) Investigate the best percentage by weight of glass powder, as fillers in phenolic resins using tensile tests. [USQ Project]

Gianoulis, Cosmas (2006) Investigate the use of thermal protection for underground cables in Ergon Engery's electricity network. [USQ Project]

Kemp, Ryan (2011) Investigates the effect of surface shear on pavements near road intersection. [USQ Project]

Warren, Bradley (2012) Investigating mechanisms for effluent pond sealing: the effect of suspended organic particulate on soil hydraulic conductivity. [USQ Project]

Agoritsas, Stavroula (2015) Investigating the accuracy of terrestrial laser scanning within a rail environment. [USQ Project]

Seiler, Emile (2006) Investigating the economic viability and methods of harvesting and storing Leucaena. [USQ Project]

Dinsmore, Robert Colin (2013) Investigating the impact of the Request For Information process in construction. [USQ Project]

Nguyen, Liem (2014) Investigation in failure analysis and materials selection in total hip replacement prosthesis. [USQ Project]

Craig, Aston J. (2011) Investigation into a fleet bearing monitoring system. [USQ Project]

Koschel, Michael (2009) Investigation into reliability of AUSPOS coordinate data (specifically height). [USQ Project]

Fenn, Scott P. (2011) Investigation into relocatable home design and construction. [USQ Project]

Blyth, Mitchell (2014) Investigation into sub five minute time of concentration in urban drainage design. [USQ Project]

Bauer, Amelia (2011) Investigation into the biochemical methane potential of abattoir wastewater. [USQ Project]

Day, Anthony (2009) Investigation into the causes and possible remedies for the registered surveyor shortage in regional Queensland. [USQ Project]

Pike, Samuel (2015) Investigation into the delamination of composite laminates on aircraft rudders due to fluid ingress and icing. [USQ Project]

Graham, Sharon (2015) Investigation into the economic feasibility of grid-tied photovoltaic panel and storage systems. [USQ Project]

Hosking, Alan (2009) Investigation into the effectiveness of reflectorless technologies on structural surveillance monitoring. [USQ Project]

Duffy, Michael Anthony (2012) Investigation into the impacts on 11kV feeder operation as a result of the increasing use of amorphous core transformers. [USQ Project]

McDonald, Matthew (2011) Investigation into the limitation of measuring to 360 Degree prisms using automatic target recognition technology. [USQ Project]

Gillies, Ross Donald (2005) Investigation into the non-invasive monitoring of blood glucose levels in people with diabetes. [USQ Project]

Hardy, Glen (2008) Investigation into the performance of first flush systems for diesel engine based pollution on roof runoff. [USQ Project]

Pinkham, Daniel (2004) Investigation into the placement and connection of permanent survey marks for cadastral surveys. [USQ Project]

Dann, William (2013) Investigation into traffic controller health and safety at road works in Queensland. [USQ Project]

Gustafson, Adrian Mark (2007) Investigation of a new generation degradable implant material. [USQ Project]

Walton, Joshua Graeme (2008) Investigation of a variable ride height suspension for an automobile. [USQ Project]

Walters, Kieren A. (2008) Investigation of construction practices and test procedures for road pavements on expansive subgrades. [USQ Project]

Bruce, Thomas (2011) Investigation of cost and performance characteristic of photovoltaic panels. [USQ Project]

Green, Nathan Andrew (2013) Investigation of cyclist safety within the Brisbane Bicycle Hire Scheme. [USQ Project]

Trevorrow, B. (2013) Investigation of digital audio manipulation methods. [USQ Project]

Mead, Nicola (2008) Investigation of domestic water end use. [USQ Project]

Li, David (2004) Investigation of driver fatigue problems on the Oakey-Cooyar road. [USQ Project]

Camilleri, Heath A. (2014) Investigation of energy storage media to improve network voltage regulation. [USQ Project]

Wicks, Jaymee (2013) Investigation of factors influencing maximum biogas production of abattoir wastewater. [USQ Project]

Malvern, Jerome Liam (2010) Investigation of high impact capacity composite material for civil infrastructure. [USQ Project]

Shears, Steven Edward (2009) Investigation of life cycle management of electromagnetic flow meters. [USQ Project]

Chan, Zee Hong (2009) Investigation of next generation IEEE 802.11n wireless local area networks (WLAN). [USQ Project]

Zanetti, Ashley (2010) Investigation of pavement design for low volume rural roads. [USQ Project]

Clague, Stephen John (2005) Investigation of relationships between skid resistant deficient pavement and aggregate by GIS and statistical analysis. [USQ Project]

Fairley, Melissa (2015) Investigation of seepage in water supply distribution channels in St George, Queensland. [USQ Project]

Langes, Chris (2013) Investigation of shunt vehicle derailments. [USQ Project]

Muller, Zach Anthony (2010) Investigation of solar thermal energy alternatives and their applications to water heating and air cooling in the meat processing industry. [USQ Project]

Peh, Wee Liang (2004) Investigation of TCP performance over wireless internet. [USQ Project]

Ng, Hai Ching (2005) Investigation of tenable carbon monoxide and visibility level for a fired room. [USQ Project]

Watson, Joshua Francis (2008) Investigation of the bearing capacity of shallow footings located near slopes. [USQ Project]

Zong, Xuejin (2008) Investigation of the best percentage by weight of glass powder as fillers, in phenolic resins using flexural tests. [USQ Project]

Nixon, Robert Jeffrey (2008) Investigation of the best percentage, by weight, of glass powder as filler in phenolic resin using three point bending test. [USQ Project]

Stanton, Vernon (2014) Investigation of the effect of positive and negative crossfalls on road safety at roundabouts. [USQ Project]

Davis, Shawn Wayne (2005) Investigation of the flexural strengthening of concrete beams using external prestressing. [USQ Project]

Bichel, Mitchell Neil (2009) Investigation of the quality management system at Lockyer Valley Regional Council. [USQ Project]

McMahon, Craig Andrew (2009) Investigation of the quality of water treated by magnetic fields. [USQ Project]

Saunders, Michael Joseph (2009) Investigation of the relationship between experimental bridge piers and erosion within a flow. [USQ Project]

Epselis, Jonathan (2015) Investigation of the relationship between speed and separation width for head-on crashes in New South Wales. [USQ Project]

Ling, Damian James (2009) Investigation of the Riegl terrestial scanners - uses and limitations. [USQ Project]

Davydov, Alexey (2011) Investigation of the structural failure of plywood noise barriers. [USQ Project]

Dakin, Anthony (2011) Investigation of the suitability of finger jointed structural timber for use in nail plated roof trusses. [USQ Project]

Sharp, Clayton Anthony (2006) Investigation of Toowoomba intersection crashes. [USQ Project]

Le, Minh N. (2005) Investigation on reuse potential of laundry water for household garden irrigation in Toowoomba. [USQ Project]

Huston, Thomas Clifford (2008) Investigation on the adequacy of disinfection in Toowoomba's water supply network. [USQ Project]

Taylor, Alan Owen (2009) Investigation on the fatigue behaviour of pultruded fibre composites. [USQ Project]

Bissett, Michael James (2008) Investigation on utilising real time kinematic (RTK) global navigation satellite systems (GNSS) for electronic distance measurement (EDM) baseline calibration and traceability of measurement. [USQ Project]

Norman, Grant (2014) Investigations into Cambooya’s water supply pressure with respect to local contributing bores. [USQ Project]

Eaton, John (2015) Investigations into the effect of contaminants on permeable concrete effectiveness during its life cycle. [USQ Project]

Porter, Hannah Elizabeth (2009) Involvement of older drivers at crashes at unsignalised and signalised intersections. [USQ Project]

Smith, Travis (2009) Ipswich City Council development assessment: streamlining the process. [USQ Project]

Martin, Christopher (2007) Ipswich City Council water supply infrastructure capacity high water usage and water meter accuracy. [USQ Project]

Muller, Ben (2007) Irrigation performance and water use efficiency of turf production. [USQ Project]

Timings, Philip (2015) Isolated grid solar-battery support for SWER. [USQ Project]

Gray, Benjamin (2006) Issues with wireless 802.11 networks. [USQ Project]

Khan, Tawfiqul Hasan (2006) Iterative decoding for error resilient wireless data transmission. [USQ Project]

Osbourne, Daniel B. (2012) IV infusion pump training emulator. [USQ Project]

Couch, Greg (2015) Key infrastructure review (Newcastle, NSW) vulnerability to a Tsunami. [USQ Project]

Kruger, Rick William (2014) Kinetic energy recovery in motor vehicles using compressed gas. [USQ Project]

Coburn, Adam John (2014) Laser scanning for forest structure analysis. [USQ Project]

Coburn, Adam John (2014) Laser scanning for forest structure analysis. [USQ Project]

Clayton, Scott (2014) Lateral earth pressure problems involved with cantilever retaining structures and stability of those structures. [USQ Project]

Jessup, Cameron (2015) Launceston’s Combined Sewerage System – investigation and strategy development. [USQ Project]

Burke, Maxwell James (2013) LiDAR data for DEM generation and flood plain mapping. [USQ Project]

Topp, Michael James (2014) LiDAR data for DEM generation and flood plain mapping. [USQ Project]

Barnett, Paul Jonathan (2010) Life cycle assessment (LCA) of liquefied natural gas (LNG) and its environmental impact as a low carbon energy source. [USQ Project]

Supurmaniam, Adrian (2004) Life cycle assessment in electronics. [USQ Project]

Ahmad, Abdul Hamid (2007) Life cycle assessment in semiconductor foundry. [USQ Project]

Tan, Kevin Chin Ning (2005) Life cycle assessment of a mobile phone. [USQ Project]

Hikwama, Baipaki Pakson (2005) Life cycle assessment of a personal computer. [USQ Project]

Mohan, Deepu (2006) Life cycle assessment of a SAW filter. [USQ Project]

Ong, Chin How (2007) Life cycle assessment of cement in Malaysia. [USQ Project]

Wei, Lay Kian (2007) Life cycle assessment of CSR autoclaves lightweight concrete production in Malaysia. [USQ Project]

Orphant, Simon (2004) Life cycle assessment of the production of raw milk. [USQ Project]

Supandy, Mohammed (2009) Life cycle assessment of ultra pure water plant in semiconductor industry. [USQ Project]

Underhill, Richard (2004) Life cycle maintenance of low volume roads in the Alice Springs region. [USQ Project]

Teo, Chin Teng (2005) Lifting mechanism of wheelchair. [USQ Project]

Booshand, Peter John (2007) Literature review of advanced research and innovation in the mining industry. [USQ Project]

Dillon, Megan (2013) Little streets in small cities: the role of laneway activation in regional Queensland CBD revitalisation. [USQ Project]

Walker, Craig Louis (2006) Local and post-local buckling of steel tubes in thin-walled circular concrete-filed steel tubular columns. [USQ Project]

Graham, Kim (2011) Local government greenhouse gas abatement reporting. [USQ Project]

Munro, Frazer (2009) Localised geoid modelling using GPS and precise levelling data. [USQ Project]

Windebank, Mark (2014) Locomotive cooling system strategy optimisation. [USQ Project]

Bradford, Thomas J. (2014) Low-cost eye tracker. [USQ Project]

Field, Shaun (2015) Machine vision and sensing with an Android. [USQ Project]

Menetrier, Paul L. (2008) Machine vision based traffic monitoring with real time tracking. [USQ Project]

Stern, Nathan (2014) Machine vision detection of crop diseases. [USQ Project]

Tonkin, Kyle (2013) Make Garfield (6 axis robot arm) Smart through the design and implementation of voice recognition and control. [USQ Project]

Hartwig, Andrew (2013) Management of low traffic volume roads unsealed road classification system. [USQ Project]

Crowe, Daniel Leigh (2007) Management of physical assets at Purga Quarry. [USQ Project]

Magarry, Anthony John (2010) Management of physical assets – advanced asset management planning. [USQ Project]

Olm, David William Charles (2011) Management of road reconstruction and repair following a flooding disaster. [USQ Project]

Roberton, Stirling (2015) Managing field moisture to reduce the soil compaction risk at cotton harvest. [USQ Project]

Leong, Suet-Leong (2006) Managing product development process for time market. [USQ Project]

Fitzgerald, Danial (2011) Managing the repair of transport infrastructure after a natural disaster. [USQ Project]

Keys, Callum Kirby (2014) Mansell power lifter control circuitry redesign. [USQ Project]

Grigg, Andrew (2014) Mapping changes in landscape-scale patterns of vegetation in coal seam gas development areas. [USQ Project]

Huntley, Matthew Mark (2010) Mapping cycling pathways and route selection using GIS and GPS. [USQ Project]

Reynolds, Wade (2006) Mapping greens at City Golf Course. [USQ Project]

Gibson, John Martin (2004) Mapping of an old mine site for heritage purposes. [USQ Project]

Almenhali, Salem (2004) Mapping the distribution of general practitioners and their billing pattern in the Toowoomba District. [USQ Project]

Taylor, Oliver John (2009) Market segmentation for improved efficiency of Ipswich water supply system. [USQ Project]

Flynn, Christopher James (2012) MATLAB based energy market simulator. [USQ Project]

Eddine, Mustapha Jamal (2009) Measurement of fracture toughness, mechanical and electrical loss tangents of calcium carbonate reinforced vinyl ester composites. [USQ Project]

Watson, George Kenneth (2014) Measurement of waste in concrete construction using lean construction methodologies. [USQ Project]

Kelman, Oliver (2008) Measuring and monitoring of grain silos using laser scanning and total stations. [USQ Project]

Lee, Boon Chong (2006) Measuring moisture content of biofilter media using capacitance. [USQ Project]

Tan, Yian Yian (2011) Measuring with Bees II: in home power and water monitoring. [USQ Project]

Mandava, Jagan (2011) Mechanical behaviour of polymeric composition based on available natural fibres in Australia. [USQ Project]

Wooldridge, Damien Christopher (2014) Methods of feeding out white cottonseed to livestock. [USQ Project]

Lee, Richard Anthony (2005) Micrographs of the fracture of vinyl ester composites cured by microwaves. [USQ Project]

El Komy, Ahmed (2007) Millmerran Power Station ROM coal blockage removal system. [USQ Project]

Robe, Matthew (2014) MiniROV. [USQ Project]

Free, Matthew (2006) Mobile manoeuvring robot. [USQ Project]

Airs, Leslie (2005) Mobile robot guidance and navigation. [USQ Project]

Hatch, Daniel Roy (2014) Modal testing of existing supermarket floor systems and predictive finite element modelling for better design. [USQ Project]

Geary, A. (2013) Model and analysis of a broken conductor (source isolated) earth fault on radial 11kV distribution feeders. [USQ Project]

Dawson, Kim Maree (2005) Modelling load balance type static var compensator control system response. [USQ Project]

Harrison, Rodney James (2005) Modelling Tamworth regional council stormwater network. [USQ Project]

Dann, Jeffrey Michael (2009) Modernisation of an existing irrigation area. [USQ Project]

Stark, Kevin (2006) Modular robot communication interface. [USQ Project]

McIntyre, Jamie (2015) Monitoring and removal of natural organic matter (NOM) from Toowoomba water sources. [USQ Project]

Groves, Lachlan (2014) Monitoring of remote stock watering points by still images using UHF. [USQ Project]

Tan, Kok Wei (2004) Motorcycle safety in Malaysia. [USQ Project]

Ward, Tristan (2011) Multicore algorithms for image alignment. [USQ Project]

Khan, Nizam (2005) Multimedia database search techniques. [USQ Project]

Fletcher, Wade Daniel (2013) MUSIC model accuracy in predicting stormwater quality. [USQ Project]

Hancock, Nashua Thomas (2014) Natural disaster risk management in South Asia a dissertation. [USQ Project]

Stansbie, Clayton Harley (2004) Natural gas burner for copper smelter converter. [USQ Project]

Pratt, Daniel (2011) Near infrared photogrammetric technique on structure beam monitoring. [USQ Project]

Cameron, Justin (2006) Next-generation 3D graphics engine design. [USQ Project]

Watson, P. (2014) Non-contact visual soil moisture content estimation. [USQ Project]

Fritsch, Mark Timothy (2006) Non-trible GPS receivers and virtual reference stations (VRS). [USQ Project]

Willigen, Timothy (2012) Nuclear instruments in mineral processing. [USQ Project]

Tuxford, Andrew (2006) Numerical analysis of a closed face impeller. [USQ Project]

Sams, Mathew Steven (2013) Numerical and physical modelling of a 2D tunnel heading at collapse. [USQ Project]

Faulkner, Griffith (2004) Numerical investigation into the aeration of grain silos. [USQ Project]

Lee, Andrew (2004) Numerical investigation of the temperature distribution in an industrial oven. [USQ Project]

Eagle, Michael Allan (2005) Numerical investigation of the thermal efficiency of glass refrigeration doors. [USQ Project]

Thompson, Simon (2012) Numerical modelling of Big Tyres patented non-pneumatic wheel concept. [USQ Project]

Teoh, Eang Aun (2005) Numerical modelling of complex slope using FLAC/SLOPE. [USQ Project]

Mead, Stuart (2009) Numerical modelling of horizontal flow in sand filters. [USQ Project]

Seccombe, Kieran Robert (2014) Numerical modelling of mining subsidence. [USQ Project]

Petersen, S. (2013) Numerical modelling of minor waterway barriers for fish passage in the Mary River catchment. [USQ Project]

Greig, Edward Stephen (2013) Numerical simulation of water waves in reservoirs affecting evaporation. [USQ Project]

Williams, Wesley James (2014) Numerical simulations of water surfaces for improved evaporation prediction. [USQ Project]

Fleming, Desmond James (2015) Object-oriented image analysis of cotton cropping areas in the Macintyre Valley using satellite imagery. [USQ Project]

Mitchell, Andrew (2007) On-line equipment condition monitoring based maintenance. [USQ Project]

Cook, Garth Anthony (2015) On-site detention methods & the cumulative effect. [USQ Project]

Vriesema, Timothy Ross (2004) 'Online learning environment' using ASP.NET. [USQ Project]

Bollaart, Clement (2007) OPC cycle time analyser. [USQ Project]

Wright, Shayne (2004) Open area test site (OATS) development. [USQ Project]

Barrett, Roland (2013) Operating temperature of current carrying copper busbar conductors. [USQ Project]

Dray, Kevin (2014) Optical access engine development. [USQ Project]

Beutel, Amy (2015) Optimal mix design for epoxy resin polymer concrete. [USQ Project]

John, Benjamin Allan (2014) Optimisation of an electric powered air-gliding skateboard. [USQ Project]

Bichel, Daniel (2007) Optimisation of biodiesel stationary engine performance by modelling and simulating the running conditions. [USQ Project]

Ryan, Richard (2011) Optimisation of flow through a horizontal spiral baffled filter. [USQ Project]

Chamberlain, Michael (2007) Optimisation of Gold Coast City’s chlorine dosing system for the southern region distribution network. [USQ Project]

Rafiei, Ramin (2006) Optimisation of low-cost astronomical site testing techniques. [USQ Project]

Mansell, Chloe (2015) Optimisation of multicore processor and GPU for use in embedded systems. [USQ Project]

Kubler, Kristy A C (2015) Optimisation of off-highway truck fuel consumption through mine haul road design. [USQ Project]

Shepherd, Nathan (2014) Optimisation of outside air pre-cooling via underground conductive heat transfer. [USQ Project]

Elphinstone, Aaron Daniel (2010) Optimisation of pigging infrastructure in design. [USQ Project]

Keller, Jason (2013) Optimisation of the spoked bicycle wheel. [USQ Project]

Dyke, Geoffrey Wayne (2005) Optimising condenser air extraction to reduce greenhouse gas emissions at the Loy Yang B power station. [USQ Project]

Blyth, James Ian (2013) Optimising earth dam design in seasonal freeze-thaw climates. [USQ Project]

Robertson, Jamie Andrew (2004) Optimising the operations of the Kanaka Drain floodgate. [USQ Project]

Curran, Samuel James (2015) Optimized scheduling of water distribution network to reduce energy costs. [USQ Project]

Veenstra, Nathaniel (2011) Optimum strut-and-tie model for a cantilever curved wall. [USQ Project]

Meredith, Tyronne (2011) Options for the replacement of aging bridges under local authority control in rural areas of Queensland. [USQ Project]

Diffin, Luke (2015) Own identification of contributing factors for the success of toll roads in Australia under Public Private Partnerships. [USQ Project]

Hancock, Craig Ross (2015) Own mechanism for solving disputes over retaining walls near property boundaries. [USQ Project]

Davies, Neil (2010) Pedestrian characteristics and control for the Toowoomba city centre master plan area. [USQ Project]

Rae, Andrew Stewart (2006) Performance and stability analysis of an AC variable speed drive. [USQ Project]

Mohr, David (2011) Performance characterisation of pressure regulation devices used in broad-acre irrigation. [USQ Project]

Mackenzie, Matthew Robert (2007) PID controller optimisation using genetic algorithms. [USQ Project]

Mohutsiwa, Donald A. (2006) PID tuning controller using internal model control method. [USQ Project]

Fan, Xinchen (2013) Piecewise adaptive controller design based on ECP model 730 magnetic levitation system. [USQ Project]

Lucas, Ryan (2015) Piecewise adaptive controller design for position control of magnetic levitation system. [USQ Project]

Yu, Yu Wah (2009) Pile driving analysis via dynamic loading test. [USQ Project]

Gall, Daniel (2006) Pitch control module microprocessor upgrade modification raytheon beechcraft bonanza A36. [USQ Project]

Wager, Thomas (2015) Planning support systems for complex infrastructure development. [USQ Project]

Saunders, Joseph Ian (2007) Porous weirs for flood mitigation. [USQ Project]

Salomon, David Scott (2008) Position control using a digital servo system. [USQ Project]

Lascalles, Alex (2009) Potential impact of rising sea level on land ownership and government planning. [USQ Project]

Lefhoko, Mmitsi (2007) Power station operations Millmerran power station feed water dissolved oxygen control. [USQ Project]

Moes, Denika (2015) Power-Law flood frequency analysis of selected Queensland stream gauges. [USQ Project]

Ang, Soon Lim (2006) Predicting the crushing stress of composite materials. [USQ Project]

Heinrich, Nathan (2004) Prediction of feedlot effluent pond odour emission after significant inflow. [USQ Project]

Salonen, Marcus (2015) Prediction of timber bridge girder strength and stiffness using stress wave analysis. [USQ Project]

Rohde, Craig (2008) Preliminary water balance models of the Daly river catchment. [USQ Project]

Pratt, Andrew (2014) Prevention of electrical accidents with safe personal protective bonding and earthing. [USQ Project]

Manthey, Byron (2014) Pre–treatment of coal seam gas produced water. [USQ Project]

Anderson, Troy Dennis (2005) Prioritisation of guard rail remediation works. [USQ Project]

Gelding, Peter William (2010) Prioritising locations for investment based on threats to reptiles and ecosystems within the Condamine Catchment. [USQ Project]

Allen, Glen Keith (2006) Problems of stone mastic asphalt use in north Queensland. [USQ Project]

Yew, Yip Soon (2004) Production flow analysis & inventory control for Orford Refrigeration. [USQ Project]

Connell, David John (2015) Production of semi-real time media-GIS contents of natural disasters using MODIS satellite data. [USQ Project]

Lian, Chua Poh (2006) Production operation system - key performance indicator. [USQ Project]

Cunningham, Mitch (2009) Profiling coal on a conveyor belt for the automation of a train loadout facility. [USQ Project]

Willisch, S. (2009) Programming Sun(TM)SPOTs (Small Programmable Object Technology) in Java(TM). [USQ Project]

Labrosse, Alexander (2015) Progress towards sustainable road construction – An investigation into the Roads and Maritime Services of New South Wales and Sustainability Rating Tools. [USQ Project]

Young, Paul Edward (2004) Project management : a guide from start to finish for BHPBilliton Iron Ore Engineering Services Dept. Port Hedland. [USQ Project]

Koenig, Nathan (2015) Project Management Maturity in Local Government. [USQ Project]

Seeney, Luke (2015) Project performance measures for civil construction projects associated with different procurement strategies. [USQ Project]

Orange, Lachlan (2013) Projectile impacts on hardened alloy steel plate. [USQ Project]

Maher, Daniel (2011) Projection of computer design data onto digital photographs. [USQ Project]

McHugh, William (2011) Properties of nickel as a magnetostrictive material for ultrasonic conditions. [USQ Project]

Breddin, Ian Stewart (2007) Property rights and the littoral zone in Queensland. [USQ Project]

Millard, Aaron (2011) Property rights, cadastral boundaries & coastal erosion in New South Wales. [USQ Project]

Evans, Darryl (2011) Prototype development for a procurement and electronic document management system. [USQ Project]

Cleary, Edward Thomas (2008) Pulsed liquid jet for rock breaking. [USQ Project]

Bishop, Damon Thomas (2010) Pump gland improvement project. [USQ Project]

Brandon, Paul (2006) Quality assurance. [USQ Project]

Heit, Jamie (2005) Quality assurance for virtual reference stations. [USQ Project]

Beer, Craig (2006) Quality assurance system in a small surveying firm. [USQ Project]

Lee, Chin Fung (2006) Quality review of unit technical logistic and maintenance processes. [USQ Project]

Darton, Alex (2014) Quantification of the measurement error associated with in situ measurements of water absorption and attenuation using the AC-9 instrument. [USQ Project]

Fuata, James (2014) Quantifying the effects of convective aerodynamic heating over a double swept-wedge configuration at Mach 6. [USQ Project]

Hansen, Leigh (2010) Quantifying the reduction in hydraulic conductivity of disturbed soil columns as a function of the salinity and sodicity of applied water. [USQ Project]

Sparksman, Peter John (2015) Quantifying the time and cost associated with the Request for Information (RFI) OR Technical Query (TQ) process - a designers perspective. [USQ Project]

Crouch, Glen (2005) Rationalisation of wastewater treatment plants in Launceston. [USQ Project]

Blaby, Bradley Peter (2009) Re-establishment of the state border between New South Wales and Victoria. [USQ Project]

Brookshaw, Iain (2011) Real time implementation of obstacle avoidance for an autonomous mobile robot using monocular computer vision. [USQ Project]

Kinast, Matthew (2009) Real-time data transmission and control of a Neocot over the internet. [USQ Project]

Struthers, Craig (2005) Real-time monitoring and control of a pressure control system. [USQ Project]

Cox, Raymond (2015) Real-world comparisons between target-based and targetless point-cloud registration in FARO Scene, Trimble RealWorks and Autodesk Recap. [USQ Project]

McQuade, Samuel R (2015) Recyclable disposable helmet design. [USQ Project]

Browne, Michael Charles (2015) Recycled rubber access cover riser. [USQ Project]

Pilane, Tshepo Skuuman (2006) Recycling consumer electrical and electronic equipment. [USQ Project]

Peauril, Joshua (2011) Recycling glass fibre composites – process and viability. [USQ Project]

Tan, Heng Tsin Stanley (2007) Recycling of used electronics in Singapore. [USQ Project]

Wilson, Ronald J (2015) Redefining the standard compaction test to better describe the usage of cotton picking machines on Australian vertosols. [USQ Project]

Ruhle, Andrew John Alexander (2004) Redesign and analysis of Janke Bros. F500P parallelogram planting unit. [USQ Project]

Farrington, Jock (2011) Redesign of an FSAE race car’s steering and suspension system. [USQ Project]

Zeller, Mark Nicholas (2013) Reduced road lighting standards during times associated with low traffic volumes. [USQ Project]

Pestano, Julius Rino (2013) Reducing road fatalities – vehicular ad hoc network. [USQ Project]

Christensen, Zane Michael (2009) Reduction of local scour around bridge piers: combined system of aerofoil and slot. [USQ Project]

Chan, Lai Kuan (2005) Reduction of nitrogen oxides (NOx) using liquefied petroleum gas (LPG) in spark ignition (SI) engine. [USQ Project]

Goh, Yaw Siong Oliver (2004) Reduction of noise transmission in The Adephi, Singapore. [USQ Project]

Coaker, Leigh Herbert (2009) Reflector-less total station measurements and their accuracy, precision and reliability. [USQ Project]

Saxby, Ian Michael (2015) Regulating rescue package descent through controlled autorotation. [USQ Project]

Frazer, Peter (2010) Relational contracting – investigation of relational contracting behaviours across various project delivery models. [USQ Project]

Lim, Chuan Jye (2005) Relationship contracting in Malaysia. [USQ Project]

Whiteford, Mark (2008) Relationship contracting in the mineral processing industry. [USQ Project]

Oliver, Anthony James (2004) Relevance of identification surveys in N.S.W. conveyancing. [USQ Project]

Mayne, Caleb (2014) Reliability-centered maintenance analysis of a Rio Tinto iron ore locomotive engine. [USQ Project]

Dickmann, Keith (2013) Remote access laboratory design and installation. [USQ Project]

Hetherington, Nathan John (2004) Remote access of automated test equipment. [USQ Project]

Parry, Aaron (2009) Remote aerial data acquisition and capture project (RADAC). [USQ Project]

Marsh, Scott (2015) Remote identification of overhead conductor materials. [USQ Project]

Hohenhaus, Paul (2015) Remote management of safety systems in power utility installations. [USQ Project]

Ong, Willy (2005) Remote monitoring and instrumentation for Mount Kent Observatory. [USQ Project]

Piok, Dhieu Magot (2010) Remotely accessible 35 kVA diesel backup generator. [USQ Project]

Lim, Chun Hao (2005) Replacement of chiller system of a terminal building. [USQ Project]

Scoines, Barry William (2009) Replacement of steam turbine drive with electric drive. [USQ Project]

Chia, Wee Chong (2005) Research and development of multi purpose carbide end mill. [USQ Project]

Sullivan, Steven Michael (2007) Research, design and develop a pipe latching/unlatching device that can be used to help automate the pipe tripping process. [USQ Project]

McLaughlin, David (2014) Resonator probe for photoacoustic measurement. [USQ Project]

MacMillan, Andrew Allan (2007) Respiration monitor and recording system. [USQ Project]

Alawad, Aziz (2013) Response surface methodology. [USQ Project]

Maseko, Mfana Elphus (2005) Restitution of land for agricultural development Ehlanzeni region Mpumalanga. [USQ Project]

Welsh, Trevor James (2005) Reverse osmosis water purification unit: for government and non-government use in disaster relief. [USQ Project]

Steyn, Marius (2007) Review and redesign of Pilbara Iron 24MTA conveyor system. [USQ Project]

Jeffery, Simon (2009) Review of failure mode, effect and criticality analysis (FMECA) on major equipment of the crushing and screening plant at the BORAL Quarry at Ormeau, Queensland. [USQ Project]

Yap, Fui It (2004) Review of the current timber industry in Malaysia. [USQ Project]

Choi, Richard Fun Yiu (2005) Review of the jet grouting method. [USQ Project]

Holzner, Katherine (2014) Rigid central safety barriers in constrained road environment. [USQ Project]

MacGregor, Cameron Scott (2004) Risk mapping in the Condamine River catchment basin. [USQ Project]

Harrison, Elissa Louise (2005) Road stabilisation issues in southern district of the Department of Main Roads, Queensland. [USQ Project]

Clarke, Adam James (2012) Robust deadbeat control of the non-linear magnetic levitation system using adaptive control techniques. [USQ Project]

Cheong, Siew Hong (2004) Role of a project manager in a residential development housing development in Singapore - Analyse the use of bar code in tracking drawing during the construction of a residential development in Singapore. [USQ Project]

Lamari, Alfio Concetto (2008) Rolling stock bearing condition monitoring systems. [USQ Project]

Zahl, Michael Stuart (2013) RTK GNSS in cadastral surveying. [USQ Project]

Taylor, Timothy Noel (2008) Rural arterial road operating speed assessment. [USQ Project]

Franks, Chris (2014) Safety and efficiency benefits of implementing zip merge treatments in NSW. [USQ Project]

Jong, Hua Kwan (2004) Safety management system. [USQ Project]

Hemming, Steven (2012) Sandwich panels for slab applications. [USQ Project]

Hopson, Matthew (2009) SCADA and RFI interference on RTK surveys. [USQ Project]

Ennis, Rodney James (2013) ScramSpace hypersonic aerodynamic drag coefficient (CD) determined by free-flight experiments at TUSQ wind-tunnel. [USQ Project]

Armstrong, Andrew Jonathan (2009) Sealing works performance study. [USQ Project]

Kamaruddin, Kamarul Faisal (2006) Security performance of a wireless LAN testbed. [USQ Project]

Choo, Yeun Feong (2004) Seismic stability of slope. [USQ Project]

Mauger, Travis William (2004) Selection of an engine and design of the fuelling system for a Formula SAE car. [USQ Project]

Scobie, Michael (2006) Sensitivity of capacitance probes to soil cracks. [USQ Project]

Cooper, David (2015) Sensor platform for monitoring conveyor belt rollers. [USQ Project]

Eckard, Lawrence Francois (2009) Setting up an engineering asset management system for a small local government council. [USQ Project]

Woods, Evan Arthur (2004) Shear strengthening and model testing of concrete bridge headstocks. [USQ Project]

Jobling, Lindsay Peter (2004) Shear strengthening of headstocks using prestressed fibre strips. [USQ Project]

Pillay, Ravindra Sen (2005) Short-term water demand forecasting for production optimisation. [USQ Project]

Lee, Wai Hung (2007) Shrinkage reduction of thermoset matrix particulate reinforced composites during hardening using low power microwave. [USQ Project]

Hugo, Sarah (2009) Simulation and analysis of MIMO-OFDM for a 4G cellular network. [USQ Project]

Birch, Byrenn James Colin (2013) Simulation of fibre Bragg grating (FBG) reflection spectrums using OptiGrating. [USQ Project]

Tart, Benjamin (2008) Simulation of GPS car navigation systems in evaluating the impact of poor quality road data. [USQ Project]

du Preez, Matthew (2012) Simulation of monolayer distribution for use in evaporation reduction. [USQ Project]

Campbell, Eyre (2013) Simulation of sawmill yields at Hyne Tuan Pine Mill. [USQ Project]

Muir, Paul John (2007) Siphons as furrow irrigation measurement devices. [USQ Project]

Ng, Chan Man (2004) Site formation works for Shek Mun development. [USQ Project]

Herriman, Kayne (2013) Small compressed air energy storage systems. [USQ Project]

Harriman, Adam J. (2011) Smart Grid for tomorrow’s electricity distribution. [USQ Project]

Ong, Gimhua (2005) Software development for power system analysis. [USQ Project]

Warne, Daniel (2004) Software radio architectures - part 2. [USQ Project]

Dunbar, Barry (2006) Software simulator development for orthogonal frequency division multiplexing (OFDM) modulation. [USQ Project]

Lusk, Benjamin Geoffrey (2004) Soil amendments to improve playability and reduce injury risks on sporting fields. [USQ Project]

Wieck, Travis (2012) Soil chemistry equilibrium as influenced by solution volume and concentration. [USQ Project]

Coverdale, Constance (2015) Soil nitrogen supply rates during a cotton season. [USQ Project]

George, Timothy Colin (2015) Soil pore blockage as influenced by livestock effluent with specific focus on colloids. [USQ Project]

Harris, Bruce Robert (2008) South East Queensland waterways, land use and slope analysis. [USQ Project]

Smith, Mitchell (2015) Southeast Queensland storm tide response to ex tropical cyclone Oswald. [USQ Project]

McGovern, Mark (2005) Spatial analysis of Tasmanian Devil facial tumour disease. [USQ Project]

Dunwoody, John Ernest (2007) Spatial analysis of woody vegetation land cover change in Crows Nest Shire, QLD. [USQ Project]

Watts, David Michael Graeme (2006) Speaker identification - prototype development and performance. [USQ Project]

Hugo, David (2008) Speech compression system for student feedback. [USQ Project]

Willmott, Peter (2005) Stabilisation of Goulburn Valley soils for the improvement of subgrades in new low traffic pavement construction. [USQ Project]

Dudley, Samuel (2011) Stability of underground tunnelling using relaxation techniques. [USQ Project]

de Freitas Pessoa, Daniel (2015) STATCOM DC bus voltage control and switching strategy analysis. [USQ Project]

Coates, Gary (2009) Steering and suspension design for a SAE-A formula race car. [USQ Project]

Rayner, Leslie (2004) Steering design for a formula SAE-A open wheel race car. [USQ Project]

Popa, Cristina Elena (2005) Steering system and suspension design for 2005 formula SAE-A car. [USQ Project]

Freeman, Barry (2006) Steering system and suspension design for a formula SAE-A racer. [USQ Project]

Cox, Adam (2011) Stereo vision for webcams. [USQ Project]

Jones, Simon (2010) Stop-go mobile mapping. [USQ Project]

Morris, Anthony Brian (2006) Stormwater harvest and reuse for a wholesale nursery. [USQ Project]

Bolger, Paul (2006) Strengthening of headstocks with vertical clamping to enhance shear capacity. [USQ Project]

Field, Benjamin J. (2005) Stress analysis of axially loaded perforated steel plates by experimental and finite element methods. [USQ Project]

Gribble, Brett (2006) Stress relieving furnace modelling and analysis. [USQ Project]

Slack–Smith, David (2010) Structural design, quotation and production support using parametric CAD tools and national/international standards for fluid storage systems. [USQ Project]

Bajracharya, Rohan Muni (2010) Structural evaluation of concrete-expanded polystyrene sandwich panels for slab applications. [USQ Project]

Turner, Alan (2010) Structural performance of cross laminated timber panels as walls. [USQ Project]

Summerville, Cameron (2009) Structural performance of low grade timber slabs. [USQ Project]

Alajmi, Rashed (2015) Study on sisal fibres as insulator in building materials. [USQ Project]

Alajmi, Faisal (2015) Study on tribological performance of mild steel under canola bio-lubricant conditions. [USQ Project]

Couch, P. (2013) Subtransmission line cost reduction through optimised design, 132 kV Wellington-Dubbo case study. [USQ Project]

Kilian, Simone (2011) Sugarcane bagasse reinforced thermoplastic composites. [USQ Project]

Taylor, Patrick (2014) Supercritical carbon dioxide geothermal energy system analysis. [USQ Project]

Taylor, Patrick (2014) Supercritical CO2 geothermal energy system analysis. [USQ Project]

Muorwel, Reec Rodolfo (2008) Supervisory control of material handling conveyor belt system. [USQ Project]

Smith, Anthony Patrick (2009) Surveying and the law. [USQ Project]

Smeaton, Curtis (2015) Surveying applications of photogrammetric UAVs - a comparison with conventional survey techniques. [USQ Project]

Nawratzki, Guy (2010) Suspension development for a short circuit racing car. [USQ Project]

Price, David (2015) Sustainable road development and management. [USQ Project]

Pola, Nigel Peter (2010) Synthesis of modified phenolic resins using renewable materials for advanced composites in civil engineering structures. [USQ Project]

Nagel, Gregory (2014) System dependant IDMT settings: direct buried underground cable. [USQ Project]

Smith, Barton James (2006) System design for formula SAE-A racecar. [USQ Project]

Richardson, Kieran (2015) System design of a hydrogen induction system as a retrofit item compatible with existing internal combustion engines. [USQ Project]

Pasanduka, Timothy (2013) Systematic procedure to determine line current differential relay settings with back up distance for a 500 kV ac three phase line. [USQ Project]

Bolitho, Gary (2007) TDR probes for the measurement of root zone soil moisture. [USQ Project]

Cameron, Kirsty (2010) Technical feasibility of a salinity trading scheme for the licensing of coal mine discharges in the Fitzroy Basin. [USQ Project]

McCarthy, Alison (2006) Telemetry and communication systems for irrigation management. [USQ Project]

McDowell, Nigel A. J. (2014) Teleprotection signalling over an IP/MPLS network. [USQ Project]

Zerbst, Samuel David William (2009) Temperature effects on a fibre reinforced polymer material. [USQ Project]

Shekhar, Shashi (2008) Tensile strength of sawdust reinforced phenolic resin composite materials. [USQ Project]

Zhong, Xiaoliang (2009) Tensile strength of sawdust reinforced vinyl ester composites. [USQ Project]

Edwards, D. (2014) Terrestrial laser scanning for 3D zone substation modelling and safety clearances. [USQ Project]

Light, Brenton (2014) Terrestrial laser scanning for building information modelling (BIM) development and application. [USQ Project]

Bryde, Andrew Robert (2006) Terrestrial photo modelling. [USQ Project]

Green, Christopher Ross (2007) Testing and analysis of fibre composite beams in a bridge structure. [USQ Project]

Harch, Nelson (2006) Testing mapping grade GPS carrier phase accuracy. [USQ Project]

Neubauer, Aaron John (2006) Testing of current flooring systems and materials. [USQ Project]

Chua, Chun Siong (2004) Testing of robotic total stations for dynamic tracking. [USQ Project]

Garget, Dennis (2005) Testing of robotic total stations for dynamic tracking. [USQ Project]

Kiongoli, Said (2010) Testing the accuracy of machine guidance in road construction. [USQ Project]

Baker, Philip James (2009) The 50 kph speed limit in residential Toowoomba. [USQ Project]

Deas, Scott (2009) The accuracy of published co-ordinates on the 'Survey Mark Enquiry Service’(SMES)in Victoria using GPS observations. [USQ Project]

Power, Scott (2014) The affect of lighting interchange ramps on safety – a study of the M1. [USQ Project]

Rackemann, Benjamin (2011) The analysis and redesign of the spraycam sprayer to incorporate fibre composite pultrusions. [USQ Project]

Rasphone, Akchousanh (2004) The analysis of Neighbourhood Watch structure using Geographic Information System (GIS). [USQ Project]

Knox, Soz Deja (2005) The autonomous unmanned aerial surveillance vehicle navigation and user interface. [USQ Project]

McDonald, Scott (2005) The behaviour of hybrid fiber composite beams. [USQ Project]

Nelder, Ken (2004) The bodywork package for the USQ's Formula-SAE racer. [USQ Project]

Cech, Samuel (2008) The commercial implications of the NZ surveyor-general's rules for cadastral survey 2008. [USQ Project]

Marstella, Joseph Edward (2010) The concept, analysis and critical thinking involved in flow net theory - a project based learning approach using cofferdams. [USQ Project]

Maruping, Pako The design and construction of a large scale-force feedback joystick for the use in physiotherapy. [USQ Project]

Salomon, Jake (2010) The design and construction of an exercise device for use in physiotherapy of the arm. [USQ Project]

Kruger, Scott (2006) The design and optimisation of a prototype sailplane. [USQ Project]

Breust, Tristan David (2006) The design and structural analysis of a steel portal framed shed for the Darling Downs Historical Rail Society. [USQ Project]

Clarke, Daniel John (2006) The design of a three point linkage implement height control system. [USQ Project]

Delisser, Anthony Ellis (2004) The development and implementation of a knowledge management system for the NDCG access line of business. [USQ Project]

Morrison, Scott James (2010) The development and testing of a high precision ellipsoidal - Australian height datum deformation grid for real time GPS applications. [USQ Project]

Prasser, Nathan (2008) The development of a computer based system for the rehabilitation of arm movements of stroke patients. [USQ Project]

Ledger, Allen (2011) The development of a high precision terrestrial laser scanner calibration range at USQ. [USQ Project]

Janse van Rensburg, Barnard (2013) The development of a light weight composite conveyor belt idler roller. [USQ Project]

Silva, Alan Grant Lance (2004) The development of a new multi-directional fall arrest device. [USQ Project]

Kirkland, Rhys (2010) The development of a small scale gas turbine to assist in the analysis of coal seam gas as an alternative stationary jet fuel for Australia. [USQ Project]

Haenke, Michael (2010) The development of a wind and solar power calculator for use within the private sector. [USQ Project]

Garratt, Blythe Jonathan (2009) The development of a wrist rehabilitation device for movement therapy. [USQ Project]

Carden, Scott Benjamin (2008) The development of an antigravity arm to assist in the rehabilitation of stroke patients. [USQ Project]

Spilsbury-Brinkmann, Casey (2013) The economic feasibility of upgrading Moree’s light industrial area to legally cater for restricted access vehicles. [USQ Project]

Krinke, Mark James (2004) The effect of admixtures in concrete containing manufactured sand. [USQ Project]

Weatherley, Mark Geoffrey (2007) The effect of compaction on the design life of rehabilitated insitu cement powder stabilised pavements. [USQ Project]

Lim, Pei Li (2004) The effect of compression ratio on the CNG-diesel engine. [USQ Project]

Zeimer, Ashley Karl (2004) The effect of DC current on power transformers. [USQ Project]

Madanavosa, Savenaca (2013) The effect of efflorescence on the mechanical properties of geopolymers. [USQ Project]

Braden, Ashleigh (2015) The effect of fibres on the properties of concrete with oil contaminated sand. [USQ Project]

King, Bernie-Anne (2014) The effect of road roughness on traffic speed and road safety. [USQ Project]

Goodall, Joshua Edward Allan (2008) The effect of the 50km/h implementation on local streets in Toowoomba. [USQ Project]

Rennie, Tristan James (2009) The effect of vandalism on fibre composite structures. [USQ Project]

Massaro, Aaron (2006) The effect of water ratio on the mechanical properties of refactory materials. [USQ Project]

Holloway, Stephen John (2006) The effect of wide open bays on legal boundaries. [USQ Project]

Mylne, George (2007) The effectiveness of a multiple-frequency global navigation satellite system (GNSS)on multipath mitigation. [USQ Project]

Drysdale, Dirk MacDonald (2008) The effectiveness of an aerofoil shaped pier reducing down stream vortices and turbulance. [USQ Project]

Millers, Paul Gordon (2010) The effects of small distributed generation on the electrical distribution network. [USQ Project]

Searle, Joshua (2011) The efficient use of building mechanical services for saving energy. [USQ Project]

Tomasel, Aden (2014) The energy storage potential of a hybrid renewable generation grid connected to a pumped hydro-generation plant for effective connection into the energy market, off peak switchable developing load demand market and act as ancillary regional voltage support and bulk water supply. [USQ Project]

Lieschke-Mercer, Yvette (2015) The feasibility of using constructed wetlands systems for urban wastewater. [USQ Project]

Chan, Auc Fai (2006) The finite difference time domain method for computational electromagnetics. [USQ Project]

Goodger, Anthony Maldon (2004) The formation of nitrogen oxides in a pulverised coal boiler. [USQ Project]

Mattsson, Bradley I (2015) The identification of all rights, obligations, and restrictions on freehold land in South Australia. [USQ Project]

Miller, Nadya (2014) The impact of a new light rail network upon walkability in a central business district. [USQ Project]

Stager, Martin Franz (2014) The impact of compact urban form on the provision of public road transport. [USQ Project]

Leong, Weng Wah (2005) The impact of trenching on urban road operation and maintenance. [USQ Project]

Day, Michael Peter (2010) The implications regional ecosystem mapping has on land development proposals in rural Queensland. [USQ Project]

French, Vivienne Joyce (2005) The investigation into modes of failure of total hip replacements. [USQ Project]

Harch, Brian Joseph Luke (2010) The investigation into the optimisation of cross laminated timber panels for use in the Australia building industry. [USQ Project]

Black, Gerard Wiiliam (2012) The investigation of the sustainability of a regional approach to Water Sensitive Urban Design using a Triple Bottom Line Assessment. [USQ Project]

Waldock, David A. (2008) The maintenance of 'moment continuity' within structural concrete beam steps. [USQ Project]

Adams, Nicholas John (2008) The pedestrianisation of inner city Toowoomba. [USQ Project]

Mohamed Ibrahim, Saifudin Bin (2005) The PID controller design using genetic algorithm. [USQ Project]

Wilcox, Colin Gordon (2004) The private surveyor as a spatial data custodian in the local community. [USQ Project]

Wilson, David Orme (2005) The resolution of uncertain boundaries at Amity Point (North Stradbroke Island). [USQ Project]

Smith, Wesley (2013) The role of private enterprise in transforming the water, sanitation and hygiene sector in rural sub-Saharan Africa. [USQ Project]

Whittaker, Adam (2012) The safety benefit of continuous narrow painted median strips. [USQ Project]

Bates, Matthew (2012) The selection of inegrated and sustainable waste processing techniques for application within Indonesia. [USQ Project]

Atem, Thiew (2011) The skid mounted substation. [USQ Project]

Carey, Tyler (2014) The thermal performance of an earth sheltered shipping container. [USQ Project]

Law, Bee Bee (2005) The usage of domestic water filtration systems in Malaysia. [USQ Project]

Wall, Adrian (2009) The use of a terrestrial laser scanner in an open cut mining environment. [USQ Project]

Seccombe, Andrew James (2010) The use of Fibre Bragg Grating (FBG) sensors in geotechnical applications. [USQ Project]

Fraser, Timothy (2004) The use of industry by-products in the treatment of acid sulfate soils. [USQ Project]

Belbin, Heidi (2015) The use of low-cost photogrammetry techniques to create an accurate model of a human skull. [USQ Project]

Chiu, Kwong Man Karen (2006) The use of recycled concrete aggregate in structural concrete around South East Queensland. [USQ Project]

Hansen, Luke (2007) The use of waste cooking oil as an alternative fuel for the diesel engine. [USQ Project]

Kraljik, David (2014) The value of public space – a town square in a small urban community. [USQ Project]

Pejakovic, Derek (2006) Theatre booking system. [USQ Project]

Flannery, Aiden Michael (2015) Thermally insulated structural sandwich panels for roofing applications. [USQ Project]

Earl, David (2005) To determine if there is a correlation between the shrink swell index and atterberg limits for soils within the Shepparton Formation. [USQ Project]

Dugdell, David Thomas (2007) Toowoomba road network review. [USQ Project]

Sweeney, Juliana (2014) Topological optimisation of large reinforced concrete box culverts under SM1600 loads. [USQ Project]

O'Donnell, Clayton (2007) Total effect on the environment of electric/hybrid electric vehicle batteries. [USQ Project]

Ole, Zayne Kristian (2008) Track stability and buckling - rail stress management. [USQ Project]

Langdon, Aaron G. (2009) Traffic induced moisture entry into road pavements. [USQ Project]

West, Jared (2015) Transitioning roadways from high-speed to low-speed environments when approaching regional towns in North Queensland. [USQ Project]

Sercombe, David B. (2004) Transverse injection from a hypersonic cone. [USQ Project]

Johnston, Kristine Leigh (2006) Treatment of mine water with colloidal suspensions. [USQ Project]

Piper, A. G. (2004) Turf monitoring technology to aid in benchmarking and maintenance of sporting fields. [USQ Project]

Kronk, Matthew Neil (2006) Ultimate strength of steel-concrete composite beams under combined bending and torsion. [USQ Project]

Kwok, Keen Whale (2007) Understanding progressive collapse and its effect to structural design. [USQ Project]

Green, Matthew (2015) Uniformity performance of non-standard overlapped center pivot and lateral move sprinklers. [USQ Project]

Timings, James (2013) Unmanned aerial vehicle static object detection. [USQ Project]

Ellis, S. (2013) Upgrade of datalogger system. [USQ Project]

Downing, Matthew (2010) Upon the construction of a remote controlled tracked reconnaissance vehicle. [USQ Project]

Lonard, Craig Stephen (2012) Urban fringe agriculture and its potential contribution to sustainable cities: a case study of Western Sydney. [USQ Project]

Shellshear, Michael Stuart (2008) Urban stormwater treatment using chitosan. [USQ Project]

Sutcliffe, John William (2013) Urban wind turbine characterization system. [USQ Project]

Duncan, Jeremy Bruce (2010) USB camera pedestrian counting. [USQ Project]

Rizzo, Giuseppe (2015) Use of biochar geostructures for urban stormwater water cleanup. [USQ Project]

Coulter, Allison Kerrie-Anne (2009) Use of Fiber Bragg grating sensors in structural health monitoring. [USQ Project]

Bernier, Amy (2015) Use of fibre-optic (FBG) sensors in structural health monitoring – high grade reinforced concrete beams. [USQ Project]

Fairbanks-Smith, Michael S. (2014) Use of fibre-optic (FBG) sensors in the structural health monitoring of a battlefield helicopter rotor blade. [USQ Project]

Lenton, Paul (2011) Use of near-infrared photogrammetry to determine crack and surface deformation in small structures. [USQ Project]

Gitau, Samuel Kimani (2004) Use of road asset maintenance planning software in QDMR. [USQ Project]

Wong, Chuan Mein (2004) Use of short fibres in structural concrete to enhance mechanical properties. [USQ Project]

Heaton, Erin (2011) Use of vibration signature in structural health monitoring (composite/internal damages). [USQ Project]

Kelderman, Simon (2015) Using a sprinkler infiltrometer and the GAML model to predict moving sprinkler performance in the field. [USQ Project]

Byrd, B. (2014) Using desktop hydrologic data to predict fish presence in streams in northern British Columbia. [USQ Project]

Wong, Alan (2005) Using GIS to explore the relationship between road grade and accidents. [USQ Project]

Arnison, Christopher John (2009) Using ground penetrating radar (GPR) with multiple pass scans to improve 3D positional reliability of subterranean features. [USQ Project]

Yin, Matthew (2011) Using local gravel sources and granular stabilisation for the production of pavement gravels in the Toowoomba region. [USQ Project]

Figg, Matthew Lorne (2006) Using renewable plantation timber as a replacement option for unrenewable hardwood girders in bridges. [USQ Project]

Nixon, Phillip (2011) Using sun observations to set an azimuth combining and comparing Automatic Target Recognition in a Total Station with GPS observed time and position. [USQ Project]

Davidson, Thomas Peter George (2007) Using tensile tests as benchmark, investigate the best percentage by weight of slg, as fillers, in Phenolic resins post-cured by microwaves. [USQ Project]

Watt, Andrew Thomas (2008) Validation of cooling grid model and testing of alternatives. [USQ Project]

Black, Jamie Richard (2008) Validation of the Sydnet, continuously operating reference stations for use in global navigation satellite system surveying. [USQ Project]

Sahay, Akshay Jaishil (2014) VAR controller for STATCOM solar inverter. [USQ Project]

Shann, Blaise N. (2008) Variable rate bitumen spraying in road construction and resurfacing. [USQ Project]

Bellars, Andrew (2015) Vehicle energy usage. [USQ Project]

Chong, Chuen Kiong Frederick (2005) Vehicle undercarriage scanning system. [USQ Project]

Vella, Anthony (2006) Ventilation of highwall mining to control methane concentration at the Moura Mine. [USQ Project]

Prasad, Nitesh Nitin (2011) Verification of simplified optimum designs for reinforced concrete beams. [USQ Project]

Stoeckl, Wayne Edmund (2006) Viability of a coordinated cadastre in New South Wales. [USQ Project]

Farmer, Belinda (2005) Video compression using ITU-T recommendation H.264. [USQ Project]

Marais, Tom (2008) Virtual reference station (VRS) in South Africa. [USQ Project]

Caudell, Clinton Frank (2010) Visualising traditional boundaries in Papua New Guinea using GIS 'zones of uncertainty'. [USQ Project]

Yadav, Orunganti Vara Prasad (2014) Voltage control in micro-grids. [USQ Project]

Heron, Katherine Margaret Monica (2007) Vortex shedding on bridge piers. [USQ Project]

Fraser, Carl (2015) Vulnerability of bridges in extreme flood events based on element failure. [USQ Project]

Kang, Boon Geh (2007) Wall climbing robot. [USQ Project]

Weinheimer, Ina (2015) Wastewater treatment using tidal flow wetlands. [USQ Project]

Wallace, Darren James (2006) Water and wastewater strategic township plan Warragul, Victoria. [USQ Project]

Chan, Siew-Yuen (2006) Water leakage detection circuit in external chiller unit. [USQ Project]

Kenna, Brian (2008) Water metering and revenue protection. [USQ Project]

Spurling, Harrison (2013) Water sensitive urban design for sustainable road development. [USQ Project]

Gaffney, Allister Henry (2013) Water sensitive urban design for the Spring Creek catchment and MUSIC sensitivity analysis. [USQ Project]

Loh, Shiau Ping (2004) Watermarking for securing digital media content. [USQ Project]

Downey, Kym Therese (2006) Weather induced changes on domestic water consumption. [USQ Project]

McDonald, Adam John (2004) Which geoid model should be used for GPS heighting on the Toowoomba bypass project? [USQ Project]

Johnston, George Finlay (2007) Wildlife vehicle collision GIS mapping & modelling. [USQ Project]

Johnstone, C. (2013) Wireless communication between dataNode systems. [USQ Project]

White, Christopher (2013) Wireless grain silo monitoring and control. [USQ Project]

Palmer, John Michael (2012) Wireless LAN based infrared remote control. [USQ Project]

Sim, Lee Kheng Shirley (2004) XML based online traffic information. [USQ Project]

This list was generated on Sat Aug 27 02:29:33 2016 EST.