Items where Subject is "290000 Engineering and Technology > 291100 Environmental Engineering > 291104 Environmental Technologies"

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors Name | Item Type
Jump to: A | D | F | G | H | M | O | P | S | T | W | Y | Z
Number of items at this level: 23.


Ahmad, Abdul Hamid (2007) Life cycle assessment in semiconductor foundry. [USQ Project]


Donohue, Rachael Michelle (2008) Inspiring high precision dam water depth measurement with novel 'bubbler’ designs. [USQ Project]

Dunwoody, John Ernest (2007) Spatial analysis of woody vegetation land cover change in Crows Nest Shire, QLD. [USQ Project]

Dyke, Geoffrey Wayne (2005) Optimising condenser air extraction to reduce greenhouse gas emissions at the Loy Yang B power station. [USQ Project]


Fraser, Timothy (2004) The use of industry by-products in the treatment of acid sulfate soils. [USQ Project]


Gallagher, Tony (2007) Clear zones in urban environments. [USQ Project]

Goodger, Anthony Maldon (2004) The formation of nitrogen oxides in a pulverised coal boiler. [USQ Project]

Grassick, Bruce (2006) Design and construction of a solar collector for teaching purposes. [USQ Project]


Hamid, H. A. and Yusaf, T. and Yusof, Z. M. (2006) An investigation on the improvement of the operation of Tenom Pangi HPP cooling power system. In: International Conference on Energy and Environment 2006 (ICEE 2006), 28-30 Aug 2006, Kajang, Malaysia.

Hoque, M. A. and Aravinthan, V. and Porter, M. (2008) Respirometric and titrimetric techniques for monitoring aerobic biodegradation of surfactant. In: ISBT 2008: 1st International Society of BioTechnology Conference, 28-30 Dec 2008, Gangkor, India.


Miletic, Alista (2005) Current controller for inverter bridge designed for grid-connected photovoltaic system. [USQ Project]

Misra, R. K. and Hood, Sarah (2007) Desktop review of Polyacrylamide use in the Australian cotton industry. Technical Report. University of Southern Queensland, National Centre for Engineering in Agriculture , Toowoomba, Australia. [Report]

Mohr, Logan (2007) Effects and controls of lateral refraction in underground coal mines. [USQ Project]


Ong, Chin How (2007) Life cycle assessment of cement in Malaysia. [USQ Project]


Parsons, David (2007) The environmental impact of disposable versus re-chargeable batteries for consumer use. International Journal of Life Cycle Assessment, 12 (3). pp. 197-203. ISSN 0948-3349


Seilsepour, Mohsen and Rashidi, Majid and Khabbaz, Borzoo Ghareei (2009) Prediction of soil exchangeable sodium percentage based on soil sodium adsorption ratio. American-Eurasian Journal of Agricultural and Environmental Sciences, 5 (1). pp. 1-4. ISSN 1818-6769

Sharma, Ronald (2007) Single-phase transformerless unipolar switched inverters for utility-connected photovoltaic applications. [Thesis (PhD/Research)]

Sohn, Jae Ho and Smith, R. J. and Yoong, Ernest (2006) Process studies of odour emissions from effluent ponds using machine-based odour measurement. Atmospheric Environment, 40 (7). pp. 1230-1241. ISSN 1352-2310


Tan, Heng Tsin Stanley (2007) Recycling of used electronics in Singapore. [USQ Project]


Wei, Lay Kian (2007) Life cycle assessment of CSR autoclaves lightweight concrete production in Malaysia. [USQ Project]

Wiltshire, Mark (2005) Greywater reuse in urban areas. [USQ Project]


Yusaf, Talal and Yusoff, Mohammed Zamri (2000) Development of a 3D CFD model to investigate the effect of the mixing quality on the CNG-diesel engine performance. In: The International Conference and Exhibition and Natural Gas Vehicles, 17-19 Oct 2000, Yokohama, Japan.


Zhu, SongPing and Strunin, Dmitry V. (2002) A numerical model for the confinement of oil spill with floating booms. Spill Science and Technology Bulletin, 7 (5-6). pp. 249-255. ISSN 1353-2561

This list was generated on Mon Oct 24 23:39:10 2016 EST.