Browse by Fields of Research (ANZSRC 2020)

Zangana, Sartip and Epaarachchi, Jayantha and Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Leng, Jinsong and Schubel, Peter (2021) Behaviour of continuous fibre composite sandwich core under low-velocity impact. Thin-Walled Structures, 158:107157. pp. 1-11. ISSN 0263-8231

Eayal Awwad, K. Y. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Fallahnezhad, Khosro and Saleh, Khalid and Zeng, Xuesen (2021) Influence of Graphene Nanoplatelets on Mechanical Properties and Adhesive Wear Performance of Epoxy-Based Composites. Friction, 9 (4). pp. 856-875. ISSN 2223-7690

Li, Lujuan (2021) Structural composition and mechanical performances of poly (vinyl alcohol) materials: experimental and molecular dynamics simulation studies. [Thesis (PhD/Research)]

Zanagan, Sartip and Epaarachchi, Jayantha and Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Leng, Jinsong (2020) A novel hybridised composite sandwich core with glass, kevlar and zylon fibres – investigation under low-velocity impact. International Journal of Impact Engineering, 137:103430. pp. 1-10. ISSN 0734-743X

Alajarmeh, O. S. and Manalo, A. C. ORCID: https://orcid.org/0000-0003-0493-433X and Benmokrane, B. and Karunasena, K. ORCID: https://orcid.org/0000-0003-3636-3068 and Ferdous, W. ORCID: https://orcid.org/0000-0002-4473-4722 and Mendis, P. (2020) Hollow concrete columns: review of structural behavior and new designs using GFRP reinforcement. Engineering Structures, 203:109829. pp. 1-16. ISSN 0141-0296

Alajarmeh, Omar S. and Manalo, Allan C. ORCID: https://orcid.org/0000-0003-0493-433X and Benmokrane, Brahim and Karunasena, Warna ORCID: https://orcid.org/0000-0003-3636-3068 and Mendis, Priyan (2020) Effect of spiral spacing and concrete strength on behavior of GFRP-reinforced hollow concrete columns. Journal of Composites for Construction, 24 (1):04019054. pp. 1-14. ISSN 1090-0268

Alajarmeh, O. S. and Manalo, A. C. ORCID: https://orcid.org/0000-0003-0493-433X and Benmokrane, B. and Vijay, P. V. and Ferdous, W. ORCID: https://orcid.org/0000-0002-4473-4722 and Mendis, P. (2019) Novel testing and characterization of GFRP bars in compression. Construction and Building Materials, 225. pp. 1112-1126. ISSN 0950-0618

Herath, H. M .C. M. ORCID: https://orcid.org/0000-0002-6796-0802 and Epaarachchi, J. A. and Islam, M. M. and Al-Azzawi, W. and Leng, J. and Zhang, F. (2018) Structural performance and photothermal recovery of carbon fibre reinforced shape memory polymer. Composites Science and Technology, 167. pp. 206-214. ISSN 0266-3538

Turner, Paul and Liu, Tao and Zeng, Xuesen and Brown, Kevin (2018) Three-dimensional woven carbon fibre polymer composite beams and plates under ballistic impact. Composite Structures, 185. pp. 483-495. ISSN 0263-8223

Ermakov, Andrei M. and Bauer, Svetlana M. (2016) Mathematical modelling of applanation tonometry for intraocular pressure measurements. In: 55th ASMR National Scientific Conference: Next Generation Healthcare - Merging Biology and Technology , 13-15 Nov 2016, Gold Coast, Australia.

Turner, P. and Liu, T. and Zeng, X. (2016) Collapse of 3D orthogonal woven carbon fibre composites under in-plane tension/compression and out-of-plane bending. Composite Structures, 142. pp. 286-297. ISSN 0263-8223

Ghabraie, Kazem (2015) An improved soft-kill BESO algorithm for optimal distribution of single or multiple material phases. Structural and Multidisciplinary Optimization, 52 (4). pp. 773-790. ISSN 1615-147X

Ghabraie, Kazem (2015) An improvement technique for bi-directional evolutionary structural optimisation (BESO) method. In: 11th World Congress on Structural and Multidisciplinary Optimisation: Advances in Structural and Multidisciplinary Optimization (WCSMO-11), 7-12 June 2015, Sydney, Australia.

Boeing Aircraft Co. (2015) Signal monitoring system for monitoring strain applied to a composite component. .

Epaarachchi, Jayantha and Canning, John and Leng, Jinsong and Lau, Alan and Mendis, Priyan, eds. (2015) Nano technology and smart sensors for structural health monitoring [Special issue of Structural Health Monitoring, Vol. 14, No. 2, March 2015]. Sage Publications, United Kingdom.

Li, Qiang and Hua, Fuan and Li, Jianping and Wang, Hao (2015) Research difference of strain distribution and microstructure evolution between rolling direction and transverse direction of AM50 Mg alloy plate by digital image correlation. Advances in Materials Science and Engineering, 2015. ISSN 1687-8434

Strunin, D. V. (2014) On dissipative nature of elastic waves. Journal of Coupled Systems and Multiscale Dynamics, 2 (2). pp. 70-73. ISSN 2330-152X

Banerjee, Sourish ORCID: https://orcid.org/0000-0001-5446-5290 (2014) On the mechanical properties of hierarchical lattices. Mechanics of Materials, 72. pp. 19-32. ISSN 0167-6636

Orange, Lachlan (2013) Projectile impacts on hardened alloy steel plate. [USQ Project]

Ermakov, A. M. (2013) Stress-strained state and the stability of a spherical segment under the influence of a load with a flat base. In: 26th Nordic Seminar on Computational Mechanics, 23–25 Oct 2013, Oslo, Norway.

Bauer, Svetlana and Ermakov, Andrei (2013) Buckling of a spherical segment under the flat base load. In: 2nd International Conference on Optimization and Analysis of Structures (OAS 2013), 25–27 Aug 2013 , Tartu, Estonia.

Albdiry, Mushtaq T. and Yousif, Belal F. ORCID: https://orcid.org/0000-0003-3847-5469 and Ku, Harry (2013) Fracture toughness and toughening mechanisms of unsaturated polyester-based clay nanocomposites. In: 13th International Conference on Fracture (ICF 2013), 16-21 Jun 2013, Beijing, China.

Zhuge, Yan (2013) A review of aerogels and their application as a multi-functional building material. Applied Mechanics and Materials, 253-255. pp. 564-567. ISSN 1660-9336

Ermakov, Andrei M. (2013) Numerical and analytical modeling of the stability of the cylindrical shell under the axial compression with the use of the non-classical theories of shells. Lecture Notes in Computer Science, 8236. pp. 279-286. ISSN 0302-9743

du Preez, Matthew (2012) Simulation of monolayer distribution for use in evaporation reduction. [USQ Project]

Ermakov, A. (2012) The models of nonclassical anisotropic spherical shells. In: 38th Solid Mechanics Conference, 27–31 Aug 2012, Warsaw, Poland.

Meor Said, Mior Azman (2012) In-cylinder radiation heat transfer in a small direct injection diesel engine. [Thesis (PhD/Research)]

Ermakov, A. M. (2012) On the stability of the cylindrical shell under the axial compression with use of non-classical theories of shells. In: 8th European Solid Mechanics Conference (ESMC-2012) , 9-13 July 2012, Graz, Austria.

Bauer, Svetlana M. and Ermakov, Andrei M. and Kashtanova, Stanislava V. and Morozov, Nikita F. (2011) Evaluation of the mechanical parameters of nanotubes by means of nonclassical theories of shells. In: Shell-like structures. Advanced Structural Materials, 15. Springer-Verlag, Heidelberg, Germany, pp. 519-530. ISBN 978-3-642-21854-5

Bauer, S. M. and Ermakov, A. M. and Kashtanova, S. V. and Morozov, N. F. (2011) Application of nonclassical models of shell theory to study mechanical parameters of multilayer nanotubes. Vestnik: Mathematics (St.Petersburg University) , 44 (1). Article 13. ISSN 1063-4541

Banerjee, Sourish ORCID: https://orcid.org/0000-0001-5446-5290 (2011) Creep response of polymeric honeycombs. In: 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX), 14-17 Jan 2011, Auckland, New Zealand.

Bauer, Svetlana M. and Ermakov, Andrei M. and Kashtanova, Stanislava V. and Morozov, Nikita F. (2011) Nonclassical models in the shell theory with applications to multilayered nanotubes. In: 3rd ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2011), 25-28 May 2011, Corfu, Greece.

Banerjee, S. ORCID: https://orcid.org/0000-0001-5446-5290 and Battley, M. and Bhattacharyya, D. (2010) Shear strength optimization of reinforced honeycomb core materials. Mechanics of Advanced Materials and Structures, 17 (7). pp. 542-552. ISSN 1537-6494

Rao, Sanjeev and Banerjee, Sourish ORCID: https://orcid.org/0000-0001-5446-5290 and Jayaraman, Krishnan and Bhattacharyya, Debes (2010) Compressive behavior of fibre reinforced honeycomb cores. In: 2008 IUTAM Symposium on Multi-Functional Material Structures and Systems, 10-12 Dec 2008, Bangalore, India.

Bauer, S. M. and Ermakov, A. M. and Kotliar, K. E. and Voronkova, E. B. (2010) Biomechanical analysis of parameters influencing pressure-volume relationship in the human eye. In: 2010 Association for Research in Vision and Ophthalmology Annual Meeting (ARVO 2010), 2-6 May 2010, Fort Lauderdale, Florida, USA.

Nasir, T. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and McWilliam, S. and Salih, N. D. and Hui, L. T. (2010) An artificial neural network for prediction of the friction coefficient of multi-layer polymeric composites in three different orientations. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (2). pp. 419-429. ISSN 0954-4062

Wong, K. J. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Low, K. O. and Ng, Y. and Tan, S. L. (2010) Effects of fillers on the fracture behaviour of particulate polyester composites. Journal of Strain Analysis for Engineering Design, 45 (1). pp. 67-78. ISSN 0309-3247

Voronkova, E. and Bauer, S. and Ermakov, A. (2009) Tonometric estimation of mechanical properties of a cornea and sclera. In: 2009 Association for Research in Vision and Ophthalmology Annual Meeting (ARVO 2009), 3-7 May 2009, Fort Lauderdale, Florida, USA.

Gill, N. Singh and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2009) Wear and frictional performance of betelnut fibre-reinforced polyester composite. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (2). pp. 183-194. ISSN 1350-6501

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2009) Frictional and wear performance of polyester composites based on coir fibres. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (1). 51 -59. ISSN 1350-6501

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Leonard, L. W. H. and Wong, K. J. and Low, K. O. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2009) Fracture behaviour of glass fibre-reinforced polyester composite. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 223 (2). pp. 83-89. ISSN 1464-4207

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao, eds. (2009) Futures in mechanics of structures and materials: proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), Toowoomba, Australia, 2-5 December 2008. Taylor & Francis (CRC Press), London, United Kingdom. ISBN 978-0-415-49196-9

Goh, S. and Ku, H. and Ang, S. L. (2008) Prediction of crushing stress in composite materials. Journal of Composite Materials, 42 (5). pp. 467-484. ISSN 0021-9983

Ermakov, A. M. (2008) Stress--strain state of the sclera and cornea as orthotropic non-uniform conjugated spherical shells. Russian Journal of Biomechanics, 13 (1):43. pp. 47-58. ISSN 1812-5123

Khennane, Amar and Tran-Cong, Thanh (2007) Timoshenko beam-solution in terms of integrated radial basis functions. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

Ahfock, Tony L. and Hewitt, Andrew (2005) Modeling of the solid rotor induction motor. In: AUPEC 2005: 15th Australasian Universities Power Engineering Conference, 25-28 Sep 2005, Hobart, Australia.

Baker, Graham (2005) Thermodynamics in solid mechanics: a commentary. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, A363 (1836). pp. 2465-2477. ISSN 1471-2962