Browse by Fields of Research (ANZSRC 2020)

Jahirul, M. I. and Rasul, M. G. and Brown, R. J. and Senadeera, W and Hosen, M. A. and Haque, R. and Saha, S. C. and Mahlia, T. M. I. (2021) Investigation of correlation between chemical composition and properties of biodiesel using principal component analysis (PCA) and artificial neural network (ANN). Renewable Energy, 168. pp. 632-646. ISSN 0960-1481

Mahale, Kiran Ramesh (2021) Utilisation of Australian pineapple (Ananas comosus) processing waste for the production of renewable energy. [Thesis (PhD/Research)]

Algayyim, Sattar Jabbar Murad and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 (2020) Comparative assessment of spray behavior, combustion and engine performance of ABE-biodiesel/diesel as fuel in DI diesel engine. Energies, 13 (24):6521. pp. 1-12.

Mei, Jun and Ayoko, Godwin A. and Hu, Chunfeng and Bell, John M. and Sun, Ziqi (2020) Two-dimensional fluorine-free mesoporous Mo2C MXene via UV-induced selective etching of Mo2Ga2C for energy storage. Sustainable Materials and Technologies, 25:e00156. ISSN 2214-9929

Yeom, Jong-Min and Deo, Ravinesh ORCID: https://orcid.org/0000-0002-2290-6749 and Adamowski, Jan F. and Chae, Taebyeong and Kim, Dong-Su and Han, Kyung-Soo and Kim, Do-Yong (2020) Exploring solar and wind energy resources in North Korea with COMS MI geostationary satellite data coupled with numerical weather prediction reanalysis variables. Renewable and Sustainable Energy Reviews, 119:109570. pp. 1-14. ISSN 1364-0321

Ahmed, Shakoor and Alam, Khorshed ORCID: https://orcid.org/0000-0003-2232-0745 and Rashid, Afzalur and Gow, Jeff (2020) Militarisation, energy consumption, CO2 emissions and economic growth in Myanmar. Defence and Peace Economics, 31 (6). pp. 615-641. ISSN 1024-2694

Al-lwayzy, Saddam H. and Yusaf, Talal and Saleh, Khalid and Yousif, Belal ORCID: https://orcid.org/0000-0003-3847-5469 (2019) The influence of emulsified water fuel containing fresh water microalgae on diesel engine performance, combustion, vibration and emission. Energies, 12 (13):2546. pp. 1-17.

Ghimire, Sujan and Deo, Ravinesh C. ORCID: https://orcid.org/0000-0002-2290-6749 and Raj, Nawin ORCID: https://orcid.org/0000-0002-8364-2644 and Mi, Jianchun (2019) Deep Learning Neural Networks Trained with MODIS Satellite-Derived Predictors for Long-Term Global Solar Radiation Prediction. Energies, 12 (12):2407. pp. 1-42.

Tao, Hai and Ebtehaj, Isa and Bonakdari, Hossein and Heddam, Salim and Voyant, Cyril and Al-Ansari, Nadhir and Deo, Ravinesh ORCID: https://orcid.org/0000-0002-2290-6749 and Yaseen, Zaheer Mundher (2019) Designing a new data intelligence model for global solar radiation prediction: application of multivariate modeling scheme. Energies, 12 (7):1365. pp. 1-24.

Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Lindstedt, R. Peter (2019) A mixture-fraction-based hybrid binomial Langevin-multiple mapping conditioning model. Proceedings of the Combustion Institute, 37 (2). pp. 2151-2158. ISSN 1540-7489

Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 (2019) A Physical Understanding of how Multiple Mapping Conditioning Works. In: 2019 Australian Combustion Symposium, 4–6 Dec, 2019, Adelaide, Australia.

Kafle, Sujit and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Al-Lwayzy, Saddam (2019) Effect of inlet manifold water injection on diesel engine performance and emissions. In: 2019 Australian Combustion Symposium, 4–6 Dec, 2019, Adelaide, Australia.

Al-Ogaili, Khaleel Saleem Jebur (2019) Optical and thermal optimisation of parabolic trough solar collectors for heating applications via a novel receiver tube. [Thesis (PhD/Research)]

Al-Manea, Ahmed and Buttsworth, David and Leis, John ORCID: https://orcid.org/0000-0001-5930-8139 and Saleh, Khalid (2019) Tunable Diode Laser Absorption Spectroscopy in a Supersonic Steam Jet. In: 9th Australian Conference on Laser Diagnostics (IX ACLD), 2-4 Dec, 2019, Adelaide, Australia.

Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 (2018) Identification of local extinction and prediction of reignition in a spark-ignited sparse spray flame using data mining. Combustion and Flame, 198. pp. 342-355. ISSN 0010-2180

Zhao, Mengmeng and Buttsworth, David and Choudhury, Rishabh (2018) Experimental and numerical study of OH* chemiluminescence in hydrogen diffusion flames. Combustion and Flame, 197. pp. 369-377. ISSN 0010-2180

Spence, Jennifer and Buttsworth, David and McCabe, Bernadette K. and Baillie, Craig and Antille, Diogenes L. and Carter, Brad ORCID: https://orcid.org/0000-0003-0035-8769 (2018) Investigation into thin layer drying rates and equilibrium moisture content of abattoir paunch waste. Renewable Energy, 124. pp. 95-102. ISSN 0960-1481

Ghimire, Sujan and Deo, Ravinesh C. ORCID: https://orcid.org/0000-0002-2290-6749 and Downs, Nathan J. ORCID: https://orcid.org/0000-0002-3191-6404 and Raj, Nawin ORCID: https://orcid.org/0000-0002-8364-2644 (2018) Self-adaptive differential evolutionary extreme learning machines for long-term solar radiation prediction with remotely-sensed MODIS satellite and Reanalysis atmospheric products in solar-rich cities. Remote Sensing of Environment, 212. pp. 176-198. ISSN 0034-4257

Al-Musaylh, Mohanad S. and Deo, Ravinesh C. ORCID: https://orcid.org/0000-0002-2290-6749 and Li, Yan ORCID: https://orcid.org/0000-0002-4694-4926 and Adamowski, Jan F. (2018) Two-phase particle swarm optimized-support vector regression hybrid model integrated with improved empirical mode decomposition with adaptive noise for multiple-horizon electricity demand forecasting. Applied Energy, 217. pp. 422-439. ISSN 0306-2619

Salcedo-Sanz, Sancho and Deo, Ravinesh C. ORCID: https://orcid.org/0000-0002-2290-6749 and Cornejo-Bueno, Laura and Camacho-Gomez, Carlos and Ghimire, Sujan (2018) An efficient neuro-evolutionary hybrid modelling mechanism for the estimation of daily global solar radiation in the Sunshine State of Australia. Applied Energy, 209. pp. 79-94. ISSN 0306-2619

Jahirul, M. I. and Brown, R. J. and Senadeera, W. (2018) Correlation between physiochemical properties and quality of biodiesel. In: Application of thermo-fluid processes in energy systems: key issues and recent developments for a sustainable future. Green Energy and Technology. Springer, Singapore, pp. 57-81. ISBN 978-981-10-0695-1

Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Lindstedt, R. Peter (2017) Mixture-fraction based hybrid binomial-langevin–MMC modelling applied to auto-ignition in vitiated flow. In: 11th Asia-Pacific Conference on Combustion, 10-14 Dec 2017, Sydney, Australia.

Alkaisi, Ahmed and Mossad, Ruth and Sharifian-Barforoush, Ahmad (2017) A review of the water desalination systems integrated with renewable energy. Energy Procedia, 110. pp. 268-274.

Tangalajuk Siang, Jeri and Sharifian, Ahmad (2017) Extending the capillary tube of a propane air-conditioner to reduce the refrigerant charge. Energy Procedia, 110. pp. 229-234.

Al-Faruk, Abdullah and Sharifian, Ahmad (2017) Flow field and performance study of vertical axis Savonius type SST wind turbine. Energy Procedia, 110. pp. 235-242.

de Silva, S. W. and Du, A. and Senadeera, W. and Gu, Y. (2017) Strained graphitic carbon nitride for hydrogen purification. Journal of Membrane Science, 528. pp. 201-205. ISSN 0376-7388

Rahimi, Hadi (2017) Investigation of radial flow ejector performance through experiments and computational simulations. [Thesis (PhD/Research)]

Tangalajuk Siang, Jeri and Sharifian, Ahmad (2017) Performance of a single-duct portable propane air conditioning system under different refrigerant charge levels. Heat Transfer - Asian Research, 46 (8). pp. 1246-1261. ISSN 1099-2871

Armstrong, Brent (2016) Towards 2020: an energy-neutral council works depot. [USQ Project]

Hairuddin, A. Aziz and Yusaf, Talal and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 (2016) Single-zone zero-dimensional model study for diesel-fuelled homogeneous charge compression ignition (HCCI) engines using Cantera. International Journal of Automotive and Mechanical Engineering, 13 (2). pp. 3309-3328. ISSN 2229-8649

Sitinamaluwa, Hansinee and Wang, Mingchao and Will, Geoffrey and Senadeera, Wijitha and Zhang, Shanqing and Yan, Cheng (2016) Structural transformations and mechanics of amorphous silicon anodes during initial lithian-delithiation cycle. In: Energy Future Conference 2016, 4-6 July 2016, Sydney, Australia.

Habibi, H. and Koma, A. Yousefi and Sharifian, A. (2016) Power and velocity control of wind turbines by adaptive fuzzy controller during full load operation. Iranian Journal of Fuzzy Systems, 13 (3). pp. 35-48. ISSN 1735-0654

Hashempour, Javad and Sharifian, Ahmad and Billingsley, John ORCID: https://orcid.org/0000-0002-7198-5594 (2016) Experimental measurement of direct thermal radiation through single-layer square-cell plain woven screens. Journal of Heat Transfer: Transactions of the ASME, 138 (1). 012701-1-012701-6. ISSN 0022-1481

Ariafar, Kavous and Buttsworth, David and Al-Doori, Ghassan and Sharifi, Navid (2016) Mixing layer effects on the entrainment ratio in steam ejectors through ideal gas computational simulations. Energy, 95. pp. 380-392. ISSN 0360-5442

Etminan, Amin and Harun, Zambri and Sharifian, Ahmad (2016) Numerical simulation of three dimensional turbulent flow structure and heat transfer in ribbed-straight, divergent and convergent ducts. International Journal of Mechanics, 10. pp. 362-367.

Ariafar, Kavous and Buttsworth, David and Al-Doori, Ghassan and Malpress, Ray (2015) Effect of mixing on the performance of wet steam ejectors. Energy, 93 (2). pp. 2030-2041. ISSN 0360-5442

Jahirul, M. I. and Brown, R. J. and Senadeera, W. and Ashwath, N. and Rasul, M. G. and Rahman, M. M. and Hossain, Farhad M. and Moghaddam, Lalehvash and Islam, M. A. and O'Hara, I. M. (2015) Physio-chemical assessment of beauty leaf (Calophyllum inophyllum)as second-generation biodiesel feedstock. Energy Reports, 1. pp. 204-215.

Baayens, Jocelyn and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 (2015) Identification of burning and extinguishing behaviour in spray flames with spark ignition. In: Australian Combustion Symposium 2015, 7-9 Dec 2015, University of Melbourne, Victoria.

Najafi, Gholamhassan and Ghobadian, Barat and Yusaf, Talal and Ardebili, Seyed Mohammad Safieddin and Mamat, Rizalman (2015) Optimization of performance and exhaust emission parameters of a SI (spark ignition) engine with gasoline-ethanol blended fuels using response surface methodology. Energy, 90 (2). pp. 1815-1829. ISSN 0360-5442

Bellars, Andrew (2015) Vehicle energy usage. [USQ Project]

Gharehghani, A. and Hosseini, R. and Mirsalim, M. and Yusaf, Talal F. (2015) A comparative study on the first and second law analysis and performance characteristics of a spark ignition engine using either natural gas or gasoline. Fuel, 158. pp. 488-493. ISSN 0016-2361

Gharehghani, Ayatallah and Hosseini, Reza and Mirsalim, Mostafa and Jazayeri, S. Ali and Yusaf, Talal (2015) An experimental study on reactivity controlled compression ignition engine fueled with biodiesel/natural gas. Energy, 89. pp. 558-567. ISSN 0360-5442

Al Kassir, Awf and Yusaf, Talal and Al Karany, Raul Kassir and Hamawand, Ihsan (2015) Determination of drying characteristics of biomass residues to be used as a renewable fuel. Journal of Biotechnology , 208 (Supplement). S15-S15. ISSN 0168-1656

Sitinamaluwa, Hansinee and Wang, Mingchao and Will, Geoffrey and Senadeera, Wijitha and Ling, Ming and Zhang, Shanqing and Yan, Cheng (2015) Numerical investigation on structural evolution and mechanical behaviour of amorphous silicon Li ion battery anodes. In: 9th International Mesostructured Materials Symposium (IMMS-9), 17-20 Aug 2015, Brisbane, Australia.

Arashnia, Ilva and Najafi, Gholamhassan and Ghobadian, Barat and Yusaf, Talal and Mamat, Rizalman and Kettner, Maurice (2015) Development of micro-scale biomass-fuelled CHP system using stirling engine. Energy Procedia , 75. pp. 1108-1113.

Yasin, Mohd Hafizil Mat and Mamat, Rizalman and Yusop, Ahmad Fitri and Paruka, Perowansa and Yusaf, Talal and Najafi, Gholamhassan (2015) Effects of exhaust gas recirculation (EGR) on a diesel engine fuelled with palm-biodiesel. Energy Procedia , 75. pp. 30-36.

Gharehghani, A. and Hosseini, R. and Mirsalim, M. and Yusaf, Talal F. (2015) A computational study of operating range extension in a natural gas SI engine with the use of hydrogen. International Journal of Hydrogen Energy, 40 (17). pp. 5966-5975. ISSN 0360-3199

Hamawand, Ihsan (2015) Anaerobic digestion process and bio-energy in meat industry: a review and a potential. Renewable and Sustainable Energy Reviews, 44. pp. 37-51. ISSN 1364-0321

Al-Juboori, Raed A. and Yusaf, Talal and Bowtell, Leslie ORCID: https://orcid.org/0000-0001-6694-7609 and Aravinthan, Vasantha (2015) Energy characterisation of ultrasonic systems for industrial processes. Ultrasonics, 57. pp. 18-30. ISSN 0041-624X

Noor, Muhamad Mat (2015) Experimental and numerical study of MILD combustion in an open-end furnace with exhaust gas recirculation using methane and biogas. [Thesis (PhD/Research)]

Al-Atresh, Safia R. (2015) Inducing swirl flow within stationary cylindrical split channel. [Thesis (PhD/Research)]

Maity, Jyoti Prakash and Hou, Chia-Peng and Majumder, Dip and Bundschuh, Jochen and Kulp, Thomas R. and Chen, Chien-Yen and Chuang, Lu-Te and Nathan Chen, Ching-Nen and Jean, Jiin-Shuh and Yang, Tsui-Chu and Chen, Chien-Cheng (2014) The production of biofuel and bioelectricity associated with wastewater treatment by green algae. Energy, 78. pp. 94-103. ISSN 0360-5442

Al-Faruk, A. and Sharifian, A. (2014) Influence of blade overlap and blade angle on the aerodynamic coefficients in vertical axis swirling type Savonius wind turbine. In: 19th Australasian Fluid Mechanics Conference (AFMC 2014), 8-11 Dec 2014, Melbourne, Australia.

Hairuddin, A. A. and Wandel, A. P. ORCID: https://orcid.org/0000-0002-7677-7129 and Yusaf, T. (2014) An introduction to a homogeneous charge compression ignition engine. Journal of Mechanical Engineering and Sciences, 7. pp. 1042-1052. ISSN 2289-4659

Camilleri, Heath A. (2014) Investigation of energy storage media to improve network voltage regulation. [USQ Project]

Taylor, Patrick (2014) Supercritical carbon dioxide geothermal energy system analysis. [USQ Project]

Chen, Guangnan ORCID: https://orcid.org/0000-0001-8460-9224 and Sandell, Gary and Baillie, Craig (2014) Alternative energy sources for cotton production in Australia. In: 18th World Congress of the International Commission of Agriculture and Biosystems Engineering (CIGR 2014): Upgrading the Quality of our Life, 16-19 Sep 2014, Beijing, China.

Yusaf, Talal and Hamawand, Ihsan and Schmidt, Erik and Binnie, James and Rees, Steven and Chakrabarty, Sayan (2014) Coals seam gas (CSG) in agriculture - a review: technical and market analysis for Australia. Sustainable Energy Technologies and Assessments, 8. pp. 149-158. ISSN 2213-1388

Jahirul, Mohammad I. and Koh, Wenyong and Brown, Richard J. and Senadeera, Wijitha and O'Hara, Ian and Moghaddam, Lalehvash (2014) Biodiesel production from non-edible beauty leaf (Calophyllum inophyllum) oil: process pptimization using response surface methodology (RSM). Energies, 7 (8). pp. 5317-5331.

Noor, M. M. and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Yusaf, Talal (2014) Air fuel ratio study for mixture of biogas and hydrogen on mild combustion. International Journal of Automotive and Mechanical Engineering, 10 (1). pp. 2144-2154. ISSN 2229-8649

Noor, M. M. and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Yusaf, Talal (2014) Effect of air-fuel ratio on temperature distribution and pollutants for biogas MILD combustion. International Journal of Automotive and Mechanical Engineering, 10 (1). pp. 1980-1992. ISSN 2229-8649

Noor, M. M. and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Yusaf, Talal (2014) The simulation of biogas combustion in a MILD burner. Journal of Mechanical Engineering and Sciences, 6 (1). pp. 995-1013. ISSN 2289-4659

Ong, Hwai Chyuan and Masjuki, H. H. and Mahlia, T. M. I. and Silitonga, A. S. and Chong, W. T. and Yusaf, Talal (2014) Engine performance and emissions using Jatropha curcas, Ceiba pentandra and Calophyllum inophyllum biodiesel in a CI diesel engine. Energy, 69. pp. 427-445. ISSN 0360-5442

Azad, Abul Kalam and Rasul, Mohammad Golam and Yusaf, Talal (2014) Statistical diagnosis of the best weibull methods for wind power assessment for agricultural applications. Energies, 7 (5). pp. 3056-3085.

Ho, Thinh X. (2014) A three-dimensional model for transient performance of a solid oxide fuel cell. International Journal of Hydrogen Energy, 39 (12). pp. 6680-6688. ISSN 0360-3199

Mat Yasin, M. H. and Yusaf, Talal and Mamat, R. and Yusop, A. Fitri (2014) Characterization of a diesel engine operating with a small proportion of methanol as a fuel additive in biodiesel blend. Applied Energy, 114. pp. 865-873. ISSN 0306-2619

Shadidi, Behdad and Yusaf, Talal and Alizadeh, Hossein Haji Agha and Ghobadian, Barat (2014) Experimental investigation of the tractor engine performance using diesohol fuel. Applied Energy, 114. pp. 874-879. ISSN 0306-2619

Shahiduzzaman, MD and Alam, Khorshed ORCID: https://orcid.org/0000-0003-2232-0745 (2014) Interfuel substitution in Australia: a way forward to achieve environmental sustainability. The Australian Journal of Agricultural and Resource Economics, 58 (1). pp. 22-42. ISSN 1364-985X

Jahirul, M. I. and Senadeera, W. and Brown, R. J. and Moghaddam, L. (2014) Estimation of biodiesel properties from chemical composition – an artificial neural network (ANN) approach. International Scientific Journal of Environmental Science, 3 (3). pp. 1-7.

Hairuddin, Abdul Aziz (2014) Implementation of conditional moment closure in a zero-dimensional model for HCCI engines and comparison with experiment. [Thesis (PhD/Research)]

Jahirul, M. L. and Senadeera, W. and Brooks, P. and Brown, R. J. and Situ, R. and Pham, P. X. and Masri, A. R. (2013) An artificial neutral network (ANN) model for predicting biodiesel kinetic viscosity as a function of temperature and chemical compositions. In: 20th International Congress on Modelling and Simulation (MODSIM 2013): Adapting to Change: The Multiple Roles of Modelling , 1-6 Dec 2013, Adelaide, Australia.

Noor, M. M. and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Yusaf, Talal (2013) Design and development of mild combustion burner. Journal of Mechanical Engineering and Sciences, 5. pp. 662-676. ISSN 2289-4659

Gharehghani, A. and Hosseini, R. and Yusaf, T. (2013) Investigation of the effect of additives to natural gas on heavy-duty SI engine combustion characteristics. Journal of Mechanical Engineering and Sciences, 5. pp. 677-687. ISSN 2289-4659

Noor, M. M. and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Yusaf, Talal (2013) Numerical study of oxygen dilution and temperature distribution of biogas combustion in Bluff-body MILD burner. In: 7th Australian Combustion Symposium (ACS 2013), 6-8 Nov 2013, Perth, Australia.

Burton-Ree, Nicholas (2013) Hydroelectric generators for third world countries. [USQ Project]

Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 (2013) Mixture fraction probability density functions in sparse spray flames with spark ignition. In: 7th Australian Combustion Symposium (ACS 2013), 6-8 Nov 2013, Perth, Australia.

Yusaf, Talal (2013) Experimental study of microorganism disruption using shear stress. Biochemical Engineering Journal, 79. pp. 7-14. ISSN 1369-703X

Helwig, Andreas and Ahfock, Tony (2013) Extending SWER line capacity. In: 23rd Australasian Universities Power Engineering Conference (AUPEC 2013), 29 Sep–3 Oct 2013, Hobart, Australia.

Szabo, Phillip (2013) Development of a pump efficiency monitor for use in cotton irrigation. [USQ Project]

Tangalajuk Siang, Jeri and Sharifian, Ahmad (2013) Reducing the mass of the refrigerant in the capillary tube of a propane air-conditioner. In: 14th Asian Congress of Fluid Mechanics (14 ACFM), 15-19 Oct 2013, Hanoi, Vietnam.

Sutcliffe, John William (2013) Urban wind turbine characterization system. [USQ Project]

AL-Khaffajy, Marwaan and Mossad, Ruth (2013) Optimization of the heat exchanger in a flat plate indirect heating integrated collector storage solar water heating system. Renewable Energy, 57. pp. 413-421. ISSN 0960-1481

Hairuddin, A. Aziz and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Yusaf, Talal (2013) A homogeneous charge compression ignition engine: an introduction. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2013) Development of artificial neural network model in predicting performance of the smart wind turbine blade. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Noor, M. M. and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Yusaf, Talal (2013) The air fuel ratio study for the mixture of biogas and hydrogen on mild combustion. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2013) Smart structure for small wind turbine blade. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Noor, M. M. and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Yusaf, Talal (2013) Analysis of recirculation zone and ignition position of non-premixed bluff-body for biogas mild combustion. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1176-1186. ISSN 2229-8649

Yusaf, T. and Baker, P. and Hamawand, I. and Noor, M. M. (2013) Effect of compressed natural gas mixing on the engine performance and emissions. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1416-1429. ISSN 2229-8649

Noor, M. M. and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Yusaf, Talal (2013) Detail guide for CFD on the simulation of biogas combustion in bluff-body mild burner. In: 2nd International Conference of Mechanical Engineering Research (ICMER 2013): Green Technology for Sustainable Environment, 1-3 Jul 2013, Pahang, Malaysia.

Yusaf, Talal and Noor, M. M. and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 (2013) Mild combustion: the future for lean and clean combustion. In: 2nd International Conference of Mechanical Engineering Research (ICMER 2013): Green Technology for Sustainable Environment, 1-3 Jul 2013, Pahang, Malaysia.

Noor, M. M. and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Yusaf, Talal (2013) The development of MILD combustion open burner experimental setup. In: 2nd International Conference of Mechanical Engineering Research (ICMER 2013): Green Technology for Sustainable Environment, 1-3 Jul 2013, Pahang, Malaysia.

Yusaf, T. and Hamawand, I. and Baker, P. and Najafi, G. (2013) The effect of methanol-diesel blended ratio on CI engine performance. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1385-1395. ISSN 2229-8649

Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 (2013) Extinction predictors in turbulent sprays. Proceedings of the Combustion Institute, 34 (1). pp. 1625-1632. ISSN 1540-7489

Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Lindstedt, R. Peter (2013) Hybrid multiple mapping conditioning modeling of local extinction. Proceedings of the Combustion Institute, 34 (1). pp. 1365-1372. ISSN 1540-7489

Mossad, Ruth and AL-Khaffajy, Marwaan (2013) Investigating two configurations of a heat exchanger in an indirect heating integrated collector storage solar water heating system. Journal of Energy and Power Engineering, 7 (1). pp. 66-73. ISSN 1934-8975

Jahirul, M. I. and Brown, J. R. and Senadeera, W. and Aswath, N. and Laing, C. and Leski-Taylor, J. and Rasul, M. G. (2013) Optimisation of bio-oil extraction process from Beauty Leaf (Calophyllum inophyllum) oil seed as a second generation biodiesel source. Procedia Engineering, 56. pp. 619-624.

Jahirul, Mohammed I. and Brown, Richard J. and Senadeera, Wijitha and O'Hara, Ian M. and Ristovski, Zoran D. (2013) The use of artificial neural networks for identifying sustainable biodiesel feedstocks. Energies, 6 (8). pp. 3764-3806.

Karimkashi, Shervin and Kermani, Mohammad J. and Sharifian, Ahmad and Hashempour, Javad (2012) Numerical computation of pressure drop across an off supplementary firing burner in heat recovery steam generator. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Al-Faruk, A. and Sharifian, S. A. and Al-Atresh, S. (2012) Numerical investigation of performance of a new type of savonius turbine. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Al-Atresh, R. S. and Sharifian, S. A. and Al-Faruk, A. (2012) The effect of inlet velocity and temperature on the strength of the swirling induced by a split channel: a CFD approach. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Al-Faruk, Abdullah and Sharifian, Ahmad (2012) Angular velocity of a combined unloaded Savonius turbine with a vortex inducing chamber: a CFD approach. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Supeni, Eris Elianddy (2012) Design and analysis of a smart composite beam for small wind turbine blade construction. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Tangalajuk Siang, Jeri and Sharifian, Ahmad (2012) Reducing the amount of required propane refrigerant in the condenser of a commercial air-conditioner by increasing the inlet temperature. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Noor, M. M. and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Yusaf, T. F. (2012) The study of air fuel ratio for open furnace MILD combustion of biogas on bluff-body burner. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Noor, M. M. and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Yusaf, T. F. (2012) A preliminary study of control parameters for open furnace mild combustion using CFD. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Noor, M. M. and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Yusaf, T. F. (2012) Mild combustion: a technical review towards open furnace combustion. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Noor, M. M. and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Yusaf, T. F. (2012) The modelling of the effect of air fuel ratio on unburned hydrocarbons for MILD combustion. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2012) Design of smart structures for wind turbine blades. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Widodo, Agung Sugeng (2012) Temperature variations in a free piston compression wind tunnel. [Thesis (PhD/Research)]

Mossad, R. and AL-Khaffajy, M. (2012) Investigating two configurations of a heat exchanger in an Indirect Heating Integrated Collector Storage Solar Water Heating System (IHICSSWHS). In: International Conference on Renewable Energies and Power Quality (ICREPQ12), 28-30 March 2012, Santiago de Compostela, Spain.

Al-Juboori, Raed A. and Yusaf, Talal and Aravinthan, Vasanthadevi (2012) Investigating the efficiency of thermosonication for controlling biofouling in batch membrane systems. Desalination, 286. pp. 349-357. ISSN 0011-9164

Al-lwayzy, Saddam H. and Yusaf, Talal and Jensen, Troy (2012) Evaluating tractor performance and exhaust gas emissions using biodiesel from cotton seed oil. IOP Conference Series: Materials Science and Engineering, 36 (1). pp. 442-452. ISSN 1757-8981

Al-Juboori, R. A. and Yusaf, T. F. (2012) Improving the performance of ultrasonic horn reactor for deactivating microorganisms in water. IOP Conference Series: Materials Science and Engineering, 36 (1). pp. 1-12. ISSN 1757-8981

AL-Khaffajy, Marwaan Awad Hamad (2012) Numerical evaluation of the performance of an indirect heating integrated collector storage solar water heating system. [Thesis (PhD/Research)]

Spence, Jennifer E. (2012) Renewable energy in the Australian red meat processing industry & the viability of paunch as a biofuel. [Thesis (PhD/Research)]

Amirruddin, A. K. and Noor, M. M. and Kadirgama, K. and Sharma, K. V. (2012) The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP). In: 3rd International Conference on Management of Natural Resources, Sustainable Development and Ecological Hazards: Ravage of the Planet III (RAV 2011) , 13-15 Dec 2011, Selangor, Malaysia.

Al-juboori, Raed Ahmed (2012) Ultrasound technology as a pre-treatment for biofouling control in reverse osmosis (RO) system. [Thesis (PhD/Research)]

Rao, G. Srinivasa and Sharma, K. V. and Chary, S. P. and Bakar, R. A. and Rahman, M. M. and Kadirgama, K. and Noor, M. M. (2011) Experimental study on heat transfer coefficient and friction factor of Al2O3 nanofluid in a packed bed column. Journal of Mechanical Engineering and Sciences, 1 (1). pp. 1-15.

Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 (2011) A stochastic micromixing model based on the turbulent diffusion length scale. In: 11th Australian Combustion Symposium (ACS 2011), 29 Nov-1 Dec 2011, Newcastle, Australia.

Noor, M. M. and Amiruddin, A. K. and Kadirgama, K. and Sharma, K. V. (2011) The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP). In: 3rd International Conference on Energy and Sustainability , 11-13 Apr 2011, Alicante, Spain.

Turnbull, Jon (2011) Improving the performance of the Nanango wastewater treatment plant. [USQ Project]

Goh, Steven and Craig, Ian and Muller, Zach (2011) Solar thermal energy alternatives and their application to water heating and air cooling in the meat processing industry. In: SSEE 2011: Escaping Silos, 24–26 Oct 2011, Brisbane, Australia.

Searle, Joshua (2011) The efficient use of building mechanical services for saving energy. [USQ Project]

Burgess, R. and Ahfock, A. (2011) The use of voltage regulators in power systems with arc-suppression coils. In: AUPEC 2011: Integrating Renewables into the Grid, 25-28 Sep 2011, Brisbane, Australia.

Bruce, Thomas (2011) Investigation of cost and performance characteristic of photovoltaic panels. [USQ Project]

Yusaf, T. F. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Elawad, M. M. (2011) Crude palm oil fuel for diesel-engines: experimental and ANN simulation approaches. Energy, 36 (8). pp. 4871-4878. ISSN 0360-5442

Yusaf, T. and Saleh, K. H. and Said, M. A. (2011) Engine performance and emission analysis of LPG-SI engine with the aid of artificial neural network. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 225 (5). pp. 591-600. ISSN 0957-6509

Burgess, R. and Ahfock, A. (2011) Minimising the risk of cross-country faults in systems using arc suppression coils. IET Generation, Transmission and Distribution, 5 (7). pp. 703-711. ISSN 1751-8687

Yusaf, Talal and Goh, Steven and Borserio, J. A. (2011) Potential of renewable energy alternatives in Australia. Renewable and Sustainable Energy Reviews, 15 (5). pp. 2214-2221. ISSN 1364-0321

Bangerter, Philip (2011) The latest on the thorium cycle as a sustainable energy source. In: 2011 Doctors and Scientists for Sustainability and Social Justice Meeting (D3SJ 2011) , 4 May 2011, Brisbane, Australia.

Burgess, Robert Thomas (2011) Improving high voltage power system performance using arc suppression coils. [Thesis (PhD/Research)]

Clarke, Jason and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Mastorakos, E. (2010) Analysis of data to develop models for spray combustion. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Bowtell, L. A. ORCID: https://orcid.org/0000-0001-6694-7609 and Ahfock, A. L. (2010) Dynamic analysis of a DC offset controller for grid-connected inverters. In: AUPEC 2010: Power Quality for the 21st Century, 5-8 Dec 2010, Christchurch, New Zealand.

Kamel, Fouad (2010) Life-time cost-benefit analysis of solar energy systems in Queensland. In: 48th Annual Conference of the Australian Solar Energy Society: Bringing Business and Research Together for a Better Tomorrow (Solar2010), 1-3 Dec 2010, Canberra, ACT, Australia.

Clarke, Jason (2010) Analysis of data to develop models for spray combustion. [USQ Project]

Di Bella, Robert Michael (2010) Biogas generation from an anaerobic pond 'abattoir'. [USQ Project]

Perry, Ramon (2010) Design of a small wind turbine for a rural community in Australia. [USQ Project]

Grygorcewicz, Jon-Paul Frederick (2010) Improvement of hydrocarbon dew point determination via gas chromatography. [USQ Project]

Baker, Stuart (2010) Induced draft (ID) fan lubrication system design review and proposed modification upgrade at Callide C Power Station. [USQ Project]

Muller, Zach Anthony (2010) Investigation of solar thermal energy alternatives and their applications to water heating and air cooling in the meat processing industry. [USQ Project]

Kirkland, Rhys (2010) The development of a small scale gas turbine to assist in the analysis of coal seam gas as an alternative stationary jet fuel for Australia. [USQ Project]

Said, Mior A. and Buttsworth, D. R. and Yusaf, T. F. (2009) A review of radiation heat transfer measurement for diesel engines using the two-colour method. In: 3rd International Conference on Energy and Environment (ICEE 2009): Advancement Towards Global Sustainability , 7-8 Dec 2009, Malacca, Malaysia.

Widodo, A. and Buttsworth, D. R. (2009) Deduction of temperature fluctuations in transient compression wind tunnels using incompressible turbulent flow data. In: 3rd International Conference on Energy and Environment (ICEE 2009): Advancement Towards Global Sustainability, 7-8 Dec 2009, Malacca, Malaysia.

Buttsworth, David and Saleh, Khalid and Yusaf, Talal (2009) Discrete particle simulation for the initial stages of ice accretion in aircraft engines: initial model development. In: 3rd International Conference on Energy and Environment (ICEE 2009): Advancement Towards Global Sustainability, 7-8 Dec 2009, Malacca, Malaysia.

Agrira, Abdalla and Buttsworth, David R. and Yusaf, Talal (2009) Instantaneous heat flux simulation of S.I. engines: comparison of unsteady thermal boundary layer modelling with experimental data. In: 3rd International Conference on Energy and Environment (ICEE 2009): Advancement Towards Global Sustainability , 7-8 Dec 2009, Malacca, Malaysia.

Najafi, G. and Yusaf, T. F. and Ghobadian, B. and Najmeddin, V. R. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2009) Performance and exhaust emission of a SI engine fuelled with potato waste ethanol and its blends with gasoline. International Energy Journal, 10 (4). pp. 215-226. ISSN 1513-718X

Grimm, Justin John (2009) Electromagnetic linear actuator - design, manufacture and control. [USQ Project]

Helwig, Andreas and Ahfock, Tony L. (2009) Ultra-capacitor assisted battery storage for remote area power supplies: a case study. In: AUPEC 2009: Sustainable Energy Technologies and Systems, 27-30 Sep 2009, Adelaide, Australia.

Sharma, R. and Ball, J. A. R. (2009) Unipolar stitched inverter low-frequency harmonics caused by stitching delay. IET Power Electronics, 2 (5). pp. 508-516. ISSN 1755-4535

Najafi, G. and Ghobadian, B. and Tavakoli, T. and Buttsworth, D. R. and Yusaf, T. F. and Faizollahnejad, M. (2009) Performance and exhaust emissions of a gasoline engine with ethanol blended gasoline fuels using artificial neural network. Applied Energy, 86 (5). pp. 630-639. ISSN 0306-2619

Ghobadian, B. and Rahimi, H. and Nikbakht, A. M. and Najafi, G. and Yusaf, T. F. (2009) Diesel engine performance and exhaust emission analysis using waste cooking biodiesel fuel with an artificial neural network. Renewable Energy, 34 (4). pp. 976-982. ISSN 0960-1481

Rahimi, Hadi and Ghobadian, Barat and Yusaf, Talal and Najafi, Gholamhasan and Khatamifar, Mahdi (2009) Diesterol: an environment-friendly IC engine fuel. Renewable Energy, 34 (1). pp. 335-342. ISSN 0960-1481

Najafi, Gholamhassan and Yusaf, Talal (2009) Experimental investigation of using methanol-diesel blended fuels in diesel engine. In: 4th International Conference on Thermal Engineering Theory and Applications, 12-14 Jan 2009, Abu Dhabi, UAE.

Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Lindstedt, R. Peter (2009) Application of hybrid binomial Langevin-multiple mapping conditioning method to reacting jet flow. In: Australian Combustion Symposium (ACS 2009), 2-4 Dec 2009, Brisbane, Australia.

Schroll, Peter and Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Cant, R. Stewart and Mastorakos, E. (2009) Direct numerical simulations of autoignition in turbulent two-phase flows. Proceedings of the Combustion Institute, 32 (2). pp. 2275-2282. ISSN 1540-7489

Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Chakraborty, Nilanjan and Mastorakos, E. (2009) Direct numerical simulations of turbulent flame expansion in fine sprays. Proceedings of the Combustion Institute, 32 (2). pp. 2283-2290. ISSN 1540-7489

Sharifian, Ahmad and Buttsworth, David R. (2009) Direct radiation from wildfires through square woven screens. In: ASME 2008 Summer Heat Transfer Conference (HT 2008), 10-14 Aug 2008, Jacksonville, FL. United States.

Wandel, Andrew P. ORCID: https://orcid.org/0000-0002-7677-7129 and Lindstedt, R. Peter (2009) Hybrid binomial Langevin-multiple mapping conditioning modeling of a reacting mixing layer. Physics of Fluids, 21 (1). 015103-015116. ISSN 1070-6631

Kamel, Fouad (2009) Potential contribution of solar energy towards electrical peak demands in South-East Queensland. In: SSEE 2009: Solutions for a Sustainable Planet , 22-24 Nov 2009, Melbourne, Australia .

Lear, Foster Robert (2008) Hoist system for small boat stacker. [USQ Project]

Strong, Simon James (2008) Design of a small wind turbine. [USQ Project]

Bowtell, Les ORCID: https://orcid.org/0000-0001-6694-7609 and Ahfock, Tony (2007) Comparison between unipolar and bipolar single phase grid-connected inverters for PV applications. In: AUPEC 2007: 17th Australasian Universities Power Engineering Conference, 9-12 Dec 2007, Perth, Australia.

Kleynhans, Claudius Justus (2007) Design and review of Millmerran coal handling plant. [USQ Project]

Grassick, Bruce (2006) Design and construction of a solar collector for teaching purposes. [USQ Project]

Gribble, Brett (2006) Stress relieving furnace modelling and analysis. [USQ Project]

Hamid, H. A. and Yusaf, T. and Yusof, Z. M. (2006) An investigation on the improvement of the operation of Tenom Pangi HPP cooling power system. In: International Conference on Energy and Environment 2006 (ICEE 2006), 28-30 Aug 2006, Kajang, Malaysia.

Abdalla, Fouad Kamel (2005) Modelling and assessment of an experimental combined evacuated-tubes-direct-flat-plate solar heater. In: 43rd Annual Conference of the Australian and New Zealand Solar Energy Society (Solar05), 28-30 Nov 2005, Dunedin, New Zealand.

Dyke, Geoffrey Wayne (2005) Optimising condenser air extraction to reduce greenhouse gas emissions at the Loy Yang B power station. [USQ Project]

Abdullah, Shahrir and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Sopian, Kamaruzzaman (2005) Design consideration of low temperature differential double-acting Stirling engine for solar application. Renewable Energy, 30 (1). pp. 1923-1941. ISSN 0960-1481

Eagle, Michael Allan (2005) Numerical investigation of the thermal efficiency of glass refrigeration doors. [USQ Project]

Sharma, Ronald (2005) Removal of DC offset current from transformerless PV inverters connected to utility. In: 40th International Universities Power Engineering Conference (UPEC 2005), 7-9 Sept 2005, Cork, Ireland.

Deo, R. C. ORCID: https://orcid.org/0000-0002-2290-6749 and Mi, J. and Nathan, G. J. (2004) An investigation of the influence of nozzle aspect ratio on the velocity field of turbulent plane jet. In: 15th Australasian Fluid Mechanics Conference (AFMC 2004), 13-17 Dec 2004, Sydney, Australia.

Goodger, Anthony Maldon (2004) The formation of nitrogen oxides in a pulverised coal boiler. [USQ Project]

Xiang, Wei and Fok, Sai Cheong and Thimm, Georg (2004) Agent-based composable simulation for virtual prototyping of fluid power system. Computers in Industry, 54 (3). pp. 237-251. ISSN 0166-3615

Epaarachchi, Jayantha A. and Clausen, Philip D. (2004) Accelerated full scale fatigue testing of a small composite wind turbine blade using a mechanically operated test rig. In: 2004 Structural Integrity and Fracture International Conference (SIF2004), 26-29 Sept 2004, Brisbane, Australia.

Ali, Md Nawsher and Islam, Md Mainul and Ferdous, Chy. Md Refaul (2004) Investigation for a suitable screw of a briquetting machine. In: 2nd BSME-ASME lnternational Conference on Thermal Engineering, 2-4 Jan 2004, Dhaka, Bangladesh.

Kamel, Fouad (2003) Cost per kWh produced and payback time of a PV -solar -thermal -combined roof top collector at different locations in New Zealand. In: 41st Annual Conference of the Australian and New Zealand Solar Energy Society (Solar03), 25 Nov - 2 Dec 2003, Melbourne, Australia.

Islam, Md Mainul and Khan, Kamrujjaman and Ali, Md Nawsher and Islam, Md Shahidul (2003) An investigation on the raw materials and products of the briquetting machine. In: 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003), 19-20 Dec 2003 , Khulna, Bangladesh.

Ferdous, C. M. R. and Islam, M. Shahidul and Islam, M. Mainul and Alam, M. M. Asraful and Rahman, A. N. M.Mizanur (2003) Solar photovoltaic technology and Bangladesh. In: 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003), 19-20 Dec 2003, Khulna, Bangladesh.

Kamel, Fouad (2002) Optimum operating temperature for evacuated tube solar collectors. In: 40th Annual Conference of the Australian and New Zealand Solar Energy Society (Solar02): Solar Harvest, 25 Nov - 2 Dec 2002, Newcastle, Australia.

Kamel, Fouad and Wilson, Paul (2002) Cost of kWh produced and payback time of a pv-solar-thermal-combined rooftop collector at different locations in New Zealand. In: EEA Annual Conference & Trade Exhibition 2002: Meeting the Challenges of Growth, 21-22 June 2002, Christchurch, New Zealand.

Kamel, Fouad and Wilson, Paul (2001) Assessment of domestic evacuated tube direct solar water heater. In: 2001 Solar World Congress (ISES 2001), 25 Nov – 2 Dec 2001, Adelaide, Australia.

Kamel, Fouad (1989) A design factor for photovoltaic power stations. In: 9th European Communities Photovoltaic Solar Energy Conference, 25-29 Sept 1989, Freiburg, Germany.

Mossad, R. Data on the construction of a mathmatical model to test the optimisation of the air gap spacing in a solar water heater with double glass cover ANSYS 13.0-Fluent software files. [Collection Record (Dataset)].