Browse by Fields of Research (ANZSRC 2020)

Lokuge, Weena ORCID: https://orcid.org/0000-0003-1370-1976 and Otoom, Omar and Borzou, Rahmin and Navaratnam, Satheeskumar and Herath, Nilupa and Thambiratnam, David (2021) Experimental and numerical analysis on the effectiveness of GFRP wrapping system on timber pile rehabilitation. Case Studies in Construction Materials, 15:e00552.

Otoom, Omar F. and Lokuge, Weena ORCID: https://orcid.org/0000-0003-1370-1976 and Karunasena, Warna and Manalo, Allan C. and Ozbakkaloglu, Togay and Thambiratnam, David (2021) Experimental and numerical evaluation of the compression behaviour of GFRP-wrapped infill materials. Case Studies in Construction Materials, 15:e00654.

Alhawamdeh, Mohammad and Alajarmeh, Omar and Aravinthan, Thiru and Shelley, Tristan ORCID: https://orcid.org/0000-0002-4812-0285 and Schubel, Peter and Mohammad, Ali and Zeng, Xuesen (2021) Modelling flexural performance of hollow pultruded FRP profiles. Composite Structures, 276:114553. ISSN 0263-8223

Duo, Yongyu and Liu, Xiaogang and Liu, Yue and Tafsirojjaman, T. ORCID: https://orcid.org/0000-0002-4801-6744 and Sabbrojjaman, Md (2021) Environmental impact on the durability of FRP reinforcing bars. Journal of Building Engineering, 43:102909. pp. 1-20. ISSN 2352-7102

Emmanuel, K. D. C. and Herath, H. M. C. M. ORCID: https://orcid.org/0000-0002-6796-0802 and Jeewantha, L. H .J. ORCID: https://orcid.org/0000-0002-0244-6159 and Epaarachchi, J. A. and Aravinthan, T. (2021) Thermomechanical and fire performance of DGEBA based shape memory polymer composites for constructions. Construction and Building Materials, 303:124442. ISSN 0950-0618

Alajmi, Ayedh Eid and Alotaibi, Jasem Gh. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Nirmal, Umar (2021) Tribological studies of bamboo fibre reinforced epoxy composites using a BOD technique. Polymers, 13:2444.

Herath, Madhubhashitha ORCID: https://orcid.org/0000-0002-6796-0802 and Epaarachchi, Jayantha (2021) Shape memory polymer composites and their smart structural applications. In: Composite materials: manufacturing, properties and applications. Elsevier, Amsterdam, Netherlands, pp. 581-610. ISBN 978-0-12-820512-9

Srinivasamurthy, Lakshmikanth and Chevali, Venkata S. ORCID: https://orcid.org/0000-0002-5648-0344 and Zhang, Zuhua and Wang, Hao (2021) Phase changes under efflorescence in alkali activated materials with mixed activators. Construction and Building Materials, 283:122678. pp. 1-13.

Manalo, Allan and Maranan, Ginghis and Benmokrane, Brahim and Cousin, Patrice and Alajarmeh, Omar and Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Liang, Ray and Hota, Gangarao (2021) Comparative durability of GFRP composite reinforcing bars in concrete and in simulated concrete environments. Cement and Concrete Composites, 109:103564. pp. 1-14. ISSN 0958-9465

Alhawamdeh, Mohammad and Alajarmeh, Omar and Aravinthan, Thiru and Shelley, Tristan ORCID: https://orcid.org/0000-0002-4812-0285 and Schubel, Peter and Kemp, Michael and Zeng, Xuesen (2021) Modelling hollow pultruded FRP profiles under axial compression: Local buckling and progressive failure. Composite Structures, 262:113650. pp. 1-14. ISSN 0263-8223

Gunasekara, Chamila and Atzarakis, Peter and Lokuge, Weena ORCID: https://orcid.org/0000-0003-1370-1976 and Law, David W. and Setunge, Sujeeva (2021) Novel analytical method for mix design and performance prediction of high calcium fly ash geopolymer concrete. Polymers, 13 (6):900.

Huo, Siqi and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Yu, Bin and Ran, Shiya and Chevali, Venkata ORCID: https://orcid.org/0000-0002-5648-0344 and Liu, Lei and Fang, Zhengping and Wang, Hao (2021) Phosphorus-containing flame retardant epoxy thermosets: Recent advances and future perspectives. Progress in Polymer Science, 114:101366. pp. 1-36. ISSN 0079-6700

Zangana, Sartip and Epaarachchi, Jayantha and Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Leng, Jinsong and Schubel, Peter (2021) Behaviour of continuous fibre composite sandwich core under low-velocity impact. Thin-Walled Structures, 158:107157. pp. 1-11. ISSN 0263-8231

Li, Lujuan (2021) Structural composition and mechanical performances of poly (vinyl alcohol) materials: experimental and molecular dynamics simulation studies. [Thesis (PhD/Research)]

Abasi, Ali and Hassanli, Reza and Vincent, Thomas and Manalo, Allan (2020) Influence of prism geometry on the compressive strength of concrete masonry. Construction and Building Materials, 264:120182. pp. 1-17. ISSN 0950-0618

Tafsirojjaman, T. ORCID: https://orcid.org/0000-0002-4801-6744 and Fawzia, Sabrina and Thambiratnam, David (2020) Investigation on the behaviour of CFRP strengthened CHS members under monotonic loading through finite element modelling. Structures, 28. pp. 297-308.

Manalo, A.C. and Alajarmeh, O. and Cooper, D. and Sorbello, C. D. and Weerakoon, S. Z. and Benmokrane, B. (2020) Manufacturing and structural performance of glass-fiber-reinforced precast-concrete boat ramp planks. Structures, 28. pp. 37-56. ISSN 2352-0124

Moudood, Abdul and Rahman, Anisur and Huq, Nayeem Md Lutful and Ochsner, Andreas and Islam, Md Mainul and Francucci, Gaston (2020) Mechanical properties of flax fiber‐reinforced composites at different relative humidities: Experimental, geometric, and displacement potential function approaches. Polymer Composites, 41 (12). pp. 4963-4973. ISSN 0272-8397

Li, Jiajun and Zhang, Ping and Chen, Lin and Li, Gaoming and Chen, Hao and Jia, Chunhui and Wu, Yeping and Chen, Mao and Zhao, Xiuli and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X (2020) Strong, tough and healable elastomer nanocomposites enabled by a hydrogen-bonded supramolecular network. Composites Communications, 22:100530. pp. 1-7. ISSN 2452-2139

Shi, Yongqian and Liu, Chuan and Duan, Zaipeng and Yu, Bin and Liu, Minghua and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X (2020) Interface engineering of MXene towards super-tough and strong polymer nanocomposites with high ductility and excellent fire safety. Chemical Engineering Journal, 399:125829. pp. 1-14. ISSN 1385-8947

Liu, Yue and Tafsirojjaman, T. ORCID: https://orcid.org/0000-0002-4801-6744 and Dogar, Attiq Ur Rahman and Huckler, Alexander (2020) Shrinkage behavior enhancement of infra-lightweight concrete through FRP grid reinforcement and development of their shrinkage prediction models. Construction and Building Materials, 258:119649. pp. 1-12. ISSN 0263-8223

Feng, Jiabing and Xu, Xiaodong and Xu, Zhiguang and Xie, Hongyan and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Li, Lujuan and Huang, Guobo and Wang, Hao (2020) One-Pot, Solvent- and Catalyst-Free Synthesis of Polyphosphoramide as an Eco-Benign and Effective Flame Retardant for Poly(lactic acid). ACS Sustainable Chemistry & Engineering, 8 (44). pp. 16612-16623. ISSN 2168-0485

Xue, Yijiao and Feng, Jiabing and Huo, Siqi and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Yu, Bin and Liu, Lei and Wang, Hao (2020) Polyphosphoramide-intercalated MXene for simultaneously enhancing the thermal stability, flame retardancy and mechanical properties of polylactide. Chemical Engineering Journal, 397:125336. pp. 1-11. ISSN 1359-8368

Xiao, Xianglian and Chevali, Venkata S. ORCID: https://orcid.org/0000-0002-5648-0344 and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Yu, Bin and Yang, Yihu and Wang, Hao (2020) Enhanced toughness of PLLA/PCL blends using poly(d-lactide)-poly(ε-caprolactone)-poly(d-lactide) as compatibilizer. Composites Communications, 21:100385. pp. 1-6. ISSN 2452-2139

He, Wentao and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Yu, Bin and Fang, Zhengping and Wang, Hao (2020) Flame retardant polymeric nanocomposites through the combination of nanomaterials and conventional flame retardants. Progress in Materials Science, 114:100687. pp. 1-49. ISSN 0079-6425

Hota, Gangarao and Barker, William and Manalo, Allan (2020) Degradation mechanism of glass fiber/vinylester-based composite materials under accelerated and natural aging. Construction and Building Materials, 256:119462. pp. 1-12. ISSN 0950-0618

Sai, Ting and Ran, Shiya and Guo, Zhenghong and Yan, Hongqiang and Zhang, Yan and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Zhang, Tao and Wang, Hao and Fang, Zhengping (2020) Deposition growth of Zr-based MOFs on cerium phenylphosphonate lamella towards enhanced thermal stability and fire safety of polycarbonate. Composites Part B: Engineering, 197:108064. pp. 1-12. ISSN 1359-8368

Gunasekara, C. and Lokuge, W. ORCID: https://orcid.org/0000-0003-1370-1976 and Keskic, M. and Raj, N. and Law, D. W. and Setunge, S. (2020) Design of Alkali-Activated Slag-Fly Ash Concrete Mixtures Using Machine Learning. Materials Journal, 117 (5). pp. 263-278. ISSN 0889-325X

Chen, Lei and Weng, Yuehua and Meng, Yiming and Dou, Fei and An, Zhongxun and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Chen, Guorong and Zhang, Dengsong (2020) Integrated structure of tin-based anodes enhancing high power density and long cycle life for lithium ion batteries. ACS Applied Energy Materials, 3 (9). pp. 9337-9347.

Moudood, Abdul and Rahman, Anisur and Ochsner, Andreas and Islam, Md Mainul and Ali, Mohammad Yeakub and Francucci, Gaston (2020) Effects of Different Relative Humidities on Flax Fibers prior to Manufacturing Their Composites Based on the Shear Response. Advances in Materials Science and Engineering, 2020:4785970. pp. 1-7. ISSN 1687-8434

Herath, Madhubhashitha ORCID: https://orcid.org/0000-0002-6796-0802 and Epaarachchi, Jayantha and Islam, Mainul and Fang, Liang and Leng, Jinsong (2020) Light activated shape memory polymers and composites: A review. European Polymer Journal, 136 (5):109912. ISSN 0014-3057

Cao, Cheng-Fei and Wang, Peng-Huan and Zhang, Jian-Wang and Guo, Kun-Yu and Li, Yan and Xia, Qiao-Qi and Zhang, Guo-Dong and Zhao, Li and Chen, Heng and Wang, Luobin and Gao, Jie-Feng and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Tang, Long-Cheng (2020) One-step and green synthesis of lightweight, mechanically flexible and flame-retardant polydimethylsiloxane foam nanocomposites via surface-assembling ultralow content of graphene derivative. Chemical Engineering Journal, 393:124724. pp. 1-13. ISSN 1385-8947

Hassanli, Reza and Youssf, Osama and Vincent, Tom and Mills, Julie E. and Manalo, Allan and Gravina, Rebecca (2020) Experimental Study on Compressive Behavior of FRP-Confined Expansive Rubberized Concrete. Journal of Composites for Construction, 24 (4):04020034. pp. 1-14. ISSN 1090-0268

Zhang, Jin and Chevali, Venkata S. ORCID: https://orcid.org/0000-0002-5648-0344 and Wang, Hao and Wang, Chun-Hui (2020) Current status of carbon fibre and carbon fibre composites recycling. Composites Part B: Engineering, 193:108053. pp. 1-15. ISSN 1359-8368

Guo, Kun-Yu and Wu, Qian and Mao, Min and Chen, Heng and Zhang, Guo-Dong and Zhao, Li and Gao, Jie-Feng and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Tang, Long-Cheng (2020) Water-based hybrid coatings toward mechanically flexible, super-hydrophobic and flame-retardant polyurethane foam nanocomposites with high-efficiency and reliable fire alarm response. Composites Part B: Engineering, 193:108017. pp. 1-11. ISSN 1359-8368

Alajarmeh, Omar and Manalo, Allan and Benmokrane, Brahim and Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Mohammed, Ali and Abousnina, Rajab and Elchalakani, Mohamed and Edoo, Azam (2020) Behavior of circular concrete columns reinforced with hollow composite sections and GFRP bars. Marine Structures, 72:102785. pp. 1-17. ISSN 0951-8339

Reddy, Kakarla Raghava and El-Zein, Abbas and Airey, David W. and Alonso-Marroquin, Fernando and Schubel, Peter and Manalo, Allan (2020) Self-healing polymers: Synthesis methods and applications. Nano-Structures & Nano-Objects, 23:100500. pp. 1-21. ISSN 2352-507X

Xu, Xiaodong and Dai, Jinfeng and Ma, Zhewen and Liu, Lina and Zhang, Xinghong and Liu, Hongzhi and Tang, Long-Cheng and Huang, Guobo and Wang, Hao and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X (2020) Manipulating interphase reactions for mechanically robust, flame-retardant and sustainable polylactide biocomposites. Composites Part B: Engineering, 190:107930. pp. 1-15. ISSN 1359-8368

Benmokrane, B. and Hassan, M. and Robert, M. and Vijay, P. V. and Manalo, A. (2020) Effect of Different Constituent Fiber, Resin, and Sizing Combinations on Alkaline Resistance of Basalt, Carbon, and Glass FRP Bars. ASCE Journal of Composites for Construction, 24 (3):04020010. pp. 1-18. ISSN 1090-0268

Tafsirojjaman, T. ORCID: https://orcid.org/0000-0002-4801-6744 and Fawzia, Sabrina ORCID: https://orcid.org/0000-0002-1095-2940 and Thambiratnam, David ORCID: https://orcid.org/0000-0001-8486-5236 (2020) Numerical investigation on the CFRP strengthened steel frame under earthquake. Materials Science Forum, 995. pp. 123-129. ISSN 0255-5476

Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Wang, Hao (2020) High‐performance polymeric materials through hydrogen‐bond cross‐linking. Advanced Materials, 32 (18):1901244. ISSN 0935-9648

Zhang, Yan and Xiong, Zhengquan and Ge, Haodong and Ni, Leikun and Zhang, Tao and Huo, Siqi and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Fang, Zhengping (2020) Core–Shell Bioderived Flame Retardants Based on Chitosan/Alginate Coated Ammonia Polyphosphate for Enhancing Flame Retardancy of Polylactic Acid. ACS Sustainable Chemistry & Engineering, 8 (16). pp. 6402-6412. ISSN 2168-0485

Huo, Siqi and Yang, Shuang and Wang, Jun and Cheng, Jianwen and Zhang, Qianqian and Hu, Yefa and Ding, Guoping and Zhang, Qiaoxin and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X (2020) A liquid phosphorus-containing imidazole derivative as flame-retardant curing agent for epoxy resin with enhanced thermal latency, mechanical, and flame-retardant performances. Journal of Hazardous Materials, 386:121984. pp. 1-10. ISSN 0304-3894

Rasappagari, M.R.R. and Karunasena, W. and Lokuge, W. ORCID: https://orcid.org/0000-0003-1370-1976 (2020) Flexural Behavior of Functionally Graded-Graphene Reinforced Composite Plates. In: 25th Australasian Conference on Mechanics of Structures and Materials (ACMSM25), 4-7 Dec, 2018, Brisbane, Australia.

Liu, Shuai and Wang, Sheng and Xuan, Shouhu and Zhang, Shuaishuai and Fan, Xiwen and Jiang, Han and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Gong, Xinglong (2020) Highly Flexible Multilayered e-Skins for Thermal-Magnetic-Mechanical Triple Sensors and Intelligent Grippers. ACS Applied Materials & Interfaces, 12 (13). pp. 15675-15685. ISSN 1944-8244

Alajarmeh, O. S. and Manalo, A. C. and Benmokrane, B. and Karunasena, W. and Ferdous, W. ORCID: https://orcid.org/0000-0002-4473-4722 and Mendis, P. (2020) A New Design-Oriented Model of Glass Fiber-Reinforced Polymer-Reinforced Hollow Concrete Columns. ACI Structural Journal, 117 (2):117-S36. pp. 141-156. ISSN 0889-3241

Yang, Haitang and Yu, Bin and Xu, Xiaodong and Bourbigot, Serge and Wang, Hao and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X (2020) Lignin-derived bio-based flame retardants toward high-performance sustainable polymeric materials. Green Chemistry, 22 (7). pp. 2129-2161. ISSN 1463-9262

Herath, Madhubhashitha ORCID: https://orcid.org/0000-0002-6796-0802 and Epaarachchi, Jayantha and Islam, Mainul and Zhang, Fenghua and Leng, Jinsong and Fang, Liang and Yan, Cheng and Peng, Gang Ding and Schade, Wolfgang (2020) Remote actuation of light activated shape memory polymers via D-shaped optical fibres. Smart Materials and Structures, 29 (4):047001. ISSN 0964-1726

Xue, Yijiao and Shen, Mingxia and Zheng, Yifei and Tao, Wenzhu and Han, Yanxin and Li, Weidong and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Wang, Hao (2020) One-pot scalable fabrication of an oligomeric phosphoramide towards high-performance flame retardant polylactic acid with a submicron-grained structure. Composites Part B: Engineering, 183:107695. pp. 1-12. ISSN 1359-8368

Hizam, R. M. and Manalo, Allan C. and Karunasena, Warna and Bai, Yu (2020) Joint strength of single-bolted pultruded GFRP square hollow sections with mechanical inserts under elevated temperatures. Journal of Composites for Construction, 24 (1):04019056. pp. 1-15. ISSN 1090-0268

Fang, Fang and Huo, Siqi and Shen, Haifeng and Ran, Shiya and Wang, Hao and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Fang, Zhengping (2020) A bio-based ionic complex with different oxidation states of phosphorus for reducing flammability and smoke release of epoxy resins. Composites Communications, 17. pp. 104-108. ISSN 2452-2139

Dinh, Toan ORCID: https://orcid.org/0000-0002-7489-9640 and Nguyen, Thanh and Dau, Van Thanh and Riduan, Foisal Abu and Tran, Canh-Dung ORCID: https://orcid.org/0000-0002-1011-4226 and Phan, Hoang-Phuong and Nguyen, Tuan-Khoa and Guzman, Pablo and Nguyen, Nam-Trung and Dao, Dzung Viet (2020) Flexible and wearable flow sensor using spinnable carbon nanotube nanofilm for respiration monitoring. In: 33rd IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2020), 18-22 Jan 2020, Vancouver, Canada.

Alajarmeh, O. S. and Manalo, A. C. and Benmokrane, B. and Karunasena, K. and Ferdous, W. ORCID: https://orcid.org/0000-0002-4473-4722 and Mendis, P. (2020) Hollow concrete columns: review of structural behavior and new designs using GFRP reinforcement. Engineering Structures, 203:109829. pp. 1-16. ISSN 0141-0296

Sun, Yiqi and Ma, Zhewen and Xu, Xiaodong and Liu, Xiaohuan and Liu, Lina and Huang, Guobo and Liu, Lei and Wang, Hao and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X (2020) Grafting Lignin with Bioderived Polyacrylates for Low-Cost, Ductile, and Fully Biobased Poly(lactic acid) Composite. ACS Sustainable Chemistry & Engineering, 8 (5). pp. 2267-2276. ISSN 2168-0485

Alajarmeh, Omar S. and Manalo, Allan C. and Benmokrane, Brahim and Karunasena, Warna and Mendis, Priyan (2020) Effect of spiral spacing and concrete strength on behavior of GFRP-reinforced hollow concrete columns. Journal of Composites for Construction, 24 (1):04019054. pp. 1-14. ISSN 1090-0268

Alajarmeh, Omar Saleh Awad (2020) Compressive behavior of hollow concrete columns reinforced with GFRP bars. [Thesis (PhD/Research)]

Jeewantha, Lama Hewage Janitha ORCID: https://orcid.org/0000-0002-0244-6159 and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2020) Development of Smart Materials for Invasive Medical Applications Using Shape Memory Polymers. In: 6th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2020), 19-21 Dec 2020, Khulna, Bangladesh.

Xiao, Xianglian (2020) Development of thermoplastic 3D printing feedstock utilising biomass. [Thesis (PhD/Research)]

Salleh, Zulzamri and Islam, M. and Epaarachchi, J. and Zulkarnain, M. and Ahmed, Yaseen Adenan (2020) Flexural Analysis for Syntactic Foam Sandwich Panels. In: Regional Conference on Marine and Mechanical Engineering (ReMME'18), 7-9 Nov 2018, Ipoh, Malaysia.

Zangana, Sartip (2020) Impact behaviour of an innovative trapezoidal composite corrugated core sandwich structure under low-velocity impact: an experimental and numerical study. [Thesis (PhD/Research)]

Herath, Herath Mudiyanselage Chathura Madhubhashitha ORCID: https://orcid.org/0000-0002-6796-0802 (2020) Light activated shape memory polymer composite based smart structures: a framework for material development and activation methodologies. [Thesis (PhD/Research)]

Tafsirojjaman, T. ORCID: https://orcid.org/0000-0002-4801-6744 and Fawzia, Sabrina and Thambiratnam, David and Zhao, X. L. (2020) Numerical investigation of CFRP strengthened RHS members under cyclic loading. Structures, 24. pp. 610-626.

Al-Saadi, A.U. and Aravinthan, T. and Lokuge, W. ORCID: https://orcid.org/0000-0003-1370-1976 (2020) Numerical Investigation on Hollow Pultruded Fibre Reinforced Polymer Tube Columns. In: 25th Australasian Conference on Mechanics of Structures and Materials (ACMSM25), 4–7 Dec, 2018, Brisbane, Australia.

Tafsirojjaman, T. ORCID: https://orcid.org/0000-0002-4801-6744 and Fawzia, Sabrina and Thambiratnam, David and Zhao, X. L. (2020) Study on the cyclic bending behaviour of CFRP strengthened full-scale CHS members. Structures, 28. pp. 741-756.

Shi, Yongqian and Liu, Chuan and Liu, Lu and Fu, Libu and Yu, Bin and Lv, Yuancai and Yang, Fuqiang and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X (2019) Strengthening, toughing and thermally stable ultra-thin MXene nanosheets/polypropylene nanocomposites via nanoconfinement. Chemical Engineering Journal, 378:122267. pp. 1-12. ISSN 1385-8947

Herath, Madhubhashitha ORCID: https://orcid.org/0000-0002-6796-0802 and Epaarachchi, Jayantha and Islam, Mainul and Yan, Cheng and Zhang, Fenghua and Leng, Jinsong (2019) Effects of selectively triggered photothermal particles on shape memory polymer composites: an investigation on structural performance, thermomechanical characteristics and photothermal behaviour. Journal of Intelligent Material Systems and Structures, 30 (20). pp. 3124-3135. ISSN 1045-389X

Alajarmeh, O. S. and Manalo, A. C. and Benmokrane, B. and Vijay, P. V. and Ferdous, W. ORCID: https://orcid.org/0000-0002-4473-4722 and Mendis, P. (2019) Novel testing and characterization of GFRP bars in compression. Construction and Building Materials, 225. pp. 1112-1126. ISSN 0950-0618

Yu, Zhi-Ran and Li, Shi-Neng and Zang, Jing and Zhang, Ming and Gong, Li-Xiu and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Zhao, Li and Zhang, Guo-Dong and Tang, Long-Cheng (2019) Enhanced mechanical property and flame resistance of graphene oxide nanocomposite paper modified with functionalized silica nanoparticles. Composites Part B: Engineering, 177:107347. pp. 1-9. ISSN 1359-8368

Huang, Guobo and Huo, Siqi and Xu, Xiaodong and Chen, Wei and Jin, Yanxian and Li, Rongrong and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Wang, Hao (2019) Realizing simultaneous improvements in mechanical strength, flame retardancy and smoke suppression of ABS nanocomposites from multifunctional graphene. Composites Part B: Engineering, 177:107377. pp. 1-10. ISSN 1359-8368

Xue, Yijiao and Shen, Mingxia and Zeng, Shaohua and Zhang, Wei and Hao, Lingyun and Yang, Lu and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X (2019) A novel strategy for enhancing the flame resistance, dynamic mechanical and the thermal degradation properties of epoxy nanocomposites. Materials Research Express, 6 (12):125003. pp. 1-12. ISSN 2053-1591

Zhang, Tao and Yu, Qiuyan and Fang, Lanlan and Wang, Jiajun and Wu, Tao and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X (2019) All-Organic Multilayer Coatings for Advanced Poly(lactic acid) Films with High Oxygen Barrier and Excellent Antifogging Properties. ACS Applied Polymer Materials, 1 (12). pp. 3470-3476. ISSN 2637-6105

Al-Saadi, Ali Umran and Aravinthan, Thiru and Lokuge, Weena ORCID: https://orcid.org/0000-0003-1370-1976 (2019) Effects of fibre orientation and layup on the mechanical properties of the pultruded glass fibre reinforced polymer tubes. Engineering Structures, 198:109448. pp. 1-16. ISSN 0141-0296

Yang, Haitang and Yu, Bin and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Maluk, Cristian and Wang, Hao (2019) Surface-coating engineering for flame retardant flexible polyurethane foams: A critical review. Composites Part B: Engineering, 176:107185. pp. 1-14. ISSN 1359-8368

Alantali, A. and Alia, R. A. and Umer, R. and Cantwell, W. J. (2019) Energy absorption in aluminium honeycomb cores reinforced with carbon fibre reinforced plastic tubes. Journal of Sandwich Structures and Materials, 21 (8). pp. 2801-2815. ISSN 1099-6362

Qian, Mengbo and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Qin, Zhe and Yan, Shaozhe and Zhang, Lin (2019) Mechanically robust and abrasion-resistant polymer nanocomposites for potential applications as advanced clearance joints. Composites Part A: Applied Science and Manufacturing, 126:105607. pp. 1-10. ISSN 1359-835X

Liu, Hongzhi and Chen, Ning and Shan, Pengjia and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Liu, Xuying and Chen, Jinzhou (2019) Toward Fully Bio-based and Supertough PLA Blends via in Situ Formation of Cross-Linked Biopolyamide Continuity Network. Macromolecules, 52 (21). pp. 8415-8429. ISSN 0024-9297

Liu, Lina and Wang, Zhenyu and Yu, Youming and Fu, Shenyuan and Nie, Yujing and Wang, Hao and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X (2019) Engineering Interfaces toward High-Performance Polypropylene/Coir Fiber Biocomposites with Enhanced Friction and Wear Behavior. ACS Sustainable Chemistry & Engineering, 7 (22). pp. 18453-18462. ISSN 2168-0485

Xiao, Xianglian and Chevali, Venkata S. ORCID: https://orcid.org/0000-0002-5648-0344 and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and He, Dongning and Wang, Hao (2019) Polylactide/hemp hurd biocomposites as sustainable 3D printing feedstock. Composites Science and Technology, 184. pp. 1-8. ISSN 0266-3538

Tran, Canh-Dung ORCID: https://orcid.org/0000-0002-1011-4226 and Le-Cao, Khoa and Bui, Tunng Thanh and Dau, Van Thanh (2019) Dielectrophoresis can control the density of CNT membranes as confirmed by experiment and dissipative particle simulation. Carbon, 155. pp. 279-286. ISSN 0008-6223

Zhang, Wei and Yao, Xiao and Yang, Tao and Zhang, Zuhua (2019) Effect of calcined dolomite addition on sodium carbonate-activated slag cements with different curing methods. Advances in Cement Research, 31 (8). pp. 370-381. ISSN 0951-7197

Zhang, Tao and Fang, Lanlan and Lin, Nan and Wang, Jiajun and Wang, Yongguang and Wu, Tao and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X (2019) Highly transparent, healable, and durable anti-fogging coating by combining hydrophilic pectin and tannic acid with the poly(ethylene terephthalate). Green Chemistry, 21 (19). pp. 5405-5413. ISSN 1463-9262

Herath, Madhubhashitha ORCID: https://orcid.org/0000-0002-6796-0802 and Epaarachchi, Jayantha and Islam, Mainul and Fang, Liang and Zhang, Fenghua and Leng, Jinsong (2019) Performance of rare earth organic complexes based light activated shape memory polymer composites. In: 22nd International Conference on Composites Materials (ICCM22), 11-16 Aug 2019, Melbourne, Australia.

Ran, Shiya and Fang, Fang and Guo, Zhenghong and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Cai, Yingfeng and Fang, Zhengping and Wang, Hao (2019) Synthesis of decorated graphene with P, N-containing compounds and its flame retardancy and smoke suppression effects on polylactic acid. Composites Part B: Engineering, 170. pp. 41-50. ISSN 1359-8368

Wang, Hangning and Fang, Liang and Zhang, Zhen and Epaarachchi, Jayantha and Li, Lingyu and Hu, Xin and Lu, Chunhua and Xu, Zhongzi (2019) Light-induced rare earth organic complex/shape-memory polymer composites with high strength and luminescence based on hydrogen bonding. Composites Part A: Applied Science and Manufacturing, 125. pp. 1-9. ISSN 1359-835X

Tafsirojjaman, T. ORCID: https://orcid.org/0000-0002-4801-6744 and Fawzia, Sabrina and Thambiratnam, David and Zhao, Xiao-Ling (2019) Behaviour of CFRP strengthened CHS members under monotonic and cyclic loading. Composite Structures, 220. pp. 592-601. ISSN 0263-8223

Hizam, R. M. and Manalo, Allan C. and Karunasena, Warna and Bai, Yu (2019) Behaviour of pultruded GFRP truss system connected using through-bolt with mechanical insert. Composites Part B: Engineering, 168. pp. 44-57. ISSN 1359-8368

Wang, Jieming and Liu, Dan and Li, Quanxiang and Chen, Cheng and Chen, Zhiqiang and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Hao, Jian and Li, Yingwei and Fakhrhoseini, Sobhan and Naebe, Minoo and Wang, Xungai and Lei, Weiwei (2019) Lightweight, Superelastic Yet Thermoconductive Boron Nitride Nanocomposite Aerogel for Thermal Energy Regulation. ACS Nano, 13 (7). pp. 7860-7870. ISSN 1936-0851

Herath, M. ORCID: https://orcid.org/0000-0002-6796-0802 and James, G. and Epaarachchi, J. (2019) Mechanical properties and thermomechanical behaviour of poly (ethylene-co-vinyl acetate) based shape memory polymer composites. In: 13th International Conference on the Mechanical Behaviour of Materials (ICM13), 11-14 June 2019, Melbourne, Australia.

He, Wentao and Gao, Jing and Liao, Shengtao and Wang, Xinxin and Qin, Shuhao and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X (2019) A facile method to improve thermal stability and flame retardancy of polyamide 6. Composites Communications, 13. pp. 143-150. ISSN 2452-2139

Azwa, Z. N. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2019) Physical and mechanical properties of bamboo fibre/polyester composites subjected to moisture and hygrothermal conditions. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 233 (6). ISSN 1464-4207

Salleh, Z. and Islam, M. M. and Epaarachchi, J. A. and Khan, M. T. I. (2019) Thermo-mechanical properties of fused borosilicate syntactic foams. Journal of Mechanical Engineering and Sciences, 13 (2). pp. 4898-4910. ISSN 2289-4659

Fang, Fang and Ran, Shiya and Fang, Zhengping and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Wang, Hao (2019) Improved flame resistance and thermo-mechanical properties of epoxy resin nanocomposites from functionalized graphene oxide via self-assembly in water. Composites Part B: Engineering, 165. pp. 406-416. ISSN 1359-8368

Herath, H. M. C. M. ORCID: https://orcid.org/0000-0002-6796-0802 and Epaarachchi, J. A. and Islam, M. M. and Leng, J. (2019) Carbon fibre reinforced shape memory polymer composites for deployable space habitats. Engineer, LII (1). pp. 1-9.

Moudood, Abul and Rahman, Anisur and Ochsner, Andreas and Islam, Mainul and Francucci, Gaston (2019) Flax fiber and its composites: an overview of water and moisture absorption impact on their performance. Journal of Reinforced Plastics and Composites, 38 (7). pp. 323-339. ISSN 0731-6844

Xiong, Zhengquan and Zhang, Yan and Du, Xiaoyang and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Fang, Zhengping (2019) Green and Scalable Fabrication of Core–Shell Biobased Flame Retardants for Reducing Flammability of Polylactic Acid. ACS Sustainable Chemistry & Engineering, 7 (9). pp. 8954-8963. ISSN 2168-0485

Al Azzawi, Wessam and Herath, Madhubhashitha ORCID: https://orcid.org/0000-0002-6796-0802 and Epaarachchi, Jayantha (2019) Modeling, analysis, and testing of viscoelastic properties of shape memory polymer composites and a brief review of their space engineering applications. In: Creep and fatigue in polymer matrix composites, 2nd ed. Woodhead Publishing Series in Composites Science and Engineering. Woodhead Publishing Limited, United Kingdom, pp. 465-495. ISBN 978-0-08-102601-4

Yang, Hanbin and Zhu, Xinqiang and Zhu, Enhui and Lou, Gaobo and Wu, Yatao and Lu, Yingzhuo and Wang, Hanyu and Song, Jintao and Tao, Yingjie and Pei, Gu and Chu, Qindan and Chen, Hao and Ma, Zhongqing and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Shen, Zhehong (2019) Electrochemically Stable Cobalt-Zinc Mixed Oxide/hydroxide Hierarchical Porous Film Electrode for High-performance Asymmetric Supercapacitor. Nanomaterials, 9 (3):345. pp. 1-16. ISSN 2079-4991

Tafsirojjaman, T. ORCID: https://orcid.org/0000-0002-4801-6744 and Fawzia, S. and Thambiratnam, D. and Zhao, X. L. (2019) Seismic strengthening of rigid steel frame with CFRP. Archives of Civil and Mechanical Engineering, 19 (2). pp. 334-347. ISSN 1644-9665

Yan, Shibo and Zeng, Xuesen and Long, Andrew (2019) Meso-scale modelling of 3D woven composite T-joints with weave variations. Composites Science and Technology, 171. pp. 171-179. ISSN 0266-3538

Zhang, Zuhua and Zhu, Yingcan ORCID: https://orcid.org/0000-0003-4087-0169 and Zhu, Huajun and Zhang, Yu and Provis, John L. and Wang, Hao (2019) Effect of drying procedures on pore structure and phase evolution of alkali-activated cements. Cement and Concrete Composites, 96. pp. 194-203. ISSN 0958-9465

Dinh, Toan ORCID: https://orcid.org/0000-0002-7489-9640 and Nguyen, Tuan-Khoa and Phan, Hoang-Phuong and Tran, Canh-Dung ORCID: https://orcid.org/0000-0002-1011-4226 and Dau, Van and Nguyen, Nam-Trung and Dao, Dzung Viet (2019) Carbon nanotube four-terminal devices for pressure sensing applications. In: Sustainable design and manufacturing 2018: proceedings of the 5th international conference on sustainable design and manufacturing (KES-SDM-18). Smart Innovation, Systems and Technologies, v. 130, 130. Springer Nature, Switzerland, pp. 199-208. ISBN 978-3-030-04289-9

Tafsirojjaman, T. ORCID: https://orcid.org/0000-0002-4801-6744 and Fawzia, S. and Thambiratnam, D. (2019) Enhancement of Seismic Performance of Steel Frame through CFRP Strengthening. Procedia Manufacturing, 30. pp. 239-246. ISSN 2351-9789

Kakei, Ayad Arab Ghaidan (2019) Prediction of delamination in glass fibre reinforced composite materials using elasto-plastic modelling. [Thesis (PhD/Research)]

Jeewantha, Lama Hewage Janitha ORCID: https://orcid.org/0000-0002-0244-6159 and Islam, Md Mainul and Epaarachchi, Jayantha Amanda (2019) Recent Progress in Shape Memory Polymers in Biomedical Applications. In: 1st International Conference on Mechanical and Manufacturing Engineering Research and Practice (iCMMERP-2019), 24-28 Nov, 2019, Sydney, Australia.

Albdiry, M. T. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2019) Toughening of brittle polyester with functionalized halloysite nanocomposites. Composites Part B: Engineering, 160. pp. 94-109. ISSN 1359-8368

Cao, Ruilin and Li, Baoliang and You, Nanqiao and Zhang, Yamei and Zhang, Zuhua (2018) Properties of alkali-activated ground granulated blast furnace slag blended with ferronickel slag. Construction and Building Materials, 192. 123-132. ISSN 0950-0618

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Ngo, Tuan Duc and Nguyen, Kate T. Q. and Ghazlan, Abdallah and Mendis, Priyan and Manalo, Allan (2018) Effect of fire-retardant ceram powder on the properties of phenolic-based GFRP composites. Composites Part B: Engineering, 155. pp. 414-424. ISSN 1359-8368

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2018) Thermal expansion properties of fused borosilicate syntactic foams. Nano Hybrids and Composites, 23. pp. 39-45. ISSN 2297-3400

Liu, Yi and Yan, Chunjie and Zhao, Junjie and Zhang, Zuhua and Wang, Hongquan and Zhou, Sen and Wu, Linmei (2018) Synthesis of zeolite P1 from fly ash under solvent-free conditions for ammonium removal from water. Journal of Cleaner Production, 202. pp. 11-22. ISSN 0959-6526

Al-Saadi, Ali Umran and Aravinthan, Thiru and Lokuge, Weena ORCID: https://orcid.org/0000-0003-1370-1976 (2018) Structural applications of fibre reinforced polymer (FRP) composite tubes: a review of columns members. Composite Structures, 204. pp. 513-524. ISSN 0263-8223

Viet, N. V. and Zaki, W. and Umer, R. (2018) Analytical model of functionally graded material/shape memory alloy composite cantilever beam under bending. Composite Structures, 203. pp. 764-776. ISSN 0263-8223

Shi, Zhenguo and Shi, Caijun and Wan, Shu and Li, Ning and Zhang, Zuhua (2018) Effect of alkali dosage and silicate modulus on carbonation of alkali-activated slag mortars. Cement and Concrete Research, 113. pp. 55-64. ISSN 0008-8846

Wang, Aiguo and Lyu, Bangcheng and Zhang, Zuhua and Liu, Kaiwei and Xu, Haiyan and Sun, Daosheng (2018) The development of coral concretes and their upgrading technologies: a critical review. Construction and Building Materials, 187. pp. 1004-1019. ISSN 0950-0618

Herath, H. M .C. M. ORCID: https://orcid.org/0000-0002-6796-0802 and Epaarachchi, J. A. and Islam, M. M. and Al-Azzawi, W. and Leng, J. and Zhang, F. (2018) Structural performance and photothermal recovery of carbon fibre reinforced shape memory polymer. Composites Science and Technology, 167. pp. 206-214. ISSN 0266-3538

Li, Ning and Shi, Caijun and Zhang, Zuhua and Zhu, Deju and Hwang, Hyeon-Jong and Zhu, Yuhan and Sun, Tengjiao (2018) A mixture proportioning method for the development of performance-based alkali-activated slag-based concrete. Cement and Concrete Composites, 93. pp. 163-174. ISSN 0958-9465

Zhang, Wei and Yao, Xiao and Yang, Tao and Zhang, Zuhua (2018) The degradation mechanisms of alkali-activated fly ash/slag blend cements exposed to sulphuric acid. Construction and Building Materials, 186. pp. 1177-1187. ISSN 0950-0618

Shi, Zhenguo and Shi, Caijun and Wan, Shu and Zhang, Zuhua (2018) Effects of alkali dosage and silicate modulus on alkali-silica reaction in alkali-activated slag mortars. Cement and Concrete Research, 111. pp. 104-115. ISSN 0008-8846

Zhang, Zuhua and Provis, John L. and Reid, Andrew and Wang, Hao (2018) Efflorescence and subflorescence induced microstructural and mechanical evolution in fly ash-based geopolymers. Cement and Concrete Composites, 92. pp. 165-177. ISSN 0958-9465

Misnon, M. I. and Islam, M. M. and Epaarachchi, J. A. and Chen, H. and Goda, K. and Khan, M. T. I. (2018) Flammability characteristics of chemical treated woven hemp fabric reinforced vinyl ester composites. Science and Technology of Materials, 30 (3). pp. 174-188. ISSN 2603-6363

Al Azzawi, Wessam and Epaarachchi, J. A. and Leng, Jinsong (2018) Investigation of ultraviolet radiation effects on thermomechanical properties and shape memory behaviour of styrene-based shape memory polymers and its composite. Composites Science and Technology, 165. pp. 266-273. ISSN 0266-3538

Hizam, R. M. and Manalo, Allan C. and Karunasena, Warna and Bai, Yu (2018) Effect of bolt threads on the double lap joint strength of pultruded fibre reinforced polymer composite materials. Construction and Building Materials, 181. pp. 185-198. ISSN 0950-0618

Viet, N. V. and Zaki, W. and Umer, R. (2018) Bending models for superelastic shape memory alloy laminated composite cantilever beams with elastic core layer. Composites Part B, 147. pp. 86-103. ISSN 1359-8368

Shelley, Tristan J. ORCID: https://orcid.org/0000-0002-4812-0285 and Dickinson, Calum P. M. and Tew, Hannah and Scaife, Richard J. (2018) A study on rapid forming of aerospace stiffeners. In: SAMPE Europe - Conference Southamphon 2018, 11-13 Sept 2018, Southampton, United Kingdom.

Kandare, E. and Yoo, S. and Chevali, V. S. ORCID: https://orcid.org/0000-0002-5648-0344 and Khatibi, A. A. (2018) On the notch sensitivity of flax fibre metal laminates under static and fatigue loading. Fatigue and Fracture of Engineering Materials and Structures, 41 (8). pp. 1691-1705. ISSN 1460-2695

Shelley, Tristan J, ORCID: https://orcid.org/0000-0002-4812-0285 and Dickinson, Calum P. M. and Tew, Hannah and Scaife, Richard J. (2018) A study on rapid forming of aerospace stiffeners. In: SAMPE Europe - Conference Southamphon 2018, 11-13 Sept 2018, Southampton, United Kingdom.

Bode, Rajesh Reddy and Islam, Md Mainul and Mahmood, Muhammad Nateque (2018) Compression and flexural properties of ground macadamia nutshell particulate composites. In: 11th Asian-Australasian Conference on Composite Materials (ACCM-11), 29 July - 1 August 2018, Cairns, Australia.

Herath, Madhubhashitha ORCID: https://orcid.org/0000-0002-6796-0802 and Epaarachchi, Jayantha and Islam, Mainul and Leng, Jinsong (2018) Near infrared light activated shape memory polymer composite for space applications. In: 11th Asian-Australasian Conference on Composite Materials (ACCM-11), 29 July - 1 August 2018, Cairns, Australia.

Yang, Tao and Zhu, Huajun and Zhang, Zuhua and Gao, Xuan and Zhang, Changsen and Wu, Qisheng (2018) Effect of fly ash microsphere on the rheology and microstructure of alkali-activated fly ash/slag pastes. Cement and Concrete Research, 109. pp. 198-207. ISSN 0008-8846

Abousnina, Rajab and Manalo, Allan and Lokuge, Weena ORCID: https://orcid.org/0000-0003-1370-1976 and Zhang, Zuhua (2018) Effects of light crude oil contamination on the physical and mechanical properties of geopolymer cement mortar. Cement and Concrete Composites, 90. pp. 136-149. ISSN 0958-9465

Dinh, Toan ORCID: https://orcid.org/0000-0002-7489-9640 and Nguyen, Tuan-Khoa and Phan, Hoang-Phuong and Ghavamian, Ali and Tran, Canh-Dung ORCID: https://orcid.org/0000-0002-1011-4226 and Dau, Thanh-Van and Nguyen, Nam-Trung and Dao, Dzung Viet (2018) Carbon nanotube four-terminal devices for pressure sensing applications. In: KES International Conferences on Sustainable Design and Manufacturing (SDM-18) and Sustainability in Energy and Buildings (SEB-18), 24-26 June 2018, Gold Coast, Australia.

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Khan, Md Tawhidul Islam (2018) Effects of water absorption on mechanical properties of glass microballoons/vinyl ester syntactic foams. Research and Reviews in Materials Science and Chemistry, 8 (1). pp. 59-119.

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Bai, Yu and Almutairi, Ahmed D. and Satasivam, Sindu and Jeske, Juri (2018) Modular assembly of water-retaining walls using GFRP hollow profiles: Components and connection performance. Composite Structures, 194. pp. 1-11. ISSN 0263-8223

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Aravinthan, Thiru and Fam, Amir (2018) Flexural and shear behaviour of layered sandwich beams. Construction and Building Materials, 173. pp. 429-442. ISSN 0950-0618

Huang, Guobo and Han, Deman and Jin, Yanxian and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Yan, Qidong and Gao, Chao (2018) Fabrication of nitrogen-doped graphene decorated with organophosphor and lanthanum towards high-performance polymer nanocomposites. ACS Applied Nano Materials, 1 (7). pp. 3204-3213. ISSN 2574-0970

Shi, Zhenguo and Shi, Caijun and Zhang, Jian and Zhang, Zuhua and Ou, Zhihua (2018) Alkali-silica reaction in waterglass-activated slag mortars incorporating fly ash and metakaolin. Cement and Concrete Research, 108. pp. 10-19. ISSN 0008-8846

Zhang, Wei and Yao, Xiao and Yang, Tao and Liu, Cun and Zhang, Zuhua (2018) Increasing mechanical strength and acid resistance of geopolymers by incorporating different siliceous materials. Construction and Building Materials, 175. pp. 411-421. ISSN 0950-0618

Schubel, P. and Umer, R. and Boateng, E. K. G. (2018) Modelling heat transfer through an FBG optical fibre. Composites Part A : Applied Science and Manufacturing, 109. pp. 184-196. ISSN 1359-835X

Reddy, R. Muni Rami and Karunasena, W. and Lokuge, W. ORCID: https://orcid.org/0000-0003-1370-1976 (2018) Free vibration of functionally graded-GPL reinforced composite plates with different boundary conditions. Aerospace Science and Technology, 78. pp. 147-156. ISSN 1270-9638

Manalo, Allan and Pac, Mac (2018) Structural behaviour of pultruded fibre composites guardrail system under horizontal loading. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232 (4). pp. 273-286. ISSN 1464-4207

Umer, R. and Barsoum, Z. and Jishi, H. Z. and Ushijima, K. and Cantwell, W. J. (2018) Analysis of the compression behaviour of different composite lattice designs. Journal of Composite Materials, 52 (6). pp. 715-729. ISSN 0021-9983

Misnon, Mohd Iqbal and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Chen, Haizhen and Goda, Koichi and Khan, Md Tawhidul Islam (2018) Flammability characteristics of chemical treated woven hemp fabric. Advances in Materials Science and Engineering, 5 (1). pp. 1-20. ISSN 1687-8434

Herath, Madhubhashitha ORCID: https://orcid.org/0000-0002-6796-0802 and Al-Azzawi, Wessam and Epaarachchi, Jayantha and Islam, Mainul and Robertson, Scott and Leng, Jinsong and Zhang, F. (2018) Thermo-mechanical behaviour and shape memory characteristics of carbon fibre reinforced epoxy. In: 2018 International Conference on Nanoscience and Nanotechnology (ICONN 2018), 29 Jan - 2 Feb 2018, Wollongong, NSW, Australia.

Zhang, Yu and Zhang, Zuhua and Li, Xuerun and Li, Weifeng and Shen, Xiaodong and Wang, Hao (2018) Effect of welan gum on the hydration and hardening of Portland cement. Journal of Thermal Analysis and Calorimetry, 131 (2). pp. 1277-1286. ISSN 1388-6150

Turner, Paul and Liu, Tao and Zeng, Xuesen and Brown, Kevin (2018) Three-dimensional woven carbon fibre polymer composite beams and plates under ballistic impact. Composite Structures, 185. pp. 483-495. ISSN 0263-8223

Khan, Belas Ahmed and Na, Haining and Chevali, Venkata ORCID: https://orcid.org/0000-0002-5648-0344 and Warner, Philip and Zhu, Jin and Wang, Hao (2018) Glycidyl methacrylate-compatibilized poly(lactic acid)/hemp hurd biocomposites: processing, crystallization, and thermo-mechanical response. Journal of Materials Science and Technology, 34 (2). pp. 387-397. ISSN 1005-0302

Viet, N. V. and Zaki, W. and Umer, R. (2018) Interlaminar shear stress function for adhesively bonded multi-layer metal laminates. International Journal of Adhesion and Adhesives, 82. pp. 14-20. ISSN 0143-7496

Endruweit, A. and Zeng, X. and Matveev, M. and Long, A. C. (2018) Effect of yarn cross-sectional shape on resin flow through inter-yarn gaps in textile reinforcements. Composites Part A: Applied Science and Manufacturing, 104. pp. 139-150. ISSN 1359-835X

Rusmi, Mohammad Hizam Shah (2018) Behaviour of bolted connection system in pultruded GFRP structures. [Thesis (PhD/Research)]

Batuwitage, C. and Fawzia, S. and Thambiratnam, D. P. and Tafsirojjaman, T. ORCID: https://orcid.org/0000-0002-4801-6744 and Al-Mahaidi, Riadh and Elchalakani, Mohamed (2018) CFRP-wrapped hollow steel tubes under axial impact loading. In: 16th International Symposium for Tubular Structures (ISTS 2017), 4-6 Dec 2017, Melbourne, Australia.

Abdollahnejad, Zahra and Zhang, Zuhua and Wang, Hao and Mastali, Mohammad (2018) Comparative Study on the drying shrinkage and mechanical properties of geopolymer foam concrete incorporating different dosages of fiber, sand and foam agents. In: 2017 fib Symposium: High Tech Concrete: Where Technology and Engineering Meet, 12-14 June 2017, Maastricht, The Netherlands.

Alam, M. I. and Fawzia, S. and Tafsirojjaman, T. ORCID: https://orcid.org/0000-0002-4801-6744 and Zhao, X. L. (2018) FE modeling of FRP strengthened CHS members subjected to lateral impact. In: 16th International Symposium on Tubular Structures (ISTS 2017), 4-6 Dec 2017, Melbourne, Australia.

Alantali, A. and Alia, R. A. and Umer, R. and Cantwell, W. J. (2018) Scaling effects in the manufacture and testing of grid-stiffened composite structures. Journal of Composite Materials, 52 (17). pp. 2351-2363. ISSN 0021-9983

Alshammari, F. Z. and Saleh, K. H. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Alajmi, A. and Shalwan, A. and Alotaibi, J. G. (2018) The influence of fibre orientation on tribological performance of jute fibre reinforced epoxy composites considering different mat orientations. Tribology in Industry, 40 (3). pp. 335-348. ISSN 0354-8996

Al Azzawi, Wessam and Epaarachchi, J. A. and Islam, Mainul and Leng, Jinsong (2017) Implementation of a finite element analysis procedure for structural analysis of shape memory behaviour of fibre reinforced shape memory polymer composites. Smart Materials and Structures, 26 (12). ISSN 0964-1726

Al Azzawi, Wessam and Islam, Mainul M. and Leng, Jinsong and Li, Fengfeng and Epaarachchi, Jayantha A. (2017) Quantitative and qualitative analysis of mechanical behavior and dimensional stability of styrene-based shape memory composites. Journal of Intelligent Material Systems and Structures, 28 (20). pp. 3115-3126. ISSN 1045-389X

Aziz, A. R. and Ali, M. A. and Zeng, X. and Umer, R. and Schubel, P. and Cantwell, W. J. (2017) Transverse permeability of dry fiber preforms manufactured by automated fiber placement. Composites Science and Technology, 152. pp. 57-67. ISSN 0266-3538

Benmokrane, Brahim and Nazair, Claude and Seynave, Xavier and Manalo, Allan (2017) Comparison between ASTM D7205 and CSA S806 tensile-testing methods for glass-fiber-reinforced-polymer bars. Journal of Composites for Construction, 21 (5). pp. 1-13. ISSN 1090-0268

Benmokrane, Brahim and Manalo, Allan and Bouhet, Jean-Charles and Mohamed, Khaled and Robert, Mathieu (2017) Effects of diameter on the durability of glass-fiber-reinforced-polymer (GFRP) bars conditioned in alkaline solution. Journal of Composites for Construction, 21 (5). pp. 1-12. ISSN 1090-0268

Al Antali, A. and Umer, R. and Zhou, J. and Cantwell, W. J. (2017) The energy-absorbing properties of composite tube-reinforced aluminum honeycomb. Composite Structures, 176. pp. 630-639. ISSN 0263-8223

Manalo, Allan and Maranan, Ginghis and Sharma, Sukrant and Karunasena, Warna and Bai, Yu (2017) Temperature-sensitive mechanical properties of GFRP composites in longitudinal and transverse directions: a comparative study. Composite Structures, 173. pp. 255-267. ISSN 0263-8223

Al Azzawi, Wessam and Epaarachchi, Jayantha A. and Leng, Jinsong (2017) Evaluating the temperature and glass fibre reinforcement effects on the damping properties of the shape memory polymers. In: 21st International Conference on Composite Materials (ICCM 21), 20-25 Aug 2017, Xi’an, China.

Deng, Layun and He, Hongchen and Chen, Zejun and Liu, Shan and Chevali, Venkata S. ORCID: https://orcid.org/0000-0002-5648-0344 (2017) Effects of wood fiber size on the performance of biodegradable foam. Journal of Biobased Materials and Bioenergy, 11 (3). pp. 206-209. ISSN 1556-6560

Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Wang, Cong and Chen, Lei and Zheng, Yiqi and Liu, Lina and Wu, Qiang and Huang, Guobo and Yu, Youming and Wang, Hao (2017) Thermally stable, conductive and flame-retardant nylon 612 composites created by adding two-dimensional alumina platelets. Composites Part A: Applied Science and Manufacturing, 97. pp. 100-110. ISSN 1359-835X

Zhuang, Linzhou and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Yang, Yisu and Li, Mengran and Jia, Yi and Yao, Xiangdong and Zhu, Zhonghua (2017) Ultrathin iron-cobalt oxides nanosheets with abundant oxygen vacancies for oxygen evolution reaction. Advanced Materials, 29 (17). p. 1606793. ISSN 0935-9648

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2017) Durability characteristics and property prediction of glass fibre reinforced mixed plastics composites. Composites Part B: Engineering, 116. pp. 16-29. ISSN 1359-8368

Khan, Ziaullah and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Islam, Mainul (2017) Fracture behaviour of bamboo fiber reinforced epoxy composites. Composites Part B: Engineering, 116. pp. 186-199. ISSN 1359-8368

Shamsuddoha, Md and Djukic, Luke P. and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan (2017) Mechanical and thermal properties of glass fibre-vinyl ester resin composite for pipeline repair exposed to hot-wet conditioning. Journal of Composite Materials, 51 (11). pp. 1605-1617. ISSN 0021-9983

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2017) Analysis of stress concentration factor for tensile characteristics of syntactic foam using finite element method. Journal of Research Updates in Polymer Science, 6 (1). pp. 21-32.

Benmokrane, Brahim and Mohamed, Hamdy M. and Manalo, Allan and Cousin, Patrice (2017) Evaluation of physical and durability characteristics of new headed glass fiber–reinforced polymer bars for concrete structures. Journal of Composites for Construction, 21 (2). pp. 1-12. ISSN 1090-0268

Benmokrane, Brahim and Ali, Ahmed H. and Mohamed, Hamdy M. and El-Safty, Adel and Manalo, Allan (2017) Laboratory assessment and durability performance of vinyl-ester, polyester, and epoxy glass-FRP bars for concrete structures. Composites Part B: Engineering, 114. pp. 163-174. ISSN 1359-8368

Khan, Kamran A. and Umer, Rehan (2017) Modeling the viscoelastic compaction response of 3D woven fabrics for liquid composite molding processes. Journal of Reinforced Plastics and Composites, 36 (18). pp. 1299-1315. ISSN 0731-6844

Manalo, Allan and Aravinthan, Thiru and Fam, Amir and Benmokrane, Brahim (2017) State-of-the-art review on FRP sandwich systems for lightweight civil infrastructure. Journal of Composites for Construction, 21 (1). pp. 1-16. ISSN 1090-0268

Zhang, Zuhua and Zhu, Yingcan ORCID: https://orcid.org/0000-0003-4087-0169 and Yang, Tao and Li, Liangfeng and Zhu, Huajun and Wang, Hao (2017) Conversion of local industrial wastes into greener cement through geopolymer technology: a case study of high-magnesium nickel slag. Journal of Cleaner Production, 141. pp. 463-471. ISSN 0959-6526

Gao, Shuai and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Rufford, Thomas E. and Zhu, Zhonghua (2017) The preparation of activated carbon discs from tar pitch and coal powder for adsorption of CO 2, CH 4 and N 2. Microporous and Mesoporous Materials, 238. pp. 19-26. ISSN 1387-1811

Qian, Mengbo and Sun, Yiqi and Xu, Xiaodong and Liu, Lina and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Yu, Youming and Wang, Hao and Qian, Jun (2017) 2D-alumina platelets enhance mechanical and abrasion properties of PA-612 via interfacial hydrogen-bond interactions. Chemical Engineering Journal, 308. pp. 760-771.

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 (2017) Behaviour of composite sandwich panels bonded with epoxy polymer matrix for railway sleepers. [Thesis (PhD/Research)]

Muttashar, Majid Dhahir (2017) Behaviour of multi-celled GFRP beam assembly with concrete infill: experimental and theoretical evaluations. [Thesis (PhD/Research)]

Salleh, Zulzamri (2017) Characterisation of syntactic foams for marine applications. [Thesis (PhD/Research)]

Rasappagari, Muni R. R. and Zhuge, Y. (2017) Developing towards best natural fibre composite for structural applications—a review. In: 24th Australasian Conference on the Mechanics of Structures and Materials: Advancements and Challenges (ACMSM24), 6-9 Dec 2016, Perth, Australia.

Khan, Belas Ahmed (2017) Development of antibacterial hemp hurd/poly(lactic acid) biocomposite for food packaging. [Thesis (PhD/Research)]

Khan, Ziaullah (2017) Experimental and numerical study on fracture behaviour of bamboo fibres reinforced epoxy composites. [Thesis (PhD/Research)]

Muttashar, Majid and Manalo, Allan and Karunasena, Warna and Lokuge, Weena ORCID: https://orcid.org/0000-0003-1370-1976 (2017) Flexural behaviour of multi-celled GFRP composite beams with concrete infill: experiment and theoretical analysis. Composite Structures, 159. pp. 21-33. ISSN 0263-8223

Liu, Shan (2017) Preparation of activated carbon from biomass and its application in gas adsorption. [Thesis (PhD/Research)]

Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Xu, Zhiguang and Wu, Yuanpeng and Cheng, Qunfeng and Guo, Qipeng and Wang, Hao (2017) Super-tough artificial nacre based on graphene oxide via synergistic interface interactions of Pi-Pi stacking and hydrogen bonding. Carbon, 111. pp. 807-812. ISSN 0008-6223

Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Lin, Rijia and Wang, Li and Rufford, Thomas E. and Villacorta, Byron and Liu, Shaomin and Liu, Lian X. and Zhu, Zhonghua (2017) Surface-etched halloysite nanotubes in mixed matrix membranes for efficient gas separation. Separation and Purification Technology, 173. pp. 63-71. ISSN 1383-5866

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Su, Haibin (2017) Vinyl ester/glass microballoon syntactic foams with low density. International Research Journal of Materials Sciences and Applications, 2017 (1). pp. 1-25. ISSN 2575-1034

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Su, Haibin (2016) Mechanical properties of sandwich composite made of syntactic foam core and GFRP skins. AIMS Materials Science, 3 (4). pp. 1704-1727. ISSN 2372-0468

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2016) Determination of coefficient thermal expansion of glass microballoon/vinyl ester syntactic foams. In: 3rd Advanced Materials Conference (AMC 2016): Advanced Materials for Sustainability and Growth, 28-29 Nov 2016, Lagkawi, Malaysia.

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2016) Thermogravimetry analysis on fused borosilicate syntactic foams. In: 3rd Advanced Materials Conference (AMC 2016): Advanced Materials for Sustainability and Growth, 28-29 Nov 2016, Langkawi, Malaysia.

Matveev, M. Y. and Schubel, P. J. and Long, A. C. and Jones, I. A. (2016) Understanding the buckling behaviour of steered tows in automated dry fibre placement (ADFP). Composites Part A: Applied Science and Manufacturing, 90. pp. 451-456. ISSN 1359-835X

Manalo, Allan and Surendar, Swetha and van Erp, Gerard and Benmokrane, Brahim (2016) Flexural behavior of an FRP sandwich system with glass-fiber skins and a phenolic core at elevated in-service temperature. Composite Structures, 152. pp. 96-105. ISSN 0263-8223

Khan, Belas A. and Chevali, Venkata S. ORCID: https://orcid.org/0000-0002-5648-0344 and Na, Haining and Zhu, Jin and Warner, Philip and Wang, Hao (2016) Processing and properties of antibacterial silver nanoparticle-loaded hemp hurd/poly(lactic acid) biocomposites. Composites Part B: Engineering, 100. pp. 10-18. ISSN 1359-8368

Yan, Hongquiang and Sun, Chuang and Fang, Zhengping and Liu, Xiaoqing and Zhu, Jin and Wang, Hao (2016) Synthesis of an intrinsically flame retardant bio-based benzoxazine resin. Polymer, 97. pp. 418-427. ISSN 0032-3861

Zhang, Zuhua and Wang, Hao (2016) The pore characteristics of geopolymer foam concrete and their impact on the compressive strength and modulus. Frontiers in Materials, 3:38. pp. 1-11.

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Djukic, Luke P. (2016) Effect of hygrothermal conditioning on the mechanical and thermal properties of epoxy grouts for offshore pipeline rehabilitation. AIMS Materials Science, 3 (3). pp. 832-850. ISSN 2372-0468

Salleh, Z. and Islam, M. M. and Epaarachchi, J. A. (2016) Analysis of stress concentration factor around the hole of syntactic foam tensile specimens. International Journal of Advances in Science, Engineering and Technology, 4 (3). pp. 102-106. ISSN 2321-8991

Zhang, Zuhua and Provis, John L. and Zou, Jin and Reid, Andrew and Wang, Hao (2016) Toward an indexing approach to evaluate fly ashes for geopolymer manufacture. Cement and Concrete Research, 85. pp. 163-173. ISSN 0008-8846

Misnon, Mohd Iqbal and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Chen, Haizhen and Wang, Hao (2016) Woven hemp fabric reinforced vinyl ester composite treated with fire retardant. International Journal of Advances in Science Engineering and Technology, 4 (3). pp. 90-95. ISSN 2321-8991

Misnon, Mohd Iqbal and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Wang, Hao and Lau, Kin-tak (2016) Woven hemp fabric reinforced vinyl ester composite: effect of water absorption on the mechanical properties degradation. International Journal of Advances in Science, Engineering and Technology, 4 (3). pp. 96-101. ISSN 2321-8991

Sitinamaluwa, H. S. and Wang, M. C. and Will, G and Senadeera, W. and Zhang, S. and Yan, C. (2016) Lithium concentration dependent structure and mechanics of amorphous silicon. Journal of Applied Physics, 119 (24). pp. 1-6. ISSN 0021-8979

Zhang, Zuhua and Li, Liangfeng and Ma, Xue and Wang, Hao (2016) Compositional, microstructural and mechanical properties of ambient condition cured alkali-activated cement. Construction and Building Materials, 113. pp. 237-245. ISSN 0950-0618

Zhuang, Xiao Yu and Chen, Liang and Komarneni, Sridhar and Zhou, Chun Hui and Tong, Dong Shen and Yang, Hui Min and Yu, Wei Hua and Wang, Hao (2016) Fly ash-based geopolymer: clean production, properties and applications. Journal of Cleaner Production, 125. pp. 253-267. ISSN 0959-6526

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2016) Experimental and theoretical studies on the properties of injection moulded glass fibre reinforced mixed plastics composites. Composites Part A: Applied Science and Manufacturing, 84. pp. 393-405. ISSN 1359-835X

Kakei, Ayad Arab Ghaidan and Epaarachchi, Jayantha Ananda and Islam, M. Mainul and Leng, Jinsong (2016) Development of fracture and damage modeling concepts for composite materials. In: Structural health monitoring technologies and next-generation smart composite structures. Composite Materials: Analysis and Design. Taylor & Francis (CRC Press), Roca Raton, USA, pp. 341-368. ISBN 978-1-4822-2691-1

Epaarachchi, Jayantha Ananda and Kahandawa, Gayan Chanaka, eds. (2016) Structural health monitoring technologies and next-generation smart composite structures. Composite Materials: Analysis and Design. Taylor & Francis (CRC Press), Roca Raton, USA. ISBN 978-1-4822-2691-1

Zhang, Yan and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Liu, Hongzhi and Fu, Shenyuan (2016) Morphology, healing and mechanical performance of nanofibrillated cellulose reinforced poly(ε-caprolactone)/epoxy composites. Composites Science and Technology, 125. pp. 62-70. ISSN 0266-3538

Muttashar, Majid and Manalo, Allan and Karunasena, Warna and Lokuge, Weena ORCID: https://orcid.org/0000-0003-1370-1976 (2016) Influence of infill concrete strength on the flexural behaviour of pultruded GFRP square beams. Composite Structures, 145. pp. 58-67. ISSN 0263-8223

Manalo, Allan and Sirimanna, Chamila and Karunasena, Warna and McGarva, Lance and Falzon, Paul (2016) Pre-impregnated carbon fibre reinforced composite system for patch repair of steel I-beams. Construction and Building Materials, 105. pp. 365-376. ISSN 0950-0618

Al Azzawi, W. S. and Epaarachchi, Jayantha Ananda and Islam, M. Mainul and Leng, Jinsong (2016) Shape memory polymers and their applications. In: Structural health monitoring technologies and next-generation smart composite structures. Composite Materials: Analysis and Design. Taylor & Francis (CRC Press), Boca Raton, Florida, pp. 447-478. ISBN 978-1-4822-2691-1

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena ORCID: https://orcid.org/0000-0003-1370-1976 (2016) Influence of single and multiple skin-core debonding on free vibration characteristics of innovative GFRP sandwich panels. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 9 (5). pp. 800-804.

Etaati, Amir and Pather, Selvan and Cardona, Francisco and Wang, Hao (2016) Injection molded noil hemp fiber composites: interfacial shear strength, fiber strength, and aspect ratio. Polymer Composites, 37 (1). pp. 213-220. ISSN 0272-8397

Chevali, V. ORCID: https://orcid.org/0000-0002-5648-0344 and Kandare, E. (2016) Rigid biofoam composites as eco-efficient construction materials. In: Biopolymers and biotech admixtures for eco-efficient construction materials. Woodhead Publishing Series in Civil and Structural Engineering (63). Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 275-304. ISBN 978-0-08-100214-8

Li, Wenbin and Xu, Weilin and Wang, Hao and Wang, Xin (2016) A dynamic tester to evaluate the thermal and moisture behaviour of the surface of textiles. Journal of Thermal Biology, 55. pp. 14-19. ISSN 0306-4565

Zhang, Z. H. and Zhu, H. J. and Zhou, C. H. and Wang, H. (2016) Geopolymer from Kaolin in China: an overview. Applied Clay Science, 119 (1). pp. 31-41. ISSN 0169-1317

Muttashar, Majid and Karunasena, Warna and Manalo, Allan and Lokuge, Weena ORCID: https://orcid.org/0000-0003-1370-1976 (2016) Behaviour of hollow pultruded GFRP square beams with different shear span-to-depth ratios. Journal of Composite Materials, 50 (21). pp. 2925-2940. ISSN 0021-9983

Turner, P. and Liu, T. and Zeng, X. (2016) Collapse of 3D orthogonal woven carbon fibre composites under in-plane tension/compression and out-of-plane bending. Composite Structures, 142. pp. 286-297. ISSN 0263-8223

Zeng, Xuesen and Schubel, Peter and Lorrillard, Julien (2016) Modelling VARTM process induced variations on bending performance of composite Omega beams. Composites Part A, 90. pp. 371-379. ISSN 1359-835X

Shah, Darshil U. and Schubel, Peter J. (2016) On recycled carbon fibre composites manufactured through a liquid composite moulding process. Journal of Reinforced Plastics and Composites, 35 (7). pp. 533-540. ISSN 0731-6844

Li, Nannan and Yan, Hongqiang and Xia, Lei and Mao, Lebo and Fang, Zhengping and Song, Yihu and Wang, Hao (2015) Flame retarding and reinforcing modification of ramie/polybenzoxazine composites by surface treatment of ramie fabric. Composites Science and Technology, 121. pp. 82-88. ISSN 0266-3538

Fajrin, Jauhar and Zhuge, Yan (2015) Flexural behaviour of a sustainable hybrid composite panel using natural fibres. In: The 12th International Symposium on Fibre Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & The 5th Asia-Pacific Conference on Fibre Reinforced Polymers in Structures (APFIS-2015), 14-16 Dec 2015, Nanjing, China.

Muttashar, Majid and Karunasena, Warna and Manalo, Allan and Lokuge, Weena ORCID: https://orcid.org/0000-0003-1370-1976 (2015) Testing and characterization of pultruded glass fiber reinforced polymer (GFRP) beams. In: Joint Conference of the 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & the 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015), 14-16 Dec 2015, Nanjing, China.

Muttashar, Majid and Karunasena, Warna and Manalo, Allan and Lokuge, Weena ORCID: https://orcid.org/0000-0003-1370-1976 (2015) The effect of shear span-to-depth ratio on the failure mode and strength of pultruded GFRP beams. In: Joint Conference of the 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & the 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015), 14-16 Dec 2015, Nanjing, China.

Sirimanna, C. S. and Banerjee, S. ORCID: https://orcid.org/0000-0001-5446-5290 and Karunasena, W. and Manalo, A. C. and McGarva, L. (2015) Analysis of retrofitted corroded steel pipes using internally bonded FRP composite repair systems. Australian Journal of Structural Engineering, 16 (3). pp. 187-198. ISSN 1328-7982

Ho, Mei-po and Lau, Kin-tak and Wang, Hao and Hui, David (2015) Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles. Composites Part B: Engineering, 81. pp. 14-25. ISSN 1359-8368

Anjang, A. and Chevali, V. S. ORCID: https://orcid.org/0000-0002-5648-0344 and Lattimer, B. Y. and Case, S. W. and Feih, S. and Mouritz, A. P. (2015) Post-fire mechanical properties of sandwich composite structures. Composite Structures, 132. pp. 1019-1028. ISSN 0263-8223

Manalo, Allan C. and Wani, Evans and Zulkarnain, Noor Azwa and Karunasena, Warna and Lau, Kin-tak (2015) Effects of alkali treatment and elevated temperature on the mechanical properties of bamboo fibre-polyester composites. Composites Part B: Engineering, 80 (1). pp. 73-83. ISSN 1359-8368

Zhang, Yan and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Fu, Shenyuan and Chen, Fenghua (2015) Morphological structure and mechanical properties of epoxy/ polysulfone/cellulose nanofiber ternary nanocomposites. Composites Science and Technology, 115. pp. 66-71. ISSN 0266-3538

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2015) Improving the quality of experimental research in civil engineering by employing statistical design of experiment: a case study in developing composite hybrid sandwich panel. In: 14th International conference on QIR (Quality in Research), 10-13 Aug 2015, Lombok, Indonesia .

Wang, Xin and Zhao, Yuan and Li, Wenbin and Wang, Hao (2015) Effect of surface modifications on the thermal and moisture behavior of wool fabric. Applied Surface Science, 342. pp. 101-105. ISSN 0169-4332

Lin, Rijia and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Liu, Shaomin and Rudolph, Victor and Zhu, Zhonghua (2015) Mixed-matrix membranes with metal–organic framework-decorated CNT fillers for efficient CO2 separation. ACS Applied Materials & Interfaces, 7 (27). pp. 14750-14757. ISSN 1944-8244

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2015) Compressive behaviour of low density polymeric syntactic foams. Applied Mechanics and Materials, 799-800. pp. 135-139. ISSN 1660-9336

Sirimanna, C. S. and Manalo, A. C. and Karunasena, W. and Banerjee, S. ORCID: https://orcid.org/0000-0001-5446-5290 and McGarva, L. (2015) Fibre-reinforced polymer (FRP) repair systems for corroded steel pipelines. In: Rehabilitation of pipelines using fibre-reinforced polymer (FRP) composites. Woodhead Publishing Series in Civil and Structural Engineering (52). Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 267-285. ISBN 978-0-85709-684-5

Yang, Ying and Sitprasert, Chatcharin and Rufford, Thomas E. and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Shukla, Pradeep and Wang, Shaobin and Rudolph, Victor and Zhu, Zhonghua (2015) An experimental and simulation study of binary adsorption in metal–organic frameworks. Separation and Purification Technology, 146. pp. 136-142. ISSN 1383-5866

Bhat, T. and Chevali, Venkata ORCID: https://orcid.org/0000-0002-5648-0344 and Liu, X. and Feih, S. and Mouritz, A. (2015) Fire structural resistance of basalt fibre composite. Composites Part A: Applied Science and Manufacturing, 71. pp. 107-115. ISSN 1359-835X

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Khennane, Amar and Kayali, Obada (2015) Geopolymer concrete-filled pultruded composite beams: concrete mix design and application. Cement and Concrete Composites, 58. pp. 1-13. ISSN 0958-9465

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2015) Mechanical properties of low density glass microballoon/vinyl ester syntactic foam for marine application. In: 12th Composites Australia and CRC-ACS Conference 2015: Game On, 21-23 April 2015, Gold Coast, Australia.

Chevali, Venkata S. ORCID: https://orcid.org/0000-0002-5648-0344 and Nerenz, Brent A. and Ulven, Chad A. and Kandare, Everson (2015) Mechanical properties of hybrid lignocellulosic fiber-filled acrylonitrile butadiene styrene (ABS) biocomposites. Polymer-Plastics Technology and Engineering, 54 (4). pp. 375-382. ISSN 0360-2559

Zeng, Xuesen and Mooney, Sacha J. and Sturrock, Craig J. (2015) Assessing the effect of fibre extraction processes on the strength of flax fibre reinforcement. Composites Part A: Applied Science and Manufacturing, 70. pp. 1-7. ISSN 1359-835X

Epaarachchi, Jayantha and Canning, John and Leng, Jinsong and Lau, Alan and Mendis, Priyan, eds. (2015) Nano technology and smart sensors for structural health monitoring [Special issue of Structural Health Monitoring, Vol. 14, No. 2, March 2015]. Sage Publications, United Kingdom.

Misnon, M. I. and Islam, M. M. and Epaarachchi, J. A. and Lau, K. T. (2015) Analyses of woven hemp fabric characteristics for composite reinforcement. Materials and Design, 66 (A). pp. 82-92. ISSN 0264-1275

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2015) Impact location determination on thin laminated composite plates using an NIR-FBG sensor system. Measurement, 61. pp. 51-57. ISSN 0263-2241

Zhang, Z. and Wang, H. (2015) Alkali-activated cements for protective coating of OPC concrete. In: Handbook of alkali-activated cements, mortars and concretes. Woodhead Publishing Series in Civil and Structural Engineering, 54. Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 605-626. ISBN 978-1-78242-276-1

Zhang, Z. and Wang, H. (2015) Analysing the relation between pore structure and permeability of alkali-activated concrete binders. In: Handbook of alkali-activated cements, mortars and concretes. Woodhead Publishing Series in Civil and Structural Engineering, 54. Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 235-264. ISBN 978-1-78242-276-1

Bajracharya, Rohan Muni (2015) Behaviour of glass fibre reinforced recycled mixed plastic solid waste composites for civil engineering and construction applications. [Thesis (PhD/Research)]

Zeng, X. and Endruweit, A. and Long, A. C. (2015) Effect of specimen history on structure and in-plane permeability of woven fabrics. Journal of Composite Materials, 49 (13). pp. 1563-1578. ISSN 0021-9983

Wang, Hao and Schubel, Peter and Yi, Xiaosu and Zhu, Jin and Ulven, Chad and Qiu, Yiping (2015) Green composite materials [Editorial]. Advances in Materials Science and Engineering, 2015. ISSN 1687-8434

Etaati, Amir and Pather, Selvan and Rahman, Moloud and Wang, Hao (2015) Ground hemp fibers as filler/reinforcement for thermoplastic biocomposites. Advances in Materials Science and Engineering, 2015. ISSN 1687-8434

Etaati, Amir (2015) Injection moulded short hemp fibre polypropylene composites. [Thesis (PhD/Research)]

Banerjee, S. ORCID: https://orcid.org/0000-0001-5446-5290 and Lee, J. H. and Kuila, T. and Kim, N. H. (2015) Synthesis of graphene-based polymeric nanocomposites. In: Fillers and reinforcements for advanced nanocomposites. Woodhead Publishing Series in Composites Science and Engineering: (60). Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 133-155. ISBN 978-0-08-100079-3

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2014) Compressive properties of ceramic microballoon syntactic foams. In: 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014), 26-27 Dec 2014, Khulna, Bangladesh.

Misnon, Mohd Iqbal and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Lau, Kin-tak (2014) Selection of hemp fabric as reinforcement in composite materials. In: 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014), 26-27 Dec 2014, Khulna, Bangladesh.

Bajracharya, Rohan M. and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2014) Glass fibre and recycled mixed plastic wastes: recent developments and applications. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 09-12 Dec 2014, Byron Bay, Australia.

Shamsuddoha, M. and Islam, M. M. and Aravinthan, T. and Manalo, A. and Djukic, L. P. (2014) Compressive, tensile and thermal properties of epoxy grouts subjected to underwater conditioning at elevated temperature. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 9-12 Dec 2014, Byron Bay, Australia.

Guades, Ernesto and Aravinthan, Thiru and Islam, Md Mainul (2014) Characterisation of the mechanical properties of pultruded fibre-reinforced polymer tube. Materials and Design, 63. pp. 305-315. ISSN 0264-1275

Jayatilake, Indunil N. and Karunasena, Warna and Lokuge, Weena ORCID: https://orcid.org/0000-0003-1370-1976 (2014) Dynamic analysis of multilayer GFRP sandwich slabs with interlayer delaminations. In: 8th Australasian Congress on Applied Mechanics (ACAM 8), 24–28 Nov 2014, Melbourne, Australia.

Altamar, Rashed (2014) Fracture behaviour of fibre/polymer composites based on synthetic and natural fibres. [USQ Project]

Alqahtani, Rafi Ali (2014) Flexural properties of sisal fibre/epoxy Composites. [USQ Project]

Hatch, Daniel Roy (2014) Modal testing of existing supermarket floor systems and predictive finite element modelling for better design. [USQ Project]

Fairbanks-Smith, Michael S. (2014) Use of fibre-optic (FBG) sensors in the structural health monitoring of a battlefield helicopter rotor blade. [USQ Project]

Zhu, Huajun and Zhang, Zuhua and Zhu, Yingcan ORCID: https://orcid.org/0000-0003-4087-0169 and Tian, Liang (2014) Durability of alkali-activated fly ash concrete: chloride penetration in pastes and mortars. Construction and Building Materials, 65. pp. 51-59. ISSN 0950-0618

Manalo, Allan (2014) Structural behavior of fibre composite guardrails. In: 7th International Conference on FRP Composites in Civil Engineering (CICE 2014), 20-22 Aug 2014, Vancouver, Canada.

Aravinthan, Thiru (2014) Infrastructure failures and consequences: rehabilitation using fibre composites. In: 1st International Conference on Infrastructure Failures and Consequences (ICIFC 2014), 16-20 Jul 2014, Melbourne, Australia.

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Aravinthan, Thiru and Van Erp, Gerard (2014) Composite railway sleeper: a cost effective and eco-friendly alternative. In: IEEE Australia and New Zealand Student and Young Professional Congress (ANZSCON 2014), 3-5 Jul 2014, Brisbane, Australia.

Shelley, Tristan ORCID: https://orcid.org/0000-0002-4812-0285 and Liu, Xiaolin and Veidt, Martin and Heitzmann, Michael and Paton, Rowan (2014) Modelling squeeze flow of viscous polymer melts. In: 11th World Congress on Computational Mechanics (WCCM XI), 5th European Conference on Computational Mechanics (ECCM V), 6th European Conference on Computational Fluid Dynamics (ECFD VI), 20–25 July 2014, Barcelona, Spain.

Misnon, Mohd Iqbal and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Lau, Kin-tak (2014) Potentiality of utilising natural textile materials for engineering composites applications. Materials and Design, 59. pp. 359-368. ISSN 0264-1275

Anjang, A. and Chevali, V. S. ORCID: https://orcid.org/0000-0002-5648-0344 and Kandare, E. and Mouritz, A. P. and Feih, S. (2014) Tension modelling and testing of sandwich composites in fire. Composite Structures, 113. pp. 437-445. ISSN 0263-8223

Etaati, Amir and Pather, Selvan and Fang, Zhengping and Wang, Hao (2014) The study of fibre/matrix bond strength in short hemp polypropylene composites from dynamic mechanical analysis. Composites Part B: Engineering, 62. pp. 19-28. ISSN 1359-8368

Francucci, G. and Manthey, N. W. and Cardona, F. and Aravinthan, T. (2014) Processing and characterization of 100% hemp-based biocomposites obtained by vacuum infusion. Journal of Composite Materials, 48 (11). pp. 1323-1335. ISSN 0021-9983

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Khennane, Amar and Kayali, Obada (2014) Benefits of geopolymer concrete-filled FRP beams and its flexural behaviour. In: Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World, 7–9 Apr 2014, Newcastle, Australia.

Muttashar, Majid and Manalo, Allan and Karunasena, Warna and Lokuge, Weena ORCID: https://orcid.org/0000-0003-1370-1976 (2014) Flexural and axial behavior of pultruded GFRP hollow sections filled with low strength concrete. In: Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World, 7–9 Apr 2014, Newcastle, Australia.

Huang, Guobo and Wang, Shuqu and Song, Ping'An ORCID: https://orcid.org/0000-0003-1082-652X and Wu, Chenglin and Chen, Suqing and Wang, Xu (2014) Combination effect of carbon nanotubes with graphene on intumescent flame-retardant polypropylene nanocomposites. Composites Part A: Applied Science and Manufacturing, 59. pp. 18-25. ISSN 1359-835X

Zulkarnain, Azwa (2014) Moisture absorption and hydrothermal aging in bamboo fibre/polyester composite. In: Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World, 7–9 Apr 2014, Newcastle, Australia.

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Van Erp, Gerard (2014) Structural optimisation of composite railway sleeper. In: Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World, 7–9 Apr 2014, Newcastle, Australia.

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Al-Haddad, A. and Alotaibi, J. GH. and Yusaf, T. F. (2014) Design of film thickness instrument for fibre polymer composites tribological experiments. Journal of Engineering Science and Technology, 9 (2). pp. 154-166. ISSN 1823-4690

Etaati, Amir and Mehdizadeh, Saman Abdanan and Wang, Hao and Pather, Selvan (2014) Vibration damping characteristics of short hemp fibre thermoplastic composites. Journal of Reinforced Plastics and Composites, 33 (4). pp. 330-341. ISSN 0731-6844

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2014) A study into the characteristics of gomuti (Arenga pinnata) fibre for usage as natural fibre composites. Journal of Reinforced Plastics and Composites, 33 (2). pp. 179-192. ISSN 0731-6844

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-Tak (2014) Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts. Journal of Multifunctional Composites, 2 (1). pp. 61-66. ISSN 2168-4278

Zeng, Xuesen and Brown, Louise P. and Endruweit, Andreas and Matveev, Mikhail and Long, Andrew C. (2014) Geometrical modelling of 3D woven reinforcements for polymer composites: prediction of fabric permeability and composite mechanical properties. Composites Part A: Applied Science and Manufacturing, 56. pp. 150-160. ISSN 1359-835X

Salleh, Z. and Islam, M. M. and Ku, H. (2014) Study on compressive properties of syntactic foams for marine applications. Journal of Multifunctional Composites, 2 (1). pp. 21-27. ISSN 2168-4278

Hutchinson, J. R. and Schubel, P. J. and Said, R. (2014) A coupled structural and flow approach for numerical simulation of the light resin transfer moulding process. I: Model outline. Journal of Reinforced Plastics and Composites, 33 (14). pp. 1332-1338. ISSN 0731-6844

Hutchinson, J. R. and Schubel, P. J. (2014) A coupled structural and flow approach for numerical simulation of the light resin transfer moulding process. II: Fabric permeability and compaction characterisation, model results and a 6-kW wind turbine case study. Journal of Reinforced Plastics and Composites, 33 (13). pp. 1237-1257. ISSN 0731-6844

Low, Jim and Davies, Ian J. and Dong, Yu and Ahmed, Shaikh Faiz Uddin and Wang, Hao and Akil, Hazizan Md (2014) Advanced composites with natural reinforcement [Editorial]. Advances in Materials Science and Engineering, 2014. pp. 1-2. ISSN 1687-8434

Zulkarnain, Noor Azwa (2014) Degradability of bamboo fibre reinforced polyester composites. [Thesis (PhD/Research)]

Crossley, Richard and Schubel, Peter and Stevenson, Anthony (2014) Furan matrix and flax fibre as a sustainable renewable composite: mechanical and fire-resistant properties in comparison to phenol, epoxy and polyester. Journal of Reinforced Plastics and Composites, 33 (1). pp. 58-68. ISSN 0731-6844

Al-Saeed, Talal S. (2014) Machinability of natural fibre reinforced polymeric composites. [Thesis (PhD/Research)]

Salleh, Z. and Islam, M. M. and Yusop, M. Y. M. and Idrus, M. A. Munaim M. (2014) Mechanical properties of activated carbon (AC) coconut shell reinforced polypropylene composites encapsulated with epoxy resin. In: 5th International Conference on Chemical, Biological and Environmental Engineering (ICBEE 2013), 14-15 Sep 2013, New Delhi, India.

Shah, Darshil U. and Schubel, Peter J. and Clifford, Mike J. and Licence, Peter (2014) Mechanical property characterization of aligned plant yarn reinforced thermoset matrix composites manufactured via vacuum infusion. Polymer-Plastics Technology and Engineering, 53 (3). pp. 239-253. ISSN 0360-2559

Sirimanna, C. S. and Karunasena, W. and Manalo, A. C. and Banerjee, S. ORCID: https://orcid.org/0000-0001-5446-5290 and McGarva, L. (2013) Analysis of internal bonded fibre reinforced composite repair systems for corroded steel pipelines. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 Dec 2013, Melbourne, Australia.

Manalo, A. C. and Karunasena, W. and Sirimanna, C. and Maranan, G. (2013) Fibre composites pile rehabilitation and concrete formwork jacket: concept development and finite element analysis. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013): Towards Sustainable Infrastructure with FRP Composites, 11-13 Dec 2013, Melbourne, Australia.

Maranan, G. B. and Manalo, A. C. (2013) Investigation on the mechanical behavior of hybrid fibre reinforced polymer composite beam. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 December 2013, Melbourne, Australia.

Manalo, A. C. (2013) The effect of shear span-to-depth ratio and test set-up on the behavior of fibre composite sandwich structure. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013): Towards Sustainable Infrastructure with FRP Composites, 11-13 Dec 2013, Melbourne, Australia .

Salleh, Zulzamri and Islam, Md Mainul and Yusop, M. Y. M. and Muhamad, M. S. (2013) Tensile behaviours of activated carbon (AC) coconut shell reinforced recycle polyethylene (PET) hybrid composites. In: 12th International Conference on Frontiers of Polymers and Advanced Materials (ICFPAM 2013), 8-13 Dec 2013, Auckland, New Zealand.

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena ORCID: https://orcid.org/0000-0003-1370-1976 (2013) Dynamic behaviour of debonded GFRP composite beams. Journal of Multifunctional Composites, 1 (2). pp. 113-122. ISSN 2168-4278

Manalo, Allan (2013) Fibre reinforced polymer composites sandwich structure: Recent developments and applications in civil infrastructure. In: 2013 International Research Conference on Innovations in Engineering, Science and Technology (IRCIEST 2013), 27-29 Nov 2013, Batangas State University, Batangas, Philippines.

Wang, Hao and Lau, Alan K.T. (2013) Hemp and hemp-based composites. In: Green composites from natural resources. Taylor & Francis (CRC Press), Boca Raton, FL. United States, pp. 63-94. ISBN 978-1-4665-7069-6

Griinke, Tyler John (2013) Development of an artificial neural network (ANN) for predicting tribological properties of kenaf fibre reinforced epoxy composites (KFRE). [USQ Project]

Alawad, Aziz (2013) Response surface methodology. [USQ Project]

Birch, Byrenn James Colin ORCID: https://orcid.org/0000-0003-0625-2455 (2013) Simulation of fibre Bragg grating (FBG) reflection spectrums using OptiGrating. [USQ Project]

Janse van Rensburg, Barnard (2013) The development of a light weight composite conveyor belt idler roller. [USQ Project]

Manthey, Nathan W. and Cardona, Francisco and Francucci, Gaston and Aravinthan, Thiru (2013) Thermo-mechanical properties of epoxidized hemp oil-based bioresins and biocomposites. Journal of Reinforced Plastics and Composites , 32 (19). pp. 1444-1456. ISSN 0731-6844

Manalo, A. and Maranan, G. and Erp, G. V. (2013) Glue-laminated composite sandwich beams for structural engineering and construction. In: 13th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC13), 11-13 Sep 2013, Sapporro, Japan.

Shah, Darshil U. and Schubel, Peter J. and Clifford, Mike J. (2013) Can flax replace E-glass in structural composites? A small wind turbine blade case study. Composites Part B: Engineering, 52. pp. 172-181. ISSN 1359-8368

Crossley, R. J. and Schubel, P. J. and De Focatiis, D. S. A. (2013) Time-temperature equivalence in the tack and dynamic stiffness of polymer prepreg and its application to automated composites manufacturing. Composites Part A: Applied Science and Manufacturing, 52. pp. 126-133. ISSN 1359-835X

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2013) Effect of eccentricity on the behavior of pultruded FRP bolted joint. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Salleh, Z. and Islam, M. M. and Ku, H. (2013) Tensile behaviours of activated carbon coconut shell filled epoxy composites. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Misnon, M. I. and Islam, M. M. and Epaarachchi, J. and Lau, K. T. (2013) Textile material forms for reinforcement materials: a review. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Azwa, Z. N. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2013) Thermal degredation study of kenaf fibre/epoxy composites using thermo gravimetric analysis. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2013) Wave propogation scattering due to defect on thin composite plates. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Salleh, Z. and Islam, M. M. and Ku, H. (2013) Preliminary study on the development of syntactic foams for marine applications. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2013) Smart structure for small wind turbine blade. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Ku, H. and Trada, Mohan (2013) Tensile properties of nanoclay reinforced epoxy composites. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Chen, Ling and Tang, Chak Yin and Ku, Harry Siu Lung and Chen, Da Zhu and Tsui, Chi Pong (2013) Surface coating of poly-D-L-lactide/nano-hydroxyapatite composite scaffolds for dexamethasone-releasing function and wettability enhancement. In: Materials Science and Technology Conference (MS&T 2012): Next Generation Biomaterials and Surface Properties of Biomaterials , 27-31 Oct 2012, Pittsburgh, PA. United States.

Etaati, A. and Wang, H. and Pather, S. and Yan, Z. and Mehdizadeh, S. Abdanan (2013) 3D X-ray microtomography study on fibre breakage in noil hemp fibre reinforced polypropylene composites. Composites Part B: Engineering, 50. pp. 239-246. ISSN 1359-8368

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2013) An investigation of acoustic emission signal attenuation for monitoring of progressive failure in fiberglass reinforced composite laminates. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1442-1456. ISSN 2229-8649

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. (2013) Effects of chemical treatments on hemp fibre structure. Applied Surface Science , 276. pp. 13-23. ISSN 0169-4332

Albdiry, Mushtaq T. and Yousif, Belal F. ORCID: https://orcid.org/0000-0003-3847-5469 and Ku, Harry (2013) Fracture toughness and toughening mechanisms of unsaturated polyester-based clay nanocomposites. In: 13th International Conference on Fracture (ICF 2013), 16-21 Jun 2013, Beijing, China.

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2013) Mechanical properties characterization of the skin and core of a novel composite sandwich structure. Journal of Composite Materials, 47 (14). pp. 1785-1800. ISSN 0021-9983

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak (2013) Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs. Composite Structures, 100. pp. 40-54. ISSN 0263-8223

Shalwan, A. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2013) In state of art: mechanical and tribological behaviour of polymeric composites based on natural fibres. Materials and Design, 48. pp. 14-24. ISSN 0264-1275

Manalo, A. C. (2013) Behaviour of fibre composite sandwich structures under short and asymmetrical beam shear tests. Composite Structures, 99. pp. 339-349. ISSN 0263-8223

Ku, H. and Epaarachchi, J. and Trada, M. and Wong, P. (2013) Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves. Journal of Reinforced Plastics and Composites, 32 (10). pp. 689-699. ISSN 0731-6844

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. and Followell, D. and Birt, P. (2013) Use of fixed wavelength Fibre-Bragg Grating (FBG) filters to capture time domain data from the distorted spectrum of an embedded FBG sensor to estimate strain with an artificial neural network. Sensors and Actuators A: Physical, 194. pp. 1-7. ISSN 0924-4247

Wang, Hao and Kabir, Mazed and Lau, K. T. (2013) Chemical treatments on hemp fibre composites. In: Fiber Society Spring 2013 Technical Conference (FS 2013): Advancing Scientific Knowledge Pertaining to Fibers and Fibrous Materials, 22-24 May 2013, Geelong, Australia.

Ku, H. and Trada, M. and Tai, P. (2013) Dielectric properties of sawdust reinforced epoxy composites post-cured in microwaves. Journal of Reinforced Plastics and Composites, 32 (10). pp. 765-774. ISSN 0731-6844

Albdiry, M. T. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Ku, H. and Lau, K. T. (2013) A critical review on the manufacturing processes in relation to the properties of nanoclay/polymer composites. Journal of Composite Materials, 47 (9). pp. 1093-1115. ISSN 0021-9983

Kahandawa, Gayan C. and Epaarachchi, Jayantha and Lau, K. T. and Canning, John (2013) Estimation of strain of distorted FBG sensor spectra using a fixed FBG filter circuit and an artificial neural network. In: IEEE 8th International Conference on Intelligent Sensors, Sensor Networks and Information Processing (ISSNIP 2013): Sensing the Future, 2-5 Apr 2013, Melbourne, Australia.

Manalo, Allan (2013) Structural behaviour of a prefabricated composite wall system made from rigid polyurethane foam and magnesium oxide board. Construction and Building Materials, 41. pp. 642-653. ISSN 0950-0618

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Manalo, Allan (2013) Geometry and restraint effects on the bending behaviour of the glass fibre reinforced polymer sandwich slabs under point load. Materials and Design, 45. pp. 125-134. ISSN 0264-1275

Schubel, P. J. and Crossley, R. J. and Boateng, E. K. G. and Hutchinson, J. R. (2013) Review of structural health and cure monitoring techniques for large wind turbine blades. Renewable Energy, 51. pp. 113-123. ISSN 0960-1481

Fuqua, Michael A. and Chevali, Venkata S. ORCID: https://orcid.org/0000-0002-5648-0344 and Ulven, Chad A. (2013) Lignocellulosic byproducts as filler in polypropylene: comprehensive study on the effects of compatibilization and loading. Journal of Applied Polymer Science, 127 (2). pp. 862-868. ISSN 0021-8995

Ku, H. and Fung, S. Y. and Islam, M. and Li, X. and Chong, Y. P. (2013) A pilot study on flexural properties of epoxy nanoclay reinforced composites. Journal of Reinforced Plastics and Composites, 32 (2). pp. 96-104. ISSN 0731-6844

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2013) A review on the characteristics of gomuti fibre and its composites with thermoset resins. Journal of Reinforced Plastics and Composites, 32 (2). pp. 124-136. ISSN 0731-6844

Arhaim, Y. H and Shalwan, A. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2013) Correlation between frictional force, interface temperature and specific wear rate of fibre polymer composites. International Conference on Advanced Materials Research, 685 (685). pp. 45-49.

Alsaeed, T. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Ku, H. (2013) The potential of using date palm fibres as reinforcement for polymeric composites. Materials and Design, 43. pp. 177-184. ISSN 0264-1275

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2013) A review of FRP composite truss systems and its connection. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22): Materials to Structures: Advancement through Innovation , 11-14 Dec 2012, Sydney, Australia.

Shelley, T. J. ORCID: https://orcid.org/0000-0002-4812-0285 and Liew, C. K. (2013) Application of wavelet parameters for impact damage detection in plates. Key Engineering Materials, 558. pp. 12-24. ISSN 1013-9826

Ticoalu, Adriana (2013) Characteristics and behaviour of gomuti fibre composites with thermoset resin. [Thesis (PhD/Research)]

Manthey, Nathan William (2013) Development of hemp oil based bioresins for biocomposites. [Thesis (PhD/Research)]

Shah, Darshil U. and Schubel, Peter J. and Clifford, Mike J. and Licence, Peter (2013) Fatigue life evaluation of aligned plant fibre composites through S-N curves and constant-life diagrams. Composites Science and Technology, 74. pp. 139-149. ISSN 0266-3538

Yan, Z. L. and Ma, T. and Zhang, J. C. and Zhang, H. and Wang, H. (2013) Hemp hurd based carbon template for reaction formed silicon carbide ceramic. In: 19th International Conference on Composite Materials (ICCM19): Composite Materials: The Great Advance, 28 Jul-2 Aug 2013, Montreal, Canada.

Kabir, Mohammad Mazedul and Islam, Md Mainul and Wang, Hao (2013) Mechanical and thermal properties of jute fibre reinforced composites. Journal of Multifunctional Composites, 1 (1). pp. 71-77. ISSN 2168-4278

Manalo, A. C. and Karunasena, W. and Lau, K. T. (2013) Mechanical properties of bamboo fiber-polyester composites. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Shamsuddoha, M. and Islam, M. M. and Aravinthan, T. and Manalo, A. C. and Lau, K. T. (2013) Mechanical properties of epoxy grouts for structural repair. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Hafizi, Mohd Zohari and Epaarachchi, Jayantha Ananda and Lau, K. T. (2013) Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test. Structural Health Monitoring: Research and Applications, 558 (558). pp. 65-75. ISSN 1013-9826

Albdiry, M. T. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2013) Morphological structures and tribological performance of unsaturated polyester based untreated/silane-treated halloysite nanotubes. Materials and Design, 48. pp. 68-76. ISSN 0264-1275

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2013) Multi-objective design optimisation of GFRP sandwich beams. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2013) Properties and behaviour of gomuti fibre composites under tensile and compressive load. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Yousif, Belal F. ORCID: https://orcid.org/0000-0003-3847-5469 and Islam, Md Mainul and Salit, Mohd Sapuan (2013) Sustainable composites [Editorial]. Advances in Materials Science and Engineering. ISSN 1687-8434

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of full-scale railway turnout sleepers from glue-laminated fibre composite sandwich structures. Journal of Composites for Construction, 16 (6). pp. 724-736. ISSN 1090-0268

Kahandawa, G. C. and Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) Detecting delamination in a composite structure using an embedded FBG-AE hybrid system. In: 7th Australasian Congress on Applied Mechanics (ACAM 2012), 9-12 Dec 2012, Adelaide, Australia.

Ku, H. and Yap, Y. S. and Lee, T. S. and Trada, M. (2012) Tensile properties of phenol-formaldehyde nanoclay reinforced composites: a pilot study. Journal of Applied Polymer Science, 126 (s2). E142-E150. ISSN 0021-8995

Aravinthan, T. (2012) Composites in civil infrastructure: R & D to applications. In: 6th International Composites Conference (ACUN 6): Composites and Nanocomposites in Civil, Offshore and Mining Infrastructure , 14-16 Nov 2012, Melbourne, Australia.

Manalo, A. C. (2012) Recent developments on fibre composite sandwich structures in civil infrastructure. In: 6th International Composites Conference (ACUN 6): Composite and Nanocomposites in Civil, Offshore and Mining Infrastructure, 14-16 Nov 2012, Melbourne, Australia.

Falzon, P. J. and Leong, K. H. and McGarva, L. and Leong, Y. L. and Manalo, A. and Virk, A. and Leipnik, D. and Djukic, L. (2012) Development and assessment of a carbon fibre reinforced composite repair system. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2012) Development of smart wind turbine blades. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. and Lau, K. T. (2012) Optimized FBG sensor network for efficient detection of a delamination in FRP structures. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Yan, Z. L. and Wang, H. and Lau, K. T. and Zhang, J. C. and Zhang, H. and Ding, Y. (2012) Fabrication process optimization of hemp fibre reinforced polypropylene composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Ho, M. P. and Wang, H. and Lau, K. T. and Jayaraman, K. and Bhattacharyya, D. (2012) Mechanical properties of a bamboo charcoal reinforced polylactic acid composite. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Trada, M. and Mandava, J. and Ku, H. and Yousif, B. ORCID: https://orcid.org/0000-0003-3847-5469 (2012) Tensile properties of bagasse reinforced epoxy composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Shah, Darshil U. and Schubel, Peter J. and Licence, Peter and Clifford, Mike J. (2012) Determining the minimum, critical and maximum fibre content for twisted yarn reinforced plant fibre composites. Composites Science and Technology, 72 (15). pp. 1909-1917. ISSN 0266-3538

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2012) New concept for optimal application of natural fibre reinforced plastic (NFRP) in building construction. In: 8th Asia Pacific Structural Engineering and Construction Conference and 1st International Conference on Civil Engineering Research (APSEC-ICCER 2012): Sustaining the World with Better Structures and Construction Practice, 2-4 Oct 2012, Surabaya, Indonesia.

Manthey, Nathan W. and Cardona, Francisco and Francucci, Gaston M. and Aravinthan, Thiru (2012) Green building materials: hemp oil based biocomposites. In: 2012 World Academy of Science, Engineering and Technology Conference (WASET 2012), 24-25 Oct 2012, Bali, Indonesia.

Schubel, P. J. and Crossley, R. J. (2012) Wind turbine blade design. Energies, 5 (9). pp. 3425-3449.

Supeni, Eris Elianddy (2012) Design and analysis of a smart composite beam for small wind turbine blade construction. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Hafizi, Z. M. (2012) Source mapping of thin composite laminates using integrated FBG sensors in acoustic emission system: near infrared FBG approach. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Kabir, Mohammad Mazedul (2012) Effects of chemical treatments on hemp fibre reinforced polyester composites. [Thesis (PhD/Research)]

Easton, Mark A. and Wang, Hao and Grandfield, John and Davidson, Cameron J. and StJohn, David H. and Sweet, Lisa D. and Couper, Malcolm J. (2012) Observation and prediction of the hot tear susceptibility of ternary Al-Si-Mg alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science , 43 (9). pp. 3227-3238. ISSN 1073-5623

Shah, Darshil U. and Schubel, Peter J. and Clifford, Mike J. and Licence, Peter (2012) The tensile behaviour of off-axis plant fibre composites: an insight on the non-linear stress-strain response. Polymer Composites, 33 (9). pp. 1494-1504. ISSN 0272-8397

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) Modal analysis of high frequency acoustic signal approach for progressive failure monitoring in thin composite plates. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of glued fibre composite sandwich structure in flexure: experiment and fibre model analysis. Materials and Design, 39. pp. 458-468. ISSN 0264-1275

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2012) Experimental and numerical analysis of an innovative GFRP sandwich floor panel under point load. Engineering Structures, 41. pp. 126-135. ISSN 0141-0296

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) An experimental investigation of early damage localization for thin glass fibre reinforced symmetric composite laminates. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

Alsaeed, T. and Alajmi, A. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Ku, H. and Lau, Alan Kin-tak (2012) Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2012) Design of smart structures for wind turbine blades. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Nirmal, Umar and Hashim, Jamil and Lau, Saijod T. W. and Yuhazri, M. Y. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2012) Betelnut fibres as an alternative to glass fibres to reinforce thermoset composites: a comparative study. Textile Research Journal, 82 (11). pp. 1107-1120. ISSN 0040-5175

Ku, Harry S. (2012) Processing of materials using electromagnetic fields. In: Wiley encyclopedia of composites, 2nd ed. John Wiley & Sons, Inc., Hoboken, NJ. United States, pp. 2487-2500. ISBN 978-0-470-12828-2

Lau, Alan K. T. (2012) Natural composites for bettering the environment [Keynote]. In: BIT's 1st Annual World Congress of Advanced Materials (WCAM 2012):Innovation, Cutting-Edge, and Smartness , 6-8 Jun 2012, Beijing, China.

Cardona, Francisco (2012) Bio-resins: new structural renewable materials for bio-composite applications. In: 4th KKU International Engineering Conference: Driving Together Towards ASEAN Economic Community (KKU-IENC 2012) , 10-12 May 2012, Khon Kaen University, Thailand.

Manalo, A. C. and Aravinthan, T. and Mutsuyoshi, H. and Matsui, T. (2012) Composite behaviour of a hybrid FRP bridge girder and concrete deck. Advances in Structural Engineering, 15 (4). pp. 589-600. ISSN 1369-4332

Schubel, P. J. (2012) Cost modelling in polymer composite applications: case study – analysis of existing and automated manufacturing processes for a large wind turbine blade. Composites Part B: Engineering, 43 (3). pp. 953-960. ISSN 1359-8368

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Ku, H. (2012) Suitability of using coir fiber/polymeric composite for the design of liquid storage tanks. Materials and Design, 36. pp. 847-853. ISSN 0264-1275

Shah, Darshil U. and Schubel, Peter J. and Clifford, Mike J. (2012) Modelling the effect of yarn twist on the tensile strength of unidirectional plant fibre yarn composites. Journal of Composite Materials, 47 (4). pp. 425-436. ISSN 0021-9983

Ho, Mei-po and Lau, Kin-tak (2012) Design of an impact resistant glass fibre/epoxy composites using short silk fibres. Materials and Design, 35 (1). pp. 664-669. ISSN 0261-3069

Shah, Darshil U. and Schubel, Peter J. and Licence, Peter and Clifford, Mike J. (2012) Hydroxyethylcellulose surface treatment of natural fibres: the new 'twist' in yarn preparation and optimization for composites applicability. Journal of Materials Science, 47 (6). pp. 2700-2711. ISSN 0022-2461

Wong, Kwok Yeung Peter (2012) Measurement of mechanical, electrical and thermal properties of glass powder reinforced epoxy composites and modelling. [Thesis (PhD/Research)]

Crossley, R. J. and Schubel, P. J. and Warrior, N. A. (2012) The experimental determination of prepreg tack and dynamic stiffness. Composites Part A: Applied Science and Manufacturing, 43 (3). pp. 423-434. ISSN 1359-835X

Manalo, Allan C. and Aravinthan, Thiru (2012) Mechanical behaviour of a new type of fibre composite railway sleeper. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Karu (2012) Prediction of the flexural behavior of fibre composite sandwich beams. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Aravinthan, Thiru (2012) Research and development of fibre composites in civil infrastructure - the Australian experience [Keynote address]. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Tang, Xue‐Gang and Hou, Meng and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Zou, Jin and Truss, Rowan and Yang, Wei and Yang, Ming‐Bo and Zhu, Zhong-Hua and Bao, Rui‐Ying (2012) The preparation, structures, and properties of poly (vinylidene fluoride)/multiwall carbon nanotubes nanocomposites. Journal of Applied Polymer Science, 125 (S1). E592-E600. ISSN 0021-8995

Chevali, Venkata S. ORCID: https://orcid.org/0000-0002-5648-0344 and Nerenz, Brent A. and Ulven, Chad A. (2012) Acrylonitrile butadiene styrene (ABS)/lignocellulosic fiber biocomposite: Effect of artificial weathering on impact properties. Journal of Biobased Materials and Bioenergy, 6 (1). pp. 42-50. ISSN 1556-6560

Yousif, Belal F. ORCID: https://orcid.org/0000-0003-3847-5469 (2012) Adhesive wear characteristics of natural fiber-reinforced composites. In: Wear of advanced materials. John Wiley & Sons, Inc., London, United Kingdom, pp. 61-97. ISBN 978-1-84821-352-4

Manalo, Allan and Mutsuyoshi, Hiroshi (2012) Behavior of fiber-reinforced composite beams with mechanical joints. Journal of Composite Materials, 46 (4). pp. 483-496. ISSN 0021-9983

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak and Elder, David (2012) Fibre composites for high pressure pipeline repairs, in-air and subsea: an overview. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012) , 2-4 Feb 2012, Sapporo, Japan.

Cardona, Francisco and Lau, Alan Kin-Tak and Fedrigo, Jessica (2012) Novel phenolic resins with improved mechanical and toughness properties. Journal of Applied Polymer Science, 123 (4). pp. 2131-2139. ISSN 0021-8995

Ho, Mei-Po (2012) Strengthening mechanism and bio-degradability of a silk-based polymer composite. [Thesis (PhD/Research)]

Awad, Ziad K. and Yusaf, Talal (2012) Fibre composite railway sleeper design by using FE approach and optimization techniques. Structural Engineering and Mechanics, 41 (2). pp. 231-242. ISSN 1225-4568

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2012) A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials and Design, 33 (1). pp. 534-544. ISSN 0264-1275

Ku, H. and Wong, P. (2012) Contrast on tensile and flexural properties of glass powder reinforced epoxy composites: pilot study. Journal of Applied Polymer Science, 123 (1). pp. 152-161. ISSN 0021-8995

Nerenz, Brent A. and Fuqua, Michael A. and Chevali, Venkata S. ORCID: https://orcid.org/0000-0002-5648-0344 and Ulven, Chad A. (2012) Processing and characterization of a polypropylene biocomposite compounded with maleated and acrylated compatibilizers. International Journal of Polymer Science, 2012:472078. pp. 1-7. ISSN 1687-9422

Islam, Md Mainul and Kim, Ho Sung (2012) Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior. Journal of Sandwich Structures and Materials, 14 (1). pp. 111-127. ISSN 1099-6362

Kabir, Mohammad Mazedul and Wang, Hao and Lau, Alan and Cardona, Francisco and Aravinthan, Thiru (2012) Compressive properties of chemically-treated hemp fibre reinforced composites. In: Composites Australia and CRC-ACS, 2012 Conference: Diversity in Composite, 15-16 Mar 2012, Leura, Australia.

Sirimanna, Chamila Sampath and Lokuge, Weena ORCID: https://orcid.org/0000-0003-1370-1976 and Islam, Md Mainul and Aravinthan, Thiru (2012) Compressive strength characterization of polyester based fillers. Processing and Fabrication of Advanced Materials. pp. 32-35. ISSN 1022-6680

Choy, Y. S. and Liu, Y. and Lau, K. T. (2012) Duct noise control by using very light composite plate. Advanced Materials Research, 410. pp. 361-365. ISSN 1022-6680

Ho, Mei-po and Wang, Hao and Lau, Kin-tak (2012) Effect of degumming time on silkworm silk fibre for biodegradable polymer composites. Applied Surface Science, 258 (8). pp. 3948-3955. ISSN 0169-4332

Chevali, Venkata S. ORCID: https://orcid.org/0000-0002-5648-0344 and Ulven, Chad A. (2012) Effect of extrusion screw speed on biocomposite thermo-mechanical properties. International Journal of Sustainable Engineering, 5 (1). pp. 38-46. ISSN 1939-7038

Ku, H. and Wong, P. and Huang, J. and Fung, H. and Trada, M. (2012) Flexural properties of epoxy composites filled with glass powder: preliminary results. Advanced Material Research, 410. pp. 309-312. ISSN 1022-6680

Ku, H. and Donald, M. and Cardona, F. and Trada, M. (2012) Flexural properties of sawdust-reinforced epoxy composites post-cured in microwaves. Journal of Composite Materials, 46 (22). pp. 2879-2890. ISSN 0021-9983

Ku, H. and Prajapati, M. and Trada, M. (2012) Fracture toughness of vinyl ester composites reinforced with sawdust and postcured in microwaves. International Journal of Microwave Science and Technology, 2012 (152726). pp. 1-8. ISSN 1687-5826

Ku, H. and Zhou, Hong and Wong, Peter and Su, Gang and Vadher, Jayent (2012) Modeling the flexural properties of SLG reinforced phenol formaldehyde composites using Langrage’s Method. Advanced Materials Research, 410. pp. 305-308. ISSN 1022-6680

Awad, Ziad Khalaf (2012) Novel fibre composite civil engineering sandwich structures: behaviour, analysis, and optimum design. [Thesis (PhD/Research)]

Cardona, Francisco and Tawfik, Qaidar H. and Karunasena, Karu (2012) Reinforcement of corroded steel structures with CFRP panels. In: ICACE 2012: International Conference on Architectural and Civil Engineering, 24-25 Oct 2012, Bali, Indonesia.

Ahmed, Mansur and Islam, Md Saiful and Ahsan, Qumrul and Islam, Md Mainul (2012) Silk fibers and their unidirectional polymer composites. In: Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Advances in Materials Science (2). Apple Academic Press (CRC Press), Oakville, ON. Canada , pp. 79-90. ISBN 978-1-926895-16-1

Albdiry, M. T. and Almosawi, A. I. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2012) The synergistic effect of hybrid flame retardants on pyrolysis behaviour of hybrid composite materials. Journal of Engineering Science and Technology, 7 (3). pp. 351-359. ISSN 1823-4690

Ho, Mei-po and Wang, Hao and Lau, Kin-tak (2012) Thermal properties and structure conformation on silkworm silk fibre. In: Composites Australia and CRC-ACS, 2012 Conference: Diversity in Composite, 15-16 Mar 2012, Leura, Australia.

Nirmal, Umar and Hashim, Jamil and Rilling, Dirk and Brevern, P. V. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2012) Tribo performance of T-BFRP composite subjected to dry/wet contact conditions. In: Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Advances in Materials Science (2). Apple Academic Press (CRC Press), Toronto, Canada, pp. 311-325. ISBN 978-1-9268-9516-1

Schubel, P. J. and Crossley, R. J. (2012) Wind turbine blade design review. Wind Engineering, 36 (4). pp. 365-388. ISSN 0309-524X

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2011) Flexural strength of sandwich panel with lignocellulosic composites intermediate layer: a statistic approach. International Journal of Protective Structures, 2 (4). pp. 453-464. ISSN 2041-4196

Cardona, F. and Fedrigo, J. (2011) Synthesis of elastomeric phenolic resins with improved toughness and flexibility. In: EUROTEC 2011: Inaugural European Technical Conference on Plastics, 14-15 Nov 2011, Barcelona, Spain.

Chan, Mo-lin and Lau, Kin-tak and Wong, T. T. and Cardona, Francisco (2011) Interfacial bonding characteristic of nanoclay/polymer composites. Applied Surface Science, 258 (2). pp. 860-864. ISSN 0169-4332

Mandava, Jagan (2011) Mechanical behaviour of polymeric composition based on available natural fibres in Australia. [USQ Project]

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Nirmal, Umar (2011) Wear and frictional performance of polymeric composites aged in various solutions. Wear, 272 (1). pp. 97-104. ISSN 0043-1648

Bolt, Jason and Zhuge, Yan and Bullen, Frank (2011) The effect of titanium dioxide addition on the hydraulic and mechanical properties of permeable concrete. In: 25th Biennial Conference of the Concrete Institute of Australia (Concrete 2011): Building a Sustainable Future, 12-14 Oct 2011, Perth, Australia.

Tomkins, Brock William (2011) Chemical resistance of geopolymer concrete against H2SO4 & NaOH. [USQ Project]

Brown, Steven (2011) Design of a high-shear geopolymer concrete mixer. [USQ Project]

Mautoga, Marau (2011) Fracture toughness of glass powder reinforced vinyl ester resin post cured in a conventional oven using flexural test. [USQ Project]

Peauril, Joshua (2011) Recycling glass fibre composites – process and viability. [USQ Project]

Kilian, Simone (2011) Sugarcane bagasse reinforced thermoplastic composites. [USQ Project]

Chevali, Venkata ORCID: https://orcid.org/0000-0002-5648-0344 and Fuqua, Michael and Ulven, Chad A. (2011) Vegetable oil based rigid foam composites. In: Handbook of bioplastics and biocomposites engineering applications. John Wiley and Scrivener Publishing LLC, United States, pp. 269-283. ISBN 978-047062607-8

Singh, Narish and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Rilling, Dirk (2011) Tribological characteristics of sustainable fibre reinforced thermoplastic composites under wet adhesive wear. Tribology Transactions, 54 (5). pp. 736-748. ISSN 1040-2004

Malvern, J. L. and Epaarachchi, J. A. and Lau, K. T. (2011) Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions. In: 18th International Conference on Composite Materials (ICCM-18), 21-26 Aug 2011, Jeju Island, South Korea.

Lau, Alan K. T. and Ho, Mabel M. P. (2011) Recent research trend in natural-fibre composites. JEC Composites (67). pp. 50-52. ISSN 1639-965X

Wang, H. and Kabir, M. M. and Lau, K. T. (2011) The effect of fibre chemical treatments on hemp reinforced composites. In: 18th International Conference on Composite Materials (ICCM 2011), 21-26 Aug 2011, Jeju Island, Korea.

Manalo, Allan C. and Aravinthan, Thiru (2011) Flexural behaviour of glulam beams from novel sandwich panels. In: 16th International Conference on Composite Structures (ICCS 16), 28-30 July 2011, Porto, Portugal.

Kim, M. T. and Rhee, K. Y. and Lee, J. H. and Hui, D. and Lau, Alan K. T. (2011) Property enhancement of a carbon fiber/epoxy composite by using carbon nanotubes. Composites Part B: Engineering , 42 (5). pp. 1257-1261. ISSN 1359-8368

Ku, H. and Wang, H. and Pattarachaiyakoop, N. and Trada, M. (2011) A review on the tensile properties of natural fiber reinforced polymer composites. Composites Part B: Engineering, 42 (4). pp. 856-873. ISSN 1359-8368

Ku, H. and Prajapati, M. and Cardona, F. (2011) Thermal properties of sawdust reinforced vinyl ester composites post-cured in microwaves: a pilot study. Composites Part B: Engineering, 42 (4). pp. 898-906. ISSN 1359-8368

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2011) The implementation of statistical inference to study the bending strength of sustainable hybrid sandwich panel composite. Advanced Material Research, 250-253. pp. 956-961.

Manthey, N. W. and Cardona, F. and Aravinthan, T. (2011) Mechanical properties of epoxidized hemp oil based biocomposites: preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27 -29 Apr 2011, Brisbane, Australia.

Manalo, A. C. and Aravinthan, T. (2011) The effects of fibre wraps on the flexural behaviour of glulam composite sandwich beams. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011), 27-29 Apr 2011, Brisbane, Australia.

Schubel, P. (2011) Cost analysis in using non-crimp fabric composites in engineering applications. In: Non-crimp fabric composites: manufacturing, properties and applications. Woodhead Publishing Limited, United Kingdom, pp. 494-510. ISBN 9781845697624

Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Zhu, Zhonghua and Li, Feng and Liu, Shaomin and Wang, Li and Tang, Xuegang and Rudolph, Victor (2011) Investigation of gas permeability in carbon nanotube (CNT)− polymer matrix membranes via modifying CNTs with functional groups/metals and controlling modification location. The Journal of Physical Chemistry C, 115 (14). pp. 6661-6670. ISSN 1932-7447

Islam, Md Mainul and Kim, Ho Sung (2011) Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment. Journal of Materials Processing Technology, 211 (4). pp. 708-716. ISSN 0924-0136

Mutsuyoshi, Hiroshi and Hai, Nguyen Duc and Shiroki, Kensuke and Aravinthan, Thiru and Manalo, Allan (2011) Experimental investigation of HFRP composite beams. In: 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-10) , 2-4 Apr 2011, Tampa, FL. United States.

Ho, Mei-Po and Lau, Kin-Tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

Ku, H. and Wong, P. and Huang, J. and Fung, H. and Mohan, T. (2011) Tensile tests of glass powder reinforced epoxy composites: pilot study. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

Banerjee, S. ORCID: https://orcid.org/0000-0001-5446-5290 and Bhattacharyya, D. (2011) Optimal design of sandwich panels made of wood veneer hollow cores. Composites Science and Technology, 71 (4). pp. 425-432. ISSN 0266-3538

Singh, N. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Rilling, D. (2011) Adhesive wear of thermoplastic composite based on kenaf fibres. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225 (2). pp. 101-109. ISSN 1350-6501

Manalo, Allan (2011) Behaviour of fibre composite sandwich structures: a case study on railway sleeper application. [Thesis (PhD/Research)]

Ahmed, Mansur and Islam, Md Saiful and Ahsan, Qumrul and Islam, Md Mainul (2011) Fabrication and characterization of unidirectional silk fibre composites. Key Engineering Materials, 471-472 (1). pp. 20-25. ISSN 1013-9826

Awad, Ziad K. and Yusaf, Talal F. (2011) Finite element analysis of fibre reinforce concrete beam subject to high temperature by using EURO-code models. Key Engineering Materials, 471-472. pp. 343-348. ISSN 1013-9826

Sirimanna, Chamila Sampath and Islam, Md Mainul and Aravinthan, Thiru (2011) Polymer based filler materials as infill for GFRP pile connector. Key Engineering Materials, 471-472. pp. 763-768. ISSN 1013-9826

Tarawneh, Mouad. A. and Ahmad, Sahrim Hj. and Rasid, Rozaidi and Yahya, S. Y. and Lau, Kin-tak and Kong, Ing and Noum, Se Yong Eh (2011) Thermal behavior of MWNT-reinforced thermoplastic natural rubber nanocomposites. Journal of Reinforced Plastics and Composites, 30 (3). pp. 216-221. ISSN 0731-6844

Ho, Mei-Po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Mechanical properties of an injected silk fibre reinforced PLA composite. In: 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX), 14-17 Jan 2011, Auckland, New Zealand.

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2011) A comparison of the shear behaviour of a fibre composite sandwich structure in the transverse and in-plane directions. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials , 7-10 Dec 2010, Melbourne, Australia.

Lin, Hua and Zeng, Xuesen and Sherburn, Martin and Long, Andrew C. and Clifford, Mike J. (2011) Automated geometric modelling of textile structures. Textile Research Journal, 82 (16). pp. 1689-1702. ISSN 0040-5175

Guades, E. J. and Sirimanna, C. S. and Aravinthan, T. and Islam, M. M. (2011) Behaviour of fibre composite pile under axial compression load. In: 21st Australasian Conference on the Mechanics of Structures and MateriaIs (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Sirimanna, Chamila S. (2011) Behaviour of fibre composite piles for timber pile rehabilitation. [Thesis (PhD/Research)]

Islam, M. M. and Aravinthan, T. (2011) Behaviour of fibre composite sandwich panels under uniformly distributed loading. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Kabir, M. M. and Wang, H. and Cardona, F. and Aravinthan, T. (2011) Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Ho, M. P. and Lau, K. T. and Wang, H. (2011) Effect of degumming on tussah silk fibre. In: 18th International Conference on Composite Materials (ICCM 2011): Composite Materials: Key to the Future, 21-26 Aug 2011, Jeju, Korea.

Crossley, R. J. and Schubel, P. J. and Warrior, N. A. (2011) Experimental determination and control of prepreg tack for automated manufacture. Plastics, Rubber and Composites, 40 (6-7). pp. 363-368. ISSN 1465-8011

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2011) Experimental investigation into gomuti fibres/polyester composites. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. (2011) Identification of distortions to FBG spectrum using FBG fixed filters. In: 18th International Conference on Composite Materials (ICCM 2011): Composite Materials: Key to the Future, 21-26 Aug 2011, Jeju, Korea.

Leng, Jinsong and Li, Jianjun and Lau, Alan kin-tak (2011) Introduction to multifunctional polymer nanocomposites. In: Multifunctional polymer nanocomposites. Taylor & Francis (CRC Press), Boca Raton, FL. United States, pp. 1-18. ISBN 978-1-4398-1682-0

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2011) Multi-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applications. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Leng, Jinsong and Lau, Alan kin-tak, eds. (2011) Multifunctional polymer nanocomposites. Taylor & Francis (CRC Press), Boca Raton, FL. United States. ISBN 978-1-4398-1682-0

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2011) Natural fibre composites with QLD based fibres and vegetable oils. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Bauer, Svetlana M. and Ermakov, Andrei M. and Kashtanova, Stanislava V. and Morozov, Nikita F. (2011) Nonclassical models in the shell theory with applications to multilayered nanotubes. In: 3rd ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2011), 25-28 May 2011, Corfu, Greece.

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2011) Preliminary development of polymer based filler materials for GFRP tubular connector. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2011) Temperature effects on full scale FRP bridge using innovative composite components. In: 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), 27-29 Sep 2010, Beijing, China.

Manalo, A. C. and Aravinthan, T. and Karunasena, W. and Stevens, N. (2011) The effect of modulus of elasticity on the behaviour of railway turnout sleepers. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Epaarachchi, J. A. (2011) The effect of viscoelasticity on fatigue behaviour of polymer matrix composites. In: Creep and fatigue in polymer matrix composites. Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 492-513. ISBN 978-1-84569-656-6

Islam, Md Mainul and Kim, Ho Sung and Kabir, Mohammad Mazedul (2010) An overview on syntactic foam core and paper skin sandwich composites as potential building materials. In: 2010 International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2010), 23-24 Dec 2010, Khulna, Bangladesh.

Kabir, Mohammad Mazedul and Islam, Md Mainul and Wang, Hao (2010) Mechanical and thermal properties of untreated and chemically treated jute fibre reinforced composites. In: 1st International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2010) , 23-24 Dec 2010, Khulna, Bangladesh.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Followell, David and Birt, Peter and Canning, John and Stevenson, Michael (2010) An investigation of spectral response of embedded Fibre Bragg Grating (FBG) sensors in a hollow composite cylindrical beam under pure torsion and combined loading. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Australia.

Sirimanna, Chamila S. and Islam, Md Mainul and Aravinthan, Thiru (2010) Effects of temperature on a pultruded FRP composite. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Western Australia.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Canning, John (2010) Effects of the self distortions of embedded FBG sensors on spectral response due to torsional and combined loads. In: 3rd Asia-Pacific Workshop on Structural Health Monitoring (APWSHM 2010), 30 Nov-2 Dec 2010, Tokyo, Japan.

Islam, Md Mainul and Aravinthan, Thiru (2010) Behaviour of structural fibre composite sandwich panels under point load and uniformly distributed load. Composite Structures, 93 (1). pp. 206-215. ISSN 0263-8223

Cardona, F. and Ku, H. and Chouzenoux, L. (2010) Effect of tannin on flexural properties of phenol formaldehyde glycerol reinforced composites: preliminary results. Journal of Reinforced Plastics and Composites, 29 (24). pp. 3543-3553. ISSN 0731-6844

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Warna (2010) Evaluation of the strength and stiffness of glue-laminated fibre composite sandwich panels for structural beam application. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Western Australia.

Aravinthan, T. and Heldt, T. (2010) Innovative strengthening technique using post-tensioned fibre composite wraps for bridge headstocks. Australian Journal of Structural Engineering, 11 (2). pp. 117-128. ISSN 1328-7982

Zhao, Yong-Qing and Lau, Kin-Tak and Kim, Jang-Kyo and Xu, Cai-Ling and Zhao, Dan-Dan and Li, Hu-Lin (2010) Nanodiamond/poly (lactic acid) nanocomposites: effect of nanodiamond on structure and properties of poly (lactic acid). Composites Part B: Engineering, 41 (8). pp. 646-653. ISSN 1359-8368

Karunasena, Warna (2010) The effect of debonding on the natural frequencies of laminated fibre composite sandwich plates. In: 6th Australasian Congress on Applied Mechanics (ACAM 6) , 12-15 Dec 2010, Perth, Western Australia.

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and El-Tayeb, N. S. M. (2010) Wear characteristics of thermoset composite under high stress three-body abrasive. Tribology International, 43 (12). pp. 2365-2371. ISSN 0301-679X

Bose, Saswata and Kuila, Tapas and Uddin, Md. Elias and Kim, Nam Hoon and Lau, Alan K. T. and Lee, Joong Hee (2010) In-situ synthesis and characterization of electrically conductive polypyrrole/graphene nanocomposites. Polymer, 51 (25). pp. 5921-5928. ISSN 0032-3861

Epaarachchi, Jayantha A. and Rathnaweera, Gayan and Canning, John and Stevenson, Michael (2010) Response Fibre Bragg Grating (FBG) strain sensors embedded at different locations through the thickness around a delamination in a composite lamina. In: 7th Asian-Australasian Conference on Composites (ACCM7), 15-18 Nov 2010, Taipei, Taiwan.

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2010) Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review. In: Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2010) Investigation of frequency characteristics of GFRP/phenolic sandwich beams. In: Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2010) A review of current development in natural fiber composites for structural and infrastructure applications. In: Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

Guades, E. J. and Aravinthan, T. and Islam, M. M. (2010) An overview on the application of FRP composites in piling system. In: Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Douglas, Steven (2010) Fibre composite sandwich beam: an alternative to railway turnout sleeper? In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Wang, Hao (2010) Sustainable materials research at USQ. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Cardona, Francisco and Aravinthan, Thiru and Fedrigo, Jessica and Moscou, Clarisse (2010) Synthesis of phenolic bio-resins for advanced composites in civil engineering structures. In: Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Chin, C. W. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2010) Tribological behaviour of KFRE composite. International Journal of Modern Physics B, 24 (28). pp. 5589-5599. ISSN 0217-9792

Tawfik, Qaidar and Karunasena, Warna (Karu) (2010) Use of CFRP for rehabilitation of steel structures: a review. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Assiriyage, Buddhi Nuwan Lanka (2010) An investigation of aluminium/eproxy particulate composite system - impact/long-term behavior. [USQ Project]

Donald, Michael Craig (2010) Comparative properties of epoxy/sawdust composites with palm oil cured by microwave and thermal treatment. [USQ Project]

Tai, Ping (2010) Dielectric, thermal and mechanical properties of sawdust reinforced epoxy composites post-cured in microwaves. [USQ Project]

Bailey, Thomas Sullivan (2010) Environmentally friendly natural waste materials for use in civil structures. [USQ Project]

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) Flexural behaviour of glue-laminated fibre composite sandwich beams. Composite Structures, 92 (11). pp. 2703-2711. ISSN 0263-8223

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) In-plane shear behaviour of fibre composite sandwich beams using asymmetrical beam shear test. Construction and Building Materials, 24 (10). pp. 1952-1960. ISSN 0950-0618

Zhao, Yong-Qing and Cheung, Hoi-Yan and Lau, Kin-Tak and Xu, Cai-Ling and Zhao, Dan-Dan and Li, Hu-Lin (2010) Silkworm silk/poly(lactic acid) biocomposites: dynamic mechanical, thermal and biodegradable properties. Polymer Degradation and Stability, 95 (10). pp. 1978-1987. ISSN 0141-3910

Bajracharya, Rohan Muni (2010) Structural evaluation of concrete-expanded polystyrene sandwich panels for slab applications. [USQ Project]

Pola, Nigel Peter (2010) Synthesis of modified phenolic resins using renewable materials for advanced composites in civil engineering structures. [USQ Project]

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Nirmal, Umar and Wong, K. J. (2010) Three-body abrasion on wear and frictional performance of treated betelnut fibre reinforced epoxy (T-BFRE) composite. Materials and Design, 31 (9). pp. 4514-4521. ISSN 0264-1275

Islam, Md Mainul and Kim, Ho Sung (2010) Manufacturing and behaviour of sandwich composites made of starch as binder for core and adhesive between core and skins. In: 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010), 24-26 Sept 2010, Kottayam, Kerala, India.

Ahmed, Mansur and Islam, Md Saiful and Ahsan, Qumrul and Islam, Md Mainul (2010) Physical and tensile properties of raw and treated silk fibres. In: 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010), 24-26 Sept 2010, Kottayam, Kerala, India.

Ku, H. and Trada, M. and Huq, R. (2010) A pilot study on the flexural properties of vinyl ester composites filled with glass powder. Advanced Materials Research, 123-125. pp. 3-6. ISSN 1022-6680

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2010) Effect of oil palm fibres volume fraction on mechanical properties of polyester composites. International Journal of Modern Physics B, 24 (23). pp. 4459-4470. ISSN 0217-9792

Lau, Kin-Tak (2010) Recent research trend in marine engineering materials (Keynote lecture). In: 160th Eastern Forum of Sciences and Technology , 20-21 Sep 2011, Shanghai, China.

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Warna (2010) Shear behavior of glue-laminated composite sandwich beams. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna (2010) Behaviour of structural glulam beams from sustainable fibre composite sandwich panels. In: 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference (CECAR5 and ASEC2010): Innovative Community Building, 8-12 Aug 2010, Sydney, Australia.

Aravinthan, Thiru and Manalo, Allan and Douglas, Steve (2010) Development of a fibre composite turnout sleeper. In: 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference (CECAR5 and ASEC2010): Innovative Community Building, 8-12 Aug 2010, Sydney, Australia.

Ku, H. and Cardona, F. and Rogers, D. and Munoz, J.-C. (2010) Development of polymer network of phenolic and epoxies resins mixed with linseed oil: pilot study. Journal of Materials Engineering and Performance, 19 (6). pp. 912-919. ISSN 1059-9495

Awad, Z. K. and Gonzalez, F. and Aravinthan, T. (2010) Advanced robust design optimization of FRP sandwich floor panels. IOP Conference Series: Materials Science and Engineering, 10 (1). pp. 1-9. ISSN 1757-8981

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2010) Integrated-RBF network method for free vibration analysis of laminated composite plates. In: 9th World Congress on Computational Mechanics and 4th Asian-Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), 19-23 Jul 2010, Sydney, Australia.

Rao, Sanjeev and Banerjee, Sourish ORCID: https://orcid.org/0000-0001-5446-5290 and Jayaraman, Krishnan and Bhattacharyya, Debes (2010) Compressive behavior of fibre reinforced honeycomb cores. In: 2008 IUTAM Symposium on Multi-Functional Material Structures and Systems, 10-12 Dec 2008, Bangalore, India.

Epaarachchi, Jayantha A. and Reushle, Matthew T. (2010) Performance of aluminium/vinylester particulate composite. In: PRICM7: 7th Pacific Rim International Conference on Advanced Materials and Processing, 2-6 Aug 2010, Cairns, Australia.

Guo, Qing Bing and Lau, Kin-Tak and Rong, Min Zhi and Zhang, Ming Qiu (2010) Optimization of tribological and mechanical properties of epoxy through hybrid filling. Wear, 269 (1-2). pp. 13-20. ISSN 0043-1648

Nirmal, Umar and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Rilling, Dirk and Brevern, P. V. (2010) Effect of betelnut fibres treatment and contact conditions on adhesive wear and frictional performance of polyester composites. Wear, 268 (11-12). pp. 1354-1370. ISSN 0043-1648

Cheung, Hoi-Yan and Lau, Kin-Tak and Pow, Yu-Fung and Zhao, Yong-Qing and Hui, David (2010) Biodegradation of a silkworm silk/PLA composite. Composites Part B: Engineering, 41 (3). pp. 223-228. ISSN 1359-8368

Ku, H. and Trada, M. and Nixon, R. and Wong, P. (2010) Flexural properties of phenolic resin reinforced with glass powder: preliminary results. Journal of Applied Polymer Science, 116 (1). pp. 347-354. ISSN 0021-8995

Lau, Kin-Tak and Epaarachchi, Jayantha and Sudarshan, T. S. (2010) Sensors, actuators, and intelligent processing [Preface]. Materials and Manufacturing Processes, 25 (4). p. 211. ISSN 1042-6914

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

Park, Ok-kyung and Kim, Nam Hoon and Lau, Kin-Tak and Lee, Joong Hee (2010) Effect of surface treatment with potassium persulfate on dispersion stability of multi-walled carbon nanotubes. Materials Letters, 64 (6). pp. 718-721. ISSN 0167-577X

Epaarachchi, J. and Ku, H. and Gohel, K. (2010) A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites. Journal of Composite Materials, 44 (6). pp. 779-788. ISSN 0021-9983

Manalo, A. C. and Aravinthan, T. and Karunasena, W. and Islam, M. M. (2010) Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions. Composite Structures, 92 (4). 984-995 . ISSN 0263-8223

Manalo, A. and Aravinthan, T. and Karunasena, W. and Ticoalu, A. (2010) A review of alternative materials for replacing existing timber sleepers. Composite Structures, 92 (3). pp. 603-611. ISSN 0263-8223

Ku, H. and Kota, V. and Trada, M. (2010) Optimum percentage of fly ash reinforcement in vinyl ester composites. Journal of Materials in Civil Engineering, 22 (1). pp. 104-107. ISSN 0899-1561

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Nirmal, U. (2010) On the mechanical properties of a treated betelnut fibre-reinforced polyester composite. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 224 (9). pp. 1805-1814. ISSN 0954-4062

Nasir, T. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and McWilliam, S. and Salih, N. D. and Hui, L. T. (2010) An artificial neural network for prediction of the friction coefficient of multi-layer polymeric composites in three different orientations. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (2). pp. 419-429. ISSN 0954-4062

Wong, K. J. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Low, K. O. and Ng, Y. and Tan, S. L. (2010) Effects of fillers on the fracture behaviour of particulate polyester composites. Journal of Strain Analysis for Engineering Design, 45 (1). pp. 67-78. ISSN 0309-3247

Ji, Xiaoyong and Li, Hui and Hui, David and Hsiao, Kuang-Ting and Ou, Jinping and Lau, Alan K. T. (2010) I-V characteristics and electro-mechanical response of different carbon black/epoxy composites. Composites Part B: Engineering, 41 (1). pp. 25-32. ISSN 1359-8368

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Lau, Saijod T. W. and McWilliam, S. (2010) Polyester composite based on betelnut fibre for tribological applications. Tribology International, 43 (1-2). pp. 503-511. ISSN 0301-679X

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and El-Tayeb, N. S. M. (2010) Wet adhesive wear characteristics of untreated oil palm fibre-reinforced polyester and treated oil palm fibre-reinforced polyester composites using the pin-on-disc and block-on-ring techniques. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 224 (2). pp. 123-131. ISSN 1350-6501

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Yusaf, Talal (2010) Abrasive wear behaviour of epoxy composite based on kenaf fibres. In: ASIATRIB 2010: Frontiers in Tribology - Knowledge and Friendship, 5-9 Dec 2010, Perth, Australia.

Cardona, F. and Aravinthan, T. and Moscou, C. (2010) Modified PF resins for composite structures with improved mechanical properties. Polymers and Polymer Composites, 18 (6). pp. 297-306. ISSN 0967-3911

Ku, H. and Trada, M. and Cecil, T. and Wong, P. (2010) Tensile tests of phenol formaldehyde glass-powder-reinforced composites: pilot study. Journal of Applied Polymer Science, 116 (1). pp. 10-17. ISSN 0021-8995

Wong, K. J. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Low, K. O. (2010) The effects of alkali treatment on the interfacial adhesion of bamboo fibres. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 224 (3). pp. 139-148. ISSN 1464-4207

Nirmal, Umar and Jamil, Nadia and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Rilling, Dirk and Brevern, P. V. (2010) The potential of using treated betelnut fibres as reinforcement for tribo-bio polymeric composites subjected to dry/wet contact conditions. In: ICNP 2010: Macro to Nano Scales, 24-26 Sep 2010, Kottayam, India.

Zhang, Z. and Yao, X. and Wang, H. (2010) Thermochemistry study of the effect of alkali content on the early geopolymerisation at room temperature. In: 1st International Conference on Advances in Chemically-Activated Materials (CAM 2010), 9-12 May 2010, Jinan, China.

Islam, M. M. and Aravinthan, T. and Van Erp, G. (2009) Behaviour of innovative fibre composite sandwich panels under point loading. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009) , 9-11 Dec 2009, Seoul, Korea.

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2009) Flexural behaviour of laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

Karunasena, W. and Aravinthan, T. and Manalo, A. C. (2009) Vibration of debonded laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

Cardona, F. and Rogers, D. and Gurney, R. and Trada, M. and Ku, H. (2009) Flexural tests of phenol formaldehyde and SLG composites: pilot study. Journal of Reinforced Plastics and Composites, 28 (22). pp. 2761-2769. ISSN 0731-6844

Ku, Harry Siu-Lung and Cardona, Francisco and Trada, Mohar and Vigier, Gurlaume (2009) Flexural properties of sawdust reinforced phenolic composites: pilot study. Journal of Applied Polymer Science, 114 (3). pp. 1927-1934. ISSN 0021-8995

Ku, Harry S. and Trada, Mohan and Zong, Xuejin and Wong, Peter (2009) Flexural properties of phenolic resin reinforced with glass powder. In: ICAST 2009: 20th International Conference on Adaptive Structures and Technologies , 20-22 Oct 2009, Shatin, Hong Kong.

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2009) Finite element analysis of fibre composite sandwich panel. In: Southern Engineering Conference, 17-18 Oct 2009, Springfield, Queensland, Australia.

Trada, Mohan and Ku, Harry and Vedhar, Jayant (2009) Flexural strength of phenol formaldehyde composites post-cured in microwaves: preliminary results. Multi-Functional Materials and Structures II. pp. 1399-1402. ISSN 1022-6680

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

Plain, Matthew (2009) Behaviour of innovative fibre composite sandwich panels for structural applications. [USQ Project]

Pickford, Christopher Ian (2009) Behaviour of laminated fibre composite sandwich girders. [USQ Project]

Mayen, David Ayuen (2009) Composites from natural renewable resources in civil engineering: Epoxidized vegetable oil with epoxy resin, fly ash and sawdust fillers(mechanical, physical and structural properties). [USQ Project]

Manthey, Nathan William (2009) Environmentally friendly natural fibre composites with Qld. based vegetable oils. [USQ Project]

Cooney, Tyson (2009) Epoxidised resins from natural renewable resources. [USQ Project]

Huq, Rezwanul (2009) Flexural strength of three types of glass powder reinforced vinyl ester composites. [USQ Project]

Korowa, Geoffrey (2009) Fracture toughness of glass powder reinforced vinyl ester resin. [USQ Project]

Wu, Chao di (2009) Investigate the best percentage by weight of glass powder, as fillers in phenolic resins by using tensile tests. [USQ Project]

Taylor, Alan Owen (2009) Investigation on the fatigue behaviour of pultruded fibre composites. [USQ Project]

Eddine, Mustapha Jamal (2009) Measurement of fracture toughness, mechanical and electrical loss tangents of calcium carbonate reinforced vinyl ester composites. [USQ Project]

Cheng, Sha and Lau, Kin-Tak and Liu, Tao and Zhao, Yong-Qing and Lam, Pou-Man and Yin, Yansheng (2009) Mechanical and thermal properties of chicken feather fiber/PLA green composites. Composites Part B: Engineering, 40 (7). pp. 650-654. ISSN 1359-8368

Cheung, Hoi-Yan and Ho, Mei-Po and Lau, Kin-Tak and Cardona, Francisco and Hui, David (2009) Natural fibre-reinforced composites for bioengineering and environmental engineering. Composites Part B: Engineering, 40 (7). pp. 655-663. ISSN 1359-8368

Cheung, Hoi-Yan and Ho, Mei-po and Lau, Kin-tak and Mosallam, Ayman (2009) Study on the mechanical properties of different silkworm silk fibers. Journal of Composite Materials, 43 (22). pp. 2521-2531. ISSN 0021-9983

Zerbst, Samuel David William (2009) Temperature effects on a fibre reinforced polymer material. [USQ Project]

Zhong, Xiaoliang (2009) Tensile strength of sawdust reinforced vinyl ester composites. [USQ Project]

Rennie, Tristan James (2009) The effect of vandalism on fibre composite structures. [USQ Project]

Coulter, Allison Kerrie-Anne (2009) Use of Fiber Bragg grating sensors in structural health monitoring. [USQ Project]

Ku, H. and Xiang, W. and Pattarachaiyakoop, N. (2009) Mathematical modeling of the fracture toughness of phenol formaldehyde composites reinforced with E-spheres. Advanced Materials Research, 79-82. pp. 1165-1168. ISSN 1022-6680

Manalo, Allan and Mutsuyoshi, Hiroshi and Aravinthan, Thiru and Matsui, Takahiro (2009) Behaviour of hybrid FRP composite I-girder with concrete deck. In: 9th International Symposium of the Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures (FRPRCS-9): Current Challenges and Future Trends, 13-15 Jul 2009, Sydney, Australia.

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Islam, Mainul (2009) Flexural behaviour of composite sandwiches for structural applications. In: Proceedings of the 9th International Symposium on Fibre Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-9): Current Challenges and Future Trends, 13-15 Jul 2009, Sydney, Australia.

Choy, Yat-Sze and Lau, Kin-Tak and Wang, C. and Chau, C. W. and Liu, Yang and Hui, D. (2009) Composite panels for reducing noise in air conditioning and ventilation systems. Composites Part B: Engineering, 40 (4). pp. 259-266. ISSN 1359-8368

Ku, H. and Cardona, F. and Pattarachaiyakoop, N. and Trada, M. (2009) Fracture toughness of phenol formaldehyde composites reinforced with e-spheres. Journal of Composite Materials, 43 (7). pp. 741-754. ISSN 0021-9983

Ku, H. S. and Fok, S. C. and Siores, E. (2009) Contrasts on fracture toughness and flexural strength of varying percentages of SLG-reinforced phenolic composites. Journal of Composite Materials, 43 (8). pp. 885-895. ISSN 0021-9983

Guo, Qing Bing and Rong, Min Zhi and Jia, Guo Liang and Lau, Kin-Tak and Zhang, Ming Qiu (2009) Sliding wear performance of nano-SiO2/short carbon fiber/epoxy hybrid composites. Wear, 266 (7-8). pp. 658-665. ISSN 0043-1648

Lam, Chun-Ki and Lau, Kin-Tak (2009) Optimization effect of micro hardness by nanoclay clusters in nanoclay/epoxy composites. Journal of Thermoplastic Composite Materials, 22 (2). pp. 213-225. ISSN 0892-7057

Liang, Qing Quan (2009) Performance-based analysis of concrete-filled steel tubular beam–columns, part I: theory and algorithms. Journal of Constructional Steel Research, 65 (2). pp. 363-372. ISSN 0143-974X

Liang, Qing Quan (2009) Performance-based analysis of concrete-filled steel tubular beam–columns, part II: verification and applications. Journal of Constructional Steel Research, 65 (2). pp. 351-362. ISSN 0143-974X

Guo, Qing Bing and Lau, Kin-Tak and Zheng, Bing Fa and Rong, Min Zhi and Zhang, Ming Qiu (2009) Imparting ultra-low friction and wear rate to epoxy by the incorporation of microencapsulated lubricant? Macromolecular Materials and Engineering, 294 (1). pp. 20-24. ISSN 1438-7492

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2009) Frictional and wear performance of polyester composites based on coir fibres. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (1). 51 -59. ISSN 1350-6501

Yousif, Belal F. ORCID: https://orcid.org/0000-0003-3847-5469 and Leong, Ong B. and Ong, Low K. and Jye, Wong K. (2009) The effect of treatment on tribo-performance of CFRP composites. Recent Patents on Materials Science, 2 (1). pp. 67-74. ISSN 1874-4648

Islam, Md Mainul (2009) Behaviour of innovative fibre composite sandwich panels. In: Workshop on Life Cycle Assessment of Sustainable FRP Materials, 14 Dec 2009, Saitama, Japan.

Omar, T. and Aravinthan, T. (2009) Design and development of a fibre composite windmill structure. Australian Journal of Structural Engineering, 10 (1). pp. 25-36. ISSN 1328-7982

Vandenbroucke, A. and Cardona, F. and Ku, H. and Rogers, D. (2009) Effects of chopped hemp on mechanical and thermal properties of epoxy resins. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Leonard, L. W. H. and Wong, K. J. and Low, K. O. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2009) Fracture behaviour of glass fibre-reinforced polyester composite. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 223 (2). pp. 83-89. ISSN 1464-4207

Venkatesh, V. C. and Yousif, B. F., eds. (2009) International Journal of Precision Technology, Vol. 1, No. 2, 2009. Inderscience Enterprises Ltd., United Kingdom.

Chin, C. W. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2009) Potential of kenaf fibres as reinforcement for tribological applications. Wear, 267 (9-10). pp. 1550-1557. ISSN 0043-1648

Kim, Ho Sung and Islam, Md Mainul (2009) Syntactic foams as building materials consisting of inorganic hollow microspheres and starch binder. In: Building materials: properties, performance and applications. Nova Science Publishers, Inc., New York, USA. ISBN 978-1-60741-082-9

Cardona, F. and Moscou, C. (2009) Synthesis and characterization of modified phenolic resins for composites with enhanced mechanical properties. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Gill, Nirmal Singh and Lau, Saijod T. W. and Devadas, Alvin (2009) The potential of using betelnut fibres for tribo-polyester composites considering three different orientations. In: 2008 ASME International Mechanical Engineering Congress and Exposition (IMECE 2008), 31 Oct-6 Nov 2008, Boston, MA. United States.

Aravinthan, Thiru, ed. (2008) Fibre composites in civil infrastructure: past, present and future. University of Southern Queensland, Toowoomba, Australia.

El-Tayeb, N. S. M. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2008) Adhesive wear performance of T-OPRP and UT-OPRP composites. Tribology Letters, 32 (3). pp. 199-208. ISSN 1023-8883

Karunasena, W. (2008) Elastodynamic reciprocity relations for wave scattering by flaws in fiber-reinforced composite plates. Journal of Mechanics of Materials and Structures, 3 (10). pp. 1831-1846. ISSN 1559-3959

Ku, H. and Jacobson, W. and Trada, M. and Cardona, F. and Rogers, D. (2008) Tensile tests of phenol formaldehyde SLG reinforced composites: pilot study. Journal of Composite Materials, 42 (26). pp. 2783-2793. ISSN 0021-9983

Tan, V. B. C. and Zeng, X. S. and Shim, V. P. W. (2008) Characterizing and constitutive modelling of aramid fibres at high strain rates. International Journal of Impact Engineering, 35 (11). pp. 1303-1313. ISSN 0734-743X

Li, Xiao-Feng and Lau, Kin-Tak and Yin, Yan-Sheng (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology, 68 (14). pp. 2876-2881. ISSN 0266-3538

Si, Xiaojuan and Guo, Linfeng and Wang, Yimin and Lau, Kin-Tak (2008) Preparation and study of polypropylene/polyethylene terephthalate composite fibres. Composites Science and Technology, 68 (14). pp. 2943-2947. ISSN 0266-3538

Sawchuk, Mike (2008) Flexural strength SLG-reinforced phenolic composites cured in microwaves. [USQ Project]

Islam, Md Mainul and Kim, Ho Sung (2008) Manufacture of syntactic foams using starch as binder: post-mold processing. Materials and Manufacturing Processes, 23 (8). pp. 884-892. ISSN 1042-6914

Ku, H. and Cardona, F. and Ball, J. and Jacobson, W. and Trada, M. (2008) Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study. Journal of Composite Materials, 42 (19). pp. 2083-2095. ISSN 0021-9983

Wang, Zhicai and Xu, Cailing and Zhao, Yongqing and Zhao, Dandan and Wang, Zhe and Li, Hulin and Lau, Kin-Tak (2008) Fabrication and mechanical properties of exfoliated clay-CNTs/epoxy nanocomposites. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 490 (1-2). pp. 481-487. ISSN 0921-5093

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and El-Tayeb, N. S. M. (2008) High-stress three-body abrasive wear of treated and untreated oil palm fibre-reinforced polyester composites. Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, 222 (5). pp. 637-646. ISSN 1350-6501

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and El-Tayeb, N. S. M. (2008) Wear and friction characteristics of CGRP composite under wet contact condition using two different test techniques. Wear, 265 (5-6). pp. 856-864. ISSN 0043-1648

Ku, H. and Cardona, F. and Rogers, D. and Vandenbroucke, A. (2008) Effects of EPON on mechanical and thermal properties of epoxy resins. In: ICMMSE 2008: International Conference on Multifunctional Materials and Structures, 28-31 Jul 2008, Hong Kong.

Aravinthan, T. and Omar, T. (2008) Fibre composite windmill structure - challenges in the design and development. In: 4th International Conference on FRP Composites in Civil Engineering (CICE 2008), 22-24 Jul 2008, Zurich, Switzerland.

Munoz, J.-C. and Ku, H. and Cardona, F. and Rogers, D. (2008) Effects of catalysts and post-curing conditions in the polymer network of epoxy and phenolic resins: preliminary results. Journal of Materials Processing Technology, 202 (1-3). pp. 486-492. ISSN 0924-0136

Nguyen-Van, H. and Mai-Duy, N. and Tran-Cong, T. (2008) Free vibration analysis of laminated plate/shell structures based on FSDT with a stabilized nodal-integrated quadrilateral element. Journal of Sound and Vibration, 313 (1-2). pp. 205-223. ISSN 0022-460X

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2008) Replacing of glass fibres with seed oil palm fibres for tribopolymeric composites. Tribology - Materials, Surfaces and Interfaces, 2 (2). pp. 99-103. ISSN 1751-5831

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2008) Investigation of embedded near infrared fibre Bragg grating (FBG) sensors (830 nm) in structural health monitoring of glass fibre composite structures. In: 19th International Conference on Optical Fibre Sensors (OFS-19), 15-18 Apr 2008, Perth, Australia.

El-Tayeb, N. S. M. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Yap, T. C. (2008) An investigation on worn surfaces of chopped glass fibre reinforced polyester through SEM observations. Tribology International, 41 (5). pp. 331-340. ISSN 0301-679X

Islam, Md Mainul and Kim, Ho Sung (2008) Pre-mould processing for syntactic foams: modelling, theory and experiment. In: 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME-13), 27-29 May, 2008, Cairo, Egypt.

Roberts, A. J. (2008) Co-ordinate transforms underpin multiscale modelling and reduction in deterministic and stochastic systems. In: Complex Systems II: SPIE Symposium on Microelectronics, MEMS, and Nanotechnology 2007, 5-7 Dec 2007, Canberra, Australia.

Omar, Tarek (2008) Multi-pultrusion fibre composite truss systems for deployable shelters. [Thesis (PhD/Research)]

Goh, S. and Ku, H. and Ang, S. L. (2008) Prediction of crushing stress in composite materials. Journal of Composite Materials, 42 (5). pp. 467-484. ISSN 0021-9983

Ku, Harry and Rogers, David and Davey, Robert and Cardona, Francisco and Trada, Mohan (2008) Fracture toughness of phenol formaldehyde composites: pilot study. Journal of Materials Engineering and Performance, 17 (1). pp. 85-90. ISSN 1059-9495

Ku, Harry S. and Yusaf, Talal (2008) Processing of composites using variable and fixed frequency microwave facilities. Progress in Electromagnetic Research B, PIERB . pp. 185-205. ISSN 1937-6472

Ku, H. S. (2008) Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation. Journal of Electromagnetic Waves and Applications, 22 (1). pp. 69-84. ISSN 0920-5071

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and El-Tayeb, N. S. M. and Yusaf, Talal (2008) Influence of material structure properties on sliding contact performance of CGRP composite. International Journal for Manufacturing Science and Technology, 10 (1). pp. 1-7. ISSN 1524-1548

Chin, C. W. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2008) Adhesive and frictional behaviour of polymeric composites based on kenaf fibre. In: 2nd International Conference on Advanced Tribology (iCAT 2008), 3-5 Dec 2008, Singapore.

Danaelan, D. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2008) Adhesive wear performance of CFRP multilayered polyester composites under dry/wet contact conditions. Surface Review and Letters, 15 (6). pp. 919-925. ISSN 0218-625X

Thorpe, D. S. (2008) Adoption of advanced materials by SME constructors. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Shinozaki, H. and Pandey, G. R. and Mutsuyoshi, H. and Aravinthan, T. (2008) AFRP retrofitting of RC structures in Japan. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Ticoalu, A. and Aravinthan, T. and Karunasena, W. (2008) An investigation on the stiffness of timber sleepers for the design of fibre composite sleepers. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Epaarachchi, J. A. (2008) Change of dynamic response of pultruded composite components used in advanced composite structures due to fatigue and fracture. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Omar, Tarek and Aravinthan, Thiru (2008) Design and development of a fibre composite wind mill structure. In: Australasian Structural Engineering Conference 2008: Engaging with Structural Engineering, 26-27 June 2008, Melbourne, Vic, Australia.

Epaarachchi, J. A. and Karunasena, W. and Aravinthan, T. (2008) Dynamic behavior of hybrid composite bridge girder. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Omar, T. and Aravinthan, T. (2008) Fibre composite windmill structure - investigations and design considerations. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2008) M2S2 modular deployable shelter system: concept and analysis technique. In: 4th International Structural Engineering and Construction Conference (ISEC 4): Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Manalo, A. C. and Mutsuyoshi, H. and Asamoto, S. and Aravinthan, T. and Matsui, T. (2008) Mechanical behavior of hybrid FRP composites with bolted joints. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Chee, Su Be and Al Shalabi, Ammar and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2008) On the effect of counterface materials on tribo-behavior of steel wire sliding under dry contact condition. Surface Review and Letters, 15 (4). pp. 355-360. ISSN 0218-625X

Suntharavadivel, T. G. and Aravinthan, T. (2008) Strengthening of shear damaged RC beams with external clamping. In: 4th International Conference on Structural and Construction Engineering (ISEC 4): Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Karunasena, Warna (Karu) and Martin, Nicole (2007) The effect of debonding on the flexural behaviour of reinforced concrete beams strengthened with fibre reinforced polymer. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

Ku, H. and Chan, W. L. and Trada, M. and Baddeley, D. (2007) An evaluation of fracture toughness of vinyl ester composites cured under microwave conditions. Journal of Materials Engineering and Performance, 16 (6). pp. 741-745. ISSN 1059-9495

Cardona, F. and Ku, H. and Pattarachaiyakoop, N. and Rogers, D. and Trada, M. (2007) Fracture toughness of phenol formaldehyde composites post-cured in microwaves. Journal of Electromagnetic Waves and Applications, 21 (14). pp. 2137-2146. ISSN 0920-5071

Islam, Md Mainul and Kim, Ho Sung (2007) Properties and mechanical behaviour of novel sandwich composites made of syntactic foam and paper skin. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

Pandey, G. R. and Mutsuyoshi, H. and Aravinthan, T. (2007) Retrofitting reinforced concrete bridge frames using externally bonded FRP sheets. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

Wong Wan Sie, Winxie (2007) Analysis and design of curtain wall systems for high rise buildings. [USQ Project]

Cardona, F. and Rogers, D. and Van Erp, G. (2007) Investigation by TGA-FTIR of the effect of styrene content and thickness on the UV-curing of vinylester resins. Journal of Thermoplastic Composite Materials, 20 (6). pp. 601-615. ISSN 0892-7057

Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2007) Tungsten fibre reinforced Zr-based bulk metallic glass composites. Materials and Manufacturing Processes, 22 (5-6). pp. 687-691. ISSN 1042-6914

Doherty, William and Halley, Peter J. and Edye, Les and Rogers, David and Cardona, Francisco and Park, Yosup and Woo, Tim (2007) Studies on polymers and composites from lignin and fiber derived from sugar cane. Polymers for Advanced Technologies, 18 (8). pp. 673-678. ISSN 1042-7147

Ku, Harry S. and Ang, Soh Fong and Snook, Chris and Baddeley, Douglas (2007) Micrographs of fractured vinyl ester composites. Journal of Reinforced Plastics and Composites, 26 (11). pp. 1111-1134. ISSN 0731-6844

Aravinthan, Thiru (2007) A strengthening system: international patent for innovative structural strengthening using externally prestressed fibre wraps. .

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2007) Innovative all composite multi-pultrusion truss system for stressed arch deployable shelters. In: AICSGE 6: 6th Alexandria International Conference on Structural and Geotechnical Engineering, 15-17 Apr 2007, Alexandria, Egypt.

Omar, T. and Van Erp, G. and Key, P. (2007) Modular deployable composite shelters - truss system. In: ACIC 2007: Advanced Composites in Construction Conference , 2-4 Apr 2007, Bath, UK.

Ku, H. and Trada, M. and Puttgunta, V. C. (2007) Mechanical properties of vinyl ester composites cured by microwave irradiation: pilot study. Key Engineering Materials, 334-33. pp. 537-540. ISSN 1013-9826

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and El-Tayeb, N. S. M. (2007) Tribological evaluations of polyester composites considering three orientations of CSM glass fibres using BOR machine. Applied Composite Materials, 14 (2). pp. 105-116. ISSN 1573-4897

Cardona, F. and Rogers, D. and Davey, S. and Van Erp, G. (2007) Investigation of the effect of styrene content on the ultimate curing of vinylester resins by TGA-FTIR. Journal of Composite Materials, 41 (2). pp. 137-152. ISSN 0021-9983

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2007) A simple and accurate four-node quadrilateral element using stabilized nodal integration for laminated plates. CMC: Computers, Materials and Continua, 6 (3). pp. 159-176. ISSN 1546-2218

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Jye, W. K. and El-Tayeb, N. S. M. (2007) An investigation on tensile, compression and flexural properties of natural fibre reinforced polyester composites. In: 2007 ASME International Mechanical Engineering Congress and Exposition (IMECE 2007), 11-15 Nov 2007, Seattle, Washington, USA.

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2007) Analysis of laminated composite plate/shell structures using a stabilized nodal-integrated quadrilateral element. In: 1st International Conference on Modern Design, Construction & Maintenance of Structures, 10-11 Dec 2007, Hanoi, Vietnam.

Mai-Duy, Nam and Khennane, Amar and Tran-Cong, Thanh (2007) Computation of laminated composite plates using integrated radial basis function networks. CMC: Computers, Materials and Continua, 5 (1). pp. 63-77. ISSN 1546-2218

Wang, Hao and Fu, Huameng (2007) Development of bulk metallic glass composites. In: The world of bulk metallic glasses and their composites. Research Signpost, Kerala, India, pp. 73-92. ISBN 978-81-308-0196-4

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and El-Tayeb, N. S. M. (2007) Effect of water as lubricant on friction and wear properties of CGRP composite evaluated by POD and BOR techniques. Surface Review and Letters, 14 (2). pp. 185-191. ISSN 0218-625X

El-Tayeb, N. S. M. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2007) Evaluation of glass fiber reinforced polyester composite for multi-pass abrasive wear applications. Wear, 262 (9-10). pp. 1140-1151. ISSN 0043-1648

Epaarachchi, Jayantha A. and Karunasena, Warna and Aravinthan, Thiru (2007) Investigation of dynamic behaviour of a hybrid composite bridge girder. In: 14th International Conference on Composite Structures (ICCS 14), 19 - 21 Nov 2007, Melbourne, Australia.

Epaarachchi, Jayantha A. and Clegg, Richard E. and Canning, John (2007) Investigation of the use of near infrared FBG (830nm) sensors for monitoring the structural response of 0/90 woven cloth/CSM glass fibre/vynylester composite under static and fatigue loading. In: HUMS 2007: 5th DSTO International Conference on Health and Usage Monitoring , 19-22 Mar 2007, Melbourne, Australia.

Islam, Md Mainul and Kim, Ho Sung (2007) Manufacture of syntactic foams: pre-mold processing. Materials and Manufacturing Processes, 22 (1). pp. 28-36. ISSN 1042-6914

Islam, Md Mainul and Kim, Ho Sung (2007) Novel syntactic foams made of ceramic hollow micro-spheres and starch: theory, structure and properties. Journal of Materials Science, 42 (15). pp. 6123-6132. ISSN 1573-4803

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and El-Tayeb, N. S. M. (2007) On the effect of woven glass fabric orientations on wear and friction properties of polyester composite. Surface Review and Letters, 14 (3). pp. 489-497. ISSN 0218-625X

Islam, Md Mainul and Kim, Ho Sung (2007) Syntactic foams consolidated with starch: mixing behaviour for post-mould processing. Advanced Materials Research, 29-30. pp. 169-172. ISSN 1022-6680

Islam, Md Mainul and Kim, Ho Sung (2007) Syntactic foams consolidated with starch: modelling for pre-mould processing. Advanced Materials Research, 29-30. pp. 165-168. ISSN 1022-6680

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and El-Tayeb, N. S. M. (2007) The effect of oil palm fibers as reinforcement on tribological performance of polyester composite. Surface Review and Letters, 14 (6). pp. 1095-1102. ISSN 0218-625X

Ku, H. and Trada, M. and Puttgunta, V. C. and Kota, V. (2007) Yield and tensile strength of vinyl ester composites cured by microwaves. Journal of Electromagnetic Waves and Applications, 21 (4). pp. 517-526. ISSN 0920-5071

Omar, T. and Van Erp, G. and Key, P. W. (2006) Stressed arch modular deployable composite shelters: concept and development. In: CICE 2006: 3rd International Conference on FRP Composites in Civil Engineering, 13-15 Dec 2006, Miami, Fl, USA.

Nguyen-Van, Hieu and Khennane, Amar and Tran-Cong, Thanh (2006) Monte-Carlo simulation of the durability of glass fibre reinforced composite under environmental stress corrosion. In: 2006 International Conference on Nonlinear Analysis & Engineering Mechanics Today, 11-14 Dec 2006, Ho Chi Minh City, Vietnam.

Ku, Harry S. (2006) Productivity improvement of composites processing through the use of industrial microwave technologies. Progress in Electromagnetics Research (PIER), PIER 6. pp. 267-285. ISSN 1559-8985

Islam, Md Mainul and Kim, Ho Sung (2006) Syntactic foams consolidated with starch: mixing behaviour for post-mould processing. In: 4th International Conference on Advanced Materials & Processing (ICAMP-4), 10-13 Dec 2006, Hamilton, New Zealand.

Islam, Md Mainul and Kim, Ho Sung (2006) Syntactic foams consolidated with starch: modelling for pre-mould processing. In: 4th International Conference on Advanced Materials & Processing (ICAMP-4), 10-13 Dec 2006, Hamilton, New Zealand.

Davey, Robert James (2006) Best percentage by weight of micro-spheres as fillers in phenolic resins, with fracture toughness as a benchmark. [USQ Project]

Gurney, Richard Noel (2006) Best percentage weight of microspheres as fillers in resin using three-point bending test. [USQ Project]

Chan, Wooi Lieh (2006) Fracture analysis of vinyl ester composites cured under microwave conditions. [USQ Project]

Ang, Soon Lim (2006) Predicting the crushing stress of composite materials. [USQ Project]

Chiu, Kwong Man Karen (2006) The use of recycled concrete aggregate in structural concrete around South East Queensland. [USQ Project]

Epaarachchi, Jayantha A. (2006) Assessment of damage accumulation in glass fibre reinforced plastic (GFRP) composites under spectrum fatigue loading. In: 2006 International Conference on Structural Integrity and Failure (SIF2006), 27-29 Sept 2006, Sydney, Australia.

Epaarachchi, Jayantha A. (2006) A study of estimation of damage accumulation of glass fibre reinforce plastic (GFRP) composites under a block loading situation. Composite Structures, 75 (1-4). pp. 88-92. ISSN 0263-8223

Epaarachchi, Jayantha A. and Clegg, Richard (2006) An experimental investigation of the properties of cross-ply laminate used for manufacturing of small aircraft components. Composite Structures, 75 (1-4). pp. 93-99. ISSN 0263-8223

Epaarachchi, Jayantha A. (2006) Effects of static-fatigue (tension) on the tension-tension fatigue life of glass fibre reinforced plastic composites. Composite Structures, 74 (4). pp. 419-425. ISSN 0263-8223

Karunasena, Karu W. and Grice, Andrew (2006) Load-deformation behaviour prediction of timber beams externally reinforced with composite materials. In: 10th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-10), 3-5 August 2006, Bangkok, Thailand.

Islam, Md Mainul and Kim, Ho Sung (2006) Novel syntactic foams made of ceramic hollow micro-spheres and starch - theory, structure and properties. In: 5th International Composites Conference (ACUN-5) , 11-14 July 2006, Sydney, Australia.

Hardeo, Pravendra and Karunasena, W. (Karu) (2006) Three dimensional finite element analysis of concrete filled FRP tubular model piles under lateral loads. In: International Composites Conference (ACUN-5), 11-14 July 2006, Sydney, Australia.

Fu, H. M. and Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2006) In situ TiB-reinforced cu-based bulk metallic glass composites. Scripta Materialia, 54 (11). pp. 1961-1966. ISSN 1359-6462

Lee, Kuang Sheng (2006) Experimental study of the mechanical properties of particulate reinforced composite. [USQ Project]

Yao, X. D. and Wu, C. Z. and Wang, Hao and Cheng, H. M. and Lu, G. Q. (2006) Effects of carbon nanotubes and metal catalysts on hydrogen storage in magnesium nanocomposite. Journal of Nanoscience and Nanotechnology, 6 (2). pp. 494-498. ISSN 1533-4880

Karunasena, W. (2006) Elastodynamic reciprocity relations for wave scattering by flaws in fiber-reinforced composite plates. In: 10th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-10), 3-5 August 2006, Bangkok, Thailand.

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2006) In-situ Cu-based bulk metallic glass composite. International Journal of Modern Physics B, 20 (25-27). pp. 3963-3968. ISSN 0217-9792

Wang, Hao (2006) In-situ Si/Al composite produced by semisolid metal processing. In: ACUN-5 International Composites Conference, 11-14 July 2006, Sydney, Australia.

Omar, Tarek and Heldt, Tim and Key, P. and Van Erp, Gerard (2006) M2S2 modular deployable composite shelters: concept and loading criteria. Australian Journal of Structural Engineering, 6 (3). pp. 217-226. ISSN 1328-7982

Yao, X. and Wang, H. (2006) Modeling of semisolid structure formation in controlled nucleation method. International Journal of Modern Physics B, 20 (25-27). pp. 4123-4128. ISSN 0217-9792

Ku, Harry S. and Tsang, Shing Hin and Baddeley, Douglas and Snook, Chris (2006) Short bar tests for vinyl ester particulate reinforced composites cured by microwaves. Australian Journal of Structural Engineering, 7 (1). pp. 65-73. ISSN 1328-7982

Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2006) Tungsten fibre reinforced Zr-based bulk metallic glass composites. In: ACUN-5 International Composites Conference, 11-14 July 2006, Sydney, Australia.

Ku, Harry S. and Puttgunta, V. C. and Trada, Mohan (2006) Young's modulus of vinyl ester composites cured by microwave irradiation: preliminary results. Journal of Electromagnetic Waves and Applications, 20 (14). pp. 1911-1924. ISSN 0920-5071

Liu, Hong-Yuan and Yan, Wenyi and Mai, Yiu-Wing (2006) Z-pin bridging in composite laminates and some related problems. Australian Journal of Mechanical Engineering, 3 (1). pp. 11-19.

Omar, T. and Heldt, T. and Key, P. and Van Erp, G. (2005) Development of modular deployable composite shelters. In: ASEC 2005: 5th Australian Structural Engineering Conference , 11-14 Sep 2005, Newcastle, Australia.

Ku, Harry S. and Cheng, Y. M. and Snook, Chris and Baddeley, Douglas (2005) Drop weight impact test fracture of vinyl ester composites: micrographs of pilot study. Journal of Composite Materials, 39 (18). pp. 1607-1620. ISSN 0021-9983

Aravinthan, Thiru and Heldt, Tim (2005) Strengthening of bridge headstocks with external post-tensioning: design issues and strengthening techniques. In: Road System and Engineering Technology Forum, 9-11 August 2005, Brisbane, Australia.

Van Erp, Gerard and Cattell, Craig and Heldt, Tim (2005) Fibre composite structures in Australia's civil engineering market: an anatomy of innovation. Structural Control and Health Monitoring, 7 (3). pp. 150-160. ISSN 1365-0556

Wang, Hao (2005) Bulk metallic glass composites. Journal of Materials Science and Technology, 21 (s1). pp. 86-90. ISSN 1005-0302

Fu, H. M. and Zhang, H. F. and Wang, Hao and Zhang, Qingsheng and Hu, Z. Q. (2005) Synthesis and mechanical properties of Cu-based bulk metallic glass composites containing in-situ TiC particles. Scripta Materialia, 52 (7). pp. 669-673. ISSN 1359-6462

Epaarachchi, Jayantha A. (2005) Effects of static fatigue on the tension-tension fatigue life of glass / polyester composites. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005): Advances in Applied Mechanics, 16-18 Feb 2005, Melbourne, Australia.

Khennane, Amar and Melchers, Robert E. (2005) A meso-scale finite element model for environmental stress corrosion of GFRP. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005): Advances in Applied Mechanics, 16-18 Feb 2005, Melbourne, Australia.

Epaarachchi, Jayantha A. and Clausen, Philip D. (2005) A new cumulative fatigue damage model for glass fibre reinforced plastic composites under step/discrete loading. Composites Part A: Applied Science and Manufacturing, 36 (9). pp. 1236-1245. ISSN 1359-835X

Ku, Harry S. (2005) Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation. Journal of Reinforced Plastics and Composites, 24 (10). pp. 1035-1049. ISSN 0731-6844

Ku, Harry S. and Baddeley, Douglas and Snook, Chris and Chew, C. S. (2005) Fracture toughness of vinyl ester composites cured by microwave irradiation: preliminary results. Journal of Reinforced Plastics and Composites, 24 (11). pp. 1181-1202. ISSN 0731-6844

Aravinthan, T. and Heldt, T. (2005) Innovative strengthening technique using prestressed fibre wraps for bridge headstocks. In: ASEC 2005: 6th Australian Structural Engineering Conference Structural engineering : preserving and building into the future , 11-14 Sep 2005, Newcastle, Australia.

Lee, Richard Anthony (2005) Micrographs of the fracture of vinyl ester composites cured by microwaves. [USQ Project]

Chew, C. S. and Ku, Harry S. and Baddeley, Douglas and Snook, Chris (2005) Micrographs of the fracture of vinyl ester composites cured by microwaves: pilot study. Journal of Electromagnetic Waves and Applications, 19 (1). pp. 67-82. ISSN 0920-5071

Karunasena, W. and Anderson, W. C. (2005) Strength and ductility prediction of concrete beams reinforced with internal steel and external composite materials. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005), 16-18 February 2005, Melbourne, Australia.

Dai, Shao-Cong and Yan, Wenyi and Liu, Hong-Yuan and Mai, Yiu-Wing (2004) Experimental study on z-pin bridging law by pullout test. Composites Science and Technology, 64 (16). pp. 2451-2457. ISSN 0266-3538

Ku, Harry S. and Siores, Elias (2004) Shrinkage reduction of thermoset matrix particle reinforced composites during curing using microwaves irradiation. Transactions, Hong Kong Institution of Engineers, 11 (3). pp. 29-34. ISSN 1023-697X

Ang, Soh Fong (2004) Evaluation impact strength on particulate reinforced (25% and 33%) vinyl ester composite cured under microwave conditions. [USQ Project]

Tsang, Shing Hin (2004) Fracture analysis of vinyl ester composites under microwave condition. [USQ Project]

Yan, Wenyi and Liu, Hong-Yuan and Mai, Yiu-Wing (2004) Mode II delamination toughness of z-pinned laminates. Composites Science and Technology, 64 (13-14). pp. 1937-1945. ISSN 0266-3538

Ku, Harry S. and Widjaya, Budiman and Lee, Kin Fung and Li, Chun Wai (2004) Thermal analysis comparison between three random glass fibre-reinforced thermoplastic matrix composites bonded by adhesives using microwaves. Journal of Reinforced Plastics and Composites, 23 (3). 1443-1460. ISSN 0731-6844

Ayers, Stephen R. and van Erp, Gerard (2004) A Code of Practice for the structural design of fibre composites. Proceedings of the Institution of Civil Engineers, Structures & Buildings, 157 (1). pp. 3-8. ISSN 1751-7702