![]() | Up a level |
Al-Juboori, Raed A. and Naji, Osamah and Bowtell, Les ORCID: https://orcid.org/0000-0001-6694-7609 and Alpatova, Alla and Soukane, Sofiane and Ghaffour, Norreddine
(2021)
Power effect of ultrasonically vibrated spacers in air gap membrane distillation: Theoretical and experimental investigations.
Separation and Purification Technology, 262:118319.
pp. 1-12.
ISSN 1383-5866
Saeed, Ramiz and Buttsworth, David and Saleh, Khalid (2019) A new wind tunnel facility for ice crystal icing experiments. In: 2019 International Conference on Icing of Aircraft, Engines, and Structures, 17-21 June 2019, Minneapolis, MN, USA.
Leis, John ORCID: https://orcid.org/0000-0001-5930-8139 and Buttsworth, David and Saeed, Ramiz and Saleh, Khalid and McGilvray, Matthew and Gillespie, David
(2019)
Microwave technique for liquid water detection
in icing applications.
In: 2019 International Conference on Icing of Aircraft, Engines, and Structures, 17-21 June 2019, Minneapolis, Minnesota, USA.
Saeed, Ramiz Ibraheem (2019) New wind tunnel facility for icing experiments on models of turbofan compressor surfaces. [Thesis (PhD/Research)]
Leis, John ORCID: https://orcid.org/0000-0001-5930-8139 and Buttsworth, David
(2018)
A Robust Method for Tuning Photoacoustic Gas Detectors.
IEEE Transactions on Industrial Electronics, 65 (5).
pp. 4338-4346.
ISSN 0278-0046
Helwig, Sahay and Sahay, Akshay ORCID: https://orcid.org/0000-0002-8626-2313
(2018)
Developing Feedback to Control an Intelligent Battery Charger for Wet Batteries.
In: 2018 Australasian Universities Power Engineering Conference (AUPEC 2018), 27-30 Nov, 2018, Auckland, New Zealand.
Leis, John ORCID: https://orcid.org/0000-0001-5930-8139 and Buttsworth, David
(2017)
Determining the Convergence of SynchronousMeasurements for Embedded Industrial Applications.
IEEE Transactions on Industrial Electronics, 64 (9).
pp. 7392-7398.
ISSN 0278-0046
Mirazimiabarghouei, Seyed Javad (2017) Distributed static compensator (DSTATCOM) for voltage support in single wire earth return (SWER) networks. [Thesis (PhD/Research)]
Leis, John ORCID: https://orcid.org/0000-0001-5930-8139 and Buttsworth, David
(2016)
A temperature compensation technique for near-infrared methane gas threshold detection.
IEEE Transactions on Industrial Electronics, 63 (3).
pp. 1813-1821.
ISSN 0278-0046
Mirazimiabarghouei, Seyed Javad and Ahfock, Tony and Helwig, Andreas (2016) Placement of Distribution STATic COMpensator (DSTATCOM) as voltage support equipment in Single Wire Earth Return (SWER) system. In: 6th IEEE International Conference on Power and Energy (PECon 2016): Empowering Technologies for Future Energy Sustainability, 28-29 Nov 2016, Melaka, Malaysia.
Mirazimiabarghouei, Seyed Javad and Ahfock, Tony and Helwig, Andreas (2016) Single Wire Earth Return (SWER) system voltage support using four quadrant DSTATCOM. In: 6th IEEE International Conference on Power and Energy (PECon 2016): Empowering Technologies for Future Energy Sustainability, 28-29 Nov 2016, Melaka, Malaysia.
Leis, John ORCID: https://orcid.org/0000-0001-5930-8139 and Buttsworth, David
(2015)
Convergence in synchronous measurements.
In: 8th International Conference on Signal Processing and Communication Systems (ICSPCS 2014), 15-17 Dec 2014, Gold Coast, Australia.
Leis, John ORCID: https://orcid.org/0000-0001-5930-8139 and Buttsworth, David and Snook, Chris and Holmes, Graham
(2014)
Detection of potentially explosive methane levels using a solid-state infrared source.
IEEE Transactions on Instrumentation and Measurement, 63 (12).
pp. 3088-3095.
ISSN 0018-9456
Kennedy, Isaac (2014) Design and development of a fibre-optic microphone. [USQ Project]
Leis, John ORCID: https://orcid.org/0000-0001-5930-8139
(2013)
Simultaneous gain, drift and offset estimation in measurement systems using coherent sampling.
In: 7th International Conference on Signal Processing and Communication Systems (ICSPCS 2013), 16-18 Dec 2013, Gold Coast, Australia.
Ikin, James (2013) Design and development of a fibre optic microphone. [USQ Project]
Skillington, Robert George (2013) DSP based lock-in amplifier. [USQ Project]
Patel, Kunal J. (2013) Effects of transformer inrush current. [USQ Project]
Ku, H. and Trada, M. and Tai, P. (2013) Dielectric properties of sawdust reinforced epoxy composites post-cured in microwaves. Journal of Reinforced Plastics and Composites, 32 (10). pp. 765-774. ISSN 0731-6844
Leis, John ORCID: https://orcid.org/0000-0001-5930-8139 and Kelly, Christopher and Buttsworth, David
(2012)
Sampling, quantization and computational aspects of the quadrature lock-in amplifier.
In: 6th International Conference on Signal Processing and Communication Systems (ICSPCS 2012), 12-14 Dec 2012, Gold Coast, Australia.
Willigen, Timothy (2012) Nuclear instruments in mineral processing. [USQ Project]
Ku, Harry S. (2012) Processing of materials using electromagnetic fields. In: Wiley encyclopedia of composites, 2nd ed. John Wiley & Sons, Inc., Hoboken, NJ. United States, pp. 2487-2500. ISBN 978-0-470-12828-2
Leis, J. ORCID: https://orcid.org/0000-0001-5930-8139 and Martin, P. and Buttsworth, D.
(2012)
Simplified digital lock-in amplifier algorithm.
Electronics Letters, 48 (5).
pp. 259-261.
ISSN 0013-5194
Cox, Adam (2011) Stereo vision for webcams. [USQ Project]
Atem, Thiew (2011) The skid mounted substation. [USQ Project]
Bose, Saswata and Kim, Nam Hoon and Kuila, Tapas and Lau, Kin-tak and Lee, Joong Hee (2011) Electrochemical performance of a graphene polypyrrole nanocomposite as a supercapacitor electrode. Nanotechnology, 22 (29). p. 5202. ISSN 0957-4484
Bose, Saswata and Kuila, Tapas and Uddin, Md. Elias and Kim, Nam Hoon and Lau, Alan K. T. and Lee, Joong Hee (2010) In-situ synthesis and characterization of electrically conductive polypyrrole/graphene nanocomposites. Polymer, 51 (25). pp. 5921-5928. ISSN 0032-3861
Leis, John ORCID: https://orcid.org/0000-0001-5930-8139 and Zhao, Weichang and Pinnaduwage, Lal A. and Gehl, Anthony C. and Allman, Steve L. and Shepp, Allan and Mahmud, Ken K.
(2010)
Estimating gas concentration using a microcantilever-based electronic nose.
Digital Signal Processing: A Review Journal, 20 (4).
pp. 1229-1237.
ISSN 1051-2004
Ahfock, A. and Gambetta, D. (2010) Sensorless commutation of printed circuit brushless direct current motors. IET Electric Power Applications, 4 (6). pp. 397-406. ISSN 1751-8660
Gambetta, D. and Ahfock, A. (2009) A new sensorless commutation technique for brushless DC motors. IET Electric Power Applications, 3 (1). pp. 40-49. ISSN 1751-8660
Springall, Glenn (2008) Design and implementation of a remotely accesible inrush current testing package for power (distribution)transformers. [USQ Project]
Looi Zi Qing, Sean (2007) Improving the performance of an industrial cold room. [USQ Project]
Bollaart, Clement (2007) OPC cycle time analyser. [USQ Project]
Chong, Albert K.-F. (2007) An inexpensive stereo-image capture tool for motion study. Photogrammetric Record, 22 (119). pp. 226-237. ISSN 0031-868X
Lee, Boon Chong (2006) Measuring moisture content of biofilter media using capacitance. [USQ Project]
Pilane, Tshepo Skuuman (2006) Recycling consumer electrical and electronic equipment. [USQ Project]
Wells, Colin G. and Ball, James A. R. (2005) Mode-matching analysis of a shielded rectangular dielectric-rod waveguide. IEEE Transactions on Microwave Theory and Techniques, 53 (10). pp. 3169-3177. ISSN 0018-9480
Struthers, Craig (2005) Real-time monitoring and control of a pressure control system. [USQ Project]
Gray, David Thomas Chalmer (2004) Impact of demand-side management on substations. [USQ Project]
Supurmaniam, Adrian (2004) Life cycle assessment in electronics. [USQ Project]
Zeimer, Ashley Karl (2004) The effect of DC current on power transformers. [USQ Project]
Kamel, Fouad M. and Muhlbauer, A. (1984) Impact of solar cell efficiency on the design of photovoltaic systems. Solar Cells, 11 (3). pp. 269-280. ISSN 0379-6787