Browse by Fields of Research (ANZSRC 2020)

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Number of items at this level: 55.

Haidar, Ahmed M. A. and Fakhar, Adila and Muttaqi, Kashem M. (2019) An effective power dispatch strategy for clustered micro-grids while implementing optimal energy management and power sharing control using power line communication. In: 2019 IEEE Industry Applications Society Annual Meeting, 29 Sept - 3 Oct 2019, Baltimore, USA.

Leis, John ORCID: and Buttsworth, David (2017) Determining the Convergence of SynchronousMeasurements for Embedded Industrial Applications. IEEE Transactions on Industrial Electronics, 64 (9). pp. 7392-7398. ISSN 0278-0046

Hoang, Hung (2016) Automatic Circuit Recloser (ACR) communications using P25 RMU (Radio Modem Unit). [USQ Project]

Wentworth, B. (2016) Circuit breaker simulated operation & behaviour under faulted power system conditions. [USQ Project]

Fergusson, Paul (2016) Light Fidelity (Li-Fi) prototype with Raspberry Pi. [USQ Project]

Dortmans, Justin (2016) Overcoming asymmetrical communication delays in line current differential protection circuits. [USQ Project]

Stephens, Benjamin (2016) Sensor to improve detection of line break or earth faults for Victorian answer lines. [USQ Project]

Graham, Sharon (2015) Investigation into the economic feasibility of grid-tied photovoltaic panel and storage systems. [USQ Project]

de Freitas Pessoa, Daniel (2015) STATCOM DC bus voltage control and switching strategy analysis. [USQ Project]

Kirby, Christopher (2015) Comparison of PV maximum power point. [USQ Project]

Field, Shaun (2015) Machine vision and sensing with an Android. [USQ Project]

Leis, John ORCID: and Buttsworth, David (2015) Convergence in synchronous measurements. In: 8th International Conference on Signal Processing and Communication Systems (ICSPCS 2014), 15-17 Dec 2014, Gold Coast, Australia.

Chen, F. and Ye, H. and Yang, J. and Huang, Y. and Zhang, J. and Qi, X. and Zhao, C. and Zhu, J. and Zhou, W. (2015) A standardized design methodology for complex digital logic components of cyber-physical systems. Microprocessors and Microsystems, 39 (8). pp. 1245-1254. ISSN 0141-9331

Anumula, Sreekanth (2014) Communications for smart grid substation monitoring using WIMAX protocol. [USQ Project]

Marland, Michael (2014) Alternatives to SF6 in HV circuit breaker insulation. [USQ Project]

Dugdale, Paul Nicholas (2014) Arc flash protection of a low voltage motor control centre. [USQ Project]

Keys, Callum Kirby (2014) Mansell power lifter control circuitry redesign. [USQ Project]

Yadav, Orunganti Vara Prasad (2014) Voltage control in micro-grids. [USQ Project]

Leis, John ORCID: (2013) Simultaneous gain, drift and offset estimation in measurement systems using coherent sampling. In: 7th International Conference on Signal Processing and Communication Systems (ICSPCS 2013), 16-18 Dec 2013, Gold Coast, Australia.

Skillington, Robert George (2013) DSP based lock-in amplifier. [USQ Project]

Barrett, Roland (2013) Operating temperature of current carrying copper busbar conductors. [USQ Project]

Pasanduka, Timothy (2013) Systematic procedure to determine line current differential relay settings with back up distance for a 500 kV ac three phase line. [USQ Project]

Cai, Kun and Yue, Xuejun and Hong, Tiansheng and Xu, Xing and Huang, Shuangping (2013) Design of soil moisture sensor based on phase-frequency characteristics of RC networks. Transactions of the Chinese Society of Agricultural Engineering , 29 (7). pp. 36-43. ISSN 1002-6819

Burgess, R. and Ahfock, A. (2013) Evaluation of neutral voltages in arc suppression coil systems. Australian Journal of Electrical and Electronics Engineering , 10 (1). pp. 127-136. ISSN 1448-837X

Ramesh Kumar, Nandini and Xiang, Wei and Wang, Yafeng (2012) Two-symbol FPGA architecture for fast arithmetic encoding in JPEG 2000. Journal of Signal Processing Systems, 69 (2). pp. 213-224. ISSN 1939-8018

Duffy, Michael Anthony (2012) Investigation into the impacts on 11kV feeder operation as a result of the increasing use of amorphous core transformers. [USQ Project]

Palmer, John Michael (2012) Wireless LAN based infrared remote control. [USQ Project]

Leis, J. ORCID: and Martin, P. and Buttsworth, D. (2012) Simplified digital lock-in amplifier algorithm. Electronics Letters, 48 (5). pp. 259-261. ISSN 0013-5194

Cox, Adam (2011) Stereo vision for webcams. [USQ Project]

Shahid, S. and Ball, J. A. R. and Wells, C. G. and Wen, P. ORCID: (2011) Reflection type Q-factor measurement using standard least squares methods. IET Microwaves, Antennas and Propogation, 5 (4). pp. 426-432. ISSN 1751-8725

Ahfock, A. and Gambetta, D. (2011) Stator eddy-current losses in printed circuit brushless motors. IET Electric Power Applications , 5 (1). pp. 159-167. ISSN 1751-8660

Downs, Nathan ORCID: and Parisi, Alfio ORCID: (2010) Sunlight and solar cells: teaching digital design and communication through the development of a simple monitoring station. Teaching Science: The Journal of the Australian Science Teachers Association, 56 (4). pp. 52-58. ISSN 1449-6313

Marwan, Marwan and Kamel, Fouad (2010) User-controlled electrical energy consumption towards optimized usage of electricity infrastructure. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia .

Mowat, David (2010) Callide C Power Station's generator protection system 'ride through capabilities' for various external faults. [USQ Project]

Miller, Justin (2010) Design of a wireless acquisition system for a digital stethoscope. [USQ Project]

Coggan, Robert Walter (2010) High impedance earth fault modelling. [USQ Project]

Ahfock, A. and Gambetta, D. (2010) Sensorless commutation of printed circuit brushless direct current motors. IET Electric Power Applications, 4 (6). pp. 397-406. ISSN 1751-8660

Gambetta, Daniele Morco (2009) New design methodologies for printed circuit axial field brushless dc motors. [Thesis (PhD/Research)]

Zheng, Aoyang and Wang, Yafeng and Yang, Dacheng and Xiang, Wei (2009) Self-adapting cyclic delay diversity system. In: 4th International Conference on Rough Set and Knowledge Technology (RSKT 2009) , 14-16 Jul 2009, Gold Coast, Australia.

Gambetta, D. and Ahfock, A. (2009) A new sensorless commutation technique for brushless DC motors. IET Electric Power Applications, 3 (1). pp. 40-49. ISSN 1751-8660

Wang, Xin and Xu, Weilin and Li, Wenbin and Cui, Weigang (2009) Study on the electrical resistance of textiles under wet conditions. Textile Research Journal, 79 (8). pp. 753-760. ISSN 0040-5175

Wen, Peng ORCID: and Stapleton, Cary and Li, Yan ORCID: (2008) Tension control of a winding machine for rectangular coils. In: 10th International Conference on Control, Automation, Robotics and Vision (ICARCV 2008), 17-20 Dec 2008, Hanoi, Vietnam.

Pijpers, Louis Kennedy (2008) Design and implementation of a microprocessor-controlled BMX start gate. [USQ Project]

Bowtell, Les ORCID: and Ahfock, Tony (2007) Comparison between unipolar and bipolar single phase grid-connected inverters for PV applications. In: AUPEC 2007: 17th Australasian Universities Power Engineering Conference, 9-12 Dec 2007, Perth, Australia.

Kang, Boon Geh (2007) Wall climbing robot. [USQ Project]

Bollaart, Clement (2007) OPC cycle time analyser. [USQ Project]

Mackenzie, Matthew Robert (2007) PID controller optimisation using genetic algorithms. [USQ Project]

Ahfock, A. and Hewitt, A. J. (2006) DC magnetisation of transformers. IET Electric Power Applications, 153 (4). pp. 601-607. ISSN 1350-2352

Mohamed Ibrahim, Saifudin Bin (2005) The PID controller design using genetic algorithm. [USQ Project]

Costa, Michael (2005) In-vehicle display system. [USQ Project]

Ahfock, Tony L. and Hewitt, Andrew (2005) Modeling of the solid rotor induction motor. In: AUPEC 2005: 15th Australasian Universities Power Engineering Conference, 25-28 Sep 2005, Hobart, Australia.

University of Southern Queensland (2005) Method and apparatus for measuring electrical conductivity. .

Toh, Pei Ling (2004) Interactive web-based signal processing tutor. [USQ Project]

Buttsworth, David R. and Ahfock, Tony L. (2003) A pulsed LED system for schlieren flow visualisation. Technical Report. University of Southern Queensland, Faculty of Engineering and Surveying , Toowoomba, Australia. [Report]

Ball, James A. R. and Horsfield, Brendan (2000) Surface-wave propagation on a grounded dielectric slab covered by a high-permittivity material. IEEE Microwave and Guided Wave Letters, 10 (5). pp. 171-173. ISSN 1531-1309

This list was generated on Mon Jan 24 02:13:44 2022 AEST.