Browse by Fields of Research (ANZSRC 2008)

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Number of items at this level: 35.

Harris, Peter W. and Schmidt, Thomas and McCabe, Bernadette K. (2017) Evaluation of chemical, thermobaric and thermochemical pre-treatment on anaerobic digestion of high-fat cattle slaughterhouse waste. Bioresource Technology, 244 (1). pp. 605-610. ISSN 0960-8524

Khan, Belas Ahmed (2017) Development of antibacterial hemp hurd/poly(lactic acid) biocomposite for food packaging. [Thesis (PhD/Research)]

Hellier, Paul and Ladommatos, Nicos and Yusaf, Talal (2015) The influence of straight vegetable oil fatty acid composition on compression ignition combustion and emissions. Fuel, 143. pp. 131-143. ISSN 0016-2361

Kiran, Esra Uckun and Trzcinski, Antoine P. and Liu, Yu (2015) Developing novel biorefineries using food waste as substrate (Technical report 4). Project Report. National Environment Agency , Singapore. [Report]

Kiran, Esra Uckun and Trzcinski, Antoine P. and Liu, Yu (2014) Developing novel biorefineries using food waste as substrate (Technical report 3). Project Report. National Environment Agency , Singapore. [Report]

Wu, Lin Mei and Tong, Dong Shen and Zhao, Li Zhi and Yu, Wei Hua and Zhou, Chun Hui and Wang, Hao (2014) Fourier transform infrared spectroscopy analysis for hydrothermal transformation of microcrystalline cellulose on montmorillonite. Applied Clay Science, 95. pp. 74-82. ISSN 0169-1317

Ong, Hwai Chyuan and Masjuki, H. H. and Mahlia, T. M. I. and Silitonga, A. S. and Chong, W. T. and Yusaf, Talal (2014) Engine performance and emissions using Jatropha curcas, Ceiba pentandra and Calophyllum inophyllum biodiesel in a CI diesel engine. Energy, 69. pp. 427-445. ISSN 0360-5442

Francucci, G. and Manthey, N. W. and Cardona, F. and Aravinthan, T. (2014) Processing and characterization of 100% hemp-based biocomposites obtained by vacuum infusion. Journal of Composite Materials, 48 (11). pp. 1323-1335. ISSN 0021-9983

Abbaszadeh, A. and Ghobadian, B. and Najafi, G. and Yusaf, T. (2014) An experimental investigation of the effective parameters on wet washing of biodiesel purification. International Journal of Automotive and Mechanical Engineering, 9 (1). pp. 1525-1537. ISSN 2229-8649

Manthey, Nathan W. and Cardona, Francisco and Francucci, Gaston and Aravinthan, Thiru (2013) Thermo-mechanical properties of epoxidized hemp oil-based bioresins and biocomposites. Journal of Reinforced Plastics and Composites , 32 (19). pp. 1444-1456. ISSN 0731-6844

Silitonga, A. S. and Ong, H. C. and Masjuki, H. H. and Mahlia, T. M. I. and Chong, W. T. and Yusaf, Talal F. (2013) Production of biodiesel from Sterculia foetida and its process optimization. Fuel: the science and technology of fuel and energy , 111. pp. 478-484. ISSN 0016-2361

Kiran, Esra Uckun and Trzcinski, Antoine P. and Liu, Yu (2013) Developing novel biorefineries using food waste as substrate (Technical report 1). Technical Report. National Environment Agency , Singapore. [Report]

Al-lwayzy, Saddam H. and Yusaf, Talal (2013) Chlorella protothecoides microalgae as an alternative fuel for tractor diesel engines. Energies, 6 (2). pp. 766-783.

Alsaeed, T. and Yousif, B. F. and Ku, H. (2013) The potential of using date palm fibres as reinforcement for polymeric composites. Materials and Design, 43. pp. 177-184. ISSN 0264-1275

Yan, Zili and Zhang, Jianchun and Zhang, Hua and Wang, Hao (2013) Improvement of mechanical properties of noil hemp fiber reinforced polypropylene composites by resin modification and fiber treatment. Advances in Materials Science and Engineering, 2013. pp. 1-7. ISSN 1687-8434

Al-lwayzy, Saddam H. (2012) Alternative fuels from microalgae for diesel engine. In: USQ Combustion Meeting, 10 Oct 2012, Toowoomba, Australia.

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. (2012) Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview. Composites Part B: Engineering, 43 (7). pp. 2883-2892. ISSN 1359-8368

Xia, Zhigang and Wang, Xin and Ye, Wenxiang and Eltahir, Hafiz A. and Xu, Weilin (2012) Fiber trapping comparison of embeddable and locatable spinning with sirofil and siro core-spinning with flute pipe air suction. Textile Research Journal, 82 (12). pp. 1255-1262. ISSN 0040-5175

Cardona, Francisco (2012) Bio-resins: new structural renewable materials for bio-composite applications. In: 4th KKU International Engineering Conference: Driving Together Towards ASEAN Economic Community (KKU-IENC 2012) , 10-12 May 2012, Khon Kaen University, Thailand.

Yousif, Belal F. (2012) Adhesive wear characteristics of natural fiber-reinforced composites. In: Wear of advanced materials. John Wiley & Sons, Inc., London, United Kingdom, pp. 61-97. ISBN 978-1-84821-352-4

Hasna, A. M. (2011) Microwave processing applications in chemical engineering: cost analysis. Journal of Applied Sciences, 11 (21). pp. 3613-3618. ISSN 1812-5654

Trzcinski, Antoine and Hernandez, Ernesto and Webb, Colin (2011) Direct Sugarcane Bagasse to oil (SB2O). Project Report. University of Manchester , United Kingdom. [Report]

Kilian, Simone (2011) Sugarcane bagasse reinforced thermoplastic composites. [USQ Project]

Kabir, M. M. and Wang, H. and Aravinthan, T. and Cardona, F. and Lau, K. -T. (2011) Effects of natural fibre surface on composite properties: a review. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE2011) , 27-29 Apr 2011, Brisbane, Australia.

Trzcinski, Antoine and Hernandez, Ernesto and Webb, Colin (2011) Added-value processing of ‘algae waste' report 4. Project Report. University of Manchester . [Report]

Trzcinski, Antoine (2011) Excel program to design the main units in an algae biorefinery. [Computer Program]

Allwayzy, S. H. and Yusaf, T. and McCabe, B. and Pittaway, P. and Aravinthan, V. (2010) Microalgae as alternative fuel for compression ignition (CI) Engines. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Trzcinski, Antoine and Hernandez, Ernesto and Webb, Colin (2010) Added-value processing of ‘algae waste' report 3. Project Report. University of Manchester , United Kingdom. [Report]

Trzcinski, Antoine and Hernandez, Ernesto and Webb, Colin (2010) Added-value processing of ‘algae waste' report 2. Project Report. University of Manchester , United Kingdom. [Report]

Rayment, Erin A. and Williams, David J. (2010) Concise review: mind the gap: challenges in characterizing and quantifying cell- and tissue-based therapies for clinical translation. Stem Cells, 28 (5). pp. 996-1004. ISSN 1066-5099

Trzcinski, Antoine (2010) A feasibility study into the bioprocessing of coffee residues. Project Report. Unpublished . [Report]

Ku, Harry Siu-Lung and Cardona, Francisco and Trada, Mohar and Vigier, Gurlaume (2009) Flexural properties of sawdust reinforced phenolic composites: pilot study. Journal of Applied Polymer Science, 114 (3). pp. 1927-1934. ISSN 0021-8995

Cheung, Hoi-Yan and Ho, Mei-po and Lau, Kin-tak and Mosallam, Ayman (2009) Study on the mechanical properties of different silkworm silk fibers. Journal of Composite Materials, 43 (22). pp. 2521-2531. ISSN 0021-9983

Trzcinski, Antoine and Hernandez, Erbesto and Webb, Colin (2009) Added-value processing of ‘algae waste' 1st report. Project Report. University of Manchester , United Kingdom. [Report]

This list was generated on Sat Dec 15 01:34:54 2018 AEST.