Browse by Fields of Research (ANZSRC 2008)

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Number of items at this level: 45.

Birch, Byrenn ORCID: and Buttsworth, David and Loehle, Stefan and Hufgard, Fabian (2021) Fast-Response transient heat flux measurements in a plasma wind tunnel. International Journal of Heat and Mass Transfer, 173:121234. ISSN 0017-9310

Najafi, G. and Hoseini, S. S. and De Goey, L. P. H. and Yusaf, Talal (2020) Optimization of combustion in micro combined heat and power (mCHP) system with the biomass-Stirling engine using SiO2 and Al2O3 nanofluids. Applied Thermal Engineering, 169 (114936). pp. 1-9. ISSN 1359-4311

Li, Qiang (2017) Modelling the compressive strength and thermal properties of foam concrete. [Thesis (PhD/Research)]

Sharifian, Ahmad and Hashempour, Javad (2016) A novel ember shower simulator for assessing performance of low porosity screens at high wind speeds against firebrand attacks. Journal of Fire Sciences, 34 (4). pp. 335-355. ISSN 0734-9041

Hashempour, Javad and Sharifian, Ahmad and Billingsley, John ORCID: (2016) Experimental measurement of direct thermal radiation through single-layer square-cell plain woven screens. Journal of Heat Transfer: Transactions of the ASME, 138 (1). 012701-1-012701-6. ISSN 0022-1481

Sharifian, Ahmad and Tangalajuk Siang, Jeri (2015) Impacts of room temperature on the performance of a portable propane air conditioner. International Journal of Air-Conditioning and Refrigeration, 23 (2). pp. 1550015-1. ISSN 2010-1325

Surendar, Swetha (2014) Flexural behaviour of sandwich panels under elevated temperature. [USQ Project]

Zhang, Zuhua and Provis, John L. and Reid, Andrew and Wang, Hao (2014) Fly ash-based geopolymers: the relationship between composition, pore structure and efflorescence. Cement and Concrete Research, 64. pp. 30-41. ISSN 0008-8846

Rashmi, W. and Ismail, A. F. and Khalid, M. and Anuar, A. and Yusaf, T. (2014) Investigating corrosion effects and heat transfer enhancement in smaller size radiators using CNT-nanofluids. Journal of Materials Science, 49 (13). pp. 4544-4551. ISSN 0022-2461

University of Southern Queensland (2014) An aerolance system. .

Ismail, A. F. and Anuar, A. and Rashmi, W. and Yusaf, T. (2014) Corrosion effects of CNT-nanofluids on different metals. In: 3rd International Conference on Advanced Materials and Information Technology Processing (AMITP 2013), 1-2 Dec 2013, Los Angeles, United States.

Ismail, A. F. and Abd-Halim, B. A. and Rashmi, W. and Yusaf, T. (2014) Smaller radiator with enhanced heat transfer using CNT-nanofluids. In: International Conference on Future Energy, Environment, and Materials (FEEM 2013), 24-25 Dec 2013, Hong Kong.

Liu, Hui-min and Li, Zhi-peng and Wang, Hao (2013) Effect of in-situ TiC particles on hot deformation behavior of spray formed 7075 Al alloy. Transactions of Materials and Heat Treatment (Cailiao Rechuli Xuebao), 34 (S2). pp. 173-178. ISSN 1009-6264

Zhang, Zuhua and Yang, Tao and Wang, Hao and Yao, Xiao (2013) Inorganic polymer foams: transform from non-structural to structural upon fire. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Etaati, Amir and Dehghani, Kamran and Ebrahimi, G. R. and Wang, Hao (2013) Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations. Metals and Materials International, 19 (1). pp. 5-9. ISSN 1598-9623

Thai-Quang, N. and Mai-Duy, N. ORCID: and Tran, C.-D. ORCID: and Tran-Cong, T. (2013) A direct forcing immersed boundary method employed with compact integrated RBF approximations for heat transfer and fluid flow problems. CMES: Computer Modeling in Engineering and Sciences, 96 (1). pp. 49-90. ISSN 1526-1492

Vennes, S. and Kawka, A. and O'Toole, S. J. and Nemeth, P. and Burton, D. (2012) The shortest period sdB plus white dwarf binary CD-30 11223 (GALEX J1411-3053). The Astrophysical Journal Letters, 759 (1). L25 (1)-L25 (5). ISSN 2041-8205

Li, Qiang and Wang, Hao and Bullen, Frank and Reid, Andrew (2012) Numerical simulation of porous structure in foam concrete on thermal insulation property. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Ku, Harry S. (2012) Processing of materials using electromagnetic fields. In: Wiley encyclopedia of composites, 2nd ed. John Wiley & Sons, Hoboken, NJ. United States, pp. 2487-2500. ISBN 978-0-470-12828-2

Rao, G. Srinivasa and Sharma, K. V. and Chary, S. P. and Bakar, R. A. and Rahman, M. M. and Kadirgama, K. and Noor, M. M. (2011) Experimental study on heat transfer coefficient and friction factor of Al2O3 nanofluid in a packed bed column. Journal of Mechanical Engineering and Sciences, 1 (1). pp. 1-15.

Wandel, Andrew P. ORCID: (2011) A stochastic micromixing model based on the turbulent diffusion length scale. In: 11th Australian Combustion Symposium (ACS 2011), 29 Nov-1 Dec 2011, Newcastle, Australia.

Mossad, Ruth (2011) Cooling towers. In: Encyclopedia of energy engineering and technology. Informa UK (Taylor & Francis Books), London, United Kingdom, pp. 246-254. ISBN 978-0-8493-3653-9

Uddin, J. and Smith, R. J. and Hancock, N. H. and Foley, J. (2011) Eddy covariance measurements of the total evaporation during sprinkler irrigation - preliminary results. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Ku, H. and Wong, P. and Maxwell, A. and Huang, J. and Fung, H. and Mohan, T. (2011) A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

Wang, H. and Ning, Z. L. and Liang, W. Z. and Cao, F. Y. and Sun, J. F. (2010) Microstructure and properties of Mg-Nd-Zn-Zr alloys. In: 2009 International Conference and Exhibition on Materials and AustCeram (MA 2009), 1-3 Jul 2009, Gold Coast, Australia.

Said, Mior A. and Buttsworth, D. R. and Yusaf, T. F. (2009) A review of radiation heat transfer measurement for diesel engines using the two-colour method. In: 3rd International Conference on Energy and Environment (ICEE 2009): Advancement Towards Global Sustainability , 7-8 Dec 2009, Malacca, Malaysia.

Buttsworth, David R. and Agrira, Abdalla and Malpress, Ray and Yusaf, Talal (2009) Simulation of instantaneous heat transfer in spark ignition internal combustion engines: unsteady thermal boundary layer modelling. In: ASME Internal Combustion Engine Division Fall Technical Conference (ICEF 2009) , 27-30 Sep 2009, Lucerne, Switzerland.

Banerjee, S. ORCID: and Yan, W. and Bhattacharyya, D. (2008) Modeling of heat transfer in rotational molding. Polymer Engineering and Science, 48 (11). pp. 2188-2197. ISSN 0032-3888

Suslov, Sergey A. (2008) Thermo-magnetic convection in a vertical layer of ferromagnetic fluid. Physics of Fluids, 20 (8). 084101-084118. ISSN 1070-6631

Ku, H. S. (2008) Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation. Journal of Electromagnetic Waves and Applications, 22 (1). pp. 69-84. ISSN 0920-5071

Mossad, Ruth (2006) Numerical simulation to optimize the design of double glazed doors for closed refrigerated vertical display cabinets. In: 13th International Heat Transfer Conference IHTC-13, 13-18 Aug 2006, Sydney, Australia.

Ku, Harry S. and Puttgunta, V. C. and Trada, Mohan (2006) Young's modulus of vinyl ester composites cured by microwave irradiation: preliminary results. Journal of Electromagnetic Waves and Applications, 20 (14). pp. 1911-1924. ISSN 0920-5071

Wandel, Andrew P. ORCID: and Klimenko, Alexander Y. (2005) Testing multiple mapping conditioning mixing for Monte Carlo probability density function simulations. Physics of Fluids, 17 (12). pp. 128105-1. ISSN 1070-6631

Mossad, Ruth and Schillak, Thomas and Malli, Mike (2005) Numerical simulation of open refrigerated display cabinets. In: 3rd International Conference on Energy Research and Development (ICERD-3), 21-23 Nov 2005, Kuwait City, Kuwait.

Roache, Brody (2004) Heat transfer measurements of a re-entry capsule using fast response thermocouples. [USQ Project]

Lee, Andrew (2004) Numerical investigation of the temperature distribution in an industrial oven. [USQ Project]

Buttsworth, David R. and Jones, Terry V. (2003) High bandwidth stagnation temperature measurements in a Mach 6 gun tunnel flow. Experimental Thermal and Fluid Science, 27 (2). pp. 177-186. ISSN 0894-1777

Yusaf, Talal and Buttsworth, David R. and Deeth, Hilton C. (2003) Heat transfer in an ultrasonic processing cell: preliminary measurements. Emirates Journal of Agricultural Sciences , 15 (2). pp. 80-86. ISSN 2079-052X

Mai-Duy, Nam ORCID: and Tran-Cong, Thanh (2003) RBF interpolation of boundary values in the BEM for heat transfer problems. International Journal of Numerical Methods for Heat and Fluid Flow, 13 (5/6). pp. 611-632. ISSN 0961-5539

Ku, Harry S. and Siores, Elias and Ball, James A. R. (2001) Review - microwave processing of materials: part I. Transactions, Hong Kong Institution of Engineers, 8 (3). pp. 31-37. ISSN 1023-697X

Buttsworth, David R. (2001) A finite difference routine for the solution of transient one dimensional heat conduction problems with curvature and varying thermal properties. Technical Report. University of Southern Queensland , Toowoomba, Australia. [Report]

Ku, H. S. and Siu, F. and Siores, E. and Ball, J. A. R. and Blicblau, A. S. (2001) Applications of fixed and variable frequency microwave (VFM) facilities in polymeric materials processing and joining. In: 5th Asia Pacific Conference on Materials Processing, 25 Jun 2001, Seoul, Korea.

Strunin, D. V. and Melnik, R. V. N. and Roberts, A. J. (2001) Coupled thermomechanical waves in hyperbolic thermoelasticity. Journal of Thermal Stresses, 24 (2). pp. 121-140. ISSN 0149-5739

Taylor, J. A. and Wang, H. and StJohn, D. H. and Bainbridge, I. F. (2001) Anomalous grain coarsening behaviour observed in grain-refined aluminium alloy cast using low superheat. In: 130th TMS Annual MeetingLight Metals 2001, 11-15 Feb 2001, New Orleans, Louisanna.

Ku, H. S. and Ball, J. A. R. and Siores, E. (2000) Relationship between microwave irradiation and constituents of composites during joining process. Transactions Hong Kong Institution of Engineers , 7 (3). pp. 43-49. ISSN 1023-697X

This list was generated on Thu Dec 1 06:25:25 2022 AEST.