Browse by Fields of Research (ANZSRC 2008)

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Number of items at this level: 24.

Ghabraie, Kazem (2015) An improved soft-kill BESO algorithm for optimal distribution of single or multiple material phases. Structural and Multidisciplinary Optimization, 52 (4). pp. 773-790. ISSN 1615-147X

Ghabraie, Kazem (2015) An improvement technique for bi-directional evolutionary structural optimisation (BESO) method. In: 11th World Congress on Structural and Multidisciplinary Optimisation: Advances in Structural and Multidisciplinary Optimization (WCSMO-11), 7-12 June 2015, Sydney, Australia.

Li, Qiang and Hua, Fuan and Li, Jianping and Wang, Hao (2015) Research difference of strain distribution and microstructure evolution between rolling direction and transverse direction of AM50 Mg alloy plate by digital image correlation. Advances in Materials Science and Engineering, 2015. ISSN 1687-8434

Strunin, D. V. (2014) On dissipative nature of elastic waves. Journal of Coupled Systems and Multiscale Dynamics, 2 (2). pp. 70-73. ISSN 2330-152X

Banerjee, Sourish (2014) On the mechanical properties of hierarchical lattices. Mechanics of Materials, 72. pp. 19-32. ISSN 0167-6636

Orange, Lachlan (2013) Projectile impacts on hardened alloy steel plate. [USQ Project]

Albdiry, Mushtaq T. and Yousif, Belal F. and Ku, Harry (2013) Fracture toughness and toughening mechanisms of unsaturated polyester-based clay nanocomposites. In: 13th International Conference on Fracture (ICF 2013) , 16-21 Jun 2013, Beijing, China.

Zhuge, Yan (2013) A review of aerogels and their application as a multi-functional building material. Applied Mechanics and Materials, 253-255. pp. 564-567. ISSN 1660-9336

du Preez, Matthew (2012) Simulation of monolayer distribution for use in evaporation reduction. [USQ Project]

Meor Said, Mior Azman (2012) In-cylinder radiation heat transfer in a small direct injection diesel engine. [Thesis (PhD/Research)]

Banerjee, Sourish (2011) Creep response of polymeric honeycombs. In: 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX) , 14-17 Jan 2011, Auckland, New Zealand.

Banerjee, S. and Battley, M. and Bhattacharyya, D. (2010) Shear strength optimization of reinforced honeycomb core materials. Mechanics of Advanced Materials and Structures, 17 (7). pp. 542-552. ISSN 1537-6494

Rao, Sanjeev and Banerjee, Sourish and Jayaraman, Krishnan and Bhattacharyya, Debes (2010) Compressive behavior of fibre reinforced honeycomb cores. In: 2008 IUTAM Symposium on Multi-Functional Material Structures and Systems, 10-12 Dec 2008, Bangalore, India.

Nasir, T. and Yousif, B. F. and McWilliam, S. and Salih, N. D. and Hui, L. T. (2010) An artificial neural network for prediction of the friction coefficient of multi-layer polymeric composites in three different orientations. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (2). pp. 419-429. ISSN 0954-4062

Wong, K. J. and Yousif, B. F. and Low, K. O. and Ng, Y. and Tan, S. L. (2010) Effects of fillers on the fracture behaviour of particulate polyester composites. Journal of Strain Analysis for Engineering Design, 45 (1). pp. 67-78. ISSN 0309-3247

Gill, N. Singh and Yousif, B. F. (2009) Wear and frictional performance of betelnut fibre-reinforced polyester composite. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (2). pp. 183-194. ISSN 1350-6501

Yousif, B. F. (2009) Frictional and wear performance of polyester composites based on coir fibres. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (1). 51 -59. ISSN 1350-6501

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Leonard, L. W. H. and Wong, K. J. and Low, K. O. and Yousif, B. F. (2009) Fracture behaviour of glass fibre-reinforced polyester composite. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 223 (2). pp. 83-89. ISSN 1464-4207

UNSPECIFIED Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao, eds. (2009) Futures in mechanics of structures and materials: proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), Toowoomba, Australia, 2-5 December 2008. Taylor & Francis (CRC Press) , London, United Kingdom . ISBN 978-0-415-49196-9

Goh, S. and Ku, H. and Ang, S. L. (2008) Prediction of crushing stress in composite materials. Journal of Composite Materials, 42 (5). pp. 467-484. ISSN 0021-9983

Khennane, Amar and Tran-Cong, Thanh (2007) Timoshenko beam-solution in terms of integrated radial basis functions. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

Ahfock, Tony L. and Hewitt, Andrew (2005) Modeling of the solid rotor induction motor. In: AUPEC 2005: 15th Australasian Universities Power Engineering Conference, 25-28 Sep 2005, Hobart, Australia.

Baker, Graham (2005) Thermodynamics in solid mechanics: a commentary. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, A363 (1836). pp. 2465-2477. ISSN 1471-2962

This list was generated on Thu Jul 28 03:15:47 2016 EST.