Browse by Fields of Research (ANZSRC 2008)

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Number of items at this level: 103.

Javazmi, Leila and Khoddami, Akbar and Mazrouei-Sebdani, Zahra and Shams-Ghahfarokhi, Farzaneh and Low, Tobias (2017) Fabrication of a silica aerogel and examination of its hydrophobic properties via contact angle and 3M water repellency tests. In: 2017 5th International Conference on Nano and Materials Engineering (ICNME 2017), 1-3 April 2017, Bali, Indonesia.

Dau, V. T. and Tran, C. D. and Bui, T. T. and Nguyen, V. D. X. and Dinh, T. X. (2016) Piezo-resistive and thermo-resistance effects of highly-aligned CNT based macrostructures. RSC Advances, 6. pp. 106090-106095.

Yao, Xiao and Yang, Tao and Zhang, Zuhua (2016) Compressive strength development and shrinkage of alkali-activated fly ash–slag blends associated with efflorescence. Materials and Structures, 49 (7). pp. 2907-2918. ISSN 1359-5997

Zou, Yi-Chao and Chen, Zhi-Gang and Kong, Fantai and Lin, Jing and Drennan, John and Cho, Kyeongjae and Wang, Zhongchang and Zou, Jin (2016) Planar Vacancies in Sn1-xBixTe Nanoribbons. ACS Nano, 10 (5). pp. 5507-5515. ISSN 1936-0851

Hong, Min and Chasapis, Thomas C. and Chen, Zhi Gang and Yang, Lei and Kanatzidis, Mercouri G. and Snyder, G. Jeffrey and Zou, Jin (2016) n-type Bi2Te3-xSex nanoplates with enhanced thermoelectric efficiency driven by wide-frequency phonon scatterings and synergistic carrier scatterings. ACS Nano, 10 (4). pp. 4719-4727. ISSN 1936-0851

Sattary, Sattar and Thorpe, David (2016) Potential carbon emission reductions in Australian construction systems through bioclimatic principles. Sustainable Cities and Society, 23. pp. 105-113. ISSN 2210-6707

Sun, Jiajia and Wang, Chengrui and Zeng, Li and Xu, Pengfei and Yang, Xiaodan and Chen, Jun and Xing, Xianran and Jin, Quan and Yu, Ranbo (2016) Controllable assembly of CeO2 micro/nanospheres with adjustable size and their application in Cr(VI) adsorption. Materials Research Bulletin, 75. pp. 110-114. ISSN 0025-5408

Zhou, Wei and Yan, Chunjie and Duan, Ping and Liu, Yi and Zhang, Zuhua and Qiu, Xiumei and Li, Dan (2016) A comparative study of high- and low-Al2O3 fly ash based-geopolymers: the role of mix proportion factors and curing temperature. Materials and Design , 95. pp. 63-74. ISSN 0264-1275

Liu, Yi and Yan, Chunjie and Zhang, Zuhua and Wang, Hongquan and Zhou, Sen and Zhou, Wei (2016) A comparative study on fly ash, geopolymer and faujasite block for Pb removal from aqueous solution. Fuel, 185. pp. 181-189. ISSN 0016-2361

Misnon, Mohd Iqbal (2016) Development of hemp fabric reinforced composites. [Thesis (PhD/Research)]

Huang, Guobo and Song, Pingan and Liu, Lina and Han, Deman and Ge, Changhua and Li, Rongrong and Guo, Qipeng (2016) Fabrication of multifunctional graphene decorated with bromine and nano-Sb2O3 towards high-performance polymer nanocomposites. Carbon, 98. pp. 689-701. ISSN 0008-6223

Hashempour, Javad (2016) Investigating potential of metal mesh to contain wildfires. [Thesis (PhD/Research)]

Ma, Xue and Zhang, Zuhua and Wang, Aiguo (2016) The transition of fly ash-based geopolymer gels into ordered structures and the effect on the compressive strength. Construction and Building Materials, 104. pp. 25-33. ISSN 0950-0618

Zhang, Enze and Liu, Yanwen and Wang, Weiyi and Zhang, Cheng and Zhou, Peng and Chen, Zhi Gang and Zou, Jin and Xiu, Faxian (2015) Magnetotransport properties of Cd3As2 nanostructures. ACS Nano, 9 (9). pp. 8843-8850. ISSN 1936-0851

Chen, Zhi Gang and Zhang, Cheng and Zou, Yichao and Zhang, Enze and Yang, Lei and Hong, Min and Xiu, Faxian and Zou, Jin (2015) Scalable growth of high mobility dirac semimetal Cd3As2 microbelts. Nano Letters, 15 (9). pp. 5830-5834. ISSN 1530-6984

Liu, Shanshan and Yuan, Xiang and Wang, Peng and Chen, Zhi Gang and Tang, Lei and Zhang, Enze and Zhang, Cheng and Liu, Yanwen and Wang, Weiyi and Liu, Cong and Chen, Chen and Zou, Jin and Hu, Weida and Xiu, Faxian (2015) Controllable growth of vertical heterostructure GaTexSe1-x/Si by molecular beam epitaxy. ACS Nano, 9 (8). pp. 8592-8598. ISSN 1936-0851

Logitharan, Lokanantham R. and Somasundaraswaran, Kathirgamalingam and Ramanujam, Jothi M. (2015) Rehabilitation works in Queensland using foamed bituminous stabilisation. International Journal of GEOMATE, 8 (2 (16)). pp. 1308-1315. ISSN 2186-2982

Kadri, Atikah and Jia, Yi and Chen, Zhigang and Yao, Xiangdong (2015) Catalytically enhanced hydrogen sorption in Mg-MgH2 by coupling vanadium-based catalyst and carbon nanotubes. Materials, 8 (6). pp. 3491-3507.

Yao, Xiang and Yang, Xiaodan and Yu, Ranbo and Xu, Pengfei and Chen, Jun and Xing, Xianran (2015) Controlled synthesis and properties of porous Cu/CeO2 microspheres. Materials Research Bulletin, 61. pp. 22-25. ISSN 0025-5408

Logitharan, R. L. and Somasundaraswaran, K. and Ramanujam, J. M. (2015) Recent design strategies adapted for foamed bituminous stabilisation in flexible pavement rehabilitation works in Queensland. In: 14th Conference of the International Association for Computer Methods and Recent Advances in Geomechanics (IACMAG 2014), 22-25 Sep 2014, Kyoto, Japan.

Lembo, Kurt and Lokuge, Weena and Karunasena, Warna (2014) Geopolymer concrete with FRP confinement. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 9-12 Dec 2014, Byron Bay, Australia.

Logitharan, Lokanantham and Somasundaraswaran, Kathirgamalingam and Ramanujam, Jothi M. (2014) Recent foamed bituminous stabilisation works in Queensland. In: 4th International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2014), 19-21 Nov 2014, Brisbane, Australia.

Neumann, Philip M. and Somasundaraswaran, Kathirgamalingam (2014) Evaluation of strength characteristics of recycled asphalt pavement materials. In: 26th Australian Road Research Board Conference (ARRB 2014): Research Driving Efficiency, 19-22 Oct 2014, Sydney, Australia.

Knight, Tracey Anne (2014) Alkali-silica reaction in concrete bridge piles: treatment and strengthening with fibre-reinforced polymers. [USQ Project]

O'Callaghan, Adam (2014) An analysis of roadbase materials used in foamed bitumen stabilisation. [USQ Project]

Rosas, Angela Beatriz Rodriques (2014) Experimental investigation on the alkali silica reaction effect on concrete strength degradation. [USQ Project]

Nguyen, Liem (2014) Investigation in failure analysis and materials selection in total hip replacement prosthesis. [USQ Project]

Holzner, Katherine (2014) Rigid central safety barriers in constrained road environment. [USQ Project]

Light, Brenton (2014) Terrestrial laser scanning for building information modelling (BIM) development and application. [USQ Project]

Yu, Wei Hua and Ren, Qian Qian and Tong, Dong Shen and Zhou, Chun Hui and Wang, Hao (2014) Clean production of CTAB-montmorillonite: formation mechanism and swelling behavior in xylene. Applied Clay Science, 97-98. pp. 222-234. ISSN 0169-1317

Bajracharya, Rohan Muni and Manalo, Allan and Karunasena, Karu and Lau, Kin-tak (2014) Glass-fibre reinforced recycled mixed plastics (GMP): totally recyclable and renewable composites. In: IEEE Australia and New Zealand Student and Young Professional Congress (ANZSCON 2014), 3-5 Jul 2014, Brisbane, Australia.

Albdiry, M. T. and Yousif, B. F. (2014) Role of silanized halloysite nanotubes on structural, mechanical properties and fracture toughness of thermoset nanocomposites. Materials and Design, 57. pp. 279-288. ISSN 0264-1275

Banerjee, Sourish (2014) On the mechanical properties of hierarchical lattices. Mechanics of Materials, 72. pp. 19-32. ISSN 0167-6636

Reed, Mark and Lokuge, Weena and Karunasena, Warna (2014) Fibre reinforced geopolymer concrete with ambient curing for in-situ applications. Journal of Materials Science, 49 (12). pp. 4297-4304. ISSN 0022-2461

Wang, Wentai and Chakrabarti, Sandip and Chen, Zhigang and Yan, Zifeng and Tade, Moses O. and Zou, Jin and Li, Qin (2014) A novel bottom-up solvothermal synthesis of carbon nanosheets. Journal of Materials Chemistry A, 2 (7). pp. 2390-2396. ISSN 2050-7488

Zong, Lingbo and Wang, Zumin and Yu, Ranbo and Xu, Pengfei and Wang, Jiali and Deng, Jinxia and Chen, Jun and Xing, Xianran (2014) Controlled synthesis of Y2O3 nanoplates with improved performance. Journal of Nanoparticle Research, 16 (3). ISSN 1388-0764

Dong, Zhenghong and Ren, Hao and Hessel, Colin M. and Wang, Jiangyan and Yu, Ranbo and Jin, Quan and Yang, Mei and Hu, Zhudong and Chen, Yunfa and Tang, Zhiyong and Zhao, Huijun and Wang, Dan (2014) Quintuple-shelled Sno2 hollow microspheres with superior light scattering for high-performance dye-sensitized solar cells. Advanced Materials, 26 (6). pp. 905-909. ISSN 0935-9648

Hu, Lei and Chen, Jun and Pan, Zhao and Deng, Jinxia and Yu, Ranbo and Xing, Xianran (2014) Large-scale synthesis of isotropic single-crystalline ScF3 cubes by hydrothermal method. Journal of the American Ceramic Society, 97 (5). pp. 1386-1388. ISSN 0002-7820

Hu, Lei and Chen, Jun and Fan, Longlong and Deng, Jinxia and Yu, Ranbo and Xing, Xianran (2014) Rapid molten salt synthesis of isotropic negative thermal expansion ScF3. Journal of the American Ceramic Society, 97 (4). pp. 1009-1011. ISSN 0002-7820

Albdiry, Mushtaq Taleb Ali (2014) Role of silanised halloysite nanotubes on the morphological and materials characteristics of thermoset composites. [Thesis (PhD/Research)]

Lokuge, Weena and Aravinthan, Thiru (2013) Comparative assessment of polymer concrete with different types of resin. In: Concrete 2013: Understanding Concrete , 16-18 Oct 2013, Gold Coast, Australia.

Tran, Canh-Dung (2013) Dry spinning carbon nanotubes into continuous yarns: progress, processing and applications. In: Nanotube superfiber materials: changing engineering design. Elsevier, Oxford, United Kingdom, pp. 211-242. ISBN 978-1-4557-7863-8

Wu, Long and Yang, Bing Xing and Yang, Xiao Hua and Chen, Zhi Gang and Li, Zhen and Zhao, Hui Jun and Gong, Xue Qing and Yang, Hua Gui (2013) On the synergistic effect of hydrohalic acids in the shape-controlled synthesis of anatase TiO2 single crystals. CrystEngComm, 15 (17). pp. 3252-3255.

Guades, Ernesto Jusayan (2013) Behaviour of glass FRP composite tubes under repeated impact for piling application. [Thesis (PhD/Research)]

Wang, Jing and Sutti, Alessandra and Lin, Tong and Wang, Xungai (2013) Thermo-responsive PNIPAM Hydrogel nanofibres photocrosslinked by Azido-POSS. In: Fiber Society Spring 2013 Technical Conference: Advancing Scientific Knowledge pertaining to Fibers and Fibrous Materials, 22-24 May 2013, Geelong, Australia.

Xu, Pengfei and Yu, Ranbo and Zong, Lingbo and Wang, Jiali and Wang, Dan and Deng, Jinxia and Chen, Jun and Xing, Xianran (2013) Phase evolution and photoluminescence enhancement of CePO4 nanowires from a low phosphate concentration system. Journal of Nanoparticle Research, 15 (5). ISSN 1388-0764

Kadri, Atikah and Jia, Yi and Chen, Zhigang and Yao, XiangDong (2013) Effect of titanium based complex catalyst and carbon nanotubes on hydrogen storage performance of magnesium. Science China Chemistry, 56 (4). pp. 451-458. ISSN 1674-7291

Thota, N. M. and Epaarachchi, J. A. and Lau, K. T. (2013) Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

Manthey, Nathan William (2013) Development of hemp oil based bioresins for biocomposites. [Thesis (PhD/Research)]

Li, Wenbin and Jiang, Peiqing and Wang, Xin and Li, Gaowen and Xu, Weilin (2013) Experimental investigation on the surface humidity of fabric during the process of dynamic moisture liberation. International Journal of Clothing Science and Technology, 25 (6). pp. 451-456. ISSN 0955-6222

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2013) Properties and behaviour of gomuti fibre composites under tensile and compressive load. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Bolt, Jason. R. (2013) The impact of photocatalytic TiO2 on permeable concrete mix designs and its application for the degradation of organic pollutants in water. [Thesis (PhD/Research)]

Manalo, Allan and Aravinthan, Thiru (2012) Peer assisted learning in an online postgraduate course on engineered fibre composites. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

Yan, Xuecheng and Yu, Ranbo and Xu, Yali and Li, Li and Xu, Pengfei and Wang, Dan and Deng, Jinxia and Chen, Jun and Xing, Xianran (2012) Morphology-tailored synthesis of flower-like Y 2O 3:Eu3+ microspheres. Materials Research Bulletin, 47 (9). pp. 2135-2139. ISSN 0025-5408

Wu, Xia and Liu, Jian and Chen, Zhigang and Lu, Gaoqing and Wang, Lianzhou and Yang, Qihua and Li, Can (2012) Amino acid assisted synthesis of mesoporous TiO 2 nanocrystals for high performance dye-sensitized solar cells. Journal of Materials Chemistry, 22 (21). pp. 10438-10440. ISSN 2050-7488

Wang, Yong and Xiu, Faxian and Cheng, Lina and He, Liang and Lang, Murong and Tang, Jianshi and Kou, Xufeng and Yu, Xinxin and Jiang, Xiaowei and Chen, Zhigang and Zou, Jin and Wang, Kang L. (2012) Gate-controlled surface conduction in Na-doped Bi2Te3 topological insulator nanoplates. Nano Letters, 12 (3). pp. 1170-1175. ISSN 1530-6992

Tawfik, Qaidar H. (2012) Rehabilitation of deteriorated steel truss members using CFRP. [Thesis (PhD/Research)]

Kim, Jung Hyuk and Moon, So Ra and Yoon, Hyun Sik and Jung, Jae Hun and Kim, Yong and Chen, Zhi Gang and Zou, Jin and Choi, Duk Yong and Joyce, Hannah J. and Gao, Qiang and Tan, H. Hoe and Jagadish, Chennupati (2012) Taper-free and vertically oriented Ge nanowires on Ge/Si substrates grown by a two-temperature process. Crystal Growth and Design, 12 (1). pp. 135-141. ISSN 1528-7483

Wang, Xuewen and Liu, Gang and Wang, Lianzhou and Chen, Zhi-Gang and Lu, Gao Qing and Cheng, Hui-Ming (2012) ZnO-CdS@Cd heterostructure for effective photocatalytic hydrogen generation. Advanced Energy Materials, 2 (1). pp. 42-46. ISSN 16146832

Hussin, Manal (2012) An investigation into the effect of material composition on the fundamental properties of permeable concrete. [Thesis (PhD/Research)]

Hussin, Manal and Zhuge, Yan and Bullen, Frank and Lokuge, Weena (2012) Investigation of some fundamental properties of permeable concrete. In: International Conference on Emerging Materials and Mechanics Applications (ICEMMA 2012): , 5-6 Feb 2012, Hangzhou, China.

Wu, Xia and Max Lu, Gao Qing and Wang, Lianzhou and Chen, Zhigang (2011) Nanosized anatase TiO2 single crystals with tunable exposed (001) facets for enhanced energy conversion efficiency of dye-sensitized solar cells. Advanced Functional Materials, 21 (21). pp. 4167-4172. ISSN 1616-301X

Xia, Zhigang and Wang, Xin and Ye, Wenxiang and Xu, Weilin and Eltahir, Hafiz A. (2011) Effect of repeated winding on carded ring cotton yarn properties. Fibers and Polymers, 12 (4). pp. 534-540. ISSN 1229-9197

Ku, H. and Wong, P. and Maxwell, A. and Huang, J. and Fung, H. and Mohan, T. (2011) A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2011) Experimental investigation into gomuti fibres/polyester composites. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Hussin, Manal and Zhuge, Yan and Bullen, Frank and Lokuge, Weena (2011) Laboratory evaluation of the stress-strain relationship of permeable concrete. Advanced Materials Research, 243-24. pp. 3259-3262. ISSN 1022-6680

Goh, Steven C. and Wang, Hao, eds. (2010) Proceedings of the 2010 Southern Region Engineering Conference (SREC 2010). Engineers Australia, Toowoomba, Australia.

Lian, C. and Zhuge, Y. (2010) Optimum mix design of enhanced permeable concrete: an experimental investigation. Construction and Building Materials, 24 (12). pp. 2664-2671. ISSN 0950-0618

Zhuge, Y. (2010) FRP-retrofitted URM walls under in-plane shear: review and assessment of available models. Journal of Composites for Construction, 14 (6). pp. 743-753. ISSN 1090-0268

Abeysekera, Vasantha (2010) Output characteristics of 'Chapparu' brickwork. Engineer: Journal of the Institution of Engineers, Sri Lanka, 43 (4). pp. 57-74. ISSN 1800-1122

Thorpe, David and Zhuge, Yan (2010) Advantages and disadvantages in using permeable concrete as a pavement construction material. In: ARCOM 2010: 26th Annual Conference of the Association of Researchers in Construction Management, 6-8 Sep 2010, Leeds, United Kingdom.

Nirmal, Umar and Yousif, B. F. and Rilling, Dirk and Brevern, P. V. (2010) Effect of betelnut fibres treatment and contact conditions on adhesive wear and frictional performance of polyester composites. Wear, 268 (11-12). pp. 1354-1370. ISSN 0043-1648

Yousif, B. F. and El-Tayeb, N. S. M. (2010) Wet adhesive wear characteristics of untreated oil palm fibre-reinforced polyester and treated oil palm fibre-reinforced polyester composites using the pin-on-disc and block-on-ring techniques. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 224 (2). pp. 123-131. ISSN 1350-6501

Su, Ying and Huang, Jinghua and Al-Hakim, Latif (2010) A methodology to assure measurement data quality for key engineering materials. Advanced Materials Research, 108-11 (1). pp. 972-978. ISSN 1022-6680

Al-Haddad, A. A. and Salih, Nbhan D. and Wen, Chin Chee and Yusaf, T. F. and Yousif, B. F. (2010) New technique measuring film thickness for tribological machines. In: 2009 ASME International Mechanical Engineering Congress and Exposition, 13-19 Nov 2009, Lake Buena Vista, FL. United States.

Wong, K. J. and Yousif, B. F. and Low, K. O. (2010) The effects of alkali treatment on the interfacial adhesion of bamboo fibres. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 224 (3). pp. 139-148. ISSN 1464-4207

Cardona, F. and Rogers, D. and Gurney, R. and Trada, M. and Ku, H. (2009) Flexural tests of phenol formaldehyde and SLG composites: pilot study. Journal of Reinforced Plastics and Composites, 28 (22). pp. 2761-2769. ISSN 0731-6844

Zhuge, Yan and Lian, Chunqi (2009) Development of environmentally friendly and structural enhanced permeable concrete pavement material. In: 2009 Southern Engineering Conference: Infrastructure Investment For a New Economy, 17-18 Oct 2009, Springfield, Qld, Australia.

Gill, N. Singh and Yousif, B. F. (2009) Wear and frictional performance of betelnut fibre-reinforced polyester composite. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (2). pp. 183-194. ISSN 1350-6501

Yousif, B. F. (2009) Frictional and wear performance of polyester composites based on coir fibres. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (1). 51 -59. ISSN 1350-6501

Leonard, L. W. H. and Wong, K. J. and Low, K. O. and Yousif, B. F. (2009) Fracture behaviour of glass fibre-reinforced polyester composite. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 223 (2). pp. 83-89. ISSN 1464-4207

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao, eds. (2009) Futures in mechanics of structures and materials: proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), Toowoomba, Australia, 2-5 December 2008. Taylor & Francis (CRC Press), London, United Kingdom. ISBN 978-0-415-49196-9

Chin, C. W. and Yousif, B. F. (2009) Potential of kenaf fibres as reinforcement for tribological applications. Wear, 267 (9-10). pp. 1550-1557. ISSN 0043-1648

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao (2009) Preface to futures in mechanics of structures and materials conference. ACMSM20. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Zhu, Huajun and Yao, Xiao and Zhang, Zuhua and Hua, Sudong and Chen, Yue (2008) Study on the activation of calcined kaolin. Cailiao Kexue yu Gongyi (Material Science and Technology), 16 (S1). pp. 126-129. ISSN 1005-0299

Liang, Q. Q. and Hadi, M. N. S. (2008) Nonlinear analysis and behavior of concrete-filled steel tubular beam-columns. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Yok Meng, Tan (2007) Design of a microclimate ventilation system. [USQ Project]

Walker, Craig Louis (2006) Local and post-local buckling of steel tubes in thin-walled circular concrete-filed steel tubular columns. [USQ Project]

Ang, Soon Lim (2006) Predicting the crushing stress of composite materials. [USQ Project]

Chiu, Kwong Man Karen (2006) The use of recycled concrete aggregate in structural concrete around South East Queensland. [USQ Project]

He, Mingqian Belinda (2006) Analysis of the recycling method for aluminum soda cans. [USQ Project]

Yao, X. and Wang, H. and He, B. and Zhou, X. (2006) Numerical simulation of dendrite growth during solidification. International Journal of Nonlinear Sciences and Numerical Simulation, 7 (2). pp. 171-176. ISSN 1565-1339

Lee, Kwan Shing (2005) Fracture analysis of vinyl ester composites under microwave condition. [USQ Project]

Choi, Richard Fun Yiu (2005) Review of the jet grouting method. [USQ Project]

French, Vivienne Joyce (2005) The investigation into modes of failure of total hip replacements. [USQ Project]

Taylor, Brett C. (2004) Assessment of appropriate pressure vessel flange bolt tension by finite element modelling. [USQ Project]

Islam, Md Mainul and Ali, Md Nawsher and Mia, Sobahan (2004) Evaluation of the properties of raw materials and products of briquetting machine. In: 2nd BSME-ASME International Conference on Thermal Engineering, 2-4 Jan 2004, Dhaka, Bangladesh.

Wang, Hao and Zou, Jin and Zhang, M. X., eds. (2004) Advanced materials science and engineering: 2004 Australia-China Materials Science Symposium, 22nd-25th October 2004, Brisbane, Australia: [special theme issue of] Journal of Materials Science & Technology, Vol. 20, Suppl. 1, 2004. Zhongguo Kexueyuan, Jinshu Yanjiusuo, China. ISBN 1005-0302

Aravinthan, Thiru and Sabonchy, Erdal and Heldt, Tim (2004) Application of external post-tensioning for strengthening of headstocks (bent-caps) in bridges. In: CONSEC'04: Environment and Loading , 27-30 Jun 2004, Seoul, South Korea.

Hughes, Warren and Karunasena, Warna (2004) Factors affecting debonding of FRP (fiber-reinforced polymer) rehabilitated concrete beams. In: 3rd International Conference on Advances in Structural Engineering and Mechanics (ASEM 2004), 2-4 Sept 2004, Seoul, South Korea.

Wang, Hao (2003) Present status and future trends in production of semisolid materials. Tezhong Zhuzao Ji Youse Hejin (Special Casting and Nonferrous Alloys), 131. pp. 332-334. ISSN 1001-2249

Ku, H. S. and Siu, F. and Siores, E. and Ball, J. A. R. (2002) Applications of fixed and variable frequency microwave (VFM) facilities in polymeric materials processing and joining. In: 2nd World Engineering Congress (WEC 2002), 22-25 Jul 2002, Kuching, Malaysia.

Ku, H. S. and Siu, F. and Mok, P. L. and Siores, E. and Ball, J. A. R. (2002) Characterisation of chip-on-board (COB) encapsulate epoxies used in the printed circuit board assembly (PCBA) industry using variable frequency microwave (VFM) facilities. In: 2nd World Engineering Congress (WEC 2002), 22-25 Jul 2002, Sarawak, Malaysia.

This list was generated on Wed Oct 18 02:03:48 2017 AEST.