|Up a level|
Ma, Xue and Li, Liangfeng and Zhang, Zuhua and Wang, Hao and Wang, Enze and Qiu, Tai (2015) Effects of rare earth La on microstructure and properties of Ag-21Cu-25Sn alloy ribbon prepared by melt spinning. Materials and Design, 83. pp. 1-5. ISSN 0264-1275
Li, L. F. and Cheng, Y. K. and Xu, G. L. and Wang, E. Z. and Zhang, Z. H. and Wang, H. (2014) Effects of indium addition on properties and wettability of Sn–0.7Cu–0.2Ni lead-free solders. Materials and Design, 64. pp. 15-20. ISSN 0264-1275
Wang, Ling Yun and Tong, Dong Shen and Zhao, Li Zhi and Liu, Feng Guo and An, Ning and Yu, Wei Hua and Zhou, Chun Hui (2014) Utilization of alum sludge for producing aluminum hydroxide and layered double hydroxide. Ceramics International, 40 (10). pp. 15503-15514. ISSN 0272-8842
Alotaibi, J. G. and Yousif, B. F. and Yusaf, T. F. (2014) Wear behaviour and mechanism of different metals sliding against stainless steel counterface. Journal of Engineering Tribology, 228 (6). pp. 692-704. ISSN 1350-6501
Albdiry, M. T. and Yousif, B. F. (2014) Effect of SiC addition on mechanical and wear characteristics of WC-32(W-Ti)C-6Co cemented carbides. International Journal of Precision Technology, 4 (1/2). pp. 110-121. ISSN 1755-2060
Alotaibi, J. G. and Yousif, B. F. and Yusaf, T. F. (2014) Wear and frictional behaviour of metals. In: 3rd International Conference on Advanced Materials and Engineering Materials (ICAMEM 2013), 14-15 Dec 2013, Singapore .
Liu, Hui-min and Li, Zhi-peng and Wang, Hao (2013) Effect of in-situ TiC particles on hot deformation behavior of spray formed 7075 Al alloy. Transactions of Materials and Heat Treatment (Cailiao Rechuli Xuebao), 34 (S2). pp. 173-178. ISSN 1009-6264
Yu, Bao Yi and Wang, Qing and Li, Qiang and Wu, Yu Juan and Chen, Yan (2013) Interface microstructure and mechanical properties of copper/aluminum composite material. In: 3rd International Conference on Advanced Engineering Materials and Technology (AEMT 2013), 11-12 May 2013, Zhangjiajie, China.
Etaati, Amir and Dehghani, Kamran (2013) A study on hot deformation behavior of Ni-42.5Ti-7.5Cu alloy. Materials Chemistry and Physics, 140 (1). pp. 208-215. ISSN 0254-0584
Etaati, Amir and Dehghani, Kamran and Ebrahimi, G. R. and Wang, Hao (2013) Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations. Metals and Materials International, 19 (1). pp. 5-9. ISSN 1598-9623
Ma, Yingqun and Si, Chunhua and Lin, Chuxia (2012) Comparison of copper scavenging capacity between two different red mud types. Materials, 5 (9). pp. 1708-1721.
Easton, Mark A. and Wang, Hao and Grandfield, John and Davidson, Cameron J. and StJohn, David H. and Sweet, Lisa D. and Couper, Malcolm J. (2012) Observation and prediction of the hot tear susceptibility of ternary Al-Si-Mg alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science , 43 (9). pp. 3227-3238. ISSN 1073-5623
Albdiry, Mushtaq and Alethari, Haydar (2012) Effect of alumina inclusions on microstructure and mechanical properties of 62 WC, 32 (Ti-W) C and 6 Co compacts. International Journal of Microstructure and Materials Properties, 7 (4). pp. 329-340. ISSN 1741-8410
Mo, Chun-li and Li, Qiang and Guo, Xu-ming and Wang, Hao (2012) Numerical simulation the temperature field of the multi-coil batch during annealing process in Bell-type furnace. In: 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012), 6 Jul 2012, Zhuhai, China.
Tawfik, Qaidar H. (2012) Rehabilitation of deteriorated steel truss members using CFRP. [Thesis (PhD/Research)]
Xie, Shuisheng and Li, Xinggang and Wang, Hao and Zhang, Ying (2012) Semisolid processing technology. Metallurgical Industry Press, Beijing, China. ISBN 978-7-5024-5935-2
Wang, Hao and Shi, Zhiming (2011) In vitro biodegradation behavior of magnesium and magnesium alloy. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 98B (2). pp. 203-209. ISSN 1552-4973
Hua, Fuan and Zhang, Chaoyi and Li, Qiang and Yu, Baoyi and Liu, Weihua and Li, Runxia and Xie, Shuisheng and Huang, Guojie and Cheng, Lei and Fu, Yao and Wang, Hao (2011) Numerical simulation of rolling process and microstructure evolution of AM50 Mg alloy during hot rolling process. Advanced Materials Research, 291-294. pp. 449-454. ISSN 1022-6680
Tawfik, Qaidar and Karunasena, Warna (Karu) (2010) Use of CFRP for rehabilitation of steel structures: a review. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.
Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275
Ning, Z. L. and Wang, H. and Sun, J. F. (2010) Deformation behavior of semisolid A356 alloy prepared by low temperature pouring. Materials and Manufacturing Processes, 25 (7). pp. 648-653. ISSN 1042-6914
Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914
Li, Qiang and Yu, Baoyi and Zhang, Huawen and Li, Runxia and Wang, Feng and Xie, Shuisheng and Huang, Guojie and Wang, Hao (2010) Cellular automaton modeling of semisolid microstructure formation. China Foundry, 7 (2). pp. 143-148. ISSN 1672-6421
Lau, Sindy Mei-Ling and Lau, Kin-Tak and Yin, Yan-Sheng and Li, Lan and Wong, May and Chan, Kevin and Chen, William (2010) A shape memory alloy energy absorber for backpack design. Materials and Manufacturing Processes, 25 (4). pp. 281-286. ISSN 1042-6914
Wang, Hao (2010) The role of casting temperature in preparation of bulk metallic glasses. In: 6th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC 2009): Processing, Fabrication, Properties, Applications, 25-29 Aug 2009, Berlin, Germany.
Kuan, Siew Yeng (2009) Design, construction and operation of the floating roof tank. [USQ Project]
Zhu, Zhengwang and Zhang, Haifeng and Wang, Hao and Ding, Bingzhe and Hu, Zhuang-Qi and Huang, Han (2009) Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting [+ Erratum]. Journal of Materials Research, 24 (10). pp. 3108-3115. ISSN 0884-2914
Chen, Wei and Wang, H. and Zhang, Lei and Tang, Xiushan (2009) Development of hot drawing process for nitinol tube. International Journal of Modern Physics B, 23 (6/7). pp. 1968-1974. ISSN 0217-9792
Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.
Venkatesh, V. C. and Yousif, B. F., eds. (2009) International Journal of Precision Technology, Vol. 1, No. 2, 2009. Inderscience Enterprises Ltd., United Kingdom.
Wang, H. and Estrin, Y. and Zuberova, Z. (2008) Bio-corrosion of a magnesium alloy with different processing histories. Materials Letters, 62 (16). pp. 2476-2479. ISSN 0167-577X
Fu, H. M. and Qiu, D. and Zhang, M. X. and Wang, H. and Kelly, P. M. and Taylor, J. A. (2008) The development of a new grain refiner for magnesium alloys using the edge-to-edge model. Journal of Alloys and Compounds, 456 (1-2). pp. 390-394. ISSN 0925-8388
Wang, H. and Li, Q. (2008) Solidification microstructure modelling using cellular automaton method. In: International Conference on Frontiers in Materials Science and Technology (FMST 2008), 26-28 Mar 2008, Brisbane, Australia.
Wang, H. and Shi, Z. M. and Yang, K. (2008) Magnesium and magnesium alloys as degradable metallic biomaterials. In: International Conference on Frontiers in Materials Science and Technology (FMST 2008), 26-28 Mar 2008, Brisbane, Australia.
Gustafson, Adrian Mark (2007) Investigation of a new generation degradable implant material. [USQ Project]
Wang, H. and Estrin, Y. and Fu, H. M. and Song, G. L. and Zuberova, Z. (2007) The effect of pre-processing and grain structure on the bio-corrosion and fatigue resistance of magnesium alloy AZ31. Advanced Engineering Materials, 9 (11). pp. 967-972. ISSN 1438-1656
Ning, Zhiliang and Cao, P. and Wang, Hao and Sun, Jianfei and Liu, Diankun (2007) Effect of cooling conditions on grain size of AZ91 alloy. Journal of Materials Science and Technology, 23 (5). pp. 645-649. ISSN 1005-0302
Wang, Hao (2007) In-situ Si/Al composite produced by semisolid metal processing. Materials and Manufacturing Processes, 22 (5-6). pp. 696-699. ISSN 1042-6914
Ning, Zhiliang and Wu, Peilian and Wang, Hao and Cao, Fuyang and Sun, Jianfei (2007) Effect of pouring temperature on thixotropic microstructure formation of AZ91. Rare Metals, 26 (S1). pp. 180-184. ISSN 1001-0521
Le, Phong and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2007) A meshless IRBFN-based numerical simulation of dynamic strain localization in quasi-brittle materials. In: USNCCM9: 9th US National Congress on Computational Mechanics , 22-26 Jul 2007, San Francisco, CA, United States.
Ren, Yibin and Wang, Hao and Huang, Jingjing and Zhang, Bingchun and Yang, Ke (2007) Study of biodegradation of pure magnesium. In: ASBM7: 7th Asian Symposium on Biomedical Materials , 20-23 Aug 2006, Jeju, Korea.
Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2007) A practical thermodynamic method to calculate the best glass-forming composition for bulk metallic glasses. International Journal of Nonlinear Sciences and Numerical Simulation, 8 (2). pp. 171-178. ISSN 1565-1339
Wang, Hao and Ning, Zhiliang (2007) Magnesium thixotropic structure produced by controlled nucleation method. Tezhong Zhuzao Ji Youse Hejin (Special Casting and Nonferrous Alloys) (Sp. Is). pp. 316-319. ISSN 1001-2249
Fu, H. M. and Zhang, H. F. and Wang, Hao and Hu, Z. Q. (2007) Multifarious fracture features of CuZrAlGd(Ag) bulk metallic glasses. Advanced Materials Research, 29-30. pp. 47-50. ISSN 1022-6680
Walker, Craig Louis (2006) Local and post-local buckling of steel tubes in thin-walled circular concrete-filed steel tubular columns. [USQ Project]
Wang, Hao and Zhang, M. X. and Shi, Z. M. and Yang, Ke (2006) Biocorrosion behaviour of magnesium alloys under pseudo-physiological conditions. Tissue Engineering, 12 (4). p. 1067. ISSN 1076-3279
Wang, Hao (2006) In-situ Si/Al composite produced by semisolid metal processing. In: ACUN-5 International Composites Conference, 11-14 July 2006, Sydney, Australia.
Yao, X. and Wang, H. (2006) Modeling of semisolid structure formation in controlled nucleation method. International Journal of Modern Physics B, 20 (25-27). pp. 4123-4128. ISSN 0217-9792
Wang, Hao and Xu, Jun (2006) Semisolid casting of automotive component: water pump lid. Solid State Phenomena, 116-11. pp. 88-91. ISSN 1012-0394
Wang, H. and Yao, X. D. (2006) Semisolid structure simulation in controlled nucleation process. Solid State Phenomena, 116-11. pp. 614-617. ISSN 1012-0394
Fu, H. M. and Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2006) The effect of Gd addition on the glass-forming ability of Cu-Zr-Al alloy. Scripta Materialia, 55 (2). pp. 147-150. ISSN 1359-6462
Ning, Zhiliang and Wang, Hao and Sun, Jianfei (2006) The effect of initial microstructure of A356 alloys on the mechanical behavior in the semisolid state. Solid State Phenomena, 116-11. pp. 449-452. ISSN 1012-0394
Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2006) Tungsten fibre reinforced Zr-based bulk metallic glass composites. In: ACUN-5 International Composites Conference, 11-14 July 2006, Sydney, Australia.
Ren, Yibin and Huang, Jingjing and Yang, Ke and Zhang, Bingchun and Yao, Zhiming and Wang, Hao (2005) Study of bio-corrosion of pure magnesium. Acta Metallurgica Sinica (Jinshu Xuebao), 41 (11). pp. 1228-1232. ISSN 0412-1961
Janke, Scott (2005) Analysis of a sheet metal bucket elevator head. [USQ Project]
Liu, Weili and Zhang, H. F. and Hu, Z. Q. and Wang, Hao (2005) Formation and mechanical properties of Mg65Cu25Er10 and Mg65Cu15Ag10Er10 bulk amorphous alloys. Journal of Alloys and Compounds, 397 (1-2). pp. 202-206. ISSN 0925-8388
Liu, W. Y. and Zhang, H. F. and Hu, Z. Q. and Wang, H. and Yao, X. D. (2005) Fabrication of bulk amorphous Mg65Cu25Gd10 alloy of 12mm rod by water quenching. In: Magnesium – Science, Technology and Applications. Trans Tech Publications Inc., Zurich, Switzerland, pp. 211-214. ISBN 978-087849968-7
Wang, Hao (2005) Bulk metallic glass composites. Journal of Materials Science and Technology, 21 (s1). pp. 86-90. ISSN 1005-0302
Wang, Hao and Song, Xiaoping and Yao, Xiangdong and Zhang, Haifeng and Hu, Zhuangqui (2005) Crystallization behavior of (Cu60Zr30Ti10)99Sn1 bulk metallic glass. Journal of Materials Science & Technology, 21 (s 1). pp. 51-53. ISSN 1005-0302
Yao, X. and Wu, C. Z. and Wang, H. and Cheng, H. M. and Lu, G. Q. Max (2005) Hydrogen storage of magnesium-based nanocomposites system. Journal of Materials Science & Technology, 21 (s 1). pp. 57-60. ISSN 1005-0302
Yan, Wenyi (2005) Mechanics examination on the wear behaviour of shape memory alloys. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005): Advances in Applied Mechanics, 16-18 Feb 2005, Melbourne, Australia.
Wang, Hao (2005) Controlled nucleation method: a new process for semisolid metal forming. Special Casting and Non-ferrous Alloys (Tezhong Zhuzao Ji Youse Hejin) . pp. 195-200. ISSN 1001-2249
Yao, Xiangdong and Wang, Hao and He, B. and Zhou, X. (2005) Modeling of columnar-to-equiaxed transition in solidified Al-Si alloys. In: 5th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 5), 2-5 Nov 2004, Beijing, China.
Wang, Hao (2005) Semisolid structure formation and semisolid casting. Journal of Materials Science and Technology, 21 (s1). pp. 65-71. ISSN 1005-0302
Wang, Hao and Davidson, C. J. and StJohn, David H. (2004) Semisolid microstructural evolution of AlSi7Mg during partial remelting. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing , 368 (1-2). pp. 159-167. ISSN 0921-5093
Ouyang, L. Z. and Wang, Hao and Zhu, M. and Zou, Jin and Chung, C. Y. (2004) Microstructure of MmM5/Mg multi-layer hydrogen storage films prepared by magnetron sputtering. Microscopy Research and Technique, 64 (4). pp. 323-329. ISSN 1059-910X
Yan, Wenyi and Wang, Chun Hui and Zhang, Xin Ping and Mai, Yiu-Wing (2003) Theoretical modelling of the effect of plasticity on reverse transformation in superelastic shape memory alloys. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing , 354 (1-2). pp. 146-157. ISSN 0921-5093
Islam, Md Mainul and Watanabe, Taiji (2003) Crack opening behavior in aluminum alloy 5083. Journal of Mechanical Engineering, Institution of Engineers, Bangladesh, ME 32. pp. 26-35. ISSN 0379-4318
Wang, Hao (2003) Present status and future trends in production of semisolid materials. Tezhong Zhuzao Ji Youse Hejin (Special Casting and Nonferrous Alloys), 131. pp. 332-334. ISSN 1001-2249
Melnik, R. V. N. and Roberts, A. J. and Thomas, K. A. (2002) Phase transitions in shape memory alloys with hyperbolic heat conduction and differential-algebraic models. Computational Mechanics, 29 (1). pp. 16-26. ISSN 0178-7675
Melnik, R. V. N. and Roberts, A. J. and Thomas, K. A. (2000) Computing dynamics of copper-based SMA via center manifold reduction of 3D models. Computational Materials Science, 18 (3/4). pp. 255-268. ISSN 0927-0256
Melnik, R. V. N. and Roberts, A. J. and Thomas, K. A. (2000) Mathematical and numerical analysis of Falk-Konopka-type models for shape-memory alloys. International Journal of Differential Equations and Applications, 1A (3). pp. 291-300. ISSN 1311-2872