Browse by Centre

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type | Uncontrolled Keywords | Authors Name | No Grouping
1-lactic acid) (PLA) 20th Australasian Conference on the Mechanics of Structures and Materials 3-RCS 3-rib chest structure 33 percent by weight carbon-fibre-reinforced low density polyethylene [LDPE/CF (33%)] 33 percent by weight glass-fibre-reinforced low density polyethylene [LDPE/GF (33%)] 3D A. Sandwich structures A356 Al alloy A356 alloy A356 alloys ABAQUS abrasive wear absorbent ACMSM20 acoustic acoustic absorption acoustic emission acoustic noise acrylated epoxidized hemp oil activated carbon activating actuators additives ADFP adhesion adhesion wear adhesive wear adhesives ADR69 adsorption advanced manufacturing advanced robust AEHO aerodynamic aerogels aeroplanes aerospace structures AFM agglomeration aggregate agriculture Ag–Cu–Sn alloy AIP refinement airbag compatibility aircraft aircraft material aircraft safety airflow AIS Al-Si alloy alkali activated cement alkali activated material alkali activation alkali treated alkali treatment alkali-activated binders alkali-activated cement alkali-activated materials alkali-activated metakaolin (AAM) alkali-activation alkaline activation alloy alloy composition alloys AlSi7Mgn alternative assembly alternative materials alternative sleeper materials alumina alumina ceramics Aluminium aluminium fiber aluminium powder aluminium-silicon alloy aluminosilicates aluminum aluminum casting ambient curing ambient vibration amines amorphous iron oxide amorphous matrices analysis Analytic Hierarchy Process analytical chemistry Analytical model analytical modelling analytical predictions analytical results analytical techniques anchor head anchorage angle measurement animal fibre annealing ANSYS anthropomorphic test dummy antibacterial activity anticorrosion antimony telluride application applications applied voltages Araldite Araldite and carbon fibre arenga pinnata arenga pinnata fibre aromatic compounds articular cartilages articulation artificial neural network artificial neural network algorithm artificial neural networks Artificial Weathering as-cast AS1684 assessment assessment tools asymmetrical beam asymmetrical beam shear test asymmetrical beams ATL atomic force microscopes Atomic Force Microscopy atomic size Atomic Step ATR-FTIR AU catalysts Au thin films Australia Australian automated fibre Placement (AFP) automated manufacture automated model updating automation automobile parts average size axial B. Environmental degradation B. Thermomechanical back-propagation backpack load balsa bamboo bamboo charcoal bamboo fibre bamboo fibres band structures barnacles basalt fibre basalt meshes base catalyst baseball bast fibre batch reactor batteries battery storage beam beam cross section beam tests beams beams and girders behaviour bell-type furnace bending bending behaviour bending stiffness bending strength bending stress benzoxazine betelnut fibre betelnut fibres betz limit Bi2Se3 nanosheets Bi2Te3 Bi2Te3−xSex binary composites bio composite bio composites bio-based composite bio-based polymer bio-composites bio-corrosion bio-degradability bio-engineering bio-fidelity bio-materials bio-medical bio-resins biochemistry biocompatibility biocomposite biocomposites biocorrosion biocorrosion behaviour biodegradable biodegradable material biodegradable materials biodegradable plastic biodegradable plastics biodegradable properties biodegradation biofilm biomaterial biomaterials biomechanical surrogate biomedical applications biopolymers bioresin bioresins bioresorbability bioresorbable polymers biosensor bismuth selenide blade design blade loads blast simulation bleaching blend block loading blunt ballistic impacts blunt chest trauma blunt criterion blunt thoracic trauma blunt trauma BMG composites BMG matrix composites bolted joint bolted joints Bombyx mori Bond behaviour bond length bond mechanism bond strength bond-slip bonded AFRP sheets bonded joints bonding bonding materials bone bone implant bone properties bone repair bone tissue engineering boundary conditions bovine cortical bone box beam Bragg wavelength bridge bridge design bridge girder bridge girders bridge infrastructure bridge repair bridges brittleness broadband light sources buckling buckling theory building building construction building materials bulk amorphous alloy bulk amorphous alloys bulk metallic glass bulk metallic glass matrix composite bulk metallic glasses bulk volume bulk volume expansion bullbar buoyancy burning test cables CAFVM calcined kaolin calcined temperature calcium calibration calorimetry cannabinoids capacity carbide tools carbon carbon fiber reinforced platics carbon fibre carbon fibre and Araldite carbon fibre and glass fibre carbon fibre reinforced plastics carbon fibre reinforced polymer carbon fibre reinforced polymer (CFRP) carbon nanofibers carbon nanotube carbon nanotubes carbon nanotubes (CNT) carbon template carbon-fibre carbonation carbothermal method cardanol cashew nut shell liquid cast composites casting casting temperature casting temperatures Catalyst-assisted chemical–mechanical polishing catalysts catalytic degumming system catalytic effects causes of failure CEC cell performance cell structure cellular cellular automaton (CA) cement cement mortar cemented carbides ceramic microballoons ceramic microspheres CFRP CFRP composites chain dynamics Challenges characteristics degradation characterization chemical analysis chemical bonds chemical composition Chemical Mechanical Polishing Chemical Mechanical Polishing (CMP) Chemical products chemical reactions chemical treatment chemical treatments chemical vapor deposition chemical vapour deposition Chemical-mechanical polishing Chemical–mechanical polishing chest protective equipment chicken feathers chloride diffusion chloride penetration chopped bagasse fibers circular hole civil applications civil construction civil engineering civil engineering applications civil engineers civil infrastructure civil infrastructures clamped plates clay clay minerals clay nanocomposites clogging cloth cover factor clothing CNTs coal seam gas coal seem gas coal-seam gas coating coating methods coatings coatings and finishes coconut coconut shell codes of practice codes of practice and standards cohesion cohesive element cohesive interface modelling coil coil dimensions coiled carbon nanotube coiled carbon nanotubes coiled nanotubes coir fiber coli collapsed tubes collision and contact sports column columnar equiaxed transition (CET) combed ring spun yarns combustion compact spun yarns compaction comparison compatibilization compatibilized blends complex oil and gas reservior complex structures component component specific damage index composite composite action composite beam composite beams composite beams and girders composite bridges composite fibres composite laminate composite materials composite panels composite piles composite plate composite plates composite polymer matrix composite properties composite recycling composite repair composite sandwich beam composite sandwich beams composite sandwich panel composite sandwich structure composite sandwiche composite sandwiches composite scaffolds Composite sleeper technologies composite structures composite systems composite systems fly ash composite tooling composite tubes composite walls composites compression compression and shear compression failure compression modulus compression moulding compression stress compression test compression tests compressive compressive behaviour and modelling compressive elastic modulus compressive load compressive properties compressive strength computational modelling computer simulation concrete concrete beam concrete beams concrete coating concrete columns concrete deck concrete face concrete infill concrete properties concrete reinforcements concrete repair concrete strength concrete structures confidence of tuning parameters confinement connection connections connector constant head constant-life diagrams Constitutive relations construction construction industries Construction materials construction works contact angle contact arc length contact mechanism contaminated sand contamination contamination and crude oil content context controlled environment controlled nucleation controlled nucleation method conventional ovens convergence Cook-Weisberg test cooling rate cooperative research centres copper mould casting copper selenide core core cracking load core shear corona corona discharge corona discharges correlation correlation coefficient corroded pipelines corroded steel corroded steel angles corrosion corrosion behavior corrosion of steel corrosion rate corrosion resistance cost analysis cost effectiveness cost modelling cost-effective cotton fabric cotton fiber cottonised hemp fibre counterface materials coupled phenomena coupon coupon test coupons course development CPF resins crack cracked beam cracking cracking opening angle cracks CRC credit transfer creep creep behavior creep response creep ruptures cricket ball critical length cross link density cross-link density crosslink density crosslinker crude oil crushing stress crystal crystal growth crystalline insulators crystalline phase crystallization crystallization behaviour crystallographic CTBN Cu based BMG Cu deficiency Cu-based Cu-based BMG Cu/Al composite cumulative damage cure cure shrinkage curing curing of polymers curing temperature curriculum cyclic loading Cyclic loads cyclic stability cylindrical specimens damage damage accumulation damage curves damage detection damage index damage mechanics damage severity damage tolerance damping data synchronization date palm date palm fibre DDA debonding debonds decking defects deflection deflection response deformation deformation behaviour deformation mechanism deformation mechanisms degradability degradation degumming dehydroxylation delaminated composite beams delamination delaminations delivery rubber roller DEM dendrite deployable deployable shelters deployable structures design design guidelines design methods design model design optimisation design optimization design principles design strategies desizing destructive testing detection technique deterioration developments Dexamethasones diameter distributions dielectric constant dielectric loss dielectric loss tangent differential scanning calorimetry differential scanning calorimetry (DSC) differential scanning calorimetry (photo-DSC) diffusion coefficient digital elevation model digital technologies dimensional control diphenolic acid direct electrospinning direct pullout test Direct Shear Test disaster disaster resilience discrete element modelling disinfection disinfection by-product dislocation sliding dispersion stability dissolution distance education distance students distortion distributed DAQ distributed sensing distribution method dominant frequency double-strap shear dough down powder drift capacity drilling process driveability drop weight impact strength drop-weight test dry adhesive wear drying shrinkage DSC ductility durability dyeing dynamic dynamic analysis dynamic behavior dynamic behaviour dynamic fracture mechanics dynamic mechanical analysis dynamic mechanical analysis (DMTA) Dynamic mechanical properties dynamic mechanical property dynamic mechanical thermal analysis dynamic mechanical thermal analysis (DMTA) dynamic stress dynamic stress intensity factor dynamic tester earthquake earthquake intensity index earthquakes ECC eccentricity edgewise effect effect of catalyst effect of design parameters Effective bond effective heat conductivity effective length effective specific heat efflorescence EHO elastic modulus elastic properties elastomers electric field analysis electric field intensities electric field intensity electric fields electric voltage electrical conductivity electrical loss tangent electrical losses electrical properties electrochemical corrosion electrochemical impedance spectroscopy electrochemical performance electrochemical properties electrochemistry electrolyte electromechanical coupling electromechanical devices electron microscopy electron spin resonance electron transfer electrospinning electrospinning process electrospinning setups electrospinning techniques electrospuns elevated in-service temperature elevated temperature Eley-Rideal mechanism embed embeddable embeddable and locatable spinning embedded FBG embedded sensors emergency services empirical model end mills energy absorption energy absorption behaviour energy efficiency energy storing rate criterion engineering engineering analysis software Engineering design engineering education engineering leadership program engineering management science engineering materials enhancing effect environment environmental friendly environmental regulation environmentally responsible envirospheres EPON epoxidation epoxide groups epoxidized hemp oil epoxidized oils epoxidized vegetable oil epoxidized vegetable oils epoxies epoxy epoxy composites epoxy compounds epoxy grout epoxy injection Epoxy resin epoxy resin hollow glass powder epoxy resins equiaxed structures ergonomic design error termination ES-XFEM ester composites Europe evaluation EVO Excel exfoliation expansion chambers experiential learning experimental experimental data experimental design external clamping external post tensioning external post-tensioning external prestressing external studies extrusion extrusion moulding fabric fabric characterisation fabric geometry fabric production processes fabricating process fabrication fabrication and characterizations fabrication technique fabrics/textiles Failure failure analysis failure behaviour failure criteria failure index failure load failure map failure mechanisms failure mode failure mode map failure modes failures falling head fast responsive fatigue fatigue loadings fatigue properties fatigue resistance fatigue testing faujasite fault tree analysis FBG FBG sensors FBG sensor FBG sensors FEA ferrocement fiber Fiber Bragg grating (FBG) fiber Bragg grating sensor fiber composites fiber diameters fiber processing fiber production fiber productivity fiber quality fiber reinforced composite fiber reinforced polymer fiber trapping fiber-optic sensors fiber-reinforced polymer fiber-reinforced polymer (FRP) fibers fibre fibre Bragg grating sensors fibre composite fibre composite multilayer plates fibre composite multilayer slab fibre composite sandwich panel fibre composites fibre constituents fibre diameter fibre lengths fibre model analysis fibre optic sensors fibre orientation fibre polymer composites fibre properties fibre reinforced fibre reinforced material fibre reinforced plastic (FRP) fibre reinforced plastics fibre reinforced polymer fibre reinforced polymer (FRP) fibre reinforced polymer composites fibre reinforced polymers fibre reinforced thermoplastic composites (FRTP) fibre volume fraction fibre wraps fibre-glass fibre-matrix compatibility Fibre-reinforced polymer fibre/matrix bond Fibreglass fibres fibre–reinforced composite field application field emission scanning electron microscopy field experiment field-emission transmission electron microscopies Filler filler addition fillers filling stages film films finish temperature finite element finite element analysis finite element calculations finite element method finite element modeling finite element modelling finite element simulation finite elements finite-discrete element method Fire fire control fire performance fire reaction properties fire resistance fire structural performance first year student Fisher-Snedocor test fixed frequency microwaves fixity flame retardancy flame retardant flame retardation flammability flatwise flexibility flexible delivery flexible pavement flexible pavements flexural flexural behavior flexural behaviour flexural confinement flexural failure flexural modulus flexural response flexural stiffness flexural strain Flexural strength flexural strengthening flexural test flexural tests flexure flood flood events flood-ways floodway floor floor panel floor slabs flooring system flow modelling flowthrough fluidised bed process fluids fluorescence fly ash foam foam concrete foam grenade foam products foamed bitumen force method model force response formative assessments forming forward osmosis four point bending test four-point bending four-point static bending test Fourier transform infrared spectroscopy Fourier transform infrared spectroscopy (FTIR) FR fracture fracture mechanics fracture mechanism fracture morphology fracture toughness fragmentation free energy free vibration free vibration behaviour frequency frequency bands friction friction angle friction coefficients FRP FRP bar FRP composites FRP confinement FRP materials FRP pultruded tubes FRP retrofitting FRP structures FRP-reinforced concrete FTIR fuel cell fuel cells full scale test full-scale full-scale testing fullerene Fully grouted cable bolt functionalize fuse borosilicate Future recommendations GaAs substrates GaAs(111) Gallium nitride garamite gas gel time gelatinisation gelatinization genetice algorithm geometry effects geoolymer concrete geopolymer geopolymer concrete geopolymer-concrete columns geopolymerization geopolymers GFRP GFRP bars GFRP beams GFRP composite GFRP composites GFRP sandwich GFRP sandwich panels GFRP skins GFRP structures glass glass chemistry glass fiber composites glass fiber reinforced composites glass fiber reinforced plastics glass fiber-reinforced epoxy glass fibre glass fibre composite glass fibre composites glass fibre reinforced polymer glass fibre reinforced polymers glass fibre-reinforced polymer glass fibres glass forming ability glass hollow spheres glass microballoon glass microspheres glass non-uniform strain glass powder Glass transition temperature glass-fiber-reinforced polymer (GFRP) bars glass-fibre glass-fibre-reinforced polymer (GFRP) glass-forming ability glasses glass–fiber-reinforced polymer (GFRP) bars globular structure glucose glue-laminated beam glue-laminated beams glued sandwich beams glulam beams glycerol gomuti gomuti fibre good correlations government grain coarsening grain growth grain morphologies grain size grain structure grain structures graphene graphene nanosheets graphite green alternative green building materials green buildings green composites green materials grillage beam analogy grout growth mechanisms guardrail hairiness halloysite halloysite nanotubes handrail hanger hardness hardwood timber hardwoods HDPE head impact head injury criterion headed GFRP bar headform headstock headstocks health monitoring heart rates heat affected zone heat applied heat released heat treatment heavy loads height reduction hemicellulose constituents hemp hemp fabrics hemp fibre hemp fibre polypropylene composites hemp fibres hemp hurd hemp hurd powder hemp oil hemp oil based bioresin hemp oil based bioresins hemp thermoset sandwich composites Hercosett heterogeneous nucleations heterogeneous reaction heterostructure Heuristic algorithms hexagonal core hexagons hierarchy high electric fields high flexibility high magnetic fields high response speed high strength concrete high strength concretes high strength conductive polymers high temperature high temperature proton exchange membrane high temperature strength high ZT high-strength concrete high-tensile strength high-tensile strengths higher education higher education research highway bridges hollow core hollow FRP piles hollow micro-spheres hollow microsphere hollow particles hoops hot deformation hot drawing hot rolling hot tear hot-pressing hot/wet conditioning household travels humidity hybrid beam hybrid beams hybrid compounds hybrid fiber reinforced polymer hybrid FRP hybrid FRP composite hybrid FRP composite girder hybrid FRP composites hybrid girders hybrid materials hybrid structure hybrid structures hybrid-III dummy hydrocarbons hydrogel hydrogels hydrogen hydrogen peroxide hydrogen storage hydrophilic polymers hydrophilic properties hydrophilicity hydrophobicity hydrothermal method hygroscopic behavior hypereutectic aluminium alloy IBVMS image monitoring imidization immersion impact impact behavior impact behaviour impact damage impact fatigue impact intensity Impact Properties impact property impact resistance impact testing impact toughness impedance implants in situ scanning electron microscopies in-line in-plane in-plane loads In-plane Shear in-situ aluminium-based composite in-situ polymerization in-situ TiC particles inclusion indicator indium selenide industrial engineering industrial waste industry inferential statistics infill infinite plate Influence factors infrared spectroscopy infrastructure infrastructure failures initial strains initial values initiation and propagation injection molding injection moulders Injection moulding innovation inorganic polymer input voltages integrity interaction diagram interface interface bonding interface bondings interface temperature interfacial adhesion interfacial bonding interfacial energy interfacial shear strength intermediate layer internal friction/damping internal mixing process internal repair intra-molecular bonding intrinsically flame retardant intrusion detection ion exchange resin iron aluminide iron aluminides iron content ISI isothermal conduction calorimetry isothermal holding IT-SOFC Izod jacket Jarque-Berra test jet formation joint Joint shear strength joints joist jute Kane band models kaolin kaolinite kenaf fiber kenaf fibre key parameters kinetics kinetics (polym.) LaAlO3/SrTiO3 heterostructures Lagrange’s Method lamb wave laminate laminated glass laminated panels laminated sandwich beams laminated sandwich plates Langmuir-Hinshelwood-Hougen-Watson model lap shear strength laser sources lattice lattice model lay-up lay-up (manual/automation) layer-by-layer leaching lead lead-free solder learning resource least square method leg reinforcement less-lethal ammunition life expectancies life time prediction light composites light crude oil light crude oil shear strength light resin transfer moulding light weight lightweight lignocellulosic composites Lignocellulosic Fiber limiting oxygen index linear approximations linear diagrams linear magnetoresistance linear programming linkages linseed oil liquid composite moulding literature review load load testing load transfer lag load-deflection relation loading ability local bending locatable location detection locking key long term performance long-term long-term continuous monitoring longitudinal strength loss modulus loss tangent low densioty polyethylene low density polyethylene low loss low temperature pouring low-Al2O3 fly ash low-frequency noise low-strength concrete LS-SVM lubricant additives lubricant oil lubricating oils M2S2 machinability machine magnesium magnesium alloy magnesium alloys magnesium oxide board magnetic behavior magnetic-properties magnetoelectronics magnetoresistance management management science manufacture manufacturing manufacturing process manufacturing processes MAPP marine concrete marine engineering materials marine structures market intelligence marketing data analysis masonry Mass transit materail processing material composition material properties Material removal mechanism Material Removal Rate material usage Materials characterisation Materials science mathematical model mathematical modeling MATLAB matrix matrix materials maximum flexural strain mechanical mechanical anchorage mechanical and structural properties mechanical and thermal properties mechanical behavior mechanical behaviour mechanical characterization mechanical joints mechanical loss mechanical loss tangent mechanical losses mechanical properties mechanical property mechanical stirrings Mechanical testing medical applications melt spinning technique melting property melting temperature member capacity membrane mentoring metakaolin metakaolinite metal metal catalysts metal cutting industry metal fatigue metal wires metallic metallic composites metallic glasses metallic material method comparison metrology Mg alloys Mg matrix Mg-base alloy Mg65Cu25Gd10 micro businesses micro-crack density micro-hardness Micro-mechanics micro-spheres micro-structural microbially influenced corrosion (MIC) microcapsules microclimate microencapsulation microfibre composite resins microfibre resins microfibril angle micromechanics microparameter microscale sensors microscope technologies microscopic observations Microsoft Office microsphere size microsphere sizes microstructural evolution microstructure microstructure and materials properties microstructure formation microstructure modeling microstructures microstructures and mechanical properties microwave irradiation microwaves microwaves and vinyl+ ester resin MID Miedema's model mild temperatures military modular shelter system milling machine design minimum intermicrosphere distance mix design mix proportion mixed plastic solid waste mixes mixing mixing enthalpy mixing process MnO2/graphene composite modified electrode mobility modal acoustic emission modal flexibility modeFRONTIER Model model coupling model updating modeling modelling modification modified cellular automaton modified phenolic core modulus modulus of elasticity moisture moisture absorbent moisture absorption moisture effect moisture liberation moisture measurement moisture regain moisture resistance molding moment moment-curvature relation monitoring morphology mortar moving load identification MTHOTA MTHOTA surrogate MTHOTA thorax surrogate multi-objective multi-pultrusion fibre composite multi-walled carbon nanotubes multifunctional materials multiple back-propagation multiply cracks and crack density and effective moduli and numerical approaches and composite structures and transverse cracks multiscale multiwall carbon nanotubes multiwall nanotubes myristic acid N-isopropylacrylamides nafion nano materials nano research nano technology nano- SiO nano-architecture nano-fibrous material nano-structures nanoclay nanoclay/polymer composites nanoclays nanocomposite nanocomposite hydrogels nanocomposites nanocrystals nanofiber nanofibers nanofibres nanoindentation nanoindentation tests nanoindenter nanomaterials nanoparticles nanoribbons nanostructure nanostructure engineering nanostructured materials nanostructured surface nanostructures nanostructuring nanotechnology nanowires NaOH NaOH solutions NaOH treatment concentration naphthalene narrow band gap semiconductors natural natural composites natural disasters natural fiber natural fiber composite natural fiber composites natural fibers natural fibre natural fibre composites natural fibre reinforced plastics (NFRP) natural fibre reinforced polymer composites natural fibres natural frequencies natural frequency natural materials natural polymers natural textile material natural fibre Nd addition near-surface mounted reinforcement needleless electrospinning negative volume network optimisation network topology neural network neutron-diffraction New Zealand nickel alloys nickel slag nickel-iron battery nickel-titanium alloys nip points NIR FBG sensor NIR FBG sensors NIR fibre Bragg grating NiTi Nitinol tube noil hemp fibre noise noise reductions noise reflections non-biodegradable non-destructive testing non-lethal non-lethal ammunition non-linear autoregressive with exogenous non-linear dynamic analysis non-linear finite element non-linear transient impact analysis Non-noble metal catalyst non-recyclable non-renewable nonconventional technologies nondestructive testing nonevaporable water nonstoichiometry normal strength concrete normalisation novel sandwich structure numerical numerical analysis numerical methods numerical simulation nut tree plantation nylon 66 nylon fiber occupant safety occupational health and safety off-axis loading offshore one and two-way spanning one way one- and two-way spanning online online course online discussions online postgraduate course online quizzes open pores OpePOSS operating parameters operating parameters optical actuator optical properties E. Injection Moulding optical sensors optimal content Optimal design Optimal mix optimal noise optimisation optimization optimum allocation optimum design optimum yield order of magnitude organosolv lignin orthogonal design out-of-plane loads overall costs overwrap oxygen partial pressure oxygen reduction oxygen vacancy palm oil panel paper particle reinforced composites particle reinforcement particle size distribution particle-reinforcement particleboard particulate composite particulate composites paste backfill patch repair pavement pavement rehabilitation pedestrian footpath pedestrian safety peel strength peer assisted learning peptizer performance performance criteria permeability permeable concrete perovskite peroxycarboxylic acid perspiration pervious concrete PESD petroleum well bores PFC PG phase phase inversion technique phase volume phenol formaldehyde phenolic phenolic composites phenolic core phenolic resin phenolic resins photocatalyst photocatalytic photocatalyts Physical and mechanical properties physical integrity physical properties physiological strains pile pile driving pile materials pile rehabilitation piles pilot studies pipeline planes planetary systems – stars: activity – techniques: radial velocities plant fiber plastic deformation plasticizing effect plastics plate girder bridges PMC PMCs point load poisson ratio Poisson's ratio Poisson’s ratio poly (amide acid) poly lactic acid poly(amide acid)s poly(d poly(lactic acid) poly(N-isopropyl acrylamide) (pNIPAM) poly(N-isopropylacrylamide) poly(vinylidene fluoride) poly(vinylphosphonic acid) polycarbonate polyester polyester based filler polyester composite polyester composites polyester matrix polyester resin polyethylene polyethyleneimine polyhedral oligomeric silsesquioxanes polyimide polyimide imidization polylactic acid polylactic acids polymer polymer coating polymer composites polymer concrete Polymer concrete matrix polymer electrolyte membrane fuel cell (FEMFC) polymer jets Polymer matrix polymer-matrix composite polymer-matrix composites Polymer-matrix composites (PMCs) polymer-matrix composites(PMCs) polymeric composites polymeric glass polymeric materials polymeric membrane polymeric scaffolds polymerization polymerizing polymermatrix composites (PMCs) polymers polymer–matrix composites polymer–matrix composites (PMCs) polypropylene polypropylene fiber polypropylene matrix composites polypyrrole polystyrene polystyrene core polyurethane polyvinyl alcohol POM-QM for Windows 3 pore size pore size distribution pore structure pore structures porosity porous concrete porous materials porous surface post-curing post-impact behaviour post-impact properties post-mold processing post-tension post-tensioning postgraduate postgraduate course postgraduate program potassium persulfate (KPS) potential benefits potential materials pouring temperature pouring temperatures powder metallurgy power demand power supply PP practice practice course pre-mould pre-processing predict prediction of mechanical properties prefabrication preloading preparation prepreg prepreg carbon prestress force identification (PFI) prestressing preventive maintenance process modelling processing techniques produced water production and operations management production engineering production rate and power consumption production rates professional engineers professional skills profiled skin sheet profiled thin skin sheets project management project-based approaches project-based learning projectile-thorax interaction propagation characteristics Properties properties and characterization propylene glycol protective measures proton conductivity pull-out tests pullout pullout behaviour pullout capacity pultruded composite pultruded fibre-reinforced polymer tube pultruded FRP pultruded sections pultruded tubes pultrusion pultrusions pultruted beams pure magnesium pure polymers pyromellitic dianhydride PZT Q factor quality quantitative methods railway Railway sleeper railway sleepers rainflow counting ramie fabric random short fiber composites randomly distributed rapidly solidified rare earth La raw RC beams reaction formed silicon carbide ceramic reaction injection molding reaction kinetics reactivity reciprocity relations reconstruction activities recrystallisation recrystallization recycled carbon fibre recycled concrete recycled materials recycled mixed plastic composites recycled mixed plastic wastes recycled mixed plastics recycled waste reducing noise reduction of oxygen reflection and transmission coefficients regression analysis rehabilitated steel rehabilitation reinforce reinforced composite plates reinforced composites reinforced concrete reinforced concrete beams reinforced honeycomb reinforced honeycombs reinforced plastics reinforcement reinforcement orientation efficiency reinforcing reinforcing bars remediation remote access remote areas renewable renewable polymers renewable resources repair repeated impact damage modelling repeated impacts repeated windings replacement replacement sleepers reproducibility research and development residential residential school residual properties residual/internal stress resilience resilient modulus resin resin composites resin transfer moulding resins resistance resorbable retrofit. retrofitting reverses osmosis rheology Rigid foam rigid foam applications rigid polyurethane foam rigid-rod polymer ring ring spinning road infrastructures road rehabilitation road structures robust ferromagnetic state rock damage Rockwell-A macrohardness roller mill machine rotational stiffness rotor blades routing rubber rubberwood rule of mixture S-N diagrams S2O82−-Fe2+ additive sandwich sandwich beam sandwich beams sandwich composite sandwich composite beams Sandwich composites sandwich construction sandwich core sandwich materials sandwich panel sandwich panels sandwich structure Sandwich structures sapphire Sapphire substrate sawdust scan rates scanning electron microscope scanning electron microscopy SDOF and MDOF systems seawater second phase secondary mineral sedimentation Seismic analysis seismic responses of structures selectivity and sensitivity self-similarity of diffusion self-supporting SEM SEM and pull-out tests SEM imaging semi rigid joint semi-solid metal processing semi-solid state semiconductor devices semiconductor devices and integrated circuits semiconductor doping semiconductor nanocrystals semisolid semisolid casting semisolid deformation behavior semisolid feedstock semisolid metal processing semisolid processing semisolid state semisolid structure formation sensing material sensitivity analysis sensor solution sensors sericin Serviceability shape memory shape memory alloy shape memory alloys shape memory polymers shape memory polymers composites shear shear behaviour shear buckling shear connection shear connector shear crack shear cracks shear span shear span effect shear span-to-depth ratio shear strength shear strengthening shear wall sheer strengthening shelters SHM short bar test short bar test and viscosity short beam short columns short-fiber composites SHPB shrinkage Si-based SiC inserts sign test signal analysis signal attenuation significance analysis silane treatment silica abrasive size silica fume silicon carbide silk silk fibre silk fibres silk-based polymer composite silkworm silk silkworm silk fiber silkworm silk fibre silkworms simple cubic cell simplex method simulated annealing SA simulated wind speed simulation singeing single and multi-span cable structures single fibre strength sintering SIPs siricin siro core-spun sirofil slab slabs slag slender column slender columns SLG SLG and viscosity sliding sliding friction sliding wear slurry SMA small and medium enterprises small business smart materials smart structure smart structures SME SMEs sodium silicate software packages solid mechanics solid state physics solidification soybean oil specific capacitance spectral change spectral distortion spectrophotometry spectrum spectrum loading spinning spinning distance spintronic applications spiral coils spirals sports injuries sports injury spot replacement spray spray formed 7075 Al alloy spun yarns squat wall Squeeze Flow stabilisation stability stainless steel gauze staple yarns starch starch contents static flexural tests static loading static tension static-fatigue static–fatigue statistical inference statistical methods statistical models statistical tests statistics steel coil steel lattice tower steel lattice transmission tower steel structures steel truss members Step-terrace structure step/spectrum loading stiffness stirrups stopband storage moduli storage modulus stored energy criterion strain strain at break and flexural modulus strain energy strain gage strain measurement strain rate strain rate sensitivity strain smoothing Strarch strength strength (IGC: D5/D6) strength development strength of materials strength to weight strengthening strengthening (metal) stress stress concentration factor stress ratio effect stress strain relations stress-strain behaviour stress-strain relationship structural applications structural aspects structural behaviour structural characteristics structural composite sandwich panels structural composite sandwiches structural composition structural design structural engineering structural evolution structural health monitoring structural health monitoring (SHM) structural health monotoring Structural insulated panel structural materials structural performance structural properties Structural reaction injection moulding structural rehabilitation structural strength structural stress structure structure conditions structure formation structure-property relationships Structures student performance styrene subgrade modulus sugar-palm fibre sulfate groups super-hydrophobic super-hydrophobic surfaces supercapacitor electrodes supercooled liquid regions superelasticity superfine wool powder superheat superhydrophobic support materials support modulus surface analysis surface chemistry surface coatings surface grafted surface modification surface moisture surface morphology surface morphology analysis surface roughness surface temperature surface treatment surface treatments surface wettability surfaces surgical operation surgical procedures surrogate suspension bridges sustainability sustainable sustainable fibres sustainable material sustainable materials synergetic effect synergic identification synergistic carrier scatterings syntactic foam syntactic foams synthesis synthesis conditions synthetic synthetic fibre synthetic fibres synthetic foams synthetic methods system tack tannin teaching teamwork technology transfer temperature temperature changes temperature field temperature response temporary support tensile tensile loading tensile moduli tensile modulus tensile properties tensile property tensile strength tensile tests tension softening tensionless Winkler foundation termination terrain modelling test methods testing textile fabric textile material textiles Tg TGA TGA-FTIR TGA/FTIR TGA–FTIR the human response corridor theoretical analysis theoretical study thermal thermal analysis thermal conductivity thermal decomposition thermal degradation thermal expansion thermal gravimetric analysis thermal insulation thermal properties thermal properties of materials thermal resistance thermal runaway and loss tangent thermal stability thermo-gravimetric analysis thermo-responsive thermodynamic properties thermodynamically stable thermodynamics Thermoelastic Stress Analysis thermoelectric thermoelectric equipment thermoelectric materials thermoelectric performance thermoelectricity thermography thermogravimetric analysis thermogravimetry Thermomechanical thermomechanical analysis thermomechanical modelling thermomechanical processing thermomechanical properties Thermoplastic thermoplastic composites thermoplastic epoxy resin thermoplastic natural rubber thermoplastic polymer composites thermoplastic resin thermoplasticity Thermoplastics thermoset mechanical thermosets thermosetting resin thermosetting resin thermosetting resins thick cylinder thick laminates thickness controls thickness measurement thixotropic feedstock thoracic injury thoracic surrogate thorax thorax surrogate threaded bolt three dimensional finite element modelling three dimensional modelling three-dimensional tissue formation three-point bending timber timber bridges timber slabs timber sleepers time dependence time frequency analysis time-dependent response tin dioxide TiO2 tissue engineering tissue engineering applications titanium alloys titanium dioxide tool life topology topology core torsional design torsional resistance toughening mechanisms toughness tower design TPE foam TPE foam nose tracer transformation temperature transition transition metals transmission electron microscope (TEM) transmission line system transmission loss transmission tower transport costs transverse transverse rupture strength travel demand tribological tribological loading tribological properties tribology triple helix trivalent iron TRS truss truss systems trusses tungsten turbulent fire turbulent patch turnout Turnout sleepers twin screw extruders twisted yarn two plates two-way shape memory effect UDL UHMWPE ultimate tensile strength ultra-high performance fiber-reinforced concrete ultracapacitors ultrasonic lamb waves ultrasonic sensing ultrasonic signals ultrasonics ultrasound Ultraviolet radiation unbalanced loads uncertainty of measured data undergraduate engineering courses underground mine underwater undirectional unevenness unevenness CV uniform dispersions unilateral contact buckling uninterruptible power supplies university unreinforced masonry unsaturated polyester unsteady-state method URM UV curing vacuum infusion vapor deposition variable frequency microwaves variable frequency microwaves (vfm) variable microwave frequency VCmax vegetable oil vegetable rubber resins vehicle front protection system vehicle-animal collision ventilation systems VFM vibration vibration based damage detection vibration characteristics vibration modes vibrio natriegens Vicker's hardness Vickers microhardness vinyl ester vinyl ester composite vinyl ester resin vinyl ester/cenosphere composites vinyl resin vinylester vinylester resin vinylester resins virtual distortion method (VDM) viscoelasticity viscosity viscous criterion viscous injury voltammetry measurements volume expansion volume expansion of bulk microspheres volume expansion rate vulnerability Wald test wall noggings waste utilization water water lubrication water absorption water contact angle water quenching water resistance water retention wave propagation wave scattering wavelet analysi wavelet analysis weak antilocalization wear wear mechanism wear of materials wear particles wear performance wear rates wear resistance wear testing weathering web-based teaching Weibull analysis weight content weight percentages weldability Welding well cementing wet contact wettability wide-frequency phonon scatterings wind data wind mill wind turbine Wind turbine blade wind turbine blades windmill windmill design windmills Winkler foundation wire diameter wire-coils wireless underground sensor network WLF wood baton wood veneer wooden beams and girders wooden bridges wool wool fabric wool powder woven fibre properties woven hemp fabric woven roving WUSN X ray diffractometers x-ray diffraction X-ray diffraction (XRD) X-ray photoelectron spectroscopy (XPS) yarn yarn fineness yarn irregularity yarn properties yarn stem Yarns yellowness index yield strength Young modulus Young's modulus Young's Modulus silk fibre reinforced Young’s modulus zeolite zirconia zirconia nanoparticles Zr-based fly ash
Number of items: 4218.

1-lactic acid) (PLA)

Cheung, Hoi-Yan and Lau, Kin-tak and Tao, Xiao-Ming and Hui, David (2008) A potential material for tissue engineering: silkworm silk/PLA biocomposite. Composites Part B: Engineering, 39 (6). pp. 1026-1033. ISSN 1359-8368

20th Australasian Conference on the Mechanics of Structures and Materials

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao (2009) Preface to futures in mechanics of structures and materials conference. ACMSM20. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

3-RCS

Thota, Narasimha and Epaarachchi, Jayantha and Lau, Kin-Tak (2014) Development and validation of a thorax surrogate FE model for assessment of trauma due to high speed blunt impacts. Journal of Biomechanical Science and Engineering, 9 (1). 08-1. ISSN 1880-9863

3-rib chest structure

Thota, Narasimha Murthy and Eepaarachchi, Jayantha A. and Lau, K. T. (2012) Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study. In: 7th Australasian Congress on Applied Mechanics (ACAM 2012), 9-12 Dec 2012, Adelaide, Australia.

33 percent by weight carbon-fibre-reinforced low density polyethylene [LDPE/CF (33%)]

Ku, H. S. (2008) Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation. Journal of Electromagnetic Waves and Applications, 22 (1). pp. 69-84. ISSN 0920-5071

33 percent by weight glass-fibre-reinforced low density polyethylene [LDPE/GF (33%)]

Ku, H. S. (2008) Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation. Journal of Electromagnetic Waves and Applications, 22 (1). pp. 69-84. ISSN 0920-5071

3D

Wang, Xin and Wang, Xungai and Lin, Tong (2012) Electric field analysis of spinneret design for needleless electrospinning of nanofibers. Journal of Materials Research, 27 (23). pp. 3013-3019. ISSN 0884-2914

A. Sandwich structures

Anjang, A. and Chevali, V. S. ORCID: https://orcid.org/0000-0002-5648-0344 and Feih, S. and Mouritz, A. P. (2016) Deterioration of the fire structural resistance of sandwich composite under tension due to water absorption. Composites Part A: Applied Science and Manufacturing, 87. pp. 263-270. ISSN 1359-835X

A356 Al alloy

Li, Qiang and Yu, Baoyi and Zhang, Huawen and Li, Runxia and Wang, Feng and Xie, Shuisheng and Huang, Guojie and Wang, Hao (2010) Cellular automaton modeling of semisolid microstructure formation. China Foundry, 7 (2). pp. 143-148. ISSN 1672-6421

A356 alloy

Ning, Z. L. and Wang, H. and Sun, J. F. (2010) Deformation behavior of semisolid A356 alloy prepared by low temperature pouring. Materials and Manufacturing Processes, 25 (7). pp. 648-653. ISSN 1042-6914

A356 alloys

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

ABAQUS

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2011) Multi-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applications. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

abrasive wear

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and El-Tayeb, N. S. M. (2010) Wear characteristics of thermoset composite under high stress three-body abrasive. Tribology International, 43 (12). pp. 2365-2371. ISSN 0301-679X

absorbent

Liu, Yi and Yan, Chunjie and Zhang, Zuhua and Wang, Hongquan and Zhou, Sen and Zhou, Wei (2016) A comparative study on fly ash, geopolymer and faujasite block for Pb removal from aqueous solution. Fuel, 185. pp. 181-189. ISSN 0016-2361

ACMSM20

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao (2009) Preface to futures in mechanics of structures and materials conference. ACMSM20. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

acoustic

Schubel, P. J. and Crossley, R. J. and Boateng, E. K. G. and Hutchinson, J. R. (2013) Review of structural health and cure monitoring techniques for large wind turbine blades. Renewable Energy, 51. pp. 113-123. ISSN 0960-1481

acoustic absorption

Zhang, Zuhua and Provis, John L. and Reid, Andrew and Wang, Hao (2015) Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete. Cement and Concrete Composites, 62. pp. 97-105. ISSN 0958-9465

acoustic emission

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2013) An investigation of acoustic emission signal attenuation for monitoring of progressive failure in fiberglass reinforced composite laminates. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1442-1456. ISSN 2229-8649

Kahandawa, G. C. and Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) Detecting delamination in a composite structure using an embedded FBG-AE hybrid system. In: 7th Australasian Congress on Applied Mechanics (ACAM 2012), 9-12 Dec 2012, Adelaide, Australia.

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

acoustic noise

Choy, Y. S. and Liu, Y. and Cheung, H. Y. and Xi, Q. and Lau, K. T. (2012) Development of composite plate for compact silencer design. Journal of Sound and Vibration, 331 (10). pp. 2348-2364. ISSN 0022-460X

acrylated epoxidized hemp oil

Manthey, Nathan William (2013) Development of hemp oil based bioresins for biocomposites. [Thesis (PhD/Research)]

activated carbon

Salleh, Zulzamri and Islam, Md Mainul and Yusop, M. Y. M. and Muhamad, M. S. (2013) Tensile behaviours of activated carbon (AC) coconut shell reinforced recycle polyethylene (PET) hybrid composites. In: 12th International Conference on Frontiers of Polymers and Advanced Materials (ICFPAM 2013), 8-13 Dec 2013, Auckland, New Zealand.

activating

Zhang, Zuhua and Yao, Xiao and Zhu, Huajun and Hua, Sudong and Chen, Yue (2009) Activating process of geopolymer source material: kaolinite. Journal Wuhan University of Technology, Materials Science Edition, 24 (1). pp. 132-136. ISSN 1000-2413

actuators

Lau, Kin-Tak and Epaarachchi, Jayantha and Sudarshan, T. S. (2010) Sensors, actuators, and intelligent processing [Preface]. Materials and Manufacturing Processes, 25 (4). p. 211. ISSN 1042-6914

additives

Zhuge, Yan (2010) Investigation of the effect of various additives on the strength of environmentally friendly permeable concrete. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

ADFP

Matveev, M. Y. and Schubel, P. J. and Long, A. C. and Jones, I. A. (2016) Understanding the buckling behaviour of steered tows in automated dry fibre placement (ADFP). Composites Part A: Applied Science and Manufacturing, 90. pp. 451-456. ISSN 1359-835X

adhesion

Crossley, R. J. and Schubel, P. J. and De Focatiis, D. S. A. (2013) Time-temperature equivalence in the tack and dynamic stiffness of polymer prepreg and its application to automated composites manufacturing. Composites Part A: Applied Science and Manufacturing, 52. pp. 126-133. ISSN 1359-835X

Aldousiri, B. and Shalwan, A. and Chin, C. W. (2013) A review on tribological behaviour of polymeric composites and future reinforcements. Advances in Materials Science and Engineering , 2013. pp. 1-8. ISSN 1687-8434

Islam, Md Mainul and Kim, Ho Sung (2012) Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior. Journal of Sandwich Structures and Materials, 14 (1). pp. 111-127. ISSN 1099-6362

Islam, Md Mainul and Kim, Ho Sung (2010) Manufacturing and behaviour of sandwich composites made of starch as binder for core and adhesive between core and skins. In: 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010), 24-26 Sept 2010, Kottayam, Kerala, India.

Islam, Md Mainul and Kim, Ho Sung (2007) Properties and mechanical behaviour of novel sandwich composites made of syntactic foam and paper skin. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

adhesion wear

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Chin, C. W. (2012) Epoxy composite based on kenaf fibers for tribological applications under wet contact conditions. Surface Review and Letters, 19 (5). pp. 1250050-1. ISSN 0218-625X

adhesive wear

Singh, Narish and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Rilling, Dirk (2011) Tribological characteristics of sustainable fibre reinforced thermoplastic composites under wet adhesive wear. Tribology Transactions, 54 (5). pp. 736-748. ISSN 1040-2004

Singh, N. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Rilling, D. (2011) Adhesive wear of thermoplastic composite based on kenaf fibres. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225 (2). pp. 101-109. ISSN 1350-6501

Singh, Narish and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Rilling, Dirk (2011) Investigations on wear and frictional properties of kenaf fibre polyurethane composites under dry and wet contact conditions. International Journal of Precision Technology, 2 (4). pp. 375-387. ISSN 1755-2060

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Alsofyani, I. M. and Yusaf, Talal (2010) Adhesive wear and frictional characteristics of UHMWPE and HDPE sliding against different counterfaces under dry contact condition. Tribology, 4 (2). pp. 78-85. ISSN 1751-5831

adhesives

Yousif, Belal F. ORCID: https://orcid.org/0000-0003-3847-5469 (2012) Adhesive wear characteristics of natural fiber-reinforced composites. In: Wear of advanced materials. John Wiley & Sons, Inc., London, United Kingdom, pp. 61-97. ISBN 978-1-84821-352-4

ADR69

Thota, Narasimha and Epaarachchi, Jayantha and Lau, Kin Tak (2013) CAE simulation based methodology for airbag compliant vehicle front protection system development. International Journal of Vehicle Structures and Systems, 5 (3-4). pp. 95-104. ISSN 0975-3060

adsorption

Liu, Yi and Yan, Chunjie and Zhang, Zuhua and Wang, Hongquan and Zhou, Sen and Zhou, Wei (2016) A comparative study on fly ash, geopolymer and faujasite block for Pb removal from aqueous solution. Fuel, 185. pp. 181-189. ISSN 0016-2361

advanced manufacturing

Ku, H. (2011) The process of updating production engineering in an Australian regional university excellence in developing e-learning. In: 2011 International MultiConference of Engineers and Computer Scientists (IMECS 2011) , 16-18 Mar 2011, Kowloon, Hong Kong.

advanced robust

Awad, Z. K. and Gonzalez, F. and Aravinthan, T. (2010) Advanced robust design optimization of FRP sandwich floor panels. IOP Conference Series: Materials Science and Engineering, 10 (1). pp. 1-9. ISSN 1757-8981

AEHO

Manthey, Nathan William (2013) Development of hemp oil based bioresins for biocomposites. [Thesis (PhD/Research)]

aerodynamic

Schubel, P. J. and Crossley, R. J. (2012) Wind turbine blade design. Energies, 5 (9). pp. 3425-3449.

Schubel, P. J. and Crossley, R. J. (2012) Wind turbine blade design review. Wind Engineering, 36 (4). pp. 365-388. ISSN 0309-524X

aerogels

Zhuge, Yan (2013) A review of aerogels and their application as a multi-functional building material. Applied Mechanics and Materials, 253-255. pp. 564-567. ISSN 1660-9336

aeroplanes

The Boeing Company (2013) Signal monitoring system and methods of operating same. .

aerospace structures

Kahandawa, Gayan C. and Epaarachchi, Jayantha and Wang, Hao and Lau, K. T. (2012) Use of FBG sensors for SHM in aerospace structures. Photonic Sensors, 2 (3). pp. 203-214. ISSN 1674-9251

AFM

Cheng, Sha and Lau, Kin-Tak and Chen, Shougang and Chang, Xueting and Liu, Tao and Yin, Yansheng (2010) Microscopical observation of the marine bacterium vibrio natriegeus growth on metallic corrosion. Materials and Manufacturing Processes, 25 (5). pp. 293-297. ISSN 1042-6914

agglomeration

Islam, Md Mainul and Kim, Ho Sung (2008) Manufacture of syntactic foams using starch as binder: post-mold processing. Materials and Manufacturing Processes, 23 (8). pp. 884-892. ISSN 1042-6914

aggregate

Hussin, Manal (2012) An investigation into the effect of material composition on the fundamental properties of permeable concrete. [Thesis (PhD/Research)]

Lian, C. and Zhuge, Y. (2010) Optimum mix design of enhanced permeable concrete: an experimental investigation. Construction and Building Materials, 24 (12). pp. 2664-2671. ISSN 0950-0618

Lian, Chunqi and Zhuge, Yan (2009) Investigation of the effect of aggregate on the performance of permeable concrete. In: Challenges, opportunities, and solutions in structural engineering and construction. Taylor & Francis (CRC Press) / Balkema, Leiden, Netherlands, pp. 505-510. ISBN 978-0-415-56809-8

agriculture

Al-Sandooq, J. M. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Jensen, T. A. (2012) Tribological consideration in roller mill machines for agriculture applications. Surface Review and Letters, 19 (6). pp. 1250065-1. ISSN 0218-625X

Ag–Cu–Sn alloy

Ma, Xue and Li, Liangfeng and Zhang, Zuhua and Wang, Hao and Wang, Enze and Qiu, Tai (2015) Effects of rare earth La on microstructure and properties of Ag-21Cu-25Sn alloy ribbon prepared by melt spinning. Materials and Design, 83. pp. 1-5. ISSN 0264-1275

AIP refinement

Wang, Hao (2007) In-situ Si/Al composite produced by semisolid metal processing. Materials and Manufacturing Processes, 22 (5-6). pp. 696-699. ISSN 1042-6914

airbag compatibility

Thota, Narasimha and Epaarachchi, Jayantha and Lau, Kin Tak (2013) CAE simulation based methodology for airbag compliant vehicle front protection system development. International Journal of Vehicle Structures and Systems, 5 (3-4). pp. 95-104. ISSN 0975-3060

aircraft

Lau, Kin-Tak and Epaarachchi, Jayantha and Sudarshan, T. S. (2010) Sensors, actuators, and intelligent processing [Preface]. Materials and Manufacturing Processes, 25 (4). p. 211. ISSN 1042-6914

aircraft material

Lau, Alan K. T. and Ho, Mabel M. P. (2011) Recent research trend in natural-fibre composites. JEC Composites (67). pp. 50-52. ISSN 1639-965X

aircraft safety

The Boeing Company (2013) Signal monitoring system and methods of operating same. .

airflow

Wang, Xin and Lin, Tong and Wang, Xungai (2015) Use of airflow to improve the nanofibrous structure and quality of nanofibers from needleless electrospinning. Journal of Industrial Textiles, 45 (2). pp. 310-320. ISSN 1528-0837

AIS

Thota, Narasimha M. and Epaarachchi, Jayantha A. and Lau, Kin Tak (2014) Review of anthropomorphic test dummies for the evaluation of thoracic trauma due to blunt ballistic impacts. In: 8th Australasian Congress on Applied Mechanics, 24-26 Nov 2014, Melbourne, Australia.

Al-Si alloy

Yao, X. and Wang, H. (2006) Modeling of semisolid structure formation in controlled nucleation method. International Journal of Modern Physics B, 20 (25-27). pp. 4123-4128. ISSN 0217-9792

alkali activated cement

Yao, Xiao and Yang, Tao and Zhang, Zuhua (2016) Compressive strength development and shrinkage of alkali-activated fly ash–slag blends associated with efflorescence. Materials and Structures, 49 (7). pp. 2907-2918. ISSN 1359-5997

Zhang, Zuhua and Provis, John L. and Zou, Jin and Reid, Andrew and Wang, Hao (2016) Toward an indexing approach to evaluate fly ashes for geopolymer manufacture. Cement and Concrete Research, 85. pp. 163-173. ISSN 0008-8846

Ma, Xue and Zhang, Zuhua and Wang, Aiguo (2016) The transition of fly ash-based geopolymer gels into ordered structures and the effect on the compressive strength. Construction and Building Materials, 104. pp. 25-33. ISSN 0950-0618

Zhang, Zuhua and Provis, John L. and Reid, Andrew and Wang, Hao (2015) Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete. Cement and Concrete Composites, 62. pp. 97-105. ISSN 0958-9465

Zhang, Zuhua and Provis, John L. and Reid, Andrew and Wang, Hao (2014) Fly ash-based geopolymers: the relationship between composition, pore structure and efflorescence. Cement and Concrete Research, 64. pp. 30-41. ISSN 0008-8846

alkali activated material

Zhu, H. J. and Yao, X. and Zhang, Z. H. (2010) Study on non-cement based alkali activated material for oil and gas well cementing at low and moderate temperature. In: 1st International Conference on Advances in Chemically-Activated Materials (CAM 2010), 9-12 May 2010, Jinan, China.

alkali activation

Zhuang, Xiao Yu and Chen, Liang and Komarneni, Sridhar and Zhou, Chun Hui and Tong, Dong Shen and Yang, Hui Min and Yu, Wei Hua and Wang, Hao (2016) Fly ash-based geopolymer: clean production, properties and applications. Journal of Cleaner Production, 125. pp. 253-267. ISSN 0959-6526

Yang, Tao and Yao, Xiao and Zhang, Zuhua and Wang, Hao (2012) Mechanical property and structure of alkali-activated fly ash and slag blends. Journal of Sustainable Cement-Based Materials, 1 (4). pp. 167-178. ISSN 2165-0373

alkali treated

Ahmed, Mansur and Islam, Md Saiful and Ahsan, Qumrul and Islam, Md Mainul (2010) Physical and tensile properties of raw and treated silk fibres. In: 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010), 24-26 Sept 2010, Kottayam, Kerala, India.

alkali treatment

Manalo, Allan C. and Wani, Evans and Zulkarnain, Noor Azwa and Karunasena, Warna and Lau, Kin-tak (2015) Effects of alkali treatment and elevated temperature on the mechanical properties of bamboo fibre-polyester composites. Composites Part B: Engineering, 80 (1). pp. 73-83. ISSN 1359-8368

Kabir, Mohammad Mazedul and Islam, Md Mainul and Wang, Hao (2013) Mechanical and thermal properties of jute fibre reinforced composites. Journal of Multifunctional Composites, 1 (1). pp. 71-77. ISSN 2168-4278

Kabir, Mohammad Mazedul and Islam, Md Mainul and Wang, Hao (2010) Mechanical and thermal properties of untreated and chemically treated jute fibre reinforced composites. In: 1st International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2010) , 23-24 Dec 2010, Khulna, Bangladesh.

Wong, K. J. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Low, K. O. (2010) The effects of alkali treatment on the interfacial adhesion of bamboo fibres. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 224 (3). pp. 139-148. ISSN 1464-4207

alkali-activated binders

Zhang, Z. and Wang, H. (2015) Analysing the relation between pore structure and permeability of alkali-activated concrete binders. In: Handbook of alkali-activated cements, mortars and concretes. Woodhead Publishing Series in Civil and Structural Engineering, 54. Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 235-264. ISBN 978-1-78242-276-1

alkali-activated cement

Zhang, Zuhua and Wang, Hao (2016) The pore characteristics of geopolymer foam concrete and their impact on the compressive strength and modulus. Frontiers in Materials, 3 (Article 38).

Zhang, Zuhua and Li, Liangfeng and Ma, Xue and Wang, Hao (2016) Compositional, microstructural and mechanical properties of ambient condition cured alkali-activated cement. Construction and Building Materials, 113. pp. 237-245. ISSN 0950-0618

alkali-activated materials

Zhu, Huajun and Zhang, Zuhua and Zhu, Yingcan and Tian, Liang (2014) Durability of alkali-activated fly ash concrete: chloride penetration in pastes and mortars. Construction and Building Materials, 65. pp. 51-59. ISSN 0950-0618

alkali-activated metakaolin (AAM)

Zhang, Z. and Wang, H. (2015) Alkali-activated cements for protective coating of OPC concrete. In: Handbook of alkali-activated cements, mortars and concretes. Woodhead Publishing Series in Civil and Structural Engineering, 54. Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 605-626. ISBN 978-1-78242-276-1

alkali-activation

Zhang, Z. H. and Zhu, H. J. and Zhou, C. H. and Wang, H. (2016) Geopolymer from Kaolin in China: an overview. Applied Clay Science, 119 (1). pp. 31-41. ISSN 0169-1317

alkaline activation

Yang, Tao and Yao, Xiao and Zhang, Zuhua (2014) Geopolymer prepared with high-magnesium nickel slag: characterization of properties and microstructure. Construction and Building Materials, 59. pp. 188-194. ISSN 0950-0618

Yang, T. and Yao, X. and Zhang, Z. and Wang, H. (2012) Effects of ground granulated blast furnace slag on the mechanical and microstructure of fly ash-based geopolymer binders. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

alloy

Wang, Hao and Davidson, C. J. and StJohn, David H. (2004) Semisolid microstructural evolution of AlSi7Mg during partial remelting. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing , 368 (1-2). pp. 159-167. ISSN 0921-5093

alloy composition

Wang, Hao (2010) The role of casting temperature in preparation of bulk metallic glasses. In: 6th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC 2009): Processing, Fabrication, Properties, Applications, 25-29 Aug 2009, Berlin, Germany.

alloys

Etaati, Amir and Dehghani, Kamran (2013) A study on hot deformation behavior of Ni-42.5Ti-7.5Cu alloy. Materials Chemistry and Physics, 140 (1). pp. 208-215. ISSN 0254-0584

Easton, Mark A. and Wang, Hao and Grandfield, John and Davidson, Cameron J. and StJohn, David H. and Sweet, Lisa D. and Couper, Malcolm J. (2012) Observation and prediction of the hot tear susceptibility of ternary Al-Si-Mg alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science , 43 (9). pp. 3227-3238. ISSN 1073-5623

Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275

Ning, Zhiliang and Wu, Peilian and Wang, Hao and Cao, Fuyang and Sun, Jianfei (2007) Effect of pouring temperature on thixotropic microstructure formation of AZ91. Rare Metals, 26 (S1). pp. 180-184. ISSN 1001-0521

Wang, Hao and Zhang, M. X. and Shi, Z. M. and Yang, Ke (2006) Biocorrosion behaviour of magnesium alloys under pseudo-physiological conditions. Tissue Engineering, 12 (4). p. 1067. ISSN 1076-3279

AlSi7Mgn

Wang, Hao and Davidson, C. J. and StJohn, David H. (2004) Semisolid microstructural evolution of AlSi7Mg during partial remelting. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing , 368 (1-2). pp. 159-167. ISSN 0921-5093

alternative assembly

Wang, Li-li and Zhang, Tao and Yan, Hong-quiang and Peng, Mao and Fang, Zheng-ping and Li, Yan and Wang, Hao (2014) Flame-retardant coating by alternate assembly of poly(vinylphosphonic acid) and polyethylenimine for ramie fabrics. Chinese Journal of Polymer Science, 32 (3). pp. 305-314. ISSN 0256-7679

alternative materials

Manalo, A. and Aravinthan, T. and Karunasena, W. and Ticoalu, A. (2010) A review of alternative materials for replacing existing timber sleepers. Composite Structures, 92 (3). pp. 603-611. ISSN 0263-8223

alternative sleeper materials

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan (2014) Failures of mainline railway sleepers and suggested remedies – review of current practice. Engineering Failure Analysis, 44. pp. 17-35. ISSN 1350-6307

alumina

Albdiry, Mushtaq and Alethari, Haydar (2012) Effect of alumina inclusions on microstructure and mechanical properties of 62 WC, 32 (Ti-W) C and 6 Co compacts. International Journal of Microstructure and Materials Properties, 7 (4). pp. 329-340. ISSN 1741-8410

Zhu, Yue-Feng and Shi, Lei and Liang, Ji and Hui, David and Lau, Kin-Tak (2008) Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics. Composites Part B: Engineering, 39 (7-8). pp. 1136-1141. ISSN 1359-8368

alumina ceramics

Zhu, Yue-Feng and Shi, Lei and Liang, Ji and Hui, David and Lau, Kin-Tak (2008) Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics. Composites Part B: Engineering, 39 (7-8). pp. 1136-1141. ISSN 1359-8368

Aluminium

Khatibi, A. Afaghi and Chevali, V. ORCID: https://orcid.org/0000-0002-5648-0344 and Feih, S. and Mouritz, A. P. (2016) Probability analysis of the fire structural resistance of aluminium plate. Fire Safety Journal, 83. pp. 15-24. ISSN 0379-7112

aluminium fiber

Epaarachchi, J. and Ku, H. and Gohel, K. (2010) A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites. Journal of Composite Materials, 44 (6). pp. 779-788. ISSN 0021-9983

aluminium powder

Epaarachchi, Jayantha A. and Reushle, Matthew T. (2010) Performance of aluminium/vinylester particulate composite. In: PRICM7: 7th Pacific Rim International Conference on Advanced Materials and Processing, 2-6 Aug 2010, Cairns, Australia.

aluminium-silicon alloy

Wang, Hao (2007) In-situ Si/Al composite produced by semisolid metal processing. Materials and Manufacturing Processes, 22 (5-6). pp. 696-699. ISSN 1042-6914

aluminosilicates

Yang, Tao and Yao, Xiao and Zhang, Zuhua and Wang, Hao (2012) Mechanical property and structure of alkali-activated fly ash and slag blends. Journal of Sustainable Cement-Based Materials, 1 (4). pp. 167-178. ISSN 2165-0373

aluminum

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

aluminum casting

Easton, Mark A. and Wang, Hao and Grandfield, John and Davidson, Cameron J. and StJohn, David H. and Sweet, Lisa D. and Couper, Malcolm J. (2012) Observation and prediction of the hot tear susceptibility of ternary Al-Si-Mg alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science , 43 (9). pp. 3227-3238. ISSN 1073-5623

ambient curing

Reed, Mark and Lokuge, Weena and Karunasena, Warna (2014) Fibre reinforced geopolymer concrete with ambient curing for in-situ applications. Journal of Materials Science, 49 (12). pp. 4297-4304. ISSN 0022-2461

ambient vibration

Kodikara, K. A. T. L. and Chan, T. H. T. and Nguyen, T. and Thambiratnam, D. P. (2016) Model updating of real structures with ambient vibration data. Journal of Civil Structural Health Monitoring, 6 (3). pp. 329-341. ISSN 2190-5452

Kodikara, K.A. Tharindu L. and Chan, Tommy H.T. and Nguyen, Andy and Thambiratnam, David P. (2016) Model updating incorporating measured response uncertainties and confidence levels of tuning parameters. International Journal of Lifecycle Performance Engineering, 2 (1/2). pp. 61-78. ISSN 2043-8648

amines

Yan, Hongqiang and Wang, Huaqing and Cheng, Jie and Fang, Zhengping and Wang, Hao (2015) Effect of iron acetylacetonate on the crosslink structure, thermal and flammability properties of novel aromatic diamine-based benzoxazines containing cyano group. RSC Advances, 5 (24). pp. 18538-18545.

amorphous iron oxide

Zhou, Wei and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Liang, Fengli and Xu, Hong-Yi and Motuzas, Julius and Julbe, Anne and Zhu, Zhonghua (2011) Amorphous iron oxide decorated 3D heterostructured electrode for highly efficient oxygen reduction. Chemistry of Materials, 23 (18). pp. 4193-4198. ISSN 0897-4756

amorphous matrices

Zhu, Zhengwang and Zhang, Haifeng and Wang, Hao and Ding, Bingzhe and Hu, Zhuang-Qi and Huang, Han (2009) Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting [+ Erratum]. Journal of Materials Research, 24 (10). pp. 3108-3115. ISSN 0884-2914

analysis

Awad, Ziad K. and Yusaf, Talal F. (2011) Finite element analysis of fibre reinforce concrete beam subject to high temperature by using EURO-code models. Key Engineering Materials, 471-472. pp. 343-348. ISSN 1013-9826

Analytic Hierarchy Process

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Aravinthan, Thiru and Van Erp, Gerard (2016) Properties of epoxy polymer concrete matrix: Effect of resin-to-filler ratio and determination of optimal mix for composite railway sleepers. Construction and Building Materials, 124. pp. 287-300. ISSN 0950-0618

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Aravinthan, Thiru and Van Erp, Gerard (2015) Optimal polymer matrix coating for composite railway sleeper – analytic hierarchy process. In: Joint conference of the 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & the 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015), 14-16 Dec 2015, Nanjing, China.

analytical chemistry

Dohnal, Ludek and Faigl, Paul (2006) Classical or 'robust' linear regression? [Klasická nebo robustní lineární regrese?]. In: 9th Yearly Seminar on Securing Quality of Analytical Results, 27-29 Mar 2006, Komorni Lhotka, Czech Republic.

Analytical model

Li, Xuwei and Nemcik, Jan and Mirzaghorbanali, Ali and Aziz, Naj and Rasekh, Haleh (2015) Analytical model of shear behaviour of a fully grouted cable bolt subjected to shearing. International Journal of Rock Mechanics and Mining Sciences, 80. pp. 31-39. ISSN 1365-1609

analytical modelling

Matveev, M. Y. and Schubel, P. J. and Long, A. C. and Jones, I. A. (2016) Understanding the buckling behaviour of steered tows in automated dry fibre placement (ADFP). Composites Part A: Applied Science and Manufacturing, 90. pp. 451-456. ISSN 1359-835X

Islam, Md Mainul and Kim, Ho Sung (2007) Manufacture of syntactic foams: pre-mold processing. Materials and Manufacturing Processes, 22 (1). pp. 28-36. ISSN 1042-6914

Islam, Md Mainul and Kim, Ho Sung (2007) Syntactic foams consolidated with starch: modelling for pre-mould processing. Advanced Materials Research, 29-30. pp. 165-168. ISSN 1022-6680

Islam, Md Mainul and Kim, Ho Sung (2006) Syntactic foams consolidated with starch: modelling for pre-mould processing. In: 4th International Conference on Advanced Materials & Processing (ICAMP-4), 10-13 Dec 2006, Hamilton, New Zealand.

analytical predictions

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

analytical results

Epaarachchi, J. and Ku, H. and Gohel, K. (2010) A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites. Journal of Composite Materials, 44 (6). pp. 779-788. ISSN 0021-9983

analytical techniques

Maranan, Ginghis and Manalo, Allan and Karunasena, Karu and Benmokrane, Brahim (2015) Bond stress-slip behavior: case of GFRP bars in geopolymer concrete. Journal of Materials in Civil Engineering, 27 (1). pp. 4014116-1. ISSN 0899-1561

anchor head

Maranan, G.B. and Manalo, A.C. and Karunasena, W. and Benmokrane, B. (2015) Pullout behaviour of GFRP bars with anchor head in geopolymer concrete. Composite Structures, 132. pp. 1113-1121. ISSN 0263-8223

Maranan, Ginghis B. and Manalo, Allan C. and Karunasena, Karu and Benmokrane, Brahim (2014) Bond-slip behaviour of GFRP bars into geopolymer concrete. In: 7th International Conference on FRP Composites in Civil Engineering (CICE 2014), 20-22 Aug 2014, Vancouver, Canada.

anchorage

Maranan, G.B. and Manalo, A.C. and Karunasena, W. and Benmokrane, B. (2015) Pullout behaviour of GFRP bars with anchor head in geopolymer concrete. Composite Structures, 132. pp. 1113-1121. ISSN 0263-8223

angle measurement

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

animal fibre

Ho, Mei-Po and Lau, Kin-Tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

annealing

Mo, Chun-li and Li, Qiang and Guo, Xu-ming and Wang, Hao (2012) Numerical simulation the temperature field of the multi-coil batch during annealing process in Bell-type furnace. In: 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012), 6 Jul 2012, Zhuhai, China.

ANSYS

Kalendher, F. and Setunge, S. and Mohseni, H. and Lokuge, W. (2015) Deriving damage indices for concrete girder bridges subjected to flood loading. In: 6th International Conference on Structural Engineering and Construction Management (CSECM) 2015, 11-14 Dec 2015, Kandy, Sri Lanka.

anthropomorphic test dummy

Thota, Narasimha M. and Epaarachchi, Jayantha A. and Lau, Kin Tak (2014) Review of anthropomorphic test dummies for the evaluation of thoracic trauma due to blunt ballistic impacts. In: 8th Australasian Congress on Applied Mechanics, 24-26 Nov 2014, Melbourne, Australia.

antibacterial activity

Khan, Belas Ahmed and Wang, Jing and Warner, Philip and Wang, Hao (2015) Antibacterial properties of hemp hurd powder against E. coli. Journal of Applied Polymer Science, 132 (10). 41588/1-41588/6. ISSN 0021-8995

Khan, Belas Ahmed and Warner, Philip and Wang, Hao (2014) Antibacterial properties of hemp and other natural fibre plants: a review. BioResources, 9 (2). pp. 3642-3659.

anticorrosion

Zhang, Zuhua and Yao, Xiao and Zhu, Huajun (2010) Potential application of geopolymers as protection coatings for marine concrete I. Basic properties. Applied Clay Science, 49 (1/2). pp. 1-6. ISSN 0169-1317

Zhang, Zuhua and Yao, Xiao and Zhu, Huajun (2010) Potential application of geopolymers as protection coatings for marine concrete II. Microstructure and anticorrosion mechanism. Applied Clay Science , 49 (1/2). pp. 7-12. ISSN 0169-1317

antimony telluride

Hong, Min and Chen, Zhi G. ORCID: https://orcid.org/0000-0002-9309-7993 and Yang, Lei and Zou, Jin (2016) BixSb2_xTe3 nanoplates with enhanced thermoelectric performance due to sufficiently decoupled electronic transport properties and strong wide-frequency phonon scatterings. Nano Energy, 20. pp. 144-155. ISSN 2211-2855

application

Al Azzawi, W. S. and Epaarachchi, Jayantha Ananda and Islam, M. Mainul and Leng, Jinsong (2016) Shape memory polymers and their applications. In: Structural health monitoring technologies and next-generation smart composite structures. Composite Materials: Analysis and Design. Taylor & Francis (CRC Press), Boca Raton, Florida, pp. 447-478. ISBN 978-1-4822-2691-1

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Van Erp, Gerard and Aravinthan, Thiru and Kaewunruen, Sakdirat and Remennikov, Alex (2015) Composite railway sleepers – recent developments, challenges and future prospects. Composite Structures, 134. pp. 158-168. ISSN 0263-8223

applications

Bajracharya, Rohan M. and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2014) Glass fibre and recycled mixed plastic wastes: recent developments and applications. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 09-12 Dec 2014, Byron Bay, Australia.

Aravinthan, T. (2012) Composites in civil infrastructure: R & D to applications. In: 6th International Composites Conference (ACUN 6): Composites and Nanocomposites in Civil, Offshore and Mining Infrastructure , 14-16 Nov 2012, Melbourne, Australia.

applied voltages

Wang, Xin and Niu, Haitao and Wang, Xungai and Lin, Tong (2012) Needleless electrospinning of uniform nanofibers using spiral coil spinnerets. Journal of Nanomaterials, 2012. pp. 1-9. ISSN 1687-4110

Wang, Xin and Niu, Haitao and Lin, Tong and Wang, Xungai (2009) Needleless electrospinning of nanofibers with a conical wire coil. Polymer Engineering and Science, 49 (8). pp. 1582-1586. ISSN 0032-3888

Araldite

Ku, H. S. (2008) Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation. Journal of Electromagnetic Waves and Applications, 22 (1). pp. 69-84. ISSN 0920-5071

Araldite and carbon fibre

Ku, Harry S. and Yusaf, Talal (2008) Processing of composites using variable and fixed frequency microwave facilities. Progress in Electromagnetic Research B, PIERB . pp. 185-205. ISSN 1937-6472

arenga pinnata

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2013) A review on the characteristics of gomuti fibre and its composites with thermoset resins. Journal of Reinforced Plastics and Composites, 32 (2). pp. 124-136. ISSN 0731-6844

arenga pinnata fibre

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2011) Experimental investigation into gomuti fibres/polyester composites. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

aromatic compounds

Yan, Hongqiang and Wang, Huaqing and Cheng, Jie and Fang, Zhengping and Wang, Hao (2015) Effect of iron acetylacetonate on the crosslink structure, thermal and flammability properties of novel aromatic diamine-based benzoxazines containing cyano group. RSC Advances, 5 (24). pp. 18538-18545.

articular cartilages

Lau, Kin-tak and Ho, Mei-po and Au-Yeung, Chi-ting and Cheung, Hoi-yan (2010) Biocomposites: their multifunctionality. International Journal of Smart and Nano Materials, 1 (1). pp. 13-27. ISSN 1947-5411

articulation

Morgan, M. J. and Fulcher, R. L. and Ku, H. S. (1998) Articulation, credit transfer and flexible delivery of engineering degree courses: Australia, Malaysia and Hong Kong. Jurutera: Institution of Engineers Malaysia Monthly Bulletin, 1998 (1). pp. 57-67. ISSN 0126-513X

artificial neural network

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2013) Development of artificial neural network model in predicting performance of the smart wind turbine blade. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

artificial neural network algorithm

Kahandawa, Gayan C. and Epaarachchi, Jayantha and Lau, K. T. and Canning, John (2013) Estimation of strain of distorted FBG sensor spectra using a fixed FBG filter circuit and an artificial neural network. In: IEEE 8th International Conference on Intelligent Sensors, Sensor Networks and Information Processing (ISSNIP 2013): Sensing the Future, 2-5 Apr 2013, Melbourne, Australia.

artificial neural networks

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. and Lau, K. T. (2012) Optimized FBG sensor network for efficient detection of a delamination in FRP structures. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Artificial Weathering

Chevali, Venkata S. ORCID: https://orcid.org/0000-0002-5648-0344 and Nerenz, Brent A. and Ulven, Chad A. (2012) Acrylonitrile butadiene styrene (ABS)/lignocellulosic fiber biocomposite: Effect of artificial weathering on impact properties. Journal of Biobased Materials and Bioenergy, 6 (1). pp. 42-50. ISSN 1556-6560

as-cast

Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275

AS1684

Karunasena, W. and Leitch, C. J. (2008) Investigation on role and function of noggings in residential timber frame construction. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

assessment

Manalo, Allan and Aravinthan, Thiru (2012) Peer assisted learning in an online postgraduate course on engineered fibre composites. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

assessment tools

Aravinthan, Thiru (2010) Incorporating a variety of assessment tools in a web-based postgraduate course developed for practicing engineers. In: 21st Annual Conference of the Australasian Association for Engineering Education (AaeE 2010): Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

asymmetrical beam

Manalo, A. C. (2013) The effect of shear span-to-depth ratio and test set-up on the behavior of fibre composite sandwich structure. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013): Towards Sustainable Infrastructure with FRP Composites, 11-13 Dec 2013, Melbourne, Australia .

Manalo, A. C. (2013) Behaviour of fibre composite sandwich structures under short and asymmetrical beam shear tests. Composite Structures, 99. pp. 339-349. ISSN 0263-8223

asymmetrical beam shear test

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) In-plane shear behaviour of fibre composite sandwich beams using asymmetrical beam shear test. Construction and Building Materials, 24 (10). pp. 1952-1960. ISSN 0950-0618

asymmetrical beams

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Warna (2010) Shear behavior of glue-laminated composite sandwich beams. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

ATL

Crossley, R. J. and Schubel, P. J. and Warrior, N. A. (2011) Experimental determination and control of prepreg tack for automated manufacture. Plastics, Rubber and Composites, 40 (6-7). pp. 363-368. ISSN 1465-8011

atomic force microscopes

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

Atomic Force Microscopy

Zhou, Yan and Pan, Guoshun and Shi, Xiaolei ORCID: https://orcid.org/0000-0003-0905-2547 and Gong, Hua and Xu, Li and Zou, Chunli (2015) AFM and XPS studies on material removal mechanism of sapphire wafer during chemical mechanical polishing (CMP). Journal of Materials Science: Materials in Electronics, 26 (12). pp. 9921-9928. ISSN 0957-4522

atomic size

Fu, H. M. and Zhang, H. F. and Wang, H. and Hu, Z. Q. (2008) Cu-based bulk amorphous alloy with larger glass-forming ability and supercooled liquid region. Journal of Alloys and Compounds, 458 (1-2). pp. 390-393. ISSN 0925-8388

Atomic Step

Zhou, Yan and Pan, Guoshun and Shi, Xiaolei ORCID: https://orcid.org/0000-0003-0905-2547 and Gong, Hua and Xu, Li and Zou, Chunli (2015) AFM and XPS studies on material removal mechanism of sapphire wafer during chemical mechanical polishing (CMP). Journal of Materials Science: Materials in Electronics, 26 (12). pp. 9921-9928. ISSN 0957-4522

ATR-FTIR

Ma, Pibo and Wang, Xin and Xu, Weilin and Cao, Genyang (2009) Application of corona discharge on desizing of polyvinyl alcohol on cotton fabrics. Journal of Applied Polymer Science, 114 (5). pp. 2887-2892. ISSN 0021-8995

AU catalysts

Liao, Z. M. and Xu, H. Y. and Sun, W. and Guo, Y. N. and Yang, L. and Chen, Z. G. ORCID: https://orcid.org/0000-0002-9309-7993 and Zou, J. and Lu, Z. Y. and Chen, P. P. and Lu, W. (2012) Effects of Au catalyst on GaAs (111)B surface during annealing. In: 2012 Conference on Optoelectronic and Microelectronic Materials and Devices (COMMAD 2012), 12-14 Dec 2012, Melbourne, Australia.

Au thin films

Liao, Z. M. and Xu, H. Y. and Sun, W. and Guo, Y. N. and Yang, L. and Chen, Z. G. ORCID: https://orcid.org/0000-0002-9309-7993 and Zou, J. and Lu, Z. Y. and Chen, P. P. and Lu, W. (2012) Effects of Au catalyst on GaAs (111)B surface during annealing. In: 2012 Conference on Optoelectronic and Microelectronic Materials and Devices (COMMAD 2012), 12-14 Dec 2012, Melbourne, Australia.

Australia

Ross, Pauline and McGowan, Carol G. and Styger, Lee E. J. (2012) A comparison of theory and practice in market intelligence gathering for Australian micro-businesses and SMEs. In: 19th International Business Research Conference, 19-21 Nov 2012, Melbourne, Australia .

Khattak, Hamid and Ku, Harry and Goh, Steven (2012) Courses for teaching leadership capacity in professional engineering degrees in Australia and Europe. European Journal of Engineering Education, 37 (3). pp. 279-296. ISSN 0304-3797

Charles, Michael and Furneaux, Craig and Pillay, Janet and Thorpe, David and Parades Castello, Cynthya and Brown, Kerry (2007) Uptake of an OHS Code of Practice by Australian construction firms. In: CIB World Building Congress 2007: Construction for Development, 14-17 May 2007, Cape Town, South Africa.

Australian

Charles, Michael and Furneaux, Craig and Pillay, Janet and Thorpe, David and Parades Castello, Cynthya and Brown, Kerry (2007) Uptake of an OHS Code of Practice by Australian construction firms. In: CIB World Building Congress 2007: Construction for Development, 14-17 May 2007, Cape Town, South Africa.

automated fibre Placement (AFP)

Matveev, M. Y. and Schubel, P. J. and Long, A. C. and Jones, I. A. (2016) Understanding the buckling behaviour of steered tows in automated dry fibre placement (ADFP). Composites Part A: Applied Science and Manufacturing, 90. pp. 451-456. ISSN 1359-835X

automated manufacture

Crossley, R. J. and Schubel, P. J. and Warrior, N. A. (2011) Experimental determination and control of prepreg tack for automated manufacture. Plastics, Rubber and Composites, 40 (6-7). pp. 363-368. ISSN 1465-8011

automated model updating

Kodikara, K.A. Tharindu L. and Chan, Tommy H.T. and Nguyen, Andy and Thambiratnam, David P. (2016) Model updating incorporating measured response uncertainties and confidence levels of tuning parameters. International Journal of Lifecycle Performance Engineering, 2 (1/2). pp. 61-78. ISSN 2043-8648

automation

Matveev, M. Y. and Schubel, P. J. and Long, A. C. and Jones, I. A. (2016) Understanding the buckling behaviour of steered tows in automated dry fibre placement (ADFP). Composites Part A: Applied Science and Manufacturing, 90. pp. 451-456. ISSN 1359-835X

Crossley, R. J. and Schubel, P. J. and De Focatiis, D. S. A. (2013) Time-temperature equivalence in the tack and dynamic stiffness of polymer prepreg and its application to automated composites manufacturing. Composites Part A: Applied Science and Manufacturing, 52. pp. 126-133. ISSN 1359-835X

Schubel, P. J. (2012) Cost modelling in polymer composite applications: case study – analysis of existing and automated manufacturing processes for a large wind turbine blade. Composites Part B: Engineering, 43 (3). pp. 953-960. ISSN 1359-8368

automobile parts

Nirmal, Umar and Hashim, Jamil and Rilling, Dirk and Brevern, P. V. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2012) Tribo performance of T-BFRP composite subjected to dry/wet contact conditions. In: Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Advances in Materials Science (2). Apple Academic Press (CRC Press), Toronto, Canada, pp. 311-325. ISBN 978-1-9268-9516-1

average size

Wang, Shujun and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Cole, Ivan and Li, Qin (2015) Structural evolution of graphene quantum dots during thermal decomposition of citric acid and the corresponding photoluminescence. Carbon, 82 (C). pp. 304-313. ISSN 0008-6223

axial

Guades, E. J. and Sirimanna, C. S. and Aravinthan, T. and Islam, M. M. (2011) Behaviour of fibre composite pile under axial compression load. In: 21st Australasian Conference on the Mechanics of Structures and MateriaIs (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

B. Environmental degradation

Anjang, A. and Chevali, V. S. ORCID: https://orcid.org/0000-0002-5648-0344 and Feih, S. and Mouritz, A. P. (2016) Deterioration of the fire structural resistance of sandwich composite under tension due to water absorption. Composites Part A: Applied Science and Manufacturing, 87. pp. 263-270. ISSN 1359-835X

B. Thermomechanical

Anjang, A. and Chevali, V. S. ORCID: https://orcid.org/0000-0002-5648-0344 and Feih, S. and Mouritz, A. P. (2016) Deterioration of the fire structural resistance of sandwich composite under tension due to water absorption. Composites Part A: Applied Science and Manufacturing, 87. pp. 263-270. ISSN 1359-835X

back-propagation

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2013) Development of artificial neural network model in predicting performance of the smart wind turbine blade. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

backpack load

Lau, Sindy Mei-Ling and Lau, Kin-Tak and Yin, Yan-Sheng and Li, Lan and Wong, May and Chan, Kevin and Chen, William (2010) A shape memory alloy energy absorber for backpack design. Materials and Manufacturing Processes, 25 (4). pp. 281-286. ISSN 1042-6914

balsa

Anjang, A. and Chevali, V. S. ORCID: https://orcid.org/0000-0002-5648-0344 and Kandare, E. and Mouritz, A. P. and Feih, S. (2014) Tension modelling and testing of sandwich composites in fire. Composite Structures, 113. pp. 437-445. ISSN 0263-8223

bamboo

Manalo, Allan C. and Wani, Evans and Zulkarnain, Noor Azwa and Karunasena, Warna and Lau, Kin-tak (2015) Effects of alkali treatment and elevated temperature on the mechanical properties of bamboo fibre-polyester composites. Composites Part B: Engineering, 80 (1). pp. 73-83. ISSN 1359-8368

Manalo, A. C. and Karunasena, W. and Lau, K. T. (2013) Mechanical properties of bamboo fiber-polyester composites. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

bamboo charcoal

Ho, M. P. and Wang, H. and Lau, K. T. and Jayaraman, K. and Bhattacharyya, D. (2012) Mechanical properties of a bamboo charcoal reinforced polylactic acid composite. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

bamboo fibre

Zulkarnain, Azwa (2014) Moisture absorption and hydrothermal aging in bamboo fibre/polyester composite. In: Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World, 7–9 Apr 2014, Newcastle, Australia.

bamboo fibres

Wong, K. J. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Low, K. O. (2010) The effects of alkali treatment on the interfacial adhesion of bamboo fibres. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 224 (3). pp. 139-148. ISSN 1464-4207

band structures

Hong, Min and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Yang, Lei and Han, Guang and Zou, Jin (2015) Enhanced thermoelectric performance of ultrathin Bi2Se3 nanosheets through thickness control. Advanced Electronic Materials, 1 (6).

barnacles

Ismail, S. B. and Salleh, Z. and Yusop, M. Y.M. and Fakhruradzi, F. H. (2013) Monitoring of barnacle growth on the underwater hull of an FRP boat using image processing. Procedia Computer Science, 23. pp. 146-151. ISSN 1877-0509

basalt fibre

Chen, S. and Zhuge, Yan and Lu, G. X. and Eising, D. R. (2014) Flexural behavior of basalt fibre reinforced ferrocement composite. In: 23rd Australiasian Conference on the Mechanics of Structures and Materials (ACMSM 23), 9-12 Dec 2014, Byron Bay, Australia.

basalt meshes

Chen, S. and Zhuge, Yan and Lu, G. X. and Eising, D. R. (2014) Flexural behavior of basalt fibre reinforced ferrocement composite. In: 23rd Australiasian Conference on the Mechanics of Structures and Materials (ACMSM 23), 9-12 Dec 2014, Byron Bay, Australia.

base catalyst

Wang, Jing and Sutti, Alessandra and Wang, Xungai and Lin, Tong (2011) Fast responsive and morphologically robust thermo-responsive hydrogel nanofibres from poly(N-isopropylacrylamide) and POSS crosslinker. Soft Matter, 7 (9). pp. 4364-4369. ISSN 1744-683X

baseball

Thota, Narasimha and Epaarachchi, Jayantha and Lau, Kin Tak (2015) Evaluation of the blunt thoracic trauma caused by solid sports ball impacts. Journal of Biomechanical Science and Engineering, 10 (2).

Thota, Narasimha M. and Epaarachchi, Jayantha A. and Lau, Kin Tak (2014) Evaluation of the blunt thoracic trauma due to baseball impacts – review of the Blunt Criterion. In: 8th Australasian Congress on Applied Mechanics, 24-26 Nov 2014, Melbourne, Australia.

bast fibre

Kabir, M. M. and Wang, H. and Cardona, F. and Aravinthan, T. (2011) Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

batch reactor

Cooney, T. I. and Cardona, F. and Tran-Cong, T. (2011) Kinetics of in situ epoxidation of hemp oil under heterogeneous reaction conditions: an overview with preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27-29 Apr 2011, Brisbane, Australia.

batteries

Helwig, Andreas and Ahfock, Tony L. (2009) Ultra-capacitor assisted battery storage for remote area power supplies: a case study. In: AUPEC 2009: Sustainable Energy Technologies and Systems, 27-30 Sep 2009, Adelaide, Australia.

battery storage

Helwig, Andreas and Ahfock, Tony L. (2009) Ultra-capacitor assisted battery storage for remote area power supplies: a case study. In: AUPEC 2009: Sustainable Energy Technologies and Systems, 27-30 Sep 2009, Adelaide, Australia.

beam

Manalo, Allan and Sirimanna, Chamila and Karunasena, Warna and McGarva, Lance and Falzon, Paul (2016) Pre-impregnated carbon fibre reinforced composite system for patch repair of steel I-beams. Construction and Building Materials, 105. pp. 365-376. ISSN 0950-0618

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2010) Investigation of frequency characteristics of GFRP/phenolic sandwich beams. In: Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

beam cross section

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

beam tests

Wang, Bo and Teng, J. G. and De Lorenzis, Laura and Zhou, Li-Min and Ou, Jinping and Jin, Wei and Lau, K. T. (2009) Strain monitoring of RC members strengthened with smart NSM FRP bars. Construction and Building Materials, 23 (4). pp. 1698-1711. ISSN 0950-0618

beams

Van Erp, Gerard and Cattell, Craig and Heldt, Tim (2005) Fibre composite structures in Australia's civil engineering market: an anatomy of innovation. Structural Control and Health Monitoring, 7 (3). pp. 150-160. ISSN 1365-0556

beams and girders

Wang, Bo and Teng, J. G. and De Lorenzis, Laura and Zhou, Li-Min and Ou, Jinping and Jin, Wei and Lau, K. T. (2009) Strain monitoring of RC members strengthened with smart NSM FRP bars. Construction and Building Materials, 23 (4). pp. 1698-1711. ISSN 0950-0618

behaviour

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2011) Temperature effects on full scale FRP bridge using innovative composite components. In: 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), 27-29 Sep 2010, Beijing, China.

Ning, Zhiliang and Wu, Peilian and Wang, Hao and Cao, Fuyang and Sun, Jianfei (2007) Effect of pouring temperature on thixotropic microstructure formation of AZ91. Rare Metals, 26 (S1). pp. 180-184. ISSN 1001-0521

bell-type furnace

Mo, Chun-li and Li, Qiang and Guo, Xu-ming and Wang, Hao (2012) Numerical simulation the temperature field of the multi-coil batch during annealing process in Bell-type furnace. In: 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012), 6 Jul 2012, Zhuhai, China.

bending

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2009) Flexural behaviour of laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

bending behaviour

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Manalo, Allan (2013) Geometry and restraint effects on the bending behaviour of the glass fibre reinforced polymer sandwich slabs under point load. Materials and Design, 45. pp. 125-134. ISSN 0264-1275

bending stiffness

Choy, Y. S. and Liu, Y. and Cheung, H. Y. and Xi, Q. and Lau, K. T. (2012) Development of composite plate for compact silencer design. Journal of Sound and Vibration, 331 (10). pp. 2348-2364. ISSN 0022-460X

Choy, Y. S. and Liu, Y. and Lau, K. T. (2012) Duct noise control by using very light composite plate. Advanced Materials Research, 410. pp. 361-365. ISSN 1022-6680

bending strength

Ku, H. and Trada, M. and Nixon, R. and Wong, P. (2010) Flexural properties of phenolic resin reinforced with glass powder: preliminary results. Journal of Applied Polymer Science, 116 (1). pp. 347-354. ISSN 0021-8995

bending stress

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2011) The implementation of statistical inference to study the bending strength of sustainable hybrid sandwich panel composite. Advanced Material Research, 250-253 (1-Apr). pp. 956-961.

benzoxazine

Yan, Hongquiang and Sun, Chuang and Fang, Zhengping and Liu, Xiaoqing and Zhu, Jin and Wang, Hao (2016) Synthesis of an intrinsically flame retardant bio-based benzoxazine resin. Polymer, 97. pp. 418-427. ISSN 0032-3861

betelnut fibre

Nirmal, Umar and Jamil, Nadia and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Rilling, Dirk and Brevern, P. V. (2010) The potential of using treated betelnut fibres as reinforcement for tribo-bio polymeric composites subjected to dry/wet contact conditions. In: ICNP 2010: Macro to Nano Scales, 24-26 Sep 2010, Kottayam, India.

betelnut fibres

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Nirmal, Umar and Wong, K. J. (2010) Three-body abrasion on wear and frictional performance of treated betelnut fibre reinforced epoxy (T-BFRE) composite. Materials and Design, 31 (9). pp. 4514-4521. ISSN 0264-1275

betz limit

Schubel, P. J. and Crossley, R. J. (2012) Wind turbine blade design. Energies, 5 (9). pp. 3425-3449.

Schubel, P. J. and Crossley, R. J. (2012) Wind turbine blade design review. Wind Engineering, 36 (4). pp. 365-388. ISSN 0309-524X

Bi2Se3 nanosheets

Hong, Min and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Yang, Lei and Han, Guang and Zou, Jin (2015) Enhanced thermoelectric performance of ultrathin Bi2Se3 nanosheets through thickness control. Advanced Electronic Materials, 1 (6).

Bi2Te3

Hong, Min and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Yang, Lei and Zou, Jin (2016) Enhancing thermoelectric performance of Bi2Te3-based nanostructures through rational structure design. Nanoscale, 8 (16). pp. 8681-8686. ISSN 2040-3364

Bi2Te3−xSex

Hong, Min and Chasapis, Thomas C. and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Yang, Lei and Kanatzidis, Mercouri G. and Snyder, G. Jeffrey and Zou, Jin (2016) n-Type Bi2Te3–xSex nanoplates with enhanced thermoelectric efficiency driven by wide-frequency phonon scatterings and synergistic carrier scatterings. ACS Nano, 10 (4). pp. 4719-4727. ISSN 1936-0851

binary composites

Guo, Qing Bing and Lau, Kin-Tak and Rong, Min Zhi and Zhang, Ming Qiu (2010) Optimization of tribological and mechanical properties of epoxy through hybrid filling. Wear, 269 (1-2). pp. 13-20. ISSN 0043-1648

bio composite

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2010) A review of current development in natural fiber composites for structural and infrastructure applications. In: Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

bio composites

Cheung, Hoi-Yan and Lau, Kin-tak and Tao, Xiao-Ming and Hui, David (2008) A potential material for tissue engineering: silkworm silk/PLA biocomposite. Composites Part B: Engineering, 39 (6). pp. 1026-1033. ISSN 1359-8368

bio-based composite

Misnon, Mohd Iqbal and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Lau, Kin-tak (2014) Potentiality of utilising natural textile materials for engineering composites applications. Materials and Design, 59. pp. 359-368. ISSN 0264-1275

bio-based polymer

Yan, Hongquiang and Sun, Chuang and Fang, Zhengping and Liu, Xiaoqing and Zhu, Jin and Wang, Hao (2016) Synthesis of an intrinsically flame retardant bio-based benzoxazine resin. Polymer, 97. pp. 418-427. ISSN 0032-3861

bio-composites

Manalo, Allan C. and Wani, Evans and Zulkarnain, Noor Azwa and Karunasena, Warna and Lau, Kin-tak (2015) Effects of alkali treatment and elevated temperature on the mechanical properties of bamboo fibre-polyester composites. Composites Part B: Engineering, 80 (1). pp. 73-83. ISSN 1359-8368

Cardona, Francisco (2012) Bio-resins: new structural renewable materials for bio-composite applications. In: 4th KKU International Engineering Conference: Driving Together Towards ASEAN Economic Community (KKU-IENC 2012) , 10-12 May 2012, Khon Kaen University, Thailand.

bio-corrosion

Wang, H. and Estrin, Y. and Fu, H. M. and Song, G. L. and Zuberova, Z. (2007) The effect of pre-processing and grain structure on the bio-corrosion and fatigue resistance of magnesium alloy AZ31. Advanced Engineering Materials, 9 (11). pp. 967-972. ISSN 1438-1656

Ren, Yibin and Huang, Jingjing and Yang, Ke and Zhang, Bingchun and Yao, Zhiming and Wang, Hao (2005) Study of bio-corrosion of pure magnesium. Acta Metallurgica Sinica (Jinshu Xuebao), 41 (11). pp. 1228-1232. ISSN 0412-1961

bio-degradability

Ho, Mei-Po (2012) Strengthening mechanism and bio-degradability of a silk-based polymer composite. [Thesis (PhD/Research)]

bio-engineering

Lau, Kin-Tak and Cheung, Hoi-Yan and Lu, Jian Ping and Yin, Yan-Sheng and Hui, David and Li, Hu-Lin (2008) Carbon nanotubes for space and bio-engineering applications. Journal of Computational and Theoretical Nanoscience, 5 (1). pp. 23-35. ISSN 1546-1955

bio-fidelity

Thota, Narasimha M. and Epaarachchi, Jayantha A. and Lau, Kin Tak (2014) Review of anthropomorphic test dummies for the evaluation of thoracic trauma due to blunt ballistic impacts. In: 8th Australasian Congress on Applied Mechanics, 24-26 Nov 2014, Melbourne, Australia.

bio-materials

Lau, Kin-Tak and Cheung, Hoi-Yan and Lu, Jian Ping and Yin, Yan-Sheng and Hui, David and Li, Hu-Lin (2008) Carbon nanotubes for space and bio-engineering applications. Journal of Computational and Theoretical Nanoscience, 5 (1). pp. 23-35. ISSN 1546-1955

bio-medical

Ho, Mei-po and Wang, Hao and Ho, Chun-kit and Lau, Kin-tak (2012) A study on the dynamic mechanical properties of silk fibre composites. Advanced Materials Research, 410. pp. 106-109. ISSN 1022-6680

Ho, Mei-Po and Lau, Kin-Tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

bio-resins

Cardona, Francisco (2012) Bio-resins: new structural renewable materials for bio-composite applications. In: 4th KKU International Engineering Conference: Driving Together Towards ASEAN Economic Community (KKU-IENC 2012) , 10-12 May 2012, Khon Kaen University, Thailand.

biochemistry

Dohnal, Ludek and Faigl, Paul (2006) Classical or 'robust' linear regression? [Klasická nebo robustní lineární regrese?]. In: 9th Yearly Seminar on Securing Quality of Analytical Results, 27-29 Mar 2006, Komorni Lhotka, Czech Republic.

biocompatibility

Ho, Mei-po and Wang, Hao and Lau, Kin-tak (2012) Effect of degumming time on silkworm silk fibre for biodegradable polymer composites. Applied Surface Science, 258 (8). pp. 3948-3955. ISSN 0169-4332

Chen, Wei and Wang, H. and Zhang, Lei and Tang, Xiushan (2009) Development of hot drawing process for nitinol tube. International Journal of Modern Physics B, 23 (6/7). pp. 1968-1974. ISSN 0217-9792

biocomposite

Francucci, G. and Manthey, N. W. and Cardona, F. and Aravinthan, T. (2014) Processing and characterization of 100% hemp-based biocomposites obtained by vacuum infusion. Journal of Composite Materials, 48 (11). pp. 1323-1335. ISSN 0021-9983

Crossley, Richard and Schubel, Peter and Stevenson, Anthony (2014) Furan matrix and flax fibre as a sustainable renewable composite: mechanical and fire-resistant properties in comparison to phenol, epoxy and polyester. Journal of Reinforced Plastics and Composites, 33 (1). pp. 58-68. ISSN 0731-6844

Manthey, Nathan W. and Cardona, Francisco and Francucci, Gaston and Aravinthan, Thiru (2013) Thermo-mechanical properties of epoxidized hemp oil-based bioresins and biocomposites. Journal of Reinforced Plastics and Composites , 32 (19). pp. 1444-1456. ISSN 0731-6844

Manthey, Nathan W. and Cardona, Francisco and Francucci, Gaston M. and Aravinthan, Thiru (2012) Green building materials: hemp oil based biocomposites. In: 2012 World Academy of Science, Engineering and Technology Conference (WASET 2012), 24-25 Oct 2012, Bali, Indonesia.

Chevali, Venkata S. ORCID: https://orcid.org/0000-0002-5648-0344 and Nerenz, Brent A. and Ulven, Chad A. (2012) Acrylonitrile butadiene styrene (ABS)/lignocellulosic fiber biocomposite: Effect of artificial weathering on impact properties. Journal of Biobased Materials and Bioenergy, 6 (1). pp. 42-50. ISSN 1556-6560

Manthey, N. W. and Cardona, F. and Aravinthan, T. (2011) Mechanical properties of epoxidized hemp oil based biocomposites: preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27 -29 Apr 2011, Brisbane, Australia.

Lau, Kin-tak and Ho, Mei-po and Au-Yeung, Chi-ting and Cheung, Hoi-yan (2010) Biocomposites: their multifunctionality. International Journal of Smart and Nano Materials, 1 (1). pp. 13-27. ISSN 1947-5411

biocomposites

Shah, Darshil U. and Schubel, Peter J. and Clifford, Mike J. (2013) Can flax replace E-glass in structural composites? A small wind turbine blade case study. Composites Part B: Engineering, 52. pp. 172-181. ISSN 1359-8368

Manthey, Nathan William (2013) Development of hemp oil based bioresins for biocomposites. [Thesis (PhD/Research)]

Chevali, Venkata S. ORCID: https://orcid.org/0000-0002-5648-0344 and Ulven, Chad A. (2012) Effect of extrusion screw speed on biocomposite thermo-mechanical properties. International Journal of Sustainable Engineering, 5 (1). pp. 38-46. ISSN 1939-7038

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2011) Experimental investigation into gomuti fibres/polyester composites. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Zhao, Yong-Qing and Cheung, Hoi-Yan and Lau, Kin-Tak and Xu, Cai-Ling and Zhao, Dan-Dan and Li, Hu-Lin (2010) Silkworm silk/poly(lactic acid) biocomposites: dynamic mechanical, thermal and biodegradable properties. Polymer Degradation and Stability, 95 (10). pp. 1978-1987. ISSN 0141-3910

biocorrosion

Wang, Hao and Zhang, M. X. and Shi, Z. M. and Yang, Ke (2006) Biocorrosion behaviour of magnesium alloys under pseudo-physiological conditions. Tissue Engineering, 12 (4). p. 1067. ISSN 1076-3279

biocorrosion behaviour

Wang, H. and Shi, Z. M. and Yang, K. (2008) Magnesium and magnesium alloys as degradable metallic biomaterials. In: International Conference on Frontiers in Materials Science and Technology (FMST 2008), 26-28 Mar 2008, Brisbane, Australia.

biodegradable

Yousif, Belal F. ORCID: https://orcid.org/0000-0003-3847-5469 and Islam, Md Mainul and Salit, Mohd Sapuan (2013) Sustainable composites [Editorial]. Advances in Materials Science and Engineering. ISSN 1687-8434

biodegradable material

Yousif, Belal F. ORCID: https://orcid.org/0000-0003-3847-5469 (2012) Adhesive wear characteristics of natural fiber-reinforced composites. In: Wear of advanced materials. John Wiley & Sons, Inc., London, United Kingdom, pp. 61-97. ISBN 978-1-84821-352-4

biodegradable materials

Nirmal, Umar and Hashim, Jamil and Rilling, Dirk and Brevern, P. V. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2012) Tribo performance of T-BFRP composite subjected to dry/wet contact conditions. In: Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Advances in Materials Science (2). Apple Academic Press (CRC Press), Toronto, Canada, pp. 311-325. ISBN 978-1-9268-9516-1

Wang, H. and Shi, Z. M. and Yang, K. (2008) Magnesium and magnesium alloys as degradable metallic biomaterials. In: International Conference on Frontiers in Materials Science and Technology (FMST 2008), 26-28 Mar 2008, Brisbane, Australia.

biodegradable plastic

Ho, Mei-Po and Lau, Kin-Tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

biodegradable plastics

Ho, Mei-Po and Lau, Kin-Tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

biodegradable properties

Zhao, Yong-Qing and Cheung, Hoi-Yan and Lau, Kin-Tak and Xu, Cai-Ling and Zhao, Dan-Dan and Li, Hu-Lin (2010) Silkworm silk/poly(lactic acid) biocomposites: dynamic mechanical, thermal and biodegradable properties. Polymer Degradation and Stability, 95 (10). pp. 1978-1987. ISSN 0141-3910

biodegradation

Ho, Mei-po and Wang, Hao and Lau, Kin-tak (2012) Effect of degumming time on silkworm silk fibre for biodegradable polymer composites. Applied Surface Science, 258 (8). pp. 3948-3955. ISSN 0169-4332

biofilm

Cheng, Sha and Lau, Kin-Tak and Chen, Shougang and Chang, Xueting and Liu, Tao and Yin, Yansheng (2010) Microscopical observation of the marine bacterium vibrio natriegeus growth on metallic corrosion. Materials and Manufacturing Processes, 25 (5). pp. 293-297. ISSN 1042-6914

biomaterial

Ren, Yibin and Huang, Jingjing and Yang, Ke and Zhang, Bingchun and Yao, Zhiming and Wang, Hao (2005) Study of bio-corrosion of pure magnesium. Acta Metallurgica Sinica (Jinshu Xuebao), 41 (11). pp. 1228-1232. ISSN 0412-1961

biomaterials

Khan, Belas Ahmed and Wang, Jing and Warner, Philip and Wang, Hao (2015) Antibacterial properties of hemp hurd powder against E. coli. Journal of Applied Polymer Science, 132 (10). 41588/1-41588/6. ISSN 0021-8995

Wang, H. and Shi, Z. M. and Yang, K. (2008) Magnesium and magnesium alloys as degradable metallic biomaterials. In: International Conference on Frontiers in Materials Science and Technology (FMST 2008), 26-28 Mar 2008, Brisbane, Australia.

biomechanical surrogate

Thota, Narasimha Murthy and Eepaarachchi, Jayantha A. and Lau, K. T. (2012) Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study. In: 7th Australasian Congress on Applied Mechanics (ACAM 2012), 9-12 Dec 2012, Adelaide, Australia.

biomedical applications

Khan, Belas Ahmed and Wang, Jing and Warner, Philip and Wang, Hao (2015) Antibacterial properties of hemp hurd powder against E. coli. Journal of Applied Polymer Science, 132 (10). 41588/1-41588/6. ISSN 0021-8995

biopolymers

Francucci, Gaston and Cardona, Francisco and Manthey, Nathan W. (2013) Cure kinetics of an acrylated epoxidized hemp oil-based bioresin system. Journal of Applied Polymer Science, 128 (3). pp. 2030-2037. ISSN 0021-8995

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru (2012) Cure kinetic study of epoxidized hemp oil cured with a multiple catalytic system. Journal of Applied Polymer Science, 125 (S2). E511-E517. ISSN 0021-8995

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru and Cooney, Tyson (2011) Cure kinetics of an epoxidized hemp oil based bioresin system. Journal of Applied Polymer Science, 122 (1). pp. 444-451. ISSN 0021-8995

Doherty, William and Halley, Peter J. and Edye, Les and Rogers, David and Cardona, Francisco and Park, Yosup and Woo, Tim (2007) Studies on polymers and composites from lignin and fiber derived from sugar cane. Polymers for Advanced Technologies, 18 (8). pp. 673-678. ISSN 1042-7147

bioresin

Manthey, N. W. and Cardona, F. and Aravinthan, T. (2011) Mechanical properties of epoxidized hemp oil based biocomposites: preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27 -29 Apr 2011, Brisbane, Australia.

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2011) Natural fibre composites with QLD based fibres and vegetable oils. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

bioresins

Manthey, Nathan William (2013) Development of hemp oil based bioresins for biocomposites. [Thesis (PhD/Research)]

bioresorbability

Lau, Kin-tak and Ho, Mei-po and Au-Yeung, Chi-ting and Cheung, Hoi-yan (2010) Biocomposites: their multifunctionality. International Journal of Smart and Nano Materials, 1 (1). pp. 13-27. ISSN 1947-5411

bioresorbable polymers

Lau, Kin-tak and Ho, Mei-po and Au-Yeung, Chi-ting and Cheung, Hoi-yan (2010) Biocomposites: their multifunctionality. International Journal of Smart and Nano Materials, 1 (1). pp. 13-27. ISSN 1947-5411

biosensor

Liu, Yuge and Zhang, Xiumei and He, Dongning and Ma, Feiyue and Fu, Qiong and Hu, Yun (2016) An amperometric glucose biosensor based on a MnO2/graphene composite modified electrode. RSC Advances, 6 (22). 18654-18661 .

bismuth selenide

Zou, Yichao and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Huang, Yang and Zou, Jin and Drennan, John (2014) Au-catalyzed and catalyst-free growth of one-dimensional Bi2Se3 nanostructures. In: 2014 Conference on Optoelectronic and Microelectronic Materials and Devices (COMMAD 2014), 14-17 Dec 2014, Perth, Australia.

blade design

Schubel, P. J. and Crossley, R. J. (2012) Wind turbine blade design. Energies, 5 (9). pp. 3425-3449.

Schubel, P. J. and Crossley, R. J. (2012) Wind turbine blade design review. Wind Engineering, 36 (4). pp. 365-388. ISSN 0309-524X

blade loads

Schubel, P. J. and Crossley, R. J. (2012) Wind turbine blade design. Energies, 5 (9). pp. 3425-3449.

Schubel, P. J. and Crossley, R. J. (2012) Wind turbine blade design review. Wind Engineering, 36 (4). pp. 365-388. ISSN 0309-524X

blast simulation

Wei, Riyu and Zhang, Sheng and Karunasena, Warna and Sivakugan, Nagaratnam and Zhang, Hongwu (2007) Blast simulation in underground mines using the combined finite-discrete element method. In: 7th WSEAS International Conference on Simulation, Modelling and Optimization (SMO '07), 15-17 September 2007, Beijing, China.

bleaching

Wang, Xin and Xu, Weilin and Cui, Weigang and Li, Wenbin and Wang, Xungai (2008) Bleaching and dyeing of superfine wool powder/polypropylene blend film. Research Journal of Textile and Apparel, 12 (4). pp. 12-20. ISSN 1560-6074

blend

Wang, Xin and Xu, Weilin and Cui, Weigang and Li, Wenbin and Wang, Xungai (2008) Bleaching and dyeing of superfine wool powder/polypropylene blend film. Research Journal of Textile and Apparel, 12 (4). pp. 12-20. ISSN 1560-6074

block loading

Epaarachchi, Jayantha A. (2006) A study of estimation of damage accumulation of glass fibre reinforce plastic (GFRP) composites under a block loading situation. Composite Structures, 75 (1-4). pp. 88-92. ISSN 0263-8223

blunt ballistic impacts

Thota, Narasimha and Epaarachchi, Jayantha and Lau, Kin Tak (2014) Viscous criterion and its relation with the projectile-thorax energy interactions. In: 8th Australasian Congress on Applied Mechanics, 24-26 Nov 2014, Melbourne, Australia.

blunt chest trauma

Thota, Narasimha M. and Epaarachchi, Jayantha A. and Lau, Kin Tak (2014) Effect of energy absorbing mechanisms on the blunt thoracic trauma caused by ballistic impacts. In: 8th Australasian Congress on Applied Mechanics, 24-26 Nov 2014, Melbourne, Australia.

blunt criterion

Thota, Narasimha M. and Epaarachchi, Jayantha A. and Lau, Kin Tak (2014) Evaluation of the blunt thoracic trauma due to baseball impacts – review of the Blunt Criterion. In: 8th Australasian Congress on Applied Mechanics, 24-26 Nov 2014, Melbourne, Australia.

blunt thoracic trauma

Thota, Narasimha M. and Epaarachchi, Jayantha A. and Lau, Kin Tak (2014) Review of anthropomorphic test dummies for the evaluation of thoracic trauma due to blunt ballistic impacts. In: 8th Australasian Congress on Applied Mechanics, 24-26 Nov 2014, Melbourne, Australia.

Thota, Narasimha and Epaarachchi, Jayantha and Lau, Kin-Tak (2014) Development and validation of a thorax surrogate FE model for assessment of trauma due to high speed blunt impacts. Journal of Biomechanical Science and Engineering, 9 (1). 08-1. ISSN 1880-9863

Thota, Narasimha M. and Epaarachchi, Jayantha A. and Lau, Kin-tak (2013) Effect of the energy absorbing mechanisms on the blunt thoracic trauma caused by a typical foam projectile. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

blunt trauma

Thota, Narasimha Murthy and Eepaarachchi, Jayantha A. and Lau, K. T. (2012) Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study. In: 7th Australasian Congress on Applied Mechanics (ACAM 2012), 9-12 Dec 2012, Adelaide, Australia.

BMG composites

Fu, H. M. and Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2006) In situ TiB-reinforced cu-based bulk metallic glass composites. Scripta Materialia, 54 (11). pp. 1961-1966. ISSN 1359-6462

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2006) In-situ Cu-based bulk metallic glass composite. International Journal of Modern Physics B, 20 (25-27). pp. 3963-3968. ISSN 0217-9792

BMG matrix composites

Wang, Hao (2010) The role of casting temperature in preparation of bulk metallic glasses. In: 6th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC 2009): Processing, Fabrication, Properties, Applications, 25-29 Aug 2009, Berlin, Germany.

Fu, H. M. and Zhang, H. F. and Wang, Hao and Zhang, Qingsheng and Hu, Z. Q. (2005) Synthesis and mechanical properties of Cu-based bulk metallic glass composites containing in-situ TiC particles. Scripta Materialia, 52 (7). pp. 669-673. ISSN 1359-6462

bolted joint

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2013) Effect of eccentricity on the behavior of pultruded FRP bolted joint. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

bolted joints

Manalo, Allan and Mutsuyoshi, Hiroshi (2012) Behavior of fiber-reinforced composite beams with mechanical joints. Journal of Composite Materials, 46 (4). pp. 483-496. ISSN 0021-9983

Manalo, A. C. and Mutsuyoshi, H. and Asamoto, S. and Aravinthan, T. and Matsui, T. (2008) Mechanical behavior of hybrid FRP composites with bolted joints. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Bombyx mori

Ho, Mei-Po (2012) Strengthening mechanism and bio-degradability of a silk-based polymer composite. [Thesis (PhD/Research)]

Bond behaviour

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Aravinthan, Thiru (2016) Bond behaviour of composite sandwich panel and epoxy polymer matrix. In: 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2016), 14 - 16 Dec 2016, Hong Kong, CHina.

bond length

Zhang, Zuhua and Yao, Xiao and Zhu, Huajun and Hua, Sudong and Chen, Yue (2009) Activating process of geopolymer source material: kaolinite. Journal Wuhan University of Technology, Materials Science Edition, 24 (1). pp. 132-136. ISSN 1000-2413

bond mechanism

Maranan, Ginghis B. and Manalo, Allan C. and Karunasena, Karu and Benmokrane, Brahim (2014) Bond-slip behaviour of GFRP bars into geopolymer concrete. In: 7th International Conference on FRP Composites in Civil Engineering (CICE 2014), 20-22 Aug 2014, Vancouver, Canada.

bond strength

Zhang, Z. and Wang, H. (2015) Alkali-activated cements for protective coating of OPC concrete. In: Handbook of alkali-activated cements, mortars and concretes. Woodhead Publishing Series in Civil and Structural Engineering, 54. Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 605-626. ISBN 978-1-78242-276-1

Zhu, Huajun and Zhang, Zuhua and Deng, Fenggan and Cao, Yalong (2013) The effects of phase changes on the bonding property of geopolymer to hydrated cement. Construction and Building Materials, 48. pp. 124-130. ISSN 0950-0618

bond-slip

Maranan, Ginghis B. and Manalo, Allan C. and Karunasena, Karu and Benmokrane, Brahim (2014) Bond-slip behaviour of GFRP bars into geopolymer concrete. In: 7th International Conference on FRP Composites in Civil Engineering (CICE 2014), 20-22 Aug 2014, Vancouver, Canada.

bonded AFRP sheets

Shinozaki, H. and Pandey, G. R. and Mutsuyoshi, H. and Aravinthan, T. (2008) AFRP retrofitting of RC structures in Japan. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

bonded joints

Manalo, Allan and Mutsuyoshi, Hiroshi (2012) Behavior of fiber-reinforced composite beams with mechanical joints. Journal of Composite Materials, 46 (4). pp. 483-496. ISSN 0021-9983

bonding

Maranan, Ginghis and Manalo, Allan and Karunasena, Karu and Benmokrane, Brahim (2015) Bond stress-slip behavior: case of GFRP bars in geopolymer concrete. Journal of Materials in Civil Engineering, 27 (1). pp. 4014116-1. ISSN 0899-1561

Yan, Zili and Zhang, Jianchun and Zhang, Hua and Wang, Hao (2013) Improvement of mechanical properties of noil hemp fiber reinforced polypropylene composites by resin modification and fiber treatment. Advances in Materials Science and Engineering, 2013. pp. 1-7. ISSN 1687-8434

bonding materials

Zhu, Huajun and Zhang, Zuhua and Deng, Fenggan and Cao, Yalong (2013) The effects of phase changes on the bonding property of geopolymer to hydrated cement. Construction and Building Materials, 48. pp. 124-130. ISSN 0950-0618

bone

Lau, Mei-Ling and Lau, Kin-Tak and Ku, Harry and Bahattacharyya, Debes and Yao, Yan-Dong (2012) Measurements of heat treatment effects on bovine cortical bones by nanoindentation and compression testing. Journal of Biomaterials and Nanobiotechnology, 3 (1). pp. 105-113. ISSN 2158-7027

bone implant

Ho, Mei-po and Wang, Hao and Ho, Chun-kit and Lau, Kin-tak (2012) A study on the dynamic mechanical properties of silk fibre composites. Advanced Materials Research, 410. pp. 106-109. ISSN 1022-6680

bone properties

Lau, Mei-ling and Lau, Kin-tak and Yao Yeo, Yan-Dong and Au Yeung, Chi-ting and Lee, Joong-hee (2010) Measurement of bovine bone properties through surface indentation technique. Materials and Manufacturing Processes, 25 (5). pp. 324-328. ISSN 1042-6914

bone repair

Lau, Kin-tak and Ho, Mei-po and Au-Yeung, Chi-ting and Cheung, Hoi-yan (2010) Biocomposites: their multifunctionality. International Journal of Smart and Nano Materials, 1 (1). pp. 13-27. ISSN 1947-5411

bone tissue engineering

Chen, Ling and Tang, Chak Yin and Ku, Harry Siu Lung and Chen, Da Zhu and Tsui, Chi Pong (2013) Surface coating of poly-D-L-lactide/nano-hydroxyapatite composite scaffolds for dexamethasone-releasing function and wettability enhancement. In: Materials Science and Technology Conference (MS&T 2012): Next Generation Biomaterials and Surface Properties of Biomaterials , 27-31 Oct 2012, Pittsburgh, PA. United States.

boundary conditions

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2010) Investigation of frequency characteristics of GFRP/phenolic sandwich beams. In: Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

bovine cortical bone

Lau, Mei-ling and Lau, Kin-tak and Ku, Harry and Cardona, Francisco and Lee, Joong-Hee (2013) Analysis of heat-treated bovine cortical bone by thermal gravimetric and nanoindentation. Composites Part B: Engineering , 55. pp. 447-452. ISSN 1359-8368

Lau, Mei-ling and Lau, Kin-tak and Ku, Harry and Bahattacharyya, Debes and Lee, Joong-Hee (2012) Assessing heat-treatment effects on bovine cortical bones by nanoindentation. Processing and Fabrication of Advanced Materials. pp. 110-113. ISSN 1022-6680

box beam

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2012) A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials and Design, 33 (1). pp. 534-544. ISSN 0264-1275

Bragg wavelength

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

bridge

Kalendher, F. and Setunge, S. and Mohseni, H. and Lokuge, W. (2015) Deriving damage indices for concrete girder bridges subjected to flood loading. In: 6th International Conference on Structural Engineering and Construction Management (CSECM) 2015, 11-14 Dec 2015, Kandy, Sri Lanka.

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2011) Temperature effects on full scale FRP bridge using innovative composite components. In: 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), 27-29 Sep 2010, Beijing, China.

Aravinthan, Thiru (2006) Is external post-tensioning an effective solution for shear strengthening of bridge elements? In: Structural Faults + Repair 2006: Eleventh International Conference on ‘Extending the Life of Bridges Concrete + Composites Buildings, Masonry + Civil Structures', 13-15 June 2006, Edinburgh, UK.

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2005) Overview of external post-tensioning in bridges. In: 2005 Southern Region Engineering Conference: Managing Resources for a Sustainable Future (SREC 2005), 15 Oct 2005, Toowoomba, Australia.

bridge design

Lokuge, Weena and Setunge, Sujeeva (2013) Evaluating disaster resilience of bridge infrastructure when exposed to extreme natural events. In: 3rd International Conference on Building Resilience: Individual, Institutional and Societal Coping Strategies to Address the Challenges Associated with Disaster Risk, 17-19 Sep 2013, Heritance Ahungalla, Sri Lanka .

bridge girder

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2012) A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials and Design, 33 (1). pp. 534-544. ISSN 0264-1275

bridge girders

Epaarachchi, J. A. and Karunasena, W. and Aravinthan, T. (2008) Dynamic behavior of hybrid composite bridge girder. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

bridge infrastructure

Lebbe, Mohamed Farook Kalendher and Lokuge, Weena and Setunge, Sujeeva and Zhang, Kevin (2014) Failure mechanisms of bridge infrastructure in an extreme flood event. In: 1st International Conference on Infrastructure Failures and Consequences (ICFC 2014), 16-20 Jul 2014, Melbourne, Australia.

bridge repair

Shinozaki, H. and Pandey, G. R. and Mutsuyoshi, H. and Aravinthan, T. (2008) AFRP retrofitting of RC structures in Japan. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

bridges

Setunge, Sujeeva and Lokuge, Weena and Mohseni, Hessam and Karunasena, Warna (2014) Vulnerability of road bridge infrastructure under extreme flood events. In: AFAC and Bushfire and Natural Hazards CRC Conference 2014, 2-5 Sept 2014, Wellington, New Zealand.

Manalo, A. and Maranan, G. and Erp, G. V. (2013) Glue-laminated composite sandwich beams for structural engineering and construction. In: 13th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC13), 11-13 Sep 2013, Sapporro, Japan.

Lokuge, Weena and Setunge, Sujeeva (2013) Evaluating disaster resilience of bridge infrastructure when exposed to extreme natural events. In: 3rd International Conference on Building Resilience: Individual, Institutional and Societal Coping Strategies to Address the Challenges Associated with Disaster Risk, 17-19 Sep 2013, Heritance Ahungalla, Sri Lanka .

Aravinthan, Thiru and Manalo, Allan (2012) Field applications and case studies of FRP in civil infrastructure: the Australian experience. In: 6th International Conference on FRP Composites in Civil Engineering (CICE 2012) , 13-15 Jun 2012, Rome, Italy.

Aravinthan, Thiru (2012) Research and development of fibre composites in civil infrastructure - the Australian experience [Keynote address]. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Aravinthan, T. and Heldt, T. (2010) Innovative strengthening technique using post-tensioned fibre composite wraps for bridge headstocks. Australian Journal of Structural Engineering, 11 (2). pp. 117-128. ISSN 1328-7982

Shinozaki, H. and Pandey, G. R. and Mutsuyoshi, H. and Aravinthan, T. (2008) AFRP retrofitting of RC structures in Japan. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Suntharavadivel, T. G. and Aravinthan, T. (2008) Strengthening of shear damaged RC beams with external clamping. In: 4th International Conference on Structural and Construction Engineering (ISEC 4): Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2006) Effect of existing cracks in concrete bridge members strengthened by external post-tensioning. In: FIB 2006: 2nd Congress (Federation Internationale du Beton), 5-8 Jun 2006, Naples, Italy.

Aravinthan, Thiru (2006) Is external post-tensioning an effective solution for shear strengthening of bridge elements? In: Structural Faults + Repair 2006: Eleventh International Conference on ‘Extending the Life of Bridges Concrete + Composites Buildings, Masonry + Civil Structures', 13-15 June 2006, Edinburgh, UK.

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2005) Overview of external post-tensioning in bridges. In: 2005 Southern Region Engineering Conference: Managing Resources for a Sustainable Future (SREC 2005), 15 Oct 2005, Toowoomba, Australia.

Van Erp, Gerard and Cattell, Craig and Heldt, Tim (2005) Fibre composite structures in Australia's civil engineering market: an anatomy of innovation. Structural Control and Health Monitoring, 7 (3). pp. 150-160. ISSN 1365-0556

brittleness

Lokuge, Weena P. and Sanjayan, J. G. and Setunge, Sujeeva (2005) Stress-strain model for laterally confined concrete. Journal of Materials in Civil Engineering, 17 (6). pp. 607-616. ISSN 0899-1561

broadband light sources

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

buckling

Matveev, M. Y. and Schubel, P. J. and Long, A. C. and Jones, I. A. (2016) Understanding the buckling behaviour of steered tows in automated dry fibre placement (ADFP). Composites Part A: Applied Science and Manufacturing, 90. pp. 451-456. ISSN 1359-835X

buckling theory

Goh, S. and Ku, H. and Ang, S. L. (2008) Prediction of crushing stress in composite materials. Journal of Composite Materials, 42 (5). pp. 467-484. ISSN 0021-9983

building

Thorpe, David and Ryan, Neal and Charles, Michael (2008) Environmental sustainability - a driver for innovation in construction SMEs? In: 3rd International Conference of the CRC for Construction Innovation: Clients Driving Innovation: Benefiting from Innovation, 12-14 March 2008, Gold Coast, Australia.

building construction

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2013) Significance analysis of flexural behaviour of hybrid sandwich panels. Open Journal of Civil Engineering, 3 (3B). pp. 1-7. ISSN 2164-3164

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2013) Hybrid sandwich panel with natural fibre composite intermediate layer: manufacturing process and significance analysis. Malaysian Journal of Civil Engineering, 25 (Special issue 1). pp. 95-111. ISSN 1823-7843

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2012) New concept for optimal application of natural fibre reinforced plastic (NFRP) in building construction. In: 8th Asia Pacific Structural Engineering and Construction Conference and 1st International Conference on Civil Engineering Research (APSEC-ICCER 2012): Sustaining the World with Better Structures and Construction Practice, 2-4 Oct 2012, Surabaya, Indonesia.

building materials

Nirmal, Umar and Hashim, Jamil and Rilling, Dirk and Brevern, P. V. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2012) Tribo performance of T-BFRP composite subjected to dry/wet contact conditions. In: Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Advances in Materials Science (2). Apple Academic Press (CRC Press), Toronto, Canada, pp. 311-325. ISBN 978-1-9268-9516-1

Wang, Bo and Teng, J. G. and De Lorenzis, Laura and Zhou, Li-Min and Ou, Jinping and Jin, Wei and Lau, K. T. (2009) Strain monitoring of RC members strengthened with smart NSM FRP bars. Construction and Building Materials, 23 (4). pp. 1698-1711. ISSN 0950-0618

Kim, Ho Sung and Islam, Md Mainul (2009) Syntactic foams as building materials consisting of inorganic hollow microspheres and starch binder. In: Building materials: properties, performance and applications. Nova Science Publishers, Inc., New York, USA. ISBN 978-1-60741-082-9

bulk amorphous alloy

Liu, W. Y. and Zhang, H. F. and Hu, Z. Q. and Wang, H. and Yao, X. D. (2005) Fabrication of bulk amorphous Mg65Cu25Gd10 alloy of 12mm rod by water quenching. In: Magnesium – Science, Technology and Applications. Trans Tech Publications Inc., Zurich, Switzerland, pp. 211-214. ISBN 978-087849968-7

bulk amorphous alloys

Liu, Weili and Zhang, H. F. and Hu, Z. Q. and Wang, Hao (2005) Formation and mechanical properties of Mg65Cu25Er10 and Mg65Cu15Ag10Er10 bulk amorphous alloys. Journal of Alloys and Compounds, 397 (1-2). pp. 202-206. ISSN 0925-8388

bulk metallic glass

Wang, Hao (2010) The role of casting temperature in preparation of bulk metallic glasses. In: 6th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC 2009): Processing, Fabrication, Properties, Applications, 25-29 Aug 2009, Berlin, Germany.

Fu, H. M. and Zhang, H. F. and Wang, H. and Hu, Z. Q. (2008) Cu-based bulk amorphous alloy with larger glass-forming ability and supercooled liquid region. Journal of Alloys and Compounds, 458 (1-2). pp. 390-393. ISSN 0925-8388

Fu, H. M. and Zhang, H. F. and Wang, Hao and Hu, Z. Q. (2007) Multifarious fracture features of CuZrAlGd(Ag) bulk metallic glasses. Advanced Materials Research, 29-30. pp. 47-50. ISSN 1022-6680

bulk metallic glass matrix composite

Zhu, Zhengwang and Zhang, Haifeng and Wang, Hao and Ding, Bingzhe and Hu, Zhuang-Qi and Huang, Han (2009) Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting [+ Erratum]. Journal of Materials Research, 24 (10). pp. 3108-3115. ISSN 0884-2914

bulk metallic glasses

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2007) A practical thermodynamic method to calculate the best glass-forming composition for bulk metallic glasses. International Journal of Nonlinear Sciences and Numerical Simulation, 8 (2). pp. 171-178. ISSN 1565-1339

Wang, Hao and Fu, Huameng (2007) Development of bulk metallic glass composites. In: The world of bulk metallic glasses and their composites. Research Signpost, Kerala, India, pp. 73-92. ISBN 978-81-308-0196-4

Fu, H. M. and Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2006) In situ TiB-reinforced cu-based bulk metallic glass composites. Scripta Materialia, 54 (11). pp. 1961-1966. ISSN 1359-6462

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2006) In-situ Cu-based bulk metallic glass composite. International Journal of Modern Physics B, 20 (25-27). pp. 3963-3968. ISSN 0217-9792

Wang, Hao (2005) Bulk metallic glass composites. Journal of Materials Science and Technology, 21 (s1). pp. 86-90. ISSN 1005-0302

Wang, Hao and Song, Xiaoping and Yao, Xiangdong and Zhang, Haifeng and Hu, Zhuangqui (2005) Crystallization behavior of (Cu60Zr30Ti10)99Sn1 bulk metallic glass. Journal of Materials Science & Technology, 21 (s 1). pp. 51-53. ISSN 1005-0302

Fu, H. M. and Zhang, H. F. and Wang, Hao and Zhang, Qingsheng and Hu, Z. Q. (2005) Synthesis and mechanical properties of Cu-based bulk metallic glass composites containing in-situ TiC particles. Scripta Materialia, 52 (7). pp. 669-673. ISSN 1359-6462

bulk volume

Islam, M. M. and Kim, H. S. (2009) An overview on manufacturing and properties of syntactic foams made of ceramic hollow microspheres and starch. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Islam, Md Mainul and Kim, Ho Sung (2008) Manufacture of syntactic foams using starch as binder: post-mold processing. Materials and Manufacturing Processes, 23 (8). pp. 884-892. ISSN 1042-6914

bulk volume expansion

Islam, Md Mainul and Kim, Ho Sung (2008) Manufacture of syntactic foams using starch as binder: post-mold processing. Materials and Manufacturing Processes, 23 (8). pp. 884-892. ISSN 1042-6914

bullbar

Thota, N. M. and Epaarachchi, J. A. and Lau, K. T. (2013) Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

buoyancy

Islam, Md Mainul and Kim, Ho Sung (2011) Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment. Journal of Materials Processing Technology, 211 (4). pp. 708-716. ISSN 0924-0136

Islam, Md Mainul and Kim, Ho Sung (2008) Manufacture of syntactic foams using starch as binder: post-mold processing. Materials and Manufacturing Processes, 23 (8). pp. 884-892. ISSN 1042-6914

Islam, Md Mainul and Kim, Ho Sung (2007) Manufacture of syntactic foams: pre-mold processing. Materials and Manufacturing Processes, 22 (1). pp. 28-36. ISSN 1042-6914

burning test

Misnon, Mohd Iqbal and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Chen, Haizhen and Wang, Hao (2016) Woven hemp fabric reinforced vinyl ester composite treated with fire retardant. International Journal of Advances in Science Engineering and Technology, 4 (3). pp. 90-95. ISSN 2321-8991

cables

Wickramasinghe, Wasanthi R. and Thambiratnam, David P. and Chan, Tommy H. T. and Nguyen, Theanh (2016) Vibration characteristics and damage detection in a suspension bridge. Journal of Sound and Vibration, 375. pp. 254-274. ISSN 0022-460X

CAFVM

Yao, Xiangdong and Wang, Hao and He, B. and Zhou, X. (2005) Modeling of columnar-to-equiaxed transition in solidified Al-Si alloys. In: 5th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 5), 2-5 Nov 2004, Beijing, China.

calcined kaolin

Zhang, Zuhua and Yao, Xiao and Zhu, Huajun and Hua, Sudong and Chen, Yue (2009) Preparation and mechanical properties of polypropylene fiber reinforced calcined kaolin-fly ash based geopolymer. Journal of Central South University of Technology, 16 (1). pp. 49-52. ISSN 1005-9784

calcined temperature

Zhu, Huajun and Yao, Xiao and Zhang, Zuhua and Hua, Sudong and Chen, Yue (2008) Study on the activation of calcined kaolin. Cailiao Kexue yu Gongyi (Material Science and Technology), 16 (S1). pp. 126-129. ISSN 1005-0299

calcium

Yang, T. and Yao, X. and Zhang, Z. and Wang, H. (2012) Effects of ground granulated blast furnace slag on the mechanical and microstructure of fly ash-based geopolymer binders. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

calibration

Dohnal, Ludek and Faigl, Paul (2007) Evaluation of the linearity of calibration dependence. In: Quality assurance of analytical results, 26-28 Mar 2007, (Beskydy), Czech Republic.

calorimetry

Zhang, Zuhua and Wang, Hao and Zhu, Yingcan and Reid, Andrew and Provis, John L. and Bullen, Frank (2014) Using fly ash to partially substitute metakaolin in geopolymer synthesis. Applied Clay Science, 88-89. pp. 194-201. ISSN 0169-1317

Yao, Xiao and Zhang, Zuhua and Zhu, Huajun and Chen, Yue (2009) Geopolymerization process of alkali-metakaolinite characterized by isothermal calorimetry. Thermochimica Acta, 493 (1/2). pp. 49-54. ISSN 0040-6031

cannabinoids

Khan, Belas Ahmed and Warner, Philip and Wang, Hao (2014) Antibacterial properties of hemp and other natural fibre plants: a review. BioResources, 9 (2). pp. 3642-3659.

capacity

Xiang, Wei and Pietrobon, Steven S. (2003) On the capacity and normalisation of ISI channels. IEEE Transactions on Information Theory, 49 (9). pp. 2263-2268. ISSN 0018-9448

carbide tools

Ku, Harry S. and Chia, Wee Chong (2006) Design of multi-purpose carbide end mill. Institution of Engineers, Malaysia. Journal, 67 (2). pp. 34-40. ISSN 0126-513X

carbon

Lau, Alan kin-tak (2011) Carbon nanotube-reinforced nanocomposites. In: Multifunctional polymer nanocomposites. Taylor & Francis (CRC Press), Boca Raton, FL. United States, pp. 19-45. ISBN 978-1-4398-1682-0

carbon fiber reinforced platics

Asamoto, S. and Mutsuyoshi, H. and Aravinthan, T. and Suzukawa, K. (2008) Experimental investigation of innovative hybrid composite girders with GFRP and CFRP. In: 4th International Structural Engineering and Construction Conference (ISEC 4): Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

carbon fibre

Falzon, P. J. and Leong, K. H. and McGarva, L. and Leong, Y. L. and Manalo, A. and Virk, A. and Leipnik, D. and Djukic, L. (2012) Development and assessment of a carbon fibre reinforced composite repair system. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Kim, M. T. and Rhee, K. Y. and Lee, J. H. and Hui, D. and Lau, Alan K. T. (2011) Property enhancement of a carbon fiber/epoxy composite by using carbon nanotubes. Composites Part B: Engineering , 42 (5). pp. 1257-1261. ISSN 1359-8368

Manalo, Allan and Mutsuyoshi, Hiroshi and Aravinthan, Thiru and Matsui, Takahiro (2009) Behaviour of hybrid FRP composite I-girder with concrete deck. In: 9th International Symposium of the Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures (FRPRCS-9): Current Challenges and Future Trends, 13-15 Jul 2009, Sydney, Australia.

carbon fibre and Araldite

Ku, Harry S. (2006) Productivity improvement of composites processing through the use of industrial microwave technologies. Progress in Electromagnetics Research (PIER), PIER 6. pp. 267-285. ISSN 1559-8985

carbon fibre and glass fibre

Ku, Harry S. and MacRobert, Martin and Siores, Elias and Ball, James A. R. (2000) Characterisation of thermoplastic matrix composites (TPC) using variable frequency micorwave (VFM). Plastics, Rubber and Composites, 29 (6). pp. 285-287. ISSN 1465-8011

Ku, Harry S. and MacRobert, Martin and Siores, Elias and Ball, James A. R. (2000) Variable frequency microwave processing of thermoplastic composites. Plastics, Rubber and Composites, 29 (6). pp. 278-284. ISSN 1465-8011

carbon fibre reinforced plastics

Shah, Darshil U. and Schubel, Peter J. (2016) On recycled carbon fibre composites manufactured through a liquid composite moulding process. Journal of Reinforced Plastics and Composites, 35 (7). pp. 533-540. ISSN 0731-6844

carbon fibre reinforced polymer

Tawfik, Qaidar H. and Karunasena, Warna (Karu) and Cardona, Francisco (2012) Strengthening of corroded steel angles using CFRP. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

Tawfik, Qaidar H. (2012) Rehabilitation of deteriorated steel truss members using CFRP. [Thesis (PhD/Research)]

carbon fibre reinforced polymer (CFRP)

Tawfik, Qaidar and Karunasena, Warna (Karu) (2010) Use of CFRP for rehabilitation of steel structures: a review. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

carbon nanofibers

Chipara, Mircea and Brittain, Wiliam J. and Lau, Kin-Tak and Chipara, Magdalena Dorina (2008) Polycarbonate-carbon nanofibers composites: an electron spin resonance study. Polymers and Polymer Composites , 16 (8). pp. 519-526. ISSN 0967-3911

carbon nanotube

Zhu, Yue-Feng and Shi, Lei and Liang, Ji and Hui, David and Lau, Kin-Tak (2008) Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics. Composites Part B: Engineering, 39 (7-8). pp. 1136-1141. ISSN 1359-8368

carbon nanotubes

Tarawneh, Mou’ad A. and Ahmad, Sahrim Hj. and EhNoum, SeYong and Lau, Kin-tak (2013) Sonication effect on the mechanical properties of MWCNTs reinforced natural rubber. Journal of Composite Materials, 47 (5). pp. 579-585. ISSN 0021-9983

Li, Xiao-Feng and An, Yan and Lau, Kin-Tak and Li, Wen-Ge and Yin, Yan-Sheng (2012) Europium complex with functionalized carbon nanotubes: a new lanthanide photoluminescence nanomaterial. In: 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM 20), 15-18 Dec 2011, Hong Kong.

Naebe, Minoo and Wang, Jing and Xue, Yuhua and Wang, Xungai and Lin, Tong (2010) Carbon nanotube reinforced rigid-rod polyimide. Journal of Applied Polymer Science, 118 (1). pp. 359-365. ISSN 0021-8995

Lau, Kin-Tak and Cheung, Hoi-Yan and Lu, Jian Ping and Yin, Yan-Sheng and Hui, David and Li, Hu-Lin (2008) Carbon nanotubes for space and bio-engineering applications. Journal of Computational and Theoretical Nanoscience, 5 (1). pp. 23-35. ISSN 1546-1955

carbon nanotubes (CNT)

Yao, X. D. and Wu, C. Z. and Wang, Hao and Cheng, H. M. and Lu, G. Q. (2006) Effects of carbon nanotubes and metal catalysts on hydrogen storage in magnesium nanocomposite. Journal of Nanoscience and Nanotechnology, 6 (2). pp. 494-498. ISSN 1533-4880

carbon template

Yan, Z. L. and Ma, T. and Zhang, J. C. and Zhang, H. and Wang, H. (2013) Hemp hurd based carbon template for reaction formed silicon carbide ceramic. In: 19th International Conference on Composite Materials (ICCM19): Composite Materials: The Great Advance, 28 Jul-2 Aug 2013, Montreal, Canada.

carbon-fibre

Choy, Yat-Sze and Lau, Kin-Tak and Wang, C. and Chau, C. W. and Liu, Yang and Hui, D. (2009) Composite panels for reducing noise in air conditioning and ventilation systems. Composites Part B: Engineering, 40 (4). pp. 259-266. ISSN 1359-8368

carbonation

Zhang, Zuhua and Provis, John L. and Reid, Andrew and Wang, Hao (2014) Fly ash-based geopolymers: the relationship between composition, pore structure and efflorescence. Cement and Concrete Research, 64. pp. 30-41. ISSN 0008-8846

Zhang, Zuhua and Wang, Hao and Provis, John L. and Reid, Andrew (2013) Efflorescence: a critical challenge for geopolymer applications? In: Concrete Institute of Australia's Biennial National Conference (Concrete 2013): Understanding Concrete, 16-18 Oct 2013, Gold Coast, Australia.

carbothermal method

He, Dong-Ning and Hodgson, Peter and Gao, Wei-Min (2015) Epitaxial growth of multi-structure SnO2 by chemical vapor deposition. Acta Metallurgica Sinica (English Letters), 28 (7). pp. 946-950. ISSN 1006-7191

cardanol

Cardona, F. and Fedrigo, J. (2011) Synthesis of elastomeric phenolic resins with improved toughness and flexibility. In: EUROTEC 2011: Inaugural European Technical Conference on Plastics, 14-15 Nov 2011, Barcelona, Spain.

Cardona, Francisco and Aravinthan, Thiru and Fedrigo, Jessica and Moscou, Clarisse (2010) Synthesis of phenolic bio-resins for advanced composites in civil engineering structures. In: Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Cardona, F. and Aravinthan, T. and Moscou, C. (2010) Modified PF resins for composite structures with improved mechanical properties. Polymers and Polymer Composites, 18 (6). pp. 297-306. ISSN 0967-3911

Cardona, F. and Moscou, C. (2009) Synthesis and characterization of modified phenolic resins for composites with enhanced mechanical properties. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

cashew nut shell liquid

Cardona, F. and Moscou, C. (2009) Synthesis and characterization of modified phenolic resins for composites with enhanced mechanical properties. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

cast composites

Ku, H. and Prajapati, M. and Trada, M. (2012) Fracture toughness of vinyl ester composites reinforced with sawdust and postcured in microwaves. International Journal of Microwave Science and Technology, 2012 (Articl). ISSN 1687-5826

casting

Ku, H. and Maxwell, A. and Wong, P. and Huang, J. and Fung, H. (2011) Relationship between electrical and mechanical loss tangents of hollow glass powder reinforced epoxy composites: a pilot study. Journal of Applied Polymer Science , 119 (5). pp. 2945-2952. ISSN 0021-8995

Wang, Hao (2010) The role of casting temperature in preparation of bulk metallic glasses. In: 6th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC 2009): Processing, Fabrication, Properties, Applications, 25-29 Aug 2009, Berlin, Germany.

casting temperature

Wang, Hao (2010) The role of casting temperature in preparation of bulk metallic glasses. In: 6th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC 2009): Processing, Fabrication, Properties, Applications, 25-29 Aug 2009, Berlin, Germany.

casting temperatures

Zhu, Zhengwang and Zhang, Haifeng and Wang, Hao and Ding, Bingzhe and Hu, Zhuang-Qi and Huang, Han (2009) Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting [+ Erratum]. Journal of Materials Research, 24 (10). pp. 3108-3115. ISSN 0884-2914

Catalyst-assisted chemical–mechanical polishing

Xu, Li and Zou, Chunli and Shi, Xiaolei ORCID: https://orcid.org/0000-0003-0905-2547 and Pan, Guoshun and Luo, Guihai and Zhou, Yan (2015) Fe-Nx/C assisted chemical–mechanical polishing for improving the removal rate of sapphire. Applied Surface Science, 343. pp. 115-120. ISSN 0169-4332

catalysts

Munoz, J.-C. and Ku, H. and Cardona, F. and Rogers, D. (2008) Effects of catalysts and post-curing conditions in the polymer network of epoxy and phenolic resins: preliminary results. Journal of Materials Processing Technology, 202 (1-3). pp. 486-492. ISSN 0924-0136

catalytic degumming system

Hurren, Christopher and Wang, Jing and Wood, Raymon and Li, Qing and Bibeau, Louis and Wang, Xungai (2013) Evaluation of cottonised hemp fibre produced using a new catalytic degumming system. In: 1st International Conference on Natural Fibers (ICNF 2013): Sustainable Materials for Advanced Applications, 9-11 Jun 2013, Guimaraes, Portugal .

catalytic effects

Yao, X. and Wu, C. Z. and Wang, H. and Cheng, H. M. and Lu, G. Q. Max (2005) Hydrogen storage of magnesium-based nanocomposites system. Journal of Materials Science & Technology, 21 (s 1). pp. 57-60. ISSN 1005-0302

causes of failure

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Aravinthan, Thiru and Remennikov, Alex (2014) Review of failures of railway sleepers and its consequences. In: 1st International Conference on Infrastructure Failures and Consequences (ICFC 2014), 16-20 Jul 2014, Melbourne, Australia.

CEC

Zhang, Zuhua and Li, Liangfeng and He, Dongning and Ma, Xue and Yan, Chunjie and Wang, Hao (2016) Novel self-supporting zeolitic block with tunable porosity and crystallinity for water treatment. Materials Letters, 178. pp. 151-154. ISSN 0167-577X

cell performance

Bose, Saswata and Kuila, Tapas and Nguyen, Thi Xuan Hien and Kim, Nam Hoon and Lau, Kin-tak and Lee, Joong Hee (2011) Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenge. Progress in Polymer Science, 36 (6). pp. 813-843. ISSN 0079-6700

cell structure

Lau, Kin-tak and Ho, Mei-po and Au-Yeung, Chi-ting and Cheung, Hoi-yan (2010) Biocomposites: their multifunctionality. International Journal of Smart and Nano Materials, 1 (1). pp. 13-27. ISSN 1947-5411

cellular

Banerjee, Sourish ORCID: https://orcid.org/0000-0001-5446-5290 (2014) On the mechanical properties of hierarchical lattices. Mechanics of Materials, 72. pp. 19-32. ISSN 0167-6636

cellular automaton (CA)

Yao, X. and Wang, H. and He, B. and Zhou, X. (2006) Numerical simulation of dendrite growth during solidification. International Journal of Nonlinear Sciences and Numerical Simulation, 7 (2). pp. 171-176. ISSN 1565-1339

cement

Zhuang, Xiao Yu and Chen, Liang and Komarneni, Sridhar and Zhou, Chun Hui and Tong, Dong Shen and Yang, Hui Min and Yu, Wei Hua and Wang, Hao (2016) Fly ash-based geopolymer: clean production, properties and applications. Journal of Cleaner Production, 125. pp. 253-267. ISSN 0959-6526

Ma, Xue and Zhang, Zuhua and Wang, Aiguo (2016) The transition of fly ash-based geopolymer gels into ordered structures and the effect on the compressive strength. Construction and Building Materials, 104. pp. 25-33. ISSN 0950-0618

Zhang, Z. and Yao, X. and Wang, H. (2010) Thermochemistry study of the effect of alkali content on the early geopolymerisation at room temperature. In: 1st International Conference on Advances in Chemically-Activated Materials (CAM 2010), 9-12 May 2010, Jinan, China.

cement mortar

Abousnina, Rajab M. and Manalo, Allan and Lokuge, Weena (2016) Physical and mechanical properties of cement mortar containing fine sand contaminated with light crude oil. Procedia Engineering, 145. 250- 258.

cemented carbides

Albdiry, M. T. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2014) Effect of SiC addition on mechanical and wear characteristics of WC-32(W-Ti)C-6Co cemented carbides. International Journal of Precision Technology, 4 (1/2). pp. 110-121. ISSN 1755-2060

Albdiry, Mushtaq and Alethari, Haydar (2012) Effect of alumina inclusions on microstructure and mechanical properties of 62 WC, 32 (Ti-W) C and 6 Co compacts. International Journal of Microstructure and Materials Properties, 7 (4). pp. 329-340. ISSN 1741-8410

ceramic microballoons

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2014) Compressive properties of ceramic microballoon syntactic foams. In: 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014), 26-27 Dec 2014, Khulna, Bangladesh.

ceramic microspheres

Ku, H. and Cardona, F. and Ball, J. and Jacobson, W. and Trada, M. (2008) Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study. Journal of Composite Materials, 42 (19). pp. 2083-2095. ISSN 0021-9983

CFRP

Sirimanna, C. S. and Banerjee, S. ORCID: https://orcid.org/0000-0001-5446-5290 and Karunasena, W. and Manalo, A. C. and McGarva, L. (2015) Analysis of retrofitted corroded steel pipes using internally bonded FRP composite repair systems. Australian Journal of Structural Engineering, 16 (3). pp. 187-198. ISSN 1328-7982

Lembo, Kurt and Lokuge, Weena and Karunasena, Warna (2014) Geopolymer concrete with FRP confinement. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 9-12 Dec 2014, Byron Bay, Australia.

Sirimanna, C. S. and Karunasena, W. and Manalo, A. C. and Banerjee, S. ORCID: https://orcid.org/0000-0001-5446-5290 and McGarva, L. (2013) Analysis of internal bonded fibre reinforced composite repair systems for corroded steel pipelines. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 Dec 2013, Melbourne, Australia.

Tawfik, Qaidar H. (2012) Rehabilitation of deteriorated steel truss members using CFRP. [Thesis (PhD/Research)]

Mutsuyoshi, H. and Aravinthan, T. and Asamoto, S. and Manalo, A. C. and Suzukawa, K. (2007) Flexural behavior of hybrid FRP girder with concrete deck. In: APFIS 2007: 1st Asia-Pacific Conference on FRP in Structures, 12-14 Dec 2007, Hong Kong, China.

CFRP composites

Cardona, Francisco and Tawfik, Qaidar H. and Karunasena, Karu (2012) Reinforcement of corroded steel structures with CFRP panels. In: ICACE 2012: International Conference on Architectural and Civil Engineering, 24-25 Oct 2012, Bali, Indonesia.

chain dynamics

Fang, Zhengping and Shang, Shuying and Wang, Hao (2013) Confinement of C60 nanoparticles on the dynamics of polystyrene studied by anelastic spectroscopy and rheometrics. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Challenges

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Van Erp, Gerard and Aravinthan, Thiru and Kaewunruen, Sakdirat and Remennikov, Alex (2015) Composite railway sleepers – recent developments, challenges and future prospects. Composite Structures, 134. pp. 158-168. ISSN 0263-8223

characteristics degradation

Azwa, Z. N. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Manalo, A. C. and Karunasena, W. (2013) A review on the degradability of polymeric composites based on natural fibres. Materials and Design, 47. pp. 424-442. ISSN 0264-1275

characterization

Muttashar, Majid and Karunasena, Warna and Manalo, Allan and Lokuge, Weena (2016) Behaviour of hollow pultruded GFRP square beams with different shear span-to-depth ratios. Journal of Composite Materials, 50 (21). pp. 2925-2940. ISSN 0021-9983

Muttashar, Majid and Karunasena, Warna and Manalo, Allan and Lokuge, Weena (2015) Testing and characterization of pultruded glass fiber reinforced polymer (GFRP) beams. In: Joint Conference of the 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & the 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015), 14-16 Dec 2015, Nanjing, China.

chemical analysis

Chan, Mo-lin and Lau, Kin-Tak and Wong, T. T. (2012) Interfacial bonding in a nanoclay/polymer composite. In: 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM 20), 15-18 Dec 2011, Hong Kong.

chemical bonds

Chan, Mo-lin and Lau, Kin-Tak and Wong, T. T. (2012) Interfacial bonding in a nanoclay/polymer composite. In: 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM 20), 15-18 Dec 2011, Hong Kong.

chemical composition

Misnon, M. I. and Islam, M. M. and Epaarachchi, J. A. and Lau, K. T. (2015) Analyses of woven hemp fabric characteristics for composite reinforcement. Materials and Design, 66 (A). pp. 82-92. ISSN 0264-1275

Chemical Mechanical Polishing

Zhou, Yan and Pan, Guoshun and Shi, Xiaolei ORCID: https://orcid.org/0000-0003-0905-2547 and Gong, Hua and Xu, Li and Zou, Chunli (2015) AFM and XPS studies on material removal mechanism of sapphire wafer during chemical mechanical polishing (CMP). Journal of Materials Science: Materials in Electronics, 26 (12). pp. 9921-9928. ISSN 0957-4522

Chemical Mechanical Polishing (CMP)

Zhou, Yan and Pan, Guoshun and Shi, Xiaolei ORCID: https://orcid.org/0000-0003-0905-2547 and Gong, Hua and Zou, Chunli and Xu, Li (2016) Effects of Silica Abrasive Size on Sapphire CMP Performances and Their Removal Mechanisms. In: 2015 International Conference on Planarization/CMP Technology (ICPT 2015), 30 Sept -2 Oct, 2015, Chandler, United States.

Chemical products

Shi, Xiaolei ORCID: https://orcid.org/0000-0003-0905-2547 and Pan, Guoshun and Zhou, Yan and Xu, Li and Zou, Chunli and Gong, Hua (2015) A study of chemical products formed on sapphire (0001) during chemical–mechanical polishing. Surface and Coatings Technology, 270. pp. 206-220. ISSN 0257-8972

Wang, Shujun and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Cole, Ivan and Li, Qin (2015) Structural evolution of graphene quantum dots during thermal decomposition of citric acid and the corresponding photoluminescence. Carbon, 82 (C). pp. 304-313. ISSN 0008-6223

chemical reactions

Wang, Shujun and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Cole, Ivan and Li, Qin (2015) Structural evolution of graphene quantum dots during thermal decomposition of citric acid and the corresponding photoluminescence. Carbon, 82 (C). pp. 304-313. ISSN 0008-6223

chemical treatment

Kabir, Mohammad Mazedul and Wang, Hao and Lau, Alan and Cardona, Francisco and Aravinthan, Thiru (2012) Compressive properties of chemically-treated hemp fibre reinforced composites. In: Composites Australia and CRC-ACS, 2012 Conference: Diversity in Composite, 15-16 Mar 2012, Leura, Australia.

chemical treatments

Wang, H. and Kabir, M. M. and Lau, K. T. (2014) Hemp reinforced composites with alkalization and acetylation fibre treatments. Polymers and Polymer Composites, 22 (3). pp. 247-252. ISSN 0967-3911

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. (2013) Tensile properties of chemically treated hemp fibres as reinforcement for composites. Composites Part B: Engineering , 53. pp. 362-368. ISSN 1359-8368

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. (2013) Effects of chemical treatments on hemp fibre structure. Applied Surface Science , 276. pp. 13-23. ISSN 0169-4332

Wang, Hao and Kabir, Mazed and Lau, K. T. (2013) Chemical treatments on hemp fibre composites. In: Fiber Society Spring 2013 Technical Conference (FS 2013): Advancing Scientific Knowledge Pertaining to Fibers and Fibrous Materials, 22-24 May 2013, Geelong, Australia.

Wang, H. and Kabir, M. M. and Lau, K. T. (2011) The effect of fibre chemical treatments on hemp reinforced composites. In: 18th International Conference on Composite Materials (ICCM 2011), 21-26 Aug 2011, Jeju Island, Korea.

chemical vapor deposition

Zou, Yi-Chao and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Kong, Fantai and Zhang, Enze and Drennan, John and Cho, Kyeongjae and Xiu, Faxian and Zou, Jin (2016) Surface-energy engineered Bi-doped SnTe nanoribbons with weak antilocalization effect and linear magnetoresistance. Nanoscale, 8 (46). pp. 19383-19389. ISSN 2040-3364

He, Dong-Ning and Hodgson, Peter and Gao, Wei-Min (2015) Epitaxial growth of multi-structure SnO2 by chemical vapor deposition. Acta Metallurgica Sinica (English Letters), 28 (7). pp. 946-950. ISSN 1006-7191

chemical vapour deposition

Zou, Yi-Chao and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Kong, Fantai and Zhang, Enze and Drennan, John and Cho, Kyeongjae and Xiu, Faxian and Zou, Jin (2016) Surface-energy engineered Bi-doped SnTe nanoribbons with weak antilocalization effect and linear magnetoresistance. Nanoscale, 8 (46). pp. 19383-19389. ISSN 2040-3364

Chemical-mechanical polishing

Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Zou, Chunli and Pan, Guoshun and Gong, Hua and Xu, Li and Zhou, Yan (2016) Atomically smooth gallium nitride surface prepared by chemical mechanical polishing with S2O8 2−-Fe2+ based slurry. Tribology International, 110. pp. 441-450. ISSN 0301-679X

Chemical–mechanical polishing

Shi, Xiaolei ORCID: https://orcid.org/0000-0003-0905-2547 and Pan, Guoshun and Zhou, Yan and Xu, Li and Zou, Chunli and Gong, Hua (2015) A study of chemical products formed on sapphire (0001) during chemical–mechanical polishing. Surface and Coatings Technology, 270. pp. 206-220. ISSN 0257-8972

chest protective equipment

Thota, Narasimha and Epaarachchi, Jayantha and Lau, Kin-Tak (2014) Development and validation of a thorax surrogate FE model for assessment of trauma due to high speed blunt impacts. Journal of Biomechanical Science and Engineering, 9 (1). 08-1. ISSN 1880-9863

chicken feathers

Cheng, Sha and Lau, Kin-Tak and Liu, Tao and Zhao, Yong-Qing and Lam, Pou-Man and Yin, Yansheng (2009) Mechanical and thermal properties of chicken feather fiber/PLA green composites. Composites Part B: Engineering, 40 (7). pp. 650-654. ISSN 1359-8368

chloride diffusion

Yang, Tao and Yao, Xiao and Zhang, Zuhua (2014) Quantification of chloride diffusion in fly ash-slag-based geopolymers by X-ray fluorescence (XRF). Construction and Building Materials, 69. pp. 109-115. ISSN 0950-0618

chloride penetration

Zhu, Huajun and Zhang, Zuhua and Zhu, Yingcan and Tian, Liang (2014) Durability of alkali-activated fly ash concrete: chloride penetration in pastes and mortars. Construction and Building Materials, 65. pp. 51-59. ISSN 0950-0618

chopped bagasse fibers

Trada, M. and Mandava, J. and Ku, H. and Yousif, B. ORCID: https://orcid.org/0000-0003-3847-5469 (2012) Tensile properties of bagasse reinforced epoxy composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

circular hole

Salleh, Z. and Islam, M. M. and Epaarachchi, J. A. (2016) Analysis of stress concentration factor around the hole of syntactic foam tensile specimens. International Journal of Advances in Science, Engineering and Technology, 4 (3). pp. 102-106. ISSN 2321-8991

civil applications

Azwa, Z. N. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Manalo, A. C. and Karunasena, W. (2013) A review on the degradability of polymeric composites based on natural fibres. Materials and Design, 47. pp. 424-442. ISSN 0264-1275

civil construction

Manalo, A. C. (2012) Recent developments on fibre composite sandwich structures in civil infrastructure. In: 6th International Composites Conference (ACUN 6): Composite and Nanocomposites in Civil, Offshore and Mining Infrastructure, 14-16 Nov 2012, Melbourne, Australia.

civil engineering

Manalo, Allan (2013) Fibre reinforced polymer composites sandwich structure: Recent developments and applications in civil infrastructure. In: 2013 International Research Conference on Innovations in Engineering, Science and Technology (IRCIEST 2013), 27-29 Nov 2013, Batangas State University, Batangas, Philippines.

Aravinthan, Thiru and Manalo, Allan (2011) Student performance in an online postgraduate course on fibre composites for civil engineers. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

civil engineering applications

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2014) An overview of mechanical properties and durability of glass-fibre reinforced recycled mixed plastic waste composites. Materials and Design, 62. pp. 98-112. ISSN 0264-1275

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2012) A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials and Design, 33 (1). pp. 534-544. ISSN 0264-1275

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2011) Multi-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applications. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Davey, Scott W. and Heldt, Tim and Van Erp, Gerard and Ayers, Stephen R. (2005) Vinylester/cenosphere composite materials for civil and structural engineering. FRP International : The Official Newsletter of the International Institute for FRP in Construction, 2 (3). pp. 2-5.

civil engineers

Aravinthan, Thiru and Manalo, Allan (2011) Student performance in an online postgraduate course on fibre composites for civil engineers. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

civil infrastructure

Maranan, Ginghis B. and Manalo, Allan C. and Karunasena, Warna and Benmokrane, Brahim and Mendis, Priyan (2015) Flexural response of GFRP-reinforced geopolymer concrete beams. In: 27th Biennial National Conference of the Concrete Institute of Australia (Concrete 2015) in conjunction with the 69th RILEM Week: Construction Innovations, Research into Practice, 30 Aug - 2 Sept 2015, Melbourne, Australia.

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2013) A review of FRP composite truss systems and its connection. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22): Materials to Structures: Advancement through Innovation , 11-14 Dec 2012, Sydney, Australia.

Aravinthan, T. (2012) Composites in civil infrastructure: R & D to applications. In: 6th International Composites Conference (ACUN 6): Composites and Nanocomposites in Civil, Offshore and Mining Infrastructure , 14-16 Nov 2012, Melbourne, Australia.

Aravinthan, Thiru, ed. (2008) Fibre composites in civil infrastructure: past, present and future. University of Southern Queensland, Toowoomba, Australia.

civil infrastructures

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2012) A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials and Design, 33 (1). pp. 534-544. ISSN 0264-1275

clamped plates

Choy, Y. S. and Liu, Y. and Cheung, H. Y. and Xi, Q. and Lau, K. T. (2012) Development of composite plate for compact silencer design. Journal of Sound and Vibration, 331 (10). pp. 2348-2364. ISSN 0022-460X

clay

Mishra, Ananta Kumar and Bae, Seon-Hyeong and Kim, Nam Hoon and Lau, Kin-tak and Lee, Joong Hee (2012) Nafion-peptized laponite clay nanocomposite membrane for PEMFC. In: 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM 20), 15-18 Dec 2011, Hong Kong.

Wang, Zhicai and Xu, Cailing and Zhao, Yongqing and Zhao, Dandan and Wang, Zhe and Li, Hulin and Lau, Kin-Tak (2008) Fabrication and mechanical properties of exfoliated clay-CNTs/epoxy nanocomposites. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 490 (1-2). pp. 481-487. ISSN 0921-5093

clay minerals

Zhao, Li Zhi and Zhou, Chun Hui and Wang, Jing and Tong, Dong Shen and Yu, Wei Hua and Wang, Hao (2015) Recent advances in clay mineral-containing nanocomposite hydrogels. Soft Matter, 11 (48). pp. 9229-9246. ISSN 1744-683X

clay nanocomposites

Albdiry, Mushtaq T. and Yousif, Belal F. ORCID: https://orcid.org/0000-0003-3847-5469 and Ku, Harry (2013) Fracture toughness and toughening mechanisms of unsaturated polyester-based clay nanocomposites. In: 13th International Conference on Fracture (ICF 2013), 16-21 Jun 2013, Beijing, China.

clogging

Mishra, Krishna and Zhuge, Yan and Karunasena, Karu (2013) Clogging mechanism of permeable concrete: A review. In: Concrete 2013: Understanding Concrete, 16-18 Oct 2013, Gold Coast, Australia.

cloth cover factor

Misnon, Mohd Iqbal and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Lau, Kin-tak (2014) Selection of hemp fabric as reinforcement in composite materials. In: 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014), 26-27 Dec 2014, Khulna, Bangladesh.

clothing

Wang, Xin and Shen, Xiaolin and Xu, Weilin (2012) Effect of hydrogen peroxide treatment on the properties of wool fabric. Applied Surface Science, 258 (24). pp. 10012-10016. ISSN 0169-4332

CNTs

Yao, X. and Wu, C. Z. and Wang, H. and Cheng, H. M. and Lu, G. Q. Max (2005) Hydrogen storage of magnesium-based nanocomposites system. Journal of Materials Science & Technology, 21 (s 1). pp. 57-60. ISSN 1005-0302

coal seam gas

Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Hamilton, Christopher and Ferbina, Tasha Rahman and Rufford, Thomas E. (2016) Smart, porous polymer coatings to bind clay minerals in coal bed methane wells. In: 10th International Petroleum Technology Conference (IPTC 2016), 14-16 Nov 2016, Bangkok, Thailand.

Abousnina, Rajab M. and Nghiem, Long D. and Bundschuh, Jochen (2015) Comparison between oily and coal seam gas produced water with respect to quantity, characteristics and treatment technologies: a review. Desalination and Water Treatment, 54 (7). pp. 1793-1808. ISSN 1944-3994

coal seem gas

Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Guenot, Laetitia and Rufford, Thomas and Mohoney, Shilo (2014) Controlling fines in coal seam gas wells using MgO nanoparticles. In: Energy Future Conference (2014), 3-5 Nov 2014, Sydney, Australia.

coal-seam gas

Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Khan, Chawarwan and Rufford, Thomas E. and Rudolph, Victor (2015) Measurements of gas-liquid relative permeability of Queensland coals. In: AAPG Asia Pacific Region, Geoscience Technology Workshop (2015), 12-13 Feb 2015, Brisbane, Australia.

coating

Al-Sandooq, Jaafar Mahdi and Yousif, Belal ORCID: https://orcid.org/0000-0003-3847-5469 and Jensen, T. A. (2015) Influence of metal coating on sorghum milling process subjected to three body abrasion. International Journal of Precision Technology, 5 (1). pp. 27-42. ISSN 1755-2060

Zhang, Zuhua and Yao, Xiao and Wang, Hao (2012) Potential application of geopolymers as protection coatings for marine concrete III. Field experiment. Applied Clay Science, 67-68. pp. 57-60. ISSN 0169-1317

Zhang, Zuhua and Yao, Xiao and Zhu, Huajun (2010) Potential application of geopolymers as protection coatings for marine concrete I. Basic properties. Applied Clay Science, 49 (1/2). pp. 1-6. ISSN 0169-1317

coating methods

Chen, Ling and Tang, Chak Yin and Ku, Harry Siu Lung and Chen, Da Zhu and Tsui, Chi Pong (2013) Surface coating of poly-D-L-lactide/nano-hydroxyapatite composite scaffolds for dexamethasone-releasing function and wettability enhancement. In: Materials Science and Technology Conference (MS&T 2012): Next Generation Biomaterials and Surface Properties of Biomaterials , 27-31 Oct 2012, Pittsburgh, PA. United States.

coatings

Wang, Xin and Fan, Jintu (2014) Use of aluminum-coated interlayers to develop a cold-protective fibrous assembly. Journal of Applied Polymer Science, 131 (9). ISSN 0021-8995

Doherty, William and Halley, Peter J. and Edye, Les and Rogers, David and Cardona, Francisco and Park, Yosup and Woo, Tim (2007) Studies on polymers and composites from lignin and fiber derived from sugar cane. Polymers for Advanced Technologies, 18 (8). pp. 673-678. ISSN 1042-7147

coatings and finishes

Liao, Z. M. and Xu, H. Y. and Sun, W. and Guo, Y. N. and Yang, L. and Chen, Z. G. ORCID: https://orcid.org/0000-0002-9309-7993 and Zou, J. and Lu, Z. Y. and Chen, P. P. and Lu, W. (2012) Effects of Au catalyst on GaAs (111)B surface during annealing. In: 2012 Conference on Optoelectronic and Microelectronic Materials and Devices (COMMAD 2012), 12-14 Dec 2012, Melbourne, Australia.

coconut

Salleh, Z. and Islam, M. M. and Yusop, M. Y. M. and Idrus, M. A. Munaim M. (2014) Mechanical properties of activated carbon (AC) coconut shell reinforced polypropylene composites encapsulated with epoxy resin. In: 5th International Conference on Chemical, Biological and Environmental Engineering (ICBEE 2013), 14-15 Sep 2013, New Delhi, India.

coconut shell

Misnon, M. I. and Bahari, S. A. and Islam, M. M. and Epaarachchi, J. A. (2013) Integration of textile fabric and coconut shell in particleboard. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

codes of practice

Charles, Michael and Furneaux, Craig and Pillay, Janet and Thorpe, David and Parades Castello, Cynthya and Brown, Kerry (2007) Uptake of an OHS Code of Practice by Australian construction firms. In: CIB World Building Congress 2007: Construction for Development, 14-17 May 2007, Cape Town, South Africa.

codes of practice and standards

Ayers, Stephen R. and van Erp, Gerard (2004) A Code of Practice for the structural design of fibre composites. Proceedings of the Institution of Civil Engineers, Structures & Buildings, 157 (1). pp. 3-8. ISSN 1751-7702

cohesion

Abousnina, Rajab M. and Shiau, Jim ORCID: https://orcid.org/0000-0002-9220-3184 and Manalo, Allan and Lokuge, Weena (2014) Effect of light hydrocarbons contamination on shear strength of fine sand. In: 4th International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2014), 19-21 Nov 2014, Brisbane, Australia.

cohesive element

Kakei, Ayad and Epaarachchi, J. A. and Islam, Mainul and Leng, J. and Rajic, N. (2016) Detection and characterisation of delamination damage propagation in woven glass fibre reinforced polymer composite using thermoelastic response mapping. Composite Structures, 153. pp. 442-450. ISSN 0263-8223

cohesive interface modelling

Zeng, Xuesen and Schubel, Peter and Lorrillard, Julien (2016) Modelling VARTM process induced variations on bending performance of composite Omega beams. Composites Part A, 90. pp. 371-379. ISSN 1359-835X

coil

Wang, Xin and Xu, Weilin (2012) Effect of experimental parameters on needleless electrospinning from a conical wire coil. Journal of Applied Polymer Science, 123 (6). pp. 3703-3709. ISSN 0021-8995

coil dimensions

Wang, Xin and Niu, Haitao and Wang, Xungai and Lin, Tong (2012) Needleless electrospinning of uniform nanofibers using spiral coil spinnerets. Journal of Nanomaterials, 2012. pp. 1-9. ISSN 1687-4110

coiled carbon nanotube

Li, Xiao-Feng and Lau, Kin-Tak and Yin, Yan-Sheng (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology, 68 (14). pp. 2876-2881. ISSN 0266-3538

coiled carbon nanotubes

Li, Xiao-Feng and Lau, Kin-Tak and Yin, Yan-Sheng (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology, 68 (14). pp. 2876-2881. ISSN 0266-3538

coiled nanotubes

Li, Xiao-Feng and Lau, Kin-Tak and Yin, Yan-Sheng (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology, 68 (14). pp. 2876-2881. ISSN 0266-3538

coir fiber

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Ku, H. (2012) Suitability of using coir fiber/polymeric composite for the design of liquid storage tanks. Materials and Design, 36. pp. 847-853. ISSN 0264-1275

coli

Khan, Belas Ahmed and Wang, Jing and Warner, Philip and Wang, Hao (2015) Antibacterial properties of hemp hurd powder against E. coli. Journal of Applied Polymer Science, 132 (10). 41588/1-41588/6. ISSN 0021-8995

collapsed tubes

Guades, Ernesto J. and Aravinthan, Thiru and Islam, Md. Mainul and Manalo, Allan C. (2012) Stiffness of FRP pultruded tubes under repeated axial impacts. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

collision and contact sports

Thota, Narasimha M. and Epaarachchi, Jayantha A. and Lau, Kin Tak (2014) Evaluation of the blunt thoracic trauma due to baseball impacts – review of the Blunt Criterion. In: 8th Australasian Congress on Applied Mechanics, 24-26 Nov 2014, Melbourne, Australia.

column

Omar, T. and Aravinthan, T. and Van Erp, G. (2007) The effect of core architecture on the behaviour of sandwich columns under edgewise compression loading. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

columnar equiaxed transition (CET)

Yao, Xiangdong and Wang, Hao and He, B. and Zhou, X. (2005) Modeling of columnar-to-equiaxed transition in solidified Al-Si alloys. In: 5th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 5), 2-5 Nov 2004, Beijing, China.

combed ring spun yarns

Xia, Zhigang and Wang, Xin and Ye, Wenxiang and Xu, Weilin and Zhang, Jianxiang and Zhao, Haito (2009) Experimental investigation on the effect of singeing on cotton yarn properties (+Erratum). Textile Research Journal, 79 (17). pp. 1610-1615. ISSN 0040-5175

combustion

Yan, Hongqiang and Wang, Huaqing and Cheng, Jie and Fang, Zhengping and Wang, Hao (2015) Effect of iron acetylacetonate on the crosslink structure, thermal and flammability properties of novel aromatic diamine-based benzoxazines containing cyano group. RSC Advances, 5 (24). pp. 18538-18545.

Liu, Shan and Yan, Hongqiang and Fang, Zhengping and Guo, Zhenghong and Wang, Hao (2014) Effect of graphene nanosheets and layered double hydroxides on the flame retardancy and thermal degradation of epoxy resin. RSC Advances, 4 (36). pp. 18652-18659.

compact spun yarns

Xia, Zhigang and Wang, Xin and Ye, Wenxiang and Xu, Weilin and Zhang, Jianxiang and Zhao, Haito (2009) Experimental investigation on the effect of singeing on cotton yarn properties (+Erratum). Textile Research Journal, 79 (17). pp. 1610-1615. ISSN 0040-5175

compaction

Hutchinson, J. R. and Schubel, P. J. (2014) A coupled structural and flow approach for numerical simulation of the light resin transfer moulding process. II: Fabric permeability and compaction characterisation, model results and a 6-kW wind turbine case study. Journal of Reinforced Plastics and Composites, 33 (13). pp. 1237-1257. ISSN 0731-6844

comparison

Salleh, Z. and Islam, M. M. and Ku, H. (2014) Study on compressive properties of syntactic foams for marine applications. Journal of Multifunctional Composites, 2 (1). pp. 21-27. ISSN 2168-4278

Salleh, Z. and Islam, M. M. and Ku, H. (2013) Preliminary study on the development of syntactic foams for marine applications. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

compatibilization

Fuqua, Michael A. and Chevali, Venkata S. ORCID: https://orcid.org/0000-0002-5648-0344 and Ulven, Chad A. (2013) Lignocellulosic byproducts as filler in polypropylene: comprehensive study on the effects of compatibilization and loading. Journal of Applied Polymer Science, 127 (2). pp. 862-868. ISSN 0021-8995

Si, Xiaojuan and Guo, Linfeng and Wang, Yimin and Lau, Kin-Tak (2008) Preparation and study of polypropylene/polyethylene terephthalate composite fibres. Composites Science and Technology, 68 (14). pp. 2943-2947. ISSN 0266-3538

compatibilized blends

Si, Xiaojuan and Guo, Linfeng and Wang, Yimin and Lau, Kin-Tak (2008) Preparation and study of polypropylene/polyethylene terephthalate composite fibres. Composites Science and Technology, 68 (14). pp. 2943-2947. ISSN 0266-3538

complex oil and gas reservior

Zhu, H. J. and Yao, X. and Zhang, Z. H. (2010) Study on non-cement based alkali activated material for oil and gas well cementing at low and moderate temperature. In: 1st International Conference on Advances in Chemically-Activated Materials (CAM 2010), 9-12 May 2010, Jinan, China.

complex structures

Aravinthan, T. and Omar, T. (2008) Fibre composite windmill structure - challenges in the design and development. In: 4th International Conference on FRP Composites in Civil Engineering (CICE 2008), 22-24 Jul 2008, Zurich, Switzerland.

component

Parameswaran, Vinod and Zhang, Zhongwei ORCID: https://orcid.org/0000-0001-6622-0346 and Zhou, Hong (2014) Numerical terrain modelling for wireless underground sensor networks: a protoype for nut tree plantations. In: 8th International Conference on Sensing Technology (ICST 2014), 2-4 Sep 2014, Liverpool, United Kingdom.

component specific damage index

Wickramasinghe, Wasanthi R. and Thambiratnam, David P. and Chan, Tommy H. T. and Nguyen, Theanh (2016) Vibration characteristics and damage detection in a suspension bridge. Journal of Sound and Vibration, 375. pp. 254-274. ISSN 0022-460X

composite

Epaarachchi, Jayantha Ananda and Kahandawa, Gayan Chanaka, eds. (2016) Structural health monitoring technologies and next-generation smart composite structures. Composite Materials: Analysis and Design. Taylor & Francis (CRC Press), Roca Raton, USA. ISBN 978-1-4822-2691-1

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2015) Compressive behaviour of low density polymeric syntactic foams. Applied Mechanics and Materials, 799-800. pp. 135-139. ISSN 1660-9336

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2015) Mechanical properties of low density glass microballoon/vinyl ester syntactic foam for marine application. In: 12th Composites Australia and CRC-ACS Conference 2015: Game On, 21-23 April 2015, Gold Coast, Australia.

Epaarachchi, Jayantha and Canning, John and Leng, Jinsong and Lau, Alan and Mendis, Priyan, eds. (2015) Nano technology and smart sensors for structural health monitoring [Special issue of Structural Health Monitoring, Vol. 14, No. 2, March 2015]. Sage Publications, United Kingdom.

Misnon, M. I. and Islam, M. M. and Epaarachchi, J. and Lau, K. T. (2013) Textile material forms for reinforcement materials: a review. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2013) Design of newly fabricated tribological machine for wear and frictional experiments under dry/wet condition. Materials and Design, 48. pp. 2-13. ISSN 0261-3069

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak (2013) Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs. Composite Structures, 100. pp. 40-54. ISSN 0263-8223

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2012) Investigation of the free vibration behaviour of an innovative GFRP sandwich floor panel. Construction and Building Materials, 37. pp. 209-219. ISSN 0950-0618

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak and Elder, David (2012) Fibre composites for high pressure pipeline repairs, in-air and subsea: an overview. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012) , 2-4 Feb 2012, Sapporo, Japan.

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2011) Natural fibre composites with QLD based fibres and vegetable oils. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Sirimanna, Chamila S. and Islam, Md Mainul and Aravinthan, Thiru (2010) Effects of temperature on a pultruded FRP composite. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Western Australia.

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2010) Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review. In: Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Naebe, Minoo and Wang, Jing and Xue, Yuhua and Wang, Xungai and Lin, Tong (2010) Carbon nanotube reinforced rigid-rod polyimide. Journal of Applied Polymer Science, 118 (1). pp. 359-365. ISSN 0021-8995

Ku, H. and Kota, V. and Trada, M. (2010) Optimum percentage of fly ash reinforcement in vinyl ester composites. Journal of Materials in Civil Engineering, 22 (1). pp. 104-107. ISSN 0899-1561

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2009) Finite element analysis of fibre composite sandwich panel. In: Southern Engineering Conference, 17-18 Oct 2009, Springfield, Queensland, Australia.

Manalo, Allan and Mutsuyoshi, Hiroshi and Aravinthan, Thiru and Matsui, Takahiro (2009) Behaviour of hybrid FRP composite I-girder with concrete deck. In: 9th International Symposium of the Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures (FRPRCS-9): Current Challenges and Future Trends, 13-15 Jul 2009, Sydney, Australia.

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Islam, Mainul (2009) Flexural behaviour of composite sandwiches for structural applications. In: Proceedings of the 9th International Symposium on Fibre Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-9): Current Challenges and Future Trends, 13-15 Jul 2009, Sydney, Australia.

Li, Xiao-Feng and Lau, Kin-Tak and Yin, Yan-Sheng (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology, 68 (14). pp. 2876-2881. ISSN 0266-3538

Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2007) Tungsten fibre reinforced Zr-based bulk metallic glass composites. Materials and Manufacturing Processes, 22 (5-6). pp. 687-691. ISSN 1042-6914

composite action

Manalo, A. C. and Aravinthan, T. and Mutsuyoshi, H. and Matsui, T. (2012) Composite behaviour of a hybrid FRP bridge girder and concrete deck. Advances in Structural Engineering, 15 (4). pp. 589-600. ISSN 1369-4332

Mutsuyoshi, H. and Aravinthan, T. and Asamoto, S. and Manalo, A. C. and Suzukawa, K. (2007) Flexural behavior of hybrid FRP girder with concrete deck. In: APFIS 2007: 1st Asia-Pacific Conference on FRP in Structures, 12-14 Dec 2007, Hong Kong, China.

composite beam

Muttashar, Majid and Manalo, Allan and Karunasena, Warna and Lokuge, Weena (2016) Influence of infill concrete strength on the flexural behaviour of pultruded GFRP square beams. Composite Structures, 145. pp. 58-67. ISSN 0263-8223

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Khennane, Amar and Kayali, Obada (2015) Geopolymer concrete-filled pultruded composite beams: concrete mix design and application. Cement and Concrete Composites, 58. pp. 1-13. ISSN 0958-9465

Mutsuyoshi, Hiroshi and Hai, Nguyen Duc and Shiroki, Kensuke and Aravinthan, Thiru and Manalo, Allan (2011) Experimental investigation of HFRP composite beams. In: 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-10) , 2-4 Apr 2011, Tampa, FL. United States.

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

composite beams

Manalo, Allan and Mutsuyoshi, Hiroshi (2012) Behavior of fiber-reinforced composite beams with mechanical joints. Journal of Composite Materials, 46 (4). pp. 483-496. ISSN 0021-9983

composite beams and girders

Aravinthan, Thiru and Kahandawa, Gayan (2014) Investigation of full-scale fibre composite girders for replacement of hardwood timber girders in Australia. In: 7th International Conference on FRP Composites in Civil Engineering (CICE 2014), 20-22 Aug 2014, Vancouver, Canada.

composite bridges

Aravinthan, Thiru and Kahandawa, Gayan (2014) Investigation of full-scale fibre composite girders for replacement of hardwood timber girders in Australia. In: 7th International Conference on FRP Composites in Civil Engineering (CICE 2014), 20-22 Aug 2014, Vancouver, Canada.

composite fibres

Si, Xiaojuan and Guo, Linfeng and Wang, Yimin and Lau, Kin-Tak (2008) Preparation and study of polypropylene/polyethylene terephthalate composite fibres. Composites Science and Technology, 68 (14). pp. 2943-2947. ISSN 0266-3538

composite laminate

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

composite materials

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. and Followell, D. and Birt, P. (2013) Use of fixed wavelength Fibre-Bragg Grating (FBG) filters to capture time domain data from the distorted spectrum of an embedded FBG sensor to estimate strain with an artificial neural network. Sensors and Actuators A: Physical, 194. pp. 1-7. ISSN 0924-4247

Schubel, P. J. and Crossley, R. J. and Boateng, E. K. G. and Hutchinson, J. R. (2013) Review of structural health and cure monitoring techniques for large wind turbine blades. Renewable Energy, 51. pp. 113-123. ISSN 0960-1481

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Lau, K. T. (2013) Prediction of obsolete FBG sensor using ANN for efficient and robust operation of SHM systems. In: 4th Asia-Pacific Workshop on Structural Health Monitoring, 5-7 Dec 2012, Melbourne, Australia.

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. and Lau, K. T. (2012) Optimized FBG sensor network for efficient detection of a delamination in FRP structures. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Chin, C. W. (2012) Epoxy composite based on kenaf fibers for tribological applications under wet contact conditions. Surface Review and Letters, 19 (5). pp. 1250050-1. ISSN 0218-625X

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. (2011) Identification of distortions to FBG spectrum using FBG fixed filters. In: 18th International Conference on Composite Materials (ICCM 2011): Composite Materials: Key to the Future, 21-26 Aug 2011, Jeju, Korea.

Epaarachchi, J. A. (2011) The effect of viscoelasticity on fatigue behaviour of polymer matrix composites. In: Creep and fatigue in polymer matrix composites. Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 492-513. ISBN 978-1-84569-656-6

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Followell, David and Birt, Peter and Canning, John and Stevenson, Michael (2010) An investigation of spectral response of embedded Fibre Bragg Grating (FBG) sensors in a hollow composite cylindrical beam under pure torsion and combined loading. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Australia.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Canning, John (2010) Effects of the self distortions of embedded FBG sensors on spectral response due to torsional and combined loads. In: 3rd Asia-Pacific Workshop on Structural Health Monitoring (APWSHM 2010), 30 Nov-2 Dec 2010, Tokyo, Japan.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Aravinthan, Thiru (2010) The developments of structural health/integrity monitoring systems using FBG sensors at CEEFC of USQ. In: Southern Region Engineering Conference (SREC 2010) , 11-12 Nov 2010, Toowoomba, Australia.

Lau, Kin-Tak and Epaarachchi, Jayantha and Sudarshan, T. S. (2010) Sensors, actuators, and intelligent processing [Preface]. Materials and Manufacturing Processes, 25 (4). p. 211. ISSN 1042-6914

Vandenbroucke, A. and Cardona, F. and Ku, H. and Rogers, D. (2009) Effects of chopped hemp on mechanical and thermal properties of epoxy resins. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Cardona, F. and Moscou, C. (2009) Synthesis and characterization of modified phenolic resins for composites with enhanced mechanical properties. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Goh, S. and Ku, H. and Ang, S. L. (2008) Prediction of crushing stress in composite materials. Journal of Composite Materials, 42 (5). pp. 467-484. ISSN 0021-9983

composite panels

Choy, Yat-Sze and Lau, Kin-Tak and Wang, C. and Chau, C. W. and Liu, Yang and Hui, D. (2009) Composite panels for reducing noise in air conditioning and ventilation systems. Composites Part B: Engineering, 40 (4). pp. 259-266. ISSN 1359-8368

composite piles

Guades, Ernesto and Aravinthan, Thiru and Islam, Mainul and Manalo, Allan (2012) A review on the driving performance of FRP composite piles. Composite Structures, 94 (6). pp. 1932-1942. ISSN 0263-8223

Guades, Ernesto J. and Aravinthan, Thiru and Islam, Md. Mainul and Manalo, Allan C. (2012) Stiffness of FRP pultruded tubes under repeated axial impacts. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Guades, E. J. and Aravinthan, T. and Islam, M. M. (2011) Driveability of composite piles. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011) , 27-29 Apr 2011, Brisbane, Australia.

Guades, E. J. and Aravinthan, T. and Islam, M. M. (2010) An overview on the application of FRP composites in piling system. In: Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

composite plate

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2015) Impact location determination on thin laminated composite plates using an NIR-FBG sensor system. Measurement, 61. pp. 51-57. ISSN 0263-2241

composite plates

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) Modal analysis of high frequency acoustic signal approach for progressive failure monitoring in thin composite plates. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Choy, Y. S. and Liu, Y. and Cheung, H. Y. and Xi, Q. and Lau, K. T. (2012) Development of composite plate for compact silencer design. Journal of Sound and Vibration, 331 (10). pp. 2348-2364. ISSN 0022-460X

Karunasena, W. (2008) Elastodynamic reciprocity relations for wave scattering by flaws in fiber-reinforced composite plates. Journal of Mechanics of Materials and Structures, 3 (10). pp. 1831-1846. ISSN 1559-3959

composite polymer matrix

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2012) A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials and Design, 33 (1). pp. 534-544. ISSN 0264-1275

composite properties

Kabir, M. M. and Wang, H. and Aravinthan, T. and Cardona, F. and Lau, K. -T. (2011) Effects of natural fibre surface on composite properties: a review. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE2011) , 27-29 Apr 2011, Brisbane, Australia.

composite recycling

Shah, Darshil U. and Schubel, Peter J. (2016) On recycled carbon fibre composites manufactured through a liquid composite moulding process. Journal of Reinforced Plastics and Composites, 35 (7). pp. 533-540. ISSN 0731-6844

composite repair

Sirimanna, C. S. and Banerjee, S. ORCID: https://orcid.org/0000-0001-5446-5290 and Karunasena, W. and Manalo, A. C. and McGarva, L. (2015) Analysis of retrofitted corroded steel pipes using internally bonded FRP composite repair systems. Australian Journal of Structural Engineering, 16 (3). pp. 187-198. ISSN 1328-7982

Sirimanna, C. S. and Karunasena, W. and Manalo, A. C. and Banerjee, S. ORCID: https://orcid.org/0000-0001-5446-5290 and McGarva, L. (2013) Analysis of internal bonded fibre reinforced composite repair systems for corroded steel pipelines. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 Dec 2013, Melbourne, Australia.

composite sandwich beam

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

composite sandwich beams

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) Flexural behaviour of glue-laminated fibre composite sandwich beams. Composite Structures, 92 (11). pp. 2703-2711. ISSN 0263-8223

Manalo, A. C. and Aravinthan, T. and Karunasena, W. and Islam, M. M. (2010) Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions. Composite Structures, 92 (4). 984-995 . ISSN 0263-8223

composite sandwich panel

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Su, Haibin (2016) Mechanical properties of sandwich composite made of syntactic foam core and GFRP skins. AIMS Materials Science, 3 (4). pp. 1704-1727. ISSN 2372-0468

composite sandwich structure

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of glued fibre composite sandwich structure in flexure: experiment and fibre model analysis. Materials and Design, 39. pp. 458-468. ISSN 0264-1275

composite sandwiche

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2009) Flexural behaviour of laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

Karunasena, W. and Aravinthan, T. and Manalo, A. C. (2009) Vibration of debonded laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

composite sandwiches

Karunasena, Warna (2010) The effect of debonding on the natural frequencies of laminated fibre composite sandwich plates. In: 6th Australasian Congress on Applied Mechanics (ACAM 6) , 12-15 Dec 2010, Perth, Western Australia.

composite scaffolds

Chen, Ling and Tang, Chak Yin and Ku, Harry Siu Lung and Chen, Da Zhu and Tsui, Chi Pong (2013) Surface coating of poly-D-L-lactide/nano-hydroxyapatite composite scaffolds for dexamethasone-releasing function and wettability enhancement. In: Materials Science and Technology Conference (MS&T 2012): Next Generation Biomaterials and Surface Properties of Biomaterials , 27-31 Oct 2012, Pittsburgh, PA. United States.

Composite sleeper technologies

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Van Erp, Gerard and Aravinthan, Thiru and Kaewunruen, Sakdirat and Remennikov, Alex (2015) Composite railway sleepers – recent developments, challenges and future prospects. Composite Structures, 134. pp. 158-168. ISSN 0263-8223

composite structures

Kahandawa, Gayan C. and Epaarachchi, Jayantha and Wang, Hao and Canning, John and Lau, K. T. (2013) Extraction and processing of real time strain of embedded FBG sensors using a fixed filter FBG circuit and an artificial neural network. Measurement: Journal of the International Measurement Confederation , 46 (10). pp. 4045-4051. ISSN 0263-2241

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Lau, K. T. (2013) Indexing damage using distortion of embedded FBG sensor response spectra. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Manalo, Allan C. and Aravinthan, Thiru (2011) Flexural behaviour of glulam beams from novel sandwich panels. In: 16th International Conference on Composite Structures (ICCS 16), 28-30 July 2011, Porto, Portugal.

Epaarachchi, Jayantha A. and Rathnaweera, Gayan and Canning, John and Stevenson, Michael (2010) Response Fibre Bragg Grating (FBG) strain sensors embedded at different locations through the thickness around a delamination in a composite lamina. In: 7th Asian-Australasian Conference on Composites (ACCM7), 15-18 Nov 2010, Taipei, Taiwan.

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

Van Erp, Gerard and Cattell, Craig and Heldt, Tim (2005) Fibre composite structures in Australia's civil engineering market: an anatomy of innovation. Structural Control and Health Monitoring, 7 (3). pp. 150-160. ISSN 1365-0556

Ayers, Stephen R. and van Erp, Gerard (2004) A Code of Practice for the structural design of fibre composites. Proceedings of the Institution of Civil Engineers, Structures & Buildings, 157 (1). pp. 3-8. ISSN 1751-7702

composite systems

Choy, Yat-Sze and Lau, Kin-Tak and Wang, C. and Chau, C. W. and Liu, Yang and Hui, D. (2009) Composite panels for reducing noise in air conditioning and ventilation systems. Composites Part B: Engineering, 40 (4). pp. 259-266. ISSN 1359-8368

composite systems fly ash

Lokuge, Weena and Aravinthan, Thiru and Sirimanna, Chamila Sampath and Islam, Mainul (2011) Influence of fly ash proportions on properties of polymer concrete with polyester resin. In: 25th Biennial Conference of the Concrete Institute of Australia (Concrete 2011): Building a Sustainable Future, 12-14 Oct 2011, Perth, Australia.

composite tooling

Hutchinson, J. R. and Schubel, P. J. (2014) A coupled structural and flow approach for numerical simulation of the light resin transfer moulding process. II: Fabric permeability and compaction characterisation, model results and a 6-kW wind turbine case study. Journal of Reinforced Plastics and Composites, 33 (13). pp. 1237-1257. ISSN 0731-6844

composite tubes

Guades, Ernesto Jusayan (2013) Behaviour of glass FRP composite tubes under repeated impact for piling application. [Thesis (PhD/Research)]

composite walls

Manalo, Allan (2013) Structural behaviour of a prefabricated composite wall system made from rigid polyurethane foam and magnesium oxide board. Construction and Building Materials, 41. pp. 642-653. ISSN 0950-0618

composites

Matveev, M. Y. and Schubel, P. J. and Long, A. C. and Jones, I. A. (2016) Understanding the buckling behaviour of steered tows in automated dry fibre placement (ADFP). Composites Part A: Applied Science and Manufacturing, 90. pp. 451-456. ISSN 1359-835X

Misnon, Mohd Iqbal and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Chen, Haizhen and Wang, Hao (2016) Woven hemp fabric reinforced vinyl ester composite treated with fire retardant. International Journal of Advances in Science Engineering and Technology, 4 (3). pp. 90-95. ISSN 2321-8991

Wang, Yueqiong and Liao, Lusheng and Zhong, Jieping and He, Dongning and Xu, Kui and Yang, Changjin and Luo, Yongyue and Peng, Zheng (2016) The behavior of natural rubber–epoxidized natural rubber–silica composites based on wet masterbatch technique. Journal of Applied Polymer Science, 133 (26). pp. 43571-43579. ISSN 0021-8995

Maranan, Ginghis B. and Manalo, Allan C. and Karunasena, Warna M. and Benmokrane, Brahim and Mendis, Priyan A. (2015) Comparison of the shear behaviour of geopolymer concrete beams with GFRP and steel transverse reinforcements. In: Joint Conference of the 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & the 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015), 14-16 Dec 2015, Nanjing, China.

Sirimanna, C. S. and Manalo, A. C. and Karunasena, W. and Banerjee, S. ORCID: https://orcid.org/0000-0001-5446-5290 and McGarva, L. (2015) Fibre-reinforced polymer (FRP) repair systems for corroded steel pipelines. In: Rehabilitation of pipelines using fibre-reinforced polymer (FRP) composites. Woodhead Publishing Series in Civil and Structural Engineering (52). Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 267-285. ISBN 978-0-85709-684-5

Misnon, Mohd Iqbal and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Lau, Kin-tak (2014) Selection of hemp fabric as reinforcement in composite materials. In: 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014), 26-27 Dec 2014, Khulna, Bangladesh.

Manalo, Allan (2014) Structural behavior of fibre composite guardrails. In: 7th International Conference on FRP Composites in Civil Engineering (CICE 2014), 20-22 Aug 2014, Vancouver, Canada.

Khan, Belas Ahmed and Warner, Philip and Wang, Hao (2014) Antibacterial properties of hemp and other natural fibre plants: a review. BioResources, 9 (2). pp. 3642-3659.

Hafizi, Z. M. and Kahandawa, G. C. and Epaarachchi, J. and Lau, K. T. and Canning, J. and Cook, K. (2013) NIR fibre bragg grating as dynamic sensor: an application of 1D digital wavelet analysis for signal denoising. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2013) Effect of skin-core debonding on the dynamic behaviour of GFRP composite beams. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Ku, H. and Trada, M. and Tai, P. (2013) Dielectric properties of sawdust reinforced epoxy composites post-cured in microwaves. Journal of Reinforced Plastics and Composites, 32 (10). pp. 765-774. ISSN 0731-6844

Ho, Mei-Po and Wang, Hao and Lau, Kin-Tak and Leng, Jinsong (2013) Effect of silk fiber to the mechanical and thermal properties of its biodegradable composites. Journal of Applied Polymer Science , 127 (4). pp. 2389-2396. ISSN 0021-8995

Alsaeed, T. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Ku, H. (2013) The potential of using date palm fibres as reinforcement for polymeric composites. Materials and Design, 43. pp. 177-184. ISSN 0264-1275

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2013) A review of FRP composite truss systems and its connection. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22): Materials to Structures: Advancement through Innovation , 11-14 Dec 2012, Sydney, Australia.

Yousif, Belal F. ORCID: https://orcid.org/0000-0003-3847-5469 and Islam, Md Mainul and Salit, Mohd Sapuan (2013) Sustainable composites [Editorial]. Advances in Materials Science and Engineering. ISSN 1687-8434

Ku, H. and Yap, Y. S. and Lee, T. S. and Trada, M. (2012) Tensile properties of phenol-formaldehyde nanoclay reinforced composites: a pilot study. Journal of Applied Polymer Science, 126 (s2). E142-E150. ISSN 0021-8995

Aravinthan, T. (2012) Composites in civil infrastructure: R & D to applications. In: 6th International Composites Conference (ACUN 6): Composites and Nanocomposites in Civil, Offshore and Mining Infrastructure , 14-16 Nov 2012, Melbourne, Australia.

Ho, M. P. and Wang, H. and Lau, K. T. and Jayaraman, K. and Bhattacharyya, D. (2012) Mechanical properties of a bamboo charcoal reinforced polylactic acid composite. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of glued fibre composite sandwich structure in flexure: experiment and fibre model analysis. Materials and Design, 39. pp. 458-468. ISSN 0264-1275

Ku, H. and Wong, P. and Huang, J. and Fung, H. and Trada, M. (2012) Flexural properties of epoxy composites filled with glass powder: preliminary results. Advanced Material Research, 410. pp. 309-312. ISSN 1022-6680

Hafizi, Z. M. and Epaarachchi, J. and Nizwan, C. K. E. and Lau, K. T. (2012) Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study. IOP Conference Series: Materials Science and Engineering, 36 (1). ISSN 1757-8981

Malvern, J. L. and Epaarachchi, J. A. and Lau, K. T. (2011) Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions. In: 18th International Conference on Composite Materials (ICCM-18), 21-26 Aug 2011, Jeju Island, South Korea.

Lau, Alan K. T. and Ho, Mabel M. P. (2011) Recent research trend in natural-fibre composites. JEC Composites (67). pp. 50-52. ISSN 1639-965X

Ho, Mei-Po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Mechanical properties of an injected silk fibre reinforced PLA composite. In: 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX), 14-17 Jan 2011, Auckland, New Zealand.

Islam, M. M. and Aravinthan, T. (2011) Behaviour of fibre composite sandwich panels under uniformly distributed loading. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Epaarachchi, J. A. (2011) The effect of viscoelasticity on fatigue behaviour of polymer matrix composites. In: Creep and fatigue in polymer matrix composites. Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 492-513. ISBN 978-1-84569-656-6

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

Ku, H. and Trada, M. and Cecil, T. and Wong, P. (2010) Tensile tests of phenol formaldehyde glass-powder-reinforced composites: pilot study. Journal of Applied Polymer Science, 116 (1). pp. 10-17. ISSN 0021-8995

Guo, Qing Bing and Lau, Kin-Tak and Zheng, Bing Fa and Rong, Min Zhi and Zhang, Ming Qiu (2009) Imparting ultra-low friction and wear rate to epoxy by the incorporation of microencapsulated lubricant? Macromolecular Materials and Engineering, 294 (1). pp. 20-24. ISSN 1438-7492

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao, eds. (2009) Futures in mechanics of structures and materials: proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), Toowoomba, Australia, 2-5 December 2008. Taylor & Francis (CRC Press), London, United Kingdom. ISBN 978-0-415-49196-9

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2008) Investigation of embedded near infrared fibre Bragg grating (FBG) sensors (830 nm) in structural health monitoring of glass fibre composite structures. In: 19th International Conference on Optical Fibre Sensors (OFS-19), 15-18 Apr 2008, Perth, Australia.

Epaarachchi, J. A. and Karunasena, W. and Aravinthan, T. (2008) Dynamic behavior of hybrid composite bridge girder. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Ku, H. and Chan, W. L. and Trada, M. and Baddeley, D. (2007) An evaluation of fracture toughness of vinyl ester composites cured under microwave conditions. Journal of Materials Engineering and Performance, 16 (6). pp. 741-745. ISSN 1059-9495

Doherty, William and Halley, Peter J. and Edye, Les and Rogers, David and Cardona, Francisco and Park, Yosup and Woo, Tim (2007) Studies on polymers and composites from lignin and fiber derived from sugar cane. Polymers for Advanced Technologies, 18 (8). pp. 673-678. ISSN 1042-7147

Omar, T. and Van Erp, G. and Key, P. (2007) Modular deployable composite shelters - truss system. In: ACIC 2007: Advanced Composites in Construction Conference , 2-4 Apr 2007, Bath, UK.

Omar, T. and Van Erp, G. and Key, P. W. (2006) Stressed arch modular deployable composite shelters: concept and development. In: CICE 2006: 3rd International Conference on FRP Composites in Civil Engineering, 13-15 Dec 2006, Miami, Fl, USA.

Epaarachchi, Jayantha A. (2006) Assessment of damage accumulation in glass fibre reinforced plastic (GFRP) composites under spectrum fatigue loading. In: 2006 International Conference on Structural Integrity and Failure (SIF2006), 27-29 Sept 2006, Sydney, Australia.

Epaarachchi, Jayantha A. and Clegg, Richard (2006) An experimental investigation of the properties of cross-ply laminate used for manufacturing of small aircraft components. Composite Structures, 75 (1-4). pp. 93-99. ISSN 0263-8223

Wang, Hao (2005) Bulk metallic glass composites. Journal of Materials Science and Technology, 21 (s1). pp. 86-90. ISSN 1005-0302

Ku, Harry S. and Van Erp, Gerard and Ball, James A. R. and Ayers, Stephen R. and Siu, Fred (2002) Shrinkage reduction of thermoset fibre composites during hardening using microwaves irradiation for curing. In: 2nd World Engineering Congress, 22-25 Jul 2002, Kuching, Malaysia.

compression

Maranan, G. B. and Manalo, A. C. (2013) Investigation on the mechanical behavior of hybrid fibre reinforced polymer composite beam. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 December 2013, Melbourne, Australia.

Manalo, Allan and Mutsuyoshi, Hiroshi and Matsui, Takahiro (2012) Testing and characterization of thick hybrid fibre composites laminates. International Journal of Mechanical Sciences , 63 (1). pp. 99-109. ISSN 0020-7403

Guades, E. J. and Sirimanna, C. S. and Aravinthan, T. and Islam, M. M. (2011) Behaviour of fibre composite pile under axial compression load. In: 21st Australasian Conference on the Mechanics of Structures and MateriaIs (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Rao, Sanjeev and Banerjee, Sourish ORCID: https://orcid.org/0000-0001-5446-5290 and Jayaraman, Krishnan and Bhattacharyya, Debes (2010) Compressive behavior of fibre reinforced honeycomb cores. In: 2008 IUTAM Symposium on Multi-Functional Material Structures and Systems, 10-12 Dec 2008, Bangalore, India.

compression and shear

Etaati, Amir and Dehghani, Kamran (2013) A study on hot deformation behavior of Ni-42.5Ti-7.5Cu alloy. Materials Chemistry and Physics, 140 (1). pp. 208-215. ISSN 0254-0584

compression failure

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

compression modulus

Zhang, Zuhua and Wang, Hao (2016) The pore characteristics of geopolymer foam concrete and their impact on the compressive strength and modulus. Frontiers in Materials, 3 (Article 38).

compression moulding

Ku, H. and Wang, H. and Pattarachaiyakoop, N. and Trada, M. (2011) A review on the tensile properties of natural fiber reinforced polymer composites. Composites Part B: Engineering, 42 (4). pp. 856-873. ISSN 1359-8368

compression stress

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

compression test

Etaati, Amir and Dehghani, Kamran and Ebrahimi, G. R. and Wang, Hao (2013) Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations. Metals and Materials International, 19 (1). pp. 5-9. ISSN 1598-9623

compression tests

Zhu, Zhengwang and Zhang, Haifeng and Wang, Hao and Ding, Bingzhe and Hu, Zhuang-Qi and Huang, Han (2009) Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting [+ Erratum]. Journal of Materials Research, 24 (10). pp. 3108-3115. ISSN 0884-2914

compressive

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2015) Compressive behaviour of low density polymeric syntactic foams. Applied Mechanics and Materials, 799-800. pp. 135-139. ISSN 1660-9336

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2013) Properties and behaviour of gomuti fibre composites under tensile and compressive load. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

compressive behaviour and modelling

Rao, Sanjeev and Banerjee, Sourish ORCID: https://orcid.org/0000-0001-5446-5290 and Jayaraman, Krishnan and Bhattacharyya, Debes (2010) Compressive behavior of fibre reinforced honeycomb cores. In: 2008 IUTAM Symposium on Multi-Functional Material Structures and Systems, 10-12 Dec 2008, Bangalore, India.

compressive elastic modulus

Zhang, Zuhua and Wang, Hao and Provis, John L. and Reid, Andrew and Li, Qiang (2013) Durability of fly ash based-geopolymers: effect of crystallization on mechanical properties. In: 8th International Symposium on Cement and Concrete (ISCC 2013), 20-23 Sep 2013, Nanjing, China.

compressive load

Dong, Jianghui and Zhuge, Yan and Mills, Julie E. and Ma, Xing (2016) Local buckling of profiled skin sheets resting on tensionless elastic foundations under uniaxial compression. Thin-Walled Structures, 103. pp. 81-89. ISSN 0263-8231

compressive properties

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2014) Compressive properties of ceramic microballoon syntactic foams. In: 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014), 26-27 Dec 2014, Khulna, Bangladesh.

Kabir, Mohammad Mazedul and Wang, Hao and Lau, Alan and Cardona, Francisco and Aravinthan, Thiru (2012) Compressive properties of chemically-treated hemp fibre reinforced composites. In: Composites Australia and CRC-ACS, 2012 Conference: Diversity in Composite, 15-16 Mar 2012, Leura, Australia.

compressive strength

Zhang, Zuhua and Wang, Hao (2016) The pore characteristics of geopolymer foam concrete and their impact on the compressive strength and modulus. Frontiers in Materials, 3 (Article 38).

Zhang, Zuhua and Provis, John L. and Zou, Jin and Reid, Andrew and Wang, Hao (2016) Toward an indexing approach to evaluate fly ashes for geopolymer manufacture. Cement and Concrete Research, 85. pp. 163-173. ISSN 0008-8846

Zhou, Wei and Yan, Chunjie and Duan, Ping and Liu, Yi and Zhang, Zuhua and Qiu, Xiumei and Li, Dan (2016) A comparative study of high- and low-Al2O3 fly ash based-geopolymers: the role of mix proportion factors and curing temperature. Materials and Design , 95. pp. 63-74. ISSN 0264-1275

Abousnina, Rajab M. and Manalo, Allan and Lokuge, Weena (2016) Physical and mechanical properties of cement mortar containing fine sand contaminated with light crude oil. Procedia Engineering, 145. 250- 258.

Abousnina, Rajab M. and Manalo, Allan and Lokuge, Weena (2015) Mechanical properties of mortar with oil contaminated sand. In: 27th Biennial National Conference of the Concrete Institute of Australia (Concrete 2015) in conjunction with the 69th RILEM Week: Construction Innovations, Research into Practice, 30 Aug - 2 Sept 2015, Melbourne, Australia.

Reed, Mark and Lokuge, Weena and Karunasena, Warna (2014) Fibre reinforced geopolymer concrete with ambient curing for in-situ applications. Journal of Materials Science, 49 (12). pp. 4297-4304. ISSN 0022-2461

Lian, C. and Zhuge, Y. and Beecham, S. (2011) Modelling pervious concrete under compression loading: a discrete element approach. Advanced Materials Research, 168-170. pp. 1590-1600. ISSN 1022-6680

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2011) Preliminary development of polymer based filler materials for GFRP tubular connector. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Lian, C. and Zhuge, Y. (2010) Optimum mix design of enhanced permeable concrete: an experimental investigation. Construction and Building Materials, 24 (12). pp. 2664-2671. ISSN 0950-0618

Zhuge, Yan (2010) Investigation of the effect of various additives on the strength of environmentally friendly permeable concrete. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2003) Triaxial test results of high-strength concrete subjected to cyclic loading. Magazine of Concrete Research, 55 (4). pp. 321-329. ISSN 0024-9831

computational modelling

Epaarachchi, Jayantha A. and Clausen, Philip D. (2005) A new cumulative fatigue damage model for glass fibre reinforced plastic composites under step/discrete loading. Composites Part A: Applied Science and Manufacturing, 36 (9). pp. 1236-1245. ISSN 1359-835X

computer simulation

Morgan, Michael J. and Fulcher, Robert and Ku, Harry S. (1999) Innovative residential schools for engineering degree courses. Quarterly Journal of Singapore Institute of Engineering Technologists, 18 (4). pp. 53-58. ISSN 1793-5059

concrete

Zhuang, Xiao Yu and Chen, Liang and Komarneni, Sridhar and Zhou, Chun Hui and Tong, Dong Shen and Yang, Hui Min and Yu, Wei Hua and Wang, Hao (2016) Fly ash-based geopolymer: clean production, properties and applications. Journal of Cleaner Production, 125. pp. 253-267. ISSN 0959-6526

Maranan, Ginghis and Manalo, Allan and Karunasena, Karu and Benmokrane, Brahim (2015) Bond stress-slip behavior: case of GFRP bars in geopolymer concrete. Journal of Materials in Civil Engineering, 27 (1). pp. 4014116-1. ISSN 0899-1561

Zhu, Huajun and Zhang, Zuhua and Zhu, Yingcan and Tian, Liang (2014) Durability of alkali-activated fly ash concrete: chloride penetration in pastes and mortars. Construction and Building Materials, 65. pp. 51-59. ISSN 0950-0618

Manalo, Allan and Benmokrane, Brahim and Park, Ki-Tae and Lutze, Darren (2014) Recent developments on FRP bars as internal reinforcement in concrete structures. Concrete in Australia, 40 (2). pp. 46-56. ISSN 1440-656X

Awad, Ziad K. and Yusaf, Talal F. (2011) Finite element analysis of fibre reinforce concrete beam subject to high temperature by using EURO-code models. Key Engineering Materials, 471-472. pp. 343-348. ISSN 1013-9826

Aravinthan, T. and Heldt, T. (2010) Innovative strengthening technique using post-tensioned fibre composite wraps for bridge headstocks. Australian Journal of Structural Engineering, 11 (2). pp. 117-128. ISSN 1328-7982

Zhang, Z. and Yao, X. and Wang, H. (2010) Thermochemistry study of the effect of alkali content on the early geopolymerisation at room temperature. In: 1st International Conference on Advances in Chemically-Activated Materials (CAM 2010), 9-12 May 2010, Jinan, China.

Aravinthan, Thiru and Heldt, Tim (2005) Strengthening of bridge headstocks with external post-tensioning: design issues and strengthening techniques. In: Road System and Engineering Technology Forum, 9-11 August 2005, Brisbane, Australia.

concrete beam

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of glued fibre composite sandwich structure in flexure: experiment and fibre model analysis. Materials and Design, 39. pp. 458-468. ISSN 0264-1275

concrete beams

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna (2010) Behaviour of structural glulam beams from sustainable fibre composite sandwich panels. In: 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference (CECAR5 and ASEC2010): Innovative Community Building, 8-12 Aug 2010, Sydney, Australia.

concrete coating

Zhang, Z. and Wang, H. (2015) Alkali-activated cements for protective coating of OPC concrete. In: Handbook of alkali-activated cements, mortars and concretes. Woodhead Publishing Series in Civil and Structural Engineering, 54. Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 605-626. ISBN 978-1-78242-276-1

concrete columns

Lokuge, Weena and Setunge, Sujeeva and Sanjayan, J. G. (2003) Modelling eccentrically loaded high-strength concrete columns. Magazine of Concrete Research, 55 (4). pp. 331-341. ISSN 0024-9831

concrete deck

Manalo, A. C. and Aravinthan, T. and Mutsuyoshi, H. and Matsui, T. (2012) Composite behaviour of a hybrid FRP bridge girder and concrete deck. Advances in Structural Engineering, 15 (4). pp. 589-600. ISSN 1369-4332

Manalo, Allan and Mutsuyoshi, Hiroshi and Aravinthan, Thiru and Matsui, Takahiro (2009) Behaviour of hybrid FRP composite I-girder with concrete deck. In: 9th International Symposium of the Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures (FRPRCS-9): Current Challenges and Future Trends, 13-15 Jul 2009, Sydney, Australia.

Mutsuyoshi, H. and Aravinthan, T. and Asamoto, S. and Manalo, A. C. and Suzukawa, K. (2007) Flexural behavior of hybrid FRP girder with concrete deck. In: APFIS 2007: 1st Asia-Pacific Conference on FRP in Structures, 12-14 Dec 2007, Hong Kong, China.

concrete face

Bajracharya, R. M. and Lokuge, W. P. and Karunasena, W. and Lau, K. T. and Mosallam, A. S. (2013) Structural evaluation of concrete expanded polystyrene sandwich panels for slab applications. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 2012): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

concrete infill

Muttashar, M. and Manalo, A. and Karunasena, W. and Lokuge, W. (2016) Experimental investigation on the flexural behaviour of pultruded GFRP beams filled with different concrete strengths. In: 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, 14-16 Dec 2016, Hong Kong, China.

concrete properties

Hussin, Manal (2012) An investigation into the effect of material composition on the fundamental properties of permeable concrete. [Thesis (PhD/Research)]

concrete reinforcements

Wang, Bo and Teng, J. G. and De Lorenzis, Laura and Zhou, Li-Min and Ou, Jinping and Jin, Wei and Lau, K. T. (2009) Strain monitoring of RC members strengthened with smart NSM FRP bars. Construction and Building Materials, 23 (4). pp. 1698-1711. ISSN 0950-0618

concrete repair

Zhu, Huajun and Zhang, Zuhua and Deng, Fenggan and Cao, Yalong (2013) The effects of phase changes on the bonding property of geopolymer to hydrated cement. Construction and Building Materials, 48. pp. 124-130. ISSN 0950-0618

concrete strength

Muttashar, Majid and Manalo, Allan and Karunasena, Warna and Lokuge, Weena (2016) Influence of infill concrete strength on the flexural behaviour of pultruded GFRP square beams. Composite Structures, 145. pp. 58-67. ISSN 0263-8223

concrete structures

Shinozaki, Hiroo and Aravinthan, Thiru and Pandey, Govinda Raj and Mutsuyoshi, Hiroshi (2007) Advancements in retrofitting reinforced concrete structures in Japan using FRP sheets. In: 23rd Biennial Conference of the Concrete Institute of Australia: Concrete for Future, 18-20 Oct 2007, Adelaide, Australia.

Lokuge, Weena P. and Sanjayan, J. G. and Setunge, Sujeeva (2005) Stress-strain model for laterally confined concrete. Journal of Materials in Civil Engineering, 17 (6). pp. 607-616. ISSN 0899-1561

confidence of tuning parameters

Kodikara, K.A. Tharindu L. and Chan, Tommy H.T. and Nguyen, Andy and Thambiratnam, David P. (2016) Model updating incorporating measured response uncertainties and confidence levels of tuning parameters. International Journal of Lifecycle Performance Engineering, 2 (1/2). pp. 61-78. ISSN 2043-8648

confinement

Lokuge, Weena and Karunasena, Warna (2016) Ductility enhancement of geopolymer concrete columns using FRP confinement. Journal of Composite Materials, 50 (14). pp. 1887-1896. ISSN 0021-9983

Lokuge, Weena and Sanjayan, Jay and Setunge, Sujeeva (2015) Use of geopolymer concrete in column applications. In: 27th Biennial National Conference of the Concrete Institute of Australia (Concrete 2015) in conjunction with the 69th RILEM Week: Construction Innovations, Research into Practice, 30 Aug-02 Sept 2015, Melbourne, Australia.

Lembo, Kurt and Lokuge, Weena and Karunasena, Warna (2014) Geopolymer concrete with FRP confinement. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 9-12 Dec 2014, Byron Bay, Australia.

Fang, Zhengping and Shang, Shuying and Wang, Hao (2013) Confinement of C60 nanoparticles on the dynamics of polystyrene studied by anelastic spectroscopy and rheometrics. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Lokuge, Weena P. and Sanjayan, J. G. and Setunge, Sujeeva (2005) Stress-strain model for laterally confined concrete. Journal of Materials in Civil Engineering, 17 (6). pp. 607-616. ISSN 0899-1561

connection

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2013) Effect of eccentricity on the behavior of pultruded FRP bolted joint. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2013) A review of FRP composite truss systems and its connection. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22): Materials to Structures: Advancement through Innovation , 11-14 Dec 2012, Sydney, Australia.

Manalo, Allan and Mutsuyoshi, Hiroshi and Aravinthan, Thiru and Matsui, Takahiro (2009) Behaviour of hybrid FRP composite I-girder with concrete deck. In: 9th International Symposium of the Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures (FRPRCS-9): Current Challenges and Future Trends, 13-15 Jul 2009, Sydney, Australia.

connections

Manalo, Allan and Mutsuyoshi, Hiroshi (2012) Behavior of fiber-reinforced composite beams with mechanical joints. Journal of Composite Materials, 46 (4). pp. 483-496. ISSN 0021-9983

connector

Sirimanna, Chamila Sampath and Islam, Md Mainul and Aravinthan, Thiru (2011) Polymer based filler materials as infill for GFRP pile connector. Key Engineering Materials, 471-472. pp. 763-768. ISSN 1013-9826

constant head

Lian, C. and Zhuge, Y. and Beecham, S. (2011) Evaluation of permeability of porous concrete. Advanced Materials Research, 295-297. pp. 873-879. ISSN 1022-6680

constant-life diagrams

Shah, Darshil U. and Schubel, Peter J. and Clifford, Mike J. and Licence, Peter (2013) Fatigue life evaluation of aligned plant fibre composites through S-N curves and constant-life diagrams. Composites Science and Technology, 74. pp. 139-149. ISSN 0266-3538

Constitutive relations

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2004) Constitutive model for confined high strength concretes subjected to cyclic loading. Journal of materials in Civil Engineering, 16 (4). pp. 297-305. ISSN 0899-1561

construction

Manalo, Allan (2013) Fibre reinforced polymer composites sandwich structure: Recent developments and applications in civil infrastructure. In: 2013 International Research Conference on Innovations in Engineering, Science and Technology (IRCIEST 2013), 27-29 Nov 2013, Batangas State University, Batangas, Philippines.

Manalo, A. C. and Karunasena, W. and Lau, K. T. (2013) Mechanical properties of bamboo fiber-polyester composites. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Aravinthan, Thiru and Manalo, Allan (2012) Field applications and case studies of FRP in civil infrastructure: the Australian experience. In: 6th International Conference on FRP Composites in Civil Engineering (CICE 2012) , 13-15 Jun 2012, Rome, Italy.

Thorpe, David and Ryan, Neal and Charles, Michael (2008) Environmental sustainability - a driver for innovation in construction SMEs? In: 3rd International Conference of the CRC for Construction Innovation: Clients Driving Innovation: Benefiting from Innovation, 12-14 March 2008, Gold Coast, Australia.

construction industries

Charles, Michael and Furneaux, Craig and Pillay, Janet and Thorpe, David and Parades Castello, Cynthya and Brown, Kerry (2007) Uptake of an OHS Code of Practice by Australian construction firms. In: CIB World Building Congress 2007: Construction for Development, 14-17 May 2007, Cape Town, South Africa.

Construction materials

Chevali, V. ORCID: https://orcid.org/0000-0002-5648-0344 and Kandare, E. (2016) Rigid biofoam composites as eco-efficient construction materials. In: Biopolymers and biotech admixtures for eco-efficient construction materials. Woodhead Publishing Series in Civil and Structural Engineering (63). Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 275-304. ISBN 978-0-08-100214-8

Zhuge, Yan (2013) A review of aerogels and their application as a multi-functional building material. Applied Mechanics and Materials, 253-255. pp. 564-567. ISSN 1660-9336

Bolt, J. R. and Zhuge, Y. and Bullen, F. (2011) Photocatalytic construction materials: an overview of recent developments and their application to permeable concrete. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

construction works

Logitharan, R. L. and Somasundaraswaran, K. and Ramanujam, J. M. (2015) Recent design strategies adapted for foamed bituminous stabilisation in flexible pavement rehabilitation works in Queensland. In: 14th Conference of the International Association for Computer Methods and Recent Advances in Geomechanics (IACMAG 2014), 22-25 Sep 2014, Kyoto, Japan.

contact angle

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

contact arc length

Xia, Zhigang and Wang, Xin and Huang, Juan and Wang, Yan and Ye, Wenxiang and Xu, Weilin (2011) A study of influence of the delivery rubber roller on yarn properties. Textile Research Journal, 81 (14). pp. 1477-1483. ISSN 0040-5175

contact mechanism

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2013) Design of newly fabricated tribological machine for wear and frictional experiments under dry/wet condition. Materials and Design, 48. pp. 2-13. ISSN 0261-3069

contaminated sand

Abousnina, Rajab M. and Manalo, Allan and Shiau, Jim ORCID: https://orcid.org/0000-0002-9220-3184 and Lokuge, Weena (2016) An overview on oil contaminated sand and its engineering applications. International Journal of GEOMATE, 10 (19). pp. 1615-1622. ISSN 2186-2982

Abousnina, Rajab M. and Shiau, Jim ORCID: https://orcid.org/0000-0002-9220-3184 and Manalo, Allan and Lokuge, Weena (2014) Effect of light hydrocarbons contamination on shear strength of fine sand. In: 4th International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2014), 19-21 Nov 2014, Brisbane, Australia.

contamination

Abousnina, Rajab M. and Manalo, Allan and Shiau, Jim ORCID: https://orcid.org/0000-0002-9220-3184 and Lokuge, Weena (2015) Effects of light crude oil contamination on the physical and mechanical properties of fine sand. Soil and Sediment Contamination, 24 (8). pp. 833-845. ISSN 1532-0383

Abousnina, Rajab M. and Manalo, Allan and Lokuge, Weena and Shiau, Jim ORCID: https://orcid.org/0000-0002-9220-3184 (2015) Oil contaminated sand: an emerging and sustainable construction material. In: 2015 International Conference on Sustainable Design, Engineering and Construction, 10-13 May 2015, Chicago, USA.

contamination and crude oil

Abousnina, Rajab M. and Manalo, Allan and Lokuge, Weena (2015) Mechanical properties of mortar with oil contaminated sand. In: 27th Biennial National Conference of the Concrete Institute of Australia (Concrete 2015) in conjunction with the 69th RILEM Week: Construction Innovations, Research into Practice, 30 Aug - 2 Sept 2015, Melbourne, Australia.

content

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2014) Compressive properties of ceramic microballoon syntactic foams. In: 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014), 26-27 Dec 2014, Khulna, Bangladesh.

context

Aldraho, Abdelnour and Kist, Alexander A. (2010) Heuristics for dynamic topologies to reduce power consumption of networks. In: Australasian Telecommunication Networks and Applications Conference (ATNAC 2010), 31 Oct-3 Nov 2010, Auckland, New Zealand.

controlled environment

Kahandawa, Gayan C. and Epaarachchi, Jayantha and Lau, K. T. and Canning, John (2013) Estimation of strain of distorted FBG sensor spectra using a fixed FBG filter circuit and an artificial neural network. In: IEEE 8th International Conference on Intelligent Sensors, Sensor Networks and Information Processing (ISSNIP 2013): Sensing the Future, 2-5 Apr 2013, Melbourne, Australia.

controlled nucleation

Wang, Hao (2005) Semisolid structure formation and semisolid casting. Journal of Materials Science and Technology, 21 (s1). pp. 65-71. ISSN 1005-0302

controlled nucleation method

Wang, Hao and Ning, Zhiliang (2007) Magnesium thixotropic structure produced by controlled nucleation method. Tezhong Zhuzao Ji Youse Hejin (Special Casting and Nonferrous Alloys) (Sp. Is). pp. 316-319. ISSN 1001-2249

conventional ovens

Trada, Mohan and Ku, Harry and Vedhar, Jayant (2009) Flexural strength of phenol formaldehyde composites post-cured in microwaves: preliminary results. Multi-Functional Materials and Structures II. pp. 1399-1402. ISSN 1022-6680

Ku, H. and Cardona, F. and Ball, J. and Jacobson, W. and Trada, M. (2008) Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study. Journal of Composite Materials, 42 (19). pp. 2083-2095. ISSN 0021-9983

convergence

Thota, N. M. and Epaarachchi, J. A. and Lau, K. T. (2013) Important aspects of finite element modeling of low density thermo plastic closed cell foams. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

Cook-Weisberg test

Dohnal, Ludek and Faigl, Paul (2007) Evaluation of the linearity of calibration dependence. In: Quality assurance of analytical results, 26-28 Mar 2007, (Beskydy), Czech Republic.

cooling rate

Ning, Zhiliang and Cao, P. and Wang, Hao and Sun, Jianfei and Liu, Diankun (2007) Effect of cooling conditions on grain size of AZ91 alloy. Journal of Materials Science and Technology, 23 (5). pp. 645-649. ISSN 1005-0302

cooperative research centres

Butcher, Peter and Thorpe, David (2007) A review of triple helix linkages in New Zealand earthquake engineering networks and comparison with the Australian cooperative research centre model. In: Triple Helix VI: 6th Biennial International Conference on University, Industry and Government Linkages, 16-18 May 2007, Singapore.

copper mould casting

Zhu, Zhengwang and Zhang, Haifeng and Wang, Hao and Ding, Bingzhe and Hu, Zhuang-Qi and Huang, Han (2009) Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting [+ Erratum]. Journal of Materials Research, 24 (10). pp. 3108-3115. ISSN 0884-2914

Liu, Weili and Zhang, H. F. and Hu, Z. Q. and Wang, Hao (2005) Formation and mechanical properties of Mg65Cu25Er10 and Mg65Cu15Ag10Er10 bulk amorphous alloys. Journal of Alloys and Compounds, 397 (1-2). pp. 202-206. ISSN 0925-8388

copper selenide

Yang, Lei and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Han, Guang and Hong, Min and Zou, Jin (2016) Impacts of Cu deficiency on the thermoelectric properties of Cu2-XSe nanoplates. Acta Materialia, 113. pp. 140-146. ISSN 1359-6454

Yang, Lei and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Han, Guang and Hong, Min and Zou, Yichao and Zou, Jin (2015) High-performance thermoelectric Cu2Se nanoplates through nanostructure engineering. Nano Energy, 16. pp. 367-374. ISSN 2211-2855

core

Omar, T. and Aravinthan, T. and Van Erp, G. (2007) The effect of core architecture on the behaviour of sandwich columns under edgewise compression loading. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

core cracking load

Islam, M. M. and Aravinthan, T. and Van Erp, G. (2009) Behaviour of innovative fibre composite sandwich panels under point loading. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009) , 9-11 Dec 2009, Seoul, Korea.

core shear

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

corona

Wang, Xin and Cao, Genyang and Xu, Weilin (2009) Improving the hydrophilic properties of wool fabrics via corona discharge and hydrogen peroxide treatment. Journal of Applied Polymer Science, 112 (4). pp. 1959-1966. ISSN 0021-8995

corona discharge

Xu, Lihua and Fang, Zhengping and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Peng, Mao (2010) Effects of corona discharge on the surface structure, morphology and properties of multi-walled carbon nanotubes. Applied Surface Science, 256 (21). pp. 6447-6453. ISSN 0169-4332

Ma, Pibo and Wang, Xin and Xu, Weilin and Cao, Genyang (2009) Application of corona discharge on desizing of polyvinyl alcohol on cotton fabrics. Journal of Applied Polymer Science, 114 (5). pp. 2887-2892. ISSN 0021-8995

corona discharges

Wang, Xin and Niu, Haitao and Lin, Tong and Wang, Xungai (2009) Needleless electrospinning of nanofibers with a conical wire coil. Polymer Engineering and Science, 49 (8). pp. 1582-1586. ISSN 0032-3888

correlation

Dohnal, Ludek and Faigl, Paul (2007) Evaluation of the linearity of calibration dependence. In: Quality assurance of analytical results, 26-28 Mar 2007, (Beskydy), Czech Republic.

correlation coefficient

Ye, Lieping and Ma, Qianli and Miao, Zhiwei and Guan, Hong and Zhuge, Yan (2013) Numerical and comparative study of earthquake intensity indices in seismic analysis. Structural Design of Tall and Special Buildings, 22 (4). pp. 362-381. ISSN 1541-7794

corroded pipelines

Sirimanna, C. S. and Manalo, A. C. and Karunasena, W. and Banerjee, S. ORCID: https://orcid.org/0000-0001-5446-5290 and McGarva, L. (2015) Fibre-reinforced polymer (FRP) repair systems for corroded steel pipelines. In: Rehabilitation of pipelines using fibre-reinforced polymer (FRP) composites. Woodhead Publishing Series in Civil and Structural Engineering (52). Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 267-285. ISBN 978-0-85709-684-5

corroded steel

Tawfik, Qaidar H. (2012) Rehabilitation of deteriorated steel truss members using CFRP. [Thesis (PhD/Research)]

corroded steel angles

Tawfik, Qaidar H. and Karunasena, Warna (Karu) and Cardona, Francisco (2012) Strengthening of corroded steel angles using CFRP. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

corrosion

Manalo, Allan and Sirimanna, Chamila and Karunasena, Warna and McGarva, Lance and Falzon, Paul (2016) Pre-impregnated carbon fibre reinforced composite system for patch repair of steel I-beams. Construction and Building Materials, 105. pp. 365-376. ISSN 0950-0618

Tawfik, Qaidar H. (2012) Rehabilitation of deteriorated steel truss members using CFRP. [Thesis (PhD/Research)]

Wang, Hao and Zhang, M. X. and Shi, Z. M. and Yang, Ke (2006) Biocorrosion behaviour of magnesium alloys under pseudo-physiological conditions. Tissue Engineering, 12 (4). p. 1067. ISSN 1076-3279

corrosion behavior

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

corrosion of steel

Cardona, Francisco and Tawfik, Qaidar H. and Karunasena, Karu (2012) Reinforcement of corroded steel structures with CFRP panels. In: ICACE 2012: International Conference on Architectural and Civil Engineering, 24-25 Oct 2012, Bali, Indonesia.

corrosion rate

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

corrosion resistance

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

cost analysis

Shah, Darshil U. and Schubel, Peter J. and Clifford, Mike J. (2013) Can flax replace E-glass in structural composites? A small wind turbine blade case study. Composites Part B: Engineering, 52. pp. 172-181. ISSN 1359-8368

cost effectiveness

Aravinthan, Thiru and Kahandawa, Gayan (2014) Investigation of full-scale fibre composite girders for replacement of hardwood timber girders in Australia. In: 7th International Conference on FRP Composites in Civil Engineering (CICE 2014), 20-22 Aug 2014, Vancouver, Canada.

cost modelling

Schubel, P. J. (2012) Cost modelling in polymer composite applications: case study – analysis of existing and automated manufacturing processes for a large wind turbine blade. Composites Part B: Engineering, 43 (3). pp. 953-960. ISSN 1359-8368

cost-effective

Nguyen, Theanh and Chan, Tommy H. T. and Thambiratnam, David P. and King, Les (2015) Development of a cost-effective and flexible vibration DAQ system for long-term continuous structural health monitoring. Mechanical Systems and Signal Processing, 64-65 (Article 3857). pp. 313-324. ISSN 0888-3270

cotton fabric

Misnon, M. I. and Bahari, S. A. and Islam, M. M. and Epaarachchi, J. A. (2013) Integration of textile fabric and coconut shell in particleboard. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

cotton fiber

Epaarachchi, J. and Ku, H. and Gohel, K. (2010) A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites. Journal of Composite Materials, 44 (6). pp. 779-788. ISSN 0021-9983

cottonised hemp fibre

Hurren, Christopher and Wang, Jing and Wood, Raymon and Li, Qing and Bibeau, Louis and Wang, Xungai (2013) Evaluation of cottonised hemp fibre produced using a new catalytic degumming system. In: 1st International Conference on Natural Fibers (ICNF 2013): Sustainable Materials for Advanced Applications, 9-11 Jun 2013, Guimaraes, Portugal .

counterface materials

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Alsofyani, I. M. and Yusaf, Talal (2010) Adhesive wear and frictional characteristics of UHMWPE and HDPE sliding against different counterfaces under dry contact condition. Tribology, 4 (2). pp. 78-85. ISSN 1751-5831

coupled phenomena

Santhikumar, S. (2009) Uncertainty on application of bi-linear approximation to tension softening material near creep rupture region. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

coupon

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2016) Characterisation of recycled mixed plastic solid wastes: coupon and full-scale investigation. Waste Management, 48. pp. 72-80. ISSN 0956-053X

coupon test

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2013) Mechanical properties characterization of the skin and core of a novel composite sandwich structure. Journal of Composite Materials, 47 (14). pp. 1785-1800. ISSN 0021-9983

coupons

Manalo, Allan and Mutsuyoshi, Hiroshi and Matsui, Takahiro (2012) Testing and characterization of thick hybrid fibre composites laminates. International Journal of Mechanical Sciences , 63 (1). pp. 99-109. ISSN 0020-7403

course development

Thorpe, David (2015) Reflections on developing and implementing an advanced engineering project management course. In: 26th Annual Conference of the Australasian Association for Engineering Education (AAEE 2015), 6-9 Dec 2015, Geelong, Victoria, Australia.

CPF resins

Cardona, Francisco and Lau, Alan Kin-Tak and Fedrigo, Jessica (2012) Novel phenolic resins with improved mechanical and toughness properties. Journal of Applied Polymer Science, 123 (4). pp. 2131-2139. ISSN 0021-8995

crack

Manalo, Allan and Sirimanna, Chamila and Karunasena, Warna and McGarva, Lance and Falzon, Paul (2016) Pre-impregnated carbon fibre reinforced composite system for patch repair of steel I-beams. Construction and Building Materials, 105. pp. 365-376. ISSN 0950-0618

Islam, Md Mainul and Kim, Ho Sung (2012) Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior. Journal of Sandwich Structures and Materials, 14 (1). pp. 111-127. ISSN 1099-6362

Islam, Md Mainul and Kim, Ho Sung (2010) Manufacturing and behaviour of sandwich composites made of starch as binder for core and adhesive between core and skins. In: 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010), 24-26 Sept 2010, Kottayam, Kerala, India.

cracked beam

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru and Luther, Stephen (2006) Shear strengthening of cracked RC beam using external post-tensioning. In: 19th Australasian Conference on the Mechanics of Structures and Materials, 29 Nov - 1 Dec 2006, Christchurch, NZ.

cracking

Chen, S. and Zhuge, Yan and Lu, G. X. and Eising, D. R. (2014) Flexural behavior of basalt fibre reinforced ferrocement composite. In: 23rd Australiasian Conference on the Mechanics of Structures and Materials (ACMSM 23), 9-12 Dec 2014, Byron Bay, Australia.

Aravinthan, Thiru and Suntharavadivel, T. G. (2007) Effects of existing shear damage on externally post tensioned repair of bent caps. Journal of Structural Engineering, 133 (11). pp. 1662-1669. ISSN 0733-9445

cracking opening angle

Goh, S. and Ku, H. and Ang, S. L. (2008) Prediction of crushing stress in composite materials. Journal of Composite Materials, 42 (5). pp. 467-484. ISSN 0021-9983

cracks

Karunasena, W. (2008) Elastodynamic reciprocity relations for wave scattering by flaws in fiber-reinforced composite plates. Journal of Mechanics of Materials and Structures, 3 (10). pp. 1831-1846. ISSN 1559-3959

Epaarachchi, J. A. (2008) Change of dynamic response of pultruded composite components used in advanced composite structures due to fatigue and fracture. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2006) Effect of existing cracks in concrete bridge members strengthened by external post-tensioning. In: FIB 2006: 2nd Congress (Federation Internationale du Beton), 5-8 Jun 2006, Naples, Italy.

Aravinthan, Thiru (2006) Is external post-tensioning an effective solution for shear strengthening of bridge elements? In: Structural Faults + Repair 2006: Eleventh International Conference on ‘Extending the Life of Bridges Concrete + Composites Buildings, Masonry + Civil Structures', 13-15 June 2006, Edinburgh, UK.

CRC

Butcher, Peter and Thorpe, David (2007) A review of triple helix linkages in New Zealand earthquake engineering networks and comparison with the Australian cooperative research centre model. In: Triple Helix VI: 6th Biennial International Conference on University, Industry and Government Linkages, 16-18 May 2007, Singapore.

credit transfer

Morgan, M. J. and Fulcher, R. L. and Ku, H. S. (1998) Articulation, credit transfer and flexible delivery of engineering degree courses: Australia, Malaysia and Hong Kong. Jurutera: Institution of Engineers Malaysia Monthly Bulletin, 1998 (1). pp. 57-67. ISSN 0126-513X

creep

Epaarachchi, J. A. (2011) The effect of viscoelasticity on fatigue behaviour of polymer matrix composites. In: Creep and fatigue in polymer matrix composites. Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 492-513. ISBN 978-1-84569-656-6

creep behavior

Tang, Xue‐Gang and Hou, Meng and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Zou, Jin and Truss, Rowan and Yang, Wei and Yang, Ming‐Bo and Zhu, Zhong-Hua and Bao, Rui‐Ying (2012) The preparation, structures, and properties of poly (vinylidene fluoride)/multiwall carbon nanotubes nanocomposites. Journal of Applied Polymer Science, 125 (S1). E592-E600. ISSN 0021-8995

creep response

Santhikumar, S. (2009) Uncertainty on application of bi-linear approximation to tension softening material near creep rupture region. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

creep ruptures

Santhikumar, S. (2009) Uncertainty on application of bi-linear approximation to tension softening material near creep rupture region. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

cricket ball

Thota, Narasimha and Epaarachchi, Jayantha and Lau, Kin Tak (2015) Evaluation of the blunt thoracic trauma caused by solid sports ball impacts. Journal of Biomechanical Science and Engineering, 10 (2).

critical length

Alsaeed, T. and Alajmi, A. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Ku, H. and Lau, Alan Kin-tak (2012) Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

cross link density

Munoz, J.-C. and Ku, H. and Cardona, F. and Rogers, D. (2008) Effects of catalysts and post-curing conditions in the polymer network of epoxy and phenolic resins: preliminary results. Journal of Materials Processing Technology, 202 (1-3). pp. 486-492. ISSN 0924-0136

cross-link density

Cardona, F. and Rogers, D. and Davey, S. and Van Erp, G. (2007) Investigation of the effect of styrene content on the ultimate curing of vinylester resins by TGA-FTIR. Journal of Composite Materials, 41 (2). pp. 137-152. ISSN 0021-9983

crosslink density

Cardona, Francisco and Lau, Alan Kin-Tak and Fedrigo, Jessica (2012) Novel phenolic resins with improved mechanical and toughness properties. Journal of Applied Polymer Science, 123 (4). pp. 2131-2139. ISSN 0021-8995

Cardona, Francisco and Aravinthan, Thiru and Fedrigo, Jessica and Moscou, Clarisse (2010) Synthesis of phenolic bio-resins for advanced composites in civil engineering structures. In: Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Cardona, F. and Aravinthan, T. and Moscou, C. (2010) Modified PF resins for composite structures with improved mechanical properties. Polymers and Polymer Composites, 18 (6). pp. 297-306. ISSN 0967-3911

Cardona, F. and Rogers, D. and Van Erp, G. (2007) Investigation by TGA-FTIR of the effect of styrene content and thickness on the UV-curing of vinylester resins. Journal of Thermoplastic Composite Materials, 20 (6). pp. 601-615. ISSN 0892-7057

crosslinker

Wang, Jing and Sutti, Alessandra and Wang, Xungai and Lin, Tong (2011) Fast responsive and morphologically robust thermo-responsive hydrogel nanofibres from poly(N-isopropylacrylamide) and POSS crosslinker. Soft Matter, 7 (9). pp. 4364-4369. ISSN 1744-683X

crude oil

Abousnina, Rajab M. and Manalo, Allan and Shiau, Jim ORCID: https://orcid.org/0000-0002-9220-3184 and Lokuge, Weena (2016) An overview on oil contaminated sand and its engineering applications. International Journal of GEOMATE, 10 (19). pp. 1615-1622. ISSN 2186-2982

Abousnina, Rajab M. and Manalo, Allan and Lokuge, Weena and Shiau, Jim ORCID: https://orcid.org/0000-0002-9220-3184 (2015) Oil contaminated sand: an emerging and sustainable construction material. In: 2015 International Conference on Sustainable Design, Engineering and Construction, 10-13 May 2015, Chicago, USA.

crushing stress

Goh, S. and Ku, H. and Ang, S. L. (2008) Prediction of crushing stress in composite materials. Journal of Composite Materials, 42 (5). pp. 467-484. ISSN 0021-9983

crystal

Niu, Yingjie and Zhou, Wei and Sunarso, Jaka and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Zhu, Zhonghua and Shao, Zongping (2010) High performance cobalt-free perovskite cathode for intermediate temperature solid oxide fuel cells. Journal of Materials Chemistry, 20 (43). pp. 9619-9622. ISSN 0959-9428

Yao, X. and Wang, H. and He, B. and Zhou, X. (2006) Numerical simulation of dendrite growth during solidification. International Journal of Nonlinear Sciences and Numerical Simulation, 7 (2). pp. 171-176. ISSN 1565-1339

crystal growth

Liao, Z. M. and Xu, H. Y. and Sun, W. and Guo, Y. N. and Yang, L. and Chen, Z. G. ORCID: https://orcid.org/0000-0002-9309-7993 and Zou, J. and Lu, Z. Y. and Chen, P. P. and Lu, W. (2012) Effects of Au catalyst on GaAs (111)B surface during annealing. In: 2012 Conference on Optoelectronic and Microelectronic Materials and Devices (COMMAD 2012), 12-14 Dec 2012, Melbourne, Australia.

crystalline insulators

Zou, Yi-Chao and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Kong, Fantai and Zhang, Enze and Drennan, John and Cho, Kyeongjae and Xiu, Faxian and Zou, Jin (2016) Surface-energy engineered Bi-doped SnTe nanoribbons with weak antilocalization effect and linear magnetoresistance. Nanoscale, 8 (46). pp. 19383-19389. ISSN 2040-3364

crystalline phase

Zhu, Zhengwang and Zhang, Haifeng and Wang, Hao and Ding, Bingzhe and Hu, Zhuang-Qi and Huang, Han (2009) Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting [+ Erratum]. Journal of Materials Research, 24 (10). pp. 3108-3115. ISSN 0884-2914

crystallization

Ma, Xue and Zhang, Zuhua and Wang, Aiguo (2016) The transition of fly ash-based geopolymer gels into ordered structures and the effect on the compressive strength. Construction and Building Materials, 104. pp. 25-33. ISSN 0950-0618

Zhu, Huajun and Zhang, Zuhua and Deng, Fenggan and Cao, Yalong (2013) The effects of phase changes on the bonding property of geopolymer to hydrated cement. Construction and Building Materials, 48. pp. 124-130. ISSN 0950-0618

crystallization behaviour

Wang, Hao and Song, Xiaoping and Yao, Xiangdong and Zhang, Haifeng and Hu, Zhuangqui (2005) Crystallization behavior of (Cu60Zr30Ti10)99Sn1 bulk metallic glass. Journal of Materials Science & Technology, 21 (s 1). pp. 51-53. ISSN 1005-0302

crystallographic

Yao, X. and Wang, H. and He, B. and Zhou, X. (2006) Numerical simulation of dendrite growth during solidification. International Journal of Nonlinear Sciences and Numerical Simulation, 7 (2). pp. 171-176. ISSN 1565-1339

CTBN

Faigl, Pavel and Rogers, David and Maurin, Romain and Van Erp, Gerard (2007) Plant based resins for fibre composites. In: 4th Annual Composites Australia and Composites CRC Conference (CRC 2007): New Technology Taking Shape, 19-20 Apr 2007, Gold Coast, Australia.

Cu based BMG

Wang, Hao and Song, Xiaoping and Yao, Xiangdong and Zhang, Haifeng and Hu, Zhuangqui (2005) Crystallization behavior of (Cu60Zr30Ti10)99Sn1 bulk metallic glass. Journal of Materials Science & Technology, 21 (s 1). pp. 51-53. ISSN 1005-0302

Cu deficiency

Yang, Lei and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Han, Guang and Hong, Min and Zou, Jin (2016) Impacts of Cu deficiency on the thermoelectric properties of Cu2-XSe nanoplates. Acta Materialia, 113. pp. 140-146. ISSN 1359-6454

Cu-based

Fu, H. M. and Zhang, H. F. and Wang, Hao and Hu, Z. Q. (2007) Multifarious fracture features of CuZrAlGd(Ag) bulk metallic glasses. Advanced Materials Research, 29-30. pp. 47-50. ISSN 1022-6680

Cu-based BMG

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2006) In-situ Cu-based bulk metallic glass composite. International Journal of Modern Physics B, 20 (25-27). pp. 3963-3968. ISSN 0217-9792

Cu/Al composite

Yu, Bao Yi and Wang, Qing and Li, Qiang and Wu, Yu Juan and Chen, Yan (2013) Interface microstructure and mechanical properties of copper/aluminum composite material. In: 3rd International Conference on Advanced Engineering Materials and Technology (AEMT 2013), 11-12 May 2013, Zhangjiajie, China.

cumulative damage

Epaarachchi, Jayantha A. (2006) A study of estimation of damage accumulation of glass fibre reinforce plastic (GFRP) composites under a block loading situation. Composite Structures, 75 (1-4). pp. 88-92. ISSN 0263-8223

Epaarachchi, Jayantha A. and Clausen, Philip D. (2005) A new cumulative fatigue damage model for glass fibre reinforced plastic composites under step/discrete loading. Composites Part A: Applied Science and Manufacturing, 36 (9). pp. 1236-1245. ISSN 1359-835X

cure

Li, Qi and Mishra, Ananta Kumar and Kim, Nam Hoon and Kuila, Tapas and Lau, Kin-tak and Lee, Joong Hee (2013) Effects of processing conditions of poly(methylmethacrylate) encapsulated liquid curing agent on the properties of self-healing composites. Composites Part B: Engineering , 49. pp. 6-15. ISSN 1359-8368

cure shrinkage

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-Tak (2014) Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts. Journal of Multifunctional Composites, 2 (1). pp. 61-66. ISSN 2168-4278

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak (2013) Cure shrinkage in epoxy grouts for grouted repairs. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

curing

Ku, H. and Prajapati, M. and Trada, M. (2012) Fracture toughness of vinyl ester composites reinforced with sawdust and postcured in microwaves. International Journal of Microwave Science and Technology, 2012 (Articl). ISSN 1687-5826

curing of polymers

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru (2012) Cure kinetic study of epoxidized hemp oil cured with a multiple catalytic system. Journal of Applied Polymer Science, 125 (S2). E511-E517. ISSN 0021-8995

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru and Cooney, Tyson (2011) Cure kinetics of an epoxidized hemp oil based bioresin system. Journal of Applied Polymer Science, 122 (1). pp. 444-451. ISSN 0021-8995

curing temperature

Yan, Hongqiang and Wang, Huaqing and Cheng, Jie and Fang, Zhengping and Wang, Hao (2015) Effect of iron acetylacetonate on the crosslink structure, thermal and flammability properties of novel aromatic diamine-based benzoxazines containing cyano group. RSC Advances, 5 (24). pp. 18538-18545.

curriculum

Khattak, Hamid and Ku, Harry and Goh, Steven (2012) Courses for teaching leadership capacity in professional engineering degrees in Australia and Europe. European Journal of Engineering Education, 37 (3). pp. 279-296. ISSN 0304-3797

cyclic loading

Peng, Youkai and Wu, Hui and Zhuge, Yan (2015) Strength and drift capacity of squat recycled concrete shear walls under cyclic loading. Engineering Structures, 100. pp. 356-368. ISSN 0141-0296

Cyclic loads

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2004) Constitutive model for confined high strength concretes subjected to cyclic loading. Journal of materials in Civil Engineering, 16 (4). pp. 297-305. ISSN 0899-1561

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2003) Triaxial test results of high-strength concrete subjected to cyclic loading. Magazine of Concrete Research, 55 (4). pp. 321-329. ISSN 0024-9831

cyclic stability

Bose, Saswata and Kim, Nam Hoon and Kuila, Tapas and Lau, Kin-tak and Lee, Joong Hee (2011) Electrochemical performance of a graphene polypyrrole nanocomposite as a supercapacitor electrode. Nanotechnology, 22 (29). p. 5202. ISSN 0957-4484

cylindrical specimens

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

damage

Anjang, A. and Chevali, V. S. ORCID: https://orcid.org/0000-0002-5648-0344 and Lattimer, B. Y. and Case, S. W. and Feih, S. and Mouritz, A. P. (2015) Post-fire mechanical properties of sandwich composite structures. Composite Structures, 132. pp. 1019-1028. ISSN 0263-8223

damage accumulation

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

damage curves

Kalendher, F. and Setunge, S. and Mohseni, H. and Lokuge, W. (2015) Deriving damage indices for concrete girder bridges subjected to flood loading. In: 6th International Conference on Structural Engineering and Construction Management (CSECM) 2015, 11-14 Dec 2015, Kandy, Sri Lanka.

damage detection

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Lau, K. T. (2013) Indexing damage using distortion of embedded FBG sensor response spectra. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

damage index

Wahalathantri, Buddhi Lankananda and Lokuge, Weena and Karunasena, Warna and Setunge, Sujeeva (2015) Vulnerability of floodways under extreme flood events. Natural Hazards Review, 17 (1). ISSN 1527-6988

damage mechanics

Epaarachchi, Jayantha A. and Clausen, Philip D. (2003) An empirical model for fatigue behavior prediction of glass fibre-reinforced plastic (GFRP) composites for various stress ratios and test frequencies. Composites Part A: Applied Science and Manufacturing, 34 (4). pp. 313-326. ISSN 1359-835X

damage severity

Wahalathantri, Buddhi Lankananda and Lokuge, Weena and Karunasena, Warna and Setunge, Sujeeva (2015) Vulnerability of floodways under extreme flood events. Natural Hazards Review, 17 (1). ISSN 1527-6988

damage tolerance

Guades, Ernesto and Aravinthan, Thiru and Manalo, Allan and Islam, Mainul (2013) Experimental investigation on the behaviour of square FRP composite tubes under repeated axial impact. Composite Structures, 97. pp. 211-221. ISSN 0263-8223

damping

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2010) Investigation of frequency characteristics of GFRP/phenolic sandwich beams. In: Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

data synchronization

Nguyen, Theanh and Chan, Tommy H. T. and Thambiratnam, David P. and King, Les (2015) Development of a cost-effective and flexible vibration DAQ system for long-term continuous structural health monitoring. Mechanical Systems and Signal Processing, 64-65 (Article 3857). pp. 313-324. ISSN 0888-3270

date palm

Aldousiri, B. and Alajmi, M. and Shalwan, A. (2013) Mechanical properties of palm fibre reinforced recycled HDPE. Advances in Materials Science and Engineering , 2013. pp. 1-7. ISSN 1687-8434

date palm fibre

Alsaeed, T. and Alajmi, A. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Ku, H. and Lau, Alan Kin-tak (2012) Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

DDA

Wang, Zhao and Zhang, Xing and Wang, Runguo and Kang, Hailan and Qiao, Bo and Ma, Jun and Zhang, Liqun and Wang, Hao (2012) Synthesis and characterization of novel soybean-oil-based elastomers with favorable processability and tunable properties. Macromolecules, 45 (22). pp. 9010-9019. ISSN 0024-9297

debonding

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2016) Influence of single and multiple skin-core debonding on free vibration characteristics of innovative GFRP sandwich panels. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 9 (5). pp. 800-804.

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2013) Dynamic behaviour of debonded GFRP composite beams. Journal of Multifunctional Composites, 1 (2). pp. 113-122. ISSN 2168-4278

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2013) Effect of skin-core debonding on the dynamic behaviour of GFRP composite beams. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Zhuge, Y. and Yeap, K. X. (2011) Assessment of debonding failure models for FRP retrofitted URM structures. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials , 7-10 Dec 2010, Melbourne, Australia.

Karunasena, Warna (2010) The effect of debonding on the natural frequencies of laminated fibre composite sandwich plates. In: 6th Australasian Congress on Applied Mechanics (ACAM 6) , 12-15 Dec 2010, Perth, Western Australia.

Karunasena, W. and Aravinthan, T. and Manalo, A. C. (2009) Vibration of debonded laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

Zhuge, Yan and Yeap, Kai (2009) Debonding characteristics of masonry structures retrofitted with FRP. In: 17th Annual International Conference on Composites or Nano Engineering ICCE17, 26 Jul-1 Aug 2009, Honolulu, Hawaii, USA.

Karunasena, Warna (Karu) and Martin, Nicole (2007) The effect of debonding on the flexural behaviour of reinforced concrete beams strengthened with fibre reinforced polymer. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

Pandey, G. R. and Mutsuyoshi, H. and Aravinthan, T. (2007) Retrofitting reinforced concrete bridge frames using externally bonded FRP sheets. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

debonds

Karunasena, W. and Jayatilake, I. and Lokuge, W. (2013) Free vibration behaviour of fibre composite sandwich beams with debonds. In: 4th International Conference on Structural Engineering and Construction Management 2013 (ICSECM 2013), 13-15 Dec 2013, Kandy, Sri Lanka.

decking

Manalo, A. and Maranan, G. and Erp, G. V. (2013) Glue-laminated composite sandwich beams for structural engineering and construction. In: 13th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC13), 11-13 Sep 2013, Sapporro, Japan.

defects

Matveev, M. Y. and Schubel, P. J. and Long, A. C. and Jones, I. A. (2016) Understanding the buckling behaviour of steered tows in automated dry fibre placement (ADFP). Composites Part A: Applied Science and Manufacturing, 90. pp. 451-456. ISSN 1359-835X

Zeng, Xuesen and Schubel, Peter and Lorrillard, Julien (2016) Modelling VARTM process induced variations on bending performance of composite Omega beams. Composites Part A, 90. pp. 371-379. ISSN 1359-835X

deflection

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 (2014) Effect of beam-column joint stiffness on the design of beams. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 9-12 Dec 2014, Byron Bay, Australia.

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2013) Smart structure for small wind turbine blade. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

deflection response

Thota, Narasimha and Epaarachchi, Jayantha and Lau, Kin Tak (2015) Evaluation of the blunt thoracic trauma caused by solid sports ball impacts. Journal of Biomechanical Science and Engineering, 10 (2).

deformation

Etaati, Amir and Dehghani, Kamran (2013) A study on hot deformation behavior of Ni-42.5Ti-7.5Cu alloy. Materials Chemistry and Physics, 140 (1). pp. 208-215. ISSN 0254-0584

deformation behaviour

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

deformation mechanism

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

deformation mechanisms

Li, Xiao-Feng and Lau, Kin-Tak and Yin, Yan-Sheng (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology, 68 (14). pp. 2876-2881. ISSN 0266-3538

degradability

Ho, Mei-Po and Lau, Kin-Tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

degradation

Bolt, J. R. and Zhuge, Y. and Bullen, F. (2014) The impact of photocatalytic on degradation of poly aromatic hydrocarbons through permeable concrete. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 23), 9-12 Dec 2014, Byron Bay, Australia.

Zulkarnain, Azwa (2014) Moisture absorption and hydrothermal aging in bamboo fibre/polyester composite. In: Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World, 7–9 Apr 2014, Newcastle, Australia.

Wang, Hao and Zhang, M. X. and Shi, Z. M. and Yang, Ke (2006) Biocorrosion behaviour of magnesium alloys under pseudo-physiological conditions. Tissue Engineering, 12 (4). p. 1067. ISSN 1076-3279

degumming

Ho, Mei-po and Wang, Hao and Lau, Kin-tak (2012) Thermal properties and structure conformation on silkworm silk fibre. In: Composites Australia and CRC-ACS, 2012 Conference: Diversity in Composite, 15-16 Mar 2012, Leura, Australia.

dehydroxylation

Zhang, Zuhua and Yao, Xiao and Zhu, Huajun and Hua, Sudong and Chen, Yue (2009) Activating process of geopolymer source material: kaolinite. Journal Wuhan University of Technology, Materials Science Edition, 24 (1). pp. 132-136. ISSN 1000-2413

delaminated composite beams

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

delamination

Kakei, Ayad and Epaarachchi, J. A. and Islam, Mainul and Leng, J. and Rajic, N. (2016) Detection and characterisation of delamination damage propagation in woven glass fibre reinforced polymer composite using thermoelastic response mapping. Composite Structures, 153. pp. 442-450. ISSN 0263-8223

Jayatilake, Indunil N. and Karunasena, Warna and Lokuge, Weena (2016) Finite element based dynamic analysis of multilayer fibre composite sandwich plates with interlayer delaminations. Advances in Aircraft and Spacecraft Science, 3 (1). pp. 15-28. ISSN 2287-528X

Zeng, Xuesen and Schubel, Peter and Lorrillard, Julien (2016) Modelling VARTM process induced variations on bending performance of composite Omega beams. Composites Part A, 90. pp. 371-379. ISSN 1359-835X

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2014) Dynamic behaviour of fibre composite multilayer sandwich plates with delaminations. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 9-12 Dec 2014, Byron Bay, Australia.

Jayatilake, Indunil N. and Karunasena, Warna and Lokuge, Weena (2014) Dynamic analysis of multilayer GFRP sandwich slabs with interlayer delaminations. In: 8th Australasian Congress on Applied Mechanics (ACAM 8), 24–28 Nov 2014, Melbourne, Australia.

Karunasena, Warna (2010) The effect of debonding on the natural frequencies of laminated fibre composite sandwich plates. In: 6th Australasian Congress on Applied Mechanics (ACAM 6) , 12-15 Dec 2010, Perth, Western Australia.

Epaarachchi, Jayantha A. and Rathnaweera, Gayan and Canning, John and Stevenson, Michael (2010) Response Fibre Bragg Grating (FBG) strain sensors embedded at different locations through the thickness around a delamination in a composite lamina. In: 7th Asian-Australasian Conference on Composites (ACCM7), 15-18 Nov 2010, Taipei, Taiwan.

Lau, Kin-Tak and Epaarachchi, Jayantha and Sudarshan, T. S. (2010) Sensors, actuators, and intelligent processing [Preface]. Materials and Manufacturing Processes, 25 (4). p. 211. ISSN 1042-6914

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

delaminations

Karunasena, W. (2008) Elastodynamic reciprocity relations for wave scattering by flaws in fiber-reinforced composite plates. Journal of Mechanics of Materials and Structures, 3 (10). pp. 1831-1846. ISSN 1559-3959

delivery rubber roller

Xia, Zhigang and Wang, Xin and Huang, Juan and Wang, Yan and Ye, Wenxiang and Xu, Weilin (2011) A study of influence of the delivery rubber roller on yarn properties. Textile Research Journal, 81 (14). pp. 1477-1483. ISSN 0040-5175

DEM

Parameswaran, Vinod and Zhang, Zhongwei ORCID: https://orcid.org/0000-0001-6622-0346 and Zhou, Hong (2014) Numerical terrain modelling for wireless underground sensor networks: a protoype for nut tree plantations. In: 8th International Conference on Sensing Technology (ICST 2014), 2-4 Sep 2014, Liverpool, United Kingdom.

dendrite

Yao, X. and Wang, H. and He, B. and Zhou, X. (2006) Numerical simulation of dendrite growth during solidification. International Journal of Nonlinear Sciences and Numerical Simulation, 7 (2). pp. 171-176. ISSN 1565-1339

deployable

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2007) Innovative all composite multi-pultrusion truss system for stressed arch deployable shelters. In: AICSGE 6: 6th Alexandria International Conference on Structural and Geotechnical Engineering, 15-17 Apr 2007, Alexandria, Egypt.

Omar, T. and Van Erp, G. and Key, P. (2007) Modular deployable composite shelters - truss system. In: ACIC 2007: Advanced Composites in Construction Conference , 2-4 Apr 2007, Bath, UK.

Omar, T. and Van Erp, G. and Key, P. W. (2006) Stressed arch modular deployable composite shelters: concept and development. In: CICE 2006: 3rd International Conference on FRP Composites in Civil Engineering, 13-15 Dec 2006, Miami, Fl, USA.

deployable shelters

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2008) M2S2 modular deployable shelter system: concept and analysis technique. In: 4th International Structural Engineering and Construction Conference (ISEC 4): Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

deployable structures

Omar, T. and Heldt, T. and Key, P. and Van Erp, G. (2005) Development of modular deployable composite shelters. In: ASEC 2005: 5th Australian Structural Engineering Conference , 11-14 Sep 2005, Newcastle, Australia.

design

Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2013) Design of newly fabricated tribological machine for wear and frictional experiments under dry/wet condition. Materials and Design, 48. pp. 2-13. ISSN 0261-3069

Alsaeed, T. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Ku, H. (2013) The potential of using date palm fibres as reinforcement for polymeric composites. Materials and Design, 43. pp. 177-184. ISSN 0264-1275

Zhuge, Yan and Brodie, Lyn and Mills, Julie (2012) The effectiveness of team project work for distance education students. In: 8th International CDIO Conference (Conceive Design Implement Operate 2012), 1-4 Jul 2012, Brisbane, Australia.

Zhuge, Y. and Mills, J. (2011) Modelling of multi-panel transmission tower retrofitted with leg reinforcement. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Awad, Z. K. and Gonzalez, F. and Aravinthan, T. (2010) Advanced robust design optimization of FRP sandwich floor panels. IOP Conference Series: Materials Science and Engineering, 10 (1). pp. 1-9. ISSN 1757-8981

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2009) Finite element analysis of fibre composite sandwich panel. In: Southern Engineering Conference, 17-18 Oct 2009, Springfield, Queensland, Australia.

design guidelines

Wahalathantri, Buddhi Lankananda and Lokuge, Weena and Karunasena, Warna and Setunge, Sujeeva (2015) Vulnerability of floodways under extreme flood events. Natural Hazards Review, 17 (1). ISSN 1527-6988

design methods

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Karu (2012) Prediction of the flexural behavior of fibre composite sandwich beams. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Ayers, Stephen R. and van Erp, Gerard (2004) A Code of Practice for the structural design of fibre composites. Proceedings of the Institution of Civil Engineers, Structures & Buildings, 157 (1). pp. 3-8. ISSN 1751-7702

design model

Zhuge, Y. (2010) FRP-retrofitted URM walls under in-plane shear: review and assessment of available models. Journal of Composites for Construction, 14 (6). pp. 743-753. ISSN 1090-0268

design optimisation

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2013) Multi-objective design optimisation of GFRP sandwich beams. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

design optimization

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2012) A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials and Design, 33 (1). pp. 534-544. ISSN 0264-1275

design principles

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of glued fibre composite sandwich structure in flexure: experiment and fibre model analysis. Materials and Design, 39. pp. 458-468. ISSN 0264-1275

design strategies

Logitharan, R. L. and Somasundaraswaran, K. and Ramanujam, J. M. (2015) Recent design strategies adapted for foamed bituminous stabilisation in flexible pavement rehabilitation works in Queensland. In: 14th Conference of the International Association for Computer Methods and Recent Advances in Geomechanics (IACMAG 2014), 22-25 Sep 2014, Kyoto, Japan.

desizing

Ma, Pibo and Wang, Xin and Xu, Weilin and Cao, Genyang (2009) Application of corona discharge on desizing of polyvinyl alcohol on cotton fabrics. Journal of Applied Polymer Science, 114 (5). pp. 2887-2892. ISSN 0021-8995

destructive testing

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Manalo, Allan (2013) Geometry and restraint effects on the bending behaviour of the glass fibre reinforced polymer sandwich slabs under point load. Materials and Design, 45. pp. 125-134. ISSN 0264-1275

detection technique

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

deterioration

Lokuge, Weena and Gamage, Nirdosha and Setunge, Sujeeva (2016) Fault tree analysis method for deterioration of timber bridges using an Australian case study. Built Environment Project and Asset, 6 (3). pp. 332-344. ISSN 2044-124X

Tawfik, Qaidar H. (2012) Rehabilitation of deteriorated steel truss members using CFRP. [Thesis (PhD/Research)]

developments

Bajracharya, Rohan M. and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2014) Glass fibre and recycled mixed plastic wastes: recent developments and applications. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 09-12 Dec 2014, Byron Bay, Australia.

Omar, T. and Heldt, T. and Key, P. and Van Erp, G. (2005) Development of modular deployable composite shelters. In: ASEC 2005: 5th Australian Structural Engineering Conference , 11-14 Sep 2005, Newcastle, Australia.

Dexamethasones

Chen, Ling and Tang, Chak Yin and Ku, Harry Siu Lung and Chen, Da Zhu and Tsui, Chi Pong (2013) Surface coating of poly-D-L-lactide/nano-hydroxyapatite composite scaffolds for dexamethasone-releasing function and wettability enhancement. In: Materials Science and Technology Conference (MS&T 2012): Next Generation Biomaterials and Surface Properties of Biomaterials , 27-31 Oct 2012, Pittsburgh, PA. United States.

diameter distributions

Wang, Xin and Niu, Haitao and Wang, Xungai and Lin, Tong (2012) Needleless electrospinning of uniform nanofibers using spiral coil spinnerets. Journal of Nanomaterials, 2012. pp. 1-9. ISSN 1687-4110

dielectric constant

Ku, Harry S. and Ball, James A. R. and Siores, Elias and Horsfield, Brendan (1999) Microwave processing and permittivity measurement of thermoplastic composites at elevated temperature. Journal of Materials Processing Technology, 89-90. pp. 419-424. ISSN 0924-0136

dielectric loss

Ku, Harry S. and Ball, James A. R. and Siores, Elias and Horsfield, Brendan (1999) Microwave processing and permittivity measurement of thermoplastic composites at elevated temperature. Journal of Materials Processing Technology, 89-90. pp. 419-424. ISSN 0924-0136

dielectric loss tangent

Ku, H. and Wong, P. and Maxwell, A. and Huang, J. and Fung, H. and Mohan, T. (2011) A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

Ku, H. and Cardona, F. and Ball, J. and Jacobson, W. and Trada, M. (2008) Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study. Journal of Composite Materials, 42 (19). pp. 2083-2095. ISSN 0021-9983

differential scanning calorimetry

Francucci, Gaston and Cardona, Francisco and Manthey, Nathan W. (2013) Cure kinetics of an acrylated epoxidized hemp oil-based bioresin system. Journal of Applied Polymer Science, 128 (3). pp. 2030-2037. ISSN 0021-8995

differential scanning calorimetry (DSC)

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru (2012) Cure kinetic study of epoxidized hemp oil cured with a multiple catalytic system. Journal of Applied Polymer Science, 125 (S2). E511-E517. ISSN 0021-8995

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru and Cooney, Tyson (2011) Cure kinetics of an epoxidized hemp oil based bioresin system. Journal of Applied Polymer Science, 122 (1). pp. 444-451. ISSN 0021-8995

Liu, Weili and Zhang, H. F. and Hu, Z. Q. and Wang, Hao (2005) Formation and mechanical properties of Mg65Cu25Er10 and Mg65Cu15Ag10Er10 bulk amorphous alloys. Journal of Alloys and Compounds, 397 (1-2). pp. 202-206. ISSN 0925-8388

differential scanning calorimetry (photo-DSC)

Cheung, Hoi-Yan and Lau, Kin-tak and Tao, Xiao-Ming and Hui, David (2008) A potential material for tissue engineering: silkworm silk/PLA biocomposite. Composites Part B: Engineering, 39 (6). pp. 1026-1033. ISSN 1359-8368

diffusion coefficient

Misnon, Mohd Iqbal and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Wang, Hao and Lau, Kin-tak (2016) Woven hemp fabric reinforced vinyl ester composite: effect of water absorption on the mechanical properties degradation. International Journal of Advances in Science, Engineering and Technology, 4 (3). pp. 96-101. ISSN 2321-8991

digital elevation model

Parameswaran, Vinod and Zhang, Zhongwei ORCID: https://orcid.org/0000-0001-6622-0346 and Zhou, Hong (2014) Numerical terrain modelling for wireless underground sensor networks: a protoype for nut tree plantations. In: 8th International Conference on Sensing Technology (ICST 2014), 2-4 Sep 2014, Liverpool, United Kingdom.

digital technologies

Banerjee, Sourish ORCID: https://orcid.org/0000-0001-5446-5290 and Karunasena, Warna and Kist, Alexander A. (2016) Challenges of teaching engineering analysis software to distance education students. In: 27th Annual Conference of the Australasian Association for Engineering Education (AAEE 2016): The Changing Role of the Engineering Educator for Developing the Future Engineer, 4‐7 Dec 2016, Coffs Harbour, Australia.

dimensional control

Islam, M. M. and Kim, H. S. (2009) An overview on manufacturing and properties of syntactic foams made of ceramic hollow microspheres and starch. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

diphenolic acid

Yan, Hongquiang and Sun, Chuang and Fang, Zhengping and Liu, Xiaoqing and Zhu, Jin and Wang, Hao (2016) Synthesis of an intrinsically flame retardant bio-based benzoxazine resin. Polymer, 97. pp. 418-427. ISSN 0032-3861

direct electrospinning

Lin, Tong and Niu, Haitao and Wang, Xin and Ali, Usman and Wang, Xungai (2011) Needleless electrospinning and direct electrospinning of nanofiber yarns. In: New Frontiers in Fiber Materials Science (AATCC 2011), 11-13 Oct 2011, Charleston, SC. United States.

direct pullout test

Maranan, Ginghis B. and Manalo, Allan C. and Karunasena, Karu and Benmokrane, Brahim (2014) Bond-slip behaviour of GFRP bars into geopolymer concrete. In: 7th International Conference on FRP Composites in Civil Engineering (CICE 2014), 20-22 Aug 2014, Vancouver, Canada.

Direct Shear Test

Zhuge, Yan and Yeap, Kai (2009) Debonding characteristics of masonry structures retrofitted with FRP. In: 17th Annual International Conference on Composites or Nano Engineering ICCE17, 26 Jul-1 Aug 2009, Honolulu, Hawaii, USA.

disaster

Lokuge, Weena and Setunge, Sujeeva and Karunasena, Warna (2014) Investigating the performance of floodway in an extreme flood event. In: 1st International Conference on Infrastructure Failures and Consequences (ICFC 2014), 16-20 Jul 2014, Melbourne, Australia .

Lokuge, Weena and Setunge, Sujeeva (2013) Evaluating disaster resilience of bridge infrastructure when exposed to extreme natural events. In: 3rd International Conference on Building Resilience: Individual, Institutional and Societal Coping Strategies to Address the Challenges Associated with Disaster Risk, 17-19 Sep 2013, Heritance Ahungalla, Sri Lanka .

disaster resilience

Lebbe, Mohamed Farook Kalendher and Lokuge, Weena and Setunge, Sujeeva and Zhang, Kevin (2014) Failure mechanisms of bridge infrastructure in an extreme flood event. In: 1st International Conference on Infrastructure Failures and Consequences (ICFC 2014), 16-20 Jul 2014, Melbourne, Australia.

discrete element modelling

Lian, C. and Zhuge, Y. and Beecham, S. (2011) Modelling pervious concrete under compression loading: a discrete element approach. Advanced Materials Research, 168-170. pp. 1590-1600. ISSN 1022-6680

disinfection

Al-Juboori, Raed and Aravinthan, Vasantha and Yusaf, Talal (2010) A review of common and alternative methods for disinfection of microorganisms in water. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

disinfection by-product

Al-Juboori, Raed and Aravinthan, Vasantha and Yusaf, Talal (2010) A review of common and alternative methods for disinfection of microorganisms in water. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

dislocation sliding

Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275

dispersion stability

Park, Ok-kyung and Kim, Nam Hoon and Lau, Kin-Tak and Lee, Joong Hee (2010) Effect of surface treatment with potassium persulfate on dispersion stability of multi-walled carbon nanotubes. Materials Letters, 64 (6). pp. 718-721. ISSN 0167-577X

dissolution

Zhang, Z. and Wang, H. and Yao, X. and Zhu, Y. (2012) Effects of halloysite in kaolin on the formation and properties of geopolymers. Cement and Concrete Composites, 34 (5). pp. 709-715. ISSN 0958-9465

distance education

Zhuge, Yan and Brodie, Lyn and Mills, Julie (2012) The effectiveness of team project work for distance education students. In: 8th International CDIO Conference (Conceive Design Implement Operate 2012), 1-4 Jul 2012, Brisbane, Australia.

distance students

Manalo, Allan and Aravinthan, Thiru (2012) Peer assisted learning in an online postgraduate course on engineered fibre composites. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

distortion

Peauril, J. and Epaarachchi, J. and Lau, K. T. and Wang, H. (2013) Embedded fibre optic sensors under multi-axial loading: a pilot study. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

distributed DAQ

Nguyen, Theanh and Chan, Tommy H. T. and Thambiratnam, David P. and King, Les (2015) Development of a cost-effective and flexible vibration DAQ system for long-term continuous structural health monitoring. Mechanical Systems and Signal Processing, 64-65 (Article 3857). pp. 313-324. ISSN 0888-3270

distributed sensing

Parameswaran, Vinod and Zhang, Zhongwei ORCID: https://orcid.org/0000-0001-6622-0346 and Zhou, Hong (2014) Numerical terrain modelling for wireless underground sensor networks: a protoype for nut tree plantations. In: 8th International Conference on Sensing Technology (ICST 2014), 2-4 Sep 2014, Liverpool, United Kingdom.

distribution method

Ku, H. and Fulcher, R. (2012) Using computer software packages to enhance the teaching in engineering management science: part 2 - programming techniques. Computer Applications in Engineering Education, 20 ( 1). pp. 114-123. ISSN 1099-0542

dominant frequency

Choy, Y. S. and Liu, Y. and Cheung, H. Y. and Xi, Q. and Lau, K. T. (2012) Development of composite plate for compact silencer design. Journal of Sound and Vibration, 331 (10). pp. 2348-2364. ISSN 0022-460X

double-strap shear

Manalo, Allan and Sirimanna, Chamila and Karunasena, Warna and McGarva, Lance and Falzon, Paul (2016) Pre-impregnated carbon fibre reinforced composite system for patch repair of steel I-beams. Construction and Building Materials, 105. pp. 365-376. ISSN 0950-0618

dough

Islam, Md Mainul and Kim, Ho Sung (2007) Manufacture of syntactic foams: pre-mold processing. Materials and Manufacturing Processes, 22 (1). pp. 28-36. ISSN 1042-6914

down powder

Xu, Weilin and Wang, Xin and Cui, Weigang and Peng, Xuqiang and Li, Wenbin and Liu, Xin (2009) Characterization of superfine down powder. Journal of Applied Polymer Science, 111 (5). pp. 2204-2209. ISSN 0021-8995

drift capacity

Peng, Youkai and Wu, Hui and Zhuge, Yan (2015) Strength and drift capacity of squat recycled concrete shear walls under cyclic loading. Engineering Structures, 100. pp. 356-368. ISSN 0141-0296

drilling process

Alsaeed, T. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2014) Machinability of glass/date palm fibre epoxy composites. International Journal of Machining and Machinability of Materials, 16 (2). pp. 129-150. ISSN 1748-5711

driveability

Guades, Ernesto and Aravinthan, Thiru and Islam, Mainul and Manalo, Allan (2012) A review on the driving performance of FRP composite piles. Composite Structures, 94 (6). pp. 1932-1942. ISSN 0263-8223

Guades, E. J. and Aravinthan, T. and Islam, M. M. (2010) An overview on the application of FRP composites in piling system. In: Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

drop weight impact strength

Ku, H. and Trada, M. and Puttgunta, V. C. (2007) Mechanical properties of vinyl ester composites cured by microwave irradiation: pilot study. Key Engineering Materials, 334-33. pp. 537-540. ISSN 1013-9826

drop-weight test

Guades, Ernesto J. and Aravinthan, Thiru and Islam, Md. Mainul and Manalo, Allan C. (2012) Stiffness of FRP pultruded tubes under repeated axial impacts. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

dry adhesive wear

Alotaibi, J. G. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Yusaf, T. F. (2015) Brass, aluminium, and mild steel sliding against stainless steel under dry conditions. International Journal of Precision Technology, 5 (2). pp. 85-96. ISSN 1755-2060

drying shrinkage

Yang, Tao and Yao, Xiao and Zhang, Zuhua (2014) Geopolymer prepared with high-magnesium nickel slag: characterization of properties and microstructure. Construction and Building Materials, 59. pp. 188-194. ISSN 0950-0618

DSC

Xu, Weilin and Wang, Xin and Cui, Weigang and Peng, Xuqiang and Li, Wenbin and Liu, Xin (2009) Characterization of superfine down powder. Journal of Applied Polymer Science, 111 (5). pp. 2204-2209. ISSN 0021-8995

ductility

Lokuge, Weena and Karunasena, Warna (2016) Ductility enhancement of geopolymer concrete columns using FRP confinement. Journal of Composite Materials, 50 (14). pp. 1887-1896. ISSN 0021-9983

Lembo, Kurt and Lokuge, Weena and Karunasena, Warna (2014) Geopolymer concrete with FRP confinement. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 9-12 Dec 2014, Byron Bay, Australia.

Reed, Mark and Lokuge, Weena and Karunasena, Warna (2014) Fibre reinforced geopolymer concrete with ambient curing for in-situ applications. Journal of Materials Science, 49 (12). pp. 4297-4304. ISSN 0022-2461

Fu, H. M. and Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2006) In situ TiB-reinforced cu-based bulk metallic glass composites. Scripta Materialia, 54 (11). pp. 1961-1966. ISSN 1359-6462

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2006) In-situ Cu-based bulk metallic glass composite. International Journal of Modern Physics B, 20 (25-27). pp. 3963-3968. ISSN 0217-9792

Fu, H. M. and Zhang, H. F. and Wang, Hao and Zhang, Qingsheng and Hu, Z. Q. (2005) Synthesis and mechanical properties of Cu-based bulk metallic glass composites containing in-situ TiC particles. Scripta Materialia, 52 (7). pp. 669-673. ISSN 1359-6462

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2004) Constitutive model for confined high strength concretes subjected to cyclic loading. Journal of materials in Civil Engineering, 16 (4). pp. 297-305. ISSN 0899-1561

durability

Zhang, Z. H. and Zhu, H. J. and Zhou, C. H. and Wang, H. (2016) Geopolymer from Kaolin in China: an overview. Applied Clay Science, 119 (1). pp. 31-41. ISSN 0169-1317

Ma, Xue and Zhang, Zuhua and Wang, Aiguo (2016) The transition of fly ash-based geopolymer gels into ordered structures and the effect on the compressive strength. Construction and Building Materials, 104. pp. 25-33. ISSN 0950-0618

Zhang, Z. and Wang, H. (2015) Alkali-activated cements for protective coating of OPC concrete. In: Handbook of alkali-activated cements, mortars and concretes. Woodhead Publishing Series in Civil and Structural Engineering, 54. Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 605-626. ISBN 978-1-78242-276-1

Zhang, Z. and Wang, H. (2015) Analysing the relation between pore structure and permeability of alkali-activated concrete binders. In: Handbook of alkali-activated cements, mortars and concretes. Woodhead Publishing Series in Civil and Structural Engineering, 54. Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 235-264. ISBN 978-1-78242-276-1

Yang, Tao and Yao, Xiao and Zhang, Zuhua (2014) Quantification of chloride diffusion in fly ash-slag-based geopolymers by X-ray fluorescence (XRF). Construction and Building Materials, 69. pp. 109-115. ISSN 0950-0618

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2014) An overview of mechanical properties and durability of glass-fibre reinforced recycled mixed plastic waste composites. Materials and Design, 62. pp. 98-112. ISSN 0264-1275

Zhang, Zuhua and Provis, John L. and Reid, Andrew and Wang, Hao (2014) Fly ash-based geopolymers: the relationship between composition, pore structure and efflorescence. Cement and Concrete Research, 64. pp. 30-41. ISSN 0008-8846

Zhu, Huajun and Zhang, Zuhua and Zhu, Yingcan and Tian, Liang (2014) Durability of alkali-activated fly ash concrete: chloride penetration in pastes and mortars. Construction and Building Materials, 65. pp. 51-59. ISSN 0950-0618

Zhang, Zuhua and Wang, Hao and Provis, John L. and Reid, Andrew and Li, Qiang (2013) Durability of fly ash based-geopolymers: effect of crystallization on mechanical properties. In: 8th International Symposium on Cement and Concrete (ISCC 2013), 20-23 Sep 2013, Nanjing, China.

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2011) Temperature effects on full scale FRP bridge using innovative composite components. In: 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), 27-29 Sep 2010, Beijing, China.

Guades, E. J. and Aravinthan, T. and Islam, M. M. (2010) An overview on the application of FRP composites in piling system. In: Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

dyeing

Wang, Xin and Xu, Weilin and Cui, Weigang and Li, Wenbin and Wang, Xungai (2008) Bleaching and dyeing of superfine wool powder/polypropylene blend film. Research Journal of Textile and Apparel, 12 (4). pp. 12-20. ISSN 1560-6074

dynamic

Li, Wenbin and Jiang, Peiqing and Wang, Xin and Li, Gaowen and Xu, Weilin (2013) Experimental investigation on the surface humidity of fabric during the process of dynamic moisture liberation. International Journal of Clothing Science and Technology, 25 (6). pp. 451-456. ISSN 0955-6222

dynamic analysis

Jayatilake, Indunil N. and Karunasena, Warna and Lokuge, Weena (2016) Finite element based dynamic analysis of multilayer fibre composite sandwich plates with interlayer delaminations. Advances in Aircraft and Spacecraft Science, 3 (1). pp. 15-28. ISSN 2287-528X

Jayatilake, Indunil N. and Karunasena, Warna and Lokuge, Weena (2014) Dynamic analysis of multilayer GFRP sandwich slabs with interlayer delaminations. In: 8th Australasian Congress on Applied Mechanics (ACAM 8), 24–28 Nov 2014, Melbourne, Australia.

dynamic behavior

Karunasena, W. and Jayatilake, I. and Lokuge, W. (2013) Free vibration behaviour of fibre composite sandwich beams with debonds. In: 4th International Conference on Structural Engineering and Construction Management 2013 (ICSECM 2013), 13-15 Dec 2013, Kandy, Sri Lanka.

dynamic behaviour

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2014) Dynamic behaviour of fibre composite multilayer sandwich plates with delaminations. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 9-12 Dec 2014, Byron Bay, Australia.

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2013) Dynamic behaviour of debonded GFRP composite beams. Journal of Multifunctional Composites, 1 (2). pp. 113-122. ISSN 2168-4278

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2013) Effect of skin-core debonding on the dynamic behaviour of GFRP composite beams. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

dynamic fracture mechanics

Wu, L. and Liu, P. and Shi, C. and Zhang, Z. and Bui, Tinh Quoc and Jiao, D. (2016) Edge-based smoothed extended finite element method for dynamic fracture analysis. Applied Mathematical Modelling, 40 (19-20). pp. 8564-8579. ISSN 0307-904X

dynamic mechanical analysis

Francucci, G. and Manthey, N. W. and Cardona, F. and Aravinthan, T. (2014) Processing and characterization of 100% hemp-based biocomposites obtained by vacuum infusion. Journal of Composite Materials, 48 (11). pp. 1323-1335. ISSN 0021-9983

Manthey, Nathan W. and Cardona, Francisco and Francucci, Gaston and Aravinthan, Thiru (2013) Thermo-mechanical properties of epoxidized hemp oil-based bioresins and biocomposites. Journal of Reinforced Plastics and Composites , 32 (19). pp. 1444-1456. ISSN 0731-6844

Ho, Mei-po and Wang, Hao and Ho, Chun-kit and Lau, Kin-tak (2012) A study on the dynamic mechanical properties of silk fibre composites. Advanced Materials Research, 410. pp. 106-109. ISSN 1022-6680

dynamic mechanical analysis (DMTA)

Cheung, Hoi-Yan and Lau, Kin-tak and Tao, Xiao-Ming and Hui, David (2008) A potential material for tissue engineering: silkworm silk/PLA biocomposite. Composites Part B: Engineering, 39 (6). pp. 1026-1033. ISSN 1359-8368

Dynamic mechanical properties

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Aravinthan, Thiru and Van Erp, Gerard (2015) Thermo-mechanical behaviour of epoxy based polymer matrix. In: 27th Biennial National Conference of the Concrete Institute of Australia (Concrete 2015) in conjunction with the 69th RILEM Week: Construction Innovations, Research into Practice, 30 Aug – 2 Sept 2015, Melbourne, Australia.

Zhao, Yong-Qing and Cheung, Hoi-Yan and Lau, Kin-Tak and Xu, Cai-Ling and Zhao, Dan-Dan and Li, Hu-Lin (2010) Silkworm silk/poly(lactic acid) biocomposites: dynamic mechanical, thermal and biodegradable properties. Polymer Degradation and Stability, 95 (10). pp. 1978-1987. ISSN 0141-3910

dynamic mechanical property

Ho, Mei-po and Wang, Hao and Ho, Chun-kit and Lau, Kin-tak (2012) A study on the dynamic mechanical properties of silk fibre composites. Advanced Materials Research, 410. pp. 106-109. ISSN 1022-6680

dynamic mechanical thermal analysis

Ku, H. and Cardona, F. and Rogers, D. and Munoz, J.-C. (2010) Development of polymer network of phenolic and epoxies resins mixed with linseed oil: pilot study. Journal of Materials Engineering and Performance, 19 (6). pp. 912-919. ISSN 1059-9495

dynamic mechanical thermal analysis (DMTA)

Ku, H. and Maxwell, A. and Wong, P. and Huang, J. and Fung, H. (2011) Relationship between electrical and mechanical loss tangents of hollow glass powder reinforced epoxy composites: a pilot study. Journal of Applied Polymer Science , 119 (5). pp. 2945-2952. ISSN 0021-8995

dynamic stress

Lau, Sindy Mei-Ling and Lau, Kin-Tak and Yin, Yan-Sheng and Li, Lan and Wong, May and Chan, Kevin and Chen, William (2010) A shape memory alloy energy absorber for backpack design. Materials and Manufacturing Processes, 25 (4). pp. 281-286. ISSN 1042-6914

dynamic stress intensity factor

Wu, L. and Liu, P. and Shi, C. and Zhang, Z. and Bui, Tinh Quoc and Jiao, D. (2016) Edge-based smoothed extended finite element method for dynamic fracture analysis. Applied Mathematical Modelling, 40 (19-20). pp. 8564-8579. ISSN 0307-904X

dynamic tester

Li, Wenbin and Xu, Weilin and Wang, Hao and Wang, Xin (2016) A dynamic tester to evaluate the thermal and moisture behaviour of the surface of textiles. Journal of Thermal Biology, 55. pp. 14-19. ISSN 0306-4565

earthquake

Butcher, Peter and Thorpe, David (2007) A review of triple helix linkages in New Zealand earthquake engineering networks and comparison with the Australian cooperative research centre model. In: Triple Helix VI: 6th Biennial International Conference on University, Industry and Government Linkages, 16-18 May 2007, Singapore.

earthquake intensity index

Ye, Lieping and Ma, Qianli and Miao, Zhiwei and Guan, Hong and Zhuge, Yan (2013) Numerical and comparative study of earthquake intensity indices in seismic analysis. Structural Design of Tall and Special Buildings, 22 (4). pp. 362-381. ISSN 1541-7794

earthquakes

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2003) Triaxial test results of high-strength concrete subjected to cyclic loading. Magazine of Concrete Research, 55 (4). pp. 321-329. ISSN 0024-9831

ECC

Zhuge, Yan and Shen, C. J. and Lu, G.X. and Hesse, G. and Chen, S. and Ruan, D. (2014) Material properties and impact resistance of a new lightweight engineered cementitious composite. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 23), 9-12 Dec 2014, Byron Bay, Australia.

eccentricity

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2013) Effect of eccentricity on the behavior of pultruded FRP bolted joint. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Islam, Md Mainul and Aravinthan, Thiru and Williams, Paul Garreth (2012) Behaviour of pultruded FRP hollow sections under eccentric loading. In: 6th International Conference on FRP Composites in Civil Engineering (CICE 2012), 13-15 Jun 2012, Rome, Italy.

edgewise

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2013) Shear behaviour of glued structural fibre composite sandwich beams. Construction and Building Materials, 47. pp. 1317-1327. ISSN 0950-0618

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of full-scale railway turnout sleepers from glue-laminated fibre composite sandwich structures. Journal of Composites for Construction, 16 (6). pp. 724-736. ISSN 1090-0268

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) Flexural behaviour of glue-laminated fibre composite sandwich beams. Composite Structures, 92 (11). pp. 2703-2711. ISSN 0263-8223

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) In-plane shear behaviour of fibre composite sandwich beams using asymmetrical beam shear test. Construction and Building Materials, 24 (10). pp. 1952-1960. ISSN 0950-0618

Manalo, A. C. and Aravinthan, T. and Karunasena, W. and Islam, M. M. (2010) Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions. Composite Structures, 92 (4). 984-995 . ISSN 0263-8223

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2009) Flexural behaviour of laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Islam, Mainul (2009) Flexural behaviour of composite sandwiches for structural applications. In: Proceedings of the 9th International Symposium on Fibre Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-9): Current Challenges and Future Trends, 13-15 Jul 2009, Sydney, Australia.

effect

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2011) Temperature effects on full scale FRP bridge using innovative composite components. In: 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), 27-29 Sep 2010, Beijing, China.

effect of catalyst

Liao, Z. M. and Xu, H. Y. and Sun, W. and Guo, Y. N. and Yang, L. and Chen, Z. G. ORCID: https://orcid.org/0000-0002-9309-7993 and Zou, J. and Lu, Z. Y. and Chen, P. P. and Lu, W. (2012) Effects of Au catalyst on GaAs (111)B surface during annealing. In: 2012 Conference on Optoelectronic and Microelectronic Materials and Devices (COMMAD 2012), 12-14 Dec 2012, Melbourne, Australia.

effect of design parameters

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Aravinthan, Thiru (2016) Bond behaviour of composite sandwich panel and epoxy polymer matrix. In: 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2016), 14 - 16 Dec 2016, Hong Kong, CHina.

Effective bond

Maranan, G. and Manalo, A. C. and Benmokrane, B. and Karunasena, W. and Mendis, P. (2015) Evaluation of the flexural strength and serviceability of geopolymer concrete beams reinforced with glass-fibre-reinforced polymer (GFRP) bars. Engineering Structures, 101. pp. 529-541. ISSN 0141-0296

effective heat conductivity

Li, Qiang and Wang, Hao and Zhang, Zuhua and Reid, Andrew (2013) Numerical simulation of porosity on thermal properties and fire resistance of foamed concrete. Journal of Sustainable Cement-Based Materials, 2 (1). pp. 13-19. ISSN 2165-0373

Li, Qiang and Wang, Hao and Bullen, Frank and Reid, Andrew (2012) Numerical simulation of porous structure in foam concrete on thermal insulation property. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

effective length

Zhuge, Yan and Yeap, Kai (2009) Debonding characteristics of masonry structures retrofitted with FRP. In: 17th Annual International Conference on Composites or Nano Engineering ICCE17, 26 Jul-1 Aug 2009, Honolulu, Hawaii, USA.

effective specific heat

Li, Qiang and Wang, Hao and Zhang, Zuhua and Reid, Andrew (2013) Numerical simulation of porosity on thermal properties and fire resistance of foamed concrete. Journal of Sustainable Cement-Based Materials, 2 (1). pp. 13-19. ISSN 2165-0373

Li, Qiang and Wang, Hao and Bullen, Frank and Reid, Andrew (2012) Numerical simulation of porous structure in foam concrete on thermal insulation property. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

efflorescence

Yao, Xiao and Yang, Tao and Zhang, Zuhua (2016) Compressive strength development and shrinkage of alkali-activated fly ash–slag blends associated with efflorescence. Materials and Structures, 49 (7). pp. 2907-2918. ISSN 1359-5997

Zhang, Z. H. and Zhu, H. J. and Zhou, C. H. and Wang, H. (2016) Geopolymer from Kaolin in China: an overview. Applied Clay Science, 119 (1). pp. 31-41. ISSN 0169-1317

Ma, Xue and Zhang, Zuhua and Wang, Aiguo (2016) The transition of fly ash-based geopolymer gels into ordered structures and the effect on the compressive strength. Construction and Building Materials, 104. pp. 25-33. ISSN 0950-0618

Zhang, Zuhua and Provis, John L. and Reid, Andrew and Wang, Hao (2014) Geopolymer foam concrete: an emerging material for sustainable construction. Construction and Building Materials, 56. pp. 113-127. ISSN 0950-0618

Zhang, Zuhua and Wang, Hao and Provis, John L. and Reid, Andrew (2013) Efflorescence: a critical challenge for geopolymer applications? In: Concrete Institute of Australia's Biennial National Conference (Concrete 2013): Understanding Concrete, 16-18 Oct 2013, Gold Coast, Australia.

EHO

Manthey, Nathan William (2013) Development of hemp oil based bioresins for biocomposites. [Thesis (PhD/Research)]

elastic modulus

Lau, Mei-ling and Lau, Kin-tak and Ku, Harry and Bahattacharyya, Debes and Lee, Joong-Hee (2012) Assessing heat-treatment effects on bovine cortical bones by nanoindentation. Processing and Fabrication of Advanced Materials. pp. 110-113. ISSN 1022-6680

elastic properties

Muttashar, Majid and Karunasena, Warna and Manalo, Allan and Lokuge, Weena (2016) Behaviour of hollow pultruded GFRP square beams with different shear span-to-depth ratios. Journal of Composite Materials, 50 (21). pp. 2925-2940. ISSN 0021-9983

Muttashar, Majid and Karunasena, Warna and Manalo, Allan and Lokuge, Weena (2015) Testing and characterization of pultruded glass fiber reinforced polymer (GFRP) beams. In: Joint Conference of the 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & the 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015), 14-16 Dec 2015, Nanjing, China.

Lau, Sindy Mei-Ling and Lau, Kin-Tak and Yin, Yan-Sheng and Li, Lan and Wong, May and Chan, Kevin and Chen, William (2010) A shape memory alloy energy absorber for backpack design. Materials and Manufacturing Processes, 25 (4). pp. 281-286. ISSN 1042-6914

elastomers

Wang, Zhao and Zhang, Xing and Wang, Runguo and Kang, Hailan and Qiao, Bo and Ma, Jun and Zhang, Liqun and Wang, Hao (2012) Synthesis and characterization of novel soybean-oil-based elastomers with favorable processability and tunable properties. Macromolecules, 45 (22). pp. 9010-9019. ISSN 0024-9297

electric field analysis

Wang, Xin and Lin, Tong and Wang, Xungai (2014) Scaling up the production rate of nanofibers by needleless electrospinning from multiple ring. Fibers and Polymers, 15 (5). pp. 961-965. ISSN 1229-9197

electric field intensities

Wang, Xin and Niu, Haitao and Lin, Tong and Wang, Xungai (2009) Needleless electrospinning of nanofibers with a conical wire coil. Polymer Engineering and Science, 49 (8). pp. 1582-1586. ISSN 0032-3888

electric field intensity

Wang, Xin and Wang, Xungai and Lin, Tong (2012) Electric field analysis of spinneret design for needleless electrospinning of nanofibers. Journal of Materials Research, 27 (23). pp. 3013-3019. ISSN 0884-2914

electric fields

Liu, Liwi and Liu, Yanju and Leng, Jinsong and Lau, Kin-tak (2011) Electromechanical stability of compressible dielectric elastomer actuators. Smart Materials and Structures, 20 (11). p. 115015. ISSN 0964-1726

electric voltage

Wang, Xin and Niu, Haitao and Lin, Tong and Wang, Xungai (2009) Needleless electrospinning of nanofibers with a conical wire coil. Polymer Engineering and Science, 49 (8). pp. 1582-1586. ISSN 0032-3888

electrical conductivity

Chipara, Mircea and Brittain, Wiliam J. and Lau, Kin-Tak and Chipara, Magdalena Dorina (2008) Polycarbonate-carbon nanofibers composites: an electron spin resonance study. Polymers and Polymer Composites , 16 (8). pp. 519-526. ISSN 0967-3911

electrical loss tangent

Ku, H. and Trada, M. and Tai, P. (2013) Dielectric properties of sawdust reinforced epoxy composites post-cured in microwaves. Journal of Reinforced Plastics and Composites, 32 (10). pp. 765-774. ISSN 0731-6844

electrical losses

Ku, H. and Cardona, F. and Ball, J. and Jacobson, W. and Trada, M. (2008) Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study. Journal of Composite Materials, 42 (19). pp. 2083-2095. ISSN 0021-9983

electrical properties

Ku, H. and Maxwell, A. and Wong, P. and Huang, J. and Fung, H. (2011) Relationship between electrical and mechanical loss tangents of hollow glass powder reinforced epoxy composites: a pilot study. Journal of Applied Polymer Science , 119 (5). pp. 2945-2952. ISSN 0021-8995

Ji, Xiaoyong and Li, Hui and Hui, David and Hsiao, Kuang-Ting and Ou, Jinping and Lau, Alan K. T. (2010) I-V characteristics and electro-mechanical response of different carbon black/epoxy composites. Composites Part B: Engineering, 41 (1). pp. 25-32. ISSN 1359-8368

Cui, Weigang and Wang, Xin and Li, Wenbin and Xu, Weilin (2009) Dynamic analysis on the thermal and electrical properties of fabrics in the process of moisture absorption and liberation. International Journal of Clothing Science and Technology, 21 (5). pp. 279-285. ISSN 0955-6222

electrochemical corrosion

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

electrochemical impedance spectroscopy

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

electrochemical performance

Bose, Saswata and Kim, Nam Hoon and Kuila, Tapas and Lau, Kin-tak and Lee, Joong Hee (2011) Electrochemical performance of a graphene polypyrrole nanocomposite as a supercapacitor electrode. Nanotechnology, 22 (29). p. 5202. ISSN 0957-4484

electrochemical properties

Niu, Yingjie and Zhou, Wei and Sunarso, Jaka and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Zhu, Zhonghua and Shao, Zongping (2010) High performance cobalt-free perovskite cathode for intermediate temperature solid oxide fuel cells. Journal of Materials Chemistry, 20 (43). pp. 9619-9622. ISSN 0959-9428

electrochemistry

Zhou, Wei and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Liang, Fengli and Xu, Hong-Yi and Motuzas, Julius and Julbe, Anne and Zhu, Zhonghua (2011) Amorphous iron oxide decorated 3D heterostructured electrode for highly efficient oxygen reduction. Chemistry of Materials, 23 (18). pp. 4193-4198. ISSN 0897-4756

electrolyte

Niu, Yingjie and Zhou, Wei and Sunarso, Jaka and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Zhu, Zhonghua and Shao, Zongping (2010) High performance cobalt-free perovskite cathode for intermediate temperature solid oxide fuel cells. Journal of Materials Chemistry, 20 (43). pp. 9619-9622. ISSN 0959-9428

electromechanical coupling

Liu, Liwi and Liu, Yanju and Leng, Jinsong and Lau, Kin-tak (2011) Electromechanical stability of compressible dielectric elastomer actuators. Smart Materials and Structures, 20 (11). p. 115015. ISSN 0964-1726

electromechanical devices

Liu, Liwi and Liu, Yanju and Leng, Jinsong and Lau, Kin-tak (2011) Electromechanical stability of compressible dielectric elastomer actuators. Smart Materials and Structures, 20 (11). p. 115015. ISSN 0964-1726

electron microscopy

Ku, H. and Yap, Y. S. and Lee, T. S. and Trada, M. (2012) Tensile properties of phenol-formaldehyde nanoclay reinforced composites: a pilot study. Journal of Applied Polymer Science, 126 (s2). E142-E150. ISSN 0021-8995

Ji, Xiaoyong and Li, Hui and Hui, David and Hsiao, Kuang-Ting and Ou, Jinping and Lau, Alan K. T. (2010) I-V characteristics and electro-mechanical response of different carbon black/epoxy composites. Composites Part B: Engineering, 41 (1). pp. 25-32. ISSN 1359-8368

electron spin resonance

Chipara, Mircea and Brittain, Wiliam J. and Lau, Kin-Tak and Chipara, Magdalena Dorina (2008) Polycarbonate-carbon nanofibers composites: an electron spin resonance study. Polymers and Polymer Composites , 16 (8). pp. 519-526. ISSN 0967-3911

electron transfer

Bose, Saswata and Kim, Nam Hoon and Kuila, Tapas and Lau, Kin-tak and Lee, Joong Hee (2011) Electrochemical performance of a graphene polypyrrole nanocomposite as a supercapacitor electrode. Nanotechnology, 22 (29). p. 5202. ISSN 0957-4484

electrospinning

Wang, Jing and Hurren, Christopher and Sutti, Alessandra and Lin, Tong and Wang, Xungai (2013) Thermo-responsive PNIPAM nanofibres crosslinked by OpePOSS. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

electrospinning process

Wang, Xin and Niu, Haitao and Wang, Xungai and Lin, Tong (2012) Needleless electrospinning of uniform nanofibers using spiral coil spinnerets. Journal of Nanomaterials, 2012. pp. 1-9. ISSN 1687-4110

electrospinning setups

Wang, Jing and Sutti, Alessandra and Wang, Xungai and Lin, Tong (2012) A new way to nanostructure hydrogels: electrospun thermo-responsive islands-in-the-sea nanofibres. In: 5th Materials Research Society Fall Meeting (MRS 2011), 28 Nov-2 Dec 2011, Boston, MA. United States.

electrospinning techniques

Wang, Xin and Niu, Haitao and Wang, Xungai and Lin, Tong (2012) Needleless electrospinning of uniform nanofibers using spiral coil spinnerets. Journal of Nanomaterials, 2012. pp. 1-9. ISSN 1687-4110

electrospuns

Wang, Jing and Sutti, Alessandra and Wang, Xungai and Lin, Tong (2012) A new way to nanostructure hydrogels: electrospun thermo-responsive islands-in-the-sea nanofibres. In: 5th Materials Research Society Fall Meeting (MRS 2011), 28 Nov-2 Dec 2011, Boston, MA. United States.

elevated in-service temperature

Manalo, Allan and Surendar, Swetha and van Erp, Gerard and Benmokrane, Brahim (2016) Flexural behavior of an FRP sandwich system with glass-fiber skins and a phenolic core at elevated in-service temperature. Composite Structures, 152. pp. 96-105. ISSN 0263-8223

elevated temperature

Manalo, Allan C. and Wani, Evans and Zulkarnain, Noor Azwa and Karunasena, Warna and Lau, Kin-tak (2015) Effects of alkali treatment and elevated temperature on the mechanical properties of bamboo fibre-polyester composites. Composites Part B: Engineering, 80 (1). pp. 73-83. ISSN 1359-8368

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2014) Effect of elevated temperature on the tensile properties of recycled mixed plastic waste. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 09-12 Dec 2014, Byron Bay, Australia.

Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275

Eley-Rideal mechanism

Cooney, T. I. and Cardona, F. and Tran-Cong, T. (2011) Kinetics of in situ epoxidation of hemp oil under heterogeneous reaction conditions: an overview with preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27-29 Apr 2011, Brisbane, Australia.

embed

Peauril, J. and Epaarachchi, J. and Lau, K. T. and Wang, H. (2013) Embedded fibre optic sensors under multi-axial loading: a pilot study. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

embeddable

Xu, Weilin and Xia, Zhigang and Wang, Xin and Chen, Jun and Cui, Weigang and Ye, Wenxiang and Ding, Cailing and Wang, Xungai (2011) Embeddable and locatable spinning. Textile Research Journal, 81 (3). pp. 223-229. ISSN 0040-5175

embeddable and locatable spinning

Xia, Zhigang and Wang, Xin and Ye, Wenxiang and Eltahir, Hafiz A. and Xu, Weilin (2012) Fiber trapping comparison of embeddable and locatable spinning with sirofil and siro core-spinning with flute pipe air suction. Textile Research Journal, 82 (12). pp. 1255-1262. ISSN 0040-5175

embedded FBG

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

embedded sensors

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

emergency services

Wahalathantri, Buddhi and Lokuge, Weena and Karunasena, Warna and Setunge, Sujeeva (2015) Emergency service demand in Queensland during natural disasters. In: 5th International Conference on Building Resilience, 15-17 July 2015, Newcastle, Australia.

empirical model

Epaarachchi, J. and Ku, H. and Gohel, K. (2010) A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites. Journal of Composite Materials, 44 (6). pp. 779-788. ISSN 0021-9983

end mills

Ku, Harry S. and Chia, Wee Chong (2006) Design of multi-purpose carbide end mill. Institution of Engineers, Malaysia. Journal, 67 (2). pp. 34-40. ISSN 0126-513X

energy absorption

Thota, Narasimha M. and Epaarachchi, Jayantha A. and Lau, Kin-tak (2013) Effect of the energy absorbing mechanisms on the blunt thoracic trauma caused by a typical foam projectile. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

Malvern, J. L. and Epaarachchi, J. A. and Lau, K. T. (2011) Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions. In: 18th International Conference on Composite Materials (ICCM-18), 21-26 Aug 2011, Jeju Island, South Korea.

Lau, Sindy Mei-Ling and Lau, Kin-Tak and Yin, Yan-Sheng and Li, Lan and Wong, May and Chan, Kevin and Chen, William (2010) A shape memory alloy energy absorber for backpack design. Materials and Manufacturing Processes, 25 (4). pp. 281-286. ISSN 1042-6914

energy absorption behaviour

Guades, Ernesto and Aravinthan, Thiru and Manalo, Allan and Islam, Mainul (2013) Damage modelling of repeatedly impacted square fibre reinforced polymer composite tube. Materials and Design, 47. pp. 687-697. ISSN 0264-1275

energy efficiency

Aldraho, Abdelnour and Kist, Alexander A. (2010) Heuristics for dynamic topologies to reduce power consumption of networks. In: Australasian Telecommunication Networks and Applications Conference (ATNAC 2010), 31 Oct-3 Nov 2010, Auckland, New Zealand.

energy storing rate criterion

Thota, Narasimha and Epaarachchi, Jayantha and Lau, Kin Tak (2015) Evaluation of the blunt thoracic trauma caused by solid sports ball impacts. Journal of Biomechanical Science and Engineering, 10 (2).

engineering

Abousnina, Rajab M. and Manalo, Allan and Shiau, Jim ORCID: https://orcid.org/0000-0002-9220-3184 and Lokuge, Weena (2016) An overview on oil contaminated sand and its engineering applications. International Journal of GEOMATE, 10 (19). pp. 1615-1622. ISSN 2186-2982

Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2012) An investigation on the student performance in first year fundamental engineering course engineering statistics. In: 15th International First Year in Higher Education Conference: New Horizons (FYHE 2012, 26-29 Jun 2012, Brisbane, Australia.

Aravinthan, Thiru and Lokuge, Weena and Manalo, Allan (2011) Effectiveness of formative online quizzes in learning and teaching a structural engineering course. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Aravinthan, Thiru and Manalo, Allan (2011) Student performance in an online postgraduate course on fibre composites for civil engineers. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

engineering analysis software

Banerjee, Sourish ORCID: https://orcid.org/0000-0001-5446-5290 and Karunasena, Warna and Kist, Alexander A. (2016) Challenges of teaching engineering analysis software to distance education students. In: 27th Annual Conference of the Australasian Association for Engineering Education (AAEE 2016): The Changing Role of the Engineering Educator for Developing the Future Engineer, 4‐7 Dec 2016, Coffs Harbour, Australia.

Engineering design

Chevali, V. ORCID: https://orcid.org/0000-0002-5648-0344 and Kandare, E. (2016) Rigid biofoam composites as eco-efficient construction materials. In: Biopolymers and biotech admixtures for eco-efficient construction materials. Woodhead Publishing Series in Civil and Structural Engineering (63). Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 275-304. ISBN 978-0-08-100214-8

Khattak, Hamid and Ku, Harry and Goh, Steven (2012) Courses for teaching leadership capacity in professional engineering degrees in Australia and Europe. European Journal of Engineering Education, 37 (3). pp. 279-296. ISSN 0304-3797

engineering education

Thorpe, David (2016) Experiential learning approaches for developing professional skills in postgraduate engineering students. In: International Conference on Engineering Education and Research (ICEER 2016), 21-24 November 2016, Sydney, Australia.

Ku, Harry S. (2012) Review on using packages to enhance the teaching of critical path networks. In: 2012 International MultiConference of Engineers and Computer Scientists (IMECS 2012), 14-16 Mar 2012, Hong Kong, China.

Aravinthan, Thiru (2010) Incorporating a variety of assessment tools in a web-based postgraduate course developed for practicing engineers. In: 21st Annual Conference of the Australasian Association for Engineering Education (AaeE 2010): Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

engineering leadership program

Khattak, Hamid and Ku, Harry and Goh, Steven (2012) Courses for teaching leadership capacity in professional engineering degrees in Australia and Europe. European Journal of Engineering Education, 37 (3). pp. 279-296. ISSN 0304-3797

engineering management science

Ku, H. and Fulcher, R. (2012) Using computer software packages to enhance the teaching in engineering management science: part 2 - programming techniques. Computer Applications in Engineering Education, 20 ( 1). pp. 114-123. ISSN 1099-0542

engineering materials

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao, eds. (2009) Futures in mechanics of structures and materials: proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), Toowoomba, Australia, 2-5 December 2008. Taylor & Francis (CRC Press), London, United Kingdom. ISBN 978-0-415-49196-9

enhancing effect

Wang, Shujun and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Cole, Ivan and Li, Qin (2015) Structural evolution of graphene quantum dots during thermal decomposition of citric acid and the corresponding photoluminescence. Carbon, 82 (C). pp. 304-313. ISSN 0008-6223

environment

Thorpe, David and Ryan, Neal and Charles, Michael (2008) Environmental sustainability - a driver for innovation in construction SMEs? In: 3rd International Conference of the CRC for Construction Innovation: Clients Driving Innovation: Benefiting from Innovation, 12-14 March 2008, Gold Coast, Australia.

environmental friendly

Zhuge, Yan (2010) Investigation of the effect of various additives on the strength of environmentally friendly permeable concrete. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

environmental regulation

Yousif, Belal F. ORCID: https://orcid.org/0000-0003-3847-5469 and Islam, Md Mainul and Salit, Mohd Sapuan (2013) Sustainable composites [Editorial]. Advances in Materials Science and Engineering. ISSN 1687-8434

environmentally responsible

Logitharan, R. L. and Somasundaraswaran, K. and Ramanujam, J. M. (2015) Recent design strategies adapted for foamed bituminous stabilisation in flexible pavement rehabilitation works in Queensland. In: 14th Conference of the International Association for Computer Methods and Recent Advances in Geomechanics (IACMAG 2014), 22-25 Sep 2014, Kyoto, Japan.

envirospheres

Ku, H. and Zhou, Hong and Wong, Peter and Su, Gang and Vadher, Jayent (2012) Modeling the flexural properties of SLG reinforced phenol formaldehyde composites using Langrage’s Method. Advanced Materials Research, 410. pp. 305-308. ISSN 1022-6680

Ku, H. S. (2011) Relationship between different mechanical properties of phenol formaldehyde SLG-reinforced composites. Journal of Reinforced Plastics and Composites, 30 (15). pp. 1281-1292. ISSN 0731-6844

Cardona, F. and Rogers, D. and Gurney, R. and Trada, M. and Ku, H. (2009) Flexural tests of phenol formaldehyde and SLG composites: pilot study. Journal of Reinforced Plastics and Composites, 28 (22). pp. 2761-2769. ISSN 0731-6844

Trada, Mohan and Ku, Harry and Vedhar, Jayant (2009) Flexural strength of phenol formaldehyde composites post-cured in microwaves: preliminary results. Multi-Functional Materials and Structures II. pp. 1399-1402. ISSN 1022-6680

Ku, H. and Xiang, W. and Pattarachaiyakoop, N. (2009) Mathematical modeling of the fracture toughness of phenol formaldehyde composites reinforced with E-spheres. Advanced Materials Research, 79-82. pp. 1165-1168. ISSN 1022-6680

Ku, H. and Cardona, F. and Pattarachaiyakoop, N. and Trada, M. (2009) Fracture toughness of phenol formaldehyde composites reinforced with e-spheres. Journal of Composite Materials, 43 (7). pp. 741-754. ISSN 0021-9983

Ku, H. and Jacobson, W. and Trada, M. and Cardona, F. and Rogers, D. (2008) Tensile tests of phenol formaldehyde SLG reinforced composites: pilot study. Journal of Composite Materials, 42 (26). pp. 2783-2793. ISSN 0021-9983

Ku, Harry and Rogers, David and Davey, Robert and Cardona, Francisco and Trada, Mohan (2008) Fracture toughness of phenol formaldehyde composites: pilot study. Journal of Materials Engineering and Performance, 17 (1). pp. 85-90. ISSN 1059-9495

Cardona, F. and Ku, H. and Pattarachaiyakoop, N. and Rogers, D. and Trada, M. (2007) Fracture toughness of phenol formaldehyde composites post-cured in microwaves. Journal of Electromagnetic Waves and Applications, 21 (14). pp. 2137-2146. ISSN 0920-5071

EPON

Vandenbroucke, A. and Cardona, F. and Ku, H. and Rogers, D. (2009) Effects of chopped hemp on mechanical and thermal properties of epoxy resins. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Ku, H. and Cardona, F. and Rogers, D. and Vandenbroucke, A. (2008) Effects of EPON on mechanical and thermal properties of epoxy resins. In: ICMMSE 2008: International Conference on Multifunctional Materials and Structures, 28-31 Jul 2008, Hong Kong.

epoxidation

Cooney, T. I. and Cardona, F. and Tran-Cong, T. (2011) Kinetics of in situ epoxidation of hemp oil under heterogeneous reaction conditions: an overview with preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27-29 Apr 2011, Brisbane, Australia.

Faigl, Pavel and Rogers, David and Maurin, Romain and Van Erp, Gerard (2007) Plant based resins for fibre composites. In: 4th Annual Composites Australia and Composites CRC Conference (CRC 2007): New Technology Taking Shape, 19-20 Apr 2007, Gold Coast, Australia.

epoxide groups

Wang, Jing and Sutti, Alessandra and Wang, Xungai and Lin, Tong (2011) Fast responsive and morphologically robust thermo-responsive hydrogel nanofibres from poly(N-isopropylacrylamide) and POSS crosslinker. Soft Matter, 7 (9). pp. 4364-4369. ISSN 1744-683X

epoxidized hemp oil

Manthey, Nathan William (2013) Development of hemp oil based bioresins for biocomposites. [Thesis (PhD/Research)]

Manthey, N. W. and Cardona, F. and Aravinthan, T. (2011) Mechanical properties of epoxidized hemp oil based biocomposites: preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27 -29 Apr 2011, Brisbane, Australia.

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2011) Natural fibre composites with QLD based fibres and vegetable oils. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

epoxidized oils

Cardona, Francisco (2012) Bio-resins: new structural renewable materials for bio-composite applications. In: 4th KKU International Engineering Conference: Driving Together Towards ASEAN Economic Community (KKU-IENC 2012) , 10-12 May 2012, Khon Kaen University, Thailand.

epoxidized vegetable oil

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2010) Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review. In: Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

epoxidized vegetable oils

Faigl, Pavel and Rogers, David and Maurin, Romain and Van Erp, Gerard (2007) Plant based resins for fibre composites. In: 4th Annual Composites Australia and Composites CRC Conference (CRC 2007): New Technology Taking Shape, 19-20 Apr 2007, Gold Coast, Australia.

epoxies

Hafizi, Z. M. and Epaarachchi, J. and Nizwan, C. K. E. and Lau, K. T. (2012) Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study. IOP Conference Series: Materials Science and Engineering, 36 (1). ISSN 1757-8981

epoxy

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Aravinthan, Thiru (2016) Bond behaviour of composite sandwich panel and epoxy polymer matrix. In: 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2016), 14 - 16 Dec 2016, Hong Kong, CHina.

Lokuge, Weena and Aravinthan, Thiru (2014) Stress-strain behaviour of unconfined polymer concrete. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 9-12 Dec 2014, Byron Bay, Australia.

Lokuge, Weena and Aravinthan, Thiru (2013) Effect of fly ash on the behaviour of polymer concrete with different types of resin. Materials and Design, 51. pp. 175-181. ISSN 0264-1275

Shamsuddoha, M. and Islam, M. M. and Aravinthan, T. and Manalo, A. C. and Lau, K. T. (2013) Mechanical properties of epoxy grouts for structural repair. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Alsaeed, T. and Alajmi, A. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 and Ku, H. and Lau, Alan Kin-tak (2012) Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

Xu, Lihua and Fang, Zhengping and Song, Pingan ORCID: https://orcid.org/0000-0003-1082-652X and Peng, Mao (2010) Effects of corona discharge on the surface structure, morphology and properties of multi-walled carbon nanotubes. Applied Surface Science, 256 (21). pp. 6447-6453. ISSN 0169-4332

Guo, Qing Bing and Lau, Kin-Tak and Zheng, Bing Fa and Rong, Min Zhi and Zhang, Ming Qiu (2009) Imparting ultra-low friction and wear rate to epoxy by the incorporation of microencapsulated lubricant? Macromolecular Materials and Engineering, 294 (1). pp. 20-24. ISSN 1438-7492

Li, Xiao-Feng and Lau, Kin-Tak and Yin, Yan-Sheng (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology, 68 (14). pp. 2876-2881. ISSN 0266-3538

Suntharavadivel, T. G. and Aravinthan, T. (2008) Strengthening of shear damaged RC beams with external clamping. In: 4th International Conference on Structural and Construction Engineering (ISEC 4): Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

epoxy composites

Shalwan, A. and Yousif, B. F. ORCID: https://orcid.org/0000-0003-3847-5469 (2014) Investigation on interfacial adhesion of date palm/epoxy using fragmentation technique. Materials and Design, 53. pp. 928-937. ISSN 0261-3069

epoxy compounds

Aravinthan, Thiru and Suntharavadivel, T. G. (2007) Effects of existing shear damage on externally post tensioned repair of bent caps. Journal of Structural Engineering, 133 (11). pp. 1662-1669. ISSN 0733-9445

epoxy grout

Shamsuddoha, M. and Islam, M. M. and Aravinthan, T. and Manalo, A. and Djukic, L. P. (2014) Compressive, tensile and thermal properties of epoxy grouts subjected to underwater conditioning at elevated temperature. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 9-12 Dec 2014, Byron Bay, Australia.

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-Tak (2014) Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts. Journal of Multifunctional Composites, 2 (1). pp. 61-66. ISSN 2168-4278

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak (2013) Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines. Materials and Design, 52. pp. 315-327. ISSN 0264-1275

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak (2013) Cure shrinkage in epoxy grouts for grouted repairs. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

epoxy injection

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2007) Analytical studies on externally post tensioned concrete girders with existing shear cracks. In: 23rd Biennial Conference of the Concrete Institute of Australia: Concrete for Future, 18-20 October 2007, Adelaide, Australia.

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2006) Effect of existing cracks in concrete bridge members strengthened by external post-tensioning. In: FIB 2006: 2nd Congress (Federation Internationale du Beton), 5-8 Jun 2006, Naples, Italy.

Aravinthan, Thiru (2006) Is external post-tensioning an effective solution for shear strengthening of bridge elements? In: Structural Faults + Repair 2006: Eleventh International Conference on ‘Extending the Life of Bridges Concrete + Composites Buildings, Masonry + Civil Structures', 13-15 June 2006, Edinburgh, UK.

Epoxy resin

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Aravinthan, Thiru and Van Erp, Gerard (2016) Properties of epoxy polymer concrete matrix: Effect of resin-to-filler ratio and determination of optimal mix for composite railway sleepers. Construction and Building Materials, 124. pp. 287-300. ISSN 0950-0618

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Aravinthan, Thiru and Van Erp, Gerard (2015) Effect of ultraviolet radiation on the physical and mechanical properties of polymer matrix. In: 27th Biennial National Conference of the Concrete Institute of Australia (Concrete 2015) in conjunction with the 69th RILEM Week: Construction Innovations, Research into Practice, 30 Aug – 2 Sept 2015, Melbourne, Australia.

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Aravinthan, Thiru and Van Erp, Gerard (2015) Thermo-mechanical behaviour of epoxy based polymer matrix. In: 27th Biennial National Conference of the Concrete Institute of Australia (Concrete 2015) in conjunction with the 69th RILEM Week: Construction Innovations, Research into Practice, 30 Aug – 2 Sept 2015, Melbourne, Australia.

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Aravinthan, Thiru and Van Erp, Gerard (2014) Design of epoxy resin based polymer concrete matrix for composite railway sleeper. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 9-12 Dec 2014, Byron Bay, Australia.

Manalo, Allan (2014) Structural behavior of fibre composite guardrails. In: 7th International Conference on FRP Composites in Civil Engineering (CICE 2014), 20-22 Aug 2014, Vancouver, Canada.

Liu, Shan and Yan, Hongqiang and Fang, Zhengping and Guo, Zhenghong and Wang, Hao (2014) Effect of graphene nanosheets and layered double hydroxides on the flame retardancy and thermal degradation of epoxy resin. RSC Advances, 4 (36). pp. 18652-18659.

Ku, H. and Trada, Mohan (2013) Tensile properties of nanoclay reinforced epoxy composites. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Ku, H. and Epaarachchi, J. and Trada, M. and Wong, P. (2013) Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves. Journal of Reinforced Plastics and Composites, 32 (10). pp. 689-699. ISSN 0731-6844

Ku, H. and Trada, M. and Tai, P. (2013) Dielectric properties of sawdust reinforced epoxy composites post-cured in microwaves. Journal of Reinforced Plastics and Composites, 32 (10). pp. 765-774. ISSN 0731-6844

Ku, H. and Fung, S. Y. and Islam, M. and Li, X. and Chong, Y. P. (2013) A pilot study on flexural properties of epoxy nanoclay reinforced composites. Journal of Reinforced Plastics and Composites, 32 (2). pp. 96-104. ISSN 0731-6844

Trada, M. and Mandava, J. and Ku, H. and Yousif, B. ORCID: https://orcid.org/0000-0003-3847-5469 (2012) Tensile properties of bagasse reinforced epoxy composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Ku, H. and Wong, P. (2012) Contrast on tensile and flexural properties of glass powder reinforced epoxy composites: pilot study. Journal of Applied Polymer Science, 123 (1). pp. 152-161. ISSN 0021-8995

Ku, H. and Donald, M. and Cardona, F. and Trada, M. (2012) Flexural properties of sawdust-reinforced epoxy composites post-cured in microwaves. Journal of Composite Materials, 46 (22). pp. 2879-2890. ISSN 0021-9983

Ku, H. and Wong, P. and Huang, J. and Fung, H. and Mohan, T. (2011) Tensile tests of glass powder reinforced epoxy composites: pilot study. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

Ku, H. and Cardona, F. and Rogers, D. and Munoz, J.-C. (2010) Development of polymer network of phenolic and epoxies resins mixed with linseed oil: pilot study. Journal of Materials Engineering and Performance, 19 (6). pp. 912-919. ISSN 1059-9495

Wang, Zhicai and Xu, Cailing and Zhao, Yongqing and Zhao, Dandan and Wang, Zhe and Li, Hulin and Lau, Kin-Tak (2008) Fabrication and mechanical properties of exfoliated clay-CNTs/epoxy nanocomposites. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 490 (1-2). pp. 481-487. ISSN 0921-5093

Ku, H. and Cardona, F. and Rogers, D. and Vandenbroucke, A. (2008) Effects of EPON on mechanical and thermal properties of epoxy resins. In: ICMMSE 2008: International Conference on Multifunctional Materials and Structures, 28-31 Jul 2008, Hong Kong.

Munoz, J.-C. and Ku, H. and Cardona, F. and Rogers, D. (2008) Effects of catalysts and post-curing conditions in the polymer network of epoxy and phenolic resins: preliminary results. Journal of Materials Processing Technology, 202 (1-3). pp. 486-492. ISSN 0924-0136

epoxy resin hollow glass powder

Ku, H. and Wong, P. and Maxwell, A. and Huang, J. and Fung, H. and Mohan, T. (2011) A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

epoxy resins

Lam, Chun-Ki and Lau, Kin-Tak (2009) Optimization effect of micro hardness by nanoclay clusters in nanoclay/epoxy composites. Journal of Thermoplastic Composite Materials, 22 (2). pp. 213-225. ISSN 0892-7057

equiaxed structures

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

ergonomic design

Lau, Sindy Mei-Ling and Lau, Kin-Tak and Yin, Yan-Sheng and Li, Lan and Wong, May and Chan, Kevin and Chen, William (2010) A shape memory alloy energy absorber for backpack design. Materials and Manufacturing Processes, 25 (4). pp. 281-286. ISSN 1042-6914

error termination

Thota, N. M. and Epaarachchi, J. A. and Lau, K. T. (2013) Important aspects of finite element modeling of low density thermo plastic closed cell foams. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

ES-XFEM

Wu, L. and Liu, P. and Shi, C. and Zhang, Z. and Bui, Tinh Quoc and Jiao, D. (2016) Edge-based smoothed extended finite element method for dynamic fracture analysis. Applied Mathematical Modelling, 40 (19-20). pp. 8564-8579. ISSN 0307-904X

ester composites

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

Europe

Khattak, Hamid and Ku, Harry and Goh, Steven (2012) Courses for teaching leadership capacity in professional engineering degrees in Australia and Europe. European Journal of Engineering Education, 37 (3). pp. 279-296. ISSN 0304-3797

evaluation

Lokuge, Weena and Gamage, Nirdosha and Setunge, Sujeeva (2016) Fault tree analysis method for deterioration of timber bridges using an Australian case study. Built Environment Project and Asset, 6 (3). pp. 332-344. ISSN 2044-124X

Hurren, Christopher and Wang, Jing and Wood, Raymon and Li, Qing and Bibeau, Louis and Wang, Xungai (2013) Evaluation of cottonised hemp fibre produced using a new catalytic degumming system. In: 1st International Conference on Natural Fibers (ICNF 2013): Sustainable Materials for Advanced Applications, 9-11 Jun 2013, Guimaraes, Portugal .

EVO

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2010) Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review. In: Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Excel

Ku, H. and Fulcher, R. (2012) Using computer software packages to enhance the teaching in engineering management science: part 2 - programming techniques. Computer Applications in Engineering Education, 20 ( 1). pp. 114-123. ISSN 1099-0542

exfoliation

Wang, Zhicai and Xu, Cailing and Zhao, Yongqing and Zhao, Dandan and Wang, Zhe and Li, Hulin and Lau, Kin-Tak (2008) Fabrication and mechanical properties of exfoliated clay-CNTs/epoxy nanocomposites. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 490 (1-2). pp. 481-487. ISSN 0921-5093

expansion chambers

Choy, Yat-Sze and Lau, Kin-Tak and Wang, C. and Chau, C. W. and Liu, Yang and Hui, D. (2009) Composite panels for reducing noise in air conditioning and ventilation systems. Composites Part B: Engineering, 40 (4). pp. 259-266. ISSN 1359-8368

experiential learning

Thorpe, David (2016) Experiential learning approaches for developing professional skills in postgraduate engineering students. In: International Conference on Engineering Education and Research (ICEER 2016), 21-24 November 2016, Sydney, Australia.

experimental

Islam, Md Mainul and Aravinthan, Thiru and Williams, Paul Garreth (2012) Behaviour of pultruded FRP hollow sections under eccentric loading. In: 6th International Conference on FRP Composites in Civil Engineering (CICE 2012), 13-15 Jun 2012, Rome, Italy.

Guades, E. J. and Sirimanna, C. S. and Aravinthan, T. and Islam, M. M. (2011) Behaviour of fibre composite pile under axial compression load. In: 21st Australasian Conference on the Mechanics of Structures and MateriaIs (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Islam, M. M. and Aravinthan, T. (2011) Behaviour of fibre composite sandwich panels under uniformly distributed loading. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Pract