Items for Faculty/School / Institute/Centre :
Current - Institute for Advanced Engineering and Space Sciences - Centre for Future Materials (1 Jan 2017 -)

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors Name | Date | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | V | W | X | Y | Z
Number of items: 355.

A

Al-Rubaye, Mohammed and Manalo, Allan and Alajarmeh, Omar and Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Lokuge, Weena and Benmokrane, Brahim and Edoo, Azam (2020) Flexural behaviour of concrete slabs reinforced with GFRP bars and hollow composite reinforcing systems. Composite Structures, 236:111836. pp. 1-12.

Alajarmeh, O. S. and Manalo, A. C. and Benmokrane, B. and Karunasena, W. and Ferdous, W. ORCID: https://orcid.org/0000-0002-4473-4722 and Mendis, P. (2020) A New Design-Oriented Model of Glass Fiber-Reinforced Polymer-Reinforced Hollow Concrete Columns. ACI Structural Journal, 117 (2):117-S36. pp. 141-156. ISSN 0889-3241

Alajarmeh, O. S. and Manalo, A. C. and Benmokrane, B. and Karunasena, K. and Ferdous, W. ORCID: https://orcid.org/0000-0002-4473-4722 and Mendis, P. (2020) Hollow concrete columns: review of structural behavior and new designs using GFRP reinforcement. Engineering Structures, 203 (Article 109829). ISSN 0141-0296

Alajarmeh, Omar S. and Manalo, Allan C. and Benmokrane, Brahim and Karunasena, Warna and Mendis, Priyan (2020) Effect of spiral spacing and concrete strength on behavior of GFRP-reinforced hollow concrete columns. Journal of Composites for Construction, 24 (1 - Article 04019054). pp. 1-14. ISSN 1090-0268

Al-Saadi, A.U. and Aravinthan, T. and Lokuge, W. (2020) Numerical Investigation on Hollow Pultruded Fibre Reinforced Polymer Tube Columns. In: 25th Australasian Conference on Mechanics of Structures and Materials (ACMSM25), 4–7 Dec, 2018, Brisbane, Australia.

Alajarmeh, O. S. and Manalo, A. C. and Benmokrane, B. and Vijay, P. V. and Ferdous, W. ORCID: https://orcid.org/0000-0002-4473-4722 and Mendis, P. (2019) Novel testing and characterization of GFRP bars in compression. Construction and Building Materials, 225. pp. 1112-1126. ISSN 0950-0618

Al-saadi, Ali Umran and Aravinthan, Thiru and Lokuge, Weena (2019) Effects of fibre orientation and layup on the mechanical properties of the pultruded glass fibre reinforced polymer tubes. Engineering Structures, 198 (aRTICLE 109448). pp. 1-16. ISSN 0141-0296

Alajarmeh, Omar S. and Manalo, Allan C. and Benmokrane, Brahim and Karunasena, Warna and Mendis, Priyan (2019) Axial performance of hollow concrete columns reinforced with GFRP composite bars with different reinforcement ratios. Composite Structures, 213 (1). pp. 153-164. ISSN 0263-8223

Al Azzawi, Wessam and Herath, Madhubhashitha ORCID: https://orcid.org/0000-0002-6796-0802 and Epaarachchi, Jayantha (2019) Modeling, analysis, and testing of viscoelastic properties of shape memory polymer composites and a brief review of their space engineering applications. In: Creep and fatigue in polymer matrix composites, 2nd ed. Woodhead Publishing Series in Composites Science and Engineering. Woodhead Publishing Limited, United Kingdom, pp. 465-495. ISBN 978-0-08-102601-4

Alajarmeh, O. S. and Manalo, A. C. and Benmokrane, B. and Karunasena, W. and Mendis, P. and Nguyen, K. T. Q. (2019) Compressive behavior of axially loaded circular hollow concrete columns reinforced with GFRP bars and spirals. Construction and Building Materials, 194. pp. 12-23. ISSN 0950-0618

Albdiry, M. T. and Yousif, B. F. (2019) Toughening of brittle polyester with functionalized halloysite nanocomposites. Composites Part B: Engineering, 160. pp. 94-109. ISSN 1359-8368

Al-saadi, Ali Umran and Aravinthan, Thiru and Lokuge, Weena (2018) Structural applications of fibre reinforced polymer (FRP) composite tubes: a review of columns members. Composite Structures, 204. pp. 513-524. ISSN 0263-8223

Abousnina, Rajab and Manalo, Allan and Lokuge, Weena and Al-Jabri, Khalifa (2018) Properties and structural behavior of concrete containing fine sand contaminated with light crude oil. Construction and Building Materials, 189. pp. 1214-1231. ISSN 0950-0618

Al Azzawi, Wessam and Epaarachchi, J. A. and Leng, Jinsong (2018) Investigation of ultraviolet radiation effects on thermomechanical properties and shape memory behaviour of styrene-based shape memory polymers and its composite. Composites Science and Technology, 165. pp. 266-273. ISSN 0266-3538

Abousnina, Rajab and Manalo, Allan and Lokuge, Weena and Zhang, Zuhua (2018) Effects of light crude oil contamination on the physical and mechanical properties of geopolymer cement mortar. Cement and Concrete Composites, 90. pp. 136-149. ISSN 0958-9465

Aziz, N. and Mirzaghorbanali, A. and Yang, G. and Khaleghparast, S. and Rasekh, H. (2018) Innovative approach to strata reinforcement in coal mines with reference to evaluation cable bolts shear strength. Journal of Mining and Environment, 9 (3). pp. 703-715. ISSN 2251-8592

Abousnina, Rajab and Manalo, Allan and Lokuge, Weena and Zhang, Zuhua (2018) Effects of light crude oil contamination on the physical and mechanical properties of geopolymer cement mortar. Cement and Concrete Composites, 90. pp. 136-149. ISSN 0958-9465

Aziz, Naj and Rasekh, Haleh and Mirzaghorbanali, Ali and Yang, Guanyu and Khaleghparast, Saman and Nemcik, Jan (2018) An experimental study on the shear performance of fully encapsulated cable bolts in single shear test. Rock Mechanics and Rock Engineering. ISSN 0723-2632

Alantali, A. and Alia, R. A. and Umer, R. and Cantwell, W. J. (2018) Scaling effects in the manufacture and testing of grid-stiffened composite structures. Journal of Composite Materials. pp. 1-13. ISSN 0021-9983

Abdollahnejad, Zahra and Zhang, Zuhua and Wang, Hao and Mastali, Mohammad (2018) Comparative Study on the drying shrinkage and mechanical properties of geopolymer foam concrete incorporating different dosages of fiber, sand and foam agents. In: 2017 fib Symposium: High Tech Concrete: Where Technology and Engineering Meet, 12-14 June 2017, Maastricht, The Netherlands.

Alshammari, F. Z. and Saleh, K. H. and Yousif, B. F. and Alajmi, A. and Shalwan, A. and Alotaibi, J. G. (2018) The influence of fibre orientation on tribological performance of jute fibre reinforced epoxy composites considering different mat orientations. Tribology in Industry, 40 (3). pp. 335-348. ISSN 0354-8996

Al Azzawi, Wessam and Epaarachchi, J. A. and Islam, Mainul and Leng, Jinsong (2017) Implementation of a finite element analysis procedure for structural analysis of shape memory behaviour of fibre reinforced shape memory polymer composites. Smart Materials and Structures, 26 (12). ISSN 0964-1726

Aziz, A. R. and Ali, M. A. and Zeng, X. and Umer, R. and Schubel, P. and Cantwell, W. J. (2017) Transverse permeability of dry fiber preforms manufactured by automated fiber placement. Composites Science and Technology, 152. pp. 57-67. ISSN 0266-3538

Al Antali, A. and Umer, R. and Zhou, J. and Cantwell, W. J. (2017) The energy-absorbing properties of composite tube-reinforced aluminum honeycomb. Composite Structures, 176. pp. 630-639. ISSN 0263-8223

Alantali, A. and Alia, R. A. and Umer, R. and Cantwell, W. J. (2017) Energy absorption in aluminium honeycomb cores reinforced with carbon fibre reinforced plastic tubes. Journal of Sandwich Structures and Materials. ISSN 1099-6362

Abbott, T. and Gamage, N. and Setunge, S. and Lokuge, W. (2017) Predicting the remaining life of timber bridges. In: 12th World Congress on Engineering Asset Management & 13th International Conference on Vibration Engineering and Technology of Machinery , 2-4 August 2017, Brisbane, Australia.

Al Azzawi, Wessam and Epaarachchi, Jayantha A. and Leng, Jinsong (2017) Evaluating the temperature and glass fibre reinforcement effects on the damping properties of the shape memory polymers. In: 21st International Conference on Composite Materials (ICCM 21), 20-25 Aug 2017, Xi’an, China.

Aziz, Naj and Majoor, Dean and Mirzaghorbanali, Ali (2017) Strength properties of grout for strata reinforcement. Procedia Engineering, 191. pp. 1178-1184.

Al Azzawi, Wessam and Islam, Mainul M. and Leng, Jinsong and Li, Fengfeng and Epaarachchi, Jayantha A. (2017) Quantitative and qualitative analysis of mechanical behavior and dimensional stability of styrene-based shape memory composites. Journal of Intelligent Material Systems and Structures. ISSN 1045-389X

Ardalan, R. Bani and Jamshidi, N. and Arabameri, H. and Joshaghani, A. and Mehrinejad, M. and Sharafi, P. (2017) Enhancing the permeability and abrasion resistance of concrete using colloidal nano-Si02 oxide and spraying nanosilicon practices. Construction and Building Materials, 146. pp. 128-135. ISSN 0950-0618

B

Bo, Arixin and Liu, Qiong and Zhan, Haifei and Shi, Xiaolei ORCID: https://orcid.org/0000-0003-0905-2547 and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Gu, Yuantong (2020) Atomic Investigation on the Facet‐Dependent Melting of Ceramic Nanostructures via In Situ Electron Irradiation. Advanced Materials Interfaces, 7 (13):2000288. pp. 1-9.

Burey, Paulomi and Panchal, Sunil and Helwig, Andreas (2019) Food excess and by-product processing ‘ecosystem’ mode. In: 13th International Congress on Engineering and Food (ICEF13), 23-26 Sept, 2019, Melbourne, Australia.

Burey, Polly (2019) Value-addition to horticultural produce: How far can, or should, you go? In: Hort Connections 2019 (HORT 19), 24-26 June, 2019, Melbourne, Australia.

Bai, Yang and Lin, Yun and Ren, Long and Shi, Xiaolei ORCID: https://orcid.org/0000-0003-0905-2547 and Strounina, Ekaterina and Deng, Yehao and Wang, Qi and Fang, Yanjun and Zheng, Xiaopeng and Lin, Yuze and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Du, Yi and Wang, Lianzhou and Huang, Jinsong (2019) Oligomeric silica-wrapped perovskites enable synchronous defect passivation and grain stabilization for efficient and stable perovskite photovoltaics. ACS Energy Letters, 4 (6). pp. 1231-1240.

Burey, Polly (2019) Educating Future Generations of Food Scientists. In: Australian Institute of Food Science & Technology Annual Convention (AIFST 2019), 1-2 July, 2019, Sydney, Australia.

Benmokrane, Brahim and Nazair, Claude and Loranger, Marc-Antoine and Manalo, Allan (2018) Field durability study of vinyl-ester-based GFRP rebars in concrete bridge barriers. Journal of Bridge Engineering, 23 (12 - Article 0401809). pp. 1-13. ISSN 1084-0702

Bode, Rajesh Reddy and Islam, Md Mainul and Mahmood, Muhammad Nateque (2018) Compression and flexural properties of ground macadamia nutshell particulate composites. In: 11th Asian-Australasian Conference on Composite Materials (ACCM-11), 29 July - 1 August 2018, Cairns, Australia.

Borzou, R. and Lokuge, W. (2018) Rehabilitation of timber bridge piles using a wrapping system. In: 9th International Conference on Bridge Maintenance, Safety and Management (IABMAS 2018), 9-13 July 2018, Melbourne, Australia.

Benmokrane, Brahim and Nazair, Claude and Seynave, Xavier and Manalo, Allan (2017) Comparison between ASTM D7205 and CSA S806 tensile-testing methods for glass-fiber-reinforced-polymer bars. Journal of Composites for Construction, 21 (5). pp. 1-13. ISSN 1090-0268

Benmokrane, Brahim and Manalo, Allan and Bouhet, Jean-Charles and Mohamed, Khaled and Robert, Mathieu (2017) Effects of diameter on the durability of glass-fiber-reinforced-polymer (GFRP) bars conditioned in alkaline solution. Journal of Composites for Construction, 21 (5). pp. 1-12. ISSN 1090-0268

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2017) Durability characteristics and property prediction of glass fibre reinforced mixed plastics composites. Composites Part B: Engineering, 116. pp. 16-29. ISSN 1359-8368

Benmokrane, Brahim and Mohamed, Hamdy M. and Manalo, Allan and Cousin, Patrice (2017) Evaluation of physical and durability characteristics of new headed glass fiber–reinforced polymer bars for concrete structures. Journal of Composites for Construction, 21 (2). pp. 1-12. ISSN 1090-0268

Benmokrane, Brahim and Ali, Ahmed H. and Mohamed, Hamdy M. and El-Safty, Adel and Manalo, Allan (2017) Laboratory assessment and durability performance of vinyl-ester, polyester, and epoxy glass-FRP bars for concrete structures. Composites Part B: Engineering, 114. pp. 163-174. ISSN 1359-8368

C

Chen, Rui and Hu, Jie and Ma, Yuwei and Guo, Wenhao and Huang, Haoliang and Wei, Jiangxiong and Yin, Suhong and Yu, Qijun (2020) Characterization of the passive film formed on the reinforcement surface in alkali activated fly ash: surface analysis and electrochemical evaluation. Corrosion Science, 165 (Article 108393). ISSN 0010-938X

Chen, Zhen and Chan, Tommy H.T. and Nguyen, Andy and Yu, Ling (2019) Identification of vehicle axle loads from bridge responses using preconditioned least square QR-factorization algorithm. Mechanical Systems and Signal Processing, 128. pp. 479-496. ISSN 0888-3270

Cherry, Rebecca and Manalo, Allan and Karunasena, Warna and Stringer, Geoff (2019) Out-of-grade sawn pine: a state-of-the-art review on challenges and new opportunities in cross laminated timber (CLT). Construction and Building Materials, 211. pp. 858-868. ISSN 0950-0618

Chen, Guorong and An, Juan and Meng, Yiming and Yuan, Changzhou and Matthews, Bryan and Dou, Fei and Shi, Liyi and Zhou, Yongfeng and Song, Pingan and Wu, Gang and Zhang, Dengsong (2019) Cation and anion Co-doping synergy to improve structural stability of Li-and Mn-rich layered cathode materials for lithium-ion batteries. Nano Energy, 57. pp. 157-165. ISSN 2211-2855

Cao, Ruilin and Li, Baoliang and You, Nanqiao and Zhang, Yamei and Zhang, Zuhua (2018) Properties of alkali-activated ground granulated blast furnace slag blended with ferronickel slag. Construction and Building Materials, 192. 123-132. ISSN 0950-0618

Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Shi, Xiaolei ORCID: https://orcid.org/0000-0003-0905-2547 and Zhao, Li-Dong and Zou, Jin (2018) High-performance SnSe thermoelectric materials: progress and future challenge. Progress in Materials Science, 97. pp. 283-346. ISSN 0079-6425

Cohen, Jethro and Lokuge, Weena and Herath, Nilupa (2018) Investigating snipe depth in girders and corbels in timber bridges. In: 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 Jul 2018, Melbourne, Australia.

Chen, Zhen and Chan, Tommy H. T. and Nguyen, Andy (2018) Moving force identification based on modified preconditioned conjugate gradient method. Journal of Sound and Vibration, 423 (2018). pp. 100-117. ISSN 0022-460X

Cao, Shen and Huang, Zhong-Yue and Zu, Fang-Qiu and Xu, Ju and Yang, Lei and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2017) Enhanced thermoelectric properties of Ag-Modified Bi0.5Sb1.5Te3 composites by a facile electroless plating method. ACS Applied Materials & Interfaces, 9 (42). pp. 36478-36482. ISSN 1944-8244

D

Deng, Yi and Shi, Xiuyuan and Chen, Yong and Yang, Weizhong and Ma, Yuan and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Song, Pingan and Dargusch, Matthew S. and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2020) Bacteria-triggered pH-responsive osteopotentiating coating on 3D-printed polyetheretherketone scaffolds for infective bone defect repair. Industrial and Engineering Chemistry Research, 59 (26). pp. 12123-12135. ISSN 0888-5885

Deng, Yi and Gao, Xiangyu and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Lu, Siyu and Yang, Weizhong and Duan, Chunyan and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2020) Graphene Oxide and Adiponectin-Functionalized Sulfonated Polyetheretherketone with Effective Osteogenicity and Remotely Repeatable Photo-Disinfection. Chemistry of Materials, 32 (5). pp. 2180-2193. ISSN 0897-4756

Dargusch, Matthew and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Tran, Xuan Quy and Feng, Tianli and Somidin, Flora and Tan, Xin and Liu, Weidi and Jack, Kevin and Venezuela, Jeffrey and Maeno, Hiroshi and Toriyama, Takaaki and Matsumura, Syo and Pantelides, Sokrates T. and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2019) In-situ observation of the continuous phase transition in determining the high thermoelectric performance of polycrystalline Sn0.98Se. Journal of Physical Chemistry Letters, 10 (21). pp. 6512-6517.

Deng, L. and Ma, Y. and Hu, J. and Yin, S. and Ouyang, X. and Fu, J. and Liu, A. and Zhang, Z. (2019) Preparation and piezoresistive properties of carbon fiber-reinforced alkali-activated fly ash/slag mortar. Construction and Building Materials, 222. pp. 738-749. ISSN 0950-0618

Dong, Minhao and Lokuge, Weena and Elchalakani, Mohamed and Karrech, Ali (2019) Modelling glass fibre-reinforced polymer reinforced geopolymer concrete columns. Structures, 20. pp. 813-821. ISSN 2352-0124

Deng, Yi and Zhang, Kewei and Yang, Yuanyi and Shi, Xiuyuan and Yang, Lei and Yang, Weizhong and Wang, Yuan and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2019) Ce/Mn dual-doped LaAlO3 ceramics with enhanced far-infrared emission capability synthesized via a facile microwave sintering method. Journal of Alloys and Compounds, 774. pp. 434-442. ISSN 0925-8388

Deng, Yi and Zhang, Kewei and Shi, Xiuyuan and Dong, Taosheng and Yang, Lei and Yang, Weizhong and Hong, Min and Wang, Yuan and Dargusch, Matthew and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2019) Exploring the underlying mechanisms behind the increased far infrared radiation properties of perovskite-type Ce/Mn co-doped ceramics. Materials Research Bulletin, 109. pp. 233-239. ISSN 0025-5408

Deng, Yi and Gong, B. and Chao, Y. and Dong, T. and Yang, W. and Hong, Min and Shi, X. ORCID: https://orcid.org/0000-0003-0905-2547 and Wang, G. and Jin, Y. and Chen, Z.-G. ORCID: https://orcid.org/0000-0002-9309-7993 (2018) Sustainable utilization of municipal solid waste i incineration fly ash for ceramic bricks with eco-friendly biosafety. Materials Today Sustainability, 1-2. pp. 32-38. ISSN 2589-2347

Deng, Yi and Yang, Lei and Huang, Xiaobing and Chen, Junhong and Shi, Xiuyuan and Yang, Weizhong and Hong, Min and Wang, Yuan and Dargusch, Matthew and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2018) Dual Ag/ZnO-decorated micro-/nanoporous sulfonated polyetheretherketone with superior antibacterial capability and biocompatibility via layer-by-layer self-assembly strategy. Macromolecular Bioscience, 18 (7 (1800028)). pp. 1-12. ISSN 1616-5187

Dou, Fei and Shi, Liyi and Song, Pingan and Chen, Guorong and An, Juan and Liu, Hongjiang and Zhang, Dengsong (2018) Design of orderly carbon coatings for SiO anodes promoted by TiO2 toward high performance lithium-ion battery. Chemical Engineering Journal, 338. pp. 488-495. ISSN 1385-8947

Deng, Layun and He, Hongchen and Chen, Zejun and Liu, Shan and Chevali, Venkata S. (2017) Effects of wood fiber size on the performance of biodegradable foam. Journal of Biobased Materials and Bioenergy, 11 (3). pp. 206-209. ISSN 1556-6560

E

Elbadawi, Abdalwadood H. and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Li, Zhiheng and Liu, Shaomin and Wang, Shaobin and Zhu, Zhonghua (2020) Catalytic partial oxidation of methane to syngas: review of perovskite catalysts and membrane reactors. Catalysis Reviews: Science and Engineering. pp. 1-67. ISSN 0161-4940

El-Abidine Laidani, Zine and Benabed, Benchaa and Abousnina, Rajab and Gueddouda, M. Kamal and Khatib, M. Jamal (2020) Potential pozzolanicity of Algerian calcined bentonite used as cement replacement: optimisation of calcination temperature and effect on strength of self-compacting mortars. European Journal of Environmental and Civil Engineering (1964-8189). 2116 -7214. ISSN 1964-8189

Endruweit, A. and Zeng, X. and Matveev, M. and Long, A. C. (2018) Effect of yarn cross-sectional shape on resin flow through inter-yarn gaps in textile reinforcements. Composites Part A: Applied Science and Manufacturing, 104. pp. 139-150. ISSN 1359-835X

F

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Wong, Hong S. and Abousnina, Rajab and Alajarmeh, Omar S. and Zhuge, Yan and Schubel, Peter (2020) Optimal design for epoxy polymer concrete based on mechanical properties and durability aspects. Construction and Building Materials, 232 (Article 117229). ISSN 0950-0618

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Peauril, Joshua and Salih, Choman and Reddy, Kakarla Raghava and Peng, Yu and Schubel, Peter and Heyer, Tom (2020) Testing and modelling the fatigue behaviour of GFRP composites – effect of stress level, stress concentration and frequency. Engineering Science and Technology, an International Journal. pp. 1-10. ISSN 2215-0986

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Bai, Yu and Ngo, Tuan Duc and Manalo, Allan and Mendis, Priyan (2019) New advancements, challenges and opportunities of multi-storey modular buildings – a state-of-the-art review. Engineering Structures, 183. pp. 883-893. ISSN 0141-0296

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Ngo, Tuan Duc and Nguyen, Kate T. Q. and Ghazlan, Abdallah and Mendis, Priyan and Manalo, Allan (2018) Effect of fire-retardant ceram powder on the properties of phenolic-based GFRP composites. Composites Part B: Engineering, 155. pp. 414-424. ISSN 1359-8368

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Almutairi, Ahmed D. and Huang, Yuan and Bai, Yu (2018) Short-term flexural behaviour of concrete filled pultruded GFRP cellular and tubular sections with pin-eye connections for modular retaining wall construction. Composite Structures, 206. pp. 1-10. ISSN 0263-8223

Fang, Fang and Song, Pingan and Ran, Shiya and Guo, Zhenghong and Wang, Hao and Fang, Zhenping (2018) A facile way to prepare phosphorus-Nitrogen-Functionalized graphene oxide for enhancing the flame retardancy of epoxy resin. Composites Communications, 10. pp. 97-102. ISSN 2452-2139

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Bai, Yu and Almutairi, Ahmed D. and Satasivam, Sindu and Jeske, Juri (2018) Modular assembly of water-retaining walls using GFRP hollow profiles: Components and connection performance. Composite Structures, 194. pp. 1-11. ISSN 0263-8223

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Aravinthan, Thiru and Fam, Amir (2018) Flexural and shear behaviour of layered sandwich beams. Construction and Building Materials, 173. pp. 429-442. ISSN 0950-0618

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Van Erp, Gerard and Aravinthan, Thiru and Ghabraie, Kazem (2018) Evaluation of an innovative composite railway sleeper for a narrow-gauge track under static load. Journal of Composites for Construction, 22 (2). pp. 1-13. ISSN 1090-0268

Freudenberg, Brett and Chardon, Toni and Brimble, Mark and Belle Isle, Melissa (2017) Tax literacy of Australian small businesses. Journal of Australian Taxation, 18 (2). pp. 21-61. ISSN 1440-0405

Feng, Jiabin and Sun, Yiqi and Song, Pingan and Lei, Weiwei and Wu, Qiang and Liu, Lina and Yu, Youming and Wang, Hao (2017) Fire-resistant, strong and green polymer nanocomposites based on poly(lactic acid) and core-shell nanofibrous flame retardants. ACS Sustainable Chemistry and Engineering, 5 (9). pp. 7894-7904.

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Aravinthan, Thiru (2017) Effect of beam orientation on the static behaviour of phenolic core sandwich composites with different shear span-to-depth ratios. Composite Structures, 168. pp. 292-304. ISSN 0263-8223

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Aravinthan, Thiru (2017) Performance of an innovative composite railway sleeper. In: 2017 Advanced Composites Innovation Conference, 28 - 30 Mar 2017, Gold Coast, Australia.

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Aravinthan, Thiru (2017) Behaviour of composite sandwich beams with different shear span-to-depth ratios. In: 24th Australasian Conference on the Mechanics of Structures and Materials: Advancements and Challenges (ACMSM24), 6-9 Dec 2016, Perth, Australia.

Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Manalo, Allan and Aravinthan, Thiru (2017) Bond behaviour of composite sandwich panel and epoxy polymer matrix: Taguchi design of experiments and theoretical predictions. Construction and Building Materials, 145. pp. 76-87. ISSN 0950-0618

G

Greene, Isaac and Lokuge, Weena and Karunasena, Warna (2020) Structural design of floodways under extreme flood loading. International Journal of Disaster Resilience in the Built Environment. pp. 1-21. ISSN 1759-5908

Guo, Liang and Wu, Yueyue and Duan, Ping and Zhang, Zuhua (2020) Improving sulfate attack resistance of concrete by using calcined Mg-Al-CO3 LDHs: Adsorption behavior and mechanism. Construction and Building Materials, 232 (Article 117256). pp. 1-11. ISSN 0950-0618

Garg, Sahil and Li, Mengran and Rufford, Thomas E. and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Rudolph, Victor and Knibbe, Ruth and Konarova, Muxina and Wang, Geoff G.X. (2020) Catalyst-electrolyte Interactions in Aqueous Reline Solutions for Highly Selective Electrochemical CO2 Reduction. ChemSusChem, 13 (2). pp. 304-311. ISSN 1864-5631

Greene, I. and Lokuge, W. and Karunasena, W. (2020) Floodway Design Process Revisted. In: 25th Australasian Conference on Mechanics of Structures and Materials (ACMSM25), 4–7 Dec, 2018, Brisbane, Australia.

Garg, Sahil and Li, Mengran and Weber, Adam Z. and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Li, Liye and Rudolph, Victor and Wang, Guoxiong and Rufford, Thomas E. (2019) Advances and challenges in electrochemical CO2 reduction processes: an engineering and design perspective looking beyond new catalyst materials. Journal of Materials Chemistry A:8. pp. 1511-1544. ISSN 2050-7488

Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Soares, Fabio Terzini and Mahoney, Shilo and Hamilton, Christopher and Khan, Chawarwan and Steel, Karen and Rufford, Thomas E. and Rudolph, Victor (2019) Effect of oxidation and silane surface treatments of coal powders on relative permeability in packed coal beds. Journal of Natural Gas Science and Engineering, 69 (102931). pp. 1-9. ISSN 1875-5100

Gao, Shuai and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Villacorta, Byron S. and Rufford, Thomas E. and Zhu, Zhonghua (2019) Carbon monoliths by assembling carbon spheres for gas adsorption. Industrial & Engineering Chemistry Research, 58 (12). pp. 4957-4969. ISSN 0888-5885

Gao, Shuai and Villacorta, Byron S. and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Steel, Karen and Rufford, Thomas E. and Zhu, Zhonghua (2018) Effect of rheological properties of mesophase pitch and coal mixtures on pore development in activated carbon discs with high compressive strength. Fuel Processing Technology, 177. pp. 219-227. ISSN 0378-3820

Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Hamilton, Christopher and Febrina, Rahman Tasha and Rudolph, Victor and Rufford, Thomas E. (2018) A phase inversion polymer coating to prevent swelling and spalling of clay fines in coal seam gas wells. International Journal of Coal Science and Technology. ISSN 2095-8293

Gao, Shuai and Villacorta, Byron S. and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Rufford, Thomas E. and Zhu, Zhonghua (2017) Effect of sonication and hydrogen peroxide oxidation of carbon nanotube modifiers on the microstructure of pitch-derived activated carbon foam discs. Carbon, 124. pp. 142-151. ISSN 0008-6223

Ghanei, Amir and Jafari, Faezeh and Mehrinejad Khotbehsara, Mojdeh and Mohseni, Ehsan and Tang, Waiching and Cui, Hongzhi (2017) Effect of nano-CuO on engineering and microstructure properties of fibre-reinforced mortars incorporating metakaolin: experimental and numerical studies. Materials, 10 (10). ISSN 1996-1944

Gao, Shuai and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Rufford, Thomas E. and Zhu, Zhonghua (2017) The preparation of activated carbon discs from tar pitch and coal powder for adsorption of CO 2, CH 4 and N 2. Microporous and Mesoporous Materials, 238. pp. 19-26. ISSN 1387-1811

Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Lin, Rijia and Wang, Li and Rufford, Thomas E. and Villacorta, Byron and Liu, Shaomin and Liu, Lian X. and Zhu, Zhonghua (2017) Surface-etched halloysite nanotubes in mixed matrix membranes for efficient gas separation. Separation and Purification Technology, 173. pp. 63-71. ISSN 1383-5866

H

Herath, Madhubhashitha ORCID: https://orcid.org/0000-0002-6796-0802 and Epaarachchi, Jayantha and Islam, Mainul and Zhang, Fenghua and Leng, Jinsong and Fang, Liang and Yan, Cheng and Peng, Gang Ding and Schade, Wolfgang (2020) Remote actuation of light activated shape memory polymers via D-shaped optical fibres. Smart Materials and Structures, 29 (4):047001. ISSN 0964-1726

Hizam, R. M. and Manalo, Allan C. and Karunasena, Warna and Bai, Yu (2020) Joint strength of single-bolted pultruded GFRP square hollow sections with mechanical inserts under elevated temperatures. Journal of Composites for Construction, 24 (1 - Article 04019056). pp. 1-15. ISSN 1090-0268

Hou, Dongshuai and Zhang, Jinglin and Pan, Wang and Zhang, Yue and Zhang, Zuhua (2020) Nanoscale mechanism of ions immobilized by the geopolymer: A molecular dynamics study. Journal of Nuclear Materials, 528 (Article 151841). pp. 1-10. ISSN 0022-3115

Hassan, Md. Mehedi and Khan, Md. Tawhidul Islam and Hasemura, Yuji and Islam, Md. Mainul (2020) Performance investigation of two AE source location techniques on a Planar Multilayer Structure. International Journal of Acoustics and Vibration, 25 (2). pp. 226-235. ISSN 1027-5851

Herath, Madhubhashitha ORCID: https://orcid.org/0000-0002-6796-0802 and Islam, Mainul and Epaarachchi, Jayantha and Zhang, Fenghua and Leng, Jinsong (2019) 4D printed shape memory polymer composite structures for deployable small spacecrafts. In: ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2019), 9-11 Sept 2019, Louisville, Kentucky, Unite States.

Herath, Madhubhashitha ORCID: https://orcid.org/0000-0002-6796-0802 and Epaarachchi, Jayantha and Islam, Mainul and Yan, Cheng and Zhang, Fenghua and Leng, Jinsong (2019) Effects of selectively triggered photothermal particles on shape memory polymer composites: an investigation on structural performance, thermomechanical characteristics and photothermal behaviour. Journal of Intelligent Material Systems and Structures. ISSN 1045-389X

Herath, Madhubhashitha ORCID: https://orcid.org/0000-0002-6796-0802 and Epaarachchi, Jayantha and Islam, Mainul and Fang, Liang and Zhang, Fenghua and Leng, Jinsong (2019) Performance of rare earth organic complexes based light activated shape memory polymer composites. In: 22nd International Conference on Composites Materials (ICCM22), 11-16 Aug 2019, Melbourne, Australia.

Hu, Xiang and Shi, Caijun and Zhang, Zuhua and Hu, Zhangli (2019) Autogenous and drying shrinkage of alkali‐activated slag mortars. Journal of the American Ceramic Society, 102 (8). pp. 4963-4975. ISSN 0002-7820

Hizam, R. M. and Manalo, Allan C. and Karunasena, Warna and Bai, Yu (2019) Behaviour of pultruded GFRP truss system connected using through-bolt with mechanical insert. Composites Part B: Engineering, 168. pp. 44-57. ISSN 1359-8368

Herath, M. ORCID: https://orcid.org/0000-0002-6796-0802 and James, G. and Epaarachchi, J. (2019) Mechanical properties and thermomechanical behaviour of poly (ethylene-co-vinyl acetate) based shape memory polymer composites. In: 13th International Conference on the Mechanical Behaviour of Materials (ICM13), 11-14 June 2019, Melbourne, Australia.

Herath, H. M. C. M. ORCID: https://orcid.org/0000-0002-6796-0802 and Epaarachchi, J. A. and Islam, M. M. and Leng, J. (2019) Carbon fibre reinforced shape memory polymer composites for deployable space habitats. Engineer, LII (1). pp. 1-9.

Hong, Min and Zou, Jin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2019) Thermoelectric GeTe with diverse degrees of freedom having secured superhigh performance. Advanced Materials, 31 (14 - Article 1807071). pp. 1-23. ISSN 0935-9648

Hu, Hai-Long and Pham, Anh and Chen, Zhigang ORCID: https://orcid.org/0000-0002-9309-7993 and Duty, Timothy and Wang, Danyang and Li, Sean (2019) Enhanced mobility in LaAlO3/SrTiO3 heterostructures with layer-modulated patterning. Ceramics International, 45 (5). pp. 5496-5502. ISSN 0272-8842

Hong, Min and Wang, Yuan and Feng, Tianli and Sun, Qiang and Xu, Shengduo and Matsumura, Syo and Pantelides, Sokrates T. and Zou, Jin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2019) Strong phonon–phonon interactions securing extraordinary thermoelectric Ge1–xSbxTe with Zn-alloying-induced band alignment. Journal of the American Chemical Society, 141 (4). pp. 1742-1748.

Hong, Min and Wang, Yuan and Liu, Weidi and Matsumura, Syo and Wang, Hao and Zou, Jin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2018) Arrays of planar vacancies in superior thermoelectric Ge1−x−yCdxBiyTe with band convergence. Advanced Energy Materials, 8 (30 - Article 1801837). ISSN 1614-6832

Herath, H. M .C. M. ORCID: https://orcid.org/0000-0002-6796-0802 and Epaarachchi, J. A. and Islam, M. M. and Al-Azzawi, W. and Leng, J. and Zhang, F. (2018) Structural performance and photothermal recovery of carbon fibre reinforced shape memory polymer. Composites Science and Technology, 167. pp. 206-214. ISSN 0266-3538

Huang, Zhong-Yue and Zhang, He and Yang, Lei and Zhu, Bin and Zheng, Kun and Hong, Min and Yu, Yuan and Zu, Fang-Qiu and Zou, Jin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2018) Achieving high thermoelectric performance of Ni/Cu modified Bi0.5Sb1.5Te3 composites by a facile electroless plating. Materials Today Energy, 9. pp. 383-390. ISSN 2468-6069

Hizam, R. M. and Manalo, Allan C. and Karunasena, Warna and Bai, Yu (2018) Effect of bolt threads on the double lap joint strength of pultruded fibre reinforced polymer composite materials. Construction and Building Materials, 181. pp. 185-198. ISSN 0950-0618

Hong, Min and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Matsumura, Syo and Zou, Jin (2018) Nano-scale dislocations induced by self-vacancy engineering yielding extraordinary n-type thermoelectric Pb0.96-yInySe. Nano Energy, 50. pp. 785-793. ISSN 2211-2855

Herath, Madhubhashitha ORCID: https://orcid.org/0000-0002-6796-0802 and Epaarachchi, Jayantha and Islam, Mainul and Leng, Jinsong (2018) Near infrared light activated shape memory polymer composite for space applications. In: 11th Asian-Australasian Conference on Composite Materials (ACCM-11), 29 July - 1 August 2018, Cairns, Australia.

Hu, Hai-Long and Wang, Danyang and Tseng, Allen and Chen, Zhigang ORCID: https://orcid.org/0000-0002-9309-7993 and Kong, Charlie and Yi, Jiabao and Li, Sean (2018) Thickness dependence of magnetic behavior of LaAlO3/SrTiO3 heterostructures. Advanced Materials Interfaces, 5 (13 - Article 1800352).

Huang, Guobo and Han, Deman and Jin, Yanxian and Song, Pingan and Yan, Qidong and Gao, Chao (2018) Fabrication of nitrogen-doped graphene decorated with organophosphor and lanthanum towards high-performance polymer nanocomposites. ACS Applied Nano Materials, 1. pp. 3204-3213. ISSN 2574-0970

Hong, Min and Chen, Zhigang ORCID: https://orcid.org/0000-0002-9309-7993 and Zou, Jin (2018) Fundamental and progress of Bi2Te3-based thermoelectric materials. Chinese Physics B, 27 (4). pp. 1-25. ISSN 1674-1056

Hong, Min and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Yang, Lei and Liao, Zhi-Ming and Zou, Yi-Chao and Chen, Yan-Hui and Matsumura, Syo and Zou, Jin (2018) Achieving zT > 2 in p-Type AgSbTe2−xSex alloys via exploring the extra light valence band and introducing dense stacking faults. Advanced Energy Materials, 8 (9 - Article 1702333). ISSN 1614-6832

Hong, Min and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Yang, Lei and Zou, Yi-Chao and Dargusch, Matthew and Wang, Hao and Zou, Jin (2018) Realizing zT of 2.3 in Ge1−x−ySbxInyTe via reducing the phase-transition temperature and introducing resonant energy doping. Advanced Materials, 30 (11 - Article 1705942). ISSN 0935-9648

Herath, Madhubhashitha ORCID: https://orcid.org/0000-0002-6796-0802 and Al-Azzawi, Wessam and Epaarachchi, Jayantha and Islam, Mainul and Robertson, Scott and Leng, Jinsong and Zhang, F. (2018) Thermo-mechanical behaviour and shape memory characteristics of carbon fibre reinforced epoxy. In: 2018 International Conference on Nanoscience and Nanotechnology (ICONN 2018), 29 Jan - 2 Feb 2018, Wollongong, NSW, Australia.

Huang, Liqing and Qian, Ma and Wang, Lihua and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Shi, Zhiming and Nguyen, Van and Zou, Jin (2017) High-tensile-strength and ductile novel Ti-Fe-N-B alloys reinforced with TiS nanowires. Materials Science and Engineering A, 708. pp. 285-290. ISSN 0921-5093

Hong, Min and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Yang, Lei and Chasapis, Thomas C. and Kang, Stephen Dongmin and Zou, Yichao and Auchterlonie, Graeme John and Kanatzidis, Mercouri G. and Snyder, G. Jeffrey and Zou, Jin (2017) Enhancing the thermoelectric performance of SnSe1-xTex nanoplates through band engineering. Journal of Materials Chemistry A, 5 (21). pp. 10713-10721. ISSN 2050-7488

I

Iyu, Bangcheng and Wang, Aiguo and Zhang, Zuhua and Liu, Kaiwei and Xu, Haiyan and Shi, Liang and Sun, Daosheng (2019) Coral aggregate concrete: Numerical description of physical, chemical and morphological properties of coral aggregate. Cement and Concrete Composites, 100. pp. 25-34. ISSN 0958-9465

Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2018) An investigation on the student performance in first year fundamental engineering course, Engineering Statics. Educational Research Applications, 2018 (01). pp. 1-5. ISSN 2575-7032

J

Jayasundara, N. and Thambiratnam, D. P. and Chan, T. H. T. and Nguyen, A. (2020) Damage detection and quantification in deck type arch bridges using vibration based methods and artificial neural networks. Engineering Failure Analysis, 109:104265. pp. 1-19. ISSN 1350-6307

Jiang, Zongrui and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Zhuang, Linzhou and Li, Mengran and Wang, Zhanke and Zhu, Zhonghua (2019) Fine-Tuning the Coordinatively Unsaturated Metal Sites of Metal−Organic Frameworks by Plasma Engraving for Enhanced Electrocatalytic Activity. ACS Applied Materials & Interfaces, 11 (47). pp. 44300-44307. ISSN 1944-8244

Jin, Min and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Feng, Tianli and Liu, Weidi and Feng, Haifeng and Pantelides, Sokrates T. and Jiang, Jun and Chen, Yunxia and Du, Yi and Zou, Jin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2019) Super large Sn1−xSe single crystals with excellent thermoelectric performance. ACS Applied Materials and Interfaces, 11. pp. 8051-8059. ISSN 1944-8244

Jayasundara, Nirmani and Thambiratnam, David and Chan, Tommy and Nguyen, Andy (2019) Vibration-based dual-criteria approach for damage detection in arch bridges. Structural Health Monitoring. ISSN 1475-9217

Jamali, Shojaeddin and Chan, Tommy H. T. and Nguyen, Andy and Thambiratnam, David P. (2019) Reliability-based load carrying capacity assessment of bridges using structural health monitoring and nonlinear analysis. Structural Health Monitoring, 18 (1). pp. 20-34. ISSN 1475-9217

Jeewantha, Lama Hewage Janitha and Islam, Md Mainul and Epaarachchi, Jayantha Amanda (2019) Recent Progress in Shape Memory Polymers in Biomedical Applications. In: 1st International Conference on Mechanical and Manufacturing Engineering Research and Practice (iCMMERP-2019), 24-28 Nov, 2019, Sydney, Australia.

Jamali, Shojaeddin and Chan, Tommy H. T. and Koo, Ki-Young and Nguyen, Andy and Thambiratnam, David P. (2018) Capacity estimation of beam-like structures using substructural method. International Journal of Structural Stability and Dynamics, 18 (12 - Article 1850162). ISSN 0219-4554

Jamali, Shojaeddin and Chan, Tommy H. T. and Nguyen, Andy and Thambiratnam, David P. (2018) Modelling techniques for structural evaluation for bridge assessment. Journal of Civil Structural Health Monitoring, 8 (2). pp. 271-283. ISSN 2190-5452

Javazmi, Leila and Khoddami, Akbar and Mazrouei-Sebdani, Zahra and Shams-Ghahfarokhi, Farzaneh and Low, Tobias (2017) Fabrication of a silica aerogel and examination of its hydrophobic properties via contact angle and 3M water repellency tests. In: 2017 5th International Conference on Nano and Materials Engineering (ICNME 2017), 1-3 April 2017, Bali, Indonesia.

Jayatilake, Indunil Nayanakanthi (2017) Dynamic behaviour of composite sandwich beams and plates with debonds. [Thesis (PhD/Research)]

K

Kandare, E. and Yoo, S. and Chevali, V. S. and Khatibi, A. A. (2018) On the notch sensitivity of flax fibre metal laminates under static and fatigue loading. Fatigue and Fracture of Engineering Materials and Structures, 41 (8). pp. 1691-1705. ISSN 1460-2695

Kakei, Ayad and Epaarachchi, J. A. and Islam, Mainul and Leng, J. (2018) Evaluation of delamination crack tip in woven fibre glass reinforced polymer composite using FBG sensor spectra and thermo-elastic response. Measurement, 122. pp. 178-185. ISSN 0263-2241

Kakei, Ayad Arab and Islam, Mainul and Leng, Jingsong and Epaarachchi, Jayantha A. (2018) Use of an elasto-plastic model and strain measurements of embedded fibre Bragg grating sensors to detect Mode I delamination crack propagation in woven cloth (0/90) composite materials. Structural Health Monitoring, 17 (2). pp. 363-378. ISSN 1475-9217

Kakei, Ayad and Epaarachchi, Jayantha A. (2018) Use of fiber Bragg grating sensors for monitoring delamination damage propagation in glass-fiber reinforced composite structures. Frontiers of Optoelectronics, 11 (1). pp. 60-68. ISSN 2095-2759

Khan, Belas Ahmed and Na, Haining and Chevali, Venkata and Warner, Philip and Zhu, Jin and Wang, Hao (2018) Glycidyl methacrylate-compatibilized poly(lactic acid)/hemp hurd biocomposites: processing, crystallization, and thermo-mechanical response. Journal of Materials Science and Technology, 34 (2). pp. 387-397. ISSN 1005-0302

Konarova, Muxina and Aslam, Waqas and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Ma, Qing and Tang, Fengqiu and Rudolph, Victor and Beltramini, Jorge Norberto (2017) Enabling process intensification by 3D printing of catalytic structures. ChemCatChem, 9 (21). pp. 4132-4138. ISSN 1867-3880

Khan, Ziaullah and Yousif, B. F. and Islam, Mainul (2017) Fracture behaviour of bamboo fiber reinforced epoxy composites. Composites Part B: Engineering, 116. pp. 186-199. ISSN 1359-8368

Khan, Kamran A. and Umer, Rehan (2017) Modeling the viscoelastic compaction response of 3D woven fabrics for liquid composite molding processes. Journal of Reinforced Plastics and Composites, 36 (18). pp. 1299-1315. ISSN 0731-6844

Khan, Belas Ahmed (2017) Development of antibacterial hemp hurd/poly(lactic acid) biocomposite for food packaging. [Thesis (PhD/Research)]

L

Lin, Rijia and Hou, Jingwei and Li, Mengran and Wang, Zhanke and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Li, Shichun and Smart, Simon and Zhu, Zhonghua and Bennett, Thomas D. and Chen, Vicki (2020) Interfacial engineering of polymer-MOF composite by in situ vitrification. Chemical Communications, 56 (25). pp. 3609-3612. ISSN 1359-7345

Lokuge, W. and Fraser, C. and Karunasena, W. (2020) Performance of Bridges with Damaged Elements in Extreme Flood Events. In: 25th Australasian Conference on Mechanics of Structures and Materials (ACMSM25), 4–7 Dec, 2018, Brisbane, Australia.

Liu, Wei-Di and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Lin, Zi-Jie and Sun, Qiang and Han, Guang and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Zou, Jin (2020) Morphology and Texture Engineering Enhancing Thermoelectric Performance of Solvothermal Synthesized Ultra-large SnS Microcrystal. ACS Applied Energy Materials, 3 (3). pp. 2192-2199. ISSN 2574-0962

Longhi, Marlon A. and Rodriguez, Erich D. and Walkley, Brant and Zhang, Zuhua and Kirchheim, Ana Paula (2020) Metakaolin-based geopolymers: Relation between formulation, physicochemical properties and efflorescence formation. Composites Part B: Engineering, 182 (Article 107671). pp. 1-15. ISSN 1359-8368

Li, Ning and Shi, Caijun and Zhang, Zuhua and Wang, Hao and Liu, Yiwei (2019) A review on mixture design methods for geopolymer concrete. Composites Part B: Engineering, 178 (Article 107490). ISSN 1359-8368

Longhi, Marlon and Walkley, Brant and Rodriguez, Erich D and Kirchheim, Ana P and Zhang, Zuhua and Wang, Hao (2019) New selective dissolution process to quantify reaction extent and product stability in metakaolin-based geopolymers. Composites Part B: Engineering, 176 (1). ISSN 1359-8368

Liu, Wei-Di and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Moshwan, Raza and Yang, Lei and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Zou, Jin (2019) Solvothermal synthesis of high-purity porous Cu1.7Se approaching low lattice thermal conductivity. Chemical Engineering Journal, 375 (Article 121996). ISSN 1385-8947

Liang, Guangwei and Zhu, Huajun and Zhang, Zuhua and Wu, Qisheng (2019) Effect of rice husk ash addition on the compressive strength and thermal stability of metakaolin based geopolymer. Construction and Building Materials, 222. pp. 872-881. ISSN 0950-0618

Liang, Guangwei and Zhu, Huajun and Zhang, Zuhua and Wu, Qisheng and Du, Jianzhou (2019) Investigation of the waterproof property of alkali-activated metakaolin geopolymer added with rice husk ash. Journal of Cleaner Production, 230. pp. 603-612. ISSN 0959-6526

Li, Ning and Shi, Caijun and Zhang, Zuhua (2019) Understanding the roles of activators towards setting and hardening control of alkali-activated slag cement. Composites Part B: Engineering, 171. pp. 34-45. ISSN 1359-8368

Liu, Wei-Di and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Moshwan, Raza and Sun, Qiang and Yang, Lei and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Zou, Jin (2019) Effectively restricting MnSi precipitates for simultaneously enhancing the Seebeck coefficient and electrical conductivity in higher manganese silicide. Journal of Materials Chemistry C, 7 (24). pp. 7212-7218. ISSN 2050-7526

Liu, Yiwei and Shi, Caijun and Zhang, Zuhua and Li, Ning (2019) An overview on the reuse of waste glasses in alkali-activated materials. Resources, Conservation and Recycling, 144. pp. 297-309. ISSN 0921-3449

Longhi, Marlon and Zhang, Zuhua and Rodriguez, Erich and Kirchheim, Ana and Wang, Hao (2019) Efflorescence of alkali-activated cements (geopolymers) and the impacts on material structures: A critical analysis. Frontiers in Materials, 6 (Article 89).

Liu, Wei-Di and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Gao, Han and Moshwan, Raza and Xu, Sheng-Duo and Wang, Yuan and Yang, Lei and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Zou, Jin (2019) Kinetic condition driven phase and vacancy enhancing thermoelectric performance of low-cost and eco-friendly Cu2-xS. Journal of Materials Chemistry C, 7. pp. 5366-5373. ISSN 2050-7526

Liu, Shi-Jian and Zou, Yi-Chao and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Li, Qi-Zhen and Yang, Yu-Zhe and Liu, Wei-Di and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Zou, Jin (2019) Vapour-solid growth of MoxW1-xTe2 nanobelts by a facile chemical vapour deposition method. Journal of Alloys and Compounds, 777. pp. 926-930. ISSN 0925-8388

Lokuge, Weena and Abousnina, Rajab and Herath, Nilupa (2019) Behaviour of geopolymer concrete filled pultruded GFRP short columns. Journal of Composite Materials. ISSN 0021-9983

Lokuge, Weena and Wilson, Matthew and Tran, Huu and Setunge, Sujeeva (2019) Predicting the probability of failure of timber bridges using fault tree analysis. Structure and Infrastructure Engineering. ISSN 1573-2479

Le, N. T. and Thambiratnam, D. P. and Nguyen, A. and Chan, T. H. T (2019) A new method for locating and quantifying damage in beams from static deflection changes. Engineering Structures, 180 (2019). pp. 779-792. ISSN 0141-0296

Li, Yue and Jin, Cailan and Peng, Yuelian and An, Quanfu and Chen, Zhengping and Zhang, Jiacheng and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Wang, Shaobin (2019) Fabrication of PVDF hollow fiber membranes via integrated phase separation for membrane distillation. Journal of the Taiwan Institute of Chemical Engineers, 95. pp. 487-494. ISSN 1876-1070

Li, Xuwei and Yang, Guanyu and Nemcik, Jan and Mirzaghorbanali, Ali and Aziz, Naj (2019) Numerical investigation of the shear behaviour of a cable bolt in single shear test. Tunnelling and Underground Space Technology, 84. pp. 227-236. ISSN 0886-7798

Liu, Weidi and Shi, Xiaolei ORCID: https://orcid.org/0000-0003-0905-2547 and Hong, Min and Yang, Lei and Moshwan, Raza and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Zou, Jin (2018) Ag doping induced abnormal lattice thermal conductivity in Cu2Se. Journal of Materials Chemistry C, 6 (48). pp. 13225-13231. ISSN 2050-7526

Liu, Xiaohuan and Zong, Enmin and Hu, Weijie and Song, Pingan and Wang, Jifu and Liu, Qingchun and Ma, Zhongqing and Fu, Shenyuan (2018) Lignin-derived porous carbon loaded with La(OH)3 nanorods for highly efficient removal of phosphate. ACS Sustainable Chemistry and Engineering, 7 (1). pp. 758-768. ISSN 2168-0485

Liu, Yi and Yan, Chunjie and Zhao, Junjie and Zhang, Zuhua and Wang, Hongquan and Zhou, Sen and Wu, Linmei (2018) Synthesis of zeolite P1 from fly ash under solvent-free conditions for ammonium removal from water. Journal of Cleaner Production, 202. pp. 11-22. ISSN 0959-6526

Li, Ning and Shi, Caijun and Zhang, Zuhua and Zhu, Deju and Hwang, Hyeon-Jong and Zhu, Yuhan and Sun, Tengjiao (2018) A mixture proportioning method for the development of performance-based alkali-activated slag-based concrete. Cement and Concrete Composites, 93. pp. 163-174. ISSN 0958-9465

Liu, Weidi and Shi, Xiaolei ORCID: https://orcid.org/0000-0003-0905-2547 and Moshwan, Raza and Hong, Min and Yang, Lei and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Zou, Jin (2018) Enhancing thermoelectric performance of (Cu1-xAgx)2Se via CuAgSe secondary phase and porous design. Sustainable Materials and Technologies, 17 (e00076). pp. 1-8. ISSN 2214-9929

Liu, Wei-Di and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Zou, Jin (2018) Eco-friendly higher manganese silicide thermoelectric materials: progress and future challenges. Advanced Energy Materials, 8 (19 - Article 1800056). ISSN 1614-6832

Liu, Qiufang and Qian, Yuyi and Li, Panli and Zhang, Sihang and Wang, Zerong and Liu, Jianjun and Sun, Xiaoguang and Fulham, Michael and Feng, Dagan and Chen, Zhigang ORCID: https://orcid.org/0000-0002-9309-7993 and Song, Shaoli and Lu, Wei and Huang, Gang (2018) The combined therapeutic effects of 131 iodine-labeled multifunctional copper sulfide-loaded microspheres in treating breast cancer. Acta Pharmaceutica Sinica B, 8 (3). pp. 371-380. ISSN 2211-3835

Lokuge, Weena and Wilson, Aaron and Gunasekara, Chamila and Law, David W. and Setunge, Sujeeva (2018) Design of fly ash geopolymer concrete mix proportions using Multivariate Adaptive Regression Spline model. Construction and Building Materials, 166. pp. 472-481. ISSN 0950-0618

Liu, Shan and Chevali, Venkata S. and Xu, Zhiguang and Hui, David and Wang, Hao (2018) A review of extending performance of epoxy resins using carbon nanomaterials. Composites Part B: Engineering, 136 (1). pp. 197-214. ISSN 1359-8368

Lin, Rijia and Villacorta Hernandez, Byron and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Zhu, Zhonghua (2018) Metal organic frameworks based mixed matrix membrane: An overview on filler/polymer interface. Journal of Materials Chemistry A, 6 (2). pp. 293-312. ISSN 2050-7488

Lokuge, Weena and Wilson, Matthew and Tran, Huu and Setunge, Sujeeva (2017) Predicting the failure of timber bridges by using current inspection reports. Engineering for Public Works (7). pp. 85-89.

Liu, Shan and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Gao, Shuai and Zhuang, Linzhou and Zhu, Zhonghua and Wang, Hao (2017) Activated carbon derived from bio-waste hemp hurd and retted hemp hurd for CO2 adsorption. Composites Communications, 5. pp. 27-30. ISSN 2452-2139

Lu, Xuemei and Peng, Yuelian and Qiu, Haoran and Liu, Xinrui and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 (2017) Anti-fouling membranes by manipulating surface wettability and their anti-fouling mechanism. Desalination, 413. pp. 127-135. ISSN 0011-9164

Liu, Yi and Yan, Chunjie and Zhang, Zuhua and Li, Lingyao and Wang, Hongquan and Pu, Song (2017) One-step fabrication of novel porous and permeable self-supporting zeolite block from fly ash. Materials Letters, 196. pp. 328-331. ISSN 0167-577X

Li, Ning and Shi, Caijun and Wang, Qing and Zhang, Zuhua and Ou, Zhihua (2017) Composition design and performance of alkali-activated cements. Materials and Structures, 50 (Article - 178). pp. 1-11. ISSN 1359-5997

Li, Lefan and Zhao, Pengfei and Luo, Yongyue and Yu, Heping and Tao, Jinlong and He, Dongning and Gong, Wei and Li, Dejun and Peng, Zheng and Wang, Zhifen (2017) Compatibility-tuned distribution of nanoparticles in co-continuous rubber structures toward microwave absorption enhancement. RSC Advances, 7 (2). pp. 1093-1100.

Li, Xuwei and Aziz, Naj and Mirzaghorbanali, Ali and Nemcik, Jan (2017) Comparison of the shear test results of a cable bolt on three laboratory test apparatuses. Tunnelling and Underground Space Technology, 61. pp. 82-89. ISSN 0886-7798

Liu, Shan (2017) Preparation of activated carbon from biomass and its application in gas adsorption. [Thesis (PhD/Research)]

M

Mehrinejad Khotbehsara, Mojdeh and Manalo, Allan and Aravinthan, Thiru and Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Nguyen, Kate T.Q. and Gangarao, Hota (2020) Ageing of particulate-filled epoxy resin under hygrothermal conditions. Construction and Building Materials, 249:118846. pp. 1-14. ISSN 0950-0618

Mohammed, Ali A. and Manalo, Allan C. and Maranan, Ginghis B. and Muttashar, Majid and Zhuge, Yan and Vijay, P. V. and Pettigrew, John (2020) Effectiveness of a novel composite jacket in repairing damaged reinforced concrete structures subject to flexural loads. Composite Structures, 233 (Article 111634). ISSN 0263-8223

Moshwan, Raza and Liu, Wei-Di and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Sun, Qiang and Gao, Han and Wang, Yun-Peng and Zou, Jin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2020) Outstanding thermoelectric properties of solvothermal-synthesized Sn1−3xInxAg2xTe micro-crystals through defect engineering and band tuning. Journal of Materials Chemistry A. pp. 1-10. ISSN 2050-7488

Ma, Y. and Yang, X. and Hu, J. and Zhang, Z. and Wang, H. (2019) Accurate determination of the 'time-zero' of autogenous shrinkage in alkali-activated fly ash/slag system. Composite Part B: Engineering, 177 (Article 107367). ISSN 1359-8368

Moshwan, Raza and Liu, Wei-Di and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Wang, Yun-Peng and Zou, Jin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2019) Realizing high thermoelectric properties of SnTe via synergistic band engineering and structure engineering. Nano Energy, 65. pp. 1-9. ISSN 2211-2855

Mohammed, Ali A. and Manalo, Allan C. and Maranan, Ginghis B. and Zhuge, Yan and Vijay, P. V. and Pettigrew, John (2019) Behavior of damaged concrete columns repaired with novel FRP jacket. Journal of Composites for Construction, 23 (3 - Article 04019013). ISSN 1090-0268

Moshwan, Raza and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Liu, Wei-Di and Wang, Yuan and Xu, Shengduo and Zou, Jin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2019) Enhancing thermoelectric properties of InTe nanoprecipitates-embedded Sn1-xInxTe microcrystals through anharmonicity and strain engineering. ACS Applied Energy Materials, 2 (4). pp. 2965-2971.

Moudood, Abul and Rahman, Anisur and Ochsner, Andreas and Islam, Mainul and Francucci, Gaston (2019) Flax fiber and its composites: an overview of water and moisture absorption impact on their performance. Journal of Reinforced Plastics and Composites, 38 (7). pp. 323-339. ISSN 0731-6844

Maranan, G. B. and Manalo, A. C. and Benmokrane, B. and Karunasena, W. and Mendis, P. and Nguyen, T. Q. (2019) Flexural behavior of geopolymer-concrete beams longitudinally reinforced with GFRP and steel hybrid reinforcements. Engineering Structures, 182. pp. 141-152. ISSN 0141-0296

Moshwan, Raza and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Liu, Wei-Di and Yang, Lei and Wang, Yuan and Hong, Min and Auchterlonie, Graeme and Zou, Jin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2018) High thermoelectric performance in sintered octahedron-shaped Sn(CdIn)xTe1+2x microcrystals. ACS Applied Materials and Interfaces, 10 (45). pp. 38944-38952. ISSN 1944-8244

Misnon, M. I. and Islam, M. M. and Epaarachchi, J. A. and Chen, H. and Goda, K. and Khan, M. T. I. (2018) Flammability characteristics of chemical treated woven hemp fabric reinforced vinyl ester composites. Science and Technology of Materials, 30 (3). pp. 174-188. ISSN 2603-6363

Monavari, Benyamin and Chan, Tommy H. T. and Nguyen, Andy and Thambiratnam, David P. (2018) Structural deterioration detection using enhanced autoregressive residuals. International Journal of Structural Stability and Dynamics, 18 (12 - Article 1850160). ISSN 0219-4554

Ma, Xue and Li, Liang-feng and Zhang, Fan and Zhang, Zu-hua and Wang, Hao and Wang, En-ze (2018) Microstructure and wear characteristics of ATZ ceramic particle reinforced gray iron matrix surface composites. China Foundry, 15 (3). pp. 167-172. ISSN 1672-6421

Mohammed, Ali A. and Manalo, Allan C. and Maranan, Ginghis B. and Zhuge, Yan and Vijay, P. V. (2018) Comparative study on the behaviour of different infill materials for pre-fabricated fibre composite repair systems. Construction and Building Materials, 172. pp. 770-780. ISSN 0950-0618

Ma, Y. and Wang, G. and Ye, G. and Hu, J. (2018) A comparative study on the pore structure of alkali-activated fly ash evaluated by mercury intrusion porosimetry, N2 adsorption and image analysis. Journal of Materials Science, 53 (8). pp. 5958-5972. ISSN 0022-2461

Mohammadi, S. and Ataei, M. and Khaloo Kakaie, R. and Mirzaghorbanali, A. (2018) Prediction of the main caving span in longwall mining using fuzzy MCDM technique and statistical method. Journal of Mining and Environment, 9 (3). pp. 717-726. ISSN 2251-8592

Maranan, G. B. and Manalo, A. C. and Benmokrane, B. and Karunasena, W. and Mendis, P. and Nguyen, T. Q. (2018) Shear behaviour of geopolymer-concrete beams transversely reinforced with continuous rectangular GFRP composite spirals. Composite Structures, 187. pp. 454-465. ISSN 0263-8223

Misnon, Mohd Iqbal and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Chen, Haizhen and Goda, Koichi and Khan, Md Tawhidul Islam (2018) Flammability characteristics of chemical treated woven hemp fabric. Advances in Materials Science and Engineering, 5 (1). pp. 1-20. ISSN 1687-8434

Mirzaghorbanali, Ali and Gregor, Peter and Alkandari, Hamed and Aziz, Naj and McDougall, Kevin (2018) Mechanical behaviours of grout for strata reinforcement. In: 2018 Coal Operators' Conference, 7-9 Feb 2018, Wollongong, NSW, Australia.

Mehrinejad Khotbehsara, Mojdeh and Mehdizadeh Miyandehi, Bahareh and Naseri, Farzad and Ozbakkaloglu, Togay and Jafari, Faezeh and Mohseni, Ehsan (2018) Effect of SnO2, ZrO2, and CaCO3 nanoparticles on water transport and durability properties of self-compacting mortar containing fly ash: experimental observations and ANFIS predictions. Construction and Building Materials (158). pp. 823-834. ISSN 0950-0618

Mirzaghorbanali, Ali and Rasekh, Haleh and Aziz, Naj and Yang, Guanyu and Khaleghparast, Saman and Nemcik, Jan (2017) Shear strength properties of cable bolts using a new double shear instrument, experimental study, and numerical simulation. Tunnelling and Underground Space Technology, 70 (70). pp. 240-253. ISSN 0886-7798

Ma, Shuji and Aziz, Naj and Nemcik, Jan and Mirzaghorbanali, Ali (2017) The effects of installation procedure on bond characteristics of fully grouted rock bolts. Geotechnical Testing Journal, 40 (5). ISSN 1945-7545

Mehrinejad Khotbehsara, Mojdeh and Mohseni, Ehsan and Ozbakkaloglu, Togay and Ranjbar, Malek Mohammad (2017) Durability characteristics of self-compacting concrete incorporating pumice and metakaolin. Journal of Materials in Civil Engineering, 29 (11). ISSN 0899-1561

Manalo, Allan and Maranan, Ginghis and Sharma, Sukrant and Karunasena, Warna and Bai, Yu (2017) Temperature-sensitive mechanical properties of GFRP composites in longitudinal and transverse directions: a comparative study. Composite Structures, 173. pp. 255-267. ISSN 0263-8223

Muttashar, Majid and Manalo, Allan and Karunasena, Warna and Lokuge, Weena (2017) Flexural behavior of glued GFRP tubes filled with concrete. In: 6th Asia-Pacific Conference on FRP in Structures (APFIS2017), 19-21 July 2017, Singapore.

Maranan, G. B. and Manalo, A. C. and Benmokrane, B. and Karunasena, W. and Mendis, P. (2017) Shear behavior of geopolymer concrete beams reinforced with glass fiber-reinforced polymer bars. ACI Structural Journal, 114 (2). pp. 337-348. ISSN 0889-3241

Manalo, Allan and Aravinthan, Thiru and Fam, Amir and Benmokrane, Brahim (2017) State-of-the-art review on FRP sandwich systems for lightweight civil infrastructure. Journal of Composites for Construction, 21 (1). pp. 1-16. ISSN 1090-0268

Muttashar, M. and Karunasena, W. and Manalo, A. and Lokuge, W. (2017) Behavior of pultruded multi-celled GFRP hollow beams with low-strength concrete infill. In: 24th Australasian Conference on the Mechanics of Structures and Materials: Advancements and Challenges (ACMSM24), 6-9 Dec 2016, Perth, Australia.

Muttashar, Majid and Manalo, Allan and Karunasena, Warna and Lokuge, Weena (2017) Flexural behaviour of multi-celled GFRP composite beams with concrete infill: experiment and theoretical analysis. Composite Structures, 159. pp. 21-33. ISSN 0263-8223

N

Nguyen, Andy and Chan, Tommy H. T. and Zhu, Xinqun (2019) Special issue: real world application of SHM in Australia. Structural Health Monitoring, 18 (1). pp. 3-4. ISSN 1475-9217

Nguyen, Khac-Duy and Chan, Tommy H. T. and Thambiratnam, David P. and Nguyen, Andy (2019) Damage identification in a complex truss structure using modal characteristics correlation method and sensitivity-weighted search space. Structural Health Monitoring, 18 (1). pp. 49-65. ISSN 1475-9217

Nguyen, Andy and Kodikara, K. A. Tharindu Lakshitha and Chan, Tommy H. T. and Thambiratnam, David P. (2019) Deterioration assessment of buildings using an improved hybrid model updating approach and long-term health monitoring data. Structural Health Monitoring, 18 (1). pp. 5-19. ISSN 1475-9217

Nguyen, A. and Kodikara, K. A. T. L. and Chan, T. H. T. and Thambiratnam, D. P. (2018) Toward effective structural identification of medium-rise building structures. Journal of Civil Structural Health Monitoring, 8 (1). pp. 63-75. ISSN 2190-5452

O

Ouldkhaoua, Younes and Benabed, Benchaa and Abousnina, Rajab and Kadri, El-Hadj and Khatib, Jamal (2020) Effect of using metakaolin as supplementary cementitious material and recycled CRT funnel glass as fine aggregate on the durability of green self-compacting concrete. Construction and Building Materials, 235:117802. ISSN 0950-0618

Ouldkhaoua, Younes and Benabed, Benchaa and Abousnina, Rajab and Kadri, El-Hadj (2020) Experimental study on the reuse of cathode ray tubes funnel glass as fine aggregate for developing an ecological self-compacting mortar incorporating metakaolin. Journal of Building Engineering, 27 (Article 100951).

Ouyang, Xiaowei and Ma, Yuwei and Liu, Ziyang and Liang, Jianjun and Ye, Guang (2019) Effect of the Sodium Silicate Modulus and Slag Content on Fresh and Hardened Properties of Alkali-Activated Fly Ash/Slag. Minerals, 10 (1):15. pp. 1-17.

Ouyang, Ling and Deng, Yi and Yang, Lei and Shi, Xiuyuan and Dong, Taosheng and Tai, Youyi and Yang, Weizhong and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2018) Graphene-oxide-decorated microporous polyetheretherketone with superior antibacterial capability and in vitro osteogenesis for orthopedic implant. Macromolecular Bioscience, 18 (6 - Article 1800036). ISSN 1616-5187

P

Pan, Yangli and Xu, Xiaomin and Zhong, Yijun and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Chen, Yubo and Veder, Jean-Pierre Marcel and Guan, Daqin and O’Hayre, Ryan and Li, Mengran and Wang, Guoxiong and Wang, Hao and Zhou, Wei and Shao, Zongping (2020) Direct evidence of boosted oxygen evolution over perovskite by enhanced lattice oxygen participation. Nature Communications, 11:2002. pp. 1-10. ISSN 2041-1723

Pathiranage, Thilini and Lokuge, Weena (2020) Vulnerability assessment of bridges subjected to extreme cyclonic events. Natural Hazards, 102 (1). pp. 401-417. ISSN 0921-030X

Pan, Lin and Liu, Wei-Di and Zhang, Jie-Yun and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Gao, Han and Liu, Qing-feng and Shen, Xiaodong and Lu, Chunhua and Wang, Yi-Feng and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2020) Synergistic effect approaching to record-high figure of merit in the shear exfoliated n-type Bi2O2-2xTe2xSe. Nano Energy, 69 (Article 104394). ISSN 2211-2855

Pathirage, Thisara S. and Chan, Tommy H. T. and Thambiratnam, David P. and Nguyen, Andy and Moragaspitiya, H. N. P. (2018) Prestress evaluation in prestressed concrete plate-like structures. International Journal of Lifecycle Performance Engineering, 2 (3/4). pp. 127-143. ISSN 2043-8648

Q

Qiu, Haoran and Peng, Yuelian and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Villacorta Hernandez, Byron and Zhu, Zhonghua (2018) Enhanced anti-fouling property in membrane distillation by pore channel surface modification. Applied Surface Science, 443. pp. 217-226. ISSN 0169-4332

Qian, Mengbo and Sun, Yiqi and Xu, Xiaodong and Liu, Lina and Song, Pingan and Yu, Youming and Wang, Hao and Qian, Jun (2017) 2D-alumina platelets enhance mechanical and abrasion properties of PA-612 via interfacial hydrogen-bond interactions. Chemical Engineering Journal, 308. pp. 760-771.

R

Rasappagari, M.R.R. and Karunasena, W. and Lokuge, W. (2020) Flexural Behavior of Functionally Graded-Graphene Reinforced Composite Plates. In: 25th Australasian Conference on Mechanics of Structures and Materials (ACMSM25), 4-7 Dec, 2018, Brisbane, Australia.

Ren, Fei and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Stelmashuk, Vitaliy and Rufford, Thomas E. and Xing, Huilin and Rudolph, Victor (2019) Characterisation and evaluation of shockwave generation in water conditions for coal fracturing. Journal of Natural Gas Science and Engineering, 66. pp. 255-264. ISSN 1875-5100

Andrew Wilfred Reid, Zuhua Zhang (2019) Assessment method. https://patents.google.com/patent/US10288597B2/en.

Raza, Syed Shabbar and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Rufford, Thomas E. and Chen, Zhongwei and Rudolph, Victor (2019) Anisotropic coal permeability estimation by determining cleat compressibility using mercury intrusion porosimetry and stress–strain measurements. International Journal of Coal Geology, 205. pp. 75-86. ISSN 0166-5162

Ren, Fei and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Arami-Niya, Arash and Rufford, Thomas E. and Xing, Huilin and Rudolph, Victor (2019) Gas storage potential and electrohydraulic discharge (EHD) stimulation of coal seam interburden from the Surat Basin. International Journal of Coal Geology, 208. pp. 24-36. ISSN 0166-5162

Ren, Fei and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Rufford, Thomas E. and Xing, Huilin and Rudolph, Victor (2018) Permeability enhancement of coal by chemical-free fracturing using high-voltage electrohydraulic discharge. Journal of Natural Gas Science and Engineering, 57. pp. 1-10. ISSN 1875-5100

Reddy, R. Muni Rami and Karunasena, W. and Lokuge, W. (2018) Free vibration of functionally graded-GPL reinforced composite plates with different boundary conditions. Aerospace Science and Technology, 78. pp. 147-156. ISSN 1270-9638

Rasekh, Haleh and Aziz, Naj and Mirzaghorbanali, Ali and Nemcik, Jan and Li, Xuwei and Yang, Guanyu and Khaleghparast, Saman (2017) Double shear testing of cable bolts with no concrete face contacts. Procedia Engineering, 191. pp. 1169-1177.

Ren, Daming and Yan, Chunjie and Duan, Ping and Zhang, Zuhua and Li, Lingyao and Yan, Zhongyun (2017) Durability performances of wollastonite, tremolite and basalt fiber-reinforced metakaolin geopolymer composites under sulfate and chloride attack. Construction and Building Materials, 134. pp. 56-66. ISSN 0950-0618

Rasekh, Haleh and Mirzaghorbanali, Ali and Nemcik, Jan and Aziz, Naj and Li, Xuwei (2017) A new equation for the shear strength of cable bolts incorporating the energy balance theory. Geotechnical and Geological Engineering, 35 (4). pp. 1529-1548. ISSN 0960-3182

S

Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Zou, Jin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2020) Advanced Thermoelectric Design: From Materials and Structures to Devices. Chemical Reviews. pp. 1-117. ISSN 0009-2665

Siddika, Ayesha and Al Mamun, Md. Abdullah and Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Alyousef, Rayed (2020) Performances, challenges and opportunities in strengthening reinforced concrete structures by using FRPs – A state-of-the-art review. Engineering Failure Analysis, 111:104480. pp. 1-29. ISSN 1350-6307

Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Tao, Xinyong and Zou, Jin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2020) High-performance thermoelectric SnSe: aqueous synthesis, innovations, and challenges. Advanced Science, 7 (7):1902923. pp. 1-51.

Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Chen, Gaopan and Xu, Li and Kang, Chengxi and Luo, Guihai and Luo, Haimei and Zhou, Yan and Dargusch, Matthew S. and Pan, Guoshun (2020) Achieving ultralow surface roughness and high material removal rate in fused silica via a novel acid SiO2 slurry and its chemical-mechanical polishing mechanism. Applied Surface Science, 500 (Article 144041). ISSN 0169-4332

Siddika, Ayesha and Al Mamun, Md. Abdullah and Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Saha, Ashish Kumer and Alyousef, Rayed (2019) 3D-printed concrete: applications, performance, and challenges. Journal of Sustainable Cement-Based Materials. pp. 1-38. ISSN 2165-0373

Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Liu, Wei-Di and Wu, Ang-Yin and Nguyen, Van T. and Gao, Han and Sun, Qiang and Moshwan, Raza and Zou, Jin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2019) Optimization of sodium hydroxide for securing high thermoelectric performance in polycrystalline Sn1 − xSe via anisotropy and vacancy synergy. InfoMat.

Su, Zhihao and Guo, Liang and Zhang, Zuhua and Duan, Ping (2019) Influence of different fibers on properties of thermal insulation composites based on geopolymer blended with glazed hollow bead. Construction and Building Materials, 203. pp. 525-540. ISSN 0950-0618

Shi, Xiaolei ORCID: https://orcid.org/0000-0003-0905-2547 and Wu, Angyin and Feng, Tianli and Zheng, Kun and Liu, Weidi and Sun, Qiang and Hong, Min and Pantelides, Sokrates T. and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Zou, Jin (2019) High thermoelectric performance in p-type polycrystalline Cd-doped SnSe achieved by a combination of cation vacancies and localized lattice engineering. Advanced Energy Materials, 9 (11 - Article 180352). pp. 1-15. ISSN 1614-6832

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2018) Thermal expansion properties of fused borosilicate syntactic foams. Nano Hybrids and Composites, 23. pp. 39-45. ISSN 2297-3400

Shi, Xiaolei ORCID: https://orcid.org/0000-0003-0905-2547 and Wu, Angyin and Liu, Weidi and Moshwan, Raza and Wang, Yuan and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Zou, Jin (2018) Polycrystalline SnSe with extraordinary thermoelectric property via nanoporous design. ACS Nano, 12 (11). pp. 11417-11425. ISSN 1936-0851

Shang, Hong-Jing and Ding, Fa-Zhu and Deng, Yuan and Zhang, He and Dong, Ze-Bin and Xu, Wen-Juan and Huang, Da-Xing and Gu, Hong-Wei and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2018) Highly (00l)-oriented Bi2Te3/Te heterostructure thin films with enhanced power factor. Nanoscale, 10 (43). pp. 20189-20195. ISSN 2040-3364

Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Xu, Li and Zhou, Yan and Zou, Chunli and Wang, Rongrong and Pan, Guoshun (2018) An in situ study of chemical-mechanical polishing behaviours on sapphire (0001) via simulating the chemical product-removal process by AFM-tapping mode in both liquid and air environments. Nanoscale, 10 (42). pp. 19692-19700. ISSN 2040-3364

Shi, Zhenguo and Shi, Caijun and Wan, Shu and Li, Ning and Zhang, Zuhua (2018) Effect of alkali dosage and silicate modulus on carbonation of alkali-activated slag mortars. Cement and Concrete Research, 113. pp. 55-64. ISSN 0008-8846

Shi, Xiaolei ORCID: https://orcid.org/0000-0003-0905-2547 and Zheng, Kun and Hong, Min and Liu, Weidi and Moshwan, Raza and Wang, Yuan and Qu, Xianlin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Zou, Jin (2018) Boosting the thermoelectric performance of p-type heavily Cu-doped polycrystalline SnSe via inducing intensive crystal imperfections and defect phonon scattering. Chemical Science, 9 (37). pp. 7376-7389. ISSN 2041-6520

Song, Pingan and Dai, Jinfeng and Chen, Guorong and Yu, Youming and Fang, Zhengping and Lei, Weiwei and Fu, Shenyuan and Wang, Hao and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2018) Bioinspired design of strong, tough, and thermally stable polymeric materials via nanoconfinement. ACS Nano, 12 (9). pp. 9266-9278. ISSN 1936-0851

Shi, Zhenguo and Shi, Caijun and Wan, Shu and Zhang, Zuhua (2018) Effects of alkali dosage and silicate modulus on alkali-silica reaction in alkali-activated slag mortars. Cement and Concrete Research, 111. pp. 104-115. ISSN 0008-8846

Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Zheng, Kun and Liu, Wei-Di and Wang, Yuan and Yang, Yu-Zhe and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Zou, Jin (2018) Realizing high thermoelectric performance in n-type highly distorted Sb-doped SnSe nicroplates via tuning high electron concentration and inducing intensive crystal defects. Advanced Energy Materials, 8 (21 - Article 1800775). ISSN 1614-6832

Song, Chengsheng and Zhou, Dali and Yang, Lei and Zhou, Jiabei and Liu, Can and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2018) Recovery TiO2 and sodium titanate nanowires as Cd(II) adsorbent from waste V2O5-WO3/TiO2 selective catalytic reduction catalysts by Na2CO3-NaCl-KCl molten salt roasting method. Journal of the Taiwan Institute of Chemical Engineers, 88. pp. 226-233. ISSN 1876-1070

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Khan, Md Tawhidul Islam (2018) Effects of water absorption on mechanical properties of glass microballoons/vinyl ester syntactic foams. Research and Reviews in Materials Science and Chemistry, 8 (1). pp. 59-119.

Schubel, P. and Umer, R. and Boateng, E. K. G. (2018) Modelling heat transfer through an FBG optical fibre. Composites Part A : Applied Science and Manufacturing, 109. pp. 184-196. ISSN 1359-835X

Shi, Xiaolei ORCID: https://orcid.org/0000-0003-0905-2547 and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Liu, Weidi and Yang, Lei and Hong, Min and Moshwan, Raza and Huang, Liqing and Zou, Jin (2018) Achieving high Figure of Merit in p-type polycrystalline Sn0.98Se via self-doping and anisotropy-strengthening. Energy Storage Materials, 10. pp. 130-138. ISSN 2405-8297

Sandanayake, Malindu and Lokuge, Weena and Zhang, Guomin and Setunge, Sujeeva and Thushar, Quddus (2017) Greenhouse gas emissions during timber and concrete building construction - a scenario based comparative case study. Sustainable Cities and Society , 38. pp. 91-97. ISSN 2210-6707

Song, Pingan and Xu, Zhiguang and Dargusch, Matthew and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Wang, Hao and Guo, Qipeng (2017) Granular nanostructure: a facile biomimetic strategy for the design of supertough polymeric materials with high ductility and strength. Advanced Materials, 29 (46). pp. 1-7. ISSN 0935-9648

Song, Yufei and Wang, Wei and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Xu, Xiaomin and Zhang, Zhenbao and Juliao, Paulo Sergio Barros and Zhou, Wei and Shao, Zongping (2017) Rational design of a water-storable hierarchical architecture decorated with amorphous barium oxide and nickel nanoparticles as a solid oxide fuel cell anode with excellent sulfur tolerance. Advanced Science, 4 (11).

Song, Pingan and Wang, Cong and Chen, Lei and Zheng, Yiqi and Liu, Lina and Wu, Qiang and Huang, Guobo and Yu, Youming and Wang, Hao (2017) Thermally stable, conductive and flame-retardant nylon 612 composites created by adding two-dimensional alumina platelets. Composites Part A: Applied Science and Manufacturing, 97. ISSN 1359-835X

Shamsuddoha, Md and Djukic, Luke P. and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan (2017) Mechanical and thermal properties of glass fibre-vinyl ester resin composite for pipeline repair exposed to hot-wet conditioning. Journal of Composite Materials, 51 (11). ISSN 0021-9983

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2017) Analysis of stress concentration factor for tensile characteristics of syntactic foam using finite element method. Journal of Research Updates in Polymer Science, 6 (1). pp. 21-32.

Sun, Shuai and Wang, Lipeng and Song, Pingan and Ding, Liping and Bai, Yongping (2017) Facile fabrication of hydrolysis resistant phosphite antioxidants for high-performance optical PET films via in situ incorporation. Chemical Engineering Journal, 328. pp. 406-416. ISSN 1385-8947

Sun, Yiqi and Sun, Shuai and Chen, Lei and Liu, Lina and Song, Pingan and Li, Wei and Yu, Youming and Lu, Fengzhu and Qian, Jun and Wang, Hao (2017) Flame retardant and mechanically tough poly(lactic acid) biocomposites via combining ammonia polyphosphate and polyethylene glycol. Composites Communications, 6. ISSN 2452-2139

Song, Pingan and Xu, Zhiguang and Wu, Yuanpeng and Cheng, Qunfeng and Guo, Qipeng and Wang, Hao (2017) Super-tough artificial nacre based on graphene oxide via synergistic interface interactions of Pi-Pi stacking and hydrogen bonding. Carbon, 111. pp. 807-812. ISSN 0008-6223

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Su, Haibin (2017) Vinyl ester/glass microballoon syntactic foams with low density. International Research Journal of Materials Sciences and Applications, 2017 (1). pp. 1-25. ISSN 2575-1034

Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Zou, Chunli and Pan, Guoshun and Gong, Hua and Xu, Li and Zhou, Yan (2016) Atomically smooth gallium nitride surface prepared by chemical mechanical polishing with S2O8 2−-Fe2+ based slurry. Tribology International, 110. pp. 441-450. ISSN 0301-679X

T

Tan, Ming and Liu, Wei-Di and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Gao, Han and Li, Hui and Li, Cong and Liu, Xiao-Biao and Deng, Yuan and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2019) Anisotropy control–induced unique anisotropic thermoelectric performance in the n-type Bi2Te2.7Se0.3 thin films. Small Methods, 3 (11 - Article 1900582).

Tran, Xuan Quy and Hong, Min and Maeno, Hiroshi and Kawami, Youichirou and Toriyama, Takaaki and Jack, Kevin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Zou, Jin and Matsumura, Syo and Dargusch, Matthew S. (2019) Real-time observation of the thermally-induced phase transformation in GeTe and its thermal expansion properties. Acta Materialia, 165. pp. 327-335. ISSN 1359-6454

Tu, Jian and Zhou, Kun-Feng and Zhou, Zhi-Ming and Huang, Can and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2018) Effects of ausforming procedure and following annealing treatment on microstructural characteristics in cobalt. Acta Metallurgica Sinica (English Letters), 31 (4). pp. 415-422. ISSN 1006-7191

Turner, Paul and Liu, Tao and Zeng, Xuesen and Brown, Kevin (2018) Three-dimensional woven carbon fibre polymer composite beams and plates under ballistic impact. Composite Structures, 185. pp. 483-495. ISSN 0263-8223

Taheri, Adel and Sereshki, Farhang and Ardejani, Faramarz Doulati and Mirzaghorbanali, Ali (2017) Simulation of macerals effects on methane emission during gas drainage in coal mines. Fuel, 210. pp. 659-665. ISSN 0016-2361

V

Vasileff, Anthony and Zhi, Xing and Xu, Chaochen and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Jiao, Yan and Zheng, Yao and Qiao, Shi-zhang (2019) Selectivity control for electrochemical CO2 reduction by charge redistribution on the surface of copper alloys. ACS Catalysis, 9 (10). pp. 9411-9417.

Viet, N. V. and Zaki, W. and Umer, R. (2018) Analytical model of functionally graded material/shape memory alloy composite cantilever beam under bending. Composite Structures, 203. pp. 764-776. ISSN 0263-8223

Viet, N. V. and Zaki, W. and Umer, R. (2018) Bending models for superelastic shape memory alloy laminated composite cantilever beams with elastic core layer. Composites Part B, 147. pp. 86-103. ISSN 1359-8368

Viet, N. V. and Zaki, W. and Umer, R. (2018) Interlaminar shear stress function for adhesively bonded multi-layer metal laminates. International Journal of Adhesion and Adhesives, 82. pp. 14-20. ISSN 0143-7496

Vasileff, Anthony and Xu, Chaochen and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Zheng, Yao and Qiao, Shi-Zhang (2018) Bronze alloys with tin surface sites for selective electrochemical reduction of CO2. Chemical Communications, 54 (99). pp. 13965-13968. ISSN 1359-7345

Vali, Ramin and Mehrinejad Khotbehsara, Elham and Saberian, Mohammad and Li, Jie and Mehrinejad, Mojdeh and Jahandari, Soheil (2017) A three-dimensional numerical comparison of bearing capacity and settlement of tapered and under-reamed piles. International Journal of Geotechnical Engineering. ISSN 1938-6362

W

Wu, Linmei (2020) Study on dimensional stability of ultra-high performance concrete (UHPC). [Thesis (PhD/Research)]

Wang, Song and Duan, Chunyan and Yang, Weizhong and Gao, Xiangyu and Shi, Jiacheng and Kang, Jianping and Deng, Yi and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2020) Two-dimensional nanocoating-enabled orthopedic implants for bimodal therapeutic applications. Nanoscale, 12 (22). pp. 11936-11946. ISSN 2040-3364

Wang, Yuan and Hong, Min and Liu, Wei-Di and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Xu, Sheng-Duo and Sun, Qiang and Gao, Han and Lu, Siyu and Zou, Jin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2020) Bi0.5Sb1.5Te3/PEDOT:PSS-based flexible thermoelectric film and device. Chemical Engineering Journal, 397:125360. pp. 1-9. ISSN 1385-8947

Wang, Yanru and Cao, Yubin and Zhang, Peng and Ma, Yuwei (2020) Effective Utilization of Waste Glass as Cementitious Powder and Construction Sand in Mortar. Materials, 13 (3):707. pp. 1-21.

Wu, Linmei and Xiaoluo, Cao and Zhenming, Li (2019) Behaviour of steel-reinforced concrete columns under combined torsion based on ABAQUS FEA. Engineering Structures. ISSN 0141-0296

Wang, Yuan and Liu, Wei-Di and Shi, XIao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Hong, Min and Wang, Li-Jun and Li, Meng and Wang, Hao and Zou, Jin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2019) Enhanced thermoelectric properties of nanostructured n-type Bi2Te3 by suppressing Te vacancy through non-equilibrium fast reaction. Chemical Engineering Journal. ISSN 1385-8947

Wang, Yuan and Liu, Wei-Di and Gao, Han and Wang, Li-Jun and Li, Meng and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Hong, Min and Wang, Hao and Zou, Jin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2019) High porosity in nanostructured n‑type Bi2Te3 obtaining ultralow lattice thermal conductivity. ACS Applied Materials and Interfaces, 11 (34). pp. 31237-31244. ISSN 1944-8244

Wang, Yuan and Yang, Lei and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Shi, Xun and Chen, Li-Dong and Dargusch, Matthew S. and Zou, Jin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2019) Flexible thermoelectric materials and generators: challenges and innovations. Advanced Materials, 31 (29 - Article 1807916). pp. 1-47. ISSN 0935-9648

Wang, Yanru and Cao, Yubin and Zhang, Peng and Ma, Yuwei and Zhao, Tiejun and Wang, Hao and Zhang, Zuhua (2019) Water absorption and chloride diffusivity of concrete under the coupling effect of uniaxial compressive load and freeze-thaw cycles. Construction and Building Materials, 209. pp. 566-576. ISSN 0950-0618

Wang, Xiao-yu and Wang, Hui-juan and Xiang, Bo and Shang, Hong-jing and Zhu, Bin and Yu, Yuan and Jin, Hui and Zhao, Run-fei and Huang, Zhong-yue and Liu, Lan-jun and Zu, Fang-qiu and Chen, Zhi-gang ORCID: https://orcid.org/0000-0002-9309-7993 (2019) Attaining reduced lattice thermal conductivity and enhanced electrical conductivity in as-sintered pure n-type Bi2Te3 alloy. Journal of Materials Science, 54. pp. 4788-4797. ISSN 0022-2461

Wang, Shunfeng and Ma, Xue and He, Liu and Zhang, Zuhua and Li, Liangfeng and Li, Yuxiang (2019) High strength inorganic-organic polymer composites (IOPC) manufactured by mold pressing of geopolymers. Construction and Building Materials, 198. pp. 501-511. ISSN 0950-0618

Wang, Zhanke and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Li, Mengran and Lin, Rijia and Wang, Hao and Zhu, Zhonghua (2019) Orientated growth of copper-based MOF for acetylene storage. Chemical Engineering Journal, 357. pp. 320-327. ISSN 1385-8947

Wang, Aiguo and Lyu, Bangcheng and Zhang, Zuhua and Liu, Kaiwei and Xu, Haiyan and Sun, Daosheng (2018) The development of coral concretes and their upgrading technologies: a critical review. Construction and Building Materials, 187. pp. 1004-1019. ISSN 0950-0618

Wahalathantri, Buddhi and Lokuge, Weena and Karunasena, Warna and Setunge, Sujeeva (2018) Quantitative assessment of flood discharges and floodway failures through cross-cultivation of advancement in knowledge and traditional practices. International Journal of Disaster Resilience in the Built Environment, 9 (4-5). pp. 435-456. ISSN 1759-5908

Wang, Chunyan and Wang, Shengnan and Yang, Yuanyi and Jiang, Zhuo and Deng, Yi and Song, Shaoli and Yang, Weizhong and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2018) Bioinspired, biocompatible and peptide-decorated silk fibroin coatings for enhanced osteogenesis of bioinert implant. Journal of Biomaterials Science, Polymer Edition, 29 (13). pp. 1595-1611. ISSN 0920-5063

Wang, Guisheng and Ma, Yuwei (2018) Drying shrinkage of alkali-activated fly ash/slag blended system. Journal of Sustainable Cement-Based Materials, 7 (4). pp. 203-213. ISSN 2165-0373

Wang, Xixi and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Zhu, Yinlong and Dai, Jie and Zhou, Wei and Shao, Zongping (2018) Silver-perovskite hybrid electrocatalysts for oxygen reduction reaction in alkaline media. Journal of the Electrochemical Society, 165 (9). H524-H529. ISSN 0013-4651

Wang, Y. and Thambiratnam, D. P. and Chan, T. H. T. and Nguyen, A. (2018) Damage detection in asymmetric buildings using vibration-based techniques. Structural Control and Health Monitoring, 25 (5). pp. 1-19. ISSN 1545-2255

Wang, Yi and Thambiratnam, David P. and Chan, Tommy H.T. and Nguyen, Andy (2018) Method development of damage detection in asymmetric buildings. Journal of Sound and Vibration, 423. pp. 41-56. ISSN 0022-460X

Wang, Shengnan and Deng, Yi and Yang, Lei and Shi, Xiuyuan and Yang, Weizhong and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2018) Enhanced antibacterial property and osteo-differentiation activity on plasma treated porous polyetheretherketone with hierarchical micro/nano-topography. Journal of Biomaterials Science, Polymer Edition, 29 (5). pp. 520-542. ISSN 0920-5063

Wu, Linmei and Liu, Peng and Zhang, Zuhua and Zhu, DeJu and Wang, Hao (2018) Multiscale modeling for high-performance concrete: a review. International Journal for Multiscale Computational Engineering, 16 (1). pp. 1-17. ISSN 1543-1649

Wu, Linmei and Farzadnia, Nima and Shi, Caijun and Zhang, Zuhua and Wang, Hao (2017) Autogenous shrinkage of high performance concrete: a review. Construction and Building Materials, 149. pp. 62-75. ISSN 0950-0618

X

Xiao, Xianglian and Chevali, Venkata S. and Song, Pingan and He, Dongning and Wang, Hao (2019) Polylactide/hemp hurd biocomposites as sustainable 3D printing feedstock. Composites Science and Technology, 184. pp. 1-8. ISSN 0266-3538

Xu, Shengduo and Hong, Min and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Wang, Yuan and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Bai, Yang and Wang, Lianzhou and Dargusch, Matthew and Zou, Jin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2019) High-Performance PEDOT: PSS Flexible Thermoelectric Materials and Their Devices by Triple Post-Treatments. Chemisty of Materials, 31 (14). pp. 5238-5244. ISSN 0897-4756

Xu, Shengduo and Hong, Min and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Wang, Yuan and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Bai, Yang and Wang, Lianzhou and Dargusch, Matthew and Zou, Jin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2019) High-Performance PEDOT:PSS Flexible Thermoelectric Materials and Their Devices by Triple Post-Treatments. Chemistry of Materials, 31 (14). pp. 5238-5244. ISSN 0897-4756

Xu, Zhiguang and Song, Pingan and Zhang, Jin and Guo, Qipeng and Mai, Yiu-wing (2018) Epoxy nanocomposites simultaneously strengthened and toughened by hybridization with graphene oxide and block ionomer. Composites Science and Technology, 168. pp. 363-370. ISSN 0266-3538

Xu, Li and Chen, Gaopan and Luo, Haimei and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Luo, Guihai and Pan, Guoshun (2018) Investigation of the chemical residuals on the fused silica during chemical mechanical polishing. ChemistrySelect, 3 (31). pp. 8930-8935.

Xia, Wen and He, Dongning and Fu, Yun-fei and Wei, Xiao-yi and Liu, Hong-chao and Ye, Jiang-ping and Liu, Yun-fei and Li, Ji-hua (2017) Advanced technology for nanostarches preparation by high speed jet and its mechanism analysis. Carbohydrate Polymers, 176. pp. 127-134. ISSN 0144-8617

Xiang, Ziru and Chan, Tommy H. T. and Thambiratnam, David P. and Nguyen, Andy (2017) Prestress and excitation force identification in a prestressed concrete box–girder bridge. Computers and Concrete, 20 (5). pp. 617-625. ISSN 1598-8198

Y

Yan, Shibo and Zeng, Xuesen and Long, Andrew (2020) Effect of fibre architecture on tensile pull-off behaviour of 3D woven composite T-joints. Composite Structures, 242:112194. pp. 1-9. ISSN 0263-8223

Yang, Yanling and Chen, Huajun and Zou, Xinxin and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Liu, Wei-Di and Feng, Lei and Suo, Guoquan and Hou, Xiaojiang and Ye, Xiaohui and Zhang, Li and Sun, Chenghua and Li, Haisheng and Wang, Changqing and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2020) Flexible Carbon-Fiber/Semimetal Bi Nanosheet Arrays as Separable and Recyclable Plasmonic Photocatalysts and Photoelectrocatalysts. ACS Applied Materials and Interfaces, 12 (22). pp. 24845-24854. ISSN 1944-8244

Yang, Tao and Zhang, Zuhua and Zhu, Huajun and Gao, Xuan and Dai, Chengdong and Wu, Qisheng (2019) Re-examining the suitability of high magnesium nickel slag as precursors for alkali-activated materials. Construction and Building Materials, 213. pp. 109-120. ISSN 0950-0618

Yang, Tao and Zhang, Zuhua and Zhu, Huajun and Zhang, Wei and Gao, Yanan and Zhang, Xiaocheng and Wu, Qisheng (2019) Effects of calcined dolomite addition on reaction kinetics of one-part sodium carbonate-activated slag cements. Construction and Building Materials, 211. pp. 329-336. ISSN 0950-0618

Yan, Shibo and Zeng, Xuesen and Long, Andrew (2019) Meso-scale modelling of 3D woven composite T-joints with weave variations. Composites Science and Technology, 171. pp. 171-179. ISSN 0266-3538

Yan, Shibo and Zeng, Xuesen and Long, Andrew (2018) Experimental assessment of the mechanical behaviour of 3D woven composite T-joints. Composites Part B: Engineering, 154. pp. 108-113. ISSN 1359-8368

Yang, Tao and Zhu, Huajun and Zhang, Zuhua and Gao, Xuan and Zhang, Changsen and Wu, Qisheng (2018) Effect of fly ash microsphere on the rheology and microstructure of alkali-activated fly ash/slag pastes. Cement and Concrete Research, 109. pp. 198-207. ISSN 0008-8846

Yin, Weida and Chen, Lei and Lu, Fengzhu and Song, Pingan and Dai, Jinfeng and Meng, Linghui (2018) Mechanically robust, flame-retardant poly(lactic acid) biocomposites via combining cellulose nanofibers and ammonium polyphosphate. ACS Omega, 3 (5). pp. 5615-5626. ISSN 2470-1343

Yan, Hongqiang and Li, Nannan and Cheng, Jie and Song, Pingan and Fang, Zhengping and Wang, Hao (2018) Fabrication of flame retardant benzoxazine semi-biocomposites reinforced by ramie fabrics with bio-based flame retardant coating. Polymer Composites, 39 (Spec. Iss., Suppl. 1). E480-E488. ISSN 0272-8397

Yang, Tao and Wu, Qisheng and Zhu, Huajun and Zhang, Zuhua (2017) Geopolymer with improved thermal stability by incorporating high-magnesium nickel slag. Construction and Building Materials, 155. pp. 475-484. ISSN 0950-0618

Yang, Tao and Zhu, Huajun and Zhang, Zuhua (2017) Influence of fly ash on the pore structure and shrinkage characteristics of metakaolin-based geopolymer pastes and mortars. Construction and Building Materials, 153. pp. 284-293. ISSN 0950-0618

Yang, Lei and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Hong, Min and Wang, Lihua and Kong, Deli and Huang, Liqing and Han, Guang and Zou, Yichao and Dargusch, Matthew and Zou, Jin (2017) n-type Bi-doped PbTe nanocubes with enhanced thermoelectric performance. Nano Energy, 31. pp. 105-112. ISSN 2211-2855

Z

Zhuang, Wei and Quan, Xuebo and Wang, Zhenfu and Zhou, Wenfeng and Yang, Pengpeng and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Villacorta Hernandez, Byron and Wu, Jinglan and Li, Ming and Zhou, Jian and Zhu, Chenjie and Ying, Hanjie (2020) Interfacial microenvironment for lipase immobilization: Regulating the heterogeneity of graphene oxide. Chemical Engineering Journal, 394:125038. pp. 1-13. ISSN 1385-8947

Zhang, Jin and Chevali, Venkata S. and Wang, Hao and Wang, Chun-Hui (2020) Current status of carbon fibre and carbon fibre composites recycling. Composites Part B: Engineering, 193:108053. pp. 1-15. ISSN 1359-8368

Zou, Xinxin and Yang, Yanling and Chen, Huajun and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Suo, Guoquan and Ye, Xiaohui and Zhang, Li and Hou, Xiaojiang and Feng, Lei and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2020) Tuning wall thickness of TiO2 microtubes for an enhanced photocatalytic activity with thickness-dependent charge separation efficiency. Journal of Colloid and Interface Science, 579. pp. 463-469. ISSN 0021-9797

Zhang, Jinxuan and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Zhu, Zhonghua (2020) Cracking behaviour and mechanism at grain boundary of gibbsite during calcination. Ceramics International, 46. pp. 12067-12072. ISSN 0272-8842

Zheng, Yunzhi and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Yuan, Hualei and Lu, Siyu and Qu, Xianlin and Liu, Wei-Di and Wang, Lihua and Zheng, Kun and Zou, Jin and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2020) A synergy of strain loading and laser radiation in determining the high-performing electrical transports in the single Cu-doped SnSe microbelt. Materials Today Physics, 13:100198. ISSN 2542-5293

Zanagan, Sartip and Epaarachchi, Jayantha and Ferdous, Wahid ORCID: https://orcid.org/0000-0002-4473-4722 and Leng, Jinsong (2020) A novel hybridised composite sandwich core with glass, kevlar and zylon fibres – investigation under low-velocity impact. International Journal of Impact Engineering, 137 (Article 103430). ISSN 0734-743X

Zhan, Hongquan and Deng, Ce and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Wu, Chuanqi and Li, Xiaohong and Xie, Zhipeng and Wang, Changan and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2020) Correlation between the photocatalysis and growth mechanism of SnO2 nanocrystals. Journal of Physics D: Applied Physics, 53 (15):154005. pp. 1-9. ISSN 0022-3727

Zhu, Huang and Deng, Jiuhong and Yang, Zhaopu and Deng, Yi and Yang, Weizhong and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2019) Facile synthesis and characterization of multifunctional cobalt-based nanocomposites for targeted chemo-photothermal synergistic cancer therapy. Composites Part B: Engineering, 178 (Article 107521). ISSN 1359-8368

Zhang, Jian and Shi, Caijiun and Zhang, Zuhua (2019) Chloride binding of alkali-activated slag/fly ash cements. Construction and Building Materials, 226 (30). pp. 21-31. ISSN 0950-0618

Zhang, Jian and Shi, Caijun and Zhang, Zuhua (2019) Carbonation induced phase evolution in alkali-activated slag/fly ash cements: The effect of silicate modulus of activators. Construction and Building Materials, 223. pp. 566-582. ISSN 0950-0618

Zhu, Huajun and Liang, Guangwei and Zhang, Zuhua and Wu, Qisheng and Du, Jianzhou (2019) Partial replacement of metakaolin with thermally treated rice husk ash in metakaolin-based geopolymer. Construction and Building Materials, 221. pp. 527-538. ISSN 0950-0618

Zhuang, Linzhou and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Liu, Hongli and Jiang, Zongrui and Jia, Yi and Li, Zhiheng and Yang, Dongjiang and Hocking, Rosalie K. and Li, Mengran and Zhang, Longzhou and Wang, Xing and Yao, Xiangdong and Zhu, Zhonghua (2019) A Surfactant‐Free and Scalable General Strategy for Synthesizing Ultrathin Two‐Dimensional Metal–Organic Framework Nanosheets for the Oxygen Evolution Reaction. Angewandte Chemie, 58. pp. 13565-13572. ISSN 0044-8249

Zhou, Wenfeng and Zhuang, Wei and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Wang, Zhenfu and Wu, Jinglan and Niu, Huanqing and Liu, Dong and Zhu, Chenjie and Chen, Yong and Ying, Hanjie (2019) Surface functionalization of graphene oxide by amino acids for Thermomyces lanuginosus lipase adsorption. Journal of Colloid and Interface Science, 546. pp. 211-220. ISSN 0021-9797

Zhan, Hongquan and Wu, Chuanqi and Deng, Ce and Li, Xiaohong and Xie, Zhipeng and Wang, Changan and Chen, Zhi-gang ORCID: https://orcid.org/0000-0002-9309-7993 (2019) Formation mechanism of titania based opacified glaze with novel core-shell nanostructure. Journal of the European Ceramic Society, 39 (4). pp. 1668-1674. ISSN 0955-2219

Zheng, Zhao and Ma, Xue and Zhang, Zuhua and Li, Yuxiang (2019) In-situ transition of amorphous gels to Na-P1 zeolite in geopolymer: Mechanical and adsorption properties. Construction and Building Materials, 202. pp. 851-860. ISSN 0950-0618

Zhuang, Wei and Huang, Jinsha and Liu, Xiaojing and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Niu, Huanqing and Wang, Zhenfu and Wu, Jinglan and Yang, Pengpeng and Chen, Yong and Ying, Hanjie (2019) Co-localization of glucose oxidase and catalase enabled by a self-assembly approach: matching between molecular dimensions and hierarchical pore sizes. Food Chemistry, 275. pp. 197-205. ISSN 0308-8146

Zhang, Xiaochun and Zhou, Zhezhe and Zhu, Yuding and Dai, Jinfeng and Yu, Youming and Song, Pingan (2019) High-pressure steam: a facile strategy for the scalable fabrication of flattened bamboo biomass. Industrial Crops and Products, 129. pp. 97-104. ISSN 0926-6690

Zhang, Zuhua and Zhu, Yingcan and Zhu, Huajun and Zhang, Yu and Provis, John L. and Wang, Hao (2019) Effect of drying procedures on pore structure and phase evolution of alkali-activated cements. Cement and Concrete Composites, 96. pp. 194-203. ISSN 0958-9465

Zhuang, Linzhou and Jia, Yi and Liu, Hongli and Wang, Xing and Hocking, Rosalie K. and Liu, Hongwei and Chen, Jun and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Zhang, Longzhou and Li, Mengran and Dong, Chung-Li and Huang, Yu-cheng and Chen, Shaohua and Yang, Dongjiang and Zhu, Zhonghua and Yao, Xiangdong (2019) Defect-induced Pt-Co-Se coordinated sites with highly asymmetrical electronic distribution for boosting oxygen-involving electrocatalysis. Advanced Materials, 31 (4 (1805581)). pp. 1-10. ISSN 0935-9648

Zhang, Jinxuan and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Boom, Eric and Zhu, Zhonghua (2019) Cracking behavior and mechanism of gibbsite crystallites during calcination. Crystal Research and Technology, 54 (1 - Article 1800201). ISSN 0232-1300

Zhang, Wei and Yao, Xiao and Yang, Tao and Zhang, Zuhua (2018) The degradation mechanisms of alkali-activated fly ash/slag blend cements exposed to sulphuric acid. Construction and Building Materials, 186. pp. 1177-1187. ISSN 0950-0618

Zhang, Zuhua and Provis, John L. and Reid, Andrew and Wang, Hao (2018) Efflorescence and subflorescence induced microstructural and mechanical evolution in fly ash-based geopolymers. Cement and Concrete Composites, 92. pp. 165-177. ISSN 0958-9465

Zhou, Tian and Wang, Lijun and Zheng, Shuqi and Hong, Min and Fang, Teng and Bai, Peng-Peng and Chang, Siyi and Cui, Wenlin and Shi, Xiaolei ORCID: https://orcid.org/0000-0003-0905-2547 and Zhao, Huaizhou and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 (2018) Self-assembled 3D flower-like hierarchical Ti-doped Cu3SbSe4 microspheres with ultralow thermal conductivity and high zT. Nano Energy, 49. pp. 221-229. ISSN 2211-2855

Zhang, Wei and Yao, Xiao and Yang, Tao and Liu, Cun and Zhang, Zuhua (2018) Increasing mechanical strength and acid resistance of geopolymers by incorporating different siliceous materials. Construction and Building Materials, 175. pp. 411-421. ISSN 0950-0618

Zou, Yi-Chao and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Aso, Kohei and Zhang, Chenxi and Kong, Fantai and Hong, Min and Matsumura, Syo and Cho, Kyeongjae and Zou, Jin (2018) Atomic insights into phase evolution in ternary transition-metal dichalcogenides nanostructures. Small, 14 (22 (1800780)). pp. 1-6. ISSN 1613-6810

Zong, Enmin and Huang, Guobo and Liu, Xiaohuan and Lei, Weiwei and Jiang, Shengtao and Ma, Zhongqing and Wang, Jifu and Song, Pingan (2018) A lignin-based nano-adsorbent for superfast and highly selective removal of phosphate. Journal of Materials Chemistry A, 6 (21). pp. 9971-9983. ISSN 2050-7488

Zhu, Qianqian and Zhuang, Wei and Niu, Huanqing and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Villacorta Hernandez, Byron and Wu, Jinglan and Wang, Kai and Liu, Dong and Chen, Yong and Zhu, Chenjie and Ying, Hanjie (2018) Affinity induced immobilization of adenylate cyclase from the crude cell lysate for ATP conversion. Colloids and Surfaces B: Biointerfaces, 164. pp. 155-164. ISSN 0927-7765

Zhang, Wei and Yao, Xiao and Yang, Tao and Zhang, Zuhua (2018) Effect of calcined dolomite addition on sodium carbonate-activated slag cements with different curing methods. Advances in Cement Research. pp. 1-12. ISSN 0951-7197

Zhang, Yu and Zhang, Zuhua and Li, Xuerun and Li, Weifeng and Shen, Xiaodong and Wang, Hao (2018) Effect of welan gum on the hydration and hardening of Portland cement. Journal of Thermal Analysis and Calorimetry, 131 (2). pp. 1277-1286. ISSN 1388-6150

Zou, Yi-Chao and Chen, Zhi-Gang ORCID: https://orcid.org/0000-0002-9309-7993 and Zhang, Enze and Kong, Fantai and Lu, Yan and Wang, Lihua and Drennan, John and Wang, Zhongchang and Xiu, Faxian and Cho, Kyeongjae and Zou, Jin (2018) Atomic disorders in layer structured topological insulator SnBi2Te4 nanoplates. Nano Research, 11 (2). pp. 696-706. ISSN 1998-0124

Zong, Enmin and Liu, Xiaohuan and Liu, Lina and Wang, Jifu and Song, Pingan and Ma, Zhongqing and Ding, Jie and Fu, Shenyuan (2018) Graft polymerization of acrylic monomers onto lignin with CaCl2-H2O2 as initiator: preparation, mechanism, characterization, and application in poly(lactic acid). ACS Sustainable Chemistry and Engineering, 6 (1). pp. 337-348.

Zhang, Jian and Shi, Caijun and Zhang, Zuhua and Ou, Zhihua (2017) Durability of alkali-activated materials in aggressive environments: A review on recent studies. Construction and Building Materials, 152. pp. 598-613. ISSN 0950-0618

Zhuang, Xianhuan and Song, Pingan and Chen, Guorong and Shi, Liyi and Wu, Yuan and Tao, Xinyong and Liu, Hongjiang and Zhang, Dengsong (2017) Coralloid-like nanostructured c-nSi/SiOx@Cy anodes for high performance lithium ion battery. ACS Applied Materials and Interfaces, 9 (34). pp. 28464-28472. ISSN 1944-8244

Zhang, Yu and Zhang, Zuhua and Shi, Chaoqi and Wang, Hao and Shen, Xiaodong (2017) Development of a new calcium sulfoaluminate (synthetic ye'elimite) blended PII 52.5 cement. Advances in Cement Research, 29 (9). pp. 373-386. ISSN 0951-7197

Zhuang, Linzhou and Ge, Lei ORCID: https://orcid.org/0000-0003-2989-0329 and Yang, Yisu and Li, Mengran and Jia, Yi and Yao, Xiangdong and Zhu, Zhonghua (2017) Ultrathin iron-cobalt oxides nanosheets with abundant oxygen vacancies for oxygen evolution reaction. Advanced Materials, 29 (17). p. 1606793. ISSN 0935-9648

Zhang, Zuhua and Zhu, Yingcan and Yang, Tao and Li, Liangfeng and Zhu, Huajun and Wang, Hao (2017) Conversion of local industrial wastes into greener cement through geopolymer technology: a case study of high-magnesium nickel slag. Journal of Cleaner Production, 141. pp. 463-471. ISSN 0959-6526

Zhou, Yan and Pan, Guoshun and Gong, Hua and Shi, Xiao-Lei ORCID: https://orcid.org/0000-0003-0905-2547 and Zou, Chunli (2017) Characterization of sapphire chemical mechanical polishing performances using silica with different sizes and their removal mechanisms. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 513. pp. 153-159. ISSN 0927-7757

This list was generated on Wed Aug 12 07:05:43 2020 AEST.