Items for Faculty/School / Institute/Centre :
Current - Institute for Advanced Engineering and Space Sciences - Centre for Future Materials (1 Jan 2017 -)

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors Name | Date | Item Type
Jump to: 2019 | 2018 | 2017
Number of items: 227.

2019

Al-saadi, Ali Umran and Aravinthan, Thiru and Lokuge, Weena (2019) Effects of fibre orientation and layup on the mechanical properties of the pultruded glass fibre reinforced polymer tubes. Engineering Structures, 198 (aRTICLE 109448). pp. 1-16. ISSN 0141-0296

Vasileff, Anthony and Zhi, Xing and Xu, Chaochen and Ge, Lei and Jiao, Yan and Zheng, Yao and Qiao, Shi-zhang (2019) Selectivity control for electrochemical CO2 reduction by charge redistribution on the surface of copper alloys. ACS Catalysis, 9 (10). pp. 9411-9417.

Wang, Yuan and Liu, Wei-Di and Gao, Han and Wang, Li-Jun and Li, Meng and Shi, Xiao-Lei and Hong, Min and Wang, Hao and Zou, Jin and Chen, Zhi-Gang (2019) High porosity in nanostructured n‑type Bi2Te3 obtaining ultralow lattice thermal conductivity. ACS Applied Materials and Interfaces, 11. pp. 31237-31244. ISSN 1944-8244

Chen, Zhen and Chan, Tommy H.T. and Nguyen, Andy and Yu, Ling (2019) Identification of vehicle axle loads from bridge responses using preconditioned least square QR-factorization algorithm. Mechanical Systems and Signal Processing, 128. pp. 479-496. ISSN 0888-3270

Dong, Minhao and Lokuge, Weena and Elchalakani, Mohamed and Karrech, Ali (2019) Modelling glass fibre-reinforced polymer reinforced geopolymer concrete columns. Structures, 20. pp. 813-821. ISSN 2352-0124

Ge, Lei and Soares, Fabio Terzini and Mahoney, Shilo and Hamilton, Christopher and Khan, Chawarwan and Steel, Karen and Rufford, Thomas E. and Rudolph, Victor (2019) Effect of oxidation and silane surface treatments of coal powders on relative permeability in packed coal beds. Journal of Natural Gas Science and Engineering, 69 (102931). pp. 1-9. ISSN 1875-5100

Hizam, R. M. and Manalo, Allan C. and Karunasena, Warna and Bai, Yu (2019) Behaviour of pultruded GFRP truss system connected using through-bolt with mechanical insert. Composites Part B: Engineering, 168. pp. 44-57. ISSN 1359-8368

Wang, Yuan and Yang, Lei and Shi, Xiao-Lei and Shi, Xun and Chen, Li-Dong and Dargusch, Matthew S. and Zou, Jin and Chen, Zhi-Gang (2019) Flexible thermoelectric materials and generators: challenges and innovations. Advanced Materials, 31 (29 - Article 1807916). pp. 1-47. ISSN 0935-9648

Wang, Yanru and Cao, Yubin and Zhang, Peng and Ma, Yuwei and Zhao, Tiejun and Wang, Hao and Zhang, Zuhua (2019) Water absorption and chloride diffusivity of concrete under the coupling effect of uniaxial compressive load and freeze-thaw cycles. Construction and Building Materials, 209. pp. 566-576. ISSN 0950-0618

Ren, Fei and Ge, Lei and Stelmashuk, Vitaliy and Rufford, Thomas E. and Xing, Huilin and Rudolph, Victor (2019) Characterisation and evaluation of shockwave generation in water conditions for coal fracturing. Journal of Natural Gas Science and Engineering, 66. pp. 255-264. ISSN 1875-5100

Herath, H. M. C. M. and Epaarachchi, J. A. and Islam, M. M. and Leng, J. (2019) Carbon fibre reinforced shape memory polymer composites for deployable space habitats. Engineer, LII (1). pp. 1-9.

Raza, Syed Shabbar and Ge, Lei and Rufford, Thomas E. and Chen, Zhongwei and Rudolph, Victor (2019) Anisotropic coal permeability estimation by determining cleat compressibility using mercury intrusion porosimetry and stress–strain measurements. International Journal of Coal Geology, 205. pp. 75-86. ISSN 0166-5162

Ren, Fei and Ge, Lei and Arami-Niya, Arash and Rufford, Thomas E. and Xing, Huilin and Rudolph, Victor (2019) Gas storage potential and electrohydraulic discharge (EHD) stimulation of coal seam interburden from the Surat Basin. International Journal of Coal Geology, 208. pp. 24-36. ISSN 0166-5162

Hong, Min and Zou, Jin and Chen, Zhi-Gang (2019) Thermoelectric GeTe with diverse degrees of freedom having secured superhigh performance. Advanced Materials, 31 (14 (1807071)). pp. 1-23. ISSN 0935-9648

Zhan, Hongquan and Wu, Chuanqi and Deng, Ce and Li, Xiaohong and Xie, Zhipeng and Wang, Changan and Chen, Zhi-gang (2019) Formation mechanism of titania based opacified glaze with novel core-shell nanostructure. Journal of the European Ceramic Society, 39 (4). pp. 1668-1674. ISSN 0955-2219

Hu, Hai-Long and Pham, Anh and Chen, Zhigang and Duty, Timothy and Wang, Danyang and Li, Sean (2019) Enhanced mobility in LaAlO3/SrTiO3 heterostructures with layer-modulated patterning. Ceramics International, 45 (5). pp. 5496-5502. ISSN 0272-8842

Moudood, Abul and Rahman, Anisur and Ochsner, Andreas and Islam, Mainul and Francucci, Gaston (2019) Flax fiber and its composites: an overview of water and moisture absorption impact on their performance. Journal of Reinforced Plastics and Composites, 38 (7). pp. 323-339. ISSN 0731-6844

Gao, Shuai and Ge, Lei and Villacorta, Byron S. and Rufford, Thomas E. and Zhu, Zhonghua (2019) Carbon monoliths by assembling carbon spheres for gas adsorption. Industrial & Engineering Chemistry Research, 58 (12). pp. 4957-4969. ISSN 0888-5885

Ferdous, Wahid and Bai, Yu and Ngo, Tuan Duc and Manalo, Allan and Mendis, Priyan (2019) New advancements, challenges and opportunities of multi-storey modular buildings – a state-of-the-art review. Engineering Structures, 183. pp. 883-893. ISSN 0141-0296

Liu, Shi-Jian and Zou, Yi-Chao and Shi, Xiao-Lei and Li, Qi-Zhen and Yang, Yu-Zhe and Liu, Wei-Di and Chen, Zhi-Gang and Zou, Jin (2019) Vapour-solid growth of MoxW1-xTe2 nanobelts by a facile chemical vapour deposition method. Journal of Alloys and Compounds, 777. pp. 926-930. ISSN 0925-8388

Zhuang, Wei and Huang, Jinsha and Liu, Xiaojing and Ge, Lei and Niu, Huanqing and Wang, Zhenfu and Wu, Jinglan and Yang, Pengpeng and Chen, Yong and Ying, Hanjie (2019) Co-localization of glucose oxidase and catalase enabled by a self-assembly approach: matching between molecular dimensions and hierarchical pore sizes. Food Chemistry, 275. pp. 197-205. ISSN 0308-8146

Chen, Guorong and An, Juan and Meng, Yiming and Yuan, Changzhou and Matthews, Bryan and Dou, Fei and Shi, Liyi and Zhou, Yongfeng and Song, Pingan and Wu, Gang and Zhang, Dengsong (2019) Cation and anion Co-doping synergy to improve structural stability of Li-and Mn-rich layered cathode materials for lithium-ion batteries. Nano Energy, 57. pp. 157-165. ISSN 2211-2855

Zhang, Xiaochun and Zhou, Zhezhe and Zhu, Yuding and Dai, Jinfeng and Yu, Youming and Song, Pingan (2019) High-pressure steam: a facile strategy for the scalable fabrication of flattened bamboo biomass. Industrial Crops and Products, 129. pp. 97-104. ISSN 0926-6690

Lokuge, Weena and Abousnina, Rajab and Herath, Nilupa (2019) Behaviour of geopolymer concrete filled pultruded GFRP short columns. Journal of Composite Materials. ISSN 0021-9983

Tran, Xuan Quy and Hong, Min and Maeno, Hiroshi and Kawami, Youichirou and Toriyama, Takaaki and Jack, Kevin and Chen, Zhi-Gang and Zou, Jin and Matsumura, Syo and Dargusch, Matthew S. (2019) Real-time observation of the thermally-induced phase transformation in GeTe and its thermal expansion properties. Acta Materialia, 165. pp. 327-335. ISSN 1359-6454

Yan, Shibo and Zeng, Xuesen and Long, Andrew (2019) Meso-scale modelling of 3D woven composite T-joints with weave variations. Composites Science and Technology, 171. pp. 171-179. ISSN 0266-3538

Deng, Yi and Zhang, Kewei and Yang, Yuanyi and Shi, Xiuyuan and Yang, Lei and Yang, Weizhong and Wang, Yuan and Chen, Zhi-Gang (2019) Ce/Mn dual-doped LaAlO3 ceramics with enhanced far-infrared emission capability synthesized via a facile microwave sintering method. Journal of Alloys and Compounds, 774. pp. 434-442. ISSN 0925-8388

Lokuge, Weena and Wilson, Matthew and Tran, Huu and Setunge, Sujeeva (2019) Predicting the probability of failure of timber bridges using fault tree analysis. Structure and Infrastructure Engineering. ISSN 1573-2479

Wang, Zhanke and Ge, Lei and Li, Mengran and Lin, Rijia and Wang, Hao and Zhu, Zhonghua (2019) Orientated growth of copper-based MOF for acetylene storage. Chemical Engineering Journal, 357. pp. 320-327. ISSN 1385-8947

Le, N. T. and Thambiratnam, D. P. and Nguyen, A. and Chan, T. H. T (2019) A new method for locating and quantifying damage in beams from static deflection changes. Engineering Structures, 180 (2019). pp. 779-792. ISSN 0141-0296

Zhang, Zuhua and Zhu, Yingcan and Zhu, Huajun and Zhang, Yu and Provis, John L. and Wang, Hao (2019) Effect of drying procedures on pore structure and phase evolution of alkali-activated cements. Cement and Concrete Composites, 96. pp. 194-203. ISSN 0958-9465

Li, Yue and Jin, Cailan and Peng, Yuelian and An, Quanfu and Chen, Zhengping and Zhang, Jiacheng and Ge, Lei and Wang, Shaobin (2019) Fabrication of PVDF hollow fiber membranes via integrated phase separation for membrane distillation. Journal of the Taiwan Institute of Chemical Engineers, 95. pp. 487-494. ISSN 1876-1070

Li, Xuwei and Yang, Guanyu and Nemcik, Jan and Mirzaghorbanali, Ali and Aziz, Naj (2019) Numerical investigation of the shear behaviour of a cable bolt in single shear test. Tunnelling and Underground Space Technology, 84. pp. 227-236. ISSN 0886-7798

Hong, Min and Wang, Yuan and Feng, Tianli and Sun, Qiang and Xu, Shengduo and Matsumura, Syo and Pantelides, Sokrates T. and Zou, Jin and Chen, Zhi-Gang (2019) Strong phonon–phonon interactions securing extraordinary thermoelectric Ge1–xSbxTe with Zn-alloying-induced band alignment. Journal of the American Chemical Society, 141 (4). pp. 1742-1748.

Shi, Xiaolei and Wu, Angyin and Feng, Tianli and Zheng, Kun and Liu, Weidi and Sun, Qiang and Hong, Min and Pantelides, Sokrates T. and Chen, Zhi-Gang and Zou, Jin (2019) High thermoelectric performance in p-type polycrystalline Cd-doped SnSe achieved by a combination of cation vacancies and localized lattice engineering. Advanced Energy Materials, 9 (11 - Article 180352). pp. 1-15. ISSN 1614-6832

Zhuang, Linzhou and Jia, Yi and Liu, Hongli and Wang, Xing and Hocking, Rosalie K. and Liu, Hongwei and Chen, Jun and Ge, Lei and Zhang, Longzhou and Li, Mengran and Dong, Chung-Li and Huang, Yu-cheng and Chen, Shaohua and Yang, Dongjiang and Zhu, Zhonghua and Yao, Xiangdong (2019) Defect-induced Pt-Co-Se coordinated sites with highly asymmetrical electronic distribution for boosting oxygen-involving electrocatalysis. Advanced Materials, 31 (4 (1805581)). pp. 1-10. ISSN 0935-9648

Jayasundara, Nirmani and Thambiratnam, David and Chan, Tommy and Nguyen, Andy (2019) Vibration-based dual-criteria approach for damage detection in arch bridges. Structural Health Monitoring. ISSN 1475-9217

Nguyen, Andy and Chan, Tommy H. T. and Zhu, Xinqun (2019) Special issue: real world application of SHM in Australia. Structural Health Monitoring, 18 (1). pp. 3-4. ISSN 1475-9217

Zhang, Jinxuan and Ge, Lei and Chen, Zhi-Gang and Boom, Eric and Zhu, Zhonghua (2019) Cracking behavior and mechanism of gibbsite crystallites during calcination. Crystal Research and Technology, 54 (1 - Article 1800201). ISSN 0232-1300

Albdiry, M. T. and Yousif, B. F. (2019) Toughening of brittle polyester with functionalized halloysite nanocomposites. Composites Part B: Engineering, 160. pp. 94-109. ISSN 1359-8368

2018

Liu, Weidi and Shi, Xiaolei and Hong, Min and Yang, Lei and Moshwan, Raza and Chen, Zhi-Gang and Zou, Jin (2018) Ag doping induced abnormal lattice thermal conductivity in Cu2Se. Journal of Materials Chemistry C, 6 (48). pp. 13225-13231. ISSN 2050-7526

Cao, Ruilin and Li, Baoliang and You, Nanqiao and Zhang, Yamei and Zhang, Zuhua (2018) Properties of alkali-activated ground granulated blast furnace slag blended with ferronickel slag. Construction and Building Materials, 192. 123-132. ISSN 0950-0618

Ferdous, Wahid and Ngo, Tuan Duc and Nguyen, Kate T. Q. and Ghazlan, Abdallah and Mendis, Priyan and Manalo, Allan (2018) Effect of fire-retardant ceram powder on the properties of phenolic-based GFRP composites. Composites Part B: Engineering, 155. pp. 414-424. ISSN 1359-8368

Ferdous, Wahid and Almutairi, Ahmed D. and Huang, Yuan and Bai, Yu (2018) Short-term flexural behaviour of concrete filled pultruded GFRP cellular and tubular sections with pin-eye connections for modular retaining wall construction. Composite Structures, 206. pp. 1-10. ISSN 0263-8223

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2018) Thermal expansion properties of fused borosilicate syntactic foams. Nano Hybrids and Composites, 23. pp. 39-45. ISSN 2297-3400

Yan, Shibo and Zeng, Xuesen and Long, Andrew (2018) Experimental assessment of the mechanical behaviour of 3D woven composite T-joints. Composites Part B: Engineering, 154. pp. 108-113. ISSN 1359-8368

Benmokrane, Brahim and Nazair, Claude and Loranger, Marc-Antoine and Manalo, Allan (2018) Field durability study of vinyl-ester-based GFRP rebars in concrete bridge barriers. Journal of Bridge Engineering, 23 (12 - Article 0401809). pp. 1-13. ISSN 1084-0702

Fang, Fang and Song, Pingan and Ran, Shiya and Guo, Zhenghong and Wang, Hao and Fang, Zhenping (2018) A facile way to prepare phosphorus-Nitrogen-Functionalized graphene oxide for enhancing the flame retardancy of epoxy resin. Composites Communications, 10. pp. 97-102. ISSN 2452-2139

Deng, Yi and Gong, B. and Chao, Y. and Dong, T. and Yang, W. and Hong, Min and Shi, X. and Wang, G. and Jin, Y. and Chen, Z.-G. (2018) Sustainable utilization of municipal solid waste i incineration fly ash for ceramic bricks with eco-friendly biosafety. Materials Today Sustainability, 1-2. pp. 32-38. ISSN 2589-2347

Shi, Xiaolei and Wu, Angyin and Liu, Weidi and Moshwan, Raza and Wang, Yuan and Chen, Zhi-Gang and Zou, Jin (2018) Polycrystalline SnSe with extraordinary thermoelectric property via nanoporous design. ACS Nano, 12 (11). pp. 11417-11425. ISSN 1936-0851

Liu, Xiaohuan and Zong, Enmin and Hu, Weijie and Song, Pingan and Wang, Jifu and Liu, Qingchun and Ma, Zhongqing and Fu, Shenyuan (2018) Lignin-derived porous carbon loaded with La(OH)3 nanorods for highly efficient removal of phosphate. ACS Sustainable Chemistry and Engineering, 7 (1). pp. 758-768. ISSN 2168-0485

Shang, Hong-Jing and Ding, Fa-Zhu and Deng, Yuan and Zhang, He and Dong, Ze-Bin and Xu, Wen-Juan and Huang, Da-Xing and Gu, Hong-Wei and Chen, Zhi-Gang (2018) Highly (00l)-oriented Bi2Te3/Te heterostructure thin films with enhanced power factor. Nanoscale, 10 (43). pp. 20189-20195. ISSN 2040-3364

Liu, Yi and Yan, Chunjie and Zhao, Junjie and Zhang, Zuhua and Wang, Hongquan and Zhou, Sen and Wu, Linmei (2018) Synthesis of zeolite P1 from fly ash under solvent-free conditions for ammonium removal from water. Journal of Cleaner Production, 202. pp. 11-22. ISSN 0959-6526

Al-saadi, Ali Umran and Aravinthan, Thiru and Lokuge, Weena (2018) Structural applications of fibre reinforced polymer (FRP) composite tubes: a review of columns members. Composite Structures, 204. pp. 513-524. ISSN 0263-8223

Xu, Zhiguang and Song, Pingan and Zhang, Jin and Guo, Qipeng and Mai, Yiu-wing (2018) Epoxy nanocomposites simultaneously strengthened and toughened by hybridization with graphene oxide and block ionomer. Composites Science and Technology, 168. pp. 363-370. ISSN 0266-3538

Nguyen, Khac-Duy and Chan, Tommy H. T. and Thambiratnam, David P. and Nguyen, Andy (2018) Damage identification in a complex truss structure using modal characteristics correlation method and sensitivity-weighted search space. Structural Health Monitoring. ISSN 1475-9217

Jamali, Shojaeddin and Chan, Tommy H. T. and Nguyen, Andy and Thambiratnam, David P. (2018) Reliability-based load carrying capacity assessment of bridges using structural health monitoring and nonlinear analysis. Structural Health Monitoring. ISSN 1475-9217

Viet, N. V. and Zaki, W. and Umer, R. (2018) Analytical model of functionally graded material/shape memory alloy composite cantilever beam under bending. Composite Structures, 203. pp. 764-776. ISSN 0263-8223

Abousnina, Rajab and Manalo, Allan and Lokuge, Weena and Al-Jabri, Khalifa (2018) Properties and structural behavior of concrete containing fine sand contaminated with light crude oil. Construction and Building Materials, 189. pp. 1214-1231. ISSN 0950-0618

Shi, Zhenguo and Shi, Caijun and Wan, Shu and Li, Ning and Zhang, Zuhua (2018) Effect of alkali dosage and silicate modulus on carbonation of alkali-activated slag mortars. Cement and Concrete Research, 113. pp. 55-64. ISSN 0008-8846

Wang, Aiguo and Lyu, Bangcheng and Zhang, Zuhua and Liu, Kaiwei and Xu, Haiyan and Sun, Daosheng (2018) The development of coral concretes and their upgrading technologies: a critical review. Construction and Building Materials, 187. pp. 1004-1019. ISSN 0950-0618

Hong, Min and Wang, Yuan and Liu, Weidi and Matsumura, Syo and Wang, Hao and Zou, Jin and Chen, Zhi-Gang (2018) Arrays of planar vacancies in superior thermoelectric Ge1−x−yCdxBiyTe with band convergence. Advanced Energy Materials, 8 (30 - Article 1801837). ISSN 1614-6832

Herath, H. M .C. M. and Epaarachchi, J. A. and Islam, M. M. and Al-Azzawi, W. and Leng, J. and Zhang, F. (2018) Structural performance and photothermal recovery of carbon fibre reinforced shape memory polymer. Composites Science and Technology, 167. pp. 206-214. ISSN 0266-3538

Moshwan, Raza and Shi, Xiao-Lei and Liu, Wei-Di and Yang, Lei and Wang, Yuan and Hong, Min and Auchterlonie, Graeme and Zou, Jin and Chen, Zhi-Gang (2018) High thermoelectric performance in sintered octahedron-shaped Sn(CdIn)xTe1+2x microcrystals. ACS Applied Materials and Interfaces, 10 (45). pp. 38944-38952. ISSN 1944-8244

Shi, Xiaolei and Zheng, Kun and Hong, Min and Liu, Weidi and Moshwan, Raza and Wang, Yuan and Qu, Xianlin and Chen, Zhi-Gang and Zou, Jin (2018) Boosting the thermoelectric performance of p-type heavily Cu-doped polycrystalline SnSe via inducing intensive crystal imperfections and defect phonon scattering. Chemical Science, 9 (37). pp. 7376-7389. ISSN 2041-6520

Li, Ning and Shi, Caijun and Zhang, Zuhua and Zhu, Deju and Hwang, Hyeon-Jong and Zhu, Yuhan and Sun, Tengjiao (2018) A mixture proportioning method for the development of performance-based alkali-activated slag-based concrete. Cement and Concrete Composites, 93. pp. 163-174. ISSN 0958-9465

Zhang, Wei and Yao, Xiao and Yang, Tao and Zhang, Zuhua (2018) The degradation mechanisms of alkali-activated fly ash/slag blend cements exposed to sulphuric acid. Construction and Building Materials, 186. pp. 1177-1187. ISSN 0950-0618

Wahalathantri, Buddhi and Lokuge, Weena and Karunasena, Warna and Setunge, Sujeeva (2018) Quantitative assessment of flood discharges and floodway failures through cross-cultivation of advancement in knowledge and traditional practices. International Journal of Disaster Resilience in the Built Environment, 9 (4-5). pp. 435-456. ISSN 1759-5908

Nguyen, Andy and Kodikara, K. A. Tharindu Lakshitha and Chan, Tommy H. T. and Thambiratnam, David P. (2018) Deterioration assessment of buildings using an improved hybrid model updating approach and long-term health monitoring data. Structural Health Monitoring. ISSN 1475-9217

Song, Pingan and Dai, Jinfeng and Chen, Guorong and Yu, Youming and Fang, Zhengping and Lei, Weiwei and Fu, Shenyuan and Wang, Hao and Chen, Zhi-Gang (2018) Bioinspired design of strong, tough, and thermally stable polymeric materials via nanoconfinement. ACS Nano, 12 (9). pp. 9266-9278. ISSN 1936-0851

Wang, Chunyan and Wang, Shengnan and Yang, Yuanyi and Jiang, Zhuo and Deng, Yi and Song, Shaoli and Yang, Weizhong and Chen, Zhi-Gang (2018) Bioinspired, biocompatible and peptide-decorated silk fibroin coatings for enhanced osteogenesis of bioinert implant. Journal of Biomaterials Science, Polymer Edition, 29 (13). pp. 1595-1611. ISSN 0920-5063

Huang, Zhong-Yue and Zhang, He and Yang, Lei and Zhu, Bin and Zheng, Kun and Hong, Min and Yu, Yuan and Zu, Fang-Qiu and Zou, Jin and Chen, Zhi-Gang (2018) Achieving high thermoelectric performance of Ni/Cu modified Bi0.5Sb1.5Te3 composites by a facile electroless plating. Materials Today Energy, 9. pp. 383-390. ISSN 2468-6069

Shi, Zhenguo and Shi, Caijun and Wan, Shu and Zhang, Zuhua (2018) Effects of alkali dosage and silicate modulus on alkali-silica reaction in alkali-activated slag mortars. Cement and Concrete Research, 111. pp. 104-115. ISSN 0008-8846

Zhang, Zuhua and Provis, John L. and Reid, Andrew and Wang, Hao (2018) Efflorescence and subflorescence induced microstructural and mechanical evolution in fly ash-based geopolymers. Cement and Concrete Composites, 92. pp. 165-177. ISSN 0958-9465

Liu, Weidi and Shi, Xiaolei and Moshwan, Raza and Hong, Min and Yang, Lei and Chen, Zhi-Gang and Zou, Jin (2018) Enhancing thermoelectric performance of (Cu1-xAgx)2Se via CuAgSe secondary phase and porous design. Sustainable Materials and Technologies, 17 (e00076). pp. 1-8. ISSN 2214-9929

Misnon, M. I. and Islam, M. M. and Epaarachchi, J. A. and Chen, H. and Goda, K. and Khan, M. T. I. (2018) Flammability characteristics of chemical treated woven hemp fabric reinforced vinyl ester composites. Science and Technology of Materials, 30 (3). pp. 174-188. ISSN 2603-6363

Al Azzawi, Wessam and Epaarachchi, J. A. and Leng, Jinsong (2018) Investigation of ultraviolet radiation effects on thermomechanical properties and shape memory behaviour of styrene-based shape memory polymers and its composite. Composites Science and Technology, 165. pp. 266-273. ISSN 0266-3538

Hizam, R. M. and Manalo, Allan C. and Karunasena, Warna and Bai, Yu (2018) Effect of bolt threads on the double lap joint strength of pultruded fibre reinforced polymer composite materials. Construction and Building Materials, 181. pp. 185-198. ISSN 0950-0618

Viet, N. V. and Zaki, W. and Umer, R. (2018) Bending models for superelastic shape memory alloy laminated composite cantilever beams with elastic core layer. Composites Part B, 147. pp. 86-103. ISSN 1359-8368

Monavari, Benyamin and Chan, Tommy H. T. and Nguyen, Andy and Thambiratnam, David P. (2018) Structural deterioration detection using enhanced autoregressive residuals. International Journal of Structural Stability and Dynamics, 18 (12 - Article 1850160). ISSN 0219-4554

Gao, Shuai and Villacorta, Byron S. and Ge, Lei and Steel, Karen and Rufford, Thomas E. and Zhu, Zhonghua (2018) Effect of rheological properties of mesophase pitch and coal mixtures on pore development in activated carbon discs with high compressive strength. Fuel Processing Technology, 177. pp. 219-227. ISSN 0378-3820

Chen, Zhi-Gang and Shi, Xiaolei and Zhao, Li-Dong and Zou, Jin (2018) High-performance SnSe thermoelectric materials: progress and future challenge. Progress in Materials Science, 97. pp. 283-346. ISSN 0079-6425

Hong, Min and Chen, Zhi-Gang and Matsumura, Syo and Zou, Jin (2018) Nano-scale dislocations induced by self-vacancy engineering yielding extraordinary n-type thermoelectric Pb0.96-yInySe. Nano Energy, 50. pp. 785-793. ISSN 2211-2855

Bode, Rajesh Reddy and Islam, Md Mainul and Mahmood, Muhammad Nateque (2018) Compression and flexural properties of ground macadamia nutshell particulate composites. In: 11th Asian-Australasian Conference on Composite Materials (ACCM-11), 29 July - 1 August 2018, Cairns, Australia.

Shi, Xiao-Lei and Zheng, Kun and Liu, Wei-Di and Wang, Yuan and Yang, Yu-Zhe and Chen, Zhi-Gang and Zou, Jin (2018) Realizing high thermoelectric performance in n-type highly distorted Sb-doped SnSe nicroplates via tuning high electron concentration and inducing intensive crystal defects. Advanced Energy Materials, 8 (21 - Article 1800775). ISSN 1614-6832

Hu, Hai-Long and Wang, Danyang and Tseng, Allen and Chen, Zhigang and Kong, Charlie and Yi, Jiabao and Li, Sean (2018) Thickness dependence of magnetic behavior of LaAlO3/SrTiO3 heterostructures. Advanced Materials Interfaces, 5 (13 - Article 1800352).

Jamali, Shojaeddin and Chan, Tommy H. T. and Koo, Ki-Young and Nguyen, Andy and Thambiratnam, David P. (2018) Capacity estimation of beam-like structures using substructural method. International Journal of Structural Stability and Dynamics, 18 (12 - Article 1850162). ISSN 0219-4554

Liu, Wei-Di and Chen, Zhi-Gang and Zou, Jin (2018) Eco-friendly higher manganese silicide thermoelectric materials: progress and future challenges. Advanced Energy Materials, 8 (19 - Article 1800056). ISSN 1614-6832

Deng, Yi and Yang, Lei and Huang, Xiaobing and Chen, Junhong and Shi, Xiuyuan and Yang, Weizhong and Hong, Min and Wang, Yuan and Dargusch, Matthew and Chen, Zhi-Gang (2018) Dual Ag/ZnO-decorated micro-/nanoporous sulfonated polyetheretherketone with superior antibacterial capability and biocompatibility via layer-by-layer self-assembly strategy. Macromolecular Bioscience, 18 (7 (1800028)). pp. 1-12. ISSN 1616-5187

Yang, Tao and Zhu, Huajun and Zhang, Zuhua and Gao, Xuan and Zhang, Changsen and Wu, Qisheng (2018) Effect of fly ash microsphere on the rheology and microstructure of alkali-activated fly ash/slag pastes. Cement and Concrete Research, 109. pp. 198-207. ISSN 0008-8846

Abousnina, Rajab and Manalo, Allan and Lokuge, Weena and Zhang, Zuhua (2018) Effects of light crude oil contamination on the physical and mechanical properties of geopolymer cement mortar. Cement and Concrete Composites, 90. pp. 136-149. ISSN 0958-9465

Kakei, Ayad and Epaarachchi, J. A. and Islam, Mainul and Leng, J. (2018) Evaluation of delamination crack tip in woven fibre glass reinforced polymer composite using FBG sensor spectra and thermo-elastic response. Measurement, 122. pp. 178-185. ISSN 0263-2241

Song, Chengsheng and Zhou, Dali and Yang, Lei and Zhou, Jiabei and Liu, Can and Chen, Zhi-Gang (2018) Recovery TiO2 and sodium titanate nanowires as Cd(II) adsorbent from waste V2O5-WO3/TiO2 selective catalytic reduction catalysts by Na2CO3-NaCl-KCl molten salt roasting method. Journal of the Taiwan Institute of Chemical Engineers, 88. pp. 226-233. ISSN 1876-1070

Zhou, Tian and Wang, Lijun and Zheng, Shuqi and Hong, Min and Fang, Teng and Bai, Peng-Peng and Chang, Siyi and Cui, Wenlin and Shi, Xiaolei and Zhao, Huaizhou and Chen, Zhi-Gang (2018) Self-assembled 3D flower-like hierarchical Ti-doped Cu3SbSe4 microspheres with ultralow thermal conductivity and high zT. Nano Energy, 49. pp. 221-229. ISSN 2211-2855

Ren, Fei and Ge, Lei and Rufford, Thomas E. and Xing, Huilin and Rudolph, Victor (2018) Permeability enhancement of coal by chemical-free fracturing using high-voltage electrohydraulic discharge. Journal of Natural Gas Science and Engineering, 57. pp. 1-10. ISSN 1875-5100

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Khan, Md Tawhidul Islam (2018) Effects of water absorption on mechanical properties of glass microballoons/vinyl ester syntactic foams. Research and Reviews in Materials Science and Chemistry, 8 (1). pp. 59-119.

Ferdous, Wahid and Bai, Yu and Almutairi, Ahmed D. and Satasivam, Sindu and Jeske, Juri (2018) Modular assembly of water-retaining walls using GFRP hollow profiles: Components and connection performance. Composite Structures, 194. pp. 1-11. ISSN 0263-8223

Wang, Xixi and Ge, Lei and Zhu, Yinlong and Dai, Jie and Zhou, Wei and Shao, Zongping (2018) Silver-perovskite hybrid electrocatalysts for oxygen reduction reaction in alkaline media. Journal of the Electrochemical Society, 165 (9). H524-H529. ISSN 0013-4651

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru and Fam, Amir (2018) Flexural and shear behaviour of layered sandwich beams. Construction and Building Materials, 173. pp. 429-442. ISSN 0950-0618

Huang, Guobo and Han, Deman and Jin, Yanxian and Song, Pingan and Yan, Qidong and Gao, Chao (2018) Fabrication of nitrogen-doped graphene decorated with organophosphor and lanthanum towards high-performance polymer nanocomposites. ACS Applied Nano Materials, 1. pp. 3204-3213. ISSN 2574-0970

Qiu, Haoran and Peng, Yuelian and Ge, Lei and Villacorta Hernandez, Byron and Zhu, Zhonghua (2018) Enhanced anti-fouling property in membrane distillation by pore channel surface modification. Applied Surface Science, 443. pp. 217-226. ISSN 0169-4332

Ouyang, Ling and Deng, Yi and Yang, Lei and Shi, Xiuyuan and Dong, Taosheng and Tai, Youyi and Yang, Weizhong and Chen, Zhi-Gang (2018) Graphene-oxide-decorated microporous polyetheretherketone with superior antibacterial capability and in vitro osteogenesis for orthopedic implant. Macromolecular Bioscience, 18 (6 - Article 1800036). ISSN 1616-5187

Zhang, Wei and Yao, Xiao and Yang, Tao and Liu, Cun and Zhang, Zuhua (2018) Increasing mechanical strength and acid resistance of geopolymers by incorporating different siliceous materials. Construction and Building Materials, 175. pp. 411-421. ISSN 0950-0618

Schubel, P. and Umer, R. and Boateng, E. K. G. (2018) Modelling heat transfer through an FBG optical fibre. Composites Part A : Applied Science and Manufacturing, 109. pp. 184-196. ISSN 1359-835X

Mohammed, Ali A. and Manalo, Allan C. and Maranan, Ginghis B. and Zhuge, Yan and Vijay, P. V. (2018) Comparative study on the behaviour of different infill materials for pre-fabricated fibre composite repair systems. Construction and Building Materials, 172. pp. 770-780. ISSN 0950-0618

Zou, Yi-Chao and Chen, Zhi-Gang and Aso, Kohei and Zhang, Chenxi and Kong, Fantai and Hong, Min and Matsumura, Syo and Cho, Kyeongjae and Zou, Jin (2018) Atomic insights into phase evolution in ternary transition-metal dichalcogenides nanostructures. Small, 14 (22 (1800780)). pp. 1-6. ISSN 1613-6810

Aziz, N. and Mirzaghorbanali, A. and Yang, G. and Khaleghparast, S. and Rasekh, H. (2018) Innovative approach to strata reinforcement in coal mines with reference to evaluation cable bolts shear strength. Journal of Mining and Environment, 9 (3). pp. 703-715. ISSN 2251-8592

Yin, Weida and Chen, Lei and Lu, Fengzhu and Song, Pingan and Dai, Jinfeng and Meng, Linghui (2018) Mechanically robust, flame-retardant poly(lactic acid) biocomposites via combining cellulose nanofibers and ammonium polyphosphate. ACS Omega, 3 (5). pp. 5615-5626. ISSN 2470-1343

Wang, Y. and Thambiratnam, D. P. and Chan, T. H. T. and Nguyen, A. (2018) Damage detection in asymmetric buildings using vibration-based techniques. Structural Control and Health Monitoring, 25 (5). pp. 1-19. ISSN 1545-2255

Liu, Qiufang and Qian, Yuyi and Li, Panli and Zhang, Sihang and Wang, Zerong and Liu, Jianjun and Sun, Xiaoguang and Fulham, Michael and Feng, Dagan and Chen, Zhigang and Song, Shaoli and Lu, Wei and Huang, Gang (2018) The combined therapeutic effects of 131 iodine-labeled multifunctional copper sulfide-loaded microspheres in treating breast cancer. Acta Pharmaceutica Sinica B, 8 (3). pp. 371-380. ISSN 2211-3835

Yan, Hongqiang and Li, Nannan and Cheng, Jie and Song, Pingan and Fang, Zhengping and Wang, Hao (2018) Fabrication of flame retardant benzoxazine semi-biocomposites reinforced by ramie fabrics with bio-based flame retardant coating. Polymer Composites, 39 (Spec. Iss., Suppl. 1). E480-E488. ISSN 0272-8397

Zong, Enmin and Huang, Guobo and Liu, Xiaohuan and Lei, Weiwei and Jiang, Shengtao and Ma, Zhongqing and Wang, Jifu and Song, Pingan (2018) A lignin-based nano-adsorbent for superfast and highly selective removal of phosphate. Journal of Materials Chemistry A, 6 (21). pp. 9971-9983. ISSN 2050-7488

Dou, Fei and Shi, Liyi and Song, Pingan and Chen, Guorong and An, Juan and Liu, Hongjiang and Zhang, Dengsong (2018) Design of orderly carbon coatings for SiO anodes promoted by TiO2 toward high performance lithium-ion battery. Chemical Engineering Journal, 338. pp. 488-495. ISSN 1385-8947

Reddy, R. Muni Rami and Karunasena, W. and Lokuge, W. (2018) Free vibration of functionally graded-GPL reinforced composite plates with different boundary conditions. Aerospace Science and Technology, 78. pp. 147-156. ISSN 1270-9638

Abousnina, Rajab and Manalo, Allan and Lokuge, Weena and Zhang, Zuhua (2018) Effects of light crude oil contamination on the physical and mechanical properties of geopolymer cement mortar. Cement and Concrete Composites, 90. pp. 136-149. ISSN 0958-9465

Zhu, Qianqian and Zhuang, Wei and Niu, Huanqing and Ge, Lei and Villacorta Hernandez, Byron and Wu, Jinglan and Wang, Kai and Liu, Dong and Chen, Yong and Zhu, Chenjie and Ying, Hanjie (2018) Affinity induced immobilization of adenylate cyclase from the crude cell lysate for ATP conversion. Colloids and Surfaces B: Biointerfaces, 164. pp. 155-164. ISSN 0927-7765

Ferdous, Wahid and Manalo, Allan and Van Erp, Gerard and Aravinthan, Thiru and Ghabraie, Kazem (2018) Evaluation of an innovative composite railway sleeper for a narrow-gauge track under static load. Journal of Composites for Construction, 22 (2). pp. 1-13. ISSN 1090-0268

Tu, Jian and Zhou, Kun-Feng and Zhou, Zhi-Ming and Huang, Can and Chen, Zhi-Gang (2018) Effects of ausforming procedure and following annealing treatment on microstructural characteristics in cobalt. Acta Metallurgica Sinica (English Letters), 31 (4). pp. 415-422. ISSN 1006-7191

Hong, Min and Chen, Zhigang and Zou, Jin (2018) Fundamental and progress of Bi2Te3-based thermoelectric materials. Chinese Physics B, 27 (4). pp. 1-25. ISSN 1674-1056

Lokuge, Weena and Wilson, Aaron and Gunasekara, Chamila and Law, David W. and Setunge, Sujeeva (2018) Design of fly ash geopolymer concrete mix proportions using Multivariate Adaptive Regression Spline model. Construction and Building Materials, 166. pp. 472-481. ISSN 0950-0618

Ge, Lei and Hamilton, Christopher and Febrina, Rahman Tasha and Rudolph, Victor and Rufford, Thomas E. (2018) A phase inversion polymer coating to prevent swelling and spalling of clay fines in coal seam gas wells. International Journal of Coal Science and Technology. ISSN 2095-8293

Zhang, Wei and Yao, Xiao and Yang, Tao and Zhang, Zuhua (2018) Effect of calcined dolomite addition on sodium carbonate-activated slag cements with different curing methods. Advances in Cement Research. pp. 1-12. ISSN 0951-7197

Hong, Min and Chen, Zhi-Gang and Yang, Lei and Liao, Zhi-Ming and Zou, Yi-Chao and Chen, Yan-Hui and Matsumura, Syo and Zou, Jin (2018) Achieving zT > 2 in p-Type AgSbTe2−xSex alloys via exploring the extra light valence band and introducing dense stacking faults. Advanced Energy Materials, 8 (9 - Article 1702333). ISSN 1614-6832

Mohammadi, S. and Ataei, M. and Khaloo Kakaie, R. and Mirzaghorbanali, A. (2018) Prediction of the main caving span in longwall mining using fuzzy MCDM technique and statistical method. Journal of Mining and Environment, 9 (3). pp. 717-726. ISSN 2251-8592

Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2018) An investigation on the student performance in first year fundamental engineering course, Engineering Statics. Educational Research Applications, 2018 (01). pp. 1-5. ISSN 2575-7032

Hong, Min and Chen, Zhi-Gang and Yang, Lei and Zou, Yi-Chao and Dargusch, Matthew and Wang, Hao and Zou, Jin (2018) Realizing zT of 2.3 in Ge1−x−ySbxInyTe via reducing the phase-transition temperature and introducing resonant energy doping. Advanced Materials, 30 (11 - Article 1705942). ISSN 0935-9648

Aziz, Naj and Rasekh, Haleh and Mirzaghorbanali, Ali and Yang, Guanyu and Khaleghparast, Saman and Nemcik, Jan (2018) An experimental study on the shear performance of fully encapsulated cable bolts in single shear test. Rock Mechanics and Rock Engineering. ISSN 0723-2632

Chen, Zhen and Chan, Tommy H. T. and Nguyen, Andy (2018) Moving force identification based on modified preconditioned conjugate gradient method. Journal of Sound and Vibration, 423 (2018). pp. 100-117. ISSN 0022-460X

Liu, Shan and Chevali, Venkata S. and Xu, Zhiguang and Hui, David and Wang, Hao (2018) A review of extending performance of epoxy resins using carbon nanomaterials. Composites Part B: Engineering, 136 (1). pp. 197-214. ISSN 1359-8368

Maranan, G. B. and Manalo, A. C. and Benmokrane, B. and Karunasena, W. and Mendis, P. and Nguyen, T. Q. (2018) Shear behaviour of geopolymer-concrete beams transversely reinforced with continuous rectangular GFRP composite spirals. Composite Structures, 187. pp. 454-465. ISSN 0263-8223

Kakei, Ayad Arab and Islam, Mainul and Leng, Jingsong and Epaarachchi, Jayantha A. (2018) Use of an elasto-plastic model and strain measurements of embedded fibre Bragg grating sensors to detect Mode I delamination crack propagation in woven cloth (0/90) composite materials. Structural Health Monitoring, 17 (2). pp. 363-378. ISSN 1475-9217

Kakei, Ayad and Epaarachchi, Jayantha A. (2018) Use of fiber Bragg grating sensors for monitoring delamination damage propagation in glass-fiber reinforced composite structures. Frontiers of Optoelectronics, 11 (1). pp. 60-68. ISSN 2095-2759

Misnon, Mohd Iqbal and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Chen, Haizhen and Goda, Koichi and Khan, Md Tawhidul Islam (2018) Flammability characteristics of chemical treated woven hemp fabric. Advances in Materials Science and Engineering, 5 (1). pp. 1-20. ISSN 1687-8434

Mirzaghorbanali, Ali and Gregor, Peter and Alkandari, Hamed and Aziz, Naj and McDougall, Kevin (2018) Mechanical behaviours of grout for strata reinforcement. In: 2018 Coal Operators' Conference, 7-9 Feb 2018, Wollongong, NSW, Australia.

Jamali, Shojaeddin and Chan, Tommy H. T. and Nguyen, Andy and Thambiratnam, David P. (2018) Modelling techniques for structural evaluation for bridge assessment. Journal of Civil Structural Health Monitoring, 8 (2). pp. 271-283. ISSN 2190-5452

Herath, Madhubhashitha and Al-Azzawi, Wessam and Epaarachchi, Jayantha and Islam, Mainul and Robertson, Scott and Leng, Jinsong and Zhang, F. (2018) Thermo-mechanical behaviour and shape memory characteristics of carbon fibre reinforced epoxy. In: 2018 International Conference on Nanoscience and Nanotechnology (ICONN 2018) , 29 Jan - 2 Feb 2018, Wollongong, NSW, Australia.

Zhang, Yu and Zhang, Zuhua and Li, Xuerun and Li, Weifeng and Shen, Xiaodong and Wang, Hao (2018) Effect of welan gum on the hydration and hardening of Portland cement. Journal of Thermal Analysis and Calorimetry, 131 (2). pp. 1277-1286. ISSN 1388-6150

Turner, Paul and Liu, Tao and Zeng, Xuesen and Brown, Kevin (2018) Three-dimensional woven carbon fibre polymer composite beams and plates under ballistic impact. Composite Structures, 185. pp. 483-495. ISSN 0263-8223

Zou, Yi-Chao and Chen, Zhi-Gang and Zhang, Enze and Kong, Fantai and Lu, Yan and Wang, Lihua and Drennan, John and Wang, Zhongchang and Xiu, Faxian and Cho, Kyeongjae and Zou, Jin (2018) Atomic disorders in layer structured topological insulator SnBi2Te4 nanoplates. Nano Research, 11 (2). pp. 696-706. ISSN 1998-0124

Khan, Belas Ahmed and Na, Haining and Chevali, Venkata and Warner, Philip and Zhu, Jin and Wang, Hao (2018) Glycidyl methacrylate-compatibilized poly(lactic acid)/hemp hurd biocomposites: processing, crystallization, and thermo-mechanical response. Journal of Materials Science and Technology, 34 (2). pp. 387-397. ISSN 1005-0302

Mehrinejad Khotbehsara, Mojdeh and Mehdizadeh Miyandehi, Bahareh and Naseri, Farzad and Ozbakkaloglu, Togay and Jafari, Faezeh and Mohseni, Ehsan (2018) Effect of SnO2, ZrO2, and CaCO3 nanoparticles on water transport and durability properties of self-compacting mortar containing fly ash: experimental observations and ANFIS predictions. Construction and Building Materials (158). pp. 823-834. ISSN 0950-0618

Wang, Yi and Thambiratnam, David P. and Chan, Tommy H.T. and Nguyen, Andy (2018) Method development of damage detection in asymmetric buildings. Journal of Sound and Vibration, 423. pp. 41-56. ISSN 0022-460X

Wang, Shengnan and Deng, Yi and Yang, Lei and Shi, Xiuyuan and Yang, Weizhong and Chen, Zhi-Gang (2018) Enhanced antibacterial property and osteo-differentiation activity on plasma treated porous polyetheretherketone with hierarchical micro/nano-topography. Journal of Biomaterials Science, Polymer Edition, 29 (5). pp. 520-542. ISSN 0920-5063

Lin, Rijia and Villacorta Hernandez, Byron and Ge, Lei and Zhu, Zhonghua (2018) Metal organic frameworks based mixed matrix membrane: An overview on filler/polymer interface. Journal of Materials Chemistry A, 6 (2). pp. 293-312. ISSN 2050-7488

Viet, N. V. and Zaki, W. and Umer, R. (2018) Interlaminar shear stress function for adhesively bonded multi-layer metal laminates. International Journal of Adhesion and Adhesives, 82. pp. 14-20. ISSN 0143-7496

Alantali, A. and Alia, R. A. and Umer, R. and Cantwell, W. J. (2018) Scaling effects in the manufacture and testing of grid-stiffened composite structures. Journal of Composite Materials. pp. 1-13. ISSN 0021-9983

Shi, Xiaolei and Chen, Zhi-Gang and Liu, Weidi and Yang, Lei and Hong, Min and Moshwan, Raza and Huang, Liqing and Zou, Jin (2018) Achieving high Figure of Merit in p-type polycrystalline Sn0.98Se via self-doping and anisotropy-strengthening. Energy Storage Materials, 10. pp. 130-138. ISSN 2405-8297

Endruweit, A. and Zeng, X. and Matveev, M. and Long, A. C. (2018) Effect of yarn cross-sectional shape on resin flow through inter-yarn gaps in textile reinforcements. Composites Part A: Applied Science and Manufacturing, 104. pp. 139-150. ISSN 1359-835X

Zong, Enmin and Liu, Xiaohuan and Liu, Lina and Wang, Jifu and Song, Pingan and Ma, Zhongqing and Ding, Jie and Fu, Shenyuan (2018) Graft polymerization of acrylic monomers onto lignin with CaCl2-H2O2 as initiator: preparation, mechanism, characterization, and application in poly(lactic acid). ACS Sustainable Chemistry and Engineering, 6 (1). pp. 337-348.

Nguyen, A. and Kodikara, K. A. T. L. and Chan, T. H. T. and Thambiratnam, D. P. (2018) Toward effective structural identification of medium-rise building structures. Journal of Civil Structural Health Monitoring, 8 (1). pp. 63-75. ISSN 2190-5452

Vasileff, Anthony and Xu, Chaochen and Ge, Lei and Zheng, Yao and Qiao, Shi-Zhang (2018) Bronze alloys with tin surface sites for selective electrochemical reduction of CO2. Chemical Communications, 54 (99). pp. 13965-13968. ISSN 1359-7345

Abdollahnejad, Zahra and Zhang, Zuhua and Wang, Hao and Mastali, Mohammad (2018) Comparative Study on the drying shrinkage and mechanical properties of geopolymer foam concrete incorporating different dosages of fiber, sand and foam agents. In: 2017 fib Symposium: High Tech Concrete: Where Technology and Engineering Meet, 12-14 June 2017, Maastricht, The Netherlands.

Wu, Linmei and Liu, Peng and Zhang, Zuhua and Zhu, DeJu and Wang, Hao (2018) Multiscale modeling for high-performance concrete: a review. International Journal for Multiscale Computational Engineering, 16 (1). pp. 1-17. ISSN 1543-1649

Pathirage, Thisara S. and Chan, Tommy H. T. and Thambiratnam, David P. and Nguyen, Andy and Moragaspitiya, H. N. P. (2018) Prestress evaluation in prestressed concrete plate-like structures. International Journal of Lifecycle Performance Engineering, 2 (3/4). pp. 127-143. ISSN 2043-8648

Alshammari, F. Z. and Saleh, K. H. and Yousif, B. F. and Alajmi, A. and Shalwan, A. and Alotaibi, J. G. (2018) The influence of fibre orientation on tribological performance of jute fibre reinforced epoxy composites considering different mat orientations. Tribology in Industry, 40 (3). pp. 335-348. ISSN 0354-8996

2017

Huang, Liqing and Qian, Ma and Wang, Lihua and Chen, Zhi-Gang and Shi, Zhiming and Nguyen, Van and Zou, Jin (2017) High-tensile-strength and ductile novel Ti-Fe-N-B alloys reinforced with TiS nanowires. Materials Science and Engineering A, 708 . pp. 285-290. ISSN 0921-5093

Freudenberg, Brett and Chardon, Toni and Brimble, Mark and Belle Isle, Melissa (2017) Tax literacy of Australian small businesses. Journal of Australian Taxation, 18 (2). pp. 21-61. ISSN 1440-0405

Sandanayake, Malindu and Lokuge, Weena and Zhang, Guomin and Setunge, Sujeeva and Thushar, Quddus (2017) Greenhouse gas emissions during timber and concrete building construction - a scenario based comparative case study. Sustainable Cities and Society , 38. pp. 91-97. ISSN 2210-6707

Taheri, Adel and Sereshki, Farhang and Ardejani, Faramarz Doulati and Mirzaghorbanali, Ali (2017) Simulation of macerals effects on methane emission during gas drainage in coal mines. Fuel, 210. pp. 659-665. ISSN 0016-2361

Song, Pingan and Xu, Zhiguang and Dargusch, Matthew and Chen, Zhi-Gang and Wang, Hao and Guo, Qipeng (2017) Granular nanostructure: a facile biomimetic strategy for the design of supertough polymeric materials with high ductility and strength. Advanced Materials, 29 (46). pp. 1-7. ISSN 0935-9648

Al Azzawi, Wessam and Epaarachchi, J. A. and Islam, Mainul and Leng, Jinsong (2017) Implementation of a finite element analysis procedure for structural analysis of shape memory behaviour of fibre reinforced shape memory polymer composites. Smart Materials and Structures, 26 (12). ISSN 0964-1726

Xia, Wen and He, Dongning and Fu, Yun-fei and Wei, Xiao-yi and Liu, Hong-chao and Ye, Jiang-ping and Liu, Yun-fei and Li, Ji-hua (2017) Advanced technology for nanostarches preparation by high speed jet and its mechanism analysis. Carbohydrate Polymers, 176. pp. 127-134. ISSN 0144-8617

Aziz, A. R. and Ali, M. A. and Zeng, X. and Umer, R. and Schubel, P. and Cantwell, W. J. (2017) Transverse permeability of dry fiber preforms manufactured by automated fiber placement. Composites Science and Technology, 152. pp. 57-67. ISSN 0266-3538

Gao, Shuai and Villacorta, Byron S. and Ge, Lei and Rufford, Thomas E. and Zhu, Zhonghua (2017) Effect of sonication and hydrogen peroxide oxidation of carbon nanotube modifiers on the microstructure of pitch-derived activated carbon foam discs. Carbon, 124. pp. 142-151. ISSN 0008-6223

Konarova, Muxina and Aslam, Waqas and Ge, Lei and Ma, Qing and Tang, Fengqiu and Rudolph, Victor and Beltramini, Jorge Norberto (2017) Enabling process intensification by 3D printing of catalytic structures. ChemCatChem, 9 (21). pp. 4132-4138. ISSN 1867-3880

Xiang, Ziru and Chan, Tommy H. T. and Thambiratnam, David P. and Nguyen, Andy (2017) Prestress and excitation force identification in a prestressed concrete box–girder bridge. Computers and Concrete, 20 (5). pp. 617-625. ISSN 1598-8198

Song, Yufei and Wang, Wei and Ge, Lei and Xu, Xiaomin and Zhang, Zhenbao and Juliao, Paulo Sergio Barros and Zhou, Wei and Shao, Zongping (2017) Rational design of a water-storable hierarchical architecture decorated with amorphous barium oxide and nickel nanoparticles as a solid oxide fuel cell anode with excellent sulfur tolerance. Advanced Science, 4 (11).

Mirzaghorbanali, Ali and Rasekh, Haleh and Aziz, Naj and Yang, Guanyu and Khaleghparast, Saman and Nemcik, Jan (2017) Shear strength properties of cable bolts using a new double shear instrument, experimental study, and numerical simulation. Tunnelling and Underground Space Technology, 70 (70). pp. 240-253. ISSN 0886-7798

Ghanei, Amir and Jafari, Faezeh and Mehrinejad Khotbehsara, Mojdeh and Mohseni, Ehsan and Tang, Waiching and Cui, Hongzhi (2017) Effect of nano-CuO on engineering and microstructure properties of fibre-reinforced mortars incorporating metakaolin: experimental and numerical studies. Materials, 10 (10). ISSN 1996-1944

Cao, Shen and Huang, Zhong-Yue and Zu, Fang-Qiu and Xu, Ju and Yang, Lei and Chen, Zhi-Gang (2017) Enhanced thermoelectric properties of Ag-Modified Bi0.5Sb1.5Te3 composites by a facile electroless plating method. ACS Applied Materials & Interfaces, 9 (42). pp. 36478-36482. ISSN 1944-8244

Benmokrane, Brahim and Nazair, Claude and Seynave, Xavier and Manalo, Allan (2017) Comparison between ASTM D7205 and CSA S806 tensile-testing methods for glass-fiber-reinforced-polymer bars. Journal of Composites for Construction, 21 (5). pp. 1-13. ISSN 1090-0268

Benmokrane, Brahim and Manalo, Allan and Bouhet, Jean-Charles and Mohamed, Khaled and Robert, Mathieu (2017) Effects of diameter on the durability of glass-fiber-reinforced-polymer (GFRP) bars conditioned in alkaline solution. Journal of Composites for Construction, 21 (5). pp. 1-12. ISSN 1090-0268

Lokuge, Weena and Wilson, Matthew and Tran, Huu and Setunge, Sujeeva (2017) Predicting the failure of timber bridges by using current inspection reports. Engineering for Public Works (7). pp. 85-89.

Liu, Shan and Ge, Lei and Gao, Shuai and Zhuang, Linzhou and Zhu, Zhonghua and Wang, Hao (2017) Activated carbon derived from bio-waste hemp hurd and retted hemp hurd for CO2 adsorption. Composites Communications, 5. pp. 27-30. ISSN 2452-2139

Ma, Shuji and Aziz, Naj and Nemcik, Jan and Mirzaghorbanali, Ali (2017) The effects of installation procedure on bond characteristics of fully grouted rock bolts. Geotechnical Testing Journal, 40 (5). ISSN 1945-7545

Al Antali, A. and Umer, R. and Zhou, J. and Cantwell, W. J. (2017) The energy-absorbing properties of composite tube-reinforced aluminum honeycomb. Composite Structures, 176. pp. 630-639. ISSN 0263-8223

Feng, Jiabin and Sun, Yiqi and Song, Pingan and Lei, Weiwei and Wu, Qiang and Liu, Lina and Yu, Youming and Wang, Hao (2017) Fire-resistant, strong and green polymer nanocomposites based on poly(lactic acid) and core-shell nanofibrous flame retardants. ACS Sustainable Chemistry and Engineering, 5 (9). pp. 7894-7904.

Zhuang, Xianhuan and Song, Pingan and Chen, Guorong and Shi, Liyi and Wu, Yuan and Tao, Xinyong and Liu, Hongjiang and Zhang, Dengsong (2017) Coralloid-like nanostructured c-nSi/SiOx@Cy anodes for high performance lithium ion battery. ACS Applied Materials and Interfaces, 9 (34). pp. 28464-28472. ISSN 1944-8244

Mehrinejad Khotbehsara, Mojdeh and Mohseni, Ehsan and Ozbakkaloglu, Togay and Ranjbar, Malek Mohammad (2017) Durability characteristics of self-compacting concrete incorporating pumice and metakaolin. Journal of Materials in Civil Engineering, 29 (11). ISSN 0899-1561

Alantali, A. and Alia, R. A. and Umer, R. and Cantwell, W. J. (2017) Energy absorption in aluminium honeycomb cores reinforced with carbon fibre reinforced plastic tubes. Journal of Sandwich Structures and Materials. ISSN 1099-6362

Abbott, T. and Gamage, N. and Setunge, S. and Lokuge, W. (2017) Predicting the remaining life of timber bridges. In: 12th World Congress on Engineering Asset Management & 13th International Conference on Vibration Engineering and Technology of Machinery , 2-4 August 2017, Brisbane, Australia.

Manalo, Allan and Maranan, Ginghis and Sharma, Sukrant and Karunasena, Warna and Bai, Yu (2017) Temperature-sensitive mechanical properties of GFRP composites in longitudinal and transverse directions: a comparative study. Composite Structures, 173. pp. 255-267. ISSN 0263-8223

Muttashar, Majid and Manalo, Allan and Karunasena, Warna and Lokuge, Weena (2017) Flexural behavior of glued GFRP tubes filled with concrete. In: 6th Asia-Pacific Conference on FRP in Structures (APFIS2017), 19-21 July 2017, Singapore.

Lu, Xuemei and Peng, Yuelian and Qiu, Haoran and Liu, Xinrui and Ge, Lei (2017) Anti-fouling membranes by manipulating surface wettability and their anti-fouling mechanism. Desalination, 413. pp. 127-135. ISSN 0011-9164

Rasekh, Haleh and Aziz, Naj and Mirzaghorbanali, Ali and Nemcik, Jan and Li, Xuwei and Yang, Guanyu and Khaleghparast, Saman (2017) Double shear testing of cable bolts with no concrete face contacts. Procedia Engineering, 191. pp. 1169-1177.

Aziz, Naj and Majoor, Dean and Mirzaghorbanali, Ali (2017) Strength properties of grout for strata reinforcement. Procedia Engineering, 191. pp. 1178-1184.

Vali, Ramin and Mehrinejad Khotbehsara, Elham and Saberian, Mohammad and Li, Jie and Mehrinejad, Mojdeh and Jahandari, Soheil (2017) A three-dimensional numerical comparison of bearing capacity and settlement of tapered and under-reamed piles. International Journal of Geotechnical Engineering. ISSN 1938-6362

Deng, Layun and He, Hongchen and Chen, Zejun and Liu, Shan and Chevali, Venkata S. (2017) Effects of wood fiber size on the performance of biodegradable foam. Journal of Biobased Materials and Bioenergy, 11 (3). pp. 206-209. ISSN 1556-6560

Song, Pingan and Wang, Cong and Chen, Lei and Zheng, Yiqi and Liu, Lina and Wu, Qiang and Huang, Guobo and Yu, Youming and Wang, Hao (2017) Thermally stable, conductive and flame-retardant nylon 612 composites created by adding two-dimensional alumina platelets. Composites Part A: Applied Science and Manufacturing, 97. ISSN 1359-835X

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru (2017) Effect of beam orientation on the static behaviour of phenolic core sandwich composites with different shear span-to-depth ratios. Composite Structures, 168. pp. 292-304. ISSN 0263-8223

Javazmi, Leila and Khoddami, Akbar and Mazrouei-Sebdani, Zahra and Shams-Ghahfarokhi, Farzaneh and Low, Tobias (2017) Fabrication of a silica aerogel and examination of its hydrophobic properties via contact angle and 3M water repellency tests. In: 2017 5th International Conference on Nano and Materials Engineering (ICNME 2017), 1-3 April 2017, Bali, Indonesia.

Al Azzawi, Wessam and Islam, Mainul M. and Leng, Jinsong and Li, Fengfeng and Epaarachchi, Jayantha A. (2017) Quantitative and qualitative analysis of mechanical behavior and dimensional stability of styrene-based shape memory composites. Journal of Intelligent Material Systems and Structures. ISSN 1045-389X

Zhuang, Linzhou and Ge, Lei and Yang, Yisu and Li, Mengran and Jia, Yi and Yao, Xiangdong and Zhu, Zhonghua (2017) Ultrathin iron-cobalt oxides nanosheets with abundant oxygen vacancies for oxygen evolution reaction. Advanced Materials, 29 (17). p. 1606793. ISSN 0935-9648

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2017) Durability characteristics and property prediction of glass fibre reinforced mixed plastics composites. Composites Part B: Engineering, 116. pp. 16-29. ISSN 1359-8368

Khan, Ziaullah and Yousif, B. F. and Islam, Mainul (2017) Fracture behaviour of bamboo fiber reinforced epoxy composites. Composites Part B: Engineering, 116. pp. 186-199. ISSN 1359-8368

Shamsuddoha, Md and Djukic, Luke P. and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan (2017) Mechanical and thermal properties of glass fibre-vinyl ester resin composite for pipeline repair exposed to hot-wet conditioning. Journal of Composite Materials, 51 (11). ISSN 0021-9983

Ardalan, R. Bani and Jamshidi, N. and Arabameri, H. and Joshaghani, A. and Mehrinejad, M. and Sharafi, P. (2017) Enhancing the permeability and abrasion resistance of concrete using colloidal nano-Si02 oxide and spraying nanosilicon practices. Construction and Building Materials, 146. pp. 128-135. ISSN 0950-0618

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2017) Analysis of stress concentration factor for tensile characteristics of syntactic foam using finite element method. Journal of Research Updates in Polymer Science, 6 (1). pp. 21-32.

Benmokrane, Brahim and Mohamed, Hamdy M. and Manalo, Allan and Cousin, Patrice (2017) Evaluation of physical and durability characteristics of new headed glass fiber–reinforced polymer bars for concrete structures. Journal of Composites for Construction, 21 (2). pp. 1-12. ISSN 1090-0268

Benmokrane, Brahim and Ali, Ahmed H. and Mohamed, Hamdy M. and El-Safty, Adel and Manalo, Allan (2017) Laboratory assessment and durability performance of vinyl-ester, polyester, and epoxy glass-FRP bars for concrete structures. Composites Part B: Engineering, 114. pp. 163-174. ISSN 1359-8368

Khan, Kamran A. and Umer, Rehan (2017) Modeling the viscoelastic compaction response of 3D woven fabrics for liquid composite molding processes. Journal of Reinforced Plastics and Composites, 36 (18). pp. 1299-1315. ISSN 0731-6844

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru (2017) Performance of an innovative composite railway sleeper. In: 2017 Advanced Composites Innovation Conference, 28 - 30 Mar 2017, Gold Coast, Australia.

Ren, Daming and Yan, Chunjie and Duan, Ping and Zhang, Zuhua and Li, Lingyao and Yan, Zhongyun (2017) Durability performances of wollastonite, tremolite and basalt fiber-reinforced metakaolin geopolymer composites under sulfate and chloride attack. Construction and Building Materials, 134. pp. 56-66. ISSN 0950-0618

Maranan, G. B. and Manalo, A. C. and Benmokrane, B. and Karunasena, W. and Mendis, P. (2017) Shear behavior of geopolymer concrete beams reinforced with glass fiber-reinforced polymer bars. ACI Structural Journal, 114 (2). pp. 337-348. ISSN 0889-3241

Rasekh, Haleh and Mirzaghorbanali, Ali and Nemcik, Jan and Aziz, Naj and Li, Xuwei (2017) A new equation for the shear strength of cable bolts incorporating the energy balance theory. Geotechnical and Geological Engineering, 35 (4). pp. 1529-1548. ISSN 0960-3182

Manalo, Allan and Aravinthan, Thiru and Fam, Amir and Benmokrane, Brahim (2017) State-of-the-art review on FRP sandwich systems for lightweight civil infrastructure. Journal of Composites for Construction, 21 (1). pp. 1-16. ISSN 1090-0268

Zhang, Zuhua and Zhu, Yingcan and Yang, Tao and Li, Liangfeng and Zhu, Huajun and Wang, Hao (2017) Conversion of local industrial wastes into greener cement through geopolymer technology: a case study of high-magnesium nickel slag. Journal of Cleaner Production, 141. pp. 463-471. ISSN 0959-6526

Li, Lefan and Zhao, Pengfei and Luo, Yongyue and Yu, Heping and Tao, Jinlong and He, Dongning and Gong, Wei and Li, Dejun and Peng, Zheng and Wang, Zhifen (2017) Compatibility-tuned distribution of nanoparticles in co-continuous rubber structures toward microwave absorption enhancement. RSC Advances, 7 (2). pp. 1093-1100.

Li, Xuwei and Aziz, Naj and Mirzaghorbanali, Ali and Nemcik, Jan (2017) Comparison of the shear test results of a cable bolt on three laboratory test apparatuses. Tunnelling and Underground Space Technology, 61. pp. 82-89. ISSN 0886-7798

Yang, Lei and Chen, Zhi-Gang and Hong, Min and Wang, Lihua and Kong, Deli and Huang, Liqing and Han, Guang and Zou, Yichao and Dargusch, Matthew and Zou, Jin (2017) n-type Bi-doped PbTe nanocubes with enhanced thermoelectric performance. Nano Energy, 31. pp. 105-112. ISSN 2211-2855

Gao, Shuai and Ge, Lei and Rufford, Thomas E. and Zhu, Zhonghua (2017) The preparation of activated carbon discs from tar pitch and coal powder for adsorption of CO 2, CH 4 and N 2. Microporous and Mesoporous Materials, 238. pp. 19-26. ISSN 1387-1811

Qian, Mengbo and Sun, Yiqi and Xu, Xiaodong and Liu, Lina and Song, Pingan and Yu, Youming and Wang, Hao and Qian, Jun (2017) 2D-alumina platelets enhance mechanical and abrasion properties of PA-612 via interfacial hydrogen-bond interactions. Chemical Engineering Journal, 308. pp. 760-771.

Liu, Shan and Ge, Lei and Gao, Shuai and Zhuang, Linzhou and Zhu, Zhonghua and Wang, Hao (2017) Activated carbon derived from bio-waste hemp hurd and retted hemp hurd for CO2 adsorption. Composites Communications, 5. pp. 27-30. ISSN 2452-2139

Wu, Linmei and Farzadnia, Nima and Shi, Caijun and Zhang, Zuhua and Wang, Hao (2017) Autogenous shrinkage of high performance concrete: a review. Construction and Building Materials, 149. pp. 62-75. ISSN 0950-0618

Muttashar, M. and Karunasena, W. and Manalo, A. and Lokuge, W. (2017) Behavior of pultruded multi-celled GFRP hollow beams with low-strength concrete infill. In: 24th Australasian Conference on the Mechanics of Structures and Materials: Advancements and Challenges (ACMSM24), 6-9 Dec 2016, Perth, Australia.

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru (2017) Behaviour of composite sandwich beams with different shear span-to-depth ratios. In: 24th Australasian Conference on the Mechanics of Structures and Materials: Advancements and Challenges (ACMSM24), 6-9 Dec 2016, Perth, Australia.

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru (2017) Bond behaviour of composite sandwich panel and epoxy polymer matrix: Taguchi design of experiments and theoretical predictions. Construction and Building Materials, 145. pp. 76-87. ISSN 0950-0618

Khan, Belas Ahmed (2017) Development of antibacterial hemp hurd/poly(lactic acid) biocomposite for food packaging. [Thesis (PhD/Research)]

Jayatilake, Indunil Nayanakanthi (2017) Dynamic behaviour of composite sandwich beams and plates with debonds. [Thesis (PhD/Research)]

Hong, Min and Chen, Zhi-Gang and Yang, Lei and Chasapis, Thomas C. and Kang, Stephen Dongmin and Zou, Yichao and Auchterlonie, Graeme John and Kanatzidis, Mercouri G. and Snyder, G. Jeffrey and Zou, Jin (2017) Enhancing the thermoelectric performance of SnSe1-xTex nanoplates through band engineering. Journal of Materials Chemistry A, 5 (21). pp. 10713-10721. ISSN 2050-7488

Sun, Shuai and Wang, Lipeng and Song, Pingan and Ding, Liping and Bai, Yongping (2017) Facile fabrication of hydrolysis resistant phosphite antioxidants for high-performance optical PET films via in situ incorporation. Chemical Engineering Journal, 328. pp. 406-416. ISSN 1385-8947

Sun, Yiqi and Sun, Shuai and Chen, Lei and Liu, Lina and Song, Pingan and Li, Wei and Yu, Youming and Lu, Fengzhu and Qian, Jun and Wang, Hao (2017) Flame retardant and mechanically tough poly(lactic acid) biocomposites via combining ammonia polyphosphate and polyethylene glycol. Composites Communications, 6. ISSN 2452-2139

Muttashar, Majid and Manalo, Allan and Karunasena, Warna and Lokuge, Weena (2017) Flexural behaviour of multi-celled GFRP composite beams with concrete infill: experiment and theoretical analysis. Composite Structures, 159. pp. 21-33. ISSN 0263-8223

Liu, Shan (2017) Preparation of activated carbon from biomass and its application in gas adsorption. [Thesis (PhD/Research)]

Song, Pingan and Xu, Zhiguang and Wu, Yuanpeng and Cheng, Qunfeng and Guo, Qipeng and Wang, Hao (2017) Super-tough artificial nacre based on graphene oxide via synergistic interface interactions of Pi-Pi stacking and hydrogen bonding. Carbon, 111. pp. 807-812. ISSN 0008-6223

Ge, Lei and Lin, Rijia and Wang, Li and Rufford, Thomas E. and Villacorta, Byron and Liu, Shaomin and Liu, Lian X. and Zhu, Zhonghua (2017) Surface-etched halloysite nanotubes in mixed matrix membranes for efficient gas separation. Separation and Purification Technology, 173. pp. 63-71. ISSN 1383-5866

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Su, Haibin (2017) Vinyl ester/glass microballoon syntactic foams with low density. International Research Journal of Materials Sciences and Applications, 2017 (1). pp. 1-25. ISSN 2575-1034

This list was generated on Tue Oct 22 07:14:25 2019 AEST.