Browse by Faculty / Department / School

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors Name | Date | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items: 779.

A

Albdiry, M. T. and Yousif, B. F. (2019) Toughening of brittle polyester with functionalized halloysite nanocomposites. Composites Part B: Engineering, 160. pp. 94-109. ISSN 1359-8368

Algayyim, Sattar Jabbar Murad and Wandel, Andrew P. and Yusaf, Talal (2018) Mixtures of n-butanol and iso-butanol blended with diesel: experimental investigation of combustion characteristics, engine performance and emission levels in a compression ignition engine. Biofuels. pp. 1-10. ISSN 1759-7269

Adiletta, G. and Wijerathne, C. and Senadeera, W. and Russo, P. and Crescitelli, A. and Di Matteo, M. (2018) Dehydration and rehydration characteristics of pretreated pumpkin slices. Italian Journal of Food Science, 30 (4). pp. 684-706. ISSN 1120-1770

Algayyim, Sattar Jabbar Murad and Wandel, Andrew P. and Yusaf, Talal and Al-lwayzy, Saddam (2018) Butanol-acetone mixture blended with cottonseed biodiesel: spray characteristics evolution, combustion characteristics, engine performance and emission. Proceedings of the Combustion Institute, 37. ISSN 1540-7489

Algayyim, Sattar Jabbar Murad and Wandel, Andrew P. and Yusaf, Talal (2018) Experimental investigation of hydrated butanol-acetone (BA) and diesel blend as alternative fuel for CI engines. In: 37th International Symposium on Combustion, 29 July - 3 Aug 2018, Dublin, Ireland.

Algayyim, Sattar Jabbar Murad and Wandel, Andrew P. and Yusaf, Talal (2018) The impact of injector hole diameter on spray behaviour for butanol-diesel blends. Energies, 11 (5). pp. 1298-1310.

Algayyim, Sattar Jabbar Murad and Wandel, Andrew P. and Yusaf, Talal and Al-Lwayzy, Saddam and Hamawand, Ihsan (2018) Impact of butanol-acetone mixture as a fuel additive on diesel engine performance and emissions. Fuel, 227. pp. 118-126. ISSN 0016-2361

Algayyim, Sattar Jabbar Murad and Wandel, Andrew P. and Yusaf, Talal and Hamawand, Ihsan (2018) Production and application of ABE as a biofuel. Renewable and Sustainable Energy Reviews, 82. pp. 1195-1214. ISSN 1364-0321

Alshammari, F. Z. and Saleh, K. H. and Yousif, B. F. and Alajmi, A. and Shalwan, A. and Alotaibi, J. G. (2018) The influence of fibre orientation on tribological performance of jute fibre reinforced epoxy composites considering different mat orientations. Tribology in Industry, 40 (3). pp. 335-348. ISSN 0354-8996

Algayyim, Sattar Jabbar Murad and Wandel, Andrew P. and Yusaf, Talal (2017) Experimental and numerical investigation of spray characteristics of butanol-diesel blends. In: 11th Asia-Pacific Conference on Combustion, 10-14 Dec 2017, Sydney, Australia.

Algayyim, Sattar Jabbar Murad and Wandel, Andrew and Yusaf, Talal and Hamawand, Ihsan and Al-lwayzy, Saddam (2017) Experimental study of spray characteristics, engine performance and emission levels of acetone-butanol-ethanol mixture-diesel blends in a diesel engine. In: 11th Asia-Pacific Conference on Combustion, 10-14 Dec 2017, Sydney, Australia.

Algayyim, Sattar Jabbar Murad and Wandel, Andrew P. and Yusaf, Talal (2017) The effect of butanol-acetone mixture-cottonseed biodiesel blend on spray characteristics, engine performance and emissions in diesel engine. In: 11th Asia-Pacific Conference on Combustion, 10-14 Dec 2017, Sydney, Australia.

Algayyim, Sattar and Wandel, Andrew P. and Yusaf, Talal and Hamawand, Ihsan and Al-lwayzy, Saddam (2017) The experimental investigation of butanol-diesel blend on engine performance and emission levels in DI diesel engine. In: 1st MoHESR and HCED Iraq Scholars Conference in Australasia 2017 (ISCA 2017) , 5-6 Dec 2017, Melbourne, Australia.

Al Azzawi, Wessam and Epaarachchi, J. A. and Islam, Mainul and Leng, Jinsong (2017) Implementation of a finite element analysis procedure for structural analysis of shape memory behaviour of fibre reinforced shape memory polymer composites. Smart Materials and Structures, 26 (12). ISSN 0964-1726

Algayyim, Sattar Jabbar Murad and Wandel, Andrew P. and Yusaf, Talal and Hamawand, Ihsan (2017) The impact of n-butanol and iso-butanol as components of butanol-acetone (BA) mixture-diesel blend on spray, combustion characteristics, engine performance and emission in direct injection diesel engine. Energy, 140. pp. 1074-1086. ISSN 0360-5442

Askari, M. and Moghavvemi, M. and Almurib, Haider A. F. and Haidar, Ahmed M. A. (2017) Stability of soft constrained finite horizon model predictive control. IEEE Transactions on Industry Applications, 53 (6). pp. 5883-5892. ISSN 0093-9994

Al Azzawi, Wessam and Islam, Mainul M. and Leng, Jinsong and Li, Fengfeng and Epaarachchi, Jayantha A. (2017) Quantitative and qualitative analysis of mechanical behavior and dimensional stability of styrene-based shape memory composites. Journal of Intelligent Material Systems and Structures. ISSN 1045-389X

Alkaisi, Ahmed and Mossad, Ruth and Sharifian-Barforoush, Ahmad (2017) A review of the water desalination systems integrated with renewable energy. Energy Procedia, 110. pp. 268-274.

Al-Faruk, Abdullah and Sharifian, Ahmad (2017) Flow field and performance study of vertical axis Savonius type SST wind turbine. Energy Procedia, 110. pp. 235-242.

Al-lwayzy, Saddam H. and Yusaf, Talal (2017) Diesel engine performance and exhaust gas emissions using microalgae Chlorella protothecoides biodiesel. Renewable Energy, 101. pp. 690-701. ISSN 0960-1481

Alsafi, Mohamed (2017) Constant Rate of Momentum Change Ejector: simulation, experiments and flow visualisation. [Thesis (PhD/Research)]

Adcock, Glen (2016) Electro-thermal modelling of large PV array degradation for thermography and peak power conditioning monitoring. [USQ Project]

Alajmi, Abdalrahman R. E. S. (2016) Theoretical study of the effect of fibre orientations and porosity on heat conductivity of reinforced polymer composites. [USQ Project]

Armstrong, Brent (2016) Towards 2020: an energy-neutral council works depot. [USQ Project]

Akbari, Seyedmojtaba (2016) Using Internet of Things for vehicle’s emission monitoring. [USQ Project]

Al-Faruk, Abdullah and Sharifian, Ahmad (2016) Geometrical optimization of a swirling Savonius wind turbine using an open jet wind tunnel. Alexandria Engineering Journal, 55 (3). pp. 2055-2064. ISSN 1110-0168

Algayyim, Sattar and Wandel, Andrew and Yusaf, Talal and Hamawand, Ihsan and Al-lwayzy, Saddam (2016) Impact of butanol-acetone mixture as an oxygenated fuel additive to diesel fuel on diesel engine performance and emissions. In: 36th International Symposium on Combustion, 31 July - 5 Aug 2016, Seoul, Korea.

Anjang, A. and Chevali, V. S. and Feih, S. and Mouritz, A. P. (2016) Deterioration of the fire structural resistance of sandwich composite under tension due to water absorption. Composites Part A: Applied Science and Manufacturing , 87. pp. 263-270. ISSN 1359-835X

Afaghi Khatibi, A. and Chevali, V. and Feih, S. and Mouritz, A. P. (2016) Probability analysis of the fire structural resistance of aluminium plate. Fire Safety Journal, 83. pp. 15-24. ISSN 0379-7112

Adiletta, G. and Russo, P. and Senadeera, W. and Di Matteo, M. (2016) Drying characteristics and quality of grape under physical pretreatment. Journal of Food Engineering, 172. pp. 9-18. ISSN 0260-8774

Al Azzawi, W. S. and Epaarachchi, Jayantha Ananda and Islam, M. Mainul and Leng, Jinsong (2016) Shape memory polymers and their applications. In: Structural health monitoring technologies and next-generation smart composite structures. Composite Materials: Analysis and Design. Taylor & Francis (CRC Press), Boca Raton, Florida, pp. 447-478. ISBN 978-1-4822-2691-1

Al-Juboori, Raed A. and Yusaf, Talal and Aravinthan, Vasantha and Bowtell, Leslie (2016) Tracking ultrasonically structural changes of natural aquatic organic carbon: chemical fractionation and spectroscopic approaches. Chemosphere, 145. pp. 231-248. ISSN 0045-6535

Al-Juboori, Raed A. and Yusaf, Talal and Aravinthan, Vasantha and Bowtell, Leslie (2016) Investigating natural organic carbon removal and structural alteration induced by pulsed ultrasound. Science of the Total Environment, 541. pp. 1019-1030. ISSN 0048-9697

Ariafar, Kavous and Buttsworth, David and Al-Doori, Ghassan and Sharifi, Navid (2016) Mixing layer effects on the entrainment ratio in steam ejectors through ideal gas computational simulations. Energy, 95. pp. 380-392. ISSN 0360-5442

Al-Juboori, Raed A. and Aravinthan, Vasantha and Yusaf, Talal and Bowtell, Leslie (2016) Assessing the application and downstream effects of pulsed mode ultrasound as a pre-treatment for alum coagulation. Ultrasonics Sonochemistry, 31. pp. 7-19. ISSN 1350-4177

Alotaibi, J. G. and Yousif, B. F. (2016) Biolubricants and the potential of waste cooking oil. In: Ecotribology, research developments. Materials Forming, Machining and Tribology. Springer, Switzerland, pp. 125-143. ISBN 978-3-319-24005-3

Azwa, Z. N. and Yousif, B. F. and Manalo, A. C. and Karunasena, W. (2016) Natural fibers and their characterization. In: Natural fiber composites. Taylor & Francis (CRC Press), Boca Raton, FL, United States, pp. 35-64. ISBN 978-1-4822-3900-3

Ariafar, Kavous (2016) Simulation and measurement of condensation and mixing effects in steam ejectors. [Thesis (PhD/Research)]

Al-Sandooq, Jaafar Mahdi Jaafar (2016) Studies on the quality of feed stock and performance of agriculture roller mill using roller coated with nano-clay epoxy composite. [Thesis (PhD/Research)]

Ali, Obed M. and Mamat, Rizalman and Najafi, Gholamhassan and Yusaf, Talal and Ardebili, Seyed Mohammad Safieddin (2015) Optimization of biodiesel-diesel blended fuel properties and engine performance with ether additive using statistical analysis and response surface methods. Energies, 8 (12). pp. 14136-14150. ISSN 1996-1073

Ariafar, Kavous and Buttsworth, David and Al-Doori, Ghassan and Malpress, Ray (2015) Effect of mixing on the performance of wet steam ejectors. Energy, 93 (2). pp. 2030-2041. ISSN 0360-5442

Al-lwayzy, Saddam H. and Yusaf, Talal (2015) Combustion of microalgae oil and ethanol blended with diesel fuel. Energies, 8 (12). pp. 13985-13995. ISSN 1996-1073

Accendere, Robert Peter (2015) An Investigation into the testing and commissioning requirements of IEC 61850 Station Bus Substations. [USQ Project]

Anderson, Oliver Josh (2015) Feasibility assessment of low cost stereo computer vision in clay target shooting coaching. [USQ Project]

Al Kassir, Awf and Yusaf, Talal and Al Karany, Raul Kassir and Hamawand, Ihsan (2015) Determination of drying characteristics of biomass residues to be used as a renewable fuel. Journal of Biotechnology , 208 (Supplement). S15-S15. ISSN 0168-1656

Arashnia, Ilva and Najafi, Gholamhassan and Ghobadian, Barat and Yusaf, Talal and Mamat, Rizalman and Kettner, Maurice (2015) Development of micro-scale biomass-fuelled CHP system using stirling engine. Energy Procedia , 75. pp. 1108-1113.

Adiletta, Giuseppina and Senadeera, Wijitha and Liguori, Loredana and Crescitelli, Alessio and Albanese, Donatella and Russo, Paula (2015) The influence of abrasive pretreatment on hot air drying of grape. Food and Nutrition Sciences, 6. pp. 355-364. ISSN 2157-944X

Alotaibi, J. G. and Yousif, B. F. and Yusaf, T. F. (2015) Brass, aluminium, and mild steel sliding against stainless steel under dry conditions. International Journal of Precision Technology, 5 (2). pp. 85-96. ISSN 1755-2060

Al-Faruk, A. and Sharifian, A. S. (2015) Effects of flow parameters on the performance of vertical axis swirling type Savonius wind turbine. International Journal of Automotive and Mechanical Engineering, 12 (July-December). pp. 2929-2943. ISSN 2229-8649

Al-Sandooq, Jaafar Mahdi and Yousif, Belal and Jensen, T. A. (2015) Influence of metal coating on sorghum milling process subjected to three body abrasion. International Journal of Precision Technology, 5 (1). pp. 27-42. ISSN 1755-2060

Al-Faruk, A. and Sharifian, A. (2014) Influence of blade overlap and blade angle on the aerodynamic coefficients in vertical axis swirling type Savonius wind turbine. In: 19th Australasian Fluid Mechanics Conference (AFMC 2014), 8-11 Dec 2014, Melbourne, Australia.

Anumula, Sreekanth (2014) Communications for smart grid substation monitoring using WIMAX protocol. [USQ Project]

Altamar, Rashed (2014) Fracture behaviour of fibre/polymer composites based on synthetic and natural fibres. [USQ Project]

Al Atresh, Safia R. and Sharifian, Ahmad S. and Wandel, Andrew P. (2014) The effect of the width and number of gaps on the characteristics of swirl flow induced naturally inside split channel using hot air inlet. International Journal of Materials, Mechanics and Manufacturing, 2 (4). pp. 339-344. ISSN 1793-8198

Alqahtani, Rafi Ali (2014) Flexural properties of sisal fibre/epoxy Composites. [USQ Project]

Ariafar, Kavous and Buttsworth, David and Sharifi, Navid and Malpress, Ray (2014) Ejector primary nozzle steam condensation: area ratio effects and mixing layer development. Applied Thermal Engineering, 71 (1). pp. 519-527. ISSN 1359-4311

Atkinson, Andrew Peter (2014) Effect of variations in load profile on power transformer cyclic ratings. [USQ Project]

Al-Doori, Ghassan and Buttsworth, David R. (2014) Pitot pressure measurements in a supersonic steam jet. Experimental Thermal and Fluid Science, 58. pp. 56-61. ISSN 0894-1777

Alotaibi, J. G. and Yousif, B. F. and Yusaf, T. F. (2014) Wear behaviour and mechanism of different metals sliding against stainless steel counterface. Journal of Engineering Tribology, 228 (6). pp. 692-704. ISSN 1350-6501

Albdiry, M. T. and Yousif, B. F. (2014) Role of silanized halloysite nanotubes on structural, mechanical properties and fracture toughness of thermoset nanocomposites. Materials and Design, 57. pp. 279-288. ISSN 0264-1275

Albdiry, M. T. and Yousif, B. F. (2014) Effect of SiC addition on mechanical and wear characteristics of WC-32(W-Ti)C-6Co cemented carbides. International Journal of Precision Technology, 4 (1/2). pp. 110-121. ISSN 1755-2060

Agrira, Abdalla and Buttsworth, David R. and Said, Mior A. (2014) Instantaneous heat flux simulation of a motored reciprocating engine: unsteady thermal boundary layer with variable turbulent thermal conductivity. Journal of Heat Transfer: Transactions of the ASME, 136 (3). 031703 1-031703 9. ISSN 0022-1481

Alotaibi, J. G. and Yousif, B. F. and Yusaf, T. F. (2014) Wear and frictional behaviour of metals. In: 3rd International Conference on Advanced Materials and Engineering Materials (ICAMEM 2013), 14-15 Dec 2013, Singapore .

Abbaszadeh, A. and Ghobadian, B. and Najafi, G. and Yusaf, T. (2014) An experimental investigation of the effective parameters on wet washing of biodiesel purification. International Journal of Automotive and Mechanical Engineering, 9 (1). pp. 1525-1537. ISSN 2229-8649

Al-Saeed, Talal S. (2014) Machinability of natural fibre reinforced polymeric composites. [Thesis (PhD/Research)]

Albdiry, Mushtaq Taleb Ali (2014) Role of silanised halloysite nanotubes on the morphological and materials characteristics of thermoset composites. [Thesis (PhD/Research)]

Alotaibi, Jasem (2014) Wear and frictional performance of metals under dry/waste cooking oil lubricant conditions. [Thesis (PhD/Research)]

Albdiry, M. T. and Ku, H. and Yousif, B. F. (2013) Impact fracture behaviour of silane-treated halloysite nanotubes-reinforced unsaturated polyester. Engineering Failure Analysis, 35. pp. 718-725. ISSN 1350-6307

Azwa, Z. N. and Yousif, B. F. (2013) Characteristics of kenaf fibre/epoxy composites subjected to thermal degradation. Polymer Degradation and Stability, 98 (12). 2752-2759. ISSN 0141-3910

Ahmed, Diyar I. and Kasolang, S. and Khidhir, Basim A. and Yousif, B. F. (2013) Fuzzy logic based model to predict maximum oil-film pressure in journal bearing. Research Journal of Applied Sciences, Engineering and Technology , 6 (20). pp. 3871-3878. ISSN 2040-7459

Alawad, Aziz (2013) Response surface methodology. [USQ Project]

AL-Khaffajy, Marwaan and Mossad, Ruth (2013) Optimization of the heat exchanger in a flat plate indirect heating integrated collector storage solar water heating system. Renewable Energy, 57. pp. 413-421. ISSN 0960-1481

Azwa, Z. N. and Yousif, B. F. (2013) Thermal degredation study of kenaf fibre/epoxy composites using thermo gravimetric analysis. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Al-Ajmi, Abdullah (2013) Tribological behaviour of graphite/date palm fibres reinforced epoxy composites. [Thesis (PhD/Research)]

Aldraho, Abdelnour Mohamed Alnour (2013) Dynamic topologies for sustainable and energy efficient traffic engineering in communication networks. [Thesis (PhD/Research)]

B

Bui, Tung Thanh and Dinh, Thien Xuan and Tran, Canh-Dung and Duc, Trinh Chu and Dau, Van Thanh and UNSPECIFIED (2018) A study of ion wind generator using parallel arranged electrode configuration for centrifugal flow mixer. In: 22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences , 11-15 Nov 2018, Kaohsiung, Taiwan.

Brown, Jason and Parr, Alan (2018) ICT skill frameworks: do they achieve their goals and users’ expectations? Advanced Journal of Professional Practice, 1 (2). pp. 38-47.

Bui, Phong Nhu and Dinh, Thien Xuan and Phan, Hoa Thanh and Tran, Canh-Dung and Bui, Tung Thanh and Dau, Van Thanh (2018) A closed device to generate vortex flow using PZT. In: 13th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS 2018) , 22-26 April 2018 , Singapore.

Bui, Tung Thanh and Dinh, Thien Xuan and Tran, Canh-Dung and Duc, Trinh Chu and Dau, Van Thanh (2017) Computational and experimental study on ion wind scheme based aerosol sampling for biomedical applications. In: 19th International Conference on Solid-state Sensors, Actuators and Micro-Systems (TRANSDUCERS '17), 18-22 June 2017 , Kaohsiung, Taiwan .

Brink, Gavin N. and Wandel, Andrew P. and Hancock, Nigel H. and Pather, Selvan (2017) Spreading rate and dispersion behavior of evaporation-suppressant monolayer on open water surfaces: part 1 – at zero wind stress. Experimental Thermal and Fluid Science, 87. pp. 182-190. ISSN 0894-1777

Brown, Jason and Afrin, Nusrat and Khan, Jamil (2016) Blocking analysis of persistent resource allocations for M2M applications in wireless systems. Transactions on Emerging Telecommunications Technologies, 27 (11). pp. 1513-1529. ISSN 2161-3915

Beccarelli, Ryan (2016) Arduino modbus simulator. [USQ Project]

Byles, K. (2016) Automated shark detection using computer vision. [USQ Project]

Border, Fraser (2016) Design methodology evaluation: an investigation into the 'right' data for situational awareness of RTS-based tele-robotic systems in limited network environments. [USQ Project]

Bailey, Donald (2016) Mansell power lifter actuator failure analysis. [USQ Project]

Beutel, Kurt Gavin (2016) Power utility remote device communications using a Low Power Wide Area Network (LPWAN) based on the LoRa communications standard. [USQ Project]

Birkett, Russell Johnsen (2016) Video processing road safety system. [USQ Project]

Brown, Jason and Afrin, Nusrat and Khan, Jamil Y. (2016) Delay models for static and adaptive persistent resource allocations in wireless systems. IEEE Transactions on Mobile Computing, 15 (9). pp. 2193-2205. ISSN 1536-1233

Billingsley, John (2016) Ockham, Olbers and dark matter. ResearchGate, Berlin, Germany.

Barua, Suchi and Das, Narottam and Nordholm, Sven and Razaghi, Mohammad (2016) Comparison of pulse propagation and gain saturation characteristics among different input pulse shapes in semiconductor optical amplifiers. Optics Communications, 359. pp. 73-78. ISSN 0030-4018

Benachaiba, C. and Mazari, B. and Tandjaoui, M. N. and Haidar, Ahmed M. A. (2016) Power quality enhancement using DVR based on ant colony controller. In: 57th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON 2016), 13-14 Oct 2016 , Riga, Latvia.

Bergerman, Marcel and Billingsley, John and Reid, John and van Henten, Eldert (2016) Robotics in agriculture and forestry. In: Springer handbook of robotics, 2nd ed. Springer-Verlag, Berlin, Germany, pp. 1463-1492. ISBN 978-3-319-32550-7

Brown, Jason and Khan, Jamil (2015) A predictive resource allocation algorithm in the LTE uplink for event based M2M applications. IEEE Transactions on Mobile Computing, 14 (12). pp. 2433-2446. ISSN 1536-1233

Baayens, Jocelyn and Wandel, Andrew P. (2015) Identification of burning and extinguishing behaviour in spray flames with spark ignition. In: Australian Combustion Symposium 2015, 7-9 Dec 2015, University of Melbourne, Victoria.

Burtenshaw, Ryan (2015) Developing an activity-based user interface for remote experimentation for science education in schools. [USQ Project]

Bellars, Andrew (2015) Vehicle energy usage. [USQ Project]

Billingsley, John and Ghude, Sarang (2015) Significant advance in logical predictive control. Electronics Letters, 51 (16). pp. 1240-1241. ISSN 0013-5194

Barua, Suchi and Das, Narottam and Nordholm, Sven and Razaghi, Mohammad (2015) Analysis of nonlinear pulse propagation characteristics in semiconductor optical amplifier for different input pulse shapes. International Journal of Electrical, Computer, Electronics and Communication Engineering, 9 (1). pp. 16-20. ISSN 1307-6892

Brookshaw, Iain James (2015) A general architecture for robotic swarms. [Thesis (PhD/Research)]

Bundschuh, Jochen and Yusaf, Talal and Maity, Jyoti Prakash and Nelson, Emily and Mamat, Rizalman and Mahlia, T. M. Indra (2014) Algae-biomass for fuel, electricity and agriculture [Editorial]. Energy, 78. pp. 1-3. ISSN 0360-5442

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2014) An overview of mechanical properties and durability of glass-fibre reinforced recycled mixed plastic waste composites. Materials and Design, 62. pp. 98-112. ISSN 0264-1275

Bundschuh, Jochen and Chen, Guangnan and Yusaf, Talal and Yan, Jinyue and Chen, Shulin (2014) Sustainable energy and climate protection solutions in agriculture [Editorial]. Applied Energy, 114. pp. 735-736. ISSN 0306-2619

Burton-Ree, Nicholas (2013) Hydroelectric generators for third world countries. [USQ Project]

Basson, Johan (2013) Analysis of the aerodynamic attributes of motor vehicles. [USQ Project]

Briskey, Kyle Gary (2013) Improving caravan design by modelling of airflow. [USQ Project]

Barrett, Roland (2013) Operating temperature of current carrying copper busbar conductors. [USQ Project]

Birch, Byrenn James Colin (2013) Simulation of fibre Bragg grating (FBG) reflection spectrums using OptiGrating. [USQ Project]

Billingsley, John (2013) The Turtle, a legged submerged inspection vehicle. In: 16th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines (CLAWAR 2013), 14-17 Jul 2013, Sydney, Australia.

Burgess, R. and Ahfock, A. (2013) Evaluation of neutral voltages in arc suppression coil systems. Australian Journal of Electrical and Electronics Engineering , 10 (1). pp. 127-136. ISSN 1448-837X

C

Close, Andrew James (2016) Operational characteristics of surge arresters within high voltage substations. [USQ Project]

Chandrasekar, Devanandh and Das, Narottam (2016) Modeling and analysis of GaAs solar cells for conversion efficiency improvement by reducing reflection losses. In: 16th International Conference on Numerical Simulation of Optoelectronic Devices (NUSOD 2016), 11-15 July 2016, Sydney, Australia.

Coppock, James (2015) Development of a Raspberry Pi based, SDI-12 sensor environmental data logger. [USQ Project]

Curran, Samuel James (2015) Optimized scheduling of water distribution network to reduce energy costs. [USQ Project]

Carlin, Steven (2015) An analysis of kinetic energy recovery systems and their potential for contemporary internal combustion engine powered vehicles. [USQ Project]

Costantini, Daniel (2015) Green IT - dynamic network topologies. [USQ Project]

Cooper, David (2015) Sensor platform for monitoring conveyor belt rollers. [USQ Project]

Cubero, Samuel N. and Billingsley, John (2015) Design concepts for an energy-efficient amphibious unmanned underwater vehicle. In: Machine vision and mechatronics in practice. Springer-Verlag, Heidelberg, Germany, pp. 209-223. ISBN 978-3-662-45513-5

Cubero, Samuel N. and Billingsley, John (2015) Game development tools for simulating robots and creating interactive learning experiences. In: Machine vision and mechatronics in practice. Springer-Verlag, Heidelberg, Germany, pp. 113-134. ISBN 978-3-662-45513-5

Camilleri, Heath A. (2014) Investigation of energy storage media to improve network voltage regulation. [USQ Project]

Chen, Ling and Tang, Chak Yin and Ku, Harry Siu-Lung and Tsui, Chi Pong and Chen, Xu (2014) Microwave sintering and characterization of polypropylene/multi-walled carbon nanotube/hydroxyapatite composites. Composites Part B: Engineering , 56. pp. 504-511. ISSN 1359-8368

Cubero, Samuel N. and Billingsley, John (2013) Simulating the kinematics and motions of robotic manipulators using 3D game development tools. In: 20th Annual International Conference on Mechatronics and Machine Vision in Practice (M2VIP 2013), 18-20 Sep 2013, Ankara, Turkey.

Cox, Scott (2013) Design of remote laboratory experiments for integration into MEC2402 – stress analysis. [USQ Project]

Couch, P. (2013) Subtransmission line cost reduction through optimised design, 132 kV Wellington-Dubbo case study. [USQ Project]

Chen, Ling and Tang, Chak Yin and Ku, Harry Siu Lung and Chen, Da Zhu and Tsui, Chi Pong (2013) Surface coating of poly-D-L-lactide/nano-hydroxyapatite composite scaffolds for dexamethasone-releasing function and wettability enhancement. In: Materials Science and Technology Conference (MS&T 2012): Next Generation Biomaterials and Surface Properties of Biomaterials , 27-31 Oct 2012, Pittsburgh, PA. United States.

Cao, Lei and Xiang, Wei (2013) Symbol detection with network coding in wireless channels. IEEE Communications Letters , 17 (8). pp. 1528-1531. ISSN 1089-7798

Chin, Chee Wen (2013) Simulation and experimental investigations on tribological characteristics of kenaf/thermoset composites. [Thesis (PhD/Research)]

D

Dau, Van Thanh and Dinh, Thien Xuan and Tran, Canh-Dung and Bui, Phong Nhu and Dinh Vien, Du and Phan, Hoa Thanh (2018) Fluidic mechanism for dual-axis gyroscope. Mechanical Systems and Signal Processing, 108. pp. 73-87. ISSN 0888-3270

Dau, Van Thanh and Dinh, Thien Xuan and Tran, Canh Dung and Bui, Tung Thanh and Phan, Hoa Thanh (2018) A study of angular rate sensing by corona discharge ion wind. Sensors and Actuators A: Physical, 277. pp. 169-180. ISSN 0924-4247

Dau, Van Thanh and Dinh, Thien Xuan and Tran, Canh-Dung and Terebessy, Tibor and Duc, Trinh Chu and Bui, Tung Thanh (2018) Particle precipitation by bipolar corona discharge ion winds. Journal of Aerosol Science, 124. pp. 83-94. ISSN 0021-8502

Dau, Van Thanh and Dinh, Thien Xuan and Bui, Tung Thanh and Tran, Canh-Dung (2018) Vortex flow generator utilizing synthetic jets by diaphragm vibration. International Journal of Mechanical Sciences, 142-143. pp. 432-439. ISSN 0020-7403

Dinh, Toan and Nguyen, Tuan-Khoa and Phan, Hoang-Phuong and Ghavamian, Ali and Tran, Canh-Dung and Dau, Thanh-Van and Nguyen, Nam-Trung and Dao, Dzung Viet (2018) Carbon nanotube four-terminal devices for pressure sensing applications. In: KES International Conferences on Sustainable Design and Manufacturing (SDM-18) and Sustainability in Energy and Buildings (SEB-18), 24-26 June 2018, Gold Coast, Australia.

Dau, Van thanh and Tran, Canh-Dung and Dinh, Thien Xuan and Dang, Lam Bao and Terebessy, Tibor and Bui, Tung Thanh (2018) Estimating the effect of asymmetric electrodes in bipolar discharge ion wind generator. IEEE Transactions on Dielectrics and Electrical Insulation, 25 (3). pp. 900-907. ISSN 1070-9878

Dau, Van Thanh and Dinh, Thien Xuan and Tran, Canh-Dung and Terebessy, Tibor and Bui, Tung Thanh (2018) Dual-pin electrohydrodynamic generator driven by alternating current. Experimental Thermal and Fluid Science, 97. pp. 290-295. ISSN 0894-1777

Dinh, Toan and Nguyen, Tuan-Khoa and Phan, Hoang-Phuong and Fastier-Wooller, Jarred and Tran, Canh-Dung and Nguyen, Nam-Trung and Dao, Dzung Viet (2018) Electrical resistance of carbon nanotube yarns under compressive transverse pressure. IEEE Electron Device Letters, 39 (4). pp. 584-587. ISSN 0741-3106

Dau, Van Thanh and Dinh, Thien Xuan and Dang, Lam Bao and Tran, Canh-Dung and Bui, Tung Thanh and Phan, Thanh Hoa (2018) Tri-axis convective accelerometer with closed-loop heat source. Sensors and Actuators A: Physical, 275. pp. 51-59. ISSN 0924-4247

Dinh, Toan and Nguyen, Tuan-Khoa and Phan, Hoang-Phuong and Fastier-Wooller, Jarred and Tran, Canh-Dung and Dao, Dzung Viet (2017) Fabrication of a sensitive pressure sensor using carbon nanotube micro-yarns. In: IEEE Sensors 2017 , 29 Oct - 1 Nov 2017, Glasgow, Scotland.

Deng, Layun and He, Hongchen and Chen, Zejun and Liu, Shan and Chevali, Venkata S. (2017) Effects of wood fiber size on the performance of biodegradable foam. Journal of Biobased Materials and Bioenergy, 11 (3). pp. 206-209. ISSN 1556-6560

Das, Narottam (2017) Introduction of nano-structured solar cells. In: Nanostructured solar cells. InTech, Rijeka, Croatia, pp. 1-4. ISBN 978-953-51-2935-6

Das, Narottam (2017) Nanostructured solar cells. InTech, Rijeka, Croatia. ISBN 978-953-51-2935-6

de Silva, S. W. and Du, A. and Senadeera, W. and Gu, Y. (2017) Strained graphitic carbon nitride for hydrogen purification. Journal of Membrane Science, 528. pp. 201-205. ISSN 0376-7388

Dinh, Thien Xuan and Dang, Lam Bao and Tran, Canh-Dung and Bui, Tung Thanh and Pham, Phuc Hong and Dau, Van Thanh (2017) Jet flow in a circulatory miniaturized system using ion wind. Mechatronics, 47. pp. 126-133. ISSN 0957-4158

Dau, Van Thanh and Dinh, Thien Xuan and Bui, Tung Thanh and Tran, Canh-Dung and Phan, Hoa Thanh and Terebessy, Tibor (2016) Corona based air-flow using parallel discharge electrodes. Experimental Thermal and Fluid Science, 79. pp. 52-56. ISSN 0894-1777

Dau, V. T. and Tran, C. D. and Bui, T. T. and Nguyen, V. D. X. and Dinh, T. X. (2016) Piezo-resistive and thermo-resistance effects of highly-aligned CNT based macrostructures. RSC Advances, 6 (108). pp. 106090-106095.

Dinh, Toan and Phan, Hoang-Phuong and Nguyen, Tuan-Khoa and Qamar, Afzaal and Foisal, Abu Riduan Md and Nguyen Viet, Thanh and Tran, Canh-Dung and Zhu, Yong and Nguyen, Nam-Trung and Viet Dao, Dzung (2016) Environment-friendly carbon nanotube based flexible electronics for noninvasive and wearable healthcare. Journal of Materials Chemistry C, 4 (42). pp. 10061-10068. ISSN 2050-7526

Dobson, Lindsay (2016) Dumper derailment investigation and development of custom check rail. [USQ Project]

De Leon, Adrian (2016) Improving caravan design by modelling of crosswind. [USQ Project]

Dortmans, Justin (2016) Overcoming asymmetrical communication delays in line current differential protection circuits. [USQ Project]

Das, Narottam and Islam, Syed (2016) Design and analysis of nano-structured gratings for conversion efficiency improvement in GaAs solar cells. Energies, 9 (9). pp. 1-13.

Dethan, Jacob Febryadi Nithanel (2016) Mathematical modelling of the nickel iron battery. [USQ Project]

Das, Narottam and Wongsodihardjo, Hendy and Islam, Syed (2016) A preliminary study on conversion efficiency improvement of a multi-junction PV cell with MPPT. In: Smart power systems and renewable energy system integration. Studies in Systems, Decision and Control (57). Springer, Switzerland, pp. 49-73. ISBN 978-3-319-30425-0

Das, Narottam and Ma, Wu and Islam, Syed (2015) Analysis of end-to-end delay characteristics for various packets in IEC 61850 substation communications system. In: 25th Australasian Universities Power Engineering Conference: Challenges for Future Grids (AUPEC 2015), 27-30 Sept 2015, Sydney, Australia.

de Freitas Pessoa, Daniel (2015) STATCOM DC bus voltage control and switching strategy analysis. [USQ Project]

Damirchi, Hojjat and Najafi, Gholam Hassan and Alizadehnia, Siamak and Ghobadian, Barat and Yusaf, Talal and Mamat, Rizalman (2015) Design, fabrication and evaluation of gamma-type stirling engine to produce electricity from biomass for the micro-CHP system. In: The 7th International Conference on Applied Energy – ICAE2015 .

Das, Narottam and Wong, Tze Jia and Islam, Syed (2015) Analysis of end-to-end delay characteristics among various packet sizes in modern substation communication systems based on IEC 61850. In: Asia-Pacific World Congress on Engineering 2015 (APWCE2015), 4-5th May 2015, Plantation Island, Fiji.

Das, Narottam and Wongsodihardjo, Hendy and Islam, Syed (2015) Modeling of multi-junction photovoltaic cell using MATLAB/ Simulink to improve the conversion efficiency. Renewable Energy, 74. pp. 917-924. ISSN 0960-1481

Dugdale, Paul Nicholas (2014) Arc flash protection of a low voltage motor control centre. [USQ Project]

Dugdale, Paul Nicholas (2014) Arc flash protection of a low voltage motor control centre (MCC). [USQ Project]

Dray, Kevin (2014) Optical access engine development. [USQ Project]

De Silva, Suchitra W. and Du, Aijun and Senadeera, Wijitha and Gu, YuanTong (2014) Neutral and charged boron-doped fullerenes for CO2 adsorption. Beilstein Journal Of Nanotechnology, 5. pp. 413-418. ISSN 2190-4286

Deo, Bharatendu (2014) All-electric LNG a viable alternative to conventional gas turbine driven LNG plant. [Thesis (PhD/Research)]

Dickmann, Keith and Kist, Alexander A. (2014) Remote networking laboratory development. In: 11th International Conference on Remote Engineering and Virtual Instrumentation (REV 2014), 26-28 Feb 2014, Porto, Portugal.

du Preez, M. and Wandel, Andrew P. (2013) Direct numerical simulations of passive scalars: effect of initial mixture fraction distribution on timescales. In: 7th Australian Combustion Symposium (ACS 2013), 6-8 Nov 2013, Perth, Australia.

Dobson, David (2013) Electro muscle stimulus system for wasted muscle rehabilitation. [USQ Project]

Dickmann, Keith (2013) Remote access laboratory design and installation. [USQ Project]

E

Etminan, Amin and Zambri, Harun and Sharifian, Ahmad (2017) Numerical investigation of nanofluid laminar forced convective heat transfer inside an equilateral triangular tube. In: 2016 International Conference on Environmental Engineering and Sustainable Development (CEESD 2016) , 9-11 Dec 2016, Sanya, China.

Etaati, Amir and Pather, Selvan and Cardona, Francisco and Wang, Hao (2016) Injection molded noil hemp fiber composites: interfacial shear strength, fiber strength, and aspect ratio. Polymer Composites, 37 (1). pp. 213-220. ISSN 0272-8397

Etminan, Amin and Zambri, Harun and Sharifian, Ahmad (2016) Numerical simulation of three dimensional turbulent flow structure and heat transfer in ribbed-straight, divergent and convergent ducts. International Journal of Mechanics, 10. pp. 362-367.

Etaati, Amir and Pather, Selvan and Rahman, Moloud and Wang, Hao (2015) Ground hemp fibers as filler/reinforcement for thermoplastic biocomposites. Advances in Materials Science and Engineering, 2015. ISSN 1687-8434

Edwards, D. (2014) Terrestrial laser scanning for 3D zone substation modelling and safety clearances. [USQ Project]

Etaati, Amir and Pather, Selvan and Fang, Zhengping and Wang, Hao (2014) The study of fibre/matrix bond strength in short hemp polypropylene composites from dynamic mechanical analysis. Composites Part B: Engineering, 62. pp. 19-28. ISSN 1359-8368

Etaati, Amir and Mehdizadeh, Saman Abdanan and Wang, Hao and Pather, Selvan (2014) Vibration damping characteristics of short hemp fibre thermoplastic composites. Journal of Reinforced Plastics and Composites, 33 (4). pp. 330-341. ISSN 0731-6844

Ellis, N. (2013) Inspection of power transmission lines using UAVs. [USQ Project]

Ennis, Rodney James (2013) ScramSpace hypersonic aerodynamic drag coefficient (CD) determined by free-flight experiments at TUSQ wind-tunnel. [USQ Project]

Etaati, A. and Wang, H. and Pather, S. and Yan, Z. and Mehdizadeh, S. Abdanan (2013) 3D X-ray microtomography study on fibre breakage in noil hemp fibre reinforced polypropylene composites. Composites Part B: Engineering, 50. pp. 239-246. ISSN 1359-8368

F

Fell, Bradley (2016) Design of a portable bushfire attenuation fence. [USQ Project]

Fergusson, Paul (2016) Light Fidelity (Li-Fi) prototype with Raspberry Pi. [USQ Project]

Field, Shaun (2015) Machine vision and sensing with an Android. [USQ Project]

Fernando, Sam and Thorpe, David and Goh, Steven (2014) Project-based innovation: perspective of construction organizations. In: 11th International Conference on Business Management Driving Productivity through Innovation: From Thought to Practice, 12 Dec 2014, University of Sri Jayawardenepura, Sri Lanka.

Fowler, Michael John (2014) Hypersonic rocket manoeuvre in the TUSQ facility. [USQ Project]

Fuata, James (2014) Quantifying the effects of convective aerodynamic heating over a double swept-wedge configuration at Mach 6. [USQ Project]

Fairbanks-Smith, Michael S. (2014) Use of fibre-optic (FBG) sensors in the structural health monitoring of a battlefield helicopter rotor blade. [USQ Project]

Francucci, G. and Manthey, N. W. and Cardona, F. and Aravinthan, T. (2014) Processing and characterization of 100% hemp-based biocomposites obtained by vacuum infusion. Journal of Composite Materials, 48 (11). pp. 1323-1335. ISSN 0021-9983

Fernando, S. and Thorpe, D. and Goh, S. (2013) Role of clients in driving innovation in construction projects. In: 38th Annual Australasian Universities Building Education Association Conference, 20-22 Nov 2013, The University of Auckland, New Zealand .

Fan, Xinchen (2013) Piecewise adaptive controller design based on ECP model 730 magnetic levitation system. [USQ Project]

Fang, Zhengping and Shang, Shuying and Wang, Hao (2013) Confinement of C60 nanoparticles on the dynamics of polystyrene studied by anelastic spectroscopy and rheometrics. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

G

Gunathilake, D. M. C. C. and Senanayaka, D. P. and Adiletta, G. and Senadeera, Wiji (2018) Drying of agricultural crops. In: Advances in agricultural machinery and technologies. Taylor & Francis (CRC Press), Boca Raton, United States, pp. 331-365. ISBN 978-1-4987-5412-5

Ge, Lei and Hamilton, Christopher and Febrina, Rahman Tasha and Rudolph, Victor and Rufford, Thomas E. (2018) A phase inversion polymer coating to prevent swelling and spalling of clay fines in coal seam gas wells. International Journal of Coal Science and Technology. ISSN 2095-8293

Ge, Lei and Lin, Rijia and Zhu, Zhonghua and Wang, Hao (2018) A nitrogen-doped electrocatalyst from metal-organic framework-carbon nanotube composite. Journal of Materials Research, 33 (5). pp. 538-545. ISSN 0884-2914

Guy, Ross (2016) Best practice management of industrial process control alarm floods. [USQ Project]

Gall, Michael (2016) Non-invasive methods for testing the integrity of bulkheads and/or deckheads during a fire. [USQ Project]

Gleeson, Jarrad (2016) Remotely operated telepresent robotics. [USQ Project]

Gao, Pan and Xiang, Wei and Peng, Qiang and Billingsley, John (2016) A rate–distortion optimized error-resilient algorithm for multi-view video coding. Circuits, Systems, and Signal Processing, 35 (1). pp. 301-323. ISSN 0278-081X

Gao, Pan (2016) Error-resilient multi-view video plus depth based 3-D video coding. [Thesis (PhD/Research)]

Gong, Wei and He, Dongning and Tao, Jinlong and Zhao, Pengfei and Kong, Lingxue and Luo, Yongyue and Peng, Zheng and Wang, Hao (2015) Formation of defects in the graphite oxidization process: a positron study. RSC Advances, 5 (108). pp. 88908-88914.

Graham, Sharon (2015) Investigation into the economic feasibility of grid-tied photovoltaic panel and storage systems. [USQ Project]

Gharehghani, A. and Hosseini, R. and Mirsalim, M. and Yusaf, Talal F. (2015) A comparative study on the first and second law analysis and performance characteristics of a spark ignition engine using either natural gas or gasoline. Fuel, 158. pp. 488-493. ISSN 0016-2361

Gharehghani, Ayatallah and Hosseini, Reza and Mirsalim, Mostafa and Jazayeri, S. Ali and Yusaf, Talal (2015) An experimental study on reactivity controlled compression ignition engine fueled with biodiesel/natural gas. Energy, 89. pp. 558-567. ISSN 0360-5442

Gao, Pan and Peng, Qiang and Xiang, Wei (2015) Error-resilient multi-view video coding using Wyner-Ziv techniques. Multimedia Tools and Applications, 74 (18). pp. 7957-7982. ISSN 1380-7501

Gharehghani, A. and Hosseini, R. and Mirsalim, M. and Yusaf, Talal F. (2015) A computational study of operating range extension in a natural gas SI engine with the use of hydrogen. International Journal of Hydrogen Energy, 40 (17). pp. 5966-5975. ISSN 0360-3199

Gow, Ingrid and Wandel, Andrew P. (2014) How do university engineering graduates influence high school students through mentoring programs. In: 25th Annual Conference of the Australasian Association for Engineering Education (AAEE 2014): Engineering the Knowledge Economy: Collaboration, Engagement and Employability , 8-10 Dec 2014, Wellington, New Zealand.

Groves, Lachlan (2014) Monitoring of remote stock watering points by still images using UHF. [USQ Project]

Gao, Pan and Xiang, Wei (2014) Rate-distortion optimized mode switching for error-resilient multi-view video plus depth based 3-D video coding. IEEE Transactions on Multimedia, 16 (7). pp. 1797-1808. ISSN 1520-9210

Goold, Bradley (2014) An innovative intelligent system for child care & safety applications using ZigBee Wireless Sensing Networks. [USQ Project]

Gu, YuanTong and Nguyen, Trung Dung and Oloyede, Adekunle and Senadeera, Wijitha (2014) Analysis of strain-rate dependent mechanical behavior of single chondrocyte: a finite element study. International Journal of Computational Methods, 11 (Suppl 1). pp. 1344005-1. ISSN 0219-8762

Gu, Shushi and Jiao, Jian and Zhang, Qinyu and Yang, Zhihua and Xiang, Wei and Cao, Bin (2014) Network-coded rateless coding scheme in erasure multiple-access relay enable communications. IET Communications, 8 (4). pp. 537-545. ISSN 1751-8628

Gibbings, Peter and Bowtell, Les (2013) Student focus groups. In: 24th Annual Conference of the Australasian Association for Engineering Education (AaeE 2013): Work Integrated Learning- Applying Theory to Practice in Engineering Education, 8-11 Dec 2013, Gold Coast, Australia.

Gharehghani, A. and Hosseini, R. and Yusaf, T. (2013) Investigation of the effect of additives to natural gas on heavy-duty SI engine combustion characteristics. Journal of Mechanical Engineering and Sciences, 5. pp. 677-687. ISSN 2289-4659

Geng, Jian and Wei, Zaixue and Wang, Xianling and Xiang, Wei and Yang, Dacheng (2013) Multiuser hybrid analog/digital beamforming for relatively large-scale antenna arrays. In: IEEE Globecom Workshops (GLOBECOM 2013), 9-13 Dec 2013, Atlanta, GA. United States.

Gharehghani, A. and Koochak, M. and Mirsalim, M. and Yusaf, Talal (2013) Experimental investigation of thermal balance of a turbocharged SI engine operating on natural gas. Applied Thermal Engineering, 60 (1-2). pp. 200-207. ISSN 1359-4311

Griinke, Tyler John (2013) Development of an artificial neural network (ANN) for predicting tribological properties of kenaf fibre reinforced epoxy composites (KFRE). [USQ Project]

Gao, Pan and Xiang, Wei and Billingsley, John and Zhang, Yongbing (2013) Error-resilient multi-view video coding for next generation 3-D video broadcasting. In: 4th International Conference on Information and Communication Technology Convergence (ICTC 2013): Future Creative Convergence Technologies for New ICT Ecosystems, 14-16 Oct 2013, Jeju Island, South Korea.

Geary, A. (2013) Model and analysis of a broken conductor (source isolated) earth fault on radial 11kV distribution feeders. [USQ Project]

H

Herath, H. M .C. M. and Epaarachchi, J. A. and Islam, M. M. and Al-Azzawi, W. and Leng, J. and Zhang, F. (2018) Structural performance and photothermal recovery of carbon fibre reinforced shape memory polymer. Composites Science and Technology, 167. pp. 206-214. ISSN 0266-3538

Herath, Madhubhashitha and Al-Azzawi, Wessam and Epaarachchi, Jayantha and Islam, Mainul and Robertson, Scott and Leng, Jinsong and Zhang, F. (2018) Thermo-mechanical behaviour and shape memory characteristics of carbon fibre reinforced epoxy. In: 2018 International Conference on Nanoscience and Nanotechnology (ICONN 2018) , 29 Jan - 2 Feb 2018, Wollongong, NSW, Australia.

Helwig, Andreas and Logan, Alicia and Tranter, Mark (2018) Park your solar: Australia's largest solar car park. ReNew: Alternative Technology Association (National Magazine), Jan-March 2018 (142). pp. 56-58. ISSN 1327-1938

Hashempour, Javad and Sharifian, Ahmad (2017) Effective factors on the performance of woven wire screens against leaf firebrand attacks. Journal of Fire Sciences, 35 (4). pp. 303-316. ISSN 0734-9041

Haidar, Ahmed M. A. and Benachaibab, Chellali and Julaia, Norhuzaimin and Malek, Mohamed Fareq Abdul (2017) Parameters extraction of Unified Power Quality Conditioner on the calculation of a membership function. International Journal on Electrical Engineering and Informatics, 9 (2). pp. 244-258. ISSN 2085-6830

Haidar, Ahmed M. A. and Muttaqi, Kashem M. and Hagh, Mehrdad Tarafdar (2017) A coordinated control approach for DC link and rotor crowbars to improve fault ride-through of DFIG based wind turbines. IEEE Transactions on Industry Applications, 53 (4). pp. 4073-4086. ISSN 0093-9994

Haidar, Ahmed M. A. and bin Hj Othman, Al-Khalid and Lopes, Luiz A. C. (2017) Flexibility-based anti-islanding protection of a microgrid integrated with power grid. In: 5th IEEE International Conference on Smart Energy Grid Engineering (SEGE 2017) , 14-17 Aug 2017 , Oshawa, Canada .

Hoang, Hung (2016) Automatic Circuit Recloser (ACR) communications using P25 RMU (Radio Modem Unit). [USQ Project]

Ho, Phuc L. H. and Le, Canh V. and Tran-Cong, Thanh (2016) Displacement and equilibrium mesh-free formulation based on integrated radial basis functions for dual yield design. Engineering Analysis with Boundary Elements, 71. pp. 92-100. ISSN 0955-7997

Hourigan, Karen (2016) Effect of distributed photovoltaic embedded generation on the electricity distribution network. [USQ Project]

Hairuddin, A. Aziz and Yusaf, Talal and Wandel, Andrew P. (2016) Single-zone zero-dimensional model study for diesel-fuelled homogeneous charge compression ignition (HCCI) engines using Cantera. International Journal of Automotive and Mechanical Engineering, 13 (2). pp. 3309-3328. ISSN 2229-8649

Habibi, H. and Koma, A. Yousefi and Sharifian, A. (2016) Power and velocity control of wind turbines by adaptive fuzzy controller during full load operation. Iranian Journal of Fuzzy Systems, 13 (3). pp. 35-48. ISSN 1735-0654

Haidar, Ahmed M. A. and Muttaqi, Kashem M. (2016) Behavioral characterization of electric vehicle charging loads in a distribution power grid through modeling of battery chargers. IEEE Transactions on Industry Applications, 52 (1). pp. 483-492. ISSN 0093-9994

Hashempour, Javad and Sharifian, Ahmad and Billingsley, John (2016) Experimental measurement of direct thermal radiation through single-layer square-cell plain woven screens. Journal of Heat Transfer: Transactions of the ASME, 138 (1). 012701-1-012701-6. ISSN 0022-1481

Helwig, Andreas (2016) Applied research in energy storage. In: Smart power systems and renewable energy system integration. Studies in Systems, Decision and Control, 57. Springer International Publishing, Switzerland, pp. 179-200. ISBN 978-3-319-30425-0

Hashempour, Javad (2016) Investigating potential of metal mesh to contain wildfires. [Thesis (PhD/Research)]

He, Dong-Ning and Hodgson, Peter and Gao, Wei-Min (2015) Epitaxial growth of multi-structure SnO2 by chemical vapor deposition. Acta Metallurgica Sinica (English Letters), 28 (7). pp. 946-950. ISSN 1006-7191

He, Dongning and Peng, Zheng and Gong, Wei and Luo, Yongyue and Zhao, Pengfei and Kong, Lingxue (2015) Mechanism of a green graphene oxide reduction with reusable potassium carbonate. RSC Advances, 5 (16). pp. 11966-11972.

Ho, Mei-po and Lau, Kin-tak and Wang, Hao and Hui, David (2015) Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles. Composites Part B: Engineering, 81. pp. 14-25. ISSN 1359-8368

Haidar, Ahmed M. A. and Muttaqi, Kashem and Sutanto, Danny (2015) Smart Grid and its future perspectives in Australia. Renewable and Sustainable Energy Reviews, 51. pp. 1375-1389. ISSN 1364-0321

Hohenhaus, Paul (2015) Remote management of safety systems in power utility installations. [USQ Project]

Habibpour, Atefeh and Das, Narottam (2015) Analysis of optical pulse’s position effect on temporal response characteristics of GaAs metal-semiconductor-metal photodetector. World Applied Sciences Journal, 33 (9). pp. 1440-1445. ISSN 1818-4952

Hou, Yonghong and Wang, Pichao and Xiang, Wei and Gao, Zhimin and Hou, Chunping (2015) A novel rate control algorithm for video coding based on fuzzy-PID controller. Signal, Image and Video Processing , 9 (4). pp. 875-884. ISSN 1863-1703

Hashempour, Javad and Sharifian, Ahmad and Billingsley, John (2015) Bushfire traps: the application of mesh screens to contain bushfires. In: 2015 Fire Protection Australia Conference (FPA2015), 25-26 March 2015, Gold coast, Australia.

Hellier, Paul and Ladommatos, Nicos and Yusaf, Talal (2015) The influence of straight vegetable oil fatty acid composition on compression ignition combustion and emissions. Fuel, 143. pp. 131-143. ISSN 0016-2361

Helwig, Andreas and Ahfock, Tony (2015) A case study: is energy storage affordable for further Australian sustainable energy development? In: 25th Australasian Universities Power Engineering Conference: Challenges for Future Grids (AUPEC 2015), 27-30 Sept 2015, Wollongong, NSW.

Haidar, Ahmed M. A. and Muttaqi, Kashem M. and Hagh, Mehrdad T. (2015) A coordinated control approach for DC link and rotor crowbars to improve fault ride-through of DFIG based wind turbines. In: 2015 IEEE Industry Applications Society Annual Meeting (IAS 2015), 18-22 Oct 2015 , Addison, Texas, USA .

Haidar, Ahmed M. A. and Muttaqi, Kashem M. (2015) Effects of PEV penetration on voltage unbalance. In: Plug in electric vehicles in smart grids. Power Systems. Springer Science+Business Media, Singapore, pp. 279-307.

Hagh, M. Tarafdar and Muttaqi, K. M. and Sutanto, D. and Hossain, M. S. A. and Haidar, Ahmed M. A. (2015) Improving fault ride-through capability of DFIG based wind generators by using bridge-type superconducting fault current limiter. In: 50th International Universities Power Engineering Conference (UPEC 2015), 1-4 Sept 2015 , Stoke on Trent, United Kingdom.

Haidar, Ahmed M. A. and Hagh, Mehrdad T. and Muttaqi, Kashem M. (2015) Improving low voltage ride-through using super capacitor at the DC link of doubly-fed induction generator based wind turbine. In: 50th International Universities Power Engineering Conference (UPEC 2015), 1-4 Sept 2015, Stoke on Trent, United Kingdom.

Haidar, Ahmed M. A. and Muttaqi, Kashem M. and Haque, Mohammed H. (2015) Multistage time-variant electric vehicle load modelling for capturing accurate electric vehicle behaviour and electric vehicle impact on electricity distribution grids. IET Generation, Transmission & Distribution, 9 (16). pp. 2705-2716. ISSN 1751-8687

Hairuddin, A. A. and Wandel, A. P. and Yusaf, T. (2014) An introduction to a homogeneous charge compression ignition engine. Journal of Mechanical Engineering and Sciences, 7. pp. 1042-1052. ISSN 2289-4659

Hogan, Matthew Julian (2014) A test facility for assessing the performance of IEC61850 substation automation designs. [USQ Project]

Hairuddin, A. Aziz and Yusaf, Talal and Wandel, Andrew P. (2014) A review of hydrogen and natural gas addition in diesel HCCI engines. Renewable and Sustainable Energy Reviews, 32. pp. 739-761. ISSN 1364-0321

Helwig, Andreas and Ravoniharimanana, Masinavolana Lalaina and Andrianosoloniaina, Manitra J. Benjamin (2014) An overview of project Madagascar's tri-lingual education project development: 2005-2014. International Journal of Pedagogies and Learning, 9 (3). pp. 327-338. ISSN 1833-4105

Hoang-Trieu, Thuy-Tram (2014) Compact approximation stencils based on integrated radial basis functions for fluid flows. [Thesis (PhD/Research)]

Hairuddin, Abdul Aziz (2014) Implementation of conditional moment closure in a zero-dimensional model for HCCI engines and comparison with experiment. [Thesis (PhD/Research)]

Habibpour, A. and Das, N. and Mashayekhi, H. R. (2014) Numerical modeling of the temporal response of back-gated metal-semiconductor-metal photodetector in an equilibrium condition. Iranian Journal of Science & Technology, 38 (A4). pp. 441-444. ISSN 1028-6276

Hairuddin, Abdul Aziz and Yusaf, Talal and Wandel, Andrew (2013) Effect of different heat transfer models on a diesel homogeneous charge compression ignition engine. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1292-1304. ISSN 2229-8649

Hairuddin, A. Aziz and Yusaf, Talal and Wandel, Andrew P. (2013) Implementation of CMC in a 0-D single-zone model of a diesel HCCI engine. In: 7th Australian Combustion Symposium (ACS 2013), 6-8 Nov 2013, Perth, Australia .

Herriman, Kayne (2013) Small compressed air energy storage systems. [USQ Project]

Helwig, Andreas and Ahfock, Tony (2013) Extending SWER line capacity. In: 23rd Australasian Universities Power Engineering Conference (AUPEC 2013), 29 Sep–3 Oct 2013, Hobart, Australia.

Helwig, Andreas and Ahfock, Tony (2013) Long-life nickel iron battery functionality/cost comparison for peak demand SWER network voltage support application. In: 23rd Australasian Universities Power Engineering Conference (AUPEC 2013), 29 Sep–3 Oct 2013, Hobart, Australia.

Huang, Shuangping and Yue, Xuejun and Hong, Tiansheng and Wu, Weibin and Li, Yunyu (2013) Potassium content prediction model of citrus leaves in different phenological period. Journal of Jiangsu University (Natural Science Edition) , 34 (5). pp. 529-535. ISSN 1671-7775

Hairuddin, A. Aziz and Wandel, Andrew P. and Yusaf, Talal (2013) A homogeneous charge compression ignition engine: an introduction. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2013) Effect of eccentricity on the behavior of pultruded FRP bolted joint. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2013) Wave propogation scattering due to defect on thin composite plates. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Hafizi, Z. M. and Kahandawa, G. C. and Epaarachchi, J. and Lau, K. T. and Canning, J. and Cook, K. (2013) NIR fibre bragg grating as dynamic sensor: an application of 1D digital wavelet analysis for signal denoising. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Hashempour, Javad and Sharifian, Ahmad (2013) Optimizing the coupling of a firebrand generator to a horizontal wind tunnel. Advanced Materials Research, 726-731. pp. 971-976. ISSN 1022-6680

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2013) An investigation of acoustic emission signal attenuation for monitoring of progressive failure in fiberglass reinforced composite laminates. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1442-1456. ISSN 2229-8649

Hou, Yonghong and Wang, Pichao and Xiang, Wei and Zhao, Xiaoming and Hou, Chunping (2013) Ergodic capacity analysis of spatially modulated systems. China Communications , 10 (7). pp. 118-125. ISSN 1673-5447

I

Ismail, A. F. and Anuar, A. and Rashmi, W. and Yusaf, T. (2014) Corrosion effects of CNT-nanofluids on different metals. In: 3rd International Conference on Advanced Materials and Information Technology Processing (AMITP 2013), 1-2 Dec 2013, Los Angeles, United States.

Ismail, A. F. and Abd-Halim, B. A. and Rashmi, W. and Yusaf, T. (2014) Smaller radiator with enhanced heat transfer using CNT-nanofluids. In: International Conference on Future Energy, Environment, and Materials (FEEM 2013), 24-25 Dec 2013, Hong Kong.

Ikin, James (2013) Design and development of a fibre optic microphone. [USQ Project]

J

Javazmi, L. and Hosseini Ravandi, S. A. and Sharifkhani, M. E. (2018) Effect of TiO2 nanoparticle on wicking phenomenon in PAN nanofiber yarns. In: 2018 International Conference on Nanoscience and Nanotechnology (ICONN 2018), 29 Jan - 2 Feb 2018, Wollongong, Australia .

Jahirul, M. I. and Brown, R. J. and Senadeera, W. (2018) Correlation between physiochemical properties and quality of biodiesel. In: Application of thermo-fluid processes in energy systems: key issues and recent developments for a sustainable future. Green Energy and Technology. Springer, Singapore, pp. 57-81. ISBN 978-981-10-0695-1

Jing, Baocong and Wandel, Andrew P. (2017) Numerical investigation into natural gas–diesel dual-fuel engine configuration. In: 11th Asia-Pacific Conference on Combustion, 10-14 Dec 2017, Sydney, Australia.

Javazmi, Leila and Khoddami, Akbar and Mazrouei-Sebdani, Zahra and Shams-Ghahfarokhi, Farzaneh and Low, Tobias (2017) Fabrication of a silica aerogel and examination of its hydrophobic properties via contact angle and 3M water repellency tests. In: 2017 5th International Conference on Nano and Materials Engineering (ICNME 2017), 1-3 April 2017, Bali, Indonesia.

Jarvinen, Jarkko (2016) Extraction of ECGs for twin pregnancies. [USQ Project]

Jaalam, N. and Rahim, N. A. and Bakar, A. H. A. and Tan, ChiaKwang and Haidar, Ahmed M. A. (2016) A comprehensive review of synchronization methods for grid-connected converters of renewable energy source. Renewable and Sustainable Energy Reviews, 59. pp. 1471-1481. ISSN 1364-0321

Javazmi, L. and Khodami, A. and Mazrouei-Sebdani, Z. and Epaarachchi, J. (2016) Effect of a nano-fibrous structure on the nanofiber mat's hydrophobicity. In: 2016 International Conference on Nanoscience and Nanotechnology (ICONN 2016) , 07-11 Feb 2016, Canberra, Australia.

Jahirul, M. I. and Brown, R. J. and Senadeera, W. and Ashwath, N. and Rasul, M. G. and Rahman, M. M. and Hossain, Farhad M. and Moghaddam, Lalehvash and Islam, M. A. and O'Hara, I. M. (2015) Physio-chemical assessment of beauty leaf (Calophyllum inophyllum)as second-generation biodiesel feedstock. Energy Reports, 1. pp. 204-215.

Jiang, Jennifer (2015) Demand Management Storage Project (DMSP) – an application of grid scale battery energy storage systems. [USQ Project]

John, Benjamin Allan (2014) Optimisation of an electric powered air-gliding skateboard. [USQ Project]

Jahirul, Mohammad I. and Koh, Wenyong and Brown, Richard J. and Senadeera, Wijitha and O'Hara, Ian and Moghaddam, Lalehvash (2014) Biodiesel production from non-edible beauty leaf (Calophyllum inophyllum) oil: process pptimization using response surface methodology (RSM). Energies, 7 (8). pp. 5317-5331. ISSN 1996-1073

University of Southern Queensland (2014) An aerolance system. WO2014008549 (A1).

Jahirul, M. I. and Senadeera, W. and Brown, R. J. and Moghaddam, L. (2014) Estimation of biodiesel properties from chemical composition – an artificial neural network (ANN) approach. International Scientific Journal of Environmental Science, 3 (3). pp. 1-7. ISSN 978-1499721980

Jahirul, M. L. and Senadeera, W. and Brooks, P. and Brown, R. J. and Situ, R. and Pham, P. X. and Masri, A. R. (2013) An artificial neutral network (ANN) model for predicting biodiesel kinetic viscosity as a function of temperature and chemical compositions. In: 20th International Congress on Modelling and Simulation (MODSIM 2013): Adapting to Change: The Multiple Roles of Modelling , 1-6 Dec 2013, Adelaide, Australia.

Janse van Rensburg, Barnard (2013) The development of a light weight composite conveyor belt idler roller. [USQ Project]

Johnstone, C. (2013) Wireless communication between dataNode systems. [USQ Project]

Jahirul, M. I. and Brown, J. R. and Senadeera, W. and Aswath, N. and Laing, C. and Leski-Taylor, J. and Rasul, M. G. (2013) Optimisation of bio-oil extraction process from Beauty Leaf (Calophyllum inophyllum) oil seed as a second generation biodiesel source. Procedia Engineering, 56. pp. 619-624.

Jahirul, Mohammed I. and Brown, Richard J. and Senadeera, Wijitha and O'Hara, Ian M. and Ristovski, Zoran D. (2013) The use of artificial neural networks for identifying sustainable biodiesel feedstocks. Energies, 6 (8). pp. 3764-3806. ISSN 1996-1073

K

Kakei, Ayad and Epaarachchi, J. A. and Islam, Mainul and Leng, J. (2018) Evaluation of delamination crack tip in woven fibre glass reinforced polymer composite using FBG sensor spectra and thermo-elastic response. Measurement, 122. pp. 178-185. ISSN 0263-2241

Kakei, Ayad Arab and Islam, Mainul and Leng, Jingsong and Epaarachchi, Jayantha A. (2018) Use of an elasto-plastic model and strain measurements of embedded fibre Bragg grating sensors to detect Mode I delamination crack propagation in woven cloth (0/90) composite materials. Structural Health Monitoring, 17 (2). pp. 363-378. ISSN 1475-9217

Kakei, Ayad and Epaarachchi, Jayantha A. (2018) Use of fiber Bragg grating sensors for monitoring delamination damage propagation in glass-fiber reinforced composite structures. Frontiers of Optoelectronics, 11 (1). pp. 60-68. ISSN 2095-2759

Konarova, Muxina and Aslam, Waqas and Ge, Lei and Ma, Qing and Tang, Fengqiu and Rudolph, Victor and Beltramini, Jorge Norberto (2017) Enabling process intensification by 3D printing of catalytic structures. ChemCatChem, 9 (21). pp. 4132-4138. ISSN 1867-3880

Karunasena, H. C. P. and Senadeera, Wijitha (2017) Numerical modeling of morphological changes of food plant materials during drying. In: Handbook of drying of vegetables and vegetable materials. Advances in Drying Science and Technology. Taylor & Francis (CRC Press), Boca Raton, FL, United States, pp. 387-427. ISBN 13:978-1-4987-5386-9

Khan, Ziaullah and Yousif, B. F. and Islam, Mainul (2017) Fracture behaviour of bamboo fiber reinforced epoxy composites. Composites Part B: Engineering, 116. pp. 186-199. ISSN 1359-8368

Khan, Belas Ahmed and Na, Haining and Chevali, Venkata and Warner, Philip and Zhu, Jin and Wang, Hao (2017) Glycidyl methacrylate-compatibilized poly(lactic acid)/hemp hurd biocomposites: processing, crystallization, and thermo-mechanical response. Journal of Materials Science & Technology. ISSN 1005-0302

Kumar, Shantanu and Das, Narottam and Islam, Syed (2016) Performance monitoring of a PMU in a microgrid environment based on IEC 61850-90-5. In: 26th Australasian Universities Power Engineering Conference (AUPEC 2016), 25-28 Sept 2016, Brisbane, Australia.

Kaur, Amrit Pal and Helwig, Andreas and Das, Narottam (2016) SFRA transformer reliability engineering modelling for undergraduates. In: 26th Australasian Universities Power Engineering Conference (AUPEC 2016), 25-28 Sept 2016, Brisbane, Australia.

Kumar, Shantanu and Das, Narottam and Islam, Syed (2016) Software implementation of two seamless redundant topologies in a digital protection system based on IEC 62439-3. In: 26th Australasian Universities Power Engineering Conference (AUPEC 2016), 25-28 Sept 2016, Brisbane, Australia.

Khan, Belas A. and Chevali, Venkata S. and Na, Haining and Zhu, Jin and Warner, Philip and Wang, Hao (2016) Processing and properties of antibacterial silver nanoparticle-loaded hemp hurd/poly(lactic acid) biocomposites. Composites Part B: Engineering, 100. pp. 10-18. ISSN 1359-8368

Kumar, Shantanu and Das, Narottam and Islam, Syed (2016) Protection redundancy in a digital network within a high voltage utility substation based on IEC 62439-3. In: 10th Australian Protection Symposium 2016, 16-17 Aug 2016, Melbourne, Australia.

Kakei, Ayad and Epaarachchi, J. A. and Islam, Mainul and Leng, J. and Rajic, N. (2016) Detection and characterisation of delamination damage propagation in woven glass fibre reinforced polymer composite using thermoelastic response mapping. Composite Structures, 153. pp. 442-450. ISSN 0263-8223

Kandare, Everson and Di Modica, Pietro and Chevali, Venkata S. and Gibson, Geoff A. (2016) Evaluating the heat resistance of thermal insulated sandwich composites subjected to a turbulent fire. Fire and Materials , 40 (4). pp. 586-598. ISSN 0308-0501

Kakei, Ayad Arab Ghaidan and Epaarachchi, Jayantha Ananda and Islam, M. Mainul and Leng, Jinsong (2016) Development of fracture and damage modeling concepts for composite materials. In: Structural health monitoring technologies and next-generation smart composite structures. Composite Materials: Analysis and Design. Taylor & Francis (CRC Press), Roca Raton, USA, pp. 341-368. ISBN 978-1-4822-2691-1

Kist, Alexander A. and Maiti, Ananda and Maxwell, Andrew D. and Orwin, Lindy and Albion, Peter and Wu, Ting (2016) The game and activity environment of RALfie: remote access laboratories for fun, innovation and education. In: 13th International Conference on Remote Engineering and Virtual Instrumentation (REV 2016), 24-26 Feb 2016, Madrid, Spain.

Kist, Alexander A. and Maiti, Ananda and Maxwell, Andrew and Orwin, Lindy and Wu, Ting and Albion, Peter and Burtenshaw, Ryan (2016) Hosting and sharing your own remote experiments with RALfie – an open ended experiment design experience. International Journal of Online Engineering, 12 (4). pp. 40-42. ISSN 1868-1646

Kumar, Shantanu and Das, Narottam and Islam, Syed (2015) Performance evaluation of a process bus architecture in a zone substation based on IEC 61850-9-2. In: 2015 IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC 2015), 15-18 Nov 2015, Brisbane, Australia.

Kubler, Kristy A C (2015) Optimisation of off-highway truck fuel consumption through mine haul road design. [USQ Project]

Kaliyev, Vladislav (2015) Axial Flux Permanent Magnet coreless machine. [USQ Project]

Kirby, Christopher (2015) Comparison of PV maximum power point. [USQ Project]

Kumar, Shantanu and Das, Narottam and Islam, Syed (2015) High performance communication redundancy in a digital substation based on IEC 62439-3 with a station bus configuration. In: 25th Australasian Universities Power Engineering Conference 2015: Challenges for Future Grids (AUPEC 2015), 27-30 Sept 2015, Wollongong, Australia.

Kist, Alexander A. and Maiti, Ananda and Maxwell, Andrew D. (2015) Introducing RALfie – remote access laboratories for fun, innovation and education. In: 3rd Experiment@International Conference 2015: Online Experimentation (exp.at'15), 2-4 June 2015, Ponta Delgada, Portugal.

Boeing Aircraft Co. (2015) Signal monitoring system for monitoring strain applied to a composite component. .

Khan, Belas Ahmed and Wang, Jing and Warner, Philip and Wang, Hao (2015) Antibacterial properties of hemp hurd powder against E. coli. Journal of Applied Polymer Science, 132 (10). 41588/1-41588/6. ISSN 0021-8995

Karunasena, H. C. P. and Gu, Y. T. and Brown, R. J. and Senadeera, W. (2015) Numerical investigation of plant tissue porosity and its influence on cellular level shrinkage during drying. Biosystems Engineering, 132. pp. 71-87. ISSN 1537-5110

Koech, Richard and Mossad, Ruth and Smith, Rod and Gillies, Malcolm (2015) CFD study of the hydraulic performance of large-diameter gated fluming. Journal of Irrigation and Drainage Engineering, 141 (2). pp. 1-7. ISSN 0733-9437

Karunasena, H. C. P. and Brown, R. J. and Gu, Y. T. and Senadeera, W. (2015) Application of meshfree methods to numerically simulate microscale deformations of different plant food materials during drying. Journal of Food Engineering, 146. pp. 209-226. ISSN 0260-8774

Karunasena, H. C. P. and Gu, Y.T. and Brown, R. J. and Senadeera, W. (2015) Numerical investigation of case hardening of plant tissue during drying and its influence on the cellular-level shrinkage. Drying Technology, 33 (6). pp. 713-734. ISSN 0737-3937

Kist, Alexander A. (2014) Supporting student engagement with capstone project presentations. In: 25th Annual Conference of the Australasian Association for Engineering Education (AAEE 2014): Engineering the Knowledge Economy: Collaboration, Engagement and Employability , 8-10 Dec 2014, Wellington, New Zealand.

Kennedy, Isaac (2014) Design and development of a fibre-optic microphone. [USQ Project]

Kruger, Rick William (2014) Kinetic energy recovery in motor vehicles using compressed gas. [USQ Project]

Keys, Callum Kirby (2014) Mansell power lifter control circuitry redesign. [USQ Project]

Kraetzig, Benjamin and Buttsworth, David R. and Zander, Fabian and Loehle, Stefan (2014) Temperature and heat flux measurement on hot models in short-duration facilities. Journal of Thermophysics and Heat Transfer, 29 (1). pp. 37-46. ISSN 0887-8722

Karunasena, H. C. P. and Senadeera, W. and Brown, R. J. and Gu, Y. T. (2014) A particle based model to simulate microscale morphological changes of plant tissues during drying. Soft Matter, 10 (29). pp. 5249-5268. ISSN 1744-683X

Karunasena, H. C. P. and Senadeera, W. and Brown, R. J. and Gu, Y. T. (2014) A mesh free model for plant tissue deformations during drying. Australian and New Zealand Industrial and Applied Mathematics (ANZIAM) Journal, 55 (EMAC2013). C110-C137. ISSN 1446-1811

Karunasena, H. C. P. and Senadeera, W. and Brown, R. J. and Gu, Y. T. (2014) Simulation of plant cell shrinkage during drying – a SPH–DEM approach. Engineering Analysis and Boundary Elements, 44. pp. 1-18. ISSN 0955-7997

Khan, Belas Ahmed and Warner, Philip and Wang, Hao (2014) Antibacterial properties of hemp and other natural fibre plants: a review. BioResources, 9 (2). pp. 3642-3659.

Kraetzig, Benjamin and Lohle, Stefan and Buttsworth, David (2014) Evolution of plasma species and heat – shield temperatures from Hayabusa Reentry Observation. Journal of Spacecraft and Rockets, 51 (3). pp. 823-837. ISSN 0022-4650

Karunasena, H. C. P. and Hesami, P. and Senadeera, W. and Gu, Y. T. and Brown, R. J. and Oloyede, A. (2014) Scanning electron microscopic study of microstructure of gala apples during hot air drying. Drying Technology, 32 (4). pp. 455-468. ISSN 0737-3937

Karunasena, H. C. P. and Senadeera, W. and Gu, Y. T. and Brown, R. J. (2014) A coupled SPH-DEM model for micro-scale structural deformations of plant cells during drying. Applied Mathematical Modelling, 38 (15-16). pp. 3781-3801. ISSN 0307-904X

Karunasena, H. C. P. and Senadeera, W. and Brown, R. J. and Gu, Y. T. (2014) A novel approach for numerical simulation of plant tissue shrinkage during drying. In: International Research Symposium on Postharvest Technology 2014: Safe Food for Healthy Life, 19 June 2014, Anuradapura, Sri-Lanka.

Kist, Alexander A. and Maiti, Ananda and Maxwell, Andrew D. and Orwin, Lindy and Midgley, Warren and Noble, Karen and Ting, Wu (2014) Overlay network architectures for peer-to-peer Remote Access Laboratories. In: 11th International Conference on Remote Engineering and Virtual Instrumentation (REV 2014), 26-28 Feb 2014, Porto, Portugal.

Kahandawa, Gayan C. and Epaarachchi, Jayantha and Wang, Hao and Canning, John and Lau, K. T. (2013) Extraction and processing of real time strain of embedded FBG sensors using a fixed filter FBG circuit and an artificial neural network. Measurement: Journal of the International Measurement Confederation , 46 (10). pp. 4045-4051. ISSN 0263-2241

Kist, Alexander A. and Phythian, Mark (2013) Peer assessment of recorded student presentations. In: 24th Annual Conference of the Australasian Association for Engineering Education (AAEE 2013): Work Integrated Learning - Applying Theory to Practice in Engineering Education, 8-11 Dec 2013, Gold Coast, Australia.

Kerr, Mitchell (2013) Axisymmetric scramjet inlet operation with varying cowl positions. [USQ Project]

Keller, Jason (2013) Optimisation of the spoked bicycle wheel. [USQ Project]

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. (2013) Tensile properties of chemically treated hemp fibres as reinforcement for composites. Composites Part B: Engineering , 53. pp. 362-368. ISSN 1359-8368

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Lau, K. T. (2013) Indexing damage using distortion of embedded FBG sensor response spectra. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Ku, H. and Trada, Mohan (2013) Tensile properties of nanoclay reinforced epoxy composites. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Kasolang, S. and Ahmed, Diyar I. and Dwyer-Joyce, R. S. and Yousif, B. F. (2013) Performance analysis of journal bearings using ultrasonic reflection. Tribology International, 64. pp. 78-84. ISSN 0301-679X

Kist, Alexander A. and Maiti, Ananda and Maxwell, Andrew D. and Orwin, Lindy (2013) Performance evaluation of network architectures for collaborative real-time learning systems. In: 2nd IEEE International Conference on Teaching, Assessment and Learning for Engineering (TALE 2013), 26-29 Aug 2013, Kuta, Indonesia.

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. (2013) Effects of chemical treatments on hemp fibre structure. Applied Surface Science , 276. pp. 13-23. ISSN 0169-4332

L

Leis, John W. (2018) Communication systems principles using MATLAB. John Wiley & Sons, Inc., Hoboken, NY, United States. ISBN 978-1-119-47067-0

Liu, Shan and Chevali, Venkata S. and Xu, Zhiguang and Hui, David and Wang, Hao (2018) A review of extending performance of epoxy resins using carbon nanomaterials. Composites Part B: Engineering, 136 (1). pp. 197-214. ISSN 1359-8368

Lin, Rijia and Villacorta Hernandez, Byron and Ge, Lei and Zhu, Zhonghua (2018) Metal organic frameworks based mixed matrix membrane: An overview on filler/polymer interface. Journal of Materials Chemistry A, 6 (2). pp. 293-312. ISSN 2050-7488

Leis, John and Buttsworth, David (2017) Determining the convergence of synchronous measurements for embedded industrial applications. IEEE Transactions on Industrial Electronics, 64 (9). ISSN 0278-0046

Le-Cao, K. and Phan-Thien, N. and Khoo, B. C. and Mai-Duy, N. (2017) A dissipative particle dynamics model for thixotropic materials exhibiting pseudo-yield stress behaviour. Journal of Non-Newtonian Fluid Mechanics, 241. pp. 1-13. ISSN 0377-0257

Li, Lefan and Zhao, Pengfei and Luo, Yongyue and Yu, Heping and Tao, Jinlong and He, Dongning and Gong, Wei and Li, Dejun and Peng, Zheng and Wang, Zhifen (2017) Compatibility-tuned distribution of nanoparticles in co-continuous rubber structures toward microwave absorption enhancement. RSC Advances, 7 (2). pp. 1093-1100.

Leis, John and Buttsworth, David (2017) A robust method for tuning photoacoustic gas detectors. IEEE Transactions on Industrial Electronics (99). ISSN 0278-0046

Li, Tianning and Wen, Peng (2017) Depth of anaesthesia assessment using interval second-order difference plot and permutation entropy techniques. IET Signal Processing, 11 (2). pp. 221-227. ISSN 1751-9675

Li, Qiang (2017) Modelling the compressive strength and thermal properties of foam concrete. [Thesis (PhD/Research)]

Laurent, Anthony (2016) Modelling and analysis of multi-junction photovoltaic cells using MATLAB/Simulink for the improvement of conversion efficiency. [USQ Project]

Liu, Shan and Fang, Zhengping and Yan, Hongqiang and Chevali, Venkata S. and Wang, Hao (2016) Synergistic flame retardancy effect of graphene nanosheets and traditional retardants on epoxy resin. Composites Part A: Applied Science and Manufacturing, 89. pp. 26-32. ISSN 1359-835X

Li, Tianning and Wen, Peng (2016) Depth of anaesthesia assessment based on adult electroencephalograph beta frequency band. Australasian Physical & Engineering Sciences in Medicine, 39 (3). pp. 773-781. ISSN 0158-9938

Luo, Yongyue and Qian, Jiangzuo and He, Dongning and Tao, Jinlong and Zhao, Pengfei and Gong, Wei and Zhang, Zuhua and Peng, Zheng and Chen, Xianfei and Wang, Hao and Dan, Yi (2016) Preparation of natural rubber/silica nanocomposites using one- and two-dimensional dispersants by latex blending process. Polymer Composites. ISSN 0272-8397

Long, Derek and McCarthy, Cheryl and Jensen, Troy (2016) Row and water front detection from UAV thermal-infrared imagery for furrow irrigation monitoring. In: 2016 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2016), 12-15 July 2016, Banff, AB, Canada.

Leis, John and Buttsworth, David (2016) A temperature compensation technique for near-infrared methane gas threshold detection. IEEE Transactions on Industrial Electronics, 63 (3). pp. 1813-1821. ISSN 0278-0046

Liu, Yuge and Zhang, Xiumei and He, Dongning and Ma, Feiyue and Fu, Qiong and Hu, Yun (2016) An amperometric glucose biosensor based on a MnO2/graphene composite modified electrode. RSC Advances, 6 (22). 18654-18661 .

Liu, Shan and Fang, Zhengping and Yan, Hongqiang and Wang, Hao (2016) Superior flame retardancy of epoxy resin by the combined addition of graphene nanosheets and DOPO. RSC Advances, 6 (7). pp. 5288-5295.

Li, Wenbin and Xu, Weilin and Wang, Hao and Wang, Xin (2016) A dynamic tester to evaluate the thermal and moisture behaviour of the surface of textiles. Journal of Thermal Biology, 55. pp. 14-19. ISSN 0306-4565

Liu, Yi and Yan, Chunjie and Zhang, Zuhua and Wang, Hongquan and Zhou, Sen and Zhou, Wei (2016) A comparative study on fly ash, geopolymer and faujasite block for Pb removal from aqueous solution. Fuel, 185. pp. 181-189. ISSN 0016-2361

Li, Nannan and Yan, Hongqiang and Xia, Lei and Mao, Lebo and Fang, Zhengping and Song, Yihu and Wang, Hao (2015) Flame retarding and reinforcing modification of ramie/polybenzoxazine composites by surface treatment of ramie fabric. Composites Science and Technology, 121. pp. 82-88. ISSN 0266-3538

Lumsden, Glenn (2015) Industrial wireless network mapping. [USQ Project]

Little, Richard A (2015) Condition monitoring of rotating machinery - vibration analysis. [USQ Project]

Lang, Jason (2015) Energy efficiency improvement in coal fired power plant through operational optimisation. [USQ Project]

Lucas, Ryan (2015) Piecewise adaptive controller design for position control of magnetic levitation system. [USQ Project]

Leis, John and Buttsworth, David (2015) Convergence in synchronous measurements. In: 8th International Conference on Signal Processing and Communication Systems (ICSPCS 2014), 15-17 Dec 2014, Gold Coast, Australia.

Li, Tianning (2015) Depth of anaesthesia assessment based on time and frequency features of simplified electroencephalogram (EEG). [Thesis (PhD/Research)]

Li, Qiang and Hua, Fuan and Li, Jianping and Wang, Hao (2015) Research difference of strain distribution and microstructure evolution between rolling direction and transverse direction of AM50 Mg alloy plate by digital image correlation. Advances in Materials Science and Engineering, 2015. ISSN 1687-8434

Leis, John and Buttsworth, David and Snook, Chris and Holmes, Graham (2014) Detection of potentially explosive methane levels using a solid-state infrared source. IEEE Transactions on Instrumentation and Measurement, 63 (12). pp. 3088-3095. ISSN 0018-9456

Li, L. F. and Cheng, Y. K. and Xu, G. L. and Wang, E. Z. and Zhang, Z. H. and Wang, H. (2014) Effects of indium addition on properties and wettability of Sn–0.7Cu–0.2Ni lead-free solders. Materials and Design, 64. pp. 15-20. ISSN 0264-1275

Liu, Xiaoping and Shi, Jun and Xiang, Wei and Zhang, Qinyu and Zhang, Naitong (2014) Sampling expansion for irregularly sampled signals in fractional Fourier transform domain. Digital Signal Processing, 34. pp. 74-81. ISSN 1051-2004

Long, Hang and Xiang, Wei and Zhang, Xiaoli and Wang, Jing and Wang, Wenbo (2014) Cooperative jamming and power allocation in three-phase two-way relaying system with untrusty relay node. In: 31st URSI General Assembly and Scientific Symposium (URSI GASS 2014), 16-23 Aug 2014, Beijing, China.

Long, Hang and Xiang, Wei and Wang, Jing and Zhang, Yueying and Liu, Yuanan and Wang, Wenbo (2014) Conditional error rate and combining schemes for hybrid automatic repeat request with M-pulse amplitude modulation. International Journal of Communication Systems , 27 (10). pp. 1798-1813. ISSN 1074-5351

Long, H. and Xiang, W. and Zhang, Y. and Wang, J. and Zheng, K. and Wang, W. (2014) Precoding and channel state information sharing in cooperative macro base stations and femto sites. International Journal of Communication Systems, 27 (10). pp. 2030-2047. ISSN 1074-5351

Light, Brenton (2014) Terrestrial laser scanning for building information modelling (BIM) development and application. [USQ Project]

Long, Hang and Xiang, Wei and Wang, Jing and Zhang, Yueying and Wang, Wenbo (2014) Cooperative jamming and power allocation with untrusty two-way relay nodes. IET Communications , 8 (13). pp. 2290-2297. ISSN 1751-8628

Liu, Fei and Zheng, Kan and Xiang, Wei and Zhao, Hui (2014) Design and performance analysis of an energy-efficient uplink carrier aggregation scheme. IEEE Journal on Selected Areas in Communications, 32 (2). pp. 197-207. ISSN 0733-8716

Liu, Shan and Yan, Hongqiang and Fang, Zhengping and Wang, Hao (2014) Effect of graphene nanosheets on morphology, thermal stability and flame retardancy of epoxy resin. Composites Science and Technology, 90. pp. 40-47. ISSN 0266-3538

Low, Jim and Davies, Ian J. and Dong, Yu and Ahmed, Shaikh Faiz Uddin and Wang, Hao and Akil, Hazizan Md (2014) Advanced composites with natural reinforcement [Editorial]. Advances in Materials Science and Engineering, 2014. pp. 1-2. ISSN 1687-8434

Liu, Shan and Yan, Hongqiang and Fang, Zhengping and Guo, Zhenghong and Wang, Hao (2014) Effect of graphene nanosheets and layered double hydroxides on the flame retardancy and thermal degradation of epoxy resin. RSC Advances, 4 (36). pp. 18652-18659.

Leis, John (2013) Simultaneous gain, drift and offset estimation in measurement systems using coherent sampling. In: 7th International Conference on Signal Processing and Communication Systems (ICSPCS 2013), 16-18 Dec 2013, Gold Coast, Australia.

Liu, Hui-min and Li, Zhi-peng and Wang, Hao (2013) Effect of in-situ TiC particles on hot deformation behavior of spray formed 7075 Al alloy. Transactions of Materials and Heat Treatment (Cailiao Rechuli Xuebao), 34 (S2). pp. 173-178. ISSN 1009-6264

Long, Derek (2013) A.R Drone vision-guided searching. [USQ Project]

Lovett, Jy (2013) Engineering design of a disposable water bottle for an Australian market. [USQ Project]

Lanigan, Christopher John (2013) Implementation of a condition monitoring program for high voltage (HV) assets for the Santos GLNG Project. [USQ Project]

Langes, Chris (2013) Investigation of shunt vehicle derailments. [USQ Project]

Long, Hang and Xiang, Wei and Wang, Jing and Zhang, Yueying and Zhao, Hui and Wang, Wenbo (2013) Cooperative jamming and power allocation in two-way relaying system with eavesdropper. In: IEEE 78th Vehicular Technology Conference (VTC 2013 Fall): Connecting the Mobile World, 2-5 Sep 2013, Las Vegas, NV. United States.

Long, Hang and Xiang, Wei and Wang, Jing and Zhang, Yueying and Wang, Wenbo (2013) Cooperative jamming and power allocation in three-phase two-way relaying wiretap systems. In: IEEE Wireless Communications and Networking Conference (WCNC 2013): Connecting the Future, 7-10 Apr 2013, Shanghai, China.

Landers, Richard George (2013) Depth of anesthesia assessment and higher brain function modelling for consciousness. [Thesis (PhD/Research)]

Li, Qiong and Zhao, Mengmeng and Xing, Fei (2013) Experimental investigation of airflow distribution for a novel combustor mode. Applied Mechanics and Materials, 284-287. pp. 743-747. ISSN 1660-9336

M

Mahmood, Raid Ahmed (2018) Experimental and computational investigation of gravity separation in a vertical flash tank separator. [Thesis (PhD/Research)]

Mahbub, Parvez and Leis, John and Macka, Mirek (2018) Chemometric approach to the calibration of light emitting diode based optical gas sensors using high-resolution transmission molecular absorption data. Analytical Chemistry, 90 (10). pp. 5973-5976. ISSN 0003-2700

Maiti, Ananda and Maxwell, Andrew and Kist, Alexander (2018) Comparison of QoS optimisation techniques in adaptive smart device peer-to-peer overlay networks. International Journal of Parallel, Emergent and Distributed Systems. pp. 1-19. ISSN 1744-5760

Misnon, Mohd Iqbal and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Chen, Haizhen and Goda, Koichi and Khan, Md Tawhidul Islam (2018) Flammability characteristics of chemical treated woven hemp fabric. Advances in Materials Science and Engineering, 5 (1). pp. 1-20. ISSN 1687-8434

Maiti, Ananda and Smith, Mark and Maxwell, Andrew D. and Kist, Alexander A. (2018) Augmented reality and natural user interface applications for remote laboratories. In: Cyber-physical laboratories in engineering and science education. Springer International Publishing, Cham, Switzerland, pp. 79-109.

Maiti, Ananda and Zutin, Danilo G. and Wuttke, Heinz-Dietrich and Henke, Karsten and Maxwell, Andrew D. and Kist, Alexander A. (2017) A framework for analyzing and evaluating architectures and control strategies in distributed remote laboratories. IEEE Transactions on Learning Technologies. ISSN 1939-1382

Mai-Duy, N. and Phan-Thien, N. and Tran-Cong, T. (2017) Imposition of physical parameters in dissipative particle dynamics. Computer Physics Communications, 221. pp. 290-298. ISSN 0010-4655

Moragaspitiya, Chathurani and Rajapakse, Jay and Senadeera, Wijitha and Ali, Imtiaj (2017) Simulation of dynamic behaviour of a biological wastewater treatment plant in South East Queensland, Australia using Bio-Win software. Engineering Journal, 21 (3). pp. 1-22. ISSN 0125-8281

Mai-Duy, N. and Phan-Thien, N. and Tran-Cong, T. (2017) An improved dissipative particle dynamics scheme. Applied Mathematical Modelling, 46. pp. 602-617. ISSN 0307-904X

McCarthy, Alison and Shippam, Ralph and Agustina, Lidya (2017) Sense-T: Sensor smart irrigation. Project Report. Sense-T , Australia. [Report]

Mohammed Amean, Zainab (2017) Automatic plant features recognition using stereo vision for crop monitoring. [Thesis (PhD/Research)]

Mai-Duy, N. and Le, T. T. V. and Tien, C. M. T. and Ngo-Cong, D. and Tran-Cong, T. (2017) Compact approximation stencils based on integrated flat radial basis functions. Engineering Analysis with Boundary Elements, 74. pp. 79-87. ISSN 0955-7997

Mirazimiabarghouei, Seyed Javad (2017) Distributed static compensator (DSTATCOM) for voltage support in single wire earth return (SWER) networks. [Thesis (PhD/Research)]

Menezes de Oliveira, Marilia (2017) Human head temperature and electric field investigations under ECT. [Thesis (PhD/Research)]

Maiti, Ananda and Maxwell, Andrew D. and Kist, Alexander A. (2016) Node allocation in peer-to-peer overlay networks based remote instrumentation with smart devices. In: 26th International Telecommunication Networks and Applications Conference (ITNAC 2016), 7-9 Dec 2016, Dunedin, New Zealand.

Maiti, Ananda and Maxwell, Andrew and Wu, Ting and Kist, Alexander A. (2016) Teacher perspectives of constructing remote experiments for collaboration and sharing in STEM education. In: 27th Annual Conference of the Australasian Association for Engineering Education (AAEE 2016): The Changing Role of the Engineering Educator for Developing the Future Engineer, 4-7 Dec 2016, Coffs Harbour, Australia.

Matveev, M. Y. and Schubel, P. J. and Long, A. C. and Jones, I. A. (2016) Understanding the buckling behaviour of steered tows in automated dry fibre placement (ADFP). Composites Part A: Applied Science and Manufacturing, 90. pp. 451-456. ISSN 1359-835X

Molloy, Aron (2016) Improving project delivery: through the application of project management techniques. [USQ Project]

Martin, Gabriel (2016) Design of an optical access engine and pneumatic head clamp. [USQ Project]

Mason, Alex (2016) Improved transfer chute design using DEM software to predict material flow behaviour. [USQ Project]

Monz, Bernard (2016) Robot Cat – a free-fall analyses. [USQ Project]

Mosetter, Steven (2016) Using UAVs and machine vision in the early detection of combine harvester fires. [USQ Project]

Marland, Michael and Helwig, Andreas (2016) Possibilities for minimising sulphur hexafluoride use for HV switchgear asset renewal: an Australian case study. In: 26th Australasian Universities Power Engineering Conference (AUPEC 2016), 25-28 Sept 2016, Brisbane, Australia.

Masouleh, Farzaneh Fadakar and Das, Narottam and Rozati, Seyed Mohammad (2016) Nano-structured gratings for improved light absorption efficiency in solar cells. Energies, 9 (9). pp. 1-14. ISSN 1996-1073

Menezes de Oliveira, Marilia and Wen, Peng and Ahfock, Tony (2016) Heat transfer due to electroconvulsive therapy: influence of anisotropic thermal and electrical skull conductivity. Computer Methods and Programs in Biomedicine, 133. pp. 71-81. ISSN 0169-2607

Misnon, Mohd Iqbal and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Chen, Haizhen and Wang, Hao (2016) Woven hemp fabric reinforced vinyl ester composite treated with fire retardant. International Journal of Advances in Science Engineering and Technology, 4 (3). pp. 90-95. ISSN 2321-8991

Misnon, Mohd Iqbal and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Wang, Hao and Lau, Kin-tak (2016) Woven hemp fabric reinforced vinyl ester composite: effect of water absorption on the mechanical properties degradation. International Journal of Advances in Science, Engineering and Technology, 4 (3). pp. 96-101. ISSN 2321-8991

Maiti, Ananda and Kist, Alexander and Smith, Mark (2016) Key aspects of integrating augmented reality tools into peer-to-peer remote laboratory user interfaces. In: 13th International Conference on Remote Engineering and Virtual Instrumentation (REV 2016), 24-26 Feb 2016, Madrid, Spain.

Maiti, Ananda and Kist, Alexander A. and Maxwell, Andrew D. (2016) Variable interactivity with dynamic control strategies in remote laboratory experiments. In: 13th International Conference on Remote Engineering and Virtual Instrumentation (REV 2016), 24-26 Feb 2016, Madrid, Spain.

Moore, Peter and Kist, Alexander A and Maiti, Ananda and Maxwell, Andrew D. (2016) Work in progress: remote experiment control through gesture recognition. In: 13th International Conference on Remote Engineering and Virtual Instrumentation (REV 2016), 24-26 Feb 2016, Madrid, Spain.

Misnon, Mohd Iqbal (2016) Development of hemp fabric reinforced composites. [Thesis (PhD/Research)]

Maiti, Ananda (2016) Enabling peer-to-peer remote experimentation in distributed online remote laboratories. [Thesis (PhD/Research)]

Mirazimiabarghouei, Seyed Javad and Ahfock, Tony and Helwig, Andreas (2016) Placement of Distribution STATic COMpensator (DSTATCOM) as voltage support equipment in Single Wire Earth Return (SWER) system. In: 6th IEEE International Conference on Power and Energy (PECon 2016): Empowering Technologies for Future Energy Sustainability, 28-29 Nov 2016, Melaka, Malaysia.

Mirazimiabarghouei, Seyed Javad and Ahfock, Tony and Helwig, Andreas (2016) Single Wire Earth Return (SWER) system voltage support using four quadrant DSTATCOM. In: 6th IEEE International Conference on Power and Energy (PECon 2016): Empowering Technologies for Future Energy Sustainability, 28-29 Nov 2016, Melaka, Malaysia.

Ma, Xue and Zhang, Zuhua and Wang, Aiguo (2016) The transition of fly ash-based geopolymer gels into ordered structures and the effect on the compressive strength. Construction and Building Materials, 104. pp. 25-33. ISSN 0950-0618

Malpress, Ray (2016) Variable length connecting rod. .

Maiti, Ananda and Kist, Alexander A. and Maxwell, Andrew D. and Orwin, Lindy (2015) STEM oriented remote access laboratories with distributed peer-to-peer architecture. In: Online experimentation: emerging technologies and IoT. International Frequency Sensor Association Publishing, Spain, pp. 295-314. ISBN 978-84-608-6128-7

Maiti, Ananda and Kist, Alexander A. and Maxwell, Andrew D. (2015) Building Markov Decision Process based models of remote experimental setups for state evaluation. In: 2015 IEEE Symposium Series on Computational Intelligence (SSCI), 7-10 Dec 2015, Cape Town, South Africa.

McQuade, Samuel R (2015) Recyclable disposable helmet design. [USQ Project]

Ma, Xue and Li, Liangfeng and Zhang, Zuhua and Wang, Hao and Wang, Enze and Qiu, Tai (2015) Effects of rare earth La on microstructure and properties of Ag-21Cu-25Sn alloy ribbon prepared by melt spinning. Materials and Design, 83. pp. 1-5. ISSN 0264-1275

Murphy, Ryan (2015) Dynamic conductor ratings: annealing properties of homogenous conductors across varying climatic conditions. [USQ Project]

Mansell, Chloe (2015) Optimisation of multicore processor and GPU for use in embedded systems. [USQ Project]

Marsh, Scott (2015) Remote identification of overhead conductor materials. [USQ Project]

Mohammed, Rafiqul Islam (2015) Finite element analysis of fillet welded joint. [USQ Project]

Maiti, Ananda and Kist, Alexander A. and Maxwell, Andrew (2015) Latency-adaptive Positioning of Nano Data Centers for peer-to-peer communication based on clustering. In: 3rd Workshop on Cloud Computing Systems, Networks, and Applications (CCSNA 2015) in conjunction with IEEE International Conference on Communications (IEEE ICC 2015): Smart City & Smart World, 8-12 June 2015, London, UK.

Maiti, Ananda and Kist, Alexander A. and Maxwell, Andrew D. (2015) Components relationship analysis in distributed remote laboratory apparatus with data clustering. In: 2015 IEEE 24th International Symposium on Industrial Electronics (ISIE), 3-5 June 2015, Rio de Janeiro, Brazil.

Maiti, Ananda and Maxwell, Andrew D. and Kist, Alexander A. and Orwin, Lindy (2015) Joining the game and the experiment in peer-to-peer remote laboratories for STEM education. In: 3rd Experiment@International Conference 2015: Online Experimentation (exp.at'15), 0-04 June 2015, Ponta Delgada, Portugal.

Masouleh, Farzaneh Fadakar and Das, Narottam and Rozati, Seyed Mohammad (2015) Optimal subwavelength design for efficient light trapping in central slit of plasmonics-based metal-semiconductor-metal photodetector. Optical and Quantum Electronics, 47 (6). pp. 1477-1485. ISSN 0306-8919

Maiti, Ananda and Kist, Alexander A. and Maxwell, Andrew D. (2015) Real-time remote access laboratory with distributed and modular design. IEEE Transactions on Industrial Electronics, 62 (6). pp. 3607-3618. ISSN 0278-0046

Mai-Duy, N. and Phan-Thien, N. and Khoo, B. C. (2015) Investigation of particles size effects in Dissipative Particle Dynamics (DPD) modelling of colloidal suspensions. Computer Physics Communications, 189. pp. 37-46. ISSN 0010-4655

Maiti, Ananda and Kist, Alexander A. and Maxwell, Andrew D. (2015) Time scheduling in a peer-to-peer remote access laboratory for STEM education. In: 3rd IEEE International Conference on Teaching, Assessment and Learning for Engineering (TALE 2014): Learning for the Future Now, 8-10 Dec 2014, Wellington, New Zealand.

Misnon, M. I. and Islam, M. M. and Epaarachchi, J. A. and Lau, K. T. (2015) Analyses of woven hemp fabric characteristics for composite reinforcement. Materials and Design, 66 (A). pp. 82-92. ISSN 0264-1275

Mudford, Neil R. and O'Byrne, Sean and Neely, Andrew and Buttsworth, David and Balage, Sudantha (2015) Hypersonic wind-tunnel free-flying experiments with onboard instrumentation. Journal of Spacecraft and Rockets, 52 (1). pp. 231-242. ISSN 0022-4650

Misnon, Mohd Iqbal and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Lau, Kin-tak (2014) Selection of hemp fabric as reinforcement in composite materials. In: 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014), 26-27 Dec 2014, Khulna, Bangladesh.

Marland, Michael (2014) Alternatives to SF6 in HV circuit breaker insulation. [USQ Project]

Moorhouse, David (2014) Hyper-spectral imaging for airborne meteorite detection. [USQ Project]

Manthey, Byron (2014) Pre–treatment of coal seam gas produced water. [USQ Project]

Mayne, Caleb (2014) Reliability-centered maintenance analysis of a Rio Tinto iron ore locomotive engine. [USQ Project]

McLaughlin, David (2014) Resonator probe for photoacoustic measurement. [USQ Project]

McDowell, Nigel A. J. (2014) Teleprotection signalling over an IP/MPLS network. [USQ Project]

McCarthy, Alison (2014) Effect of spatial variability on data requirements for site-specific irrigation. In: 17th Australian Cotton Conference (ACC 2014): Our Fibre, Our Focus, Our Future, 5-7 Aug 2014, Gold Coast, Australia.

McCarthy, Alison and Tscharke, Matthew (2014) Automated camera-based height and flower detection for wheat and chickpea. In: 5th International Workshop on Applications of Computer Image Analysis and Spectroscopy in Agriculture (ASABE 2014), 12-13 Jul 2014, Montreal, Canada.

Misnon, Mohd Iqbal and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Lau, Kin-tak (2014) Potentiality of utilising natural textile materials for engineering composites applications. Materials and Design, 59. pp. 359-368. ISSN 0264-1275

Menezes de Oliveira, Marilia and Wen, Peng and Ahfock, Tony and Shahid, Syed Salman (2014) A preliminary study about the distribution of temperature due to electrical stimulation in ECT. In: 2014 ICME International Conference on Complex Medical Engineering (ICME 2014), 26-29 Jun 2014, Taipei, Taiwan.

McCarthy, Alison and Smith, Rod and Gillies, Malcolm (2014) Autonomous site-specific irrigation control: the current state and a vision of a future system [Keynote]. In: 2nd Digital Rural Futures Conference 2014, 25-27 Jun 2014, Toowoomba, Australia.

Maiti, Ananda and Maxwell, Andrew D. and Kist, Alexander A. and Orwin, Lindy (2014) Integrating enquiry-based learning pedagogies and remote access laboratory for STEM education. In: 4th IEEE Global Engineering Education Conference: Engineering Education Towards Openness and Sustainability (EDUCON 2014), 3-5 Apr 2014, Istanbul, Turkey.

Mai-Duy, N. and Thai-Quang, N. and Hoang-Trieu, T.-T. and Tran-Cong, T. (2014) A compact 9 point stencil based on integrated RBFs for the convection-diffusion equation. Applied Mathematical Modelling, 38 (4). pp. 1495-1510. ISSN 0307-904X

Mat Yasin, M. H. and Yusaf, Talal and Mamat, R. and Yusop, A. Fitri (2014) Characterization of a diesel engine operating with a small proportion of methanol as a fuel additive in biodiesel blend. Applied Energy, 114. pp. 865-873. ISSN 0306-2619

Maiti, Ananda and Maxwell, Andrew D. and Kist, Alexander A. (2014) Features, trends and characteristics of remote access laboratory management systems. International Journal of Online Engineering, 10 (2). 30­-37. ISSN 1868-1646

Maiti, Ananda and Kist, Alexander A. and Maxwell, Andrew D. (2014) Using network enabled microcontrollers in experiments for a distributed remote laboratory. In: 11th International Conference on Remote Engineering and Virtual Instrumentation (REV 2014), 26-28 Feb 2014, Porto, Portugal.

McIntyre, Timothy and Khan, Razmi and Eichmann, Troy and Upcroft, Ben and Buttsworth, David (2014) Visible and near infrared spectroscopy of Hayabusa Reentry using semi-autonomous tracking. Journal of Spacecraft and Rockets, 51 (1). pp. 31-38. ISSN 0022-4650

Maxwell, Andrew D. and Orwin, Lindy and Kist, Alexander A. and Maiti, Ananda and Midgley, Warren and Ting, Wu (2013) An inverted remote laboratory - makers and gamers. In: 24th Annual Conference of the Australasian Association for Engineering Education (AaeE 2013): Work Integrated Learning - Applying Theory to Practice in Engineering Education, 8-11 Dec 2013, Gold Coast, Queensland.

Mohammed Amean, Z. and Low, T. and McCarthy, C. and Hancock, N. (2013) Automatic plant branch segmentation and classification using vesselness measure. In: Australasian Conference on Robotics and Automation (ACRA 2013), 2-4 Dec 2013, Sydney, Australia.

Maiti, Ananda and Kist, Alexander A. and Maxwell, Andrew D. (2013) Estimation of round trip time in distributed real time system architectures. In: Australasian Telecommunication Networks and Applications Conference (ATNAC 2013), 20-22 Nov 2013, Christchurch, New Zealand.

McInally, Stuart Anthony (2013) Cost effective galvanising in remote areas. [USQ Project]

Martin, Nathanael John (2013) Domestic lawn mower blade noise and influence of machine geometry. [USQ Project]

Manthey, Nathan W. and Cardona, Francisco and Francucci, Gaston and Aravinthan, Thiru (2013) Thermo-mechanical properties of epoxidized hemp oil-based bioresins and biocomposites. Journal of Reinforced Plastics and Composites , 32 (19). pp. 1444-1456. ISSN 0731-6844

Mohammed Amean, Z. and Low, T. and McCarthy, C. and Hancock, N. (2013) Evaluation of stereovision for extracting plant features. In: SEAg 2013: Innovative Agricultural Technologies for a Sustainable Future, 22-25 Sept 2013, Barton, Western Australia.

Mai-Duy, N. and Phan-Thien, N. and Khoo, B. C. and Tran-Cong, T. (2013) Modelling of solid bodies in dissipative particle dynamics. In: 3rd International Conference on Particle-based Methods Fundamentals and Applications (Particles 2013): Particle-Based Methods III: Fundamentals and Applications , 18-20 Sep 2013, Stuttgart, Germany.

Misnon, M. I. and Islam, M. M. and Epaarachchi, J. and Lau, K. T. (2013) Textile material forms for reinforcement materials: a review. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Misnon, M. I. and Bahari, S. A. and Islam, M. M. and Epaarachchi, J. A. (2013) Integration of textile fabric and coconut shell in particleboard. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Maiti, Ananda and Maxwell, Andrew D. and Kist, Alexander A. (2013) An overview of system architectures for remote laboratories. In: 2nd IEEE International Conference on Teaching, Assessment and Learning for Engineering (TALE 2013), 26-29 Aug 2013, Kuta, Indonesia.

Mai-Duy, N. and Phan-Thien, N. and Khoo, B. C. (2013) A numerical study of strongly overdamped dissipative particle dynamics (DPD) systems. Journal of Computational Physics , 245. pp. 150-159. ISSN 0021-9991

Mossad, Ruth and Aral, Hal (2013) Numerical prediction of the performance of horizontal sand filters as the pitch of the spiral protrusion changes. Water Science and Technology, 67 (10). pp. 2249-2256. ISSN 0273-1223

N

Ngo-Cong, D. and Tien, C.M.T. and Nguyen-Ky, T. and An-Vo, D.-A. and Mai-Duy, N. and Strunin, D. V. and Tran-Cong, T. (2017) A generalised finite difference scheme based on compact integrated radial basis function for flow in heterogeneous soils. International Journal for Numerical Methods in Fluids, 85 (7). pp. 404-429. ISSN 0271-2091

Nguyen, Tuan-Khoa and Dinh, Toan and Phan, Hoang-Phuong and Tran, Canh-Dung and Foisal, Abu Riduan Md. and Dao, Dzung Viet (2017) Electrically stable carbon nanotube yarn under tensile strain. IEEE Electron Device Letters, 38 (9). pp. 1331-1334. ISSN 0741-3106

Nguyen, Anh V. and An-Vo, Duc-Anh and Tran-Cong, Thanh and Evans, Geoffrey M. (2016) A review of stochastic description of the turbulence effect on bubble-particle interactions in flotation. International Journal of Mineral Processing, 156. pp. 75-86. ISSN 0301-7516

Notley, Lindsay (2016) Identification of cement manufacturing raw materials using machine vision. [USQ Project]

Nicholson, Phillip (2016) Power quality improvement using a STATCOM inverter. [USQ Project]

Najafi, G. and Ghobadian, B. and Moosavian, A. and Yusaf, T. and Mamat, R. and Kettner, M. and Azmi, W. H. (2016) SVM and ANFIS for prediction of performance and exhaust emissions of a SI engine with gasoline-ethanol blended fuels. Applied Thermal Engineering, 95. pp. 186-203. ISSN 1359-4311

Nguyen, Hung Quoc (2016) Multiscale stochastic simulation of transient complex flows. [Thesis (PhD/Research)]

Najafi, Gholamhassan and Ghobadian, Barat and Yusaf, Talal and Ardebili, Seyed Mohammad Safieddin and Mamat, Rizalman (2015) Optimization of performance and exhaust emission parameters of a SI (spark ignition) engine with gasoline-ethanol blended fuels using response surface methodology. Energy, 90 (2). pp. 1815-1829. ISSN 0360-5442

Neves, Diego Pereira and Mehdizadeh, Saman Abdanan and Tscharke, Matthew and Naas, Irenilza de Alencar and Banhazi, Thomas Michael (2015) Detection of flock movement and behaviour of broiler chickens at different feeders using image analysis. Information Processing in Agriculture 2, 2 (3-4). pp. 177-182. ISSN 2214-3173

Ngo-Cong, D. and Tran, C.-D. and Mai-Duy, N. and Tran-Cong, T. (2015) Incompressible smoothed particle hydrodynamics-moving IRBFN method for viscous flow problems. Engineering Analysis with Boundary Elements, 59. pp. 172-186. ISSN 0955-7997

Najafi, G. and Ghobadian, B. and Mamat, R. and Yusaf, T. and Azmi, W. H. (2015) Solar energy in Iran: current state and outlook. Renewable and Sustainable Energy Reviews, 49. pp. 931-942. ISSN 1364-0321

Ngo-Cong, D. and Mohammed, F. J. and Strunin, D. V. and Skvortsov, A. T. and Mai-Duy, N. and Tran-Cong, T. (2015) Higher-order approximation of contaminant transport equation for turbulent channel flows based on centre manifolds and its numerical solution. Journal of Hydrology, 525. pp. 87-101. ISSN 0022-1694

Nguyen, H. Q. and Tran, C.-D. and Tran-Cong, T. (2015) Simulation of flow of fibre suspensions using an IRBF-BCF based multiscale approach. In: 11th International Conference on Computational Fluid Dynamics in the Minerals and Process Industries (CFD2015), 07-09 Dec 2015, Melbourne Convention and Exhibition Centre, Melbourne, Australia.

Nguyen, H. Q. and Tran, C.-D. and Tran-Cong, T. (2015) A multiscale method based on the fibre configuration field, IRBF and DAVSS for the simulation of fibre suspension flows. CMES: Computer Modeling in Engineering and Science, 109 (4). pp. 361-403. ISSN 1526-1492

Noor, Muhamad Mat (2015) Experimental and numerical study of MILD combustion in an open-end furnace with exhaust gas recirculation using methane and biogas. [Thesis (PhD/Research)]

Nguyen-Van, H. and Nguyen-Hoai, N. and Chau-Dinh, T. and Tran-Cong, T. (2015) Large deflection analysis of plates and cylindrical shells by an efficient four-node flat element with mesh distortions. Acta Mechanica, 226 (8). pp. 2693-2713. ISSN 0001-5970

Nguyen, H. Q. and Tran, C.-D. and Tran-Cong, T. (2015) RBFN stochastic coarse-grained simulation method: Part I - Dilute polymer solutions using bead-spring chain models. CMES: Computer Modeling in Engineering and Sciences, 105 (5). pp. 399-439. ISSN 1526-1492

Nguyen-Ky, Tai and Wen, Peng and Li, Yan (2014) Monitoring the depth of anaesthesia using Hurst exponent and Bayesian methods. IET Signal Processing, 8 (9). pp. 907-917. ISSN 1751-9675

Napier, Luke W. P. (2014) Develop process bus architecture for integrating sampled value IEDs. [USQ Project]

Nguyen, Liem (2014) Investigation in failure analysis and materials selection in total hip replacement prosthesis. [USQ Project]

Nagel, Gregory (2014) System dependant IDMT settings: direct buried underground cable. [USQ Project]

Nguyen, H. Q. and Tran, C.-D. and Pham-Sy, N. and Tran-Cong, T. (2014) A numerical solution based on the Fokker-Planck equation for dilute polymer solutions using high order RBF methods. Applied Mechanics and Materials, 553. pp. 187-192. ISSN 1662-7482

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2014) Air fuel ratio study for mixture of biogas and hydrogen on mild combustion. International Journal of Automotive and Mechanical Engineering, 10 (1). pp. 2144-2154. ISSN 2229-8649

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2014) Effect of air-fuel ratio on temperature distribution and pollutants for biogas MILD combustion. International Journal of Automotive and Mechanical Engineering, 10 (1). pp. 1980-1992. ISSN 2229-8649

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2014) The simulation of biogas combustion in a MILD burner. Journal of Mechanical Engineering and Sciences, 6 (1). pp. 995-1013. ISSN 2289-4659

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2014) MILD combustion: the future for lean and clean combustion technology. International Review of Mechanical Engineering , 8 (1). pp. 251-257. ISSN 1970-8734

Nguyen, T. and Ghabraie, K. and Tran-Cong, T. (2014) Applying bi-directional evolutionary structural optimisation method for tunnel reinforcement design considering nonlinear material behaviour. Computers and Geotechnics , 55. pp. 57-66. ISSN 0266-352X

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2013) Design and development of mild combustion burner. Journal of Mechanical Engineering and Sciences, 5. pp. 662-676. ISSN 2289-4659

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2013) Numerical study of oxygen dilution and temperature distribution of biogas combustion in Bluff-body MILD burner. In: 7th Australian Combustion Symposium (ACS 2013), 6-8 Nov 2013, Perth, Australia .

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2013) Discretization of three dimensional non-uniform grid: conditional moment closure elliptic equation using finite difference method. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2013) The air fuel ratio study for the mixture of biogas and hydrogen on mild combustion. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Nawi, N. M. and Chen, G. and Jensen, T. (2013) Visible and shortwave near infrared spectroscopy to predict sugarcane quality from clear and raw juice samples. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2013) Analysis of recirculation zone and ignition position of non-premixed bluff-body for biogas mild combustion. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1176-1186. ISSN 2229-8649

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2013) Detail guide for CFD on the simulation of biogas combustion in bluff-body mild burner. In: 2nd International Conference of Mechanical Engineering Research (ICMER 2013): Green Technology for Sustainable Environment, 1-3 Jul 2013, Pahang, Malaysia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2013) The analysis of recirculation zone and ignition position of non-premixed bluff-body for biogas mild combustion. In: 2nd International Conference of Mechanical Engineering Research (ICMER 2013): Green Technology for Sustainable Environment, 1-3 Jul 2013, Pahang, Malaysia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2013) The development of MILD combustion open burner experimental setup. In: 2nd International Conference of Mechanical Engineering Research (ICMER 2013): Green Technology for Sustainable Environment, 1-3 Jul 2013, Pahang, Malaysia.

O

Oun, A. and Yousif, B. F. (2016) Two-body abrasion of bamboo fibre/epoxy composites. In: Ecotribology, research developments. Materials Forming, Machining and Tribology. Springer, Switzerland, pp. 145-172. ISBN 978-3-319-24005-3

Ong, Hwai Chyuan and Masjuki, H. H. and Mahlia, T. M. I. and Silitonga, A. S. and Chong, W. T. and Yusaf, Talal (2014) Engine performance and emissions using Jatropha curcas, Ceiba pentandra and Calophyllum inophyllum biodiesel in a CI diesel engine. Energy, 69. pp. 427-445. ISSN 0360-5442

Orange, Lachlan (2013) Projectile impacts on hardened alloy steel plate. [USQ Project]

P

Phan, Hoa Thanh and Dinh, Thien Xuan and Bui, Phong Nhu and Tran, Canh-Dung and Bui, Tung Thanh and Dau, Van Thanh (2018) Robust angular rate sensor based on corona discharge ion wind. In: 13th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS 2018) , 22-26 April 2018, Singapore.

Phan, Hoa Thanh and Dinh, Thien Xuan and Bui , Phong Nhu and Tran, Canh-Dung and Bui, Tung Thanh and Dang, Lam Bao and Dau, Van Thanh (2018) Study on miniaturized tri-axis heat convection accelerometer with experimental validation. In: 13th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS 2018), 22-26 April 2018, Singapore.

Phan-Thien, Nhan and Mai-Duy, Nam (2017) Understanding viscoelasticity: an introduction to rheology, 3rd ed. Graduate Texts in Physics. Springer, Cham, Switzerland. ISBN 978-3-319-61999-6

Polwaththe-Gallage, Hasitha-Nayanajith and Saha, Suvash C. and Sauret, Emily and Flower, Robert and Senadeera, Wijitha and Gu, YuanTong (2016) SPH-DEM approach to numerically simulate the deformation of three‑dimensional RBCs in non‑uniform capillaries. BioMedical Engineering OnLine, 15 (Suppl 2:161). pp. 349-370.

Patel, Jayesh (2016) Analysis of the potential for 100% renewable energy supply to Groote Eylandt. [USQ Project]

Price, Timothy (2016) Synchronization of multiple DVB-T USB receivers for use in common radio astronomy applications. [USQ Project]

Phan-Thien, N. and Mai-Duy, N. and Khoo, B. C. and Duong-Hong, D. (2016) Strongly overdamped dissipative particle dynamics for fluid-solid systems. Applied Mathematical Modelling, 40 (13-14). pp. 6359-6375. ISSN 0307-904X

Pike, Samuel (2015) Investigation into the delamination of composite laminates on aircraft rudders due to fluid ingress and icing. [USQ Project]

Pham-Sy, Nam (2015) Parallel computations based on domain decompositions and integrated radial basis functions for fluid flow problems. [Thesis (PhD/Research)]

Palendeng, Mario Elvis (2015) Real time depth of anaesthesia monitoring through electroencephalogram (EEG) signal analysis based on Bayesian method and analytical technique. [Thesis (PhD/Research)]

Pichlis, Matt V. (2014) Development of advanced turbulent combustion models. [USQ Project]

Pratt, Andrew (2014) Prevention of electrical accidents with safe personal protective bonding and earthing. [USQ Project]

Phan-Thien, N. and Mai-Duy, N. and Khoo, B. C. (2014) A spring model for suspended particles in dissipative particle dynamics. Journal of Rheology, 58 (4). pp. 839-867. ISSN 0148-6055

Phan-Thien, N. and Mai-Duy, N. and Pan, D. and Khoo, B.C. (2014) Exponential-time differencing schemes for low-mass DPD systems. Computer Physics Communications, 185 (1). pp. 229-235. ISSN 0010-4655

Preston, Vivian and Goh, Steven (2013) Engineering graduate program: how it affects the skills, attributes and career development of graduate engineers. In: 24th Annual Conference of the Australasian Association for Engineering Education (AAEE 2013): Work Integrated Learning - Applying Theory to Practice in Engineering Education, 8-11 Dec 2013, Gold Coast, Australia.

Peckett, Damian (2013) Adaptive Markov decision control of high-frequency drip irrigation systems. [USQ Project]

Patel, Kunal J. (2013) Effects of transformer inrush current. [USQ Project]

Petersen, S. (2013) Numerical modelling of minor waterway barriers for fish passage in the Mary River catchment. [USQ Project]

Pestano, Julius Rino (2013) Reducing road fatalities – vehicular ad hoc network. [USQ Project]

Pasanduka, Timothy (2013) Systematic procedure to determine line current differential relay settings with back up distance for a 500 kV ac three phase line. [USQ Project]

Peauril, J. and Epaarachchi, J. and Lau, K. T. and Wang, H. (2013) Embedded fibre optic sensors under multi-axial loading: a pilot study. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Peng, Mugen and Wang, Cheng-Xiang and Gao, Feifei and Xiang, Wei (2013) Advanced antenna technologies in the beyond IMT-advanced systems [Editorial]. International Journal of Antennas and Propagation, 2013. ISSN 1687-5869

Q

Qiu, Haoran and Peng, Yuelian and Ge, Lei and Villacorta Hernandez, Byron and Zhu, Zhonghua (2018) Enhanced anti-fouling property in membrane distillation by pore channel surface modification. Applied Surface Science, 443. pp. 217-226. ISSN 0169-4332

Qian, Mengbo and Sun, Yiqi and Xu, Xiaodong and Liu, Lina and Song, Pingan and Yu, Youming and Wang, Hao and Qian, Jun (2017) 2D-alumina platelets enhance mechanical and abrasion properties of PA-612 via interfacial hydrogen-bond interactions. Chemical Engineering Journal, 308. pp. 760-771.

Qadir, Qahhar Muhammad and Kist, Alexander A. and Zhang, Zhongwei (2016) A quality of experience-aware cross-layer architecture for optimizing video streaming services. Computer Networks, 102. pp. 38-49. ISSN 1389-1286

Qadir, Qahhar Muhammad and Kist, Alexander A. and Zhang, Zhongwei (2016) The probability relationship between video’s instantaneous and average aggregate rates. Multimedia Tools and Applications, 75 (12). pp. 6909-6924. ISSN 1380-7501

Qadir, Qahhar Muhammad (2016) Cross-layer optimisation of quality of experience for video traffic. [Thesis (PhD/Research)]

Quinton, Matthew (2015) Controller Area Network to Modbus network bridge to interface gas detection units with Building Management Systems. [USQ Project]

Qadir, Qahhar Muhammad and Kist, Alexander A. and Zhang, Zhongwei (2015) A novel traffic rate measurement algorithm for quality of experience-aware video admission control. IEEE Transactions on Multimedia, 17 (5). pp. 711-722. ISSN 1520-9210

Qadir, Qahhar Muhammad and Kist, Alexander A. and Zhang, Zhongwei (2015) Mechanisms for QoE optimisation of video traffic: a review paper. Australasian Journal of Information, Communication Technology and Applications, 1 (1). pp. 1-18. ISSN 2204-8308

Qadir, Qahhar Muhammad and Kist, Alexander A. and Zhang, Zhongwei (2015) Optimization of quality of experience for video traffic. In: 22nd International Conference on Telecommunications (ICT2015), 27–29 April 2015, Sydney, Australia.

Qadir, Safeen and Kist, Alexander A. and Zhang, Zhongwei (2014) QoE-aware cross-layer architecture for video traffic over internet. In: 2014 IEEE Region 10 International Conference (TENCON 2014), 14-16 Apr 2014, Kuala Lumpur, Malaysia.

Qadir, Safeen and Kist, Alexander A. (2013) Video-aware measurement-based admission control. In: Australasian Telecommunication Networks and Applications Conference (ATNAC 2013), 20-22 Nov 2013, Christchurch, New Zealand.

Qi, Haixia and Zhou, Hong and Low, Tobias and Mehdizadeh, S. and Tscharke, M. and Banhazi, T. (2013) A hybrid WSN system for environment monitoring at poultry buildings. In: SEAg 2013: Innovative Agricultural Technologies for a Sustainable Future, 22-24 Sept 2013, Barton, Western Australia.

R

Rathnayaka, C. M. and Karunasena, H. C. P. and Senadeera, W. and Polwaththe-Gallage, H. N. and Gu, Y. T. (2019) A 3-D coupled Smoothed Particle Hydrodynamics and Coarse-Grained model to simulate drying mechanisms of small cell aggregates A 3-D coupled Smoothed Particle Hydrodynamics and Coarse-Grained model to simulate drying mechanisms of small cell aggregates. Applied Mathematical Modelling, 67. pp. 219-233. ISSN 0307-904X

Rathnayaka, C. M. and Karunasena, H. C. P. and Senadeera, W. and Guan, L. and Gu, Y. T. (2018) Three-dimensional (3D) numerical modeling of morphogenesis in dehydrated fruits and vegetables. In: Advances in agricultural machinery and technologies. Taylor & Francis (CRC Press), Boca Raton, United States, pp. 431-454. ISBN 978-1-4987-5412-5

Rathnayaka, C. M. and Karunasena, H. C. P. and Senadeera, W. and Gu, Y. T. (2018) Application of a coupled smoothed particle hydrodynamics(SPH) and coarse-grained (CG) numerical modelling approach to study three-dimensional (3-D) deformations of single cells of different food-plant materials during drying [ArticleFirst]. Soft Matter. pp. 1-17. ISSN 1744-683X

Rathnayaka, C. M. and Karunasena, H. C. P. and Senadeera, W. and Gu, Y. T. (2017) Application of 3D imaging and analysis techniques for the study of food plant cellular deformations during drying. Drying Technology. pp. 1-14. ISSN 0737-3937

Ren, Daming and Yan, Chunjie and Duan, Ping and Zhang, Zuhua and Li, Lingyao and Yan, Zhongyun (2017) Durability performances of wollastonite, tremolite and basalt fiber-reinforced metakaolin geopolymer composites under sulfate and chloride attack. Construction and Building Materials, 134. pp. 56-66. ISSN 0950-0618

Rathnayaka Mudiyanselage, C. M. and Karunasena, H. C. P. and Gu, Y. T. and Guan, L. and Senadeera, W. (2017) Novel trends in numerical modelling of plant food tissues and their morphological changes during drying - a review. Journal of Food Engineering, 194. pp. 24-39. ISSN 0260-8774

Rahimi, Hadi (2017) Investigation of radial flow ejector performance through experiments and computational simulations. [Thesis (PhD/Research)]

Rathnayaka, C. M. and Wijerathne, W. D. C. C. and Karunasena, H. C. P. and Senadeera, W. and Gu, Y. T. (2017) Microscale and multiscale computational modelling of morphological changes in plant cellular structure during drying with a coupled smoothed particle hydrodynamics and coarse-grained appraoch. In: Advances in computational engineering science (ACES). ScienTech Publisher, United States, pp. 1-10.

Rendle-Short, Kendric (2016) Alternator interrupting circuit for improving fuel economy. [USQ Project]

Reeson, Andrew (2016) Improvement of production of double disc planters. [USQ Project]

Rosendale, Shaun (2016) Investigation of low voltage regulation opportunities on the distribution network. [USQ Project]

Ryan, M. J. (2016) Low cost passive radar through software defined radio. [USQ Project]

Rathnayaka Mudiyanselage, C. M. and Karunasena, H. C. P. and Gu, Y. T. and Guan, L. and Banks, J. and Senadeera, W. (2016) A meshfree three-dimensional (3-D) numerical model to study transport phenomena in single plant cells during drying. In: 10th Australasian Heat and Mass Transfer Conference (AHMT 2016), 14-15 July 2016, Brisbane, Australia.

Rathnayaka Mudiyanselage, C. M. and Karunasena, H. C. P. and Gu, Y. T. and Guan, L. and Banks, J. and Senadeera, W. (2016) A 3-D meshfree numerical model to analyze cellular scale shrinkage of different categories of fruits and vegetables during drying. In: 7th International Conference on Computational Methods (ICCM 2016) , 1-4 Aug 2016, Berkeley, California.

Richardson, Mark (2015) Automatic splint to prevent self-harm in autistic and brain injured people. [USQ Project]

Richardson, Kieran (2015) System design of a hydrogen induction system as a retrofit item compatible with existing internal combustion engines. [USQ Project]

Robe, Matthew (2014) MiniROV. [USQ Project]

Rashmi, W. and Ismail, A. F. and Khalid, M. and Anuar, A. and Yusaf, T. (2014) Investigating corrosion effects and heat transfer enhancement in smaller size radiators using CNT-nanofluids. Journal of Materials Science, 49 (13). pp. 4544-4551. ISSN 0022-2461

Rogers, S. (2013) Conjugate heat transfer analysis evaluation of a water cooled component for use in an electric arc furnace. [USQ Project]

Roberts-Apps, Adam (2013) Development of a coal wagon monitoring and control system. [USQ Project]

S

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Khan, Md Tawhidul Islam (2018) Effects of water absorption on mechanical properties of glass microballoons/vinyl ester syntactic foams. Research and Reviews in Materials Science and Chemistry, 8 (1). pp. 59-119.

Sharifian, Ahmad and Hashempour, Javad (2018) Wind tunnel experiments on effects of woven wire screens and buffer zones in mitigating risks associated with firebrand showers. Australian Journal of Mechanical Engineering. ISSN 1448-4846

Shams Bidhendi, Saba (2018) Development of a multi-objective methodology to select lean initiatives and weighted leanness measurement methodology in modular manufacturing companies. [Thesis (PhD/Research)]

Shar, Bruce and Leis, John and Coucher, John (2018) Infrared needle mapping to assist biopsy procedures and training. Healthcare Technology Letters, 5 (2). pp. 65-69.

Song, Yufei and Wang, Wei and Ge, Lei and Xu, Xiaomin and Zhang, Zhenbao and Juliao, Paulo Sergio Barros and Zhou, Wei and Shao, Zongping (2017) Rational design of a water-storable hierarchical architecture decorated with amorphous barium oxide and nickel nanoparticles as a solid oxide fuel cell anode with excellent sulfur tolerance. Advanced Science, 4 (11).

Song, Pingan and Wang, Cong and Chen, Lei and Zheng, Yiqi and Liu, Lina and Wu, Qiang and Huang, Guobo and Yu, Youming and Wang, Hao (2017) Thermally stable, conductive and flame-retardant nylon 612 composites created by adding two-dimensional alumina platelets. Composites Part A: Applied Science and Manufacturing, 97. ISSN 1359-835X

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2017) Analysis of stress concentration factor for tensile characteristics of syntactic foam using finite element method. Journal of Research Updates in Polymer Science, 6 (1). pp. 21-32.

Salleh, Zulzamri (2017) Characterisation of syntactic foams for marine applications. [Thesis (PhD/Research)]

Shar, Bruce (2017) Dual-camera infrared guidance for computed tomography biopsy procedures. [Thesis (PhD/Research)]

Song, Pingan and Xu, Zhiguang and Wu, Yuanpeng and Cheng, Qunfeng and Guo, Qipeng and Wang, Hao (2017) Super-tough artificial nacre based on graphene oxide via synergistic interface interactions of Pi-Pi stacking and hydrogen bonding. Carbon, 111. pp. 807-812. ISSN 0008-6223

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Su, Haibin (2017) Vinyl ester/glass microballoon syntactic foams with low density. International Research Journal of Materials Sciences and Applications, 2017 (1). pp. 1-25. ISSN 2575-1034

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda and Su, Haibin (2016) Mechanical properties of sandwich composite made of syntactic foam core and GFRP skins. AIMS Materials Science, 3 (4). pp. 1704-1727. ISSN 2372-0468

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2016) Determination of coefficient thermal expansion of glass microballoon/vinyl ester syntactic foams. In: 3rd Advanced Materials Conference (AMC 2016): Advanced Materials for Sustainability and Growth, 28-29 Nov 2016, Lagkawi, Malaysia.

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2016) Thermogravimetry analysis on fused borosilicate syntactic foams. In: 3rd Advanced Materials Conference (AMC 2016): Advanced Materials for Sustainability and Growth, 28-29 Nov 2016, Langkawi, Malaysia.

Sedgman, Kristan (2016) Analysis of circular section blade profiles in a simple peripheral drag VAWT: design investigations and performance modelling. [USQ Project]

Smith, C. Morgan (2016) Battery SMART charge controller/combined co-gen grid connected inverter design and simulation. [USQ Project]

Saika, K. (2016) Design analysis of the bearing component of the hip joint prosthesis to improve distribution of forces and frictional wear. [USQ Project]

Stephenson, Ryan (2016) Design and implementation of web-based keystroke analytics for user verification. [USQ Project]

Shephard, Steven (2016) Home based solar power generation, storage and localised grids. [USQ Project]

Stephens, John (2016) Projectile mass distribution following impacts on hardened steel plate. [USQ Project]

Stephens, Benjamin (2016) Sensor to improve detection of line break or earth faults for Victorian answer lines. [USQ Project]

Steel, James (2016) Signal processing techniques for machine condition monitoring. [USQ Project]

Starkey, Dean (2016) Vibroacoustic transformer condition monitoring. [USQ Project]

Smith, Sathya (2016) Wearable technology and gesture recognition for live performance augmentation. [USQ Project]

Santarossa, Matthew and Das, Narottam and Helwig, Andreas and Ahfock, Tony (2016) Energy management and automated analytics for reduction of energy consumption. In: 26th Australasian Universities Power Engineering Conference (AUPEC 2016), 25-28 Sept 2016, Brisbane, Australia.

Sitinamaluwa, Hansinee and Wang, Mingchao and Will, Geoffrey and Senadeera, Wijitha and Zhang, Shanqing and Yan, Cheng (2016) Structural transformations and mechanics of amorphous silicon anodes during initial lithian-delithiation cycle. In: Energy Future Conference 2016, 4-6 July 2016, Sydney, Australia.

Silitonga, A. S. and Masjuki, H. H. and Ong, Hwai Chyuan and Kusumo, F. and Yusaf, Talal and Mahlia, T. M. I. (2016) Synthesis and optimization of Hevea brasiliensis and Ricinus communis as feedstock for biodiesel production: a comparative study. Industrial Crops and Products, 85. pp. 274-286. ISSN 0926-6690

Salleh, Z. and Islam, M. M. and Epaarachchi, J. A. (2016) Analysis of stress concentration factor around the hole of syntactic foam tensile specimens. International Journal of Advances in Science, Engineering and Technology, 4 (3). pp. 102-106. ISSN 2321-8991

Sitinamaluwa, H. S. and Wang, M. C. and Will, G and Senadeera, W. and Zhang, S. and Yan, C. (2016) Lithium concentration dependent structure and mechanics of amorphous silicon. Journal of Applied Physics, 119 (24). pp. 1-6. ISSN 0021-8979

Smith, Mark and Maiti, Ananda and Maxwell, Andrew D and Kist, Alexander A (2016) Augmented and mixed reality features and tools for remote laboratory experiment. International Journal of Online Engineering, 12 (7). pp. 45-52. ISSN 1868-1646

Sharifian, Ahmad and Hashempour, Javad (2016) A novel ember shower simulator for assessing performance of low porosity screens at high wind speeds against firebrand attacks. Journal of Fire Sciences, 34 (4). pp. 335-355. ISSN 0734-9041

Sitinamaluwa, Hansinee and Zhang, Shanqing and Senadeera, Wijitha and Will, Geoffrey and Yan, Cheng (2016) Carbon-based silicon nanohybrid anode materials for rechargeable lithium ion batteries. Materials Technology, 31 (14). pp. 872-883. ISSN 1066-7857

Shalal, Nagham Jamil Dawood (2016) Orchard mapping and mobile robot localisation using on-board camera and laser scanner data fusion. [Thesis (PhD/Research)]

Soufi, Masoud Dehghani and Ghobadian, Barat and Najafi, Gholamhassan and Sabzimaleki, Mohammad Reza and Yusaf, Talal (2015) TOPSIS multi-criteria decision modeling approach for biolubricant selection for two-stroke petrol engines. Energies, 8 (12). pp. 13960-13970. ISSN 1996-1073

Suero, Silvia Roman and Cano, Beatriz Ledesma and Alvarez-Murillo, Andres and Al-Kassir, Awf and Yusaf, Talal (2015) Glycerin, a biodiesel by-product with potentiality to produce hydrogen by steam gasification. Energies, 8 (11). pp. 12765-12775. ISSN 1996-1073

Santarossa, Matthew (2015) Energy Management & Automated Analytics. [USQ Project]

Snelgar, Daniel (2015) Implementing Industry Best Practice Alarm Management. [USQ Project]

Spurry, Nicholas (2015) Critical analysis of RCM in an Australian ANSP context. [USQ Project]

Sadanala, Swapan (2015) Failure analysis of total hip replacement and the feasibility of fibre composites as an alternative material. [USQ Project]

Shalal, Nagham and Low, Tobias and McCarthy, Cheryl and Hancock, Nigel (2015) Orchard mapping and mobile robot localisation using on-board camera and laser scanner data fusion – Part A: tree detection. Computers and Electronics in Agriculture, 119. pp. 254-266. ISSN 0168-1699

Shalal, Nagham and Low, Tobias and McCarthy, Cheryl and Hancock, Nigel (2015) Orchard mapping and mobile robot localisation using on-board camera and laser scanner data fusion – Part B: mapping and localisation. Computers and Electronics in Agriculture, 119. pp. 267-278. ISSN 0168-1699

Seeney, Luke (2015) Project performance measures for civil construction projects associated with different procurement strategies. [USQ Project]

Sitinamaluwa, Hansinee and Wang, Mingchao and Will, Geoffrey and Senadeera, Wijitha and Ling, Ming and Zhang, Shanqing and Yan, Cheng (2015) Numerical investigation on structural evolution and mechanical behaviour of amorphous silicon Li ion battery anodes. In: 9th International Mesostructured Materials Symposium (IMMS-9), 17-20 Aug 2015, Brisbane, Australia.

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2015) Compressive behaviour of low density polymeric syntactic foams. Applied Mechanics and Materials, 799-800. pp. 135-139. ISSN 1660-9336

Sharifian, Ahmad and Tangalajuk Siang, Jeri (2015) Impacts of room temperature on the performance of a portable propane air conditioner. International Journal of Air-Conditioning and Refrigeration, 23 (2). pp. 1550015-1. ISSN 2010-1325

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2015) Mechanical properties of low density glass microballoon/vinyl ester syntactic foam for marine application. In: 12th Composites Australia and CRC-ACS Conference 2015: Game On, 21-23 April 2015, Gold Coast, Australia.

Salim, Omar Hazim (2015) Cooperative systems based signal processing techniques with applications to three-dimensional video transmission. [Thesis (PhD/Research)]

Salleh, Zulzamri and Islam, Md Mainul and Epaarachchi, Jayantha Ananda (2014) Compressive properties of ceramic microballoon syntactic foams. In: 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014), 26-27 Dec 2014, Khulna, Bangladesh.

Salim, Omar H. and Xiang, Wei and Leis, John and Cao, Lei (2014) Cross-layer optimization for 3-D video transmission over cooperative relay systems. Signal Processing: Image Communication, 29 (10). pp. 1102-1120. ISSN 0923-5965

Shepherd, Nathan (2014) Optimisation of outside air pre-cooling via underground conductive heat transfer. [USQ Project]

Sambamo, Richard (2014) FEA analysis of tractor axle modification. [USQ Project]

Sunzu, Tony Bonaventure (2014) Improving electricity network utilisation with distributed energy storage systems. [USQ Project]

Stern, Nathan (2014) Machine vision detection of crop diseases. [USQ Project]

Sahay, Akshay Jaishil (2014) VAR controller for STATCOM solar inverter. [USQ Project]

Salim, Omar Hazim and Nasir, Ali A. and Mehrpouyan, Hani and Xiang, Wei and Durrani, Salman and Kennedy, Rodney A. (2014) Channel, phase noise, and frequency offset in OFDM systems: joint estimation, data detection, and hybrid Cramer-Rao lower bound. IEEE Transactions on Communications, 62 (9). pp. 3311-3325. ISSN 0090-6778

Siuly, and Li, Yan (2014) A novel statistical algorithm for multiclass EEG signal classification. Engineering Applications of Artificial Intelligence, 34. pp. 154-167. ISSN 0952-1976

Shalwan, A. and Yousif, B. F. (2014) Influence of date palm fibre and graphite filler on mechanical and wear characteristics of epoxy composites. Materials and Design, 59. 264-273. ISSN 0264-1275

Salim, Omar H. and Nasir, Ali A. and Xiang, Wei and Kennedy, Rodney A. (2014) Joint channel, phase noise, and carrier frequency offset estimation in cooperative OFDM systems. In: IEEE International Conference On Communications (ICC 2014): Communications: Centrepoint of the Digital Economy, 10-14 Jun 2014, Sydney, Australia.

Shahid, Syed Salman and Bikson, Marom and Salman, Humaira and Wen, Peng and Ahfock, Tony (2014) The value and cost of complexity in predictive modelling: role of tissue anisotropic conductivity and fibre tracts in neuromodulation. Journal of Neural Engineering, 11 (3). pp. 1-19. ISSN 1741-2560

Senadeera, W. and Adiletta, G. and Di Matteo, M. and Russo, P. (2014) Drying kinetics, quality changes and shrinkage of two grape varieties of Italy. Applied Mechanics and materials, 553. pp. 362-366. ISSN 1660-9336

Shi, Jun and Xiang, Wei and Liu, Xiaoping and Zhang, Naitong (2014) A sampling theorem for the fractional Fourier transform without band-limiting constraints. Signal Processing, 98. pp. 158-165. ISSN 0165-1684

Sileh, Ibrahim Khalil (2014) Adaptive relaying protocol multiple-input multiple-output orthogonal frequency division multiplexing systems. [Thesis (PhD/Research)]

Shadidi, Behdad and Yusaf, Talal and Alizadeh, Hossein Haji Agha and Ghobadian, Barat (2014) Experimental investigation of the tractor engine performance using diesohol fuel. Applied Energy, 114. pp. 874-879. ISSN 0306-2619

Shahid, Salman and Wen, Peng and Ahfock, Tony (2014) Assessment of electric field distribution in anisotropic cortical and subcortical regions under the influence of tDCS. Bioelectromagnetics , 35 (1). pp. 41-57. ISSN 0197-8462

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-Tak (2014) Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts. Journal of Multifunctional Composites, 2 (1). pp. 61-66. ISSN 2168-4278

Shalwan, A. and Yousif, B. F. (2014) Investigation on interfacial adhesion of date palm/epoxy using fragmentation technique. Materials and Design , 53. pp. 928-937. ISSN 0261-3069

Salleh, Z. and Islam, M. M. and Ku, H. (2014) Study on compressive properties of syntactic foams for marine applications. Journal of Multifunctional Composites, 2 (1). pp. 21-27. ISSN 2168-4278

Shamsuddoha, Md (2014) Behaviour of infilled rehabilitation system with composites for steel pipe. [Thesis (PhD/Research)]

Salleh, Z. and Islam, M. M. and Yusop, M. Y. M. and Idrus, M. A. Munaim M. (2014) Mechanical properties of activated carbon (AC) coconut shell reinforced polypropylene composites encapsulated with epoxy resin. In: 5th International Conference on Chemical, Biological and Environmental Engineering (ICBEE 2013), 14-15 Sep 2013, New Delhi, India.

Senadeera, Wijitha (2014) Model for internal porosity development of different shaped foods. In: International Research Symposium on Postharvest Technology 2014: Safe Food for Healthy Life, 19 June 2014, Anuradapura, Sri-Lanka.

Shalal, Nagham and Low, Tobias and McCarthy, Cheryl and Hancock, Nigel (2013) A preliminary evaluation of vision and laser sensing for tree trunk detection and orchard mapping. In: Australasian Conference on Robotics and Automation (ACRA 2013), 2-4 Dec 2013, Sydney, Australia.

Sileh, Ibrahim Khalil and Xiang, Wei and Maxwell, Andrew (2013) Power allocation of distributed space-frequency coding for OFDM-based hybrid relay selection. In: 7th International Conference on Signal Processing and Communication Systems (ICSPCS 2013), 16-18 Dec 2013, Gold Coast, Australia.

Salleh, Zulzamri and Islam, Md Mainul and Yusop, M. Y. M. and Muhamad, M. S. (2013) Tensile behaviours of activated carbon (AC) coconut shell reinforced recycle polyethylene (PET) hybrid composites. In: 12th International Conference on Frontiers of Polymers and Advanced Materials (ICFPAM 2013), 8-13 Dec 2013, Auckland, New Zealand.

Sana, Newman (2013) Air particle monitoring using image processing. [USQ Project]

Szabo, Phillip (2013) Development of a pump efficiency monitor for use in cotton irrigation. [USQ Project]

Skillington, Robert George (2013) DSP based lock-in amplifier. [USQ Project]

Sutcliffe, John William (2013) Urban wind turbine characterization system. [USQ Project]

Shalal, N. and Low, T. and McCarthy, C. and Hancock, N. (2013) A review of autonomous navigation systems in agricultural environments. In: SEAg 2013: Innovative Agricultural Technologies for a Sustainable Future, 22-25 Sept 2013, Barton, Western Australia.

Sileh, Ibrahim Khalil and Xiang, Wei and Maxwell, Andrew (2013) Error probability of OFDM-based hybrid relay protocols over wideband fading channels. In: IEEE International Conference on Ultra-Wideband (ICUWB 2013), 15-18 Sep 2013, Sydney, Australia.

Sileh, Ibrahim Khalil and Xiang, Wei and Maxwell, Andrew (2013) Joint subcarrier pairing and resource allocation for adaptive hybrid relay protocol in OFDM systems. In: 24th IEEE International Symposium on Personal Indoor and Mobile Radio Communications (PIMRC 2013), 8-11 Sep 2013 , London, United Kingdom.

Silitonga, A. S. and Ong, H. C. and Masjuki, H. H. and Mahlia, T. M. I. and Chong, W. T. and Yusaf, Talal F. (2013) Production of biodiesel from Sterculia foetida and its process optimization. Fuel: the science and technology of fuel and energy , 111. pp. 478-484. ISSN 0016-2361

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2013) Development of artificial neural network model in predicting performance of the smart wind turbine blade. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Salleh, Z. and Islam, M. M. and Ku, H. (2013) Tensile behaviours of activated carbon coconut shell filled epoxy composites. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Senadeera, W. and Alves-Filho, O. and Eikevik, T. (2013) Influence of drying conditions on the moisture diffusion and fluidization quality during multi-stage fluidized bed drying of bovine intestine for pet food. Food and Bioproducts Processing, 91 (C4). pp. 549-557. ISSN 0960-3085

Salleh, Z. and Islam, M. M. and Ku, H. (2013) Preliminary study on the development of syntactic foams for marine applications. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2013) Smart structure for small wind turbine blade. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak (2013) Cure shrinkage in epoxy grouts for grouted repairs. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

T

Tangalajuk Siang, Jeri and Sharifian, Ahmad (2017) Extending the capillary tube of a propane air-conditioner to reduce the refrigerant charge. Energy Procedia, 110. pp. 229-234.

Tangalajuk Siang, Jeri and Sharifian, Ahmad (2017) Performance of a single-duct portable propane air conditioning system under different refrigerant charge levels. Heat Transfer - Asian Research, 46 (8). pp. 1246-1261. ISSN 1099-2871

Taylor, Scott (2016) Implementation of negative phase sequence protection in the high voltage distribution network. [USQ Project]

Thorley, Mark (2016) Using renewable DC energy sources: improving domestic energy efficiency. [USQ Project]

Tien, C. M. T and Ngo-Cong, D. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2016) High-order fluid solver based on a combined compact integrated RBF approximation and its fluid structure interaction applications. Computers and Fluids, 131. pp. 151-168. ISSN 0045-7930

Tien, C. M. T. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2016) A numerical study of compact approximations based on flat integrated radial basis functions for second-order differential equations. Computers and Mathematics with Applications, 72 (9). pp. 2364-2387. ISSN 0898-1221

Tien, Cam Minh Tri (2016) Coupled/combined compact IRBF schemes for fluid flow and FSI problems. [Thesis (PhD/Research)]

Tien, C. M. T. and Mai-Duy, N. and Ngo-Cong, D. and Tran, C. D. and Tran-Cong, T. (2015) Stable integrated RBF calculation using preconditioning and high-order compact approximation for second-order PDEs. In: Eleventh International Conference on Computational Fluid Dynamics in the Minerals and Process Industries 2015 , 7-9 Dec 2015 , Melbourne, Victoria.

Tao, Jinglong and He, Dongning and Tang, Bin and Kong, Lingxue and Luo, Yongyue and Zhao, Pengfei and Gong, Wei and Peng, Zheng (2015) In situ synthesis of natural rubber latex-supported gold nanoparticles for flexible SERS substrates. RSC Advances, 5 (61). pp. 49168-49174.

Thibbotuwawa, Namal and Oloyede, Adekunle and Senadeera, Wijitha and Li, Tong and Gu, YuanTong (2015) Investigation of the mechanical behavior of kangaroo humeral head cartilage tissue by a porohyperelastic model based on the strain-rate-dependent permeability. Journal of the Mechanical Behavior of Biomedical Materials, 51. pp. 248-259. ISSN 1751-6161

Triaca, Bryan F (2015) Disposable stormwater sampling device for water quality hazard detection. [USQ Project]

Timings, Philip (2015) Isolated grid solar-battery support for SWER. [USQ Project]

Thibbotuwawa, Namal and Oloyede, Adekunle and Li, Tong and Singh, Sanjileena and Senadeera, Wijitha and Gu, YuanTong (2015) Physical mechanisms underlying the strain-rate-dependent mechanical behavior of kangaroo shoulder cartilage. Applied Physics Letters, 107 (10). pp. 103701-1. ISSN 0003-6951

Tien, C. M. T. and Thai-Quang, N. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2015) High-order fully coupled scheme based on compact integrated RBF approximation for viscous flows in regular and irregular domains. CMES: Computer Modeling in Engineering and Sciences, 105 (4). pp. 301-340. ISSN 1526-1492

Tien, C. M. T. and Pham-Sy, N. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2015) A high-order coupled compact integrated RBF approximation based domain decomposition algorithm for second-order differential problems. CMES: Computer Modeling in Engineering and Sciences, 104 (4). pp. 251-304. ISSN 1526-1492

Tien, C. M. T. and Thai-Quang, N. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2015) A three-point coupled compact integrated RBF scheme for second-order differential problems. CMES: Computer Modeling in Engineering and Sciences, 104 (6). pp. 425-469. ISSN 1526-1492

Thota, Narasimha and Epaarachchi, Jayantha and Lau, Kin Tak (2015) Evaluation of the blunt thoracic trauma caused by solid sports ball impacts. Journal of Biomechanical Science and Engineering, 10 (2).

Teo, Siow Hwa and Islam, Aminul and Yusaf, Talal and Taufiq-Yap, Yun Hin (2014) Transesterification of Nannochloropsis oculata microalga's oil to biodiesel using calcium methoxide catalyst. Energy, 78. pp. 63-71. ISSN 0360-5442

Thota, Narasimha M. and Epaarachchi, Jayantha A. and Lau, Kin Tak (2014) Effect of energy absorbing mechanisms on the blunt thoracic trauma caused by ballistic impacts. In: 8th Australasian Congress on Applied Mechanics, 24-26 Nov 2014, Melbourne, Australia.

Thota, Narasimha and Epaarachchi, Jayantha and Lau, Kin Tak (2014) Viscous criterion and its relation with the projectile-thorax energy interactions. In: 8th Australasian Congress on Applied Mechanics, 24-26 Nov 2014, Melbourne, Australia.

Thota, Narasimha M. and Epaarachchi, Jayantha A. and Lau, Kin Tak (2014) Evaluation of the blunt thoracic trauma due to baseball impacts – review of the Blunt Criterion. In: 8th Australasian Congress on Applied Mechanics, 24-26 Nov 2014, Melbourne, Australia.

Thota, Narasimha M. and Epaarachchi, Jayantha A. and Lau, Kin Tak (2014) Review of anthropomorphic test dummies for the evaluation of thoracic trauma due to blunt ballistic impacts. In: 8th Australasian Congress on Applied Mechanics, 24-26 Nov 2014, Melbourne, Australia.

Trevorrow, Brendan (2014) Rhythmic constant pitch time stretching for digital audio. In: 43rd International Congress on Noise Control Engineering (INTERNOISE 2014): Improving the World Through Noise Control, 16-19 Nov 2014, Melbourne, Australia.

Taylor, Patrick (2014) Supercritical carbon dioxide geothermal energy system analysis. [USQ Project]

Taylor, Patrick (2014) Supercritical CO2 geothermal energy system analysis. [USQ Project]

Tien, C. M. T. and Thai-Quang, N. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2014) A fully coupled scheme for viscous flows in regular and irregular domains using compact integrated RBF approximation. Applied Mechanics and Materials, 553. pp. 138-143. ISSN 1662-7482

Thai-Quang, Nha (2014) Compact integrated radial basis function modelling of particulate suspensions. [Thesis (PhD/Research)]

Thota, Narasimha (2014) Development and validation of a mechanical thorax surrogate for the evaluation of the blunt trauma due to ballistic impacts. [Thesis (PhD/Research)]

Thibbotuwawa, N. and Oloyede, A. and Senadeera, W. and Gu, Y. T. (2014) Hyperelastic constitutive relationship for the strain-rate dependent behavior of shoulder and other joint cartilages. In: 15th International Conference on Biomedical Engineering (ICBME 2013) , 4-7 Dec 2013, Singapore.

Thorpe, David (2013) Reflections on assessment: comparison of assessment processes for postgraduate engineering management courses. In: Proceedings of the 24th Annual Conference of the Australasian Association for Engineering Education (AaeE 2013): Work Integrated Learning-Applying Theory to Practice in Engineering Education, 8-11 Dec 2013, Gold Coast, Australia.

Thai-Quang, N. and Le-Cao, K. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2013) A numerical scheme based on compact integrated-RBFs and Adams-Bashforth/Crank-Nicolson algorithms for diffusion and unsteady fluid flow problems. Engineering Analysis with Boundary Elements , 37 (12). pp. 1653-1667. ISSN 0955-7997

Trevorrow, B. (2013) Investigation of digital audio manipulation methods. [USQ Project]

Tonkin, Kyle (2013) Make Garfield (6 axis robot arm) Smart through the design and implementation of voice recognition and control. [USQ Project]

Tangalajuk Siang, Jeri and Sharifian, Ahmad (2013) Reducing the mass of the refrigerant in the capillary tube of a propane air-conditioner. In: 14th Asian Congress of Fluid Mechanics (14 ACFM), 15-19 Oct 2013, Hanoi, Vietnam.

Timings, James (2013) Unmanned aerial vehicle static object detection. [USQ Project]

Tran, Canh-Dung (2013) Dry spinning carbon nanotubes into continuous yarns: progress, processing and applications. In: Nanotube superfiber materials: changing engineering design. Elsevier, Oxford, United Kingdom, pp. 211-242. ISBN 978-1-4557-7863-8

Trethewey, M. (2013) Measuring strain using microwave energy. [Thesis (PhD/Research)]

Thai-Quang, N. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2013) A direct forcing immersed boundary method employed with compact integrated RBF approximations for heat transfer and fluid flow problems. CMES: Computer Modeling in Engineering and Sciences, 96 (1). pp. 49-90. ISSN 1526-1492

U

Udomsripaiboon, Thana (2017) Adjustable dynamic range for paper reduction schemes in large-scale MIMO-OFDM systems. [Thesis (PhD/Research)]

V

Vever, Thierry-Jacques Patrick (2015) Insulated container testing & rating system development. [USQ Project]

Vadalma, Anthony (2014) Infant transport incubator cold performance. [USQ Project]

W

Wang, Zhanke and Ge, Lei and Li, Mengran and Lin, Rijia and Wang, Hao and Zhu, Zhonghua (2019) Orientated growth of copper-based MOF for acetylene storage. Chemical Engineering Journal, 357. pp. 320-327. ISSN 1385-8947

Wu, Linmei and Liu, Peng and Zhang, Zuhua and Zhu, DeJu and Wang, Hao (2018) Multiscale modeling for high-performance concrete: a review. International Journal for Multiscale Computational Engineering, 16 (1). pp. 1-17. ISSN 1543-1649

Wandel, Andrew P. and Lindstedt, R. Peter (2017) Mixture-fraction based hybrid binomial-langevin–MMC modelling applied to auto-ignition in vitiated flow. In: 11th Asia-Pacific Conference on Combustion, 10-14 Dec 2017, Sydney, Australia.

Wijerathne, W. D. C.C. and Turner, I. W. and Sauret, E and Karunasena, H. C. P. and Senadeera, W and Gu, Y. T. (2017) A multiscale coarse grained model for simulating mechanical responses of plant food tissues. In: 8th International Conference on Computational Methods (ICCM 2017), 25-29 July 2017, Guilin, Guangxi, China.

Wandel, Andrew P. and Brink, Gavin N. and Hancock, Nigel H. and Pather, Selvan (2017) Spreading rate and dispersion behavior of evaporation-suppressant monolayer on open water surfaces: part 2 – under wind stress. Experimental Thermal and Fluid Science, 87. pp. 171-181. ISSN 0894-1777

Wu, L. and Liu, P. and Shi, C. and Zhang, Z. and Bui, Tinh Quoc and Jiao, D. (2016) Edge-based smoothed extended finite element method for dynamic fracture analysis. Applied Mathematical Modelling, 40 (19-20). pp. 8564-8579. ISSN 0307-904X

Wentworth, B. (2016) Circuit breaker simulated operation & behaviour under faulted power system conditions. [USQ Project]

Walker, Sam (2016) Integration effectiveness between engineering teams on complex defence programs. [USQ Project]

Wicks, Jorja (2016) Remote access intravenous pump emulator training system. [USQ Project]

Wang, Yueqiong and Liao, Lusheng and Zhong, Jieping and He, Dongning and Xu, Kui and Yang, Changjin and Luo, Yongyue and Peng, Zheng (2016) The behavior of natural rubber–epoxidized natural rubber–silica composites based on wet masterbatch technique. Journal of Applied Polymer Science, 133 (26). pp. 43571-43579. ISSN 0021-8995

Wall, Rhyan (2015) Improved cooling system for USQ's small scale icing wind tunnel. [USQ Project]

Wandel, Andrew P. and Robinson, Clare and Abdulla, Shahab and Dalby, Tim and Frederiks, Anita and Galligan, Linda (2015) Students' mathematical preparation: differences in staff and student perceptions. International Journal of Innovation in Science and Mathematics Education, 23 (1). pp. 82-93. ISSN 1836-0858

Wang, Hao and Schubel, Peter and Yi, Xiaosu and Zhu, Jin and Ulven, Chad and Qiu, Yiping (2015) Green composite materials [Editorial]. Advances in Materials Science and Engineering, 2015. ISSN 1687-8434

Wang, Gengkun and Xiang, Wei and Yuan, Jinhong (2015) Multihop compute-and-forward for generalised two-way relay channels. Transactions on Emerging Telecommunications Technologies, 26 (3). pp. 448-460.

Wandel, Andrew P. and Jolly, Hannah (2014) Effecting teamwork outcomes in online courses. In: 25th Annual Conference of the Australasian Association for Engineering Education (AAEE 2014): Engineering the Knowledge Economy: Collaboration, Engagement and Employability, 8-10 Dec 2014, Wellington, New Zealand.

Windebank, Mark (2014) Locomotive cooling system strategy optimisation. [USQ Project]

Wandel, Andrew P. (2014) Influence of scalar dissipation on flame success in turbulent sprays with spark ignition. Combustion and Flame, 161 (10). pp. 2579-2600. ISSN 0010-2080

Wooldridge, Damien Christopher (2014) Methods of feeding out white cottonseed to livestock. [USQ Project]

Watson, P. (2014) Non-contact visual soil moisture content estimation. [USQ Project]

Wang, Gengkun and Xiang, Wei and Yuan, Jinhong (2014) Generalized wireless network coding schemes for multihop two-way relay channels. IEEE Transactions on Wireless Communications, 13 (9). pp. 5132-5147. ISSN 1536-1276

Walker, Lauren and Senadeera, Wijitha (2014) A variable diffusivity model for the drying of spherical food particulates. Applied Mechanics and Materials, 553. pp. 94-99. ISSN 1660-9336

Wang, Li-li and Zhang, Tao and Yan, Hong-quiang and Peng, Mao and Fang, Zheng-ping and Li, Yan and Wang, Hao (2014) Flame-retardant coating by alternate assembly of poly(vinylphosphonic acid) and polyethylenimine for ramie fabrics. Chinese Journal of Polymer Science, 32 (3). pp. 305-314. ISSN 0256-7679

Wandel, Andrew P. and Jokic, Michael D. and Kist, Alexander A. (2013) Caring and sharing computer files with configuration management. In: 24th Annual Conference of the Australasian Association for Engineering Education (AaeE 2013): Work Integrated Learning-Applying Theory to Practice in Engineering Education, 8-11 Dec 2013, Gold Coast, Australia.

Wang, Hao and Lau, Alan K.T. (2013) Hemp and hemp-based composites. In: Green composites from natural resources. Taylor & Francis (CRC Press), Boca Raton, FL. United States, pp. 63-94. ISBN 978-1-4665-7069-6

Wandel, Andrew P. (2013) Mixture fraction probability density functions in sparse spray flames with spark ignition. In: 7th Australian Combustion Symposium (ACS 2013), 6-8 Nov 2013, Perth, Australia .

White, Christopher (2013) Wireless grain silo monitoring and control. [USQ Project]

Wang, Gengkun and Xiang, Wei and Wang, Yafeng (2013) Generalized compute-and-forward schemes for multi-hop two-way relay channels. In: IEEE 78th Vehicular Technology Conference (VTC 2013 Fall): Connecting the Mobile World, 2-5 Sep 2013, Las Vegas, NV. United States.

Wandel, Andrew P. (2013) Conditional dissipation of scalars in homogeneous turbulence: closure for MMC modelling. Combustion Theory and Modelling , 17 (4). pp. 707-748. ISSN 1364-7830

Wang, Hao and Kabir, Mazed and Lau, K. T. (2013) Chemical treatments on hemp fibre composites. In: Fiber Society Spring 2013 Technical Conference (FS 2013): Advancing Scientific Knowledge Pertaining to Fibers and Fibrous Materials, 22-24 May 2013, Geelong, Australia.

X

Xia, Wen and He, Dongning and Fu, Yun-fei and Wei, Xiao-yi and Liu, Hong-chao and Ye, Jiang-ping and Liu, Yun-fei and Li, Ji-hua (2017) Advanced technology for nanostarches preparation by high speed jet and its mechanism analysis. Carbohydrate Polymers, 176. pp. 127-134. ISSN 0144-8617

Xiang, Wei and Wang, Gengkun and Pickering, Mark and Zhang, Yongbing (2016) Big video data for light-field-based 3D telemedicine. IEEE Network, 30 (3). pp. 30-38. ISSN 0890-8044

Xing, Fei and Zhao, Mengmeng and Zhao, Jian (2016) The brief introduction of different laser diagnostics methods used in aeroengine combustion research. Journal of Sensors (Article ID 2183569). pp. 1-13. ISSN 1687-725X

Xiao, Yue and Wang, Shunshun and Dan, Lilin and Lei, Xia and Yang, Ping and Xiang, Wei (2014) OFDM with interleaved subcarrier-index modulation. IEEE Communications Letters, 18 (8). pp. 1447-1450. ISSN 1089-7798

Y

Yan, Hongquiang and Sun, Chuang and Fang, Zhengping and Liu, Xiaoqing and Zhu, Jin and Wang, Hao (2016) Synthesis of an intrinsically flame retardant bio-based benzoxazine resin. Polymer, 97. pp. 418-427. ISSN 0032-3861

Yao, Xiao and Yang, Tao and Zhang, Zuhua (2016) Compressive strength development and shrinkage of alkali-activated fly ash–slag blends associated with efflorescence. Materials and Structures, 49 (7). pp. 2907-2918. ISSN 1359-5997

Yasin, Mohd Hafizil Mat and Mamat, Rizalman and Yusop, Ahmad Fitri and Paruka, Perowansa and Yusaf, Talal and Najafi, Gholamhassan (2015) Effects of exhaust gas recirculation (EGR) on a diesel engine fuelled with palm-biodiesel. Energy Procedia , 75. pp. 30-36.

Yue, Ziqi and Guo, Qing and Xiang, Wei (2015) Complex Gaussian belief propagation algorithms for distributed multicell multiuser MIMO detection. In: IEEE Global Communications Conference (GLOBECOM 2014), 8-12 Dec 2014, Austin, TX. United States.

Yousif, Belal (2015) Editor's introduction to special theme issue [of International Journal of Precision Technology]: Precision engineering and tribology. International Journal of Precision Technology, 5 (1). ISSN 1755-2060

Yusaf, Talal (2015) Evaluating the effect of heat transfer on cell disruption in ultrasound processes. Annals of Microbiology, 65 (3). pp. 1447-1456. ISSN 1590-4261

Yusaf, Talal and Al Juboori, Raed A. (2015) Numerical and experimental study of microorganism disruption using shock treatment. Journal of Biotechnology, 208 (Supplement). S15-S15. ISSN 0168-1656

Yadav, Orunganti Vara Prasad (2014) Voltage control in micro-grids. [USQ Project]

Yang, Tao and Yao, Xiao and Zhang, Zuhua (2014) Geopolymer prepared with high-magnesium nickel slag: characterization of properties and microstructure. Construction and Building Materials, 59. pp. 188-194. ISSN 0950-0618

Yusaf, Talal and Al-Juboori, Raed A. (2014) Alternative methods of microorganism disruption for agricultural applications. Applied Energy, 114. pp. 909-923. ISSN 0306-2619

Yousif, B. F. and Al-Haddad, A. and Alotaibi, J. GH. and Yusaf, T. F. (2014) Design of film thickness instrument for fibre polymer composites tribological experiments. Journal of Engineering Science and Technology, 9 (2). pp. 154-166. ISSN 1823-4690

Yusaf, Talal (2013) Experimental study of microorganism disruption using shear stress. Biochemical Engineering Journal, 79. pp. 7-14. ISSN 1369-703X

Yan, Z. L. and Zhang, J. C. and Lin, G. and Zhang, H. and Ding, Y. and Wang, H. (2013) Fabrication process optimization of hemp fibre-reinforced polypropylene composites. Journal of Reinforced Plastics and Composites, 32 (20). pp. 1504-1512. ISSN 0731-6844

Yu, Bao Yi and Wang, Qing and Li, Qiang and Wu, Yu Juan and Chen, Yan (2013) Interface microstructure and mechanical properties of copper/aluminum composite material. In: 3rd International Conference on Advanced Engineering Materials and Technology (AEMT 2013), 11-12 May 2013, Zhangjiajie, China.

Yusaf, T. and Baker, P. and Hamawand, I. and Noor, M. M. (2013) Effect of compressed natural gas mixing on the engine performance and emissions. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1416-1429. ISSN 2229-8649

Yusaf, Talal and Noor, M. M. and Wandel, Andrew P. (2013) Mild combustion: the future for lean and clean combustion. In: 2nd International Conference of Mechanical Engineering Research (ICMER 2013): Green Technology for Sustainable Environment, 1-3 Jul 2013, Pahang, Malaysia.

Z

Zhu, Qianqian and Zhuang, Wei and Niu, Huanqing and Ge, Lei and Villacorta Hernandez, Byron and Wu, Jinglan and Wang, Kai and Liu, Dong and Chen, Yong and Zhu, Chenjie and Ying, Hanjie (2018) Affinity induced immobilization of adenylate cyclase from the crude cell lysate for ATP conversion. Colloids and Surfaces B: Biointerfaces, 164. pp. 155-164. ISSN 0927-7765

Zhang, Zuhua and Zhu, Yingcan and Yang, Tao and Li, Liangfeng and Zhu, Huajun and Wang, Hao (2017) Conversion of local industrial wastes into greener cement through geopolymer technology: a case study of high-magnesium nickel slag. Journal of Cleaner Production, 141. pp. 463-471. ISSN 0959-6526

Zhang, Zuhua and Wang, Hao (2016) The pore characteristics of geopolymer foam concrete and their impact on the compressive strength and modulus. Frontiers in Materials, 3 (Article 38).

Zhang, Zuhua and Provis, John L. and Zou, Jin and Reid, Andrew and Wang, Hao (2016) Toward an indexing approach to evaluate fly ashes for geopolymer manufacture. Cement and Concrete Research, 85. pp. 163-173. ISSN 0008-8846

Zhang, Zuhua and Li, Liangfeng and Ma, Xue and Wang, Hao (2016) Compositional, microstructural and mechanical properties of ambient condition cured alkali-activated cement. Construction and Building Materials, 113. pp. 237-245. ISSN 0950-0618

Zhuang, Xiao Yu and Chen, Liang and Komarneni, Sridhar and Zhou, Chun Hui and Tong, Dong Shen and Yang, Hui Min and Yu, Wei Hua and Wang, Hao (2016) Fly ash-based geopolymer: clean production, properties and applications. Journal of Cleaner Production, 125. pp. 253-267. ISSN 0959-6526

Zhang, Zuhua and Li, Liangfeng and He, Dongning and Ma, Xue and Yan, Chunjie and Wang, Hao (2016) Novel self-supporting zeolitic block with tunable porosity and crystallinity for water treatment. Materials Letters, 178. pp. 151-154. ISSN 0167-577X

Zhang, Z. H. and Zhu, H. J. and Zhou, C. H. and Wang, H. (2016) Geopolymer from Kaolin in China: an overview. Applied Clay Science, 119 (1). pp. 31-41. ISSN 0169-1317

Zhou, Wei and Yan, Chunjie and Duan, Ping and Liu, Yi and Zhang, Zuhua and Qiu, Xiumei and Li, Dan (2016) A comparative study of high- and low-Al2O3 fly ash based-geopolymers: the role of mix proportion factors and curing temperature. Materials and Design , 95. pp. 63-74. ISSN 0264-1275

Zhao, M. M. and Choudhury, R. and Malpress, R. and Buttsworth, D. R. (2016) Absolute concentration measurements of OH* in an axisymmetric hydrogen-air premixed flame adjacent to a hot graphite model. In: 20th Australasian Fluid Mechanics Conference (AFMC), 5-8 Dec 2016, Perth,Australia.

Zhao, Mengmeng (2016) External hot surface axisymmetric models for supersonic combustion. [Thesis (PhD/Research)]

Zhao, Mengmeng and Buttsworth, David R. and Choudhury, Rishabh and Malpress, Ray and Xing, Fei (2016) Study of an axisymmetric backward facing step model in a supersonic flow. In: 21st AIAA International Space Planes and Hypersonics Technologies Conference (Hypersonics 2017), 6-9 March 2017, Xiamen, China.

Zhou, Hong and Noble, Christopher and Cotter, Julie (2015) Big data based intelligent decision support system for sustainable regional development. In: 2015 International Conference on Big Data Intelligence and Computing (DataCom 2015), 19-21 Dec 2015, Chengdu, China.

Zhou, Hong and Goold, Brad (2015) A domestic adaptable infant monitoring system using wireless sensor networks. In: 34th IEEE International Performance Computing and Communications Conference (IPCCC 2015), 14-16 Dec 2015, Nanjing, China.

Zhao, Li and Yan, Hongqiang and Fang, Zhengping and Wang, Jing and Wang, Hao (2015) On the flameproof treatment of ramie fabrics using a spray-assisted layer-by-layer technique. Polymer Degradation and Stability, 121. pp. 11-17. ISSN 0141-3910

Zhang, Zuhua and Provis, John L. and Reid, Andrew and Wang, Hao (2015) Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete. Cement and Concrete Composites, 62. pp. 97-105. ISSN 0958-9465

Zheng, Kan and Zhang, Xiaoli and Zheng, Qiang and Xiang, Wei and Hanzo, Lajos (2015) Quality-of-experience assessment and its application to video services in LTE networks. IEEE Wireless Communications, 22 (1). pp. 70-78. ISSN 1536-1284

Zheng, Kan and Zhao, Long and Mei, Jie and Dohler, Mischa and Xiang, Wei and Peng, Yuexing (2015) 10 Gb/s HetSNets with millimeter-wave communications: access and networking: challenges and protocols. IEEE Communications Magazine, 53 (1). pp. 222-231. ISSN 0163-6804

Zhang, Z. and Wang, H. (2015) Alkali-activated cements for protective coating of OPC concrete. In: Handbook of alkali-activated cements, mortars and concretes. Woodhead Publishing Series in Civil and Structural Engineering, 54. Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 605-626. ISBN 978-1-78242-276-1

Zhang, Z. and Wang, H. (2015) Analysing the relation between pore structure and permeability of alkali-activated concrete binders. In: Handbook of alkali-activated cements, mortars and concretes. Woodhead Publishing Series in Civil and Structural Engineering, 54. Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 235-264. ISBN 978-1-78242-276-1

Zhao, Li Zhi and Zhou, Chun Hui and Wang, Jing and Tong, Dong Shen and Yu, Wei Hua and Wang, Hao (2015) Recent advances in clay mineral-containing nanocomposite hydrogels. Soft Matter, 11 (48). pp. 9229-9246. ISSN 1744-683X

Zhang, Lijuan and Xiang, Wei and Tang, Xiaohu (2014) An adaptive anti-collision protocol for large-scale RFID tag identification. IEEE Wireless Communications Letters, 3 (6). pp. 601-604. ISSN 2162-2337

Zhou, Hong and Lu, Jie and Zhang, GuangQuan (2014) An extended bilevel programming model and its Kth-best algorithm for dynamic decision making in emergency situations. In: IEEE Symposium on Computational Intelligence in Multi-Criteria Decision-Making (MCDM), 9-12 Dec 2014, Orlando, Florida, USA.

Zhang, Zuhua and Provis, John L. and Reid, Andrew and Wang, Hao (2014) Fly ash-based geopolymers: the relationship between composition, pore structure and efflorescence. Cement and Concrete Research, 64. pp. 30-41. ISSN 0008-8846

Zhu, Huajun and Zhang, Zuhua and Zhu, Yingcan and Tian, Liang (2014) Durability of alkali-activated fly ash concrete: chloride penetration in pastes and mortars. Construction and Building Materials, 65. pp. 51-59. ISSN 0950-0618

Zhang, Zuhua and Provis, John L. and Reid, Andrew and Wang, Hao (2014) Geopolymer foam concrete: an emerging material for sustainable construction. Construction and Building Materials, 56. pp. 113-127. ISSN 0950-0618

Zhang, Zuhua and Wang, Hao and Zhu, Yingcan and Reid, Andrew and Provis, John L. and Bullen, Frank (2014) Using fly ash to partially substitute metakaolin in geopolymer synthesis. Applied Clay Science, 88-89. pp. 194-201. ISSN 0169-1317

Zhou, Hong and Qi, Haixia and Banhazi, Thomas and Low, Tobias (2014) An integrated WSN and mobile robot system for agriculture and environment applications. In: 10th International Conference on Mobile and Ubiquitous Systems: Computing, Networking and Services (MOBIQUITOUS 2013) , 2-4 Dec 2013, Tokyo, Japan.

Zheng, Kan and Liu, Fei and Xiang, Wei and Xin, Xuemei (2014) Dynamic downlink aggregation carrier scheduling scheme for wireless networks. IET Communications, 8 (1). pp. 114-123. ISSN 1751-8628

Zhao, Long and Xiang, Wei and Mei, Jie and Zhao, Hui and Long, Hang and Li, Lin (2014) Energy-efficient dual-iteration power allocation for two-phase relay system with massive antennas. International Journal of Antennas and Propagation, 2014. pp. 1-8. ISSN 1687-5869

Zohari, Mohd Hafizi Bin (2014) The applications of near infra-red fibre bragg grating sensors for wave propagation based structural health monitoring of thin laminated composite plates. [Thesis (PhD/Research)]

Zhang, Zuhua (2014) The effects of physical and chemical properties of fly ash on the manufacture of geopolymer foam concretes. [Thesis (PhD/Research)]

Zhou, Hong and Basnet, Badri and Pigozzo, Robyn (2013) Enriching career experience of international academics through language training and practicing programs. In: 24th Annual Conference of the Australasian Association for Engineering Education (AaeE 2013): Work Integrated Learning-Applying Theory to Practice in Engineering Education, 8-11 Dec 2013, Gold Coast, Australia.

Zhu, Huajun and Zhang, Zuhua and Deng, Fenggan and Cao, Yalong (2013) The effects of phase changes on the bonding property of geopolymer to hydrated cement. Construction and Building Materials, 48. pp. 124-130. ISSN 0950-0618

Zhang, Zuhua and Wang, Hao and Provis, John L. and Reid, Andrew (2013) Efflorescence: a critical challenge for geopolymer applications? In: Concrete Institute of Australia's Biennial National Conference (Concrete 2013): Understanding Concrete, 16-18 Oct 2013, Gold Coast, Australia.

Zhang, Zuhua and Wang, Hao and Provis, John L. and Reid, Andrew and Li, Qiang (2013) Durability of fly ash based-geopolymers: effect of crystallization on mechanical properties. In: 8th International Symposium on Cement and Concrete (ISCC 2013), 20-23 Sep 2013, Nanjing, China.

Zhang, Zuhua and Yang, Tao and Wang, Hao and Yao, Xiao (2013) Inorganic polymer foams: transform from non-structural to structural upon fire. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Zhang, Zuhua and Provis, John L. and Wang, Hao and Bullen, Frank and Reid, Andrew (2013) Quantitative kinetic and structural analysis of geopolymers Part 2. thermodynamics of sodium silicate activation of metakaolin. Thermochimica Acta , 565. pp. 163-171. ISSN 0040-6031

Zander, F. and Morgan, R. G. and Sheikh, U. and Buttsworth, D. R. and Teakle, P. R. (2013) Hot-wall reentry testing in hypersonic impulse facilities. AIAA Journal, 51 (2). pp. 476-484. ISSN 0001-1452

This list was generated on Wed Dec 12 13:07:29 2018 AEST.