Browse by Faculty / Department / School

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors Name | Date | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | V | W | X | Y | Z
Number of items: 823.

A

Al-saadi, Ali Umran and Aravinthan, Thiru and Lokuge, Weena (2018) Structural applications of fibre reinforced polymer (FRP) composite tubes: a review of columns members. Composite Structures, 204. pp. 513-524. ISSN 0263-8223

Abousnina, Rajab and Manalo, Allan and Lokuge, Weena and Al-Jabri, Khalifa (2018) Properties and structural behavior of concrete containing fine sand contaminated with light crude oil. Construction and Building Materials, 189. pp. 1214-1231. ISSN 0950-0618

Abeysekera, Vasantha and Shelke, Mayur (2018) The journey of exploring ‘construction as biological cells’ for improving construction quality: articulating the research paradigm. In: 10th International Conference on Construction in the 21st Century (CITC-10) , 2-4 July 2018, Colombo, Sri Lanka .

Aziz, N. and Mirzaghorbanali, A. and Yang, G. and Khaleghparast, S. and Rasekh, H. (2018) Innovative approach to strata reinforcement in coal mines with reference to evaluation cable bolts shear strength. Journal of Mining and Environment. pp. 1-13. ISSN 2251-8592

Abousnina, Rajab and Manalo, Allan and Lokuge, Weena and Zhang, Zuhua (2018) Effects of light crude oil contamination on the physical and mechanical properties of geopolymer cement mortar. Cement and Concrete Composites, 90. pp. 136-149. ISSN 0958-9465

Aziz, Naj and Rasekh, Haleh and Mirzaghorbanali, Ali and Yang, Guanyu and Khaleghparast, Saman and Nemcik, Jan (2018) An experimental study on the shear performance of fully encapsulated cable bolts in single shear test. Rock Mechanics and Rock Engineering. ISSN 0723-2632

Abdoli, Bahareh and Zare, Dariush and Jafari, Abdolabbas and Chen, Guangnan (2018) Evaluation of the air-borne ultrasound on fluidized bed drying of shelled corn: effectiveness, grain quality, and energy consumption. Drying Technology. pp. 1-18. ISSN 0737-3937

Al-Marafi, Mohammad and Somasundaraswaran, Kathirgamalingam (2018) Review of crash prediction models and their applicability in black spot identification to improve road safety. Indian Journal of Science and Technology, 11 (5). pp. 1-7. ISSN 0974-6846

Al-Rubaye, Mohammed (2018) Flexural behaviour of concrete slabs reinforced with gfrp bars and hollow composite reinforcing systems. [Thesis (PhD/Research)]

Abbott, T. and Gamage, N. and Setunge, S. and Lokuge, W. (2017) Predicting the remaining life of timber bridges. In: 12th World Congress on Engineering Asset Management & 13th International Conference on Vibration Engineering and Technology of Machinery , 2-4 August 2017, Brisbane, Australia.

Abeysekera, Vasantha and Shelke, Mayur (2017) Construction as biological cells: an exploratory study. International Journal of Construction Management. ISSN 1562-3599

Aziz, Naj and Majoor, Dean and Mirzaghorbanali, Ali (2017) Strength properties of grout for strata reinforcement. Procedia Engineering, 191. pp. 1178-1184.

Ardalan, R. Bani and Jamshidi, N. and Arabameri, H. and Joshaghani, A. and Mehrinejad, M. and Sharafi, P. (2017) Enhancing the permeability and abrasion resistance of concrete using colloidal nano-Si02 oxide and spraying nanosilicon practices. Construction and Building Materials, 146. pp. 128-135. ISSN 0950-0618

Abeysekera, Vasantha and Dhakal, Bibek (2017) A trade-based risk management approach towards the elimination of defects in residential construction. In: 9th International Conference on Construction in the 21st Century: Revolutionizing the Architecture, Engineering and Construction Industry through Leadership, Collaboration and Technology (CITC-9), 5-7 March 2017, Dubai, United Arab Emirates.

Abeysekera, Vasantha and Abeysekera, Ashoka (2017) Personalised study time plans, and study time management: a joint responsibility of staff, students, and university administrators. In: 9th International Conference on Construction in the 21st Century: Revolutionizing the Architecture, Engineering and Construction Industry through Leadership, Collaboration and Technology (CITC-9) , 5-7 March 2017, Dubai, United Arab Emirates.

Abbas, Mohd Azwan and Lichti, Derek D. and Chong, Albert K. and Setan, Halim and Majid, Zulkepli and Lau, Chong Luh and Idris, Khairulnizam M. and Ariff, Mohd Farid Mohd (2017) Improvements to the accuracy of prototype ship models measurement method using terrestrial laser scanner. Measurement, 100 . 301-310. ISSN 0263-2241

Ahmadinia, Esmaeil (2017) Redesigning the Austroads creep procedure for the evaluation of permanent deformation of asphalt pavements in Australia. [Thesis (PhD/Research)]

Apan, Armando and Suarez, Luz Angelica and Maraseni, Tek and Castillo, Jose Alan (2017) The rate, extent and spatial predictors of forest loss (2000-2012) in the terrestrial protected areas of the Philippines. Applied Geography, 81. pp. 32-42. ISSN 0143-6228

Alam, Md Jahangir and Dutta, Dushmanta (2016) A sub-catchment based approach for modelling nutrient dynamics and transport at a river basin scale. Water Resources Management, 30 (14). pp. 5455-5478. ISSN 0920-4741

Archbold, Scott (2016) An investigation into the accuracies and limitations of different methods of connecting to datum. [USQ Project]

Aziz, Muhammad Afiq and Idris, Khairulnizam M. and Majid, Zulkepli and Ariff, Mohd Farid Mohd and Yusoff, Ahmad Razali and Luh, Lau Chong and Abbas, Mohd Azwan and Chong, Albert K. (2016) A study about terrestrial laser scanning for reconstruction of precast concrete to support QCLASSIC assessment. In: International Conference on Geomatic and Geospatial Technology 2016, 3-5 Oct 2016, Kuala Lumpur, Malaysia.

Adams, Justin Mitchell (2016) Risk management in the construction of communication towers. [USQ Project]

Anderson, Elizabeth (2016) The application of visualisation techniques for stratum and strata boundaries within the New South Wales digital cadastre. [USQ Project]

Alenezi, Fahad T. A. S. M. (2016) Workability and compressive strength of eco-friendly concrete based on waste ceramic particles. [USQ Project]

Aryal, S. K. and Ashbolt, S. and McIntosh, B. S. and Petrone, K. P. and Maheepala, S. and Chowdhury, R. K. and Gardener, T. and Gardiner, R. (2016) Assessing and mitigating the hydrological impacts of urbanisation in semi-urban catchments using the Storm Water Management Model. Water Resources Management, 30 (14). pp. 5437-5454. ISSN 0920-4741

Al-Juboori, Raed A. and Yusaf, Talal and Pittaway, Pamela A. (2016) Exploring the correlations between common UV measurements and chemical fractionation for natural waters. Desalination and Water Treatment , 57 (35). pp. 16324-16335. ISSN 1944-3994

Aziz, Naj and Craig, Peter and Mirzaghorbanali, Ali and Nemcik, Jan (2016) Factors influencing the quality of encapsulation in rock bolting. Rock Mechanics and Rock Engineering, 49 (8). pp. 3189-3203. ISSN 0723-2632

Al-Juboori, Raed A. and Yusaf, Talal and Aravinthan, Vasantha and Pittaway, Pamela A. and Bowtell, Leslie (2016) Investigating the feasibility and the optimal location of pulsed ultrasound in surface water treatment schemes. Desalination and Water Treatment, 57 (11). pp. 4769-4787. ISSN 1944-3994

Aziz, Naj and Mirza, Ali and Nemcik, Jan and Rasekh, Haleh and Li, Xuwei (2016) A follow up to study the behaviour of cable bolts in shear: experimental study and mathematical modelling. In: 2016 Coal Operators' Conference, 10-12 Feb 2016, Wollongong, Australia.

Aziz, Naj and Mirza, Ali and Nemcik, Jan and Li, Xuwei and Rasekh, Haleh and Wang, Gaofeng (2016) Load transfer characteristics of plain and spiral cable bolts tested in new non rotating pull testing apparatus. In: 2016 Coal Operators' Conference, 10-12 Feb 2016, Wollongong, Australia.

Al-Juboori, Raed A. and Bowtell, Leslie A. and Yusaf, Talal and Aravinthan, Vasantha (2016) Insights into the scalability of magnetostrictive ultrasound technology for water treatment applications. Ultrasonics Sonochemistry, 28. pp. 357-366. ISSN 1350-4177

Abousnina, Rajab M. and Manalo, Allan and Shiau, Jim and Lokuge, Weena (2016) An overview on oil contaminated sand and its engineering applications. International Journal of GEOMATE, 10 (19). pp. 1615-1622. ISSN 2186-2982

Abousnina, Rajab M. and Manalo, Allan and Lokuge, Weena (2016) Physical and mechanical properties of cement mortar containing fine sand contaminated with light crude oil. Procedia Engineering, 145. 250- 258.

Abousnina, Rajab Mohamed B. (2016) Properties of mortar and concrete containing fine sand contaminated with light crude oil. [Thesis (PhD/Research)]

Al-Juboori, Raed A. and Aravinthan, Vasantha and Yusaf, Talal (2015) Impact of pulsed ultrasound on bacteria reduction of natural waters. Ultrasonics Sonochemistry, 27. pp. 137-147. ISSN 1350-4177

Alsinan, Abdulaziz (2015) Conductivity of wall materials based on natural fiber. [USQ Project]

Asghar, Muhammad Athar Aqeel (2015) Evaluation of strength characteristics of recycled bituminous pavement materials. [USQ Project]

Agoritsas, Stavroula (2015) Investigating the accuracy of terrestrial laser scanning within a rail environment. [USQ Project]

Alshehhi, Badr Ahmed and Thorpe, David and Goh, Steven (2015) Risk management in delivering complex research & development projects: a case of the United Arab Emirates Armed Forces Research & Development Center. In: 1st Asia Pacific Conference on Contemporary Research (APCCR 2015), 3-4 Oct 2015, Kuala Lumpur, Malaysia.

Alajmi, Rashed (2015) Study on sisal fibres as insulator in building materials. [USQ Project]

Alehossein, Habib (2015) Modelling cohesive, frictional and viscoplastic materials. In: 13th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM 2015), 23-29 Sept 2015, Rhodes, Greece.

Abousnina, Rajab M. and Manalo, Allan and Lokuge, Weena (2015) Mechanical properties of mortar with oil contaminated sand. In: 27th Biennial National Conference of the Concrete Institute of Australia (Concrete 2015) in conjunction with the 69th RILEM Week: Construction Innovations, Research into Practice, 30 Aug - 2 Sept 2015, Melbourne, Australia.

Al Juboori, Raed A. and Yusaf, Talal and Aravinthan, Vasantha (2015) Evaluating the impact of operating parameters on biocidal effects of pulsed ultrasound in natural water disinfection. Journal of Biotechnology, 208 (Supplement). S17-S18. ISSN 0168-1656

Al-Juboori, Raed A. and Yusaf, Talal and Bowtell, Leslie (2015) Energy conversion efficiency of pulsed ultrasound. In: The 7th International Conference on Applied Energy – ICAE2015.

Abeysekera, Vasantha and Shelke, Mayur G. (2015) Construction as biological cells: can construction cells be similar to biological cells? In: 8th International Conference on Construction in the 21st Century: Changing the Field: Recent Developments for the Future of Engineering and Construction (CITC-8), 27-30 May 2015, Thessaloniki, Greece.

Abeysekera, Vasantha and Shelke, Mayur G. (2015) Construction as biological cells: implications of the biological cell cycle for managing construction. In: 8th International Conference on Construction in the 21st Century: Changing the Field: Recent Developments for the Future of Engineering and Construction (CITC-8), 27-30 May 2015, Thessaloniki, Greece.

Abeysekera, Vasantha and Abeysekera, Ashoka (2015) Sowing the seeds of success: the provision of a personalised study time management plan. In: 8th International Conference on Construction in the 21st Century: Changing the Field: Recent Developments for the Future of Engineering and Construction (CITC-8), 27-30 May 2015, Thessaloniki, Greece.

Abeysekera, Vasantha (2015) Wither monetary retentions for subcontract work? A theoretical framework for rationalising its use. In: 8th International Conference on Construction in the 21st Century: Changing the Field: Recent Developments for the Future of Engineering and Construction (CITC-8), 27-30 May 2015, Thessaloniki, Greece.

Abousnina, Rajab M. and Nghiem, Long D. and Bundschuh, Jochen (2015) Comparison between oily and coal seam gas produced water with respect to quantity, characteristics and treatment technologies: a review. Desalination and Water Treatment, 54 (7). pp. 1793-1808. ISSN 1944-3994

Al-Juboori, Raed A. and Yusaf, Talal and Bowtell, Leslie and Aravinthan, Vasantha (2015) Energy characterisation of ultrasonic systems for industrial processes. Ultrasonics, 57. pp. 18-30. ISSN 0041-624X

Antille, D. L. and Bennett, J. McL. and Jensen, T. (2015) Soil compaction and controlled traffic considerations in Australian cotton farming systems. Technical Report. University of Southern Queensland , Toowoomba, Australia. [Report]

Abousnina, Rajab M. and Manalo, Allan and Shiau, Jim and Lokuge, Weena (2015) Effects of light crude oil contamination on the physical and mechanical properties of fine sand. Soil and Sediment Contamination, 24 (8). pp. 833-845. ISSN 1532-0383

Al-Juboori, Raed Ahmed Mahmood (2015) Investigating the capability of pulsed ultrasound technology in improving the performance of surface water treatment systems. [Thesis (PhD/Research)]

Abousnina, Rajab M. and Manalo, Allan and Lokuge, Weena and Shiau, Jim (2015) Oil contaminated sand: an emerging and sustainable construction material. In: 2015 International Conference on Sustainable Design, Engineering and Construction, 10-13 May 2015 , Chicago, USA.

Aziz, Naj and Mirzaghorbanali, Ali and Nemcik, Jan and Heeman, Kay and Mayer, Stefan (2015) Shear strength properties of plain and spirally profiled cable bolts. Canadian Geotechnical Journal, 52 (10). pp. 1490-1495. ISSN 0008-3674

Ayers, Ron and Dowling, David and Lind, Gavin (2014) Building long-term capability in the Australian minerals industry – The MINAD project. In: 25th Annual Conference of the Australasian Association for Engineering Education (AAEE 2014): Engineering the Knowledge Economy: Collaboration, Engagement and Employability, 7-10 Dec 2014, Wellington, New Zealand.

Apan, A. and Suarez Cadavid, L. A. and Richardson, L. and Maraseni, T. (2014) Prioritising carbon sequestration areas in southern Queensland using time series MODIS net primary productivity (NPP) imagery. In: Technical Commission 8th Mid-Term Symposium (ISPRS 2014) , 9-12 Dec 2014, Hyderabad, India.

Alehossein, Habib (2014) High-impact engineering education: using the LTI to influence knowledge and skills for sustainable economy. In: 25th Annual Conference of the Australasian Association for Engineering Education (AAEE 2014): Engineering the Knowledge Economy: Collaboration, Engagement and Employability , 8-10 Dec 2014, Wellington, New Zealand.

Abousnina, Rajab M. and Shiau, Jim and Manalo, Allan and Lokuge, Weena (2014) Effect of light hydrocarbons contamination on shear strength of fine sand. In: 4th International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2014), 19-21 Nov 2014, Brisbane, Australia.

Alshadli, Duaa and Newsham-West, Richard and Chong, Albert and Milburn, Peter (2014) A video-based imaging technique for accurate foot measures during different weight bearing conditions. In: 7th International Conference on Biomedical Engineering and Informatics (BMEI 2014), 14-16 Oct 2014, Dalian, China.

Alshadli, Duaa and Chong, Albert and Newsham-West, Richard and Milburn, Peter (2014) Assessing the dynamic foot mobility magnitude using an image-based analysis system. In: 7th International Conference on Biomedical Engineering and Informatics (BMEI 2014), 14-16 Oct 2014, Dalian, China.

Atkinson, Jack Allan (2014) Dam deformation surveys with modern technology. [USQ Project]

Alam, Md Jahangir and Bethune, Matthew and Townsend, Phil and Close, Andy (2014) Modelling water demand and trade on the Murray and lower Darling rivers. In: 17th International River Symposium 2014: Excellence Collaboration Integration, 15-18 Sep 2014, Canberra, Australia.

Aravinthan, Thiru and Kahandawa, Gayan (2014) Investigation of full-scale fibre composite girders for replacement of hardwood timber girders in Australia. In: 7th International Conference on FRP Composites in Civil Engineering (CICE 2014), 20-22 Aug 2014, Vancouver, Canada.

Aravinthan, Thiru (2014) Infrastructure failures and consequences: rehabilitation using fibre composites. In: 1st International Conference on Infrastructure Failures and Consequences (ICIFC 2014), 16-20 Jul 2014, Melbourne, Australia.

Abbas, Mohd Azwan and Lichti, Derek D. and Chong, Albert K. and Setan, Halim and Majid, Zulkepli (2014) An on-site approach for the self-calibration of terrestrial laser scanner. Measurement, 52 (1). pp. 111-123. ISSN 0263-2241

Al-lwayzy, Saddam H. and Yusaf, Talal and Al-Juboori, Raed A. (2014) Biofuels from the fresh water microalgae Chlorella vulgaris (FWM-CV) for diesel engines. Energies, 7 (3). pp. 1829-1851.

Abousnina, Rajab M. and Nghiem, Long D. (2014) Removal of dissolved organics from produced water by forward osmosis. Desalination and Water Treatment, 52 (4-6). pp. 570-579. ISSN 1944-3994

Aravinthan, Vasantha and Harrington, Daniel (2014) Coal seam gas water as a medium to grow Dunalliella Tertiolecta for lipid extraction. Desalination and Water Treatment, 52 (4-6). pp. 947-958. ISSN 1944-3994

Aravinthan, Vasantha and Story, Nadine and Yusaf, Talal (2014) Nutrient removal of nursery and municipal wastewater using Chlorella vulgaris microalgae for lipid extraction. Desalination and Water Treatment, 52 (4-6). pp. 727-736. ISSN 1944-3994

Abbas, M. A. and Setan, H. and Majid, Z. and Chong, A. K. and Lichti, D. D. (2014) Improvement in measurement accuracy for hybrid scanner. In: 8th International Symposium of the Digital Earth (ISDE 2014), 26-29 Aug 2013, Sarawak, Malaysia.

Abbas, Mohd Azwan and Luh, Lau Chong and Setan, Halim and Majid, Zulkepli and Chong, Albert K. and Idris, Khairulnizam M. and Ariff, Mohd Farid Mohd (2014) Investigation of systematic errors for the hybrid and panoramic scanners. Jurnal Teknologi, 71 (4). pp. 65-70. ISSN 0127-9696

Al-lwayzy, Saddam H. (2014) Microalgae biofuels for diesel engines in agricultural applications. [Thesis (PhD/Research)]

Abbas, Mohd Azwan and Luh, Lau Chong and Setan, Halim and Majid, Zulkepli and Chong, Albert K. and Aspuri, Anuar and Idris, Khairulnizam M. and Ariff, Mohd Farid Mohd (2014) Terrestrial laser scanners pre-processing: registration and georeferencing. Jurnal Teknologi, 71 (4). pp. 115-122. ISSN 0127-9696

Al-Nuaimi, Hamdi Abdulkareem Mohammed (2014) The application of variable speed limits to arterial roads for improved traffic flow. [Thesis (PhD/Research)]

Akmalia, R. and Majid, Z. and Setan, H. and Suwardhi, D. and Chong, A. (2014) TLS for generating multi-LOD of 3D building model. In: UNSPECIFIED.

AL-Baghdadi, Jasim Ahmed Ali and Chong, Albert K. and Milburn, Peter and Newsham-West, Richard (2013) Correlating video-captured 3D foot model with foot loading during walking. In: International Conference on Signal and Image Processing Applications (ICSIPA), 8-10 Oct 2013 , Melaka, Malaysia .

Al-Baghdadi, Jasim Ahmed Ali and Chong, Albert K. and Alshadli, Duaa (2013) Compensation of measurement errors caused by glass refraction for photogrammetric plantar surface mapping. Photogrammetric Record , 28 (143). pp. 261-275. ISSN 0031-868X

Al-Baghdadi, Jasim and Chong, Albert and Alshadli, Duaa and Milburn, Peter and Newsham-West, Richard (2013) Plantar surface contour using close range photogrammetry. In: 11th Biennial Footwear Biomechanics Symposium (FBS 2013), 31 Jul-2 Aug 2013, Natal, Brazil.

Alshadli, Duaa and Chong, Albert K. and Newsham-West, Richard and Al-Baghdadi, Jasim Ahmed Ali and Milburn, Peter and McDougall, Kevin (2013) A comparison between static and dynamic foot mobility magnitude measures. In: 31st International Conference on Biomechanics in Sports (ISBS 2013), 7-11 Jul 2013, Taipei, Taiwan.

AL-Baghdadi, Jasim Ahmed Ali and Chong, Albert K. and McDougall, Kevin and Milburn, Peter and Newsham-West, Richard (2013) Human foot plantar surface shape change during gait. In: 31st International Conference on Biomechanics in Sports (ISBS 2013), 7-11 Jul 2013, Taipei, Taiwan.

B

Bennett, J. McL. and Marchuk, A. and Marchuk, S. and Raine, S. R. (2019) Towards predicting the soil-specific threshold electrolyte concentration of soil as a reduction in saturated hydraulic conductivity: the role of clay net negative charge. Geoderma, 337. pp. 122-131. ISSN 0016-7061

Bennett, J. McL. and Roberton, S. D. and Marchuk, S. and Woodhouse, N. P. and Antille, D. L. and Jensen, T. A. and Keller, T. (2019) The soil structural cost of traffic from heavy machinery in vertisols. Soil and Tillage Research, 185. pp. 85-93. ISSN 0167-1987

Benmokrane, Brahim and Nazair, Claude and Loranger, Marc-Antoine and Manalo, Allan (2018) Field durability study of vinyl-ester-based GFRP rebars in concrete bridge barriers. Journal of Bridge Engineering, 23 (12 - Article 0401809). pp. 1-13. ISSN 1084-0702

Basson, Marita and van Rensburg, Henriette and Cuthill, Michael and Erdiaw-Kwasie, Michael O. (2018) Is regional government-governance nexus delivering on social sustainability promises? Empirical evidence from Moranbah in Australia. Local Government Studies. pp. 1-22. ISSN 0300-3930

Basson, Marita and van Rensburg, Henriette and Cuthill, Michael and Erdiaw-Kwasie, Michael O. (2018) Is regional government-governance nexus delivering on social sustainability promises? Empirical evidence from Moranbah in Australia. Local Government Studies, 44 (6). pp. 826-847. ISSN 0300-3930

Banhazi, Thomas and Harmes, Marcus (2018) Development of precision livestock farming technologies. In: Advances in agricultural machinery and technologies. Taylor & Francis (CRC Press), Boca Raton, United States, pp. 179-194. ISBN 978-1-4987-5412-5

Benmokrane, Brahim and Nazair, Claude and Seynave, Xavier and Manalo, Allan (2017) Comparison between ASTM D7205 and CSA S806 tensile-testing methods for glass-fiber-reinforced-polymer bars. Journal of Composites for Construction, 21 (5). pp. 1-13. ISSN 1090-0268

Benmokrane, Brahim and Manalo, Allan and Bouhet, Jean-Charles and Mohamed, Khaled and Robert, Mathieu (2017) Effects of diameter on the durability of glass-fiber-reinforced-polymer (GFRP) bars conditioned in alkaline solution. Journal of Composites for Construction, 21 (5). pp. 1-12. ISSN 1090-0268

Bahri, Nikita (2017) Investigation of methane production by anaerobic co-digestion of food waste, fats, oil & grease, and thickened waste activated sludge using Automatic Methane Potential Test System. [USQ Project]

Bundschuh, Jochen and Chen, Guangnan and Chandrasekharam, D. and Piechocki, Janusz (2017) Geothermal, wind and solar energy applications in agriculture and aquaculture. Sustainable Energy Developments (13). Taylor & Francis (CRC Press), Leiden, Netherlands. ISBN 978-1-138-02970-5

Bundschuh, Jochen and Chen, Guangnan and Tomaszewska, Barbara and Ghaffour, Noreddine and Mushtaq, Shahbaz and Hamawand, Ihsan and Reardon-Smith, Kathryn and Maraseni, Tek and Banhazi, Thomas and Mahmoudi, Hacene and Goosen, Mattheus and Antille, Diogones L. (2017) Solar, wind and geothermal energy applications in agriculture: back to the future? In: Geothermal, wind and solar energy applications in agriculture and aquaculture. Sustainable Energy Developments (13). Taylor & Francis (CRC Press), Leiden, Netherlands, pp. 1-32. ISBN 978-1-138-02970-5

Bein, Vincent Stanley and McDonnell, James and Gibbings, Peter (2017) Effect of time interval on RTK derived distances. Unpublished.

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2017) Durability characteristics and property prediction of glass fibre reinforced mixed plastics composites. Composites Part B: Engineering, 116. pp. 16-29. ISSN 1359-8368

Benmokrane, Brahim and Mohamed, Hamdy M. and Manalo, Allan and Cousin, Patrice (2017) Evaluation of physical and durability characteristics of new headed glass fiber–reinforced polymer bars for concrete structures. Journal of Composites for Construction, 21 (2). pp. 1-12. ISSN 1090-0268

Benmokrane, Brahim and Ali, Ahmed H. and Mohamed, Hamdy M. and El-Safty, Adel and Manalo, Allan (2017) Laboratory assessment and durability performance of vinyl-ester, polyester, and epoxy glass-FRP bars for concrete structures. Composites Part B: Engineering, 114. pp. 163-174. ISSN 1359-8368

Bartimote, Timothy and Quigley, Richard and Bennett, John McL. and Hall, Jake and Brodrick, Rose and Tan, Daniel K. Y. (2017) A comparative study of conventional and controlled traffic in irrigated cotton: II. Economic and physiological analysis. Soil and Tillage Research, 168. pp. 133-142. ISSN 0167-1987

Burnham, Jahnavi (2017) Spatial modelling, analysis and prediction of Hendra disease outbreaks in South East Queensland, Australia. [Thesis (PhD/Research)]

Bennett, J. McL. and Marchuk, A. and Raine, S. R. and Dalzell, S. A. and Macfarlane, D. C. (2016) Managing land application of coal seam water: a field study of land amendment irrigation using saline-sodic and alkaline water on a Red Vertisol. Journal of Environmental Management, 184 (2). pp. 178-185. ISSN 0301-4797

Banerjee, Sourish and Karunasena, Warna and Kist, Alexander A. (2016) Challenges of teaching engineering analysis software to distance education students. In: 27th Annual Conference of the Australasian Association for Engineering Education (AAEE 2016): The Changing Role of the Engineering Educator for Developing the Future Engineer, 4‐7 Dec 2016, Coffs Harbour, Australia.

Boylan, Richard (2016) An evaluation of the performance of two different global satellite navigation systems, Trimble’s CenterPoint RTX and a conventional network RTK system. [USQ Project]

Baker, Trent (2016) Analysis on the behaviour of FRP reinforced concrete railway sleepers. [USQ Project]

Broome, Lachlan (2016) Comparison between terrestrial close range photogrammetry and terrestrial laser scanning. [USQ Project]

Beaumont, Matthew (2016) Pacific highway glenugie: case study of the use of heavy duty granular pavement in northern NSW. [USQ Project]

Bell, Alexander (2016) Stability analysis of shallow undrained tunnel heading using finite element limit analysis. [USQ Project]

Breinl, Anton (2016) UAVs in pipeline design and rehabilitation of construction corridors. [USQ Project]

Brennan, Matthew Aaron (2016) Use of recycled concrete and lime to improve marginal subgrades in the Toowoomba Regional Council. [USQ Project]

Bennett, John McL. and Marchuk, Alla and Marchuk, Serhiy (2016) An alternative index to the exchangeable sodium percentage for an explanation of dispersion occurring in soils. Soil Research, 54 (8). ISSN 1838-675X

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2016) Experimental and theoretical studies on the properties of injection moulded glass fibre reinforced mixed plastics composites. Composites Part A: Applied Science and Manufacturing, 84. pp. 393-405. ISSN 1359-835X

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2016) Characterisation of recycled mixed plastic solid wastes: coupon and full-scale investigation. Waste Management, 48. pp. 72-80. ISSN 0956-053X

Bennett, J. McL. and Jensen, T. A. and Antille, D. L. and Baillie, C. (2016) An impact assessment framework for harvesting technologies in cotton: management considerations for the John Deere 7760. Technical Report. University of Southern Queensland, National Centre for Engineering in Agriculture , Toowoomba, Australia. [Report]

Bennett, John McLean and Marchuk, Serhiy (2016) Thermodynamic modelling and threshold electrolyte concentration analysis for treatment and application of coal seam gas associated water. Technical Report. University of Southern Queensland, National Centre for Engineering in Agriculture , Toowoomba, Australia. [Report]

Bein, Vincent (2015) Effect of time interval variations on RTK derived distances. [USQ Project]

Browne, Michael Charles (2015) Recycled rubber access cover riser. [USQ Project]

Beutel, Amy (2015) Optimal mix design for epoxy resin polymer concrete. [USQ Project]

Braden, Ashleigh (2015) The effect of fibres on the properties of concrete with oil contaminated sand. [USQ Project]

Belbin, Heidi (2015) The use of low-cost photogrammetry techniques to create an accurate model of a human skull. [USQ Project]

Butler, Michael (2015) Asset management framework for NSW local government. [USQ Project]

Bernier, Amy (2015) Use of fibre-optic (FBG) sensors in structural health monitoring – high grade reinforced concrete beams. [USQ Project]

Bennett, J. McL. and Cattle, S. R. and Singh, B. and Quilty, J. R. (2015) Influence of gypsum enhanced chicken-manure-and-wheat-straw compost on amelioration of an irrigated sodic brown vertisol – laboratory experiment. Arid Land Research and Management, 29 (4). pp. 415-431. ISSN 1532-4982

Bennett, J. McL. and Wieck, T. and Dafny, E and Schroeder, B. and Attard, S. (2015) Managing the safe application of sugar by-products to soil: modelling and recommendations. Technical Report. University of Southern Queensland, National Centre for Engineering in Agriculture , Toowoomba, Australia. [Report]

Bennett, J. McL. and Warren, B. R. (2015) Role of livestock effluent suspended particulate in sealing effluent ponds. Journal of Environmental Management, 154. pp. 102-109. ISSN 0301-4797

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2015) Behaviour of new building products from recycled-mixed plastic wastes. In: 12th Composites Australia and CRC-ACS Conference 2015: Game On! Winning with Composites, 21–23 April 2015, Gold Coast, Australia.

Bennett, John McLean (2015) Agricultural big data: utilisation to discover the unknown and instigate practice change. Farm Policy Journal, 12 (1). pp. 43-50. ISSN 1449-2210

Bennett, J. McL. and Cattle, S. R. and Singh, B. (2015) The efficacy of lime, gypsum and their combination to ameliorate sodicity in irrigated cropping soils in the Lachlan Valley of New South Wales. Arid Land Research and Management, 29 (1). pp. 17-40. ISSN 1532-4982

Bennett, John McL. and Woodhouse, Nathan P. and Keller, Thomas and Jensen, Troy A. and Antille, Diogenes L. (2015) Advances in cotton harvesting technology: a review and implications for the John Deere round baler cotton picker. Journal of Cotton Science, 19 (2). pp. 225-249. ISSN 1523-6919

Bajracharya, Rohan Muni (2015) Behaviour of glass fibre reinforced recycled mixed plastic solid waste composites for civil engineering and construction applications. [Thesis (PhD/Research)]

Burnham, Jahnavi and Chong, Albert K. and Liu, Xiaoye and Moore, Antoni (2015) Preliminary spatial analysis of Hendra disease outbreaks in South East Queensland. The Globe (76). pp. 39-45. ISSN 0311-3930

Banerjee, S. and Lee, J. H. and Kuila, T. and Kim, N. H. (2015) Synthesis of graphene-based polymeric nanocomposites. In: Fillers and reinforcements for advanced nanocomposites. Woodhead Publishing Series in Composites Science and Engineering: (60). Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 133-155. ISBN 978-0-08-100079-3

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2014) Effect of elevated temperature on the tensile properties of recycled mixed plastic waste. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 09-12 Dec 2014, Byron Bay, Australia.

Bajracharya, Rohan M. and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2014) Glass fibre and recycled mixed plastic wastes: recent developments and applications. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 09-12 Dec 2014, Byron Bay, Australia.

Bolt, J. R. and Zhuge, Y. and Bullen, F. (2014) The impact of photocatalytic on degradation of poly aromatic hydrocarbons through permeable concrete. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 23), 9-12 Dec 2014, Byron Bay, Australia.

Bundschuh, Jochen and Maity, Jyoyi Prakash (2014) Geothermal arsenic: occurrence, mobility and environmental implications. Renewable and Sustainable Energy Reviews, 42. pp. 1214-1222. ISSN 1364-0321

Blyth, Mitchell (2014) Investigation into sub five minute time of concentration in urban drainage design. [USQ Project]

Boully, Jacinda (2014) An analysis of human behaviour which can cause fatalities in the bus and train tunnel during a tunnel fire event. [USQ Project]

Baxter, Melissa Hope (2014) An energy and carbon audit of Mornington Peninsula Shire Council. [USQ Project]

Brits, Chane (2014) Developing a numerical model for the design of sheet pile walls. [USQ Project]

Bradford, Thomas J. (2014) Low-cost eye tracker. [USQ Project]

Byrd, B. (2014) Using desktop hydrologic data to predict fish presence in streams in northern British Columbia. [USQ Project]

Burnham, Jahnavi (2014) Crime analysis mapping in the UK: a GIS analysis of burglaries in Leicestershire. In: 42nd Australian and New Zealand Map Society Conference (GeoCart 2014): Cartographic Journaeys through Space and Time, 3-5 Sep 2014, Auckland, New Zealand.

Bajracharya, Rohan Muni and Manalo, Allan and Karunasena, Karu and Lau, Kin-tak (2014) Glass-fibre reinforced recycled mixed plastics (GMP): totally recyclable and renewable composites. In: IEEE Australia and New Zealand Student and Young Professional Congress (ANZSCON 2014), 3-5 Jul 2014, Brisbane, Australia.

Bennett, J. McL. and Jensen, T. A. and Antille, D. and Woodhouse, N. (2014) Understanding the JD7760 round module picker impacts. In: 17th Australian Cotton Conference (ACC 2014): Our Fibre, Our Focus, Our Future, 5-7 Aug 2014, Gold Coast, Australia.

Bennett, J. McL. and Melland, A. R. and Eberhard, J. E. (2014) Assessing soil properties of rehabilitated grazing pastures for sustainable and economically viable beef cattle operations: progress report. Project Report. University of Southern Queensland , Toowoomba, Australia. [Report]

Banerjee, Sourish (2014) On the mechanical properties of hierarchical lattices. Mechanics of Materials, 72. pp. 19-32. ISSN 0167-6636

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2014) Tensile properties of glass fibre reinforced recycled mixed plastic composites. In: Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World, 7–9 Apr 2014, Newcastle, Australia.

Bundschuh, Jochen and Chen, Guangnan and Mushtaq, Shahbaz (2014) Towards a sustainable energy technologies based agriculture. In: Sustainable energy solutions in agriculture: sustainable energy developments. Sustainable Energy Developments, 8. Taylor & Francis (CRC Press), London, United Kingdom, pp. 3-15. ISBN 978-1-1380-0118-3

Beecham, Simon and Rashid, Mamunur and Chowdhury, Rezaul K. (2014) Statistical downscaling of multi-site daily rainfall in a South Australian catchment using a Generalized Linear Model. International Journal of Climatology, 34 (14). pp. 3654-3670. ISSN 0899-8418

Brown, Kerry and Laue, Martin and Tafur, Javier and Mahmood, Muhammad Nateque and Scherrer, Pascal and Keast, Robyn (2014) An integrated approach to strategic asset management. In: Infranomics: sustainability, engineering design and governance. Topics in Safety, Risk, Reliability and Quality , 24. Springer International Publishing, Switzerland, pp. 57-74. ISBN 978-3-319-02492-9

Basir, W. N. F. W. A. and Setan, Halim and Majid, Zulkepli and Chong, Albert K. (2014) Geospatial database for heritage building conservation. IOP Conference Series: Earth and Environmental Science, 18 (2014). pp. 1-6. ISSN 1755-1315

Bennett, J. McL. and Greene, R. S. B. and Murphy, B. W. and Hocking, P. and Tongway, D. (2014) Influence of lime and gypsum on long-term rehabilitation of a Red Sodosol, in a semi-arid environment of New South Wales. Soil Research, 52 (2). pp. 120-128. ISSN 1838-675X

Basnet, Badri (2013) Cognitive dissonance in student self-assessment. In: 24th Annual Conference of the Australasian Association for Engineering Education (AaeE 2013): Work Integrated Learning-Applying Theory to Practice in Engineering Education, 8-11 Dec 2013, Gold Coast, Australia.

Bennett, J. McL. and Antille, D. L. and Raine, S. R. (2013) Technological and integrated approaches for practical and rapid assessment of compaction in agricultural soils: a review. Discussion Paper. University of Southern Queensland , Toowoomba, Australia. [Report]

Bowles, Yvonne Elizabeth (2013) A consistent approach to headlight screens in NSW. [USQ Project]

Bell, Mitchell (2013) Accuracy of a machine guided grader. [USQ Project]

Brailsford, Steven (2013) Cathodic protection of reinforced concrete bridges in the marine environment as an asset management tool. [USQ Project]

Burke, Maxwell James (2013) LiDAR data for DEM generation and flood plain mapping. [USQ Project]

Blyth, James Ian (2013) Optimising earth dam design in seasonal freeze-thaw climates. [USQ Project]

Basson, Marita and Dowling, David (2013) What do planners do? Define your discipline to drive undergraduate curriculum renewal. In: 49th World Congress of the International Society of City and Regional Planners (ISOCARP 2013): Frontiers of Planning: Evolving and Declining Models of City Planning Practice, 1-4 Oct 2013, Brisbane, Australia.

Brodie, Ian (2013) Using volume delivery time to identify independent partial series events. Water Resources Management, 27 (10). pp. 3727-3738. ISSN 0920-4741

Brodie, Ian and Brodie, Lyn (2013) System engineering the engineering education process: a gap analysis. In: 5th International Symposium on Project Approaches in Engineering Education (PAEE 2013): Closing the Gap between University and Industry, 8-9 Jul 2013, Eindhoven, Netherlands.

C

Chowdhury, Rezaul and Abaya, Jameelu S. and Tsiksi, Taoufik and Mohamed, Mohamed M. A. (2018) Removal of heavy metals in vegetative graywater biofiltration columns. Journal of Environmental Engineering, 144 (11-Article 04018112). ISSN 0733-9372

Campbell, Glenn (2018) Calculating positional and survey uncertainty for terrestrial observations. In: SSSI Northern Group Technical Seminar 2018, 4-5 May 2018, Bowen.

Chen, Guangnan (2018) Advances in agricultural machinery and technologies. Taylor & Francis (CRC Press), Boca Raton, Florida, United States. ISBN 978-1-4987-5412-5

Chen, Zhen and Chan, Tommy H. T. and Nguyen, Andy (2018) Moving force identification based on modified preconditioned conjugate gradient method. Journal of Sound and Vibration, 423 (2018). pp. 100-117. ISSN 0022-460X

Chowdhury, Rezaul K and Abaya, Jameelu S. (2018) An experimental study of greywater irrigated green roof systems in an arid climate. Journal of Water Management Modeling, 26 (C437). pp. 1-10. ISSN 2292-6062

Chan, Chi Shing (2018) An evaluation of cement manufacture options for sustainable infrastructure. [Thesis (PhD/Research)]

Chowdhury, Rezaul K. and Abaya, Jameelu S. and Tsiksi, Taoufik and Mohamed, Mohamad M. (2017) Greywater quality changes in laboratory scale vegetative biofiltration prototypes. Journal of Water Management Modeling, 26 (C434). pp. 1-7.

Castillo, Jose Alan A. and Apan, Armando A. and Maraseni, Tek N. and Salmo, Severino G., III (2017) Estimation and mapping of above-ground biomass of mangrove forests and their replacement land uses in the Philippines using Sentinel imagery. ISPRS Journal of Photogrammetry and Remote Sensing, 134. pp. 70-85. ISSN 0924-2716

Castillo, Jose Alan A. and Apan, Armando A. and Maraseni, Tek N. and Salmo, Severino G., III (2017) Soil greenhouse gas fluxes in tropical mangrove forests and in land uses on deforested mangrove lands. Catena, 159. pp. 60-69. ISSN 0341-8162

Chowdhury, R. and Maraqa, M. and Mauga, T. and Albuquerque, D. and Alzard, M. and Khan, Q. (2017) Assessing the carbon footprint of road projects and related sustainability initiatives in Abu Dhabi - technical report II: carbon footprint from road life cycle and development of a framework for carbon footprint calculation of road in the city of Abu Dhabi. Technical Report. Abu Dhabi City Municipality , United Arab Emirates. [Report]

Chen, Guangnan and Schmidt, Erik and Maraseni, Tek and Bundschuh, Jochen and Banhazi, Thomas and Antille, Diogones L. (2017) Opportunities of adopting renewable energy for the nursery industry in Australia. In: Geothermal, wind and solar energy applications in agriculture and aquaculture. Sustainable Energy Developments (13). Taylor & Francis (CRC Press), Leiden, Netherlands, pp. 115-126. ISBN 978-1-138-02970-5

Castillo, Jose Alan A. and Apan, Armando A. and Maraseni, Tek Narayan and Salmo, Severino G., III (2017) Soil C quantities of mangrove forests, their competing land uses, and their spatial distribution in the coast of Honda Bay, Philippines. Geoderma, 293. pp. 82-90. ISSN 0016-7061

Chong, Albert K. (2017) A new plantar axis for longitudinal study of gait characteristics. In: 9th International Congress on Image and Signal Processing, BioMedical Engineering and Informatics (CISP-BMEI, 2016) , 15-17 Oct 2016, Datong, China .

Chowdhury, R. K. and Rajput, M. A. (2017) Will greywater reuse really affect the sewer flow? Experience of a residential complex in Al Ain, UAE. Water Science and Technology: Water Supply, 17 (1). pp. 246-258. ISSN 1606-9749

Castillo, Jose Alan A. (2017) Assessing and mapping of carbon in biomass and soil of mangrove forest and competing land uses in the Philippines. [Thesis (PhD/Research)]

Chowdhury, R. K. and Rajput, M. A. (2016) Leakage and failures of water distribution mains in the city of Al Ain, UAE. Water Practice and Technology, 11 (4). pp. 806-814.

Carson, Bradley (2016) Analysis of wall formwork in the Australian multi-storey construction industry. [USQ Project]

Cuckson, Christopher (2016) Effectiveness of the Wide Centreline Treatment on two-way rural roads. [USQ Project]

Cuell, Jonathan (2016) Effects of on-site detention systems on urban drainage catchments. [USQ Project]

Collins, Matthew (2016) Identification of the spectral signature of noxious weed St. John’s wort and development of a tracking methodology via remote sensing. [USQ Project]

Cherry, Rebecca (2016) Investigation of road wearing surface systems for glue laminated softwood timber bridge decks. [USQ Project]

Chou Pei-Chen, Peggy (2016) Investigation of scour mitigation methods for critical road structures. [USQ Project]

Cohen, Jethro (2016) Review of timber bridge maintenance practices on Queensland state controlled road networks. [USQ Project]

Costello, Brad (2016) Underground check survey. [USQ Project]

Chowdhury, Rezaul and Mohamed, Mohamad M. A. and Murad, Ahmed (2016) Variability of extreme hydro-climate parameters in the north-eastern region of United Arab Emirates. Procedia Engineering, 154 (2016). pp. 639-644. ISSN 1877-7058

Chong, Albert K. (2016) A new plantar surface reference system for pressure study. In: 8th International Conference on Digital Image Processing (ICDIP 2016), 20-23 May 2016, Chengu, China.

Chowdhury, Rezaul K. and Sharvelle, Sybil E. and Beecham, Simon (2016) Greywater quality changes in a permeable pavement reservoir. Proceedings of the Institution of Civil Engineers - Water Management, 169 (4). pp. 190-198. ISSN 1741-7589

Chowdhury, Rezaul and Ksiksi, Taoufik and Mohamed, Mohamad M. A. and Abaya, Jameelu (2016) Performance of vegetative bioretention system for greywater reuse in the arid climates. In: 8th International Conference on Environmental Science and Technology, 6-10 June 2016, Houston, United States of America.

Chowdhury, R. and Maraqa, M. and Mauga, T. and Alzard, M. (2016) Assessing the carbon footprint of road projects and related sustainability initiatives in Abu Dhabi - technical report I: literature review. Technical Report. UNSPECIFIED . [Report]

Chowdhury, R. K. (2016) Learning and teaching style assessment for improving project-based learning of engineering students: a case of United Arab Emirates University. Australasian Journal of Engineering Education, 20 (1). pp. 81-94. ISSN 2205-4952

Chong, Albert K. and Mei, Qichang (2016) A foot axis for COP path of older adult short access-ramp walking study. In: 34th International Conference on Biomechanics in Sports (ISBS 2016), 18-22 July 2016, Tsukuba, Japan.

Chowdhury, Rezaul K. (2015) Greywater reuse through a bioretention system prototype in the arid region. Water Science and Technology, 72 (12). pp. 2201-2211. ISSN 0273-1223

Craig, Ian P. and Bundschuh, Jochen and Thorpe, David (2015) Pesticide sustainable management practice (SMP) including porous biochar/geopolymer structures for contaminated water remediation. International Journal of GEOMATE, 9 (18). pp. 1523-1527. ISSN 2186-2982

Chen, Guangnan and Sandell, Gary and Baillie, Craig (2015) Reducing energy use and costs in agriculture. Global Journal of Energy Technology Research Updates, 2 (2). pp. 33-38.

Chowdhury, R. K. and Rajput, M. A. (2015) Water consumption pattern in the traditional villas of Abu Dhabi. In: 21st International Congress on Modelling and Simulation (MODSIM 2015), 29 Nov - 4 Dec 2015, Gold Coast, Australia.

Couch, Greg (2015) Key infrastructure review (Newcastle, NSW) vulnerability to a Tsunami. [USQ Project]

Cook, Garth Anthony (2015) On-site detention methods & the cumulative effect. [USQ Project]

Cormick, Adam (2015) Comparing different heating methods for determination of moisture content in soils. [USQ Project]

Collier, Shane Michael (2015) Finite element analysis of a hybrid natural fibre sandwich wall panel loaded with in-plane shear. [USQ Project]

Cummings, Shane (2015) Modelling the behaviour of floodways subjected to flood loadings. [USQ Project]

Connell, David John (2015) Production of semi-real time media-GIS contents of natural disasters using MODIS satellite data. [USQ Project]

Cox, Raymond (2015) Real-world comparisons between target-based and targetless point-cloud registration in FARO Scene, Trimble RealWorks and Autodesk Recap. [USQ Project]

Coverdale, Constance (2015) Soil nitrogen supply rates during a cotton season. [USQ Project]

Chong, Albert K. and Al-Baghdadi, Jasim Ahmed Ali and Milburn, Peter (2015) Analysis of plantar surface data during the loaded phase of gait on inclined surfaces. In: 33rd International Conference on Biomechanics in Sports (ISBS 2015), 29 June - 3 July 2015, Poitiers, France.

Chen, Guangnan and Maraseni, Tek and Bundschuh, Jochen and Zare, Dariush (2015) Agriculture: alternative energy sources. In: Encyclopedia of energy engineering and technology, 2nd ed. Encyclopedia of Energy Engineering and Technology, Second Edition - Four Volume Set , Volume 1. Taylor & Francis, United States, pp. 1-6. ISBN 1-4665-0673-3

Chowdhury, Rezaul K. and Beecham, Simon and Boland, John and Piantadosi, Julia (2015) Understanding South Australian rainfall trends and step changes. International Journal of Climatology, 35 (3). pp. 348-360. ISSN 0899-8418

Chong, Albert K. and Al-Baghdadi, Jasim Ahmed Ali and Milburn, Peter B. (2015) The effect of fixing kinesiology tape onto the plantar surface during the loading phase of gait. In: 17th International Conference on Biomechanics and Biomedical Engineering (ICBBE 2015), 12-13 Feb 2015, Kuala Lumpur, Malaysia.

Chowdhury, Rezaul K. and El-Shorbagy, Walid and Ghanma, Mwafag and El-Ashkar, Assem (2015) Quantitative assessment of residential water end uses and greywater generation in the City of Al Ain. Water Science and Technology: Water Supply, 15 (1). pp. 114-123. ISSN 1606-9749

Chong, Albert K. and Al-Baghdadi, Jasim Ahmed and Milburn, Peter (2015) Matching 3D plantar model with the force and pressure data of the loading phase of gait. In: 7th International Congress on Image and Signal Processing (CISP 2014), 14-16 Oct 2014, Dalian, China.

Chowdhury, Rezaul K. (2015) Potential and challenges of project-based learning in engineering education at the United Arab Emirates University. In: Advances in engineering education in the Middle East and North Africa: current status and future insights. Springer International Publishing, Switzerland, pp. 323-342. ISBN 978-3-319-15322-3

Chen, Guangnan and Maraseni, Tek and Banhazi, Thomas and Bundschuh, Jochen (2015) On-farm energy use in the dairy industries. In: 1st Australian Life Cycle Assessment Conference 2015 (AgriFoodLCA): Growth Through Sustainability, 23-24 Nov 2015, Melbourne, Australia .

Chen, Guangnan and Maraseni, Tek and Banhazi, Thomas and Bundschuh, Jochen (2015) On-farm energy use in the grain and horticultural industries. In: 1st Australian Life Cycle Assessment Conference 2015 (AgriFoodLCA): Growth Through Sustainability, 23-24 Nov 2015, Melbourne, Australia.

Chen, S. and Zhuge, Yan and Lu, G. X. and Eising, D. R. (2014) Flexural behavior of basalt fibre reinforced ferrocement composite. In: 23rd Australiasian Conference on the Mechanics of Structures and Materials (ACMSM 23), 9-12 Dec 2014, Byron Bay, Australia.

Chowdhury, Rezaul K. (2014) Outcomes of blending project-based and traditional lecture-based teaching approaches in engineering education at the United Arab Emirates University. In: 25th Annual Conference of the Australasian Association for Engineering Education (AAEE 2014): Engineering the Knowledge Economy: Collaboration, Engagement & Employability , 7-10 Dec 2014, Wellington, New Zealand.

Coburn, Adam John (2014) Laser scanning for forest structure analysis. [USQ Project]

Coburn, Adam John (2014) Laser scanning for forest structure analysis. [USQ Project]

Clayton, Scott (2014) Lateral earth pressure problems involved with cantilever retaining structures and stability of those structures. [USQ Project]

Carey, Tyler (2014) The thermal performance of an earth sheltered shipping container. [USQ Project]

Chowdhury, Rezaul Kabir (2014) Quantitative and qualitative assessment of greywater for water demand management in Al Ain. In: 13th International Conference on Urban Drainage (ICUD) 2014, 7-12 Sept 2014, Sarawak, Malaysia.

Chong, Albert K. and Al-Baghdadi, Jasim Ahmed Ali and Alshadli, Duaa (2014) High definition video cameras for measuring movement of vibrating bridge structure. In: International Conference on Vibration and Vibro-acoustics (ICVV2014), 13-15 Jan 2014, Harbin, China.

Chowdhury, Rezaul K. and Eslamian, Saeid (2014) Climate change and hydrologic modeling. In: Handbook of engineering hydrology: Modeling, climate change, and variability. Handbook of Engineering Hydrology, Book 2. CRC Press, United States, pp. 71-86. ISBN 9781466552463

Chowdhury, Rezaul K. and Eslamian, Saeid (2014) Statistical parameters used for assessing hydrologic regime. In: Handbook of engineering hydrology: Modeling, climate change, and variability. Handbook of Engineering Hydrology, Book 2. CRC Press, United States, pp. 537-551. ISBN 9781466552463

Chowdhury, Rezaul K. and Beecham, Simon (2013) Influence of SOI, DMI and Niño3.4 on South Australian rainfall. Stochastic Environmental Research and Risk Assessment, 27 (8). pp. 1909-1920. ISSN 1436-3240

Chong, Albert K. and AL-Baghdadi, Jasim Ahmed Ali (2013) Accurate videogrammetric data for human limb movement research. In: International Conference on Signal and Image Processing Applications (ICSIPA), 8-10 Oct 2013, Melaka, Malaysia.

Campbell, Glenn (2013) Boundaries and the common law. In: Graduate Surveyors Weekend Seminar 2013, 4-6 Oct 2013, University of Southern Queensland.

Cleaver, Benjamin L. (2013) Evaluation of the performance of web-based GNSS post processing systems. [USQ Project]

Crawford, Peter Alexander (2013) Improving surfing conditions in conjunction with coastal erosion protection. [USQ Project]

Campbell, Eyre (2013) Simulation of sawmill yields at Hyne Tuan Pine Mill. [USQ Project]

Chong, Albert K. and Alshadli, Duaa and AL-Baghdadi, Jasim Ahmed Ali and Milburn, Peter and Newsham-West, Richard (2013) A video-based system for plantar surface acquisition during gait. In: 31st International Conference on Biomechanics in Sports (ISBS 2013), 7-11 Jul 2013, Taipei, Taiwan.

D

Dhakal, Subas P. and Mahmood, Muhammad N. and Bogati, Ramji (2018) Bridging the energy access divide for sustainable development in South Asia: Policies and prospects in Nepal. International Journal of Public Policy, 14 (1/2). pp. 104-119. ISSN 1740-0600

Dang, Aaditi (2018) Soil-specific strategic irrigation: saline-sodic water as an irrigation resource. [Thesis (PhD/Research)]

Davis, Aaron (2016) A civil engineering feasibility study on a sustainable pumped hydroelectricity plant at Wivenhoe. [USQ Project]

Dhakal, Bibek (2016) A trade-based approach for defects management in residential construction. [USQ Project]

Dong, Jianghui and Zhuge, Yan and Mills, Julie E. and Ma, Xing (2016) Local buckling of profiled skin sheets resting on tensionless elastic foundation under in-plane shear loading. European Journal of Mechanics A: Solids, 58 (July-August). pp. 131-139. ISSN 0997-7538

Dong, Jianghui and Zhuge, Yan and Mills, Julie E. and Ma, Xing (2016) Local buckling of profiled skin sheets resting on tensionless elastic foundations under uniaxial compression. Thin-Walled Structures, 103. pp. 81-89. ISSN 0263-8231

Dowling, David (2016) Employing STEM graduates: identifying collaboration capabilities wanted by employers. In: The STEM ecosystem: building cross-disciplinary leadership capacity in science, technology, engineering and mathematics. Gaby Chapman, The Writing Bureau, Melbourne, pp. 113-126. ISBN 978-0-646-95295-6

Dang, Aaditi and Silburn, Mark and Craig, Ian and Shaw, Melanie and Foley, Jenny (2016) Washoff of residual photosystem II herbicides from sugar cane trash under a rainfall simulator. Journal of Agricultural and Food Chemistry, 64 (20). pp. 3967-3974. ISSN 0021-8561

Devine, Josephine Maria (2016) An analysis of socio-cultural congruence and its impact on diverse student cohorts in an engineering context. [Thesis (PhD/Research)]

Deng, Xiaoli and Gharineiat, Zahra and Andersen, Ole B. and Stewart, Mark G. (2016) Observing and modelling the high water level from satellite radar altimetry during tropical cyclones. In: Proceedings of the 2013 IAG Scientific Assembly, Postdam, Germany, 1–6 September, 2013, 1–6 September, 2013, Postdam, Germany.

Diffin, Luke (2015) Own identification of contributing factors for the success of toll roads in Australia under Public Private Partnerships. [USQ Project]

Dafny, Elad and Tawfeeq, Kochar Jamal and Ghabraie, Kazem (2015) Evaluating temporal changes in hydraulic conductivities near karst-terrain dams: Dokan Dam (Kurdistan-Iraq). Journal of Hydrology, 529 (Part 1). pp. 265-275. ISSN 0022-1694

Davey, Wade (2015) Evaluating the effectiveness of Intelligent Transport Systems at reducing speeds through roadwork sites in Australia. [USQ Project]

Dafny, Elad (2015) Annual entitlement for the Condamine floodplain irrigators – is it really working? In: 2nd Australian Cotton Research Conference 2015: Science Securing Cotton's Future, 8-10 Sept 2015, Toowoomba, Australia.

Dafny, Elad (2015) Recharge processes at the St George Irrigation Area. In: 2nd Australian Cotton Research Conference 2015: Science Securing Cotton's Future, 8-10 Sept 2015, Toowoomba, Australia.

Dafny, Elad (2015) Assessing health risks for the Darling Downs rural sector due to consumption of potentially impaired (Herbicides) drinking water - Executive report. Project Report. University of Southern Queensland, National Centre for Engineering in Agriculture , Toowoomba, Australia. [Report]

Dowling, David and Rose, Samantha and O'Shea, Eidin (2015) Reconsidering humanities programmes in Australian universities - embedding a new approach to strengthen the employability of humanities graduates by empowering them as 'global citizens'. Social Alternatives, 34 (2). pp. 52-62. ISSN 0155-0306

Dunwoody, John Ernest (2015) Scaling effects on landscape function analysis of rangelands using remotely sensed imagery. [Thesis (PhD/Research)]

Dhakal, Subas P. and Mahmood, Muhammad N. and Wiewiora, Anna and Brown, Kerry and Keast, Robyn (2015) Stakeholder engagement and asset management: a case study of the Gold Coast Airport, Queensland. In: 7th World Congress on Engineering Asset Management: Towards Integration and Interoperability (WCEAM 2012), 8-9 Oct 2012, Daejeon City, Korea.

Dowling, David (2014) Ten years on: An evaluation of the success of the Master of Engineering Practice program. In: 25th Annual Conference of the Australasian Association for Engineering Education: Engineering the Knowledge Economy: Collaboration, Engagement & Employability , 7-10 Dec 2014, Wellington, New Zealand.

Darton, Alex (2014) Quantification of the measurement error associated with in situ measurements of water absorption and attenuation using the AC-9 instrument. [USQ Project]

Dudman, Benjamin (2014) Aquaplaning assessment and mitigation in flat terrains. [USQ Project]

Dhakal, Subas P. and Mahmood, Muhammad N. (2014) International aid and cyclone shelters in Bangladesh: adaptation or maladaptation? Contemporary South Asia, 22 (3). pp. 290-304. ISSN 0958-4935

Dhakal, Subas P. and Mahmood, Muhammad N. and Wiewiora, Anna and Brown, Kerry and Keast, Robyn (2013) The innovation potential of living-labs to strengthen small and medium enterprises in regional Australia. Australasian Journal of Regional Studies, 19 (3). pp. 456-474. ISSN 1324-0935

Dinsmore, Robert Colin (2013) Investigating the impact of the Request For Information process in construction. [USQ Project]

Dann, William (2013) Investigation into traffic controller health and safety at road works in Queensland. [USQ Project]

Dillon, Megan (2013) Little streets in small cities: the role of laneway activation in regional Queensland CBD revitalisation. [USQ Project]

Dowling, David G. (2013) Enhancing student communication skills: the development of the PCR communication model for engineers. In: 41st Annual Engineering Education Conference(SEFI 2013): Engineering Education Fast Forward 1973-2013 , 16-20 Sep 2013 , Leuven, Belgium.

Dhakal, Subas P. and Mahmood, Nateque M. (2013) Climate change adaptation and disaster risk reduction strategies in Bangladesh: The tale of two coastal cities. In: People and the Planet 2013 Conference: Transforming the Future, 2-4 Jul 2013, Melbourne, Australia.

E

Evans, Michael (2016) Species distribution modelling of the Glossy Black Cockatoo in Queensland’s Condamine region. [USQ Project]

Eaton, John (2015) Investigations into the effect of contaminants on permeable concrete effectiveness during its life cycle. [USQ Project]

Evans, Jesse Troy (2015) Evaluation of photogrammetric measurements obtained using imaging rovers and imaging theodoli. [USQ Project]

Epselis, Jonathan (2015) Investigation of the relationship between speed and separation width for head-on crashes in New South Wales. [USQ Project]

Espada Jr., Rodolfo and Apan, Armando and McDougall, Kevin (2015) Vulnerability assessment and interdependency analysis of critical infrastructures for climate adaptation and flood mitigation. International Journal of Disaster Resilience in the Built Environment, 6 (3). pp. 313-346. ISSN 1759-5908

Espada Jr., Rodolfo and Apan, Armando and McDougall, Kevin (2014) Spatial modelling of natural disaster risk reduction policies with Markov decision processes. Applied Geography, 53. pp. 284-298. ISSN 0143-6228

Espada Jr., R. and Apan, A. and McDougall, K. (2013) Using spatial modelling to develop flood risk and climate adaptation capacity metrics for assessing urban community and critical electricity infrastructure vulnerability. In: 20th International Congress on Modelling and Simulation (MODSIM 2013): Adapting to Change: The Multiple Roles of Modelling , 1-6 Dec 2013, Adelaide, Australia.

Eaton, Timothy (2013) Exploring the application of closed form solutions in geotechnical problems. [USQ Project]

Espada Jr., Rodolfo and Apan, Armando and McDougall, Kevin (2013) Using spatial modelling to develop flood risk and climate adaptation capacity metrics for vulnerability assessments of urban community and critical water supply infrastructure. In: 49th World Congress of the International Society of City and Regional Planners (ISOCARP 2013): Frontiers of Planning: Evolving and Declining Models of City Planning Practice , 1-4 Oct 2013, Brisbane, Australia.

El Saliby, Ibrahim and Erdei, Laszlo and Kim, Jong-Ho and Shon, Ho Kyong (2013) Adsorption and photocatalytic degradation of methylene blue over hydrogen-titanate nanofibres produced by a peroxide method. Water Research, 47 (12). pp. 4115-4125. ISSN 0043-1354

F

Ferdous, Wahid and Bai, Yu and Almutairi, Ahmed D. and Satasivam, Sindu and Jeske, Juri (2018) Modular assembly of water-retaining walls using GFRP hollow profiles: Components and connection performance. Composite Structures, 194. pp. 1-11. ISSN 0263-8223

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru and Fam, Amir (2018) Flexural and shear behaviour of layered sandwich beams. Construction and Building Materials, 173. pp. 429-442. ISSN 0950-0618

Ferdous, Wahid and Manalo, Allan and Van Erp, Gerard and Aravinthan, Thiru and Ghabraie, Kazem (2018) Evaluation of an innovative composite railway sleeper for a narrow-gauge track under static load. Journal of Composites for Construction, 22 (2). pp. 1-13. ISSN 1090-0268

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru (2017) Effect of beam orientation on the static behaviour of phenolic core sandwich composites with different shear span-to-depth ratios. Composite Structures, 168. pp. 292-304. ISSN 0263-8223

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru (2017) Behaviour of composite sandwich beams with different shear span-to-depth ratios. In: 24th Australasian Conference on the Mechanics of Structures and Materials: Advancements and Challenges (ACMSM24), 6-9 Dec 2016, Perth, Australia.

Ferdous, Wahid (2017) Behaviour of composite sandwich panels bonded with epoxy polymer matrix for railway sleepers. [Thesis (PhD/Research)]

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru (2017) Bond behaviour of composite sandwich panel and epoxy polymer matrix: Taguchi design of experiments and theoretical predictions. Construction and Building Materials, 145. pp. 76-87. ISSN 0950-0618

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru and Van Erp, Gerard (2016) Properties of epoxy polymer concrete matrix: Effect of resin-to-filler ratio and determination of optimal mix for composite railway sleepers. Construction and Building Materials, 124. pp. 287-300. ISSN 0950-0618

Farahbakhsh, Iman (2016) Finite element modelling of a sustainable hybrid natural fibre sandwich panel under bending. [USQ Project]

Freeman, Belinda (2016) Future public transport options for Toowoomba for the next twenty years. [USQ Project]

Fraser, Andrew (2016) Study of blast effects on structures. [USQ Project]

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru and Remennikov, Alex (2016) Recent developments and applications of composite railway sleepers. In: Conference on Railway Excellence (CORE) 2016, 16-18 May 2016, Melbourne, Australia.

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru (2016) Bond behaviour of composite sandwich panel and epoxy polymer matrix. In: 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2016), 14 - 16 Dec 2016, Hong Kong, CHina.

Fajrin, Jauhar and Zhuge, Yan (2015) Flexural behaviour of a sustainable hybrid composite panel using natural fibres. In: The 12th International Symposium on Fibre Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & The 5th Asia-Pacific Conference on Fibre Reinforced Polymers in Structures (APFIS-2015), 14-16 Dec 2015, Nanjing, China.

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru and Van Erp, Gerard (2015) Optimal polymer matrix coating for composite railway sleeper – analytic hierarchy process. In: Joint conference of the 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & the 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015), 14-16 Dec 2015, Nanjing, China.

Fitzgerald, Samuel Jesse (2015) An assessment of rural road network resilience as a critical infrastructure for coal seam gas development in regional Queensland. [USQ Project]

Fairley, Melissa (2015) Investigation of seepage in water supply distribution channels in St George, Queensland. [USQ Project]

Fleming, Desmond James (2015) Object-oriented image analysis of cotton cropping areas in the Macintyre Valley using satellite imagery. [USQ Project]

Ford, Joseph (2015) Effect of environmental surroundings on accuracy and precision of total station measurements. [USQ Project]

Farrugia, Daniel (2015) Evaluation of signalised intersections in NSW with right turn filters. [USQ Project]

Flannery, Aiden Michael (2015) Thermally insulated structural sandwich panels for roofing applications. [USQ Project]

Fraser, Carl (2015) Vulnerability of bridges in extreme flood events based on element failure. [USQ Project]

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru and Van Erp, Gerard (2015) Effect of ultraviolet radiation on the physical and mechanical properties of polymer matrix. In: 27th Biennial National Conference of the Concrete Institute of Australia (Concrete 2015) in conjunction with the 69th RILEM Week: Construction Innovations, Research into Practice, 30 Aug – 2 Sept 2015, Melbourne, Australia.

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru and Van Erp, Gerard (2015) Thermo-mechanical behaviour of epoxy based polymer matrix. In: 27th Biennial National Conference of the Concrete Institute of Australia (Concrete 2015) in conjunction with the 69th RILEM Week: Construction Innovations, Research into Practice, 30 Aug – 2 Sept 2015, Melbourne, Australia.

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2015) Improving the quality of experimental research in civil engineering by employing statistical design of experiment: a case study in developing composite hybrid sandwich panel. In: 14th International conference on QIR (Quality in Research), 10-13 Aug 2015, Lombok, Indonesia .

Ferdous, Wahid and Aravinthan, Thiru and Manalo, Allan and Van Erp, Gerard (2015) Composite railway sleepers: new developments and opportunities. In: 11th International Heavy Haul Association Conference: Operational Excellence (IHHA 2015), 21-24 June 2015, Perth, Australia.

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru and Van Erp, Gerard (2015) Structural performance of heavy duty composite railway sleeper. In: 11th International Heavy Haul Association Conference: Operational Excellence (IHHA 2015), 21-24 June 2015, Perth, Australia.

Ferdous, Wahid and Manalo, Allan and Khennane, Amar and Kayali, Obada (2015) Geopolymer concrete-filled pultruded composite beams: concrete mix design and application. Cement and Concrete Composites, 58. pp. 1-13. ISSN 0958-9465

Ferdous, Wahid and Manalo, Allan and Van Erp, Gerard and Aravinthan, Thiru and Kaewunruen, Sakdirat and Remennikov, Alex (2015) Composite railway sleepers – recent developments, challenges and future prospects. Composite Structures, 134. pp. 158-168. ISSN 0263-8223

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru and Van Erp, Gerard (2014) Design of epoxy resin based polymer concrete matrix for composite railway sleeper. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 9-12 Dec 2014, Byron Bay, Australia.

Ferdous, Wahid (2014) Effect of beam-column joint stiffness on the design of beams. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 9-12 Dec 2014, Byron Bay, Australia.

Fajrin, Jauhar and Zhuge, Yan (2014) Shear capacity of a newly developed sustainable hybrid composite wall panel. In: Workshop on Global Innovations in Infrastructure with Advanced Composites, 30 Oct - 01 Nov 2014, Nanjing, China.

Franks, Chris (2014) Safety and efficiency benefits of implementing zip merge treatments in NSW. [USQ Project]

Ferdous, Wahid and Manalo, Allan (2014) Failures of mainline railway sleepers and suggested remedies – review of current practice. Engineering Failure Analysis, 44. pp. 17-35. ISSN 1350-6307

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru and Remennikov, Alex (2014) Review of failures of railway sleepers and its consequences. In: 1st International Conference on Infrastructure Failures and Consequences (ICFC 2014), 16-20 Jul 2014, Melbourne, Australia.

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru and Van Erp, Gerard (2014) Composite railway sleeper: a cost effective and eco-friendly alternative. In: IEEE Australia and New Zealand Student and Young Professional Congress (ANZSCON 2014), 3-5 Jul 2014, Brisbane, Australia.

Ferdous, Wahid and Manalo, Allan and Khennane, Amar and Kayali, Obada (2014) Benefits of geopolymer concrete-filled FRP beams and its flexural behaviour. In: Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World, 7–9 Apr 2014, Newcastle, Australia.

Ferdous, Wahid and Manalo, Allan and Van Erp, Gerard (2014) Structural optimisation of composite railway sleeper. In: Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World, 7–9 Apr 2014, Newcastle, Australia.

Fajrin, Jauhar (2013) Sustainable hybrid composite sandwich panel with natural fibre composites as intermediate layer. [Thesis (PhD/Research)]

Freeman, Bryan (2013) A preliminary feasibility study for transporting Surat Basin export coal using Maglev technology. [USQ Project]

Fletcher, Wade Daniel (2013) MUSIC model accuracy in predicting stormwater quality. [USQ Project]

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2013) Significance analysis of flexural behaviour of hybrid sandwich panels. Open Journal of Civil Engineering, 3 (3B). pp. 1-7. ISSN 2164-3164

G

Gharineiat, Zahra and Deng, Xioali (2018) Description and assessment of regional sea-level trends and variability from altimetry and tide gauges at the northern Australian coast. Advances in Space Research, 61 (10). pp. 2540-2554. ISSN 0273-1177

Gillies, Malcolm H. and Foley, Joseph P. and McCarthy, Alison C. (2018) Improving surface irrigation. In: Advances in agricultural machinery and technologies. Taylor & Francis (CRC Press), United States, pp. 225-262. ISBN 978-1-4987-5412-5

Gillies, M. and Attard, S. and Foley, J. (2017) Modernisation of furrow irrigation in the sugar industry: final report 2014/079. Project Report. Sugar Research Australia , Brisbane, Australia. [Report]

Ghanei, Amir and Jafari, Faezeh and Mehrinejad Khotbehsara, Mojdeh and Mohseni, Ehsan and Tang, Waiching and Cui, Hongzhi (2017) Effect of nano-CuO on engineering and microstructure properties of fibre-reinforced mortars incorporating metakaolin: experimental and numerical studies. Materials, 10 (10). ISSN 1996-1944

Gibbings, P. D. (2017) A process to graphically demonstrate distance errors associated with local ground-based coordinate systems. Survey Review, 49 (356). pp. 1-9. ISSN 0039-6265

Gharineiat, Zahra (2017) Coastal altimetry for sea level changes in Northern Australian coastal oceans. [Thesis (PhD/Research)]

Gray, James and Banhazi, Thomas M. and Kist, Alexander A. (2017) Wireless data management system for environmental monitoring in livestock buildings. Information Processing in Agriculture, 4 (1). pp. 1-17.

Gauld, Jason Andrew (2016) Energy & carbon audit of the Scenic Rim Regional Council. [USQ Project]

Gann, Nicholas (2016) Visualisation of a 3D cadastre using terrestrial laser scanning. [USQ Project]

Green, Matthew (2015) Uniformity performance of non-standard overlapped center pivot and lateral move sprinklers. [USQ Project]

Ghabraie, Kazem (2015) An improved soft-kill BESO algorithm for optimal distribution of single or multiple material phases. Structural and Multidisciplinary Optimization, 52 (4). pp. 773-790. ISSN 1615-147X

Gibbings, Peter and Lidstone, John and Bruce, Christine (2015) Engineering phenomenography. In: Theory and method in higher education research. Theory and Method in Higher Education Research, 1. Emerald Group Publishing Limited, United Kingdom, pp. 295-309. ISBN 978-1-78560-287-0

George, Timothy Colin (2015) Soil pore blockage as influenced by livestock effluent with specific focus on colloids. [USQ Project]

Grant, Paula (2015) Good citizenship and plan implementation. In: 29th Annual Associated European Schools of Planning (AESOP) 215 Congress: Definite Space - Fuzzy Responsibility, 13-16 July 2015, Prague, Czech republic.

Ghabraie, Kazem (2015) The ESO method revisited. Structural and Multidisciplinary Optimization, 51 (6). pp. 1211-1222. ISSN 1615-147X

Guan, Lisa and Chen, Guangnan (2015) Pumping systems: design and energy efficiency. In: Encyclopedia of energy engineering and technology, 2nd ed. Encyclopedia of Energy Engineering and Technology, Second Edition - Four Volume Set . Taylor & Francis, United States, pp. 1-8. ISBN 1-4665-0673-3

Ghabraie, Kazem (2015) An improvement technique for bi-directional evolutionary structural optimisation (BESO) method. In: 11th World Congress on Structural and Multidisciplinary Optimisation: Advances in Structural and Multidisciplinary Optimization (WCSMO-11), 7-12 June 2015, Sydney, Australia.

Gillies, M. H. and Smith, R. J. (2015) SISCO: surface irrigation simulation, calibration and optimisation. Irrigation Science, 33 (5). pp. 339-355. ISSN 0342-7188

Gharineiat, Zahra and Deng, Xioali (2015) Application of the multi adaptive regression splines to integrate sea level data from altimetry and tide gauges for monitoring extreme sea level events. Marine Geodesy, 38 (3). pp. 261-276. ISSN 0149-0419

Gibbings, Peter and Lidstone, John and Bruce, Christine (2015) Students' experience of problem-based learning in virtual space. Higher Education Research and Development, 34 (1). pp. 74-88. ISSN 0729-4360

Guo, How-Ran and Hashim, Zailina and Su, Shih-Bin and Bundschuh, Jochen (2015) Environmental toxicology in addressing public health challenges in East Asia [Editorial]. BioMed Research International, 2015. ISSN 2314-6133

Guan, Lisa and Walmselya, Madeleine and Chen, Guangnan (2015) Life cycle energy analysis of eight residential houses in Brisbane, Australia. Procedia Engineering, 121. pp. 653-661.

Guades, Ernesto and Aravinthan, Thiru and Islam, Md Mainul (2014) Characterisation of the mechanical properties of pultruded fibre-reinforced polymer tube. Materials and Design, 63. pp. 305-315. ISSN 0264-1275

Gibbings, Peter and Zahl, Michael (2014) Using RTK GNSS to measure cadastral distances. In: 17th Australasian Remote Sensing and Photogrammetry Conference (ARSPC), the 6th Queensland Surveying & Spatial Conference (QSSC) and the LiDAR Technologies 2014 Conference (QCON14): Repositioning for a Sustainable Future , 7-10 Oct 2014, Cairns, Australia.

Guse, Hayden Alexander (2014) Great artesian basin (GAB) water cooling systems for municipal supplies. [USQ Project]

Grigg, Andrew (2014) Mapping changes in landscape-scale patterns of vegetation in coal seam gas development areas. [USQ Project]

Grant, Paula and Basson, Marita (2014) Planning leadership and governance for regional Queensland. In: 7th Making Cities Liveable Conference , 9-11 Jul 2014, Kingscliff, NSW.

Gibbings, Peter (2014) Qualitatively different ways students experience remote access laboratories. International Journal of Engineering Education, 30 (5). pp. 1120-1129. ISSN 0949-149X

Gibbings, Peter (2014) How to peg a straight line - part 2. Spatial Science Queensland. pp. 20-23.

Gibbings, Peter (2014) How to peg a straight line - part 1. Spatial Science Queensland. pp. 24-27.

Grant, Paula (2013) Old neighbourhoods showcasing new urbanist principles to promote walking for transport. In: 49th World Congress of the International Society of City and Regional Planners (ISOCARP 2013): Frontiers of Planning: Evolving and Declining Models of City Planning Practice, 1-4 Oct 2013, Brisbane, Queensland .

Grant, Paula and Basson, Marita (2013) Reflecting on reflexivity. In: 24th Annual Conference of the Australasian Association for Engineering Education (AaeE 2013): Work Integrated Learning-Applying Theory to Practice in Engineering Education, 8-11 Dec 2013, Gold Coast, Australia.

Gibbings, Peter and Snook, Chris (2013) Benchmarking of final year engineering projects. In: 24th Annual Conference of the Australasian Association for Engineering Education (AaeE 2013): Work Integrated Learning-Applying Theory to Practice in Engineering Education, 8-11 Dec 2013, Gold Coast, Australia.

Green, Nathan Andrew (2013) Investigation of cyclist safety within the Brisbane Bicycle Hire Scheme. [USQ Project]

Gaffney, Allister Henry (2013) Water sensitive urban design for the Spring Creek catchment and MUSIC sensitivity analysis. [USQ Project]

H

Haerani, Haerani and Apan, Armando and Basnet, Badri (2018) Mapping of peanut crops in Queensland, Australia using time-series PROBA-V 100-m normalized difference vegetation index imagery. Journal of Applied Remote Sensing, 12 (3 - Article 036005).

Haque, Md Mahmudul and Rahman, Ataur and Hagare, Dharma and Chowdhury, Rezaul Kabir (2018) A comparative assessment of variable selection methods in urban water demand forecasting. Water, 10 (4). pp. 1-15.

Hama Salih, Samal and Mirza Hassan, Mohammad and Shiau, Jim and Hossain, Zakaria (2018) Numerical simulation of staged braced excavation in sand ~ O6 MRT station. International Journal of GEOMATE, 14 (43). pp. 104-111. ISSN 2186-2990

Hama Salih, Samal and Mirza Hassan, Mohammad and Shiau, Jim and Hossain, Zakaria (2018) A revisit to Nicoll Highway excavation in Singapore. International Journal of GEOMATE, 14 (42). pp. 90-96. ISSN 2186-2982

He, Dongning (2018) Improving the performance of natural rubber using graphene and its derivatives. [Thesis (PhD/Research)]

Hartcher, Michael G. and Chowdhury, Rezaul K. (2017) An alternative method for estimating total impervious area in catchments using high-resolution colour aerial photography. Water Practice and Technology, 12 (2). pp. 478-486.

Hayat, Kashif and Menhas, Saiqa and Bundschuh, Jochen and Chaudhary, Hassan Javed (2017) Microbial biotechnology as an emerging industrial wastewater treatment process for arsenic mitigation: a critical review. Journal of Cleaner Production, 151. pp. 427-438. ISSN 0959-6526

Hughes, Rami (2017) The main factors that promote successful innovation with productivity within the construction industry in Australia: the project manager's perception - an analysis. [Thesis (PhD/Research)]

Hamawand, Ihsan and Sandell, Gary and Pittaway, Pam and Chakrabarty, Sayan and Yusaf, Talal and Chen, Guangnan and Seneweera, Saman and Al-Lwayzy, Saddam and Bennett, John and Hopf, Joshua (2016) Bioenergy from cotton industry wastes: a review and potential. Renewable and Sustainable Energy Reviews, 66. pp. 435-448. ISSN 1364-0321

Heath, Brendon (2016) Investigation into the flexural characteristics of cold formed steel filled with rubberised concrete. [USQ Project]

Hathaway, Samuel B. (2016) Real world 3D accuracy achievable of Australian standard 5488-2013 classification of subsurface utility information using electromagnetic field detection. [USQ Project]

Hafey, Matthew (2016) Reduction of fertiliser losses in agriculture. [USQ Project]

Hawkins, Jared (2016) Using engineering cementitious composites as an adhesive for near-surface mounted FRP bars strengthening concrete/masonry structures. [USQ Project]

Herath, Indika and Vithanage, Meththika and Bundschuh, Jochen and Maity, Jyoti Prakash and Bhattacharya, Prosun (2016) Natural arsenic in global groundwaters: distribution and geochemical triggers for mobilization. Current Pollution Reports, 2 (1). pp. 68-89. ISSN 2198-6592

Hussain, S. N. and Trzcinski, A. P. and Asghar, H. M. A. and Sattar, H. and Brown, N. W. and Roberts, E. P. L. (2016) Disinfection performance of adsorption using graphite adsorbent coupled with electrochemical regeneration for various microorganisms present in water. Journal of Industrial and Engineering Chemistry, 44. pp. 216-225. ISSN 1226-086X

Hancock, Craig Ross (2015) Own mechanism for solving disputes over retaining walls near property boundaries. [USQ Project]

Hooson, Mitchell D (2015) A comparison of the limitations and accuracy of both obstructed prism and obstructed non-prism measurements. [USQ Project]

Hancock, Robert John (2015) An investigation into LandXML for implementation of 3D Cadastre in eSurvey. [USQ Project]

Hestir, Erin L. and Brando, Vittorio and Campbell, Glenn and Dekker, Arnold and Malthus, Tim (2015) The relationship between dissolved organic matter absorption and dissolved organic carbon in reservoirs along a temperate to tropical gradient. Remote Sensing of Environment, 156. pp. 395-402. ISSN 0034-4257

Hamilton, Greg and Akbar, Ghani and Hassan, Iqbal and Raine, Steve and McHugh, Allen and Fisher, Peter and Bakker, Derk and Sheppard, Jessica (2014) Management to improve soil productivity and maximise lateral infiltration in permanent bed-furrow irrigation systems. In: National Soil Science Conference (NSS 2014): Securing Australia's Soils - for Profitable Industries and Healthy Landscapes, 23-27 Nov 2014, Melbourne, Australia.

Harris, Bruce and McDougall, Kevin and Barry, Michael (2014) Characterisation of network objects in natural and anthropic environments. In: ISPRS Technical Commission II Midterm Symposium 2014, 6-8 Oct 2014, Toronto, Canada.

Hesse, Gareth Grant (2014) Development of ductile and ultra-high performance engineered cementitious composite (ECC) with lightweight microsphere additive. [USQ Project]

Hatch, Daniel Roy (2014) Modal testing of existing supermarket floor systems and predictive finite element modelling for better design. [USQ Project]

Hancock, Nashua Thomas (2014) Natural disaster risk management in South Asia a dissertation. [USQ Project]

Holzner, Katherine (2014) Rigid central safety barriers in constrained road environment. [USQ Project]

Hamawand, Ihsan and Yusaf, Talal and Bennett, John (2014) Study and modelling drying of banana slices under superheated steam. Asia-Pacific Journal of Chemical Engineering, 9 (4). pp. 591-603. ISSN 1932-2135

Hizam, R. M. and Karunasena, Warna and Manalo, Allan C. (2014) An experimental investigation on the effect of threaded bolt on the double lap joint strength of pultruded fibre reinforced polymer. In: Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World, 7–9 Apr 2014, Newcastle, Australia.

Hughes, Rami and Thorpe, David (2014) A review of enabling factors in construction industry productivity in an Australian environment. Construction Innovation, 14 (2). pp. 210-228. ISSN 1471-4175

Horan, Darryl (2013) Comparison of a traditional and a distributed storage water supply network for an isolated system. [USQ Project]

Hartwig, Andrew (2013) Management of low traffic volume roads unsealed road classification system. [USQ Project]

Hautsalo, Kari (2013) Evaluation of the performance of different global satellite navigation systems (GNSS) for Australian GNSS users. [USQ Project]

I

Ismail, Wafeek (2015) Evaluating the differences and accuracies between GNSS applications using PPP. [USQ Project]

J

Jamali, Shojaeddin and Chan, Tommy H. T. and Koo, Ki-Young and Nguyen, Andy and Thambiratnam, David P. (2018) Capacity estimation of beam-like structures using substructural method. International Journal of Structural Stability and Dynamics, 18 (12 - Article 1850162). ISSN 0219-4554

Jamali, Shojaeddin and Chan, Tommy H. T. and Nguyen, Andy and Thambiratnam, David P. (2018) Modelling techniques for structural evaluation for bridge assessment. Journal of Civil Structural Health Monitoring, 8 (2). pp. 271-283. ISSN 2190-5452

John, Martina and Trzcinski, Antoine Prandota and Zhou, Yan and Ng, Wun Jern (2017) Microbial stress mediated intercellular nanotubes in an anaerobic microbial consortium digesting cellulose. Scientific Reports, 7.

Jayatilake, Indunil Nayanakanthi (2017) Dynamic behaviour of composite sandwich beams and plates with debonds. [Thesis (PhD/Research)]

Jackson, Scott (2016) Development of a sustainable footpath material using recycled road profile, natural soils and PolyCom stabilising aid. [USQ Project]

James, Jake (2016) Evaluation of the use of safety barriers on roundabouts. [USQ Project]

Jelacic, Antonio (2016) Terrestrial laser scanner for 3D modelling of USQ Toowoomba campus. [USQ Project]

James, Jeffrey (2016) The effect of materials and conditions on reflectorless electronic distance measurements from a Total station. [USQ Project]

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2016) Influence of single and multiple skin-core debonding on free vibration characteristics of innovative GFRP sandwich panels. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 9 (5). pp. 800-804.

Jayatilake, Indunil N. and Karunasena, Warna and Lokuge, Weena (2016) Finite element based dynamic analysis of multilayer fibre composite sandwich plates with interlayer delaminations. Advances in Aircraft and Spacecraft Science, 3 (1). pp. 15-28. ISSN 2287-528X

Jordan, Bradley (2015) Analysis of bridges subjected to flood loadings based on different design standards. [USQ Project]

Jessup, Cameron (2015) Launceston’s Combined Sewerage System – investigation and strategy development. [USQ Project]

Jean, Jiin-Shuh and Wang, Chien-Lih and Hsiang, Hsing-I. and Li, Zhaohui and Yang, Huai-Jen and Jiang, Wei-Teh and Yang, Kenn-Ming and Bundschuh, Jochen (2015) Experimental investigation of trace element dissolution in formation water in the presence of supercritical CO2 fluid for a potential geological storage site of CO2 in Taiwan. Journal of Natural Gas Science and Engineering, 23. pp. 304-314. ISSN 1875-5100

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2014) Dynamic behaviour of fibre composite multilayer sandwich plates with delaminations. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 9-12 Dec 2014, Byron Bay, Australia.

Jayatilake, Indunil N. and Karunasena, Warna and Lokuge, Weena (2014) Dynamic analysis of multilayer GFRP sandwich slabs with interlayer delaminations. In: 8th Australasian Congress on Applied Mechanics (ACAM 8), 24–28 Nov 2014, Melbourne, Australia.

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2013) Dynamic behaviour of debonded GFRP composite beams. Journal of Multifunctional Composites, 1 (2). pp. 113-122. ISSN 2168-4246

Johnson, Peter (2013) Comparison of direct rainfall and lumped-conceptual rainfall runoff routing methods in tropical North Queensland – a case study of Low Drain, Mount Low, Townsville. [USQ Project]

Jenaway, Brett (2013) Evolution of stadiums: a study in the design and construction of ancient and modern stadia. [USQ Project]

Jin, Lu and Zhuge, Yan (2013) A Markov chain Monte Carlo technique based optimal mix design of porous concrete. 3rd International Conference on Civil Engineering, Architecture and Building Materials (CEABM 2013), 357-360. pp. 959-962. ISSN 1660-9336

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2013) Effect of skin-core debonding on the dynamic behaviour of GFRP composite beams. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

K

Koswatte, Saman and McDougall, Kevin and Liu, Xiaoye (2018) Relevance assessment of crowdsourced data (CSD) using semantics and geographic information retrieval (GIR) techniques. International Journal of Geo-Information, 7 (7). pp. 1-18. ISSN 2220-9964

Koswatte, Saman and McDougall, Kevin and Liu, Xiaoye (2017) VGI and crowdsourced data credibility analysis using spam email detection techniques. International Journal of Digital Earth. pp. 1-13. ISSN 1753-8947

Kiran, Esra Uckun and Trzcinski, Antoine (2017) Optimizing the conversion of food waste to sugars using fungal enzymes. EC Microbiology, 8.3. pp. 98-112.

Kunacheva, Chinagarn and Soh, Yan Ni Annie and Trzcinski, Antoine P. and Stuckey, David C. (2017) Soluble microbial products (SMPs) in the effluent from a submerged anaerobic membrane bioreactor (SAMBR) under different HRTs and transient loading conditions. Chemical Engineering Journal, 311. pp. 72-81. ISSN 1385-8947

Khan, Ziaullah (2017) Experimental and numerical study on fracture behaviour of bamboo fibres reinforced epoxy composites. [Thesis (PhD/Research)]

Koswatte, Saman (2017) Geospatial crowdsourced data fitness analysis for spatial data infrastructure based disaster management actions. [Thesis (PhD/Research)]

Kelly, Nick and Bennett, John McLean and Starasts, Ann (2017) Networked learning for agricultural extension: a framework for analysis and two cases. Journal of Agricultural Education and Extension, 23 (5). pp. 399-414. ISSN 1389-224X

King, Matthew (2016) An investigation into the potential benefit/value of Ipswich CBD residential revitalisation. [USQ Project]

King, Job (2016) Behaviour of concrete with oil contamination and reinforced with fibres. [USQ Project]

Kohler, Jarred (2016) Soil stabilisation in road pavements. [USQ Project]

Koswatte, Saman and McDougall, Kevin and Liu, Xiaoye (2016) Semantic location extraction from crowdsourced data. In: XXIII International Society for Photogrammetry and Remote Sensing (ISPRS 2016), 12–19 July 2016, Prague, Czech Republic.

Kalendher, F. and Setunge, S. and Mohseni, H. and Lokuge, W. (2016) Analysis of flood impact on reinforced concrete(Pre-stressed) girder bridges – a case study. In: 8th International Conference on Bridge Maintenance, Safety and Management (IABMAS 2016) , 26-30 Jun 2016, Foz Do Iguacu, Brazil.

Keightley, Anthony J (2016) A numerical investigation into sinkhole formation. [USQ Project]

Khawprateep, S. and Jensen, T. A. and Schroeder, B. L. and Eberhard, S. (2016) Influence of yield and other cane characteristics on cane loss and product quality. In: 29th Congress of the International Society of Sugar Cane Technologists (ISSCT 2016), 5-8 Dec 2016, Chiang Mai, Thailand .

Kalendher, F. and Setunge, S. and Mohseni, H. and Lokuge, W. (2015) Deriving damage indices for concrete girder bridges subjected to flood loading. In: 6th International Conference on Structural Engineering and Construction Management (CSECM) 2015, 11-14 Dec 2015, Kandy, Sri Lanka.

Khaliq, Sohail Abdul and Mahmood, Muhammad Nateque and Das, Narottam (2015) Towards a best practice asset management framework for electrical power distribution organisations. In: 2015 IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC 2015), 15-18 Nov 2015, Brisbane, Australia.

Kilpatrick, Glen R (2015) DEM generation and hydrologic modelling using LiDAR data. [USQ Project]

Kerr, James (2015) Dynamic response testing method of damage detection in fibre composite structures. [USQ Project]

Kelderman, Simon (2015) Using a sprinkler infiltrometer and the GAML model to predict moving sprinkler performance in the field. [USQ Project]

Koenig, Nathan (2015) Project Management Maturity in Local Government. [USQ Project]

Koswatte, S. and McDougall, K. and Liu, X. (2015) SDI and crowdsourced spatial information management automation for disaster management. Survey Review, 47 (344). pp. 307-315. ISSN 0039-6265

Koech, R. and Smith, R. and Gillies, M. (2015) Trends in the use of surface irrigation in Australian irrigated agriculture. Water - Journal of the Australian Water Association , 42 (5). pp. 84-92. ISSN 0310-0367

Kiran, Esra Uckun and Trzcinski, Antoine P. and Liu, Yu (2015) Platform chemicals production from food wastes using a biorefinery concept. Journal of Chemical Technology and Biotechnology, 90 (8). pp. 1364-1379. ISSN 0268-2575

Kiran, Esra Uckun and Trzcinski, Antoine P. and Liu, Yu (2015) Enhancing the hydrolysis and methane production potential of mixed food waste by an effective enzymatic pretreatment. Bioresource Technology, 183. pp. 47-52. ISSN 0960-8524

Kiran, Esra Uckun and Trzcinski, Antoine P. and Ng, Wun Jern and Liu, Yu (2014) Enzyme production from food wastes using a biorefinery concept. Waste and Biomass Valorization, 5 (6). pp. 903-917. ISSN 1877-2641

Koswatte, Saman and McDougall, Kevin and Liu, Xiaoye (2014) SDI and crowdsourced spatial information management automation for disaster management. In: FIG Commission 3 Workshop 2014, 4-7 Nov 2014, Bologna, Italy.

Kiran, Esra Uckun and Trzcinski, Antoine and Ng, Wun Jern and Liu, Yu (2014) Bioconversion of food waste to energy: a review. Fuel, 134. pp. 389-399. ISSN 0016-2361

Knipe, Russell Alexander (2014) 3D fluid modelling of the O.O. Madsen Bridge during flood. [USQ Project]

Knight, Tracey Anne (2014) Alkali-silica reaction in concrete bridge piles: strengthening with fibre-reinforced polymers. [USQ Project]

Knight, Tracey Anne (2014) Alkali-silica reaction in concrete bridge piles: treatment and strengthening with fibre-reinforced polymers. [USQ Project]

King, Bernie-Anne (2014) The effect of road roughness on traffic speed and road safety. [USQ Project]

Kraljik, David (2014) The value of public space – a town square in a small urban community. [USQ Project]

Kiran, Esra Uckun and Trzcinski, Antoine P. and Liu, Yu (2014) Developing novel biorefineries using food waste as substrate. In: 248th American Chemical Society National Meeting & Exposition , 10-14 Aug 2014, San Francisco, California.

Kiran, Esra Uckun and Trzcinski, Antoine P. and Liu, Yu (2014) Glucoamylase production from food waste by solid state fermentation and its evaluation in the hydrolysis of domestic food waste. Biofuel Research Journal, 1 (3). pp. 98-105.

Karunasena, W. and Jayatilake, I. and Lokuge, W. (2013) Free vibration behaviour of fibre composite sandwich beams with debonds. In: 4th International Conference on Structural Engineering and Construction Management 2013 (ICSECM 2013), 13-15 Dec 2013, Kandy, Sri Lanka.

Kirjan, Jeremy Nicholas (2013) Use of wire extensometers for monitoring pavement performance in areas of slope instability. [USQ Project]

Kohn, Nicholas (2013) Effects of proposed bioretention system on existing waterbird habitat. [USQ Project]

Karki, Sudarshan and Thompson, Rod and McDougall, Kevin (2013) Development of validation rules to support digital lodgement of 3D cadastral plans. Computers, Environment and Urban Systems , 40. pp. 34-45. ISSN 0198-9715

L

Lokuge, Weena and Wilson, Aaron and Gunasekara, Chamila and Law, David W. and Setunge, Sujeeva (2018) Design of fly ash geopolymer concrete mix proportions using Multivariate Adaptive Regression Spline model. Construction and Building Materials, 166. pp. 472-481. ISSN 0950-0618

Lollback, Gregory W. and Dunwoody, J. Ernest and Mebberson, Rachel and Shuker, Jonathan D. and Page, Tahlie and Hayles, Sarann J. and Rakotopare, Nicolas and Liu, Xiaoye and Hero, Jean-Marc (2018) Spatial modelling of bilby (Macrotis lagotis) and rabbit (Oryctolagus cuniculus) pellets within a predator-proof enclosure. Australian Mammalogy, 40 (1). pp. 93-102. ISSN 0310-0049

Lokuge, Weena and Wilson, Matthew and Tran, Huu and Setunge, Sujeeva (2017) Predicting the failure of timber bridges by using current inspection reports. Engineering for Public Works (7). pp. 85-89.

Li, Xuwei and Aziz, Naj and Mirzaghorbanali, Ali and Nemcik, Jan (2017) Comparison of the shear test results of a cable bolt on three laboratory test apparatuses. Tunnelling and Underground Space Technology, 61. pp. 82-89. ISSN 0886-7798

Lazim, S. S. R. M. and Nawi, N. M. and Chen, G. and Jensen, T. and Rasli, A. M. M. (2016) Influence of different pre-processing methods in predicting sugarcane quality from near-infrared (NIR) spectral data. International Food Research Journal, 23(Suppl). S231-S236. ISSN 1985-4668

Lowry, Mark (2016) A validation of the model for effluent disposal using land irrigation (MEDLI). [USQ Project]

Lister, James (2016) Design of high modulus asphalt overlay for concrete pavements. [USQ Project]

Lazzarini, Sarah-Jane (2016) Development stages of a road management strategy suitable to the Burdekin shire. [USQ Project]

Lynch, Joshua David (2016) Investigation of dam wall deformation surveys. [USQ Project]

Lund, Nicholas (2016) Optimisation of long line GNSS networks using Geoscience Australia’s AUSPOS service and static baselines. [USQ Project]

Lokuge, Weena and Gamage, Nirdosha and Setunge, Sujeeva (2016) Fault tree analysis method for deterioration of timber bridges using an Australian case study. Built Environment Project and Asset, 6 (3). pp. 332-344. ISSN 2044-124X

Lokuge, Weena and Karunasena, Warna (2016) Ductility enhancement of geopolymer concrete columns using FRP confinement. Journal of Composite Materials, 50 (14). pp. 1887-1896. ISSN 0021-9983

Li, Xuwei and Aziz, Naj and Mirzaghorbanali, Ali and Nemcik, Jan (2016) Behavior of fiber glass bolts, rock bolts and cable bolts in shear. Rock Mechanics and Rock Engineering, 49 (7). pp. 2723-2735. ISSN 0723-2632

Lu, Caiyun and Li, Hongwen and He, Jin and Wang, Qingjie and Sarker, Khokan Kumer and Li, Wenying and Lu, Zhanyuan and Rasaily, Rabi G. and Li, Hui and Chen, Guangnan (2016) Influence of controlled traffic no-till system on soil chemical properties and crop yield in annual double-cropping area of the North China Plain. Soil Research, 54 (6). pp. 760-766. ISSN 1838-675X

Linnan, Nicholas (2015) Creating a performance management system for contractors to assess subcontractors. [USQ Project]

Labrosse, Alexander (2015) Progress towards sustainable road construction – An investigation into the Roads and Maritime Services of New South Wales and Sustainability Rating Tools. [USQ Project]

Lieschke-Mercer, Yvette (2015) The feasibility of using constructed wetlands systems for urban wastewater. [USQ Project]

Li, Xuwei and Nemcik, Jan and Mirzaghorbanali, Ali and Aziz, Naj and Rasekh, Haleh (2015) Analytical model of shear behaviour of a fully grouted cable bolt subjected to shearing. International Journal of Rock Mechanics and Mining Sciences, 80. pp. 31-39. ISSN 1365-1609

Lokuge, Weena and Sanjayan, Jay and Setunge, Sujeeva (2015) Use of geopolymer concrete in column applications. In: 27th Biennial National Conference of the Concrete Institute of Australia (Concrete 2015) in conjunction with the 69th RILEM Week: Construction Innovations, Research into Practice, 30 Aug-02 Sept 2015, Melbourne, Australia.

Lokuge, Weena and Mohseni, Hessam and Setunge, Sujeeva and Simpson, Scott (2015) Evaluation of case study concrete bridges in Victoria under effects of bushfire. In: 5th International Conference on Building Resilience, 15-17 July 2015, Newcastle, Australia.

Logitharan, Lokanantham R. and Somasundaraswaran, Kathirgamalingam and Ramanujam, Jothi M. (2015) Rehabilitation works in Queensland using foamed bituminous stabilisation. International Journal of GEOMATE, 8 (16). pp. 1308-1315. ISSN 2186-2982

Logitharan, R. L. and Somasundaraswaran, K. and Ramanujam, J. M. (2015) Recent design strategies adapted for foamed bituminous stabilisation in flexible pavement rehabilitation works in Queensland. In: 14th Conference of the International Association for Computer Methods and Recent Advances in Geomechanics (IACMAG 2014), 22-25 Sep 2014, Kyoto, Japan.

Lembo, Kurt and Lokuge, Weena and Karunasena, Warna (2014) Geopolymer concrete with FRP confinement. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 9-12 Dec 2014, Byron Bay, Australia.

Lokuge, Weena and Aravinthan, Thiru (2014) Stress-strain behaviour of unconfined polymer concrete. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 9-12 Dec 2014, Byron Bay, Australia.

Logitharan, Lokanantham and Somasundaraswaran, Kathirgamalingam and Ramanujam, Jothi M. (2014) Recent foamed bituminous stabilisation works in Queensland. In: 4th International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2014), 19-21 Nov 2014, Brisbane, Australia.

Liddell, Benjamin Steven (2014) Assessing the true cost of design variations – a designer’s perspective. [USQ Project]

Lebbe, Mohamed Farook Kalendher and Lokuge, Weena and Setunge, Sujeeva and Zhang, Kevin (2014) Failure mechanisms of bridge infrastructure in an extreme flood event. In: 1st International Conference on Infrastructure Failures and Consequences (ICFC 2014), 16-20 Jul 2014, Melbourne, Australia.

Lokuge, Weena and Setunge, Sujeeva and Karunasena, Warna (2014) Investigating the performance of floodway in an extreme flood event. In: 1st International Conference on Infrastructure Failures and Consequences (ICFC 2014), 16-20 Jul 2014, Melbourne, Australia .

Luh, L. C. and Setan, H. and Majid, Z. and Chong, A. K. and Tan, Z. (2014) High resolution survey for topographic surveying. IOP Conference Series: Earth and Environmental Science, 18 (1). pp. 1-6. ISSN 1755-1315

Lee, Jaslyn Jie Lin and Chen, Liwei and Shi, Jiahua and Trzcinski, Antoine and Chen, Wei-Ning (2014) Metabolomic profiling of Rhodosporidium toruloides grown on glycerol for carotenoid production during different growth phases. Journal of Agricultural and Food Chemistry, 62 (41). pp. 10203-10209. ISSN 0021-8561

Lokuge, Weena and Aravinthan, Thiru (2013) Comparative assessment of polymer concrete with different types of resin. In: Concrete 2013: Understanding Concrete , 16-18 Oct 2013, Gold Coast, Australia.

Lokuge, Weena and Karunasena, W. and Heemskerk, Colin (2013) Effect of strain rate on geopolymer concrete. In: Concrete 2013: Understanding Concrete, 16-18 Oct 2013, Gold Coast, Australia.

Lokuge, Weena and Aravinthan, Thiru (2013) Effect of fly ash on the behaviour of polymer concrete with different types of resin. Materials and Design, 51. pp. 175-181. ISSN 0264-1275

Lam-Dao, Nguyen and Le-Toan, Thuy and Apan, Armando and Huth, Juliane and Hoang-Phi, Phung (2013) Rice monitoring in the Mekong Delta, Vietnam. In: 33rd Asian Conference on Remote Sensing (ACRS 2012): Aiming Smart Space Sensing, 26-30 Nov 2012, Pattaya, Thailand.

Lokuge, Weena and Setunge, Sujeeva (2013) Evaluating disaster resilience of bridge infrastructure when exposed to extreme natural events. In: 3rd International Conference on Building Resilience: Individual, Institutional and Societal Coping Strategies to Address the Challenges Associated with Disaster Risk, 17-19 Sep 2013, Heritance Ahungalla, Sri Lanka .

M

Mohammadi, S. and Ataei, M. and Khaloo Kakaie, R. and Mirzaghorbanali, A. (2018) Prediction of the main caving span in longwall mining using fuzzy MCDM technique and statistical method. Journal of Mining and Environment. pp. 1-11. ISSN 2251-8592

Maraqa, Munjed and Chowdhury, Rezaul and Mauga, Timur and Albuquerque, Daniel and Alzard, Mohammed and Khan, Qasim and Kamareddine, Lina and Sherif, Mohamed (2018) Assessing the carbon footprint of road projects and related sustainability initiatives in Abu Dhabi - technical Report III (Part I - main report). Technical Report. Abu Dhabi City Municipality , United Arab Emirates. [Report]

Mehrinejad Khotbehsara, Mojdeh and Mehdizadeh Miyandehi, Bahareh and Naseri, Farzad and Ozbakkaloglu, Togay and Jafari, Faezeh and Mohseni, Ehsan (2018) Effect of SnO2, ZrO2, and CaCO3 nanoparticles on water transport and durability properties of self-compacting mortar containing fly ash: experimental observations and ANFIS predictions. Construction and Building Materials (158). pp. 823-834. ISSN 0950-0618

Mirzaghorbanali, Ali and Rasekh, Haleh and Aziz, Naj and Yang, Guanyu and Khaleghparast, Saman and Nemcik, Jan (2017) Shear strength properties of cable bolts using a new double shear instrument, experimental study, and numerical simulation. Tunnelling and Underground Space Technology, 70 (70). pp. 240-253. ISSN 0886-7798

McLeod, Julia (2017) Performance of water sensitive urban design bioretention installations on the Gold Coast. [USQ Project]

Ma, Shuji and Aziz, Naj and Nemcik, Jan and Mirzaghorbanali, Ali (2017) The effects of installation procedure on bond characteristics of fully grouted rock bolts. Geotechnical Testing Journal, 40 (5). ISSN 1945-7545

Mehrinejad Khotbehsara, Mojdeh and Mohseni, Ehsan and Ozbakkaloglu, Togay and Ranjbar, Malek Mohammad (2017) Durability characteristics of self-compacting concrete incorporating pumice and metakaolin. Journal of Materials in Civil Engineering, 29 (11). ISSN 0899-1561

Manalo, Allan and Maranan, Ginghis and Sharma, Sukrant and Karunasena, Warna and Bai, Yu (2017) Temperature-sensitive mechanical properties of GFRP composites in longitudinal and transverse directions: a comparative study. Composite Structures, 173. pp. 255-267. ISSN 0263-8223

Muttashar, Majid and Manalo, Allan and Karunasena, Warna and Lokuge, Weena (2017) Flexural behavior of glued GFRP tubes filled with concrete. In: 6th Asia-Pacific Conference on FRP in Structures (APFIS2017), 19-21 July 2017, Singapore.

Maranan, G. B. and Manalo, A. C. and Benmokrane, B. and Karunasena, W. and Mendis, P. (2017) Shear behavior of geopolymer concrete beams reinforced with glass fiber-reinforced polymer bars. ACI Structural Journal, 114 (2). pp. 337-348. ISSN 0889-3241

Mohamed, Mohamed M. and Murad, Ahmed and Chowdhury, RezaulKabir (2017) Evaluation of groundwater quality in the Eastern District of Abu Dhabi Emirate, UAE. Bulletin of Environmental Contamination and Toxicology, 98 ( 3). pp. 385-391. ISSN 0007-4861

Manalo, Allan and Aravinthan, Thiru and Fam, Amir and Benmokrane, Brahim (2017) State-of-the-art review on FRP sandwich systems for lightweight civil infrastructure. Journal of Composites for Construction, 21 (1). pp. 1-16. ISSN 1090-0268

Mirzaghorbanali, A. and Aziz, N. (2017) An experimental study of axial load transfer mechanisms of cable bolts using axially split embedment apparatus. Journal of Mining and Environment, 8 (2). pp. 131-137. ISSN 2251-8592

Muttashar, M. and Karunasena, W. and Manalo, A. and Lokuge, W. (2017) Behavior of pultruded multi-celled GFRP hollow beams with low-strength concrete infill. In: 24th Australasian Conference on the Mechanics of Structures and Materials: Advancements and Challenges (ACMSM24), 6-9 Dec 2016, Perth, Australia.

Muttashar, Majid Dhahir (2017) Behaviour of multi-celled GFRP beam assembly with concrete infill: experimental and theoretical evaluations. [Thesis (PhD/Research)]

Muttashar, Majid and Manalo, Allan and Karunasena, Warna and Lokuge, Weena (2017) Flexural behaviour of multi-celled GFRP composite beams with concrete infill: experiment and theoretical analysis. Composite Structures, 159. pp. 21-33. ISSN 0263-8223

Muttashar, M. and Manalo, A. and Karunasena, W. and Lokuge, W. (2016) Experimental investigation on the flexural behaviour of pultruded GFRP beams filled with different concrete strengths. In: 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, 14-16 Dec 2016, Hong Kong, China.

Miller, James (2016) Examining the Hansen Global Forest Change (2000 - 2014) dataset within an Australian local government area. [USQ Project]

Mccullagh, Harry James (2016) An investigation of the predictive accuracy of salinity forecast using the source IMS for the Murray-Darling river. [USQ Project]

Milton, Ross (2016) Analysis of road safety trends at signalised intersections in Toowoomba. [USQ Project]

McDonnell, James (2016) Effect of time interval variations on network RTK in a high multipath environment. [USQ Project]

McLinden, Joshua (2016) Functional design report: Corry’s road sewerage augmentation. [USQ Project]

Mear, Benjamin (2016) Improving design standards for passing lanes on rural highways in Queensland. [USQ Project]

Mepham, Matthew (2016) Recent trends of stabilisation methods: a case study for rural roads by councils in the New England region of NSW. [USQ Project]

McFadden, Patrick (2016) Tidal predictions in ungauged estuaries for boat-ramp access windows. [USQ Project]

McCarthy, William (2016) Validation of commercial precision spraying technology. [USQ Project]

Manalo, Allan and Surendar, Swetha and van Erp, Gerard and Benmokrane, Brahim (2016) Flexural behavior of an FRP sandwich system with glass-fiber skins and a phenolic core at elevated in-service temperature. Composite Structures, 152. pp. 96-105. ISSN 0263-8223

Mohamed, M. and El-Shorbagy, W. and Chowdhury, R. and Kizhisseri, M. and Nawaz, R. and McDonald, A. and Tompkins, J. (2016) Abu Dhabi water budget model: technical documentation and user guide. Technical Report. Unpublished , United Arab Emirates. [Report]

Mohamed, M. and El-Shorbagy, W. and Chowdhury, R. and Kizhisseri, M. and Nawaz, R. and McDonald, A. and Tompkins, J. (2016) Developing a dynamic approach to water budgeting for the Emirate of Abu Dhabi: final report. Technical Report. Unpublished , United Arab Emirates. [Report]

Maranan, G. B. and Manalo, A. C. and Benmokrane, B. and Karunasena, W. and Mendis, P. (2016) Behaviour of concentrically loaded geopolymer-concrete circular columns reinforced longitudinally and transversely with GFRP bars. Engineering Structures, 117. pp. 422-436. ISSN 0141-0296

Muttashar, Majid and Manalo, Allan and Karunasena, Warna and Lokuge, Weena (2016) Influence of infill concrete strength on the flexural behaviour of pultruded GFRP square beams. Composite Structures, 145. pp. 58-67. ISSN 0263-8223

Manalo, Allan and Sirimanna, Chamila and Karunasena, Warna and McGarva, Lance and Falzon, Paul (2016) Pre-impregnated carbon fibre reinforced composite system for patch repair of steel I-beams. Construction and Building Materials, 105. pp. 365-376. ISSN 0950-0618

Mirza, Ali and Aziz, Naj and Ye, Wang and Nemcik, Jan (2016) Mechanical properties of grouts at various curing times. In: 2016 Coal Operators' Conference, 10-12 Feb 2016, Wollongong, Australia.

Mahmood, Muhammad Nateque and Keast, Robyn (2016) Bridging the gaps between impact assessments and resettlement planning: a case study of Padma Multipurpose Bridge Project, Bangladesh. Planning Practice and Research, 31 (1). pp. 41-64. ISSN 0269-7459

Mei, Qichang and Chong, Albert and Gu, Yaodong and Zheng, Zhiyi and Fernandez, Justin and UNSPECIFIED (2016) A performance-related foot loading characters while performing lunging step among badminton players. In: 34rd International Conference on Biomechanics in Sports (ISBS 2016), 18-22 July 2016 , Tsukuba, Japan.

Mushtaq, Shahbaz and Bundschuh, Jochen (2016) An innovative systematic approach to internalize external costs of salinization in major irrigated systems. Groundwater for Sustainable Development, 2-3. pp. 16-26. ISSN 2352-801X

Muttashar, Majid and Karunasena, Warna and Manalo, Allan and Lokuge, Weena (2016) Behaviour of hollow pultruded GFRP square beams with different shear span-to-depth ratios. Journal of Composite Materials, 50 (21). pp. 2925-2940. ISSN 0021-9983

Maranan, Ginghis Bautista (2016) Structural behaviour of geopolymer concrete beams and columns reinforced with glass fibre reinforced polymer bars. [Thesis (PhD/Research)]

Muttashar, Majid and Karunasena, Warna and Manalo, Allan and Lokuge, Weena (2015) Testing and characterization of pultruded glass fiber reinforced polymer (GFRP) beams. In: Joint Conference of the 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & the 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015), 14-16 Dec 2015, Nanjing, China.

Muttashar, Majid and Karunasena, Warna and Manalo, Allan and Lokuge, Weena (2015) The effect of shear span-to-depth ratio on the failure mode and strength of pultruded GFRP beams. In: Joint Conference of the 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & the 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015), 14-16 Dec 2015, Nanjing, China.

Manalo, Allan and Pac, Mac (2015) Structural behaviour of pultruded fibre composites guardrail system under horizontal loading. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. ISSN 1464-4207

Maranan, Ginghis B. and Manalo, Allan C. and Karunasena, Warna M. and Benmokrane, Brahim and Mendis, Priyan A. (2015) Comparison of the shear behaviour of geopolymer concrete beams with GFRP and steel transverse reinforcements. In: Joint Conference of the 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & the 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015), 14-16 Dec 2015, Nanjing, China.

Maranan, G.B. and Manalo, A.C. and Karunasena, W. and Benmokrane, B. (2015) Pullout behaviour of GFRP bars with anchor head in geopolymer concrete. Composite Structures, 132. pp. 1113-1121. ISSN 0263-8223

Moes, Denika (2015) Power-Law flood frequency analysis of selected Queensland stream gauges. [USQ Project]

Mattsson, Bradley I (2015) The identification of all rights, obligations, and restrictions on freehold land in South Australia. [USQ Project]

Maranan, G. and Manalo, A. C. and Benmokrane, B. and Karunasena, W. and Mendis, P. (2015) Evaluation of the flexural strength and serviceability of geopolymer concrete beams reinforced with glass-fibre-reinforced polymer (GFRP) bars. Engineering Structures, 101. pp. 529-541. ISSN 0141-0296

Manalo, Allan C. and Wani, Evans and Zulkarnain, Noor Azwa and Karunasena, Warna and Lau, Kin-tak (2015) Effects of alkali treatment and elevated temperature on the mechanical properties of bamboo fibre-polyester composites. Composites Part B: Engineering, 80 (1). pp. 73-83. ISSN 1359-8368

Murdoch, Robert (2015) Creating a simplified model of the Alkali-Silica Reaction in concrete by utilising finite element modelling techniques. [USQ Project]

Mehdizadeh, Saman Abdanan and Banhazi, Thomas M. (2015) Evaluating droplet distribution of spray-nozzles for dust reduction in livestock buildings using machine vision. International Journal of Agricultural and Biological Engineering, 8 (5). pp. 58-64. ISSN 1934-6344

Maskall, Jonathon (2015) Exploration of evaporation mitigation measurement techniques. [USQ Project]

McIntyre, Jamie (2015) Monitoring and removal of natural organic matter (NOM) from Toowoomba water sources. [USQ Project]

Maranan, Ginghis B. and Manalo, Allan C. and Karunasena, Warna and Benmokrane, Brahim and Mendis, Priyan (2015) Flexural response of GFRP-reinforced geopolymer concrete beams. In: 27th Biennial National Conference of the Concrete Institute of Australia (Concrete 2015) in conjunction with the 69th RILEM Week: Construction Innovations, Research into Practice, 30 Aug - 2 Sept 2015, Melbourne, Australia.

Maranan, Ginghis and Manalo, Allan and Karunasena, Karu and Benmokrane, Brahim (2015) Bond stress-slip behavior: case of GFRP bars in geopolymer concrete. Journal of Materials in Civil Engineering, 27 (1). pp. 4014116-1. ISSN 0899-1561

Mahmood, Muhammad Nateque and Dhakal, Subas and Wiewiora, Anna and Brown, Kerry and Keast, Robyn (2015) A comparative study on asset management capability maturity models. International Journal of Strategic Engineering Asset Management, 2 (4). pp. 328-347. ISSN 1759-9733

Mehdizadeh, S. Abdanan and Neves, D. P. and Tscharke, M. and Naas, I. A. and Banhazi, T. M. (2015) Image analysis method to evaluate beak and head motion of broiler chickens during feeding. Computers and Electronics in Agriculture, 114. pp. 88-95. ISSN 0168-1699

Mahmood, Muhammad Nateque and Dhakal, Subas Prasad and Wiewiora, Anna and Keast, Robyn and Brown, Kerry (2015) Towards an integrated maturity model of asset management capabilities. In: Proceedings of the 7th World Congress on Engineering Asset Management (WCEAM 2012). Lecture Notes in Mechanical Engineering. Springer International Publishing, Cham, Switzerland, pp. 431-441. ISBN 978-3-319-02461-5

Maity, Jyoti Prakash and Bundschuh, Jochen and Chen, Chien-Yen and Bhattacharya, Prosun (2014) Microalgae for third generation biofuel production, mitigation of greenhouse gas emissions and wastewater treatment: present and future perspectives - a mini review. Energy, 78. pp. 104-113. ISSN 0360-5442

Muttashar, Majid and Lokuge, Weena and Karunasena, Warna (2014) Geopolymer concrete: the green alternative with suitable structural properties. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 9-12 Dec 2014, Byron Bay, Australia.

Maranan, G. B. and Manalo, A. C. and Karunasena, W. and Benmokrane, B. and Lutze, D. (2014) Flexural behaviour of glass fibre reinforced polymer (GFRP) bars subjected to elevated temperature. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 9-12 Dec 2014, Byron Bay, Australia.

Melland, Alice R. and Eberhard, Jochen and Paton, Col and Baillie, Craig and Bennett, John McL. (2014) A comparison of rehabilitated coal mine soil and unmined soil supporting grazed pastures in south-east Queensland. In: National Soil Science Conference (NSS 2014): Securing Australia's Soils for Profitable Industries and Healthy Landscapes, 23-27 Nov 2014, Melbourne, Australia.

Marchuk, A. and Marchuk, S. and Bennett, J. and Eyres, M. and Scott, E. (2014) An alternative index to ESP to explain dispersion occurring in Australian soils when Na content is low. In: National Soil Science Conference (NSS 2014): Securing Australia's Soils - for Profitable Industries and Healthy Landscapes, 23-27 Nov 2014, Melbourne, Australia.

Melland, Alice R. and Eberhard, Jochen and Paton, Col and Baillie, Craig and Bennett, John McL. (2014) The potential for a rehabilitated coal mine soil to support livestock grazing in south-east Queensland. In: National Soil Science Conference (NSS 2014): Securing Australia's Soils - for Profitable Industries and Healthy Landscapes, 23-27 Nov 2014, Melbourne, Australia.

McKenzie, Seren (2014) Development of a road safety plan for Scenic Rim Regional Council. [USQ Project]

Makireddi, Surya (2014) Groundwater recharge prediction for broad scale irrigation modelling: a case study in the M.I.A-main canal irrigated areas. [USQ Project]

Makireddi, Surya (2014) Groundwater recharge prediction for broadscale irrigation modelling: a case study in MIA-Main Canal irrigated areas. [USQ Project]

Miller, Nadya (2014) The impact of a new light rail network upon walkability in a central business district. [USQ Project]

Manalo, Allan C. and Karunasena, Warna and Sirimanna, Chamila and Maranan, Ginghis B. (2014) Investigation into fibre composites jacket with an innovative joining system. Construction and Building Materials, 65. pp. 270-281. ISSN 0950-0618

Maranan, Ginghis B. and Manalo, Allan C. and Karunasena, Karu and Benmokrane, Brahim (2014) Bond-slip behaviour of GFRP bars into geopolymer concrete. In: 7th International Conference on FRP Composites in Civil Engineering (CICE 2014), 20-22 Aug 2014, Vancouver, Canada.

Manalo, Allan (2014) Structural behavior of fibre composite guardrails. In: 7th International Conference on FRP Composites in Civil Engineering (CICE 2014), 20-22 Aug 2014, Vancouver, Canada.

Mahmood, Muhammad Nateque and Dhakal, Subas Prasad and Keast, Robyn (2014) The state of multi-purpose cyclone shelters in Bangladesh. Facilities, 32 (9/10). pp. 522-532. ISSN 0263-2772

Manalo, Allan and Benmokrane, Brahim and Park, Ki-Tae and Lutze, Darren (2014) Recent developments on FRP bars as internal reinforcement in concrete structures. Concrete in Australia, 40 (2). pp. 46-56. ISSN 1440-656X

Muttashar, Majid and Manalo, Allan and Karunasena, Warna and Lokuge, Weena (2014) Flexural and axial behavior of pultruded GFRP hollow sections filled with low strength concrete. In: Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World, 7–9 Apr 2014, Newcastle, Australia.

Mahmood, Muhammad Nateque and Dhakal, Subas Prasad and Brown, Kerry and Keast, Robyn and Wiewiora, Anna (2014) Asset management policies and guidelines of different states in Australia: a comparative analysis. Journal of Facilities Management, 12 (3). pp. 286-302. ISSN 1472-5967

Mirzaghorbanali, Ali and Nemcik, Jan and Aziz, Naj (2014) Effects of cyclic loading on the shear behaviour of infilled rock joints under constant normal stiffness conditions. Rock Mechanics and Rock Engineering, 47 (4). pp. 1373-1391. ISSN 0723-2632

Mirzaghorbanali, Ali and Nemcik, Jan and Aziz, Naj (2014) Effects of shear rate on cyclic loading shear behaviour of rock joints under constant normal stiffness conditions. Rock Mechanics and Rock Engineering, 47 (5). pp. 1931-1938. ISSN 0723-2632

Manalo, A. C. and Karunasena, W. and Sirimanna, C. and Maranan, G. (2013) Fibre composites pile rehabilitation and concrete formwork jacket: concept development and finite element analysis. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013): Towards Sustainable Infrastructure with FRP Composites, 11-13 Dec 2013, Melbourne, Australia.

Maranan, G. B. and Manalo, A. C. (2013) Investigation on the mechanical behavior of hybrid fibre reinforced polymer composite beam. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 December 2013, Melbourne, Australia.

Manalo, A. C. (2013) The effect of shear span-to-depth ratio and test set-up on the behavior of fibre composite sandwich structure. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013): Towards Sustainable Infrastructure with FRP Composites, 11-13 Dec 2013, Melbourne, Australia .

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2013) Analysis of a railway turnout system with a spot replacement sleeper. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Manalo, Allan (2013) Fibre reinforced polymer composites sandwich structure: Recent developments and applications in civil infrastructure. In: 2013 International Research Conference on Innovations in Engineering, Science and Technology (IRCIEST 2013), 27-29 Nov 2013, Batangas State University, Batangas, Philippines.

Metcalfe, Patrick James (2013) Evaluation of remotely piloted aircraft in surveying applications. [USQ Project]

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2013) Shear behaviour of glued structural fibre composite sandwich beams. Construction and Building Materials, 47. pp. 1317-1327. ISSN 0950-0618

Madanavosa, Savenaca (2013) The effect of efflorescence on the mechanical properties of geopolymers. [USQ Project]

Manalo, A. and Maranan, G. and Erp, G. V. (2013) Glue-laminated composite sandwich beams for structural engineering and construction. In: 13th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC13), 11-13 Sep 2013, Sapporro, Japan.

Mishra, Krishna and Zhuge, Yan and Karunasena, Karu (2013) Clogging mechanism of permeable concrete: A review. In: Concrete 2013: Understanding Concrete, 16-18 Oct 2013, Gold Coast, Australia.

McDougall, Kevin and Bennett, Rohan and Molen, Paul van der (2013) The global cadastre. GIM International , 27 (7). pp. 30-34. ISSN 1566-9076

Moavenshahidi, Amirali (2013) Estimation of seepage losses from automated irrigation distribution channels during periods of shutdown. [Thesis (PhD/Research)]

N

Nguyen, A. and Kodikara, K. A. T. L. and Chan, T. H. T. and Thambiratnam, D. P. (2018) Toward effective structural identification of medium-rise building structures. Journal of Civil Structural Health Monitoring, 8 (1). pp. 63-75. ISSN 2190-5452

Noon, Jarred (2016) An assessment of the deceleration on horizontal curve component of the Austroads operating speed estimation model. [USQ Project]

Nankervis, Gary A. (2016) Development of a computer simulation for scouring around bridge piers. [USQ Project]

Nguyen, Tin and Ghabraie, Kazem and Tran-Cong, Thanh and Fatahi, Behzad (2016) Improving rockbolt design in tunnels using topology optimisation. International Journal of Geomechanics, 16 (1). ISSN 1532-3641

Nash, Lachlan (2015) A review of warrants for traffic barriers in divided carriageway medians. [USQ Project]

Nguyen, Tin and Ghabraie, Kazem and Tran-Cong, Thanh (2015) Simultaneous pattern and size optimisation of rock bolts for underground excavations. Computers and Geotechnics, 66. pp. 264-277. ISSN 0266-352X

Nguyen, Tin (2015) Using topology optimization in tunnel reinforcement design. [Thesis (PhD/Research)]

Nawi, Nazmi M. and Chen, Guangnan and Jensen, Troy (2014) Prediction of sugarcane quality from juice samples using portable spectroscopy. Journal of Mechanical Engineering and Sciences, 7. pp. 1219-1226. ISSN 2289-4659

Nataatmadja, Andreas (2014) Sub-grade support: a review of short-term and long-term performance requirements. In: 4th International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2014), 19-21 Nov 2014, Brisbane, Australia.

Neumann, Philip M. and Somasundaraswaran, Kathirgamalingam (2014) Evaluation of strength characteristics of recycled asphalt pavement materials. In: 26th Australian Road Research Board Conference (ARRB 2014): Research Driving Efficiency, 19-22 Oct 2014, Sydney, Australia.

Nicol, Lachlan Keith (2014) Behaviour of fibre composite walkways and grating. [USQ Project]

Newman, Matthew (2014) High speed rail in Australia: a case study for a Sydney- Wollongong link. [USQ Project]

Norman, Grant (2014) Investigations into Cambooya’s water supply pressure with respect to local contributing bores. [USQ Project]

Neumann, Philip (2013) Evaluation of the strength characteristics of recycled bituminous pavement materials. [USQ Project]

Ng, Wun Jern and Trzcinski, Antoine and Wang, Chong and Tian, Xinbo (2013) Anaerobic digester feed stream conditioning for increasing biogas production (Technical report 4). Project Report. Unpublished . [Report]

O

Onwude, Daniel I. and Hashim, Norhashila and Abdan, Khalina and Janius, Rimfiel and Chen, Guangnan (2019) The effectiveness of combined infrared and hot-air drying strategies for sweet potato. Journal of Food Engineering, 241. pp. 75-87. ISSN 0260-8774

Onwude, Daniel I. and Hashim, Norhashila and Abdan, Khalina and Janius, Rimfiel and Chen, Guangnan (2018) Combination of computer vision and backscattering imaging for predicting the moisture content and colour changes of sweet potato (Ipomoea batatas L.) during drying. Computers and Electronics in Agriculture, 150. pp. 178-187. ISSN 0168-1699

Onwude, Daniel I. and Hashim, Norhashila and Abdan, Khalina and Janius, Rimfiel and Chen, Guangnan and Kumar, Chandan (2018) Modelling of coupled heat and mass transfer for combined infrared and hot-air drying of sweet potato. Journal of Food Engineering, 228. pp. 12-24. ISSN 0260-8774

Onwude, Daniel I. and Hashim, Norhashila and Abdan, Khalina and Janius, Rimfiel and Chen, Guangnan (2018) Investigating the influence of novel drying methods on sweet potato (Ipomoea batatas L.): Kinetics, energy consumption, color, and microstructure. Journal of Food Process Engineering.

Onwude, Daniel I. and Chen, Guangnan and Hashim, Norhashila and Esdaile, Jeff R. and Gomes, Chandima and Khaled, Alfadhl Y. and Alonge, Akindele F. and Ikrang, Elijah (2018) Mechanization of agricultural production in developing countries. In: Advances in agricultural machinery and technologies. Taylor & Francis (CRC Press), Boca Raton, Florida, United States, pp. 3-26. ISBN 978-1-4987-5412-5

Onwude, Daniel I. and Hashim, Norhashila and Janius, Rimfiel and Abdan, Khalina and Chen, Guangnan and Oladejo, Ayobami O. (2017) Non-thermal hybrid drying of fruits and vegetables: A review of current technologies. Innovative Food Science & Emerging Technologies, 43. pp. 223-238. ISSN 1466-8564

Onwude, Daniel I. and Hashim, Norhashila and Abdan, Khalina and Janius, Rimfiel and Chen, Guangnan (2017) The potential of camera vision, optical backscattered properties and artificial neural network modelling in monitoring the shrinkage of sweet potato (Ipomoea Batatas L.) during drying. Journal of the Science of Food and Agriculture. ISSN 0022-5142

Onwude, Daniel I. and Hashim, Norhashila and Chen, Guangnan (2016) Recent advances of novel thermal combined hot air drying of agricultural crops. Trends in Food Science & Technology, 57 (A). pp. 132-145. ISSN 0968-0020

Ormachea Munoz, Mauricio and Garcia Arostegui, Jose L. and Bhattacharya, Prosun and Sracek, Ondra and Garcia Moreno, Maria E. and Kohfahl, Claus and Quintanilla Aguirre, Jorge and Horner Diaz, Jorge and Bundschuh, Jochen (2016) Geochemistry of naturally occurring arsenic in groundwater and surface-water in the southern part of the Poopo Lake basin, Bolivian Altiplano. Groundwater for Sustainable Development, 2-3. pp. 104-116. ISSN 2352-801X

Olsen, Campbell (2015) Development and execution of asset criticality framework: a study of water and wastewater infrastructure at Toowoomba Regional Council. [USQ Project]

O'Callaghan, Adam (2014) An analysis of roadbase materials used in foamed bitumen stabilisation. [USQ Project]

O'Sullivan, Daniel (2014) Evaluation of precise point positioning services. [USQ Project]

P

Piechocki, Janusz and Sołowiej, Piotr and Neugebauer, Maciej and Chen, Guangnan (2018) Development in energy generation technologies and alternative fuels for agriculture. In: Advances in agricultural machinery and technologies. Taylor & Francis (CRC Press), Boca Raton, Florida, United States, pp. 89-112. ISBN 978-1-4987-5412-5

Peng, Kewen and Tian, Shouceng and Li, Gensheng and Alehossein, Habib (2018) Mapping cavitation impact field in a submerged cavitating jet. Wear, 396–397. pp. 22-33. ISSN 0043-1648

Patay, Istvan and Seres, Istvan and Bundschuh, Jochen (2017) Solar PV for water pumping and irrigation. In: Geothermal, wind and solar energy applications in agriculture and aquaculture. Sustainable Energy Developments. Taylor & Francis (CRC Press), Leiden, Netherlands, pp. 213-234. ISBN 978-1-138-02970-5

Pettersson, Declan (2016) 3D hydrologic features mapping with imaging rover. [USQ Project]

Priest, Andrew James (2016) Development of stormwater asset management plan for local council. [USQ Project]

Peng, Zhuohao (2016) Geodesic dome structural analysis and design. [USQ Project]

Petersen, David (2016) Studying the effects of non-uniform stress distributions on soil heave. [USQ Project]

Poulton, Ashley (2016) The effect of resurfacing on the lateral resistance of narrow gauge low profile concrete sleepers. [USQ Project]

Pease, Adam (2016) The impacts construction traffic has on pavements within residential subdivisions. [USQ Project]

Perera, Kithsiri and Tateishi, Ryutaro and Herath, Srikantha (2015) Assisting mitigation of bushfire threat in regional Australia through MODIS imagery based media GIS. In: 23rd CEReS International Symposium, the 18th Symposium on Environment Remote Sensing, the 3rd Symposium on Microsatellites for Remote Sensing 2015, 1-2 Dec 2015, Chiba, Japan.

Pearson, Kelly (2015) Feasibility of improved traffic flow on Cohoe Street, Toowoomba by intersection improvements. [USQ Project]

Pathiranage, Thilini (2015) Analysis of bridge failure due to Cyclone Marcia in Central Queensland using fault tree method. [USQ Project]

Patterson, Melanie (2015) Building Information Modelling: an explorative study. [USQ Project]

Price, David (2015) Sustainable road development and management. [USQ Project]

Paul, Gregory (2015) An evaluation of traffic calming devices for major highways passing through rural Australian communities. [USQ Project]

Pescod, Rhys (2015) Improvements to the calibration of Electronic Distance Measurement Equipment (EDME). [USQ Project]

Purvis, Alan (2015) An investigative study of road construction contract variations. [USQ Project]

Porter, Simon (2015) Analysing geotechnical aspects of concrete pipe culverts. [USQ Project]

Peng, Youkai and Wu, Hui and Zhuge, Yan (2015) Strength and drift capacity of squat recycled concrete shear walls under cyclic loading. Engineering Structures, 100. pp. 356-368. ISSN 0141-0296

Pathirana, Sumith and Perera, Kithsiri and Sanaa, Hobeichi (2015) Impact of climate change on water resources in MENA countries: an assessment of temporal changes of land cover/land use and water resources using multi-temporal MODIS and Landsat data and GIS techniques. In: International Symposium on Remote Sensing (ISRS 2015), 22-24 April 2015, Tainan, Taiwan.

Peake, Allan Stewart (2015) Improving water productivity of irrigated wheat in the northern grain production region of Australia. [Thesis (PhD/Research)]

Paudyal, D. R. and McDougall, K. and Apan, A. (2014) The impact of varying statutory arrangements on spatial data sharing and access in regional NRM bodies. ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, II-8. pp. 193-197. ISSN 2194-9042

Perera, Kithsiri and Tateishi, Ryutaro (2014) MODIS data based semi-real time media GIS contents to support natural disaster mitigation. International Journal of Multidisciplinary Studies, 1 (2).

Perera, Kithsiri and Herath, Srikantha and Tateishi, Ryutaro (2014) Assessing land use of lower Mekong basin using multi-temporal MODIS imagery. In: 57th Autumn Conference of the Remote Sensing Society of Japan (RSSJ 2014), 6-7 Nov 2014, Kyoto, Japan.

Power, Scott (2014) The affect of lighting interchange ramps on safety – a study of the M1. [USQ Project]

Perera, Kithsiri and Herath, Srikantha and Tateishi, Ryutaro (2013) Mapping Mekong River Basin land cover to support food production. In: 55th Autumn Conference of the Remote Sensing Society of Japan, 21-22 Nov 2013, Fukushima, Japan.

Paudyal, Dev Raj and McDougall, Kevin and Apan, Armando (2013) Developing spatial information sharing strategies across natural resource management communities. In: Spatial Enablement in Support of Economic Development and Poverty Reduction: Research, Development and Education Perspectives. GSDI Association Press, Needham, MA, USA, pp. 141-168. ISBN 978-0-9852444-2-2

Q

Qin, Zongyi and Alehossein, Habib (2016) Heat transfer during cavitation bubble collapse. Applied Thermal Engineering, 105. pp. 1067-1075. ISSN 1359-4311

Qi, Haixia and Banhazi, Thomas M. and Zhang, Zhigang and Low, Tobias and Brookshaw, Iain J. (2016) Preliminary laboratory test on navigation accuracy of an autonomous robot for measuring air quality in livestock buildings. International Journal of Agricultural and Biological Engineering, 9 (2). pp. 29-39. ISSN 1934-6344

R

Rioyo, Javier and Aravinthan, Vasantha and Bundschuh, Jochen and Lynch, Mark (2018) Research on ‘high-pH precipitation treatment’ for RO concentrate minimization and salt recovery in a municipal groundwater desalination facility. Desalination, 439 . pp. 168-178. ISSN 0011-9164

Rioyo, Javier and Aravinthan, Vasantha and Bundschuh, Jochen and Lynch, Mark (2018) ‘High-pH softening pretreatment’ for boron removal in inland desalination systems. Separation and Purification Technology, 205. pp. 308-316. ISSN 1383-5866

Roslan, N. and Ya'acob, M. E. and Radzi, M. A. M. and Hashimoto, Y. and Jamaludin, D. and Chen, G. (2018) Dye Sensitized Solar Cell (DSSC) greenhouse shading: new insights for solar radiation manipulation. Renewable and Sustainable Energy Reviews, 92. pp. 171-186. ISSN 1364-0321

Reddy, R. Muni Rami and Karunasena, W. and Lokuge, W. (2018) Free vibration of functionally graded-GPL reinforced composite plates with different boundary conditions. Aerospace Science and Technology, 78. pp. 147-156. ISSN 1270-9638

Rashid, Md. Mamunur and Beecham, Simon and Chowdhury, Resaul Kabir (2017) Simulation of extreme rainfall and projection of future changes using the GLIMCLIM model. Theoretical and Applied Climatology, 130 (1-2). pp. 453-466. ISSN 0177-798X

Rioyo, Javier and Aravinthan, Vasantha and Bundschuh, Jochen and Lynch, Mark (2017) A review of strategies for RO brine minimization in inland desalination plants. Desalination and Water Treatment, 90. pp. 110-123. ISSN 1944-3994

Rasekh, Haleh and Aziz, Naj and Mirzaghorbanali, Ali and Nemcik, Jan and Li, Xuwei and Yang, Guanyu and Khaleghparast, Saman (2017) Double shear testing of cable bolts with no concrete face contacts. Procedia Engineering, 191. pp. 1169-1177.

Rasekh, Haleh and Mirzaghorbanali, Ali and Nemcik, Jan and Aziz, Naj and Li, Xuwei (2017) A new equation for the shear strength of cable bolts incorporating the energy balance theory. Geotechnical and Geological Engineering, 35 (4). pp. 1529-1548. ISSN 0960-3182

Rasappagari, Muni R. R. and Zhuge, Y. (2017) Developing towards best natural fibre composite for structural applications—a review. In: 24th Australasian Conference on the Mechanics of Structures and Materials: Advancements and Challenges (ACMSM24), 6-9 Dec 2016, Perth, Australia.

Roberton, Stirling and Bennett, John McL. (2017) Efficacy of delaying cotton defoliation to mitigate compaction risk at wet harvest. Crop and Pasture Science, 68 (5). pp. 466-473. ISSN 1836-0947

Redding, Bradley (2016) 3D modelling for surveying projects using unmanned arial vehicles (UAVs) and laser scanning. [USQ Project]

Richardson, Megan (2016) Analysis of road crashes at roundabouts in Toowoomba. [USQ Project]

Rusconi, Luke (2016) Analysis of steady state vs dynamic modelling of groundwater mounding in development areas in WA. [USQ Project]

Robertson, Thomas (2016) Application of MODIS and Google earth data to assess the health of the Mitchell grasslands through web based GIS. [USQ Project]

Richardson, Joseph (2016) Improving the transition of a successful tender from estimating to project management phases. [USQ Project]

Rosnell, Alexander (2016) Investigating design and construction issues for precast concrete bridge over Bookookoorara creek. [USQ Project]

Russell, Stephen (2016) Review of shared zones as a solution to grade and space restrictive residential streets. [USQ Project]

Roberts, David (2016) The effects of control point shape and distribution in the creation of a numeric cadastral data base. [USQ Project]

Rashid, Md. Mamunur and Beecham, Simon and Chowdhury, Rezaul Kabir (2016) Statistical downscaling of rainfall: a non-stationary and multi-resolution approach. Theoretical and Applied Climatology, 124 (3-4). pp. 919-933. ISSN 0177-798X

Rasekh, Haleh and Mirza, Ali and Aziz, Naj and Nemcik, Jan and Li, Xuwei (2016) Modelling simulation of the performance of cable bolts in shear. In: 2016 Coal Operators' Conference, 10-12 Feb 2016, Wollongong, Australia.

Rizzo, Giuseppe Ferdinando (2015) Use of biochar geostructures for urban stormwater water cleanup. [USQ Project]

Raleigh, Andrew (2015) How to mitigate the effects of scour on bridge piers through the use of combined countermeasures. [USQ Project]

Robinson, Adam (2015) A study into the behaviour of FRP bolted connections. [USQ Project]

Rashid, Md. Mamunur and Beecham, Simon and Chowdhury, Rezaul K. (2015) Statistical downscaling of CMIP5 outputs for projecting future changes in rainfall in the Onkaparinga catchment. Science of the Total Environment, 530-531. pp. 171-182. ISSN 0048-9697

Robertson, Matthew (2015) Circular geopolymer concrete columns with composite rebars. [USQ Project]

Roberton, Stirling (2015) Managing field moisture to reduce the soil compaction risk at cotton harvest. [USQ Project]

Rashid, Md. Mamunur and Beecham, Simon and Chowdhury, Rezaul Kabir (2015) Assessment of trends in point rainfall using Continuous Wavelet Transforms. Advances in Water Resources, 82. pp. 1-15. ISSN 0309-1708

Rashid, M. Mamunur and Beecham, Simon and Chowdhury, Rezaul K. (2015) Statistical characteristics of rainfall in the Onkaparinga catchment in South Australia. Journal of Water and Climate Change, 6 (2). pp. 352-373. ISSN 2040-2244

Rosas, Angela Beatriz Rodriques (2014) Experimental investigation on the alkali silica reaction effect on concrete strength degradation. [USQ Project]

Rashid, Md Mamunur and Beecham, Simon and Chowdhury, Rezaul Kabir (2014) Influence of climate drivers on variability and trends in seasonal rainfall in the Onkaparinga catchment in South Australia: a wavelet approach. In: 13th International Conference on Urban Drainage (ICUD) 2014, 7-12 Sept 2014, Sarawak, Malaysia.

Rashid, Md Mamunur and Beecham, Simon and Chowdhury, Rezaul Kabir (2014) Selection of predictors for statistical downscaling using wavelet techniques. In: 13th International Conference on Urban Drainage (ICUD) 2014, 7-12 Sept 2014, Sarawak, Malaysia.

Reed, Mark and Lokuge, Weena and Karunasena, Warna (2014) Fibre reinforced geopolymer concrete with ambient curing for in-situ applications. Journal of Materials Science, 49 (12). pp. 4297-4304. ISSN 0022-2461

Reynolds, Peter William (2013) Engineering correlations for the characterisation of reactive soil behaviour for use in road design. [USQ Project]

S

Shiau, Jim and Sams, Mathew (2019) Relating volume loss and greenfield settlement. Tunnelling and Underground Space Technology, 83. pp. 145-152. ISSN 0886-7798

Shiau, Jim and Al-Asadi, Fadhil (2018) Revisiting Broms and Bennermarks’ original stability number for tunnel headings. Geotechnique Letters, 8 (4).

Scarmana, Gabriel and McDougall, Kevin (2018) A convolution-deconvolution method for improved storage and communication of remotely-sensed image data. In: 11th SPIE Asia-Pacific Remote Sensing Symposium 2018: Multispectral, Hyperspectral, and Ultraspectral Remote Sensing Technology, Techniques and Applications VII, 24-26 Sept 2018, Honolulu, Hawaii, United States.

Smith, R. J. and Uddin, M. J. and Gillies, M. H. (2018) Estimating irrigation duration for high performance furrow irrigation on cracking clay soils. Agricultural Water Management, 206. pp. 78-85. ISSN 0378-3774

Shelke, Mayur and Abeysekera, Vasantha (2018) Biological cell surveillance: implication on construction cell. In: 10th International Conference on Construction in the 21st Century (CITC-10) , 2-4 July 2018, Colombo, Sri Lanka.

Soheili-Fard, Farshad and Kouchaki-Penchah, Hamed and Ghasemi Nejad Raini, Mahmoud and Chen, Guangnan (2018) Cradle to grave environmental-economic analysis of tea life cycle in Iran. Journal of Cleaner Production, 196. pp. 953-960. ISSN 0959-6526

Shiau, Jim and Sams, Mathew and Al-Asadi, Fadhil and Mirza Hassan, Mohammad (2018) Stability charts for unsupported plane strain tunnel headings in homogeneous undrained clay. International Journal of GEOMATE, 14 (41). pp. 19-26. ISSN 2186-2982

Suarez Cadavid, Luz Angelica (2018) Proximal and remote sensing for early detection and assessment of herbicide drift damage on cotton crops. [Thesis (PhD/Research)]

Sandanayake, Malindu and Lokuge, Weena and Zhang, Guomin and Setunge, Sujeeva and Thushar, Quddus (2017) Greenhouse gas emissions during timber and concrete building construction - a scenario based comparative case study. Sustainable Cities and Society , 38. pp. 91-97. ISSN 2210-6707

Shiau, Jim and Sams, Mathew (2017) Estimation of tunneling induced ground settlement using pressure relaxation method. International Journal of GEOMATE, 13 (39). pp. 132-139. ISSN 2186-2982

Shiau, Jim and Lamb, Brian and Sams, Mathew and Lobwein, Jay (2017) Stability charts for unsupported circular tunnels in cohesive soils. International Journal of GEOMATE, 13 (39). pp. 95-102. ISSN 2186-2982

Scarmana, G. (2017) Image fusion and enhancement using triangulated irregular networks. In: Videometrics, Range Imaging and Applications XIV Conference , 26-29 June 2017, Munich, Germany.

Sussanna, Vittorio and Janssen, Volker and Gibbings, Peter (2017) Performance of AUSGeoid09 in mountainous regions. In: 22nd Association of Public Authority Surveyors Conference (APAS2017) , 20-22 March 2017, Shoal Bay, New South Wales, Australia.

Shelke, Mayur and Abeysekera, Vasantha (2017) Biological cell theory based interventions and the impact on quality: the case of a tower project. In: 9th International Conference on Construction in the 21st Century: Revolutionizing the Architecture, Engineering and Construction Industry through Leadership, Collaboration and Technology (CITC-9), 5-7 March 2017, Dubai, United Arab Emirates.

Shelke, Mayur and Abeysekera, Vasantha (2017) Understanding the relevance of biological cell control theory and cell control mechanism for solving quality problems in a tunnel construction project. In: 9th International Conference on Construction in the 21st Century: Revolutionizing the Architecture, Engineering and Construction Industry through Leadership, Collaboration and Technology (CITC-9), 5-7 March 2017, Dubai, United Arab Emirates.

Sattary, Sattar (2017) Sustainable construction: potential carbon emission reductions (PCER) in Australian construction systems through the use of bioclimatic design principles. [Thesis (PhD/Research)]

Schmidt, Stefan-Andre and Gukelberger, Ephraim and Hermann, Mario and Fiedler, Florian and Grossmann, Benjamin and Hoinkis, Jan and Ghosh, Ashok and Chatterjee, Debashis and Bundschuh, Jochen (2016) Pilot study on arsenic removal from groundwater using a small-scale reverse osmosis system — towards sustainable drinking water production. Journal of Hazardous Materials, 318. pp. 671-678. ISSN 0304-3894

Stainwall, Haren (2016) Analysis of culverts during extreme flood events. [USQ Project]

Sutcliffe, Wayne (2016) Design of a truss bridge for low cost using structural topology optimisation. [USQ Project]

Suarez, L. A. and Apan, Armando and Werth, Jeff (2016) Hyperspectral sensing to detect the impact of herbicide drift on cotton growth and yield. ISPRS Journal of Photogrammetry and Remote Sensing, 120. pp. 65-76. ISSN 0924-2716

Smith, Benjamin James (2016) Identifying best practice pavement design for an unsealed road network to achieve sustainability improvements. [USQ Project]

Shrestha, Suman (2016) Study of effects of coarse grain contents on Atterberg limits and expansiveness of the clay. [USQ Project]

Skehan, Ned (2016) Towards two-dimensional infiltration measurement in complex and variable soil environments. [USQ Project]

Smith, Cameron (2016) Utilisation of rice husk ash and fly ash as a partial replacement for cement in self-consolidating concrete. [USQ Project]

Shahid, Muhammad Ammad and Mahmood, Muhammad Nateque and Das, Narottam (2016) Integrated asset management framework for Australian wind farms. In: 26th Australasian Universities Power Engineering Conference (AUPEC 2016), 25-28 Sept 2016, Brisbane, Australia .

Scarmana, Gabriel and McDougall, Kevin (2016) An application of space filling curves to digital terrain models. In: XVI International Congress for Mine Surveying: Connecting Education and Industry, 12-16 Sept 2016, Brisbane, Australia.

Scarmana, Gabriel (2016) An application of the least squares plane fitting interpolation process to image reconstruction and enhancement. In: 78th FIG Working Week 2016: Recovering from Disaster, 2-6 May 2016, Christchurch, New Zealand.

Shiau, Jim and Sams, Mathew and Chen, Jing (2016) Stability charts for a tall tunnel in undrained clay. International Journal of GEOMATE, 10 (20). 1764-1769 . ISSN 2186-2982

Serati, Mehdi and Alehossein, Habib and Erarslan, Nazife (2016) The Brazilian disc test under a non-uniform contact pressure along its thickness. Rock Mechanics and Rock Engineering, 49 (4). pp. 1573-1577. ISSN 0723-2632

Shiau, Jim and Lamb, Brian and Sams, Mathew (2016) The use of sinkhole models in advanced geotechnical engineering teaching. International Journal of GEOMATE, 10 (20). 1718-1724 . ISSN 2186-2982

Sattary, Sattar and Thorpe, David (2016) Potential carbon emission reductions in Australian construction systems through bioclimatic principles. Sustainable Cities and Society, 23. pp. 105-113. ISSN 2210-6707

Shiau, Jim and Sams, Mathew and Lamb, Brian (2016) Introducing advanced topics in geotechnical engineering teaching - tunnel modelling. International Journal of GEOMATE, 10 (19). 1698-1705 . ISSN 2186-2982

Serati, Mehdi and Alehossein, Habib and Williams, David J. (2016) Theoretical treatment of disc cutters subjected to general cutting forces. Journal of Engineering Mathematics, 100 (1). pp. 1-25. ISSN 0022-0833

Schneider, Jerusa and Bundschuh, Jochen and do Nascimento, Clístenes Williams Araújo (2016) Arbuscular mycorrhizal fungi-assisted phytoremediation of a lead-contaminated site. Science of the Total Environment, 572. pp. 86-97. ISSN 0048-9697

Somasundaraswaran, Kathirgamalingam (2016) Experience in the delivery of an engineering capstone design course for Associate Degree program at the University of Southern Queensland. Asia Pacific Journal of Contemporary Education and Communication Technology, 2 (3). pp. 64-73. ISSN 2205-6181

Sams, Mathew S. (2016) Numerical investigation of stability and settlement of tunnels in undrained clay. [Thesis (PhD/Research)]

Shiau, Jim and Sams, Mathew and Chen, Jing (2016) Stability design charts for unsupported wide rectangular tunnels. International Journal of GEOMATE, 21 (01). pp. 139-150. ISSN 1089-3032

Sirimanna, C. S. and Banerjee, S. and Karunasena, W. and Manalo, A. C. and McGarva, L. (2015) Analysis of retrofitted corroded steel pipes using internally bonded FRP composite repair systems. Australian Journal of Structural Engineering , 16 (3). pp. 187-198. ISSN 1328-7982

Somasundaraswaran, Kathirgamalingam and Russell, Lauren (2015) Analysis of road crashes at roundabout in Toowoomba. In: Conference of ASEAN Road Safety (CARS2015), 3-6 Nov 2015, Kuala Lumpur, Malaysia.

Smith, Mitchell (2015) Southeast Queensland storm tide response to ex tropical cyclone Oswald. [USQ Project]

Strack, Anita Leigh (2015) A review on Australian mine haul road design procedures. [USQ Project]

Sparksman, Peter John (2015) Quantifying the time and cost associated with the Request for Information (RFI) OR Technical Query (TQ) process - a designers perspective. [USQ Project]

Salonen, Marcus (2015) Prediction of timber bridge girder strength and stiffness using stress wave analysis. [USQ Project]

Smeaton, Curtis (2015) Surveying applications of photogrammetric UAVs - a comparison with conventional survey techniques. [USQ Project]

Scarmana, Gabriel (2015) Digital image blurring-deblurring process for improved storage and transmission. In: IEEE International Geoscience and Remote Sensing Symposium 2015 (IGARSS 2015): Remote Sensing: Understanding the Earth for a Safer World, 26-31 July 2015, Milan, Italy.

Scarmana, Gabriel and McDougall, Kevin (2015) Exploring the application of some common raster scanning paths on lossless compression of elevation images. In: IEEE International Geoscience and Remote Sensing Symposium 2015 (IGARSS 2015): Remote Sensing: Understanding the Earth for a Safer World, 26-31 July 2015, Milan, Italy.

Sirimanna, C. S. and Manalo, A. C. and Karunasena, W. and Banerjee, S. and McGarva, L. (2015) Fibre-reinforced polymer (FRP) repair systems for corroded steel pipelines. In: Rehabilitation of pipelines using fibre-reinforced polymer (FRP) composites. Woodhead Publishing Series in Civil and Structural Engineering (52). Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 267-285. ISBN 978-0-85709-684-5

Serati, Mehdi and Alehossein, Habib and Williams, David J. (2015) Estimating the tensile strength of superhard brittle materials using truncated spheroidal specimens. Journal of the Mechanics and Physics of Solids, 78. pp. 123-140. ISSN 0022-5096

Saxby, Ian Michael (2015) Regulating rescue package descent through controlled autorotation. [USQ Project]

Shiau, Jim and Buttling, Stephen and Sams, Mathew (2015) Developing a project based learning assignment for geotechnical engineering. Electronic Journal of Geotechnical Engineering, 20 (18). pp. 10113-10121.

Sahib, Basheer Abdulameer (2015) Modelling flash flood using LiDAR and high resolution satellite imagery: a case study of West Creek, Toowoomba. [Thesis (PhD/Research)]

Symes, Mark and Allison, Janelle and Dowling, David and Ranmuthugala, Dev (2014) Engineering pathways for regional Australia built through knowledge partnering. In: 25th Annual Conference of the Australasian Association for Engineering Education: Engineering the Knowledge Economy: Collaboration, Engagement & Employability, 7-10 Dec 2014, Wellington, New Zealand.

Scarmana, Gabriel and McDougall, Kevin (2014) A pyramid approach to lossless data compression of grid-based digital elevation models. In: IEEE International Geoscience and Remote Sensing Symposium 2014 (IGARSS 2014): Energy and our Changing Planet, 13-18 July 2014, Quebec City, Canada.

Sweeney, Juliana (2014) Topological optimisation of large reinforced concrete box culverts under SM1600 loads. [USQ Project]

Sheridan, Liam (2014) Aquaplaning: an investigation of surface flow calculation. [USQ Project]

Surendar, Swetha (2014) Flexural behaviour of sandwich panels under elevated temperature. [USQ Project]

Seccombe, Kieran Robert (2014) Numerical modelling of mining subsidence. [USQ Project]

Stager, Martin Franz (2014) The impact of compact urban form on the provision of public road transport. [USQ Project]

Sahib, Basheer and Liu, Xiaoye and McDougall, Kevin (2014) Flood inundation mapping using hydraulic modelling and GIS: a case study in the West Creek sub-catchment. In: 3rd National Conference on Urban Water Management: Storm water 2014 , 13-17 Oct 2014, Adelaide, South Australia.

Simmons, S. (2014) The assessment of overseas qualifications against the requirements for registration as a surveyor. In: QCON 14: Repositioning for a Sustainable Future, 7-10 Oct 2014, Cairns, Australia.

Single, John H. (2014) Cost effective pavement reconstruction or rehabilitation profile(s) in Townsville. [USQ Project]

Sanders, Thomas (2014) Effective road pavement rehabilitation design for local government roads within the Sunshine Coast region. [USQ Project]

Stanton, Vernon (2014) Investigation of the effect of positive and negative crossfalls on road safety at roundabouts. [USQ Project]

Setunge, Sujeeva and Lokuge, Weena and Mohseni, Hessam and Karunasena, Warna (2014) Vulnerability of road bridge infrastructure under extreme flood events. In: AFAC and Bushfire and Natural Hazards CRC Conference 2014, 2-5 Sept 2014, Wellington, New Zealand.

Sussanna, Vittorio and Janssen, Volker and Gibbings, Peter (2014) Absolute performance of AUSGeoid09 in mountainous regions. Journal of Applied Geodesy, 8 (3). pp. 195-204. ISSN 1862-9016

Shiau, J. S. and Sams, M. S. and Kemp, R. J. (2014) Physical modelling and PIV analyses of an underground tunnel heading. In: 8th International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground (TC204 ISSMGE IS-SEOUL 2014) , 25-27 Aug 2014, Seoul, Korea.

Shiau, J. S. and Sams, M. S. and Zhang, J. and Kemp, R. J. (2014) Settlement analyses of underground circular tunneling in soft clay. In: 8th International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground (TC204 ISSMGE IS-SEOUL 2014) , 25-27 Aug 2014, Seoul, South Korea.

Scarmana, G. (2014) Lossless data compression of grid-based digital elevation models: a PNG image format evaluation. In: ISPRS Technical Commission V Symposium. Close-range imaging, ranging and applications , 23-25 Jun 2014, Riva del Garda, Italy.

Sherif, Mohsen and Chowdhury, Rezaul and Shetty, Ampar (2014) Rainfall and intensity-duration-frequency (IDF) curves in United Arab Emirates. In: World Environmental and Water Resources Congress 2014: Water without Boarders, 1-5 June 2014, Oregon, United States of America.

Sherif, Mohsen and Almulla, Mohamed and Shetty, Ampar and Chowdhury, Rezaul K. (2014) Analysis of rainfall, PMP and drought in the United Arab Emirates. International Journal of Climatology, 34 (4). pp. 1318-1328. ISSN 0899-8418

Sirimanna, C. S. and Karunasena, W. and Manalo, A. C. and Banerjee, S. and McGarva, L. (2013) Analysis of internal bonded fibre reinforced composite repair systems for corroded steel pipelines. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 Dec 2013, Melbourne, Australia .

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak (2013) Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines. Materials and Design, 52. pp. 315-327. ISSN 0264-1275

Stanley, Thomas (2013) Assessment of the FARO 3D focus laser scanner for forest inventory. [USQ Project]

Sussanna, Vittorio (2013) AUSGeoid09 performance in mountainous regions. [USQ Project]

Savage, Andrew (2013) Brisbane City Council strategic planning: delivery of sustainable transport. [USQ Project]

Sebby, Melcuam (2013) Evaluation of roads safety processes currently used in Queensland. [USQ Project]

Serra, Michael Peter (2013) Geotechnical stability analysis using student versions of FLAC, PLAXIS and SLOPE/W. [USQ Project]

Sams, Mathew Steven (2013) Numerical and physical modelling of a 2D tunnel heading at collapse. [USQ Project]

Spilsbury-Brinkmann, Casey (2013) The economic feasibility of upgrading Moree’s light industrial area to legally cater for restricted access vehicles. [USQ Project]

Smith, Wesley (2013) The role of private enterprise in transforming the water, sanitation and hygiene sector in rural sub-Saharan Africa. [USQ Project]

Spurling, Harrison (2013) Water sensitive urban design for sustainable road development. [USQ Project]

T

Taki, Morteza and Soheili-Fard, Farshad and Rohani, Abbas and Chen, Guangnan (2018) Life cycle assessment to compare the environmental impacts of different wheat production systems. Journal of Cleaner Production, 197 (1). pp. 195-207. ISSN 0959-6526

Tian, Xinbo and Ng, Wun Jern and Trzcinski, Antoine P. (2018) Optimizing the synergistic effect of sodium hydroxide/ultrasound pre-treatment of sludge. Ultrasonics Sonochemistry, 48. pp. 432-440. ISSN 1350-4177

Tian, Xinbo and Trzcinski, Antoine (2018) Effects of physico-chemical post-treatments on the semi-continuous anaerobic digestion of sewage sludge. In: Advances in environmental engineering. Environments. MDPI, Basel, Switzerland, pp. 22-33. ISBN 978-3-03897-001-9

Trzcinski, Antoine P. and Stuckey, David C. (2018) Microbial biomethane from solid waste: biotechnological process. In: Microbial fuels: technologies and applications. Taylor & Francis (CRC Press), Boca Raton, FL, United States, pp. 77-151. ISBN 9781498763790

Taheri, Adel and Sereshki, Farhang and Ardejani, Faramarz Doulati and Mirzaghorbanali, Ali (2017) Simulation of macerals effects on methane emission during gas drainage in coal mines. Fuel, 210. pp. 659-665. ISSN 0016-2361

Trzcinski, Antoine (2017) Biofuels from food waste: applications of saccharification using fungal solid state fermentation. Taylor & Francis (CRC Press), United States. ISBN 9781138093720

Trzcinski, Antoine P. (2017) Biological treatment of leachate in a submerged anaerobic membrane bioreactor. In: Leachates: biological treatment, toxicological characteristics and potential impacts on the environment. Environmental Research Advances. Nova Science Publishers, New York, United States, pp. 1-122. ISBN 978-1-53612-508-5

Tian, Xinbo and Trzcinski, Antoine (2017) Effects of physico-chemical post-treatments on the semi-continuous anaerobic digestion of sewage sludge. Environments, 4 (3). ISSN 2076-3298

Trzcinski, Antoine Prandota and Wang, Chong and Zhang, Dongqing and Ang, Wui Seng and Lin, Li Leonard and Niwa, Terutake and Fukuzaki, Yasuhiro and Ng, Wun Jern (2017) Performance of A-stage process treating combined municipal-industrial wastewater. Water Science & Technology, 75 (1). pp. 228-238. ISSN 0273-1223

Thorpe, David (2016) Experiential learning approaches for developing professional skills in postgraduate engineering students. In: International Conference on Engineering Education and Research (ICEER 2016), 21-24 November 2016, Sydney, Australia.

Tian, Xinbo and Trzcinski, Antoine Prandota and Lin, Leonard Li and Ng, Wun Jern (2016) Enhancing sewage sludge anaerobic 're-digestion' with combinations of ultrasonic, ozone and alkaline treatments. Journal of Environmental Chemical Engineering, 4 (4). pp. 4801-4807.

Tobler, Jake and Nataatmadja, Andreas (2016) Verification of Austroads concrete pavement design method using EverFE computer program. In: 27th ARRB Conference (2016), 16-18 Nov 2016, Melbourne, Australia.

Taheri, Adel and Sereshki, Farhang and Ardejani, Faramarz Doulati and Mirzaghorbanali, Ali (2016) Numerical modeling of gas flow in coal pores for methane drainage. Journal of Sustainable Mining, 15. pp. 95-99. ISSN 2300-3960

Trzcinski, Antoine Prandota and Ganda, Lily and Kunacheva, Chinagarn and Zhang, Dong Qing and Lin, Li Leonard and Tao, Guihe and Lee, Yingjie and Ng, Wun Jern (2016) Characterization and biodegradability of sludge from a high rate A-stage contact tank and B-stage membrane bioreactor of pilot-scale AB system treating municipal wastewaters. Water Science and Technology, 74 (7). pp. 1716-1725. ISSN 0273-1223

Tippett-Whiteman, Austin (2016) Integrating scheduling with quality to minimise defects in construction. [USQ Project]

Thompson, Zaine (2016) Integration of Trimble V10 imaging rover with R10 GNSS receiver for data collection under dense tree canopies. [USQ Project]

Taylor, David (2016) Modelling supply channel seepage and analysing the effectiveness mitigation options. [USQ Project]

Trzcinski, Antoine Prandota and Ganda, Lily and Ni, Annie Soh Yan and Kunacheva, Chinagarn and Zhang, Dong Qing and Lin, Li Leonard and Tao, Guihe and Lee, Yingjie and Ng, Wun Jern (2016) Identification of recalcitrant compounds in a pilot-scale AB system: an adsorption (A) stage followed by a biological (B) stage to treat municipal wastewater. Bioresource Technology , 206. pp. 121-127. ISSN 0960-8524

Trzcinski, Antoine P. and Stuckey, David C. (2016) Inorganic fouling of an anaerobic membrane bioreactor treating leachate from the organic fraction of municipal solid waste (OFMSW) and a polishing aerobic membrane bioreactor. Bioresource Technology, 204. pp. 17-25. ISSN 0960-8524

Thorp, Stuart Bruce (2016) A generic multimedia configuration management system for constrained spatial user-interface design. [Thesis (PhD/Research)]

Trzcinski, A. (2016) Anaerobic digestion design decision tool with economic analysis (NPV). [Computer Program]

Thorpe, David (2015) Reflections on developing and implementing an advanced engineering project management course. In: 26th Annual Conference of the Australasian Association for Engineering Education (AAEE 2015), 6-9 Dec 2015, Geelong, Victoria, Australia.

Tian, Xinbo and Wang, Chong and Trzcinski, Antoine Prandota and Lin, Leonard and Ng, Wun Jern (2015) Interpreting the synergistic effect in combined ultrasonication-ozonation sewage sludge pre-treatment. Chemosphere, 140. pp. 63-71. ISSN 0045-6535

Tunnah, Patrick (2015) Diversion of stormwater first flush: an alternative method of managing pollution to urban waterways. [USQ Project]

Timms, Ashlii (2015) Effects of elevated temperature and simulated environmental conditions on the properties of epoxy based polymer resin. [USQ Project]

Tobler, Jake P (2015) Evaluation of EverFE software for designing Australian concrete pavements. [USQ Project]

Tian, Xinbo and Trzcinski, Antoine Prandota and Lin, Li leonard and Ng, Wun Jern (2015) Impact of ozone assisted ultrasonication pre-treatment on anaerobic digestibility of sewage sludge. Journal of Environmental Sciences, 33. pp. 29-38. ISSN 1001-0742

Trzcinski, Antoine P. and Stuckey, David C. (2015) Contribution of acetic acid to the hydrolysis of lignocellulosic biomass under abiotic conditions. Bioresource Technology, 185. pp. 441-444. ISSN 0960-8524

Tian, Xinbo and Wang, Chong and Trzcinski, Antoine Prandota and Lin, Leonard and Ng, Wun Jern (2015) Insights on the solubilization products after combined alkaline and ultrasonic pre-treatment of sewage sludge. Journal of Environmental Sciences (China), 29. pp. 97-105. ISSN 1001-0742

Trzcinski, Antoine Prandota and Tian, Xinbo and Wang, Chong and Lin, Leonard Li and Ng, Wun Jern (2015) Combined ultrasonication and thermal pre-treatment of sewage sludge for increasing methane production. Journal of Environmental Science and Health - Part A Toxic Hazardous Substances and Environmental Engineering, 50 (2). pp. 213-223. ISSN 1093-4529

Tabatabaiefar, Hamid Reza and Fatahi, Behzad and Ghabraie, Kazem and Zhou, Wan-Huan (2015) Evaluation of numerical procedures to determine seismic response of structures under influence of soil-structure interaction. Structural Engineering and Mechanics, 56 (1). pp. 27-47. ISSN 1225-4568

Tomasel, Aden (2014) The energy storage potential of a hybrid renewable generation grid connected to a pumped hydro-generation plant for effective connection into the energy market, off peak switchable developing load demand market and act as ancillary regional voltage support and bulk water supply. [USQ Project]

Topp, Michael James (2014) LiDAR data for DEM generation and flood plain mapping. [USQ Project]

Trzcinski, A. and Tian, X. and Lin, L. and Guo, Z. H. and Zhou, Y. and Ng, Wun Jern (2014) Sludge pretreatment methods for enhanced VS destruction and CH4 production. In: Wastewater and Biosolids Treatment and Reuse (WBTR2014): Bridging modelling and experimental studies, 8-14 June 2014, Otranto (Lecce), Italy.

Thota, Narasimha and Epaarachchi, Jayantha and Lau, Kin-Tak (2014) Development and validation of a thorax surrogate FE model for assessment of trauma due to high speed blunt impacts. Journal of Biomechanical Science and Engineering, 9 (1). 08-1. ISSN 1880-9863

Trzcinski, A. and Ng, W. J. (2014) Biomass & biogas developments in Singapore. In: Biomass & Biogas Opportunities Seminar 2014, 20 Mar 2014, Singapore.

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2014) A study into the characteristics of gomuti (Arenga pinnata) fibre for usage as natural fibre composites. Journal of Reinforced Plastics and Composites, 33 (2). pp. 179-192. ISSN 0731-6844

Tian, Xinbo and Trzcinski, Antoine Prandota and Ng, Wun Jern (2013) Feasibility of coupling ultrasound with chemical methods for sludge pre-treatment. In: Postgraduate Workshop, 25 Nov 2013, Darmstadt, Germany.

Trzcinski, Antoine P. and Ng, Wun Jern (2013) Industrial wastewater treatment process. In: 4th Global Ethanol Focus 2013: Sustainable Cooperation and Development Focus on Ethanol, 4-5 Sept 2013, Singapore.

Taylor, Benjamin Allan (2013) Dual-duty rainwater harvesting: water supply and urban stream restoration. [Thesis (PhD/Research)]

V

Vali, Ramin and Mehrinejad Khotbehsara, Elham and Saberian, Mohammad and Li, Jie and Mehrinejad, Mojdeh and Jahandari, Soheil (2017) A three-dimensional numerical comparison of bearing capacity and settlement of tapered and under-reamed piles. International Journal of Geotechnical Engineering. ISSN 1938-6362

Verrall, Daniel Graham (2016) Modelling water allocation increases using climate predictions. [USQ Project]

W

Wongcharee, Surachai and Aravinthan, Vasantha and Erdei, Laszlo (2018) Mesoporous activated carbon-zeolite composite prepared from waste macadamia nut shell and synthetic faujasite. Chinese Journal of Chemical Engineering. ISSN 1004-9541

Widjaya, Elita R. and Chen, Guangnan and Bowtell, Les and Hills, Catherine (2018) Gasification of non-woody biomass: a literature review. Renewable and Sustainable Energy Reviews, 89. pp. 184-193. ISSN 1364-0321

Wang, Y. and Thambiratnam, D. P. and Chan, T. H. T. and Nguyen, A. (2018) Damage detection in asymmetric buildings using vibration-based techniques. Structural Control and Health Monitoring, 25 (5). pp. 1-19. ISSN 1545-2255

Wongcharee, Surachai and Aravinthan, Vasantha and Erdei, Laszlo and Sanongraj, Wipada (2018) Mesoporous activated carbon prepared from macadamia nut shell waste by carbon dioxide activation: comparative characterisation and study of methylene blue removal from aqueous solution. Asia-Pacific Journal of Chemical Engineering (e2179). pp. 1-16. ISSN 1932-2143

Wang, Yi and Thambiratnam, David P. and Chan, Tommy H.T. and Nguyen, Andy (2018) Method development of damage detection in asymmetric buildings. Journal of Sound and Vibration, 423. pp. 41-56. ISSN 0022-460X

Widjaya, Elita Rahmarestia (2018) Thermochemical conversion of non‐woody biomass: upgrading cotton gin waste into solid fuel. [Thesis (PhD/Research)]

Wu, Min-Nan and Maity, Jyoti Prakash and Bundschuh, Jochen and Li, Che-Feng and Lee, Chin-Rong and Hsu, Chun-Mei and Lee, Wen-Chien and Huang, Chung-Ho and Chen, Chien-Yen (2017) Green technological approach to synthesis hydrophobic stable crystalline calcite particles with one-pot synthesis for oil-water separation during oil spill cleanup. Water Research, 123. pp. 332-344. ISSN 0043-1354

Wongcharee, Surachai and Aravinthan, Vasantha and Erdei, Laszlo and Sanongraj, Wipada (2017) Use of macadamia nut shell residues as magnetic nanosorbents. International Biodeterioration and Biodegradation, 124. pp. 1-12. ISSN 0964-8305

Watson, Liam Douglas (2016) Asset condition monitoring of Gympie regional council’s road network. [USQ Project]

Wiya, Robert (2016) Behavior of concrete when using RAP (Reclaimed Asphalt Pavement) as a coarse aggregate material. [USQ Project]

Wilson, Matthew (2016) Deterioration of timber bridges using a Fault Tree Analysis. [USQ Project]

Williams, Alexander (2016) Improving Queensland speed zoning practices. [USQ Project]

Woolley, Reece (2016) The performance evaluation of bridge culverts reinforced with GFRP bars. [USQ Project]

West, David (2016) Tracking machinery to investigate the effect of compaction during sugar cane harvesting. [USQ Project]

Waqar Ali Shah, Syed and Mahmood, Muhammad Nateque and Das, Narottam (2016) Strategic asset management framework for the improvement of large scale PV power plants in Australia. In: 26th Australasian Universities Power Engineering Conference (AUPEC 2016), 25-28 Sept 2016, Brisbane, Australia.

Wickramasinghe, Wasanthi R. and Thambiratnam, David P. and Chan, Tommy H. T. and Nguyen, Theanh (2016) Vibration characteristics and damage detection in a suspension bridge. Journal of Sound and Vibration, 375. pp. 254-274. ISSN 0022-460X

Wager, Thomas (2015) Planning support systems for complex infrastructure development. [USQ Project]

West, Jared (2015) Transitioning roadways from high-speed to low-speed environments when approaching regional towns in North Queensland. [USQ Project]

Wilson, Aaron P (2015) Establishing a mix design procedure for Geopolymer concrete. [USQ Project]

Walker, Scott (2015) Analysis of the behaviour of composite transom decks for railway bridges. [USQ Project]

Wilson, Ronald J (2015) Redefining the standard compaction test to better describe the usage of cotton picking machines on Australian vertosols. [USQ Project]

Weinheimer, Ina (2015) Wastewater treatment using tidal flow wetlands. [USQ Project]

Wright, Christopher and Thorpe, David (2015) Use of advanced and green construction materials by small and medium-sized enterprises. In: 31st Annual Conference of the Association of Researchers in Construction Management (ARCOM 2015) , 7-9 Nov 2015, Lincoln, United Kingdom.

Wahalathanthri, Buddhi L. and Lokuge, Weena and Karunasena, Warna and Setunge, Sujeeva (2015) Framework to inspect floodways towards estimating damage. In: Annual Conference of the Australasian Fire and Emergency Service Authorities Council and Bushfire & Natural Hazards CRC (AFAC15): New Directions in Emergency Management, 01-03 Sept 2015, Adelaide, South Australia.

Widjaya, Elita R. and Chen, Guangnan and Bowtell, Leslie and Hills, Catherine (2015) A preliminary assessment of cotton gin waste-mixture co-gasification performance. In: 2nd International Conference on Agriculture, Environment and Biological Sciences (ICAEBS'15), 16-17 August 2015, Bali, Indonesia.

Wahalathanthri, Buddhi and Lokuge, Weena and Karunasena, Warna and Setunge, Sujeeva (2015) Emergency service demand in Queensland during natural disasters. In: 5th International Conference on Building Resilience, 15-17 July 2015, Newcastle, Australia.

Wahalathantri, Buddhi Lankananda and Lokuge, Weena and Karunasena, Warna and Setunge, Sujeeva (2015) Vulnerability of floodways under extreme flood events. Natural Hazards Review, 17 (1). ISSN 1527-6988

Wiewiora, Anna and Brown, Kerry and Dhakal, Subas P. and Mahmood, Muhammad Nateque (2015) Managing knowledge for asset management: shifting from process to relational frames. In: 7th World Congress on Engineering Asset Management: Towards Integration and Interoperability (WCEAM 2012), 8-9 Oct 2012, Daejeon City, Korea.

Wright, Christopher John Brockway (2014) Evaluation of issues for small and medium-sized enterprises in the use of advanced and green engineering materials. [USQ Project]

Wilton, Joshua (2014) Foam bitumen stabilisation in north west NSW. [USQ Project]

Wady, Ivan (2014) Inflow/infiltration strategic management project. [USQ Project]

Watson, George Kenneth (2014) Measurement of waste in concrete construction using lean construction methodologies. [USQ Project]

Williams, Wesley James (2014) Numerical simulations of water surfaces for improved evaporation prediction. [USQ Project]

Woodhouse, N. P. and Bennett, J. McL. and Jensen, T. A. (2013) Change in the cotton harvesting system: a review and implications for the John Deere 7760 cotton picker. Discussion Paper. University of Southern Queensland , Toowoomba, Australia. [Report]

Wicks, Jaymee (2013) Investigation of factors influencing maximum biogas production of abattoir wastewater. [USQ Project]

X

Xiang, Ziru and Chan, Tommy H. T. and Thambiratnam, David P. and Nguyen, Andy (2017) Prestress and excitation force identification in a prestressed concrete box–girder bridge. Computers and Concrete, 20 (5). pp. 617-625. ISSN 1598-8198

Y

Yousif, B. F. and Basson, Marita and Hobohm, Carola (2014) Multimedia resources in engineering. In: Modern mechanical engineering: research, development and education. Materials Forming, Machining and Tribology. Springer-Verlag, Heidelberg, Germany, pp. 449-461. ISBN 978-3-642-45175-1

Yusoff, Ahmad Razali and Ariff, Mohd Farid Mohd and Idris, Khairulnizam and Majid, Zulkepli and Setan, Halim and Chong, Albert K. (2014) Analysis of camera parameters value in various object distances calibration. IOP Conference Series: Earth and Environmental Science, 18 (1). pp. 1-5. ISSN 1755-1307

Z

Zargar, Majid (2018) Development and application of a new multistage confined dynamic creep test for asphalt. [Thesis (PhD/Research)]

Zhang, Dongqing and Trzcinski, Antoine Prandota and Luo, Jinxue and Stuckey, David C. and Tan, Soon Keat (2017) Fate and behavior of dissolved organic matter in a submerged anoxic-aerobic membrane bioreactor (MBR). Environmental Science and Pollution Research. ISSN 0944-1344

Zhang, Zhenyu and Liu, Xiaoye and McDougall, Kevin and Wright, Wendy (2017) Fuzzy analysis of airborne LiDAR data for rainforest boundary determination. In: 6th International Conference on Telecommunications and Remote Sensing (ICTRS'17) , 06-07 Nov 2017, Delft, Netherlands.

Zhang, Dongqing and Trzcinski, Antoine and Oh, Hyun-Suk and Chew, Evelyn and Liu, Yu and Tan, Soon Keat and Ng, Wun Jern (2017) Comparison of the effects and distribution of zinc oxide nanoparticles and zinc ions in activated sludge reactors. Journal of Environmental Science and Health, Part A: Toxic Hazardous Substances and Environmental Engineering, 52 (11). pp. 1073-1081. ISSN 1093-4529

Zhang, Dongqing and Trzcinski, Antoine P. and Oh, Hyun-Suk and Chew, Evelyn and Tan, Soon Keat and Ng, Wun Jern and Liu, Yu (2017) Comparison and distribution of copper oxide nanoparticles and copper ions in activated sludge reactors. Journal of Environmental Science and Health, Part A, 52 (6). pp. 507-514. ISSN 1093-4529

Zhu, Yingcan and Marchuk, Alla and Bennett, John McLean (2016) Rapid method for assessment of soil structural stability by turbidimeter. Soil Science Society of America Journal, 80 (6). pp. 1629-1637. ISSN 0361-5995

Zhang, Dongqing and Trzcinski, Antoine Prandota and Kunacheva, Chinagarn and Stuckey, David C. and Liu, Yu and Tan, Soon Keat and Ng, Wun Jern (2016) Characterization of soluble microbial products (SMPs) in a membrane bioreactor (MBR) treating municipal wastewater containing pharmaceutical compounds. Water Research, 102. pp. 594-606. ISSN 0043-1354

Zador, Tari (2016) Assessing spatial mismatch patterns in the Gold Coast. [USQ Project]

Zhuge, Yan and Shen, C. J. and Lu, G.X. and Hesse, G. and Chen, S. and Ruan, D. (2014) Material properties and impact resistance of a new lightweight engineered cementitious composite. In: 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 23), 9-12 Dec 2014, Byron Bay, Australia.

Zhang, Zhenyu and Liu, Xiaoye and Wright, Wendy (2014) Feature assessment in object-based forest classification using airborne LiDAR data and high spatial resolution satellite imagery. In: 3rd International Workshop on Earth Observation and Remote Sensing Applications (EORSA 2014): Global Change and Sustainable Development: A Remote Sensing Perspective, 11-14 Jun 2014, Changsha, China.

Zainol Abdullah, Wan Nor Zanariah and Apan, Armando A. and Maraseni, Tek N. and Le Brocque, Andrew F. (2014) Spectral discrimination of bulloak (Allocasuarina luehmannii) and associated woodland for habitat mapping of the endangered bulloak jewel butterfly (Hypochrysops piceata) in southern Queensland. Journal of Applied Remote Sensing, 8 (1). 083561-1. ISSN 1931-3195

Zulkarnain, Azwa (2014) Moisture absorption and hydrothermal aging in bamboo fibre/polyester composite. In: Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World, 7–9 Apr 2014, Newcastle, Australia.

Zhuge, Yan (2013) The performance of recycled and quarry aggregates and their effect on permeable concrete. In: Concrete 2013: Understanding Concrete, 16-18 Oct 2013, Gold Coast, Australia.

Zeller, Mark Nicholas (2013) Reduced road lighting standards during times associated with low traffic volumes. [USQ Project]

Zahl, Michael Stuart (2013) RTK GNSS in cadastral surveying. [USQ Project]

Zhang, Zhenyu and Liu, Xiaoye (2013) Support vector machines for tree species identification using LiDAR-derived structure and intensity variables. Geocarto International, 28 (4). pp. 364-378. ISSN 1010-6049

This list was generated on Wed Dec 12 13:06:49 2018 AEST.