Browse by Faculty / Department / School

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors Name | Date | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | V | W | X | Y | Z
Number of items: 968.

A

Azwa, Z. N. and Yousif, B. F. and Manalo, A. C. and Karunasena, W. (2013) A review on the degradability of polymeric composites based on natural fibres. Materials and Design, 47. pp. 424-442. ISSN 0264-1275

Albdiry, M. T. and Yousif, B. F. and Ku, H. and Lau, K. T. (2013) A critical review on the manufacturing processes in relation to the properties of nanoclay/polymer composites. Journal of Composite Materials, 47 (9). pp. 1093-1115. ISSN 0021-9983

An-Vo, D.-A. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2013) ADI method based on C2-continuous two-node integrated-RBF elements for viscous flows. Applied Mathematical Modelling, 37 (7). pp. 5184-5203. ISSN 0307-904X

Al-Doori, Ghassan Fadil Lattif (2013) Investigation of refrigeration system steam ejector performance through experiments and computational simulations. [Thesis (PhD/Research)]

Arhaim, Y. H and Shalwan, A. and Yousif, B. F. (2013) Correlation between frictional force, interface temperature and specific wear rate of fibre polymer composites. International Conference on Advanced Materials Research , 685 (685). pp. 45-49.

Alsaeed, T. and Yousif, B. F. and Ku, H. (2013) The potential of using date palm fibres as reinforcement for polymeric composites. Materials and Design, 43. pp. 177-184. ISSN 0264-1275

Alves-Filho, O. and Senadeera, W. and Eikevik, T. (2013) Drying condition effects on fluidization quality and fluidization velocity at initial and final stages of cubical particulates for pet food. In: 6th Nordic Drying Conference (NDC2013), 5-7 June 2013, Copenhagen, Denmark.

Alves-Filho, O. and Senadeera, W. and Eikevik, T. (2013) Influence of drying conditions on the moisture diffusion during single stage and two stage fluidized bed drying of bovine intestine for pet food. In: 6th Nordic Drying Conference (NDC2013), 5-7 June 2013, Copenhagen, Denmark.

Al-Faruk, A. and Sharifian, S. A. and Al-Atresh, S. (2012) Numerical investigation of performance of a new type of savonius turbine. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Al-Atresh, R. S. and Sharifian, S. A. and Al-Faruk, A. (2012) The effect of inlet velocity and temperature on the strength of the swirling induced by a split channel: a CFD approach. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Al-Sandooq, J. M. and Yousif, B. F. and Jensen, T. A. (2012) Tribological consideration in roller mill machines for agriculture applications. Surface Review and Letters, 19 (6). pp. 1250065-1. ISSN 0218-625X

Al-lwayzy, Saddam H. (2012) Alternative fuels from microalgae for diesel engine. In: USQ Combustion Meeting, 10 Oct 2012, Toowoomba, Australia.

Al-Juboori, Raed A. and Yusaf, Talal (2012) Biofouling in RO system: mechanisms, monitoring and controlling. Desalination, 302. pp. 1-23. ISSN 0011-9164

Al-Faruk, Abdullah and Sharifian, Ahmad (2012) Angular velocity of a combined unloaded Savonius turbine with a vortex inducing chamber: a CFD approach. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sept 2012, Toowoomba, Australia.

Albdiry, Mushtaq and Alethari, Haydar (2012) Effect of alumina inclusions on microstructure and mechanical properties of 62 WC, 32 (Ti-W) C and 6 Co compacts. International Journal of Microstructure and Materials Properties, 7 (4). pp. 329-340. ISSN 1741-8410

Agrira, Abdalla Ibrahim Abuniran (2012) Internal combustion engine heat transfer-transient thermal analysis. [Thesis (PhD/Research)]

Al-Atresh, Safia and Sharifian, Ahmad and Kueger, Bradley (2012) Using a split chimney for dilution of exhaust pollution: a CFD approach. In: 2012 International Conference on Fluid Dynamics and Thermodynamics Technologies (FDTT 2012), 17-18 March 2012, Singapore.

Al-Juboori, Raed A. and Yusaf, Talal and Aravinthan, Vasanthadevi (2012) Investigating the efficiency of thermosonication for controlling biofouling in batch membrane systems. Desalination, 286. pp. 349-357. ISSN 0011-9164

Awad, Ziad K. and Yusaf, Talal (2012) Fibre composite railway sleeper design by using FE approach and optimization techniques. Structural Engineering and Mechanics, 41 (2). pp. 231-242. ISSN 1225-4568

Al-Falahi, Amir and Yusoff, M. Z. and Yusaf, Talal and Ahmed, Diyar I. (2012) Numerical investigation of flow instability in shock tube due to shock wave-contact surface interactions. International Journal of Numerical Methods for Heat and Fluid Flow, 22 (3). pp. 377-398. ISSN 0961-5539

Al-lwayzy, Saddam H. and Yusaf, Talal and Jensen, Troy (2012) Evaluating tractor performance and exhaust gas emissions using biodiesel from cotton seed oil. IOP Conference Series: Materials Science and Engineering, 36 (1). pp. 442-452. ISSN 17578981

Al-Juboori, R. A. and Yusaf, T. F. (2012) Improving the performance of ultrasonic horn reactor for deactivating microorganisms in water. IOP Conference Series: Materials Science and Engineering, 36 (1). pp. 1-12. ISSN 1757-8981

An-Vo, D.-A. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2012) Modeling strain localisation in a segmented bar by a C2-continuous two-node integrated-RBF element formulation. In: 34th International Conference on Boundary Elements and other Mesh Reduction Methods (BEM/MRM 2012), 25-27 Jun 2012, Split, Croatia.

AL-Khaffajy, Marwaan Awad Hamad (2012) Numerical evaluation of the performance of an indirect heating integrated collector storage solar water heating system. [Thesis (PhD/Research)]

Ariafar, Kavous (2012) Performance evaluation of a model thermocompressor using computational fluid dynamics. International Journal of Mechanics, 6 (1). pp. 35-42. ISSN 1998-4448

An-Vo, D.-A. and Tran, C.-D. and Mai-Duy, N. and Tran-Cong, T. (2012) RBF computation of multiscale elliptic problems [Keynote paper]. In: 8th ICCES Special Symposium on Meshless & Other Novel Computational Methods (ICCES MM 2012), 2-6 Sep 2012, Budva, Montenegro.

An-Vo, D.-A. and Tran, C.-D. and Mai-Duy, N. and Tran-Cong, T. (2012) RBF-based multiscale control volume method for second order elliptic problems with oscillatory coefficients. CMES: Computer Modeling in Engineering and Sciences, 89 (4). pp. 303-359. ISSN 1526-1492

Albdiry, M. T. and Almosawi, A. I. and Yousif, B. F. (2012) The synergistic effect of hybrid flame retardants on pyrolysis behaviour of hybrid composite materials. Journal of Engineering Science and Technology, 7 (3). pp. 351-359. ISSN 1823-4690

Albdiry, M. T. and Almosawi, A. I. (2011) Effect of compacting pressure on microstructure and mechanical properties of carbide cutting tools. Powder Metallurgy, 54 (5). pp. 585-591. ISSN 0032-5899

AL-Khaffajy, M. and Mossad, R. (2011) Optimization of the air gap spacing in a solar water heater with double glass cover. In: 9th Australasian Heat and Mass Transfer Conference, 2-4 Nov 2011, Melbourne, Australia.

Al-Sandooq, J. M. and Yousif, B. F. and Jensen, T. A. (2011) The possibility of using polymers in agriculture milling equipment. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Ahmed, Mansur and Islam, Md Saiful and Ahsan, Qumrul and Islam, Md Mainul (2011) Fabrication and characterization of unidirectional silk fibre composites. Key Engineering Materials, 471-472 (1). pp. 20-25. ISSN 1013-9826

An-Vo, D. A. and Mai-Duy, N. and Tran-Cong, T. (2011) A C2-continuous control-volume technique based on cartesian grids and two-node integrated-RBF elements for second-order elliptic problems. CMES: Computer Modeling in Engineering and Sciences, 72 (4). pp. 299-334. ISSN 1526-1492

An-Vo, D. A. and Mai-Duy, N. and Tran-Cong, T. (2011) High-order upwind methods based on C2-continuous two-node integrated-RBF elements for viscous flows. CMES: Computer Modeling in Engineering and Sciences, 80 (2). pp. 141-177. ISSN 1526-1492

An-Vo, D.-A. and Tran, C.-D. and Mai-Duy, N. and Tran-Cong, T. (2011) IRBFN-based multiscale solution of a model 1D elliptic equation. In: 33rd International Conference on Boundary Elements and other Mesh Reduction Methods (BEM/MRM 2011), 28-30 Jun 2011, New Forest, United Kingdom.

Assiriyage, Buddhi Nuwan Lanka (2010) An investigation of aluminium/eproxy particulate composite system - impact/long-term behavior. [USQ Project]

Ahmed, Mansur and Islam, Md Saiful and Ahsan, Qumrul and Islam, Md Mainul (2010) Physical and tensile properties of raw and treated silk fibres. In: 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010), 24-26 Sept 2010, Kottayam, Kerala, India.

Al-Haddad, A. A. and Salih, Nbhan D. and Wen, Chin Chee and Yusaf, T. F. and Yousif, B. F. (2010) New technique measuring film thickness for tribological machines. In: 2009 ASME International Mechanical Engineering Congress and Exposition, 13-19 Nov 2009, Lake Buena Vista, FL. United States.

Agrira, Abdalla and Buttsworth, David R. and Yusaf, Talal (2009) Instantaneous heat flux simulation of S.I. engines: comparison of unsteady thermal boundary layer modelling with experimental data. In: 3rd International Conference on Energy and Environment (ICEE 2009): Advancement Towards Global Sustainability , 7-8 Dec 2009, Malacca, Malaysia.

Assiriyage, Buddhi Nuwan Lanka (2009) Develop a computer-based system to assess and exercise the arm movement of stroke patients. [USQ Project]

Al-Falahi, Amir and Yusoff, M. Z. and Shuaib, N. H. and Yusaf, T. (2009) Flow instability in shock tube due to shock wave-boundary layer-contact surface interactions, a numerical study. European Journal of Scientific Research, 30 (1). pp. 164-176. ISSN 1450-216X

Al-Falahi, Amir and Yusoff, M. Z. and Yusaf, T. (2009) An experimental evaluation of shock wave strength and peak pressure in a conventional shock tube and a free-piston compressor. In: ASME International Mechanical Engineering Congress and Exposition (IMECE 2008) , 31 Oct-6 Nov 2008, Boston, MA. United States.

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao (2009) Preface to futures in mechanics of structures and materials conference. ACMSM20. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Al-Falahi, Amir and Yusoff, M. Z. and Yusaf, T. (2008) Numerical simulation of inviscid transient flows in shock tube and its validations. In: World Academy of Science, Engineering and Technology (WASET 2008), 12-14 Sep 2008, Heidelberg, Germany.

Al-Falahi, Amir and Yusoff, Mohd. Zamri bin and Yusaf, Talal (2008) Development of a short duration hypersonic test facility at Universiti Tenaga Nasional. Institution of Engineers, Malaysia. Journal, 69 (1). pp. 19-25. ISSN 0126-513X

Al-Shalabi, Ammar and Chee, S. B. and Singh, Narish and Yousif, B. F. (2008) Framework for orienting engineering undergraduate final year projects towards new product innovation process. In: 10th Conference on Innovation and Knowledge Management in Business Globalization (IBIMA 2008) , 30 Jun-1 Jul 2008, Kuala Lumpur, Malaysia.

Al-Falahi, Amir and Yusoff, M. Z. and Yusaf, T. (2008) Numerical simulation of inviscid transient flows in shock tube and its validations. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 2 (7). pp. 1-11. ISSN 1307-7465

Al-Falahi, Amir and Yusaf, T. and Yusoff, M. Z. (2007) Experimental and CFD study of the effects of design parameters on Reynolds number in a short duration hypersonic test facility. In: EPMESC X: Enhancement and Promotion of Computational Methods in Engineering and Science X, 21-23 Aug 2006, Sanya, China.

Al-Falahi, Amir and Yusoff, M. Z. and Yusaf, T. (2007) Numerical and experimental study to evaluate the performance of Universiti Tenaga Nasional short duration hypersonic test facility. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Al-Abdeli, Yasir and Bullen, Frank (2006) Connecting teaching and research through problem based learning in thermal and automotive engineering. In: AaeE 2006: 17th Annual Conference of the Australasian Association for Engineering Education, 10-13 Dec 2006, Auckland, New Zealand.

Armstead, Jared Kenneth (2006) Chassis development for the formula SAE racer. [USQ Project]

Ang, Soon Lim (2006) Predicting the crushing stress of composite materials. [USQ Project]

Al-Falahi, Amir and Yusaf, T. and Yusoff, M. Z. (2006) Universiti Tenaga Nasional short duration hypersonic test facility: calibration and verification. In: 8th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA 2006), 4-7 Jul 2006, Torino, Italy.

Ali, Noorahmad Bin (2005) Corrosion in the boiler tubes of the Tuas South Incineration Plant, Singapore. [USQ Project]

Airs, Leslie (2005) Mobile robot guidance and navigation. [USQ Project]

Abdullah, Shahrir and Yousif, B. F. and Sopian, Kamaruzzaman (2005) Design consideration of low temperature differential double-acting Stirling engine for solar application. Renewable Energy, 30 (1). pp. 1923-1941. ISSN 0960-1481

Ang, Soh Fong (2004) Evaluation impact strength on particulate reinforced (25% and 33%) vinyl ester composite cured under microwave conditions. [USQ Project]

Armstrong, John (2004) Formula SAE: design overview and project management. [USQ Project]

Ali, Md Nawsher and Islam, Md Mainul and Ferdous, Chy. Md Refaul (2004) Investigation for a suitable screw of a briquetting machine. In: 2nd BSME-ASME lnternational Conference on Thermal Engineering, 2-4 Jan 2004, Dhaka, Bangladesh.

Aigner, Peter and Billingsley, John (2000) The BrowsMouse - computer access with eyebrows. In: Mechatronics and machine vision. Robotics and Mechatronics (3). Research Studies Press, Baldock, United Kingdom, pp. 189-195. ISBN 0--86380-261-3

B

Brookshaw, Iain J. and Low, Tobias (2012) Monocular vision, optical blur and visual looming as a basis for mobile robot obstacle avoidance. In: 16th International Conference on Mechatronics Technology (ICMT 2012): Advanced Mechatronics, Precision Measurement and NanoManufacturing, 16-19 Oct 2012, Tianjin, China.

Billingsley, John (2012) The place of mechatronics within the faculty structure – a personal view. In: 16th International Conference on Mechatronics Technology: Advanced Mechatronics, Precision Measurement and NanoManufacturing (ICMT 2012), 16-19 Oct 2012, Tianjing, China.

Bates, Matthew (2012) The selection of inegrated and sustainable waste processing techniques for application within Indonesia. [USQ Project]

Buttsworth, David and Jacobs, Peter and Potter, Daniel and Mudford, Neil and D'Souza, Mary and Eichmann, Troy and Jenniskens, Peter and McIntyre, Tim and Jokic, Michael and Jacobs, Carolyn and Upcroft, Ben and Khan, Razmi and Porat, Hadas and Neely, Andrew and Lohle, Stefan (2012) Super-orbital re-entry in Australia: laboratory measurement, simulation and flight observation [Keynote lecture]. In: ISSW28: 28th International Symposium on Shock Waves, 17-22 Jul 2011, Manchester, United Kingdom.

Buttsworth, David and Jacobs, P. and Morgan, R. G. and Jenniskens, Peter (2012) Near ultraviolet emission spectroscopy of the Hayabusa re-entry. In: 50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition (AIAA 2012): Advancing the Science of Flight Technology, 9-12 Jan 2012, Nashville, TN. United States.

Brown, Steven (2011) Design of a high-shear geopolymer concrete mixer. [USQ Project]

Brookshaw, Iain (2011) Real time implementation of obstacle avoidance for an autonomous mobile robot using monocular computer vision. [USQ Project]

Billingsley, John (2011) Machine vision in agriculture. In: Encyclopedia of agrophysics. Encyclopedia of Earth Sciences Series . Springer, Dordrecht, Netherlands, pp. 433-435. ISBN 978-90-481-3584-4

Buttsworth, David R. and Agrira, Abdalla and Malpress, Ray and Yusaf, Talal (2011) Simulation of instantaneous heat transfer in spark ignition internal combustion engines: unsteady thermal boundary layer modeling. Journal of Engineering for Gas Turbines and Power , 133 (2). pp. 1-5. ISSN 0742-4795

Baker, Stuart (2010) Induced draft (ID) fan lubrication system design review and proposed modification upgrade at Callide C Power Station. [USQ Project]

Bishop, Damon Thomas (2010) Pump gland improvement project. [USQ Project]

Boh, Tjasa and Billingsley, John and Bradbeer, Robin S. and Hodgson, Paul (2010) Terramechanics based traction control of underwater wheeled robot. In: OCEANS 2010: Showcasing Advances in Marine Science and Engineering, 24-27 May 2010, Sydney, Australia.

Buttsworth, David R. (2010) Ludwieg tunnel facility with free piston compression heating for supersonic and hypersonic testing. In: 9th Australian Space Science Conference, 28-30 Sept 2009, Sydney, Australia.

Billingsley, John (2010) Controlled damping of a 48-metre wide spray rig. In: 16th Annual Conference on Mechatronics and Machine Vision in Practice (M2VIP 2010) , 22-24 Jun 2010, Darussalam, Brunei.

Buttsworth, David and D'Souza, Mary and Potter, Daniel and Eichmann, Troy and Mudford, Neil and McGilvray, Matthew and McIntyre, Timothy J. and Jacobs, Peter and Morgan, Richard (2010) Expansion tunnel radiation experiments to support Hayabusa re-entry observations. In: 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition (AIAA 2010), 4-7 Jan 2010, Orlando, FL, USA.

Billingsley, John (2010) The facts about carbon and climate: a presentation of data for the reader's evaluation. In: 2010 Southern Region Engineering Conference (SREC2010), 10-12 Nov 2010, Toowoomba, Australia.

Billingsley, John and Oetomo, Denny and Reid, John (2009) Agricultural robotics. IEEE Robotics and Automation Magazine, 16 (4). 16, cont-19. ISSN 1070-9932

Buttsworth, David and Saleh, Khalid and Yusaf, Talal (2009) Discrete particle simulation for the initial stages of ice accretion in aircraft engines: initial model development. In: 3rd International Conference on Energy and Environment (ICEE 2009): Advancement Towards Global Sustainability, 7-8 Dec 2009, Malacca, Malaysia.

Buttsworth, David (2009) Multizone internal combustion engine modelling: initial assessment of a simulation tool developed in Matlab. In: 3rd International Conference on Energy and Environment (ICEE 2009): Advancement Towards Global Sustainability , 7-8 Dec 2009, Malacca, Malaysia.

Buttsworth, D. R. (2009) Nitrous oxide decomposition for supersonic combustion experiments in the USQ Ludwieg tube facility. In: Australian Combustion Symposium (ACS 2009), 2-4 Dec 2009, Brisbane, Australia.

Buttsworth, David R. and Jacobs, Peter A. (2009) Premature ignition in scramjets with intake injection: a preliminary laminar mixing layer simulation. In: Australian Combustion Symposium 2009 (ACS09), 2-4 Dec 2009, Brisbane, Australia.

Billingsley, John (2009) Automation and the farmer. In: SEAg 2009: Agricultural Technology in a Changing Climate, 13-16 Sept 2009, Brisbane, Australia.

Buttsworth, David R. and Sercombe, David B. (2009) Cranz-Schardin visualisation of a hypersonic cone with gas injection. In: 28th International Congress on High-Speed Imaging and Photonics, 9-14 Nov 2008, Canberra, Australia.

Boh, Tjasa and Billingsley, John and Bradbeer, Robin and Hodgson, Paul (2009) Development of a multi-drive submersible platform for deep seabed research. In: OCEANS 2009: Balancing Technology with Future Needs, 11-14 May 2009, Bremen, Germany.

Buttsworth, David R. and Agrira, Abdalla and Malpress, Ray and Yusaf, Talal (2009) Simulation of instantaneous heat transfer in spark ignition internal combustion engines: unsteady thermal boundary layer modelling. In: ASME Internal Combustion Engine Division Fall Technical Conference (ICEF 2009) , 27-30 Sep 2009, Lucerne, Switzerland.

Brink, Gavin and Wandel, Andrew P. and Hancock, Nigel and Pather, Selvan (2009) Towards adaptive operational requirements for optimal application of evaporation-suppressing monolayer to reservoirs via a 'universal design framework'. In: IWER 2009: International Workshop on Evaporation from Reservoirs , 9-11 Dec 2009, Gold Coast, Australia.

Billingsley, John (2008) Innovative mechatronic technologies in horticultural systems. In: The 2008 National and Trans-Tasman Horticultural Science Conference, 21-23 July 2008, Surfers Paradise, Queensland.

Billingsley, John (2008) Some agricultural applications of machine vision. In: 2008 IEEE International Conference on Robotics and Automation (ICRA 2008), 19-23 May 2008, Pasadena, California.

Billingsley, John (2008) More machine vision applications in the NCEA. In: Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany, pp. 333-343. ISBN 978-3-540-74026-1

Billingsley, John and Visala, Arto and Dunn, Mark (2008) Robotics in agriculture and forestry. In: Springer handbook of robotics. Springer, Berlin, Germany, pp. 1065-1077. ISBN 978-3-540-23957-4

Billingsley, John (2008) Viewpoint: Localisation. Sensor Review, 28 (2). ISSN 0260-2288

Billingsley, John (2007) Bovine intelligence for training horses. In: M2VIP 2007: 14th Annual Conference on Mechatronics and Machine Vision in Practice, 3-5 Dec 2007, Xiamen, China.

Billingsley, John (2007) Vision applications in agriculture. In: M2VIP 2007: 14th Annual Conference on Mechatronics and Machine Vision in Practice, 3-5 Dec 2007, Xiamen, China.

Buttsworth, D. R. and Davison, C. and MacLeod, J. D. and Strapp, J. W. (2007) Evaporator design for an isokinetic total water content probe in a naturally aspirating configuration. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Booshand, Peter John (2007) Literature review of advanced research and innovation in the mining industry. [USQ Project]

Bichel, Daniel (2007) Optimisation of biodiesel stationary engine performance by modelling and simulating the running conditions. [USQ Project]

Billingsley, John (2007) Industry and academe - which one holds the cutting edge? In: 9th Electrical Manufacturing Lecture, 19 Sept 2007, Brisbane, Australia.

Billingsley, John (2007) Climbing up the wall. In: 10th International Conference on Climbing and Walking Robots and the Supporting Technologies for Mobile Machines: CLAWAR 2007, 16-18 July 2007, Singapore.

Bishop, Matthew Darrell (2007) Educational robot design. [USQ Project]

Billingsley, John (2006) More machine vision applications in the NCEA. In: 13th Annual Conference on Mechatronics and Machine Vision in Practice, 5-7 Dec 2006, Toowoomba, Australia.

Bullen, Frank and Wood, David (2006) The construction of undergraduate student engineering design teams using the MTBI and Belbin Test. In: AaeE 2006: 17th Annual Conference of the Australasian Association for Engineering Education, 10-13 Dec 2006, Auckland, New Zealand.

Billingsley, John and Dunn, Mark and Bell, David (2006) Vision based macadamia yield assessment. Sensor Review, 26 (4). pp. 312-317. ISSN 0260-2288

Buttsworth, David R. and Stevens, Robert and Stone, C. Richard (2005) Eroding ribbon thermocouples: impulse response and transient heat flux analysis. Measurement Science and Technology, 16 (7). pp. 1487-1494. ISSN 0957-0233

Billingsley, John and Dunn, Mark (2005) Unusual vision - machine vision applications at the NCEA. Sensor Review, 25 (3). pp. 202-208. ISSN 0260-2288

Baker, Christopher Scott (2004) FoES Formula SAE-A space frame chassis design. [USQ Project]

Buttsworth, David R. and Jones, Terry V. (2004) Transient temperature probe measurements in a Mach 4 nitrogen jet. Experiments in Fluids, 37 (1). pp. 137-145. ISSN 0723-4864

Bullen, Frank and Sargison, Jane and McCulloch, John (2004) Developing multi-discipline design skills in undergraduates. In: American Society for Engineering Education Annual Conference & Exposition (ASEE 2004): Engineering Education Reaches New Heights , 20-23 Jun 2004, Salt Lake City, UT. United States.

Billingsley, John (2004) Viewpoint: The future of mechatronics. Assembly Automation, 24 (4). pp. 337-339. ISSN 0144-5154

Billingsley, John and Dunlop, Reg (2003) Teaching mechatronics principles using laboratory classes. In: 10th Annual Conference on Mechatronics and Machine Vision in Practice, 09-11 Dec 2003, Perth, Australia.

Buttsworth, David R. and Jones, Terry V. (2003) Concentration probe measurements in a Mach 4 nonreacting hydrogen jet. Journal of Fluids Engineering, 125 (4). pp. 628-635. ISSN 0098-2202

Buttsworth, David R. and Jones, Terry V. (2003) High bandwidth stagnation temperature measurements in a Mach 6 gun tunnel flow. Experimental Thermal and Fluid Science, 27 (2). pp. 177-186. ISSN 0894-1777

Buttsworth, David R. (2002) Transient response of an erodable heat flux gauge using finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216 (8). pp. 701-716. ISSN 0954-4070

Buttsworth, David R. (2002) Heat transfer during transient compression: measurements and simulations. Shock Waves, 12 (1). pp. 87-91. ISSN 0938-1287

Buttsworth, David R. and Jacobs, Peter A. and Jones, Terry V. (2002) Simulation of Oxford University gun tunnel performance using a quasi-one-dimensional model. Shock Waves, 11 (5). pp. 377-383. ISSN 0938-1287

Billingsley, John (2002) The counting of macadamia nuts. In: Mechatronics and machine vision 2002: current practice. Research Studies Press, Baldock, Hertfordshire, England, pp. 221-228. ISBN 0863802788

Brell, Edward and Van Erp, Gerard and Snook, Chris (2002) Train crashworthiness and its impact on society. Transactions of Mechanical Engineering, 25 (2). pp. 103-112. ISSN 0727-7369

Buttsworth, David R. (2001) Assessment of effective thermal product of surface junction thermocouples on millisecond and microsecond time scales. Experimental Thermal and Fluid Science, 25 (6). pp. 409-420. ISSN 0894-1777

Billingsley, John (2000) Low cost GPS for the autonomous robot farmhand. In: Mechatronics and machine vision. Robotics and Mechatronics (3). Research Studies Press, Baldock, United Kingdom, pp. 119-125. ISBN 0--86380-261-3

Brell, Edward and Van Erp, Gerard and Snook, Chris (1999) Can the influence of mechanical impedance improve structural crash worthiness? In: 16th Australasian Conference on the Mechanics of Structures and Materials 1999, 8-10 Dec 1999, Sydney, Australia.

Buttsworth, David R. and Jacobs, Peter A. (1998) Total temperature measurements in a shock tunnel facility. In: AFMC 1998: 13th Australasian Fluid Mechanics Conference, 13-18 Dec 1998, Melbourne, Australia.

Buttsworth, D. R. and Elston, S. J. and Jones, Terry V. (1998) Directional sensitivity of skin friction measurements using nematic liquid crystal. Measurement Science and Technology, 9 (11). pp. 1856-1865. ISSN 0957-0233

Buttsworth, D. R. and Elston, S. J. and Jones, T. V. (1998) Direct full surface skin friction measurement using nematic liquid crystal techniques. Journal of Turbomachinery, 120 (4). pp. 847-853. ISSN 0889-504X

University of Southern Queensland (1998) Vehicle guidance system. AU-B-39747/95.

Buttsworth, D. R. and Morgan, R. G. and Jones, Terry V. (1997) Experiments on oblique shock interactions with planar mixing regions. AIAA Journal, 35 (11). pp. 1774-1777. ISSN 0001-1452

Buttsworth, David R. and Jones, T. V. (1997) Radial conduction effects in transient heat transfer experiments. Aeronautical Journal, 101 (1005). pp. 209-212. ISSN 0001-9240

Billingsley, J. and Schoenfisch, M. (1997) The successful development of a vision guidance system for agriculture. Computers and Electronics in Agriculture, 16 (2). pp. 147-163. ISSN 0168-1699

Billingsley, John (1997) An engineer's lament. Australiasian Science Magazine, 6 (2). pp. 50-51. ISSN 0963-7346

C

Cubero, S. N. and Billingsley, J. and Mohammed, J. (2011) Mechanical design of a large scale amphibious walking and swimming robot. In: 18th International Conference on Mechatonics and Machine Vision in Practice, 6-7 Dec 2011, CSIRO Pullenvale, Brisbane.

Case, Jiel (2011) Initial design of a high-performance and cost-effective mountain bike. [USQ Project]

Craig, Aston J. (2011) Investigation into a fleet bearing monitoring system. [USQ Project]

Cooney, T. I. and Cardona, F. and Tran-Cong, T. (2011) Kinetics of in situ epoxidation of hemp oil under heterogeneous reaction conditions: an overview with preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27-29 Apr 2011, Brisbane, Australia.

Clarke, Jason and Wandel, Andrew P. and Mastorakos, E. (2010) Analysis of data to develop models for spray combustion. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Cardona, F. and Ku, H. and Chouzenoux, L. (2010) Effect of tannin on flexural properties of phenol formaldehyde glycerol reinforced composites: preliminary results. Journal of Reinforced Plastics and Composites, 29 (24). pp. 3543-3553. ISSN 0731-6844

Chin, C. W. and Yousif, B. F. (2010) Tribological behaviour of KFRE composite. International Journal of Modern Physics B, 24 (28). pp. 5589-5599. ISSN 0217-9792

Clarke, Jason (2010) Analysis of data to develop models for spray combustion. [USQ Project]

Commons-Fidge, Ian G. (2010) Grinding mill conceptual design developments. [USQ Project]

Cardona, F. and Aravinthan, T. and Moscou, C. (2010) Modified PF resins for composite structures with improved mechanical properties. Polymers and Polymer Composites, 18 (6). pp. 297-306. ISSN 0967-3911

Chai, Adrian Ngu Ming and Ibrahim, M. and Chuan, Cheah Bin and Yousif, B. F. (2010) On the development of solar drying system. In: ASME International Mechanical Engineering Congress and Exposition (IMECE 2009), 13-19 Nov 2009, Lake Buena Vista, FL; United States.

Coates, Gary (2009) Steering and suspension design for a SAE-A formula race car. [USQ Project]

Cooney, Tyson (2009) Epoxidised resins from natural renewable resources. [USQ Project]

Coulter, Allison Kerrie-Anne (2009) Use of Fiber Bragg grating sensors in structural health monitoring. [USQ Project]

Chee, S. B. and Shalabi, Ammar Al and Chin, C. W. and Yousif, B. F. (2009) On the effect of roller materials on the power window mechanism from a tribological perspective. In: ASME International Mechanical Engineering Congress and Exposition (IMECE 2008), 31 Oct-6 Nov 2008, Boston, MA. United States.

Chin, C. W. and Yousif, B. F. (2009) Potential of kenaf fibres as reinforcement for tribological applications. Wear, 267 (9-10). pp. 1550-1557. ISSN 0043-1648

Cardona, F. and Moscou, C. (2009) Synthesis and characterization of modified phenolic resins for composites with enhanced mechanical properties. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Cleary, Edward Thomas (2008) Pulsed liquid jet for rock breaking. [USQ Project]

Cecil, Travis (2008) Investigate the best percentage by weight of glass powder, as fillers in phenolic resins using tensile tests. [USQ Project]

Carden, Scott Benjamin (2008) The development of an antigravity arm to assist in the rehabilitation of stroke patients. [USQ Project]

Chin, C. W. and Yousif, B. F. (2008) Adhesive and frictional behaviour of polymeric composites based on kenaf fibre. In: 2nd International Conference on Advanced Tribology (iCAT 2008), 3-5 Dec 2008, Singapore.

Cubero, Samuel N. (2008) Blind search inverse kinematics for controlling all types of serial-link robot arms. In: Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany, pp. 229-244. ISBN 978-3-540-74026-1

Cubero, Samuel N. and Portlock, Joshua N. (2008) Dynamics and control of a VTOL quad-thrust aerial robot. In: Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany, pp. 27-40. ISBN 978-3-540-74026-1

Chee, Su Be and Al Shalabi, Ammar and Yousif, B. F. (2008) On the effect of counterface materials on tribo-behavior of steel wire sliding under dry contact condition. Surface Review and Letters, 15 (4). pp. 355-360. ISSN 0218-625X

Cardona, F. and Ku, H. and Pattarachaiyakoop, N. and Rogers, D. and Trada, M. (2007) Fracture toughness of phenol formaldehyde composites post-cured in microwaves. Journal of Electromagnetic Waves and Applications, 21 (14). pp. 2137-2146. ISSN 0920-5071

Coaker, Warren (2007) How engineers become CEOs - implications for education and training. [USQ Project]

Crowe, Daniel Leigh (2007) Management of physical assets at Purga Quarry. [USQ Project]

Chow, Kai Wen (2007) Implications for engineers aspiring to become top-senior managers. [USQ Project]

Cubero, Samuel and Tjoe, Donal (2007) A low cost vision-guided car for autonomous racing car competitions. In: M2VIP 2005: 12th Annual Conference on Mechatronics and Machine Vision in Practice, 29 Nov-1 Dec 2005, Manila, Philippines.

Churches, Alex and Green, Cliff and Field, Bruce and Wightley, Allan and Green, Lance and van de Loo, Paul and Burvill, Colin and Smith, Warren and Snook, Chris (2007) Creating tomorrow's engineering designers. In: ConnectED 2007: International Conference on Design Education, 9-12 July, 2007, Sydney, Australia.

Craig, Ian and Aravinthan, Vasantha and Baillie, Craig Peter and Beswick, Alan and Barnes, Geoff and Bradbury, Ron and Connell, Luke and Cooper, Paul and Fellows, Christopher and Fitzmaurice, Li and Foley, Joseph P. and Hancock, Nigel and Lamb, David and Morrison, Pippa and Mossad, Ruth and Misra, R. K. and Pittaway, Pam and Prime, Emma and Rees, Steve and Schmidt, Erik and Solomon, David and Symes, Troy and Turnbull, David (2007) Evaporation, seepage and water quality management in storage dams: a review of research methods. Environmental Health, 7 (3). pp. 84-97. ISSN 1444-5212

Chan, Siew-Yuen (2006) Water leakage detection circuit in external chiller unit. [USQ Project]

Chan, Wooi Lieh (2006) Fracture analysis of vinyl ester composites cured under microwave conditions. [USQ Project]

Clarke, Daniel John (2006) The design of a three point linkage implement height control system. [USQ Project]

Campbell, Nicholas (2005) Analysing the effect of speed variation on irrigation efficiency in travelling irrigators. [USQ Project]

Chan, Teck Wai Alan (2005) Computational fluid dynamics (CFD): investigation for improving pigs' housing design. [USQ Project]

Chuah, Yew Pin (2005) Evolutionary structural optimization for multi component structural systems. [USQ Project]

Chia, Wee Chong (2005) Research and development of multi purpose carbide end mill. [USQ Project]

Chew, C. S. and Ku, Harry S. and Baddeley, Douglas and Snook, Chris (2005) Micrographs of the fracture of vinyl ester composites cured by microwaves: pilot study. Journal of Electromagnetic Waves and Applications, 19 (1). pp. 67-82. ISSN 0920-5071

Clarke, Timothy Lewis (2004) An autonomous bird deterrent system. [USQ Project]

Cheah, Siew Lee (2004) Analysis of engine performance using palm oil methyl ester. [USQ Project]

Cubero, Samuel Nacion (2004) A general purpose inverse kinematics algorithm for all manipulators. In: 11th Annual Conference on Mechatronics and Machine Vision in Practice, 28 Nov - 3 Dec 2004 , Macau, China.

Cheng, Y. M. and Ku, Harry S. and Snook, Chris and Baddeley, Douglas (2004) Impact strength of vinyl ester composites cured by microwave irradiation: preliminary results. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 218 (L4). pp. 307-320. ISSN 1464-4207

Coker, Rick (2003) An investigation into the feasibility and application of fibre composites to flatbed semi-trailers. [Thesis (PhD/Research)]

Cubero, Samuel Nacion (2000) A six-legged hybrid walking and wheeled robot. In: Mechatronics and machine vision. Robotics and Mechatronics Series (3). Research Studies Press, Baldock, Hertfordshire, England, pp. 293-302. ISBN 0 86380 261 3

Cubero, Samuel N. and Billingsley, John (1997) Force, compliance and position control for a space frame manipulator. In: MViP 1997: 4th Annual Conference on Mechatronics and Machine Vision in Practice, 23-25 Sep 1997, Toowoomba, Australia.

D

du Preez, Matthew (2012) Simulation of monolayer distribution for use in evaporation reduction. [USQ Project]

Dehkhoda, Sevda and Hood, Michael and Alehossein, Habib and Buttsworth, David (2012) Analytical and experimental study of pressure dynamics in a pulsed water jet device. Flow, Turbulence and Combustion, 89 (1). pp. 97-119. ISSN 1386-6184

Di Bella, Robert Michael (2010) Biogas generation from an anaerobic pond 'abattoir'. [USQ Project]

Donald, Michael Craig (2010) Comparative properties of epoxy/sawdust composites with palm oil cured by microwave and thermal treatment. [USQ Project]

Downing, Matthew (2010) Upon the construction of a remote controlled tracked reconnaissance vehicle. [USQ Project]

Danaelan, D. and Yousif, B. F. (2008) Adhesive wear performance of CFRP multilayered polyester composites under dry/wet contact conditions. Surface Review and Letters, 15 (6). pp. 919-925. ISSN 0218-625X

Davison, Craig and MacLeod, James D. and Strapp, J. Walter and Buttsworth, David R. (2008) Isokinetic total water content probe in a naturally aspirating configuration: initial aerodynamic design and testing. In: 46th AIAA Aerospace Sciences Meeting and Exhibit (AIAA 2008), 7-10 Jan 2008, Reno, NV. United States.

Dunn, Mark T. and Billingsley, John (2007) The use of machine vision for assessment of fodder quality. In: M2VIP 2007: 14th Annual Conference on Mechatronics and Machine Vision in Practice, 3-5 Dec 2007, Xiamen, China.

Davidson, Thomas Peter George (2007) Using tensile tests as benchmark, investigate the best percentage by weight of slg, as fillers, in Phenolic resins post-cured by microwaves. [USQ Project]

Dunn, Mark (2007) Applications of vision sensing in agriculture. [Thesis (PhD/Research)]

Davey, Robert James (2006) Best percentage by weight of micro-spheres as fillers in phenolic resins, with fracture toughness as a benchmark. [USQ Project]

Domrow, Ryan (2005) Development of a mechanical testing system to investigate road deformation. [USQ Project]

Dyke, Geoffrey Wayne (2005) Optimising condenser air extraction to reduce greenhouse gas emissions at the Loy Yang B power station. [USQ Project]

Douglas, Adrian Keith (2005) Mechanical design aspects of a lightweight neonatal retrieval system. [Thesis (PhD/Research)]

Dai, Shao-Cong and Yan, Wenyi and Liu, Hong-Yuan and Mai, Yiu-Wing (2004) Experimental study on z-pin bridging law by pullout test. Composites Science and Technology, 64 (16). pp. 2451-2457. ISSN 0266-3538

Davidson, Timothy (2004) Improving the aerodynamic force measurement system for the USQ gun tunnel. [USQ Project]

Dunn, Mark and Billingsley, John and Finch, Neal (2003) Machine vision classification of animals. In: 10th Annual Conference on Mechatronics and Machine Vision in Practice, 09-11 Dec 2003, Perth, Australia.

Dunn, Mark and Billingsley, John (2003) Machine vision system for counting macadamia nuts. In: 2003 Australasian Conference on Robotics and Automation (ACRA 2003), 1-3 Dec 2003, Brisbane, Australia.

E

Etaati, Amir and Dehghani, Kamran (2013) A study on hot deformation behavior of Ni-42.5Ti-7.5Cu alloy. Materials Chemistry and Physics, 140 (1). pp. 208-215. ISSN 0254-0584

Etaati, Amir and Dehghani, Kamran and Ebrahimi, G. R. and Wang, Hao (2013) Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations. Metals and Materials International, 19 (1). pp. 5-9. ISSN 1598-9623

Eichmann, T. N. and Khan, R. and McIntyre, T. J. and Jacobs, C. and Porat, H. and Buttsworth, D. and Upcroft, B. (2012) Radiometric temperature analysis of the Hayabusa spacecraft re-entry. In: 28th International Symposium on Shock Waves (ISSW 28), 17-22 Jul 2011, Manchester, United Kingdom.

Epaarachchi, J. A. (2011) The effect of viscoelasticity on fatigue behaviour of polymer matrix composites. In: Creep and fatigue in polymer matrix composites. Woodhead Publishing Limited, Cambridge, United Kingdom, pp. 492-513. ISBN 978-1-84569-656-6

Epaarachchi, Jayantha A. and Rathnaweera, Gayan and Canning, John and Stevenson, Michael (2010) Response Fibre Bragg Grating (FBG) strain sensors embedded at different locations through the thickness around a delamination in a composite lamina. In: 7th Asian-Australasian Conference on Composites (ACCM7), 15-18 Nov 2010, Taipei, Taiwan.

Epaarachchi, Jayantha A. and Reushle, Matthew T. (2010) Performance of aluminium/vinylester particulate composite. In: PRICM7: 7th Pacific Rim International Conference on Advanced Materials and Processing, 2-6 Aug 2010, Cairns, Australia.

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

Epaarachchi, J. and Ku, H. and Gohel, K. (2010) A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites. Journal of Composite Materials, 44 (6). pp. 779-788. ISSN 0021-9983

Eddine, Mustapha Jamal (2009) Measurement of fracture toughness, mechanical and electrical loss tangents of calcium carbonate reinforced vinyl ester composites. [USQ Project]

Epaarachchi, Jayantha A. and Birt, Peter (2009) Dynamic behaviour of laterally loaded pultruted composite beams. In: 9th International Conference of the Mechanical and Physical Behaviour of Materials Under Dynamic Loading (DYMAT 2009), 7-11 Sept 2009, Brussels, Belgium.

El-Tayeb, N. S. M. and Yousif, B. F. (2008) Adhesive wear performance of T-OPRP and UT-OPRP composites. Tribology Letters, 32 (3). pp. 199-208. ISSN 1023-8883

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2008) Investigation of embedded near infrared fibre Bragg grating (FBG) sensors (830 nm) in structural health monitoring of glass fibre composite structures. In: 19th International Conference on Optical Fibre Sensors (OFS-19), 15-18 Apr 2008, Perth, Australia.

El-Tayeb, N. S. M. and Yousif, B. F. and Yap, T. C. (2008) An investigation on worn surfaces of chopped glass fibre reinforced polyester through SEM observations. Tribology International, 41 (5). pp. 331-340. ISSN 0301-679X

Epaarachchi, J. A. (2008) Change of dynamic response of pultruded composite components used in advanced composite structures due to fatigue and fracture. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Epaarachchi, J. A. and Karunasena, W. and Aravinthan, T. (2008) Dynamic behavior of hybrid composite bridge girder. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

El Komy, Ahmed (2007) Millmerran Power Station ROM coal blockage removal system. [USQ Project]

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2007) An investigation of the response of embedded near infrared fibre bragg grating (FBG) sensors (830nm) in glass fibre composites under fatigue loading. In: 14th International Conference on Composite Structures (ICCS 14), 19-21 Nov 2007, Melbourne, Australia.

El-Tayeb, N. S. M. and Yousif, B. F. (2007) Evaluation of glass fiber reinforced polyester composite for multi-pass abrasive wear applications. Wear, 262 (9-10). pp. 1140-1151. ISSN 0043-1648

Epaarachchi, Jayantha A. and Karunasena, Warna and Aravinthan, Thiru (2007) Investigation of dynamic behaviour of a hybrid composite bridge girder. In: 14th International Conference on Composite Structures (ICCS 14), 19 - 21 Nov 2007, Melbourne, Australia.

Epaarachchi, Jayantha A. and Clegg, Richard E. and Canning, John (2007) Investigation of the use of near infrared FBG (830nm) sensors for monitoring the structural response of 0/90 woven cloth/CSM glass fibre/vynylester composite under static and fatigue loading. In: HUMS 2007: 5th DSTO International Conference on Health and Usage Monitoring , 19-22 Mar 2007, Melbourne, Australia.

Epaarachchi, Jayantha A. (2006) Assessment of damage accumulation in glass fibre reinforced plastic (GFRP) composites under spectrum fatigue loading. In: 2006 International Conference on Structural Integrity and Failure (SIF2006), 27-29 Sept 2006, Sydney, Australia.

Epaarachchi, Jayantha A. (2006) A study of estimation of damage accumulation of glass fibre reinforce plastic (GFRP) composites under a block loading situation. Composite Structures, 75 (1-4). pp. 88-92. ISSN 0263-8223

Epaarachchi, Jayantha A. and Clegg, Richard (2006) An experimental investigation of the properties of cross-ply laminate used for manufacturing of small aircraft components. Composite Structures, 75 (1-4). pp. 93-99. ISSN 0263-8223

Epaarachchi, Jayantha A. (2006) Effects of static-fatigue (tension) on the tension-tension fatigue life of glass fibre reinforced plastic composites. Composite Structures, 74 (4). pp. 419-425. ISSN 0263-8223

Epaarachchi, Jayantha A. and Clausen, Philip D. (2006) The development of a fatigue loading spectrum for small wind turbine blades. Journal of Wind Engineering and Industrial Aerodynamics, 94. pp. 207-223. ISSN 0167-6105

El-Tayeb, N. S. M. and Yousif, B. F. and Yap, T. C. (2005) Tribological studies of polyester reinforced with CSM 450-R-glass fiber sliding against smooth stainless steel counterface. Wear, 261 (3-4). pp. 443-452. ISSN 0043-1648

Eagle, Michael Allan (2005) Numerical investigation of the thermal efficiency of glass refrigeration doors. [USQ Project]

Epaarachchi, Jayantha A. (2005) Effects of static fatigue on the tension-tension fatigue life of glass / polyester composites. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005): Advances in Applied Mechanics, 16-18 Feb 2005, Melbourne, Australia.

Epaarachchi, Jayantha A. and Clausen, Philip D. (2004) Accelerated full scale fatigue testing of a small composite wind turbine blade using a mechanically operated test rig. In: 2004 Structural Integrity and Fracture International Conference (SIF2004), 26-29 Sept 2004, Brisbane, Australia.

F

Francucci, Gaston and Cardona, Francisco and Manthey, Nathan W. (2013) Cure kinetics of an acrylated epoxidized hemp oil-based bioresin system. Journal of Applied Polymer Science, 128 (3). pp. 2030-2037. ISSN 0021-8995

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2013) Hybrid sandwich panel with natural fibre composite intermediate layer: manufacturing process and significance analysis. Malaysian Journal of Civil Engineering, 25 (Special issue 1). pp. 95-111. ISSN 1823-7843

Filipovic, M. D. and Horner, J. and Crawford, E. J. and Tothill, N. F. H. and White, G. L. (2013) Mass extinction and the structure of the Milky Way. Serbian Astronomical Journal, 187 (187). pp. 43-52. ISSN 1450-698X

Farrington, Jock (2011) Redesign of an FSAE race car’s steering and suspension system. [USQ Project]

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2011) The implementation of statistical inference to study the bending strength of sustainable hybrid sandwich panel composite. Advanced Material Research, 250-253 (1-Apr). pp. 956-961.

Fadhel, M. I. and Abdo, Ramez Abdulwasea and Yousif, B. F. and Zaharim, Azami and Sopian, K. (2011) Thin-layer drying characteristics of banana slices in a force convection indirect solar drying. In: 6th IASME/WSEAS International Conference on Energy and Environment (EE 2011): Recent Researches in Energy and Environment , 23-25 Feb 2011, Cambridge, United Kingdom.

Fu, H. M. and Zhang, H. F. and Wang, H. and Hu, Z. Q. (2008) Cu-based bulk amorphous alloy with larger glass-forming ability and supercooled liquid region. Journal of Alloys and Compounds, 458 (1-2). pp. 390-393. ISSN 0925-8388

Fu, H. M. and Qiu, D. and Zhang, M. X. and Wang, H. and Kelly, P. M. and Taylor, J. A. (2008) The development of a new grain refiner for magnesium alloys using the edge-to-edge model. Journal of Alloys and Compounds, 456 (1-2). pp. 390-394. ISSN 0925-8388

Fu, H. M. and Zhang, H. F. and Wang, Hao and Hu, Z. Q. (2007) Multifarious fracture features of CuZrAlGd(Ag) bulk metallic glasses. Advanced Materials Research, 29-30. pp. 47-50. ISSN 1022-6680

Fulcher, Robert and Snook, Chris (2006) Problem based learning in system design teams. In: AaeE 2006: 17th Annual Conference of the Australasian Association for Engineering Education, 10-13 Dec 2006, Auckland, New Zealand.

Free, Matthew (2006) Mobile manoeuvring robot. [USQ Project]

Freeman, Barry (2006) Steering system and suspension design for a formula SAE-A racer. [USQ Project]

Fu, H. M. and Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2006) In situ TiB-reinforced cu-based bulk metallic glass composites. Scripta Materialia, 54 (11). pp. 1961-1966. ISSN 1359-6462

Finch, N. A. and Murray, P. J. and Dunn, M. T. and Billingsley, J. (2006) Using machine vision classification to control access of animals to water. Animal Production Science, 46 (6-7). pp. 837-839. ISSN 0816-1089

Field, Benjamin J. (2005) Stress analysis of axially loaded perforated steel plates by experimental and finite element methods. [USQ Project]

French, Vivienne Joyce (2005) The investigation into modes of failure of total hip replacements. [USQ Project]

Faulkner, Griffith (2004) Numerical investigation into the aeration of grain silos. [USQ Project]

Fulcher, Robert (2004) Teaching engineering management in a flexible learning environment. In: AaeE 2004: Creating Flexible Learning Environments, 27-29 Sept 2004 , Toowoomba, Australia.

Fulcher, Robert and Snook, Chris (2003) Mechatronic engineering by distance education. In: 10th Annual Conference on Mechatronics and Machine Vision in Practice, 9-11 Dec 2003 , Perth, Western Australia.

Ferdous, C. M. R. and Islam, M. Shahidul and Islam, M. Mainul and Alam, M. M. Asraful and Rahman, A. N. M.Mizanur (2003) Solar photovoltaic technology and Bangladesh. In: 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003), 19-20 Dec 2003, Khulna, Bangladesh.

Fulcher, Robert L. and Snook, Christopher P. (2000) Fast tracking new courses in mechatronic engineering. In: Mechatronics and machine vision. Robotics and Mechatronics (3). Research Studies Press, Baldock, United Kingdom, pp. 3-9. ISBN 0-86380-261-3

G

Ghude, Sarang and Billingsley, John (2012) Iterative fast model control strategy with state constraints: an example of aircraft lateral control. In: 19th International Conference on Mechatronics and Machine Vision in Practice (M2VIP 2012), 28-30 Nov 2012, Auckland, New Zealand.

Goh, Steven and Zhou, Hong and Bullen, Frank and Davey, Kenneth (2012) An assessment of stress factors on engineering academics in a regional context. In: 42nd ASEE/IEEE Frontiers in Education Conference (FIE 2012): Soaring to New Heights in Engineering Education, 3-6 Oct 2012, Seattle, WA. United States.

Goh, Steven and Coaker, Warren and Bullen, Frank (2012) How engineers become CEOs. In: Engineering Leadership Conference (ELC 2012): Passing the Baton - Engineering Australia's Future, 30 May-2 Jun 2012, Adelaide, Australia.

Goh, Steven and Baker, Nelson (2012) Need for a global accord for the postgraduate learning of engineers. In: 13th IACEE World Conference on Continuing Engineering Education (WCCEE 2012), 17-19 May 2012, Valencia, Spain.

Goh, Steven and Worden, John and Zhou, Hong and Clewett, John (2012) Growing pains in the revitalisation of a 2nd level engineering and spatial science PBL course. In: Developments in engineering education standards: advanced curriculum innovations. IGI Publishing (IGI Global), Hershey, PA. United States , pp. 105-126. ISBN 978-1-4666-0951-8

Goh, Steven Chingnam (2012) A qualitative study into the innovation and technology transfer process of a micro-manufacturer within a university-industry collaboration context in regional South-East Queensland (D. Eng.). [Thesis (PhD/Research)]

Goh, Steven and Hartle, Todd and Brodie, Megan (2011) Building leadership capacity of engineering academics in a leadership vacuum constructed within a participatory group to engage a professional body. In: Research in Engineering Education Symposium (REES 2011) , 4-7 Oct 2011, Madrid, Spain.

Goh, Steven and Ku, Harry (2011) Intervening to improve the dissertation of final year engineering research projects. In: 41st ASEE/IEEE Frontiers in Education Conference (FIE 2011): Celebrating 41 Years of Monumental Innovations From Around the World , 12-15 Oct 2011, Rapid City, SD. United States.

Goh, Steven and Hartle, Todd and Brodie, Megan (2011) Perspectives on leadership concepts by engineering academics. In: 41st ASEE/IEEE Frontiers in Education Conference (FIE 2011): Celebrating 41 Years of Monumental Innovations from around the World , 12-15 Oct 2011, Rapid City, SD. United States.

Goh, Steven and Craig, Ian and Muller, Zach (2011) Solar thermal energy alternatives and their application to water heating and air cooling in the meat processing industry. In: SSEE 2011: Escaping Silos, 24–26 Oct 2011, Brisbane, Australia.

Goh, Steven and Bullen, Frank (2011) Engineering faculties in developing and assessing professional competencies for engineers in Australia. In: 39th SEFI Annual Conference: Global Engineering Recognition, Sustainability and Mobility (SEFI 2011), 27-30 Sep 2011, Lisbon, Portugal.

Goh, Steven (2011) Leadership in engineering education from K-12 to university: key to improving diversity in the engineering profession. In: ICWES 15: 15th International Conference of Women Engineers and Scientists , 19-22 Jul 2011, Adelaide, South Australia .

Goh, Steven C. and Jokic, Michael D. and Hartle, Todd (2010) A new engineering management master to address the personal, professional and educational needs of engineering graduates to achieve EA chartered status. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Goh, Steven C. and Worden, John and Zhou, Hong and Clewett, John (2010) Revitalisation of a 2nd level engineering and spatial science PBL course: almost there but... In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Guades, E. J. and Aravinthan, T. and Islam, M. M. (2010) An overview on the application of FRP composites in piling system. In: Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

Goh, Steven and Bullen, Frank (2010) Engineering management education post GFC and Copenhagen: are we on the right track? In: 40th ASEE/IEEE Frontiers in Education Conference (FIE 2010): Celebrating 40 Years of Innovation, 27-30 Oct 2010, Arlington, VA. United States.

Goh, Steven and Ku, Harry (2010) Qualitative methodologies for dummies: engineers in investigating the quality of final year engineering research project. In: 1st Science, Technology, Engineering and Mathematics in Education Conference (STEM 2010), 26-27 Nov 2010, Brisbane, Australia.

Goh, Steven and Worden, John and Zhou, Hong and Cubero, Samuel (2009) A case study on the revitalisation of a 2nd level engineering and spatial science PBL course. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, South Australia.

Goh, Steven and Bullen, Frank (2009) Diversification of engineering management studies in enriching the learning experience for the 21st century global engineer. In: 20th Annual Conference for the Australasian Association for Engineering Education (AaeE 2009): Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Goh, S. and Bullen, F. and Gibbings, P. (2009) A proposed learning journey for the 21st century global engineering manager: an Australian perspective. In: APES 2009: Managing Projects, Programs and Ventures in Times of Uncertainty and Disruptive Change, 19-20 Nov 2009, Sydney, Australia.

Goh, Steven and Park, Sang-Soon (2009) Enabling pathways by enabling cultural and value change in engineering academics. In: Enabling Pathways: 3rd National Conference of Enabling Educators, 25-27 Nov 2009, Toowoomba, Australia.

Grimm, Justin John (2009) Electromagnetic linear actuator - design, manufacture and control. [USQ Project]

Goh, Steven C. (2009) Investing in the future of engineering education infrastructure for sustainability. In: Southern Engineering Conference, 17-18 October 2009, Springfield, Qld, Australia.

Garratt, Blythe Jonathan (2009) The development of a wrist rehabilitation device for movement therapy. [USQ Project]

Gould, Nicholas and Goh, Steven C. (2009) The influencing factors in designing conceptual energy-waste solutions for sustainable housing. In: 2009 Southern Engineering Conference: Infrastructure Investment For a New Economy, 17-18 Oct 2009, Springfield, Qld, Australia.

Genet, Martin and Yan, Wenyi and Tran-Cong, Thanh (2009) Investigation of a hydraulic impact: a technology in rock breaking. Archive of Applied Mechanics, 79 (9). pp. 825-841. ISSN 0939-1533

Golshani, Aliakbar and Tran-Cong, Thanh (2009) Energy analysis of hydraulic fracturing. KSCE Journal of Civil Engineering, 13 (4). pp. 219-224. ISSN 1226-7988

Ghobadian, B. and Rahimi, H. and Nikbakht, A. M. and Najafi, G. and Yusaf, T. F. (2009) Diesel engine performance and exhaust emission analysis using waste cooking biodiesel fuel with an artificial neural network. Renewable Energy, 34 (4). pp. 976-982. ISSN 0960-1481

Ghobadian, Barat and Najafi, Gholamhassan and Rahimi, Hadi and Yusaf, T. F. (2009) Future of renewable energies in Iran. Renewable and Sustainable Energy Reviews, 13 (3). pp. 689-695. ISSN 1364-0321

Gill, N. Singh and Yousif, B. F. (2009) Wear and frictional performance of betelnut fibre-reinforced polyester composite. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (2). pp. 183-194. ISSN 1350-6501

Goh, Steven (2009) Is the current practice in engineering education a sustainable model for creating sustainability-trained engineers. In: SSEE 2009: Solutions for a Sustainable Planet, 22-24 Nov 2009, Melbourne, Australia.

Goh, Steven (2008) A new paradigm for professional development framework and curriculum renewal in engineering management education: a proposal for reform. In: 19th Annual Conference of the Australasian Association for Engineering Education (AaeE 2008): To Industry and Beyond, 7-10 Dec 2008, Yeppoon, Australia.

Goh, Steven C. and Coaker, Warren and Thorpe, David (2008) How engineers become CEOs: implications for education and training. Journal of Achievements in Materials and Manufacturing Engineering, 31 (2). pp. 846-852. ISSN 1734-8412

Goh, Steven and Thorpe, David (2008) A reflection in the innovation and technology transfer experience in a regional micro-manufacturer: a case study. In: 9th Global Congress on Manufacturing and Management (GCMM2008): Towards Excellence in Smart Manufacturing and Engineering Knowledge Management, 12-14 Nov 2008, Gold Coast, Australia.

Goh, Steven and Coaker, Warren and Thorpe, David (2008) How engineers become CEOs: implications for education and training. In: 9th Global Congress on Manufacturing and Management (GCMM2008), 12-14 Nov 2008, Surfers Paradise, Queensland, Australia.

Golshani, Aliakbar and Tran-Cong, Thanh and Buttsworth, David (2008) Impact on a water filled cylinder. In: ACMFMS 2008: Asian Conference on Mechanics of Functional Materials and Structures, 31 Oct-3 Nov 2008, Matsue, Japan.

Goh, Steven and Coaker, Warren and Bullen, Frank (2008) Management education for the 21st century engineering manager: an Australian perspective. In: 38th ASEE/IEEE Frontiers in Education Conference (FIE 2008): Racing Toward Innovation in Engineering Education , 22-25 Oct 2008, Saratoga Springs, NY. United States.

Goh, Steven (2008) A new paradigm in management education for engineers in the 21st century: A proposal for reform. In: Engineering Leadership Conference 2008, 10-12 Sep 2008, Perth, Western Australia.

Goh, Steven and Thorpe, David (2008) An investigation into the innovation and technology transfer process in the SME sector within a university-industry collaboration context. Asian International Journal of Science and Technology in Production and Manufacturing, 1 (2). pp. 1-10. ISSN 1906-151X

Goh, Steven C. (2008) The engineering manager of the 21st century: implications for education and professional development [Keynote address]. In: CELM Victoria Seminar Series (March 2008), 12 Mar 2008, Melbourne, Australia.

Goh, S. and Ku, H. and Ang, S. L. (2008) Prediction of crushing stress in composite materials. Journal of Composite Materials, 42 (5). pp. 467-484. ISSN 0021-9983

Golshani, Aliakbar and Tran-Cong, Thanh (2008) Energy analysis of hydraulic fracturing. In: 12th International Conference of IACMAG, 1-6 Oct 2008, Goa, India.

Goh, Steven (2007) 2020 VISION and its implication for engineering management education. In: AaeE 2007: 18th Annual Conference of the Australasian Association for Engineering Education, 9-13 Dec 2007, Melbourne, Australia.

Gustafson, Adrian Mark (2007) Investigation of a new generation degradable implant material. [USQ Project]

Golshani, Aliakbar and Tran-Cong, Thanh (2006) Modelling a borehole subjected to fluid pressure. In: 2006 International Conference on Nonlinear Analysis & Engineering Mechanics Today, 11-14 Dec 2006, Ho Chi Minh City, Vietnam.

Grassick, Bruce (2006) Design and construction of a solar collector for teaching purposes. [USQ Project]

Gurney, Richard Noel (2006) Best percentage weight of microspheres as fillers in resin using three-point bending test. [USQ Project]

Gribble, Brett (2006) Stress relieving furnace modelling and analysis. [USQ Project]

Goozee, R. J. and Jacobs, P. A. and Buttsworth, D. R. (2006) Simulation of a complete reflected shock tunnel showing a vortex mechanism for flow contamination. Shock Waves, 15 (3-4). pp. 165-176. ISSN 0938-1287

Golshani, Aliakbar and Okui, Yoshiaki and Oda, Masanobu and Takemura, Takato (2006) A micromechanical model for brittle failure of rock and its relation to crack growth observed in trixial compression tests of granite. Mechanics of Materials, 38 (4). pp. 287-303. ISSN 0167-6636

Grant, Robert Kenneth (2005) A study of the ground and vegetation effects on the propagation of road traffic noise in south east Queensland. [USQ Project]

Gillies, Ross Donald (2005) Investigation into the non-invasive monitoring of blood glucose levels in people with diabetes. [USQ Project]

Goh, Yaw Siong Oliver (2004) Reduction of noise transmission in The Adephi, Singapore. [USQ Project]

Goodger, Anthony Maldon (2004) The formation of nitrogen oxides in a pulverised coal boiler. [USQ Project]

Guo, W. H. and Lim, S. Y. E. and Fok, S. C. and Chan, G. Y. C. (2004) Virtual reality for memory rehabilitation. International Journal of Computer Applications in Technology, 21 (1/2). pp. 32-37. ISSN 0952-8091

Georg, T. and Xiang, W. and Fok, Sai-Cheong (2003) An agent-based framework for the virtual prototyping of fluid power systems. In: 1st International Conference on Computational Methods in Fluid Power Technology: Methods for Solving Practical Problems in Design and Control, 26-28 Nov 2003, Melbourne, Australia.

H

Hafizi, Mohd Zohari and Epaarachchi, Jayantha Ananda and Lau, K. T. (2013) Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test. Structural Health Monitoring: Research and Applications, 558 (558). pp. 65-75. ISSN 1013-9826

Horner, J. and Hinse, T. C. and Wittenmyer, R. A. and Marshall, J. P. and Tinney, C. G. (2012) A dynamical analysis of the proposed circumbinary HWVirginis planetary system. Monthly Notices of the Royal Astronomical Society, 427 (4). pp. 2812-2823. ISSN 0035-8711

Ho, Mei-po and Wang, Hao and Lee, Joong-Hee and Ho, Chun-kit and Lau, Kin-tak and Leng, Jinsong and Hui, David (2012) Critical factors on manufacturing processes of natural fibre composites. Composites Part B: Engineering, 43 (8). pp. 3549-3562. ISSN 1359-8368

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Hoang-Trieu, T.-T. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2012) Compact local integrated RBF stencil based on finite volume formulation for second-order differential problems. In: 4th International Conference on Computational Methods (ICCM 2012), 25-28 Nov 2012, Gold Coast, Australia.

Ho, M. P. and Wang, H. and Lau, K. T. and Jayaraman, K. and Bhattacharyya, D. (2012) Mechanical properties of a bamboo charcoal reinforced polylactic acid composite. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Hairuddin, A. Aziz and Yusaf, Talal F. and Wandel, Andrew P. (2012) HCCI engine: numerical and experimental approach. In: USQ Combustion Meeting, 26 Sep 2012, Toowoomba, Australia.

Horner, J. and Wittenmyer, R. A. and Hinse, T. C. and Tinney, C. G. (2012) A detailed investigation of the proposed NN Serpentis planetary system. Monthly Notices of the Royal Astronomical Society, 425 (1). pp. 749-756. ISSN 0035-8711

Hashempour, Javad and Sharifian, Ahmad (2012) Potentials of metal mesh to contain bushfires. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) Modal analysis of high frequency acoustic signal approach for progressive failure monitoring in thin composite plates. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Horner, J. and Muller, T. G. and Lykawka, P. S. (2012) (1173) Anchises - thermophysical and dynamical studies of a dynamically unstable Jovian Trojan. Monthly Notices of the Royal Astronomical Society, 423 (3). pp. 2587-2596. ISSN 0035-8711

Horner, J. and Jones, B. W. (2012) Jupiter: friend or foe? IV: The influence of orbital eccentricity and inclination. International Journal of Astrobiology, 11 (3). pp. 147-156. ISSN 1473-5504

Horner, J. and Lykawka, P. S. and Bannister, M. T. and Francis, P. (2012) 2008 LC18: a potentially unstable Neptune Trojan. Monthly Notices of the Royal Astronomical Society, 422 (3). pp. 2145-2151. ISSN 0035-8711

Horner, J. and Lykawka, P. S. (2012) 2004 KV18: a visitor from the scattered disc to the Neptune Trojan population. Monthly Notices of the Royal Astronomical Society, 426 (1). pp. 159-166. ISSN 0035-8711

Ho, Mei-po and Lau, Kin-tak (2012) Design of an impact resistant glass fibre/epoxy composites using short silk fibres. Materials and Design, 35 (1). pp. 664-669. ISSN 0261-3069

Ho, Mei-po and Wang, Hao and Lau, Kin-tak (2012) Effect of degumming time on silkworm silk fibre for biodegradable polymer composites. Applied Surface Science, 258 (8). pp. 3948-3955. ISSN 0169-4332

Hafizi, Z. M. and Epaarachchi, J. and Nizwan, C. K. E. and Lau, K. T. (2012) Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study. IOP Conference Series: Materials Science and Engineering, 36 (1). ISSN 1757-8981

Hoang-Trieu, T.-T. and Mai-Duy, N. and Tran-Cong, T. (2012) Several compact local stencils based on integrated RBFs for fourth-order ODEs and PDEs. CMES: Computer Modeling in Engineering and Sciences, 84 (2). pp. 171-203. ISSN 1526-1492

Ho, Mei-po and Wang, Hao and Lau, Kin-tak (2012) Thermal properties and structure conformation on silkworm silk fibre. In: Composites Australia and CRC-ACS, 2012 Conference: Diversity in Composite, 15-16 Mar 2012, Leura, Australia.

Hairuddin, A. Aziz and Yusaf, Talal F. and Wandel, Andrew P. (2011) Predicting the combustion behaviour of a diesel HCCI engine using a zero-dimensional single-zone model. In: 11th Australian Combustion Symposium (ACS 2011), 29 Nov-1 Dec 2011, Newcastle, Australia.

Heaton, Erin (2011) Use of vibration signature in structural health monitoring (composite/internal damages). [USQ Project]

Ho, Mei-Po and Lau, Kin-Tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

Ho, Mei-Po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Mechanical properties of an injected silk fibre reinforced PLA composite. In: 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX), 14-17 Jan 2011, Auckland, New Zealand.

Ho, M. P. and Lau, K. T. and Wang, H. (2011) Effect of degumming on tussah silk fibre. In: 18th International Conference on Composite Materials (ICCM 2011): Composite Materials: Key to the Future, 21-26 Aug 2011, Jeju, Korea.

Hua, Fuan and Zhang, Chaoyi and Li, Qiang and Yu, Baoyi and Liu, Weihua and Li, Runxia and Xie, Shuisheng and Huang, Guojie and Cheng, Lei and Fu, Yao and Wang, Hao (2011) Numerical simulation of rolling process and microstructure evolution of AM50 Mg alloy during hot rolling process. Advanced Materials Research, 291-294. pp. 449-454. ISSN 1022-6680

Ho-Minh, D. and Le-Cao, K. and Mai-Duy, N. and Tran-Cong, T. (2010) Simulation of fluid flows at high Reynolds/Rayleigh numbers using integrated radial basis functions. In: 17th Australasian Fluid Mechanics Conference (AFMC 2010), 5-9 Dec 2010, Auckland, New Zealand.

Hairuddin, A. Aziz and Wandel, Andrew P. and Yusaf, Talal (2010) Hydrogen and natural gas comparison in diesel HCCI engines -a review. In: 2010 Southern Region Engineering Conference (SREC2010), 11-12 Nov 2010, Toowoomba, Australia.

Haenke, Michael (2010) The development of a wind and solar power calculator for use within the private sector. [USQ Project]

Ho-Minh, D. and Mai-Duy, N. and Tran-Cong, T. (2010) A cartesian-grid integrated-RBF method for viscoelastic flows. In: 9th World Congress on Computational Mechanics and 4th Asian-Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), 19-23 Jul 2010, Sydney, Australia.

Ho-Minh, D. and Mai-Duy, N. and Tran-Cong, T. (2010) A Cartesian-grid integrated-RBF Galerkin technique. In: Recent studies in meshless and other novel computational methods. Tech Science Press, Duluth, GA. USA, pp. 87-102. ISBN 978-0-9824205-4-6

Ho-Minh, D. and Mai-Duy, Nam and Tran-Cong, Thanh (2010) Galerkin/collocation methods based on 1D-integrated-RBFNs for viscoelastic flows. CMES: Computer Modeling in Engineering and Sciences, 70 (3). pp. 217-251. ISSN 1526-1492

Hasna, Abdallah M. (2009) Chemical engineering industry transition towards sustainability. In: SSEE 2009: Solutions for a Sustainable Planet, 22-24 Nov 2009, Melbourne, Australia.

Huq, Rezwanul (2009) Flexural strength of three types of glass powder reinforced vinyl ester composites. [USQ Project]

Horner, J. and Jones, B. W. (2009) Jupiter: friend or foe? II: The centaurs. International Journal of Astrobiology , 8 (2). pp. 75-80. ISSN 1473-5504

Ho-Minh, D. and Mai-Duy, Nam and Tran-Cong, Thanh (2009) A Galerkin-RBF approach for the streamfunction-vorticity-temperature formulation of natural convection in 2D enclosured domains. CMES: Computer Modeling in Engineering and Sciences, 44 (3). pp. 219-248. ISSN 1526-1492

Hasna, Abdallah M. (2009) Climate change, contemporary society and engineering practice: a sustainability journey. The International Journal of Climate Change: Impacts and Responses, 1 (4). pp. 139-150. ISSN 1835-7156

Hasna, Abdallah M. (2009) Contemporary society, technology and sustainability. International Journal of Technology, Knowledge and Society, 5 (1). pp. 13-20. ISSN 1832-3669

Hasna, Abdallah M. (2009) Sustainability and economic theory: an organism in premise. International Journal of Knowledge, Culture and Change Management, 9 (11). pp. 1-13. ISSN 1447-9524

Hancock, Nigel and Pittaway, Pam and Symes, Troy (2009) Towards a biophysical understanding of observed performance of evaporation suppressant films applied to agricultural water storages - first analyses. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Horner, Jonathan and Mousis, Olivier and Alibert, Yann and Lunine, Jonathan I. and Blanc, Michel (2008) Constraints from deuterium on the formation of icy bodies in the Jovian system and beyond. Planetary and Space Science , 56 (12). pp. 1585-1595. ISSN 0032-0633

Horner, J. and Jones, B. W. (2008) Jupiter: friend or foe? I: The asteroids. International Journal of Astrobiology , 7 (3/4). pp. 251-261. ISSN 1473-5504

Horner, Jonti and Jones, Barrie W. (2008) Jupiter: friend or foe? Astronomy and Geophysics, 49 (1). 1.22-1.27. ISSN 1366-8781

Hasna, Abdallah M. (2008) A review of sustainability assessment methods in engineering. The International Journal of Environmental, Cultural, Economic & Social Sustainability, 5. ISSN 1832-2077

Holzheimer, Carson Keith (2007) Automation of the rollingstock twist test. [USQ Project]

Hicks, Kevin Charles (2007) Design of aeration ploughing tool for poultry litter within shed to reduce odour generation. [USQ Project]

Hansen, Luke (2007) The use of waste cooking oil as an alternative fuel for the diesel engine. [USQ Project]

Hesse, Deike and Dunn, Mark and Billingsley, John and Withers, Kerry and Klingenspor, Martin and Rozman, Jan (2007) Strain specific differences in parameters of energy balance are related to the onset of diet-induced obesity in young male mice. In: 15th European Congress on Obesity, 22-25 Apr 2007, Budapest, Hungary.

Ho-Minh, D. and Mai-Duy, Nam and Tran-Cong, Thanh (2007) Analysis of viscoelastic flow by a radial basis function networks method. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Hayllor, Nicholas (2006) Development of a low cost GPS guidance system for use in agriculture. [USQ Project]

He, Mingqian Belinda (2006) Analysis of the recycling method for aluminum soda cans. [USQ Project]

Hamid, H. A. and Yusaf, T. and Yusof, Z. M. (2006) An investigation on the improvement of the operation of Tenom Pangi HPP cooling power system. In: International Conference on Energy and Environment 2006 (ICEE 2006), 28-30 Aug 2006, Kajang, Malaysia.

Harber, Matthew (2005) Development of a drivetrain system for a formula SAE-A race car. [USQ Project]

Heng, Hern (2004) Design of structural glass fitting for seismic condition. [USQ Project]

Hockings, Peter (2004) Fast-response piezoresistive pressure transducers for thermofluids experiments. [USQ Project]

I

Islam, Md Mainul and Kim, Ho Sung (2012) Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior. Journal of Sandwich Structures and Materials, 14 (1). pp. 111-127. ISSN 1099-6362

Islam, Md Mainul and Aravinthan, Thiru (2010) Behaviour of structural fibre composite sandwich panels under point load and uniformly distributed load. Composite Structures, 93 (1). pp. 206-215. ISSN 0263-8223

Islam, Md Mainul and Kim, Ho Sung (2010) Manufacturing and behaviour of sandwich composites made of starch as binder for core and adhesive between core and skins. In: 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010), 24-26 Sept 2010, Kottayam, Kerala, India.

Islam, Md Mainul (2009) Behaviour of innovative fibre composite sandwich panels. In: Workshop on Life Cycle Assessment of Sustainable FRP Materials, 14 Dec 2009, Saitama, Japan.

Inderbitzin, Martin David (2006) Design review and analysis of Collinsville power station coal handling plant. [USQ Project]

Islam, Md Mainul and Ali, Md Nawsher and Mia, Sobahan (2004) Evaluation of the properties of raw materials and products of briquetting machine. In: 2nd BSME-ASME International Conference on Thermal Engineering, 2-4 Jan 2004, Dhaka, Bangladesh.

Islam, Md Mainul and Khan, Kamrujjaman and Ali, Md Nawsher and Islam, Md Shahidul (2003) An investigation on the raw materials and products of the briquetting machine. In: 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003), 19-20 Dec 2003 , Khulna, Bangladesh.

J

Jesshope, Douglas James (2012) Development of an electronically controlled thruster. [USQ Project]

Jokic, Michael D. and Wandel, Andrew P. and Kist, Alexander A. (2010) Which version art thou? Configuration management in engineering education. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Jeffery, Simon (2009) Review of failure mode, effect and criticality analysis (FMECA) on major equipment of the crushing and screening plant at the BORAL Quarry at Ormeau, Queensland. [USQ Project]

Jones, Bruce Thomas (2007) Dragline maintenance engineering. [USQ Project]

Janusaitis, Stephen (2006) Impact response of flat and perforated plate. [USQ Project]

Janke, Scott (2005) Analysis of a sheet metal bucket elevator head. [USQ Project]

Jokic, Michael D. and Longuski, James M. (2004) Design of tether sling for human transportation systems between Earth and Mars. Journal of Spacecraft and Rockets, 41 (6). 1010-1015 . ISSN 0022-4650

Jong, Hua Kwan (2004) Safety management system. [USQ Project]

Jokic, Michael D. and Daniel, W. J. T. (2004) Aerogravity assist maneuvering of a tethered satellite system. Journal of Spacecraft and Rockets, 41 (4). pp. 614-621. ISSN 0022-4650

K

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. and Followell, D. and Birt, P. (2013) Use of fixed wavelength Fibre-Bragg Grating (FBG) filters to capture time domain data from the distorted spectrum of an embedded FBG sensor to estimate strain with an artificial neural network. Sensors and Actuators A: Physical, 194. pp. 1-7. ISSN 0924-4247

Kabir, Mohammad Mazedul and Islam, Md Mainul and Wang, Hao (2013) Mechanical and thermal properties of jute fibre reinforced composites. Journal of Multifunctional Composites, 1 (1). pp. 71-77. ISSN 2168-4246

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Lau, K. T. (2013) Prediction of obsolete FBG sensor using ANN for efficient and robust operation of SHM systems. In: 4th Asia-Pacific Workshop on Structural Health Monitoring, 5-7 Dec 2012, Melbourne, Australia.

Karimkashi, Shervin and Kermani, Mohammad J. and Sharifian, Ahmad and Hashempour, Javad (2012) Numerical computation of pressure drop across an off supplementary firing burner in heat recovery steam generator. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Karunasena, H. C. P. and Senadeera, W. and Gu, Y. T. and Brown, R. J. (2012) A coupled SPH-DEM model for fluid and solid mechanics of apple parenchyma cells during drying. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Kahandawa, G. C. and Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) Detecting delamination in a composite structure using an embedded FBG-AE hybrid system. In: 7th Australasian Congress on Applied Mechanics (ACAM 2012), 9-12 Dec 2012, Adelaide, Australia.

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. and Lau, K. T. (2012) Optimized FBG sensor network for efficient detection of a delamination in FRP structures. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Kahandawa, Gayan Chanaka (2012) Monitoring damage in advanced composite structures using embedded fibre optic sensors. [Thesis (PhD/Research)]

Kane, Stephen R. and Horner, Jonathan and von Braun, Kaspar (2012) Cyclic transit probabilities of long-period eccentric planets due to periastron precession. The Astrophysical Journal, 757 (1). pp. 1-6. ISSN 0004-637X

Kahandawa, Gayan C. and Epaarachchi, Jayantha and Wang, Hao and Lau, K. T. (2012) Use of FBG sensors for SHM in aerospace structures. Photonic Sensors, 2 (3). pp. 203-214. ISSN 1674-9251

Ku, H. and Fulcher, R. (2012) Using computer software packages to enhance the teaching in engineering management science: part 3 - simulation. Computer Applications in Engineering Education, 20 (3). pp. 547-552. ISSN 1099-0542

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. and Aravinthan, T. (2012) Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites. Composites Part B: Engineering, 43 (2). pp. 159-169. ISSN 1359-8368

Ku, H. and Fulcher, R. (2012) Using computer software packages to enhance the teaching in engineering management science: part 2 - programming techniques. Computer Applications in Engineering Education, 20 ( 1). pp. 114-123. ISSN 1099-0542

Kiani, Mostafa Kiani Deh and Ghobadian, Barat and Ommi, Fathollah and Najafi, Gholamhassan and Yusaf, Talal (2012) Artificial neural networks approach for the prediction of thermal balance of SI engine using ethanol-gasoline blends. In: 2012 International Cross-Domain Conference and Workshop on Availability, Reliability, and Security (CD-ARES 2012), 20-24 Aug 2012, Prague, Czech Republic.

Kabir, Mohammad Mazedul and Wang, Hao and Lau, Alan and Cardona, Francisco and Aravinthan, Thiru (2012) Compressive properties of chemically-treated hemp fibre reinforced composites. In: Composites Australia and CRC-ACS, 2012 Conference: Diversity in Composite, 15-16 Mar 2012, Leura, Australia.

Ku, H. and Wong, P. and Huang, J. and Fung, H. and Trada, M. (2012) Flexural properties of epoxy composites filled with glass powder: preliminary results. Advanced Material Research, 410. pp. 309-312. ISSN 1022-6680

Ku, H. and Zhou, Hong and Wong, Peter and Su, Gang and Vadher, Jayent (2012) Modeling the flexural properties of SLG reinforced phenol formaldehyde composites using Langrage’s Method. Advanced Materials Research, 410. pp. 305-308. ISSN 1022-6680

Ku, Harry S. (2012) Review on using packages to enhance the teaching of critical path networks. In: 2012 International MultiConference of Engineers and Computer Scientists (IMECS 2012), 14-16 Mar 2012, Hong Kong, China.

Kilian, Simone (2011) Sugarcane bagasse reinforced thermoplastic composites. [USQ Project]

Ku, H. and Ahfock, T. and Yusaf, T. (2011) Remote access laboratories in Australia and Europe. European Journal of Engineering Education, 36 (3). pp. 253-268. ISSN 0304-3797

Ku, H. and Wang, H. and Pattarachaiyakoop, N. and Trada, M. (2011) A review on the tensile properties of natural fiber reinforced polymer composites. Composites Part B: Engineering, 42 (4). pp. 856-873. ISSN 1359-8368

Kabir, M. M. and Wang, H. and Aravinthan, T. and Cardona, F. and Lau, K. -T. (2011) Effects of natural fibre surface on composite properties: a review. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE2011) , 27-29 Apr 2011, Brisbane, Australia.

Ku, H. (2011) The process of updating production engineering in an Australian regional university excellence in developing e-learning. In: 2011 International MultiConference of Engineers and Computer Scientists (IMECS 2011) , 16-18 Mar 2011, Kowloon, Hong Kong.

Ku, H. and Wong, P. and Maxwell, A. and Huang, J. and Fung, H. and Mohan, T. (2011) A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

Ku, H. and Goh, S. and Ahfock, A. (2011) Flexible engineering degree programs with remote access laboratories in an Australian regional university known for its excellence in e-learning. Computer Applications in Engineering Education, 19 (1). pp. 18-25. ISSN 1099-0542

Ku, H. and Wong, P. and Huang, J. and Fung, H. and Mohan, T. (2011) Tensile tests of glass powder reinforced epoxy composites: pilot study. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

Ku, H. and Fulcher, R. and Xiang, W. (2011) Using computer software packages to enhance the teaching of engineering management science: part 1 - critical path networks. Computer Applications in Engineering Education, 19 (1). pp. 26-39. ISSN 1061-3773

Kabir, M. M. and Wang, H. and Cardona, F. and Aravinthan, T. (2011) Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. (2011) Identification of distortions to FBG spectrum using FBG fixed filters. In: 18th International Conference on Composite Materials (ICCM 2011): Composite Materials: Key to the Future, 21-26 Aug 2011, Jeju, Korea.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Followell, David and Birt, Peter and Canning, John and Stevenson, Michael (2010) An investigation of spectral response of embedded Fibre Bragg Grating (FBG) sensors in a hollow composite cylindrical beam under pure torsion and combined loading. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Australia.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Canning, John (2010) Effects of the self distortions of embedded FBG sensors on spectral response due to torsional and combined loads. In: 3rd Asia-Pacific Workshop on Structural Health Monitoring (APWSHM 2010), 30 Nov-2 Dec 2010, Tokyo, Japan.

Ku, H. S-L. and Mustapha, U. and Goh, S. (2010) Literature review of past and present performance of Nigerian manufacturing sector. In: IMechE 2010: Institution of Mechanical Engineers.

Ku, Harry S. and Goh, Steven C. (2010) Preliminary results on literature review skills of students doing capstone projects. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Queensland, Australia.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Aravinthan, Thiru (2010) The developments of structural health/integrity monitoring systems using FBG sensors at CEEFC of USQ. In: Southern Region Engineering Conference (SREC 2010) , 11-12 Nov 2010, Toowoomba, Australia.

Kirkland, Rhys (2010) The development of a small scale gas turbine to assist in the analysis of coal seam gas as an alternative stationary jet fuel for Australia. [USQ Project]

Ku, H. and Trada, M. and Huq, R. (2010) A pilot study on the flexural properties of vinyl ester composites filled with glass powder. Advanced Materials Research, 123-125. pp. 3-6. ISSN 1022-6680

Ku, H. and Cardona, F. and Rogers, D. and Munoz, J.-C. (2010) Development of polymer network of phenolic and epoxies resins mixed with linseed oil: pilot study. Journal of Materials Engineering and Performance, 19 (6). pp. 912-919. ISSN 1059-9495

Kittipoomwong, Prakorn and See, Howard and Mai-Duy, Nam (2010) Dynamic simulation of non-spherical particulate suspensions. Rheologica Acta, 49 (6). pp. 597-606. ISSN 0035-4511

Ku, Siu Lung Harry and Wen, Peng and Xiang, Wei (2010) Engineering education in China and Australia: addressing the demand-supply gap. Hong Kong Institution of Engineers Transactions, 17 (2). pp. 20-26. ISSN 1023-697X

Ku, H. and Goh, S. (2010) Final year engineering projects in Australia and Europe. European Journal of Engineering Education, 35 (2). pp. 161-173. ISSN 0304-3797

Ku, H. and Trada, M. and Nixon, R. and Wong, P. (2010) Flexural properties of phenolic resin reinforced with glass powder: preliminary results. Journal of Applied Polymer Science, 116 (1). pp. 347-354. ISSN 0021-8995

Ku, H. and Kota, V. and Trada, M. (2010) Optimum percentage of fly ash reinforcement in vinyl ester composites. Journal of Materials in Civil Engineering, 22 (1). pp. 104-107. ISSN 0899-1561

Ku, Harry and Wen, Paul and Xiang, Wei and Goh, Steven (2009) Engineering education - undergraduate and masters: China and down under. In: 20th Annual Conference for the Australasian Association for Engineering Education (AaeE 2009): Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Ku, Harry Siu-Lung and Cardona, Francisco and Trada, Mohar and Vigier, Gurlaume (2009) Flexural properties of sawdust reinforced phenolic composites: pilot study. Journal of Applied Polymer Science, 114 (3). pp. 1927-1934. ISSN 0021-8995

Kirsch, Joshua (2009) Design of a small wind turbine for electric power generation(1-5kW). [USQ Project]

Ku, Harry S. and Trada, Mohan and Zong, Xuejin and Wong, Peter (2009) Flexural properties of phenolic resin reinforced with glass powder. In: ICAST 2009: 20th International Conference on Adaptive Structures and Technologies , 20-22 Oct 2009, Shatin, Hong Kong.

Kuan, Siew Yeng (2009) Design, construction and operation of the floating roof tank. [USQ Project]

Korowa, Geoffrey (2009) Fracture toughness of glass powder reinforced vinyl ester resin. [USQ Project]

Ku, H. and Xiang, W. and Pattarachaiyakoop, N. (2009) Mathematical modeling of the fracture toughness of phenol formaldehyde composites reinforced with E-spheres. Advanced Materials Research, 79-82. pp. 1165-1168. ISSN 1022-6680

Ku, H. and Jacobson, W. and Trada, M. and Cardona, F. and Rogers, D. (2008) Tensile tests of phenol formaldehyde SLG reinforced composites: pilot study. Journal of Composite Materials, 42 (26). pp. 2783-2793. ISSN 0021-9983

Ku, H. and Cardona, F. and Ball, J. and Jacobson, W. and Trada, M. (2008) Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study. Journal of Composite Materials, 42 (19). pp. 2083-2095. ISSN 0021-9983

Kenna, Brian (2008) Water metering and revenue protection. [USQ Project]

Ku, H. and Cardona, F. and Rogers, D. and Vandenbroucke, A. (2008) Effects of EPON on mechanical and thermal properties of epoxy resins. In: ICMMSE 2008: International Conference on Multifunctional Materials and Structures, 28-31 Jul 2008, Hong Kong.

Ku, Harry and Rogers, David and Davey, Robert and Cardona, Francisco and Trada, Mohan (2008) Fracture toughness of phenol formaldehyde composites: pilot study. Journal of Materials Engineering and Performance, 17 (1). pp. 85-90. ISSN 1059-9495

Ku, Harry S. and Yusaf, Talal (2008) Processing of composites using variable and fixed frequency microwave facilities. Progress in Electromagnetic Research B, PIERB . pp. 185-205. ISSN 1937-6472

Ku, H. S. (2008) Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation. Journal of Electromagnetic Waves and Applications, 22 (1). pp. 69-84. ISSN 0920-5071

Ku, H. and Chan, W. L. and Trada, M. and Baddeley, D. (2007) An evaluation of fracture toughness of vinyl ester composites cured under microwave conditions. Journal of Materials Engineering and Performance, 16 (6). pp. 741-745. ISSN 1059-9495

Khennane, Amar and Tran-Cong, Thanh (2007) Timoshenko beam-solution in terms of integrated radial basis functions. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

Kleynhans, Claudius Justus (2007) Design and review of Millmerran coal handling plant. [USQ Project]

Ku, Harry S. and Fulcher, Robert (2007) The process of updating engineering management science in an Australian regional university excellence in developing e-learning. European Journal of Engineering Education, 32 (5). pp. 527-538. ISSN 0304-3797

Ku, Harry S. and Ang, Soh Fong and Snook, Chris and Baddeley, Douglas (2007) Micrographs of fractured vinyl ester composites. Journal of Reinforced Plastics and Composites, 26 (11). pp. 1111-1134. ISSN 0731-6844

Ku, H. and Trada, M. and Puttgunta, V. C. (2007) Mechanical properties of vinyl ester composites cured by microwave irradiation: pilot study. Key Engineering Materials, 334-33. pp. 537-540. ISSN 1013-9826

Ku, H. and Trada, M. and Puttgunta, V. C. and Kota, V. (2007) Yield and tensile strength of vinyl ester composites cured by microwaves. Journal of Electromagnetic Waves and Applications, 21 (4). pp. 517-526. ISSN 0920-5071

Ku, Harry S. (2006) Productivity improvement of composites processing through the use of industrial microwave technologies. Progress in Electromagnetics Research (PIER), PIER 6. pp. 267-285. ISSN 1559-8985

Kruger, Scott (2006) The design and optimisation of a prototype sailplane. [USQ Project]

Ku, Harry S. and Chia, Wee Chong (2006) Design of multi-purpose carbide end mill. Institution of Engineers, Malaysia. Journal, 67 (2). pp. 34-40. ISSN 0126-513X

Ku, Harry S. and Tsang, Shing Hin and Baddeley, Douglas and Snook, Chris (2006) Short bar tests for vinyl ester particulate reinforced composites cured by microwaves. Australian Journal of Structural Engineering, 7 (1). pp. 65-73. ISSN 1328-7982

Ku, Harry S. and Puttgunta, V. C. and Trada, Mohan (2006) Young's modulus of vinyl ester composites cured by microwave irradiation: preliminary results. Journal of Electromagnetic Waves and Applications, 20 (14). pp. 1911-1924. ISSN 0920-5071

Ku, Harry S. and Cheng, Y. M. and Snook, Chris and Baddeley, Douglas (2005) Drop weight impact test fracture of vinyl ester composites: micrographs of pilot study. Journal of Composite Materials, 39 (18). pp. 1607-1620. ISSN 0021-9983

Ku, Harry S. and Siores, Elias and Ball, James A. R. (2005) Application of variable frequency microwave (VFM) to adhesives. Journal of Electromagnetic Waves and Applications, 19 (11). pp. 1467-1484. ISSN 0920-5071

Ku, Harry S. (2005) Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation. Journal of Reinforced Plastics and Composites, 24 (10). pp. 1035-1049. ISSN 0731-6844

Ku, Harry S. and Baddeley, Douglas and Snook, Chris and Chew, C. S. (2005) Fracture toughness of vinyl ester composites cured by microwave irradiation: preliminary results. Journal of Reinforced Plastics and Composites, 24 (11). pp. 1181-1202. ISSN 0731-6844

Ku, Harry S. and Siores, Elias (2004) Shrinkage reduction of thermoset matrix particle reinforced composites during curing using microwaves irradiation. Transactions, Hong Kong Institution of Engineers, 11 (3). pp. 29-34. ISSN 1023-697X

Ku, Harry S. and Widjaya, Budiman and Lee, Kin Fung and Li, Chun Wai (2004) Thermal analysis comparison between three random glass fibre-reinforced thermoplastic matrix composites bonded by adhesives using microwaves. Journal of Reinforced Plastics and Composites, 23 (3). 1443-1460. ISSN 0731-6844

Khoo, L. P. and Cai, Y. Y. and Xiong, Z. W. and Lim, Y. L. and Wahlqvist, M. L. and Fok, S. C. (2004) Computation tools for the combat of cardiovascular heart disease. International Journal of Computer Applications in Technology, 21 (1-2). pp. 16-22. ISSN 0952-8091

Ku, H. (2003) Curing vinyl ester particle-reinforced composites using microwaves. Journal of Composite Materials, 37 (22). pp. 2027-2042. ISSN 0021-9983

Ku, H. S. and Siu, F. and Siores, E. and Ball, J. A. R. (2003) Variable frequency microwave (VFM) processing facilities and application in processing thermoplastic matrix composites. Journal of Materials Processing Technology, 139 (1-3 S). pp. 291-295. ISSN 0924-0136

Ku, Harry S. (2003) Contrast joints of glass-fibre with carbon-fibre reinforced polystyrene composite bonded by microwave irradiation. Transactions, Hong Kong Institution of Engineers, 10 (2). pp. 10-16. ISSN 1023-697X

Ku, Harry S. and Lee, Kin Fung and Li, Chun Wai (2003) Thermal analysis of joining thermoplastic matrix composites using microwaves. Transactions, Hong Kong Institution of Engineers, 10 (1). pp. 14-20. ISSN 1023-697X

Khan, Kamrujjaman and Islam, Md Mainul and Rahman, M. L. and Ali, Md Nawsher (2003) An overview of energy profile for Bangladesh: past, present and future uses. In: 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003), 19-20 Dec 2003, Khulna, Bangladesh.

Ku, Harry S. (2003) Joining of thirty three percent by weight random carbon fibre reinforced low density polyethylene using variable frequency microwave. Journal of The Institution of Engineers, Singapore, 43 (1). pp. 20-25. ISSN 0377-7464

Ku, Harry S. and Siores, Elias and Ball, James A. R. and Taube, Alex and Siu, Fred (2003) Lap shear strength comparison between different random glass fibre reinforced thermoplastic matrix composites bonded by adhesives using variable frequency microwaves (VFM) irradiation. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 217 (1). pp. 65-75. ISSN 1464-4207

Ku, Harry S. and Lee, Kin Fung and Li, Chun Wai (2003) Thermal analysis comparison between two random glass fibre reinforced thermoplastic matrix composites bonded by adhesives using microwaves: preliminary results. Journal of Electromagnetic Waves and Applications, 17 (6). pp. 901-918. ISSN 0920-5071

Ku, Harry S. and Widjaya, Budiman and Lee, Kin Fung and Li, Chun Wai (2003) Thermal analysis of joining Nylon 66 composites using microwave irradiations. Transactions of the Canadian Society for Mechanical Engineering, 27 (3). pp. 259-278. ISSN 0315-8977

Ku, H. S. and Siu, F. and Siores, E. and Ball, J. A. R. (2002) Applications of fixed and variable frequency microwave (VFM) facilities in polymeric materials processing and joining. In: 2nd World Engineering Congress (WEC 2002), 22-25 Jul 2002, Kuching, Malaysia.

Ku, H. S. and Siu, F. and Mok, P. L. and Siores, E. and Ball, J. A. R. (2002) Characterisation of chip-on-board (COB) encapsulate epoxies used in the printed circuit board assembly (PCBA) industry using variable frequency microwave (VFM) facilities. In: 2nd World Engineering Congress (WEC 2002), 22-25 Jul 2002, Sarawak, Malaysia.

Ku, Harry S. and Van Erp, Gerard and Ball, James A. R. and Ayers, Stephen R. and Siu, Fred (2002) Shrinkage reduction of thermoset fibre composites during hardening using microwaves irradiation for curing. In: 2nd World Engineering Congress, 22-25 Jul 2002, Kuching, Malaysia.

Ku, Harry S. and Siores, Elias and Taube, Alex and Ball, James A. R. (2002) Productivity improvements through the use of industrial microwave technologies. Computers and Industrial Engineering, 42 (2-4). pp. 281-290. ISSN 0360-8352

Ku, Harry S. and Li, Chun Wai and Lee, Kin Fung (2002) Heat distribution and thermal analysis of joining thermoplastic composites using microwave energy. Institution of Engineers, Malaysia. Journal, 64 (2). pp. 6-12. ISSN 0126-513X

Ku, Harry S. and Siores, Elias and Ball, James A. R. and Taube, Alex (2002) Joining of thirty three percent by weight random glass fibre reinforced polystyrene using variable frequency microwave. Institution of Engineers, Malaysia. Journal, 63 (2). pp. 18-24. ISSN 0126-513X

Ku, Harry S. and Siores, Elias and Ball, James A. R. (2002) Lap shear strength comparison between two types of random carbon fibre reinforced thermoplastic matrix composites bonded using variable frequency microwaves (VFM) irradiation. Journal of Materials Synthesis and Processing, 9 (6). pp. 353-361. ISSN 1064-7562

Kilpatrick, J. M. and MacPherson, W. N. and Barton, J. S. and Jones, J. D. C. and Buttsworth, D. R. and Jones, T. V. and Chana, K. S. and Anderson, S. J. (2002) Measurement of unsteady gas temperature with optical fibre Fabry-Perot microsensors. Measurement Science and Technology, 13 (5). pp. 706-712. ISSN 0957-0233

Ku, Harry S. and Siores, Elias and Ball, James A. R. (2002) Microwave energy effects on polymer-matrix and fibre reinforcement of composites during bonding process by microwaves. Institution of Engineers, Malaysia. Journal, 63 (4). pp. 20-27. ISSN 0126-513X

Ku, Harry S. (2002) Risks involved in curing vinyl ester resins using microwaves irradiation. Journal of Materials Synthesis and Processing, 10 (2). pp. 97-106. ISSN 1064-7562

Ku, Harry S. and Siores, Elias and Ball, James A. R. (2001) Review - microwave processing of materials: part I. Transactions, Hong Kong Institution of Engineers, 8 (3). pp. 31-37. ISSN 1023-697X

Ku, Harry S. and Siores, Elias and Ball, James A. R. (2001) Review - microwave processing of materials: part II. Transactions, Hong Kong Institution of Engineers, 8 (3). pp. 38-43. ISSN 1023-697X

Ku, Harry S. and Siores, Elias and Ball, James A. R. (2001) Review - microwave processing of materials: part III. Transactions, Hong Kong Institution of Engineers, 8 (3). pp. 44-50. ISSN 1023-697X

Ku, H. S. and Siu, F. and Siores, E. and Ball, J. A. R. and Blicblau, A. S. (2001) Applications of fixed and variable frequency microwave (VFM) facilities in polymeric materials processing and joining. In: 5th Asia Pacific Conference on Materials Processing, 25 Jun 2001, Seoul, Korea.

Ku, Harry S. and Horsfield, Brendan and Ball, James A. R. and Siores, Elias (2001) Permittivity measurement of thermoplastic composites at elevated temperature. Journal of Microwave Power and Electromagnetic Energy, 36 (2). pp. 101-111. ISSN 0832-7823

Ku, Harry S. and Siores, Elias and Ball, James A. R. and Chan, Peter (2001) Processing of polymer matrix composites using variable frequency microwave (VFM). In: 13th International Conference on Composite Materials (ICCM-13) , 25-29 June 2001, Beijing, China.

Ku, H. S. and Ball, J. A. R. and Siores, E. (2000) Relationship between microwave irradiation and constituents of composites during joining process. Transactions Hong Kong Institution of Engineers , 7 (3). pp. 43-49. ISSN 1023-697X

Ku, Harry S. and MacRobert, Martin and Siores, Elias and Ball, James A. R. (2000) Characterisation of thermoplastic matrix composites (TPC) using variable frequency micorwave (VFM). Plastics, Rubber and Composites, 29 (6). pp. 285-287. ISSN 1465-8011

Ku, Harry S. and MacRobert, Martin and Siores, Elias and Ball, James A. R. (2000) Variable frequency microwave processing of thermoplastic composites. Plastics, Rubber and Composites, 29 (6). pp. 278-284. ISSN 1465-8011

Kanesen, Nantha K. and Billingsley, John (2000) A roller skating robot. In: Mechatronics and machine vision. Robotics and Mechatronics (3). Research Studies Press, Baldock, United Kingdom, pp. 283-292. ISBN 0--86380-261-3

Ku, Harry S. and Siu, Fred and Siores, Elias and Ball, James A. R. and Blicblau, A. S. (2000) Variable frequency microwave (VFM) processing facilities and application in processing thermoplastic matrix composites. In: IMCC'2000: 9th International Manufacturing Conference in China: Innovation and Technology for the New Millennium, 16-17 Aug 2000, Hong Kong.

Ku, Harry S. and Ball, James A. R. and Siores, Elias and Horsfield, Brendan (1999) Microwave processing and permittivity measurement of thermoplastic composites at elevated temperature. Journal of Materials Processing Technology, 89-90. pp. 419-424. ISSN 0924-0136

Ku, Harry S. and Ball, James A. R. and Siores, Elias and Chan, Peter (1999) Complex permittivity of low loss thermoplastic composites using a resonant cavity method. In: 12th International Conference on Composite Materials (ICCM-12), 5-9 July 1999, Paris, France.

Ku, Harry S. and Ball, James A. R. and Siores, Elias and Chan, Peter (1999) Loss tangent for low loss thermoplastic composites. Science and Engineering of Composite Materials, 8 (3). pp. 123-128. ISSN 0792-1233

Ku, Harry S. and Siores, Elias and Ball, James A. R. (1999) Microwave facilities for welding thermoplastic composites and preliminary results. Journal of Microwave Power and Electromagnetic Energy, 34 (4). pp. 195-205. ISSN 0832-7823

Ku, Harry S. and Siores, Elias and Ball, James A. R. and Horsfield, Brendan (1998) An important step in microwave processing of materials: permittivity measurements of thermoplastic composites at elevated temperatures. In: 1998 Pacific Conference on Manufacturing, 18-21 August 1998, Brisbane, Australia.

Ku, Harry S. and Siores, Elias and Ball, James A. R. (1997) Weldability and heat affected zone (HAZ) evaluation for high energy rate joining of thermoplastic composites using microwaves. In: 11th International Conference on Composite Materials (ICCM-11), 14-18 July 1997, Gold Coast, Australia.

L

Li, Qiang and Wang, Hao and Zhang, Zuhua and Reid, Andrew (2013) Numerical simulation of porosity on thermal properties and fire resistance of foamed concrete. Journal of Sustainable Cement-Based Materials, 2 (1). pp. 13-19. ISSN 2165-0373

Li, Qiang and Wang, Hao and Bullen, Frank and Reid, Andrew (2012) Numerical simulation of porous structure in foam concrete on thermal insulation property. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Lau, Alan K. T. (2012) Natural composites for bettering the environment [Keynote]. In: BIT's 1st Annual World Congress of Advanced Materials (WCAM 2012):Innovation, Cutting-Edge, and Smartness , 6-8 Jun 2012, Beijing, China.

Lykawka, Patryk Sofia and Horner, Jonathan and Mukai, Tadashi and Nakamura, Akiko M. (2012) The dynamical evolution of dwarf planet (136108) Haumea's collisional family: general properties and implications for the trans-Neptunian belt. Monthly Notices of the Royal Astronomical Society, 421 (2). pp. 1331-1350. ISSN 0035-8711

Lostroh, Tristan (2012) Investigation into the strength of Lego Technic liftarms and brick beams, and of liftarm pin connections. Project Report. Unpublished , Toowoomba. [Report]

Lau, Mei-ling and Lau, Kin-tak and Ku, Harry and Bahattacharyya, Debes and Lee, Joong-Hee (2012) Assessing heat-treatment effects on bovine cortical bones by nanoindentation. Processing and Fabrication of Advanced Materials. pp. 110-113. ISSN 1022-6680

Lau, Mei-Ling and Lau, Kin-Tak and Ku, Harry and Bahattacharyya, Debes and Yao, Yan-Dong (2012) Measurements of heat treatment effects on bovine cortical bones by nanoindentation and compression testing. Journal of Biomaterials and Nanobiotechnology, 3 (1). pp. 105-113. ISSN 2158-7027

Lau, Alan K. T. and Ho, Mabel M. P. (2011) Recent research trend in natural-fibre composites. JEC Composites (67). pp. 50-52. ISSN 1639-965X

Le-Cao, Khoa (2011) Radial-basis-function calculations of heat and viscous flows in multiply-connected domains. [Thesis (PhD/Research)]

Low, Tobias and Manzanera, Antoine (2010) Ground-plane classification for robot navigation: combining multiple cues toward a visual-based learning system. In: 11th International Conference on Control, Automation, Robotics and Vision (ICARCV 2010) , 7-10 Dec 2010, Singapore.

Le-Cao, K. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2010) A new integrated-RBF-based domain-embedding scheme for solving fluid-flow problems. In: 9th World Congress on Computational Mechanics and 4th Asian-Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), 19-23 Jul 2010, Sydney, Australia.

Li, Qiang and Yu, Baoyi and Zhang, Huawen and Li, Runxia and Wang, Feng and Xie, Shuisheng and Huang, Guojie and Wang, Hao (2010) Cellular automaton modeling of semisolid microstructure formation. China Foundry, 7 (2). pp. 143-148. ISSN 1672-6421

Le, Phong B. H. and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2010) A cartesian-grid collocation technique with integrated radial basis functions for mixed boundary value problems. International Journal for Numerical Methods in Engineering, 82 (4). pp. 435-463. ISSN 0029-5981

Lau, Kin-Tak and Epaarachchi, Jayantha and Sudarshan, T. S. (2010) Sensors, actuators, and intelligent processing [Preface]. Materials and Manufacturing Processes, 25 (4). p. 211. ISSN 1042-6914

Lau, Kin-tak and Ho, Mei-po and Au-Yeung, Chi-ting and Cheung, Hoi-yan (2010) Biocomposites: their multifunctionality. International Journal of Smart and Nano Materials, 1 (1). pp. 13-27. ISSN 1947-5411

Le, Phong (2010) RBF-based meshless modeling of strain localization and fracture. [Thesis (PhD/Research)]

Le, Phong B. H. and Rabczuk, Timon and Mai-Duy, Nam and Tran-Cong, Thanh (2010) A moving IRBFN-based Galerkin meshless method. CMES: Computer Modeling in Engineering and Sciences, 66 (1). pp. 25-52. ISSN 1526-1492

Le, Phong B. H. and Rabczuk, Timon and Mai-Duy, Nam and Tran-Cong, Thanh (2010) A moving IRBFN-based integration-free meshless method. CMES: Computer Modeling in Engineering and Sciences, 61 (1). pp. 63-109. ISSN 1526-1492

Le-Cao, K. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2010) Towards an analysis of shear suspension flows using radial basis functions. CMES: Computer Modeling in Engineering and Sciences, 67 (3). pp. 265-294. ISSN 1526-1492

Lykawka, P. S. and Horner, J. and Jones, B. W. and Mukai, T. (2009) Origin and dynamical evolution of Neptune Trojans: I. formation and planetary migration. Monthly Notices of the Royal Astronomical Society, 398 (4). pp. 1715-1729. ISSN 0035-8711

Le-Cao, K. and Mai-Duy, N. and Tran-Cong, T. (2009) An effective integrated-RBFN Cartesian-grid discretization for the stream function-vorticity-temperature formulation in nonrectangular domains. Numerical Heat Transfer Part B: Fundamentals, 55 (6). pp. 480-502. ISSN 1040-7790

Lam, Chun-Ki and Lau, Kin-Tak (2009) Optimization effect of micro hardness by nanoclay clusters in nanoclay/epoxy composites. Journal of Thermoplastic Composite Materials, 22 (2). pp. 213-225. ISSN 0892-7057

Leonard, L. W. H. and Wong, K. J. and Low, K. O. and Yousif, B. F. (2009) Fracture behaviour of glass fibre-reinforced polyester composite. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 223 (2). pp. 83-89. ISSN 1464-4207

Lear, Foster Robert (2008) Hoist system for small boat stacker. [USQ Project]

Lamari, Alfio Concetto (2008) Rolling stock bearing condition monitoring systems. [USQ Project]

Le, P. and Mai-Duy, N. and Tran-Cong, T. and Baker, G. (2008) An IRBFN cartesian grid method based on displacement-stress formulation for 2D elasticity problems. In: 8th World Congress on Computational Mechanics (WCCM8), 30 Jun-4 Jul 2008, Venice, Italy.

Le, P. and Mai-Duy, N. and Tran-Cong, T. and Baker, G. (2008) A meshless modeling of dynamic strain localization in quasi-brittle materials using radial basis function networks. CMES: Computer Modeling in Engineering and Sciences, 25 (1). pp. 43-67. ISSN 1526-1492

Lefhoko, Mmitsi (2007) Power station operations Millmerran power station feed water dissolved oxygen control. [USQ Project]

Lee, Wai Hung (2007) Shrinkage reduction of thermoset matrix particulate reinforced composites during hardening using low power microwave. [USQ Project]

Le, Phong and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2007) A meshless IRBFN-based numerical simulation of dynamic strain localization in quasi-brittle materials. In: USNCCM9: 9th US National Congress on Computational Mechanics , 22-26 Jul 2007, San Francisco, CA, United States.

Le, Phong and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2007) A numerical study of strain localization in elasto-thermo-viscoplastic materials using radial basis function networks. Computers, Materials and Continua, 5 (2). pp. 129-150. ISSN 1546-2218

Le-Cao, Khoa and Mai-Duy, Nam and Tran-Cong, Thanh (2007) Radial-basis-function calculations of buoyancy-driven flow in concentric and eccentric annuli. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Leong, Suet-Leong (2006) Managing product development process for time market. [USQ Project]

Ler, Eng Loo (2006) Intelligent building automation system. [USQ Project]

Lee, Kuang Sheng (2006) Experimental study of the mechanical properties of particulate reinforced composite. [USQ Project]

Le, Phong and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2006) A meshless IRBFN-based numerical simulation of adiabatic shear band formation in one dimension. In: 2006 International Conference on Nonlinear Analysis & Engineering Mechanics Today, 11-14 Dec 2006, Ho Chi Minh City, Vietnam.

Liu, Hong-Yuan and Yan, Wenyi and Mai, Yiu-Wing (2006) Z-pin bridging in composite laminates and some related problems. Australian Journal of Mechanical Engineering, 3 (1). pp. 11-19.

Luckemeyer, Nils (2005) Assisted standing and walking mode for Robug IV eight legged robot. [USQ Project]

Lim, Doou Gie (2005) Design and development of a conveyor system for semiconductor industry. [USQ Project]

Lim, Chun Hao (2005) Replacement of chiller system of a terminal building. [USQ Project]

Lee, Ven Han (2004) Co-firing of rice husk for electricity generation in Malaysia. [USQ Project]

Little, Jeremy (2004) Development of the drivetrain including brakes and wheels for the Formula SAE-A vehicle. [USQ Project]

Lee, Andrew (2004) Numerical investigation of the temperature distribution in an industrial oven. [USQ Project]

Lim, Pei Li (2004) The effect of compression ratio on the CNG-diesel engine. [USQ Project]

Layanto, Jeffrey and Cubero, Sam and Goode, Matthew (2003) Autonomous racing car competition for mechatronics engineering education. In: 10th Annual Conference on Mechatronics and Machine Vision in Practice, 9-11 Dec 2003 , Perth, Western Australia.

M

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2013) Mechanical properties characterization of the skin and core of a novel composite sandwich structure. Journal of Composite Materials, 47 (14). pp. 1785-1800. ISSN 0021-9983

Mehoub, Gabrel (2013) Adhesive wear and frictional behaviour of glass fibre reinforced thermoset composites. [USQ Project]

Mossad, Ruth and AL-Khaffajy, Marwaan (2013) Investigating two configurations of a heat exchanger in an indirect heating integrated collector storage solar water heating system. Journal of Energy and Power Engineering, 7 (1). pp. 66-73. ISSN 1934-8975

Mai-Cao, L. and Tran-Cong, T. (2012) A new IRBFN scheme for the numerical simulation of interfacial flows. In: 4th International Conference on Computational Methods (ICCM 2012), 25-28 Nov 2012, Gold Coast, Australia.

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru (2012) Cure kinetic study of epoxidized hemp oil cured with a multiple catalytic system. Journal of Applied Polymer Science, 125 (S2). E511-E517. ISSN 0021-8995

Meor Said, Mior Azman (2012) In-cylinder radiation heat transfer in a small direct injection diesel engine. [Thesis (PhD/Research)]

Mo, Chun-li and Li, Qiang and Guo, Xu-ming and Wang, Hao (2012) Numerical simulation the temperature field of the multi-coil batch during annealing process in Bell-type furnace. In: 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012), 6 Jul 2012, Zhuhai, China.

Mossad, R. and AL-Khaffajy, M. (2012) Investigating two configurations of a heat exchanger in an Indirect Heating Integrated Collector Storage Solar Water Heating System (IHICSSWHS). Renewable Energy and Power Quality Journal (10). pp. 1-6. ISSN 2172-038X

Mai-Duy, N. and Tran-Cong, T. (2011) A high-order upwind control-volume method based on integrated RBFs for fluid-flow problems. International Journal for Numerical Methods in Fluids, 67 (12). pp. 1973-1992. ISSN 0271-2091

Mandava, Jagan (2011) Mechanical behaviour of polymeric composition based on available natural fibres in Australia. [USQ Project]

Mossad, Ruth (2011) Energy usage reduction in supermarket refrigerated food cabinets. In: Encyclopedia of energy engineering and technology. Taylor & Francis, London, United Kingdom, pp. 1-7. ISBN 0-8493-3896-4

Motswagae, Tshepo (2011) A laboratory experiment based on the ‘Segway’. [USQ Project]

Mossad, Ruth (2011) Cooling towers. In: Encyclopedia of energy engineering and technology. Taylor & Francis Books, London, United Kingdom, pp. 246-254. ISBN 978-0-8493-3653-9

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru and Cooney, Tyson (2011) Cure kinetics of an epoxidized hemp oil based bioresin system. Journal of Applied Polymer Science, 122 (1). pp. 444-451. ISSN 0021-8995

Malvern, J. L. and Epaarachchi, J. A. and Lau, K. T. (2011) Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions. In: 18th International Conference on Composite Materials (ICCM-18), 21-26 Aug 2011, Jeju Island, South Korea.

Manthey, N. W. and Cardona, F. and Aravinthan, T. (2011) Mechanical properties of epoxidized hemp oil based biocomposites: preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27 -29 Apr 2011, Brisbane, Australia.

Mai-Duy, N. and Tran-Cong, T. and Phan-Thien, N. (2011) A numerical technique based on integrated RBFs for the system evolution in molecular dynamics. CMES: Computer Modeling in Engineering and Sciences, 79 (4). pp. 223-236. ISSN 1526-1492

Mai-Duy, N. and Tran-Cong, T. (2011) A stable and accurate control-volume technique based on integrated radial basis function networks for fluid-flow problems. In: ACAM 6: 6th Australasian Congress on Applied Mechanics , 12-15 Dec 2010, Perth, Western Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2011) Compact local approximations employed with integrated RBFs for second-order elliptic differential equations. In: 3rd International Symposium on Computational Mechanics (ISCM III) and 2nd Symposium on Computational Structural Engineering (CSE II), 5-7 Dec 2011, Taipei, Taiwan.

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2011) Natural fibre composites with QLD based fibres and vegetable oils. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Mossad, R. R. (2011) Numerical predictions of air temperature and velocity distribution to assist in the design of natural ventilation piggery buildings. Australian Journal of Multi-Disciplinary Engineering, 8 (2). pp. 181-187. ISSN 1448-8388

Malpress, Ray and Buttsworth, David (2010) Assessment of an eccentric link in the connecting rod of a spark ignition engine intended for variable compression ratio operation. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Western Australia.

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2010) Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review. In: Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Malpress, Ray and Buttsworth, David (2010) Internal combustion engines: a role to fill for transport in an energy conscious environment. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2010) A numerical study of 2D integrated RBFNs incorporating Cartesian grids for solving 2D elliptic differential problems. Numerical Methods for Partial Differential Equations, 26 (6). pp. 1443-1462. ISSN 0749-159X

Muller, Zach Anthony (2010) Investigation of solar thermal energy alternatives and their applications to water heating and air cooling in the meat processing industry. [USQ Project]

Mustapha, Umar (2010) The role of product design, manufacturing systems and environmental uncertainty in the Nigerian manufacturing organizations. [Thesis (PhD/Research)]

Mai-Duy, N. and Tran-Cong, T. (2010) An upwind control-volume method based on integrated RBFs for fluid-flow problems. In: 9th World Congress on Computational Mechanics and 4th Asian-Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), 19-23 Jul 2010, Sydney, Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2010) Point-wise integrated-RBF-based discretisation of differential equations. In: 2nd International Symposium on Computational Mechanics (ISCM II) in conjunction with EPMESC 2009, 30 Nov-3 Dec 2009, Hong Kong, Macau.

Mai-Duy, Nam and Tran-Cong, Thanh (2010) A control volume technique based on integrated RBFNs for the convection-diffusion equation. Numerical Methods for Partial Differential Equations, 26 (2). 426 -447. ISSN 0749-159X

McCarthy, Alison and Hancock, Nigel and Raine, Steven R. (2010) VARIwise: a general-purpose adaptive control simulation framework for spatially and temporally varied irrigation at sub-field scale. Computers and Electronics in Agriculture, 70 (1). pp. 117-128. ISSN 0168-1699

Mai-Duy, N. and Tran-Cong, T. (2010) A numerical scheme based on local integrated RBFNs and Cartesian grids for solving second-order elliptic problems in two dimensions. In: Recent studies in meshless and other novel computational methods. Tech Science Press, Duluth, GA. United States, pp. 17-33. ISBN 978-0-9824205-4-6

Mai-Duy, Nam and Tran-Cong, Thanh (2010) A simple and effective preconditioner for integrated-RBF-based Cartesian-grid schemes. In: 2010 International Conference on Computational and Experimental Engineering & Sciences 2010, 28 Mar - 1 Apr 2010, Las Vegas, USA.

Mossad, Ruth and Aral, Hal (2010) Numerical modeling of flow in a horizontal sand filter. American Journal of Engineering and Applied Sciences, 3 (2). pp. 286-292. ISSN 1941-7020

Malpress, R. and Buttsworth, D. R. (2009) Air motor for improved engine brake efficiency: design and preliminary experiments. In: 3rd International Conference on Energy and Environment (ICEE 2009): Advancement Towards Global Sustainability, 7-8 Dec 2009, Malacca, Malaysia.

Mossad, Ruth and Vella, Anthony and Balusu, Rao (2009) Inertisation of highwall mining to control methane concentrations at the Moura mine. In: 7th International Conference on Computational Fluid Dynamics in the Minerals and Process Industries (CFD 2009), 9-11 Dec 2009, Melbourne, Australia.

Mead, Stuart (2009) Numerical modelling of horizontal flow in sand filters. [USQ Project]

Mai-Duy, Nam and Ho-Minh, D. and Tran-Cong, Thanh (2009) A Galerkin approach incorporating integrated radial basis function networks for the solution of 2D biharmonic equations. International Journal of Computer Mathematics, 86 (10-11). pp. 1746-1759. ISSN 0020-7160

Milne, G. (2009) Airframe development and flight testing for entry into the 2009 Outback Challenge. [USQ Project]

Manthey, Nathan William (2009) Environmentally friendly natural fibre composites with Qld. based vegetable oils. [USQ Project]

Mai-Duy, Nam and Tran-Cong, Thanh (2009) Integrated radial-basis-function networks for computing Newtonian and non-Newtonian fluid flows. Computers and Structures, 87 (11-12). pp. 642-650. ISSN 0045-7949

Mai-Duy, Nam and Tran-Cong, Thanh (2009) An integrated-RBF technique based on Galerkin formulation for elliptic differential equations. Engineering Analysis with Boundary Elements, 33 (2). pp. 191-199. ISSN 0955-7997

Mai-Duy, Nam and See, Howard and Tran-Cong, Thanh (2009) A spectral collocation technique based on integrated Chebyshev polynomials for biharmonic problems in irregular domains. Applied Mathematical Modelling, 33 (1). pp. 284-299. ISSN 0307-904X

McIntyre, Timothy J. and Eichmann, Troy N. and Mallon, Michael and Potter, Daniel and Brandis, Aaron and Jacobs, Carolyn and Morgan, Richard and Jacobs, Peter and Buttsworth, David R. (2009) The generation and measurement of high temperature radiating flows in a high enthalpy pulsed facility. In: 3rd International Workshop on Radiation of High Temperature Gases in Atmospheric Entry, 30 Sep - 3 Oct 2008, Heraklion, Greece.

Mai-Duy, Nam and Tran-Cong, Thanh (2009) A Cartesian-grid discretisation scheme based on local integrated RBFNs for two-dimensional elliptic problems. CMES: Computer Modeling in Engineering and Sciences, 51 (3). pp. 213-238. ISSN 1526-1492

Malpress, Ray and Buttsworth, David R. (2009) A comparison between two-position variable compression ratio and continuously variable compression ratio engines using numerical simulation. In: ASME Internal Combustion Engine Division Fall Technical Conference (ICEF 2009), 27-30 Sep 2009, Lucerne, Switzerland.

McCarthy, Alison and Hancock, Nigel and Raine, Steven R. (2009) Exploration of data requirements for adaptive control of irrigation scheduling. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Mossad, Ruth and Yang, William and Schwarz, M. Philip (2009) Numerical prediction of air flow in a sharp 90 degree elbow. In: 7th International Conference on Computational Fluid Dynamics in the Minerals and Process Industries (CFD 2009), 9-11 Dec 2009, Melbourne, Australia.

Mossad, R. R. (2009) Numerical predictions of air temperature and velocity to assist in the design of free ventilation piggeries. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2009) On the use of integrated radial basis function schemes in weighted residuals statements for elliptic problems. In: 31st International Conference on Boundary Elements and Other Mesh Reduction Methods (BEM/MRM 31), 2-4 Sep 2009, New Forest, UK.

Mossad, Ruth (2009) Optimization of the ventilation system for a forced ventilation piggery. Journal of Green Building, 4 (4). pp. 113-133. ISSN 1552-6100

Maruping, Pako (2009) The design and construction of a large scale-force feedback joystick for the use in physiotherapy. [USQ Project]

Mai-Duy, Nam and Tran-Cong, Thanh (2008) A second-order continuity domain-decomposition technique based on integrated Chebyshev polynomials for two-dimensional elliptic problems. Applied Mathematical Modelling, 32 (12). pp. 2851-2862. ISSN 0307-904X

Mai-Duy, Nam and See, Howard and Tran-Cong, Thanh (2008) An integral-collocation-based fictitious-domain technique for solving elliptic problems. Communications in Numerical Methods in Engineering, 24 (11). pp. 1291-1314. ISSN 1069-8299

Mai-Duy, Nam and Tran-Cong, Thanh (2008) An efficient domain-decomposition pseudo-spectral method for solving elliptic differential equations. Communications in Numerical Methods in Engineering, 24 (10). pp. 795-806. ISSN 1069-8299

Mai-Duy, Nam and Tran-Cong, Thanh (2008) A multidomain integrated-radial-basis-function collocation method for elliptic problems. Numerical Methods for Partial Differential Equations, 24 (5). pp. 1301-1320. ISSN 0749-159X

Mai-Duy, Nam and Le-Cao, Khoa and Tran-Cong, Thanh (2008) A Cartesian grid technique based on one-dimensional integrated radial basis function networks for natural convection in concentric annuli. International Journal for Numerical Methods in Fluids, 57 (12). pp. 1709-1730. ISSN 0271-2091

Mai-Duy, N. and Tran-Cong, T. (2008) A point-collocation method based on integrated Chebyshev polynomials for elliptic differential equations in irregular domains. In: 8th World Congress on Computational Mechanics (WCCM8), 30 Jun-4 Jul 2008, Venice, Italy.

Munoz, J.-C. and Ku, H. and Cardona, F. and Rogers, D. (2008) Effects of catalysts and post-curing conditions in the polymer network of epoxy and phenolic resins: preliminary results. Journal of Materials Processing Technology, 202 (1-3). pp. 486-492. ISSN 0924-0136

Mai-Duy, N. and Tran-Cong, T. (2008) Solving 2D biharmonic equations by the Galerkin approach using integrated radial basis function networks. In: 8th International Conference on Computational and Mathematical Methods in Science and Engineering (CMMSE-2008), 13-16 Jun 2008, Murcia, Spain.

Mousis, O. and Alibert, Y. and Hestroffer, D. and Marboeuf, U. and Dumas, C. and Carry, B. and Horner, J. and Selsis, F. (2008) Origin of volatiles in the main belt. Monthly Notices of the Royal Astronomical Society , 383 (3). pp. 1269-1280. ISSN 0035-8711

Mai-Cao, L. and Tran-Cong, T. (2008) A meshless approach to capturing moving interfaces in passive transport problems. CMES: Computer Modeling in Engineering and Sciences, 31 (3). pp. 157-188. ISSN 1526-1492

Mai-Duy, N. and Tran-Cong, T. (2008) A meshless technique based on integrated radial basis function networks for elliptic partial differential equations. In: 4th International Workshop on Meshfree Methods for Partial Differential Equations, 17-20 Sep 2007, Bonn, Germany.

Mai-Duy, Nam and Tran-Cong, Thanh (2008) A multidomain integrated RBF collocation method for elliptic differential equations. In: 8th World Congress on Computational Mechanics (WCCM8), and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), 30 June - 4 July 2008, Venice, Italy.

Mai-Duy, N. and Tran-Cong, T. (2008) An effective high-order point-collocation numerical approach based on integrated approximants for elliptic differential equations. In: Leading-edge applied mathematical modeling research. Nova Science Publishers, Inc., New York, NY. United States, pp. 215-250. ISBN 978-1-60021-977-1

McCarthy, E. and Pather, S. (2008) Computer-based method of determining the path of a HIFU beam through tissue layers from medical images to improve cancer treatment. In: Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany, pp. 289-302. ISBN 978-354074026-1

McCarthy, Alison and Hancock, Nigel and Raine, Steven R. (2008) Development of a simulation framework for variable-rate irrigation of cotton. In: 14th Australian Cotton Conference: New Beginnings – Cotton in a Climate of Change , 12-14 Aug 2008, Broadbeach, Qld, Australia.

Morgan, R. G. and McIntyre, T. J. and Buttsworth, D. R. and Jacobs, P. A. and Potter, D. F. and Brandis, A. M. and Gollan, R. J. and Jacobs, C. M. and Capra, B. R. and McGilvray, M. and Eichmann, T. N. (2008) Impulse facilities for the simulation of hypersonic radiating flows. In: 38th AIAA Fluid Dynamics Conference and Exhibit (AIAA 2008), 23-26 Jun 2008, Seattle, WA. United States.

Mai-Duy, Nam and Tran-Cong, Thanh (2008) On the use of integrated RBFs in Galerkin approximation for elliptic problems. In: BEM/MRM 30: 30th International Conference on Boundary Elements and Other Mesh Reduction Methods, 7-9 Jul 2008, Maribor, Slovenia.

McCarthy, Cheryl and Hancock, Nigel and Raine, Steven (2008) On-the-go machine vision sensing of cotton plant geometric parameters: first results. In: Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany, pp. 305-312. ISBN 978-3-540-74026-1

Malpress, Ray and Buttsworth, David R. (2007) A new internal combustion engine configuration: opposed pistons with crank offset. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2007) Solving partial differential equations with point collocation and one-dimensional integrated interpolation schemes. In: 14th International Conference on Computational & Experimental Engineering and Sciences, 1-3 Jan 2007, Miami, Florida, USA.

Malpress, Ray (2007) A new internal combustion engine configuration - opposed piston with crank offset. [USQ Project]

Mitchell, Andrew (2007) On-line equipment condition monitoring based maintenance. [USQ Project]

Mai-Duy, Nam and Tran-Cong, Thanh (2007) A Cartesian-grid collocation method based on radial-basis-function networks for solving PDEs in irregular domains. Numerical Methods for Partial Differential Equations, 23 (5). pp. 1192-1210. ISSN 0749-159X

McLatchey, Graham and Billingsley, John (2007) Improving power to weight ratio of pneumatically powered legged robots. In: 10th International Conference on Climbing and Walking Robots and the Supporting Technologies for Mobile Machines: CLAWAR 2007, 16-18 July 2007, Singapore.

McKie, Scott (2007) Development of a portable high-wall lighting system. [USQ Project]

Mai-Duy, Nam and Tanner, Roger I. (2007) A spectral collocation method based on integrated Chebyshev polynomials for two-dimensional biharmonic boundary-value problems. Journal of Computational and Applied Mathematics, 201 (1). pp. 30-47. ISSN 0377-0427

Mai-Duy, Nam and Mai-Cao, Lan and Tran-Cong, Thanh (2007) Computation of transient viscous flows using indirect radial basis function networks. CMES: Computer Modeling in Engineering and Sciences, 18 (1). pp. 59-78. ISSN 1526-1492

Mai-Duy, N. and Tanner, R. I. (2007) A collocation method based on one-dimensional RBF interpolation scheme for solving PDEs. International Journal of Numerical Methods for Heat and Fluid Flow, 17 (2). pp. 165-186. ISSN 0961-5539

Mai-Duy, Nam and Tran-Cong, Thanh (2007) A RBF-based fictitious-domain technique for Dirichlet boundary value problems in multiply-connected domains. In: 3rd Asian-Pacific Congress on Computational Mechanics (APCOM'07) and EPMESC XI, 3-6 Dec 2007, Kyoto, Japan.

Mai-Duy, Nam and Khennane, Amar and Tran-Cong, Thanh (2007) Computation of laminated composite plates using integrated radial basis function networks. CMC: Computers, Materials and Continua, 5 (1). pp. 63-77. ISSN 1546-2218

Mai-Cao, L. and Tran-Cong, T. (2006) A meshless level-set scheme for interfacial flows. In: 2006 International Conference on Nonlinear Analysis & Engineering Mechanics Today, 11-14 Dec 2006, Ho Chi Minh City, Vietnam.

Mai-Duy, N. and Tran-Cong, T. and Tanner, R. I. (2006) A new high-order time-kernel BIEM for the Burgers equation. CMES: Computer Modeling in Engineering and Sciences, 16 (3). pp. 177-186. ISSN 1526-1492

Mokonopi, Kealeboga (2006) Balancing a two wheeled robot. [USQ Project]

Morgan, R. G. and McIntyre, T. J. and Jacobs, P. A. and Buttsworth, D. R. and Macrossan, M. N. and Gollan, R. J. and Capra, B. R. and Brandis, A. M. and Potter, D. and Eichmann, T. and Jacobs, C. M. and McGilvray, M. and van Diem, D. and Scott, M. P. (2006) Impulse facility simulation of hypervelocity radiating flows. In: 2nd International Workshop on Radiation of High Temperature Gases in Atmospheric Entry, 6-8 Sep 2006, Rome, Italy.

McCarthy, Alison (2006) Telemetry and communication systems for irrigation management. [USQ Project]

Mai-Duy, N. and Tran-Cong, T. and Tanner, R. I. (2006) A domain-type boundary-integral-equation method for two-dimensional biharmonic Dirichlet problem. Engineering Analysis with Boundary Elements, 30 (10). pp. 809-817. ISSN 0955-7997

Mohammed, H. and Yusaf, T. and Salman, Y. (2006) Experimental investigation of free convection heat transfer with entrance restriction placed at top of a vertical circular tube. In: 8th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA 2006), 4-7 Jul 2006, Torino, Italy.

Mohammed, H. and Yusaf, T. (2006) Heat transfer by mixed convection opposing laminar flow from the inside surface of uniformly heated inclined circular tube. In: 8th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA 2006), 4-7 Jul 2006, Torino, Italy.

Mai-Duy, Nam (2006) An effective spectral collocation method for the direct solution of high-order ODEs. Communications in Numerical Methods in Engineering, 22 (6). pp. 627-642. ISSN 1069-8299

Mai-Duy, N. and Tran-Cong, T. (2006) Solving biharmonic problems with scattered-point discretization using indirect radial-basis-function networks. Engineering Analysis With Boundary Elements, 30 (2). pp. 77-87. ISSN 0955-7997

Massaro, Aaron (2006) The effect of water ratio on the mechanical properties of refactory materials. [USQ Project]

Mai-Duy, Nam and Tran-Cong, Thanh and Tanner, R. I. (2006) A high-order time-kernel BIEM for the Burgers equation. In: International Conference on Boundary Element Techniques VII, 4-6 September 2006, Paris, France.

Mai-Duy, N. and Mai-Cao, L. and Tran-Cong, T. (2006) A new meshless RBF-based method for unsteady fluid flow analysis. In: Advances in meshless methods. Tech Science Press, USA, pp. 241-262. ISBN 0-9717880-2-2

McLatchey, Graham and Billingsley, John (2006) Force and position control using pneumatic cylinders. In: 9th International Conference on Climbing and Walking Robots: CLAWAR 2006, 12-14 Sept 2006, Brussels, Belgium.

Mai-Duy, N. and Tanner, R. I. (2005) Computing non-Newtonian fluid flow with radial basis function networks. International Journal for Numerical Methods in Fluids, 48 (12). pp. 1309-1336. ISSN 0271-2091

Mai-Duy, N. and Tanner, R. I. (2005) Solving high-order partial differential equations with indirect radial basis function networks. International Journal for Numerical Methods in Engineering, 63 (11). pp. 1636-1654. ISSN 0029-5981

Mai-Duy, Nam and Tran-Cong, Thanh (2005) An efficient indirect RBFN-based method for numerical solution of PDEs. Numerical Methods for Partial Differential Equations, 21 (4). pp. 770-790. ISSN 0749-159X

Mai-Duy, N. and Tanner, R. I. (2005) An effective high order interpolation scheme in BIEMs for biharmonic boundary value problems. Engineering Analysis with Boundary Elements, 29 (3). pp. 210-223. ISSN 0955-7997

Mai-Duy, Nam (2005) Solving high order ordinary differential equations with radial basis function networks. International Journal for Numerical Methods in Engineering, 62 (6). pp. 824-852. ISSN 0029-5981

Mai-Cao, L. and Tran-Cong, T. (2005) A meshless IRBFN-based method for transient problems. CMES: Computer Modeling in Engineering and Sciences, 7 (2). pp. 149-171. ISSN 1526-1492

McCarthy, Elizabeth and Wen, Peng (2005) Preliminary investigation of the digital human head. In: 1st International Conference on Complex Medical Engineering (CME 2005), 15-18 May 2005, Takamatsu, Japan.

Mai-Duy, Nam and Tran-Cong, Thanh (2004) An effective RBFN-boundary integral approach for the analysis of natural convection flow. International Journal for Numerical Methods in Fluids, 46 (5). pp. 545-568. ISSN 0271-2091

Mauger, Travis William (2004) Selection of an engine and design of the fuelling system for a Formula SAE car. [USQ Project]

McCarthy, Cheryl (2004) Advance rate measurement for furrow irrigation. [USQ Project]

Mai-Duy, N. and Tran-Cong, T. (2004) Boundary integral-based domain decomposition technique for solution of Navier Stokes equations. CMES: Computer Modeling in Engineering and Sciences, 6 (1). pp. 59-75. ISSN 1526-1492

Mai-Duy, N. and Tanner, R. I. (2004) An efficient BEM for numerical solution of the biharmonic boundary value problem. In: International Conference on Computational and Experimental Engineering & Sciences (ICCES 2004): Advances in Computational & Experimental Engineering & Sciences , 26-29 Jul 2004, Madeira, Portugal.

Mai-Duy, Nam (2004) Indirect RBFN method with scattered points for numerical solution of PDEs. CMES: Computer Modeling in Engineering and Sciences, 6 (2). pp. 209-226. ISSN 1526-1492

Mai-Duy, Nam and Tanner, Roger I. (2004) Numerical analysis of corrugated tube flow using RBFNs. In: 14th International Congress on Rheology, 22-27 Aug 2004, Seoul, Korea.

McIlvenna, Paul and Mossad, Ruth (2003) Two dimensional transfer chute analysis using a continuum method. In: 3rd International Conference on Computational Fluid Dynamics in the Minerals and Process Industries (CFD 2003), 10-12 Dec 2003, Melbourne, Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2003) Approximation of function and its derivatives using radial basis function networks. Applied Mathematical Modelling, 27 (3). pp. 197-220. ISSN 0307-904X

Mai-Duy, N. and Tran-Cong, T. (2003) Indirect RBFN method with thin plate splines for numerical solution of differential equations. CMES: Computer Modeling in Engineering and Sciences, 4 (1). pp. 85-102. ISSN 1526-1492

Mai-Duy, Nam and Tran-Cong, Thanh (2003) RBF interpolation of boundary values in the BEM for heat transfer problems. International Journal of Numerical Methods for Heat and Fluid Flow, 13 (5/6). pp. 611-632. ISSN 0961-5539

Mai-Duy, Nam and Tran-Cong, Thanh (2002) Mesh-free radial basis function network methods with domain decomposition for approximation of functions and numerical solution of Poisson's equations. Engineering Analysis with Boundary Elements, 26 (2). pp. 133-156. ISSN 0955-7997

McCarthy, Stuart and Billingsley, John (2002) A sensor for the sugar cane harvester topper. Sensor Review, 22 (3). pp. 242-246. ISSN 0260-2288

Mossad, Ruth (2001) Numerical modelling of air temperature and velocity in a forced and free ventilation piggery. In: ASME International Mechanical Engineering Congress and Exposition, 11 - 16 Nov 2001, New York, USA.

Mai-Duy, Nam and Tran-Cong, Thanh (2001) Numerical solution of Navier-Stokes equations using multiquadric radial basis function networks. International Journal for Numerical Methods in Fluids, 37 (1). pp. 65-86. ISSN 0271-2091

Mai-Duy, Nam and Tran-Cong, Thanh (2001) Numerical solution of differential equations using multiquadric radial basis function networks. Neural Networks, 14 (2). pp. 185-199. ISSN 0893-6080

Maxwell, Andrew and Hancock, Nigel and Tran-Cong, Thanh (2000) Automated carbon dioxide measurement via miniaturised chemical reaction chambers under mechatronic control. In: Mechatronics and machine vision. Robotics and Mechatronics (3). Research Studies Press, Baldock, United Kingdom, pp. 135-142. ISBN 0-86380-261-3

McCarthy, Stuart G. and Harris, Harry and Billingsley, John (2000) Listening for cane loss. In: Mechatronics and machine vision. Robotics and Mechatronics (3). Research Studies Press, Baldock, United Kingdom, pp. 113-118. ISBN 0--86380-261-3

Morgan, Michael J. and Fulcher, Robert and Ku, Harry S. (1999) Innovative residential schools for engineering degree courses. Quarterly Journal of Singapore Institute of Engineering Technologists, 18 (4). pp. 53-58. ISSN 1793-5059

Mai-Duy, N. and Nguyen-Hong, P. and Tran-Cong, T. (1998) A fast convergent iterative boundary element method on PVM cluster. Engineering Analysis with Boundary Elements , 22 (4). pp. 307-316. ISSN 0955-7997

Morgan, M. J. and Fulcher, R. L. and Ku, H. S. (1998) Articulation, credit transfer and flexible delivery of engineering degree courses: Australia, Malaysia and Hong Kong. Jurutera: Institution of Engineers Malaysia Monthly Bulletin, 1998 (1). pp. 57-67. ISSN 0126-513X

Morgan, Michael J. and Fulcher, Robert and Ku, Harry S. (1996) Hong Kong Higher Diploma in Engineering and Australian Bachelor of Technology in Engineering: similarities and differences. Asia Engineer. pp. 21-22. ISSN 1029-368X

N

Noor, M. M. and Hairuddin, A. Aziz and Wandel, Andrew P. and Yusaf, T. F. (2012) Modelling of non-premixed turbulent combustion of hydrogen using conditional moment closure method. IOP Conference Series: Materials Science and Engineering, 36 (1). pp. 1-17. ISSN 1757-8981

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2012) A review of mild combustion and open furnace design consideration. International Journal of Automotive and Mechanical Engineering, 6 (1). pp. 730-754. ISSN 2229-8649

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) Numerical investigation of influence of air and fuel dilution for open furnace MILD combustion burner. In: Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) The study of air fuel ratio for open furnace MILD combustion of biogas on bluff-body burner. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) Investigation of Biogas Moderate or Intense Low Oxygen Dilution (MILD) combustion on open furnace bluff-body burner. In: USQ Combustion Meeting, 29 Aug 2012, Toowoomba, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) A preliminary study of control parameters for open furnace mild combustion using CFD. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) Mild combustion: a technical review towards open furnace combustion. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) The modelling of the effect of air fuel ratio on unburned hydrocarbons for MILD combustion. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Nirmal, Umar and Hashim, Jamil and Lau, Saijod T. W. and Yuhazri, M. Y. and Yousif, B. F. (2012) Betelnut fibres as an alternative to glass fibres to reinforce thermoset composites: a comparative study. Textile Research Journal, 82 (11). pp. 1107-1120. ISSN 0040-5175

Nirmal, Umar and Hashim, Jamil and Rilling, Dirk and Brevern, P. V. and Yousif, B. F. (2012) Tribo performance of T-BFRP composite subjected to dry/wet contact conditions. In: Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Advances in Materials Science (2). Apple Academic Press (CRC Press), Toronto, Canada, pp. 311-325. ISBN 978-1-9268-9516-1

Noor, M. M. and Hairuddin, A. Aziz and Wandel, Andrew P. and Yusaf, T. F. (2011) Implementation of conditional moment closure using the Taylor expansion and finite differences. In: 1st International Conference of Mechanical Engineering Research (ICMER 2011), 5-8 Dec 2011, Kuantan, Malaysia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2011) A hybrid EMST-modified Curl's model for turbulent combustion modelling. In: 2011 USQ Research Evening, 17 Nov 2011, Toowoomba, Australia.

Noor, M. M. and Yusaf, T. F. and Wandel, Andrew P. (2011) Study of random particle interactions for analysis of diffusion lengths in turbulent combustion modelling. In: 11th Australian Combustion Symposium (ACS 2011), 29 Nov-1 Dec 2011, Newcastle, Australia.

Noor, M. M. and Amiruddin, A. K. and Kadirgama, K. and Sharma, K. V. (2011) The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP). In: 3rd International Conference on Energy and Sustainability , 11-13 Apr 2011, Alicante, Spain.

Najafi, Gholamhassan and Ghobadian, Barat and Yusaf, Talal F. (2011) Algae as a sustainable energy source for biofuel production in Iran: a case study. Renewable and Sustainable Energy Reviews, 15 (8). pp. 3870-3876. ISSN 1364-0321

Najafi, Gholamhassan and Ghobadian, Barat and Yusaf, Talal F. (2011) Biofuel from microalgae: alternative, sustainable and renewable fuel. In: 10th International Conference on Sustainable Energy Technologies (SET 2011), 4-7 Sept 2011, Istanbul, Turkey.

Nguyen-Van, H. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2011) Buckling and vibration analysis of laminated composite plate/shell structures via a smoothed quadrilateral flat shell element with in-plane rotations. Computers and Structures, 89 (7-8). pp. 612-625. ISSN 0045-7949

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2011) Free vibration analysis of laminated composite plates based on FSDT using one-dimensional IRBFN method. Computers and Structures, 89 (1-2). pp. 1-13. ISSN 0045-7949

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2011) Moving least square - one dimensional integrated radial basis function networks for time dependent problems. In: 33rd International Conference on Boundary Elements and other Mesh Reduction Methods, 28-30 Jun 2011, New Forest, UK.

Naebe, Minoo and Wang, Jing and Xue, Yuhua and Wang, Xungai and Lin, Tong (2010) Carbon nanotube reinforced rigid-rod polyimide. Journal of Applied Polymer Science, 118 (1). pp. 359-365. ISSN 0021-8995

Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275

Nawratzki, Guy (2010) Suspension development for a short circuit racing car. [USQ Project]

Ning, Z. L. and Wang, H. and Sun, J. F. (2010) Deformation behavior of semisolid A356 alloy prepared by low temperature pouring. Materials and Manufacturing Processes, 25 (7). pp. 648-653. ISSN 1042-6914

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2010) Integrated-RBF network method for free vibration analysis of laminated composite plates. In: 9th World Congress on Computational Mechanics and 4th Asian-Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), 19-23 Jul 2010, Sydney, Australia.

Nirmal, Umar and Yousif, B. F. and Rilling, Dirk and Brevern, P. V. (2010) Effect of betelnut fibres treatment and contact conditions on adhesive wear and frictional performance of polyester composites. Wear, 268 (11-12). pp. 1354-1370. ISSN 0043-1648

Nasir, T. and Yousif, B. F. and McWilliam, S. and Salih, N. D. and Hui, L. T. (2010) An artificial neural network for prediction of the friction coefficient of multi-layer polymeric composites in three different orientations. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (2). pp. 419-429. ISSN 0954-4062

Nirmal, Umar and Jamil, Nadia and Yousif, B. F. and Rilling, Dirk and Brevern, P. V. (2010) The potential of using treated betelnut fibres as reinforcement for tribo-bio polymeric composites subjected to dry/wet contact conditions. In: ICNP 2010: Macro to Nano Scales, 24-26 Sep 2010, Kottayam, India.

Nguyen-Van, Hieu (2009) Development and application of assumed strain smoothing finite element technique for composite plate/shell structures. [Thesis (PhD/Research)]

Najafi, G. and Yusaf, T. F. and Ghobadian, B. and Najmeddin, V. R. and Yousif, B. F. (2009) Performance and exhaust emission of a SI engine fuelled with potato waste ethanol and its blends with gasoline. International Energy Journal, 10 (4). pp. 215-226. ISSN 1513-718X

Najafi, G. and Ghobadian, B. and Tavakoli, T. and Yusaf, T. (2009) Potential of bioethanol production from agricultural wastes in Iran. Renewable and Sustainable Energy Reviews, 13 (6-7). pp. 1418-1427. ISSN 1364-0321

Najafi, G. and Ghobadian, B. and Tavakoli, T. and Buttsworth, D. R. and Yusaf, T. F. and Faizollahnejad, M. (2009) Performance and exhaust emissions of a gasoline engine with ethanol blended gasoline fuels using artificial neural network. Applied Energy, 86 (5). pp. 630-639. ISSN 0306-2619

Najafi, Gholamhassan and Yusaf, Talal (2009) Experimental investigation of using methanol-diesel blended fuels in diesel engine. In: 4th International Conference on Thermal Engineering Theory and Applications, 12-14 Jan 2009, Abu Dhabi, UAE.

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2009) An improved quadrilateral flat element with drilling degrees of freedom for shell structural analysis. CMES: Computer Modeling in Engineering and Sciences, 49 (2). pp. 81-110. ISSN 1526-1492

Nguyen-Van, Hieu and Le, Thong and Mai-Duy, Nam and Tran-Cong, Thanh (2008) Nodal integration finite element techniques for analysis of piezoelectric solids. In: 2008 International Conference on Computational Solid Mechanics (CSM2008), 27-30 Nov 2008, Ho Chi Minh City, Vietnam.

Noor, M. M. and Kadirgama, K. and Devarajan, R. and Rejab, M. R. M. and Zuki, N. M. and Yusaf, Talal (2008) Development of a high pressure compressed natural gas mixer for a 1.5 litre CNG-diesel dual engine. In: National Conference on Design and Concurrent Engineering (DECON) 2008, 28-29 Oct 2008, Melaka Malaysia, Malaysia.

Nixon, Robert Jeffrey (2008) Investigation of the best percentage, by weight, of glass powder as filler in phenolic resin using three point bending test. [USQ Project]

Nguyen-Van, H. and Mai-Duy, N. and Tran-Cong, T. (2008) Free vibration analysis of laminated plate/shell structures based on FSDT with a stabilized nodal-integrated quadrilateral element. Journal of Sound and Vibration, 313 (1-2). pp. 205-223. ISSN 0022-460X

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2008) A node-based element for analysis of planar piezoelectric structures. CMES: Computer Modeling in Engineering and Sciences, 36 (1). pp. 65-95. ISSN 1526-1492

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2008) A smoothed four-node piezoelectric element for analysis of two-dimensional smart structures. CMES: Computer Modeling in Engineering and Sciences, 23 (3). pp. 209-222. ISSN 1526-1492

Nguyen-Van, H. and Mai-Duy, N. and Tran-Cong, T. (2008) Analysis of piezoelectric solids with an efficient node-based element. In: 8th World Congress on Computational Mechanics (WCCM8), 30 Jun-4 Jul 2008, Venice, Italy.

Najafi, Bahman and Pirouzpanah, Vahab and Najafi, Gholamhassan and Yusaf, Talal and Ghobadian, Barat (2007) Experimental investigation of performance and emission parameters of a small diesel engine using CNG and biodiesel. In: 13th Small Engine Technology Conference 2007, 30 Oct - 01 Nov 2007, Toki Messe, Niigata, Japan.

Ning, Zhiliang and Cao, P. and Wang, Hao and Sun, Jianfei and Liu, Diankun (2007) Effect of cooling conditions on grain size of AZ91 alloy. Journal of Materials Science and Technology, 23 (5). pp. 645-649. ISSN 1005-0302

Ning, Zhiliang and Wu, Peilian and Wang, Hao and Cao, Fuyang and Sun, Jianfei (2007) Effect of pouring temperature on thixotropic microstructure formation of AZ91. Rare Metals, 26 (S1). pp. 180-184. ISSN 1001-0521

Ng, K. C. and Yusoff, M. Z. and Yusaf, T. F. (2007) Numerical simulation of 3D transonic flow in a compressor rotor. International Journal of Modelling and Simulation, 27 (1). pp. 74-79. ISSN 0288-6203

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2007) A simple and accurate four-node quadrilateral element using stabilized nodal integration for laminated plates. CMC: Computers, Materials and Continua, 6 (3). pp. 159-176. ISSN 1546-2218

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2007) Analysis of laminated composite plate/shell structures using a stabilized nodal-integrated quadrilateral element. In: 1st International Conference on Modern Design, Construction & Maintenance of Structures, 10-11 Dec 2007, Hanoi, Vietnam.

Najafi, Gholamhassan and Ghobadian, Barat and Yusaf, Talal and Rahimi, Hadi (2007) Combustion analysis of a CI engine performance using waste cooking biodiesel fuel with an artificial neural network aid. American Journal of Applied Sciences, 4 (10). pp. 756-764. ISSN 1546-9239

Nguyen-Van, Hieu and Khennane, Amar and Tran-Cong, Thanh (2006) Monte-Carlo simulation of the durability of glass fibre reinforced composite under environmental stress corrosion. In: 2006 International Conference on Nonlinear Analysis & Engineering Mechanics Today, 11-14 Dec 2006, Ho Chi Minh City, Vietnam.

Napper, Bryce (2006) Computational fluid dynamics (CFD) investigation of the thermal efficiency of micro climate conditioning of a typical workstation. [USQ Project]

Ng, Hai Ching (2005) Investigation of tenable carbon monoxide and visibility level for a fired room. [USQ Project]

Ng, K. C. and Yusoff, M. Z. and Yusaf, T. F. (2005) Simulations of two-dimensional high speed turbulent compressible flow in a diffuser and a nozzle blade cascade. American Journal of Applied Sciences, 2 (9). pp. 1325-1330. ISSN 1546-9239

Nelder, Ken (2004) The bodywork package for the USQ's Formula-SAE racer. [USQ Project]

O

O'Shannassy, Geoffrey Mark (2009) Development of a driver training simulator for use by stroke patients. [USQ Project]

O'Neil, Anthony M. (2005) Chassis design for SAE racer. [USQ Project]

Outschoorn, Jeremy Paul (2005) Computational fluid mechanics investigation of ventilation aboard a livestock vessel. [USQ Project]

Ouyang, L. Z. and Wang, Hao and Zhu, M. and Zou, Jin and Chung, C. Y. (2004) Microstructure of MmM5/Mg multi-layer hydrogen storage films prepared by magnetron sputtering. Microscopy Research and Technique, 64 (4). pp. 323-329. ISSN 1059-910X

Ong, Clement and Billingsley, John (2003) The steering of trailed implements for tractor path tracking. In: 10th Annual Conference on Mechatronics and Machine Vision in Practice, 09-11 Dec 2003, Perth, Australia.

P

Perera, Kithsiri and Herath, Srikantha and Apan, Armando and Tateishi, Ryutaro (2013) Application of Modis data to assess the latest forest cover changes of Sri Lanka. In: 22nd Annual Photogrammetry, Remote Sensing and Spatial Information Science Congress (ISPRS 2012): Imaging a Sustainable Future, 25 Aug-1 Sep 2012, Melbourne, Australia.

Pham-Sy, N. and Hoang-Trieu, T.-T. and Tran, C.-D. and Mai-Duy, N. and Tran-Cong, T. (2012) Development of parallel algorithm for boundary value problems using compact local integrated RBFN and domain decomposition. In: 4th International Conference on Computational Methods (ICCM 2012), 25-28 Nov 2012, Gold Coast, Australia.

Peauril, Joshua (2011) Recycling glass fibre composites – process and viability. [USQ Project]

Perry, Ramon (2010) Design of a small wind turbine for a rural community in Australia. [USQ Project]

Philips, Cameron Charles MacGregor (2010) Gladstone Power Station demineralised water plant asset strategy development. [USQ Project]

Phillips, D. G. and Tran, Canh-Dung and Fraser, W. B. and van der Heijden, G. H. M. (2010) Torsional properties of staple fibre plied yarns. Journal of the Textile Institute, 101 (7). pp. 595-612. ISSN 0040-5000

Pather, Selvan and Wang, Hao (2009) The use of simulated games in an undergraduate course manufacturing processes. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Padda, Ranjit Singh (2008) Air flow through two layered mesh at varying porosity and spacing. [USQ Project]

Prasser, Nathan (2008) The development of a computer based system for the rehabilitation of arm movements of stroke patients. [USQ Project]

Parkin, Damion Ian Harcourt (2007) Design of a rear suspension configuration for a live axle race car to achieve optimum handling characteristics. [USQ Project]

Partridge, Toni Leigh (2006) Automation of a load-haul-dump (LHD) unit. [USQ Project]

Plank, Melinda (2005) Engine optimisation and performance characteristics for a formula SAE race car. [USQ Project]

Popa, Cristina Elena (2005) Steering system and suspension design for 2005 formula SAE-A car. [USQ Project]

Plaza, Floran (2002) Measuring, modelling and understanding the mechanical behaviour of bagasse. [Thesis (PhD/Research)]

Petty, Matt K. and Billingsley, John and Tran-Cong, Thanh (1997) Autonomous LHD loading. In: MViP 1997: 4th Annual Conference on Mechatronics and Machine Vision in Practice, 23-25 Sep 1997, Toowoomba, Australia.

R

Robertson, Paul and Horner, J. and Wittenmyer, Robert A. and Endl, Michael and Cochran, William D. and MacQueen, Phillip J. and Brugamyer, Erik J. and Simon, Attila E. and Barnes, Stuart I. and Caldwell, Caroline (2012) A second giant planet in 3:2 mean-motion resonance in the HD 204313 system. The Astrophysical Journal, 754 (1). pp. 1-9. ISSN 0004-637X

Robertson, Paul and Endl, Michael and Cochran, William D. and MacQueen, Phillip J. and Wittenmyer, Robert A. and Horner, J. and Brugamyer, Erik J. and Simon, Attila E. and Barnes, Stuart I. and Caldwell, Caroline (2012) The McDonald observatory planet search: new long-period giant planets and two interacting Jupiters in the HD155358 system. The Astrophysical Journal, 749 (1). pp. 1-17. ISSN 0004-637X

Rao, G. Srinivasa and Sharma, K. V. and Chary, S. P. and Bakar, R. A. and Rahman, M. M. and Kadirgama, K. and Noor, M. M. (2011) Experimental study on heat transfer coefficient and friction factor of Al2O3 nanofluid in a packed bed column. Journal of Mechanical Engineering and Sciences, 1 (1). pp. 1-15.

Rackemann, Benjamin (2011) The analysis and redesign of the spraycam sprayer to incorporate fibre composite pultrusions. [USQ Project]

Ryan, Richard (2011) Optimisation of flow through a horizontal spiral baffled filter. [USQ Project]

Randeniya, Lakshman K. and Bendavid, Avi and Martin, Philip J. and Tran, Canh-Dung (2010) Composite yarns of multi-walled carbon nanotubes with metallic electrical conductivity. Small, 6 (16). pp. 1806-1811. ISSN 1613-6810

Reinbott, Nigel (2009) A review and update of the supply chain documentation within Amcor Flexibles. [USQ Project]

Ren, Feifei and Wang, Yongwei and Li, Huang and Wang, Xiaojie and Wang, Jing (2009) Preparation and characterization of series polyimides. China Synthetic Resin and Plastics, 26 (2). pp. 19-22. ISSN 1002-1396

Rahimi, Hadi and Ghobadian, Barat and Yusaf, Talal and Najafi, Gholamhasan and Khatamifar, Mahdi (2009) Diesterol: an environment-friendly IC engine fuel. Renewable Energy, 34 (1). pp. 335-342. ISSN 0960-1481

Rong, Jian Hua and Liang, Qing Quan and Guo, Seng and Mu, Rang Ke (2008) A topological optimization method considering stress constraints. In: ICICTA 2008: International Conference on Intelligent Computation Technology and Automation, 20-22 Oct 2008, Changsha, China.

Ross, David and Ku, Harry S. (2007) Managing the delivery of 'Manufacturing Processes' in an Australian regional university known for excellence in e-learning. Delhi Institute of Advanced Studies Technology Review, 4 (1). pp. 46-54. ISSN 0972-9658

Ren, Yibin and Wang, Hao and Huang, Jingjing and Zhang, Bingchun and Yang, Ke (2007) Study of biodegradation of pure magnesium. In: ASBM7: 7th Asian Symposium on Biomedical Materials , 20-23 Aug 2006, Jeju, Korea.

Ren, Yibin and Huang, Jingjing and Yang, Ke and Zhang, Bingchun and Yao, Zhiming and Wang, Hao (2005) Study of bio-corrosion of pure magnesium. Acta Metallurgica Sinica (Jinshu Xuebao), 41 (11). pp. 1228-1232. ISSN 0412-1961

Roache, Brody (2004) Heat transfer measurements of a re-entry capsule using fast response thermocouples. [USQ Project]

Rayner, Leslie (2004) Steering design for a formula SAE-A open wheel race car. [USQ Project]

S

Shalwan, A. and Yousif, B. F. (2013) In state of art: mechanical and tribological behaviour of polymeric composites based on natural fibres. Materials and Design, 48. pp. 14-24. ISSN 0264-1275

Sharifian, Ahmad and Hashempour, Javad (2012) Dilution of toxic gases and smoke emissions from residential chimneys using a low-cost cap. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Saulov, D. N. and Zhao, M. M. and Klimenko, D. A. and Cleary, M. J. and Hooman, K. and Klimenko, A. Y. (2012) General approach for modelling of reactive transport in porous media. International Journal of Chemical Engineering and Applications, 3 (6). pp. 471-476. ISSN 2010-0221

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2012) Development of smart wind turbine blades. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Supeni, Eris Elianddy (2012) Design and analysis of a smart composite beam for small wind turbine blade construction. In: Southern Regional Engineering Conference (SREC 2012) , 1 Sep 2012, Toowoomba, Australia.

Sharifian, Ahmad (2012) The effect of direction of low speed winds on the performance of a split chimney. In: 23rd International Congress of Theoretical and Applied Mechanics (ICTAM 2012), 19-24 Aug2012, Beijing, China.

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2012) Design of smart structures for wind turbine blades. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Sharifian, Ahmad (2012) The effect of wind speed on the performance of a split chimney. In: 2012 International Conference on Fluid Dynamics and Thermodynamics Technologies (FDTT 2012), 17-18 March 2012, Singapore.

Searle, Joshua (2011) The efficient use of building mechanical services for saving energy. [USQ Project]

Singh, Narish and Yousif, B. F. and Rilling, Dirk (2011) Tribological characteristics of sustainable fibre reinforced thermoplastic composites under wet adhesive wear. Tribology Transactions, 54 (5). 736-748. ISSN 1040-2004

Singh, N. and Yousif, B. F. and Rilling, D. (2011) Adhesive wear of thermoplastic composite based on kenaf fibres. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225 (2). pp. 101-109. ISSN 1350-6501

Singh, Narish and Yousif, B. F. and Rilling, Dirk (2011) Investigations on wear and frictional properties of kenaf fibre polyurethane composites under dry and wet contact conditions. International Journal of Precision Technology, 2 (4). pp. 375-387. ISSN 1755-2060

Sharifian, Ahmad (2010) An experimental study of wind force acting on commercial double-layered square metal screens at different spacing. In: 17th Australasian Fluid Mechanics Conference (AFMC 2010), 5-9 Dec 2010, Auckland, New Zealand.

Supeni, E. E. and Yusaf, Talal and Wandel, Andrew P. and Buttsworth, David R. and Noor, M. M. (2010) Experimental and modeling investigation of the performance characteristics on diesel HCCI with hydrogen additive - a review. In: 2nd National Conference in Mechanical Engineering Research and Postgraduate Studies, 3-4 Dec 2010, Kuantan, Pahang, Malaysia.

Sharifian, Ahmad and Buttsworth, David (2010) Double-layered metal mesh screens to contain or exclude thermal radiation from bush fires. Journal of Fire Protection Engineering, 20 (4). pp. 291-311. ISSN 1042-3915

Slack–Smith, David (2010) Structural design, quotation and production support using parametric CAD tools and national/international standards for fluid storage systems. [USQ Project]

Smith, B. (2010) A biomechanical analysis for improved ergonomics in metal detector products using trajectory optimisation. [USQ Project]

Salomon, Jake (2010) The design and construction of an exercise device for use in physiotherapy of the arm. [USQ Project]

Singh, Narish and Rilling, Dirk and Yousif, B. F. (2010) Kenaf fibers for tribo-thermoplastic composites. In: ASME International Mechanical Engineering Congress and Exposition (IMECE 2009), 13-19 Nov 2009, Lake Buena Vista, FL. United States.

Said, Mior A. and Buttsworth, D. R. and Yusaf, T. F. (2009) A review of radiation heat transfer measurement for diesel engines using the two-colour method. In: 3rd International Conference on Energy and Environment (ICEE 2009): Advancement Towards Global Sustainability , 7-8 Dec 2009, Malacca, Malaysia.

Schroll, Peter and Wandel, Andrew P. and Cant, R. Stewart and Mastorakos, E. (2009) Direct numerical simulations of autoignition in turbulent two-phase flows. Proceedings of the Combustion Institute, 32 (2). pp. 2275-2282. ISSN 1540-7489

Sharifian, Ahmad and Buttsworth, David R. (2009) Direct radiation from wildfires through square woven screens. In: ASME 2008 Summer Heat Transfer Conference (HT 2008), 10-14 Aug 2008, Jacksonville, FL. United States.

Strong, Simon James (2008) Design of a small wind turbine. [USQ Project]

Sawchuk, Mike (2008) Flexural strength SLG-reinforced phenolic composites cured in microwaves. [USQ Project]

Salomon, David Scott (2008) Position control using a digital servo system. [USQ Project]

Shekhar, Shashi (2008) Tensile strength of sawdust reinforced phenolic resin composite materials. [USQ Project]

Sanathkumara, Kumarapelige N. and Cubero, Samuel N. (2007) Automated soil hardness testing machine. In: M2VIP 2007: 14th Annual Conference on Mechatronics and Machine Vision In Practice, 3-5 Dec 2007, Xiamen, China.

Sharifian, Ahmad and Buttsworth, David R. (2007) Computational simulation of the wind-force on metal meshes. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Stewart, Robert (2007) Design of electro-hydraulic controlled poppet valves. [USQ Project]

Sullivan, Steven Michael (2007) Research, design and develop a pipe latching/unlatching device that can be used to help automate the pipe tripping process. [USQ Project]

Steyn, Marius (2007) Review and redesign of Pilbara Iron 24MTA conveyor system. [USQ Project]

Sullivan, T. (2007) Embedded control system for biogas digesters. [USQ Project]

Sharifian, Ahmad and Buttsworth, David R. (2007) Minimum safe standoff distance for protection from bushfire radiation by commercial metal meshes. In: 8th Australasian Heat and Mass Transfer Conference, 26-29 Jul 2005, Curtin University of Technology, Perth, Western Australia.

Sharifian, Ahmad and Watson, Stuart and Buttsworth, David R. and Barton, James (2007) Modelling the static thermal sensitivity of diaphragm-based fibre optic pressure sensors. In: 8th Australasian Heat and Mass Transfer Conference, 26-29 July 2005, Curtin University of Technology, Perth, Western Australia.

Sharifian, S. Ahmad and Buttsworth, David R. (2007) Evaluation of glued-diaphragm fibre optic pressure sensors in a shock tube. Shock Waves, 16 (3). pp. 189-197. ISSN 0938-1287

Smith, Barton James (2006) System design for formula SAE-A racecar. [USQ Project]

Sharifian, S. A. and Buttsworth, D. R. (2005) Thermal effects on fibre optic pressure sensor during free piston compression experiments. In: 8th International Symposium on Fluid Control, Measurement and Visualization (8th FLUCOME), 22-25 Aug 2005, Chengdu, China.

Silva, Alan Grant Lance (2004) The development of a new multi-directional fall arrest device. [USQ Project]

Stansbie, Clayton Harley (2004) Natural gas burner for copper smelter converter. [USQ Project]

Sercombe, David B. (2004) Transverse injection from a hypersonic cone. [USQ Project]

Snook, Chris and Fulcher, Bob (2002) A review of teaching strategies in practical work for mechanical and mechatronic engineering students studying via on-campus and distance education. In: AaeE 2002: Leadership in Learning: Learning in Leadership, 30 Sep - 3 Oct 2002, Canberra, Australia.

Snook, Chris and Leis, John (2002) System configuration and IP networking: a team-based laboratory course. In: AaeE 2002: Leadership in Learning: Learning in Leadership, 30 Sep - 3 Oct 2002, Canberra, Australia.

Sharifian, S. A. and Buttsworth, D. R. (2002) Reducing the mechanical hysteresis problem in optically-addressed diaphragm pressure sensors. In: SPIE 2002: Vibration Measurements by Laser Techniques: Advances and Applications, 18-21 June 2002, Ancona, Italy.

Sharifian, S. A. and Buttsworth, D. R. (2001) Optically addressed pressure sensors for transient gas dynamics: calibration of a preliminary design. In: 14th Australasian Fluid Mechanics Conference (AFMC 2001) , 9-14 Dec 2001, Adelaide, South Australia.

Snook, C. P. (2000) Actuators and implementation issues [Introduction]. In: Mechatronics and machine vision. Robotics and Mechatronics (3). Research Studies Press, Baldock, United Kingdom, pp. 303-304. ISBN 0--86380-261-3

Sharifian, S. Ahmad and Buttsworth, David R. (2000) Deflection of a pretensioned circular diaphragm due to aerothermal loading. In: 4th Biennial Engineering Mathematics and Applications Conference : Mathematics and Engineering: An Innovative Partnership (EMAC 2000), 10-13 Sep 2000, Melbourne, Australia.

Stone, Nicholas and Billingsley, John (2000) Development of low cost range sensing instrumentation for collision avoidance applications. In: Mechatronics and machine vision. Robotics and Mechatronics (3). Research Studies Press, Baldock, United Kingdom, pp. 127-133. ISBN 0--86380-261-3

Schultz, Bradley J. and Billingsley, John and Adamczak, Thomas (2000) The mechatronic bakery. In: Mechatronics and machine vision. Robotics and Mechatronics (3). Research Studies Press, Baldock, United Kingdom, pp. 105-112. ISBN 0--86380-261-3

T

Tuomi, M. and Jones, H. R. A. and Jenkins, J. S. and Tinney, C. G. and Butler, R. P. and Vogt, S. S and Barnes, J. R. and Wittenmyer, R. A. and O'Toole, S. J. and Horner, J. and Bailey, J. and Carter, B. D. and Wright, D. J. and Salter, G. S. and Pinfield, D. (2013) Signals embedded in the radial velocity noise: periodic variations in the tau Ceti velocities. Astronomy and Astrophysics, 551 (A79). pp. 1-21. ISSN 0004-6361

Thota, Narasimha M. and Epaarachchi, Jayantha A. and Lau, Kin-tak (2013) Effect of the energy absorbing mechanisms on the blunt thoracic trauma caused by a typical foam projectile. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

Thota, N. M. and Epaarachchi, J. A. and Lau, K. T. (2013) Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

Thota, N. M. and Epaarachchi, J. A. and Lau, K. T. (2013) Important aspects of finite element modeling of low density thermo plastic closed cell foams. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

Tarawneh, Mou’ad A. and Ahmad, Sahrim Hj. and EhNoum, SeYong and Lau, Kin-tak (2013) Sonication effect on the mechanical properties of MWCNTs reinforced natural rubber. Journal of Composite Materials, 47 (5). pp. 579-585. ISSN 0021-9983

Thota, Narasimha Murthy and Eepaarachchi, Jayantha A. and Lau, K. T. (2012) Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study. In: 7th Australasian Congress on Applied Mechanics (ACAM 2012), 9-12 Dec 2012, Adelaide, Australia.

Thai-Quang, N. and Le-Cao, K. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2012) A high-order compact integrated-RBF scheme for time-dependent problems. In: 4th International Conference on Computational Methods (ICCM 2012), 25-28 Nov 2012, Gold Coast, Australia.

Trada, M. and Mandava, J. and Ku, H. and Yousif, B. (2012) Tensile properties of bagasse reinforced epoxy composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today , 6-8 Nov 2012 , Kuala Lumpur, Malaysia .

Thompson, Simon (2012) Numerical modelling of Big Tyres patented non-pneumatic wheel concept. [USQ Project]

Tangalajuk Siang, Jeri and Sharifian, Ahmad (2012) Reducing the amount of required propane refrigerant in the condenser of a commercial air-conditioner by increasing the inlet temperature. In: Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Tran, Canh-Dung and Mai-Duy, Nam and Tran-Cong, Thanh (2012) Computation of a Fokker-Planck-equation-based multi-scale model for complex flows using the IRBFN method. In: 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), 10-14 Sep 2012, Vienna, Austria.

Tran, C.-D. and Mai-Duy, N. and Tran-Cong, T. (2012) Numerical solution of Fokker-Planck equation using the integral radial basis function networks. In: 10th World Congress on Computational Mechanics (WCCM 2012), 8-13 Jul 2012, Sao Paulo, Brazil.

Tran, Canh-Dung and Tran-Cong, Thanh and Le-Cao, K. and Ho-Minh, D. (2012) Processing the CNTs' interaction in web using an electro-static field based process. In: 2012 International Conference on Nanoscience and Nanotechnology (ICONN 2012), 5-9 Feb 2012, Perth, Australia .

Tran, C.-D. and Mai-Duy, N. and Le-Cao, K. and Tran-Cong, T. (2012) A continuum-microscopic method based on IRBFs and control volume scheme for viscoelastic fluid flows. CMES: Computer Modeling in Engineering and Sciences, 85 (6). pp. 499-519. ISSN 1526-1492

Thai-Quang, N. and Le-Cao, K. and Mai-Duy, N. and Tran-Cong, T. (2012) A high-order compact local integrated-RBF scheme for steady-state incompressible viscous flows in the primitive variables. CMES: Computer Modeling in Engineering and Sciences, 84 (6). pp. 528-557. ISSN 1526-1492

Thai-Quang, Nha and Mai-Duy, Nam and Tran-Cong, Thanh (2012) A numerical study of integrated radial-basis-functions for the pressure-velocity formulation. In: 7th ICCES Special Symposium on Meshless & Other Novel Computational Methods (ICCES MM 2011), 6-10 Sept 2011, Zonguldak, Turkey.

Thai-Quang, N. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2012) High-order alternating direction implicit method based on compact integrated-RBF approximations for unsteady/steady convection-diffusion equations. CMES: Computer Modeling in Engineering and Sciences, 89 (3). pp. 189-220. ISSN 1526-1492

Turnbull, Jon (2011) Improving the performance of the Nanango wastewater treatment plant. [USQ Project]

Tinney, C. G. and Wittenmyer, Robert A. and Butler, R. Paul and Jones, Hugh R. A. and O'Toole, Simon J. and Bailey, Jeremy A. and Carter, Brad D. and Horner, J. (2011) The Anglo-Australian planet search. XXI. A gas-giant planet in a one year orbit and the habitability of gas-giant satellites. The Astrophysical Journal Letters, 732 (1). pp. 1-11. ISSN 2041-8205

Tran, C.-D. and Lucas, S. and Phillips, D. G. and Randeniya, L. K. and Baughman, R. H. and Tran-Cong, T. (2011) Manufacturing polymer/carbon nanotube composite using a novel direct process. Nanotechnology, 22 (14). pp. 1453021-1453029. ISSN 0957-4484

Tran, C.-D. and An-Vo, D.-A. and Mai-Duy, N. and Tran-Cong, T. (2011) An integrated RBFN-based macro-micro multi-scale method for computation of visco-elastic fluid flows. CMES: Computer Modeling in Engineering and Sciences, 82 (2). pp. 137-162. ISSN 1526-1492

Thai-Quang, N. and Le-Cao, K. and Mai-Duy, N. and Tran-Cong, T. (2011) Discretisation of the velocity-pressure formulation with integrated radial-basis-function networks. Structural Longevity, 6 (2). pp. 77-91. ISSN 1944-611X

Tran, Canh-Dung and Smith, Shaun M. and Higgerson, G. and Bui, Anh and Randeniya, Lakshman K. and Tran-Cong, Thanh (2010) Spinning CNT based composite yarns using a dry spinning process. In: 2010 International Conference on Nanoscience and Nanotechnology (ICONN 2010), 22-26 Feb 2010, Sydney, Australia.

Tran, Canh-Dung and Phillips, David G. and Fraser, W. Barrie (2010) Stationary solution of the ring-spinning balloon in zero air drag using a RBFN based mesh-free method. Journal of the Textile Institute, 101 (2). pp. 101-110. ISSN 0040-5000

Tran, Canh-Dung and Smith, Shaun M. and Higgerson, G. and Huynh, Chi and Kviz, Ladge and Maudev, George and Lucas, Stuart and Bui, Anh (2010) Spinning CNT based composite yarns using a dry spinning process. In: 2010 International Conference on Nanoscience and Nanotechnology (ICONN 2010), 22- 26 Feb 2010, Sydney, Australia.

Thorpe, David and Goh, Steven (2010) Study of SME innovation in two Queensland industries. In: Innovation in business and enterprise: technologies and frameworks. IGI Publishing (IGI Global), Hershey PA, USA, pp. 240-259. ISBN 978-1-61520-643-8

Trada, Mohan and Ku, Harry and Vedhar, Jayant (2009) Flexural strength of phenol formaldehyde composites post-cured in microwaves: preliminary results. Multi-Functional Materials and Structures II. pp. 1399-1402. ISSN 1022-6680

Tran, Canh-Dung and Humphries, William and Smith, Shaun M. and Huynh, Chi and Lucas, Stuart (2009) Improving the tensile strength of carbon nanotube spun yarns using a modified spinning process. Carbon, 47 (11). pp. 2662-2670. ISSN 0008-6223

Tran, Canh-Dung and Phillips, David G. and Tran-Cong, Thanh (2009) Computation of dilute polymer solution flows using BCF-RBFN based method and domain decomposition technique. Korea-Australia Rheology Journal, 21 (1). pp. 1-12. ISSN 1226-119X

Tran, Canh-Dung and van der Heijden, G. H. M. and Phillips, David G. (2008) Application of topological conservation to model key features of zero-torque multi-ply yarns. Journal of the Textile Institute, 99 (4). pp. 325-337. ISSN 0040-5000

Thiess, Jeremy (2007) Development of a test frame to investigate the propagation of pressure waves generated by a thunderbolt hammer. [USQ Project]

Tinning, Eugene (2006) Field deployable shower unit by dual membrane filtration. [USQ Project]

Treverrow, Daniel (2006) Comparison of injury criteria for human head impacts. [USQ Project]

Tuxford, Andrew (2006) Numerical analysis of a closed face impeller. [USQ Project]

Tran, Canh-Dung and van der Heijden, G. H. M. and Phillips, David G. (2006) Issues in processing unstable twisted fibre assemblies. In: 4th International Industrial Simulation Conference (ISC 2006), 5-7 Jun 2006, Palermo, Italy.

Teo, Chin Teng (2005) Lifting mechanism of wheelchair. [USQ Project]

Taylor, Brett C. (2004) Assessment of appropriate pressure vessel flange bolt tension by finite element modelling. [USQ Project]

Tran, Canh-Dung and Tran-Cong, Thanh (2004) Element-free simulation of dilute polymeric flows using Brownian configuration fields. Korea-Australia Rheology Journal, 16 (1). pp. 1-15. ISSN 1226-119X

Tran, Canh-D. and Tran-Cong, T. (2002) BEM-NN computation of generalised Newtonian flows. Engineering Analysis with Boundary Elements, 26 (1). pp. 15-28. ISSN 0955-7997

Tran-Cong, T. and Mai-Duy, N. and Phan-Thien, N. (2002) BEM-RBF approach for viscoelastic flow analysis. Engineering Analysis with Boundary Elements, 26 (9). pp. 757-762. ISSN 0955-7997

Tran, Canh-Dung and Tran-Cong, Thanh (2002) Computation of viscoelastic flow using neural networks and stochastic simulation. Korea-Australia Rheology Journal, 14 (4). pp. 161-174. ISSN 1226-119X

Taylor, J. A. and Wang, H. and StJohn, D. H. and Bainbridge, I. F. (2001) Anomalous grain coarsening behaviour observed in grain-refined aluminium alloy cast using low superheat. In: 130th TMS Annual MeetingLight Metals 2001, 11-15 Feb 2001, New Orleans, Louisanna.

V

Venkatesh, V. C. and Yousif, Belal F. (2009) Advances in manufacturing processes and management techniques [Editorial]. International Journal of Manufacturing Technology and Management, 17 ( 4 ). ISSN 1368-2148

Vandenbroucke, A. and Cardona, F. and Ku, H. and Rogers, D. (2009) Effects of chopped hemp on mechanical and thermal properties of epoxy resins. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Vella, Anthony (2006) Ventilation of highwall mining to control methane concentration at the Moura Mine. [USQ Project]

van Erp, Gerardus Maria (2004) Structural elements formed from castable material. .

van Erp, Gerardus Maria (2003) A method of manufacturing structural units. .

W

Wang, Yafeng and Wei, Guoxing and Xiang, Wei (2013) Inter-cell interference modeling for cellular networks. Telecommunication Systems , 53 (1). pp. 99-105. ISSN 1018-4864

Wittenmyer, Robert A. and Tinney, C. G. and Horner, J. and Butler, R. P. and Jones, H. R. A. and O'Toole, S. J. and Bailey, J. and Carter, B. D. and Salter, G. S. and Wright, D. (2013) Observing strategies for the detection of Jupiter analogs. Publications of the Astronomical Society of the Pacific, 125 (926). pp. 351-356. ISSN 0004-6280

Wandel, Andrew P. (2013) Extinction predictors in turbulent sprays. Proceedings of the Combustion Institute, 34 (1). pp. 1625-1632. ISSN 1540-7489

Wandel, Andrew P. and Lindstedt, R. Peter (2013) Hybrid multiple mapping conditioning modeling of local extinction. Proceedings of the Combustion Institute, 34 (1). pp. 1365-1372. ISSN 1540-7489

Wittenmyer, Robert A. and Horner, Jonathan and Tinney, C. G. (2012) Resonances required: dynamical analysis of the 24 sex and HD 200964 planetary systems. The Astrophysical Journal, 761 (2). pp. 1-6. ISSN 0004-637X

Wardana, I. N. G. (2012) Burning characteristics of coconut oil In micro-combustor. In: USQ Combustion Meeting, 26 Nov 2012, Toowoomba, Australia.

Wardana, I. N. G. (2012) Premixed combustion of coconut oil in a hele-shaw shell. In: USQ Combustion Meeting, 26 Nov 2012, Toowoomba, Australia.

Wittenmyer, Robert A. and Horner, J. and Tuomi, Mikko and Salter, G. S. and Tinney, C. G. and Butler, R. P. and Jones, H. R. A. and O'Toole, S. J. and Bailey, J. and Carter, B. D. and Jenkins, J. S. and Zhang, Z. and Vogt, S. S. and Rivera, Eugenio J. (2012) The Anglo-Australian planet search. XXII. Two new multi-planet systems. The Astrophysical Journal, 753 (2). pp. 1-12. ISSN 0004-637X

Widodo, Agung Sugeng (2012) Temperature variations in a free piston compression wind tunnel. [Thesis (PhD/Research)]

Wang, Jing and Sutti, Alessandra and Wang, Xungai and Lin, Tong (2012) Thermo-responsive Hercosett/Poly(N-isopropylacrylamide) films: a new, fast, optically responsive coating. Journal of Colloid and Interface Science, 369 (1). pp. 231-237. ISSN 0021-9797

Wong, Kwok Yeung Peter (2012) Measurement of mechanical, electrical and thermal properties of glass powder reinforced epoxy composites and modelling. [Thesis (PhD/Research)]

Wang, Zhao and Zhang, Xing and Wang, Runguo and Kang, Hailan and Qiao, Bo and Ma, Jun and Zhang, Liqun and Wang, Hao (2012) Synthesis and characterization of novel soybean-oil-based elastomers with favorable processability and tunable properties. Macromolecules, 45 (22). pp. 9010-9019. ISSN 0024-9297

Wandel, Andrew P. and Willey, Keith (2011) Peer review of teamwork for encouraging equal commitment to the group effort. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Wandel, Andrew P. (2011) A stochastic micromixing model based on the turbulent diffusion length scale. In: 11th Australian Combustion Symposium (ACS 2011), 29 Nov-1 Dec 2011, Newcastle, Australia.

Wandel, Andrew P. (2011) Team formation by region to improve outcomes for distance-education students in a PBL course. In: FIE 2011: Celebrating 41 Years of Monumental Innovations From Around the World , 12-15 Oct 2011, Rapid City, SD. United States.

Wittenmyer, Robert A. and Tinney, C. G. and Butler, R. P. and O'Toole, Simon J. and Jones, H. R. A. and Carter, B. D. and Bailey, J. and Horner, J. (2011) The frequency of low-mass exoplanets III: toward theta at short periods. The Astrophysical Journal, 738 (1). 81(1)-81(6). ISSN 0004-637X

Wang, Hao and Shi, Zhiming (2011) In vitro biodegradation behavior of magnesium and magnesium alloy. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 98B (2). pp. 203-209. ISSN 1552-4973

Walsh, Dan (2011) Design and retrofit a compressed gas powered engine to a motor scooter. [USQ Project]

Widodo, A. S. and Buttsworth, D. R. (2010) Stagnation temperature measurements in the USQ hypersonic wind tunnel. In: 17th Australasian Fluid Mechanics Conference (AFMC 2010), 5-9 Dec 2010, Auckland, New Zealand.

Wandel, Andrew P. (2010) Student usage of videos containing worked solutions. In: 21st Annual Conference for the Australasian Association for Engineering Education (AaeE 2010): Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Wang, Hao (2010) Sustainable materials research at USQ. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Walker, Cameron (2010) Automated soil compaction machine for the preparation of Califorian bearing ratio and proctor specimens. [USQ Project]

Wilson, Bede (2010) Development of an unmanned aerial vehicle for use during disaster situations. [USQ Project]

Wong, K. J. and Yousif, B. F. and Low, K. O. and Ng, Y. and Tan, S. L. (2010) Effects of fillers on the fracture behaviour of particulate polyester composites. Journal of Strain Analysis for Engineering Design, 45 (1). pp. 67-78. ISSN 0309-3247

Wandel, Andrew P. (2010) Linkages between courses: a holistic approach to programmes. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Wang, H. and Ning, Z. L. and Liang, W. Z. and Cao, F. Y. and Sun, J. F. (2010) Microstructure and properties of Mg-Nd-Zn-Zr alloys. In: 2009 International Conference and Exhibition on Materials and AustCeram (MA 2009), 1-3 Jul 2009, Gold Coast, Australia.

Wong, K. J. and Yousif, B. F. and Low, K. O. (2010) The effects of alkali treatment on the interfacial adhesion of bamboo fibres. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 224 (3). pp. 139-148. ISSN 1464-4207

Wang, Hao (2010) The role of casting temperature in preparation of bulk metallic glasses. In: 6th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC 2009): Processing, Fabrication, Properties, Applications, 25-29 Aug 2009, Berlin, Germany.

Widodo, A. and Buttsworth, D. R. (2009) Deduction of temperature fluctuations in transient compression wind tunnels using incompressible turbulent flow data. In: 3rd International Conference on Energy and Environment (ICEE 2009): Advancement Towards Global Sustainability, 7-8 Dec 2009, Malacca, Malaysia.

Wandel, Andrew P. and Lindstedt, R. Peter (2009) Application of hybrid binomial Langevin-multiple mapping conditioning method to reacting jet flow. In: Australian Combustion Symposium (ACS 2009), 2-4 Dec 2009, Brisbane, Australia.

Wandel, Andrew P. and Chakraborty, Nilanjan and Mastorakos, E. (2009) Direct numerical simulations of turbulent flame expansion in fine sprays. Proceedings of the Combustion Institute, 32 (2). pp. 2283-2290. ISSN 1540-7489

Wandel, Andrew P. and Lindstedt, R. Peter (2009) Hybrid binomial Langevin-multiple mapping conditioning modeling of a reacting mixing layer. Physics of Fluids, 21 (1). 015103-015116. ISSN 1070-6631

Wandel, Andrew P. (2009) Utilising tablet PCs in tutorials to aid external students. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia .

Walton, Joshua Graeme (2008) Investigation of a variable ride height suspension for an automobile. [USQ Project]

Wai-Ming, Yeung (2008) Confirmation program of safety inspection of lift components (CPSI). [USQ Project]

Wang, H. and Estrin, Y. and Zuberova, Z. (2008) Bio-corrosion of a magnesium alloy with different processing histories. Materials Letters, 62 (16). pp. 2476-2479. ISSN 0167-577X

Wang, H. and Li, Q. (2008) Solidification microstructure modelling using cellular automaton method. In: International Conference on Frontiers in Materials Science and Technology (FMST 2008), 26-28 Mar 2008, Brisbane, Australia.

Wang, H. and Shi, Z. M. and Yang, K. (2008) Magnesium and magnesium alloys as degradable metallic biomaterials. In: International Conference on Frontiers in Materials Science and Technology (FMST 2008), 26-28 Mar 2008, Brisbane, Australia.

Wang, H. and Estrin, Y. and Fu, H. M. and Song, G. L. and Zuberova, Z. (2007) The effect of pre-processing and grain structure on the bio-corrosion and fatigue resistance of magnesium alloy AZ31. Advanced Engineering Materials, 9 (11). pp. 967-972. ISSN 1438-1656

Weston, Bill Thomas (2007) Design and trial of an alternative option for suburban sewerage pump stations. [USQ Project]

Wang, Hao (2007) In-situ Si/Al composite produced by semisolid metal processing. Materials and Manufacturing Processes, 22 (5-6). pp. 696-699. ISSN 1042-6914

Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2007) Tungsten fibre reinforced Zr-based bulk metallic glass composites. Materials and Manufacturing Processes, 22 (5-6). pp. 687-691. ISSN 1042-6914

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2007) A practical thermodynamic method to calculate the best glass-forming composition for bulk metallic glasses. International Journal of Nonlinear Sciences and Numerical Simulation, 8 (2). pp. 171-178. ISSN 1565-1339

Wang, Hao and Fu, Huameng (2007) Development of bulk metallic glass composites. In: The world of bulk metallic glasses and their composites. Research Signpost, Kerala, India, pp. 73-92. ISBN 978-81-308-0196-4

Wang, Hao and Ning, Zhiliang (2007) Magnesium thixotropic structure produced by controlled nucleation method. Tezhong Zhuzao Ji Youse Hejin (Special Casting and Nonferrous Alloys) (Sp. Is). pp. 316-319. ISSN 1001-2249

Whittred, Daniel (2006) Developing a monitoring and control system for irrigation pumping units. [USQ Project]

Wang, Hao and Zhang, M. X. and Shi, Z. M. and Yang, Ke (2006) Biocorrosion behaviour of magnesium alloys under pseudo-physiological conditions. Tissue Engineering, 12 (4). p. 1067. ISSN 1076-3279

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2006) In-situ Cu-based bulk metallic glass composite. International Journal of Modern Physics B, 20 (25-27). pp. 3963-3968. ISSN 0217-9792

Wandel, Andrew P. and Klimenko, Alexander Y. (2005) Testing multiple mapping conditioning mixing for Monte Carlo probability density function simulations. Physics of Fluids, 17 (12). pp. 128105-1. ISSN 1070-6631

Wong, Wei Loon (2005) Compressed natural gas as an alternative fuel in diesel engines. [USQ Project]

Wang, Hao (2005) Bulk metallic glass composites. Journal of Materials Science and Technology, 21 (s1). pp. 86-90. ISSN 1005-0302

Wang, Hao and Song, Xiaoping and Yao, Xiangdong and Zhang, Haifeng and Hu, Zhuangqui (2005) Crystallization behavior of (Cu60Zr30Ti10)99Sn1 bulk metallic glass. Journal of Materials Science & Technology, 21 (s 1). pp. 51-53. ISSN 1005-0302

Woolf, Rodney J. (2005) Data mining using Matlab. [USQ Project]

Wang, Hao (2005) Semisolid structure formation and semisolid casting. Journal of Materials Science and Technology, 21 (s1). pp. 65-71. ISSN 1005-0302

Wang, Hao and Davidson, C. J. and StJohn, David H. (2004) Semisolid microstructural evolution of AlSi7Mg during partial remelting. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing , 368 (1-2). pp. 159-167. ISSN 0921-5093

Willgoss, Richard and Rosenfeld, Vivian and Billingsley, John (2003) High precision GPS guidance of mobile robots. In: 2003 Australasian Conference on Robotics and Automation (ACRA 2003), 1-3 Dec 2003, Brisbane, Australia.

X

Xing, F. and Zhao, M. and Zhang, S. (2012) Simulations of a cavity based two-dimensional scramjet model. In: 18th Australasian Fluid Mechanics Conference (AFMC), 3-7 Dec 2012, Launceston, Australia.

Xie, Shuisheng and Li, Xinggang and Wang, Hao and Zhang, Ying (2012) Semisolid processing technology. Metallurgical Industry Press, Beijing, China. ISBN 978-7-5024-5935-2

Xiang, Wei and Fok, Sai Cheong and Thimm, Georg (2004) Agent-based composable simulation for virtual prototyping of fluid power system. Computers in Industry, 54 (3). pp. 237-251. ISSN 0166-3615

Y

Yousif, B. F. (2013) Design of newly fabricated tribological machine for wear and frictional experiments under dry/wet condition. Materials and Design, 48. pp. 2-13. ISSN 0261-3069

Yousif, B. F. (2013) SI: materials, design and tribology [Editorial]. Materials and Design, 48. ISSN 0264-1275

Yousif, B. F. and Orupabo, C. and Azwa, Z. N. (2012) Characteristics of kenaf fibre immersed in different solutions. Journal of Natural Fibers, 9 (4). pp. 207-218. ISSN 1544-0478

Yang, Tao and Yao, Xiao and Zhang, Zuhua and Wang, Hao (2012) Mechanical property and structure of alkali-activated fly ash and slag blends. Journal of Sustainable Cement-Based Materials, 1 (4). pp. 167-178. ISSN 2165-0373

Yusaf, T. F. and Al-Juboori, Raed Ahmed (2012) Investigating the efficiency of ultrasound for controlling bio-fouling in batch membrane systems. In: USQ Combustion Meeting, 21 Nov 2012, Toowoomba, Australia.

Yusaf, T. F. and Al-lwayzy, Saddam H. (2012) The use of microalgae biodiesel in diesel engine: production, extraction and engine performance. In: USQ Combustion Meeting, 21 Nov 2012, Toowoomba, Australia.

Yang, T. and Yao, X. and Zhang, Z. and Wang, H. (2012) Effects of ground granulated blast furnace slag on the mechanical and microstructure of fly ash-based geopolymer binders. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Yan, Z. L. and Wang, H. and Lau, K. T. and Zhang, J. C. and Zhang, H. and Ding, Y. (2012) Fabrication process optimization of hemp fibre reinforced polypropylene composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Yousif, B. F. and Chin, C. W. (2012) Epoxy composite based on kenaf fibers for tribological applications under wet contact conditions. Surface Review and Letters, 19 (5). pp. 1250050-1. ISSN 0218-625X

Yousif, B. F. and Shalwan, A. and Chin, C. W. and Ming, K. C. (2012) Flexural properties of treated and untreated kenaf/epoxy composites. Materials and Design, 40. pp. 378-385. ISSN 0264-1275

Yousif, B. F. and Ku, H. (2012) Suitability of using coir fiber/polymeric composite for the design of liquid storage tanks. Materials and Design, 36. pp. 847-853. ISSN 0264-1275

Yousif, Belal F. (2012) Adhesive wear characteristics of natural fiber-reinforced composites. In: Wear of advanced materials. John Wiley & Sons, Inc., London, United Kingdom, pp. 61-97. ISBN 978-1-84821-352-4

Yousif, B. F. and Nirmal, Umar (2011) Wear and frictional performance of polymeric composites aged in various solutions. Wear, 272 (1). pp. 97-104. ISSN 0043-1648

Yusaf, T. F. and Yousif, B. F. and Elawad, M. M. (2011) Crude palm oil fuel for diesel-engines: experimental and ANN simulation approaches. Energy, 36 (8). 4871-4878. ISSN 0360-5442

Yusaf, T. and Saleh, K. H. and Said, M. A. (2011) Engine performance and emission analysis of LPG-SI engine with the aid of artificial neural network. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 225 (5). pp. 591-600. ISSN 0957-6509

Yusaf, Talal and Goh, Steven and Borserio, J. A. (2011) Potential of renewable energy alternatives in Australia. Renewable and Sustainable Energy Reviews, 15 (5). pp. 2214-2221. ISSN 1364-0321

Yousif, B. F. and Al-Shalabi, Ammar and Rilling, Dirk G. (2011) On integration of mirror collector and Stirling engine for solar power system. In: 2007 International Conference on Environment: Survival and Sustainability (ESS 2007), 19-24 Feb 2007, Nicosia, Northern Cyprus.

Yousif, B. F. and Yeh, Kok Soon (2011) Badminton training machine with impact mechanism. Journal of Engineering Science and Technology, 6 (1). pp. 61-68. ISSN 1823-4690

Yusaf, Talal (2011) Mechanical treatment of microorganisms using ultrasound, shock and shear technology. [Thesis (PhD/Research)]

Yousif, B. F. and El-Tayeb, N. S. M. (2010) Wear characteristics of thermoset composite under high stress three-body abrasive. Tribology International, 43 (12). pp. 2365-2371. ISSN 0301-679X

Yousif, B. F. and Nirmal, Umar and Wong, K. J. (2010) Three-body abrasion on wear and frictional performance of treated betelnut fibre reinforced epoxy (T-BFRE) composite. Materials and Design, 31 (9). pp. 4514-4521. ISSN 0264-1275

Yousif, B. F. (2010) Effect of oil palm fibres volume fraction on mechanical properties of polyester composites. International Journal of Modern Physics B, 24 (23). pp. 4459-4470. ISSN 0217-9792

Yousif, B. F. and Alsofyani, I. M. and Yusaf, Talal (2010) Adhesive wear and frictional characteristics of UHMWPE and HDPE sliding against different counterfaces under dry contact condition. Tribology, 4 (2). pp. 78-85. ISSN 1751-5831

Yusaf, Talal F. and Buttsworth, D. R. and Saleh, Khalid H. and Yousif, B. F. (2010) CNG-diesel engine performance and exhaust emission analysis with the aid of artificial neural network. Applied Energy, 87 (5). pp. 1661-1669. ISSN 0306-2619

Yousif, B. F. and Nirmal, U. (2010) On the mechanical properties of a treated betelnut fibre-reinforced polyester composite. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 224 (9). pp. 1805-1814. ISSN 0954-4062

Yusaf, Talal and Said, Mior Azman and Hussein, Ibrahim (2010) Performance and emission investigation of a four-stroke liquefied petroleum gas spark-ignition engine generator used in a Malaysian night market. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 224 (3). pp. 339-347. ISSN 0957-6509

Yousif, B. F. and Lau, Saijod T. W. and McWilliam, S. (2010) Polyester composite based on betelnut fibre for tribological applications. Tribology International, 43 (1-2). pp. 503-511. ISSN 0301-679X

Yousif, B. F. and El-Tayeb, N. S. M. (2010) Wet adhesive wear characteristics of untreated oil palm fibre-reinforced polyester and treated oil palm fibre-reinforced polyester composites using the pin-on-disc and block-on-ring techniques. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 224 (2). pp. 123-131. ISSN 1350-6501

Yousif, B. F. and Yusaf, Talal (2010) Abrasive wear behaviour of epoxy composite based on kenaf fibres. In: ASIATRIB 2010: Frontiers in Tribology - Knowledge and Friendship, 5-9 Dec 2010, Perth, Australia.

Yousif, B. F. and Devadas, Alvin and Yusaf, Talal (2009) Adhesive wear and frictional behaviour of multilayered polyester composite based on betelnut fiber mats under wet contact conditions. Surface Review and Letters, 16 (3). pp. 407-414. ISSN 0218-625X

Yusaf, Talal F. (2009) Diesel engine optimization for electric hybrid vehicles. Journal of Energy Resources Technology, 131 (1). 12203-1-12203-4. ISSN 0195-0738

Yousif, B. F. (2009) Frictional and wear performance of polyester composites based on coir fibres. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (1). 51 -59. ISSN 1350-6501

Yousif, Belal F. and Leong, Ong B. and Ong, Low K. and Jye, Wong K. (2009) The effect of treatment on tribo-performance of CFRP composites. Recent Patents on Materials Science, 2 (1). pp. 67-74. ISSN 1874-4648

Yousif, B. F. and Gill, Nirmal Singh and Lau, Saijod T. W. and Devadas, Alvin (2009) The potential of using betelnut fibres for tribo-polyester composites considering three different orientations. In: ASME International Mechanical Engineering Congress and Exposition (IMECE 2008), 31 Oct-6 Nov 2008, Boston, MA. United States.

Yusaf, Talal and Najafi, G. and Buttsworth, David (2009) Theoretical and experimental investigation of SI engine performance and exhaust emissions using ethanol-gasoline blended fuels. In: 3rd International Conference on Energy and Environment (ICEE 2009): Advancement Towards Global Sustainability, 7-8 Dec 2009, Malacca, Malaysia.

Yavu, Isei Ledua (2008) Fracture toughness of phenolic resins composite by using saw dust as filler of percentage by weight. [USQ Project]

Yousif, B. F. and El-Tayeb, N. S. M. (2008) High-stress three-body abrasive wear of treated and untreated oil palm fibre-reinforced polyester composites. Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, 222 (5). pp. 637-646. ISSN 1350-6501

Yousif, B. F. and El-Tayeb, N. S. M. (2008) Wear and friction characteristics of CGRP composite under wet contact condition using two different test techniques. Wear, 265 (5-6). pp. 856-864. ISSN 0043-1648

Yousif, B. F. (2008) Replacing of glass fibres with seed oil palm fibres for tribopolymeric composites. Tribology - Materials, Surfaces and Interfaces, 2 (2). pp. 99-103. ISSN 1751-5831

Yousif, B. F. and El-Tayeb, N. S. M. and Yusaf, Talal (2008) Influence of material structure properties on sliding contact performance of CGRP composite. International Journal for Manufacturing Science and Technology, 10 (1). pp. 1-7. ISSN 1524-1548

Yok Meng, Tan (2007) Design of a microclimate ventilation system. [USQ Project]

Yousif, B. F. and El-Tayeb, N. S. M. (2007) Tribological evaluations of polyester composites considering three orientations of CSM glass fibres using BOR machine. Applied Composite Materials, 14 (2). pp. 105-116. ISSN 1573-4897

Yusaf, Talal and Buttsworth, David R. (2007) Characterisation of mixing rate due to high power ultrasound. Ultrasonics Sonochemistry, 14 (2). pp. 266-274. ISSN 1350-4177

Yousif, B. F. and Jye, W. K. and El-Tayeb, N. S. M. (2007) An investigation on tensile, compression and flexural properties of natural fibre reinforced polyester composites. In: ASME 2007 International Mechanical Engineering Congress and Exposition (IMECE2007), 11-15 Nov 2007, Seattle, Washington, USA.

Yousif, B. F. and El-Tayeb, N. S. M. (2007) Effect of water as lubricant on friction and wear properties of CGRP composite evaluated by POD and BOR techniques. Surface Review and Letters, 14 (2). pp. 185-191. ISSN 0218-625X

Yousif, B. F. and El-Tayeb, N. S. M. (2007) On the effect of woven glass fabric orientations on wear and friction properties of polyester composite. Surface Review and Letters, 14 (3). pp. 489-497. ISSN 0218-625X

Yousif, B. F. and El-Tayeb, N. S. M. (2007) The effect of oil palm fibers as reinforcement on tribological performance of polyester composite. Surface Review and Letters, 14 (6). pp. 1095-1102. ISSN 0218-625X

Yousif, B. F. and El-Tayeb, N. S. M. and Yusaf, Talal (2006) The effects of load and velocity on friction and interface temperature of CGRP sliding against smooth stainless steel. In: 8th Biennial ASME Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Italy.

Yao, X. D. and Wu, C. Z. and Wang, Hao and Cheng, H. M. and Lu, G. Q. (2006) Effects of carbon nanotubes and metal catalysts on hydrogen storage in magnesium nanocomposite. Journal of Nanoscience and Nanotechnology, 6 (2). pp. 494-498. ISSN 1533-4880

Yao, X. and Wang, H. (2006) Modeling of semisolid structure formation in controlled nucleation method. International Journal of Modern Physics B, 20 (25-27). pp. 4123-4128. ISSN 0217-9792

Yao, X. and Wang, H. and He, B. and Zhou, X. (2006) Numerical simulation of dendrite growth during solidification. International Journal of Nonlinear Sciences and Numerical Simulation, 7 (2). pp. 171-176. ISSN 1565-1339

Yap, Lee Jiuan (2005) Evaluation of wet scrubber systems. [USQ Project]

Yusaf, T. F. and Yusoff, M. Z. and Hussein, I. and Fong, S. H. (2005) A quasi one-dimensional simulation of a 4 stroke spark ignition hydrogen fuelled engine. American Journal of Applied Sciences, 2 (8). pp. 1206-1212. ISSN 1546-9239

Yan, Wenyi (2005) Mechanics examination on the wear behaviour of shape memory alloys. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005): Advances in Applied Mechanics, 16-18 Feb 2005, Melbourne, Australia.

Yan, Wenyi and Liu, Hong-Yuan and Mai, Yiu-Wing (2004) Mode II delamination toughness of z-pinned laminates. Composites Science and Technology, 64 (13-14). pp. 1937-1945. ISSN 0266-3538

Yew, Yip Soon (2004) Production flow analysis & inventory control for Orford Refrigeration. [USQ Project]

Yusaf, Talal and Al-Atabi, Mushtak Talib Ali and Buttsworth, David R. (2003) Small scale power generation using a dual fuel system. RERIC International Energy Journal, 4 (2). pp. 129-138. ISSN 0857-6173

Yan, Wenyi and Wang, Chun Hui and Zhang, Xin Ping and Mai, Yiu-Wing (2003) Theoretical modelling of the effect of plasticity on reverse transformation in superelastic shape memory alloys. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing , 354 (1-2). pp. 146-157. ISSN 0921-5093

Yan, Wenyi and Liu, Hong-Yuan and Mai, Yiu-Wing (2003) Numerical study on the mode I delamination toughness of z-pinned laminates. Composites Science and Technology, 63 (10). pp. 1481-1493. ISSN 0266-3538

Yusaf, Talal F. and Talib, Mushtak (2003) Experimental investigation for the design of ECU for a single cylinder engine using dual-fuel (CNG-diesel). In: 2003 Asian Conference on Sensors (AsiaSENSE 2003), 18 July 2003, Kebangsann, Malaysia.

Yan, Wenyi and O'Dowd, Noel P. and Busso, Esteban P. (2002) Numerical study of sliding wear caused by a loaded pin on a rotating disc. Journal of the Mechanics and Physics of Solids, 50 (3). pp. 449-470. ISSN 0022-5096

Yan, Wenyi and Busso, Esteban P. and O'Dowd, Noel P. (2000) A micromechanics investigation of sliding wear in coated components. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 456 (2002). pp. 2387-2407. ISSN 1364-5021

Yusaf, Talal and Yusoff, Mohammed Zamri (2000) Development of a 3D CFD model to investigate the effect of the mixing quality on the CNG-diesel engine performance. In: The International Conference and Exhibition and Natural Gas Vehicles, 17-19 Oct 2000, Yokohama, Japan.

Z

Zander, F. and Morgan, R. G. and Sheikh, U. A. and Buttsworth, D. R. and Teakle, P. R. (2013) Hot wall testing methodology for impulse facilities. In: 18th AIAA/3AF International Space Planes and Hypersonic Systems and Technologies Conference (AIAA 2012), 24-28 Sep 2012, Tours, France.

Zhao, M. M. and Saulov, D. N. and Cleary, M. J. and Klimenko, A. Y. (2012) Numerical simulation of coal gasification with CO2 capture based on two-dimensional fluidized bed model. International Journal of Chemical Engineering and Applications, 3 (6). pp. 466-470. ISSN 2010-460X

Zhang, Zuhua and Wang, Hao and Provis, John L. (2012) Quantitative study of the reactivity of fly ash in geopolymerization by FTIR. Journal of Sustainable Cement-Based Materials, 1 (4). pp. 154-166. ISSN 2165-0373

Zhang, Z. and Wang, H. and Provis, J. L. (2012) The reactivity of fly ash in geopolymer synthesis: a qualification study by FTIR. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Zhang, Zuhua and Wang, Hao and Provis, John L. and Bullen, Frank and Reid, Andrew and Zhu, Yingcan (2012) Quantitative kinetic and structural analysis of geopolymers. Part 1. The activation of metakaolin with sodium hydroxide. Thermochimica Acta, 539. pp. 23-33. ISSN 0040-6031

Zhang, Z. and Wang, H. and Yao, X. and Zhu, Y. (2012) Effects of halloysite in kaolin on the formation and properties of geopolymers. Cement and Concrete Composites, 34 (5). pp. 709-715. ISSN 0958-9465

Zhang, Z. and Wang, H. and Reid, A. and Aravinthan, T. (2011) Effects of fly ash source and curing procedure on strength development of geopolymers. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Zhu, Zhengwang and Zhang, Haifeng and Wang, Hao and Ding, Bingzhe and Hu, Zhuang-Qi and Huang, Han (2009) Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting [+ Erratum]. Journal of Materials Research, 24 (10). pp. 3108-3115. ISSN 0884-2914

Zerbst, Samuel David William (2009) Temperature effects on a fibre reinforced polymer material. [USQ Project]

Zhong, Xiaoliang (2009) Tensile strength of sawdust reinforced vinyl ester composites. [USQ Project]

Zhu, Z. W. and Zhang, H. F. and Wang, H. and Ding, B. Z. and Hu, Z. Q. (2008) Influence of casting temperature on the thermal stability of Cu- and Zr-based metallic glasses: theoretical analysis and experiments. Journal of Materials Research, 23 (10). pp. 2714-2719. ISSN 0884-2914

Zong, Xuejin (2008) Investigation of the best percentage by weight of glass powder as fillers, in phenolic resins using flexural tests. [USQ Project]

Zhang, Chi and Zhao, Mengmeng and Lin, Yu-zhen and Liu, Gao-en (2007) Effect of inclined angle on discharge coefficient of the discrete holes in curved wall. Journal of Aerospace Power, 22 (7). pp. 1127-1131. ISSN 1000-8055

Zhao, Mengmeng and Zhang, Chi and Lin, Yu-zhen and Liu, Gao-en (2007) Study of overall cooling effectiveness of discrete holes with different angles to concave wall. Journal of Aerospace Power, 22 (2). pp. 210-215. ISSN 1000-8055

Zhang, Chi and Xu, Quanhong and Zhao, Mengmeng and Lin, Yuzhen and Liu, Gaoen (2006) Effect of impingement/effusion hole-area ratio on discharge coefficients of double cooling wall. In: ASME Turbo Expo 2006, 8-11 May 2006, Barcelona, Spain.

Zakaria, S. and Yusaf, T. and Yusoff, M. Z. (2006) Flow and transient heat transfer in a high speed free piston tunnel: CFD simulations on turbulent and laminar flow conditions. In: 2nd International Conference on Thermal Engineering Theory and Applications (ICTEA '06), 3-6 Jan 2006, Al Ain, United Arab Emirates.

This list was generated on Wed Dec 12 07:32:00 2018 AEST.