Response surface methodology (RSM) based multi-objective optimization of fusel oil-gasoline blends at different water content in SI engine

Awad, Omar I. and Mamat, R. and Ali, Obed M. and Azmi, W. H. and Kadirgama, K. and Yusri, I. M. and Leman, A. M. and Yusaf, T. (2017) Response surface methodology (RSM) based multi-objective optimization of fusel oil-gasoline blends at different water content in SI engine. Energy Conversion and Management, 150. pp. 222-241. ISSN 0196-8904


Abstract

The main objective of this study is to determine the optimal blend ratio of fusel oil–gasoline before and after water extraction (FBWE10, FBWE20, FAWE10, and FAWE20) regarding the performance and emissions of spark ignition engine using response surface methodology (RSM). The multi-objective optimization is applied to maximize the brake power, brake thermal efficiency and minimize the brake specific fuel consumption (BSFC), NOx emission, HC emission and CO emission. The water content of fusel oil has been extracted by employing rotary extractor method. The experimental of this study has been carried out with different fusel oil–gasoline blends, different throttle valve opening position (15%, 30%, 45% and 60%) and different engine speed (1500, 2500, 3500 and 4500 rpm). All the developed models for responses were determined to be statistically significant at 95% confidence level. The study results reveal an improvement in heating value of fusel oil after water extraction with FAWE20 (80 vol% gasoline fuel, 20 vol% fusel oil after water extracted) as the optimally blended fuel. The best condition of engine parameters with FAWE20 were 55.4% of WOT for load and 4499 rpm engine speed. In additional of the optimal values with a high desirability of 0.707 were 62.511 kW, 241.139 g/kW h, 36%, 1895.913 ppm140.829 ppm and % for brake power, BSFC, BTE, NOx, HC and CO emissions respectively. The reduction of water content in fusel oil has a statistical significance influence to increases BTE, NOx emission and decreases the BSFC, HC and CO emissions.


Statistics for USQ ePrint 48703
Statistics for this ePrint Item
Item Type: Article (Commonwealth Reporting Category C)
Refereed: Yes
Item Status: Live Archive
Additional Information: Files associated with this item cannot be displayed due to copyright restrictions.
Faculty/School / Institute/Centre: Historic - Faculty of Health, Engineering and Sciences - School of Civil Engineering and Surveying (1 Jul 2013 - 31 Dec 2021)
Faculty/School / Institute/Centre: Historic - Faculty of Health, Engineering and Sciences - School of Civil Engineering and Surveying (1 Jul 2013 - 31 Dec 2021)
Date Deposited: 03 Jun 2022 00:07
Last Modified: 09 Jun 2022 03:47
Uncontrolled Keywords: RSM, Fusel oil, Water content, Heating value, Engine performance, Engine emissions
Fields of Research (2008): 09 Engineering > 0913 Mechanical Engineering > 091303 Autonomous Vehicles
09 Engineering > 0902 Automotive Engineering > 090201 Automotive Combustion and Fuel Engineering (incl. Alternative/Renewable Fuels)
Fields of Research (2020): 40 ENGINEERING > 4007 Control engineering, mechatronics and robotics > 400703 Autonomous vehicle systems
40 ENGINEERING > 4002 Automotive engineering > 400201 Automotive combustion and fuel engineering
Identification Number or DOI: https://doi.org/10.1016/j.enconman.2017.07.047
URI: http://eprints.usq.edu.au/id/eprint/48703

Actions (login required)

View Item Archive Repository Staff Only