Development of operator interfaces for a heavy maintenance manipulator

Milani, Peter (2014) Development of operator interfaces for a heavy maintenance manipulator. [Thesis (PhD/Research)]

Text (Introductory Pages)

Download (11MB) | Preview
Text (Whole Thesis)

Download (11MB) | Preview


This dissertation details the development of an intuitive operator interface for a complex serial manipulator, to be used in heavy maintenance tasks. This interface
allows the operator to control the manipulator in the 'task-space', with software handling the conversion to 'joint-space'. Testing of the interfaces shows operator
task-space control to be most effective in reducing operator workload and improving the ease of use of a complex machine. These methods are applicable in concept, to a wider range of manipulators and other machines.

A number of operator interfaces were developed: a Joystick Interface, a Master Arm interface and a 6-D Mouse Interface. The Joystick Interface made use of a task space
to joint space transformation implemented in software. The Master Arm utilised a scale model to conduct the transformation. Finally, a 3D mouse Interface utilised
sensors in an Android Device with a software based task to joint space transformation. These interfaces were tested and the Joystick Interface proved most suitable according to the operator's subjective opinion. Quantitative measurement also showed that it accurately reproduced the operator's commands.

The software transformation developed for the Joystick and 6-D Mouse interfaces utilised the Jacobian Matrix to complete the task-space to joint-space conversion.
However, since the manipulator contained a redundant joint, an additional algorithm was required to handle the redundancy. This additional algorithm also improved
manipulator safety, as it navigated the arm away from singularities which could result in large joint movement. The novelty of this algorithm is based on its pragmatic approach, and could be modified to achieve a number of safety or performance goals.

The control strategy centred on the operator specifying commands to the arm in the frame of the task. The developed algorithm enabled the control strategy by ensuring
that viable solutions for joint velocity could be found in a manipulator that has redundant joints. Furthermore, this algorithm utilised a cost function that minimised
the chances of large joint movements due to singularities, improving the safety of the device.

Overall, the project has delivered a viable operator interface for controlling a complex, redundant manipulator. This interface was tested against a number of
alternate operator interfaces. The contrasting results of the strengths and weaknesses of various interfaces meant that a number of key insights were gained, and a
pragmatic approach to redundancy management was developed.

Statistics for USQ ePrint 25941
Statistics for this ePrint Item
Item Type: Thesis (PhD/Research)
Item Status: Live Archive
Additional Information: Master of Engineering Research (MENR) thesis.
Faculty/School / Institute/Centre: Current - Faculty of Health, Engineering and Sciences - No Department (1 Jul 2013 -)
Faculty/School / Institute/Centre: Current - Faculty of Health, Engineering and Sciences - No Department (1 Jul 2013 -)
Supervisors: Billingsley, John
Date Deposited: 05 Sep 2014 02:10
Last Modified: 13 Jul 2016 02:02
Uncontrolled Keywords: operator interfaces, heavy maintenance manipulator, mines, mining
Fields of Research (2008): 09 Engineering > 0906 Electrical and Electronic Engineering > 090602 Control Systems, Robotics and Automation
09 Engineering > 0913 Mechanical Engineering > 091302 Automation and Control Engineering
09 Engineering > 0914 Resources Engineering and Extractive Metallurgy > 091405 Mining Engineering

Actions (login required)

View Item Archive Repository Staff Only