Xia, Zhigang and Wang, Xin and Ye, Wenxiang and Xu, Weilin and Eltahir, Hafiz A. (2011) Effect of repeated winding on carded ring cotton yarn properties. Fibers and Polymers, 12 (4). pp. 534-540. ISSN 1229-9197
Abstract
In this study, ten carded ring spun cotton yarns were subjected to windings. Yarn hairiness, fineness, unevenness and tensile properties were then examined. Results showed that the majority of the increased yarn hairiness occurred at the beginning cycles of windings. Weight loss occurred for most yarns after repeated windings. Tensile properties deteriorated for nearly all the yarn samples after repeated windings. On the contrary, yarn unevenness was improved for most yarns after corresponding windings. To explain the better evenness of yarn after repeated windings, unevenness of yarn was divided into two parts, namely stem unevenness and surface hairiness unevenness; yarn imperfections were subdivided into two categories: the imperfections of yarn stem and the imperfections caused by yarn hairs. Specifically, a balanced opinion was given to discuss the gains and losses in quality and cost due to repeated windings.
|
Statistics for this ePrint Item |
| Item Type: | Article (Commonwealth Reporting Category C) |
|---|---|
| Refereed: | No |
| Item Status: | Live Archive |
| Additional Information: | © 2011 The Korean Fiber Society and Springer Netherlands. Permanent restricted access to published version in accordance with the copyright policy of the publisher. |
| Faculty/School / Institute/Centre: | Historic - Faculty of Engineering and Surveying - No Department |
| Date Deposited: | 15 Jul 2014 23:23 |
| Last Modified: | 01 Jun 2017 06:15 |
| Uncontrolled Keywords: | hairiness; repeated windings; tensile property; unevenness CV; yarn fineness |
| Fields of Research : | 09 Engineering > 0912 Materials Engineering > 091299 Materials Engineering not elsewhere classified 09 Engineering > 0910 Manufacturing Engineering > 091012 Textile Technology 09 Engineering > 0913 Mechanical Engineering > 091307 Numerical Modelling and Mechanical Characterisation |
| Socio-Economic Objective: | B Economic Development > 86 Manufacturing > 8604 Leather Products, Fibre Processing and Textiles > 860403 Natural Fibres, Yarns and Fabrics |
| Identification Number or DOI: | 10.1007/s12221-011-0534-1 |
| URI: | http://eprints.usq.edu.au/id/eprint/25505 |
Actions (login required)
 |
Archive Repository Staff Only |