Items where Subject is "290000 Engineering and Technology > 291400 Materials Engineering"

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors Name | Item Type
Jump to: C | F | K | L | N | W | Y
Number of items at this level: 31.

C

Cardona, F. and Ku, H. and Pattarachaiyakoop, N. and Rogers, D. and Trada, M. (2007) Fracture toughness of phenol formaldehyde composites post-cured in microwaves. Journal of Electromagnetic Waves and Applications, 21 (14). pp. 2137-2146. ISSN 0920-5071

Chen, G. and Baker, Graham (2004) An analytical model for predication of crack spacing due to shrinkage in concrete pavements. Journal of Structural Engineering, 130 (10). pp. 1529-1533. ISSN 0733-9445

Chen, G. and Baker, Graham (2004) Enhanced approach to consistency in gradient-dependent plasticity. Advances in Structural Engineering, 7 (3). pp. 279-283. ISSN 1369-4332

Chen, G. and Baker, Graham (2004) Incompatible 4-node element for gradient-dependent plasticity. Advances in Structural Engineering, 7 (2). pp. 169-177. ISSN 1369-4332

Chen, G. and Baker, Graham (2003) Influence of bond slip on crack spacing in numerical modeling of reinforced concrete. Journal of Structural Engineering, 129 (11). pp. 1514-1521. ISSN 0733-9445

Choi, Richard Fun Yiu (2005) Review of the jet grouting method. [USQ Project] (Unpublished)

F

French, Vivienne Joyce (2005) The investigation into modes of failure of total hip replacements. [USQ Project] (Unpublished)

Fu, H. M. and Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2006) In situ TiB-reinforced cu-based bulk metallic glass composites. Scripta Materialia, 54 (11). pp. 1961-1966. ISSN 1359-6462

Fu, H. M. and Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2006) The effect of Gd addition on the glass-forming ability of Cu-Zr-Al alloy. Scripta Materialia, 55 (2). pp. 147-150. ISSN 1359-6462

Fu, H. M. and Zhang, H. F. and Wang, Hao and Hu, Z. Q. (2007) Multifarious fracture features of CuZrAlGd(Ag) bulk metallic glasses. Advanced Materials Research, 29-30. pp. 47-50. ISSN 1022-6680

K

Karunasena, W. (2004) Numerical modelling of obliquely incident guided wave scattering by a crack in a laminated composite plate. In: 2004 Structural Integrity and Fracture International Conference (SIF2004), 26-29 Sept 2004, Brisbane, Australia.

L

Lee, Kwan Shing (2005) Fracture analysis of vinyl ester composites under microwave condition. [USQ Project] (Unpublished)

N

Ning, Zhiliang and Cao, P. and Wang, Hao and Sun, Jianfei and Liu, Diankun (2007) Effect of cooling conditions on grain size of AZ91 alloy. Journal of Materials Science and Technology, 23 (5). pp. 645-649. ISSN 1005-0302

Ning, Zhiliang and Wang, Hao and Sun, Jianfei (2006) The effect of initial microstructure of A356 alloys on the mechanical behavior in the semisolid state. Solid State Phenomena, 116-11. pp. 449-452. ISSN 1012-0394

Ning, Zhiliang and Wu, Peilian and Wang, Hao and Cao, Fuyang and Sun, Jianfei (2007) Effect of pouring temperature on thixotropic microstructure formation of AZ91. Rare Metals, 26 (S1). pp. 180-184. ISSN 1001-0521

W

Wang, H. and Estrin, Y. and Fu, H. M. and Song, G. L. and Zuberova, Z. (2007) The effect of pre-processing and grain structure on the bio-corrosion and fatigue resistance of magnesium alloy AZ31. Advanced Engineering Materials, 9 (11). pp. 967-972. ISSN 1438-1656

Wang, H. and Yao, X. D. (2006) Semisolid structure simulation in controlled nucleation process. Solid State Phenomena, 116-11. pp. 614-617. ISSN 1012-0394

Wang, Hao (2005) Bulk metallic glass composites. Journal of Materials Science and Technology, 21 (s1). pp. 86-90. ISSN 1005-0302

Wang, Hao (2006) In-situ Si/Al composite produced by semisolid metal processing. In: ACUN-5 International Composites Conference, 11-14 July 2006, Sydney, Australia.

Wang, Hao (2007) In-situ Si/Al composite produced by semisolid metal processing. Materials and Manufacturing Processes, 22 (5-6). pp. 696-699. ISSN 1042-6914

Wang, Hao (2005) Semisolid structure formation and semisolid casting. Journal of Materials Science and Technology, 21 (s1). pp. 65-71. ISSN 1005-0302

Wang, Hao and Davidson, C. J. and StJohn, David H. (2004) Semisolid microstructural evolution of AlSi7Mg during partial remelting. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing , 368 (1-2). pp. 159-167. ISSN 0921-5093

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2007) A practical thermodynamic method to calculate the best glass-forming composition for bulk metallic glasses. International Journal of Nonlinear Sciences and Numerical Simulation, 8 (2). pp. 171-178. ISSN 1565-1339

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2006) In-situ Cu-based bulk metallic glass composite. International Journal of Modern Physics B, 20 (25-27). pp. 3963-3968. ISSN 0217-9792

Wang, Hao and Ning, Zhiliang (2007) Magnesium thixotropic structure produced by controlled nucleation method. Tezhong Zhuzao Ji Youse Hejin (Special Casting and Nonferrous Alloys) (Sp. Is). pp. 316-319. ISSN 1001-2249

Wang, Hao and Xu, Jun (2006) Semisolid casting of automotive component: water pump lid. Solid State Phenomena, 116-11. pp. 88-91. ISSN 1012-0394

Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2007) Tungsten fibre reinforced Zr-based bulk metallic glass composites. Materials and Manufacturing Processes, 22 (5-6). pp. 687-691. ISSN 1042-6914

Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2006) Tungsten fibre reinforced Zr-based bulk metallic glass composites. In: ACUN-5 International Composites Conference, 11-14 July 2006, Sydney, Australia.

Wang, Hao and Zhang, M. X. and Shi, Z. M. and Yang, Ke (2006) Biocorrosion behaviour of magnesium alloys under pseudo-physiological conditions. Tissue Engineering, 12 (4). p. 1067. ISSN 1076-3279

Y

Yao, X. and Wang, H. (2006) Modeling of semisolid structure formation in controlled nucleation method. International Journal of Modern Physics B, 20 (25-27). pp. 4123-4128. ISSN 0217-9792

Yao, X. and Wang, H. and He, B. and Zhou, X. (2006) Numerical simulation of dendrite growth during solidification. International Journal of Nonlinear Sciences and Numerical Simulation, 7 (2). pp. 171-176. ISSN 1565-1339

This list was generated on Tue Sep 30 23:38:04 2014 EST.