Browse by Subject

Mossad, Ruth (2011) Cooling towers. In: Capehart, Barney L., (ed.) Encyclopedia of energy engineering and technology. Taylor & Francis Books, London, United Kingdom, pp. 246-254. ISBN 978-0-8493-3653-9

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

Amir, Al-Falahi and Yusoff, M. Z. and Yusaf, T. (2010) Numerical simulation of inviscid transient flows in shock tube and its validations. International Journal of Mathematical, Physical and Engineering Sciences, 4 (1). pp. 52-62. ISSN 1307-7465

Malpress, Ray and Buttsworth, David (2010) A comparison between two-position variable compression ratio and continuously variable compression ratio engines using numerical simulation. In: ICEF 2009: ASME Internal Combustion Engine Division Fall Technical Conference , 27-30 Sep 2009, Lucerne, Switzerland.

Yousif, B. F. and Devadas, Alvin and Yusaf, Talal (2009) Adhesive wear and frictional behaviour of multilayered polyester composite based on betelnut fiber mats under wet contact conditions. Surface Review and Letters, 16 (3). pp. 407-414. ISSN 0218-625X

Rahimi, Hadi and Ghobadian, Barat and Yusaf, Talal and Najafi, Gholamhasan and Khatamifar, Mahdi (2009) Diesterol: an environment-friendly IC engine fuel. Renewable Energy, 34 (1). pp. 335-342. ISSN 0960-1481

Wandel, Andrew P. and Lindstedt, R. Peter (2009) Application of hybrid binomial Langevin-multiple mapping conditioning method to reacting jet flow. In: Australian Combustion Symposium 2009 (ACS09), 2-4 Dec 2009, Brisbane, Australia.

Epaarachchi, J. A. (2009) Change of dynamic response of pultruded composite components used in advanced composite structures due to fatigue and fracture. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Schroll, Peter and Wandel, Andrew P. and Cant, R. Stewart and Mastorakos, E. (2009) Direct numerical simulations of autoignition in turbulent two-phase flows. Proceedings of the Combustion Institute, 32 (2). pp. 2275-2282. ISSN 1540-7489

Wandel, Andrew P. and Chakraborty, Nilanjan and Mastorakos, E. (2009) Direct numerical simulations of turbulent flame expansion in fine sprays. Proceedings of the Combustion Institute, 32 (2). pp. 2283-2290. ISSN 1540-7489

Sharifian, Ahmad and Buttsworth, David R. (2009) Direct radiation from wildfires through square woven screens. In: ASME 2008: Summer Heat Transfer Conference, 10-14 Aug 2008, Jacksonville, FL. USA.

Epaarachchi, Jayantha A. and Birt, Peter (2009) Dynamic behaviour of laterally loaded pultruted composite beams. In: 9th International Conference of the Mechanical and Physical Behaviour of Materials Under Dynamic Loading (DYMAT 2009), 7-11 Sept 2009, Brussels, Belgium.

Wandel, Andrew P. and Lindstedt, R. Peter (2009) Hybrid binomial Langevin-multiple mapping conditioning modeling of a reacting mixing layer. Physics of Fluids, 21 (1). 015103-015116. ISSN 1070-6631

Mossad, Ruth and Vella, Anthony and Balusu, Rao (2009) Inertisation of highwall mining to control methane concentrations at the Moura mine. In: 7th International Conference on Computational Fluid Dynamics in the Minerals and Process Industries (CFD2009), 9-11 Dec 2009, Melbourne, Australia.

Strunin, Dmitry V. and Roberts, Anthony J. (2009) Low-dimensional boundary-layer model of turbulent dispersion in a channel. In: WCE 2009: World Congress of Engineering , 1-3 Jul 2009, London, United Kingdom.

Mossad, Ruth and Yang, William and Schwarz, M. Philip (2009) Numerical prediction of air flow in a sharp 90 degree elbow. In: 7th International Conference on Computational Fluid Mechanics in the Minerals and Process Industries (CFD2009), 9-11 Dec 2009, Melbourne, Australia.

Mossad, R. R. (2009) Numerical predictions of air temperature and velocity to assist in the design of free ventilation piggeries. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Mossad, Ruth (2009) Optimization of the ventilation system for a forced ventilation piggery. Journal of Green Building, 4 (4). pp. 113-133. ISSN 1552-6100

Lear, Foster Robert (2008) Hoist system for small boat stacker. [USQ Project] (Unpublished)

Padda, Ranjit Singh (2008) Air flow through two layered mesh at varying porosity and spacing. [USQ Project] (Unpublished)

Cleary, Edward Thomas (2008) Pulsed liquid jet for rock breaking. [USQ Project] (Unpublished)

Yavu, Isei Ledua (2008) Fracture toughness of phenolic resins composite by using saw dust as filler of percentage by weight. [USQ Project] (Unpublished)

Strong, Simon James (2008) Design of a small wind turbine. [USQ Project] (Unpublished)

Cecil, Travis (2008) Investigate the best percentage by weight of glass powder, as fillers in phenolic resins using tensile tests. [USQ Project] (Unpublished)

Zong, Xuejin (2008) Investigation of the best percentage by weight of glass powder as fillers, in phenolic resins using flexural tests. [USQ Project] (Unpublished)

Lamari, Alfio Concetto (2008) Rolling stock bearing condition monitoring systems. [USQ Project] (Unpublished)

Shekhar, Shashi (2008) Tensile strength of sawdust reinforced phenolic resin composite materials. [USQ Project] (Unpublished)

Kenna, Brian (2008) Water metering and revenue protection. [USQ Project] (Unpublished)

Wai-Ming, Yeung (2008) Confirmation program of safety inspection of lift components (CPSI). [USQ Project] (Unpublished)

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2008) Investigation of embedded near infrared fibre Bragg grating (FBG) sensors (830 nm) in structural health monitoring of glass fibre composite structures. In: OFS-19: 19th International Conference on Optical Fibre Sensors , 14-18 April 2008, Perth, Australia.

Malpress, Ray and Buttsworth, David R. (2007) A new internal combustion engine configuration: opposed pistons with crank offset. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Sharifian, Ahmad and Buttsworth, David R. (2007) Computational simulation of the wind-force on metal meshes. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Buttsworth, D. R. and Davison, C. and MacLeod, J. D. and Strapp, J. W. (2007) Evaporator design for an isokinetic total water content probe in a naturally aspirating configuration. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Malpress, Ray (2007) A new internal combustion engine configuration - opposed piston with crank offset. [USQ Project] (Unpublished)

Holzheimer, Carson Keith (2007) Automation of the rollingstock twist test. [USQ Project] (Unpublished)

Kleynhans, Claudius Justus (2007) Design and review of Millmerran coal handling plant. [USQ Project] (Unpublished)

Yok Meng, Tan (2007) Design of a microclimate ventilation system. [USQ Project] (Unpublished)

Parkin, Damion Ian Harcourt (2007) Design of a rear suspension configuration for a live axle race car to achieve optimum handling characteristics. [USQ Project] (Unpublished)

Hicks, Kevin Charles (2007) Design of aeration ploughing tool for poultry litter within shed to reduce odour generation. [USQ Project] (Unpublished)

Stewart, Robert (2007) Design of electro-hydraulic controlled poppet valves. [USQ Project] (Unpublished)

Thiess, Jeremy (2007) Development of a test frame to investigate the propagation of pressure waves generated by a thunderbolt hammer. [USQ Project] (Unpublished)

Jones, Bruce Thomas (2007) Dragline maintenance engineering. [USQ Project] (Unpublished)

Coaker, Warren (2007) How engineers become CEOs - implications for education and training. [USQ Project] (Unpublished)

Gustafson, Adrian Mark (2007) Investigation of a new generation degradable implant material. [USQ Project] (Unpublished)

Booshand, Peter John (2007) Literature review of advanced research and innovation in the mining industry. [USQ Project] (Unpublished)

Crowe, Daniel Leigh (2007) Management of physical assets at Purga Quarry. [USQ Project] (Unpublished)

El Komy, Ahmed (2007) Millmerran Power Station ROM coal blockage removal system. [USQ Project] (Unpublished)

Lefhoko, Mmitsi (2007) Power station operations Millmerran power station feed water dissolved oxygen control. [USQ Project] (Unpublished)

Sullivan, Steven Michael (2007) Research, design and develop a pipe latching/unlatching device that can be used to help automate the pipe tripping process. [USQ Project] (Unpublished)

Lee, Wai Hung (2007) Shrinkage reduction of thermoset matrix particulate reinforced composites during hardening using low power microwave. [USQ Project] (Unpublished)

Hansen, Luke (2007) The use of waste cooking oil as an alternative fuel for the diesel engine. [USQ Project] (Unpublished)

Davidson, Thomas Peter George (2007) Using tensile tests as benchmark, investigate the best percentage by weight of slg, as fillers, in Phenolic resins post-cured by microwaves. [USQ Project] (Unpublished)

Weston, Bill Thomas (2007) Design and trial of an alternative option for suburban sewerage pump stations. [USQ Project] (Unpublished)

Sullivan, T. (2007) Embedded control system for biogas digesters. [USQ Project] (Unpublished)

Chow, Kai Wen (2007) Implications for engineers aspiring to become top-senior managers. [USQ Project] (Unpublished)

Mitchell, Andrew (2007) On-line equipment condition monitoring based maintenance. [USQ Project] (Unpublished)

McKie, Scott (2007) Development of a portable high-wall lighting system. [USQ Project] (Unpublished)

Sharifian, Ahmad and Buttsworth, David R. (2007) Minimum safe standoff distance for protection from bushfire radiation by commercial metal meshes. In: 8th Australasian Heat and Mass Transfer Conference, 26-29 Jul 2005, Curtin University of Technology, Perth, Western Australia.

Sharifian, Ahmad and Watson, Stuart and Buttsworth, David R. and Barton, James (2007) Modelling the static thermal sensitivity of diaphragm-based fibre optic pressure sensors. In: 8th Australasian Heat and Mass Transfer Conference, 26-29 July 2005, Curtin University of Technology, Perth, Western Australia.

Churches, Alex and Green, Cliff and Field, Bruce and Wightley, Allan and Green, Lance and van de Loo, Paul and Burvill, Colin and Smith, Warren and Snook, Chris (2007) Creating tomorrow's engineering designers. In: ConnectED 2007: International Conference on Design Education, 9-12 July, 2007, Sydney, Australia.

Mai-Cao, L. and Tran-Cong, T. (2006) A meshless level-set scheme for interfacial flows. In: 2006 International Conference on Nonlinear Analysis & Engineering Mechanics Today, 11-14 Dec 2006, Ho Chi Minh City, Vietnam.

Golshani, Aliakbar and Tran-Cong, Thanh (2006) Modelling a borehole subjected to fluid pressure. In: 2006 International Conference on Nonlinear Analysis & Engineering Mechanics Today, 11-14 Dec 2006, Ho Chi Minh City, Vietnam.

Grassick, Bruce (2006) Design and construction of a solar collector for teaching purposes. [USQ Project] (Unpublished)

Nguyen-Van, Hieu and Khennane, Amar and Tran-Cong, Thanh (2006) Monte-Carlo simulation of the durability of glass fibre reinforced composite under environmental stress corrosion. In: 2006 International Conference on Nonlinear Analysis & Engineering Mechanics Today, 11-14 Dec 2006, Ho Chi Minh City, Vietnam.

Leong, Suet-Leong (2006) Managing product development process for time market. [USQ Project] (Unpublished)

Davey, Robert James (2006) Best percentage by weight of micro-spheres as fillers in phenolic resins, with fracture toughness as a benchmark. [USQ Project] (Unpublished)

Gurney, Richard Noel (2006) Best percentage weight of microspheres as fillers in resin using three-point bending test. [USQ Project] (Unpublished)

Armstead, Jared Kenneth (2006) Chassis development for the formula SAE racer. [USQ Project] (Unpublished)

Napper, Bryce (2006) Computational fluid dynamics (CFD) investigation of the thermal efficiency of micro climate conditioning of a typical workstation. [USQ Project] (Unpublished)

Inderbitzin, Martin David (2006) Design review and analysis of Collinsville power station coal handling plant. [USQ Project] (Unpublished)

Whittred, Daniel (2006) Developing a monitoring and control system for irrigation pumping units. [USQ Project] (Unpublished)

Chan, Wooi Lieh (2006) Fracture analysis of vinyl ester composites cured under microwave conditions. [USQ Project] (Unpublished)

Janusaitis, Stephen (2006) Impact response of flat and perforated plate. [USQ Project] (Unpublished)

Ler, Eng Loo (2006) Intelligent building automation system. [USQ Project] (Unpublished)

Geddes, Scott A. (2006) Internal model control (IMC) of a fruit drying system. [USQ Project] (Unpublished)

Rae, Andrew Stewart (2006) Performance and stability analysis of an AC variable speed drive. [USQ Project] (Unpublished)

Ang, Soon Lim (2006) Predicting the crushing stress of composite materials. [USQ Project] (Unpublished)

McCarthy, Alison (2006) Telemetry and communication systems for irrigation management. [USQ Project] (Unpublished)

Kruger, Scott (2006) The design and optimisation of a prototype sailplane. [USQ Project] (Unpublished)

Clarke, Daniel John (2006) The design of a three point linkage implement height control system. [USQ Project] (Unpublished)

Vella, Anthony (2006) Ventilation of highwall mining to control methane concentration at the Moura Mine. [USQ Project] (Unpublished)

He, Mingqian Belinda (2006) Analysis of the recycling method for aluminum soda cans. [USQ Project] (Unpublished)

Tuxford, Andrew (2006) Numerical analysis of a closed face impeller. [USQ Project] (Unpublished)

Freeman, Barry (2006) Steering system and suspension design for a formula SAE-A racer. [USQ Project] (Unpublished)

Gribble, Brett (2006) Stress relieving furnace modelling and analysis. [USQ Project] (Unpublished)

Hamid, H. A. and Yusaf, T. and Yusof, Z. M. (2006) An investigation on the improvement of the operation of Tenom Pangi HPP cooling power system. In: International Conference on Energy and Environment 2006 (ICEE 2006), 28-30 Aug 2006, Kajang, Malaysia.

Mossad, Ruth (2006) Numerical simulation to optimize the design of double glazed doors for closed refrigerated vertical display cabinets. In: 13th International Heat Transfer Conference IHTC-13, 13-18 Aug 2006, Sydney, Australia.

Billingsley, John (2006) Essentials of mechatronics. John Wiley & Sons, Inc., United States. ISBN 0-471-72341-X-

Wang, Xiaowei and Stone, C. Richard and Buttsworth, David R. and Stevens, Robert and Arita, Yoshi (2006) Finite element analysis of eroding type surface thermocouple with application to engine heat flux measurement. In: SAE 2006 World Conference and Exhibition, April 2006, Detroit, MI, USA.

Gambetta, Daniele Morco (2006) Sensorless technique for BLDC motors. [Thesis (_PhD/Research)] (Unpublished)

Hugo, Michael (2006) Automatic roller shell groover. [USQ Project] (Unpublished)

Massaro, Aaron (2006) The effect of water ratio on the mechanical properties of refactory materials. [USQ Project] (Unpublished)

Zakaria, S. and Yusaf, T. and Yusoff, M. Z. (2006) Flow and transient heat transfer in a high speed free piston tunnel: CFD simulations on turbulent and laminar flow conditions. In: 2nd International Conference on Thermal Engineering Theory and Applications (ICTEA '06), 3-6 Jan 2006, Al Ain, United Arab Emirates.

Wandel, Andrew P. and Klimenko, Alexander Y. (2005) Testing multiple mapping conditioning mixing for Monte Carlo probability density function simulations. Physics of Fluids, 17 (12). pp. 128105-1. ISSN 1070-6631

Abdalla, Fouad Kamel (2005) Modelling and assessment of an experimental combined evacuated-tubes-direct-flat-plate solar heater. In: 43rd Annual Conference of the Australian and New Zealand Solar Energy Society (Solar05), 28-30 Nov 2005, Dunedin, New Zealand.

Campbell, Nicholas (2005) Analysing the effect of speed variation on irrigation efficiency in travelling irrigators. [USQ Project] (Unpublished)

Janke, Scott (2005) Analysis of a sheet metal bucket elevator head. [USQ Project] (Unpublished)

Gravatt, Manu Richard (2005) Burdekin Falls Dam: investigation of the structural integrity of the outlet works radial gate and fixed wheel gate under emergency closure situations. [USQ Project] (Unpublished)

Chan, Teck Wai Alan (2005) Computational fluid dynamics (CFD): investigation for improving pigs' housing design. [USQ Project] (Unpublished)

Domrow, Ryan (2005) Development of a mechanical testing system to investigate road deformation. [USQ Project] (Unpublished)

Plank, Melinda (2005) Engine optimisation and performance characteristics for a formula SAE race car. [USQ Project] (Unpublished)

Yap, Lee Jiuan (2005) Evaluation of wet scrubber systems. [USQ Project] (Unpublished)

Ng, Hai Ching (2005) Investigation of tenable carbon monoxide and visibility level for a fired room. [USQ Project] (Unpublished)

Teo, Chin Teng (2005) Lifting mechanism of wheelchair. [USQ Project] (Unpublished)

Dyke, Geoffrey Wayne (2005) Optimising condenser air extraction to reduce greenhouse gas emissions at the Loy Yang B power station. [USQ Project] (Unpublished)

Chan, Lai Kuan (2005) Reduction of nitrogen oxides (NOx) using liquefied petroleum gas (LPG) in spark ignition (SI) engine. [USQ Project] (Unpublished)

Popa, Cristina Elena (2005) Steering system and suspension design for 2005 formula SAE-A car. [USQ Project] (Unpublished)

Field, Benjamin J. (2005) Stress analysis of axially loaded perforated steel plates by experimental and finite element methods. [USQ Project] (Unpublished)

French, Vivienne Joyce (2005) The investigation into modes of failure of total hip replacements. [USQ Project] (Unpublished)

Mai-Duy, N. and Tanner, R. I. (2005) Computing non-Newtonian fluid flow with radial basis function networks. International Journal for Numerical Methods in Fluids, 48 (12). pp. 1309-1336. ISSN 0271-2091

Mai-Duy, Nam and Tran-Cong, Thanh (2005) An efficient indirect RBFN-based method for numerical solution of PDEs. Numerical Methods for Partial Differential Equations, 21 (4). pp. 770-790. ISSN 0749-159X

Eagle, Michael Allan (2005) Numerical investigation of the thermal efficiency of glass refrigeration doors. [USQ Project] (Unpublished)

Yan, Wenyi (2005) Mechanics examination on the wear behaviour of shape memory alloys. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005): Advances in Applied Mechanics, 16-18 Feb 2005, Melbourne, Australia.

Wong, Teck Shim (2005) Jigs for checking machine alignment. [USQ Project] (Unpublished)

Lim, Chun Hao (2005) Replacement of chiller system of a terminal building. [USQ Project] (Unpublished)

Chia, Wee Chong (2005) Research and development of multi purpose carbide end mill. [USQ Project] (Unpublished)

Douglas, Adrian Keith (2005) Mechanical design aspects of a lightweight neonatal retrieval system. [Thesis (_PhD/Research)] (Unpublished)

Hewitt, Andrew (2005) The effects of curvature on axial flux machine cores. [Thesis (_PhD/Research)] (Unpublished)

Silva, Alan Grant Lance (2004) The development of a new multi-directional fall arrest device. [USQ Project] (Unpublished)

Mai-Duy, Nam and Tran-Cong, Thanh (2004) An effective RBFN-boundary integral approach for the analysis of natural convection flow. International Journal for Numerical Methods in Fluids, 46 (5). pp. 545-568. ISSN 0271-2091

Clarke, Timothy Lewis (2004) An autonomous bird deterrent system. [USQ Project] (Unpublished)

Cheah, Siew Lee (2004) Analysis of engine performance using palm oil methyl ester. [USQ Project] (Unpublished)

Taylor, Brett C. (2004) Assessment of appropriate pressure vessel flange bolt tension by finite element modelling. [USQ Project] (Unpublished)

Hockings, Peter (2004) Fast-response piezoresistive pressure transducers for thermofluids experiments. [USQ Project] (Unpublished)

Roache, Brody (2004) Heat transfer measurements of a re-entry capsule using fast response thermocouples. [USQ Project] (Unpublished)

Stansbie, Clayton Harley (2004) Natural gas burner for copper smelter converter. [USQ Project] (Unpublished)

Faulkner, Griffith (2004) Numerical investigation into the aeration of grain silos. [USQ Project] (Unpublished)

Ruhle, Andrew John Alexander (2004) Redesign and analysis of Janke Bros. F500P parallelogram planting unit. [USQ Project] (Unpublished)

Lim, Pei Li (2004) The effect of compression ratio on the CNG-diesel engine. [USQ Project] (Unpublished)

Goodger, Anthony Maldon (2004) The formation of nitrogen oxides in a pulverised coal boiler. [USQ Project] (Unpublished)

Sercombe, David B. (2004) Transverse injection from a hypersonic cone. [USQ Project] (Unpublished)

Kamel, Fouad (2003) Cost per kWh produced and payback time of a PV -solar -thermal -combined roof top collector at different locations in New Zealand. In: 41st Annual Conference of the Australian and New Zealand Solar Energy Society (Solar03), 25 Nov - 2 Dec 2003, Melbourne, Australia.

Buttsworth, David R. and Jones, Terry V. (2003) High bandwidth stagnation temperature measurements in a Mach 6 gun tunnel flow. Experimental Thermal and Fluid Science, 27 (2). pp. 177-186. ISSN 0894-1777

McCarthy, Stuart George (2003) The integration of sensory control for sugar cane harvesters. [Thesis (_PhD/Research)] (Unpublished)

Schultz, Bradley Jason (2003) The mechatronic bakery. [Thesis (_PhD/Research)] (Unpublished)

Kamel, Fouad (2002) Optimum operating temperature for evacuated tube solar collectors. In: 40th Annual Conference of the Australian and New Zealand Solar Energy Society (Solar02): Solar Harvest, 25 Nov - 2 Dec 2002, Newcastle, Australia.

Cox, Graeme J. (2002) A yield mapping system for sugar cane chopper harvesters. [Thesis (_PhD/Research)] (Unpublished)

Buttsworth, David R. (2002) Transient response of an erodable heat flux gauge using finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216 (8). pp. 701-716. ISSN 0954-4070

Buttsworth, David R. (2002) Heat transfer during transient compression: measurements and simulations. Shock Waves, 12 (1). pp. 87-91. ISSN 0938-1287

Kamel, Fouad and Wilson, Paul (2002) Cost of kWh produced and payback time of a pv-solar-thermal-combined rooftop collector at different locations in New Zealand. In: EEA Annual Conference & Trade Exhibition 2002: Meeting the Challenges of Growth, 21-22 June 2002, Christchurch, New Zealand.

Roy, R. Valery and Roberts, A. J. and Simpson, M. E. (2002) A lubrication model of coating flows over a curved substrate in space. Journal of Fluid Mechanics, 454 (1). pp. 235-261. ISSN 0022-1120

Phythian, Mark W. (2002) Autonomous agricultural robot. In: Bradbeer, Robin and Billingsley, John, (eds.) Mechatronics and machine vision 2002: current practice. Research Studies Press, Baldock, Hertfordshire, England, pp. 237-244. ISBN 0863802788

McCarthy, Stuart George and Billingsley, John and Harris, Harry (2002) Control of the sugar cane harvester topper. In: Bradbeer, Robin and Billingsley, John, (eds.) Mechatronics and machine vision 2002: current practice. Research Studies Press, Baldock, Hertfordshire, England, pp. 253-259. ISBN 0863802788

Plaza, Floran (2002) Measuring, modelling and understanding the mechanical behaviour of bagasse. [Thesis (_PhD/Research)] (Unpublished)

Bradbeer, Robin and Billingsley, John, eds. (2002) Mechatronics and machine vision 2002: current practice. Robotics and Mechatronics Series, 4 . Research Studies Press, Baldock, Hertfordshire, England. ISBN 0863802788; 9780863802782

Billingsley, John (2002) The counting of macadamia nuts. In: Bradbeer, Robin and Billingsley, John, (eds.) Mechatronics and machine vision 2002: current practice. Research Studies Press, Baldock, Hertfordshire, England, pp. 221-228. ISBN 0863802788

Buttsworth, David R. (2001) Assessment of effective thermal product of surface junction thermocouples on millisecond and microsecond time scales. Experimental Thermal and Fluid Science, 25 (6). pp. 409-420. ISSN 0894-1777

Kamel, Fouad and Wilson, Paul (2001) Assessment of domestic evacuated tube direct solar water heater. In: 2001 Solar World Congress (ISES 2001), 25 Nov – 2 Dec 2001, Adelaide, Australia.

Strunin, Dmitry V. (2001) Transition to self-similarity of diffusion of tracer in turbulent patch. Journal of Engineering Mechanics, 127 (11). pp. 1089-1095. ISSN 0733-9399

Mai-Duy, Nam and Tran-Cong, Thanh (2001) Numerical solution of Navier-Stokes equations using multiquadric radial basis function networks. International Journal for Numerical Methods in Fluids, 37 (1). pp. 65-86. ISSN 0271-2091

Strunin, Dmitry V. (2001) On characteristic times in generalized thermoelasticity. Journal of Applied Mechanics, 68 (5). pp. 816-817. ISSN 0021-8936

Strunin, Dmitry V. and Melnik, Roderick V. N. and Roberts, A. J. (2001) Coupled thermomechanical waves in hyperbolic thermoelasticity. Journal of Thermal Stresses, 24 (2). pp. 121-140. ISSN 0149-5739

Yusaf, Talal and Yusoff, Mohammed Zamri (2000) Development of a 3D CFD model to investigate the effect of the mixing quality on the CNG-diesel engine performance. In: The International Conference and Exhibition and Natural Gas Vehicles, 17-19 Oct 2000, Yokohama, Japan.

Lehane, Pat and Toleman, Mark and Benecke, John (1999) Applying ecological interface design to experimental apparatus used to monitor a refrigeration plant. In: 1st Australasian User Interface Conference (AUIC 2000), 31 Jan - 3 Feb 2000, Canberra, Australia.

Kamel, Fouad (1989) A design factor for photovoltaic power stations. In: 9th European Communities Photovoltaic Solar Energy Conference, 25-29 Sept 1989, Freiburg, Germany.