Browse by Department

2013

Etaati, A. and Wang, H. and Pather, S. and Yan, Z. and Abdanan Mehdizadeh, S. (2013) 3D X-ray microtomography study on fibre breakage in noil hemp fibre reinforced polypropylene composites. Composites Part B: Engineering, 50 . pp. 239-246. ISSN 1359-8368

Etaati, Amir and Dehghani, Kamran (2013) A study on hot deformation behavior of Ni-42.5Ti-7.5Cu alloy. Materials Chemistry and Physics, 140 (1). pp. 208-215. ISSN 0254-0584

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. and Followell, D. and Birt, P. (2013) Use of fixed wavelength Fibre-Bragg Grating (FBG) filters to capture time domain data from the distorted spectrum of an embedded FBG sensor to estimate strain with an artificial neural network. Sensors and Actuators A: Physical, 194 . pp. 1-7. ISSN 0924-4247

Al-lwayzy, Saddam H. and Yusaf, Talal (2013) Chlorella protothecoides microalgae as an alternative fuel for tractor diesel engines. Energies, 6 (2). pp. 766-783.

Wandel, Andrew P. (2013) Extinction predictors in turbulent sprays. Proceedings of the Combustion Institute, 34 (1). pp. 1625-1632. ISSN 1540-7489

Wandel, Andrew P. and Lindstedt, R. Peter (2013) Hybrid multiple mapping conditioning modeling of local extinction. Proceedings of the Combustion Institute, 34 (1). pp. 1365-1372. ISSN 1540-7489

Etaati, Amir and Dehghani, Kamran and Ebrahimi, G. R. and Wang, Hao (2013) Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations. Metals and Materials International, 19 (1). pp. 5-9. ISSN 1598-9623

Alsaeed, T. and Yousif, B. F. and Ku, H. (2013) The potential of using date palm fibres as reinforcement for polymeric composites. Materials and Design, 43 . pp. 177-184. ISSN 0264-1275

Francucci, Gaston and Cardona, Francisco and Manthey, Nathan W. (2013) Cure kinetics of an acrylated epoxidized hemp oil-based bioresin system. Journal of Applied Polymer Science, 128 (3). pp. 2030-2037. ISSN 0021-8995

Mossad, Ruth and AL-Khaffajy, Marwan (2013) Investigating two configurations of a heat exchanger in an Indirect Heating Integrated Collector Storage Solar Water Heating System. Journal of Energy and Power Engineering, 7 . pp. 66-73. ISSN 1934-8975

Hafizi, Zohari Mohd and Epaarachchi, Jayantha Ananda and Lau, K. T. (2013) Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test. In: Chiu, W. K. and Galea, S. C., (eds.) Structural health monitoring: research and applications. Key Engineering Materials (558). Trans Tech Publications Inc., Zurich, Switzerland , pp. 65-75. ISBN 978-3-03785-715-1

Mossad, Ruth and Aral, Hal (2013) Numerical prediction of the performance of horizontal sand filters as the pitch of the spiral protrusion changes. Water Science and Technology, 67 (10). pp. 2249-2256. ISSN 0273-1223

Li, Qiang and Wang, Hao and Zhang, Zuhua and Reid, Andrew (2013) Numerical simulation of porosity on thermal properties and fire resistance of foamed concrete. Journal of Sustainable Cement-Based Materials . pp. 1-7. ISSN 2165-0373 (In Press)

Kahandawa, Gayan C. and Epaarachchi, Jayantha A.. and Wang, Hao and Lau, K. T. (2013) Prediction of obsolete FBG sensor using ANN for efficient and robust operation of SHM systems. In: Chiu, W. K. and Galea, S. C., (eds.) Structural health monitoring: research and applications. Key Engineering Materials (558). Trans Tech Publications Inc., Zurich, Switzerland , pp. 546-553. ISBN 978-3-03785-715-1

Nirmal, Umar and Hashim, Jamil and Rilling, Dirk and Brevern, P. V. and Yousif, B. F. (2013) Tribo performance of T-BFRP composite subjected to dry/wet contact conditions. In: Thomas, Sabu and Ninan, Neethu and Mohan, Sneha and Francis, Elizabeth, (eds.) Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Advances in Materials Science (2). Apple Academic Press, Toronto, Canada, pp. 311-326. ISBN 978-1-926895-16-1

2012

Thota, Narasimha Murthy and Eepaarachchi, Jayantha A. and Lau, K. T. (2012) Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study. In: 7th Australasian Congress on Applied Mechanics (ACAM 7), 9-12 Dec 2012, Adelaide, Australia.

Sharifian, Ahmad and Hashempour, Javad (2012) Dilution of toxic gases and smoke emissions from residential chimneys using a low-cost cap. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Karimkashi, Shervin and Kermani, Mohammad J. and Sharifian, Ahmad and Hashempour, Javad (2012) Numerical computation of pressure drop across an off supplementary firing burner in heat recovery steam generator. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Al-Faruk, A. and Sharifian, S. A. and Al-Atresh, S. (2012) Numerical investigation of performance of a new type of savonius turbine. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Al-Atresh, R. S. and Sharifian, S. A. and Al-Faruk, A. (2012) The effect of inlet velocity and temperature on the strength of the swirling induced by a spilt channel: a CFD approach. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2012) A review of mild combustion and open furnace design consideration. International Journal of Automotive and Mechanical Engineering, 6 (1). pp. 730-754. ISSN 2229-8649

Yousif, B. F. and Orupabo, C. and Azwa, Z. N. (2012) Characteristics of kenaf fibre immersed in different solutions. Journal of Natural Fibers, 9 (4). pp. 207-218. ISSN 1544-0478

Kahandawa, G. C. and Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) Detecting delamination in a composite structure using an embedded FBG – AE hybrid system. In: 7th Australasian Congress on Applied Mechanics (ACAM 7), 9-12 Dec 2012, Adelaide, Australia.

Yang, Tao and Yao, Xiao and Zhang, Zuhua and Wang, Hao (2012) Mechanical property and structure of alkali-activated fly ash and slag blends. Journal of Sustainable Cement-Based Materials, 1 (4). pp. 167-178. ISSN 2165-0373

Zhang, Zuhua and Wang, Hao and Provis, John L. (2012) Quantitative study of the reactivity of fly ash in geopolymerization by FTIR. Journal of Sustainable Cement-Based Materials, 1 (4). pp. 154-166. ISSN 2165-0373

Ghude, Sarang and Billingsley, John (2012) Iterative fast model control strategy with state constraints: an example of aircraft lateral control. In: 19th International Conference on Mechatronics and Machine Vision in Practice (M2VIP 2012), 28-30 Nov 2012, Auckland, New Zealand.

Wardana, I. N. G. (2012) Burning characteristics of coconut oil In micro-combustor. In: USQ Combustion Meeting, 26 Nov 2012, Toowoomba, Australia.

Wardana, I. N. G. (2012) Premixed combustion of coconut oil in a hele-shaw shell. In: USQ Combustion Meeting, 26 Nov 2012, Toowoomba, Australia.

Al-Sandooq, J. M. and Yousif, B. F. and Jensen, T. A. (2012) Tribological consideration in roller mill machines for agriculture applications. Surface Review and Letters, 19 (6). pp. 1250065-1. ISSN 0218-625X

Yusaf, T. F. and Ahmed Al-Juboori, Raed (2012) Investigating the efficiency of ultrasound for controlling bio-fouling in batch membrane systems. In: USQ Combustion Meeting, 21 Nov 2012, Toowoomba, Australia. (Unpublished)

Yusaf, T. F. and Al-lwayzy, Saddam H. (2012) The use of microalgae biodiesel in diesel engine: production, extraction and engine performance. In: USQ Combustion Meeting, 21 Nov 2012, Toowoomba, Australia. (Unpublished)

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2012) Development of smart wind turbine blades. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8) :Composites: Enabling Tomorrow’s Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. and Lau, K. T. (2012) Optimized FBG sensor network for efficient detection of a delamination in FRP structures. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Thai-Quang, N. and Le-Cao, K. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2012) A high-order compact integrated-RBF scheme for time-dependent problems. In: 4th International Conference on Computational Methods (ICCM 2012), 25-28 Nov 2012, Gold Coast, Australia.

Mai-Cao, L. and Tran-Cong, T. (2012) A new IRBFN scheme for the numerical simulation of interfacial flows. In: 4th International Conference on Computational Methods (ICCM 2012), 25-28 Nov 2012, Gold Coast, Australia.

Hafizi , Z. M. and Epaarachchi, J. and Lau, K. T. (2012) An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8) :Composites: Enabling Tomorrow’s Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Hoang-Trieu, T.-T. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2012) Compact local integrated RBF stencil based on finite volume formulation for second-order differential problems. In: 4th International Conference on Computational Methods (ICCM 2012), 25-28 Nov 2012, Gold Coast, Australia.

Pham-Sy, N. and Hoang-Trieu, T.-T. and Tran, C.-D. and Mai-Duy, N. and Tran-Cong, T. (2012) Development of parallel algorithm for boundary value problems using compact local integrated RBFN and domain decomposition. In: 4th International Conference on Computational Methods (ICCM 2012), 25-28 Nov 2012, Gold Coast, Australia.

Yang, T. and Yao, X. and Zhang, Z. and Wang, H. (2012) Effects of ground granulated blast furnace slag on the mechanical and microstructure of fly ash-based geopolymer binders. In: 8th Asian-Australasian Conference on Composite Materials, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Yan, Z. L. and Wang, H. and Lau, K. T. and Zhang, J. C. and Zhang, H. and Ding, Y. (2012) Fabrication process optimization of hemp fibre reinforced polypropylene composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Li, Qiang and Wang, Hao and Bullen, Frank and Reid, Andrew (2012) Numerical simulation of porous structure in foam concrete on thermal insulation property. In: 8th Asian-Australasian Conference on Composite Materials, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Zhang, Z. and Wang, H. and Provis, J. L. (2012) The reactivity of fly ash in geopolymer synthesis: a qualification study by FTIR. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Brookshaw, Iain J. and Low, Tobias (2012) Monocular vision, optical blur and visual looming as a basis for mobile robot obstacle avoidance. In: 16th International Conference on Mechatronics Technology (ICMT 2012): Advanced Mechatronics, Precision Measurement and NanoManufacturing, 16-19 Oct 2012, Tianjin, China.

Billingsley, John (2012) The place of mechatronics within the faculty structure – a personal view. In: 16th International Conference on Mechatronics Technology: Advanced Mechatronics, Precision Measurement and NanoManufacturing (ICMT 2012), 16-19 Oct 2012, Tianjing, China.

Al-lwayzy, Saddam H. (2012) Alternative fuels from microalgae for diesel engine. In: USQ Combustion Meeting, 10 Oct 2012, Toowoomba, Australia. (Unpublished)

Goh, Steven and Zhou, Hong and Bullen, Frank and Davey, Kenneth (2012) An assessment of stress factors on engineering academics in a regional context. In: 42nd ASEE/IEEE Frontiers in Education Conference (FIE 2012): Soaring to New Heights in Engineering Education, 3-6 Oct 2012, Seattle, WA. United States.

Jesshope, Douglas James (2012) Development of an electronically controlled thruster. [USQ Project] (Unpublished)

Thompson, Simon (2012) Numerical modelling of Big Tyres patented non-pneumatic wheel concept. [USQ Project] (Unpublished)

du Preez, Matthew (2012) Simulation of monolayer distribution for use in evaporation reduction. [USQ Project] (Unpublished)

Bates, Matthew (2012) The selection of inegrated and sustainable waste processing techniques for application within Indonesia. [USQ Project] (Unpublished)

Hairuddin, A. Aziz and Yusaf, Talal F. and Wandel, Andrew P. (2012) HCCI engine: numerical and experimental approach. In: USQ Combustion Meeting, 26 Sep 2012, Toowoomba, Australia. (Unpublished)

Noor, M. M. and Hairuddin, A. Aziz and Wandel, Andrew P. and Yusaf, T. F. (2012) Modelling of non-premixed turbulent combustion of hydrogen using conditional moment closure method. IOP Conference Series: Materials Science and Engineering, 36 (012036). pp. 1-17. ISSN 1757-899X

Al-Juboori, Raed A. and Yusaf, Talal (2012) Biofouling in RO system: mechanisms, monitoring and controlling. Desalination, 302 . pp. 1-23. ISSN 0011-9164

Yousif, B. F. and Chin, C. W. (2012) Epoxy composite based on kenaf fibers for tribological applications under wet contact conditions. Surface Review and Letters, 19 (5). pp. 1250050-1. ISSN 0218-625X

Al Faruk, Abdullah and Sharifian, Ahmad (2012) Angular velocity of a combined unloaded Savonius turbine with a vortex inducing chamber: a CFD approach. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) Numerical investigation of influence of air and fuel dilution for open furnace MILD combustion burner. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Hashempour, Javad and Sharifian, Ahmad (2012) Potentials of metal mesh to contain bushfires. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) The study of air fuel ratio for open furnace MILD combustion of biogas on bluff-body burner. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Tran, Canh-Dung and Mai-Duy, Nam and Tran-Cong, Thanh (2012) Computation of a Fokker-Planck-equation-based multi-scale model for complex flows using the IRBFN method. In: 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), 10-14 Sep 2012, Vienna, Austria.

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru (2012) Cure kinetic study of epoxidized hemp oil cured with a multiple catalytic system. Journal of Applied Polymer Science, 125 (S2). E511-E517. ISSN 0021-8995

Yousif, B. F. and Shalwan, A. and Chin, C. W. and Ming, K. C. (2012) Flexural properties of treated and untreated kenaf/epoxy composites. Materials and Design, 40 . pp. 378-385. ISSN 0264-1275

Kahandawa, Gayan C. and Epaarachchi, Jayantha and Wang, Hao and Lau, K. T. (2012) Use of FBG sensors for SHM in aerospace structures. Photonic Sensors, 2 (3). pp. 203-214. ISSN 1674-9251

Ku, H. and Fulcher, R. (2012) Using computer software packages to enhance the teaching in engineering management science: part 3 - simulation. Computer Applications in Engineering Education, 20 (3). pp. 547-552. ISSN 1099-0542

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) Investigation of Biogas Moderate or Intense Low Oxygen Dilution (MILD) combustion on open furnace bluff-body burner. In: USQ Combustion Meeting, 29 Aug 2012, Toowoomba, Australia. (Unpublished)

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) A preliminary study of control parameters for open furnace mild combustion using CFD. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) Mild combustion: a technical review towards open furnace combustion. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) Modal analysis of high frequency acoustic signal approach for progressive failure monitoring in thin composite plates. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Noor, M. M. and Rahman, M. M. and Ismail, J., eds. (2012) Proceedings of the 2nd Malaysian Posgraduate Conference (MPC 2012). Education Malaysia, Sydney (EMAS), Gold Coast, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) The modelling of the effect of air fuel ratio on unburned hydrocarbons for MILD combustion. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Albdiry, Mushtaq and Alethari, Haydar (2012) Effect of alumina inclusions on microstructure and mechanical properties of 62 WC, 32 (Ti-W) C and 6 Co compacts. International Journal of Microstructure and Materials Properties, 7 (4). pp. 329-340. ISSN 1741-8410

Sharifian, Ahmad (2012) The effect of direction of low speed winds on the performance of a split chimney. In: 23rd International Congress of Theoretical and Applied Mechanics (ICTAM 2012), 19-24 Aug2012, Beijing, China.

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2012) Design of smart structures for wind turbine blades. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Dehkhoda, Sevda and Hood, Michael and Alehossein, Habib and Buttsworth, David (2012) Analytical and experimental study of pressure dynamics in a pulsed water jet device. Flow, Turbulence and Combustion, 89 (1). pp. 97-119. ISSN 1386-6184

Nirmal, Umar and Hashim, Jamil and Lau, Saijod T. W. and Yuhazri, M. Y. and Yousif, B. F. (2012) Betelnut fibres as an alternative to glass fibres to reinforce thermoset composites: a comparative study. Textile Research Journal, 82 (11). pp. 1107-1120. ISSN 0040-5175

Zhang, Zuhua and Wang, Hao and Provis, John L. and Bullen, Frank and Reid, Andrew and Zhu, Yingcan (2012) Quantitative kinetic and structural analysis of geopolymers, Part 1. The activation of metakaolin with sodium hydroxide. Thermochimica Acta, 539 . pp. 23-33. ISSN 0040-6031

Widodo, Agung Sugeng (2012) Temperature variations in a free piston compression wind tunnel. [Thesis (_PhD/Research)] (Unpublished)

Mo, Chun-li and Li, Qiang and Guo, Xu-ming and Wang, Hao (2012) Numerical simulation the temperature field of the multi-coil batch during annealing process in Bell-type furnace. Advanced Materials Research, 538-541 . pp. 637-641. ISSN 1022-6680

Zhang, Z. and Wang, H. and Yao, X. and Zhu, Y. (2012) Effects of halloysite in kaolin on the formation and properties of geopolymers. Cement and Concrete Composites, 34 (5). pp. 709-715. ISSN 0958-9465

Goh, Steven and Coaker, Warren and Bullen, Frank (2012) How engineers become CEOs. In: Engineering Leadership Conference (ELC 2012): Passing the Baton - Engineering Australia's Future, 30 May-2 Jun 2012, Adelaide, Australia.

Goh, Steven and Baker, Nelson (2012) Need for a global accord for the postgraduate learning of engineers. In: 13th IACEE World Conference on Continuing Engineering Education (WCCEE 2012), 17-19 May 2012, Valencia, Spain.

Buttsworth, David and Jacobs, Peter and Potter, Daniel and Mudford, Neil and D'Souza, Mary and Eichmann, Troy and Jenniskens, Peter and McIntyre, Tim and Jokic, Michael and Jacobs, Carolyn and Upcroft, Ben and Khan, Razmi and Porat, Hadas and Neely, Andrew and Lohle, Stefan (2012) Super-orbital re-entry in Australia: laboratory measurement, simulation and flight observation [Keynote lecture]. In: ISSW28: 28th International Symposium on Shock Waves, 17-22 Jul 2011, Manchester, United Kingdom.

Mossad, R. and AL-Khaffajy, M. (2012) Investigating two configurations of a heat exchanger in an Indirect Heating Integrated Collector Storage Solar Water Heating System (IHICSSWHS). Renewable Energy and Power Quality Journal (10). pp. 1-6. ISSN 2172-038X

Goh, Steven and Worden, John and Zhou, Hong and Clewett, John (2012) Growing pains in the revitalisation of a 2nd level engineering and spatial science PBL course. In: Rasul, Mohammad, (ed.) Developments in engineering education standards: advanced curriculum innovations. IGI Global, Hershey, PA. United States , pp. 105-126. ISBN 978-1-4666-0951-8

Yousif, B. F. and Ku, H. (2012) Suitability of using coir fiber/polymeric composite for the design of liquid storage tanks. Materials and Design, 36 . pp. 847-853. ISSN 0264-1275

Sharifian, Ahmad (2012) The effect of wind speed on the performance of a split chimney. In: 2012 International Conference on Fluid Dynamics and Thermodynamics Technologies (FDTT 2012), 17-18 March 2012, Singapore.

Al-Atresh, Safia and Sharifian, Ahmad and Kueger, Bradley (2012) Using a split chimney for dilution of exhaust pollution: a CFD approach. In: 2012 International Conference on Fluid Dynamics and Thermodynamics Technologies (FDTT 2012), 17-18 March 2012, Singapore.

Ho, Mei-po and Lau, Kin-tak (2012) Design of an impact resistant glass fibre/epoxy composites using short silk fibres. Materials and Design, 35 (1). pp. 664-669. ISSN 0261-3069

Wong, Kwok Yeung Peter (2012) Measurement of mechanical, electrical and thermal properties of glass powder reinforced epoxy composites and modelling. [Thesis (_PhD/Research)] (Unpublished)

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. and Aravinthan, T. (2012) Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites. Composites Part B: Engineering, 43 (2). pp. 159-169. ISSN 1359-8368

Ku, H. and Fulcher, R. (2012) Using computer software packages to enhance the teaching in engineering management science: part 2 - programming techniques. Computer Applications in Engineering Education, 20 ( 1). pp. 114-123. ISSN 1099-0542

Tran, Canh-Dung and Tran-Cong, Thanh and Le-Cao, K. and Ho-Minh, D. (2012) Processing the CNTs' interaction in web using an electro-static field based process. In: 2012 International Conference on Nanoscience and Nanotechnology (ICONN 2012), 5-9 Feb 2012, Perth, Australia .

Al-Juboori, Raed A. and Yusaf, Talal and Aravinthan, Vasanthadevi (2012) Investigating the efficiency of thermosonication for controlling biofouling in batch membrane systems. Desalination, 286 . pp. 349-357. ISSN 0011-9164

Amir, Al-Falahi and Yusoff, M. Z. and Yusaf, Talal and Ahmed, Diyar I. (2012) Numerical investigation of flow instability in shock tube due to shock wave-contact surface interactions. International Journal of Numerical Methods for Heat and Fluid Flow, 22 (3). pp. 377-398. ISSN 0961-5539

Lostroh, Tristan (2012) Investigation into the strength of Lego Technic liftarms and brick beams, and of liftarm pin connections. Project Report. Unpublished, Toowoomba. (Unpublished)

Islam, Md Mainul and Kim, Ho Sung (2012) Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior. Journal of Sandwich Structures and Materials, 14 (1). pp. 111-127. ISSN 1099-6362

Tran, C.-D. and Mai-Duy, N. and Le-Cao, K. and Tran-Cong, T. (2012) A continuum-microscopic method based on IRBFs and control volume scheme for viscoelastic fluid flows. CMES: Computer Modeling in Engineering and Sciences, 85 (6). pp. 499-519. ISSN 1526-1492

Albdiry, M. T. and Yousif, B. F. and Ku, H. and Lau, K. T. (2012) A critical review on the manufacturing processes in relation to the properties of nanoclay/polymer composites. Journal of Composite Materials . ISSN 0021-9983 (In Press)

Thai-Quang, N. and Le-Cao, K. and Mai-Duy, N. and Tran-Cong, T. (2012) A high-order compact local integrated-RBF scheme for steady-state incompressible viscous flows in the primitive variables. CMES: Computer Modeling in Engineering and Sciences, 84 (6). pp. 528-557. ISSN 1526-1492

Goh, Steven Chingnam (2012) A qualitative study into the innovation and technology transfer process of a micro-manufacturer within a university-industry collaboration context in regional South-East Queensland. [Thesis (_PhD/Research)] (Unpublished)

Kiani, Mostafa Kiani Deh and Ghobadian, Barat and Ommi, Fathollah and Najafi, Gholamhassan and Yusaf, Talal (2012) Artificial neural networks approach for the prediction of thermal balance of SI engine using ethanol-gasoline blends. In: 2012 International Cross-Domain Conference and Workshop on Availability, Reliability, and Security (CD-ARES 2012), 20-24 Aug 2012, Prague, Czech Republic.

Lau, Mei-ling and Lau, Kin-tak and Ku, Harry and Bahattacharyya, Debes and Lee, Joong-Hee (2012) Assessing heat-treatment effects on bovine cortical bones by nanoindentation. In: PFAM 20: 20th International Symposium on Processing and Fabrication of Advanced Materials , 15-18 Dec 2011, Hong Kong.

Kabir, Mohammad Mazedul and Wang, Hao and Lau, Alan and Cardona, Francisco and Aravinthan, Thiru (2012) Compressive properties of chemically-treated hemp fibre reinforced composites. In: Composites Australia and CRC-ACS, 2012 Conference: Diversity in Composite, 15-16 Mar 2012, Leura, Australia.

Ho, Mei-po and Wang, Hao and Lee, Joong-Hee and Ho, Chun-kit and Lau, Kin-tak and Leng, Jinsong and Hui, David (2012) Critical factors on manufacturing processes of natural fibre composites. Composites Part B: Engineering, 43 (8). pp. 3549-3562. ISSN 1359-8368

Yousif, B. F. (2012) Design of newly fabricated tribological machine for wear and frictional experiments under dry/wet condition. Materials and Design . ISSN 0261-3069 (In Press)

Ho, Mei-po and Wang, Hao and Lau, Kin-tak (2012) Effect of degumming time on silkworm silk fibre for biodegradable polymer composites. Applied Surface Science, 258 (8). pp. 3948-3955. ISSN 0169-4332

Al-lwayzy, Saddam H. and Yusaf, Talal and Jensen, Troy (2012) Evaluating tractor performance and exhaust gas emissions using biodiesel from cotton seed oil. IOP Conference Series: Materials Science and Engineering, 36 (1). pp. 442-452. ISSN 1757-899X

Ku, H. and Wong, P. and Huang, J. and Fung, H. and Trada, M. (2012) Flexural properties of epoxy composites filled with glass powder: preliminary results. Advanced Material Research, 410 . pp. 309-312. ISSN 1022-6680

Thai-Quang, N. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2012) High-order alternating direction implicit method based on compact integrated-RBF approximations for unsteady/steady convection-diffusion equations. CMES: Computer Modeling in Engineering and Sciences, 89 (3). pp. 189-220. ISSN 1526-1492

Al-Juboori, R. A. and Yusaf, T. F. (2012) Improving the performance of ultrasonic horn reactor for deactivating microorganisms in water. IOP Conference Series: Materials Science and Engineering, 36 (012037). ISSN 1757-899X

Lau, Mei-Ling and Lau, Kin-Tak and Ku, Harry and Bahattacharyya, Debes and Yao, Yan-Dong (2012) Measurements of heat treatment effects on bovine cortical bones by nanoindentation and compression testing. Journal of Biomaterials and Nanobiotechnology, 3 (1). pp. 105-113. ISSN 2158-7027

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2012) Mechanical properties characterization of the skin and core of a novel composite sandwich structure. Journal of Composite Materials . ISSN 0021-9983 (In Press)

Ho, M. P. and Wang, H. and Lau, K. T. and Jayaraman, K. and Bhattacharyya, D. (2012) Mechanical properties of a bamboo charcoal reinforced polylactic acid composite. In: 8th Asian-Australasian Conference on Composite Materials: Enabling Tomorrow's Industry Toda (ACCM 8), 6-8 Nov 2012, Kuala Lumpur, Malaysia.

An-Vo, D.-A and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2012) Modeling strain localisation in a segmented bar by a C2-continuous two-node integrated-RBF element formulation. In: 34th International Conference on Boundary Elements and other Mesh Reduction Methods (BEM/MRM 2012), 25-27 June 2012, Split, Croatia.

Ku, H. and Zhou, Hong and Wong, Peter and Su, Gang and Vadher, Jayent (2012) Modeling the flexural properties of SLG reinforced phenol formaldehyde composites using Langrage’s Method. Advanced Materials Research, 410 . pp. 305-308. ISSN 1022-6680

Buttsworth, David and Jacobs, P. and Morgan, R. G. and Jenniskens, Peter (2012) Near ultraviolet emission spectroscopy of the Hayabusa re-entry. In: 50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition (AIAA 2012): Advancing the Science of Flight Technology, 9-12 Jan 2012, Nashville, TN. United States.

Hafizi, Z. M. and Epaarachchi, J. and Nizwan, C. K. E. and Lau, K. T. (2012) Non-velocity based analysis of passive ultrasonic signal for source lLocation detection in composite plates: a pilot study. IOP Conference Series: Materials Science and Engineering, 36 (1). ISSN 1757-8981

Al-Khaffajy, Marwaan Awad Hamad (2012) Numerical evaluation of the performance of an indirect heating integrated collector storage solar water heating system. [Thesis (_PhD/Research)] (Unpublished)

Tran, C.-D. and Mai-Duy, N. and Tran-Cong, T. (2012) Numerical solution of Fokker-Planck equation using the integral radial basis function networks. In: 10th World Congress on Computational Mechanics (WCCM 2012), 8-13 July 2012, Sao Paulo, Brazil.

An-Vo, D.-A. and Tran, C.-D. and Mai-Duy, N. and Tran-Cong, T. (2012) RBF-based multiscale control volume method for second order elliptic problems with oscillatory coefficients. CMES: Computer Modeling in Engineering and Sciences, 89 (4). pp. 303-359. ISSN 1526-1492

Ku, Harry S. (2012) Review on using packages to enhance the teaching of critical path networks. In: 2012 International MultiConference of Engineers and Computer Scientists (IMECS 2012), 14-16 Mar 2012, Hong Kong, China.

Xie, Shuisheng and Li, Xinggang and Wang, Hao and Zhang, Ying (2012) Semisolid processing technology. Metallurgical Industry Press, Beijing, China. ISBN 978-7-5024-5935-2

Hoang-Trieu, T. -T and Mai-Duy, N. and Tran-Cong, T. (2012) Several compact local stencils based on integrated RBFs for fourth-order ODEs and PDEs. CMES: Computer Modeling in Engineering and Sciences, 84 (2). pp. 171-203. ISSN 1526-1492

Tarawneh, Mou’ad A. and Ahmad, Sahrim Hj. and EhNoum, SeYong and Lau, Kin-tak (2012) Sonication effect on the mechanical properties of MWCNTs reinforced natural rubber. Journal of Composite Materials . ISSN 0021-9983 (In Press)

Trada, M. and Mandava, J. and Ku, H. and Yousif, B. (2012) Tensile properties of bagasse reinforced epoxy composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today , 6-8 Nov 2012 , Kuala Lumpur, Malaysia .

Albdiry, M. T. and Almosawi, A. I. and Yousif, B. F. (2012) The synergistic effect of hybrid flame retardants on pyrolysis behaviour of hybrid composite materials. Journal of Engineering Science and Technology, 7 (3). pp. 351-359. ISSN 1823-4690

Ho, Mei-po and Wang, Hao and Lau, Kin-tak (2012) Thermal properties and structure conformation on silkworm silk fibre. In: Composites Australia and CRC-ACS, 2012 Conference: Diversity in Composite, 15-16 Mar 2012, Leura, Australia.

2011

Noor, M. M. and Hairuddin, A. Aziz and Wandel, Andrew P. and Yusaf, T. F. (2011) Implementation of conditional moment closure using the Taylor expansion and finite differences. In: 1st International Conference of Mechanical Engineering Research (ICMER 2011), 5-8 Dec 2011, Kuantan, Malaysia.

Mai-Duy, N. and Tran-Cong, T. (2011) A high-order upwind control-volume method based on integrated RBFs for fluid-flow problems. International Journal for Numerical Methods in Fluids, 67 (12). pp. 1973-1992. ISSN 0271-2091

Albdiry, M. T. and Almosawi, A. I. (2011) Effect of compacting pressure on microstructure and mechanical properties of carbide cutting tools. Powder Metallurgy, 54 (5). pp. 585-591. ISSN 0032-5899

Rao, G. Srinivasa and Sharma, K. V. and Chary, S. P. and Bakar, R. A. and Rahman, M. M. and Kadirgama, K. and Noor, M. M. (2011) Experimental study on heat transfer coefficient and friction factor of Al2O3 nanofluid in a packed bed column. Journal of Mechanical Engineering and Sciences, 1 (1). pp. 1-15.

Wandel, Andrew P. and Willey, Keith (2011) Peer review of teamwork for encouraging equal commitment to the group effort. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2011) A hybrid EMST-modified Curl's model for turbulent combustion modelling. In: 2011 USQ Research Evening, 17 Nov 2011, Toowoomba, Australia.

Al-Khaffajy, M. and Mossad, R. (2011) Optimization of the air gap spacing in a solar water heater with double glass cover. In: 9th Australasian Heat and Mass Transfer Conference, 2-4 Nov 2011, Melbourne, Australia.

Wandel, Andrew P. (2011) A stochastic micromixing model based on the turbulent diffusion length scale. In: Australian Combustion Symposium 2011 (ACS 2011), 29 Nov-1 Dec 2011, Newcastle, Australia.

Mandava, Jagan (2011) Mechanical behaviour of polymeric composition based on available natural fibres in Australia. [USQ Project] (Unpublished)

Hairuddin, A. Aziz and Yusaf, Talal F. and Wandel, Andrew P. (2011) Predicting the combustion behaviour of a diesel HCCI engine using a zero-dimensional single-zone model. In: Australian Combustion Symposium 2011 (ACS 2011), 29 Nov-1 Dec 2011, Newcastle, Australia.

Noor, M. M. and Yusaf, T. F. and Wandel, Andrew P. (2011) Study of random particle interactions for analysis of diffusion lengths in turbulent combustion modelling. In: Australian Combustion Symposium 2011 (ACS 2011), 29 Nov-1 Dec 2011, Newcastle, Australia.

Noor, M. M. and Amiruddin, A. K. and Kadirgama, K. and Sharma, K. V. (2011) The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP). In: 3rd International Conference on Energy and Sustainability , 11-13 Apr 2011, Alicante, Spain.

Yousif, B. F. and Nirmal, Umar (2011) Wear and frictional performance of polymeric composites aged in various solutions. Wear, 272 (1). pp. 97-104. ISSN 0043-1648

Mossad, Ruth (2011) Energy usage reduction in supermarket refrigerated food cabinets. In: Lee, Susan, (ed.) Encyclopedia of energy engineering and technology. Taylor & Francis, London, United Kingdom, pp. 1-7. ISBN 0-8493-3896-4

Motswagae, Tshepo (2011) A laboratory experiment based on the ‘Segway’. [USQ Project] (Unpublished)

Najafi, Gholamhassan and Ghobadian, Barat and Yusaf, Talal F. (2011) Algae as a sustainable energy source for biofuel production in Iran: a case study. Renewable and Sustainable Energy Reviews, 15 (8). pp. 3870-3876. ISSN 1364-0321

Goh, Steven and Hartle, Todd and Brodie, Megan (2011) Building leadership capacity of engineering academics in a leadership vacuum constructed within a participatory group to engage a professional body. In: REES 2011: Research in Engineering Education Symposium , 4-7 Oct 2011, Madrid, Spain.

Mossad, Ruth (2011) Cooling towers. In: Capehart, Barney L., (ed.) Encyclopedia of energy engineering and technology. Taylor & Francis Books, London, United Kingdom, pp. 246-254. ISBN 978-0-8493-3653-9

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru and Cooney, Tyson (2011) Cure kinetics of an epoxidized hemp oil based bioresin system. Journal of Applied Polymer Science, 122 (1). pp. 444-451. ISSN 0021-8995

Brown, Steven (2011) Design of a high-shear geopolymer concrete mixer. [USQ Project] (Unpublished)

Turnbull, Jon (2011) Improving the performance of the Nanango wastewater treatment plant. [USQ Project] (Unpublished)

Case, Jiel (2011) Initial design of a high-performance and cost-effective mountain bike. [USQ Project] (Unpublished)

Goh, Steven and Ku, Harry (2011) Intervening to improve the dissertation of final year engineering research projects. In: FIE 2011: Celebrating 41 Years of Monumental Innovations From Around the World , 12-15 Oct 2011, Rapid City, SD. USA.

Craig, Aston J. (2011) Investigation into a fleet bearing monitoring system. [USQ Project] (Unpublished)

Goh, Steven and Hartle, Todd and Brodie, Megan (2011) Perspectives on leadership concepts by engineering academics. In: FIE 2011: Celebrating 41 Years of Monumental Innovations from around the World , 12-15 Oct 2011, Rapid City, SD. USA.

Brookshaw, Iain (2011) Real time implementation of obstacle avoidance for an autonomous mobile robot using monocular computer vision. [USQ Project] (Unpublished)

Peauril, Joshua (2011) Recycling glass fibre composites – process and viability. [USQ Project] (Unpublished)

Farrington, Jock (2011) Redesign of an FSAE race car’s steering and suspension system. [USQ Project] (Unpublished)

Goh, Steven and Craig, Ian and Muller, Zach (2011) Solar thermal energy alternatives and their application to water heating and air cooling in the meat processing industry. In: SSEE 2011: Escaping Silos, 24–26 Oct 2011, Brisbane, Australia.

Kilian, Simone (2011) Sugarcane bagasse reinforced thermoplastic composites. [USQ Project] (Unpublished)

Wandel, Andrew P. (2011) Team formation by region to improve outcomes for distance-education students in a PBL course. In: FIE 2011: Celebrating 41 Years of Monumental Innovations From Around the World , 12-15 Oct 2011, Rapid City, SD. United States.

Rackemann, Benjamin (2011) The analysis and redesign of the spraycam sprayer to incorporate fibre composite pultrusions. [USQ Project] (Unpublished)

Searle, Joshua (2011) The efficient use of building mechanical services for saving energy. [USQ Project] (Unpublished)

Heaton, Erin (2011) Use of vibration signature in structural health monitoring (composite/internal damages). [USQ Project] (Unpublished)

Al-Sandooq, J. M. and Yousif, B. F. and Jensen, T. A. (2011) The possibility of using polymers in agriculture milling equipment. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Najafi, Gholmanhassan and Ghobadian, Barat and Yusaf, Talal F. (2011) Biofuel from microalgae: alternative, sustainable and renewable fuel. In: 10th International Conference on Sustainable Energy Technologies (SET 2011), 4-7 Sept 2011, Istanbul, Turkey.

Goh, Steven and Bullen, Frank (2011) Engineering faculties in developing and assessing professional competencies for engineers in Australia. In: 39th SEFI Annual Conference: Global Engineering Recognition, Sustainability and Mobility (SEFI 2011), 27-30 Sep 2011, Lisbon, Portugal.

Singh, Narish and Yousif, B. F. and Rilling, Dirk (2011) Tribological characteristics of sustainable fibre reinforced thermoplastic composites under wet adhesive wear. Tribology Transactions, 54 (5). 736-748. ISSN 1040-2004

Malvern, J. L. and Epaarachchi, J. A. and Lau, K. T. (2011) Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions. In: 18th International Conference on Composite Materials (ICCM-18), 21-26 Aug 2011, Jeju Island, South Korea.

Yusaf, T. F. and Yousif, B. F. and Elawad, M. M. (2011) Crude palm oil fuel for diesel-engines: experimental and ANN simulation approaches. Energy, 36 (8). 4871-4878. ISSN 0360-5442

Yusaf, T. and Saleh, K. H. and Said, M. A. (2011) Engine performance and emission analysis of LPG-SI engine with the aid of artificial neural network. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 225 (5). pp. 591-600. ISSN 0957-6509

Wang, Hao and Shi, Zhiming (2011) In vitro biodegradation behavior of magnesium and magnesium alloy. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 98B (2). pp. 203-209. ISSN 1552-4973

Lau, Alan K. T. and Ho, Mabel M. P. (2011) Recent research trend in natural-fibre composites. JEC Composites (67). pp. 50-52. ISSN 1639-965X

Goh, Steven (2011) Leadership in engineering education from K-12 to university: key to improving diversity in the engineering profession. In: ICWES 15: 15th International Conference of Women Engineers and Scientists , 19-22 Jul 2011, Adelaide, South Australia .

Ku, H. and Ahfock, T. and Yusaf, T. (2011) Remote access laboratories in Australia and Europe. European Journal of Engineering Education, 36 (3). pp. 253-268. ISSN 0304-3797

Ku, H. and Wang, H. and Pattarachaiyakoop, N. and Trada, M. (2011) A review on the tensile properties of natural fiber reinforced polymer composites. Composites Part B: Engineering, 42 (4). pp. 856-873. ISSN 1359-8368

Billingsley, John (2011) Machine vision in agriculture. In: Glinski, Jan and Horabik, Jozef and Lipiec, Jerzy, (eds.) Encyclopedia of agrophysics. Encyclopedia of Earth Sciences Series . Springer, Dordrecht, Netherlands, pp. 433-435. ISBN 978-90-481-3584-4

Yusaf, Talal and Goh, Steven and Borserio, J. A. (2011) Potential of renewable energy alternatives in Australia. Renewable and Sustainable Energy Reviews, 15 (5). pp. 2214-2221. ISSN 1364-0321

Kabir, M. M. and Wang, H. and Aravinthan, T. and Cardona, F. and Lau, K.-T. (2011) Effects of natural fibre surface on composite properties: a review. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing , 27-29 Apr 2011, Brisbane, Australia.

Manthey, N. W. and Cardona, F. and Aravinthan, T. (2011) Mechanical properties of epoxidized hemp oil based biocomposites: preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27 -29 Apr 2011, Brisbane, Australia.

Cooney, T. I. and Cardona, F. and Tran-Cong, T. (2011) Kinetics of in situ epoxidation of hemp oil under heterogeneous reaction conditions: an overview with preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27-29 Apr 2011, Brisbane, Australia.

Nguyen-Van, H. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2011) Buckling and vibration analysis of laminated composite plate/shell structures via a smoothed quadrilateral flat shell element with in-plane rotations. Computers and Structures, 89 (7-8). pp. 612-625. ISSN 0045-7949

Tran, C.-D. and Lucas, S. and Phillips, D. G. and Randeniya, L. K. and Baughman, R. H. and Tran-Cong, T. (2011) Manufacturing polymer/carbon nanotube composite using a novel direct process. Nanotechnology, 22 (14). pp. 1453021-1453029. ISSN 0957-4484

Ku, H. (2011) The process of updating production engineering in an Australian regional university excellence in developing e-learning. In: 2011 International MultiConference of Engineers and Computer Scientists (IMECS 2011) , 16-18 Mar 2011, Kowloon, Hong Kong.

Ku, H. and Wong, P. and Maxwell, A. and Huang, J. and Fung, H. and Mohan, T. (2011) A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

Ku, H. and Goh, S. and Ahfock, A. (2011) Flexible engineering degree programs with remote access laboratories in an Australian regional university known for its excellence in e-learning. Computer Applications in Engineering Education, 19 (1). pp. 18-25. ISSN 1099-0542

Yousif, B. F. and Al-Shalabi, Ammar and Rilling, Dirk G. (2011) On integration of mirror collector and Stirling engine for solar power system. In: 2007 International Conference on Environment: Survival and Sustainability (ESS 2007), 19-24 Feb 2007, Nicosia, Northern Cyprus.

Ku, H. and Wong, P. and Huang, J. and Fung, H. and Mohan, T. (2011) Tensile tests of glass powder reinforced epoxy composites: pilot study. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

Ku, H. and Fulcher, R. and Xiang, W. (2011) Using computer software packages to enhance the teaching of engineering management science: part 1 - critical path networks. Computer Applications in Engineering Education, 19 (1). pp. 26-39. ISSN 1061-3773

Fadhel, M. I. and Abdo, Ramez Abdulwasea and Yousif, B. F. and Zaharim, Azami and Sopian, K. (2011) Thin-layer drying characteristics of banana slices in a force convection indirect solar drying. In: EE 2011: 6th IASME/WSEAS International Conference on Energy and Environment , 23-25 Feb 2011, Cambridge, United Kingdom.

Singh, N. and Yousif, B. F. and Rilling, D. (2011) Adhesive wear of thermoplastic composite based on kenaf fibres. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225 (2). pp. 101-109. ISSN 1350-6501

Yousif, B. F. and Yeh, Kok Soon (2011) Badminton training machine with impact mechanism. Journal of Engineering Science and Technology, 6 (1). pp. 61-68. ISSN 1823-4690

Ahmed, Mansur and Islam, Md Saiful and Ahsan, Qumrul and Islam, Md Mainul (2011) Fabrication and characterization of unidirectional silk fibre composites. In: ICCST8: 8th International Conference on Composite Science and Technology, 22-24 Mar 2011, Kuala Lumpur, Malaysia.

Le-Cao, Khoa (2011) Radial-basis-function calculations of heat and viscous flows in multiply-connected domains. [Thesis (_PhD/Research)] (Unpublished)

Buttsworth, David R. and Agrira, Abdalla and Malpress, Ray and Yusaf, Talal (2011) Simulation of instantaneous heat transfer in spark ignition internal combustion engines: unsteady thermal boundary layer modeling. Journal of Engineering for Gas Turbines and Power , 133 (2). pp. 1-5. ISSN 0742-4795

Ho, Mei-Po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Mechanical properties of an injected silk fibre reinforced PLA composite. In: 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX), 14-17 Jan 2011, Auckland, New Zealand.

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2011) Free vibration analysis of laminated composite plates based on FSDT using one-dimensional IRBFN method. Computers and Structures, 89 (1-2). pp. 1-13. ISSN 0045-7949

An-Vo, D. A. and Mai-Duy, N. and Tran-Cong, T. (2011) A C2-continuous control-volume technique based on Cartesian grids and two-node integrated-RBF elements for second-order elliptic problems. CMES: Computer Modeling in Engineering and Sciences, 72 (4). pp. 299-335. ISSN 1526-1492

Mai-Duy, N. and Tran-Cong, T. and Phan-Thien, N. (2011) A numerical technique based on integrated RBFs for the system evolution in molecular dynamics. CMES: Computer Modeling in Engineering and Sciences, 79 (4). pp. 223-236. ISSN 1526-1492

Mai-Duy, N. and Tran-Cong, T. (2011) A stable and accurate control-volume technique based on integrated radial basis function networks for fluid-flow problems. In: ACAM 6: 6th Australasian Congress on Applied Mechanics , 12-15 Dec 2010, Perth, Western Australia.

Tran, C.-D. and An-Vo, D.-A. and Mai-Duy, N. and Tran-Cong, T. (2011) An integrated RBFN-based macro-micro multi-scale method for computation of visco-elastic fluid flows. CMES: Computer Modeling in Engineering and Sciences, 82 (2). pp. 137-162. ISSN 1526-1492

Mai-Duy, Nam and Tran-Cong, Thanh (2011) Compact local approximations employed with integrated RBFs for second-order elliptic differential equations. In: 3rd International Symposium on Computational Mechanics (ISCM III) and 2nd Symposium on Computational Structural Engineering (CSE II), 5-7 Dec 2011, Taipei, Taiwan.

Walsh, Dan (2011) Design and retrofit a compressed gas powered engine to a motor scooter. [USQ Project] (Unpublished)

Kabir, M. M. and Wang, H. and Cardona, F. and Aravinthan, T. (2011) Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Ho, M. P. and Lau, K.T. and Wang, H. (2011) Effect of degumming on tussah silk fibre. In: ICCM18: Composite Materials: Key to the Future, 21-26 Aug 2011, Jeju, Korea.

Zhang, Z. and Wang, H. and Reid, A. and Aravinthan, T. (2011) Effects of fly ash source and curing procedure on strength development of geopolymers. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

An-Vo, D. A. and Mai-Duy, N. and Tran-Cong, T. (2011) High-order upwind methods based on C2-continuous two-node integrated-RBF elements for viscous flows. CMES: Computer Modeling in Engineering and Sciences, 80 (2). pp. 141-177. ISSN 1526-1492

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. (2011) Identification of distortions to FBG spectrum using FBG fixed filters. In: ICCM18: Composite Materials: Key to the Future, 21-26 Aug 2011, Jeju, Korea.

Singh, Narish and Yousif, B. F. and Rilling, Dirk (2011) Investigations on wear and frictional properties of kenaf fibre polyurethane composites under dry and wet contact conditions. International Journal of Precision Technology, 2 (4). pp. 375-387. ISSN 1755-2060

An-Vo, D.-A. and Tran, C.-D. and Mai-Duy, N. and Tran-Cong, T. (2011) IRBFN-based multiscale solution of a model 1D elliptic equation. In: 33rd International Conference on Boundary Elements and other Mesh Reduction Methods, 28-30 Jun 2011, New Forest, UK.

Yusaf, Talal (2011) Mechanical treatment of microorganisms using ultrasound, shock and shear technology. [Thesis (_PhD/Research)] (Unpublished)

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2011) Moving least square - one dimensional integrated radial basis function networks for time dependent problems. In: 33rd International Conference on Boundary Elements and other Mesh Reduction Methods, 28-30 Jun 2011, New Forest, UK.

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2011) Natural fibre composites with QLD based fibres and vegetable oils. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Mossad, R. R. (2011) Numerical predictions of air temperature and velocity distribution to assist in the design of natural ventilation piggery buildings. Australian Journal of Multi-Disciplinary Engineering, 8 (2). pp. 181-187. ISSN 1448-8388

Ryan, Richard (2011) Optimisation of flow through a horizontal spiral baffled filter. [USQ Project] (Unpublished)

Goh, Steven C. and Ku, Harry S. (2011) Qualitative methodologies for dummies: engineers in investigation the quality of final year Engineering Research Project. In: 1st International Conference of STEM in Education, 26-27 Nov 2010, Brisbane, Australia.

Epaarachchi, J. A. (2011) The effect of viscoelasticity on fatigue behaviour of polymer matrix composites. In: Guedes, Rui Miranda, (ed.) Creep and fatigue in polymer matrix composites. Woodhead Publishing Ltd, Cambridge, United Kingdom, pp. 492-513. ISBN 978 1 84569 656 6; eISBN 978-0-85709-043-0

2010

Clarke, Jason and Wandel, Andrew P. and Mastorakos, E. (2010) Analysis of data to develop models for spray combustion. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Goh, Steven C. and Wang, Hao, eds. (2010) Proceedings of the 2010 Southern Region Engineering Conference (SREC 2010). Engineers Australia, Toowoomba, Australia.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Followell, David and Birt, Peter and Canning, John and Stevenson, Michael (2010) An investigation of spectral response of embedded Fibre Bragg Grating (FBG) sensors in a hollow composite cylindrical beam under pure torsion and combined loading. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Australia.

Malpress, Ray and Buttsworth, David (2010) Assessment of an eccentric link in the connecting rod of a spark ignition engine intended for variable compression ratio operation. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Western Australia.

Low, Tobias and Manzanera, Antoine (2010) Ground-plane classification for robot navigation: combining multiple cues toward a visual-based learning system. In: ICARCV 2010: 11th International Conference on Control, Automation, Robotics and Vision , 7-10 Dec 2010, Singapore.

Jokic, Michael D. and Wandel, Andrew P. and Kist, Alexander A. (2010) Which version art thou? Configuration management in engineering education. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Sharifian, Ahmad (2010) An experimental study of wind force acting on commercial double-layered square metal screens at different spacing. In: 17th Australasian Fluid Mechanics Conference (AFMC 2010), 5-9 Dec 2010, Auckland, New Zealand.

Widodo, A. S. and Buttsworth, D. R. (2010) Stagnation temperature measurements in the USQ hypersonic wind tunnel. In: 17th Australasian Fluid Mechanics Conference (AFMC 2010), 5-9 Dec 2010, Auckland, New Zealand.

Supeni, E. E. and Yusaf, Talal and Wandel, Andrew P. and Buttsworth, David R. and Noor, M. M. (2010) Experimental and modeling investigation of the performance characteristics on diesel HCCI with hydrogen additive - a review. In: 2nd National Conference in Mechanical Engineering Research and Postgraduate Studies, 3-4 Dec 2010, Kuantan, Pahang, Malaysia.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Canning, John (2010) Effects of the self distortions of embedded FBG sensors on spectral response due to torsional and combined loads. In: 3rd Asia-Pacific Workshop on Structural Health Monitoring, 30 Nov-2 Dec 2010, Tokyo, Japan.

Goh, Steven C. and Jokic, Michael D. and Hartle, Todd (2010) A new engineering management master to address the personal, professional and educational needs of engineering graduates to achieve EA chartered status. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Islam, Md Mainul and Aravinthan, Thiru (2010) Behaviour of structural fibre composite sandwich panels under point load and uniformly distributed load. Composite Structures, 93 (1). pp. 206-215. ISSN 0263-8223

Cardona, F. and Ku, H. and Chouzenoux, L. (2010) Effect of tannin on flexural properties of phenol formaldehyde glycerol reinforced composites: preliminary results. Journal of Reinforced Plastics and Composites, 29 (24). pp. 3543-3553. ISSN 0731-6844

Ku, H. S-L. and Mustapha, U. and Goh, S. (2010) Literature review of past and present performance of Nigerian manufacturing sector. In: IMechE 2010: Institution of Mechanical Engineers.

Goh, Steven C. and Worden, John and Zhou, Hong and Clewett, John (2010) Revitalisation of a 2nd level engineering and spatial science PBL course: almost there but... In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Yousif, B. F. and El-Tayeb, N. S. M. (2010) Wear characteristics of thermoset composite under high stress three-body abrasive. Tribology International, 43 (12). pp. 2365-2371. ISSN 0301-679X

Epaarachchi, Jayantha A. and Rathnaweera, Gayan and Canning, John and Stevenson, Michael (2010) Response Fibre Bragg Grating (FBG) strain sensors embedded at different locations through the thickness around a delamination in a composite lamina. In: 7th Asian-Australasian Conference on Composites (ACCM7), 15-18 Nov 2010, Taipei, Taiwan.

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2010) Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Hairuddin, A. Aziz and Wandel, Andrew P. and Yusaf, Talal (2010) Hydrogen and natural gas comparison in diesel HCCI engines -a review. In: 2010 Southern Region Engineering Conference (SREC2010), 11-12 Nov 2010, Toowoomba, Australia.

Malpress, Ray and Buttsworth, David (2010) Internal combustion engines: a role to fill for transport in an energy conscious environment. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Ku, Harry S. and Goh, Steven C. (2010) Preliminary results on literature review skills of students doing capstone projects. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Queensland, Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2010) A numerical study of 2D integrated RBFNs incorporating Cartesian grids for solving 2D elliptic differential problems. Numerical Methods for Partial Differential Equations, 26 (6). pp. 1443-1462. ISSN 0749-159X

Guades, Ernesto Jusayan and Aravinthan, Thiru and Islam, Md Mainul (2010) An overview on the application of FRP composites in piling system. In: 2010 Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Queensland, Australia.

Sharifian, Ahmad and Buttsworth, David (2010) Double-layered metal mesh screens to contain or exclude thermal radiation from bush fires. Journal of Fire Protection Engineering, 20 (4). pp. 291-311. ISSN 1042-3915

Slack–Smith, David (2010) Structural design, quotation and production support using parametric CAD tools and national/international standards for fluid storage systems. [USQ Project] (Unpublished)

Wang, Hao (2010) Sustainable materials research at USQ. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Haenke, Michael (2010) The development of a wind and solar power calculator for use within the private sector. [USQ Project] (Unpublished)

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Aravinthan, Thiru (2010) The developments of structural health/integrity monitoring systems using FBG sensors at CEEFC of USQ. In: 2010 Southern Region Engineering Conference (SREC 2010) , 11-12 Nov 2010, Toowoomba, Australia.

Chin, C. W. and Yousif, B. F. (2010) Tribological behaviour of KFRE composite. International Journal of Modern Physics B, 24 (28). pp. 5589-5599. ISSN 0217-9792

Tran, Canh-Dung and Smith, Shaun M. and Higgerson, G. and Bui, Anh and Randeniya, Lakshman K. and Tran-Cong, Thanh (2010) Spinning CNT based composite yarns using a dry spinning process. In: 2010 International Conference on Nanoscience and Nanotechnology (ICONN 2010), 22-26 Feb 2010, Sydney, Australia.

Smith, B. (2010) A biomechanical analysis for improved ergonomics in metal detector products using trajectory optimisation. [USQ Project] (Unpublished)

Assiriyage, Buddhi Nuwan Lanka (2010) An investigation of aluminium/eproxy particulate composite system - impact/long-term behavior. [USQ Project] (Unpublished)

Clarke, Jason (2010) Analysis of data to develop models for spray combustion. [USQ Project] (Unpublished)

Walker, Cameron (2010) Automated soil compaction machine for the preparation of Califorian bearing ratio and proctor specimens. [USQ Project] (Unpublished)

Di Bella, Robert Michael (2010) Biogas generation from an anaerobic pond 'abattoir'. [USQ Project] (Unpublished)

Donald, Michael Craig (2010) Comparative properties of epoxy/sawdust composites with palm oil cured by microwave and thermal treatment. [USQ Project] (Unpublished)

Perry, Ramon (2010) Design of a small wind turbine for a rural community in Australia. [USQ Project] (Unpublished)

Wilson, Bede (2010) Development of an unmanned aerial vehicle for use during disaster situations. [USQ Project] (Unpublished)

Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275

Goh, Steven and Bullen, Frank (2010) Engineering management education post GFC and Copenhagen: are we on the right track? In: FIE 2010: Celebrating 40 Years of Innovation, 27-30 Oct 2010, Arlington, VA. United States.

Philips, Cameron Charles MacGregor (2010) Gladstone Power Station demineralised water plant asset strategy development. [USQ Project] (Unpublished)

Commons-Fidge, Ian G. (2010) Grinding mill conceptual design developments. [USQ Project] (Unpublished)

Baker, Stuart (2010) Induced draft (ID) fan lubrication system design review and proposed modification upgrade at Callide C Power Station. [USQ Project] (Unpublished)

Muller, Zach Anthony (2010) Investigation of solar thermal energy alternatives and their applications to water heating and air cooling in the meat processing industry. [USQ Project] (Unpublished)

Bishop, Damon Thomas (2010) Pump gland improvement project. [USQ Project] (Unpublished)

Nawratzki, Guy (2010) Suspension development for a short circuit racing car. [USQ Project] (Unpublished)

Boh, Tjasa and Billingsley, John and Bradbeer, Robin S. and Hodgson, Paul (2010) Terramechanics based traction control of underwater wheeled robot. In: OCEANS 2010: Showcasing Advances in Marine Science and Engineering, 24-27 May 2010, Sydney, Australia.

Kirkland, Rhys (2010) The development of a small scale gas turbine to assist in the analysis of coal seam gas as an alternative stationary jet fuel for Australia. [USQ Project] (Unpublished)

Yousif, B. F. and Nirmal, Umar and Wong, K. J. (2010) Three-body abrasion on wear and frictional performance of treated betelnut fibre reinforced epoxy (T-BFRE) composite. Materials and Design, 31 (9). pp. 4514-4521. ISSN 0264-1275; 0261-3069

Downing, Matthew (2010) Upon the construction of a remote controlled tracked reconnaissance vehicle. [USQ Project] (Unpublished)

Buttsworth, David R. (2010) Ludwieg tunnel facility with free piston compression heating for supersonic and hypersonic testing. In: 9th Australian Space Science Conference, 28-30 Sept 2009, Sydney, Australia.

Islam, Md Mainul and Kim, Ho Sung (2010) Manufacturing and behaviour of sandwich composites made of starch as binder for core and adhesive between core and skins. In: 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010), 24-26 Sept 2010, Kottayam, Kerala, India.

Ahmed, Mansur and Islam, Md Saiful and Ahsan, Qumrul and Islam, Md Mainul (2010) Physical and tensile properties of raw and treated silk fibres. In: 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010), 24-26 Sept 2010, Kottayam, Kerala, India.

Ku, H. and Trada, M. and Huq, R. (2010) A pilot study on the flexural properties of vinyl ester composites filled with glass powder. In: MFMS 2010: 3rd International Conference on Multi-Functional Materials and Structures, 14-18 Sep 2010, Jeonju, South Korea.

Yousif, B. F. (2010) Effect of oil palm fibres volume fraction on mechanical properties of polyester composites. International Journal of Modern Physics B, 24 (23). pp. 4459-4470. ISSN 0217-9792

Mustapha, Umar (2010) The role of product design, manufacturing systems and environmental uncertainty in the Nigerian manufacturing organizations. [Thesis (_PhD/Research)] (Unpublished)

Randeniya, Lakshman K. and Bendavid, Avi and Martin, Philip J. and Tran, Canh-Dung (2010) Composite yarns of multi-walled carbon nanotubes with metallic electrical conductivity. Small, 6 (16). pp. 1806-1811. ISSN 1613-6810

Ku, H. and Cardona, F. and Rogers, D. and Munoz, J.-C. (2010) Development of polymer network of phenolic and epoxies resins mixed with linseed oil: pilot study. Journal of Materials Engineering and Performance, 19 (6). pp. 912-919. ISSN 1059-9495

Billingsley, John (2010) Controlled damping of a 48-metre wide spray rig. In: M2VIP 2010: 16th Annual Conference on Mechatronics and Machine Vision in Practice, 22-23 Jun 2010, Darussalam, Brunei.

Yousif, B. F. and Alsofyani, I. M. and Yusaf, Talal (2010) Adhesive wear and frictional characteristics of UHMWPE and HDPE sliding against different counterfaces under dry contact condition. Tribology, 4 (2). pp. 78-85. ISSN 1751-5831

Kittipoomwong, Prakorn and See, Howard and Mai-Duy, Nam (2010) Dynamic simulation of non-spherical particulate suspensions. Rheologica Acta, 49 (6). pp. 597-606. ISSN 0035-4511

Ku, Siu Lung Harry and Wen, Peng and Xiang, Wei (2010) Engineering education in China and Australia: addressing the demand-supply gap. Hong Kong Institution of Engineers Transactions, 17 (2). pp. 20-26. ISSN 1023-697X

Epaarachchi, Jayantha A. and Reushle, Matthew T. (2010) Performance of aluminium/vinylester particulate composite. In: PRICM7: 7th Pacific Rim International Conference on Advanced Materials and Processing, 2-6 Aug 2010, Cairns, Australia.

Ku, H. and Goh, S. (2010) Final year engineering projects in Australia and Europe. European Journal of Engineering Education, 35 (2). pp. 161-173. ISSN 0304-3797

Li, Qiang and Yu, Baoyi and Zhang, Huawen and Li, Runxia and Wang, Feng and Xie, Shuisheng and Huang, Guojie and Wang, Hao (2010) Cellular automaton modeling of semisolid microstructure formation. China Foundry, 7 (2). pp. 143-148. ISSN 1672-6421

Yusaf, Talal F. and Buttsworth, D. R. and Saleh, Khalid H. and Yousif, B. F. (2010) CNG-diesel engine performance and exhaust emission analysis with the aid of artificial neural network. Applied Energy, 87 (5). pp. 1661-1669. ISSN 0306-2619

Nirmal, Umar and Yousif, B. F. and Rilling, Dirk and Brevern, P. V. (2010) Effect of betelnut fibres treatment and contact conditions on adhesive wear and frictional performance of polyester composites. Wear, 268 (11-12). pp. 1354-1370. ISSN 0043-1648

Mai-Duy, Nam and Tran-Cong, Thanh (2010) Point-wise integrated-RBF-based discretisation of differential equations. In: 2nd International Symposium on Computational Mechanics (ISCM II) in conjunction with EPMESC 2009, 30 Nov-3 Dec 2009, Hong Kong, Macau.

Le, Phong B. H. and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2010) A cartesian-grid collocation technique with integrated radial basis functions for mixed boundary value problems. International Journal for Numerical Methods in Engineering, 82 (4). pp. 435-463. ISSN 0029-5981

Ku, H. and Trada, M. and Nixon, R. and Wong, P. (2010) Flexural properties of phenolic resin reinforced with glass powder: preliminary results. Journal of Applied Polymer Science, 116 (1). pp. 347-354. ISSN 0021-8995

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

Mai-Duy, Nam and Tran-Cong, Thanh (2010) A control volume technique based on integrated RBFNs for the convection-diffusion equation. Numerical Methods for Partial Differential Equations, 26 (2). 426 -447. ISSN 0749-159X

Epaarachchi, J. and Ku, H. and Gohel, K. (2010) A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites. Journal of Composite Materials, 44 (6). pp. 779-788. ISSN 0021-9983

Lau, Kin-tak and Ho, Mei-po and Au-Yeung, Chi-ting and Cheung, Hoi-yan (2010) Biocomposites: their multifunctionality. International Journal of Smart and Nano Materials, 1 (1). pp. 13-27. ISSN 1947-5411

Le, Phong (2010) RBF-based meshless modeling of strain localization and fracture. [Thesis (_PhD/Research)] (Unpublished)

Tran, Canh-Dung and Phillips, David G. and Fraser, W. Barrie (2010) Stationary solution of the ring-spinning balloon in zero air drag using a RBFN based mesh-free method. Journal of the Textile Institute, 101 (2). pp. 101-110. ISSN 0040-5000

Ku, H. and Kota, V. and Trada, M. (2010) Optimum percentage of fly ash reinforcement in vinyl ester composites. Journal of Materials in Civil Engineering, 22 (1). pp. 104-107. ISSN 0899-1561

Nasir, T. and Yousif, B. F. and McWilliam, S. and Salih, N. D. and Hui, L. T. (2010) An artificial neural network for prediction of the friction coefficient of multi-layer polymeric composites in three different orientations. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (2). pp. 419-429. ISSN 0954-4062

Wong, K. J. and Yousif, B. F. and Low, K. O. and Ng, Y. and Tan, S. L. (2010) Effects of fillers on the fracture behaviour of particulate polyester composites. Journal of Strain Analysis for Engineering Design, 45 (1). pp. 67-78. ISSN 0309-3247

Amir, Al-Falahi and Yusoff, M. Z. and Yusaf, T. (2010) Numerical simulation of inviscid transient flows in shock tube and its validations. International Journal of Mathematical, Physical and Engineering Sciences, 4 (1). pp. 52-62. ISSN 1307-7465

Yusaf, Talal and Said, Mior Azman and Hussein, Ibrahim (2010) Performance and emission investigation of a four-stroke liquefied petroleum gas spark-ignition engine generator used in a Malaysian night market. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 224 (3). pp. 339-347. ISSN 0957-6509

McCarthy, Alison and Hancock, Nigel and Raine, Steven R. (2010) VARIwise: a general-purpose adaptive control simulation framework for spatially and temporally varied irrigation at sub-field scale. Computers and Electronics in Agriculture, 70 (1). pp. 117-128. ISSN 0168-1699

Yousif, B. F. and El-Tayeb, N. S. M. (2010) Wet adhesive wear characteristics of untreated oil palm fibre-reinforced polyester and treated oil palm fibre-reinforced polyester composites using the pin-on-disc and block-on-ring techniques. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 224 (2). pp. 123-131. ISSN 1350-6501

Ho-Minh, Dao and Mai-Duy, Nam and Tran-Cong, Thanh (2010) A Cartesian-grid integrated-RBF Galerkin technique. In: Sarler, Bozidar and Atluri, Satya N., (eds.) Recent studies in meshless and other novel computational methods. Tech Science Press, Duluth, GA. USA, pp. 87-102. ISBN 0-9824205-4-4

Ho-Minh, Dao and Mai-Duy, Nam and Tran-Cong, Thanh (2010) A cartesian-grid integrated-RBF method for viscoelastic flows. In: 9th World Congress on Computational Mechanics and 4th Asian-Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), 19-23 July 2010, Sydney, Australia.

Malpress, Ray and Buttsworth, David (2010) A comparison between two-position variable compression ratio and continuously variable compression ratio engines using numerical simulation. In: ICEF 2009: ASME Internal Combustion Engine Division Fall Technical Conference , 27-30 Sep 2009, Lucerne, Switzerland.

Le-Cao, K. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2010) A new integrated-rbf-based domain-embedding scheme for solving fluid-flow problems. In: 9th World Congress on Computational Mechanics and 4th Asian-Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), 19-23 July 2010, Sydney, Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2010) A numerical scheme based on local integrated RBFNs and Cartesian grids for solving second-order elliptic problems in two dimensions. In: Sarler, Bozidar and Atluri, Satya N., (eds.) Recent studies in meshless andoOther novel computational methods. Tech Science Press, Duluth, GA.USA, pp. 17-33. ISBN 0-9824205-4-4

Mai-Duy, Nam and Tran-Cong, Thanh (2010) A simple and effective preconditioner for integrated-RBF-based Cartesian-grid schemes. In: 2010 International Conference on Computational and Experimental Engineering & Sciences 2010, 28 Mar - 1 Apr 2010, Las Vegas, USA.

Yousif, B. F. and Yusaf, Talal (2010) Abrasive wear behaviour of epoxy composite based on kenaf fibres. In: ASIATRIB 2010: Frontiers in Tribology - Knowledge and Friendship, 5-9 Dec 2010, Perth, Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2010) An upwind control-volume method based on integrated RBFs for fluid-flow problems. In: 9th World Congress on Computational Mechanics and 4th Asian-Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), 19-23 July 2010, Sydney, Australia.

Ning, Zhiliang and Wang, Hao and Sun, Jianfei (2010) Deformation behavior of semisolid A356 alloy prepared by low temperature pouring. Materials and Manufacturing Processes, 25 (7). pp. 648-653. ISSN 1042-6914

Buttsworth, David and D'Souza, Mary and Potter, Daniel and Eichmann, Troy and Mudford, Neil and McGilvray, Matthew and McIntyre, Timothy J. and Jacobs, Peter and Morgan, Richard (2010) Expansion tunnel radiation experiments to support Hayabusa re-entry observations. In: 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition (AIAA 2010), 4-7 Jan 2010, Orlando, FL, USA.

Ho-Minh, Dao and Mai-Duy, Nam and Tran-Cong, Thanh (2010) Galerkin/collocation methods based on 1D-integrated-RBFNs for viscoelastic flows. CMES: Computer Modeling in Engineering and Sciences, 70 (3). pp. 217-251. ISSN 1526-1492

Ngo-Cong, Duc and Mai-Duy, Nam and Karunasena, W. and Tran-Cong, Thanh (2010) Integrated-RBF network method for free vibration analysis of laminated composite plates. In: 9th World Congress on Computational Mechanics and 4th Asian-Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), 19-23 July 2010, Sydney, Australia.

Singh, Narish and Rilling, Dirk and Yousif, B. F. (2010) Kenaf fibers for tribo-thermoplastic composites. In: IMECE 2009: ASME International Mechanical Engineering Congress and Exposition, 13-19 Nov 2009, Lake Buena Vista, FL. United States.

Wandel, Andrew P. (2010) Linkages between courses: a holistic approach to programmes. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Cardona, F. and Aravinthan, T. and Moscou, C. (2010) Modified PF resins for composite structures with improved mechanical properties. Polymers and Polymer Composites, 18 (6). pp. 297-306. ISSN 0967-3911

Mossad, Ruth and Aral, Hal (2010) Numerical modeling of flow in a horizontal sand filter. American Journal of Engineering and Applied Sciences, 3 (2). pp. 286-292. ISSN 1941-7020

Ming Chai, Adrian Ngu and Ibrahim, M. and Chuan, Cheah Bin and Yousif, B. F. (2010) On the development of solar drying system. In: ASME 2009 International Mechanical Engineering Congress and Exposition (IMECE2009), 13-19 Nov 2009, Florida, United States.

Ho-Minh, D. and Le-Cao, K. and Mai-Duy, N. and Tran-Cong, T. (2010) Simulation of fluid flows at high Reynolds/Rayleigh numbers using integrated radial basis functions. In: 17th Australasian Fluid Mechanics Conference (AFMC 2010), 5-9 Dec 2010, Auckland, New Zealand.

Buttsworth, David R. and Agrira, Abdalla and Malpress, Ray and Yusaf, Talal (2010) Simulation of instantaneous heat transfer in spark ignition internal combustion engines: unsteady thermal boundary layer modelling. In: ICEF 2009: ASME Internal Combustion Engine Division Fall Technical Conference, 27-30 Sep 2009, Lucerne, Switzerland.

Tran, Canh-Dung and Smith, Shaun M. and Higgerson, G. and Huynh, Chi and Kviz, Ladge and Maudev, George and Lucas, Stuart and Bui, Anh (2010) Spinning CNT based composite yarns using a dry spinning process. In: 2010 International Conference on Nanoscience and Nanotechnology (ICONN 2010), 22- 26 Feb 2010, Sydney, Australia.

Wandel, Andrew P. (2010) Student usage of videos containing worked solutions. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Thorpe, David and Goh, Steven (2010) Study of SME innovation in two Queensland industries. In: Al-Hakim, Latif and Jin, Chen, (eds.) Innovation in business and enterprise: technologies and frameworks. Business Science Reference (IGI Global), Hershey PA, USA, pp. 240-259. ISBN 978-1-61520-643-8

Wong, K. J. and Yousif, B. F. and Low, K. O. (2010) The effects of alkali treatment on the interfacial adhesion of bamboo fibres. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 224 (3). pp. 139-148. ISSN 1464-4207

Billingsley, John (2010) The facts about carbon and climate: a presentation of data for the reader's evaluation. In: 2010 Southern Region Engineering Conference (SREC2010), 10-12 Nov 2010, Toowoomba, Australia.

Nirmal, Umar and Jamil, Nadia and Yousif, B. F. and Rilling, Dirk and Brevern, P. V. (2010) The potential of using treated betelnut fibres as reinforcement for tribo-bio polymeric composites subjected to dry/wet contact conditions. In: ICNP 2010: Macro to Nano Scales, 24-26 Sep 2010, Kottayam, India.

Le-Cao, K. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2010) Towards an analysis of shear suspension flows using radial basis functions. CMES: Computer Modeling in Engineering and Sciences, 67 (3). pp. 265-294. ISSN 1526-1492

Al-Haddad, A. A. and Salih, Nbhan D. and Wen, Chin Chee and Yusaf, T. F. and Yousif, B. F. (2010) New technique measuring film thickness for tribological machines. In: ASME 2009: International Mechanical Engineering Congress and Exposition, 13-19 Nov 2009, Lake Buena Vista, FL. USA.

Yousif, B. F. and Lau, Saijod T. W. and McWilliam, S. (2010) Polyester composite based on betelnut fibre for tribological applications. Tribology International, 43 (1-2). pp. 503-511. ISSN 0301-679X

Le, Phong B. H. and Rabczuk, Timon and Mai-Duy, Nam and Tran-Cong, Thanh (2010) A moving IRBFN-based Galerkin meshless method. CMES: Computer Modeling in Engineering and Sciences, 66 (1). pp. 25-52. ISSN 1526-1492

Le, Phong B. H. and Rabczuk, Timon and Mai-Duy, Nam and Tran-Cong, Thanh (2010) A moving IRBFN-based integration-free meshless method. CMES: Computer Modeling in Engineering and Sciences, 61 (1). pp. 63-109. ISSN 1526-1492

Phillips, D. G. and Tran, Canh-Dung and Fraser, W. B. and van der Heijden, G. H. M. (2010) Torsional properties of staple fibre plied yarns. Journal of the Textile Institute, 101 (7). pp. 595-612. ISSN 0040-5000

2009

Goh, Steven and Worden, John and Zhou, Hong and Cubero, Samuel (2009) A case study on the revitalisation of a 2nd level engineering and spatial science PBL course. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, South Australia.

Said, Mior Azman and Buttsworth, David R. and Yusaf, Talal (2009) A review of radiation heat transfer measurement for diesel engines using the two-colour method. In: 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability (ICEE 2009) , 7-8 Dec 2009, Malacca, Malaysia.

Billingsley, John and Oetomo, Denny and Reid, John (2009) Agricultural robotics. IEEE Robotics and Automation Magazine, 16 (4). 16, cont-19. ISSN 1070-9932

Widodo, A. and Buttsworth, D. (2009) Deduction of temperature fluctuations in transient compression wind tunnels using incompressible turbulent flow data. In: 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability (ICEE 2009), 7-8 Dec 2009, Malacca, Malaysia.

Nguyen-Van, Hieu (2009) Development and application of assumed strain smoothing finite element technique for composite plate/shell structures. [Thesis (_PhD/Research)] (Unpublished)

Goh, Steven and Bullen, Frank (2009) Diversification of engineering management studies in enriching the learning experience for the 21st century global engineer. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, South Australia.

Ku, Harry and Wen, Paul and Xiang, Wei and Goh, Steven (2009) Engineering education - undergraduate and masters: China and down under. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, South Australia.

Agrira, Abdalla and Buttsworth, David R. and Yusaf, Talal (2009) Instantaneous heat flux simulation of S.I. engines: comparison of unsteady thermal boundary layer modelling with experimental data. In: 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability (ICEE 2009), 7-8 Dec 2009, Malacca, Malaysia.

Buttsworth, D. R. (2009) Nitrous oxide decomposition for supersonic combustion experiments in the USQ Ludwieg Tube facility. In: Australian Combustion Symposium 2009 (ACS09), 2-4 Dec 2009, Brisbane, Australia.

Najafi, G. and Yusaf, T. F. and Ghobadian, B. and Najmeddin, V. R. and Yousif, B. F. (2009) Performance and exhaust emission of a SI engine fuelled with potato waste ethanol and its blends with gasoline. RERIC International Energy Journal, 10 (4). pp. 215-226. ISSN 1513-718X

Buttsworth, David R. and Jacobs, Peter A. (2009) Premature ignition in scramjets with intake injection: a preliminary laminar mixing layer simulation. In: Australian Combustion Symposium 2009 (ACS09), 2-4 Dec 2009, Brisbane, Australia.

Ku, Harry Siu-Lung and Cardona, Francisco and Trada, Mohar and Vigier, Gurlaume (2009) Flexural properties of sawdust reinforced phenolic composites: pilot study. Journal of Applied Polymer Science, 114 (3). pp. 1927-1934. ISSN 0021-8995

Goh, S. and Bullen, F. and Gibbings, P. (2009) A proposed learning journey for the 21st century global engineering manager: an Australian perspective. In: APES 2009: Managing Projects, Programs and Ventures in Times of Uncertainty and Disruptive Change, 19-20 Nov 2009, Sydney, Australia.

Hasna, Abdallah M. (2009) Chemical engineering industry transition towards sustainability. In: SSEE 2009: Solutions for a Sustainable Planet, 22-24 Nov 2009, Melbourne, Australia.

Kirsch, Joshua (2009) Design of a small wind turbine for electric power generation(1-5kW). [USQ Project] (Unpublished)

Goh, Steven and Park, Sang-Soon (2009) Enabling pathways by enabling cultural and value change in engineering academics. In: Enabling Pathways: 3rd National Conference of Enabling Educators, 25-27 Nov 2009, Toowoomba, Australia.

Jeffery, Simon (2009) Review of failure mode, effect and criticality analysis (FMECA) on major equipment of the crushing and screening plant at the BORAL Quarry at Ormeau, Queensland. [USQ Project] (Unpublished)

Coates, Gary (2009) Steering and suspension design for a SAE-A formula race car. [USQ Project] (Unpublished)

Mead, Stuart (2009) Numerical modelling of horizontal flow in sand filters. [USQ Project] (Unpublished)

Ku, Harry S. and Trada, Mohan and Zong, Xuejin and Wong, Peter (2009) Flexural properties of phenolic resin reinforced with glass powder. In: ICAST 2009: 20th International Conference on Adaptive Structures and Technologies , 20-22 Oct 2009, Shatin, Hong Kong.

Trada, Mohan and Ku, Harry and Vedhar, Jayant (2009) Flexural strength of phenol formaldehyde composites post-cured in microwaves: preliminary results. In: MFMS 2009: 2nd International Conference on Multi-functional Materials and Structures, 9-12 Oct 2009, Qingdao, China.

Mai-Duy, Nam and Ho-Minh, Dao and Tran-Cong, Thanh (2009) A Galerkin approach incorporating integrated radial basis function networks for the solution of 2D biharmonic equations. International Journal of Computer Mathematics, 86 (10-11). pp. 1746-1759. ISSN 0020-7160

Reinbott, Nigel (2009) A review and update of the supply chain documentation within Amcor Flexibles. [USQ Project] (Unpublished)

Milne, G. (2009) Airframe development and flight testing for entry into the 2009 Outback Challenge. [USQ Project] (Unpublished)

Kuan, Siew Yeng (2009) Design, construction and operation of the floating roof tank. [USQ Project] (Unpublished)

Assiriyage, Buddhi Nuwan Lanka (2009) Develop a computer-based system to assess and exercise the arm movement of stroke patients. [USQ Project] (Unpublished)

O'Shannassy, Geoffrey Mark (2009) Development of a driver training simulator for use by stroke patients. [USQ Project] (Unpublished)

Grimm, Justin John (2009) Electromagnetic linear actuator - design, manufacture and control. [USQ Project] (Unpublished)

Manthey, Nathan William (2009) Environmentally friendly natural fibre composites with Qld. based vegetable oils. [USQ Project] (Unpublished)

Cooney, Tyson (2009) Epoxidised resins from natural renewable resources. [USQ Project] (Unpublished)

Huq, Rezwanul (2009) Flexural strength of three types of glass powder reinforced vinyl ester composites. [USQ Project] (Unpublished)

Korowa, Geoffrey (2009) Fracture toughness of glass powder reinforced vinyl ester resin. [USQ Project] (Unpublished)

Zhu, Z. W. and Zhang, H. F. and Wang, Hao and Ding, B. Z. and Hu, Z. Q. and Huang, Han (2009) Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting. Journal of Materials Research, 24 (10). pp. 3108-3115. ISSN 0884-2914

Goh, Steven C. (2009) Investing in the future of engineering education infrastructure for sustainability. In: Southern Engineering Conference, 17-18 October 2009, Springfield, Qld, Australia.

Eddine, Mustapha Jamal (2009) Measurement of fracture toughness, mechanical and electrical loss tangents of calcium carbonate reinforced vinyl ester composites. [USQ Project] (Unpublished)

Zerbst, Samuel David William (2009) Temperature effects on a fibre reinforced polymer material. [USQ Project] (Unpublished)

Zhong, Xiaoliang (2009) Tensile strength of sawdust reinforced vinyl ester composites. [USQ Project] (Unpublished)

Garratt, Blythe Jonathan (2009) The development of a wrist rehabilitation device for movement therapy. [USQ Project] (Unpublished)

Gould, Nicholas and Goh, Steven C. (2009) The influencing factors in designing conceptual energy-waste solutions for sustainable housing. In: 2009 Southern Engineering Conference: Infrastructure Investment For a New Economy, 17-18 Oct 2009, Springfield, Qld, Australia.

Coulter, Allison Kerrie-Anne (2009) Use of Fiber Bragg grating sensors in structural health monitoring. [USQ Project] (Unpublished)

Billingsley, John (2009) Automation and the farmer. In: SEAg 2009: Agricultural Technology in a Changing Climate, 13-16 Sept 2009, Brisbane, Australia.

Tran, Canh-Dung and Humphries, William and Smith, Shaun M. and Huynh, Chi and Lucas, Stuart (2009) Improving the tensile strength of carbon nanotube spun yarns using a modified spinning process. Carbon, 47 (11). pp. 2662-2670. ISSN 0008-6223

Genet, Martin and Yan, Wenyi and Tran-Cong, Thanh (2009) Investigation of a hydraulic impact: a technology in rock breaking. Archive of Applied Mechanics, 79 (9). pp. 825-841. ISSN 0939-1533

Ku, H. and Xiang, W. and Pattarachaiyakoop, N. (2009) Mathematical modeling of the fracture toughness of phenol formaldehyde composites reinforced with E-spheres. In: 2nd International Conference on Multi-functional Materials and Structures, 9-12 Oct 2009, Qingdao, China.

Najafi, G. and Ghobadian, B. and Tavakoli, T. and Yusaf, T. (2009) Potential of bioethanol production from agricultural wastes in Iran. Renewable and Sustainable Energy Reviews, 13 (6-7). pp. 1418-1427. ISSN 1364-0321

Golshani, Aliakbar and Tran-Cong, Thanh (2009) Energy analysis of hydraulic fracturing. KSCE Journal of Civil Engineering, 13 (4). pp. 219-224. ISSN 1226-7988

Yousif, B. F. and Devadas, Alvin and Yusaf, Talal (2009) Adhesive wear and frictional behaviour of multilayered polyester composite based on betelnut fiber mats under wet contact conditions. Surface Review and Letters, 16 (3). pp. 407-414. ISSN 0218-625X

Le-Cao, K. and Mai-Duy, N. and Tran-Cong, T. (2009) An effective integrated-RBFN Cartesian-grid discretization for the stream function-vorticity temperature formulation in nonrectangular domains. Numerical Heat Transfer, Part B: Fundamentals, 55 (6). pp. 480-502. ISSN 1040-7790

Mai-Duy, Nam and Tran-Cong, Thanh (2009) Integrated radial-basis-function networks for computing Newtonian and non-Newtonian fluid flows. Computers and Structures, 87 (11-12). pp. 642-650. ISSN 0045-7949

Amir, Al-Falahi and Yusoff, M. Z. and Shuaib, N. H. and Yusaf, T. (2009) Flow instability in shock tube due to shock wave-boundary layer-contact surface interactions, a numerical study. European Journal of Scientific Research, 30 (1). pp. 164-176. ISSN 1450-216X

Najafi, G. and Ghobadian, B. and Tavakoli, T. and Buttsworth, D. R. and Yusaf, T. F. and Faizollahnejad, M. (2009) Performance and exhaust emissions of a gasoline engine with ethanol blended gasoline fuels using artificial neural network. Applied Energy, 86 (5). pp. 630-639. ISSN 0306-2619

Ghobadian, B. and Rahimi, H. and Nikbakht, A. M. and Najafi, G. and Yusaf, T. F. (2009) Diesel engine performance and exhaust emission analysis using waste cooking biodiesel fuel with an artificial neural network. Renewable Energy, 34 (4). pp. 976-982. ISSN 0960-1481

Ghobadian, Barat and Najafi, Gholamhassan and Rahimi, Hadi and Yusaf, T. F. (2009) Future of renewable energies in Iran. Renewable and Sustainable Energy Reviews, 13 (3). pp. 689-695. ISSN 1364-0321

Tran, Canh-Dung and Phillips, David G. and Tran-Cong, Thanh (2009) Computation of dilute polymer solution flows using BCF-RBFN based method and domain decomposition technique. Korea-Australia Rheology Journal, 21 (1). pp. 1-12. ISSN 1226-119X

Yusaf, Talal F. (2009) Diesel engine optimization for electric hybrid vehicles. Journal of Energy Resources Technology, 131 (1). 12203-1-12203-4. ISSN 0195-0738

Gill, N. Singh and Yousif, B. F. (2009) Wear and frictional performance of betelnut fibre-reinforced polyester composite. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (2). pp. 183-194. ISSN 1350-6501

Mai-Duy, Nam and Tran-Cong, Thanh (2009) An integrated-RBF technique based on Galerkin formulation for elliptic differential equations. Engineering Analysis with Boundary Elements, 33 (2). pp. 191-199. ISSN 0955-7997

Mai-Duy, Nam and See, Howard and Tran-Cong, Thanh (2009) A spectral collocation technique based on integrated Chebyshev polynomials for biharmonic problems in irregular domains. Applied Mathematical Modelling, 33 (1). pp. 284-299. ISSN 0307-904X

Rahimi, Hadi and Ghobadian, Barat and Yusaf, Talal and Najafi, Gholamhasan and Khatamifar, Mahdi (2009) Diesterol: an environment-friendly IC engine fuel. Renewable Energy, 34 (1). pp. 335-342. ISSN 0960-1481

Najafi, Gholamhassan and Yusaf, Talal (2009) Experimental investigation of using methanol-diesel blended fuels in diesel engine. In: 4th International Conference on Thermal Engineering Theory and Applications, 12-14 Jan 2009, Abu Dhabi, UAE.

Yousif, B. F. (2009) Frictional and wear performance of polyester composites based on coir fibres. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (1). 51 -59. ISSN 1350-6501

McIntyre, Timothy J. and Eichmann, Troy N. and Mallon, Michael and Potter, Daniel and Brandis, Aaron and Jacobs, Carolyn and Morgan, Richard and Jacobs, Peter and Buttsworth, David R. (2009) The generation and measurement of high temperature radiating flows in a high enthalpy pulsed facility. In: 3rd International Workshop on Radiation of High Temperature Gases in Atmospheric Entry, 30 Sep - 3 Oct 2008, Heraklion, Greece.

Mai-Duy, Nam and Tran-Cong, Thanh (2009) A Cartesian-grid discretisation scheme based on local integrated RBFNs for two-dimensional elliptic problems. CMES: Computer Modeling in Engineering and Sciences, 51 (3). pp. 213-238. ISSN 1526-1492

Ho-Minh, Dao and Mai-Duy, Nam and Tran-Cong, Thanh (2009) A Galerkin-RBF approach for the streamfunction-vorticity-temperature formulation of natural convection in 2D enclosured domains. CMES: Computer Modeling in Engineering and Sciences, 44 (3). pp. 219-248. ISSN 1526-1492

Malpress, Ray and Buttsworth, David R. (2009) Air motor for improved engine brake efficiency: design and preliminary experiments. In: ICEE 2009: 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability, 7-8 Dec 2009, Malacca, Malaysia.

Amir, Al-Falahi and Yusoff, M. Z. and Yusaf, T. (2009) An experimental evaluation of shock wave strength and peak pressure in a conventional shock tube and a free-piston compressor. In: IMECE 2008: ASME International Mechanical Engineering Congress and Exposition, 31 Oct-6 Nov 2008, Boston, MA, USA.

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2009) An improved quadrilateral flat element with drilling degrees of freedom for shell structural analysis. CMES: Computer Modeling in Engineering and Sciences, 49 (2). pp. 81-110. ISSN 1526-1492

Wandel, Andrew P. and Lindstedt, R. Peter (2009) Application of hybrid binomial Langevin-multiple mapping conditioning method to reacting jet flow. In: Australian Combustion Symposium 2009 (ACS09), 2-4 Dec 2009, Brisbane, Australia.

Islam, Md Mainul (2009) Behaviour of innovative fibre composite sandwich panels. In: Workshop on Life Cycle Assessment of Sustainable FRP Materials, 14 Dec 2009, Saitama, Japan. (Unpublished)

Epaarachchi, J. A. (2009) Change of dynamic response of pultruded composite components used in advanced composite structures due to fatigue and fracture. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Hasna, Abdallah M. (2009) Climate change, contemporary society and engineering practice: a sustainability journey. The International Journal of Climate Change: Impacts and Responses, 1 (4). pp. 139-150. ISSN 1835-7156

Hasna, Abdallah M. (2009) Contemporary society, technology and sustainability. International Journal of Technology, Knowledge and Society, 5 (1). pp. 13-20. ISSN 1832-3669

Buttsworth, David R. and Sercombe, David B. (2009) Cranz-Schardin visualisation of a hypersonic cone with gas injection. In: 28th International Congress on High-Speed Imaging and Photonics, 9-14 Nov 2008, Canberra, Australia.

Boh, Tjasa and Billingsley, John and Bradbeer, Robin and Hodgson, Paul (2009) Development of a multi-drive submersible platform for deep seabed research. In: OCEANS 2009: Balancing Technology with Future Needs, 11-14 May 2009, Bremen, Germany.

Schroll, Peter and Wandel, Andrew P. and Cant, R. Stewart and Mastorakos, E. (2009) Direct numerical simulations of autoignition in turbulent two-phase flows. Proceedings of the Combustion Institute, 32 (2). pp. 2275-2282. ISSN 1540-7489

Wandel, Andrew P. and Chakraborty, Nilanjan and Mastorakos, E. (2009) Direct numerical simulations of turbulent flame expansion in fine sprays. Proceedings of the Combustion Institute, 32 (2). pp. 2283-2290. ISSN 1540-7489

Sharifian, Ahmad and Buttsworth, David R. (2009) Direct radiation from wildfires through square woven screens. In: ASME 2008: Summer Heat Transfer Conference, 10-14 Aug 2008, Jacksonville, FL. USA.

Buttsworth, David R. and Saleh, Khalid and Yusaf, Talal (2009) Discrete particle simulation for the initial stages of ice accretion in aircraft engines: initial model development. In: 3rd International Conference on Energy and Environment (ICEE 2009), 7-8 December 2009, Malacca, Malaysia.

Epaarachchi, J. A. and Karunasena, W. and Aravinthan, T. (2009) Dynamic behavior of hybrid composite bridge girder. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Epaarachchi, Jayantha A. and Birt, Peter (2009) Dynamic behaviour of laterally loaded pultruted composite beams. In: 9th International Conference of the Mechanical and Physical Behaviour of Materials Under Dynamic Loading (DYMAT 2009), 7-11 Sept 2009, Brussels, Belgium.

Vandenbroucke, A. and Cardona, F. and Ku, H. and Rogers, D. (2009) Effects of chopped hemp on mechanical and thermal properties of epoxy resins. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

McCarthy, Alison and Hancock, Nigel and Raine, Steven R. (2009) Exploration of data requirements for adaptive control of irrigation scheduling. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Leonard, L. W. H. and Wong, K. J. and Low, K. O. and Yousif, B. F. (2009) Fracture behaviour of glass fibre-reinforced polyester composite. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 223 (2). pp. 83-89. ISSN 1464-4207

Wandel, Andrew P. and Lindstedt, R. Peter (2009) Hybrid binomial Langevin-multiple mapping conditioning modeling of a reacting mixing layer. Physics of Fluids, 21 (1). 015103-015116. ISSN 1070-6631

Mossad, Ruth and Vella, Anthony and Balusu, Rao (2009) Inertisation of highwall mining to control methane concentrations at the Moura mine. In: 7th International Conference on Computational Fluid Dynamics in the Minerals and Process Industries (CFD2009), 9-11 Dec 2009, Melbourne, Australia.

Venkatesh, V. C. and Yousif, B. F., eds. (2009) International Journal of Precision Technology, Vol. 1, No. 2, 2009. Inderscience Enterprises Ltd., United Kingdom.

Goh, Steven (2009) Is the current practice in engineering education a sustainable model for creating sustainability-trained engineers. In: SSEE 2009: Solutions for a Sustainable Planet, 22-24 Nov 2009, Melbourne, Australia.

Wang, Hao and Ning, Zhiliang and Liang, W. Z. and Cao, Fuyang and Sun, Jianfei (2009) Microstructure and properties of Mg-Nd-Zn-Zr alloys. In: 4th International Light Metals Technology Biennial Conference (LMT2009), 29 June - 1 July 2009, Gold Coast, Australia.

Mossad, Ruth and Yang, William and Schwarz, M. Philip (2009) Numerical prediction of air flow in a sharp 90 degree elbow. In: 7th International Conference on Computational Fluid Mechanics in the Minerals and Process Industries (CFD2009), 9-11 Dec 2009, Melbourne, Australia.

Mossad, R. R. (2009) Numerical predictions of air temperature and velocity to assist in the design of free ventilation piggeries. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2009) On the use of integrated radial basis function schemes in weighted residuals statements for elliptic problems. In: 31st International Conference on Boundary Elements and Other Mesh Reduction Methods (BEM/MRM 31), 2-4 Sep 2009, New Forest, UK.

Mossad, Ruth (2009) Optimization of the ventilation system for a forced ventilation piggery. Journal of Green Building, 4 (4). pp. 113-133. ISSN 1552-6100

Wen, Chin Chee and Yousif, B. F. (2009) Potential of kenaf fibres as reinforcement for tribological applications. Wear, 267 (9-10). pp. 1550-1557. ISSN 0043-1648

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao (2009) Preface to futures in mechanics of structures and materials conference. ACMSM20. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Hasna, Abdallah M. (2009) Sustainability and economic theory: an organism in premise. International Journal of Knowledge, Culture and Change Management, 9 (11). pp. 1-13. ISSN 1447-9524

Cardona, F. and Moscou, C. (2009) Synthesis and characterization of modified phenolic resins for composites with enhanced mechanical properties. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Yousif, B. F. and Nirmal, Singh Gill and Lau, Saijod T. W. and Devadas, Alvin (2009) The potential of using betelnut fibres for tribo-polyester composites considering three different orientations. In: ASME 2008 International Mechanical Engineering Congress and Exposition (IMECE2008), 31 Oct - 06 Nov 2008, Boston, Massachusetts, USA.

Pather, Selvan and Wang, Hao (2009) The use of simulated games in an undergraduate course manufacturing processes. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Yusaf, Talal and Najafi, Gholamhassan and Buttsworth, David R. (2009) Theoretical and experimental investigation of SI engine performance and exhaust emissions using ethanol-gasoline blended fuels. In: 3rd International Conference on Energy and Environment (ICEE2009), 7-8 December 2009, Malacca, Malaysia.

Hancock, Nigel and Pittaway, Pam and Symes, Troy (2009) Towards a biophysical understanding of observed performance of evaporation suppressant films applied to agricultural water storages - first analyses. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Brink, Gavin and Wandel, Andrew P. and Hancock, Nigel and Pather, Selvan (2009) Towards adaptive operational requirements for optimal application of evaporation-suppressing monolayer to reservoirs via a 'universal design framework'. In: IWER 2009: International Workshop on Evaporation from Reservoirs , 9-11 Dec 2009, Gold Coast, Australia.

Wandel, Andrew P. (2009) Utilising tablet PCs in tutorials to aid external students. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia .

2008

Lear, Foster Robert (2008) Hoist system for small boat stacker. [USQ Project] (Unpublished)

Goh, Steven (2008) A new paradigm for professional development framework and curriculum renewal in engineering management education: a proposal for reform. In: AaeE 2008: To Industry and Beyond, 07-10 Dec 2008, Yeppoon, Queensland, Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2008) A second-order continuity domain-decomposition technique based on integrated Chebyshev polynomials for two-dimensional elliptic problems. Applied Mathematical Modelling, 32 (12). pp. 2851-2862. ISSN 0307-904X

Goh, Steven C. and Coaker, Warren and Thorpe, David (2008) How engineers become CEOs: implications for education and training. Journal of Achievements in Materials and Manufacturing Engineering, 31 (2). pp. 846-852. ISSN 1734-8412

Ku, H. and Jacobson, W. and Trada, M. and Cardona, F. and Rogers, D. (2008) Tensile tests of phenol formaldehyde SLG reinforced composites: pilot study. Journal of Composite Materials, 42 (26). pp. 2783-2793. ISSN 0021-9983

Nguyen-Van, Hieu and Le, Thong and Mai-Duy, Nam and Tran-Cong, Thanh (2008) Nodal integration finite element techniques for analysis of piezoelectric solids. In: 2008 International Conference on Computational Solid Mechanics (CSM2008), 27-30 Nov 2008, Ho Chi Minh City, Vietnam.

Goh, Steven C. and Thorpe, David (2008) A reflection in the innovation and technology transfer experience in a regional micro-manufacturer: a case study. In: 9th Global Congress on Manufacturing & Management (GCMM2008), 12-14 Nov 2008, Surfers Paradise, Queensland, Australia.

Padda, Ranjit Singh (2008) Air flow through two layered mesh at varying porosity and spacing. [USQ Project] (Unpublished)

Mai-Duy, Nam and See, Howard and Tran-Cong, Thanh (2008) An integral-collocation-based fictitious-domain technique for solving elliptic problems. Communications in Numerical Methods in Engineering, 24 (11). pp. 1291-1314. ISSN 1069-8299

Goh, Steven C. and Coaker, Warren and Thorpe, David (2008) How engineers become CEOs: implications for education and training. In: 9th Global Congress on Manufacturing and Management (GCMM2008), 12-14 Nov 2008, Surfers Paradise, Queensland, Australia.

Walton, Joshua Graeme (2008) Investigation of a variable ride height suspension for an automobile. [USQ Project] (Unpublished)

Cleary, Edward Thomas (2008) Pulsed liquid jet for rock breaking. [USQ Project] (Unpublished)

Golshani, Aliakbar and Tran-Cong, Thanh and Buttsworth, David (2008) Impact on a water filled cylinder. In: ACMFMS 2008: Asian Conference on Mechanics of Functional Materials and Structures, 31 Oct-3 Nov 2008, Matsue, Japan.

Yavu, Isei Ledua (2008) Fracture toughness of phenolic resins composite by using saw dust as filler of percentage by weight. [USQ Project] (Unpublished)

Noor, M. M. and Kadirgama, K. and Devarajan, R. and Rejab, M. R. M. and Zuki, N. M. and Yusaf, Talal (2008) Development of a high pressure compressed natural gas mixer for a 1.5 litre CNG-diesel dual engine. In: National Conference on Design and Concurrent Engineering (DECON) 2008, 28-29 Oct 2008, Melaka Malaysia, Malaysia.

Mai-Duy, Nam and Tran-Cong, Thanh (2008) An efficient domain-decomposition pseudo-spectral method for solving elliptic differential equations. Communications in Numerical Methods in Engineering, 24 (10). pp. 795-806. ISSN 1069-8299

Strong, Simon James (2008) Design of a small wind turbine. [USQ Project] (Unpublished)

Sawchuk, Mike (2008) Flexural strength SLG-reinforced phenolic composites cured in microwaves. [USQ Project] (Unpublished)

Zhu, Z. W. and Zhang, H. F. and Wang, H. and Ding, B. Z. and Hu, Z. Q. (2008) Influence of casting temperature on the thermal stability of Cu- and Zr-based metallic glasses: theoretical analysis and experiments. Journal of Materials Research, 23 (10). pp. 2714-2719. ISSN 0884-2914

Cecil, Travis (2008) Investigate the best percentage by weight of glass powder, as fillers in phenolic resins using tensile tests. [USQ Project] (Unpublished)

Zong, Xuejin (2008) Investigation of the best percentage by weight of glass powder as fillers, in phenolic resins using flexural tests. [USQ Project] (Unpublished)

Nixon, Robert Jeffrey (2008) Investigation of the best percentage, by weight, of glass powder as filler in phenolic resin using three point bending test. [USQ Project] (Unpublished)

Salomon, David Scott (2008) Position control using a digital servo system. [USQ Project] (Unpublished)

Ku, H. and Cardona, F. and Ball, J. and Jacobson, W. and Trada, M. (2008) Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study. Journal of Composite Materials, 42 (19). pp. 2083-2095. ISSN 0021-9983

Lamari, Alfio Concetto (2008) Rolling stock bearing condition monitoring systems. [USQ Project] (Unpublished)

Shekhar, Shashi (2008) Tensile strength of sawdust reinforced phenolic resin composite materials. [USQ Project] (Unpublished)

Prasser, Nathan (2008) The development of a computer based system for the rehabilitation of arm movements of stroke patients. [USQ Project] (Unpublished)

Carden, Scott Benjamin (2008) The development of an antigravity arm to assist in the rehabilitation of stroke patients. [USQ Project] (Unpublished)

Kenna, Brian (2008) Water metering and revenue protection. [USQ Project] (Unpublished)

Mai-Duy, Nam and Tran-Cong, Thanh (2008) A multidomain integrated-radial-basis-function collocation method for elliptic problems. Numerical Methods for Partial Differential Equations, 24 (5). pp. 1301-1320. ISSN 0749-159X

Wai-Ming, Yeung (2008) Confirmation program of safety inspection of lift components (CPSI). [USQ Project] (Unpublished)

Amir, Al-Falahi and Yusoff, M. Z. and Yusaf, T. (2008) Numerical simulation of inviscid transient flows in shock tube and its validations. In: ICFM 2008: 5th International Conference on Fluid Mechanics, 12-14 Sep 2008, Heidelberg, Germany.

Mai-Duy, Nam and Le-Cao, Khoa and Tran-Cong, Thanh (2008) A Cartesian grid technique based on one-dimensional integrated radial basis function networks for natural convection in concentric annuli. International Journal for Numerical Methods in Fluids, 57 (12). pp. 1709-1730. ISSN 0271-2091

Ku, H. and Cardona, F. and Rogers, D. and Vandenbroucke, A. (2008) Effects of EPON on mechanical and thermal properties of epoxy resins. In: ICMMSE 2008: International Conference on Multifunctional Materials and Structures, 28-31 Jul 2008, Hong Kong.

Billingsley, John (2008) Innovative mechatronic technologies in horticultural systems. In: The 2008 National and Trans-Tasman Horticultural Science Conference, 21-23 July 2008, Surfers Paradise, Queensland. (Unpublished)

Goh, Steven C. and Thorpe, David (2008) An investigation into the innovation and technology transfer process in the SME sector within a university-industry collaboration context. Asian International Journal of Science and Technology in Production and Manufacturing, 1 (2). pp. 1-10. ISSN 1906-151X

Fu, H. M. and Zhang, H. F. and Wang, H. and Hu, Z. Q. (2008) Cu-based bulk amorphous alloy with larger glass-forming ability and supercooled liquid region. Journal of Alloys and Compounds, 458 (1-2). pp. 390-393. ISSN 0925-8388

Munoz, J.-C. and Ku, H. and Cardona, F. and Rogers, D. (2008) Effects of catalysts and post-curing conditions in the polymer network of epoxy and phenolic resins: preliminary results. Journal of Materials Processing Technology, 202 (1-3). pp. 486-492. ISSN 0924-0136

Nguyen-Van, H. and Mai-Duy, N. and Tran-Cong, T. (2008) Free vibration analysis of laminated plate/shell structures based on FSDT with a stabilized nodal-integrated quadrilateral element. Journal of Sound and Vibration, 313 (1-2). pp. 205-223. ISSN 0022-460X

Wang, H. and Estrin, Y. and Zuberova, Z. (2008) Bio-corrosion of a magnesium alloy with different processing histories. Materials Letters, 62 (16). pp. 2476-2479. ISSN 0167-577X

Yousif, B. F. (2008) Replacing of glass fibres with seed oil palm fibres for tribopolymeric composites. Tribology - Materials, Surfaces and Interfaces, 2 (2). pp. 99-103. ISSN 1751-5831

Billingsley, John (2008) Some agricultural applications of machine vision. In: 2008 IEEE International Conference on Robotics and Automation (ICRA 2008), 19-23 May 2008, Pasadena, California.

El-Tayeb, N. S. M. and Yousif, B. F. and Yap, T. C. (2008) An investigation on worn surfaces of chopped glass fibre reinforced polyester through SEM observations. Tribology International, 41 (5). pp. 331-340. ISSN 0301-679X

Fu, H. M. and Qiu, D. and Zhang, M. X. and Wang, H. and Kelly, P. M. and Taylor, J. A. (2008) The development of a new grain refiner for magnesium alloys using the edge-to-edge model. Journal of Alloys and Compounds, 456 (1-2). pp. 390-394. ISSN 0925-8388

Goh, Steven C. (2008) The engineering manager of the 21st century: implications for education and professional development [Keynote address]. In: CELM Victoria Seminar Series (March 2008), 12 Mar 2008, Melbourne, Australia. (Unpublished)

Amir, Al-Falahi and Yusoff, Mohd. Zamri bin and Yusaf, Talal (2008) Development of a short duration hypersonic test facility at Universiti Tenaga Nasional. Institution of Engineers, Malaysia. Journal, 69 (1). pp. 19-25. ISSN 0126-513X

Goh, S. and Ku, H. and Ang, S. L. (2008) Prediction of crushing stress in composite materials. Journal of Composite Materials, 42 (5). pp. 467-484. ISSN 0021-9983

Ku, Harry and Rogers, David and Davey, Robert and Cardona, Francisco and Trada, Mohan (2008) Fracture toughness of phenol formaldehyde composites: pilot study. Journal of Materials Engineering and Performance, 17 (1). pp. 85-90. ISSN 1059-9495

Ku, Harry S. and Yusaf, Talal (2008) Processing of composites using variable and fixed frequency microwave facilities. Progress in Electromagnetic Research B, PIERB 5 . pp. 185-205. ISSN 1937-6472

Ku, H. S. (2008) Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation. Journal of Electromagnetic Waves and Applications, 22 (1). pp. 69-84. ISSN 0920-5071

Yousif, B. F. and Tayeb, El and Yusaf, Talal (2008) Influence of material structure properties on sliding contact performance of CGRP composite. International Journal for Manufacturing Science and Technology, 10 (1). pp. 1-7. ISSN 1524-1548

Mai-Cao, L. and Tran-Cong, T. (2008) A meshless approach to capturing moving interfaces in passive transport problems. CMES: Computer Modeling in Engineering and Sciences, 31 (3). pp. 157-188. ISSN 1526-1492

Le, P. and Mai-Duy, N. and Tran-Cong, T. and Baker, G. (2008) A meshless modeling of dynamic strain localization in quasi-brittle materials using radial basis function networks. CMES: Computer Modeling in Engineering and Sciences, 25 (1). pp. 43-67. ISSN 1526-1492

Mai-Duy, N. and Tran-Cong, T. (2008) A meshless technique based on integrated radial basis function networks for elliptic partial differential equations. In: 4th International Workshop on Meshfree Methods for Partial Differential Equations, 17-20 Sep 2007, Bonn, Germany.

Mai-Duy, Nam and Tran-Cong, Thanh (2008) A multidomain integrated RBF collocation method for elliptic differential equations. In: 8th World Congress on Computational Mechanics (WCCM8), and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), 30 June - 4 July 2008, Venice, Italy.

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2008) A node-based element for analysis of planar piezoelectric structures. CMES: Computer Modeling in Engineering and Sciences, 36 (1). pp. 65-95. ISSN 1526-1492

Mai-Duy, Nam and Tran-Cong, Thanh (2008) A point-collocation method based on integrated Chebyshev polynomials for elliptic differential equations in irregular domains. In: 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), 30 June - 4 July 2008, Venice, Italy.

Hasna, Abdallah M. (2008) A review of sustainability assessment methods in engineering. The International Journal of Environmental, Cultural, Economic & Social Sustainability, 5 . ISSN 1832-2077

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2008) A smoothed four-node piezoelectric element for analysis of two-dimensional smart structures. CMES: Computer Modeling in Engineering and Sciences, 23 (3). pp. 209-222. ISSN 1526-1492

Chin, C. W. and Yousif, B. F. (2008) Adhesive and frictional behaviour of polymeric composites based on kenaf fibre. In: 2nd International Conference on Advanced Tribology (iCAT 2008), 3-5 Dec 2008, Singapore.

Danaelan, D. and Yousif, B. F. (2008) Adhesive wear performance of CFRP multilayered polyester composites under dry/wet contact conditions. Surface Review and Letters, 15 (6). pp. 919-925. ISSN 0218-625X

El-Tayeb, N. S. M. and Yousif, B. F. (2008) Adhesive wear performance of T-OPRP and UT-OPRP composites. Tribology Letters, 32 (3). pp. 199-208. ISSN 1023-8883

Mai-Duy, Nam and Tran-Cong, Thanh (2008) An effective high-order point-collocation numerical approach based on integrated approximants for elliptic differential equations. In: Alvarez, Matias P., (ed.) Leading-edge applied mathematical modeling research. Nova Science Publishers, Inc., New York, United States, pp. 215-250. ISBN 1-60021-977-2

Le, Phong and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2008) An IRBFN cartesian grid method based on displacement-stress formulation for 2D elasticity problems. In: 8th World Congress on Computational Mechanics (WCCM8) and ECCOMAS 2008, 30 June - 4 July 2008, Venice, Italy.

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2008) Analysis of piezoelectric solids with an efficient node-based element. In: 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), 30 June - 4 July 2008, Venice, Italy.

Cubero, Samuel N. (2008) Blind search inverse kinematics for controlling all types of serial-link robot arms. In: Billingsley, John and Bradbeer, Robin, (eds.) Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany, pp. 229-244. ISBN 978-3-540-74026-1

McCarthy, Alison and Hancock, Nigel and Raine, Steven R. (2008) Development of a simulation framework for variable-rate irrigation of cotton. In: 14th Australian Cotton Conference: New Beginnings – Cotton in a Climate of Change , 12-14 Aug 2008, Broadbeach, Qld, Australia.

Cubero, Samuel N. and Portlock, Joshua (2008) Dynamics and control of a VTOL quad-thrust aerial robot. In: Billingsley, John and Bradbeer, Robin, (eds.) Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany, pp. 27-40. ISBN 978-3-540-74026-1

Golshani, Aliakbar and Tran-Cong, Thanh (2008) Energy analysis of hydraulic fracturing. In: 12th International Conference of IACMAG, 1-6 Oct 2008, Goa, India.

Morgan, R. G. and McIntyre, T. J. and Buttsworth, D. R. and Jacobs, P. A. and Potter, D. F. and Brandis, A. M. and Gollan, R. J. and Jacobs, C. M. and Capra, B. R. and McGilvray, M. and Eichmann, T. N. (2008) Impulse facilities for the simulation of hypersonic radiating flows. In: 38th AIAA Fluid Dynamics Conference and Exhibit (AIAA 2008), 23-26 Jun 2008, Seattle, WA. United States.

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2008) Investigation of embedded near infrared fibre Bragg grating (FBG) sensors (830 nm) in structural health monitoring of glass fibre composite structures. In: OFS-19: 19th International Conference on Optical Fibre Sensors , 14-18 April 2008, Perth, Australia.

Wang, H. and Shi, Z. M. and Yang, K. (2008) Magnesium and magnesium alloys as degradable metallic biomaterials. In: FMST 2008: 4th International Conference on Frontiers in Materials Science and Technology, 26-28 Mar 2008, Brisbane, Australia.

Goh, Steven and Coaker, Warren and Bullen, Frank (2008) Management education for the 21st century engineering manager: an Australian perspective. In: FIE 2008: Racing Toward Innovation in Engineering Education , 22-25 Oct 2008, Saratoga Springs, NY, USA.

Billingsley, John and Bradbeer, Robin, eds. (2008) Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany. ISBN 978-3-540-74026-1

Billingsley, John (2008) More machine vision applications in the NCEA. In: Billingsley, John and Bradbeer, Robin, (eds.) Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany, pp. 333-343. ISBN 978-3-540-74026-1; 978-3-540-74027-8

Chee, Su Be and Al Shalabi, Ammar and Yousif, B. F. (2008) On the effect of counterface materials on tribo-behavior of steel wire sliding under dry contact condition. Surface Review and Letters, 15 (4). pp. 355-360. ISSN 0218-625X

Mai-Duy, Nam and Tran-Cong, Thanh (2008) On the use of integrated RBFs in Galerkin approximation for elliptic problems. In: BEM/MRM 30: 30th International Conference on Boundary Elements and Other Mesh Reduction Methods, 7-9 Jul 2008, Maribor, Slovenia.

McCarthy, Cheryl and Hancock, Nigel and Raine, Steven R. (2008) On-the-go machine vision sensing of cotton plant geometric parameters: first results. In: Billingsley, John and Bradbeer, Robin, (eds.) Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany, pp. 299-306. ISBN 978-3-540-74026-1; eISBN: 978-3-540-74027-8

Billingsley, John and Visala, Arto and Dunn, Mark (2008) Robotics in agriculture and forestry. In: Siciliano, Bruno and Khatib, Oussama, (eds.) Springer handbook of robotics. Springer-Verlag, Berlin, Germany, pp. 1065-1077. ISBN 978-3-540-23957-4

Li, Q. and Wang, Hao (2008) Solidification microstructure modelling using cellular automaton method. Advanced Materials Research, 32 . pp. 271-274. ISSN 1022-6680

Mai-Duy, Nam and Tran-Cong, Thanh (2008) Solving 2D biharmonic equations by the Galerkin approach using integrated radial basis function networks. In: 8th International Conference on Computational and Mathematical Methods in Science and Engineering (CMMSE-2008), 13-16 June 2008, Murcia, Spain.

Billingsley, John (2008) Viewpoint: Localisation. Sensor Review, 28 (2). ISSN 0260-2288

Tran, Canh-Dung and van der Heijden, G. H. M. and Phillips, David G. (2008) Application of topological conservation to model key features of zero-torque multi-ply yarns. Journal of the Textile Institute, 99 (4). pp. 325-337. ISSN 0040-5000

2007

Amir, Al-Falahi and Yusaf, T. and Yusoff, M. Z. (2007) Experimental and CFD study of the effects of design parameters on Reynolds number in a short duration hypersonic test facility. In: EPMESC X: Enhancement and Promotion of Computational Methods in Engineering and Science X, 21-23 Aug 2006, Sanya, China.

Dunn, Mark T. and Billingsley, John (2007) The use of machine vision for assessment of fodder quality. In: M2VIP 2007: 14th Annual Conference on Mechatronics and Machine Vision in Practice, 3-5 Dec 2007, Xiamen, China.

Billingsley, John (2007) Bovine intelligence for training horses. In: M2VIP 2007: 14th Annual Conference on Mechatronics and Machine Vision in Practice, 3-5 Dec 2007, Xiamen, China.

Billingsley, John (2007) Vision applications in agriculture. In: M2VIP 2007: 14th Annual Conference on Mechatronics and Machine Vision in Practice, 3-5 Dec 2007, Xiamen, China.

Ku, H. and Chan, W. L. and Trada, M. and Baddeley, D. (2007) An evaluation of fracture toughness of vinyl ester composites cured under microwave conditions. Journal of Materials Engineering and Performance, 16 (6). pp. 741-745. ISSN 1059-9495

Cardona, F. and Ku, H. and Pattarachaiyakoop, N. and Rogers, D. and Trada, M. (2007) Fracture toughness of phenol formaldehyde composites post-cured in microwaves. Journal of Electromagnetic Waves and Applications, 21 (14). pp. 2137-2146. ISSN 0920-5071

Goh, Steven (2007) 2020 VISION and its implication for engineering management education. In: AaeE 2007: 18th Annual Conference of the Australasian Association for Engineering Education, 9-13 Dec 2007, Melbourne, Australia.

Malpress, Ray and Buttsworth, David R. (2007) A new internal combustion engine configuration: opposed pistons with crank offset. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Sanathkumara, Kumarapelige N. and Cubero, Samuel N. (2007) Automated soil hardness testing machine. In: M2VIP 2007: 14th Annual Conference on Mechatronics and Machine Vision In Practice, 3-5 Dec 2007, Xiamen, China.

Sharifian, Ahmad and Buttsworth, David R. (2007) Computational simulation of the wind-force on metal meshes. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Buttsworth, D. R. and Davison, C. and MacLeod, J. D. and Strapp, J. W. (2007) Evaporator design for an isokinetic total water content probe in a naturally aspirating configuration. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Al-Falahi, Amir and Yusoff, M. Z. and Yusaf, T. (2007) Numerical and experimental study to evaluate the performance of Universiti Tenaga Nasional short duration hypersonic test facility. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2007) Solving partial differential equations with point collocation and one-dimensional integrated interpolation schemes. In: 14th International Conference on Computational & Experimental Engineering and Sciences, 1-3 Jan 2007, Miami, Florida, USA.

Khennane, Amar and Tran-Cong, Thanh (2007) Timoshenko beam-solution in terms of integrated radial basis functions. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

Malpress, Ray (2007) A new internal combustion engine configuration - opposed piston with crank offset. [USQ Project] (Unpublished)

Holzheimer, Carson Keith (2007) Automation of the rollingstock twist test. [USQ Project] (Unpublished)

Kleynhans, Claudius Justus (2007) Design and review of Millmerran coal handling plant. [USQ Project] (Unpublished)

Yok Meng, Tan (2007) Design of a microclimate ventilation system. [USQ Project] (Unpublished)

Parkin, Damion Ian Harcourt (2007) Design of a rear suspension configuration for a live axle race car to achieve optimum handling characteristics. [USQ Project] (Unpublished)

Hicks, Kevin Charles (2007) Design of aeration ploughing tool for poultry litter within shed to reduce odour generation. [USQ Project] (Unpublished)

Stewart, Robert (2007) Design of electro-hydraulic controlled poppet valves. [USQ Project] (Unpublished)

Thiess, Jeremy (2007) Development of a test frame to investigate the propagation of pressure waves generated by a thunderbolt hammer. [USQ Project] (Unpublished)

Jones, Bruce Thomas (2007) Dragline maintenance engineering. [USQ Project] (Unpublished)

Coaker, Warren (2007) How engineers become CEOs - implications for education and training. [USQ Project] (Unpublished)

Gustafson, Adrian Mark (2007) Investigation of a new generation degradable implant material. [USQ Project] (Unpublished)

Booshand, Peter John (2007) Literature review of advanced research and innovation in the mining industry. [USQ Project] (Unpublished)

Crowe, Daniel Leigh (2007) Management of physical assets at Purga Quarry. [USQ Project] (Unpublished)

El Komy, Ahmed (2007) Millmerran Power Station ROM coal blockage removal system. [USQ Project] (Unpublished)

Bichel, Daniel (2007) Optimisation of biodiesel stationary engine performance by modelling and simulating the running conditions. [USQ Project] (Unpublished)

Lefhoko, Mmitsi (2007) Power station operations Millmerran power station feed water dissolved oxygen control. [USQ Project] (Unpublished)

Sullivan, Steven Michael (2007) Research, design and develop a pipe latching/unlatching device that can be used to help automate the pipe tripping process. [USQ Project] (Unpublished)

Steyn, Marius (2007) Review and redesign of Pilbara Iron 24MTA conveyor system. [USQ Project] (Unpublished)

Lee, Wai Hung (2007) Shrinkage reduction of thermoset matrix particulate reinforced composites during hardening using low power microwave. [USQ Project] (Unpublished)

Wang, H. and Estrin, Y. and Fu, H. M. and Song, G. L. and Zuberova, Z. (2007) The effect of pre-processing and grain structure on the bio-corrosion and fatigue resistance of magnesium alloy AZ31. Advanced Engineering Materials, 9 (11). pp. 967-972. ISSN 1438-1656

Hansen, Luke (2007) The use of waste cooking oil as an alternative fuel for the diesel engine. [USQ Project] (Unpublished)

Davidson, Thomas Peter George (2007) Using tensile tests as benchmark, investigate the best percentage by weight of slg, as fillers, in Phenolic resins post-cured by microwaves. [USQ Project] (Unpublished)

Najafi, Bahman and Pirouzpanah, Vahab and Najafi, Gholamhassan and Yusaf, Talal and Ghobadian, Barat (2007) Experimental investigation of performance and emission parameters of a small diesel engine using CNG and biodiesel. In: 13th Small Engine Technology Conference 2007, 30 Oct - 01 Nov 2007, Toki Messe, Niigata, Japan.

Ku, Harry S. and Fulcher, Robert (2007) The process of updating engineering management science in an Australian regional university excellence in developing e-learning. European Journal of Engineering Education, 32 (5). pp. 527-538. ISSN 0304-3797

Weston, Bill Thomas (2007) Design and trial of an alternative option for suburban sewerage pump stations. [USQ Project] (Unpublished)

Sullivan, T. (2007) Embedded control system for biogas digesters. [USQ Project] (Unpublished)

Chow, Kai Wen (2007) Implications for engineers aspiring to become top-senior managers. [USQ Project] (Unpublished)

Mitchell, Andrew (2007) On-line equipment condition monitoring based maintenance. [USQ Project] (Unpublished)

Billingsley, John (2007) Industry and academe - which one holds the cutting edge? In: 9th Electrical Manufacturing Lecture, 19 Sept 2007, Brisbane, Australia. (Unpublished)

Ross, David and Ku, Harry S. (2007) Managing the delivery of 'Manufacturing Processes' in an Australian regional university known for excellence in e-learning. Delhi Institute of Advanced Studies Technology Review, 4 (1). pp. 46-54. ISSN 0972-9658

Mai-Duy, Nam and Tran-Cong, Thanh (2007) A Cartesian-grid collocation method based on radial-basis-function networks for solving PDEs in irregular domains. Numerical Methods for Partial Differential Equations, 23 (5). pp. 1192-1210. ISSN 0749-159X

Billingsley, John (2007) Climbing up the wall. In: 10th International Conference on Climbing and Walking Robots and the Supporting Technologies for Mobile Machines: CLAWAR 2007, 16-18 July 2007, Singapore.

Ning, Zhiliang and Cao, P. and Wang, Hao and Sun, Jianfei and Liu, Diankun (2007) Effect of cooling conditions on grain size of AZ91 alloy. Journal of Materials Science and Technology, 23 (5). pp. 645-649. ISSN 1005-0302

McLatchey, Graham and Billingsley, John (2007) Improving power to weight ratio of pneumatically powered legged robots. In: 10th International Conference on Climbing and Walking Robots and the Supporting Technologies for Mobile Machines: CLAWAR 2007, 16-18 July 2007, Singapore.

Wang, Hao (2007) In-situ Si/Al composite produced by semisolid metal processing. Materials and Manufacturing Processes, 22 (5-6). pp. 696-699. ISSN 1042-6914

Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2007) Tungsten fibre reinforced Zr-based bulk metallic glass composites. Materials and Manufacturing Processes, 22 (5-6). pp. 687-691. ISSN 1042-6914

Ning, Zhiliang and Wu, Peilian and Wang, Hao and Cao, Fuyang and Sun, Jianfei (2007) Effect of pouring temperature on thixotropic microstructure formation of AZ91. Rare Metals, 26 (S1). pp. 180-184. ISSN 1001-0521

Ku, Harry S. and Ang, Soh Fong and Snook, Chris and Baddeley, Douglas (2007) Micrographs of fractured vinyl ester composites. Journal of Reinforced Plastics and Composites, 26 (11). pp. 1111-1134. ISSN 0731-6844

Le, Phong and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2007) A meshless IRBFN-based numerical simulation of dynamic strain localization in quasi-brittle materials. In: USNCCM9: 9th US National Congress on Computational Mechanics , 22-26 Jul 2007, San Francisco, CA, United States.

McKie, Scott (2007) Development of a portable high-wall lighting system. [USQ Project] (Unpublished)

Ren, Yibin and Wang, Hao and Huang, Jingjing and Zhang, Bingchun and Yang, Ke (2007) Study of biodegradation of pure magnesium. In: ASBM7: 7th Asian Symposium on Biomedical Materials , 20-23 Aug 2006, Jeju, Korea.

Sharifian, Ahmad and Buttsworth, David R. (2007) Minimum safe standoff distance for protection from bushfire radiation by commercial metal meshes. In: 8th Australasian Heat and Mass Transfer Conference, 26-29 Jul 2005, Curtin University of Technology, Perth, Western Australia.

Sharifian, Ahmad and Watson, Stuart and Buttsworth, David R. and Barton, James (2007) Modelling the static thermal sensitivity of diaphragm-based fibre optic pressure sensors. In: 8th Australasian Heat and Mass Transfer Conference, 26-29 July 2005, Curtin University of Technology, Perth, Western Australia.

Hesse, Deike and Dunn, Mark and Billingsley, John and Withers, Kerry and Klingenspor, Martin and Rozman, Jan (2007) Strain specific differences in parameters of energy balance are related to the onset of diet-induced obesity in young male mice. In: 15th European Congress on Obesity, 22-25 Apr 2007, Budapest, Hungary.

Mai-Duy, Nam and Tanner, Roger I. (2007) A spectral collocation method based on integrated Chebyshev polynomials for two-dimensional biharmonic boundary-value problems. Journal of Computational and Applied Mathematics, 201 (1). pp. 30-47. ISSN 0377-0427

Mai-Duy, Nam and Mai-Cao, Lan and Tran-Cong, Thanh (2007) Computation of transient viscous flows using indirect radial basis function networks. CMES: Computer Modeling in Engineering and Sciences, 18 (1). pp. 59-78. ISSN 1526-1492

Ku, H. and Trada, M. and Puttgunta, V. C. (2007) Mechanical properties of vinyl ester composites cured by microwave irradiation: pilot study. Key Engineering Materials, 334-335 . pp. 537-540. ISSN 1013-9826

Yousif, B. F. and El-Tayeb, N. S. M. (2007) Tribological evaluations of polyester composites considering three orientations of CSM glass fibres using BOR machine. Applied Composite Materials, 14 (2). pp. 105-116. ISSN 1573-4897

Yusaf, Talal and Buttsworth, David R. (2007) Characterisation of mixing rate due to high power ultrasound. Ultrasonics Sonochemistry, 14 (2). pp. 266-274. ISSN 1350-4177

Sharifian, Ahmad and Buttsworth, David R. (2007) Evaluation of glued-diaphragm fibre optic pressure sensors in a shock tube. Shock Waves, 16 (3). pp. 189-197. ISSN 0938-1287

Bishop, Matthew Darrell (2007) Educational robot design. [USQ Project] (Unpublished)

Ng, K. C. and Yusoff, M. Z. and Yusaf, T. F. (2007) Numerical simulation of 3D transonic flow in a compressor rotor. International Journal of Modelling and Simulation, 27 (1). pp. 74-79. ISSN 0288-6203

Mai-Duy, N. and Tanner, R. I. (2007) A collocation method based on one-dimensional RBF interpolation scheme for solving PDEs. International Journal of Numerical Methods for Heat and Fluid Flow, 17 (2). pp. 165-186. ISSN 0961-5539

Cubero, Samuel and Tjoe, Donal (2007) A low cost vision-guided car for autonomous racing car competitions. In: M2VIP 2005: 12th Annual Conference on Mechatronics and Machine Vision in Practice, 29 Nov-1 Dec 2005, Manila, Philippines.

Le, Phong and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2007) A numerical study of strain localization in elasto-thermo-viscoplastic materials using radial basis function networks. Computers, Materials and Continua, 5 (2). pp. 129-150. ISSN 1546-2218

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2007) A practical thermodynamic method to calculate the best glass-forming composition for bulk metallic glasses. International Journal of Nonlinear Sciences and Numerical Simulation, 8 (2). pp. 171-178. ISSN 1565-1339

Mai-Duy, Nam and Tran-Cong, Thanh (2007) A RBF-based fictitious-domain technique for Dirichlet boundary value problems in multiply-connected domains. In: 3rd Asian-Pacific Congress on Computational Mechanics (APCOM'07) and EPMESC XI, 3-6 Dec 2007, Kyoto, Japan.

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2007) A simple and accurate four-node quadrilateral element using stabilized nodal integration for laminated plates. CMC: Computers, Materials and Continua, 6 (3). pp. 159-176. ISSN 1546-2218

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2007) An investigation of the response of embedded near infrared fibre bragg grating (FBG) sensors (830nm) in glass fibre composites under fatigue loading. In: 14th International Conference on Composite Structures (ICCS 14), 19-21 Nov 2007, Melbourne, Australia.

Yousif, B. F. and Jye, W. K. and El-Tayeb, N. S. M. (2007) An investigation on tensile, compression and flexural properties of natural fibre reinforced polyester composites. In: ASME 2007 International Mechanical Engineering Congress and Exposition (IMECE2007), 11-15 Nov 2007, Seattle, Washington, USA.

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2007) Analysis of laminated composite plate/shell structures using a stabilized nodal-integrated quadrilateral element. In: 1st International Conference on Modern Design, Construction & Maintenance of Structures, 10-11 Dec 2007, Hanoi, Vietnam.

Ho-Minh, Dao and Mai-Duy, Nam and Tran-Cong, Thanh (2007) Analysis of viscoelastic flow by a radial basis function networks method. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Dunn, Mark (2007) Applications of vision sensing in agriculture. [Thesis (_PhD/Research)] (Unpublished)

Najafi, Gholamhassan and Ghobadian, Barat and Yusaf, Talal and Rahimi, Hadi (2007) Combustion analysis of a CI engine performance using waste cooking biodiesel fuel with an artificial neural network aid. American Journal of Applied Sciences, 4 (10). pp. 756-764. ISSN 1546-9239

Mai-Duy, Nam and Khennane, Amar and Tran-Cong, Thanh (2007) Computation of laminated composite plates using integrated radial basis function networks. CMC: Computers, Materials and Continua, 5 (1). pp. 63-77. ISSN 1546-2218

Churches, Alex and Green, Cliff and Field, Bruce and Wightley, Allan and Green, Lance and van de Loo, Paul and Burvill, Colin and Smith, Warren and Snook, Chris (2007) Creating tomorrow's engineering designers. In: ConnectED 2007: International Conference on Design Education, 9-12 July, 2007, Sydney, Australia.

Wang, Hao and Fu, Huameng (2007) Development of bulk metallic glass composites. In: Fan, Cang, (ed.) The world of bulk metallic glasses and their composites. Research Signpost, Kerala, India, pp. 73-92. ISBN 978-81-308-0196-4

Yousif, B. F. and El-Tayeb, N. S. M. (2007) Effect of water as lubricant on friction and wear properties of CGRP composite evaluated by POD and BOR techniques. Surface Review and Letters, 14 (2). pp. 185-191. ISSN 0218-625X

El-Tayeb, N. S. M. and Yousif, B. F. (2007) Evaluation of glass fiber reinforced polyester composite for multi-pass abrasive wear applications. Wear, 262 (9-10). pp. 1140-1151. ISSN 0043-1648

Craig, Ian and Aravinthan, Vasantha and Baillie, Craig Peter and Beswick, Alan and Barnes, Geoff and Bradbury, Ron and Connell, Luke and Cooper, Paul and Fellows, Christopher and Fitzmaurice, Li and Foley, Joseph P. and Hancock, Nigel and Lamb, David and Morrison, Pippa and Mossad, Ruth and Misra, R. K. and Pittaway, Pam and Prime, Emma and Rees, Steve and Schmidt, Erik and Solomon, David and Symes, Troy and Turnbull, David (2007) Evaporation, seepage and water quality management in storage dams: a review of research methods. Environmental Health, 7 (3). pp. 84-97. ISSN 1444-5212

Epaarachchi, Jayantha A. and Karunasena, Warna and Aravinthan, Thiru (2007) Investigation of dynamic behaviour of a hybrid composite bridge girder. In: 14th International Conference on Composite Structures (ICCS 14), 19 - 21 Nov 2007, Melbourne, Australia.

Epaarachchi, Jayantha A. and Clegg, Richard E. and Canning, John (2007) Investigation of the use of near infrared FBG (830nm) sensors for monitoring the structural response of 0/90 woven cloth/CSM glass fibre/vynylester composite under static and fatigue loading. In: HUMS 2007: 5th DSTO International Conference on Health and Usage Monitoring , 19-22 Mar 2007, Melbourne, Australia.

Wang, Hao and Ning, Zhiliang (2007) Magnesium thixotropic structure produced by controlled nucleation method. Tezhong Zhuzao Ji Youse Hejin (Special Casting and Nonferrous Alloys) (Sp. Iss.). pp. 316-319. ISSN 1001-2249

Fu, H. M. and Zhang, H. F. and Wang, Hao and Hu, Z. Q. (2007) Multifarious fracture features of CuZrAlGd(Ag) bulk metallic glasses. Advanced Materials Research, 29-30 . pp. 47-50. ISSN 1022-6680

Yousif, B. F. and El-Tayeb, N. S. M. (2007) On the effect of woven glass fabric orientations on wear and friction properties of polyester composite. Surface Review and Letters, 14 (3). pp. 489-497. ISSN 0218-625X

Le-Cao, Khoa and Mai-Duy, Nam and Tran-Cong, Thanh (2007) Radial-basis-function calculations of buoyancy-driven flow in concentric and eccentric annuli. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Yousif, B. F. and El-Tayeb, N. S. M. (2007) The effect of oil palm fibers as reinforcement on tribological performance of polyester composite. Surface Review and Letters, 14 (6). pp. 1095-1102. ISSN 0218-625X

Ku, H. and Trada, M. and Puttgunta, V. C. and Kota, V. (2007) Yield and tensile strength of vinyl ester composites cured by microwaves. Journal of Electromagnetic Waves and Applications, 21 (4). pp. 517-526. ISSN 0920-5071

2006

Mai-Cao, L. and Tran-Cong, T. (2006) A meshless level-set scheme for interfacial flows. In: 2006 International Conference on Nonlinear Analysis & Engineering Mechanics Today, 11-14 Dec 2006, Ho Chi Minh City, Vietnam.

Golshani, Aliakbar and Tran-Cong, Thanh (2006) Modelling a borehole subjected to fluid pressure. In: 2006 International Conference on Nonlinear Analysis & Engineering Mechanics Today, 11-14 Dec 2006, Ho Chi Minh City, Vietnam.

Fulcher, Robert and Snook, Chris (2006) Problem based learning in system design teams. In: AaeE 2006: 17th Annual Conference of the Australasian Association for Engineering Education, 10-13 Dec 2006, Auckland, New Zealand.

Billingsley, John (2006) More machine vision applications in the NCEA. In: 13th Annual Conference on Mechatronics and Machine Vision in Practice, 5-7 Dec 2006, Toowoomba, Australia.

Mai-Duy, N. and Tran-Cong, T. and Tanner, R. I. (2006) A new high-order time-kernel BIEM for the Burgers equation. CMES: Computer Modeling in Engineering and Sciences, 16 (3). pp. 177-186. ISSN 1526-1492

Al-Abdeli, Yasir and Bullen, Frank (2006) Connecting teaching and research through problem based learning in thermal and automotive engineering. In: AaeE 2006: 17th Annual Conference of the Australasian Association for Engineering Education, 10-13 Dec 2006, Auckland, New Zealand.

Grassick, Bruce (2006) Design and construction of a solar collector for teaching purposes. [USQ Project] (Unpublished)

Cubero, Sam, ed. (2006) Industrial robotics: theory, modelling and control. Pro Literatur Verlag, Mammendorf, Germany. ISBN 3-86611-285-8

Nguyen-Van, Hieu and Khennane, Amar and Tran-Cong, Thanh (2006) Monte-Carlo simulation of the durability of glass fibre reinforced composite under environmental stress corrosion. In: 2006 International Conference on Nonlinear Analysis & Engineering Mechanics Today, 11-14 Dec 2006, Ho Chi Minh City, Vietnam.

Ku, Harry S. (2006) Productivity improvement of composites processing through the use of industrial microwave technologies. Progress in Electromagnetics Research (PIER), PIER 66 . pp. 267-285. ISSN 1559-8985

Bullen, Frank and Wood, David (2006) The construction of undergraduate student engineering design teams using the MTBI and Belbin Test. In: AaeE 2006: 17th Annual Conference of the Australasian Association for Engineering Education, 10-13 Dec 2006, Auckland, New Zealand.

Chan, Siew-Yuen (2006) Water leakage detection circuit in external chiller unit. [USQ Project] (Unpublished)

Leong, Suet-Leong (2006) Managing product development process for time market. [USQ Project] (Unpublished)

Partridge, Toni Leigh (2006) Automation of a load-haul-dump (LHD) unit. [USQ Project] (Unpublished)

Mokonopi, Kealeboga (2006) Balancing a two wheeled robot. [USQ Project] (Unpublished)

Davey, Robert James (2006) Best percentage by weight of micro-spheres as fillers in phenolic resins, with fracture toughness as a benchmark. [USQ Project] (Unpublished)

Gurney, Richard Noel (2006) Best percentage weight of microspheres as fillers in resin using three-point bending test. [USQ Project] (Unpublished)

Armstead, Jared Kenneth (2006) Chassis development for the formula SAE racer. [USQ Project] (Unpublished)

Napper, Bryce (2006) Computational fluid dynamics (CFD) investigation of the thermal efficiency of micro climate conditioning of a typical workstation. [USQ Project] (Unpublished)

Inderbitzin, Martin David (2006) Design review and analysis of Collinsville power station coal handling plant. [USQ Project] (Unpublished)

Whittred, Daniel (2006) Developing a monitoring and control system for irrigation pumping units. [USQ Project] (Unpublished)

Hayllor, Nicholas (2006) Development of a low cost GPS guidance system for use in agriculture. [USQ Project] (Unpublished)

Tinning, Eugene (2006) Field deployable shower unit by dual membrane filtration. [USQ Project] (Unpublished)

Chan, Wooi Lieh (2006) Fracture analysis of vinyl ester composites cured under microwave conditions. [USQ Project] (Unpublished)

Janusaitis, Stephen (2006) Impact response of flat and perforated plate. [USQ Project] (Unpublished)

Morgan, R. G. and McIntyre, T. J. and Jacobs, P. A. and Buttsworth, D. R. and Macrossan, M. N. and Gollan, R. J. and Capra, B. R. and Brandis, A. M. and Potter, D. and Eichmann, T. and Jacobs, C. M. and McGilvray, M. and Van Diem, D. and Scott, M. P. (2006) Impulse facility simulation of hypervelocity radiating flows. In: 2nd International Workshop on Radiation of High Temperature Gases in Atmospheric Entry, 6-8 Sep 2006, Rome, Italy.

Ler, Eng Loo (2006) Intelligent building automation system. [USQ Project] (Unpublished)

Free, Matthew (2006) Mobile manoeuvring robot. [USQ Project] (Unpublished)

Ang, Soon Lim (2006) Predicting the crushing stress of composite materials. [USQ Project] (Unpublished)

McCarthy, Alison (2006) Telemetry and communication systems for irrigation management. [USQ Project] (Unpublished)

Kruger, Scott (2006) The design and optimisation of a prototype sailplane. [USQ Project] (Unpublished)

Clarke, Daniel John (2006) The design of a three point linkage implement height control system. [USQ Project] (Unpublished)

Vella, Anthony (2006) Ventilation of highwall mining to control methane concentration at the Moura Mine. [USQ Project] (Unpublished)

Mai-Duy, N. and Tran-Cong, T. and Tanner, R. I. (2006) A domain-type boundary-integral-equation method for two-dimensional biharmonic Dirichlet problem. Engineering Analysis with Boundary Elements, 30 (10). pp. 809-817. ISSN 0955-7997

He, Mingqian Belinda (2006) Analysis of the recycling method for aluminum soda cans. [USQ Project] (Unpublished)

Treverrow, Daniel (2006) Comparison of injury criteria for human head impacts. [USQ Project] (Unpublished)

Tuxford, Andrew (2006) Numerical analysis of a closed face impeller. [USQ Project] (Unpublished)

Freeman, Barry (2006) Steering system and suspension design for a formula SAE-A racer. [USQ Project] (Unpublished)

Gribble, Brett (2006) Stress relieving furnace modelling and analysis. [USQ Project] (Unpublished)

Smith, Barton James (2006) System design for formula SAE-A racecar. [USQ Project] (Unpublished)

Epaarachchi, Jayantha A. (2006) Assessment of damage accumulation in glass fibre reinforced plastic (GFRP) composites under spectrum fatigue loading. In: 2006 International Conference on Structural Integrity and Failure (SIF2006), 27-29 Sept 2006, Sydney, Australia.

Epaarachchi, Jayantha A. (2006) A study of estimation of damage accumulation of glass fibre reinforce plastic (GFRP) composites under a block loading situation. Composite Structures, 75 (1-4). pp. 88-92. ISSN 0263-8223

Epaarachchi, Jayantha A. and Clegg, Richard (2006) An experimental investigation of the properties of cross-ply laminate used for manufacturing of small aircraft components. Composite Structures, 75 (1-4). pp. 93-99. ISSN 0263-8223

Hamid, H. A. and Yusaf, T. and Yusof, Z. M. (2006) An investigation on the improvement of the operation of Tenom Pangi HPP cooling power system. In: International Conference on Energy and Environment 2006 (ICEE 2006), 28-30 Aug 2006, Kajang, Malaysia.

Epaarachchi, Jayantha A. (2006) Effects of static-fatigue (tension) on the tension-tension fatigue life of glass fibre reinforced plastic composites. Composite Structures, 74 (4). pp. 419-425. ISSN 0263-8223

Muhamad, Hussein and Salamn, Y. and Yusaf, Talal (2006) Experimental investigation of free convection heat transfer with restriction placed at top of a vertical circular tube. In: 8th Biennial ASME Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Italy.

Muhamad, Hussein and Yusaf, Talal (2006) Heat transfer by mixed convection opposing laminar flow from the inside surface of uniformly heated inclined circular tube. In: 8th Biennial ASME Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Italy.

Yousif, B. F. and El-Tayeb, N. S. M. and Yusaf, Talal (2006) The effects of load and velocity on friction and interface temperature of CGRP sliding against smooth stainless steel. In: 8th Biennial ASME Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Italy.

Goozee, R. J. and Jacobs, P. A. and Buttsworth, D. R. (2006) Simulation of a complete reflected shock tunnel showing a vortex mechanism for flow contamination. Shock Waves, 15 (3-4). pp. 165-176. ISSN 0938-1287

Mai-Duy, Nam (2006) An effective spectral collocation method for the direct solution of high-order ODEs. Communications in Numerical Methods in Engineering, 22 (6). pp. 627-642. ISSN 1069-8299

Ku, Harry S. and Chia, Wee Chong (2006) Design of multi-purpose carbide end mill. Institution of Engineers, Malaysia. Journal, 67 (2). pp. 34-40. ISSN 0126-513X

Fu, H. M. and Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2006) In situ TiB-reinforced cu-based bulk metallic glass composites. Scripta Materialia, 54 (11). pp. 1961-1966. ISSN 1359-6462

Wang, Hao and Zhang, M. X. and Shi, Z. M. and Yang, Ke (2006) Biocorrosion behaviour of magnesium alloys under pseudo-physiological conditions. Tissue Engineering, 12 (4). p. 1067. ISSN 1076-3279

Lee, Kuang Sheng (2006) Experimental study of the mechanical properties of particulate reinforced composite. [USQ Project] (Unpublished)

Yao, X. D. and Wu, C. Z. and Wang, Hao and Cheng, H. M. and Lu, G. Q. (2006) Effects of carbon nanotubes and metal catalysts on hydrogen storage in magnesium nanocomposite. Journal of Nanoscience and Nanotechnology, 6 (2). pp. 494-498. ISSN 1533-4880

Mai-Duy, N. and Tran-Cong, T. (2006) Solving biharmonic problems with scattered-point discretization using indirect radial-basis-function networks. Engineering Analysis With Boundary Elements, 30 (2). pp. 77-87. ISSN 0955-7997

Massaro, Aaron (2006) The effect of water ratio on the mechanical properties of refactory materials. [USQ Project] (Unpublished)

Mai-Duy, Nam and Tran-Cong, Thanh and Tanner, R. I. (2006) A high-order time-kernel BIEM for the Burgers equation. In: International Conference on Boundary Element Techniques VII, 4-6 September 2006, Paris, France.

Le, Phong and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2006) A meshless IRBFN-based numerical simulation of adiabatic shear band formation in one dimension. In: 2006 International Conference on Nonlinear Analysis & Engineering Mechanics Today, 11-14 Dec 2006, Ho Chi Minh City, Vietnam.

Golshani, Aliakbar and Okui, Yoshiaki and Oda, Masanobu and Takemura, Takato (2006) A micromechanical model for brittle failure of rock and its relation to crack growth observed in trixial compression tests of granite. Mechanics of Materials, 38 (4). pp. 287-303. ISSN 0167-6636

Mai-Duy, N. and Mai-Cao, L. and Tran-Cong, T. (2006) A new meshless RBF-based method for unsteady fluid flow analysis. In: Sladek, Jan and Sladek, Vladimir, (eds.) Advances in meshless methods. Tech Science Press, USA, pp. 241-262. ISBN 0-9717880-2-2

Zakaria, S. and Yusaf, T. and Yusoff, M. Z. (2006) Flow and transient heat transfer in a high speed free piston tunnel: CFD simulations on turbulent and laminar flow conditions. In: 2nd International Conference on Thermal Engineering Theory and Applications (ICTEA '06), 3-6 Jan 2006, Al Ain, United Arab Emirates.

McLatchey, Graham and Billingsley, John (2006) Force and position control using pneumatic cylinders. In: 9th International Conference on Climbing and Walking Robots: CLAWAR 2006, 12-14 Sept 2006, Brussels, Belgium.

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2006) In-situ Cu-based bulk metallic glass composite. International Journal of Modern Physics B, 20 (25-27). pp. 3963-3968. ISSN 0217-9792

Yao, X. and Wang, H. (2006) Modeling of semisolid structure formation in controlled nucleation method. International Journal of Modern Physics B, 20 (25-27). pp. 4123-4128. ISSN 0217-9792

Yao, X. and Wang, H. and He, B. and Zhou, X. (2006) Numerical simulation of dendrite growth during solidification. International Journal of Nonlinear Sciences and Numerical Simulation, 7 (2). pp. 171-176. ISSN 1565-1339

Ku, Harry S. and Tsang, Shing Hin and Baddeley, Douglas and Snook, Chris (2006) Short bar tests for vinyl ester particulate reinforced composites cured by microwaves. Australian Journal of Structural Engineering, 7 (1). pp. 65-73. ISSN 1328-7982

Epaarachchi, Jayantha A. and Clausen, Philip D. (2006) The development of a fatigue loading spectrum for small wind turbine blades. Journal of Wind Engineering and Industrial Aerodynamics, 94 . pp. 207-223. ISSN 0167-6105

Amir, Al-Falahi and Yusaf, T. and Yusoff, M. Z. (2006) Universiti Tenaga Nasional short duration hypersonic test facility: calibration and verification. In: 8th Biennial ASME Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Torino, Italy.

Finch, N. A. and Murray, P. J. and Dunn, M. T. and Billingsley, J. (2006) Using machine vision classification to control access of animals to water. Animal Production Science, 46 (6-7). pp. 837-839. ISSN 0816-1089

Billingsley, John and Dunn, Mark and Bell, David (2006) Vision based macadamia yield assessment. Sensor Review, 26 (4). pp. 312-317. ISSN 0260-2288

Ku, Harry S. and Puttgunta, V. C. and Trada, Mohan (2006) Young's modulus of vinyl ester composites cured by microwave irradiation: preliminary results. Journal of Electromagnetic Waves and Applications, 20 (14). pp. 1911-1924. ISSN 0920-5071

Liu, Hong-Yuan and Yan, Wenyi and Mai, Yiu-Wing (2006) Z-pin bridging in composite laminates and some related problems. In: ACAM 2005: Australasian Congress on Applied Mechanics, 16-18 Feb 2005, Melbourne, Australia.

Tran, Canh-Dung and van der Heijden, G. H. M. and Phillips, David G. (2006) Issues in processing unstable twisted fibre assemblies. In: 4th International Industrial Simulation Conference (ISC 2006), 5-7 Jun 2006, Palermo, Italy.

2005

Wandel, Andrew P. and Klimenko, Alexander Y. (2005) Testing multiple mapping conditioning mixing for Monte Carlo probability density function simulations. Physics of Fluids, 17 (12). pp. 128105-1. ISSN 1070-6631

Campbell, Nicholas (2005) Analysing the effect of speed variation on irrigation efficiency in travelling irrigators. [USQ Project] (Unpublished)

Ren, Yibin and Huang, Jingjing and Yang, Ke and Zhang, Bingchun and Yao, Zhiming and Wang, Hao (2005) Study of bio-corrosion of pure magnesium. Acta Metallurgica Sinica (Jinshu Xuebao), 41 (11). pp. 1228-1232. ISSN 0412-1961

Grant, Robert Kenneth (2005) A study of the ground and vegetation effects on the propagation of road traffic noise in south east Queensland. [USQ Project] (Unpublished)

Janke, Scott (2005) Analysis of a sheet metal bucket elevator head. [USQ Project] (Unpublished)

Luckemeyer, Nils (2005) Assisted standing and walking mode for Robug IV eight legged robot. [USQ Project] (Unpublished)

O'Neil, Anthony M. (2005) Chassis design for SAE racer. [USQ Project] (Unpublished)

Wong, Wei Loon (2005) Compressed natural gas as an alternative fuel in diesel engines. [USQ Project] (Unpublished)

Chan, Teck Wai Alan (2005) Computational fluid dynamics (CFD): investigation for improving pigs' housing design. [USQ Project] (Unpublished)

Outschoorn, Jeremy Paul (2005) Computational fluid mechanics investigation of ventilation aboard a livestock vessel. [USQ Project] (Unpublished)

Ali, Noorahmad Bin (2005) Corrosion in the boiler tubes of the Tuas South Incineration Plant, Singapore. [USQ Project] (Unpublished)

Harber, Matthew (2005) Development of a drivetrain system for a formula SAE-A race car. [USQ Project] (Unpublished)

Domrow, Ryan (2005) Development of a mechanical testing system to investigate road deformation. [USQ Project] (Unpublished)

Plank, Melinda (2005) Engine optimisation and performance characteristics for a formula SAE race car. [USQ Project] (Unpublished)

Yap, Lee Jiuan (2005) Evaluation of wet scrubber systems. [USQ Project] (Unpublished)

Chuah, Yew Pin (2005) Evolutionary structural optimization for multi component structural systems. [USQ Project] (Unpublished)

Gillies, Ross Donald (2005) Investigation into the non-invasive monitoring of blood glucose levels in people with diabetes. [USQ Project] (Unpublished)

Ng, Hai Ching (2005) Investigation of tenable carbon monoxide and visibility level for a fired room. [USQ Project] (Unpublished)

Teo, Chin Teng (2005) Lifting mechanism of wheelchair. [USQ Project] (Unpublished)

Airs, Leslie (2005) Mobile robot guidance and navigation. [USQ Project] (Unpublished)

Dyke, Geoffrey Wayne (2005) Optimising condenser air extraction to reduce greenhouse gas emissions at the Loy Yang B power station. [USQ Project] (Unpublished)

Popa, Cristina Elena (2005) Steering system and suspension design for 2005 formula SAE-A car. [USQ Project] (Unpublished)

Field, Benjamin J. (2005) Stress analysis of axially loaded perforated steel plates by experimental and finite element methods. [USQ Project] (Unpublished)

French, Vivienne Joyce (2005) The investigation into modes of failure of total hip replacements. [USQ Project] (Unpublished)

Ku, Harry S. and Cheng, Y. M. and Snook, Chris and Baddeley, Douglas (2005) Drop weight impact test fracture of vinyl ester composites: micrographs of pilot study. Journal of Composite Materials, 39 (18). pp. 1607-1620. ISSN 0021-9983

Mai-Duy, N. and Tanner, R. I. (2005) Computing non-Newtonian fluid flow with radial basis function networks. International Journal for Numerical Methods in Fluids, 48 (12). pp. 1309-1336. ISSN 0271-2091

Yusaf, T. F. and Yusoff, M. Z. and Hussein, I. and Fong, S. H. (2005) A quasi one-dimensional simulation of a 4 stroke spark ignition hydrogen fuelled engine. American Journal of Applied Sciences, 2 (8). pp. 1206-1212. ISSN 1546-9239

Mai-Duy, N. and Tanner, R. I. (2005) Solving high-order partial differential equations with indirect radial basis function networks. International Journal for Numerical Methods in Engineering, 63 (11). pp. 1636-1654. ISSN 0029-5981

Mai-Duy, Nam and Tran-Cong, Thanh (2005) An efficient indirect RBFN-based method for numerical solution of PDEs. Numerical Methods for Partial Differential Equations, 21 (4). pp. 770-790. ISSN 0749-159X

Buttsworth, David R. and Stevens, Robert and Stone, C. Richard (2005) Eroding ribbon thermocouples: impulse response and transient heat flux analysis. Measurement Science and Technology, 16 (7). pp. 1487-1494. ISSN 0957-0233

Wang, Hao (2005) Bulk metallic glass composites. Journal of Materials Science and Technology, 21 (s1). pp. 86-90. ISSN 1005-0302

Abdullah, Shahrir and Yousif, B. F. and Sopian, Kamaruzzaman (2005) Design consideration of low temperature differential double-acting Stirling engine for solar application. Renewable Energy, 30 (1). pp. 1923-1941. ISSN 0960-1481

El-Tayeb, N. S. M. and Yousif, B. F. and Yap, T. C. (2005) Tribological studies of polyester reinforced with CSM 450-R-glass fiber sliding against smooth stainless steel counterface. Wear, 261 (3-4). pp. 443-452. ISSN 0043-1648

Mai-Duy, N. and Tanner, R. I. (2005) An effective high order interpolation scheme in BIEMs for biharmonic boundary value problems. Engineering Analysis with Boundary Elements, 29 (3). pp. 210-223. ISSN 0955-7997

Eagle, Michael Allan (2005) Numerical investigation of the thermal efficiency of glass refrigeration doors. [USQ Project] (Unpublished)

Epaarachchi, Jayantha A. (2005) Effects of static fatigue on the tension-tension fatigue life of glass / polyester composites. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005): Advances in Applied Mechanics, 16-18 Feb 2005, Melbourne, Australia.

Yan, Wenyi (2005) Mechanics examination on the wear behaviour of shape memory alloys. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005): Advances in Applied Mechanics, 16-18 Feb 2005, Melbourne, Australia.

Mai-Duy, Nam (2005) Solving high order ordinary differential equations with radial basis function networks. International Journal for Numerical Methods in Engineering, 62 (6). pp. 824-852. ISSN 0029-5981

Woolf, Rodney J. (2005) Data mining using Matlab. [USQ Project] (Unpublished)

Lim, Doou Gie (2005) Design and development of a conveyor system for semiconductor industry. [USQ Project] (Unpublished)

Wong, Teck Shim (2005) Jigs for checking machine alignment. [USQ Project] (Unpublished)

Lim, Chun Hao (2005) Replacement of chiller system of a terminal building. [USQ Project] (Unpublished)

Chia, Wee Chong (2005) Research and development of multi purpose carbide end mill. [USQ Project] (Unpublished)

Mai-Cao, L. and Tran-Cong, T. (2005) A meshless IRBFN-based method for transient problems. CMES: Computer Modeling in Engineering and Sciences, 7 (2). pp. 149-171. ISSN 1526-1492

Ku, Harry S. and Siores, Elias and Ball, James A. R. (2005) Application of variable frequency microwave (VFM) to adhesives. Journal of Electromagnetic Waves and Applications, 19 (11). pp. 1467-1484. ISSN 0920-5071

Ku, Harry S. (2005) Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation. Journal of Reinforced Plastics and Composites, 24 (10). pp. 1035-1049. ISSN 0731-6844

Ku, Harry S. and Baddeley, Douglas and Snook, Chris and Chew, C. S. (2005) Fracture toughness of vinyl ester composites cured by microwave irradiation: preliminary results. Journal of Reinforced Plastics and Composites, 24 (11). pp. 1181-1202. ISSN 0731-6844

Douglas, Adrian Keith (2005) Mechanical design aspects of a lightweight neonatal retrieval system. [Thesis (_PhD/Research)] (Unpublished)

Billingsley, John, ed. (2005) Mechatronics and machine vision 2005. Robotics and Mechatronics . Research Studies Press, Hertfordshire, England. ISBN 9781604236149

Chew, C. S. and Ku, Harry S. and Baddeley, Douglas and Snook, Chris (2005) Micrographs of the fracture of vinyl ester composites cured by microwaves: pilot study. Journal of Electromagnetic Waves and Applications, 19 (1). pp. 67-82. ISSN 0920-5071

Wang, Hao (2005) Semisolid structure formation and semisolid casting. Journal of Materials Science and Technology, 21 (s1). pp. 65-71. ISSN 1005-0302

Ng, K. C. and Yusoff, M. Z. and Yusaf, T. F. (2005) Simulations of two-dimensional high speed turbulent compressible flow in a diffuser and a nozzle blade cascade. American Journal of Applied Sciences, 2 (9). pp. 1325-1330. ISSN 1546-9239

Sharifian, Ahmad and Buttsworth, David R. (2005) Thermal effects on fibre optic pressure sensor during free piston compression experiments. In: 8th International Symposium on Fluid Control, Measurement and Visualization (8th FLUCOME), 22-25 Aug 2005, Chengdu, China. (Unpublished)

Billingsley, John and Dunn, Mark (2005) Unusual vision - machine vision applications at the NCEA. Sensor Review, 25 (3). pp. 202-208. ISSN 0260-2288

2004

Dai, Shao-Cong and Yan, Wenyi and Liu, Hong-Yuan and Mai, Yiu-Wing (2004) Experimental study on z-pin bridging law by pullout test. Composites Science and Technology, 64 (16). pp. 2451-2457. ISSN 0266-3538

Ku, Harry S. and Siores, Elias (2004) Shrinkage reduction of thermoset matrix particle reinforced composites during curing using microwaves irradiation. Transactions, Hong Kong Institution of Engineers, 11 (3). pp. 29-34. ISSN 1023-697X

Jokic, Michael D. and Longuski, James M. (2004) Design of tether sling for human transportation systems between Earth and Mars. Journal of Spacecraft and Rockets, 41 (6). 1010-1015 . ISSN 0022-4650

Silva, Alan Grant Lance (2004) The development of a new multi-directional fall arrest device. [USQ Project] (Unpublished)

Mai-Duy, Nam and Tran-Cong, Thanh (2004) An effective RBFN-boundary integral approach for the analysis of natural convection flow. International Journal for Numerical Methods in Fluids, 46 (5). pp. 545-568. ISSN 0271-2091

Mauger, Travis William (2004) Selection of an engine and design of the fuelling system for a Formula SAE car. [USQ Project] (Unpublished)

McCarthy, Cheryl (2004) Advance rate measurement for furrow irrigation. [USQ Project] (Unpublished)

Clarke, Timothy Lewis (2004) An autonomous bird deterrent system. [USQ Project] (Unpublished)

Cheah, Siew Lee (2004) Analysis of engine performance using palm oil methyl ester. [USQ Project] (Unpublished)

Taylor, Brett C. (2004) Assessment of appropriate pressure vessel flange bolt tension by finite element modelling. [USQ Project] (Unpublished)

Lee, Ven Han (2004) Co-firing of rice husk for electricity generation in Malaysia. [USQ Project] (Unpublished)

Heng, Hern (2004) Design of structural glass fitting for seismic condition. [USQ Project] (Unpublished)

Little, Jeremy (2004) Development of the drivetrain including brakes and wheels for the Formula SAE-A vehicle. [USQ Project] (Unpublished)

Ang, Soh Fong (2004) Evaluation impact strength on particulate reinforced (25% and 33%) vinyl ester composite cured under microwave conditions. [USQ Project] (Unpublished)

Hockings, Peter (2004) Fast-response piezoresistive pressure transducers for thermofluids experiments. [USQ Project] (Unpublished)

Baker, Christopher Scott (2004) FoES Formula SAE-A space frame chassis design. [USQ Project] (Unpublished)

Armstrong, John (2004) Formula SAE: design overview and project management. [USQ Project] (Unpublished)

Roache, Brody (2004) Heat transfer measurements of a re-entry capsule using fast response thermocouples. [USQ Project] (Unpublished)

Davidson, Timothy (2004) Improving the aerodynamic force measurement system for the USQ gun tunnel. [USQ Project] (Unpublished)

Stansbie, Clayton Harley (2004) Natural gas burner for copper smelter converter. [USQ Project] (Unpublished)

Faulkner, Griffith (2004) Numerical investigation into the aeration of grain silos. [USQ Project] (Unpublished)

Lee, Andrew (2004) Numerical investigation of the temperature distribution in an industrial oven. [USQ Project] (Unpublished)

Yew, Yip Soon (2004) Production flow analysis & inventory control for Orford Refrigeration. [USQ Project] (Unpublished)

Goh, Yaw Siong Oliver (2004) Reduction of noise transmission in The Adephi, Singapore. [USQ Project] (Unpublished)

Jong, Hua Kwan (2004) Safety management system. [USQ Project] (Unpublished)

Rayner, Leslie (2004) Steering design for a formula SAE-A open wheel race car. [USQ Project] (Unpublished)

Nelder, Ken (2004) The bodywork package for the USQ's Formula-SAE racer. [USQ Project] (Unpublished)

Lim, Pei Li (2004) The effect of compression ratio on the CNG-diesel engine. [USQ Project] (Unpublished)

Goodger, Anthony Maldon (2004) The formation of nitrogen oxides in a pulverised coal boiler. [USQ Project] (Unpublished)

Sercombe, David B. (2004) Transverse injection from a hypersonic cone. [USQ Project] (Unpublished)

Fulcher, Robert (2004) Teaching engineering management in a flexible learning environment. In: AaeE 2004: Creating Flexible Learning Environments, 27-29 Sept 2004 , Toowoomba, Australia.

Ku, Harry S. and Widjaya, Budiman and Lee, Kin Fung and Li, Chun Wai (2004) Thermal analysis comparison between three random glass fibre-reinforced thermoplastic matrix composites bonded by adhesives using microwaves. Journal of Reinforced Plastics and Composites, 23 (3). 1443-1460. ISSN 0731-6844

Mai-Duy, N. and Tran-Cong, T. (2004) Boundary integral-based domain decomposition technique for solution of Navier Stokes equations. CMES: Computer Modeling in Engineering and Sciences, 6 (1). pp. 59-75. ISSN 1526-1492

Buttsworth, David R. and Jones, Terry V. (2004) Transient temperature probe measurements in a Mach 4 nitrogen jet. Experiments in Fluids, 37 (1). pp. 137-145. ISSN 0723-4864

Wang, Hao and Davidson, C. J. and StJohn, David H. (2004) Semisolid microstructural evolution of AlSi7Mg during partial remelting. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing , 368 (1-2). pp. 159-167. ISSN 0921-5093

Tran, Canh-Dung and Tran-Cong, Thanh (2004) Element-free simulation of dilute polymeric flows using Brownian configuration fields. Korea-Australia Rheology Journal, 16 (1). pp. 1-15. ISSN 1226-119X

Islam, Md Mainul and Ali, Md Nawsher and Mia, Sobahan (2004) Evaluation of the properties of raw materials and products of briquetting machine. In: 2nd BSME-ASME International Conference on Thermal Engineering, 2-4 Jan 2004, Dhaka, Bangladesh.

Cubero, Samuel Nacion (2004) A general purpose inverse kinematics algorithm for all manipulators. In: 11th Annual Conference on Mechatronics and Machine Vision in Practice, 28 Nov - 3 Dec 2004 , Macau, China. (In Press)

Epaarachchi, Jayantha A. and Clausen, Philip D. (2004) Accelerated full scale fatigue testing of a small composite wind turbine blade using a mechanically operated test rig. In: 2004 Structural Integrity and Fracture International Conference (SIF2004), 26-29 Sept 2004, Brisbane, Australia.

Wang, Hao and Zou, Jin and Zhang, M. X., eds. (2004) Advanced materials science and engineering: 2004 Australia-China Materials Science Symposium, 22nd-25th October 2004, Brisbane, Australia: [special theme issue of] Journal of Materials Science & Technology, Vol. 20, Suppl. 1, 2004. Zhongguo Kexueyuan, Jinshu Yanjiusuo, China. ISBN 1005-0302

Jokic, Michael D. and Daniel, W. J. T. (2004) Aerogravity assist maneuvering of a tethered satellite system. Journal of Spacecraft and Rockets, 41 (4). pp. 614-621. ISSN 0022-4650

Mai-Duy, Nam and Tanner, R. I. (2004) An efficient BEM for numerical solution of the biharmonic boundary value problem. In: 2004 International Conference on Computational and Experimental Engineering & Sciences: Advances in Computational & Experimental Engineering & Sciences , 26-29 July 2004, Madeira, Portugal.

Bullen, Frank and Sargison, Jane E. and McCulloch, John W. (2004) Developing multi-discipline design skills in undergraduates. In: 2004 American Society for Engineering Education Annual Conference & Exposition: Engineering Education Reaches New Heights (ASEE 2004), 20-23 Jun 2004, Salt Lake City, Utah.

Cheng, Y. M. and Ku, Harry S. and Snook, Chris and Baddeley, Douglas (2004) Impact strength of vinyl ester composites cured by microwave irradiation: preliminary results. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 218 (L4). pp. 307-320. ISSN 1464-4207

Mai-Duy, Nam (2004) Indirect RBFN method with scattered points for numerical solution of PDEs. CMES: Computer Modeling in Engineering and Sciences, 6 (2). pp. 209-226. ISSN 1526-1492

Ali, Md Nawsher and Islam, Md Mainul and Ferdous, Chy. Md Refaul (2004) Investigation for a suitable screw of a briquetting machine. In: 2nd BSME-ASME lnternational Conference on Thermal Engineering, 2-4 Jan 2004, Dhaka, Bangladesh.

Ouyang, L. Z. and Wang, Hao and Zhu, M. and Zou, Jin and Chung, C. Y. (2004) Microstructure of MmM5/Mg multi-layer hydrogen storage films prepared by magnetron sputtering. Microscopy Research and Technique, 64 (4). pp. 323-329. ISSN 1059-910X

Yan, Wenyi and Lui, Hong-Yuan and Mai, Yiu-Wing (2004) Mode II delamination toughness of z-pinned laminates. Composites science and technology, 64 (13-14). pp. 1937-1945. ISSN 0266-3538

Mai-Duy, Nam and Tanner, R. I. (2004) Numerical analysis of corrugated tube flow using RBFNs. In: XIVth International Congress on Rheology, 22-27 Aug 2004, Seoul, Korea.

2003

Dunn, Mark and Billingsley, John and Finch, Neal (2003) Machine vision classification of animals. In: 10th Annual Conference on Mechatronics and Machine Vision in Practice, 09-11 Dec 2003, Perth, Australia.

Yusaf, Talal and Al-Atabi, Mushtak and Buttsworth, David R. (2003) Small scale power generation using a dual fuel system. RERIC International Energy Journal, 4 (2). pp. 129-138. ISSN 0857-6173

Billingsley, John and Dunlop, Reg (2003) Teaching mechatronics principles using laboratory classes. In: 10th Annual Conference on Mechatronics and Machine Vision in Practice, 09-11 Dec 2003, Perth, Australia.

Ong, Clement and Billingsley, John (2003) The steering of trailed implements for tractor path tracking. In: 10th Annual Conference on Mechatronics and Machine Vision in Practice, 09-11 Dec 2003, Perth, Australia.

McIlvenna, Paul and Mossad, Ruth (2003) Two dimensional transfer chute analysis using a continuum method. In: 3rd International Conference on Computational Fluid Dynamics in the Minerals and Process Industries (CFD2003), 10-12 Dec 2003, Melbourne, Australia.

Ku, H. (2003) Curing vinyl ester particle-reinforced composites using microwaves. Journal of Composite Materials, 37 (22). pp. 2027-2042. ISSN 0021-9983

Billingsley, John, ed. (2003) Mechatronics and machine vision 2003: future trends. Robotics and Mechatronics , 5 . Research Studies Press, Taunton, England. ISBN 0863802907; 9780863802904

Ku, Harry S. and Siu, Fred and Siores, Elias and Ball, James A. R. (2003) Variable frequency microwave (VFM) processing facilities and application in processing thermoplastic matrix composites. Journal of Materials Processing Technology, 139 ((1-3 SPEC)). pp. 291-295. ISSN 0924-0136

Yan, Wenyi and Liu, Hong-Yuan and Mai, Yiu-Wing (2003) Numerical study on the mode I delamination toughness of z-pinned laminates. Composites Science and Technology, 63 (10). pp. 1481-1493. ISSN 0266-3538

Buttsworth, David R. and Jones, Terry V. (2003) Concentration probe measurements in a Mach 4 nonreacting hydrogen jet. Journal of Fluids Engineering, 125 (4). pp. 628-635. ISSN 0098-2202

Ku, Harry S. (2003) Contrast joints of glass-fibre with carbon-fibre reinforced polystyrene composite bonded by microwave irradiation. Transactions, Hong Kong Institution of Engineers, 10 (2). pp. 10-16. ISSN 1023-697X

Mai-Duy, Nam and Tran-Cong, Thanh (2003) Approximation of function and its derivatives using radial basis function networks. Applied Mathematical Modelling, 27 (3). pp. 197-220. ISSN 0307-904X

Ku, Harry S. and Lee, Kin Fung and Li, Chun Wai (2003) Thermal analysis of joining thermoplastic matrix composites using microwaves. Transactions, Hong Kong Institution of Engineers, 10 (1). pp. 14-20. ISSN 1023-697X

Buttsworth, David R. and Jones, Terry V. (2003) High bandwidth stagnation temperature measurements in a Mach 6 gun tunnel flow. Experimental Thermal and Fluid Science, 27 (2). pp. 177-186. ISSN 0894-1777

Coker, Rick (2003) An investigation into the feasibility and application of fibre composites to flatbed semi-trailers. [Thesis (_PhD/Research)] (Unpublished)

Islam, Md Mainul and Khan, Kamrujjaman and Ali, Md Nawsher and Islam, Md Shahidul (2003) An investigation on the raw materials and products of the briquetting machine. In: 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003), 19-20 Dec 2003 , Khulna, Bangladesh.

Khan, Kamrujjaman and Islam, Md Mainul and Rahman, M. L. and Ali, Md Nawsher (2003) An overview of energy profile for Bangladesh: past, present and future uses. In: 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003), 19-20 Dec 2003, Khulna, Bangladesh.

Layanto, Jeffrey and Cubero, Sam and Goode, Matthew (2003) Autonomous racing car competition for mechatronics engineering education. In: 10th Annual Conference on Mechatronics and Machine Vision in Practice, 9-11 Dec 2003 , Perth, Western Australia.

Ku, Harry S. (2003) Joining of thirty three percent by weight random carbon fibre reinforced low density polyethylene using variable frequency microwave. Journal of The Institution of Engineers, Singapore, 43 (1). pp. 20-25. ISSN 0377-7464

Ku, Harry S. and Siores, Elias and Ball, James A. R. and Taube, Alex and Siu, Fred (2003) Lap shear strength comparison between different random glass fibre reinforced thermoplastic matrix composites bonded by adhesives using variable frequency microwaves (VFM) irradiation. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 217 (1). pp. 65-75. ISSN 1464-4207

Fulcher, Robert and Snook, Chris (2003) Mechatronic engineering by distance education. In: 10th Annual Conference on Mechatronics and Machine Vision in Practice, 9-11 Dec 2003 , Perth, Western Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2003) RBF interpolation of boundary values in the BEM for heat transfer problems. International Journal of Numerical Methods for Heat and Fluid Flow, 13 (5/6). pp. 611-632. ISSN 0961-5539

Ferdous, Chy. Md Refaul and Islam, Md Shahidul and Islam, Md Mainul and Alam, Md Ashraful and Rahman, A. N. M.Mizanur (2003) Solar photovoltaic technology and Bangladesh. In: 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003), 19-20 Dec 2003, Khulna, Bangladesh.

Yan, Wenyi and Wang, Chun Hui and Zhang, Xin Ping and Mai, Yiu-Wing (2003) Theoretical modeling of the effect of plasticity on reverse transformation in superelastic shape memory alloys. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing , 354 (1-2). pp. 146-157. ISSN 0921-5093

Ku, Harry S. and Lee, Kin Fung and Li, Chun Wai (2003) Thermal analysis comparison between two random glass fibre reinforced thermoplastic matrix composites bonded by adhesives using microwaves: preliminary results. Journal of Electromagnetic Waves and Applications, 17 (6). pp. 901-918. ISSN 0920-5071

Ku, Harry S. and Widjaya, Budiman and Lee, Kin Fung and Li, Chun Wai (2003) Thermal analysis of joining Nylon 66 composites using microwave irradiations. Transactions of the Canadian Society for Mechanical Engineering, 27 (3). pp. 259-278. ISSN 0315-8977

2002

Snook, Chris and Fulcher, Bob (2002) A review of teaching strategies in practical work for mechanical and mechatronic engineering students studying via on-campus and distance education. In: AaeE 2002: Leadership in Learning: Learning in Leadership, 30 Sep - 3 Oct 2002, Canberra, Australia.

Snook, Chris and Leis, John (2002) System configuration and IP networking: a team-based laboratory course. In: AaeE 2002: Leadership in Learning: Learning in Leadership, 30 Sep - 3 Oct 2002, Canberra, Australia.

Buttsworth, David R. (2002) Transient response of an erodable heat flux gauge using finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216 (8). pp. 701-716. ISSN 0954-4070

Ku, Harry S. and Siu, Fred and Siores, Elias and Ball, James A. R. (2002) Applications of fixed and variable frequency microwave (VFM) facilities in polymeric materials processing and joining. In: 2nd World Engineering Congress, 22-25 July 2002, Kuching, Malaysia.

Ku, Harry S. and Siu, Fred and Mok, P. L. and Siores, Elias and Ball, James A. R. (2002) Characterisation of chip-on-board (COB) encapsulate epoxies used in the printed circuit board assembly (PCBA) industry using variable frequency microwave (VFM) facilities. In: 2nd World Engineering Congress, 22-25 July 2002, Kuching, Malaysia.

Ku, Harry S. and Van Erp, Gerard and Ball, James A. R. and Ayers, Stephen R. and Siu, Fred (2002) Shrinkage reduction of thermoset fibre composites during hardening using microwaves irradiation for curing. In: 2nd World Engineering Congress, 22-25 Jul 2002, Kuching, Malaysia.

Buttsworth, David R. (2002) Heat transfer during transient compression: measurements and simulations. Shock Waves, 12 (1). pp. 87-91. ISSN 0938-1287

Ku, Harry S. and Siores, Elias and Taube, Alex and Ball, James A. R. (2002) Productivity improvements through the use of industrial microwave technologies. Computers and Industrial Engineering, 42 (2-4). pp. 281-290. ISSN 0360-8352

Buttsworth, David R. and Jacobs, Peter A. and Jones, Terry V. (2002) Simulation of Oxford University gun tunnel performance using a quasi-one-dimensional model. Shock Waves, 11 (5). pp. 377-383. ISSN 0938-1287

Yan, Wenyi and O'Dowd, Noel P. and Busso, Esteban P. (2002) Numerical study of sliding wear caused by a loaded pin on a rotating disc. Journal of the Mechanics and Physics of Solids, 50 (3). pp. 449-470. ISSN 0022-5096

Tran-Canh, D. and Tran-Cong, T. (2002) BEM-NN computation of generalised Newtonian flows. Engineering Analysis with Boundary Elements, 26 (1). pp. 15-28. ISSN 0955-7997

Phythian, Mark W. (2002) Autonomous agricultural robot. In: Bradbeer, Robin and Billingsley, John, (eds.) Mechatronics and machine vision 2002: current practice. Research Studies Press, Baldock, Hertfordshire, England, pp. 237-244. ISBN 0863802788

Tran, Canh-Dung and Tran-Cong, Thanh (2002) Computation of viscoelastic flow using neural networks and stochastic simulation. Korea-Australia Rheology Journal, 14 (4). pp. 161-174. ISSN 1226-119X

McCarthy, Stuart George and Billingsley, John and Harris, Harry (2002) Control of the sugar cane harvester topper. In: Bradbeer, Robin and Billingsley, John, (eds.) Mechatronics and machine vision 2002: current practice. Research Studies Press, Baldock, Hertfordshire, England, pp. 253-259. ISBN 0863802788

Ku, Harry S. and Li, Chun Wai and Lee, Kin Fung (2002) Heat distribution and thermal analysis of joining thermoplastic composites using microwave energy. Institution of Engineers, Malaysia. Journal, 64 (2). pp. 6-12. ISSN 0126-513X

Ku, Harry S. and Siores, Elias and Ball, James A. R. and Taube, Alex (2002) Joining of thirty three percent by weight random glass fibre reinforced polystyrene using variable frequency microwave. Institution of Engineers, Malaysia. Journal, 63 (2). pp. 18-24. ISSN 0126-513X

Ku, Harry S. and Siores, Elias and Ball, James A. R. (2002) Lap shear strength comparison between two types of random carbon fibre reinforced thermoplastic matrix composites bonded using variable frequency microwaves (VFM) irradiation. Journal of Materials Synthesis and Processing, 9 (6). pp. 353-361. ISSN 1064-7562

Plaza, Floran (2002) Measuring, modelling and understanding the mechanical behaviour of bagasse. [Thesis (_PhD/Research)] (Unpublished)

Bradbeer, Robin and Billingsley, John, eds. (2002) Mechatronics and machine vision 2002: current practice. Robotics and Mechatronics Series, 4 . Research Studies Press, Baldock, Hertfordshire, England. ISBN 0863802788; 9780863802782

Ku, Harry S. and Siores, Elias and Ball, James A. R. (2002) Microwave energy effects on polymer-matrix and fibre reinforcement of composites during bonding process by microwaves. Institution of Engineers, Malaysia. Journal, 63 (4). pp. 20-27. ISSN 0126-513X

Sharifian, S. A. and Buttsworth, D. R. (2002) Reducing the mechanical hysteresis problem in optically-addressed diaphragm pressure sensors. In: SPIE 2002: Vibration Measurements by Laser Techniques: Advances and Applications, 18-21 June 2002, Ancona, Italy.

Ku, Harry S. (2002) Risks involved in curing vinyl ester resins using microwaves irradiation. Journal of Materials Synthesis and Processing, 10 (2). pp. 97-106. ISSN 1064-7562

Billingsley, John (2002) The counting of macadamia nuts. In: Bradbeer, Robin and Billingsley, John, (eds.) Mechatronics and machine vision 2002: current practice. Research Studies Press, Baldock, Hertfordshire, England, pp. 221-228. ISBN 0863802788

2001

Buttsworth, David R. (2001) Assessment of effective thermal product of surface junction thermocouples on millisecond and microsecond time scales. Experimental Thermal and Fluid Science, 25 (6). pp. 409-420. ISSN 0894-1777

Sharifian, S. A. and Buttsworth, D. R. (2001) Optically addressed pressure sensors for transient gas dynamics: calibration of a preliminary design. In: 14th Australasian Fluid Mechanics Conference (AFMC 2001) , 9-14 Dec 2001, Adelaide, South Australia.

Ku, Harry S. and Siores, Elias and Ball, James A. R. (2001) Review - microwave processing of materials: part I. Transactions, Hong Kong Institution of Engineers, 8 (3). pp. 31-37. ISSN 1023-697X

Ku, Harry S. and Siores, Elias and Ball, James A. R. (2001) Review - microwave processing of materials: part II. Transactions, Hong Kong Institution of Engineers, 8 (3). pp. 38-43. ISSN 1023-697X

Ku, Harry S. and Siores, Elias and Ball, James A. R. (2001) Review - microwave processing of materials: part III. Transactions, Hong Kong Institution of Engineers, 8 (3). pp. 44-50. ISSN 1023-697X

Mossad, Ruth (2001) Numerical modelling of air temperature and velocity in a forced and free ventilation piggery. In: ASME International Mechanical Engineering Congress and Exposition, 11 - 16 Nov 2001, New York, USA.

Mai-Duy, Nam and Tran-Cong, Thanh (2001) Numerical solution of Navier-Stokes equations using multiquadric radial basis function networks. International Journal for Numerical Methods in Fluids, 37 (1). pp. 65-86. ISSN 0271-2091

Ku, H. S. and Siu, F. and Siores, E. and Ball, J. A. R. (2001) Applications of microwaves in non-destructive testing. Non-Destructive Testing - Australia . pp. 129-132. ISSN 0157-6461

Ku, Harry S. and Siu, Fred and Siores, Elias and Ball, James A. R. and Blicblau, A. S. (2001) Applications of fixed and variable frequency microwave (VFM) facilities in polymeric materials processing and joining. Journal of Materials Processing Technology, 113 (1-3). pp. 184-188. ISSN 0924-0136

Mai-Duy, Nam and Tran-Cong, Thanh (2001) Numerical solution of differential equations using multiquadric radial basis function networks. Neural Networks, 14 (2). pp. 185-199. ISSN 0893-6080

Ku, Harry S. and Horsfield, Brendan and Ball, James A. R. and Siores, Elias (2001) Permittivity measurement of thermoplastic composites at elevated temperature. Journal of Microwave Power and Electromagnetic Energy, 36 (2). pp. 101-111. ISSN 0832-7823

Ku, Harry S. and Siores, Elias and Ball, James A. R. and Chan, Peter (2001) Processing of polymer matrix composites using variable frequency microwave (VFM). In: 13th International Conference on Composite Materials (ICCM-13) , 25-29 June 2001, Beijing, China.

2000

Ku, Harry S. and MacRobert, Martin and Siores, Elias and Ball, James A. R. (2000) Characterisation of thermoplastic matrix composites (TPC) using variable frequency micorwave (VFM). Plastics, Rubber and Composites, 29 (6). pp. 285-287. ISSN 1465-8011

Ku, Harry S. and MacRobert, Martin and Siores, Elias and Ball, James A. R. (2000) Variable frequency microwave processing of thermoplastic composites. Plastics, Rubber and Composites, 29 (6). pp. 278-284. ISSN 1465-8011

Yan, Wenyi and Busso, Esteban P. and O'Dowd, Noel P. (2000) A micromechanics investigation of sliding wear in coated components. Proceedings of the Royal Society London. Series A, Mathematical and Physical Sciences, 456 . pp. 2387-2407.

Kanesenn, Nantha K. and Billingsley, John (2000) A roller skating robot. In: Billingsley, John, (ed.) Mechatronics and machine vision. Robotics and Mechatronics Series (3). Research Studies Press, Baldock, Hertfordshire, England, pp. 283-292. ISBN 0 86380 261 3

Cubero, Samuel Nacion (2000) A six-legged hybrid walking and wheeled robot. In: Billingsley, John, (ed.) Mechatronics and machine vision. Robotics and Mechatronics Series (3). Research Studies Press, Baldock, Hertfordshire, England, pp. 293-302. ISBN 0 86380 261 3

Snook, Chris (2000) Actuators and implementation issues. In: Billingsley, John, (ed.) Mechatronics and machine vision. Robotics and Mechatronics Series (3). Research Studies Press, Baldock, Hertfordshire, England, pp. 303-304. ISBN 0 86380 261 3

Maxwell, Andrew Douglas and Hancock, Nigel and Tran-Cong, Thanh (2000) Automated carbon dioxide measurement via miniaturised chemical reaction chambers under mechatronic control. In: Billingsley, John, (ed.) Mechatronics and machine vision. Robotics and Mechatronics Series (3). Research Studies Press, Baldock, Hertfordshire, England, pp. 135-142. ISBN 0 86380 261 3

Yusaf, Talal and Yusoff, Mohammed Zamri (2000) Development of a 3D CFD model to investigate the effect of the mixing quality on the CNG-diesel engine performance. In: The International Conference and Exhibition and Natural Gas Vehicles, 17-19 Oct 2000, Yokohama, Japan.

Stone, Nicholas and Billingsley, John (2000) Development of low cost range sensing instrumentation for collision avoidance applications. In: Billingsley, John, (ed.) Mechatronics and machine vision. Robotics and Mechatronics Series (3). Research Studies Press, Baldock, Hertfordshire, England, pp. 127-133. ISBN 0 86380 261 3

Fulcher, Robert and Snook, Chris (2000) Fast tracking new courses in mechatronic engineering. In: Billingsley, John, (ed.) Mechatronics and machine vision. Robotics and Mechatronics Series (3). Research Studies Press, Baldock, Hertfordshire, England, pp. 3-9. ISBN 0 86380 261 3

McCarthy, Stuart George and Harris, Harry and Billingsley, John (2000) Listening for cane loss. In: Billingsley, John, (ed.) Mechatronics and machine vision. Robotics and Mechatronics Series (3). Research Studies Press, Baldock, Hertfordshire, England, pp. 113-118. ISBN 0 86380 261 3

Billingsley, John (2000) Low cost GPS for the autonomous robot farmhand. In: Billingsley, John, (ed.) Mechatronics and machine vision. Robotics and Mechatronics Series (3). Research Studies Press, Baldock, Hertfordshire, England, pp. 119-125. ISBN 0 86380 261 3

Billingsley, John, ed. (2000) Mechatronics and machine vision. Robotics and Mechatronics Series, 3 . Research Studies Press, Baldock, Hertfordshire, England. ISBN 0 86380 261 3

Aigner, Peter and Billingsley, John (2000) The BrowsMouse - computer access with eyebrows. In: Billingsley, John, (ed.) Mechatronics and machine vision. Robotics and Mechatronics Series (3). Research Studies Press, Baldock, Hertfordshire, England, pp. 189-195. ISBN 0 86380 261 3

Schultz, Bradley Jason and Billingsley, John (2000) The mechatronic bakery. In: Billingsley, John, (ed.) Mechatronics and machine vision. Robotics and Mechatronics Series (3). Research Studies Press, Baldock, Hertfordshire, England, pp. 105-112. ISBN 0 86380 261 3

Ku, Harry S. and Siu, Fred and Siores, Elias and Ball, James A. R. and Blicblau, A. S. (2000) Variable frequency microwave (VFM) processing facilities and application in processing thermoplastic matrix composites. In: IMCC'2000: 9th International Manufacturing Conference in China: Innovation and Technology for the New Millennium, 16-17 Aug 2000, Hong Kong.

1999

Ku, Harry S. and Ball, James A. R. and Siores, Elias and Horsfield, Brendan (1999) Microwave processing and permittivity measurement of thermoplastic composites at elevated temperature. Journal of Materials Processing Technology, 89-90 . pp. 419-424. ISSN 0924-0136

Ku, Harry S. and Ball, James A. R. and Siores, Elias and Chan, Peter (1999) Complex permittivity of low loss thermoplastic composites using a resonant cavity method. In: 12th International Conference on Composite Materials (ICCM-12), 5-9 July 1999, Paris, France.

Morgan, Michael J. and Fulcher, Robert and Ku, Harry S. (1999) Innovative residential schools for engineering degree courses. Quarterly Journal of Singapore Institute of Engineering Technologists, 18 (4). pp. 53-58. ISSN 1793-5059

Ku, Harry S. and Ball, James A. R. and Siores, Elias and Chan, Peter (1999) Loss tangent for low loss thermoplastic composites. Science and Engineering of Composite Materials, 8 (3). pp. 123-128. ISSN 0792-1233

Ku, Harry S. and Siores, Elias and Ball, James A. R. (1999) Microwave facilities for welding thermoplastic composites and preliminary results. Journal of Microwave Power and Electromagnetic Energy, 34 (4). pp. 195-205. ISSN 0832-7823

1998

Buttsworth, D. R. and Elston, S. J. and Jones, T. V. (1998) Direct full surface skin friction measurement using nematic liquid crystal techniques. Journal of Turbomachinery, 120 (4). pp. 847-853. ISSN 0889-504X

Ku, Harry S. and Siores, Elias and Ball, James A. R. and Horsfield, Brendan (1998) An important step in microwave processing of materials: permittivity measurements of thermoplastic composites at elevated temperatures. In: 1998 Pacific Conference on Manufacturing, 18-21 August 1998, Brisbane, Australia.

Morgan, Michael J. and Fulcher, Robert and Ku, Harry S. (1998) Articulation, credit transfer and flexible delivery of engineering degree courses: Australia, Malaysia and Hong Kong. Jurutera: Institution of Engineers Malaysia Monthly Bulletin, 1998 (1). pp. 57-67. ISSN 0126-9909

1997

Ku, Harry S. and Siores, Elias and Ball, James A. R. (1997) Weldability and heat affected zone (HAZ) evaluation for high energy rate joining of thermoplastic composites using microwaves. In: 11th International Conference on Composite Materials (ICCM-11), 14-18 July 1997, Gold Coast, Australia.

Buttsworth, David R. and Jones, T. V. (1997) Radial conduction effects in transient heat transfer experiments. Aeronautical Journal, 101 (1005). pp. 209-212. ISSN 0001-9240

Billingsley, John (1997) An engineer's lament. Australiasian Science Magazine, 6 (2). pp. 50-51. ISSN 0963-7346

1996

Morgan, Michael J. and Fulcher, Robert and Ku, Harry S. (1996) Hong Kong Higher Diploma in Engineering and Australian Bachelor of Technology in Engineering: similarities and differences. Asia Engineer . pp. 21-22. ISSN 1029-368X

NULL

Maruping, Pako The design and construction of a large scale-force feedback joystick for the use in physiotherapy. [USQ Project] (Unpublished)