Browse by Department

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna (2013) Analysis of a railway turnout system with a spot replacement sleeper. In: ACMSM 22: From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Lokuge, Weena and Aravinthan, Thiru (2013) Effect of fly ash on the behaviour of polymer concrete with different types of resin. Materials and Design, 51 . pp. 175-181. ISSN 0264-1275

Mat Nawi, Nazmi and Chen, Guangnan and Jensen, Troy and Mehdizadeh, Saman Abdanan (2013) Prediction and classification of sugar content of sugarcane based on skin scanning using visible and shortwave near infrared. Biosystems Engineering, 115 (2). pp. 154-161. ISSN 1537-5110

Manalo, A. C. (2013) Behaviour of fibre composite sandwich structures under short and asymmetrical beam shear tests. Composite Structures, 99 . pp. 339-349. ISSN 0263-8223

Huang, Shuangping and Hong, Tiansheng and Yue, Xuejun and Wu, Weibin and Cai, Kun and Li, Yunyu (2013) Hyperspectral estimation model of total phosphorus content for citrus leaves. Transactions of the Chinese Society for Agricultural Machinery , 44 (4). pp. 202-207. ISSN 1000-1298

Guades, Ernesto and Aravinthan, Thiru and Manalo, Allan and Islam, Mainul (2013) Experimental investigation on the behaviour of square FRP composite tubes under repeated axial impact. Composite Structures, 97 . pp. 211-221. ISSN 0263-8223

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Manalo, Allan (2013) Geometry and restraint effects on the bending behaviour of the glass fibre reinforced polymer sandwich slabs under point load. Materials and Design, 45 . pp. 125-134. ISSN 0264-1275

Ye, Lieping and Ma, Qianli and Miao, Zhiwei and Guan, Hong and Zhuge, Yan (2013) Numerical and comparative study of earthquake intensity indices in seismic analysis. Structural Design of Tall and Special Buildings, 22 (4). pp. 362-381. ISSN 1541-7794

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2013) A review on the characteristics of gomuti fibre and its composites with thermoset resins. Journal of Reinforced Plastics and Composites, 32 (2). pp. 124-136. ISSN 0731-6844

Ghabraie, Behrooz and Ren, Gang and Ghabraie, Kazem (2013) Effects of thickness of roof layers on optimum design of truss bolt system using finite element modeling techniques. Electronic Journal of Geotechnical Engineering, 13 (A). pp. 147-158.

Hussin, M. K. and Zhuge, Y. and Bullen, F. and Lokuge, W. P. (2013) A mathematical model for complete stress-strain curve prediction of permeable concrete. In: ACMSM 22: From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Zhuge, Yan (2013) A review of aerogels and their application as a multi-functional building material. Applied Mechanics and Materials, 253-255 . pp. 564-567. ISSN 1660-9336

Guades, E. J. and Aravinthan, T. and Manalo , A. C. and Islam, M. M. (2013) Effects of energy level and impact repetitions on the impact fatigue behaviour and post-impact flexural properties of square FRP pultruded tubes. In: ACMSM 22: From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Lokuge, W. P. and Aravinthan, T. (2013) Mechanical properties of polymer concrete with different types of resin. In: ACMSM 22: From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Al-Nuaimi, Hamdi and Ayers, Ron and Somasundaraswaran, Kathirgamalingam (2013) Modelling interrupted flow conditions on an arterial road using VISSIM software. In: 14th Road Engineering Association of Asia and Australasia Conference (REAAA 2013): The Road Factor in Economic Transformation, 26-28 Mar 2013 , Kuala Lumpur, Malaysia.

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2013) Multi-objective design optimisation of GFRP sandwich beams. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2013) Properties and behaviour of gomuti fibre composites under tensile and compressive load. In: ACMSM 22: From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Shiau, Jim (2013) Shakedown analysis of layered continuum. In: 1st Australasia and South East Asia Conference in Structural Engineering and Construction (ASEA-SEC-1), 28 Nov-2 Dec 2012, Perth, Australia.

Bajracharya, R. M. and Lokuge, W. P. and Karunasena, W. and Lau, K.T. and Mosallam, A. S. (2013) Structural evaluation of concrete expanded polystyrene sandwich panels for slab applications. In: ACMSM 22: From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Al-Nuaimi, Hamdi and Ayers, Ron and Somasundaraswaran, Kathirgamalingam (2012) The effectiveness of using variable speed limit on the performance of an interrupted flow. In: 2012 IASTED International Conference: Engineering Applications for the 21st Century (EAS 2012) , 27-29 Dec 2012, Colombo, Sri Lanka.

Shahidi, A. M. and Smith, R. and Gillies, M. (2012) Seepage rate estimation from total channel control data during periods of shut down: preliminary data quality assessment. Case study: Coleambally irrigation system. In: 4th International Conference on Sustainable Irrigation and Drainage: Management, Technologies and Policies , 11-13 Dec 2012, Adelaide, Australia.

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of full-scale railway turnout sleepers from glue-laminated fibre composite sandwich structures. Journal of Composites for Construction, 16 (6). pp. 724-736. ISSN 1090-0268

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2012) Investigation of the free vibration behaviour of an innovative GFRP sandwich floor panel. Construction and Building Materials, 37 . pp. 209-219. ISSN 0950-0618

Manalo, A. C. and Karunasena, W. and Lau, K. T. (2012) Mechanical properties of bamboo fiber-polyester composites. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation , 11-14 Dec 2012, Sydney, Australia.

Nguyen, T. and Ghabraie, K. and Tran-Cong, T. (2012) Tunnel reinforcement optimisation for nonlinear material. In: 4th International Conference on Computational Methods (ICCM 2012), 25-28 Nov 2012, Gold Coast, Australia.

Aravinthan, T. (2012) Composites in civil infrastructure – R&D to applications. In: 6th International Composites Conference (ACUN 6): Composites and Nanocomposites in Civil, Offshore and Mining Infrastructure , 14-16 Nov 2012, Melbourne, Australia.

Lokuge, W. and Eberhard, D. and Karunasena, W. (2012) Geopolymer concrete with FRP confinement. In: 6th International Composites Conference (ACUN 6): Composites and Nanocomposites in Civil, Offshore and Mining Infrastructure , 14-16 Nov 2012, Melbourne, Australia.

Manalo, A. C. (2012) Recent developments on fibre composite sandwich structures in civil infrastructure. In: 6th International Composites Conference (ACUN 6): Composite and Nanocomposites in Civil, Offshore and Mining Infrastructure, 14-16 Nov 2012, Melbourne, Australia.

Falzon, P. and Leong, K. H. and McGarva, L. and Leong, Y. L. and Manalo, A. and Virk, A. and Leipnik, D. and Djukic, L. (2012) Development and assessment of a carbon fibre reinforced composite repair system. In: 8th Asian-Australasian Conference on Composite Materials, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Mills, Julie E. and Ma, Xing and Zhuge, Yan (2012) Experimental study on multi-panel retrofitted steel transmission towers. Journal of Constructional Steel Research, 78 . pp. 58-67. ISSN 0143-974X

Cook, F. J. and Knight, J. H. and Doble, R. C. and Raine, S. R. (2012) An improved solution for the infiltration advance problem in irrigation hydraulics. Irrigation Science . ISSN 0342-7188 (In Press)

Klinge, Craig Desmond (2012) Behaviour of gang-nail plated timber joints in tension perpendicular to the grain. [USQ Project] (Unpublished)

Handley, Robert (2012) Carbon offsetting through soil carbon sequestration for the coal mining industry: an application of a soil carbon modelling. [USQ Project] (Unpublished)

Smith, Scott David (2012) Determination of a strategic planning approach for maintenance management of a major road network. [USQ Project] (Unpublished)

Taylor, Jarrod Lee (2012) Evaluation of the capacity of signalised two lane roundabouts. [USQ Project] (Unpublished)

Dang, Aaditi (2012) Herbicides wash off from cane trash by rainfall. [USQ Project] (Unpublished)

Warren, Bradley (2012) Investigating mechanisms for effluent pond sealing: the effect of suspended organic particulate on soil hydraulic conductivity. [USQ Project] (Unpublished)

Zhuge, Yan and Mills, Julie E. and Ma, Xing (2012) Modelling of steel lattice tower angle legs reinforced for increased load capacity. Engineering Structures, 43 . pp. 160-168. ISSN 0141-0296

Baillie, Craig and Chen, Guangnan (2012) Opportunities for reducing on-farm energy use and greenhouse gas emissions in sugarcane. International Sugar Journal, 114 (1366). pp. 725-730. ISSN 0020-8841

Kist, Alexander A. and Brodie, Lyn (2012) Quality of service, quality of experience and online learning. In: 42nd ASEE/IEEE Frontiers in Education Conference (FIE 2012): Soaring to new Heights in Engineering Education, 3-6 Oct 2012, Seattle, WA. United States.

Wieck, Travis (2012) Soil chemistry equilibrium as influenced by solution volume and concentration. [USQ Project] (Unpublished)

Manalo, Allan and Mutsuyoshi, Hiroshi and Matsui, Takahiro (2012) Testing and characterization of thick hybrid fibre composites laminates. International Journal of Mechanical Sciences , 63 (1). pp. 99-109. ISSN 0020-7403

Black, Gerard Wiiliam (2012) The investigation of the sustainability of a regional approach to Water Sensitive Urban Design using a Triple Bottom Line Assessment. [USQ Project] (Unpublished)

Whittaker, Adam (2012) The safety benefit of continuous narrow painted median strips. [USQ Project] (Unpublished)

Banhazi, T. M. and Lehr, H. and Black, J. L. and Crabtree, H. and Schofield, P. and Tscharke, M. and Berckmans, D. (2012) Precision livestock farming: an international review of scientific and commercial aspects. International Journal of Agricultural and Biological Engineering, 5 (3). pp. 1-9. ISSN 1934-6344

Keys, Jason and Ayers, Ron (2012) The effects of improved vehicle technology on the design of acceleration and deceleration lanes at freeway entry and exit ramps. In: 25th Australian Road Research Board Conference: Shaping the Future: Linking Policy, Rresearch and Outcomes (ARRB 2012) , 23-26 Sep 2012, Perth, Australia.

Craig, Ian and Shiau, Jim and Erdei, Laszlo (2012) Contaminated soil/groundwater remediation using Permeable Reactive Barrier (PRB) techniques. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Ono, Fabio Benedito and Guilherme, Luiz Roberto Guimaraes and Penido, Evanise Silva and Carvalho, Geila Santos and Hale, Beverley and Toujaguez, Regla and Bundschuh, Jochen (2012) Arsenic bioaccessibility in a gold mining area: a health risk assessment for children. Environmental Geochemistry and Health, 34 (4). pp. 457-465. ISSN 0269-4042

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of glued fibre composite sandwich structure in flexure: experiment and fibre model analysis. Materials and Design, 39 . pp. 458-468. ISSN 0264-1275

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2012) Experimental and numerical analysis of an innovative GFRP sandwich floor panel under point load. Engineering Structures, 41 . pp. 126-135. ISSN 0141-0296

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

Al-Juboori, Raed A. and Yusaf, Talal (2012) Identifying the optimum process parameters for ultrasonic cellular disruption of e. coli. International Journal of Chemical Reactor Engineering, 10 (1). pp. 1-32. ISSN 1542-6580

Ghabraie, B. and Ren, G. and Xie, Y. M. and Ghabraie, K. (2012) Study of truss bolt system for highly stressed rock mass using finite element modelling techniques. In: 11th Australia New Zealand Conference on Geomechanics: Ground Engineering in a Changing World, 15-18 July 2012, Melbourne, Australia.

Mat Nawi, Nazmi and Chen, Guangnan and Jensen, Troy and Baillie, Craig (2012) Potential technologies to measure sugarcane quality in the field. In: 2012 International Conference of Agricultural Engineering (CIGR-AgEng 2012), 8-12 July 2012, Valencia, Spain.

Mat Nawi, Nazmi and Chen, Guangnan and Jensen, Troy and Baillie, Craig (2012) Prediction of sugar content along the height of sugarcane internodes using VisNIR. In: 2012 International Conference of Agricultural Engineering (CIGR-AgEng 2012), 8-13 July 2012, Valencia, Spain.

Somasundaraswaran, Kathirgamalingam (2012) Impact of the application of international quality processes on engineering education at universities in Sri Lanka. Journal of Professional Issues in Engineering Education and Practice, 138 (3). pp. 193-197. ISSN 1052-3928

Nicolli, Hugo B. and Bundschuh, Jochen and Blanco, Maria del C. and Tujchneider, Ofelia C. and Panarello, Hector O. and Dapena, Cristina and Rusansky, Jorge E. (2012) Arsenic and associated trace-elements in groundwater from the Chaco-Pampean plain, Argentina: results from 100 years of research. Science of the Total Environment, 429 . pp. 36-56. ISSN 0048-9697

McClintock, Tyler R. and Chen, Yu and Bundschuh, Jochen and Oliver, John T. and Navoni, Julio and Olmos, Valentina and Lepori, Edda Villaamil and Ahsan, Habibul and Parvez, Faruque (2012) Arsenic exposure in Latin America: biomarkers, risk assessments and related health effects. Science of the Total Environment, 429 . pp. 76-91. ISSN 0048-9697

Lopez, Dina L. and Bundschuh, Jochen and Birkle, Peter and Armienta, Maria Aurora and Cumbal, Luis and Sracek, Ondra and Cornejo, Lorena and Ormachea, Mauricio (2012) Arsenic in volcanic geothermal fluids of Latin America. Science of the Total Environment, 429 . pp. 57-75. ISSN 0048-9697

Hoinkis, J. and Hermann, M. and Schmidt, S. and Gukelberger, E. and Ghosh, A. and Chatterjee, D. and Bundschuh, J. (2012) Arsenic removal from groundwater by small-scale reverse osmosis unit in rural Bihar, India. In: 4th International Congress on Arsenic in the Environment: Understanding the Geological-Medical Interface of Arsenic (AS 2012), 22-27 Jul 2012, Cairns, Australia.

Aullon Alcaine, A. and Sandhi, A. and Bhattacharya, P. and Jacks, G. and Bundschuh, J. and Thunvik, R. and Schulz, C. and Morth, C. M. (2012) Distribution and mobility of geogenic arsenic in the shallow aquifers of the northeast of La Pampa, Argentina. In: 4th International Congress on Arsenic in the Environment: Understanding the Geological and Medical Interface of Arsenic (AS 2012), 22-27 Jul 2012, Cairns, Australia.

Litter, Marta I. and Bundschuh, Jochen (2012) Emerging options for solving the arsenic problems of rural and periurban areas in Latin America. In: 4th International Congress on Arsenic in the Environment: Understanding the Geological-Medical Interface of Arsenic (AS 2012), 22-27 Jul 2012, Cairns, Australia.

Bundschuh, Jochen and Litter, Marta I. and Parvez, Faruque and Roman-Ross, Gabriela and Nicolli, Hugo B. and Jean, Jiin-Shuh and Liu, Chen-Wuing and Lopez, Dina and Armienta, Maria A. and Guilherme, Luiz R. G. and Cuevas, Alina Gomez and Cornejo, Lorena and Cumbal, Luis and Toujaguez, Regla (2012) One century of arsenic exposure in Latin America: a review of history and occurrence from 14 countries. Science of the Total Environment, 429 . pp. 2-35. ISSN 0048-9697

Zhuge, Yan and Brodie, Lyn and Mills, Julie (2012) The effectiveness of team project work for distance education students. In: 8th International CDIO Conference (Conceive Design Implement Operate 2012), 1-4 Jul 2012, Brisbane, Australia.

Abeysekera, Vasantha (2012) A conceptual framework for client financed construction and non-traditional approaches for financing construction work. In: World Construction Conference 2012: Global Challenges in Constrcution Industry, 28-30 June 2012, Colombo, Sri Lanka.

Abeysekera, Vasantha and Soysa, Mohantha (2012) Monetary retentions for subcontract work: a risk-based approach. In: World Construction Conference 2012: Global Challenges in Constrcution Industry, 28-30 June 2012, Colombo, Sri Lanka.

Abeysekera, Ashoka and Abeysekera, Vasantha (2012) Motivating the construction academic: a conceptual study. In: World Construction Conference 2012: Global Challenges in Constrcution Industry, 28 - 30 June 2012, Colombo, Sri Lanka.

Abeysekera, Vasantha (2012) Resolving retention polarity: the perceptions of structural steel fabricators. In: World Construction Conference 2012: Global Challenges in Constrcution Industry, 28-30 June 2012, Colombo, Sri Lanka.

Uddin, Jasim and Smith, Rod and Hancock, Nigel and Foley, Joseph (2012) New approach to estimate the additional water requirements in sprinkler irrigation: a predictive model. In: ICID & Irrigation Australia 2012 Conference and Trade Show , 24-29 June 2012, Adelaide, Australia.

Akbar, Ghani and Raine, Steven and McHugh, Allen and Hamilton, Greg (2012) A soil management technique to enhance lateral infiltration (subbing) in permanent raised beds. In: ICID & Irrigation Australia 2012 Conference and Trade Show, 24-29 June 2012, Adelaide, Australia.

Uddin, Jasim and Smith, Rod and Hancock, Nigel and Foley, Joseph (2012) A novel technique to measure the total evaporation and its components during sprinkler irrigation. In: ICID & Irrigation Australia 2012 Conference and Trade Show, 24-29 June 2012, Adelaide, Australia.

Akbar, Ghani and Raine, Steven and McHugh, Allen and Hamilton, Greg (2012) Impact of renovating permanent raised beds on water use productivity under vertisol. In: ICID & Irrigation Australia 2012 Conference and Trade Show, 24-29 June 2012, Adelaide, Australia.

Pittaway, P. and Martinez-Alvarez, V. and Gallego-Elvira, B. and Hancock, N. (2012) The impact of artificial monolayers on water quality: data from tank and field trials. In: 4th Urban Water Security Reseach Alliance Science Forum and Stakeholder Engagement, 19-20 Jun 2012, Brisbane, Australia.

Ghabraie, Kazem (2012) Applications of topology optimization techniques in seismic design of structure. In: Plevris, Vagelis and Mitropoulou, Chara Ch. and Lagaros, Nikos D., (eds.) Structural seismic design optimization and earthquake engineering: formulations and applications. IGI Publishing (IGI Global), pp. 232-268. ISBN 1466616407

Guades, Ernesto and Aravinthan, Thiru and Islam, Mainul and Manalo, Allan (2012) A review on the driving performance of FRP composite piles. Composite Structures, 94 (6). pp. 1932-1942. ISSN 0263-8223

Aravinthan, Vasantha and Ho, Goen and Gray, Julian and Butler, Reid and Connell, Damien (2012) What are smart meters? Water, 39 (2). pp. 80-84. ISSN 0310-0367

Aravinthan, Vasantha and Ho, Goen and Gray, Julian and Butler, Reid and Connell, Damien (2012) What are smart meters? [Fact Sheet]. Australian Water Association, Sydney, Australia.

Manalo, A. C. and Aravinthan, T. and Mutsuyoshi, H. and Matsui, T. (2012) Composite behaviour of a hybrid FRP bridge girder and concrete deck. Advances in Structural Engineering, 15 (4). pp. 589-600. ISSN 1369-4332

Abeysekera, Vasantha (2012) Mortar consumption characteristics of ‘brickwork’ and a framework for managing brick and mortar walls in chaotic environments. Engineer, XXXXV (02). pp. 49-64. ISSN 1800-1122

Ma, Xing and Mills, Julie E. and Brown, Graham and Zhuge, Yan (2012) A force method model for static analysis of transmission line system subjected to in-plane and out-of-plane loadings. In: ICTAS 2011: 4th International Conference on Technology of Architecture and Structure, 22-24 Sep 2011, Xi'an, China.

Raine, Steven (2012) Using treated CSG water for irrigation in the Surat Basin: opportunity or threat? Queensland Mining and Energy Bulletin, Autumn 2012 . pp. 36-39.

Nawi, Nazmi Mat and Jensen, Troy and Chen, Guangnan (2012) The application of spectroscopic methods to predict sugarcane quality based on stalk cross-sectional scanning. American Society of Sugar Cane Technologists Journal, 32 . pp. 16-27. ISSN 1075-6302

Manalo, Allan C. and Aravinthan, Thiru (2012) Mechanical behaviour of a new type of fibre composite railway sleeper. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Karu (2012) Prediction of the flexural behavior of fibre composite sandwich beams. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Aravinthan, Thiru (2012) Research and development of fibre composites in civil infrastructure - the Australian experience [Keynote address]. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Guades, Ernesto J. and Aravinthan, Thiru and Islam, Md. Mainul and Manalo, Allan C. (2012) Stiffness of FRP pultruded tubes under repeated axial impacts. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Manalo, Allan and Mutsuyoshi, Hiroshi (2012) Behavior of fiber-reinforced composite beams with mechanical joints. Journal of Composite Materials, 46 (4). pp. 483-496. ISSN 0021-9983

Awad, Ziad K. and Yusaf, Talal (2012) Fibre composite railway sleeper design by using FE approach and optimization techniques. Structural Engineering and Mechanics, 41 (2). pp. 231-242. ISSN 1225-4568

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Stevens, Nick (2012) Analysis of a typical railway turnout sleeper system using grillage beam analogy. Finite Elements in Analysis and Design, 48 (1). 1376-1391 . ISSN 0168-874X

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2012) A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials and Design, 33 (1). pp. 534-544. ISSN 0264-1275

Simpson, John Stanley (2012) Applied research on on-site and small community wastewater treatment and effluent disposal in Australasia. [Thesis (_PhD/Research)] (Unpublished)

Bhowmick, Subhamoy and Nath, Bibhash and Halder, Dipti and Biswas, Ashis and Majumder, Santanu and Mondal, Priyanka and Chakraborty, Sudipta and Nriagu, Jerome and Bhattacharya, Prosun and Iglesias, Monica and Roman-Ross, Gabriela and Guha Mazumder, Debendranath and Bundschuh, Jochen and Chatterjee, Debashis (2012) Arsenic mobilization in the aquifers of three physiographic settings of West Bengal, India: understanding geogenic and anthropogenic influences. Journal of Hazardous Materials . ISSN 0304-3894 (In Press)

Guilherme, L. R. G. and Toujaguez, R. and Ono, F. B. and Martins, V. and Cabrera, P. P. and Blanco, A. V. and Bundschuh, J. (2012) Arsenic speciation and bioaccessibility in gold mining tailings, Cuba. In: 4th International Congress on Arsenic in the Environment: Understanding the Geological and Medical Interface of Arsenic (AS 2012), 22-27 Jul 2012, Cairns, Australia.

Shiau, Jim and Smith, Catherine (2012) Developing numerical models for the design of cantilever sheet pile wall. In: 1st Australasia and South-East Asia Structural Engineering and Construction Conference, 28 Nov - 2 Dec 2012, Perth, Australia.

Hoque, M. A. and Aravinthan, V. (2012) Estimating bio-kinetics for nitrogen source oxidation processes using online measurements in activated sludge. Journal of Environmental Technology and Construction Engineering, 1 (1). pp. 53-65. ISSN 2226-2725

Nawi, N. M. and Yahya, A. and Chen, G. and Bockari-Gevao, S. M. and Maraseni, T. N. (2012) Human energy expenditure in lowland rice cultivation in Malaysia. Journal of Agricultural Safety and Health, 18 (1). pp. 45-56. ISSN 1074-7583

Hussin, Manal and Zhuge, Yan and Bullen, Frank and Lokuge, Weena (2012) Investigation of some fundamental properties of permeable concrete. In: ICEMMA 2012: International Conference on Emerging Materials and Mechanics Applications , 5-6 Feb 2012, Hangzhou, China.

Liu, Chia-Chuan and Kar, Sandeep and Jean, Jiin-Shuh and Wang, Chung-Ho and Lee, Yao-Chang and Sracek, Ondra and Li, Zhaohui and Bundschuh, Jochen and Yang, Huai-Jen and Chen, Chien-Yen (2012) Linking geochemical processes in mud volcanoes with arsenic mobilization driven by organic matter. Journal of Hazardous Materials . ISSN 0304-3894 (In Press)

Awad, Ziad Khalaf (2012) Novel fibre composite civil engineering sandwich structures: behaviour, analysis, and optimum design. [Thesis (_PhD/Research)] (Unpublished)

He, J. and McHugh, A. D. and Li, H. W. and Wang, Q. J. and Li, W. Y. and Rasaily, R. G. and Li, H. (2012) Permanent raised beds improved soil structure and yield of spring wheat in arid north-western China. Soil Use and Management . ISSN 0266-0032 (In Press)

Taylor, B. A. (2012) Predicting normalised monthly patterns of domestic external water demand using rainfall and temperature data. Water Science and Technology: Water supply, 12 (2). pp. 168-178. ISSN 1606-9749

Cardona, Francisco and Tawfik, Qaidar H. and Karunasena, Karu (2012) Reinforcement of corroded steel structures with CFRP panels. In: ICACE 2012: International Conference on Architectural and Civil Engineering, 24-25 Oct 2012, Bali, Indonesia.

Ramos Ramos, Oswaldo Eduardo and Cáceres, Luis Fernando and Ormachea Muñoz, Mauricio Rodolfo and Bhattacharya, Prosun and Quino, Israel and Quintanilla, Jorge and Sracek, Ondra and Bundschuh, Jochen and García , Maria Eugenia (2012) Sources and behavior of arsenic and trace elements in groundwater and surface water in the Poopó Lake Basin, Bolivian Altiplano. Environmental Earth Sciences, 66 (3). pp. 793-807. ISSN 1866-6280

Brodie, Ian M. (2012) SSUIS – a research model for predicting suspended solids loads in stormwater runoff from urban impervious surfaces. Water Science and Technology, 65 (12). pp. 2140-2147. ISSN 0273-1223

Brodie, I. (2012) Stormwater harvesting and WSUD frequent flow management: a compatibility analysis. Water Science and Technology, 66 (3). pp. 612-619. ISSN 0273-1223

Brodie, Ian M. (2012) Stormwater reuse treatment requirements and screening-level risk assessment at two urban spatial scales. Journal of Water Reuse and Desalination, 2 (1). pp. 13-21. ISSN 2220-1319

Al-juboori, Raed Ahmed (2012) Ultrasound technology as a pre-treatment for biofouling control in reverse osmosis (RO) system. [Thesis (_PhD/Research)] (Unpublished)

Hasna, A. M. (2011) Microwave processing applications in chemical engineering: cost analysis. Journal of Applied Sciences, 11 (21). pp. 3613-3618. ISSN 1812-5654

Aravinthan, Thiru and Lokuge, Weena and Manalo, Allan (2011) Effectiveness of formative online quizzes in learning and teaching a structural engineering course. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2011) Flexural strength of sandwich panel with lignocellulosic composites intermediate layer – a statistic approach. International Journal of Protective Structures, 2 (4). pp. 453-464. ISSN 2041-4196

Aravinthan, Thiru and Manalo, Allan (2011) Student performance in an online postgraduate course on fibre composites for civil engineers. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Shiau, Jim and Al Abri, Mohammed (2011) A study on the failure mechanisms of horizontal plate anchors in clay. In: ICAGE 2011: International Conference on Advances in Geotechnical Engineering, 7-9 Nov 2011, Perth, Western Australia.

Peters, Renee (2011) Advanced analysis of shallow foundations located near slopes. [USQ Project] (Unpublished)

Banhazi, T. M. and Stott, P. and Rutley, D. and Blanes-Vidal, V. and Pitchford, W. (2011) Air exchanges and indoor carbon dioxide concentration in Australian pig buildings: effect of housing and management factors. Biosystems Engineering, 110 (3). pp. 272-279. ISSN 1537-5110

Graham, Kim (2011) Local government greenhouse gas abatement reporting. [USQ Project] (Unpublished)

Lian, C. and Zhuge, Y. and Beecham, S. (2011) The relationship between porosity and strength for porous concrete. Construction and Building Materials, 25 (11). pp. 4294-4298. ISSN 0950-0618

Shiau, J. S. and Merifield, R. S. and Lyamin, A. V. and Sloan, S. W. (2011) Undrained stability of footings on slopes. International Journal of Geomechanics, 11 (5). pp. 381-390. ISSN 1532-3641

Olm, David William Charles (2011) Management of road reconstruction and repair following a flooding disaster. [USQ Project] (Unpublished)

Evans, Darryl (2011) Prototype development for a procurement and electronic document management system. [USQ Project] (Unpublished)

Cortie, Michael B. and Xiao, Linda and Erdei, Laszlo and Kealley, Catherine S. and Dowd, Annette R. and Kimpton, Justin A. and McDonagh, Andrew M. (2011) Thermal stability of (KxNayH1–x–y)2Ti6O13 nanofibers. European Journal of Inorganic Chemistry (33). pp. 5087-5095. ISSN 1434-1948

Lokuge, Weena and Aravinthan, Thiru and Sirimanna, Chamila Sampath and Islam, Mainul (2011) Influence of fly ash proportions on properties of polymer cconcrete with polyester resin. In: Concrete 2011: Building a Sustainable Future, 12-14 Oct 2011, Perth, Western Australia.

Bolt, Jason and Zhuge, Yan and Bullen, Frank (2011) The effect of titanium dioxide addition on the hydraulic and mechanical properties of permeable concrete. In: Concrete 2011: Building a Sustainable Future, 12-14 Oct 2011, Perth, Western Australia.

Fichera, Anthony (2011) A practical comparison of VISSIM and SIDRA for the assessment of development impacts. [USQ Project] (Unpublished)

Randall, Neil William (2011) A preliminary analysis of the effectiveness of the new QLD GDL program. [USQ Project] (Unpublished)

Keleher, Matthew (2011) Analysis of high-speed rural traffic crashes within the South-West district of Toowoomba regional council. [USQ Project] (Unpublished)

O'Keeffe, Andrew (2011) Behaviour of polymer concrete for infilling fibre composite tubes. [USQ Project] (Unpublished)

Truasheim, Barak (2011) CFD modelling of a pump intake. [USQ Project] (Unpublished)

Tomkins, Brock William (2011) Chemical resistance of geopolymer concrete against H2SO4 & NaOH. [USQ Project] (Unpublished)

Harrington, Daniel (2011) CSG water as a medium to grow marine microalgae for biofuel production. [USQ Project] (Unpublished)

Wilson, Paul (2011) Effectiveness of lime stabilisation on reactive soils for main roads. [USQ Project] (Unpublished)

Delahunty, Bruce (2011) Elevated highways – a solution to Brisbane’s traffic congestion? [USQ Project] (Unpublished)

Craig, Ian and Thorpe, David and Goh, Steven (2011) Environmental sustainability education: towards a minimum service level agreement for delivery to engineering students. In: SSEE 2011: Escaping Silos , 24-26 Oct 2011, Brisbane, Australia.

Gillies, M. H. and Smith, R. J. and Raine, S. R. (2011) Evaluating whole field irrigation performance using statistical inference of inter-furrow infiltration variation. Biosystems Engineering, 110 (2). pp. 134-143. ISSN 1537-5110

Zeller, Karl (2011) Evaluation of the operational characteristics of heavy vehicles at signalised intersections in Queensland. [USQ Project] (Unpublished)

Mautoga, Marau (2011) Fracture toughness of glass powder reinforced vinyl ester resin post cured in a conventional oven using flexural test. [USQ Project] (Unpublished)

Fenn, Scott P. (2011) Investigation into relocatable home design and construction. [USQ Project] (Unpublished)

Bauer, Amelia (2011) Investigation into the biochemical methane potential of abattoir wastewater. [USQ Project] (Unpublished)

Davydov, Alexey (2011) Investigation of the structural failure of plywood noise barriers. [USQ Project] (Unpublished)

Dakin, Anthony (2011) Investigation of the suitability of finger jointed structural timber for use in nail plated roof trusses. [USQ Project] (Unpublished)

Veenstra, Nathaniel (2011) Optimum strut-and-tie model for a cantilever curved wall. [USQ Project] (Unpublished)

Meredith, Tyronne (2011) Options for the replacement of aging bridges under local authority control in rural areas of Queensland. [USQ Project] (Unpublished)

Mohr, David (2011) Performance characterisation of pressure regulation devices used in broad-acre irrigation. [USQ Project] (Unpublished)

Dudley, Samuel (2011) Stability of underground tunnelling using relaxation techniques. [USQ Project] (Unpublished)

Yin, Matthew (2011) Using local gravel sources and granular stabilisation for the production of pavement gravels in the Toowoomba region. [USQ Project] (Unpublished)

Prasad, Nitesh Nitin (2011) Verification of simplified optimum designs for reinforced concrete beams. [USQ Project] (Unpublished)

He, J. and Li, H. W. and Tullberg, J. N. and McHugh, A. D. and Li, H. (2011) Conservation tillage improves soil properties and crops yields in North China. In: WCCA 2011: Resilient Food Systems for a Changing World, 26-29 Sep 2011, Brisbane, Australia.

Koech, R. K. and Smith, R. J. and Gillies, M. H. (2011) Design of an automatic furrow irrigation system utilising adaptive real-time control. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Baillie, J. and Brodie, I. (2011) Review of dynamic water allocation systems. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Nawi, Nazmi Mat and Chen, Guangnan and Jensen, Troy and Baillie, Craig (2011) Transferring technology of measuring sugarcane quality from the laboratory to the field: what is possible? In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Koech, R. K. (2011) Trends in the surface irrigation systems in the Australian irrigated agriculture. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Tullberg, J. and McHugh, A. and Ghareel Khabbaz, B. and Scheer, C. and Grace, P. (2011) Controlled traffic/permanent bed farming reduces GHG emissions. In: WCCA 2011: Resilient Food Systems for a Changing World , 26-29 Sep 2011, Brisbane, Australia.

Akbar, G. and McHugh, A. D. and Raine, S. R. and Hamilton, G. (2011) A preliminary evaluation of furrow inflow rate and cut-off time on the performance of smallholder raised bed farming systems. In: WCCA 2011: Resilient Food Systems for a Changing World, 26-29 Sep 2011, Brisbane, Australia.

Akbar, G. and Raine, S. and McHugh, J. and Hamilton, G. (2011) A preliminary evaluation of irrigation performance and in season changes under permanent raised beds on Vertosol in Queensland, Australia. In: WCCA 2011: Resilient Food Systems for a Changing World, 26-29 Sep 2011, Brisbane, Australia.

Hussain, Zahid and Irfan, Muhammad and Akbar, Ghani (2011) Advanced design of permanent raised bed machinery in Pakistan. In: WCCA 2011: Resilient Food Systems for a Changing World, 26-29 Sep 2011, Brisbane, Australia.

Rashidi, Majid and Khabbaz, Borzoo Ghareei (2011) Finite element modeling of soil sinkage by multiple loadings. In: CIGR 2011 International Symposium on Sustainable Bioproduction - Water, Energy, and Food (WEF 2011), 19-23 Sep 2011, Tokyo, Japan.

Pittaway, P. and Matveev, V. and Stuckey, N. (2011) Effect of a monolayer on water quality at the air-water interface. In: 3rd Urban Water Security Reseach Alliance Science Forum and Stakeholder Engagement, 14-15 Sep 2011, Brisbane, Australia.

Brodie, I. (2011) Application of level spreader – grass filter strips in South East Queensland, Australia for discharge reduction and passive irrigation. In: 12th International Conference on Urban Drainage, 11-15 Sept 2011, Porto Alegre, Brazil .

Brodie, I. (2011) Stormwater harvesting and water sensitive urban design detention: a compatibility analysis. In: 12th International Conference on Urban Drainage, 11-15 Sept 2011, Porto Alegre, Brazil.

Schmidt, E. and Brink, G. N. and O'Shannassay, G. (2011) Application systems for optimal management of monolayer films. In: 3rd Urban Water Security Reseach Alliance Science Forum and Stakeholder Engagement, 14-15 Sep 2011, Brisbane, Australia.

Jensen, T. A. and Fokkema, B. and Baillie, C. (2011) Assessing various techniques to monitor yield in sugarcane. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Chen, G. and Schmidt, E. and Symes, T. and Zhao, B. and Cameron, R. (2011) Energy use and development of online energy calculators for the nursery industry. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Baillie, C. P. and Chen, G. (2011) Energy, greenhouse gas emissions and irrigated agriculture. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

McCabe, B. K. and Pittaway, P. and Baillie, C. and Harris, P. (2011) Monitoring the performance of covered anaerobic ponds in the treatment of abattoir waste. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Nawi, Nazmi Mat and Jensen, Troy and Chen, Guangnan and Baillie, Craig (2011) The application of spectroscopic methods to predict sugarcane quality based on stalk cross-sectional scanning. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Hussain, Amjed and Raine, Steven R. (2011) A preliminary evaluation of in-season variations in sprinkler irrigation application patterns. In: Irrigation 2011: New Horizons, Fresh Ideas Regional Conference and Exhibition, 22-25 Aug 2011, Launceston, Tasmania.

Misra, R. K. and Padhi, J. and Payero, J. O. (2011) A calibration procedure for load cells to improve accuracy of mini-lysimeters in monitoring evapotranspiration. Journal of Hydrology, 406 (1-2). pp. 113-118. ISSN 0022-1694

Hoque, Muhammad Azizul and Aravinthan, Vasantha (2011) Modeling urea biodegradation in activated sludge using combined respirometric-titrimetric measurements. Desalination and Water Treatment, 32 (1-3). pp. 115-125. ISSN 1944-3994

Manalo, Allan C. and Aravinthan, Thiru (2011) Flexural behaviour of glulam beams from novel sandwich panels. In: 16th International Conference on Composite Structures (ICCS 16), 28-30 July 2011, Porto, Portugal.

El Saliby, Ibrahim and Shon, Ho Kyong and Erdei, Laszlo and Kim, Jong-Beom and Kim, Jong-Ho (2011) Co-doped photocatalyst nanomaterials for effective utilisation of solar radiation. In: 8th Asia Pacific Conference on Sustainable Energy and Environmental Technologies (APCSEET 2011), 10-13 Jul 2011, Adelaide, South Australia.

Shiau, Jim S. (2011) A shakedown limit under Hertz contact pressure. In: 2011 International Conference on Advanced Engineering Materials and Technology (AEMT 2011), 29-31 Jul 2011, Sanya, China.

Lian, C. and Zhuge, Y. and Beecham, S. (2011) Evaluation of permeability of porous concrete. In: AEMT 2011: International Conference on Advanced Engineering Materials and Technology, 29-31 Jul 2011, Sanya, China.

Banhazi, T. M. and Lehr, H. and Black, J. L. and Crabtree, H. and Schofield, P. and Tscharke, M. and Berckmans, D. (2011) Precision livestock farming: scientific concepts and commercial reality. In: XVth International Congress on Animal Hygiene: Animal Hygiene and Sustainable Livestock Production (ISAH 2011), 3-7 July 2011, Vienna, Austria .

Ismail, Siti A. and Chen, Guangnan and Baillie, Craig and Symes, Troy (2011) Energy uses for cotton ginning in Australia. Biosystems Engineering, 109 (2). pp. 140-147. ISSN 1537-5110

Kuczynski, Tadeusz and Blanes-Vidal, Victoria and Li, Baoming and Gates, Richard S. and Nääs, Irenilza de Alencar and Moura, Daniella J. and Berckmans, Daniel and Banhazi, Thomas M. (2011) Impact of global climate change on the health, welfare and productivity of intensively housed livestock. International Journal of Agricultural and Biological Engineering, 4 (2). pp. 1-22. ISSN 1934-6344

Tavakkoli, Ehsan and Lyons, Graham and English, Peter and Guppy, Chris (2011) Silicon nutrition of rice is affected by soil pH, weathering, and silicon fertilisation. Journal of Plant Nutrition and Soil Science, 174 (3). pp. 437-446. ISSN 1436-8730

Taylor, B. (2011) Approaching water sensitive cities with adaptive rainwater diversion. In: 2011 Stormwater Industry Association of Queensland State Conference: Achieving Multiple Outcomes - A Time to Reflect (SIA 2011) , 25-27 May 2011, Gold Coast, Australia.

Brodie, Ian (2011) Proof of concept analysis of level spreader – grass filter strips for runoff reduction. In: 2011 Stormwater Industry Association of Queensland State Conference: Achieving Multiple Outcomes - A Time to Reflect (SIA 2011) , 25-27 May 2011, Gold Coast, Australia.

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2011) The implementation of statistical inference to study the bending strength of sustainable hybrid sandwich panel composite. In: CEABM 2011: 1st International Conference on Civil Engineering, Architecture and Building Materials, 18-20 Jun 2011, Haikou, China.

Shrestha, Roshani and Brodie, Ian (2011) A protocol for the use of particle counting in stormwater suspended solids analysis. In: 2011 Stormwater Industry Association of Queensland State Conference: Achieving Multiple Outcomes - A Time to Reflect (SIA 2011) , 25-27 May 2011, Gold Coast, Australia.

El Saliby, Ibrahim and Erdei, Laszlo and Shon, Ho Kyong and Kim, Jong Beom and Kim, Jong-Ho (2011) Preparation and characterisation of mesoporous photoactive Na-titanate microspheres. Catalysis Today, 164 (1). pp. 370-376. ISSN 0920-5861

Guades, E. J. and Aravinthan, T. and Islam, M. M. (2011) Driveability of composite piles. In: eddBE 2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing , 27-29 Apr 2011, Brisbane, Australia.

Manalo, A. C. and Aravinthan, T. (2011) The effects of fibre wraps on the flexural behaviour of glulam composite sandwich beams. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011), 27-29 Apr 2011, Brisbane, Australia.

El Saliby, Ibrahim and Erdei, Laszlo and Shon, Ho Kyong and Kim, Jong-Ho (2011) Development of visible light sensitive titania photocatalysts by combined nitrogen and silver doping. Journal of Industrial and Engineering Chemistry, 17 (2). pp. 358-363. ISSN 1226-086X

Mutsuyoshi, Hiroshi and Hai, Nguyen Duc and Shiroki, Kensuke and Aravinthan, Thiru and Manalo, Allan (2011) Experimental investigation of HFRP composite beams. In: FRPRCS-10: 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures , 2-4 Apr 2011, Tampa, FL. United States.

Tavakkoli, Ehsan and Fatehi, Foad and Coventry, Stewart and Rengasamy, Pichu and McDonald, Glenn K. (2011) Additive effects of Na+ and Cl– ions on barley growth under salinity stress. Journal of Experimental Botany, 62 (6). pp. 2189-2203. ISSN 0022-0957

Lee, Jae-Hong and Abawi, Yahya and Kang, Chang-Sung and Choi, Byeong-Rourl and Park, Kyeong-Yeol and Lee, Ho-Jin (2011) Field-specific variable rate fertilizer application based on rice growth diagnosis and soil testing for high quality rice production. Journal of Crop Science and Biotechnology, 14 (1). pp. 79-84. ISSN 1975-9479

Banerjee, S. and Bhattacharyya, D. (2011) Optimal design of sandwich panels made of wood veneer hollow cores. Composites Science and Technology, 71 (4). pp. 425-432. ISSN 0266-3538

Manalo, Allan (2011) Behaviour of fibre composite sandwich structures: a case study on railway sleeper application. [Thesis (_PhD/Research)] (Unpublished)

Shiau, J. S. and Smith, C. A. (2011) Calculation of lateral earth pressures with layered backfill. In: Continuum and Distinct Element Numerical Modeling in Geomechanics, 14-16 Feb 2011, Melbourne, Australia.

Awad, Ziad K. and Yusaf, Talal F. (2011) Finite element analysis of fibre reinforce concrete beam subject to high temperature by using EURO-code models. In: ICCST8: 8th International Conference on Composite Science and Technology, 22-24 Mar 2011, Kuala Lumpur, Malaysia.

Vigiak, O. and Newham, L. T. H. and Whitford, J. and Roberts, A. M. and Rattray, D. and Melland, A. R. (2011) Integrating farming systems and landscape processes to assess management impacts on suspended sediment loads. Environmental Modelling and Software, 26 (2). pp. 144-162. ISSN 1364-8152

Shiau, J. S. and Hobson, M. A. (2011) Modeling uplift of plate anchor. In: Continuum and Distinct Element Numerical Modeling in Geomechanics, 14-16 Feb 2011, Melbourne, Australia.

Banerjee, Sourish (2011) Creep response of polymeric honeycombs. In: 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX) , 14-17 Jan 2011, Auckland, New Zealand.

Lian, C. and Zhuge, Y. and Beecham, S. (2011) Modelling pervious concrete under compression loading – a discrete element approach. In: ICSBM 2011: 1st International Conference on Structures and Building Materials, 7-9 Jan 2011, Guangzhou, China.

Shiau, Jim S. and Hobson, Michael A. (2011) Teaching earth pressure theory using physical models: an example in civil engineering. In: International Engineering and Technology Education Conference 2011 (IETEC 2011) , 16-19 Jan 2011, Kuala Lumpur, Malaysia.

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2011) A comparison of the shear behaviour of a fibre composite sandwich structure in the transverse and in-plane directions. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials , 7-10 Dec 2010, Melbourne, Australia.

Zhuge, Y. and Yeap, K. X. (2011) Assessment of debonding failure models for FRP retrofitted URM structures. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials , 7-10 Dec 2010, Melbourne, Australia.

Hoque, M. A. and Aravinthan, V. and Pradhan, N. M. and Sakhiya, A. (2011) Combined titrimetric respirometer as a real-time sensor to monitor the aerobic biodegradation process of different substrates. Journal of Applied Sciences, 11 (13). pp. 2299-2305. ISSN 1812-5654

Rees, S. J. and McCarthy, C. L. and Baillie, C. P. and Burgos-Artizzu, X. P. and Dunn, M. T. (2011) Development and evaluation of a prototype precision spot spray system using image analysis to target guinea grass in sugarcane. Australian Journal of Multi-Disciplinary Engineering, 8 (2). pp. 97-106. ISSN 1448-8388

Banhazi, T. M. and Tscharke, M. and Ferdous, W. M. and Saunders, C. and Lee, S.-H. (2011) Improved image analysis based system to reliably predict the live weight of pigs on farm: preliminary results. Australian Journal of Multi-Disciplinary Engineering , 8 (2). pp. 107-119. ISSN 1448-8388

Tavakkoli, Ehsan and English, Peter and Guppy, Chris (2011) Interaction of silicon and phosphorus mitigate manganese toxicity in rice in a highly weathered soil. Communications in Soil Science and Plant Analysis, 42 (5). pp. 503-513. ISSN 0010-3624

Hussin, Manal and Zhuge, Yan and Bullen, Frank and Lokuge, Weena (2011) Laboratory evaluation of the stress-strain relationship of permeable concrete. In: CEABM 2011: 1st International Conference on Civil Engineering, Architecture and Building Materials , 18-20 Jun 2011, Haikou, China.

Fitzgerald, Danial (2011) Managing the repair of transport infrastructure after a natural disaster. [USQ Project] (Unpublished)

Zhuge, Y. and Mills, J. (2011) Modelling of multi-panel transmission tower retrofitted with leg reinforcement. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2011) Multi-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applications. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Lian, Chunqi and Zhuge, Yan and Beecham, Simon (2011) Numerical simulation of the mechanical behaviour of porous concrete. Engineering Computations: International Journal for Computer-Aided Engineering and Software, 28 (8). pp. 984-1002. ISSN 0264-4401

Banhazi, T. M. and Saunders, C. and Nieuwe, N. and Lu, V. and Banhazi, A. (2011) Oil spraying as an air quality improvement technique in livestock buildings: development and utilisation of a testing device. Australian Journal of Multi-disciplinary Engineering, 8 (2). pp. 169-180. ISSN 1448-8388

Meynink, William J. C. (2011) Parsimonious hydrological modelling for resource development. [Thesis (_PhD/Research)] (Unpublished)

Bolt, J. R. and Zhuge, Y. and Bullen, F. (2011) Photocatalytic construction materials: an overview of recent developments and their application to permeable concrete. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Brodie, Ian M. and Egodawatta, Prasanna (2011) Relationships between rainfall intensity, duration and suspended particle washoff from an urban road surface. Hydrology Research: an International Journal, 42 (4). pp. 239-249. ISSN 1998-9563

Lokuge, W. P. and Setunge, S. and Sanjayan, J. G. (2011) Stress-strain model for high strength concrete confined by FRP. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Durack, James M. (2011) Structural engineering design practice. [Thesis (_PhD/Research)] (Unpublished)

Karunasena, W. and Summerville, C. J. (2011) Structural performance of low grade timber slabs. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Banhazi, T. M. and Lewis, B. and Tscharke, M. (2011) The development and commercialisation aspects of a practical feed intake measurement instrumentation to be used in livestock buildings. Australian Journal of Multi-disciplinary Engineering, 8 (2). pp. 131-138. ISSN 1448-8388

Manalo, A. C. and Aravinthan, T. and Karunasena, W. and Stevens, N. (2011) The effect of modulus of elasticity on the behaviour of railway turnout sleepers. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Jensen, T. A. and Zeller, L. C. and Apan, A. A. (2011) The use of an unmanned aerial vehicle as a remote sensing platform in agriculture. Australian Journal of Multi-Disciplinary Engineering, 8 (2). pp. 139-146. ISSN 1448-8388

Banhazi, T. (2011) Treatment of airborne pollutants in livestock buildings with ozone as potential abatement option. Australian Journal of Multi-Disciplinary Engineering , 8 (2). pp. 147-156. ISSN 1448-8388

Aravinthan, Thiru (2010) Incorporating a variety of assessment tools in a web-based postgraduate course developed for practicing engineers. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Devine, Jo and Kimmins, Lindy (2010) Developing a learning community to support student learning in a first year statics course. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Warna (2010) Evaluation of the strength and stiffness of glue-laminated fibre composite sandwich panels for structural beam application. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Western Australia.

Zhuge, Yan and Mills, Julie E. (2010) Identifying the issues of team project work for distance education students: a case study in civil engineering. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Aravinthan, T. and Heldt, T. (2010) Innovative strengthening technique using post-tensioned fibre composite wraps for bridge headstocks. Australian Journal of Structural Engineering, 11 (2). pp. 117-128. ISSN 1328-7982

Koech, Richard K. and Gillies, Malcolm H. and Smith, Rod (2010) Simulation modelling in surface irrigation systems. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Hasna, Abdallah M. (2010) Sustainability classifications in engineering: discipline and approach. International Journal of Sustainable Engineering, 3 (4). pp. 258-276. ISSN 1939-7038

Karunasena, Warna (2010) The effect of debonding on the natural frequencies of laminated fibre composite sandwich plates. In: 6th Australasian Congress on Applied Mechanics (ACAM 6) , 12-15 Dec 2010, Perth, Western Australia.

Maraseni, Tek Narayan and Chen, Guangnan and Guangren, Qian (2010) Towards a faster and broader application of biochar: appropriate marketing mechanisms. International Journal of Environmental Studies, 67 (6). pp. 851-860. ISSN 0020-7233

Tavakkoli, Ehsan and Jones, Ben and Coventry, Stewart and Rengasamy, Pichu and McDonald, Glenn (2010) On-farm assessment of sub-soil salinity and sodicity constraints to barley production in southern Australia. In: 15th Australian Agronomy Conference: Food Security from Sustainable Agriculture (ASA 2010), 15-18 Nov 2010, Lincoln, New Zealand.

Al-Juboori, Raed and Aravinthan, Vasantha and Yusaf, Talal (2010) A review of common and alternative methods for disinfection of microorganisms in water. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Allwayzy, S. H. and Yusaf, T. and McCabe, B. and Pittaway, P. and Aravinthan, V. (2010) Microalgae as alternative fuel for compression ignition (CI) Engines. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Somasundaraswaran, Kathirgamalingam (2010) The road safety: a special sign for unfamiliar drivers. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2010) Investigation of frequency characteristics of GFRP/phenolic sandwich beams. In: 2010 Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

Koech, R. K. and Smith, R. J. and Gillies, Malcolm H. (2010) Automation and control in surface irrigation systems: current status and expected future trends. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Craig, Ian and Thorpe, David and Kamel, Fouad and Goh, Steven C. (2010) Concentrating solar power: parabolic trough with 20% gas boost (CSP-PT+20%). In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Walter, Nathan Johan (2010) Development of a bridge asset management plan for Southern Downs Regional Council. [USQ Project] (Unpublished)

Kennedy, Jotham Ariel (2010) Experimental investigation into the uplift capacity of ground anchors in sand. [USQ Project] (Unpublished)

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Douglas, Steven (2010) Fibre composite sandwich beam: an alternative to railway turnout sleeper? In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Zhuge, Y. (2010) FRP-retrofitted URM walls under in-plane shear: review and assessment of available models. Journal of Composites for Construction, 14 (6). pp. 743-753. ISSN 1090-0268

Tawfik, Qaidar and Karunasena, Warna (Karu) (2010) Use of CFRP for rehabilitation of steel structures: a review. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Banerjee, S. and Battley, M. and Bhattacharyya, D. (2010) Shear strength optimization of reinforced honeycomb core materials. Mechanics of Advanced Materials and Structures, 17 (7). pp. 542-552. ISSN 1537-6494

Cox, Jeremy Neil (2010) Advantages and practicality of using a 2D hydrodynamic model in comparison to a 1D hydrodynamic model in a flood prone area. [USQ Project] (Unpublished)

Rowlings, David Selwyn (2010) An experimental and theoretical investigation of side weirs. [USQ Project] (Unpublished)

Skipworth, Julian (2010) An investigation and quantitative analysis of the impacts on stream flow and fluvial erosion associated with urbanisation of a small catchment. [USQ Project] (Unpublished)

Shaw, Mark Andrew (2010) An investigation of roles and development pattern of regional airports, Queensland Australia. [USQ Project] (Unpublished)

Palmer, Matthew Alan (2010) Analysis of the feasibility of a 3D model for use in civil construction (creating a 3D model for the first span of a bridge). [USQ Project] (Unpublished)

Aravinthan, Vasantha and Worden, John (2010) Animations as a tool for enhancing teaching and learning outcomes in civil engineering courses. In: FIE 2010: Celebrating 40 Years of Innovation, 27-30 Oct 2010, Washington, DC. United States.

Coe, Daniel (2010) Asset management for Tamworth Regional Council’s sewer network. [USQ Project] (Unpublished)

Stanton, Dale John (2010) Atterberg limits and their relationship to longitudinal cracking in granular pavements. [USQ Project] (Unpublished)

Fahey, Lawrence John (2010) Decision support system for assessing the benefits of incorporating swabbing facilities into water pipelines. [USQ Project] (Unpublished)

Lewers, Glyn Alan (2010) Design of a frame/structure for a large wastewater treatment pond. [USQ Project] (Unpublished)

Daly, James (2010) Design, construction and performance of buildings foundations on soft clays in the Brisbane region. [USQ Project] (Unpublished)

Martin, Joseph A. (2010) Driving problems encountered in the UAE by newly arrived expatriates and tourists. [USQ Project] (Unpublished)

Caunce, Catherine May (2010) Effective road pavement design for expansive soils in Ipswich. [USQ Project] (Unpublished)

Bailey, Thomas Sullivan (2010) Environmentally friendly natural waste materials for use in civil structures. [USQ Project] (Unpublished)

Gibson, David Eric (2010) Evaluating comparative performance of various shaped bridge piers: experimental investigation of sediment transport and scouring. [USQ Project] (Unpublished)

Gould, Adam Mark (2010) Finite volume solution of the unsteady free surface flow equations. [USQ Project] (Unpublished)

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) Flexural behaviour of glue-laminated fibre composite sandwich beams. Composite Structures, 92 (11). pp. 2703-2711. ISSN 0263-8223

Smith, R. J. and Gillies, M. H. (2010) Head ditch hydraulics and the variability of inflows to irrigation furrows. Irrigation and Drainage, 59 (4). pp. 442-452. ISSN 1531-0353

Pufelski, Nadine (2010) How effective is microalgae treatment of different wastewaters for simultaneous nutrient removal and lipid production for bio-fuel? [USQ Project] (Unpublished)

Hanson, Scott (2010) Improvement and performance of pavement gravels used by Toowoomba Regional Council for unsealed roads. [USQ Project] (Unpublished)

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) In-plane shear behaviour of fibre composite sandwich beams using asymmetrical beam shear test. Construction and Building Materials, 24 (10). pp. 1952-1960. ISSN 0950-0618

Malvern, Jerome Liam (2010) Investigation of high impact capacity composite material for civil infrastructure. [USQ Project] (Unpublished)

Zanetti, Ashley (2010) Investigation of pavement design for low volume rural roads. [USQ Project] (Unpublished)

Barnett, Paul Jonathan (2010) Life cycle assessment (LCA) of liquefied natural gas (LNG) and its environmental impact as a low carbon energy source. [USQ Project] (Unpublished)

Magarry, Anthony John (2010) Management of physical assets – advanced asset management planning. [USQ Project] (Unpublished)

Elphinstone, Aaron Daniel (2010) Optimisation of pigging infrastructure in design. [USQ Project] (Unpublished)

Abeysekera, Vasantha (2010) Output characteristics of 'Chapparu' brickwork. Engineer: Journal of the Institution of Engineers, Sri Lanka, 43 (4). pp. 57-74. ISSN 1800-1122

Davies, Neil (2010) Pedestrian characteristics and control for the Toowoomba city centre master plan area. [USQ Project] (Unpublished)

Frazer, Peter (2010) Relational contracting – investigation of relational contracting behaviours across various project delivery models. [USQ Project] (Unpublished)

Turner, Alan (2010) Structural performance of cross laminated timber panels as walls. [USQ Project] (Unpublished)

Pola, Nigel Peter (2010) Synthesis of modified phenolic resins using renewable materials for advanced composites in civil engineering structures. [USQ Project] (Unpublished)

Cameron, Kirsty (2010) Technical feasibility of a salinity trading scheme for the licensing of coal mine discharges in the Fitzroy Basin. [USQ Project] (Unpublished)

Marstella, Joseph Edward (2010) The concept, analysis and critical thinking involved in flow net theory - a project based learning approach using cofferdams. [USQ Project] (Unpublished)

Harch, Brian Joseph Luke (2010) The investigation into the optimisation of cross laminated timber panels for use in the Australia building industry. [USQ Project] (Unpublished)

Seccombe, Andrew James (2010) The use of Fibre Bragg Grating (FBG) sensors in geotechnical applications. [USQ Project] (Unpublished)

Somasundaraswaran, Kathirgamalingam and Bullen, Frank and Ayers, Ron (2010) The use of road safety target setting in fatality and injury reduction. In: 24th Australian Road Research Board Conference (ARRB 2010) , 12-15 Oct 2010, Melbourne, Australia.

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2010) Cost optimum design of structural fibre composite sandwich panel for flooring applications. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

Aravinthan, Thiru (2010) Challenges in the design and delivery of an online postgraduate course in fibre composites. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

McCarthy, Alison and Hancock, Nigel and Raine, Steven (2010) Holistic control system design for large mobile irrigation machines. In: M2VIP 2010: Annual Conference on Mechatronics and Machine Vision in Practice, 22-24 Jun 2010, Darussalam, Brunei.

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Warna (2010) Shear behavior of glue-laminated composite sandwich beams. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

Padhi, Jyotiprakash and Payero, Jose and Misra, R. K. (2010) Measuring the effect of water stress on wheat evapotranspiration. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-10 June 2010, Sydney, Australia.

Padhi, Jyotiprakash and Misra, R. K. and Payero, Jose (2010) Prospects of using infrared thermography for irrigation scheduling of wheat crop. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-10 June 2010, Sydney, Australia.

Maraseni, Tek N. and Cockfield, Geoff and Maroulis, Jerry and Chen, Guangnan (2010) An assessment of greenhouse gas emissions from the Australian vegetables industry. Journal of Environmental Science and Health. Part B: Pesticides, Food Contaminants, and Agricultural Wastes, 45 (6). pp. 578-588. ISSN 0360-1234

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna (2010) Behaviour of structural glulam beams from sustainable fibre composite sandwich panels. In: 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference (CECAR5 and ASEC2010): Innovative Community Building, 8-12 Aug 2010, Sydney, Australia.

Hussain, Amjed and Raine, Steven R. (2010) Can electromagnetic induction be used to evaluate sprinkler irrigation uniformity for a shallow rooted crop? In: WCSS 2010: Solutions for a Changing World, 1-6 Aug 2010, Brisbane, Australia.

Aravinthan, Thiru and Manalo, Allan and Douglas, Steve (2010) Development of a fibre composite turnout sleeper. In: 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference (CECAR5 and ASEC2010): Innovative Community Building, 8-12 Aug 2010, Sydney, Australia.

Uddin, Jasim and Smith, Rod and Hancock, Nigel and Foley, Joseph P. (2010) Droplet evaporation losses during sprinkler irrigation: an overview. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-11 Jun 2010, Sydney, Australia.

Ghabraie, Kazem and Chan, Ricky and Huang, Xiaodong and Xie, Yi Min (2010) Shape optimization of metallic yielding devices for passive mitigation of seismic energy. Engineering Structures, 32 (8). pp. 2258-2267. ISSN 0141-0296

Nawi, Nazmi Mat and Chen, Guangnan and Zare, Dariush (2010) The effect of different climatic conditions on wheat harvesting strategy and return. Biosystems Engineering, 106 (4). pp. 493-502. ISSN 1537-5110

Aravinthan, Vasantha and Aravinthan, Thiru (2010) Effectiveness of self-assessment quizzes as a learning tool. In: EE 2010: Inspiring the Next Generation of Engineers , 6-8 Jul 2010, Birmingham, UK.

Awad, Ziad K. and Gonzalez, Felipe and Aravinthan, Thiru (2010) Advanced robust design optimization of FRP sandwich floor panels. IOP Conference Series: Materials Science and Engineering, 10 (1). 012182,1-012182,9. ISSN 1757-899X

Aravinthan, Vasantha (2010) Designing an ideal assessment scheme for dual mode delivery. In: EE 2010: Inspiring the Next Generation of Engineers, 6-8 Jul 2010, Birmingham, UK.

Guoth, Adrienn and Benyo, Daniel and Csiszar, Jolan and Galle, Agnes and Horvath, Ferenc and Cseuz, Laszlo and Erdei, Laszlo and Tari, Irma (2010) Relationship between osmotic stress-induced abscisic acid accumulation, biomass production and plant growth in drought-tolerant and -sensitive wheat cultivars. Acta Physiologiae Plantarum, 32 (4). pp. 719-727. ISSN 0137-5881

Watt, A. C. and Aziz, S. M. and Banhazi, T. M. (2010) Air pollution and livestock production. In: CIGR 2010: Sustainable Biosystems Through Engineering, 13-17 Jun 2010, Quebec City, Canada.

Symes, Troy and Brink, Gavin (2010) A scalable distribution system for the optimal application of evaporation-suppressant film to farm dams. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-10 June 2010, Sydney, Australia.

McCarthy, Alison and Hancock, Nigel and Raine, Steven R. (2010) Simulation of adaptive site-specific irrigation control performance with spatially variable rainfall. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-10 Jun 2010, Sydney, Australia.

Koech, Richard and Raine, Steven R. (2010) The effect of irrigation non-uniformity on carrot production. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-10 Jun 2010, Sydney, Australia.

Brodie, Ian M. and Dunn, Peter K. (2010) Commonality of rainfall variables influencing suspended solids concentrations in storm runoff from three different urban impervious surfaces. Journal of Hydrology, 387 (3-4). pp. 202-211. ISSN 0022-1694

Rao, Sanjeev and Banerjee, Sourish and Jayaraman, Krishnan and Bhattacharyya, Debes (2010) Compressive behavior of fibre reinforced honeycomb cores. In: 2008 IUTAM Symposium on Multi-Functional Material Structures and Systems, 10-12 Dec 2008, Bangalore, India.

Khabbaz, Borzoo Ghareei and Chen, Guangnan and Baillie, Craig (2010) Energy and greenhouse gas emissions of Australian cotton: from field to fabric. In: CIGR 2010: Sustainable Biosystems Through Engineering, 13-17 Jun 2010, Quebec City, Canada.

Ismail, S. A. and Chen, G. and Baillie, C. and Symes, T. (2010) Energy usage for cotton ginning in Australia. In: CIGR 2010: Sustainable Biosystems Through Engineering, 13-17 Jun 2010, Quebec City, Canada.

Koech, R. K. and Smith, R. J. and Gillies, Malcolm H. (2010) Furrow irrigation in the Australian cotton industry: alternative water delivery systems and their potential for automation. Technical Report. University of Southern Queensland, National Centre for Engineering in Agriculture, Toowoomba, Australia.

Koech, R. K. and Smith, R. J. and Gillies, Malcolm H. (2010) Hydraulic characteristics of large diameter gated flexible fluming. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-10 June 2010, Sydney, Australia.

Symes, Troy and Hancock, Nigel and Schmidt, Erik (2010) Reliable, modest-cost seepage and evaporation measurement for farm dams using 'EvapCalc'. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-10 June 2010, Sydney, Australia. (Unpublished)

McCarthy, Alison and Hancock, Nigel and Raine, Steven R. (2010) Simulation of site-specific irrigation control strategies with sparse input data. In: CIGR 2010: Sustainable Biosystems Through Engineering, 13-17 Jun 2010, Quebec City, Canada.

Jensen, T. and Baillie, C. and Bramley, R. and Di Bella, L. and Whiteing, C. and Davis, R. (2010) Assessment of sugarcane yield monitoring technology for precision agriculture. In: 32nd Annual Conference of the Australian Society of Sugar Cane Technologists, 11-14 May 2010, Bundaberg, Australia.

Choi, Daniel and Abeysekera, Vasantha and Ramachandra, Thanuja (2010) Security of final account payments: the case of New Zealand. In: CIB World Congress 2010: Building a Better World, 10-13 May 2010, Salford Quays, United Kingdom.

Misra, R. K. and Patel, Jishiv H. and Baxi, Vijay (2010) Reuse potential of laundry greywater for irrigation based on growth, water and nutrient use of tomato. Journal of Hydrology, 386 (1-4). pp. 95-102. ISSN 0022-1694

Ghabraie, Kazem and Xie, Yi Min and Huang, Xiaodong and Ren, Gang (2010) Shape and reinforcement optimization of underground tunnels. Journal of Computational Science and Technology, 4 (1). pp. 51-63.

Chen, Guangnan and Maraseni, Tek and Yang, Zhou (2010) Life cycle energy and carbon footprint assessments: agricultural and food products. In: Capehart, Barney L., (ed.) Encyclopedia of energy engineering and technology. Taylor & Francis , London, United Kingdom, pp. 1-5. ISBN 978-0-8493-3653-9

Guan, Lisa and Chen, Guangnan (2010) Solar energy: utilization in building operations. In: Capehart, Barney L., (ed.) Encyclopedia of energy engineering and technology. Taylor & Francis Books, London, United Kingdom, pp. 1-7. ISBN 978-0-8493-3653-9

Hoque, M. A. and Aravinthan, V. and Pradhan, N. M. (2010) Calibration of biokinetic model for acetate biodegradation using combined respirometric and titrimetric measurements. Bioresource Technology, 101 (5). 1426-1434 . ISSN 0960-8524

Nawi, Nazmi Mat and Chen, Guangnan and Zare, Dariush (2010) Economics of using aerated storage to minimise the impact of weather damage during wheat harvesting. Biosystems Engineering, 105 (3). pp. 323-331. ISSN 1537-5110

Manalo, A. C. and Aravinthan, T. and Karunasena, W. and Islam, M. M. (2010) Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions. Composite Structures, 92 (4). 984-995 . ISSN 0263-8223

Erdei, Laszlo and Vigneswaran, Saravanamuthu and Kandasamy, Jaya K. (2010) Modelling of submerged membrane flocculation hybrid systems using statistical and artificial neural networks methods. Journal of Water Supply: Research and Technology, 59 (2-3). pp. 198-208. ISSN 1606-9935; 0003-7214

Manalo, A. and Aravinthan, T. and Karunasena, W. and Ticoalu, A. (2010) A review of alternative materials for replacing existing timber sleepers. Composite Structures, 92 (3). pp. 603-611. ISSN 0263-8223

Kolbert, Zsuzsanna and Ortega, Leandro and Erdei, Laszlo (2010) Involvement of nitrate reductase (NR) in osmotic stress-induced NO generation of arabidopsis thaliana l. roots. Journal of Plant Physiology, 167 (1). pp. 77-80. ISSN 0176-1617

Cooper, Mark Dennis (2010) Improve waste recycling potential through the conversion of normal household waste into biogas. [USQ Project] (Unpublished)

Hansen, Leigh (2010) Quantifying the reduction in hydraulic conductivity of disturbed soil columns as a function of the salinity and sodicity of applied water. [USQ Project] (Unpublished)

Brink, Gavin and Wandel, Andrew P. and Pittaway, Pam and Hancock, Nigel and Pather, Selvan (2010) A ‘universal design framework’ for installation planning and operational management of evaporation-suppressing films on agricultural reservoirs. In: International Conference on Agricultural Engineering: Towards Environmental Technologies, 6-8 September 2010, Clermont-Ferrand, France. (Unpublished)

Aravinthan, Vasantha (2010) Design of public health engineering course using multimedia resources for dual mode delivery. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Zhang, X. and Abawi, Yahya and Dutta, Sunil and McClymont, David (2010) Developing ENSO-based irrigation water forecast system in a region with limited hydro-meteorological observations to mitigate the impacts of climate variability: a case study in Lombok, Indonesia. In: Climate Adaptation Futures: Preparing for the Unavoidable Impacts of Climate Change, 29 Jun-1 Jul 2010, Gold Coast, Australia.

Hoque, Muhammad A. (2010) Development and calibration of bio-kinetic models for organic carbon and nitrogen biodegradation in an aerobic activated sludge system. [Thesis (_PhD/Research)] (Unpublished)

Hasna, Abdallah M. (2010) Embedding sustainability in capstone engineering design projects. In: EDUCON 2010: The Future of Global Learning in Engineering Education, 14-16 Apr 2010, Madrid, Spain.

Suriadi, Ahmad (2010) Field evaluation and modelling of water and nitrogen management strategies in tropical lowland rice-based production systems. [Thesis (_PhD/Research)] (Unpublished)

Banko, Laszlo and Erdei, Laszlo and Ordog, Monika and Mihalik, Erzsebet (2010) Histological comparison of the rhizome, leafy culm and aerial rhizome of the common reed (Phragmites australis). Acta Biologica Szegediensis, 54 (1). pp. 15-18. ISSN 1588-385X

Pufelski, N. and Aravinthan, V. and Yusaf, T. (2010) How effective is microalgae treatment of nursery wastewater for nutrient removal? In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Gillies, Malcolm H. and Smith, R. J. and Williamson, Bill and Shanahan, Matthew (2010) Improving performance of bay irrigation through higher flow rates. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-11 June 2010, Sydney, Australia.

Zhuge, Yan (2010) Investigation of the effect of various additives on the strength of environmentally friendly permeable concrete. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Khabbaz, Borzoo Ghareei (2010) Life cycle energy use and greenhouse gas emissions of Australian cotton: impact of farming systems. [Thesis (_PhD/Research)] (Unpublished)

Ivanovich, Grujica S. (2010) Modern distribution network planning and application to development of electricity infrastructure. [Thesis (_PhD/Research)] (Unpublished)

Akbar, Ghani and Hamilton, Greg and Raine, Steven R. (2010) Permanent raised bed configurations and renovation methods affect crop performance. In: WCSS 2010: Soil Solutions for a Changing World, 1-6 Aug 2010, Brisbane, Australia.

Ranjbar, Iraj and Rashidi, Majid and Khabbaz, Borzoo Ghareei (2010) Prediction of repair and maintenance costs of two-wheel tractors in Iran. In: CIGR 2010: Sustainable Biosystems through Engineering, 13-17 Jun 2010, Quebec City, Canada.

Rashidi, Majid and Khabbaz, Borzoo Ghareei (2010) Prediction of total soluble solids and firmness of carrot based on carrot water content. In: CIGR 2010: Sustainable Biosystems Through Engineering, 13-17 Jun 2010, Quebec City, Canada.

Tari, I. and Kiss, G. and Deer, Aranka K. and Csiszar, J. and Erdei, L. and Galle, A. and Gemes, Katalin and Horvath, Ferenc and Poor, Peter and Szepesi, Agota and Simon, L. M. (2010) Salicylic acid increased aldose reductase activity and sorbitol accumulation in tomato plants under salt stress. Biologia Plantarum: Journal for Experimental Botany, 54 (4). pp. 677-683. ISSN 0006-3134

Csiszar, Jolan and Guoth, Adrienn and Kolbert, Zsuzsanna and Galle, Agnes and Tari, Irma and Ciulca, Sorin and Madosa, Emilian and Erdei, Laszlo (2010) Starch to protein ratio and alpha-amylase activities in grains of different wheat cultivars. Acta Biologica Szegediensis, 54 (1). pp. 19-23. ISSN 1588-385X

Tavakkoli, Ehsan and Rengasamy, Pichu and McDonald, Glenn (2010) The response of barley to salinity stress differs between hydroponic and soil systems. Functional Plant Biology, 37 (7). pp. 621-633. ISSN 1445-4408

Somasundaraswaran, Kathirgamalingam (2009) An overview of engineering education in Sri Lanka. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Devine, Jo (2009) Assessable online discussion groups as a student learning tool. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Brodie, I. M. (2009) Australian examples of residential integrated water cycle planning: accepted current practice and a suggested alternative. Desalination and Water Treatment, 12 (1-3). pp. 324-330. ISSN 1944-3994

Islam, M. M. and Aravinthan, T. and Van Erp, G. (2009) Behaviour of innovative fibre composite sandwich panels under point loading. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009) , 9-11 Dec 2009, Seoul, Korea.

Hoque, Muhammad A. and Aravinthan, Vasantha and Pradhan, Nishant M. (2009) Can we decode the messages of activated sludge through the respirograms? Water, Air, and Soil Pollution: Focus, 9 (5/6). pp. 449-459. ISSN 1567-7230

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2009) Flexural behaviour of laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

Zhuge, Yan and Mills, Julie E. (2009) Teaching finite element modelling at the undergraduate level: a PBL approach. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Padhi, Jyotiprakash and Misra, R. K. and Payero, Jose (2009) Use of infrared thermography to detect water deficit response in an irrigated cotton crop. In: International Conference on Food Security and Environmental Sustainability (FSES 2009), 17-19 Dec 2009, Kharagpur, India.

Karunasena, W. and Aravinthan, T. and Manalo, A. C. (2009) Vibration of debonded laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

Cole, Andrew James Shorten (2009) A comprehensive study of footing on c-φ soil slopes - numerical and physical modelling. [USQ Project] (Unpublished)

Lyle, Nathan Ross (2009) Comprehensive design charts for the footing on slope problem. [USQ Project] (Unpublished)

Douglas, Nadine Sarah (2009) Development of an asset maintenance program for Darwin City Council. [USQ Project] (Unpublished)

Mushtaq, Shahbaz and Khan, Shahbaz and Hafeez, Mohsin and Hanjra, Munir A. (2009) Does reliability of water resources matter in the adoption of water-saving irrigation practices? a case study in the Zhanghe irrigation system, China. Water Policy, 11 (6). pp. 661-679. ISSN 1366-7017

Mead, Nicola and Aravinthan, Vasantha (2009) Investigation of household water consumption using smart metering system. Desalination and Water Treatment, 11 (1-3). pp. 115-123. ISSN 1944-3994

Mead, Nicola and Aravinthan, Vasantha (2009) Investigation of household water consumption using smart metering system. In: 2nd Conference on Challenges in Environmental Science and Engineering (CESE-2009): Waste Treatment: Challenges and Solutions, 14-17 Jul 2009, Townsville, Queensland .

Langdon, Aaron G. (2009) Traffic induced moisture entry into road pavements. [USQ Project] (Unpublished)

Zhuge, Yan and Lian, Chunqi (2009) Development of environmentally friendly and structural enhanced permeable concrete pavement material. In: 2009 Southern Engineering Conference: Infrastructure Investment For a New Economy, 17-18 Oct 2009, Springfield, Qld, Australia.

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2009) Finite element analysis of fibre composite sandwich panel. In: Southern Engineering Conference, 17-18 Oct 2009, Springfield, Queensland, Australia.

Hoque, M. A. and Aravinthan, V. and Pradhan, N. M. (2009) Assessment on activated sludge models for acetate biodegradation under aerobic conditions. Water Science and Technology, 60 (4). pp. 983-994. ISSN 0273-1223

Dakers, Nicole (2009) A cost benefit analysis of rural residential water supply – constant flow vs. full pressure. [USQ Project] (Unpublished)

Crone, Jeffrey John (2009) Alternate pavement types on reactive soils in the Ipswich Council area. [USQ Project] (Unpublished)

Plain, Matthew (2009) Behaviour of innovative fibre composite sandwich panels for structural applications. [USQ Project] (Unpublished)

Pickford, Christopher Ian (2009) Behaviour of laminated fibre composite sandwich girders. [USQ Project] (Unpublished)

Mayen, David Ayuen (2009) Composites from natural renewable resources in civil engineering: Epoxidized vegetable oil with epoxy resin, fly ash and sawdust fillers(mechanical, physical and structural properties). [USQ Project] (Unpublished)

Gould, Nicholas (2009) Conceptual design of a sustainable energy-waste solution for the residential sector. [USQ Project] (Unpublished)

Vaipulu, Seini 'Ela Uatekini (2009) Design a prototype solar dryer for drying sea cucumber. [USQ Project] (Unpublished)

Howarth, Rowan (2009) Design and documentation of Bairnsdale regional landfill - Cell 3 Johnston’s Road, Bairnsdale. [USQ Project] (Unpublished)

Althaus, Kimberley (2009) Effect of irrigation management on nitrate movement under a lettuce crop. [USQ Project] (Unpublished)

Burton, Bruce (2009) Griffin Road drainage diversion – feasibility study. [USQ Project] (Unpublished)

Sankowsky, Brendan (2009) Hydraulic conductivity response of soils to synthetic laundry greywater. [USQ Project] (Unpublished)

Taylor, Benjamin Allan (2009) Improving accuracy of rainwater tank hydrologic yield estimation across Queensland. [USQ Project] (Unpublished)

Wu, Chao di (2009) Investigate the best percentage by weight of glass powder, as fillers in phenolic resins by using tensile tests. [USQ Project] (Unpublished)

Shears, Steven Edward (2009) Investigation of life cycle management of electromagnetic flow meters. [USQ Project] (Unpublished)

Bichel, Mitchell Neil (2009) Investigation of the quality management system at Lockyer Valley Regional Council. [USQ Project] (Unpublished)

McMahon, Craig Andrew (2009) Investigation of the quality of water treated by magnetic fields. [USQ Project] (Unpublished)

Saunders, Michael Joseph (2009) Investigation of the relationship between experimental bridge piers and erosion within a flow. [USQ Project] (Unpublished)

Taylor, Alan Owen (2009) Investigation on the fatigue behaviour of pultruded fibre composites. [USQ Project] (Unpublished)

Porter, Hannah Elizabeth (2009) Involvement of older drivers at crashes at unsignalised and signalised intersections. [USQ Project] (Unpublished)

Smith, Travis (2009) Ipswich City Council development assessment: streamlining the process. [USQ Project] (Unpublished)

Taylor, Oliver John (2009) Market segmentation for improved efficiency of Ipswich water supply system. [USQ Project] (Unpublished)

Dann, Jeffrey Michael (2009) Modernisation of an existing irrigation area. [USQ Project] (Unpublished)

Cheung, Hoi-Yan and Ho, Mei-Po and Lau, Kin-Tak and Cardona, Francisco and Hui, David (2009) Natural fibre-reinforced composites for bioengineering and environmental engineering. Composites Part B: Engineering, 40 (7). pp. 655-663. ISSN 1359-8368

Yu, Yu Wah (2009) Pile driving analysis via dynamic loading test. [USQ Project] (Unpublished)

Christensen, Zane Michael (2009) Reduction of local scour around bridge piers: Combined system of aerofoil and slot. [USQ Project] (Unpublished)

Armstrong, Andrew Jonathan (2009) Sealing works performance study. [USQ Project] (Unpublished)

Summerville, Cameron (2009) Structural performance of low grade timber slabs. [USQ Project] (Unpublished)

Baker, Philip James (2009) The 50 kph speed limit in residential Toowoomba. [USQ Project] (Unpublished)

Rennie, Tristan James (2009) The effect of vandalism on fibre composite structures. [USQ Project] (Unpublished)

Fraser, M. J. and Chen, Guangnan and Esdaile, R. J. and Yang, Zhou (2009) Design and modeling of the structural integrity of a universal toolbar for two wheeled power tiller. In: SEAg 2009: Agricultural Technology in a Changing Climate , 13-16 Sep 2009, Brisbane, Australia.

Rashidi, M. and Bahri, M. H. and Khabbaz, B. G. (2009) Effects of coating methods and storage periods on some quality characteristics of carrot during ambient storage. In: SEAg 2009: Agricultural Technologies In a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Mohammad Zamani, D. and Rashidi, M. and Ghareei Khabbaz, B. (2009) Generation digital management map for herbicide application in VRA spraying by using GPS. In: SEAg 2009: Agricultural Technology in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Rashidi, M. and Khabbaz, B. G. (2009) Response of crop yield and yield components of tomato to different tillage methods in the arid lands of Varamin, Iran. In: SEAg 2009: Agricultural Technology in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Hussain, A. and Raine, S. R. and Smith, R. J. (2009) The economics of sprinkler irrigation uniformity for lettuce production with in-season rainfall. In: SEAg 2009: Agricultural Technologies in a Changing Climate , 13-16 Sep 2009, Brisbane, Queensland.

Suriadi, Ahmad and Gaydon, Donald and Abawi, Yahya and Misra, R. K. (2009) Capability of APSIM-Oryza to stimulate lowland rice-based farming systems under nitrogen treatments in a tropical climate. In: 2nd Biennial International Symposium on Farming Systems Design: Methodologies for Integrated Analysis of Farm Production Systems, 23-26 Aug 2009, Monterey, CA. USA.

Suriadi, Ahmad and Misra, R. K. and Gaydon, Donald and Abawi, Yahya (2009) Performance of rice on a coarse sandy loam soil in response to water-saving irrigation practices in lowland eastern Indonesia. In: 2nd Biennial International Symposium on Farming Systems Design: Methodologies for Integrated Analysis of Farm Production Systems, 23-26 August 2009, Monterey, California, USA.

Zare, Dariush and Chen, Guangnan (2009) Evaluation of a simulation model in predicting the drying parameters for deep-bed paddy drying. Computers and Electronics in Agriculture, 68 (1). pp. 78-87. ISSN 0168-1699

Ezlit, Younes Daw (2009) Modelling the change in conductivity of soil associated with the application of saline-sodic water. [Thesis (_PhD/Research)] (Unpublished)

Manalo, Allan and Mutsuyoshi, Hiroshi and Aravinthan, Thiru and Matsui, Takahiro (2009) Behaviour of hybrid FRP composite I-girder with concrete deck. In: FRPRCS-9: Current Challenges and Future Trends, 13-15 July 2009, Sydney, Australia.

Chen, Guangnan and Baillie, Craig Peter and Kupke, Paul (2009) Evaluating on-farm energy performance in agriculture. Australian Journal of Multi-Disciplinary Engineering, 7 (1). pp. 55-62. ISSN 1448-8388

Brodie, I. M. and Misra, R. K. (2009) Evaluation of greenwaste mulch to control runoff quality from landfill sites during frequent storms. Water, Air and Soil Pollution, 201 (1-4). pp. 75-85. ISSN 0049-6979

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Islam, Mainul (2009) Flexural behaviour of composite sandwiches for structural applications. In: FRPRCS-9: Current Challenges and Future Trends, 13-15 Jul 2009, Sydney, Australia.

Brodie, Ian M. and Dunn, Peter K. (2009) Suspended particle characteristics in storm runoff from urban impervious surfaces in Toowoomba, Australia. Urban Water Journal, 6 (2). pp. 137-146. ISSN 1573-062X

Chen, Guangnan and Baillie, Craig (2009) Development of a framework and tool to assess on-farm energy uses of cotton production. Energy Conversion and Management, 50 (5). pp. 1256-1263. ISSN 0196-8904

Chen, Guangnan and Baillie, Craig (2009) Agricultural applications: energy uses and audits. In: Capehart, Barney L., (ed.) Encyclopedia of Energy Engineering and Technology. Taylor & Francis , London, United Kingdom, pp. 1-5. ISBN 978-0-8493-3653-9

de Almeida, Ceres Duarte Guedes Cabral and Botrel, Tarlei Arriel and Smith, R. J. (2009) Characterisation of the micro-tube emitters used in a novel micro-sprinkler. Irrigation Science, 27 (3). pp. 209-214. ISSN 0342-7188

Navabian, M. and Liaghat, A. M. and Smith, R. J. and Abbasi, F. (2009) Empirical functions for dependent variables in cutback furrow irrigation. Irrigation Science, 27 (3). pp. 215-222. ISSN 0342-7188

de Almeida, B. G. and da Silva, A. P. and Raine, Steven R. and Figueiredo, G. C. (2009) Evaluation of automotive varnish as a coating for density measurements of soil clods. Journal of the Soil Science Society of America, 73 (2). pp. 449-452. ISSN 0361-5995

Liang, Qing Quan (2009) Performance-based analysis of concrete-filled steel tubular beam–columns, part I: theory and algorithms. Journal of Constructional Steel Research, 65 (2). pp. 363-372. ISSN 0143-974X

Liang, Qing Quan (2009) Performance-based analysis of concrete-filled steel tubular beam–columns, part II: verification and applications. Journal of Constructional Steel Research, 65 (2). pp. 351-362. ISSN 0143-974X

Davis, Kieren Peter (2009) Application of an urban runoff model using surface specific parameters. [USQ Project] (Unpublished)

Houghton, Richard (2009) Impact of tailings subsidence on rehabilitated landform erosional stability. [USQ Project] (Unpublished)

Brodie, Ian and Brodie, Lyn (2009) A knowledge-information-data concept model for engineering education. Australasian Journal of Engineering Education, 15 (3). pp. 137-144. ISSN 1324-5821

Baillie, Craig Peter and Chen, Guangnan (2009) A methodology for on farm energy assessment. In: 2009 RIRDC Life Cycle Assessment Workshop, 13 May 2009, Canberra, ACT.

Shinozaki, H. and Pandey, G. R. and Mutsuyoshi, H. and Aravinthan, T. (2009) AFRP retrofitting of RC structures in Japan. In: ACMSM20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Ticoalu, A. and Aravinthan, T. and Karunasena, W. (2009) An investigation on the stiffness of timber sleepers for the design of fibre composite sleepers. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Ismail, Siti Amni (2009) Assessment of energy usage for cotton gins in Australia. [Thesis (_PhD/Research)] (Unpublished)

Grabham, Michael and Hornbuckle, John and Raine, Steven R. and Smith, Rod (2009) Bankless channel irrigation systems: irrigation performance assessment. In: Irrigation Australia 2009: Irrigation Australia Irrigation and Drainage Conference: Irrigation Today - Meeting the Challenge, 18-21 Oct 2009, Swan Hill, Australia.

Zhuge, Yan and Yeap, Kai (2009) Debonding characteristics of masonry structures retrofitted with FRP. In: 17th Annual International Conference on Composites or Nano Engineering ICCE17, 26 Jul-1 Aug 2009, Honolulu, Hawaii, USA.

Omar, T. and Aravinthan, T. (2009) Design and development of a fibre composite windmill structure. Australian Journal of Structural Engineering, 10 (1). pp. 25-36. ISSN 1328-7982

Brink, Gavin and Symes, Troy and Hancock, Nigel (2009) Development of a 'smart' monolayer application system for reducing evaporation from farm dams: introductory paper. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Rees, Steven and McCarthy, Cheryl and Artizzu, Xavier and Baillie, Craig and Dunn, Mark (2009) Development of a prototype precision spot spray system using image analysis and plant identification technology. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Yang, Zhou and Chen, Guangnan and Duan, J. and Peng, T. and Wang, J. (2009) Development strategy of agricultural machinery based on energy-saving in China. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Smith, R. J. and Gillies, Malcolm H. and Shanahan, Matthew and Campbell, B. and Williamson, Bill (2009) Evaluating the performance of bay irrigation in the GMID. In: Irrigation Australia 2009: Irrigation Australia Irrigation and Drainage Conference: Irrigation Today - Meeting the Challenge, 18-21 Oct 2009, Swan Hill, Victoria. (Unpublished)

Ismail, Siti Amni and Chen, Guangnan and Baillie, Craig and Symes, Troy (2009) Evaluation of energy usage for cotton ginning processes. In: SEAg 2009: Agricultural Technology in a Changing Climate, 13-16 Sep 2009, Brisbane, Queensland.

Hancock, Nigel and Symes, Troy (2009) EvapCalc – a modest-cost technique for real-time measurement of evaporation (and seepage) from farm dams. In: IWER 2009: International Workshop on Evaporation from Reservoirs, 9-11 Dec 2009, Gold Coast, Australia. (Unpublished)

Omar, T. and Aravinthan, T. (2009) Fibre composite wind mill structure - investigations and design considerations. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao, eds. (2009) Futures in mechanics of structures and materials: proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), Toowoomba, Australia, 2-5 December 2008. Taylor & Francis (CRC Press), London, UK. ISBN 978-0-415-49196-9

Padhi, Jyotiprakash (2009) Incorporating spatial variability in soil and crop properties for effective irrigation. [Thesis (_PhD/Research)] (Unpublished)

Karunasena, W. and Leitch, C. J. (2009) Investigation on role and function of noggings in residential timber frame construction. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Smith, R. J. and Raine, Steven R. and McCarthy, Alison and Hancock, Nigel (2009) Managing spatial and temporal variability in irrigated agriculture through adaptive control. Australian Journal of Multi-Disciplinary Engineering, 7 (1). pp. 79-90. ISSN 1448-8388

Manalo, A. C. and Mutsuyoshi, H. and Asamoto, S. and Aravinthan, T. and Matsui, T. (2009) Mechanical behavior of hybrid FRP composites with bolted joints. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Padhi, Jyotiprakash and Misra, R. K. (2009) Monitoring spatial variation of soil moisture in crop fields with EM38. In: Irrigation Australia 2009: Irrigation Australia Irrigation and Drainage Conference: Irrigation Today - Meeting the Challenge, 18-21 Oct 2009, Swan Hill, Australia.

White, Simon C. and Raine, Steven R. (2009) Physiological response of cotton to a root zone soil moisture gradient: implications for partial root zone drying irrigation. Journal of Cotton Science, 13 (2). pp. 67-74. ISSN 1523-6919

Achmad, Mahmud (2009) Predicting the effects of mechanical destratifiers on water quality in Toowoomba’s reservoirs. [Thesis (_PhD/Research)] (Unpublished)

Seilsepour, Mohsen and Rashidi, Majid and Khabbaz, Borzoo Ghareei (2009) Prediction of soil exchangeable sodium percentage based on soil sodium adsorption ratio. American-Eurasian Journal of Agricultural and Environmental Sciences, 5 (1). pp. 1-4. ISSN 1818-6769

Schmidt, Erik (2009) Reducing evaporation losses - opportunities for cost effective water savings. In: Irrigation Australia 2009: Irrigation Australia Irrigation and Drainage Conference: Irrigation Today - Meeting the Challenge, 18-21 Oct 2009, Swan Hill, Australia.

Misra, R. K. and Patel, Jishiv H. and Baxi, V. R. (2009) Removal of pollutants by tomato plants during reuse of laundry greywater for irrigation. In: International Conference on Food Security and Environmental Sustainability (FSES 2009), 17-19 December 2009, Kharagpur, India.

Rashidi, Majid and Gholami, Mohammad and Ghareei Khabbaz, Borzoo (2009) Response of yield and yield components of tomato (Lycopersicon esculentum) to different tillage methods. International Journal of Agriculture and Biology, 11 (5). pp. 626-630. ISSN 1560-8530

Eckard, Lawrence Francois (2009) Setting up an engineering asset management system for a small local government council. [USQ Project] (Unpublished)

Hasna, Abdallah M. (2009) Sustainability philosophy in engineering context: review and discussion. [Thesis (_PhD/Research)] (Unpublished)

Attwood, Simon John (2009) The impacts of agricultural intensification on arthropod assemblages at global and local scales. [Thesis (_PhD/Research)] (Unpublished)

Jensen, Troy and Apan, Armando and Zeller, Leslie (2009) The use of a UAV as a remote sensing platform in agriculture. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Aravinthan, Thiru, ed. (2008) Fibre composites in civil infrastructure - past, present and future. University of Southern Queensland, Toowoomba, Australia.

Karunasena, W. (2008) Elastodynamic reciprocity relations for wave scattering by flaws in fiber-reinforced composite plates. Journal of Mechanics of Materials and Structures, 3 (10). pp. 1831-1846. ISSN 1559-3959

Hoque, M. A. and Aravinthan, V. and Pradhan, N. M. (2008) Evaluation of simultaneous storage and growth model to explain aerobic biodegradation of acetate. In: ISBT 2008: 1st International Society of BioTechnology Conference, 28-30 Dec 2008, Gangtok, India.

Shiau, Jim S. and Augarde, Charles E. and Lyamin, Andrei V. and Sloan, Scott W. (2008) Finite element limit analysis of passive earth resistance in cohesionless soils. Soils and Foundations, 48 (6). pp. 843-850. ISSN 0038-0806

Hoque, M. A. and Aravinthan, V. and Porter, M. (2008) Respirometric and titrimetric techniques for monitoring aerobic biodegradation of surfactant. In: ISBT 2008: 1st International Society of BioTechnology Conference, 28-30 Dec 2008, Gangkor, India.

Shiau, J. S. and Watson, J. F. (2008) 3D bearing capacity of shallow foundations located near deep excavation sites. In: 2008 International Conference on Deep Excavation: Challenges Risk Management of Underground Construction (ICDE 2008), 10-12 Nov 2008, Singapore.

Arnold, Matthew David (2008) A two-dimensional analysis of the bearing capacity of footings near slopes. [USQ Project] (Unpublished)

Vincec, Paul Michael (2008) Feasibility study: into the design, effectiveness & limitations of installing raingardens within an inner urban environment. [USQ Project] (Unpublished)

Watson, Joshua Francis (2008) Investigation of the bearing capacity of shallow footings located near slopes. [USQ Project] (Unpublished)

Golshani, Aliakbar and Tran-Cong, Thanh (2008) Simulation of hydraulic fracturing in brittle rocks. In: ISRM International Symposium 2008: 5th Asian Rock Mechanics Symposium, 24-26 Nov 2008, Tehran, Iran.

Jesshope, Ashlee Elizabeth (2008) Bike tour plan for Toowoomba region. [USQ Project] (Unpublished)

Shann, Blaise N. (2008) Variable rate bitumen spraying in road construction and resurfacing. [USQ Project] (Unpublished)

Boskovic, Selina (2008) Bioretention basin best practice design guidelines. [USQ Project] (Unpublished)

Alanne, Glen (2008) Developing a model to predict water main failures. [USQ Project] (Unpublished)

McHugh, A. D. and Bhattarai, S. and Lotz, G. and Midmore, D. J. (2008) Effects of subsurface drip irrigation rates and furrow irrigation for cotton grown on a vertisol on off-site movement of sediments, nutrients and pesticides. Agronomy for Sustainable Development, 28 (4). pp. 507-519. ISSN 1774-0746

Donohue, Rachael Michelle (2008) Inspiring high precision dam water depth measurement with novel 'bubbler’ designs. [USQ Project] (Unpublished)

Gibson, Duane Nikalia (2008) Interaction of recycled concrete and geogrid reinforcement material 14m high reinforced earth wall. [USQ Project] (Unpublished)

Hardy, Glen (2008) Investigation into the performance of first flush systems for diesel engine based pollution on roof runoff. [USQ Project] (Unpublished)

Walters, Kieren A. (2008) Investigation of construction practices and test procedures for road pavements on expansive subgrades. [USQ Project] (Unpublished)

Huston, Thomas Clifford (2008) Investigation on the adequacy of disinfection in Toowoomba's water supply network. [USQ Project] (Unpublished)

Rohde, Craig (2008) Preliminary water balance models of the Daly river catchment. [USQ Project] (Unpublished)

Whiteford, Mark (2008) Relationship contracting in the mineral processing industry. [USQ Project] (Unpublished)

Taylor, Timothy Noel (2008) Rural arterial road operating speed assessment. [USQ Project] (Unpublished)

Goodall, Joshua Edward Allan (2008) The effect of the 50km/h implementation on local streets in Toowoomba. [USQ Project] (Unpublished)

Drysdale, Dirk MacDonald (2008) The effectiveness of an aerofoil shaped pier reducing down stream vortices and turbulance. [USQ Project] (Unpublished)

Waldock, David A. (2008) The maintenance of 'moment continuity' within structural concrete beam steps. [USQ Project] (Unpublished)

Adams, Nicholas John (2008) The pedestrianisation of inner city Toowoomba. [USQ Project] (Unpublished)

Ole, Zayne Kristian (2008) Track stability and buckling - rail stress management. [USQ Project] (Unpublished)

Shellshear, Michael Stuart (2008) Urban stormwater treatment using chitosan. [USQ Project] (Unpublished)

Watt, Andrew Thomas (2008) Validation of cooling grid model and testing of alternatives. [USQ Project] (Unpublished)

Shiau, Jim S. and Thomas, Caroline J. and Smith, Catherine A. (2008) A FLAC model for classical earth pressure problems. In: 1st International FLAC/DEM Symposium on Numerical Modeling, 25-27 Aug 2008, Minneapolis, United States.

Shiau, Jim S. and Watson, Joshua F. and Smith, C. A. (2008) Foundation located near slope: a FLAC study. In: 1st International FLAC/DEM Symposium on Numerical Modeling, 25-27 Aug 2008, Minneapolis, USA.

Brodie, Ian (2008) Comparison of storage requirements for two different stormwater harvesting strategies. In: Stormwater 2008, 8-11 July 2008, Surfers Paradise, Australia.

Langat, P. K. and Smith, R. J. and Raine, S. R. (2008) Estimating the furrow infiltration characteristic from a single advance point. Irrigation Science, 26 (5). pp. 367-374. ISSN 0342-7188

Aravinthan, Thiru and Omar, Tarek (2008) Fibre composite windmill structure - challenges in the design and development. In: CICE 2008: 4th International Conference on FRP Composites in Civil Engineering, 22-24 Jul 2008, Zurich, Switzerland.

Everingham, Yvette and Baillie, Craig and Inman-Bamber, Geoff and Baillie, Justine (2008) Forecasting water allocations for Bundaberg sugarcane farmers. Climate Research, 36 (3). pp. 231-239. ISSN 0936-577X

Somasundaraswaran, A. K. (2008) Results of surveys among drivers and customers of for-hire three-wheelers in five small towns in Sri Lanka. Asia Pacific Development Journal, 15 (1). pp. 119-135. ISSN 1020-1246

Dorner, W. and Porter, M. and Metzka, R. (2008) Are floods in part a form of land use externality? Natural Hazards and Earth System Sciences, 8 (3). pp. 523-532. ISSN 1561-8633

Foley, Joseph P. (2008) Centre pivot and lateral move machines. In: Smith, Peter and Madden, Elizabeth, (eds.) WATERpak: a guide for irrigation management in cotton. Cotton Research and Development Corporation, Narrabri, Australia, pp. 195-220. ISBN 1-921025-16-6

Rong, Jian Hua and Liang, Qing Quan (2008) A level set method for topology optimization of continuum structures with bounded design domain. Computer Methods in Applied Mechanics and Engineering, 197 (17-18). pp. 1447-1465. ISSN 0045-7825

Omar, Tarek (2008) Multi-pultrusion fibre composite truss systems for deployable shelters. PhD thesis, University of Southern Queensland.

Liang, Qing Quan (2008) Nonlinear analysis of short concrete-filled steel tubular beam-columns under axial load and biaxial bending. Journal of Constructional Steel Research, 64 (3). pp. 295-304. ISSN 0143-974X

Tavakkoli, Ehsan and Rengasamy, Pichu and McDonald, Glenn (2008) A critical analysis of osmotic and ionic effects of salinity in two barley cultivars. In: 14th Australian Agronomy Conference: Global Issues. Paddock Action, 21-25 Sept 2008, Adelaide, South Australia.

Rong, J. H. and Yi, J. H. and Liang, Q. Q. (2008) A level set method with maximum design domain limits. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Omar, Tarek and Aravinthan, Thiru (2008) Design and development of a fibre composite wind mill structure. In: Australasian Structural Engineering Conference 2008: Engaging with Structural Engineering, 26-27 June 2008, Melbourne, Vic, Australia.

Zare, Dariush and Chen, Guangnan (2008) Development of climate-based computer model to reduce crop harvest losses in Australia. In: AgEng2008: Agricultural and Biosystems Engineering for a Sustainable World, 23-25 Jun 2008, Crete, Greece.

Thorpe, David and Ryan, Neal and Charles, Michael (2008) Environmental sustainability - a driver for innovation in construction SMEs? In: 3rd International Conference of the CRC for Construction Innovation: Clients Driving Innovation: Benefiting from Innovation, 12-14 March 2008, Gold Coast, Australia.

Asamoto, S. and Mutsuyoshi, H. and Aravinthan, T. and Suzukawa, K. (2008) Experimental investigation of innovative hybrid composite girders with GFRP and CFRP. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Brodie, I. M. (2008) Hydrological analysis of single and dual storage systems for stormwater harvesting. Water Science and Technology, 58 (5). pp. 1039-1046. ISSN 0273-1223

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2008) M2S2 modular deployable shelter system: concept and analysis technique. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Gillies, Malcolm H. (2008) Managing the effect of infiltration variability on the performance of surface irrigation. [Thesis (_PhD/Research)] (Unpublished)

Gillies, Malcolm H. and Smith, R. J. and Raine, Steven R. (2008) Measurement and management of furrow irrigation at the field scale. In: Irrigation Australia 2008 - Share the Water, Share the Benefits: Irrigation Australia National Conference and Exhibition, 20-22 May 2008, Melbourne, Australia. (Unpublished)

Liang, Q. Q. and Hadi, M. N. S. (2008) Nonlinear analysis and behavior of concrete-filled steel tubular beam-columns. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Shiau, Jim S. and Watson, Joshua Francis and Arnold, Matthew David (2008) Numerical study of a shallow foundation located near 45 degree slopes. In: ASEM 2008: 4th International Conference on Advances in Structural Engineering and Mechanics , 26-28 May 2008, Jeju, Korea.

Liang, Q. Q. and Ng, A. W. M. (2008) Performance-based optimization of strut-and-tie models in reinforced concrete deep beams. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Seilsepour, Mohsen and Rashidi, Majid and Ghareei Khabbaz, Borzoo (2008) Prediction of soil available phosphorus based on soil organic carbon. American-Eurasian Journal of Agricultural and Environental Science, 4 (2). pp. 189-193. ISSN 1818-6769

Baillie, Craig Peter and Chen, Guangnan (2008) Reducing energy input costs and associated greenhouse gas emissions in cotton. In: 14th Australian Cotton Conference: New Beginnings – Cotton in a Climate of Change , 12-14 Aug 2008, Gold Coast, Australia.

Suntharavadivel, T. G. and Aravinthan, T. (2008) Strengthening of shear damaged RC beams with external clamping. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Brodie, Ian and Rosewell, Colin J. (2008) Using soil loss models to estimate suspended solids concentrations in stormwater runoff from pre-urban areas. Australian Journal of Water Resources, 12 (1). pp. 49-60. ISSN 1324-1583

Cronin, G. M. and Borg, S. S. and Dunn, M. T. (2008) Using video image analysis to count hens in cages and reduce egg breakage on collection belts. Australian Journal of Experimental Agriculture, 48 (7). pp. 768-772. ISSN 0816-1089

Karunasena, Warna (Karu) and Martin, Nicole (2007) The effect of debonding on the flexural behaviour of reinforced concrete beams strengthened with fibre reinforced polymer. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

Thorpe, David and Fulcher, Robert (2007) Experiences in implementing a postgraduate engineering management program. In: AaeE 2007: Connecting Teaching, Research and Industry through Engineering Education, 09-13 Dec 2007, Melbourne, Australia.

Liang, Qing Quan (2007) Automated performance-based optimal design of continuum structures under multiple load cases. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

H'ng, Po Lyn (2007) Comparative study of engineering leadership of senior engineers in Malaysia & Australia within the construction industry. [USQ Project] (Unpublished)

Liang, Qing Quan (2007) Effects of continuum design domains on optimal bracing systems for multistory steel building frameworks. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2007) Innovative all composite multi-pultrusion truss systems: FE modelling and behavioural issues. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

Pandey, G. R. and Mutsuyoshi, H. and Aravinthan, T. (2007) Retrofitting reinforced concrete bridge frames using externally bonded FRP sheets. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

Liang, Qing Quan (2007) Structural design optimization. Advances in Structural Engineering, 10 (6). i-ii. ISSN 1369-4332

Omar, T. and Aravinthan, T. and Van Erp, G. (2007) The effect of core architecture on the behaviour of sandwich columns under edgewise compression loading. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

Aravinthan, Thiru and Suntharavadivel, T. G. (2007) Effects of existing shear damage on externally post tensioned repair of bent caps. Journal of Structural Engineering, 133 (11). pp. 1662-1669. ISSN 0733-9445

O'May, David Victor (2007) A study of pavement performance on the Gatton Bypass Duplication. [USQ Project] (Unpublished)

Wong Wan Sie, Winxie (2007) Analysis and design of curtain wall systems for high rise buildings. [USQ Project] (Unpublished)

de Leeuw, Gert Johannes Schreuder (2007) Analysis of hydraulic transients in pipeline networks. [USQ Project] (Unpublished)

Gallagher, Tony (2007) Clear zones in urban environments. [USQ Project] (Unpublished)

Weis, Paul Raymond (2007) Cost effectiveness of street lighting. [USQ Project] (Unpublished)

Schuh, Stephen Andrew (2007) Estimating rippability of Brisbane Tuff using quantitative and qualitative characteristics and a modified approach to an existing rippability rating method. [USQ Project] (Unpublished)

Clarke, Lauren Elizabeth (2007) Factors in the selection of contractors for engineering works. [USQ Project] (Unpublished)

Martin, Christopher (2007) Ipswich City Council water supply infrastructure capacity high water usage and water meter accuracy. [USQ Project] (Unpublished)

Muller, Ben (2007) Irrigation performance and water use efficiency of turf production. [USQ Project] (Unpublished)

Ong, Chin How (2007) Life cycle assessment of cement in Malaysia. [USQ Project] (Unpublished)

Wei, Lay Kian (2007) Life cycle assessment of CSR autoclaves lightweight concrete production in Malaysia. [USQ Project] (Unpublished)

Chamberlain, Michael (2007) Optimisation of Gold Coast City’s chlorine dosing system for the southern region distribution network. [USQ Project] (Unpublished)

Saunders, Joseph Ian (2007) Porous weirs for flood mitigation. [USQ Project] (Unpublished)

Muir, Paul John (2007) Siphons as furrow irrigation measurement devices. [USQ Project] (Unpublished)

Green, Christopher Ross (2007) Testing and analysis of fibre composite beams in a bridge structure. [USQ Project] (Unpublished)

Dugdell, David Thomas (2007) Toowoomba road network review. [USQ Project] (Unpublished)

Kwok, Keen Whale (2007) Understanding progressive collapse and its effect to structural design. [USQ Project] (Unpublished)

Smith, Catherine. and Shiau, Jim S. (2007) Bearing capacity of footings near slopes. In: 10th Australia New Zealand Conference on Geomechanics, 21-24 Oct 2007, Brisbane, Australia.

Thomas, Caroline and Shiau, Jim S. (2007) Modelling the arching effect in active earth pressure problems. In: 10th Australia New Zealand Conference on Geomechanics, 21-24 Oct 2007, Brisbane, Australia.

Shinozaki, Hiroo and Aravinthan, Thiru and Pandey, Govinda Raj and Mutsuyoshi, Hiroshi (2007) Advancements in retrofitting reinforced concrete structures in Japan using FRP sheets. In: 23rd Biennial Conference of the Concrete Institute of Australia: Concrete for Future, 18-20 Oct 2007, Adelaide, Australia.

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2007) Analytical studies on externally post tensioned concrete girders with existing shear cracks. In: 23rd Biennial Conference of the Concrete Institute of Australia: Concrete for Future, 18-20 October 2007, Adelaide, Australia.

Harvey, Warren John (2007) Bridge approach guardrail prioritisation. [USQ Project] (Unpublished)

Looi Zi Qing, Sean (2007) Improving the performance of an industrial cold room. [USQ Project] (Unpublished)

Raine, S. R. and Meyer, W. S. and Rassam, D. W. and Hutson, J. L. and Cook, F. J. (2007) Soil-water and solute movement under precision irrigation: knowledge gaps for managing sustainable root zones. Irrigation Science, 26 (1). pp. 91-100. ISSN 0342-7188

Khatri, Kanya L. and Smith, R. J. (2007) Toward a simple real-time control system for efficient management of furrow irrigation. Irrigation and Drainage, 56 (4). pp. 463-475. ISSN 1531-0353

Weatherley, Mark Geoffrey (2007) The effect of compaction on the design life of rehabilitated insitu cement powder stabilised pavements. [USQ Project] (Unpublished)

Chen, Guangnan (2007) Drying operations: agricultural and forestry products. In: Capehart, Barney L., (ed.) Encyclopedia of energy engineering and technology. Taylor & Francis Books, London, United Kingdom, pp. 332-337. ISBN 978-0-8493-3653-9

Wei, Riyu and Sheng, Zhang and Karunasena, Warna and Sivakugan, Nagaratnam and Zhang, Hongwu (2007) Blast simulation in underground mines using the combined finite-discrete element method. In: 7th WSEAS International Conference on Simulation, Modelling and Optimization (SMO '07), 15-17 September 2007, Beijing, China.

Smith, R. J. and Raine, Steven R. and McCarthy, Alison and Hancock, Nigel (2007) Managing spatial and temporal variability in irrigated agriculture through adaptive control. In: SEAg 2007: Agriculture and Engineering - Challenge Today, Technology Tomorrow, 23-26 Sept 2007, Adelaide, Australia.

Misra, R. K. and Hood, Sarah (2007) Desktop review of Polyacrylamide use in the Australian cotton industry. Technical Report. University of Southern Queensland, National Centre for Engineering in Agriculture , Toowoomba, Australia.

Langat, Philip K. and Raine, Steven R. and Smith, R. J. (2007) Errors in predicting furrow irrigation performance using single measures of infiltration. Irrigation Science, 25 (4). pp. 339-349. ISSN 0342-7188

Brodie, Ian and Rosewell, Colin (2007) Theoretical relationships between rainfall intensity and kinetic energy variants associated with stormwater particle washoff. Journal of Hydrology, 340 (1-2). pp. 40-47. ISSN 0022-1694

Butcher, Peter and Thorpe, David (2007) A review of triple helix linkages in New Zealand earthquake engineering networks and comparison with the Australian cooperative research centre model. In: Triple Helix VI: 6th Biennial International Conference on University, Industry and Government Linkages, 16-18 May 2007, Singapore.

Charles, Michael and Furneaux, Craig and Pillay, Janet and Thorpe, David and Parades Castello, Cynthya and Brown, Kerry (2007) Uptake of an OHS Code of Practice by Australian construction firms. In: CIB World Building Congress 2007: Construction for Development, 14-17 May 2007, Cape Town, South Africa.

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2007) Innovative all composite multi-pultrusion truss system for stressed arch deployable shelters. In: AICSGE 6: 6th Alexandria International Conference on Structural and Geotechnical Engineering, 15-17 Apr 2007, Alexandria, Egypt.

Omar, T. and Van Erp, G. and Key, P. (2007) Modular deployable composite shelters - truss system. In: ACIC 2007: Advanced Composites in Construction Conference , 2-4 Apr 2007, Bath, UK.

Liang, Qing Quan and Uy, Brian and Liew, J. Y. Richard (2007) Local buckling of steel plates in concrete-filled thin-walled steel tubular beam-columns. Journal of Constructional Steel Research, 63 (3). pp. 396-405. ISSN 0143-974X

Thorpe, David and Ryan, Neal (2007) Responding to global issues: sustainability and innovation in the Australian SME residential building construction sector. In: ICCPM/ICCEM 2007, 1-2 March 2007, Singapore.

Liang, Qing Quan and Uy, Brian and Bradford, Mark A. and Ronagh, Hamid R. (2007) Closure to 'Strength analysis of steel-concrete composite beams in combined bending and shear' by Qing Quan Liang, Brian Uy, Mark A. Bradford and Hamid R. Ronagh. Journal of Structural Engineering, 133 (2). pp. 309-310. ISSN 0733-9445

Gillies, Malcolm H. and Smith, R. J. and Raine, Steven R. (2007) Accounting for temporal inflow variation in the inverse solution for infiltration in surface irrigation. Irrigation Science, 25 (2). pp. 87-97. ISSN 0342-7188

Cardona, F. and Rogers, D. and Davey, S. and Van Erp, G. (2007) Investigation of the effect of styrene content on the ultimate curing of vinylester resins by TGA-FTIR. Journal of Composite Materials, 41 (2). pp. 137-152. ISSN 0021-9983

Smith, Rod and Gillies, Malcolm H. and Newell, Geoffrey and Foley, Joseph P. (2007) A decision support model for travelling gun irrigation machines. In: CIGR 2006: Agricultural Engineering for a Better World, 3-7 Sep 2006, Bonn, Germany.

McCarthy, Cheryl and Hancock, Nigel and Raine, Steven R. (2007) A preliminary field evaluation of an automated vision-based plant geometry measurement system. In: 5th International Workshop on Functional Structural Plant Models (FSPM07), 4-9 Nov 2007, Napier, New Zealand.

Inman-Bamber, N. G. and Attard, S. J. and Verrall, S. A. and Webb, W. A. and Baillie, C. (2007) A web-based system for scheduling irrigation in sugarcane. In: 2007 International Society of Sugar Cane Technologists Congress, July-August 2007, Durban, South Africa .

Brodie, Ian and Young, Frank (2007) Case studies of applying urban surface data in evaluating stormwater management issues. Journal of Spatial Hydrology, 7 (2). pp. 1-16.

Brodie, Ian and Porter, Mark (2007) Comparison of methods to estimate suspended solids loads in urban stormwater. Australian Journal of Water Resources, 11 (2). pp. 221-230. ISSN 1324-1583

McClymont, David (2007) Development of a decision support system for furrow and border irrigation. [Thesis (_PhD/Research)] (Unpublished)

Nawi, Nazmi Mat and Chen, Guangnan (2007) Economics of using on-farm aeration grain storage. In: SEAg 2007: Agriculture and Engineering - Challenge Today, Technology Tomorrow, 24-26 Sept 2007, Adelaide, Australia.

Craig, Ian and Schmidt, Erik and Hancock, Nigel (2007) EvapCalc software for the determination of dam evaporation and seepage. In: SEAg 2007: Agriculture and Engineering - Challenge Today, Technology Tomorrow, 24-26 Sept 2007, Adelaide, Australia.

Chen, Guangnan and Sekhesa, Calvin C. and Penton, Geoff (2007) Facilitation of effective reduction of greenhouse gas emissions from agricultural sector. In: SEAg 2007: Agriculture and Engineering - Challenge Today, Technology Tomorrow, 24-26 Sep 2007, Adelaide, Australia.

Brodie, I. M. (2007) Prediction of stormwater particle loads from impervious urban surfaces based on a rainfall detachment index. Water Science and Technology, 55 (4). pp. 49-56. ISSN 0273-1223

Uy, Brian and Liang, Qing Quan (2007) Preface [to the 2005 Australian Structural Engineering Conference (ASEC) issue of Australian Journal of Structural Engineering]. Australian Journal of Structural Engineering, 7 (2). ISSN 1328-7982

Thorpe, David (2007) Science and its applications in The Theory of Moral Sentiments. In: Cockfield, Geoff and Firth, Ann and Laurent, John, (eds.) New perspectives on Adam Smith's The Theory of moral sentiments. Edward Elgar Publishing Limited, Cheltenham, United Kingdom, pp. 124-140. ISBN 978 1 84542 480 0

Liang, Qing Quan and Uy, Brian and Liew, J. Y. Richard (2007) Strength of concrete-filled steel box columns with buckling effects. Australian Journal of Structural Engineering, 7 (2). pp. 145-155. ISSN 1328-7982

Khatri, K. L. (2007) Toward real-time control of surface irrigation. [Thesis (_PhD/Research)] (Unpublished)

Brodie, Ian (2007) Using urban surface composition to model stormwater suspended solids: a case study of the effect of rainwater tanks. In: Mimicking Nature - Evolution or Revolution in Stormwater Management, 19-21 Sept 2007, Twin Waters, Australia.

Heron, Katherine Margaret Monica (2007) Vortex shedding on bridge piers. [USQ Project] (Unpublished)

Sohn, Jae Ho and Smith, R. J. and Yoong, Ernest (2006) Process studies of odour emissions from effluent ponds using machine-based odour measurement. Atmospheric Environment, 40 (7). pp. 1230-1241. ISSN 1352-2310

Omar, T. and Van Erp, G. and Key, P. W. (2006) Stressed arch modular deployable composite shelters: concept and development. In: CICE 2006: 3rd International Conference on FRP Composites in Civil Engineering, 13-15 Dec 2006, Miami, Fl, USA.

Sharp, Clayton Anthony (2006) Investigation of Toowoomba intersection crashes. [USQ Project] (Unpublished)

Hughes, Neil (2006) Accuracy of volumes from MX(moss) design software. [USQ Project] (Unpublished)

Hooper, James Andrew (2006) Analysis of catchment G in Oakey's sewer network. [USQ Project] (Unpublished)

Jacobs, Sunny (2006) Comparison of life cycle energy consumption of alternative irrigation systems. [USQ Project] (Unpublished)

Millikan, Toby (2006) Current and future capacity of the Wirraglen Scout Reserve Wetlands to improve urban stormwater quality at Highfields. [USQ Project] (Unpublished)

Jiankulprasert, Manop (2006) Developing physical model for bearing capacity and flow net applications. [USQ Project] (Unpublished)

Gunton, Michael J. (2006) Development of an asset management strategy for the city of Mandurah WA. [USQ Project] (Unpublished)

Govender, Gansen (2006) Driver fatigue issues on State Highway 1 south of Whangarei - within region 1 of New Zealand. [USQ Project] (Unpublished)

Bartlett, Jeremy Adam (2006) Establishment of a priority infrastructure plan for the major road network in Laidley Shire. [USQ Project] (Unpublished)

Klein, Lindsay Edward (2006) Finite element analysis of a composite bridge deck. [USQ Project] (Unpublished)

Eastaugh, Christopher S. (2006) Forest road decommissioning: modelling the effect on hydrological connectivity. [USQ Project] (Unpublished)

Tierney, Daniel Robert (2006) Freight transport following an extreme rainfall event. [USQ Project] (Unpublished)

Seiler, Emile (2006) Investigating the economic viability and methods of harvesting and storing Leucaena. [USQ Project] (Unpublished)

Walker, Craig Louis (2006) Local and post-local buckling of steel tubes in thin-walled circular concrete-filed steel tubular columns. [USQ Project] (Unpublished)

Allen, Glen Keith (2006) Problems of stone mastic asphalt use in north Queensland. [USQ Project] (Unpublished)

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru and Luther, Stephen (2006) Shear strengthening of cracked RC beam using external post-tensioning. In: 19th Australasian Conference on the Mechanics of Structures and Materials, 29 Nov - 1 Dec 2006, Christchurch, NZ.

Morris, Anthony Brian (2006) Stormwater harvest and reuse for a wholesale nursery. [USQ Project] (Unpublished)

Bolger, Paul (2006) Strengthening of headstocks with vertical clamping to enhance shear capacity. [USQ Project] (Unpublished)

Neubauer, Aaron John (2006) Testing of current flooring systems and materials. [USQ Project] (Unpublished)

Breust, Tristan David (2006) The design and structural analysis of a steel portal framed shed for the Darling Downs Historical Rail Society. [USQ Project] (Unpublished)

Chiu, Kwong Man Karen (2006) The use of recycled concrete aggregate in structural concrete around South East Queensland. [USQ Project] (Unpublished)

Hossain, T. and Mendis, P. A. and Aravinthan, Thiru and Baker, Graham (2006) Torsional resistance of high-strength concrete beams. In: 19th Australasian Conference on the Mechanics of Structures and Materials, 29 Nov - 1 Dec 2006, Christchurch, NZ.

Johnston, Kristine Leigh (2006) Treatment of mine water with colloidal suspensions. [USQ Project] (Unpublished)

Kronk, Matthew Neil (2006) Ultimate strength of steel-concrete composite beams under combined bending and torsion. [USQ Project] (Unpublished)

Figg, Matthew Lorne (2006) Using renewable plantation timber as a replacement option for unrenewable hardwood girders in bridges. [USQ Project] (Unpublished)

Downey, Kym Therese (2006) Weather induced changes on domestic water consumption. [USQ Project] (Unpublished)

Ng, S. K. and Carter, S. J. B. and Bullen, Frank (2006) A biomimicry approach to automating visual road surveys. In: 22nd ARRB Conference: Research Into Practice, 29 Oct - 02 Nov 2006, Canberra, Australia.

Lau, Chi Hing (2006) Construction technology for high rise buildings in Hong Kong. [USQ Project] (Unpublished)

Luke, Ricky (2006) Cost effectiveness of suburban street lighting. [USQ Project] (Unpublished)

Shiau, Jim S. and Perumal, Tagarajan and Benjamin, Michael and Pather, Selvan and Ayers, Ron (2006) Developing a track model for testing the road pavement under repeated moving surface loads. In: 22nd ARRB Conference: Research Into Practice, 29 Oct - 02 Nov 2006, Canberra, Australia.

Anderson, Troy and Ayers, Ron (2006) Prioritisation of guardrail remedial works. In: 22nd ARRB Conference: Research Into Practice, 29 Oct - 02 Nov 2006, Canberra, Australia.

Khatri, Kanya L. and Smith, R. J. (2006) Real-time prediction of soil infiltration characteristics for the management of furrow irrigation. Irrigation Science, 25 (1). pp. 33-43. ISSN 0342-7188

Craig, I. P. (2006) Comparison of precise water depth measurements on agricultural storages with open-water evaporation estimates. Agricultural Water Management, 85 (1-2). pp. 193-200. ISSN 0378-3774

Shiau, Jim S. and Lyamin, Andrei V. and Sloan, Scott W. (2006) Application of pseudo-static limit analysis in geotechnical earthquake design. In: Sixth European Conference on Numerical Methods in Geotechnical Engineering, 6-8 Sep 2006, Graz, Austria.

Sekhesa, Calvin Cally (2006) Development of a tool for estimating net emissions of greenhouse gases at farm and sub-catchment level. [USQ Project] (Unpublished)

Misra, R. K. and Sands, P. J. (2006) Modelling of soil fragmentation dynamics. In: ISTRO 17th Triennial Conference, 28 Aug - 3 Sept 2006, Kiel, Germany.

Shiau, Jim S. and Pather, Selvan and Ayers, Ron (2006) Developing physical models for geotechnical teaching and research. In: 6th International Conference on Physical Modelling in Geotechnics, 4-6 Aug 2006, Hong Kong.

Liang, Qing Quan (2006) Inelastic behavior of concrete-filled thin-walled steel tubular columns subjected to local buckling. In: 10th East Asia-Pacific Conference on Structural Engineering and Construction: Materials, Experimentation, Maintenance and Rehabilitation (EASEC-10) , 3-5 Aug 2006, Bangkok, Thailand.

Karunasena, Karu W. and Grice, Andrew (2006) Load-deformation behaviour prediction of timber beams externally reinforced with composite materials. In: 10th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-10), 3-5 August 2006, Bangkok, Thailand.

Liang, Qing Quan (2006) Performance-based optimization of strut-and-tie models in reinforced concrete beam-column connections. In: 10th East Asia-Pacific Conference on Structural Engineering and Construction: Materials, Experimentation, Maintenance and Rehabilitation (EASEC-10) , 3-5 Aug 2006, Bangkok, Thailand.

Liang, Qing Quan (2006) Post-local buckling of steel plates in concrete-filled thin-walled steel tubular columns under biaxial loading. In: 10th East Asia-Pacific Conference on Structural Engineering and Construction: Materials, Experimentation, Maintenance and Rehabilitation (EASEC-10), 3-5 Aug 2006, Bangkok, Thailand.

Thorpe, David (2006) Developing strategic asset management leaders through postgraduate education. In: Inaugural World Congress on Engineering Asset Management, 11-14 July 2006, Gold Coast, Australia.

Aravinthan, Thiru and Worden, John (2006) Effective use of WebCT in a problem-based learning course for a dual mode delivery. In: Engineering Education 2006 (EE2006), 24-26 Jul 2006, Liverpool, United Kingdom.

Pather, Selvan and Aravinthan, Thiru (2006) The development of a simulation engineering game to teach problem solving skills and team dynamics. In: Engineering Education 2006 (EE2006), 24-26 July 2006, Liverpool, UK.

Hardeo, Pravendra and Karunasena, W. (Karu) (2006) Three dimensional finite element analysis of concrete filled FRP tubular model piles under lateral loads. In: International Composites Conference (ACUN-5), 11-14 July 2006, Sydney, Australia.

Hancock, Nigel and McKinnon, L. and Maxwell, Andrew Douglas (2006) Universal acidity - conductivity relations in commercial bulk starter production. Australian Journal of Dairy Technology, 61 (2). pp. 189-192. ISSN 0004-9433

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2006) Effect of existing cracks in concrete bridge members strengthened by external post-tensioning. In: FIB 2006: 2nd Congress (Federation Internationale du Beton), 5-8 Jun 2006, Naples, Italy.

Craig, Ian (2006) Evaporation mitigation technology (EMT) manufacturers liaison report. Technical Report. University of Southern Queensland, National Centre for Engineering in Agriculture , Toowoomba, Australia. (Unpublished)

Aravinthan, Thiru (2006) Is external post-tensioning an effective solution for shear strengthening of bridge elements? In: Structural Faults + Repair 2006: Eleventh International Conference on ‘Extending the Life of Bridges Concrete + Composites Buildings, Masonry + Civil Structures', 13-15 June 2006, Edinburgh, UK.

Liang, Qing Quan and Uy, Brian and Liew, J. Y. Richard (2006) Nonlinear analysis of concrete-filled thin-walled steel box columns with local buckling effects. Journal of Constructional Steel Research, 62 (6). pp. 581-591. ISSN 0143-974X

Shiau, Jim and Smith, Catherine (2006) Numerical analysis of passive earth pressures with interfaces. In: III European Conference on Computational Mechanics (ECCM 2006), 5-8 June 2006, Lisbon, Portugal.

Shiau, Jim S. (2006) Numerical investigation of shakedown residual stresses under moving surface loads. In: III European Conference on Computational Mechanics (ECCM 2006), 5-8 June 2006, Lisbon, Portugal.

Merifield, R. S. and Nguyen, V. Q. (2006) Two- and three-dimensional bearing-capacity solutions for footings on two-layered clays. Geomechanics and Geoengineering: An International Journal, 1 (2). pp. 151-162. ISSN 1748-6025

Craig, Ian and Schmidt, Erik and Scobie, Michael (2006) Evaporation control using covers - some realistic solutions for the irrigation industry. In: Irrigation Australia 2006: Irrigation Association of Australia National Conference and Exhibition, 9-11 May 2006, Brisbane, Australia.

Pham, Maria M. and Mills, Julie E. and Zhuge, Yan (2006) Experimental capacity assessment of cold-formed boxed stud and C stud wall systems used in Australian residential construction. Journal of Structural Engineering, 132 (4). pp. 631-635. ISSN 0733-9445

Thorpe, David and Ryan, Neal (2006) Facilitating technology transfer in the construction industry. In: 2nd International Conference of the Cooperative Research Centre for Construction Innovation , 12-14 Mar 2006, Gold Coast, Australia.

Nelson-White, Greg (2006) Abandoned shafts study (Charters Towers): a spatial solution. [USQ Project] (Unpublished)

Fowler, Jason (2006) Cost effectiveness of suburban street lighting. [USQ Project] (Unpublished)

Tucker, Neil John (2006) Evaluation of the Queensland streets concept in residential streets in Logan City. [USQ Project] (Unpublished)

Scobie, Michael (2006) Sensitivity of capacitance probes to soil cracks. [USQ Project] (Unpublished)

Van Erp, Gerard and Cattell, Craig and Ayers, Stephen R. (2006) A fair dinkum approach to fibre composites in civil engineering. Construction and Building Materials, 20 (1-2). pp. 2-10. ISSN 0950-0618

Somasundaraswaran, Kathirgamalingam (2006) Accident statistics in Sri Lanka. IATSS Research, 30 (1). pp. 115-117. ISSN 0386-1112

Ranasinghe, R. H. C. C. and Somasundaraswaran, A. K. (2006) Addressing difficulties in rural estates with limited education facilities: a research study for uplifting social harmony. In: Third Academic Sessions, University of Ruhuna, Dec 2005, Galle, Sri Lanka.

Karunasena, W. (Karu) and Williams, K. (2006) Behaviour of FRP-to-concrete bonded joints. In: ACUN-5 International Composites Conference, 11-14 July 2006, Sydney, NSW, Australia.

Springolo, Mario and Van Erp, Gerard and Khennane, Amar (2006) Design and analysis of a composite beam for infrastructure applications - Part I: preliminary investigation in bending. International Journal of Materials and Product Technology, 25 (4). pp. 297-313. ISSN 0268-1900

Springolo, Mario and Van Erp, Gerard and Khennane, Amar (2006) Design and analysis of a composite beam for infrastructure applications - Part II: preliminary investigation in shear and torsion. International Journal of Materials and Product Technology, 25 (4). pp. 313-331. ISSN 0268-1900

Springolo, Mario and Khennane, Amar and Van Erp, Gerard (2006) Design and analysis of a composite beam for infrastructure applications - Part III: experimental results and nonlinear FE analysis. International Journal of Materials and Product Technology, 25 (4). pp. 331-347. ISSN 0268-1900

Chen, Guangnan and Schultz, Justin and Sulman, Richard (2006) Design and development of a prototype small-plot research harvesting system. In: CIGR 2006: Agricultural Engineering for a Better World, 3-7 Sep 2006, Bonn, Germany.

Karunasena, W. (2006) Elastodynamic reciprocity relations for wave scattering by flaws in fiber-reinforced composite plates. In: 10th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-10), 3-5 August 2006, Bangkok, Thailand.

Thorpe, David and Ryan, Neal (2006) Improving technology transfer in the Australian construction industry. In: Brown, Kerry and Hampson, Keith and Brandon, Peter, (eds.) Clients driving construction innovation: moving ideas into practice. Cooperative Research Centre for Construction Innovation, Brisbane, Australia, pp. 303-312. ISBN 1-7410712-803

Craig, Ian and Schmidt, Erik and Hancock, Nigel and Barnes, Geoff and Turnbull, David J. and Pittaway, Pam and Morrison, Pippa (2006) Improving the performance of chemical monolayers in reducing farm dam evaporation. In: 3rd CRC-IF Annual Research Forum, 5-6 Dec 2006, Narrabri, New South Wales. (Unpublished)

Omar, Tarek and Heldt, Tim and Key, P. and Van Erp, Gerard (2006) M2S2 modular deployable composite shelters: concept and loading criteria. Australian Journal of Structural Engineering, 6 (3). pp. 217-226. ISSN 1328-7982

Van Gool, Bronwyn and Karunasena, W. and Sivakugan, Nagaratnam (2006) Modelling the effects of blasting on paste fill. In: 1st International Conference on Computational Methods (ICCM04), 15-17 December 2004, Singapore.

Foley, Joseph P. and Wigginton, David and Eberhard, Jochen (2006) Optimizing overhead irrigation systems. In: Australian Cotton Conference: Product, Production, Profit - Progressing our National Advantage, 8-10 Aug 2006, Gold Coast, Australia.

Brodie, I. M. (2006) Prediction of stormwater particle loads from impervious urban surfaces based on a rainfall detachment index. In: 7th International Conference on Urban Drainage Modelling and 4th International Conference on Water Sensitive Urban Design, 2-7 Apr 2006, Melbourne, Australia.

Schmidt, Erik (2006) Reducing evaporation from storages. In: 2006 CRC-IF Annual Research Forum, 4-6 Dec 2006, Narrabri, Australia. (Unpublished)

Somasundaraswaran, A. K. and Tay, Richard (2006) Self-reported differences between crash-involved and non-crash-involved three-wheeler drivers in Sri Lanka. IATSS Research, 30 (1). pp. 68-72. ISSN 0386-1112

Khatri, K. L. and Smith, R. J. (2006) Simulation of performance for a simple real time control system of furrow irrigation. In: 1st International Conference on Sustainable Irrigation Management, Technologies and Policies, 5-7 Sept 2006, Bologna, Italy.

Dunn, Mark and Billingsley, John (2005) Automated macadamia nut orchard yield monitoring. In: 12th Annual Conference on Mechatronics and Machine Vision in Practice, 29 Nov - 1 Dec 2005, Manila, Phillipines.

Lokuge, Weena P. and Sanjayan, J. G. and Setunge, Sujeeva (2005) Stress-strain model for laterally confined concrete. Journal of Materials in Civil Engineering, 17 (6). pp. 607-616. ISSN 0899-1561

Craig, Ian P. (2005) Evaporation control using covers. In: 15th Queensland Water Symposium (IEAust Water Panel), 23-24 Nov 2005, Brisbane, Australia.

Schmidt, Erik (2005) Irrigation challenges in Australia and technological solutions. In: 15th Queensland Water Symposium (IEAust Water Panel), 23-24 Nov 2005, Brisbane, Australia. (Unpublished)

Lee, Chang Long (2005) A study and evaluation on Seri Wawasan bridge in Putrajaya, Malaysia. [USQ Project] (Unpublished)

Chan, Man Piu (2005) Analysis and modeling of grouting and its application in civil engineering. [USQ Project] (Unpublished)

Prasser, Mark (2005) Durability of hybrid concrete-FRP bridge decks. [USQ Project] (Unpublished)

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2005) Overview of external post-tensioning in bridges. In: 2005 Southern Region Engineering Conference: Managing Resources for a Sustainable Future (SREC 2005), 15 Oct 2005, Toowoomba, Australia.

Kannapiran, Ram Kumar M. (2005) A study and evaluation on SMART Project, Malaysia. [USQ Project] (Unpublished)

Leow, Jia Hui (2005) A study of building foundations in Malaysia. [USQ Project] (Unpublished)

Harber, Paul James (2005) Applicability of no-fines concrete as a road pavement. [USQ Project] (Unpublished)

Wilson, Maree (2005) Applications of geospatial information technology for fire risk assessment and management in NSW. [USQ Project] (Unpublished)

Babin, Robyn E. (2005) Assessment of factors influencing water reuse opportunities in Western Australia. [USQ Project] (Unpublished)

Mak, Chi Keung (2005) Benefit of partnering in the Hong Kong construction industry. [USQ Project] (Unpublished)

Gravatt, Manu Richard (2005) Burdekin Falls Dam: investigation of the structural integrity of the outlet works radial gate and fixed wheel gate under emergency closure situations. [USQ Project] (Unpublished)

Garrard, Brian John (2005) Comparison of moisture density relationship tests in civil engineering materials. [USQ Project] (Unpublished)

Kong, Mun Kai (2005) Control of early thermal cracking of raft foundation by using slagcrete portland blast-furnace cement (PBFC). [USQ Project] (Unpublished)

Schultz, Justin (2005) Design and development of a prototype, small plot research harvesting system. [USQ Project] (Unpublished)

Gounder, Sangeevam (2005) Design of steel structures under fire. [USQ Project] (Unpublished)

Al-Busaidi, Ibrahim A. (2005) Economics of photovoltaic water pumping system in Sultanate of Oman. [USQ Project] (Unpublished)

Thorpe, David and Fulcher, Robert (2005) Educating engineers for a sustainable future. In: 2005 Southern Engineering Conference: Managing Resources for a Sustainable Future, 15 Oct 2005, Toowoomba, Australia.

Luther, Steven (2005) Effect of existing cracks in shear strengthening of concrete girders with external post tensioning. [USQ Project] (Unpublished)

Whittaker, Todd (2005) Effect of existing cracks in shear strengthening of concrete girders with external post-tensioning. [USQ Project] (Unpublished)

Sivongxay, Amphone (2005) Hydraulic properties of Toowoomba soils for laundry water reuse. [USQ Project] (Unpublished)

Davis, Shawn Wayne (2005) Investigation of the flexural strengthening of concrete beams using external prestressing. [USQ Project] (Unpublished)

Le, Minh N. (2005) Investigation on reuse potential of laundry water for household garden irrigation in Toowoomba. [USQ Project] (Unpublished)

Harrison, Rodney James (2005) Modelling Tamworth regional council stormwater network. [USQ Project] (Unpublished)

Anderson, Troy Dennis (2005) Prioritisation of guard rail remediation works. [USQ Project] (Unpublished)

Crouch, Glen (2005) Rationalisation of wastewater treatment plants in Launceston. [USQ Project] (Unpublished)

Aravinthan, Vasantha (2005) Reclaimed wastewater as a resource for sustainable water management. In: 2005 Southern Region Engineering Conference: Managing Resources for a Sustainable Future (SREC 2005), 15 Oct 2005, Toowoomba, Australia.

Chan, Lai Kuan (2005) Reduction of nitrogen oxides (NOx) using liquefied petroleum gas (LPG) in spark ignition (SI) engine. [USQ Project] (Unpublished)

Lim, Chuan Jye (2005) Relationship contracting in Malaysia. [USQ Project] (Unpublished)

Welsh, Trevor James (2005) Reverse osmosis water purification unit: for government and non-government use in disaster relief. [USQ Project] (Unpublished)

Choi, Richard Fun Yiu (2005) Review of the jet grouting method. [USQ Project] (Unpublished)

Harrison, Elissa Louise (2005) Road stabilisation issues in southern district of the Department of Main Roads, Queensland. [USQ Project] (Unpublished)

Pillay, Ravindra Sen (2005) Short-term water demand forecasting for production optimisation. [USQ Project] (Unpublished)

Willmott, Peter (2005) Stabilisation of Goulburn Valley soils for the improvement of subgrades in new low traffic pavement construction. [USQ Project] (Unpublished)

Baillie, Craig Peter and Raine, Steven R. (2005) Strategies for maximizing sugarcane yield with limited water in the Bundaberg district. In: Annual Australian National Committee on Irrigation and Drainage (ANCID) Conference, 23-26 Oct 2005, Mildura, Australia.

McDonald, Scott (2005) The behaviour of hybrid fiber composite beams. [USQ Project] (Unpublished)

Law, Bee Bee (2005) The usage of domestic water filtration systems in Malaysia. [USQ Project] (Unpublished)

Earl, David (2005) To determine if there is a correlation between the shrink swell index and atterberg limits for soils within the Shepparton Formation. [USQ Project] (Unpublished)

Khatri, K. L. and Smith, R. J. (2005) Evaluation of methods for determining infiltration parameters from irrigation advance data. Irrigation and Drainage, 54 (4). pp. 467-482. ISSN 1531-0361

Sohn, J. H. and Smith, R. J. and Hudson, N. A. and Choi, H. L. (2005) Gas sampling efficiencies and aerodynamic characteristics of a laboratory wind tunnel for odour measurement. Biosystems Engineering, 92 (1). pp. 37-46. ISSN 1537-5110

Thorpe, David and Ahfock, Tony (2005) Internationalisation of Technology and Society course at University of Southern Queensland. In: 4th ASEE/AaeE Global Colloquium on Engineering Education, 26-29 Sept 2005, Sydney, Australia.

Teixeira, P. C. and Misra, R. K. (2005) Measurement and prediction of nitrogen loss by simulated erosion events on cultivated forest soils of contrasting structure. Soil and Tillage Research, 83 (2). pp. 204-217. ISSN 0167-1987

Liang, Qing Quan and Uy, Brian and Liew, J. Y. Richard (2005) Strength of concrete-filled steel box columns with local buckling effects. In: 2005 Australian Structural Engineering Conference (ASEC 2005), 11-14 September, 2005, Newcastle, Australia.

Brodie, Ian (2005) Suspended solids in stormwater runoff from various urban surfaces. Project Report. University of Southern Queensland, Faculty of Engineering and Surveying, Toowoomba, Australia.

Ayers, Ron (2005) Use of online discussion groups to increase student understanding of global social and technical issues. In: 4th ASEE/AaeE Global Colloquium on Engineering Education, 26-29 Sep 2005, Sydney, Australia.

Brodie, Ian (2005) Stormwater particles and their sampling using passive devices. In: 10th International Conference on Urban Drainage, 21-26 Aug 2005, Copenhagen, Denmark.

Aravinthan, Thiru and Heldt, Tim (2005) Strengthening of bridge headstocks with external post-tensioning: design issues and strengthening techniques. In: Road System and Engineering Technology Forum, 9-11 August 2005, Brisbane, Australia.

Raine, Steven R. and Durack, Matthew K. (2005) The future direction of on-farm irrigation technologies and practice research. In: The New Age of Cotton - Managing Change and Risk in your Environment, 17-18 Aug 2005, Narrabri, Australia.

Aravinthan, Thiru and Witchukreangkrai, Eakarat and Mutsuyoshi, Hiroshi (2005) Flexural behavior of two-span continuous prestressed concrete girders with highly eccentric external tendors. ACI Structural Journal, 102 (3). pp. 402-411. ISSN 0889-3241

Craig, Ian and Schmidt, Erik and Green, Andrew and Scobie, Michael (2005) Controlling evaporation from on-farm storages. In: Irrigation Australia 2005: Irrigation Association of Australia National Conference and Exhibition: Restoring the Balance, 17-19 May 2005, Townsville, Australia.

Raine, Steven R. and Purcell, Jim and Schmidt, Erik (2005) Improving whole farm and infield irrigation efficiencies using Irrimate tools. In: Irrigation Australia 2005: Irrigation Association of Australia National Conference and Exhibition: Restoring the Balance, 17-19 May 2005, Townsville, Australia.

Wigginton, David and Foley, Joseph P. (2005) Planning for successful centre pivot and lateral move purchase. In: Irrigation Australia 2005: Irrigation Association of Australia National Conference and Exhibition: Restoring the Balance, 17-19 May 2005, Townsville, Australia.

Khennane, Amar and Melchers, Robert E. (2005) A meso-scale finite element model for environmental stress corrosion of GFRP. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005): Advances in Applied Mechanics, 16-18 Feb 2005, Melbourne, Australia.

Smith, R. J. and Raine, Steven R. and Minkevich, John (2005) Irrigation application efficiency and deep drainage potential under surface irrigated cotton. Agricultural Water Management, 71 (2). pp. 117-130. ISSN 0378-3774

Moody, Bradley John (2005) Control and instrumentation for the USQ Formula SAE-A race car. [USQ Project] (Unpublished)

Gordon, Craig (2005) Determination of insitu flexible moduli of modified pavement materials. [USQ Project] (Unpublished)

Wiltshire, Mark (2005) Greywater reuse in urban areas. [USQ Project] (Unpublished)

Teoh, Eang Aun (2005) Numerical modelling of complex slope using FLAC/SLOPE. [USQ Project] (Unpublished)

Leong, Weng Wah (2005) The impact of trenching on urban road operation and maintenance. [USQ Project] (Unpublished)

Craig, Ian and Green, Andrew and Scobie, Michael and Schmidt, Erik (2005) Controlling evaporation loss from water storages. Technical Report. University of Southern Queensland, National Centre for Engineering in Agriculture , Toowoomba, Australia.

Aravinthan, T. and Heldt, T. (2005) Innovative strengthening technique using prestressed fibre wraps for bridge headstocks. In: ASEC 2005: 6th Australian Structural Engineering Conference Structural engineering : preserving and building into the future , 11-14 Sep 2005, Newcastle, Australia.

Chen, Guangnan and Orphant, Simon and Kenman, Sarah J. and Chataway, Robert G. (2005) Life cycle assessment of a representative dairy farm with limited irrigation pastures. In: 4th Australian Conference on Life Cycle Assessment, 23-25 Feb 2005, Sydney, Australia.

Craig, Ian P. (2005) Loss of storage water due to evaporation - a literature review. Technical Report. University of Southern Queensland, National Centre for Engineering in Agriculture , Toowoomba, Australia.

Lee, Richard Anthony (2005) Micrographs of the fracture of vinyl ester composites cured by microwaves. [USQ Project] (Unpublished)

Chen, G. and Baker, Graham (2005) One-dimensional nonlinear model for prediction of crack spacing in concrete pavements. Advances in Structural Engineering, 8 (6). pp. 595-602. ISSN 1369-4332

Khennane, Amar (2005) Performance design of reinforced concrete slabs using commercial finite element software. Structural Concrete, 6 (4). pp. 141-147. ISSN 1464-4177

Liang, Qing Quan (2005) Performance-based optimization of structures: theory and applications. Spon Research . Taylor & Francis (Spon Press), London and New York. ISBN 0-415-33594-9

Misra, R. K. and Fuentes, S. and Raine, Steven R. (2005) Recent developments and strategies in the use of plant indicators for irrigation scheduling. In: Irrigation Australia 2005: Irrigation Association of Australia National Conference and Exhibition: Restoring the Balance, 17-19 May 2005, Townsville, Australia.

De Costa, Gregory Shahane and Kojiri, Toshiharu and Porter, Mark (2005) Salinity intrusion: its characteristics and impact - cases in the Asia Pacific region. In: 4th International Symposium on Environmental Hydraulics, 15-18 Dec 2004, Hong Kong.

Golshani, Aliakbar and Okui, Yoshiaki and Oda, Masanobu and Suzuki, Kenichiro (2005) Simulation of damage around a circular opening in rock. In: 11th International Conference of IACMAG, 19-24 June, 2005, Turin, Italy.

Liang, Qing Quan and Uy, Brian and Bradford, Mark A. and Ronagh, Hamid R. (2005) Strength analysis of steel-concrete composite beams in combined bending and shear. Journal of Structural Engineering, 131 (10). pp. 1593-1600. ISSN 0733-9445

Karunasena, W. and Anderson, W. C. (2005) Strength and ductility prediction of concrete beams reinforced with internal steel and external composite materials. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005), 16-18 February 2005, Melbourne, Australia.

Elvy, Michelle Catherine (2004) Development of infiltration factors for the estimation of urban separate wastewater flow in the Gippsland water catchment. [USQ Project] (Unpublished)

Chen, G. and Baker, Graham (2004) Energy profile and bifurcation analysis in softening plasticity. Advances in Structural Engineering, 7 (6). pp. 515-523. ISSN 1369-4332

Ngo, Nelson, Shing Chai (2004) High-strength structural concrete with recycled aggregates. [USQ Project] (Unpublished)

Young, Paul Edward (2004) Project management : a guide from start to finish for BHPBilliton Iron Ore Engineering Services Dept. Port Hedland. [USQ Project] (Unpublished)

Cheong, Siew Hong (2004) Role of a project manager in a residential development housing development in Singapore - Analyse the use of bar code in tracking drawing during the construction of a residential development in Singapore. [USQ Project] (Unpublished)

Wong, Chuan Mein (2004) Use of short fibres in structural concrete to enhance mechanical properties. [USQ Project] (Unpublished)

Lau, Chau Chin (2004) A study on concrete faced rockfill dams. [USQ Project] (Unpublished)

Coppen, John (2004) Advanced wastewater treatment systems. [USQ Project] (Unpublished)

Darr, Shawn Geoffrey (2004) Assessment of crop health in relation to competition from weeds: using balloon-borne images and pectrometer data. [USQ Project] (Unpublished)

Cheong, Fong Chin (2004) Effect of admixtures on the use of short fibres in structural concrete to enhance mechanical properties. [USQ Project] (Unpublished)

Alam, Murshedul (2004) Effect of epoxy repairing on girders shear strengthened with external post tensioning. [USQ Project] (Unpublished)

McKeering, Loretta M. (2004) Evaluating the potential to impose partial root zone drying (PRD) on clay soils in commercial cotton production systems. [USQ Project] (Unpublished)

Mackenzie, Christopher Frank (2004) Evaluation of funding justification of low volume roads in North Queensland. [USQ Project] (Unpublished)

Smith, Richard Boyd (2004) Forensic investigation of pavement failures. [USQ Project] (Unpublished)

Jensen, Jason W. (2004) Influence of physical road characteristics on road crashes. [USQ Project] (Unpublished)

Li, David (2004) Investigation of driver fatigue problems on the Oakey-Cooyar road. [USQ Project] (Unpublished)

Orphant, Simon (2004) Life cycle assessment of the production of raw milk. [USQ Project] (Unpublished)

Underhill, Richard (2004) Life cycle maintenance of low volume roads in the Alice Springs region. [USQ Project] (Unpublished)

Tan, Kok Wei (2004) Motorcycle safety in Malaysia. [USQ Project] (Unpublished)

Robertson, Jamie Andrew (2004) Optimising the operations of the Kanaka Drain floodgate. [USQ Project] (Unpublished)

Heinrich, Nathan (2004) Prediction of feedlot effluent pond odour emission after significant inflow. [USQ Project] (Unpublished)

Ruhle, Andrew John Alexander (2004) Redesign and analysis of Janke Bros. F500P parallelogram planting unit. [USQ Project] (Unpublished)

Yap, Fui It (2004) Review of the current timber industry in Malaysia. [USQ Project] (Unpublished)

Choo, Yeun Feong (2004) Seismic stability of slope. [USQ Project] (Unpublished)

Woods, Evan Arthur (2004) Shear strengthening and model testing of concrete bridge headstocks. [USQ Project] (Unpublished)

Jobling, Lindsay Peter (2004) Shear strengthening of headstocks using prestressed fibre strips. [USQ Project] (Unpublished)

Ng, Chan Man (2004) Site formation works for Shek Mun development. [USQ Project] (Unpublished)

Lusk, Benjamin Geoffrey (2004) Soil amendments to improve playability and reduce injury risks on sporting fields. [USQ Project] (Unpublished)

Krinke, Mark James (2004) The effect of admixtures in concrete containing manufactured sand. [USQ Project] (Unpublished)

Fraser, Timothy (2004) The use of industry by-products in the treatment of acid sulfate soils. [USQ Project] (Unpublished)

Piper, A. G. (2004) Turf monitoring technology to aid in benchmarking and maintenance of sporting fields. [USQ Project] (Unpublished)

Gitau, Samuel Kimani (2004) Use of road asset maintenance planning software in QDMR. [USQ Project] (Unpublished)

Sohn, Jae Ho and Smith, Rod and Yoong, Ernest and Hudson, Neale A. and Kim, Tae I. (2004) An evaluation of a novel wind tunnel design applied to the measurement of the kinetics of odour emissions from piggery effluent. Water Science and Technology, 50 (4). pp. 49-55. ISSN 0273-1223

Thorpe, David (2004) Development and implementation of a postgraduate technology management program. In: AaeE 2004: Creating Flexible Learning Environments, 27-29 Sep 2004, Toowoomba, Australia.

Brodie, Ian and Porter, Mark (2004) Use of passive stormwater samplers in water sensitive urban design. In: WSUD 2004 International Conference on Water Sensitive Urban Design: Cities As Catchments, 21-25 Nov 2004, Adelaide, South Australia.

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2004) Constitutive model for confined high strength concretes subjected to cyclic loading. Journal of materials in Civil Engineering, 16 (4). pp. 297-305. ISSN 0899-1561

Dowling, David (2004) Studying engineering by distance education: an Australian case study. In: Engineering Education 2004 (EE2004), 07-09 Jun 2004, Wolverhampton, United Kingdom. (Submitted)

Emdad, Mohammad R. and Raine, Steven R. and Smith, Rod J. and Fardad, Hossein (2004) Effect of water quality on soil structure and infiltration under furrow irrigation. Irrigation Science, 23 (2). pp. 55-60. ISSN 0342-7188

Craig, Ian and Hancock, Nigel (2004) Methods for assessing dam evaporation - an introductory paper. In: Irrigation Australia 2004: Irrigation Association of Australia National Conference and Exhibition, 11-13 May 2004, Adelaide, Australia.

Chen, G. and Baker, Graham (2004) Analysis of crack spacing in reinforced concrete by a lattice model. Advances in Structural Engineering, 7 (2). pp. 179-188. ISSN 1369-4332

Chen, G. and Baker, Graham (2004) Incompatible 3-node interpolation for gradient-dependent plasticity. Structural Engineering and Mechanics , 17 (1). pp. 87-97. ISSN 1225-4568

Aravinthan, Thiru and Sabonchy, Erdal and Heldt, Tim (2004) Application of external post-tensioning for strengthening of headstocks (bent-caps) in bridges. In: CONSEC'04: Environment and Loading , 27-30 Jun 2004, Seoul, South Korea.

Foley, Joseph P. (2004) Centre pivot and lateral move machines. In: Dugdale, Helen and Harris, Graham and Neilsen, James and Richards, Dirk and Roth, Guy and Williams, David, (eds.) WATERpak - A guide for irrigation management in cotton. Cotton Research and Development Corporation, Narrabri, NSW, Australia, pp. 195-220. ISBN 1876354968

Bel, Patricia Damian (2004) Cotton quality - fibre to fabric: fibre properties relationships to fabric quality. [Thesis (_PhD/Research)] (Unpublished)

Hughes, Warren and Karunasena, Warna (2004) Factors affecting debonding of FRP (fiber-reinforced polymer) rehabilitated concrete beams. In: 3rd International Conference on Advances in Structural Engineering and Mechanics (ASEM 2004), 2-4 Sept 2004, Seoul, South Korea.

Liang, Qing Quan and Uy, Brian and Wright, Howard D. and Bradford, Mark A. (2004) Local buckling of steel plates in double skin composite panels under biaxial compression and shear. Journal of Structural Engineering, 130 (3). pp. 443-451. ISSN 0733-9445

Sparshott, K. and Miyamoto, M. and Bhaskaran, Sunil (2004) Mapping vegetation response to fire by hyperspectral techniques at the Girraween National Park, Stanthorpe, Queensland. In: 12th Australasian Remote Sensing and Photogrammetry Conference (ARSPC 2004): To Measure is to Manage, 18-22 Oct 2004, Fremantle, Australia.

Karunasena, W. (2004) Numerical modelling of obliquely incident guided wave scattering by a crack in a laminated composite plate. In: 2004 Structural Integrity and Fracture International Conference (SIF2004), 26-29 Sept 2004, Brisbane, Australia.

Craig, Ian and Sohn, Jae Ho and Kim, Tae I. (2004) Recommended methods for the preconditioning of odourous air prior to treatment in organic biofilters. Technical Report. University of Southern Queensland, National Centre for Engineering in Agriculture , Toowoomba, Australia. (Unpublished)

Baillie, Craig Peter (2004) Strategies for maximising sugarcane yield with limited water in the Bundaberg district. [Thesis (_PhD/Research)] (Unpublished)

Donald, Alexis (2004) The application of the real-time multivariate Madden-Julian Oscillation Index to intraseasonal rainfall forecasting in the mid-latitudes. [Thesis (_PhD/Research)] (Unpublished)

Galvin, Geordie and Lowe, Scott and Smith, Rod (2004) The validation of a simple Gaussian dispersion model for determining odour emission rates from area sources. Developments in Chemical Engineering and Mineral Processing, 12 (5/6). pp. 545-558. ISSN 0969-1855

Liang, Qing Quan and Uy, Brian and Bradford, Mark A. and Ronagh, Hamid R. (2004) Ultimate strength of continuous composite beams in combined bending and shear. Journal of Constructional Steel Research, 60 (8). pp. 1109-1128. ISSN 0143-974X

Johnson, K. and Lemcke, Pamela M. and Karunasena, W. and Sivakugan, Nagaratnam (2003) Modelling the response to deep foundations under oblique loading. In: MODSIM03: International Congress on Modelling and Simulation: Integrative Modelling of Biophysical, Social, and Economic Systems for Resource Management Solutions, 14-17 July 2003, Townsville, Australia.

Sohn, Jae Ho and Smith, Rod and Yoong, Ernest and Leis, John W. and Galvin, Geordie (2003) Quantification of odours from piggery effluent ponds using an electronic nose and an artificial neural network. Biosystems Engineering, 86 (4). pp. 399-410. ISSN 1537-5110

Chen, G. and Baker, Graham (2003) Influence of bond slip on crack spacing in numerical modeling of reinforced concrete. Journal of Structural Engineering, 129 (11). pp. 1514-1521. ISSN 0733-9445

Chen, G. and Baker, Graham (2003) Characteristics of solutions in softening plasticity and path criterion. Structural Engineering and Mechanics, 16 (2). pp. 141-152. ISSN 1225-4568

Lokuge, Weena and Setunge, Sujeeva and Sanjayan, J. G. (2003) Modelling eccentrically loaded high-strength concrete columns. Magazine of Concrete Research, 55 (4). pp. 331-341. ISSN 0024-9831

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2003) Triaxial test results of high-strength concrete subjected to cyclic loading. Magazine of Concrete Research, 55 (4). pp. 321-329. ISSN 0024-9831

Liang, Qing Quan and Uy, Brian and Wright, Howard D. and Bradford, Mark A. (2003) Local and post-local buckling of steel-concrete composite panels under combined states of stresses. In: Proceedings of the International Conference on Advances in Structures (ASSCCA'03), 22-25 June 2003, Sydney, Australia.

Takemura, Takato and Golshani, Aliakbar and Oda, Masanobu and Suzuki, Kenichiro (2003) Preferred orientations of open microcracks in granite and their relation with anisotropic elasticity. International Journal of Rock Mechanics and Mining Sciences, 40 (4). pp. 443-454. ISSN 1365-1609

Chen, Guangnan and Baker, Graham (2003) An energy model for bifurcation analysis of a double-notched concrete panel: continuum model. Advances in Structural Engineering, 6 (1). pp. 45-51. ISSN 1369-4332

Lam, Y. C. and Santhikumar, S. (2003) Automated rib location and optimization for plate structures. Structural and Multidiscipline Optimization, 25 (1). pp. 35-45. ISSN 1615-1488

Liang, Qing Quan and Uy, Brian and Wright, Howard D. and Bradford, Mark A. (2003) Local and post-local buckling of double skin composite panels. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 156 (2). pp. 111-119. ISSN 0965-0911

Chen, G. and Baker, Graham (2003) Material softening and structural instability. Advances in Structural Engineering, 6 (4). pp. 353-357. ISSN 1369-4332

Ryley, M. J. and Jensen, Troy and Kyei, A. N. (2003) Mechanical harvesting reduces sphacelia/sclerote levels of claviceps africana. International Sorghum and Millets Newsletter (44). pp. 100-102. ISSN 1023-487X

Thorpe, David (2003) Online remote construction management trials in Queensland Department of Main Roads: a participant's perspective. Construction Innovation: Information, Process, Management, 3 (2). pp. 65-79. ISSN 1471-4175

Misra, R. K. (2003) Root growth pressure at the soil–root interface. In: Lal, Rattan, (ed.) Encyclopedia of soil science, 2nd ed. Marcel Dekker, Inc., New York, NY, USA, pp. 1-3. ISBN 978-0-8493-3830-4 (hbk) ; 978-0-8493-5051-1 (electronic)

Vacher, Cameron A. and Loch, Rob and Raine, Steven R. (2003) The effect of polyacrylamide additions on the infiltration and erosion of disturbed lands. Soil Research, 41 (8). pp. 1509-1520. ISSN 0004-9573

Liang, Qing Quan and Uy, Brian and Wright, Howard D. and Bradford, Mark A. (2002) Local buckling of biaxially compressed steel plates in double skin composite panels. In: Proceedings of the Third International Conference on Advances in Steel Structures, 9-11 Dec 2002, Hong Kong, China.

Liang, Qing Quan and Steven, Grant P. (2002) A performance-based optimization method for topology design of continuum structures with mean compliance constraints. Computer Methods in Applied Mechanics and Engineering, 191 (13-14). pp. 1471-1489. ISSN 0045-7825

Liang, Qing Quan and Uy, Brian and Steven, Grant P. (2002) Performance-based optimization for strut-tie modeling of structural concrete. Journal of Structural Engineering, 128 (6). pp. 815-823. ISSN 0733-9445

Basnet, Badri Bahadur and Apan, Armando and Raine, Steven R. (2001) Selecting sites suitable for animal waste application using a raster GIS. Environmental Management, 28 (4). pp. 519-531. ISSN 0364-152X

Liang, Qing Quan and Xie, Yi Min and Steven, Grant P. (2001) Generating optimal strut-and-tie models in prestressed concrete beams by performance-based optimization. ACI Structural Journal, 98 (2). pp. 226-232. ISSN 0889-3241

Liang, Qing Quan and Xie, Yi Min and Steven, Grant P. (2001) A performance index for topology and shape optimization of plate bending problems with displacement constraints. Structural and Multidisciplinary Optimization, 21 (5). pp. 393-399. ISSN 1615-147X

Liang, Qing Quan and Xie, Yi Min and Steven, Grant P. (2000) Optimal topology selection of continuum structures with displacement constraints. Computers and Structures, 77 (6). pp. 635-644. ISSN 0045-7949

Liang, Qing Quan and Xie, Yi Min and Steven, Grant P. (2000) Topology optimization of strut-and-tie models in reinforced concrete structures using an evolutionary procedure. ACI Structural Journal, 97 (2). pp. 322-330. ISSN 0889-3241

Liang, Qing Quan and Xie, Yi Min and Steven, Grant P. (2000) Optimal topology design of bracing systems for multi-story steel frames. Journal of Structural Engineering, 126 (7). pp. 823-829. ISSN 0733-9445

Liang, Qing Quan and Uy, Brian (2000) Theoretical study on the post-local buckling of steel plates in concrete-filled box columns. Computers and Structures, 75 (5). pp. 479-490. ISSN 0045-7949

Liang, Qing Quan and Xie, Yi Min and Steven, Grant P. (1999) Optimal selection of topologies for the minimum-weight design of continuum structures with stress constraints. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 213 (8). pp. 755-762. ISSN 0954-4062

Liang, Qing Quan and Xie, Yi Min and Steven, Grant P. (1999) Optimal topology selection of continuum structures with stress and displacement constraints. In: 7th East Asia-Pacific Conference on Structural Engineering & Construction, 27-29 August, 1999, Kochi, Japan.

Liang, Qing Quan and Xie, Yi Min and Steven, Grant P. and Schmidt, L. C. (1999) Topology optimization of strut-and-tie models in non-flexural reinforced concrete members. In: International Conference on Mechanics of Structures, Materials and Systems, 17-19 February, 1999, Wollongong, Australia.

Liang, Qing Quan and Uy, Brian (1998) Geometric and material nonlinear behaviour of steel plates in thin-walled concrete filled box columns. In: 2nd International Conference on Thin-Walled Structures, 2-4 December, 1998, Singapore.

Liang, Qing Quan and Uy, Brian (1998) Parametric study on the structural behaviour of steel plates in concrete-filled fabricated thin-walled box columns. Advances in Structural Engineering, 2 (1). pp. 57-71. ISSN 1369-4332

Loch, D. S. and Johnston, P. W. and Jensen, troy and Harvey, G. L. (1996) Harvesting, processing and marketing Australian native grass seeds. New Zealand Journal of Agricultural Research, 39 . pp. 591-599.

Radajewski, W. and Jensen, Troy and Abawi, Yahya and McGahan, Eugene (1992) Drying rate and damage to navy beans. Transactions of the American Society of Agricultural Engineers , 35 (2). pp. 583-590. ISSN 0001-2351

Liang, Qing Quan (2007) Performance-based optimization: a review. Advances in Structural Engineering, 10 (6). pp. 739-753. ISSN 1369-4332

Banhazi, T. M. and Rutley, D. L. and Pitchford, W.S. (2010) Validation and fine-tuning of a predictive model for air quality in livestock buildings. Biosystems Engineering, 105 (3). pp. 395-401. ISSN 1537-5110

Lian, C. and Zhuge, Y. (2010) Optimum mix design of enhanced permeable concrete: an experimental investigation. Construction and Building Materials, 24 (12). pp. 2664-2671. ISSN 0950-0618