Browse by Socio-Economic Objective (ANZSRC 2008)

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Number of items at this level: 835.

Craig, Ian P. and Hewitt, Andrew and Terry, Howard (2014) Rotary atomiser design requirements for optimum pesticide application efficiency. Crop Protection, 66. pp. 34-39. ISSN 0261-2194

Ariafar, Kavous and Buttsworth, David and Sharifi, Navid and Malpress, Ray (2014) Ejector primary nozzle steam condensation: area ratio effects and mixing layer development. Applied Thermal Engineering, 71 (1). pp. 519-527. ISSN 1359-4311

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2014) An overview of mechanical properties and durability of glass-fibre reinforced recycled mixed plastic waste composites. Materials and Design, 62. pp. 98-112. ISSN 0264-1275

Liu, Y. and Zhang, J. and Deo, R. and Mi, J. and Nathan, G. J. and Zhu, R. (2014) Influence of sidewalls on the centerline small-scale turbulence of a turbulent high-aspect-ratio rectangular jet. Experimental Thermal and Fluid Science, 58. pp. 139-144. ISSN 0894-1777

Ferdous, Wahid and Manalo, Allan (2014) Failures of mainline railway sleepers and suggested remedies – review of current practice. Engineering Failure Analysis, 44. pp. 17-35. ISSN 1350-6307

Lebbe, Mohamed Farook Kalendher and Lokuge, Weena and Setunge, Sujeeva and Zhang, Kevin (2014) Failure mechanisms of bridge infrastructure in an extreme flood event. In: 1st International Conference on Infrastructure Failures and Consequences (ICFC 2014), 16-20 Jul 2014, Melbourne, Australia.

Lokuge, Weena and Setunge, Sujeeva and Karunasena, Warna (2014) Investigating the performance of floodway in an extreme flood event. In: 1st International Conference on Infrastructure Failures and Consequences (ICFC 2014), 16-20 Jul 2014, Melbourne, Australia .

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru and Remennikov, Alex (2014) Review of failures of railway sleepers and its consequences. In: 1st International Conference on Infrastructure Failures and Consequences (ICFC 2014), 16-20 Jul 2014, Melbourne, Australia.

Tien, C. M. T. and Thai-Quang, N. and Mai-Duy, N. and Tran, C. -D. and Tran-Cong, T. (2014) A fully coupled scheme for viscous flows in regular and irregular domains using compact integrated RBF approximation. In: 1st Australasian Conference on Computational Mechanics (ACCM 2013), 3-4 Oct 2013, Sydney, Australia.

Nguyen, H. Q. and Tran, C. D. and Pham-Sy, N. and Tran-Cong, T. (2014) A numerical solution based on the Fokker-Planck equation for dilute polymer solutions using high order RBF methods. In: 1st Australasian Conference on Computational Mechanics (ACCM 2013), 3-4 Oct 2013, Sydney, Australia.

Ferdous, Wahid and Manalo, Allan and Aravinthan, Thiru and Van Erp, Gerard (2014) Composite railway sleeper: a cost effective and eco-friendly alternative. In: IEEE Australia and New Zealand Student and Young Professional Congress (ANZSCON 2014), 3-5 Jul 2014, Brisbane, Australia.

Rashmi, W. and Ismail, A. F. and Khalid, M. and Anuar, A. and Yusaf, T. (2014) Investigating corrosion effects and heat transfer enhancement in smaller size radiators using CNT-nanofluids. Journal of Materials Science, 49 (13). pp. 4544-4551. ISSN 0022-2461

Shahid, Syed Salman and Bikson, Marom and Salman, Humaira and Wen, Peng and Ahfock, Tony (2014) The value and cost of complexity in predictive modelling: role of tissue anisotropic conductivity and fibre tracts in neuromodulation. Journal of Neural Engineering, 11 (3). pp. 1-19. ISSN 1741-2560

Banerjee, Sourish (2014) On the mechanical properties of hierarchical lattices. Mechanics of Materials, 72. pp. 19-32. ISSN 0167-6636

Al-lwayzy, Saddam H. and Yusaf, Talal and Al-Juboori, Raed A. (2014) Biofuels from the fresh water microalgae Chlorella vulgaris (FWM-CV) for diesel engines. Energies, 7 (3). pp. 1829-1851.

Reed, Mark and Lokuge, Weena and Karunasena, Warna (2014) Fibre reinforced geopolymer concrete with ambient curing for in-situ applications. Journal of Materials Science, 49 (12). pp. 4297-4304. ISSN 0022-2461

Braithwaite, Stephen and Addie, Ronald Geoffrey (2014) Optimal choice of test signals for linear channel estimation using second order statistics. Optimization and Engineering, 15 (1). pp. 93-118. ISSN 1389-4420

Etaati, Amir and Mehdizadeh, Saman Abdanan and Wang, Hao and Pather, Selvan (2014) Vibration damping characteristics of short hemp fibre thermoplastic composites. Journal of Reinforced Plastics and Composites, 33 (4). pp. 330-341. ISSN 0731-6844

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2014) A study into the characteristics of gomuti (Arenga pinnata) fibre for usage as natural fibre composites. Journal of Reinforced Plastics and Composites, 33 (2). pp. 179-192. ISSN 0731-6844

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2014) MILD combustion: the future for lean and clean combustion technology. International Review of Mechanical Engineering , 8 (1). pp. 251-257. ISSN 1970-8734

Chen, Ling and Tang, Chak Yin and Ku, Harry Siu-Lung and Tsui, Chi Pong and Chen, Xu (2014) Microwave sintering and characterization of polypropylene/multi-walled carbon nanotube/hydroxyapatite composites. Composites Part B: Engineering , 56. pp. 504-511. ISSN 1359-8368

Zhao, Long and Xiang, Wei and Mei, Jie and Zhao, Hui and Long, Hang and Li, Lin (2014) Energy-efficient dual-iteration power allocation for two-phase relay system with massive antennas. International Journal of Antennas and Propagation, 2014. pp. 1-8. ISSN 1687-5869

Alsaeed, T. and Yousif, B. F. (2014) Machinability of glass/date palm fibre epoxy composites. International Journal of Machining and Machinability of Materials, 16 (2). pp. 129-150. ISSN 1748-5711

Deo, Ravinesh C. (2013) Comparative analysis of turbulent plane jets from a sharp-edged orifice, a beveled-edge orifice and a radially contoured nozzle. International Journal of Mechanical, Industrial Science and Engineering, 7 (12). pp. 1471-1480.

Deo, Ravinesh C. (2013) The role of nozzle-exit conditions on the flow field of a plane jet. International Journal of Mechanical, Industrial Science and Engineering, 7 (12). pp. 1059-1069.

Hairuddin, Abdul Aziz and Yusaf, Talal and Wandel, Andrew (2013) Effect of different heat transfer models on a diesel homogeneous charge compression ignition engine. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1292-1304. ISSN 2229-8649

Albdiry, M. T. and Ku, H. and Yousif, B. F. (2013) Impact fracture behaviour of silane-treated halloysite nanotubes-reinforced unsaturated polyester. Engineering Failure Analysis, 35. pp. 718-725. ISSN 1350-6307

Karunasena, W. and Jayatilake, I. and Lokuge, W. (2013) Free vibration behaviour of fibre composite sandwich beams with debonds. In: 4th International Conference on Structural Engineering and Construction Management 2013 (ICSECM 2013), 13-15 Dec 2013, Kandy, Sri Lanka.

Sirimanna, C. S. and Karunasena, W. and Manalo, A. C. and Banerjee, S. and McGarva, L. (2013) Analysis of internal bonded fibre reinforced composite repair systems for corroded steel pipelines. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 Dec 2013, Melbourne, Australia .

Manalo, A. C. and Karunasena, W. and Sirimanna, C. and Maranan, G. (2013) Fibre composites pile rehabilitation and concrete formwork jacket - Concept development and finite element analysis. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 December 2013, Melbourne, Australia.

Maranan, G. B. and Manalo, A. C. (2013) Investigation on the mechanical behavior of hybrid fibre reinforced polymer composite beam. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 December 2013, Melbourne, Australia.

Manalo, A. C. (2013) The effect of shear span-to-depth ratio and test set-up on the behavior of fibre composite sandwich structure. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 Dec 2013, Melbourne, Australia .

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2013) Analysis of a railway turnout system with a spot replacement sleeper. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Maxwell, Andrew D. and Orwin, Lindy and Kist, Alexander A. and Maiti, Ananda and Midgley, Warren and Ting, Wu (2013) An inverted remote laboratory - makers and gamers. In: AaeE 2013: Work Integrated Learning – Applying Theory to Practice in Engineering Education, 8-11 Dec 2013, Gold Coast, Queensland.

Gibbings, Peter and Snook, Chris (2013) Benchmarking of final year engineering projects. In: AaeE 2013: Work Integrated Learning – Applying Theory to Practice in Engineering Education, 8-11 Dec 2013, Gold Coast, Australia.

Gibbings, Peter and Bowtell, Les (2013) Student focus groups. In: AaeE 2013: Work Integrated Learning – Applying Theory to Practice in Engineering Education, 8-11 Dec 2013, Gold Coast, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. (2013) Design and development of mild combustion burner. Journal of Mechanical Engineering and Sciences, 5. pp. 662-676. ISSN 2289-4659

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2013) Dynamic behaviour of debonded GFRP composite beams. Journal of Multifunctional Composites, 1 (2). pp. 113-122. ISSN 2168-4246

Manalo, Allan (2013) Fibre reinforced polymer composites sandwich structure: Recent developments and applications in civil infrastructure. In: 2013 International Research Conference on Innovations in Engineering, Science and Technology (IRCIEST 2013), 27-29 Nov 2013, Batangas State University, Batangas, Philippines.

Liu, Chia-Chuan and Kar, Sandeep and Jean, Jiin-Shuh and Wang, Chung-Ho and Lee, Yao-Chang and Sracek, Ondra and Li, Zhaohui and Bundschuh, Jochen and Yang, Huai-Jen and Chen, Chien-Yen (2013) Linking geochemical processes in mud volcanoes with arsenic mobilization driven by organic matter. Journal of Hazardous Materials , 262. pp. 980-988. ISSN 0304-3894

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2013) Numerical study of oxygen dilution and temperature distribution of biogas combustion in Bluff-body MILD burner. In: 7th Australian Combustion Symposium (ACS 2013), 6-8 Nov 2013, Perth, Australia .

Ahmed, Diyar I. and Kasolang, S. and Khidhir, Basim A. and Yousif, B. F. (2013) Fuzzy logic based model to predict maximum oil-film pressure in journal bearing. Research Journal of Applied Sciences, Engineering and Technology , 6 (20). pp. 3871-3878. ISSN 2040-7459

du Preez, M. and Wandel, Andrew P. (2013) Direct numerical simulations of passive scalars: effect of initial mixture fraction distribution on timescales. In: 7th Australian Combustion Symposium (ACS 2013), 6-8 Nov 2013, Perth, Australia.

Liu, Hui-min and Li, Zhi-peng and Wang, Hao (2013) Effect of in-situ TiC particles on hot deformation behavior of spray formed 7075 Al alloy. Transactions of Materials and Heat Treatment (Cailiao Rechuli Xuebao), 34 (S2). pp. 173-178. ISSN 1009-6264

Chen, Jiongze and Addie, Ronald G. and Zukerman, Moshe (2013) Performance evaluation and service rate provisioning for a queue with fractional Brownian input. Performance Evaluation, 70 (11). pp. 1028-1045. ISSN 0166-5316

Yusaf, Talal (2013) Experimental study of microorganism disruption using shear stress. Biochemical Engineering Journal, 79. pp. 7-14. ISSN 1369-703X

Gharehghani, A. and Koochak, M. and Mirsalim, M. and Yusaf, Talal (2013) Experimental investigation of thermal balance of a turbocharged SI engine operating on natural gas. Applied Thermal Engineering, 60 (1/2). pp. 200-207. ISSN 1359-4311

Shahid, Salman and Wen, Peng and Ahfock, Tony (2013) Assessment of electric field distribution in anisotropic cortical and subcortical regions under the influence of tDCS. Bioelectromagnetics . pp. 1-17. ISSN 0197-8462 (In Press)

Dobson, David (2013) Electro muscle stimulus system for wasted muscle rehabilitation. [USQ Project] (Unpublished)

Yan, Z. L. and Zhang, J. C. and Lin, G. and Zhang, H. and Ding, Y. and Wang, H. (2013) Fabrication process optimization of hemp fibre-reinforced polypropylene composites. Journal of Reinforced Plastics and Composites, 32 (20). pp. 1504-1512. ISSN 0731-6844

Janse van Rensburg, Barnard (2013) The development of a light weight composite conveyor belt idler roller. [USQ Project] (Unpublished)

Manthey, Nathan W. and Cardona, Francisco and Francucci, Gaston and Aravinthan, Thiru (2013) Thermo-mechanical properties of epoxidized hemp oil-based bioresins and biocomposites. Journal of Reinforced Plastics and Composites , 32 (19). pp. 1444-1456. ISSN 0731-6844

White, Christopher (2013) Wireless grain silo monitoring and control. [USQ Project] (Unpublished)

Manalo, A. and Maranan, G. and Erp, G. V. (2013) Glue-laminated composite sandwich beams for structural engineering and construction. In: 13th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC13), 11-13 Sep 2013, Sapporro, Japan.

Al-Baghdadi, Jasim Ahmed Ali and Chong, Albert K. and Alshadli, Duaa (2013) Compensation of measurement errors caused by glass refraction for photogrammetric plantar surface mapping. Photogrammetric Record , 28 (143). pp. 261-275. ISSN 0031-868X

Mai-Duy, N. and Phan-Thien, N. and Khoo, B. C. and Tran-Cong, T. (2013) Modelling of solid bodies in dissipative particle dynamics. In: 3rd International Conference on Particle-based Methods Fundamentals and Applications (Particles 2013): Particle-Based Methods III: Fundamentals and Applications , 18-20 Sep 2013, Stuttgart, Germany.

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2013) The air fuel ratio study for the mixture of biogas and hydrogen on mild combustion. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Fang, Zhengping and Shang, Shuying and Wang, Hao (2013) Confinement of C60 nanoparticles on the dynamics of polystyrene studied by anelastic spectroscopy and rheometrics. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Peauril, J. and Epaarachchi, J. and Lau, K. T. and Wang, H. (2013) Embedded fibre optic sensors under multi-axial loading: a pilot study. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Lau, K. T. (2013) Indexing damage using distortion of embedded FBG sensor response spectra. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Hafizi, Z. M. and Kahandawa, G. C. and Epaarachchi, J. and Lau, K. T. and Canning, J. and Cook, K. (2013) NIR fibre bragg grating as dynamic sensor: an application of 1D digital wavelet analysis for signal denoising. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Hamawand, Ihsan and Yusaf, Talal (2013) Particles motion in a cascading rotary drum dryer. Canadian Journal of Chemical Engineering . pp. 1-15. ISSN 0008-4034 (In Press)

Wandel, Andrew P. (2013) Conditional dissipation of scalars in homogeneous turbulence: closure for MMC modelling. Combustion Theory and Modelling , 17 (4). pp. 707-748. ISSN 1364-7830

Yu, Bao Yi and Wang, Qing and Li, Qiang and Wu, Yu Juan and Chen, Yan (2013) Interface microstructure and mechanical properties of copper/aluminum composite material. In: 3rd International Conference on Advanced Engineering Materials and Technology (AEMT 2013), 11-12 May 2013, Zhangjiajie, China.

Hashempour, Javad and Sharifian, Ahmad (2013) Optimizing the coupling of a firebrand generator to a horizontal wind tunnel. Proceedings of the 2nd International Conference on Energy and Environmental Protection (ICEEP 2013). pp. 971-976. ISSN 1022-6680

Cao, Lei and Xiang, Wei (2013) Symbol detection with network coding in wireless channels. IEEE Communications Letters , 17 (8). pp. 1528-1531. ISSN 1089-7798

Wang, Jing and Hurren, Christopher and Sutti, Alessandra and Lin, Tong and Wang, Xungai (2013) Thermo-responsive PNIPAM nanofibres crosslinked by OpePOSS. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Burton, Lorelle J. and Dowling, David G. (2013) Towards an engineering career appraisal tool for secondary school students. In: 41st Annual Engineering Education Conference(SEFI 2013): Engineering Education Fast Forward 1973-2013 , 16-20 Sep 2013, Leuven, Belgium.

Mai-Duy, N. and Phan-Thien, N. and Khoo, B. C. (2013) A numerical study of strongly overdamped dissipative particle dynamics (DPD) systems. Journal of Computational Physics , 245. pp. 150-159. ISSN 0021-9991

Yusaf, T. and Baker, P. and Hamawand, I. and Noor, M. M. (2013) Effect of compressed natural gas mixing on the engine performance and emissions. International Journal of Automotive and Mechanical Engineering, 8. pp. 1416-1429. ISSN 2229-8649

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2013) Detail guide for CFD on the simulation of biogas combustion in bluff-body mild burner. In: 2nd International Conference of Mechanical Engineering Research (ICMER 2013): Green Technology for Sustainable Environment, 1-3 Jul 2013, Pahang, Malaysia.

Yusaf, Talal and Noor, M. M. and Wandel, Andrew P. (2013) Mild combustion: the future for lean and clean combustion. In: 2nd International Conference of Mechanical Engineering Research (ICMER 2013): Green Technology for Sustainable Environment, 1-3 Jul 2013, Pahang, Malaysia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2013) The analysis of recirculation zone and ignition position of non-premixed bluff-body for biogas mild combustion. In: 2nd International Conference of Mechanical Engineering Research (ICMER 2013): Green Technology for Sustainable Environment, 1-3 Jul 2013, Pahang, Malaysia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2013) The development of MILD combustion open burner experimental setup. In: 2nd International Conference of Mechanical Engineering Research (ICMER 2013): Green Technology for Sustainable Environment, 1-3 Jul 2013, Pahang, Malaysia.

Etaati, A. and Wang, H. and Pather, S. and Yan, Z. and Mehdizadeh, S. Abdanan (2013) 3D X-ray microtomography study on fibre breakage in noil hemp fibre reinforced polypropylene composites. Composites Part B: Engineering, 50. pp. 239-246. ISSN 1359-8368

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2013) An investigation of acoustic emission signal attenuation for monitoring of progressive failure in fiberglass reinforced composite laminates. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1442-1456. ISSN 2229-8649

Lam-Dao, Nguyen and Le-Toan, Thuy and Apan, Armando and Huth, Juliane and Hoang-Phi, Phung (2013) Rice monitoring in the Mekong Delta, Vietnam. In: 33rd Asian Conference on Remote Sensing (ACRS 2012): Aiming Smart Space Sensing, 26-30 Nov 2012, Pattaya, Thailand.

McDougall, Kevin and Bennett, Rohan and Molen, Paul van der (2013) The global cadastre. GIM International , 27 (7). pp. 30-34. ISSN 1566-9076

Billingsley, John (2013) The Turtle, a legged submerged inspection vehicle. In: 16th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines (CLAWAR 2013), 14-17 Jul 2013, Sydney, Australia.

Etaati, Amir and Dehghani, Kamran (2013) A study on hot deformation behavior of Ni-42.5Ti-7.5Cu alloy. Materials Chemistry and Physics, 140 (1). pp. 208-215. ISSN 0254-0584

Yousif, B. F. (2013) Design of newly fabricated tribological machine for wear and frictional experiments under dry/wet condition. Materials and Design, 48. pp. 2-13. ISSN 0261-3069

Wang, Yafeng and Qin, Lin and Xiang, Wei (2013) Generalized analysis on diversity-multiplexing trade-off of relay protocols. Applied Mathematics and Information Sciences, 7 (2L). pp. 511-517. ISSN 1935-0090

Shalwan, A. and Yousif, B. F. (2013) In state of art: mechanical and tribological behaviour of polymeric composites based on natural fibres. Materials and Design, 48. pp. 14-24. ISSN 0264-1275

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2013) Mechanical properties characterization of the skin and core of a novel composite sandwich structure. Journal of Composite Materials, 47 (14). pp. 1785-1800. ISSN 0021-9983

Pan, Dingyi and Phan-Thien, Nhan and Mai-Duy, Nam and Khoo, Boo Cheong (2013) Numerical investigations on the compressibility of a DPD fluid. Journal of Computational Physics, 242. pp. 196-210. ISSN 0021-9991

Yousif, B. F. (2013) SI: materials, design and tribology [Editorial]. Materials and Design, 48. ISSN 0264-1275

Manalo, A. C. (2013) Behaviour of fibre composite sandwich structures under short and asymmetrical beam shear tests. Composite Structures, 99. pp. 339-349. ISSN 0263-8223

Azwa, Z. N. and Yousif, B. F. and Manalo, A. C. and Karunasena, W. (2013) A review on the degradability of polymeric composites based on natural fibres. Materials and Design, 47. pp. 424-442. ISSN 0264-1275

Guades, Ernesto Jusayan (2013) Behaviour of glass FRP composite tubes under repeated impact for piling application. [Thesis (PhD/Research)] (Unpublished)

Guades, Ernesto and Aravinthan, Thiru and Manalo, Allan and Islam, Mainul (2013) Damage modelling of repeatedly impacted square fibre-reinforced polymer composite tube. Materials and Design, 47. pp. 687-697. ISSN 0264-1275

Yue, Xuejun and Wang, Yefu and Hong, Tiansheng and Xu, Xing and Liu, Yongxin and Zhang, Zongjie (2013) WSN layout experiment based on radio frequency propagation tests in citrus orchard. Transactions of the Chinese Society for Agricultural Machinery (Nongye Jixie Xuebao), 44 (5). pp. 213-218. ISSN 1000-1298

Salim, Omar Hazim and Xiang, Wei and Leis, John (2013) An efficient unequal error protection scheme for 3-D video transmission. In: IEEE Wireless Communication and Networking Conference (WCNC 2013): Connecting the Future, 7-10 Apr 2013, Shanghai, China.

Albdiry, M. T. and Yousif, B. F. and Ku, H. and Lau, K. T. (2013) A critical review on the manufacturing processes in relation to the properties of nanoclay/polymer composites. Journal of Composite Materials, 47 (9). pp. 1093-1115. ISSN 0021-9983

Abbas, Mohd Azwan and Setan, Halim and Majid, Zulkepli and Lichti, Derek D. and Chong, Albert K. (2013) A self-calibration of the Leica Scan Station C10 scanner. In: Business Engineering and Industrial Applications Colloquium (BEIAC 2013), 7-9 Apr 2013, Langkawi, Malaysia.

Cai, Kun and Yue, Xuejun and Hong, Tiansheng and Xu, Xing and Huang, Shuangping (2013) Design of soil moisture sensor based on phase-frequency characteristics of RC networks. Transactions of the Chinese Society of Agricultural Engineering , 29 (7). pp. 36-43. ISSN 1002-6819

Al-Doori, Ghassan Fadil Lattif (2013) Investigation of refrigeration system steam ejector performance through experiments and computational simulations. [Thesis (PhD/Research)] (Unpublished)

Manalo, Allan (2013) Structural behaviour of a prefabricated composite wall system made from rigid polyurethane foam and magnesium oxide board. Construction and Building Materials, 41. pp. 642-653. ISSN 0950-0618

Abbas, Mohd Azwan and Setan, Halim and Majid, Zulkepli and Chong, Albert K. and Idris, Khairulnizam M. and Aspuri, Anuar (2013) Calibration and accuracy assessment of Leica ScanStation C10 terrestrial laser scanner. In: International Workshop on Geoinformation Advances 2012, 7-8 Nov 2012, Johor, Malaysia.

Mai-Duy, N. and Pan, D. and Phan-Thien, N. and Khoo, B. C. (2013) Dissipative particle dynamics modeling of low Reynolds number incompressible flows. Journal of Rheology, 57 (2). pp. 585-604. ISSN 0148-6055

Kist, Alexander A. and Gibbings, Peter and Maxwell, Andrew (2013) From individual Remote Access Laboratory implementations to institutional learning tools. In: 2013 IEEE Global Engineering Education Conference (EDUCON), 13-15 Mar 2013, Berlin, Germany.

Chong, Albert K. and Majid, Zulkepli (2013) Low-cost compact high-speed camera for human motion study. In: International Workshop on Geoinformation Advances 2012, 7-8 Nov 2012, Johor Baharu, Malaysia.

Ho, Mei-Po and Wang, Hao and Lau, Kin-Tak and Leng, Jinsong (2013) Effect of silk fiber to the mechanical and thermal properties of its biodegradable composites. Journal of Applied Polymer Science , 127 (4). pp. 2389-2396. ISSN 0021-8995

Ku, Harry and Cardona, Francisco and Jamal Eddine, Mustapha (2013) Thermal properties of calcium carbonate powder reinforced vinyl ester composites: pilot study. Journal of Applied Polymer Science , 127 (4). pp. 2996-3001. ISSN 0021-8995

Ghabraie, Behrooz and Ren, Gang and Ghabraie, Kazem and Xie, Yi Min (2013) A study on truss bolt mechanism in controlling stability of underground excavation and cutter roof failure. Geotechnical and Geological Engineering, 31 (2). pp. 667-682. ISSN 0960-3182

Thota, N. M. and Epaarachchi, J. A. and Lau, K. T. (2013) Important aspects of finite element modeling of low density thermo plastic closed cell foams. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

Naji, Ahmed Adel (2013) A comparison of measured diesel emissions in agriculture and Australian National Standard Emission Factors. [Thesis (PhD/Research)] (Unpublished)

An-Vo, Duc-Anh (2013) C2-Element radial basis function methods for some continuum mechanics problems. [Thesis (PhD/Research)] (Unpublished)

Deo, Ravinesh C. and Nathan, Graham J. and Mi, Jianchun (2013) Similarity analysis of the momentum field of a subsonic, plane air jet with varying jet-exit and local Reynolds numbers. Physics of Fluids, 25 (1). 015115-1. ISSN 1070-6631

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2013) A review on the characteristics of gomuti fibre and its composites with thermoset resins. Journal of Reinforced Plastics and Composites, 32 (2). pp. 124-136. ISSN 0731-6844

Nguyen-Ky, T. and Wen, Peng and Li, Yan (2013) Chaos-modified detrended moving average methodology for monitoring the depth of anaesthesia. International Journal of Emerging Trends in Signal Processing, 1 (2). pp. 1-8.

Ghabraie, Behrooz and Ren, Gang and Ghabraie, Kazem (2013) Effects of thickness of roof layers on optimum design of truss bolt system using finite element modeling techniques. Electronic Journal of Geotechnical Engineering, 13 (A). pp. 147-158.

He, Yu-xin and Li, Qi and Kuila, Tapas and Kim, Nam Hoon and Jiang, Tongwu and Lau, Kin-tak and Lee, Joong Hee (2013) Micro-crack behavior of carbon fiber reinforced thermoplastic modified epoxy composites for cryogenic applications. Composites Part B: Engineering , 44 (1). pp. 533-539. ISSN 1359-8368

Shahid, Salman and Wen, Peng and Ahfock, Tony (2013) Numerical investigation of white matter anisotropic conductivity in defining current distribution under tDCS. Computer Methods and Programs in Biomedicine, 109 (1). pp. 48-64. ISSN 0169-2607

Li, Qiang and Wang, Hao and Zhang, Zuhua and Reid, Andrew (2013) Numerical simulation of porosity on thermal properties and fire resistance of foamed concrete. Journal of Sustainable Cement-Based Materials, 2 (1). pp. 13-19. ISSN 2165-0373

Etaati, Amir and Dehghani, Kamran and Ebrahimi, G. R. and Wang, Hao (2013) Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations. Metals and Materials International, 19 (1). pp. 5-9. ISSN 1598-9623

Guades, Ernesto and Aravinthan, Thiru (2013) Residual properties of square FRP composite tubes subjected to repeated axial impact. Composite Structures, 95. pp. 354-365. ISSN 0263-8223

Alsaeed, T. and Yousif, B. F. and Ku, H. (2013) The potential of using date palm fibres as reinforcement for polymeric composites. Materials and Design, 43. pp. 177-184. ISSN 0264-1275

Thai-Quang, N. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2013) A direct forcing immersed boundary method employed with compact integrated RBF approximations for heat transfer and fluid flow problems. CMES Computer Modeling in Engineering and Sciences, 96 (1). pp. 49-90. ISSN 1526-1492

Zhuge, Yan (2013) A review of aerogels and their application as a multi-functional building material. Applied Mechanics and Materials, 253-25. pp. 564-567. ISSN 1660-9336

Aldousiri, B. and Shalwan, A. and Chin, C. W. (2013) A review on tribological behaviour of polymeric composites and future reinforcements. Advances in Materials Science and Engineering , 2013. pp. 1-8. ISSN 1687-8434

An-Vo, D. - A. and Mai-Duy, N. and Tran, C. - D. and Tran-Cong, T. (2013) ADI method based on C^2-continuous two-node integrated-RBF elements for viscous flows. Applied Mathematical Modelling, 37 (7). pp. 5184-5203. ISSN 0307-904X

Nguyen-Ky, Tai and Wen, Peng and Li, Yan (2013) An improved chaos method for monitoring the depth of anaesthesia. In: Proceedings of the International Conference on Computing, Management and Telecommunications (ComManTel 2013), 21-24 Jan 2013, Ho Chi Minh City, Vietnam.

Nguyen-Ky, Tai and Wen, Peng (Paul) and Li, Yan (2013) Consciousness and depth of anesthesia assessment based on Bayesian analysis of EEG signals. IEEE Transactions on Biomedical Engineering, 60 (6). pp. 1488-1498. ISSN 0018-9294

Manthey, Nathan William (2013) Development of hemp oil based bioresins for biocomposites. [Thesis (PhD/Research)] (Unpublished)

Hamawand, Ihsan (2013) Drying steps under superheated steam: a review and modeling. Energy and Environment Research , 3 (2). pp. 107-125. ISSN 1927-0569

Burgess, R. and Ahfock, A. (2013) Evaluation of neutral voltages in arc suppression coil systems. Australian Journal of Electrical and Electronics Engineering , 10 (1). pp. 127-136. ISSN 1448-837X

Yan, Zili and Zhang, Jianchun and Zhang, Hua and Wang, Hao (2013) Improvement of mechanical properties of noil hemp fiber reinforced polypropylene composites by resin modification and fiber treatment. Advances in Materials Science and Engineering, 2013. pp. 1-7. ISSN 1687-8434

Manalo, A. C. and Karunasena, W. and Lau, K. T. (2013) Mechanical properties of bamboo fiber-polyester composites. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Aldousiri, B. and Alajmi, M. and Shalwan, A. (2013) Mechanical properties of palm fibre reinforced recycled HDPE. Advances in Materials Science and Engineering , 2013. pp. 1-7. ISSN 1687-8434

Hafizi, Mohd Zohari and Epaarachchi, Jayantha Ananda and Lau, K. T. (2013) Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test. Structural Health Monitoring: Research and Applications (558). pp. 65-75. ISSN 1013-9826

Albdiry, M. T. and Yousif, B. F. (2013) Morphological structures and tribological performance of unsaturated polyester based untreated/silane-treated halloysite nanotubes. Materials and Design, 48. pp. 68-76. ISSN 0264-1275

Kist, Alexander A. and Phythian, Mark (2013) Peer assessment of recorded student presentations. In: AaeE 2013: Work Integrated Learning – Applying Theory to Practice in Engineering Education, 8-11 Dec 2013, Gold Coast, Australia.

Gibbings, Peter and Lidstone, John and Bruce, Christine (2013) Students' experience of problem-based learning in virtual space [NYP 29/10/13]. Higher Education Research and Development. ISSN 0729-4360 (In Press)

Lau, Mei-Ling (2013) The preliminary study on the mechanical properties of heat-treated bovine bone using experimental and simulations approaches. [Thesis (PhD/Research)] (Unpublished)

Nirmal, Umar and Hashim, Jamil and Rilling, Dirk and Brevern, P. V. and Yousif, B. F. (2013) Tribo performance of T-BFRP composite subjected to dry/wet contact conditions. In: Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Advances in Materials Science (2). Apple Academic Press (CRC Press), Toronto, Canada, pp. 311-326. ISBN 978-1-926895-16-1

Long, Hang and Xiang, Wei and Zhang, Yueying and Wang, Jing and Wu, Bin (2012) Analysis of unitary distributed spatial-temporal precoding in MIMO relay systems. In: 12th IEEE International Conference on Computer and Information Technology, 27-29 Oct 2012, Chengdu, China.

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2012) Local moving least square-one-dimensional integrated radial basis function networks technique for incompressible viscous flows. International Journal for Numerical Methods in Fluids, 70 (11). pp. 1443-1474. ISSN 0271-2091

Karimkashi, Shervin and Kermani, Mohammad J. and Sharifian, Ahmad and Hashempour, Javad (2012) Numerical computation of pressure drop across an off supplementary firing burner in heat recovery steam generator. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Al-Atresh, R. S. and Sharifian, S. A. and Al-Faruk, A. (2012) The effect of inlet velocity and temperature on the strength of the swirling induced by a spilt channel: a CFD approach. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of full-scale railway turnout sleepers from glue-laminated fibre composite sandwich structures. Journal of Composites for Construction, 16 (6). pp. 724-736. ISSN 1090-0268

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2012) A review of mild combustion and open furnace design consideration. International Journal of Automotive and Mechanical Engineering, 6 (1). pp. 730-754. ISSN 2229-8649

Dowling, David and Kavanagh, Lydia and Goldfinch, Tom (2012) Building a career in engineering education. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

Alajel, Khalid and Xiang, Wei and Sileh, Ibrahim (2012) Color plus depth 3-D video transmission with hierarchical 16-QAM. In: 6th International Conference on Signal Processing and Communication Systems (ICSPCS 2012) , 12-14 Dec 2012, Gold Coast, Australia.

Wen, Peng (2012) Consciousness, EEG and depth of anaesthesia monitoring. Australasian Physical and Engineering Science in Medicine, 35 (4). pp. 389-392. ISSN 0158-9938

Ho, Mei-po and Wang, Hao and Lee, Joong-Hee and Ho, Chun-kit and Lau, Kin-tak and Leng, Jinsong and Hui, David (2012) Critical factors on manufacturing processes of natural fibre composites. Composites Part B: Engineering, 43 (8). pp. 3549-3562. ISSN 1359-8368

Jolly, Lesley and Brodie, Lyn and Prpic, Juliana Kaya and Crosthwaite, Caroline and Kavanagh, Lydia and Buys, Laurie (2012) Curriculum development and educational research: the barriers to good practice and what to do about them. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 2-5 Dec 2012, Melbourne, Australia.

Dowling, David and Hadgraft, Roger (2012) Defining your discipline to authenticate your curriculum. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 2-5 Dec 2012, Melbourne, Australia.

Kahandawa, G. C. and Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) Detecting delamination in a composite structure using an embedded FBG – AE hybrid system. In: 7th Australasian Congress on Applied Mechanics (ACAM 7), 9-12 Dec 2012, Adelaide, Australia.

Burton, Lorelle and Dowling, David and Kavanagh, Lydia and O'Moore, Liza and Wilkes, Janelle (2012) Examining first year students' preparedness for studying engineering. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

Burton, Lorelle J. and Dowling, David G. and Kavanagh, Lydia and O'Moore, Liza and Aubrey, Tim and Lowe, David and Wilkes, Janelle and Glencross-Grant, Rex and McBride, William (2012) Get set for success: an update on the EngCAT project. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

Basnet, Badri and Basson, Marita and Hobohm, Carola and Cochrane, Sandra (2012) Students' self-assessment of assignments - is it worth it? In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 2-5 Dec 2012, Melbourne, Australia.

Thorpe, David (2012) Towards authentic assessment - an evaluation of assessment in a postgraduate engineering asset management course. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 2-5 Dec 2012, Melbourne, Australia.

Jolly, Hannah and Brodie, Lyn and Midgley, Warren (2012) Understanding best practice in engineering education using the concept of pedagogical content knowledge. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

Ghude, Sarang and Billingsley, John (2012) Iterative fast model control strategy with state constraints: an example of aircraft lateral control. In: 19th International Conference on Mechatronics and Machine Vision in Practice (M2VIP 2012), 28-30 Nov 2012, Auckland, New Zealand.

Wang, Gengkun and Xiang, Wei and Yuan, Jinhong (2012) Outage performance for compute-and-forward in generalized multi-way relay channels. IEEE Communications Letters, 16 (12). pp. 2099-2102. ISSN 1089-7798

Wardana, I. N. G. (2012) Burning characteristics of coconut oil In micro-combustor. In: USQ Combustion Meeting, 26 Nov 2012, Toowoomba, Australia.

Wardana, I. N. G. (2012) Premixed combustion of coconut oil in a hele-shaw shell. In: USQ Combustion Meeting, 26 Nov 2012, Toowoomba, Australia.

Ku, H. and Yap, Y. S. and Lee, T. S. and Trada, M. (2012) Tensile properties of phenol-formaldehyde nanoclay reinforced composites: a pilot study. Journal of Applied Polymer Science, 126 (s2). E142-E150. ISSN 0021-8995

Nguyen, T. and Ghabraie, K. and Tran-Cong, T. (2012) Tunnel reinforcement optimisation for nonlinear material. In: 4th International Conference on Computational Methods (ICCM 2012), 25-28 Nov 2012, Gold Coast, Australia.

Yusaf, T. F. and Al-Juboori, Raed Ahmed (2012) Investigating the efficiency of ultrasound for controlling bio-fouling in batch membrane systems. In: USQ Combustion Meeting, 21 Nov 2012, Toowoomba, Australia. (Unpublished)

Yusaf, T. F. and Al-lwayzy, Saddam H. (2012) The use of microalgae biodiesel in diesel engine: production, extraction and engine performance. In: USQ Combustion Meeting, 21 Nov 2012, Toowoomba, Australia. (Unpublished)

Manalo, A. C. (2012) Recent developments on fibre composite sandwich structures in civil infrastructure. In: 6th International Composites Conference (ACUN 6): Composite and Nanocomposites in Civil, Offshore and Mining Infrastructure, 14-16 Nov 2012, Melbourne, Australia.

Falzon, P. J. and Leong, K. H. and McGarva, L. and Leong, Y. L. and Manalo, A. and Virk, A. and Leipnik, D. and Djukic, L. (2012) Development and assessment of a carbon fibre reinforced composite repair system. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Mai-Cao, L. and Tran-Cong, T. (2012) A new IRBFN scheme for the numerical simulation of interfacial flows. In: 4th International Conference on Computational Methods (ICCM 2012), 25-28 Nov 2012, Gold Coast, Australia.

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Al-Baghdadi, Jasim Ahmed and Chong, Albert K. and McDougall, Kevin and Alshadli, Duaa (2012) An investigation of the 3-dimensional surface capture techniques of the human foot. In: International Workshop on Geoinformation Advances 2012, 7-8 Nov 2012, Johor Bahru, Malaysia.

Hoang-Trieu, T.-T. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2012) Compact local integrated RBF stencil based on finite volume formulation for second-order differential problems. In: 4th International Conference on Computational Methods (ICCM 2012), 25-28 Nov 2012, Gold Coast, Australia.

Yang, T. and Yao, X. and Zhang, Z. and Wang, H. (2012) Effects of ground granulated blast furnace slag on the mechanical and microstructure of fly ash-based geopolymer binders. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Shahid, S. and Wen, P. and Ahfock, T. (2012) Effects of model complexity and tissue anisotropic conductivity on cortical modulation during transcranial direct current stimulation. IET Science, Measurement and Technology, 6 (6). pp. 464-473. ISSN 1751-8822

Yan, Z. L. and Wang, H. and Lau, K. T. and Zhang, J. C. and Zhang, H. and Ding, Y. (2012) Fabrication process optimization of hemp fibre reinforced polypropylene composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Trada, M. and Mandava, J. and Ku, H. and Yousif, B. (2012) Tensile properties of bagasse reinforced epoxy composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today , 6-8 Nov 2012 , Kuala Lumpur, Malaysia .

Brookshaw, Iain J. and Low, Tobias (2012) Monocular vision, optical blur and visual looming as a basis for mobile robot obstacle avoidance. In: 16th International Conference on Mechatronics Technology (ICMT 2012): Advanced Mechatronics, Precision Measurement and NanoManufacturing, 16-19 Oct 2012, Tianjin, China.

Al-lwayzy, Saddam H. (2012) Alternative fuels from microalgae for diesel engine. In: USQ Combustion Meeting, 10 Oct 2012, Toowoomba, Australia. (Unpublished)

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2012) New concept for optimal application of natural fibre reinforced plastic (NFRP) in building construction. In: 8th Asia Pacific Structural Engineering and Construction Conference and 1st International Conference on Civil Engineering Research (APSEC-ICCER 2012): Sustaining the World with Better Structures and Construction Practice, 2-4 Oct 2012, Surabaya, Indonesia.

Maxwell, Andrew (2012) Work in progress: management of online assessments as a replacement for exams. In: 42nd ASEE/IEEE Frontiers in Education Conference (FIE 2012): Soaring to New Heights in Engineering Education, 3-6 Oct 2012 , Seattle, WA. United States.

Alajel, Khalid Mohamed and Xiang, Wei and Sileh, Ibrahim Khalil (2012) Best relays selection method for error-resilient 3-D video transmission. In: 12th International Symposium on Communications and Information Technologies (ISCIT 2012), 2-5 Oct 2012, Gold Coast, Australia.

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. (2012) Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview. Composites Part B: Engineering, 43 (7). pp. 2883-2892. ISSN 1359-8368

Alajel, Khalid Mohamed and Xiang, Wei (2012) Color plus depth 3-D video transmission with heirarchical 16-QAM. In: 3DTV-CON 2012: The True Vision: Capture, Transmission and Display of 3D Video, 15-17 Oct 2012, Zurich, Switzerland.

Chong, Albert K. (2012) Energy-efficient technique for engineering structural monitoring in the dark. Applied Mechanics and Materials, 209-21. pp. 1847-1851. ISSN 1660-9336

Ho, Mei-po and Wang, Hao and Lau, Kin-tak and Lee, Joong-hee and Hui, David (2012) Interfacial bonding and degumming effects on silk fibre/polymer biocomposites. Composites Part B: Engineering, 43 (7). pp. 2801-2812. ISSN 1359-8368

Kist, Alexander A. and Brodie, Lyn (2012) Quality of service, quality of experience and online learning. In: 42nd ASEE/IEEE Frontiers in Education Conference (FIE 2012): Soaring to new Heights in Engineering Education, 3-6 Oct 2012, Seattle, WA. United States.

Manalo, Allan and Mutsuyoshi, Hiroshi and Matsui, Takahiro (2012) Testing and characterization of thick hybrid fibre composites laminates. International Journal of Mechanical Sciences , 63 (1). pp. 99-109. ISSN 0020-7403

Hairuddin, A. Aziz and Yusaf, Talal F. and Wandel, Andrew P. (2012) HCCI engine: numerical and experimental approach. In: USQ Combustion Meeting, 26 Sep 2012, Toowoomba, Australia. (Unpublished)

Noor, M. M. and Hairuddin, A. Aziz and Wandel, Andrew P. and Yusaf, T. F. (2012) Modelling of non-premixed turbulent combustion of hydrogen using conditional moment closure method. IOP Conference Series: Materials Science and Engineering, 36 (012036). pp. 1-17. ISSN 1757-899X

Yousif, B. F. and Chin, C. W. (2012) Epoxy composite based on kenaf fibers for tribological applications under wet contact conditions. Surface Review and Letters, 19 (5). pp. 1250050-1. ISSN 0218-625X

Tangalajuk Siang, Jeri and Sharifian, Ahmad (2012) Reducing the amount of required propane refrigerant in the condenser of a commercial air-conditioner by increasing the inlet temperature. In: Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Tran, Canh-Dung and Mai-Duy, Nam and Tran-Cong, Thanh (2012) Computation of a Fokker-Planck-equation-based multi-scale model for complex flows using the IRBFN method. In: 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), 10-14 Sep 2012, Vienna, Austria.

Kabir, Mohammad Mazedul (2012) Effects of chemical treatments on hemp fibre reinforced polyester composites. [Thesis (PhD/Research)] (Unpublished)

Yousif, B. F. and Shalwan, A. and Chin, C. W. and Ming, K. C. (2012) Flexural properties of treated and untreated kenaf/epoxy composites. Materials and Design, 40. pp. 378-385. ISSN 0264-1275

Easton, Mark A. and Wang, Hao and Grandfield, John and Davidson, Cameron J. and StJohn, David H. and Sweet, Lisa D. and Couper, Malcolm J. (2012) Observation and prediction of the hot tear susceptibility of ternary Al-Si-Mg alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science , 43 (9). pp. 3227-3238. ISSN 1073-5623

Nikolaevskiy, Victor and Strunin, Dmitry (2012) The role of natural gases in seismics of hydrocarbon reservoirs. In: III-rd International Conference Elastic Wave Effect on Fluid in Porous Media (EWEF 2012), 24-28 Sept 2012, Moscow, Russia.

Kahandawa, Gayan C. and Epaarachchi, Jayantha and Wang, Hao and Lau, K. T. (2012) Use of FBG sensors for SHM in aerospace structures. Photonic Sensors, 2 (3). pp. 203-214. ISSN 1674-9251

Scarmana, G. (2012) From image contours to pixels. In: XXII Congress of the International Society for Photogrammetry and Remote Sensing (ISPRS 2012), 25 Aug – 01 Sept 2012, Melbourne, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) A preliminary study of control parameters for open furnace mild combustion using CFD. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) Mild combustion: a technical review towards open furnace combustion. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) Modal analysis of high frequency acoustic signal approach for progressive failure monitoring in thin composite plates. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) The modelling of the effect of air fuel ratio on unburned hydrocarbons for MILD combustion. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of glued fibre composite sandwich structure in flexure: experiment and fibre model analysis. Materials and Design, 39. pp. 458-468. ISSN 0264-1275

Norton, Aimee A. and Jones, Eric H. and Liu, Y. and Hayashi, K. and Hoeksema, J. T. and Schou, Jesper (2012) How much more can sunspots tell us about the solar dynamo? In: 28th International Astronomical Union Symposium (IAU 2012): Solar and Astrophysical Dynamos and Magnetic Activity, 27-31 Aug 2012, Beijing, China.

Alajel, Khalid Mohamed and Xiang, Wei and Wang, Yafeng (2012) Unequal error protection scheme based hierarchical 16-QAM for 3-D video transmission. IEEE Transactions on Consumer Electronics, 58 (3). pp. 731-738. ISSN 0098-3063

Ghabraie, B. and Ren, G. and Xie, Y. M. and Ghabraie, K. (2012) Study of truss bolt system for highly stressed rock mass using finite element modelling techniques. In: 11th Australia New Zealand Conference on Geomechanics: Ground Engineering in a Changing World, 15-18 July 2012, Melbourne, Australia.

Zhang, Zuhua and Wang, Hao and Provis, John L. and Bullen, Frank and Reid, Andrew and Zhu, Yingcan (2012) Quantitative kinetic and structural analysis of geopolymers. Part 1. The activation of metakaolin with sodium hydroxide. Thermochimica Acta, 539. pp. 23-33. ISSN 0040-6031

Tawfik, Qaidar H. and Karunasena, Warna (Karu) and Cardona, Francisco (2012) Strengthening of corroded steel angles using CFRP. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2012) Design of smart structures for wind turbine blades. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Siuly, (2012) Analysis and classification of EEG signals. [Thesis (PhD/Research)] (Unpublished)

Dehkhoda, Sevda and Hood, Michael and Alehossein, Habib and Buttsworth, David (2012) Analytical and experimental study of pressure dynamics in a pulsed water jet device. Flow, Turbulence and Combustion, 89 (1). pp. 97-119. ISSN 1386-6184

Nicolli, Hugo B. and Bundschuh, Jochen and Blanco, Maria del C. and Tujchneider, Ofelia C. and Panarello, Hector O. and Dapena, Cristina and Rusansky, Jorge E. (2012) Arsenic and associated trace-elements in groundwater from the Chaco-Pampean plain, Argentina: results from 100 years of research. Science of the Total Environment, 429. pp. 36-56. ISSN 0048-9697

Hoinkis, J. and Hermann, M. and Schmidt, S. and Gukelberger, E. and Ghosh, A. and Chatterjee, D. and Bundschuh, J. (2012) Arsenic removal from groundwater by small-scale reverse osmosis unit in rural Bihar, India. In: 4th International Congress on Arsenic in the Environment: Understanding the Geological and Medical Interface of Arsenic (AS 2012), 22-27 July 2012, Cairns, Australia.

Lim, M. C. and Setan, H. and Othman, R. and Chong, A. K. (2012) Deformation detection for ISKANDARnet. Survey Review , 44 (326). pp. 198-207. ISSN 0039-6265

Litter, Marta I. and Bundschuh, Jochen (2012) Emerging options for solving the arsenic problems of rural and periurban areas in Latin America. In: 4th International Congress on Arsenic in the Environment: Understanding the Geological and Medical Interface of Arsenic (AS 2012), 22-27 Jul 2012, Cairns, Australia.

Meor Said, Mior Azman (2012) In-Cylinder radiation heat transfer in a small direct injection diesel engine. [Thesis (PhD/Research)] (Unpublished)

Bundschuh, Jochen and Litter, Marta I. and Parvez, Faruque and Roman-Ross, Gabriela and Nicolli, Hugo B. and Jean, Jiin-Shuh and Liu, Chen-Wuing and Lopez, Dina and Armienta, Maria A. and Guilherme, Luiz R. G. and Cuevas, Alina Gomez and Cornejo, Lorena and Cumbal, Luis and Toujaguez, Regla (2012) One century of arsenic exposure in Latin America: a review of history and occurrence from 14 countries. Science of the Total Environment, 429. pp. 2-35. ISSN 0048-9697

Ku, Harry S. (2012) Processing of materials using electromagnetic fields. In: Wiley encyclopedia of composites, 2nd ed. John Wiley & Sons, Inc., Hoboken, NJ. United States, pp. 2487-2500. ISBN 978-0-470-12828-2

Widodo, Agung Sugeng (2012) Temperature variations in a free piston compression wind tunnel. [Thesis (PhD/Research)] (Unpublished)

Long, Hang and Xiang, Wei and Liu, Hongmei and Shen, Shanshan (2012) Diversity analysis of two-way MIMO relaying system based on zero-forcing. In: IEEE International Conference on Communications (ICC 2012): Connect, Communicate, Collaborate, 10-15 Jun 2012, Ottawa, ON. Canada.

Mo, Chun-li and Li, Qiang and Guo, Xu-ming and Wang, Hao (2012) Numerical simulation the temperature field of the multi-coil batch during annealing process in Bell-type furnace. In: 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012), 6 Jul 2012, Zhuhai, China.

Ghabraie, Kazem (2012) Applications of topology optimization techniques in seismic design of structure. In: Structural seismic design optimization and earthquake engineering: formulations and applications. IGI Publishing (IGI Global), Hershey, PA. United States, pp. 232-268. ISBN 978-1-4666-164-0

Long, Hang and Xiang, Wei and Shen, Shanshan and Zhang, Yueying and Zheng, Kan and Wang, Wenbo (2012) Analysis of conditional error rate and combining schemes in HARQ. IEEE Transactions on Signal Processing, 60 (5). pp. 2677-2682. ISSN 1053-587X

Cardona, Francisco (2012) Bio-resins: new structural renewable materials for bio-composite applications. In: 4th KKU International Engineering Conference: Driving Together Towards ASEAN Economic Community (KKU-IENC 2012) , 10-12 May 2012, Khon Kaen University, Thailand.

Choy, Y. S. and Liu, Y. and Cheung, H. Y. and Xi, Q. and Lau, K. T. (2012) Development of composite plate for compact silencer design. Journal of Sound and Vibration, 331 (10). pp. 2348-2364. ISSN 0022-460X

Wang, Yafeng and Wang, Zhuo and Xiang, Wei (2012) Distributed queue information based scheduling scheme for relay systems with wireless backhaul link. Advanced Science Letters, 11 (1). pp. 253-257. ISSN 1936-6612

Wang, Yafeng and Ding, Wenbo and Xiang, Wei (2012) Influence of beamforming on interference distribution of wireless network. Advanced Science Letters, 11 (1). pp. 148-153. ISSN 1936-6612

Goh, Steven and Baker, Nelson (2012) Need for a global accord for the postgraduate learning of engineers. In: 13th IACEE World Conference on Continuing Engineering Education (WCCEE 2012), 17-19 May 2012, Valencia, Spain.

Eichmann, T. N. and Khan, R. and McIntyre, T. J. and Jacobs, C. and Porat, H. and Buttsworth, D. and Upcroft, B. (2012) Radiometric temperature analysis of the Hayabusa spacecraft re-entry. In: 28th International Symposium on Shock Waves (ISSW 28), 17-22 Jul 2011, Manchester, United Kingdom.

Buttsworth, David and Jacobs, Peter and Potter, Daniel and Mudford, Neil and D'Souza, Mary and Eichmann, Troy and Jenniskens, Peter and McIntyre, Tim and Jokic, Michael and Jacobs, Carolyn and Upcroft, Ben and Khan, Razmi and Porat, Hadas and Neely, Andrew and Lohle, Stefan (2012) Super-orbital re-entry in Australia: laboratory measurement, simulation and flight observation [Keynote lecture]. In: ISSW28: 28th International Symposium on Shock Waves, 17-22 Jul 2011, Manchester, United Kingdom.

Manalo, A. C. and Aravinthan, T. and Mutsuyoshi, H. and Matsui, T. (2012) Composite behaviour of a hybrid FRP bridge girder and concrete deck. Advances in Structural Engineering, 15 (4). pp. 589-600. ISSN 1369-4332

Ho, Mei-po and Lau, Kin-tak (2012) Design of an impact resistant glass fibre/epoxy composites using short silk fibres. Materials and Design, 35 (1). pp. 664-669. ISSN 0261-3069

Manalo, Allan C. and Aravinthan, Thiru (2012) Mechanical behaviour of a new type of fibre composite railway sleeper. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Karu (2012) Prediction of the flexural behavior of fibre composite sandwich beams. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Guades, Ernesto J. and Aravinthan, Thiru and Islam, Md. Mainul and Manalo, Allan C. (2012) Stiffness of FRP pultruded tubes under repeated axial impacts. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Yousif, Belal F. (2012) Adhesive wear characteristics of natural fiber-reinforced composites. In: Wear of advanced materials. John Wiley & Sons, Inc., London, United Kingdom, pp. 61-97. ISBN 978-1-84821-352-4

Manalo, Allan and Mutsuyoshi, Hiroshi (2012) Behavior of fiber-reinforced composite beams with mechanical joints. Journal of Composite Materials, 46 (4). pp. 483-496. ISSN 0021-9983

Tawfik, Qaidar H. (2012) Rehabilitation of deteriorated steel truss members using CFRP. [Thesis (PhD/Research)] (Unpublished)

Ho, Mei-Po (2012) Strengthening mechanism and bio-degradability of a silk-based polymer composite. [Thesis (PhD/Research)] (Unpublished)

Awad, Ziad K. and Yusaf, Talal (2012) Fibre composite railway sleeper design by using FE approach and optimization techniques. Structural Engineering and Mechanics, 41 (2). pp. 231-242. ISSN 1225-4568

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Stevens, Nick (2012) Analysis of a typical railway turnout sleeper system using grillage beam analogy. Finite Elements in Analysis and Design, 48 (1). 1376-1391 . ISSN 0168-874X

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2012) A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials and Design, 33 (1). pp. 534-544. ISSN 0264-1275

Ku, H. and Wong, P. (2012) Contrast on tensile and flexural properties of glass powder reinforced epoxy composites: pilot study. Journal of Applied Polymer Science, 123 (1). pp. 152-161. ISSN 0021-8995

Islam, Md Mainul and Kim, Ho Sung (2012) Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior. Journal of Sandwich Structures and Materials, 14 (1). pp. 111-127. ISSN 1099-6362

Tran, C.-D. and Mai-Duy, N. and Le-Cao, K. and Tran-Cong, T. (2012) A continuum-microscopic method based on IRBFs and control volume scheme for viscoelastic fluid flows. CMES: Computer Modeling in Engineering and Sciences, 85 (6). pp. 499-519. ISSN 1526-1492

Thai-Quang, N. and Le-Cao, K. and Mai-Duy, N. and Tran-Cong, T. (2012) A high-order compact local integrated-RBF scheme for steady-state incompressible viscous flows in the primitive variables. CMES: Computer Modeling in Engineering and Sciences, 84 (6). pp. 528-557. ISSN 1526-1492

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2012) A numerical procedure based on 1D-IRBFN and local MLS-1D-IRBFN methods for fluid-structure interaction analysis. CMES: Computer Modeling in Engineering and Sciences, 83 (5). pp. 459-498. ISSN 1526-1492

Ho, Mei-po and Wang, Hao and Ho, Chun-kit and Lau, Kin-tak (2012) A study on the dynamic mechanical properties of silk fibre composites. Advanced Materials Research, 410. pp. 106-109. ISSN 1022-6680

McDougall, Kevin (2012) An assessment of the contribution of volunteered geographic information during recent natural disasters. In: Spatially enabling government, industry and citizens: research and development perspectives. GSDI Association Press, Needham, MA, United States, pp. 201-214. ISBN 978-0-9852444-0-8

Kiani, Mostafa Kiani Deh and Ghobadian, Barat and Ommi, Fathollah and Najafi, Gholamhassan and Yusaf, Talal (2012) Artificial neural networks approach for the prediction of thermal balance of SI engine using ethanol-gasoline blends. In: 2012 International Cross-Domain Conference and Workshop on Availability, Reliability, and Security (CD-ARES 2012), 20-24 Aug 2012, Prague, Czech Republic.

Lau, Mei-ling and Lau, Kin-tak and Ku, Harry and Bahattacharyya, Debes and Lee, Joong-Hee (2012) Assessing heat-treatment effects on bovine cortical bones by nanoindentation. Processing and Fabrication of Advanced Materials. pp. 110-113. ISSN 1022-6680

Brodie, I. M. and Hellyer, L. (2012) Comparison of plagiarism rates between oncampus and offcampus engineering hydrology students. In: 40th SEFI Annual Conference: Engineering Education 2020: Meet the Future (SEFI 2012), 23-26 Sept 2012, Thessaloniki, Greece.

Kabir, Mohammad Mazedul and Wang, Hao and Lau, Alan and Cardona, Francisco and Aravinthan, Thiru (2012) Compressive properties of chemically-treated hemp fibre reinforced composites. In: Composites Australia and CRC-ACS, 2012 Conference: Diversity in Composite, 15-16 Mar 2012, Leura, Australia.

Crosthwaite, Caroline and Jolly, Lesley and Brodie, Lyn and Kavanagh, Lydia and Buys, Laurie and Turner, Jennifer (2012) Curriculum design and higher order skills: challenging assumptions. In: 5th International Conference: Innovation, Practice and Research in Engineering Education (EE 2012), 18-20 Sep 2012, Coventry, United Kingdom.

Choy, Y. S. and Liu, Y. and Lau, K. T. (2012) Duct noise control by using very light composite plate. Advanced Materials Research, 410. pp. 361-365. ISSN 1022-6680

Aldraho, Abdelnour and Kist, Alexander A. (2012) Enabling energy efficient and resilient networks using dynamic topologies. In: 2012 Sustainable Internet and ICT for Sustainability (SustainIT 2012), 4-5 Oct 2012, Pisa, Italy.

Devine, J. (2012) Exploring Bourdieu for engineering education research. In: 40th SEFI Annual Conference: Engineering Education 2020: Meet the Future (SEFI 2012), 23-26 Sept 2012, Thessaloniki, Greece.

Ku, H. and Donald, M. and Cardona, F. and Trada, M. (2012) Flexural properties of sawdust-reinforced epoxy composites post-cured in microwaves. Journal of Composite Materials, 46 (22). pp. 2879-2890. ISSN 0021-9983

Ku, H. and Prajapati, M. and Trada, M. (2012) Fracture toughness of vinyl ester composites reinforced with sawdust and postcured in microwaves. International Journal of Microwave Science and Technology, 2012 (Articl). ISSN 1687-5826

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2012) Local moving least square - one-dimensional IRBFN technique: part 1 - natural convection flows in concentric and eccentric annuli. CMES: Computer Modeling in Engineering and Sciences, 83 (3). pp. 275-310. ISSN 1526-1492

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2012) Local moving least square - one-dimensional IRBFN technique: part 11 - unsteady incompressible viscous flows. CMES: Computer Modeling in Engineering and Sciences , 83 (3). pp. 311-351. ISSN 1526-1492

Crosthwaite, C. and Jolly, L. and Brodie, L. and Kavanagh, L. and Buys, L. (2012) Making principled decisions about curriculum development: outcomes of a realist evaluation across 13 universities. In: 40th SEFI Annual Conference: Engineering Education 2020: Meet the Future (SEFI 2012), 23-26 Sept 2012, Thessaloniki, Greece.

An-Vo, D.-A. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2012) Modeling strain localisation in a segmented bar by a C2-continuous two-node integrated-RBF element formulation. In: 34th International Conference on Boundary Elements and other Mesh Reduction Methods (BEM/MRM 2012), 25-27 Jun 2012, Split, Croatia.

Mishra, Ananta Kumar and Bae, Seon-Hyeong and Kim, Nam Hoon and Lau, Kin-tak and Lee, Joong Hee (2012) Nafion-peptized laponite clay nanocomposite membrane for PEMFC. In: 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM 20), 15-18 Dec 2011, Hong Kong.

Wang, Xin and Niu, Haitao and Wang, Xungai and Lin, Tong (2012) Needleless electrospinning of uniform nanofibers using spiral coil spinnerets. Journal of Nanomaterials, 2012. pp. 1-9. ISSN 1687-4110

Kist, Alexander A. and Maxwell, Andrew D. (2012) Network performance and quality of experience of remote access laboratories. International Journal of Online Engineering , 8 (4). pp. 50-57. ISSN 1868-1646

Hafizi, Z. M. and Epaarachchi, J. and Nizwan, C. K. E. and Lau, K. T. (2012) Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study. IOP Conference Series: Materials Science and Engineering, 36 (1). ISSN 1757-8981

Kist, Alexander A. and Maxwell, Andrew (2012) Performance and quality of experience of remote access laboratories. In: IEEE International Conference on Teaching, Assessment, and Learning for Engineering (TALE 2012): Fostering Innovation and Excellence in Engineering Education, 20-23 Aug 2012, Hong Kong, China.

Ariafar, Kavous (2012) Performance evaluation of a model thermocompressor using computational fluid dynamics. International Journal of Mechanics, 6 (1). pp. 35-42. ISSN 1998-4448

Aldraho, Abdelnour and Kist, Alexander A. and Maxwell, Andrew (2012) Performance investigation of dynamic topologies in MPLS networks. In: International Symposium on Communications and Information Technologies (ISCIT), 2-5 Oct 2012, Gold Coast, Australia.

An-Vo, D.-A. and Tran, C.-D. and Mai-Duy, N. and Tran-Cong, T. (2012) RBF computation of multiscale elliptic problems [Keynote paper]. In: 8th ICCES Special Symposium on Meshless & Other Novel Computational Methods (ICCES MM 2012), 2-6 Sep 2012, Budva, Montenegro.

An-Vo, D.-A. and Tran, C.-D. and Mai-Duy, N. and Tran-Cong, T. (2012) RBF-based multiscale control volume method for second order elliptic problems with oscillatory coefficients. CMES: Computer Modeling in Engineering and Sciences, 89 (4). pp. 303-359. ISSN 1526-1492

Cardona, Francisco and Tawfik, Qaidar H. and Karunasena, Karu (2012) Reinforcement of corroded steel structures with CFRP panels. In: ICACE 2012: International Conference on Architectural and Civil Engineering, 24-25 Oct 2012, Bali, Indonesia.

Xie, Shuisheng and Li, Xinggang and Wang, Hao and Zhang, Ying (2012) Semisolid processing technology. Metallurgical Industry Press, Beijing, China. ISBN 978-7-5024-5935-2

Ho-Minh, D. and Mai-Duy, N. and Tran-Cong, T. (2012) Simulation of viscous and viscoelastic flows using a RBF-Galerkin approach. Australian Journal of Mechanical Engineering , 9 (2). pp. 101-112. ISSN 1448-4846

Tarawneh, Mou’ad A. and Ahmad, Sahrim Hj. and EhNoum, SeYong and Lau, Kin-tak (2012) Sonication effect on the mechanical properties of MWCNTs reinforced natural rubber. Journal of Composite Materials. ISSN 0021-9983 (In Press)

Abdulla, Shahab A. and Wen, Peng (2012) The effects of time-delay on feedback control of depth of anesthesia. In: 2012 IEEE-EMBS International Conference on Biomedical and Health Informatics: Global Grand Challenge of Health Informatics (BHI 2012), 2-7 Jan 2012, Hong Kong and Shenzhen, China.

Ho, Mei-po and Wang, Hao and Lau, Kin-tak (2012) Thermal properties and structure conformation on silkworm silk fibre. In: Composites Australia and CRC-ACS, 2012 Conference: Diversity in Composite, 15-16 Mar 2012, Leura, Australia.

McIntyre, T. J. and Khan, R. and Eichmann, T. N. and Upcroft, B. and Buttsworth, D. (2012) Visible and near infrared spectroscopy of Hayabusa re-entry using semi-autonomous tracking. In: 50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition: Advancing the Science of Flight Technology (AIAA 2012) , 9-12 Jan 2012, Nashville, TN. United States.

Dowling, D. G. and Hadgraft, R. G. (2012) What should we teach? Defining your discipline to drive curriculum renewal: an environmental engineering case study. In: 40th SEFI Annual Conference: Engineering Education 2020: Meet the Future (SEFI 2012), 23-26 Sept 2012, Thessaloniki, Greece.

Gibbings, Peter D. and Bullen, Frank (2011) Development and validation of a regional university’s model for community and industry engagement. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Burton, Lorelle J. and Dowling, David G. and Kavanagh, Lydia and Aubrey, Tim (2011) A review of three approaches to determining students’ capabilities for studying engineering. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Dowling, David and Hadgraft, Roger and Lamborn, Julia (2011) Developing an inclusive stakeholder consultation process: a case study. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Dowling, David (2011) Employer perspectives on engineering technician education in Australia. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Dowling, David and Godfrey, Elizabeth (2011) Engineering technician students: do they understand their future role? In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, WA.

Maxwell, Andrew and Noble, Karen and Kist, Alexander A. and Fogarty, Roderick and Gibbings, Peter and Midgley, Warren (2011) Exploring a cross-disciplinary research initiative with remote access laboratories: robot RAL-ly as a stimulus for consideration of engineering pathway. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5–7 Dec 2011, Fremantle, Australia.

Noor, M. M. and Hairuddin, A. Aziz and Wandel, Andrew P. and Yusaf, T. F. (2011) Implementation of conditional moment closure using the Taylor expansion and finite differences. In: 1st International Conference of Mechanical Engineering Research (ICMER 2011), 5-8 Dec 2011, Kuantan, Malaysia.

Scarmana, Gabriel (2011) A contour-based approach to image compression. In: 2011 International Conference on Digital Image Computing: Techniques and Application (DICTA 2011), 6-8 Dec 2011, Noosa, Australia .

Mai-Duy, N. and Tran-Cong, T. (2011) A high-order upwind control-volume method based on integrated RBFs for fluid-flow problems. International Journal for Numerical Methods in Fluids, 67 (12). pp. 1973-1992. ISSN 0271-2091

Albdiry, M. T. and Almosawi, A. I. (2011) Effect of compacting pressure on microstructure and mechanical properties of carbide cutting tools. Powder Metallurgy, 54 (5). pp. 585-591. ISSN 0032-5899

Mann, Llewellyn and Brodie, Lyn and Chang, Rosemary and Howard, Prue (2011) Engineering education research groups in Australia: implications for Australasian engineering educators. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Rao, G. Srinivasa and Sharma, K. V. and Chary, S. P. and Bakar, R. A. and Rahman, M. M. and Kadirgama, K. and Noor, M. M. (2011) Experimental study on heat transfer coefficient and friction factor of Al2O3 nanofluid in a packed bed column. Journal of Mechanical Engineering and Sciences, 1 (1). pp. 1-15.

Devine, Jo and Jolly, Lesley (2011) Questions arising from the use of peer assisted learning as a technique to increase diverse participation in engineering education. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Aravinthan, Thiru and Manalo, Allan (2011) Student performance in an online postgraduate course on fibre composites for civil engineers. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2011) A hybrid EMST-modified Curl's model for turbulent combustion modelling. In: 2011 USQ Research Evening, 17 Nov 2011, Toowoomba, Australia.

Kist, Alexander A. (2011) A framework to evaluate performance from an application and user perspective. In: ATNAC 2011: Australian Telecommunication Networks and Applications Conference, 9-11 Nov 2011, Melbourne, Australia.

Shiau, Jim and Al Abri, Mohammed (2011) A study on the failure mechanisms of horizontal plate anchors in clay. In: ICAGE 2011: International Conference on Advances in Geotechnical Engineering, 7-9 Nov 2011, Perth, Western Australia.

Kelly, C. and Leis, J. and Buttsworth, D. (2011) Development of a photo-acoustic trace gas sensor. In: Australian Acoustical Society Conference (AAS 2011), Acoustics 2011: Breaking New Ground, 2-4 Nov 2011, Gold Coast, Australia.

Liu, Liwi and Liu, Yanju and Leng, Jinsong and Lau, Kin-tak (2011) Electromechanical stability of compressible dielectric elastomer actuators. Smart Materials and Structures, 20 (11). p. 115015. ISSN 0964-1726

Aldraho, Abdelnour and Kist, Alexander A. (2011) Enabling dynamic topologies in communication networks. In: ATNAC 2011: Australian Telecommunication Networks and Applications Conference, 9-11 Nov 2011, Melbourne, Australia.

Huntley, Matthew and Liu, Xiaoye and McDougall, Kevin and Gibbings, Peter (2011) Mapping cycling pathways and route selection using GIS and GPS. In: 2011 Surveying and Spatial Sciences Conference: Innovation in Action: Working Smarter (SSSC 2011), 21-25 Nov 2011, Wellington, New Zealand.

Hairuddin, A. Aziz and Yusaf, Talal F. and Wandel, Andrew P. (2011) Predicting the combustion behaviour of a diesel HCCI engine using a zero-dimensional single-zone model. In: Australian Combustion Symposium 2011 (ACS 2011), 29 Nov-1 Dec 2011, Newcastle, Australia.

Noor, M. M. and Yusaf, T. F. and Wandel, Andrew P. (2011) Study of random particle interactions for analysis of diffusion lengths in turbulent combustion modelling. In: Australian Combustion Symposium 2011 (ACS 2011), 29 Nov-1 Dec 2011, Newcastle, Australia.

Noor, M. M. and Amiruddin, A. K. and Kadirgama, K. and Sharma, K. V. (2011) The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP). In: 3rd International Conference on Energy and Sustainability , 11-13 Apr 2011, Alicante, Spain.

Shiau, J. S. and Merifield, R. S. and Lyamin, A. V. and Sloan, S. W. (2011) Undrained stability of footings on slopes. International Journal of Geomechanics, 11 (5). pp. 381-390. ISSN 1532-3641

McDougall, Kevin (2011) Using volunteered information to map the Queensland floods. In: 2011 Surveying and Spatial Sciences Conference: Innovation in Action: Working Smarter (SSSC 2011), 21-25 Nov 2011, Wellington, New Zealand.

Lokuge, Weena and Aravinthan, Thiru and Sirimanna, Chamila Sampath and Islam, Mainul (2011) Influence of fly ash proportions on properties of polymer cconcrete with polyester resin. In: Concrete 2011: Building a Sustainable Future, 12-14 Oct 2011, Perth, Western Australia.

Dowling, David G. and Hadgraft, Roger G. (2011) A systematic consultation process to define graduate outcomes for engineering disciplines. In: REES 2011: Research in Engineering Education Symposium, 4-7 Oct 2011, Madrid, Spain.

Najafi, Gholamhassan and Ghobadian, Barat and Yusaf, Talal F. (2011) Algae as a sustainable energy source for biofuel production in Iran: a case study. Renewable and Sustainable Energy Reviews, 15 (8). pp. 3870-3876. ISSN 1364-0321

Dong, Yu and Chaudhary, Deeptangshu and Ploumis, Charlie and Lau, Kin-tak (2011) Correlation of mechanical performance and morphological structures of epoxy micro/nanoparticulate composites. Composites Part A: Applied Science and Manufacturing , 42 (10). pp. 1483-1492. ISSN 1359-835X

Brodie, Lyn and Bullen, Frank and Jolly, Lesley (2011) Effective evaluation strategies to meet global accreditation requirements. In: FIE 2011: Celebrating 41 Years of Monumental Innovations From Around the World , 12-15 Oct 2011, Rapid City, SD. United States.

Craig, Ian and Thorpe, David and Goh, Steven (2011) Environmental sustainability education: towards a minimum service level agreement for delivery to engineering students. In: SSEE 2011: Escaping Silos , 24-26 Oct 2011, Brisbane, Australia.

Jolly, Hannah and Brodie, Lyn and Jolly, Lesley (2011) Evaluating tutor training for online PBL teamwork courses in first year engineering. In: REES 2011: Research in Engineering Education Symposium, 4-7 Oct 2011, Madrid, Spain.

Kist, Alexander A. and Jolly, Hannah and Brodie, Lyn (2011) Quality of experience of online learning tools. In: REES 2011: Research in Engineering Education Symposium, 4-7 Oct 2011, Madrid, Spain.

Wandel, Andrew P. (2011) Team formation by region to improve outcomes for distance-education students in a PBL course. In: FIE 2011: Celebrating 41 Years of Monumental Innovations From Around the World , 12-15 Oct 2011, Rapid City, SD. United States.

Kist, Alexander A. (2011) Trialling an assignment structure that develops generic competencies and enriches subject understanding. In: Engineering education: an Australian perspective. Multi-Science Publishing Co. Ltd., Essex, United Kingdom, pp. 43-51. ISBN 9781907132292

Kist, Alexander A. and Wandel, Andrew P. (2011) Work in progress – performance evaluation of online learning tools. In: FIE 2011: Celebrating 41 Years of Monumental Innovations From Around the World, 12-15 Oct 2011, Rapid City, SD. United States.

Baillie, J. and Brodie, I. (2011) Review of dynamic water allocation systems. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Kist, Alexander A. and Maxwell, Andrew and Gibbings, Peter and Fogarty, Roderick and Midgley, Warren and Noble, Karen (2011) Engineering for primary school children: learning with robots in a remote access laboratory. In: 39th SEFI Annual Conference: Global Engineering Recognition, Sustainability and Mobility (SEFI 2011), 27-30 Sep 2011, Lisbon, Portugal.

Burgess, R. and Ahfock, A. (2011) The use of voltage regulators in power systems with arc-suppression coils. In: AUPEC 2011: Integrating Renewables into the Grid, 25-28 Sep 2011, Brisbane, Australia.

Brodie, Lyn (2011) Delivering key graduate attributes via teams working in virtual space. International Journal of Emerging Technologies in Learning, 6 (3). pp. 5-11. ISSN 1868-8799

Shahid, Salman and Wen, Peng and Ahfock, Tony and Leis, John (2011) Effects of head geometry, coil position and CSF displacement on field distribution under transcranial magnetic stimulation. Journal of Medical Imaging and Health Informatics, 1 (3). pp. 271-277. ISSN 2156-7018

Chen, G. and Schmidt, E. and Symes, T. and Zhao, B. and Cameron, R. (2011) Energy use and development of online energy calculators for the nursery industry. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Chan, Mo-lin and Lau, Kin-tak and Wong, Tsun-tat and Ho, Mei-po and Hui, David (2011) Mechanism of reinforcement in a nanoclay/polymer composite. Composites Part B: Engineering, 42 (6). pp. 1708-1712. ISSN 1359-8368

Helwig, A. and Ahfock, A. (2011) Sizing nickel iron batteries for RAPS systems. In: 2011 IET Renewable Power Generation Conference (RPG 2011) , 6-8 Sep 2011, Edinburgh, UK.

Kist, Alexander A. and Brodie, Lyn (2011) SPIDER – enabling seminar presentations for distance education. In: 39th SEFI Annual Conference: Global Engineering Recognition, Sustainability and Mobility (SEFI 2011), 27-30 Sep 2011, Lisbon, Portugal.

Nawi, Nazmi Mat and Jensen, Troy and Chen, Guangnan and Baillie, Craig (2011) The application of spectroscopic methods to predict sugarcane quality based on stalk cross-sectional scanning. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Singh, Narish and Yousif, B. F. and Rilling, Dirk (2011) Tribological characteristics of sustainable fibre reinforced thermoplastic composites under wet adhesive wear. Tribology Transactions, 54 (5). 736-748. ISSN 1040-2004

Salim, Omar Hazim and Xiang, Wei and Leis, John (2011) Error-resilient video transmission for 3-D signal over cooperative-MIMO system. In: EUSIPCO 2011: 19th European Signal Processing Conference, 29 Aug-2 Sep 2011, Barcelona, Spain.

Malvern, J. L. and Epaarachchi, J. A. and Lau, K. T. (2011) Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions. In: 18th International Conference on Composite Materials (ICCM-18), 21-26 Aug 2011, Jeju Island, South Korea.

Wen, Peng and Li, Yan (2011) Twin rotor system modelling de-coupling and optimal control. In: ICMA 2011: IEEE International Conference on Mechatronics and Automation, 7-10 Aug 2011, Beijing, China.

Yusaf, T. F. and Yousif, B. F. and Elawad, M. M. (2011) Crude palm oil fuel for diesel-engines: experimental and ANN simulation approaches. Energy, 36 (8). 4871-4878. ISSN 0360-5442

Yusaf, T. and Saleh, K. H. and Said, M. A. (2011) Engine performance and emission analysis of LPG-SI engine with the aid of artificial neural network. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 225 (5). pp. 591-600. ISSN 0957-6509

Scarmana, G. (2011) Image reconstruction in the contour domain. In: ISDE 7: 7th International Symposium on Digital Earth , 23-25 Aug 2011, Perth, Australia.

Wang, Hao and Shi, Zhiming (2011) In vitro biodegradation behavior of magnesium and magnesium alloy. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 98B (2). pp. 203-209. ISSN 1552-4973

Lau, Alan K. T. and Ho, Mabel M. P. (2011) Recent research trend in natural-fibre composites. JEC Composites (67). pp. 50-52. ISSN 1639-965X

McDougall, Kevin (2011) Understanding the impact of volunteered geographic information during the Queensland floods. In: ISDE 7: 7th International Symposium on Digital Earth, 23-25 Aug 2011, Perth, Australia.

Shiau, Jim S. (2011) A shakedown limit under Hertz contact pressure. In: 2011 International Conference on Advanced Engineering Materials and Technology (AEMT 2011), 29-31 Jul 2011, Sanya, China.

Hamawand, I. (2011) Effect of colloidal particles associated with the liquid bridge in sticking during drying in superheated steam. International Journal of Engineering, Transactions B: Applications, 24 (2). pp. 119-126. ISSN 1728-144X

Bose, Saswata and Kim, Nam Hoon and Kuila, Tapas and Lau, Kin-tak and Lee, Joong Hee (2011) Electrochemical performance of a graphene–polypyrrole nanocomposite as a supercapacitor electrode. Nanotechnology, 22 (29). p. 5202. ISSN 0957-4484

Nguyen-Ky, Tai and Wen, Peng (Paul) and Li, Yan and Gray, Robert (2011) Measuring and reflecting depth of anesthesia using wavelet and power spectral density. IEEE Transactions on Information Technology in Biomedicine, 15 (4). pp. 630-639. ISSN 1089-7771

Burgess, R. and Ahfock, A. (2011) Minimising the risk of cross-country faults in systems using arc suppression coils. IET Generation, Transmission and Distribution, 5 (7). pp. 703-711. ISSN 1751-8687

Kim, M. T. and Rhee, K. Y. and Lee, J. H. and Hui, D. and Lau, Alan K. T. (2011) Property enhancement of a carbon fiber/epoxy composite by using carbon nanotubes. Composites Part B: Engineering , 42 (5). pp. 1257-1261. ISSN 1359-8368

Wang, Gengkun and Xiang, Wei and Chen, Haoyu and Wen, Peng (2011) Wireless sensor home automation networks based upon Sun SPOT. In: ICSSC 2011: IET International Conference on Smart and Sustainable City (IET ICSSC2011), 6-8 Jul 2011, Shanghai, China.

Campbell, G. (2011) A principles-based approach to cadastral reinstatement for Australian jurisdictions. Journal of Spatial Science, 56 (1). pp. 15-25. ISSN 1449-8596

Mai-Duy, N. and Tran-Cong, T. (2011) Compact local integrated-RBF approximations for second-order elliptic differential problems. Journal of Computational Physics , 230 (12). pp. 4772-4794. ISSN 0021-9991

Peng, Tianshu and Struthers, Craig and Zhe, Jianwu and Liu, Guangming and Shen, Yulin and Sun, Yitong (2011) Sensorless pressure control for special industrial applications. In: ISIA 2010: International Symposium on Information and Automation , 10-11 Nov 2010, Guangzhou, China.

Shahid, Salman and Wen, Peng and Ahfock, Tony (2011) Effect of fat and muscle tissue conductivity on cortical currents - a tDCS study. In: 2011 IEEE/ICME International Conference on Complex Medical Engineering (CME 2011), 22-25 May 2011, Harbin, China.

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2011) The implementation of statistical inference to study the bending strength of sustainable hybrid sandwich panel composite. Advanced Material Research, 250-253. pp. 956-961.

Wang, Jing and Sutti, Alessandra and Wang, Xin and Lin, Tong (2011) Fast responsive and morphologically robust thermo-responsive hydrogel nanofibres from poly(N-isopropylacrylamide) and POSS crosslinker. Soft Matter, 7 (9). pp. 4364-4369. ISSN 1744-683X

Aravinthan, V. and Hoque, M. A. (2011) Development and calibration of bio-kinetic model for surfactant biodegradation with combined respirometric and titrimetric measurements. Bioresource Technology, 102 (9). pp. 5504-5513. ISSN 0960-8524

Le-Cao, K. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2011) Numerical study of stream-function formulation governing flows in multiply-connected domains by integrated RBFs and Cartesian grids. Computers and Fluids , 44 (1). pp. 32-42. ISSN 0045-7930

Strunin, D. V. (2011) Universality of turbulent dispersion in a steady flow in an open channel. Quarterly Journal of Mechanics and Applied Mathematics, 64 (2). pp. 197-214. ISSN 0033-5614

Guades, E. J. and Aravinthan, T. and Islam, M. M. (2011) Driveability of composite piles. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011) , 27-29 Apr 2011, Brisbane, Australia.

Manalo, A. C. and Aravinthan, T. (2011) The effects of fibre wraps on the flexural behaviour of glulam composite sandwich beams. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011), 27-29 Apr 2011, Brisbane, Australia.

Nguyen-Van, H. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2011) Buckling and vibration analysis of laminated composite plate/shell structures via a smoothed quadrilateral flat shell element with in-plane rotations. Computers and Structures, 89 (7-8). pp. 612-625. ISSN 0045-7949

Brodie, Lyn and Bullen, Frank and Gibbings, Peter (2011) Developing an engineering education research culture. In: EDUCON 2011: Learning Environments and Ecosystems in Engineering Education, 4-6 Apr 2011, Amman, Jordan.

Brodie, Lyn (2011) Problem based learning in virtual teams to deliver key graduate attributes. In: EDUCON 2011: Learning Environments and Ecosystems in Engineering Education, 4-6 Apr 2011, Amman, Jordan.

Kist, Alexander A. and Brodie, Lyn (2011) SPIDER activities: select, prepare and investigate, discuss, evaluate, reflect. In: EDUCON 2011: Learning Environments and Ecosystems in Engineering Education, 4-6 Apr 2011, Amman, Jordan.

Wang, Gengkun and Xiang, Wei and Yuan, Jinhong and Huang, Tao (2011) Outage performance of analog network coding in generalized two-way multi-hop networks. In: IEEE Wireless Communications and Networking Conference (WCNC 2011) , 28-31 Mar 2011, Cancun, Mexico.

El Saliby, Ibrahim and Erdei, Laszlo and Shon, Ho Kyong and Kim, Jong-Ho (2011) Development of visible light sensitive titania photocatalysts by combined nitrogen and silver doping. Journal of Industrial and Engineering Chemistry, 17 (2). pp. 358-363. ISSN 1226-086X

Shahid, S. and Ball, J. A. R. and Wells, C. G. and Wen, P. (2011) Reflection type Q-factor measurement using standard least squares methods. IET Microwaves, Antennas and Propogation, 5 (4). pp. 426-432. ISSN 1751-8725

Ho, Mei-Po and Lau, Kin-Tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

Ku, H. and Maxwell, A. and Wong, P. and Huang, J. and Fung, H. (2011) Relationship between electrical and mechanical loss tangents of hollow glass powder reinforced epoxy composites: a pilot study. Journal of Applied Polymer Science , 119 (5). pp. 2945-2952. ISSN 0021-8995

Banerjee, S. and Bhattacharyya, D. (2011) Optimal design of sandwich panels made of wood veneer hollow cores. Composites Science and Technology, 71 (4). pp. 425-432. ISSN 0266-3538

Singh, N. and Yousif, B. F. and Rilling, D. (2011) Adhesive wear of thermoplastic composite based on kenaf fibres. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225 (2). pp. 101-109. ISSN 1350-6501

Yousif, B. F. and Yeh, Kok Soon (2011) Badminton training machine with impact mechanism. Journal of Engineering Science and Technology, 6 (1). pp. 61-68. ISSN 1823-4690

Shiau, J. S. and Smith, C. A. (2011) Calculation of lateral earth pressures with layered backfill. In: Continuum and Distinct Element Numerical Modeling in Geomechanics, 14-16 Feb 2011, Melbourne, Australia.

Awad, Ziad K. and Yusaf, Talal F. (2011) Finite element analysis of fibre reinforce concrete beam subject to high temperature by using EURO-code models. Key Engineering Materials, 471-47. pp. 343-348. ISSN 1013-9826

Shiau, J. S. and Hobson, M. A. (2011) Modeling uplift of plate anchor. In: Continuum and Distinct Element Numerical Modeling in Geomechanics, 14-16 Feb 2011, Melbourne, Australia.

Sirimanna, Chamila Sampath and Islam, Md Mainul and Aravinthan, Thiru (2011) Polymer based filler materials as infill for GFRP pile connector. Key Engineering Materials, 471-47. pp. 763-768. ISSN 1013-9826

Buttsworth, David R. and Agrira, Abdalla and Malpress, Ray and Yusaf, Talal (2011) Simulation of instantaneous heat transfer in spark ignition internal combustion engines: unsteady thermal boundary layer modeling. Journal of Engineering for Gas Turbines and Power , 133 (2). pp. 1-5. ISSN 0742-4795

Banerjee, Sourish (2011) Creep response of polymeric honeycombs. In: 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX) , 14-17 Jan 2011, Auckland, New Zealand.

Xia, Zhigang and Wang, Hongshan and Wang, Xin and Ye, Wenxiang and Xu, Weilin (2011) A study on the relationship between irregularity and hairiness of spun yarns. Textile Research Journal, 81 (3). pp. 273-279. ISSN 0040-5175

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2011) Free vibration analysis of laminated composite plates based on FSDT using one-dimensional IRBFN method. Computers and Structures, 89 (1-2). pp. 1-13. ISSN 0045-7949

Ahfock, A. and Gambetta, D. (2011) Stator eddy-current losses in printed circuit brushless motors. IET Electric Power Applications , 5 (1). pp. 159-167. ISSN 1751-8660

Shiau, Jim S. and Hobson, Michael A. (2011) Teaching earth pressure theory using physical models: an example in civil engineering. In: International Engineering and Technology Education Conference 2011 (IETEC 2011) , 16-19 Jan 2011, Kuala Lumpur, Malaysia.

Chong, Albert and Milburn, Peter and Newsham-West, Richard (2011) 3D dynamic surface modelling of the foot and leg. Footwear Science, 3 (s1). pp. 35-37. ISSN 1942-4280

An-Vo, D. A. and Mai-Duy, N. and Tran-Cong, T. (2011) A C2-continuous control-volume technique based on cartesian grids and two-node integrated-RBF elements for second-order elliptic problems. CMES: Computer Modeling in Engineering and Sciences, 72 (4). pp. 299-334. ISSN 1526-1492

Mai-Duy, N. and Tran-Cong, T. and Phan-Thien, N. (2011) A numerical technique based on integrated RBFs for the system evolution in molecular dynamics. CMES: Computer Modeling in Engineering and Sciences, 79 (4). pp. 223-236. ISSN 1526-1492

Mai-Duy, N. and Tran-Cong, T. (2011) A stable and accurate control-volume technique based on integrated radial basis function networks for fluid-flow problems. In: ACAM 6: 6th Australasian Congress on Applied Mechanics , 12-15 Dec 2010, Perth, Western Australia.

Tran, C. -D. and An-Vo, D. -A. and Mai-Duy, N. and Tran-Cong, T. (2011) An integrated RBFN-based macro-micro multi-scale method for computation of visco-elastic fluid flows. CMES: Computer Modeling in Engineering and Sciences, 82 (2). pp. 137-162. ISSN 1526-1492

Zhuge, Y. and Yeap, K. X. (2011) Assessment of debonding failure models for FRP retrofitted URM structures. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials , 7-10 Dec 2010, Melbourne, Australia.

Hoque, M. A. and Aravinthan, V. and Pradhan, N. M. and Sakhiya, A. (2011) Combined titrimetric respirometer as a real-time sensor to monitor the aerobic biodegradation process of different substrates. Journal of Applied Sciences, 11 (13). pp. 2299-2305. ISSN 1812-5654

Mai-Duy, Nam and Tran-Cong, Thanh (2011) Compact local approximations employed with integrated RBFs for second-order elliptic differential equations. In: 3rd International Symposium on Computational Mechanics (ISCM III) and 2nd Symposium on Computational Structural Engineering (CSE II), 5-7 Dec 2011, Taipei, Taiwan.

Hoang-Trieu, T.-T. and Mai-Duy, N. and Tran-Cong, T. (2011) Compact local stencils employed with integrated RBFs for fourth-order differential problems. Structural Longevity, 6 (2). pp. 93-107. ISSN 1944-611X

Thai-Quang, N. and Le-Cao, K. and Mai-Duy, N. and Tran-Cong, T. (2011) Discretisation of the velocity-pressure formulation with integrated radial-basis-function networks. Structural Longevity, 6 (2). pp. 77-91. ISSN 1944-611X

Kabir, M. M. and Wang, H. and Cardona, F. and Aravinthan, T. (2011) Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Ho, M. P. and Lau, K. T. and Wang, H. (2011) Effect of degumming on tussah silk fibre. In: 18th International Conference on Composite Materials (ICCM 2011): Composite Materials: Key to the Future, 21-26 Aug 2011, Jeju, Korea.

Zhang, Z. and Wang, H. and Reid, A. and Aravinthan, T. (2011) Effects of fly ash source and curing procedure on strength development of geopolymers. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Alajel, Khalid Mohamed and Xiang, Wei and Leis, John (2011) Face detection based on skin color modeling and modified Hausdorff distance. In: CCNC 2011: Emerging and Innovative Consumer Technologies and Applications, 9-12 Jan 2011, Las Vegas, NV. USA.

An-Vo, D. A. and Mai-Duy, N. and Tran-Cong, T. (2011) High-order upwind methods based on C2-continuous two-node integrated-RBF elements for viscous flows. CMES: Computer Modeling in Engineering and Sciences, 80 (2). pp. 141-177. ISSN 1526-1492

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. (2011) Identification of distortions to FBG spectrum using FBG fixed filters. In: 18th International Conference on Composite Materials (ICCM 2011): Composite Materials: Key to the Future, 21-26 Aug 2011, Jeju, Korea.

Khan, Razmi and Eichmann, Troy and Buttsworth, David and Upcroft, Ben (2011) Image-based visual servoing for the super-orbital re-entry of Hayabusa spacecraft. In: 2011 Australasian Conference on Robotics and Automation (ACRA 2011) , 7-9 Dec 2011, Melbourne, Australia.

Singh, Narish and Yousif, B. F. and Rilling, Dirk (2011) Investigations on wear and frictional properties of kenaf fibre polyurethane composites under dry and wet contact conditions. International Journal of Precision Technology, 2 (4). pp. 375-387. ISSN 1755-2060

An-Vo, D.-A. and Tran, C.-D. and Mai-Duy, N. and Tran-Cong, T. (2011) IRBFN-based multiscale solution of a model 1D elliptic equation. In: 33rd International Conference on Boundary Elements and other Mesh Reduction Methods (BEM/MRM 2011), 28-30 Jun 2011, New Forest, United Kingdom.

Zhuge, Y. and Mills, J. (2011) Modelling of multi-panel transmission tower retrofitted with leg reinforcement. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Kist, Alexander A. (2011) Modelling of staged routing for reduced carbon footprints of large server clusters. International Journal of Communication Networks and Distributed Systems, 6 (1). pp. 28-44. ISSN 1754-3916

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2011) Moving least square - one dimensional integrated radial basis function networks for time dependent problems. In: 33rd International Conference on Boundary Elements and other Mesh Reduction Methods, 28-30 Jun 2011, New Forest, UK.

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2011) Multi-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applications. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Hua, Fuan and Zhang, Chaoyi and Li, Qiang and Yu, Baoyi and Liu, Weihua and Li, Runxia and Xie, Shuisheng and Huang, Guojie and Cheng, Lei and Fu, Yao and Wang, Hao (2011) Numerical simulation of rolling process and microstructure evolution of AM50 Mg alloy during hot rolling process. In: International Conference on Advanced Engineering Materials and Technology (AEMT 2011), 29-31 Jul 2011, Sanya, China.

Lokuge, W. P. and Setunge, S. and Sanjayan, J. G. (2011) Stress-strain model for high strength concrete confined by FRP. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Jensen, T. A. and Zeller, L. C. and Apan, A. A. (2011) The use of an unmanned aerial vehicle as a remote sensing platform in agriculture. Australian Journal of Multi-Disciplinary Engineering, 8 (2). pp. 139-146. ISSN 1448-8388

Goh, Steven C. and Wang, Hao, eds. (2010) Proceedings of the 2010 Southern Region Engineering Conference (SREC 2010). Engineers Australia, Toowoomba, Australia.

Malpress, Ray and Buttsworth, David (2010) Assessment of an eccentric link in the connecting rod of a spark ignition engine intended for variable compression ratio operation. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Western Australia.

Burgess, R. and Ahfock, A. (2010) The use of arc-suppression coils in power systems with open-delta regulators. In: AUPEC 2010: Power Quality for the 21st Century, 5-8 Dec 2010, Christchurch, New Zealand.

Saleh, Khalid and Buttsworth, David and Yusaf, Talal (2010) Development of a small icing wind tunnel for simulating the initial stages of solid phase ice accretion. In: 17th Australasian Fluid Mechanics Conference (AFMC 2010), 5-9 Dec 2010, Auckland, New Zealand.

Deo, Ravinesh C. and Nathan, Graham J. and Mi, Jianchun (2010) On the influence of initial conditions on a turbulent plane jet: the role of nozzle exit area. In: 17th Australasian Fluid Mechanics Conference (AFMC 2010), 5-9 Dec 2010, Auckland, New Zealand.

Widodo, A. S. and Buttsworth, D. R. (2010) Stagnation temperature measurements in the USQ hypersonic wind tunnel. In: 17th Australasian Fluid Mechanics Conference (AFMC 2010), 5-9 Dec 2010, Auckland, New Zealand.

Kist, Alexander A. (2010) Building blocks for flexible and engaging learning environments. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Cardona, F. and Ku, H. and Chouzenoux, L. (2010) Effect of tannin on flexural properties of phenol formaldehyde glycerol reinforced composites: preliminary results. Journal of Reinforced Plastics and Composites, 29 (24). pp. 3543-3553. ISSN 0731-6844

Aravinthan, T. and Heldt, T. (2010) Innovative strengthening technique using post-tensioned fibre composite wraps for bridge headstocks. Australian Journal of Structural Engineering, 11 (2). pp. 117-128. ISSN 1328-7982

Zhao, Yong-Qing and Lau, Kin-Tak and Kim, Jang-Kyo and Xu, Cai-Ling and Zhao, Dan-Dan and Li, Hu-Lin (2010) Nanodiamond/poly (lactic acid) nanocomposites: effect of nanodiamond on structure and properties of poly (lactic acid). Composites Part B: Engineering, 41 (8). pp. 646-653. ISSN 1359-8368

Yousif, B. F. and El-Tayeb, N. S. M. (2010) Wear characteristics of thermoset composite under high stress three-body abrasive. Tribology International, 43 (12). pp. 2365-2371. ISSN 0301-679X

Bose, Saswata and Kuila, Tapas and Uddin, Md. Elias and Kim, Nam Hoon and Lau, Alan K. T. and Lee, Joong Hee (2010) In-situ synthesis and characterization of electrically conductive polypyrrole/graphene nanocomposites. Polymer, 51 (25). pp. 5921-5928. ISSN 0032-3861

Allwayzy, S. H. and Yusaf, T. and McCabe, B. and Pittaway, P. and Aravinthan, V. (2010) Microalgae as alternative fuel for compression ignition (CI) Engines. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Malpress, Ray and Buttsworth, David (2010) Internal combustion engines: a role to fill for transport in an energy conscious environment. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2010) A numerical study of 2D integrated RBFNs incorporating Cartesian grids for solving 2D elliptic differential problems. Numerical Methods for Partial Differential Equations, 26 (6). pp. 1443-1462. ISSN 0749-159X

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2010) A review of current development in natural fiber composites for structural and infrastructure applications. In: Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

Sharifian, Ahmad and Buttsworth, David (2010) Double-layered metal mesh screens to contain or exclude thermal radiation from bush fires. Journal of Fire Protection Engineering, 20 (4). pp. 291-311. ISSN 1042-3915

Aldraho, Abdelnour and Kist, Alexander A. (2010) Enhanced heuristics to reduce power consumption of networks using weight setting. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Zhuge, Y. (2010) FRP-retrofitted URM walls under in-plane shear: review and assessment of available models. Journal of Composites for Construction, 14 (6). pp. 743-753. ISSN 1090-0268

Aldraho, Abdelnour and Kist, Alexander A. (2010) Heuristics for dynamic topologies to reduce power consumption of networks. In: ATNAC 2010: Australasian Telecommunication Networks and Applications Conference, 31 Oct-3 Nov 2010, Auckland, New Zealand.

Wang, Hao (2010) Sustainable materials research at USQ. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Aravinthan, Thiru (2010) The developments of structural health/integrity monitoring systems using FBG sensors at CEEFC of USQ. In: Southern Region Engineering Conference (SREC 2010) , 11-12 Nov 2010, Toowoomba, Australia.

Chin, C. W. and Yousif, B. F. (2010) Tribological behaviour of KFRE composite. International Journal of Modern Physics B, 24 (28). pp. 5589-5599. ISSN 0217-9792

Banerjee, S. and Battley, M. and Bhattacharyya, D. (2010) Shear strength optimization of reinforced honeycomb core materials. Mechanics of Advanced Materials and Structures, 17 (7). pp. 542-552. ISSN 1537-6494

Tran, Canh-Dung and Smith, Shaun M. and Higgerson, G. and Bui, Anh and Randeniya, Lakshman K. and Tran-Cong, Thanh (2010) Spinning CNT based composite yarns using a dry spinning process. In: International Conference on Nanoscience and Nanotechnology (ICONN 2010), 22-26 Feb 2010, Sydney, Australia.

Naebe, Minoo and Wang, Jing and Xue, Yuhua and Wang, Xungai and Lin, Tong (2010) Carbon nanotube reinforced rigid-rod polyimide. Journal of Applied Polymer Science, 118 (1). pp. 359-365. ISSN 0021-8995

Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275

Smith, R. J. and Gillies, M. H. (2010) Head ditch hydraulics and the variability of inflows to irrigation furrows. Irrigation and Drainage, 59 (4). pp. 442-452. ISSN 1531-0353

Bullen, Frank and Gibbings, Peter and Brodie, Lyn (2010) Leading engineering learning and teaching in Australia. In: 40th ASEE/IEEE Frontiers in Education Conference (FIE 2010): Celebrating 40 Years of Innovation , 27-30 Oct 2010, Washington, DC. United States.

Boh, Tjasa and Billingsley, John and Bradbeer, Robin S. and Hodgson, Paul (2010) Terramechanics based traction control of underwater wheeled robot. In: OCEANS 2010: Showcasing Advances in Marine Science and Engineering, 24-27 May 2010, Sydney, Australia.

Yousif, B. F. and Nirmal, Umar and Wong, K. J. (2010) Three-body abrasion on wear and frictional performance of treated betelnut fibre reinforced epoxy (T-BFRE) composite. Materials and Design, 31 (9). pp. 4514-4521. ISSN 0264-1275; 0261-3069

Aravinthan, Thiru (2010) Challenges in the design and delivery of an online postgraduate course in fibre composites. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

Chong, Albert K. and Ariff, M. Farid M. and Setan, Halim and Majid, Zulkepli (2010) Night-time surveillance system for forensic 3D mapping. In: CISP 2010: 3rd International Congress on Image and Signal Processing , 16-18 Oct 2010, Yantai, China.

Ghabraie, Kazem and Chan, Ricky and Huang, Xiaodong and Xie, Yi Min (2010) Shape optimization of metallic yielding devices for passive mitigation of seismic energy. Engineering Structures, 32 (8). pp. 2258-2267. ISSN 0141-0296

Siuly, and Li, Y. and Wen, P. (2010) Analysis and classification of EEG signals using a hybrid clustering technique. In: 2010 IEEE/ICME International Conference on Complex Medical Engineering (CME 2010), 13-15 July 2010, Gold Coast, Australia.

Nguyen-Ky, T. and Wen, Peng and Li, Yan and Gray, Robert (2010) De-noising a raw EEG signal and measuring depth of anaesthesia for general anaesthesia patients. In: 2010 IEEE/ICME International Conference on Complex Medical Engineering (CME 2010), 13-15 July 2010, Gold Coast, Australia.

Anna, Shahab and Wen, Peng (2010) Depth of anesthesia control using internal model control techniques. In: IEEE/ICME International Conference on Complex Medical Engineering (CME 2010), 13-15 Jul 2010, Gold Coast, Australia.

Shahid, Salman and Wen, Peng (2010) Analytic and numeric evaluation of EEG forward problem using spherical volume conductor models. In: 2010 IEEE/ICME International Conference on Complex Medical Engineering (CME 2010), 13-15 July 2010, Gold Coast, Australia.

Ning, Z. L. and Wang, H. and Sun, J. F. (2010) Deformation behavior of semisolid A356 alloy prepared by low temperature pouring. Materials and Manufacturing Processes, 25 (7). pp. 648-653. ISSN 1042-6914

Ahfock, A. and Gambetta, D. (2010) Sensorless commutation of printed circuit brushless direct current motors. IET Electric Power Applications, 4 (6). pp. 397-406. ISSN 1751-8660

Yousif, B. F. and Alsofyani, I. M. and Yusaf, Talal (2010) Adhesive wear and frictional characteristics of UHMWPE and HDPE sliding against different counterfaces under dry contact condition. Tribology, 4 (2). pp. 78-85. ISSN 1751-5831

Rao, Sanjeev and Banerjee, Sourish and Jayaraman, Krishnan and Bhattacharyya, Debes (2010) Compressive behavior of fibre reinforced honeycomb cores. In: 2008 IUTAM Symposium on Multi-Functional Material Structures and Systems, 10-12 Dec 2008, Bangalore, India.

Kittipoomwong, Prakorn and See, Howard and Mai-Duy, Nam (2010) Dynamic simulation of non-spherical particulate suspensions. Rheologica Acta, 49 (6). pp. 597-606. ISSN 0035-4511

Gibbings, Peter and Lidstone, John and Bruce, Christine (2010) How do student attributes influence the way students experience problem-based learning in virtual space? Australasian Journal of Engineering Education, 16 (1). pp. 69-80. ISSN 1324-5821

Ku, H. and Goh, S. (2010) Final year engineering projects in Australia and Europe. European Journal of Engineering Education, 35 (2). pp. 161-173. ISSN 0304-3797

Jensen, T. and Baillie, C. and Bramley, R. and Di Bella, L. and Whiteing, C. and Davis, R. (2010) Assessment of sugarcane yield monitoring technology for precision agriculture. In: 32nd Annual Conference of the Australian Society of Sugar Cane Technologists, 11-14 May 2010, Bundaberg, Australia.

Li, Qiang and Yu, Baoyi and Zhang, Huawen and Li, Runxia and Wang, Feng and Xie, Shuisheng and Huang, Guojie and Wang, Hao (2010) Cellular automaton modeling of semisolid microstructure formation. China Foundry, 7 (2). pp. 143-148. ISSN 1672-6421

Yusaf, Talal F. and Buttsworth, D. R. and Saleh, Khalid H. and Yousif, B. F. (2010) CNG-diesel engine performance and exhaust emission analysis with the aid of artificial neural network. Applied Energy, 87 (5). pp. 1661-1669. ISSN 0306-2619

Nirmal, Umar and Yousif, B. F. and Rilling, Dirk and Brevern, P. V. (2010) Effect of betelnut fibres treatment and contact conditions on adhesive wear and frictional performance of polyester composites. Wear, 268 (11-12). pp. 1354-1370. ISSN 0043-1648

Ghabraie, Kazem and Xie, Yi Min and Huang, Xiaodong and Ren, Gang (2010) Shape and reinforcement optimization of underground tunnels. Journal of Computational Science and Technology, 4 (1). pp. 51-63.

Lau, Sindy Mei-Ling and Lau, Kin-Tak and Yin, Yan-Sheng and Li, Lan and Wong, May and Chan, Kevin and Chen, William (2010) A shape memory alloy energy absorber for backpack design. Materials and Manufacturing Processes, 25 (4). pp. 281-286. ISSN 1042-6914

Le, Phong B. H. and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2010) A cartesian-grid collocation technique with integrated radial basis functions for mixed boundary value problems. International Journal for Numerical Methods in Engineering, 82 (4). pp. 435-463. ISSN 0029-5981

Karki, Sudarshan and McDougall, Kevin and Thompson, Rod (2010) An overview of 3d cadastre from a physical land parcel and a legal property object perspective. In: XXIV FIG International Congress 2010 (International Federation of Surveyors), 11-16 April 2010, Sydney, Australia.

Ku, H. and Trada, M. and Nixon, R. and Wong, P. (2010) Flexural properties of phenolic resin reinforced with glass powder: preliminary results. Journal of Applied Polymer Science, 116 (1). pp. 347-354. ISSN 0021-8995

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

Park, Ok-kyung and Kim, Nam Hoon and Lau, Kin-Tak and Lee, Joong Hee (2010) Effect of surface treatment with potassium persulfate on dispersion stability of multi-walled carbon nanotubes. Materials Letters, 64 (6). pp. 718-721. ISSN 0167-577X

Mai-Duy, Nam and Tran-Cong, Thanh (2010) A control volume technique based on integrated RBFNs for the convection-diffusion equation. Numerical Methods for Partial Differential Equations, 26 (2). 426 -447. ISSN 0749-159X

Epaarachchi, J. and Ku, H. and Gohel, K. (2010) A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites. Journal of Composite Materials, 44 (6). pp. 779-788. ISSN 0021-9983

Lau, Kin-tak and Ho, Mei-po and Au-Yeung, Chi-ting and Cheung, Hoi-yan (2010) Biocomposites: their multifunctionality. International Journal of Smart and Nano Materials, 1 (1). pp. 13-27. ISSN 1947-5411

Dahmani, L. and Khennane, A. and Kaci, S. (2010) Crack identification in reinforced concrete beams using ANSYS software. Strength of Materials, 42 (2). pp. 232-240. ISSN 0039-2316

Erdei, Laszlo and Vigneswaran, Saravanamuthu and Kandasamy, Jaya K. (2010) Modelling of submerged membrane flocculation hybrid systems using statistical and artificial neural networks methods. Journal of Water Supply: Research and Technology, 59 (2-3). pp. 198-208. ISSN 1606-9935

Ku, H. and Kota, V. and Trada, M. (2010) Optimum percentage of fly ash reinforcement in vinyl ester composites. Journal of Materials in Civil Engineering, 22 (1). pp. 104-107. ISSN 0899-1561

Ji, Xiaoyong and Li, Hui and Hui, David and Hsiao, Kuang-Ting and Ou, Jinping and Lau, Alan K. T. (2010) I-V characteristics and electro-mechanical response of different carbon black/epoxy composites. Composites Part B: Engineering, 41 (1). pp. 25-32. ISSN 1359-8368

Yousif, B. F. and Lau, Saijod T. W. and McWilliam, S. (2010) Polyester composite based on betelnut fibre for tribological applications. Tribology International, 43 (1-2). pp. 503-511. ISSN 0301-679X

Ho-Minh, D. and Mai-Duy, N. and Tran-Cong, T. (2010) A Cartesian-grid integrated-RBF Galerkin technique. In: Recent studies in meshless and other novel computational methods. Tech Science Press, Duluth, GA. USA, pp. 87-102. ISBN 978-0-9824205-4-6

Ho-Minh, D. and Mai-Duy, Nam and Tran-Cong, Thanh (2010) A cartesian-grid integrated-RBF method for viscoelastic flows. In: 9th World Congress on Computational Mechanics and 4th Asian-Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), 19-23 July 2010, Sydney, Australia.

Su, Ying and Huang, Jinghua and Al-Hakim, Latif (2010) A methodology to assure measurement data quality for key engineering materials. Advanced Materials Research, 108-11 (1). pp. 972-978. ISSN 1022-6680

Le, Phong B. H. and Rabczuk, Timon and Mai-Duy, Nam and Tran-Cong, Thanh (2010) A moving IRBFN-based Galerkin meshless method. CMES: Computer Modeling in Engineering and Sciences, 66 (1). pp. 25-52. ISSN 1526-1492

Le, Phong B. H. and Rabczuk, Timon and Mai-Duy, Nam and Tran-Cong, Thanh (2010) A moving IRBFN-based integration-free meshless method. CMES: Computer Modeling in Engineering and Sciences, 61 (1). pp. 63-109. ISSN 1526-1492

Le-Cao, K. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2010) A new integrated-rbf-based domain-embedding scheme for solving fluid-flow problems. In: 9th World Congress on Computational Mechanics and 4th Asian-Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), 19-23 July 2010, Sydney, Australia.

Mai-Duy, N. and Tran-Cong, T. (2010) A numerical scheme based on local integrated RBFNs and Cartesian grids for solving second-order elliptic problems in two dimensions. In: Recent studies in meshless and other novel computational methods. Tech Science Press, Duluth, GA. United States, pp. 17-33. ISBN 978-0-9824205-4-6

Mai-Duy, Nam and Tran-Cong, Thanh (2010) A simple and effective preconditioner for integrated-RBF-based Cartesian-grid schemes. In: 2010 International Conference on Computational and Experimental Engineering & Sciences 2010, 28 Mar - 1 Apr 2010, Las Vegas, USA.

Mai-Duy, Nam and Tran-Cong, Thanh (2010) An upwind control-volume method based on integrated RBFs for fluid-flow problems. In: 9th World Congress on Computational Mechanics and 4th Asian-Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), 19-23 July 2010, Sydney, Australia.

Buttsworth, David R. and Smart, Michael K. (2010) Development of a Ludwieg tube with free piston compression heating for scramjet inlet starting experiments. In: 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition (AIAA 2010), 4-7 Jan 2010, Orlando, FL. USA.

Alajel, Khalid Mohamed and Xiang, Wei and Leis, John (2010) Error resilience performance evaluation of H.264 I-frame and JPWL for wireless image transmission. In: ICSPCS 2010: 4th International Conference on Signal Processing and Communication Systems, 13-15 Dec 2010, Gold Coast, Australia.

Billingsley, John (2010) Essentials of control techniques and theory. Taylor & Francis (CRC Press), Boca Raton, FL. USA. ISBN 9781420091236

Buttsworth, David and D'Souza, Mary and Potter, Daniel and Eichmann, Troy and Mudford, Neil and McGilvray, Matthew and McIntyre, Timothy J. and Jacobs, Peter and Morgan, Richard (2010) Expansion tunnel radiation experiments to support Hayabusa re-entry observations. In: 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition (AIAA 2010), 4-7 Jan 2010, Orlando, FL, USA.

Ho-Minh, D. and Mai-Duy, Nam and Tran-Cong, Thanh (2010) Galerkin/collocation methods based on 1D-integrated-RBFNs for viscoelastic flows. CMES: Computer Modeling in Engineering and Sciences, 70 (3). pp. 217-251. ISSN 1526-1492

Li, Sumei and Xiang, Wei and Cheng, Fuwei and Zhao, Ruichao and Hou, Chunping (2010) HVS-based quality assessment metrics for 3-D images. In: 2nd WRI Global Congress on Intelligent Systems (GCIS 2010) , 16-17 Dec 2010, Wuhan, China.

Xiang, Wei and Russell, Julian and Wang, Yafeng (2010) ICI reduction through shaped OFDM in coded MIMO-OFDM systems. International Journal on Advances in Telecommunications, 3 (3&4). pp. 311-323. ISSN 1942-2601

Ngo-Cong, Duc and Mai-Duy, Nam and Karunasena, W. and Tran-Cong, Thanh (2010) Integrated-RBF network method for free vibration analysis of laminated composite plates. In: 9th World Congress on Computational Mechanics and 4th Asian-Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), 19-23 July 2010, Sydney, Australia.

Zhuge, Yan (2010) Investigation of the effect of various additives on the strength of environmentally friendly permeable concrete. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Al-Haddad, A. A. and Salih, Nbhan D. and Wen, Chin Chee and Yusaf, T. F. and Yousif, B. F. (2010) New technique measuring film thickness for tribological machines. In: ASME 2009: International Mechanical Engineering Congress and Exposition, 13-19 Nov 2009, Lake Buena Vista, FL. USA.

Chai, Adrian Ngu Ming and Ibrahim, M. and Chuan, Cheah Bin and Yousif, B. F. (2010) On the development of solar drying system. In: ASME International Mechanical Engineering Congress and Exposition (IMECE 2009), 13-19 Nov 2009, Florida, United States.

Alajel, Khalid Mohamed and Xiang, Wei and Leis, John (2010) Performance analysis of error resilience wireless image transmission using H.264/AVC I-frame. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Ho-Minh, D. and Le-Cao, K. and Mai-Duy, N. and Tran-Cong, T. (2010) Simulation of fluid flows at high Reynolds/Rayleigh numbers using integrated radial basis functions. In: 17th Australasian Fluid Mechanics Conference (AFMC 2010), 5-9 Dec 2010, Auckland, New Zealand.

An-Vo, D.-A. and Mai-Duy, N. and Tran-Cong, T. (2010) Simulation of Newtonian-fluid flows with C2-continuous two-node integrated-RBF elements. Structural Longevity, 4 (1). pp. 39-45. ISSN 1944-611X

Wandel, Andrew P. (2010) Student usage of videos containing worked solutions. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Ku, H. and Trada, M. and Cecil, T. and Wong, P. (2010) Tensile tests of phenol formaldehyde glass-powder-reinforced composites: pilot study. Journal of Applied Polymer Science, 116 (1). pp. 10-17. ISSN 0021-8995

Nirmal, Umar and Jamil, Nadia and Yousif, B. F. and Rilling, Dirk and Brevern, P. V. (2010) The potential of using treated betelnut fibres as reinforcement for tribo-bio polymeric composites subjected to dry/wet contact conditions. In: ICNP 2010: Macro to Nano Scales, 24-26 Sep 2010, Kottayam, India.

Le-Cao, K. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2010) Towards an analysis of shear suspension flows using radial basis functions. CMES: Computer Modeling in Engineering and Sciences, 67 (3). pp. 265-294. ISSN 1526-1492

Xiang, Wei and Clemence, Andrew and Leis, John and Wang, Yafeng (2009) Error resilience analysis of wireless image transmission using JPEG, JPEG 2000 and JPWL. In: ICICS 2009: 7th International Conference on Information, Communications and Signal Processing, 8-10 Dec 2009, Macau, China.

Said, Mior Azman and Buttsworth, David R. and Yusaf, Talal (2009) A review of radiation heat transfer measurement for diesel engines using the two-colour method. In: 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability (ICEE 2009) , 7-8 Dec 2009, Malacca, Malaysia.

Widodo, A. and Buttsworth, D. (2009) Deduction of temperature fluctuations in transient compression wind tunnels using incompressible turbulent flow data. In: 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability (ICEE 2009), 7-8 Dec 2009, Malacca, Malaysia.

Xiang, Wei and Zhu, Ce and Siew, Chee Kheong and Xu, Yuanyuan and Liu, Minglei (2009) Forward error correction-based 2-D layered multiple description coding for error-resilient H.264 SVC video transmission. IEEE Transactions on Circuits and Systems for Video Technology, 19 (12). pp. 1730-1738. ISSN 1051-8215

Agrira, Abdalla and Buttsworth, David R. and Yusaf, Talal (2009) Instantaneous heat flux simulation of S.I. engines: comparison of unsteady thermal boundary layer modelling with experimental data. In: 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability (ICEE 2009), 7-8 Dec 2009, Malacca, Malaysia.

Najafi, G. and Yusaf, T. F. and Ghobadian, B. and Najmeddin, V. R. and Yousif, B. F. (2009) Performance and exhaust emission of a SI engine fuelled with potato waste ethanol and its blends with gasoline. International Energy Journal, 10 (4). pp. 215-226. ISSN 1513-718X

Kist, Alexander A. (2009) Staged request routing for reduced carbon footprints of large scale server systems. In: ATNAC 2009: Australasian Telecommunication Networks and Applications Conference, 9-11 Nov 2009, Canberra, Australia.

Cardona, F. and Rogers, D. and Gurney, R. and Trada, M. and Ku, H. (2009) Flexural tests of phenol formaldehyde and SLG composites: pilot study. Journal of Reinforced Plastics and Composites, 28 (22). pp. 2761-2769. ISSN 0731-6844

Ku, Harry Siu-Lung and Cardona, Francisco and Trada, Mohar and Vigier, Gurlaume (2009) Flexural properties of sawdust reinforced phenolic composites: pilot study. Journal of Applied Polymer Science, 114 (3). pp. 1927-1934. ISSN 0021-8995

Hasna, Abdallah M. (2009) Chemical engineering industry transition towards sustainability. In: SSEE 2009: Solutions for a Sustainable Planet, 22-24 Nov 2009, Melbourne, Australia.

Mi, Jianchun and Feng, Baoping and Deo, Ravinesh C. and Nathan, Graham J. (2009) Effect of exit Reynolds number on self-preservation of a plane jet. Acta Physica Sinica, 58 (11). pp. 7756-7764. ISSN 1000-3290

Ku, Harry S. and Trada, Mohan and Zong, Xuejin and Wong, Peter (2009) Flexural properties of phenolic resin reinforced with glass powder. In: ICAST 2009: 20th International Conference on Adaptive Structures and Technologies , 20-22 Oct 2009, Shatin, Hong Kong.

Trada, Mohan and Ku, Harry and Vedhar, Jayant (2009) Flexural strength of phenol formaldehyde composites post-cured in microwaves: preliminary results. Multi-Functional Materials and Structures II. pp. 1399-1402. ISSN 1022-6680

Mai-Duy, Nam and Ho-Minh, D. and Tran-Cong, Thanh (2009) A Galerkin approach incorporating integrated radial basis function networks for the solution of 2D biharmonic equations. International Journal of Computer Mathematics, 86 (10-11). pp. 1746-1759. ISSN 0020-7160

Taylor, Benjamin Allan (2009) Improving accuracy of rainwater tank hydrologic yield estimation across Queensland. [USQ Project] (Unpublished)

McMahon, Craig Andrew (2009) Investigation of the quality of water treated by magnetic fields. [USQ Project] (Unpublished)

Taylor, Alan Owen (2009) Investigation on the fatigue behaviour of pultruded fibre composites. [USQ Project] (Unpublished)

Taylor, Oliver John (2009) Market segmentation for improved efficiency of Ipswich water supply system. [USQ Project] (Unpublished)

Billingsley, John (2009) Automation and the farmer. In: SEAg 2009: Agricultural Technology in a Changing Climate, 13-16 Sept 2009, Brisbane, Australia.

Gambetta, D. and Ahfock, A. (2009) Designing printed circuit stators for brushless permanent magnet motors. IET Electric Power Applications, 3 (5). pp. 482-490. ISSN 1751-8660

Rashidi, M. and Bahri, M. H. and Khabbaz, B. G. (2009) Effects of coating methods and storage periods on some quality characteristics of carrot during ambient storage. In: SEAg 2009: Agricultural Technologies In a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Mohammad Zamani, D. and Rashidi, M. and Khabbaz, B. G. (2009) Generation digital management map for herbicide application in VRA spraying by using GPS. In: SEAg 2009: Agricultural Technology in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Genet, Martin and Yan, Wenyi and Tran-Cong, Thanh (2009) Investigation of a hydraulic impact: a technology in rock breaking. Archive of Applied Mechanics, 79 (9). pp. 825-841. ISSN 0939-1533

Helwig, Andreas and Ahfock, Tony L. (2009) Ultra-capacitor assisted battery storage for remote area power supplies: a case study. In: AUPEC 2009: Sustainable Energy Technologies and Systems, 27-30 Sept 2009, Adelaide, South Australia.

Sharma, R. and Ball, J. A. R. (2009) Unipolar stitched inverter low-frequency harmonics caused by stitching delay. IET Power Electronics, 2 (5). pp. 508-516. ISSN 1755-4535

Wang, Xin and Niu, Haitao and Lin, Tong and Wang, Xungai (2009) Needleless electrospinning of nanofibers with a conical wire coil. Polymer Engineering and Science, 49 (8). pp. 1582-1586. ISSN 0032-3888

Ku, H. (2009) Teaching of critical path networks using software packages. In: RSKT 2009: 4th International Conference on Rough Sets and Knowledge Technology , 14-16 Jul 2009, Gold Coast, Australia.

Chong, Albert and Newsham-West, Richard and Milburn, Peter (2009) 3D photogrammetric analysis of the load-bearing foot. In: ISB 2009: XXII Congress of the International Society of Biomechanics , 5-9 Jul 2009, Cape Town, South Africa.

Golshani, Aliakbar and Tran-Cong, Thanh (2009) Energy analysis of hydraulic fracturing. KSCE Journal of Civil Engineering, 13 (4). pp. 219-224. ISSN 1226-7988

Teng, Lanzhi and Wen, Peng (2009) Stability analysis of model-based networked control system with unreliable links. In: RSKT 2009: 4th International Conference on Rough Sets and Knowledge Technology , 14-16 Jul 2009, Gold Coast, Australia.

Yousif, B. F. and Devadas, Alvin and Yusaf, Talal (2009) Adhesive wear and frictional behaviour of multilayered polyester composite based on betelnut fiber mats under wet contact conditions. Surface Review and Letters, 16 (3). pp. 407-414. ISSN 0218-625X

Le-Cao, K. and Mai-Duy, N. and Tran-Cong, T. (2009) An effective integrated-RBFN Cartesian-grid discretization for the stream function-vorticity-temperature formulation in nonrectangular domains. Numerical Heat Transfer Part B: Fundamentals, 55 (6). pp. 480-502. ISSN 1040-7790

Choy, Yat-Sze and Lau, Kin-Tak and Wang, C. and Chau, C. W. and Liu, Yang and Hui, D. (2009) Composite panels for reducing noise in air conditioning and ventilation systems. Composites Part B: Engineering, 40 (4). pp. 259-266. ISSN 1359-8368

Mai-Duy, Nam and Tran-Cong, Thanh (2009) Integrated radial-basis-function networks for computing Newtonian and non-Newtonian fluid flows. Computers and Structures, 87 (11-12). pp. 642-650. ISSN 0045-7949

Peng, Tianshu and Struthers, Craig and Wen, Peng (2009) Real-time pressure monitoring and control of a hydraulic system without sensor. In: 4th International Conference on Rough Sets and Knowledge Technology (RSKT 2009), 14-16 Jul 2009, Gold Coast, Australia.

Al-Falahi, Amir and Yusoff, M. Z. and Shuaib, N. H. and Yusaf, T. (2009) Flow instability in shock tube due to shock wave-boundary layer-contact surface interactions, a numerical study. European Journal of Scientific Research, 30 (1). pp. 164-176. ISSN 1450-216X

Ku, H. and Cardona, F. and Pattarachaiyakoop, N. and Trada, M. (2009) Fracture toughness of phenol formaldehyde composites reinforced with e-spheres. Journal of Composite Materials, 43 (7). pp. 741-754. ISSN 0021-9983

Ku, H. S. and Fok, S. C. and Siores, E. (2009) Contrasts on fracture toughness and flexural strength of varying percentages of SLG-reinforced phenolic composites. Journal of Composite Materials, 43 (8). pp. 885-895. ISSN 0021-9983

Guo, Qing Bing and Rong, Min Zhi and Jia, Guo Liang and Lau, Kin-Tak and Zhang, Ming Qiu (2009) Sliding wear performance of nano-SiO2/short carbon fiber/epoxy hybrid composites. Wear, 266 (7-8). pp. 658-665. ISSN 0043-1648

Ren, Feifei and Wang, Yongwei and Li, Huang and Wang, Xiaojie and Wang, Jing (2009) Preparation and characterization of series polyimides. China Synthetic Resin and Plastics, 26 (2). pp. 19-22. ISSN 1002-1396

Mai-Duy, Nam and Tran-Cong, Thanh (2009) An integrated-RBF technique based on Galerkin formulation for elliptic differential equations. Engineering Analysis with Boundary Elements, 33 (2). pp. 191-199. ISSN 0955-7997

Zou, Weibao and Li, Yan and Li, Zhilin and Ding, Xiaoli (2009) Improvement of the accuracy of InSAR image co-registration based on tie points - a review. Sensors, 9 (2). pp. 1259-1281. ISSN 1424-8220

Liang, Qing Quan (2009) Performance-based analysis of concrete-filled steel tubular beam–columns, part I: theory and algorithms. Journal of Constructional Steel Research, 65 (2). pp. 363-372. ISSN 0143-974X

Liang, Qing Quan (2009) Performance-based analysis of concrete-filled steel tubular beam–columns, part II: verification and applications. Journal of Constructional Steel Research, 65 (2). pp. 351-362. ISSN 0143-974X

Guo, Qing Bing and Lau, Kin-Tak and Zheng, Bing Fa and Rong, Min Zhi and Zhang, Ming Qiu (2009) Imparting ultra-low friction and wear rate to epoxy by the incorporation of microencapsulated lubricant? Macromolecular Materials and Engineering, 294 (1). pp. 20-24. ISSN 1438-7492

Gambetta, D. and Ahfock, A. (2009) A new sensorless commutation technique for brushless DC motors. IET Electric Power Applications, 3 (1). pp. 40-49. ISSN 1751-8660

Mai-Duy, Nam and See, Howard and Tran-Cong, Thanh (2009) A spectral collocation technique based on integrated Chebyshev polynomials for biharmonic problems in irregular domains. Applied Mathematical Modelling, 33 (1). pp. 284-299. ISSN 0307-904X

Xiang, Wei and Otto, Colin W. and Wen, Peng (2009) Automated vehicle classification system for AUSTROADS standard based upon laser sensor technology. Australian Journal of Electrical and Electronics Engineering, 5 (2). pp. 95-106. ISSN 1448-837X

McIntyre, Timothy J. and Eichmann, Troy N. and Mallon, Michael and Potter, Daniel and Brandis, Aaron and Jacobs, Carolyn and Morgan, Richard and Jacobs, Peter and Buttsworth, David R. (2009) The generation and measurement of high temperature radiating flows in a high enthalpy pulsed facility. In: 3rd International Workshop on Radiation of High Temperature Gases in Atmospheric Entry, 30 Sep - 3 Oct 2008, Heraklion, Greece.

Mai-Duy, Nam and Tran-Cong, Thanh (2009) A Cartesian-grid discretisation scheme based on local integrated RBFNs for two-dimensional elliptic problems. CMES: Computer Modeling in Engineering and Sciences, 51 (3). pp. 213-238. ISSN 1526-1492

Malpress, Ray and Buttsworth, David R. (2009) A comparison between two-position variable compression ratio and continuously variable compression ratio engines using numerical simulation. In: ASME Internal Combustion Engine Division Fall Technical Conference (ICEF 2009), 27-30 Sep 2009, Lucerne, Switzerland.

Ho-Minh, D. and Mai-Duy, Nam and Tran-Cong, Thanh (2009) A Galerkin-RBF approach for the streamfunction-vorticity-temperature formulation of natural convection in 2D enclosured domains. CMES: Computer Modeling in Engineering and Sciences, 44 (3). pp. 219-248. ISSN 1526-1492

Brodie, Ian and Brodie, Lyn (2009) A knowledge-information-data concept model for engineering education. Australasian Journal of Engineering Education, 15 (3). pp. 137-144. ISSN 1324-5821

Zhou, Hong and Zhang, Zhongwei (2009) Adaptive end-to-end QoS provision for real-time multimedia applications in heterogeneous multi-hop wireless networks. In: 5th International ICST Mobile Multimedia Communications Conference (MobiMedia'09), 7-9 September 2009, London, United Kingdom.

Malpress, Ray and Buttsworth, David R. (2009) Air motor for improved engine brake efficiency: design and preliminary experiments. In: ICEE 2009: 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability, 7-8 Dec 2009, Malacca, Malaysia.

Al-Falahi, Amir and Yusoff, M. Z. and Yusaf, T. (2009) An experimental evaluation of shock wave strength and peak pressure in a conventional shock tube and a free-piston compressor. In: IMECE 2008: ASME International Mechanical Engineering Congress and Exposition, 31 Oct-6 Nov 2008, Boston, MA, USA.

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2009) An improved quadrilateral flat element with drilling degrees of freedom for shell structural analysis. CMES: Computer Modeling in Engineering and Sciences, 49 (2). pp. 81-110. ISSN 1526-1492

Islam, M. M. and Kim, H. S. (2009) An overview on manufacturing and properties of syntactic foams made of ceramic hollow microspheres and starch. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Wandel, Andrew P. and Lindstedt, R. Peter (2009) Application of hybrid binomial Langevin-multiple mapping conditioning method to reacting jet flow. In: Australian Combustion Symposium 2009 (ACS09), 2-4 Dec 2009, Brisbane, Australia.

McCarthy, Cheryl and Billingsley, John (2009) Applied machine vision in agriculture at the NCEA. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Epaarachchi, J. A. (2009) Change of dynamic response of pultruded composite components used in advanced composite structures due to fatigue and fracture. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Shahab, Anna and Wen, Peng and Richard, George (2009) Convection drying process modeling and simulation study based on tomato. In: International Conference on Robotics, Informatics, Intelligence Control System Technology (RIIT 2009), 11- 14 December 2009, Bangkok, Thailand.

Zhuge, Yan and Yeap, Kai (2009) Debonding characteristics of masonry structures retrofitted with FRP. In: 17th Annual International Conference on Composites or Nano Engineering ICCE17, 26 Jul-1 Aug 2009, Honolulu, Hawaii, USA.

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Boh, Tjasa and Billingsley, John and Bradbeer, Robin and Hodgson, Paul (2009) Development of a multi-drive submersible platform for deep seabed research. In: OCEANS 2009: Balancing Technology with Future Needs, 11-14 May 2009, Bremen, Germany.

Wandel, Andrew P. and Chakraborty, Nilanjan and Mastorakos, E. (2009) Direct numerical simulations of turbulent flame expansion in fine sprays. Proceedings of the Combustion Institute, 32 (2). pp. 2283-2290. ISSN 1540-7489

Hamawand, Ihsan and Mohammed, Thamer and Jalhoom, Moayyed G. (2009) Direct reaction of silicon with ethyl chloride in a fluidized bed reactor. International Journal of Chemical Reactor Engineering, 7. A9. ISSN 1542-6580

Epaarachchi, Jayantha A. and Birt, Peter (2009) Dynamic behaviour of laterally loaded pultruted composite beams. In: 9th International Conference of the Mechanical and Physical Behaviour of Materials Under Dynamic Loading (DYMAT 2009), 7-11 Sept 2009, Brussels, Belgium.

Braithwaite, Stephen and Addie, Ron (2009) ECOOSE: an echo cancellation object oriented simulation environment. In: 2nd International Conference on Simulation Tools and Techniques for Communications, Networks and Systems and Workshops, 2-6 Mar 2009, Rome, Italy.

Vandenbroucke, A. and Cardona, F. and Ku, H. and Rogers, D. (2009) Effects of chopped hemp on mechanical and thermal properties of epoxy resins. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

McCarthy, Alison and Hancock, Nigel and Raine, Steven R. (2009) Exploration of data requirements for adaptive control of irrigation scheduling. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao, eds. (2009) Futures in mechanics of structures and materials: proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), Toowoomba, Australia, 2-5 December 2008. Taylor & Francis (CRC Press), London, United Kingdom. ISBN 978-0-415-49196-9

Ahmed, Waqas and Gao, Jason and Zhou, Hong and Faulkner, Michael (2009) Goodput and channel allocation in opportunistic spectrum access networks. In: PIMRC 2009: 20th IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, 13-16 Sep 2009, Tokyo, Japan.

Manalo, A. C. and Mutsuyoshi, H. and Asamoto, S. and Aravinthan, T. and Matsui, T. (2009) Mechanical behavior of hybrid FRP composites with bolted joints. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Dahmani, L. and Khennane, A. and Kaci, S. (2009) Modeling and influence of shear retention parameter on the response of reinforced concrete structural elements. Strength of Materials, 41 (4). pp. 423-430. ISSN 0039-2316

Nguyen-Ky, T. and Wen, Peng and Li, Yan (2009) Monitoring the depth of anesthesia using discrete wavelet transform and power spectral density. In: RSKT 2009: 4th International Conference on Rough Sets and Knowledge Technology, 14-16 Jul 2009, Gold Coast, Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2009) On the use of integrated radial basis function schemes in weighted residuals statements for elliptic problems. In: 31st International Conference on Boundary Elements and Other Mesh Reduction Methods (BEM/MRM 31), 2-4 Sep 2009, New Forest, UK.

Adnan, Muhammad and She, Haoqiu and Wang, Yafeng and Yang, Dacheng and Xiang, Wei (2009) Performance of co-operative relay for multicast multi-hop networks using virtual MIMO. In: IEEE International Conference on Advanced Infocomm Technology (ICAIT09), 7-9 July 2009, Xi'an, China.

Banhazi, Thomas and Black, John L. (2009) Precision livestock farming: a suite of electronic systems to ensure the application of best practice management on livestock farms. Australian Journal of Multi-Disciplinary Engineering, 7 (1). pp. 1-13. ISSN 1448-8388

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao (2009) Preface to futures in mechanics of structures and materials conference. ACMSM20. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Gibbings, Peter and Bruce, Christine and Lidstone, John (2009) Problem-based learning (PBL) in virtual space: developing experiences for professional development. VDM Verlag Dr Muller, Berlin, Germany. ISBN 978-3-639-16314-8

Buttsworth, David R. and Agrira, Abdalla and Malpress, Ray and Yusaf, Talal (2009) Simulation of instantaneous heat transfer in spark ignition internal combustion engines: unsteady thermal boundary layer modelling. In: ASME Internal Combustion Engine Division Fall Technical Conference (ICEF 2009) , 27-30 Sep 2009, Lucerne, Switzerland.

Wang, Xin and Xu, Weilin and Li, Wenbin and Cui, Weigang (2009) Study on the electrical resistance of textiles under wet conditions. Textile Research Journal, 79 (8). pp. 753-760. ISSN 0040-5175

Jensen, Troy and Apan, Armando and Zeller, Leslie (2009) The use of a UAV as a remote sensing platform in agriculture. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Yusaf, Talal and Najafi, Gholamhassan and Buttsworth, David R. (2009) Theoretical and experimental investigation of SI engine performance and exhaust emissions using ethanol-gasoline blended fuels. In: 3rd International Conference on Energy and Environment (ICEE2009), 7-8 December 2009, Malacca, Malaysia.

Wen, Peng and Stapleton, Cary and Li, Yan (2008) Tension control of a winding machine for rectangular coils. In: ICARCV 2008: 10th International Conference on Control, Automation, Robotics and Vision, 17-20 Dec 2008, Hanoi, Vietnam.

Mai-Duy, Nam and Tran-Cong, Thanh (2008) A second-order continuity domain-decomposition technique based on integrated Chebyshev polynomials for two-dimensional elliptic problems. Applied Mathematical Modelling, 32 (12). pp. 2851-2862. ISSN 0307-904X

Ku, H. and Jacobson, W. and Trada, M. and Cardona, F. and Rogers, D. (2008) Tensile tests of phenol formaldehyde SLG reinforced composites: pilot study. Journal of Composite Materials, 42 (26). pp. 2783-2793. ISSN 0021-9983

Shiau, J. S. and Watson, J. F. (2008) 3D bearing capacity of shallow foundations located near deep excavation sites. In: 2008 International Conference on Deep Excavation: Challenges Risk Management of Underground Construction (ICDE 2008), 10-12 Nov 2008, Singapore.

Bordas, Stephane and Duflot, Marc and Le, Phong (2008) A simple error estimator for extended finite elements. Communications in Numerical Methods in Engineering, 24 (11). pp. 961-971. ISSN 1069-8299

Wen, P. and Lu, T.-W. (2008) Decoupling control of a twin rotor MIMO system using robust deadbeat control technique. IET Control Theory and Applications, 2 (11). pp. 999-1007. ISSN 1751-8644

Li, Xiao-Feng and Lau, Kin-Tak and Yin, Yan-Sheng (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology, 68 (14). pp. 2876-2881. ISSN 0266-3538

Si, Xiaojuan and Guo, Linfeng and Wang, Yimin and Lau, Kin-Tak (2008) Preparation and study of polypropylene/polyethylene terephthalate composite fibres. Composites Science and Technology, 68 (14). pp. 2943-2947. ISSN 0266-3538

Golshani, Aliakbar and Tran-Cong, Thanh and Buttsworth, David (2008) Impact on a water filled cylinder. In: ACMFMS 2008: Asian Conference on Mechanics of Functional Materials and Structures, 31 Oct-3 Nov 2008, Matsue, Japan.

Rong, Jian Hua and Liang, Qing Quan and Guo, Seng and Mu, Rang Ke (2008) A topological optimization method considering stress constraints. In: ICICTA 2008: International Conference on Intelligent Computation Technology and Automation, 20-22 Oct 2008, Changsha, China.

Zhu, Z. W. and Zhang, H. F. and Wang, H. and Ding, B. Z. and Hu, Z. Q. (2008) Influence of casting temperature on the thermal stability of Cu- and Zr-based metallic glasses: theoretical analysis and experiments. Journal of Materials Research, 23 (10). pp. 2714-2719. ISSN 0884-2914

Islam, Md Mainul and Kim, Ho Sung (2008) Manufacture of syntactic foams using starch as binder: post-mold processing. Materials and Manufacturing Processes, 23 (8). pp. 884-892. ISSN 1042-6914

Zhu, Yue-Feng and Shi, Lei and Liang, Ji and Hui, David and Lau, Kin-Tak (2008) Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics. Composites Part B: Engineering, 39 (7-8). pp. 1136-1141. ISSN 1359-8368

Hancock, Nigel (2008) Method and apparatus for measuring electrical conductivity. AG01N2702FI .

Mai-Duy, Nam and Le-Cao, Khoa and Tran-Cong, Thanh (2008) A Cartesian grid technique based on one-dimensional integrated radial basis function networks for natural convection in concentric annuli. International Journal for Numerical Methods in Fluids, 57 (12). pp. 1709-1730. ISSN 0271-2091

Wang, Zhicai and Xu, Cailing and Zhao, Yongqing and Zhao, Dandan and Wang, Zhe and Li, Hulin and Lau, Kin-Tak (2008) Fabrication and mechanical properties of exfoliated clay-CNTs/epoxy nanocomposites. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 490 (1-2). pp. 481-487. ISSN 0921-5093

Suslov, Sergey A. (2008) Thermo-magnetic convection in a vertical layer of ferromagnetic fluid. Physics of Fluids, 20 (8). 084101-084118. ISSN 1070-6631

Shiau, Jim S. and Thomas, Caroline J. and Smith, Catherine A. (2008) A FLAC model for classical earth pressure problems. In: 1st International FLAC/DEM Symposium on Numerical Modeling, 25-27 Aug 2008, Minneapolis, United States.

Yousif, B. F. and El-Tayeb, N. S. M. (2008) Wear and friction characteristics of CGRP composite under wet contact condition using two different test techniques. Wear, 265 (5-6). pp. 856-864. ISSN 0043-1648

Ku, H. and Cardona, F. and Rogers, D. and Vandenbroucke, A. (2008) Effects of EPON on mechanical and thermal properties of epoxy resins. In: ICMMSE 2008: International Conference on Multifunctional Materials and Structures, 28-31 Jul 2008, Hong Kong.

Teng, Lanzhi and Wen, Peng (2008) Data missing and make-up work studies over a PIDn networked control system. In: MSV 2008: International Conference on Modeling, Simulation and Visualization Methods , 14-17 Jul 2008, Las Vegas NV. USA.

Liu, Xiaoye and Zhang, Zhenyu (2008) Ground truth extraction from LiDAR data for image orthorectification. In: 2008 International Workshop on Earth Observation and Remote Sensing Applications, 30 Jun-2 Jul 2008, Beijing, China.

Aravinthan, Thiru and Omar, Tarek (2008) Fibre composite windmill structure - challenges in the design and development. In: CICE 2008: 4th International Conference on FRP Composites in Civil Engineering, 22-24 Jul 2008, Zurich, Switzerland.

Chipara, Mircea and Brittain, Wiliam J. and Lau, Kin-Tak and Chipara, Magdalena (2008) Polycarbonate-carbon nanofibers composites: an electron spin resonance study. Multi-functional Materials and Structures: selected, peer reviewed papers from International Conference on Multifunctional Materials and Structures. pp. 1165-1168. ISSN 1022-6680

Deo, Ravinesh C. and Mi, Jianchun and Nathan, Graham J. (2008) The influence of Reynolds number on a plane jet. Physics of Fluids, 20 (7). 075108-1. ISSN 1070-6631

McDougall, Kevin (2008) Unlocking the potential of spatial information through data sharing: it's a two way street. In: Global Warning: What's Happening in Paradise, 17-19 Jul 2008, Gold Coast, Australia.

Fu, H. M. and Zhang, H. F. and Wang, H. and Hu, Z. Q. (2008) Cu-based bulk amorphous alloy with larger glass-forming ability and supercooled liquid region. Journal of Alloys and Compounds, 458 (1-2). pp. 390-393. ISSN 0925-8388

Munoz, J.-C. and Ku, H. and Cardona, F. and Rogers, D. (2008) Effects of catalysts and post-curing conditions in the polymer network of epoxy and phenolic resins: preliminary results. Journal of Materials Processing Technology, 202 (1-3). pp. 486-492. ISSN 0924-0136

Nguyen-Van, H. and Mai-Duy, N. and Tran-Cong, T. (2008) Free vibration analysis of laminated plate/shell structures based on FSDT with a stabilized nodal-integrated quadrilateral element. Journal of Sound and Vibration, 313 (1-2). pp. 205-223. ISSN 0022-460X

Li, Wenbin and Xu, Weilin and Cui, Weigang and Wang, Xin (2008) A novel method to analyze the moisture liberation of textile fabrics. Fibers and Polymers, 9 (3). pp. 312-316. ISSN 1229-9197

Wang, H. and Estrin, Y. and Zuberova, Z. (2008) Bio-corrosion of a magnesium alloy with different processing histories. Materials Letters, 62 (16). pp. 2476-2479. ISSN 0167-577X

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2008) Investigation of embedded near infrared fibre Bragg grating (FBG) sensors (830 nm) in structural health monitoring of glass fibre composite structures. In: 19th International Conference on Optical Fibre Sensors (OFS-19), 15-18 Apr 2008, Perth, Australia.

Zhao, Weichang and Pinnaduwage, Lal A. and Leis, John W. and Gehl, Anthony C. and Allman, Steve L. and Shepp, Allan and Mahmud, Ken K. (2008) Identification and quantification of components in ternary vapor mixtures using a microelectromechanical-system-based electronic nose. Journal of Applied Physics, 103 (10). pp. 1-11. ISSN 0021-8979

Fu, H. M. and Qiu, D. and Zhang, M. X. and Wang, H. and Kelly, P. M. and Taylor, J. A. (2008) The development of a new grain refiner for magnesium alloys using the edge-to-edge model. Journal of Alloys and Compounds, 456 (1-2). pp. 390-394. ISSN 0925-8388

Roberts, A. J. (2008) The inertial dynamics of thin film flow of non-Newtonian fluids. Physics Letters Section A: General, Atomic and Solid State Physics, 372 (10). pp. 1607-1611. ISSN 0375-9601

Rong, Jian Hua and Liang, Qing Quan (2008) A level set method for topology optimization of continuum structures with bounded design domain. Computer Methods in Applied Mechanics and Engineering, 197 (17-18). pp. 1447-1465. ISSN 0045-7825

Liang, Qing Quan (2008) Nonlinear analysis of short concrete-filled steel tubular beam-columns under axial load and biaxial bending. Journal of Constructional Steel Research, 64 (3). pp. 295-304. ISSN 0143-974X

Goh, S. and Ku, H. and Ang, S. L. (2008) Prediction of crushing stress in composite materials. Journal of Composite Materials, 42 (5). pp. 467-484. ISSN 0021-9983

Wang, H. and Li, Q. (2008) Solidification microstructure modelling using cellular automaton method. In: International Conference on Frontiers in Materials Science and Technology (FMST 2008), 26-28 Mar 2008, Brisbane, Australia.

Liu, Xiaoye (2008) Airborne LiDAR for DEM generation: some critical issues. Progress in Physical Geography: an international review of geographical work in the natural and environmental sciences, 32 (1). pp. 31-49. ISSN 0309-1333

Ku, Harry and Rogers, David and Davey, Robert and Cardona, Francisco and Trada, Mohan (2008) Fracture toughness of phenol formaldehyde composites: pilot study. Journal of Materials Engineering and Performance, 17 (1). pp. 85-90. ISSN 1059-9495

Ku, H. S. (2008) Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation. Journal of Electromagnetic Waves and Applications, 22 (1). pp. 69-84. ISSN 0920-5071

Rong, J. H. and Yi, J. H. and Liang, Q. Q. (2008) A level set method with maximum design domain limits. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Mai-Cao, L. and Tran-Cong, T. (2008) A meshless approach to capturing moving interfaces in passive transport problems. CMES: Computer Modeling in Engineering and Sciences, 31 (3). pp. 157-188. ISSN 1526-1492

Le, P. and Mai-Duy, N. and Tran-Cong, T. and Baker, G. (2008) A meshless modeling of dynamic strain localization in quasi-brittle materials using radial basis function networks. CMES: Computer Modeling in Engineering and Sciences, 25 (1). pp. 43-67. ISSN 1526-1492

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2008) A node-based element for analysis of planar piezoelectric structures. CMES: Computer Modeling in Engineering and Sciences, 36 (1). pp. 65-95. ISSN 1526-1492

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2008) A smoothed four-node piezoelectric element for analysis of two-dimensional smart structures. CMES: Computer Modeling in Engineering and Sciences, 23 (3). pp. 209-222. ISSN 1526-1492

Ticoalu, A. and Aravinthan, T. and Karunasena, W. (2008) An investigation on the stiffness of timber sleepers for the design of fibre composite sleepers. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Ku, Kenneth and Bradbeer, Robin and Lam, Katherine (2008) An underwater camera and instrumentation system for monitoring the undersea environment. In: Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany, pp. 167-179. ISBN 978-3-540-74026-1

Cubero, Samuel N. (2008) Blind search inverse kinematics for controlling all types of serial-link robot arms. In: Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany, pp. 229-244. ISBN 978-3-540-74026-1

Omar, Tarek and Aravinthan, Thiru (2008) Design and development of a fibre composite wind mill structure. In: Australasian Structural Engineering Conference 2008: Engaging with Structural Engineering, 26-27 June 2008, Melbourne, Vic, Australia.

Asamoto, S. and Mutsuyoshi, H. and Aravinthan, T. and Suzukawa, K. (2008) Experimental investigation of innovative hybrid composite girders with GFRP and CFRP. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Morgan, R. G. and McIntyre, T. J. and Buttsworth, D. R. and Jacobs, P. A. and Potter, D. F. and Brandis, A. M. and Gollan, R. J. and Jacobs, C. M. and Capra, B. R. and McGilvray, M. and Eichmann, T. N. (2008) Impulse facilities for the simulation of hypersonic radiating flows. In: 38th AIAA Fluid Dynamics Conference and Exhibit (AIAA 2008), 23-26 Jun 2008, Seattle, WA. United States.

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2008) M2S2 modular deployable shelter system: concept and analysis technique. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Billingsley, John and Bradbeer, Robin, eds. (2008) Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany. ISBN 978-3-540-74026-1

Ku, Kenneth and Bradbeer, Robin (2008) Modelling pneumatic muscles as hydraulic muscles for use as an underwater actuator. In: Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany, pp. 209-217. ISBN 978-3-540-74026-1

Billingsley, John (2008) More machine vision applications in the NCEA. In: Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany, pp. 333-343. ISBN 978-3-540-74026-1; 978-3-540-74027-8

Al-Falahi, Amir and Yusoff, M. Z. and Yusaf, T. (2008) Numerical simulation of inviscid transient flows in shock tube and its validations. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 2 (7). pp. 1-11. ISSN 1307-7465

Shiau, Jim S. and Watson, Joshua Francis and Arnold, Matthew David (2008) Numerical study of a shallow foundation located near 45 degree slopes. In: ASEM 2008: 4th International Conference on Advances in Structural Engineering and Mechanics , 26-28 May 2008, Jeju, Korea.

Suntharavadivel, T. G. and Aravinthan, T. (2008) Strengthening of shear damaged RC beams with external clamping. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Ren, Feifei and Li, Minghui and Wang, Jing and He, Dongning (2008) Synthesis and imidization of poly(amideimide)s. Journal of Dalian Institute of Light Industry, 27 (4). pp. 316-318. ISSN 1674-1404

Al-Falahi, Amir and Yusaf, T. and Yusoff, M. Z. (2007) Experimental and CFD study of the effects of design parameters on Reynolds number in a short duration hypersonic test facility. In: EPMESC X: Enhancement and Promotion of Computational Methods in Engineering and Science X, 21-23 Aug 2006, Sanya, China.

Basnet, B. B. and Apan, A. A. (2007) Degree of site suitability measurement in a GIS: the effect of standardisation method. In: MODSIM07: International Congress on Modelling and Simulation: Land, Water and Environmental Management: Integrated Systems for Sustainability, 10-13 Dec 2007, Christchurch, New Zealand.

Liu, X. and Zhang, Z. and Peterson, J. and Chandra, S. (2007) The effect of LiDAR data density on DEM accuracy. In: MODSIM07: International Congress on Modelling and Simulation: Land, Water and Environmental Management: Integrated Systems for Sustainability, 10-13 Dec 2007, Christchurch, New Zealand.

Billingsley, John (2007) Bovine intelligence for training horses. In: M2VIP 2007: 14th Annual Conference on Mechatronics and Machine Vision in Practice, 3-5 Dec 2007, Xiamen, China.

Billingsley, John (2007) Vision applications in agriculture. In: M2VIP 2007: 14th Annual Conference on Mechatronics and Machine Vision in Practice, 3-5 Dec 2007, Xiamen, China.

Ku, H. and Chan, W. L. and Trada, M. and Baddeley, D. (2007) An evaluation of fracture toughness of vinyl ester composites cured under microwave conditions. Journal of Materials Engineering and Performance, 16 (6). pp. 741-745. ISSN 1059-9495

Cardona, F. and Ku, H. and Pattarachaiyakoop, N. and Rogers, D. and Trada, M. (2007) Fracture toughness of phenol formaldehyde composites post-cured in microwaves. Journal of Electromagnetic Waves and Applications, 21 (14). pp. 2137-2146. ISSN 0920-5071

Sanathkumara, Kumarapelige N. and Cubero, Samuel N. (2007) Automated soil hardness testing machine. In: M2VIP 2007: 14th Annual Conference on Mechatronics and Machine Vision In Practice, 3-5 Dec 2007, Xiamen, China.

Buttsworth, D. R. and Davison, C. and MacLeod, J. D. and Strapp, J. W. (2007) Evaporator design for an isokinetic total water content probe in a naturally aspirating configuration. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Deo, Ravinesh C. and Mi, Jianchun and Nathan, Graham J. (2007) Experimental investigations of the effect of Reynolds number on a plane jet. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Queensland.

Mutsuyoshi, H. and Aravinthan, T. and Asamoto, S. and Manalo, A. C. and Suzukawa, K. (2007) Flexural behavior of hybrid FRP girder with concrete deck. In: APFIS 2007: 1st Asia-Pacific Conference on FRP in Structures, 12-14 Dec 2007, Hong Kong, China.

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2007) Innovative all composite multi-pultrusion truss systems: FE modelling and behavioural issues. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

Al-Falahi, Amir and Yusoff, M. Z. and Yusaf, T. (2007) Numerical and experimental study to evaluate the performance of Universiti Tenaga Nasional short duration hypersonic test facility. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Omar, T. and Aravinthan, T. and Van Erp, G. (2007) The effect of core architecture on the behaviour of sandwich columns under edgewise compression loading. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

Deo, Ravinesh C. and Nathan, Graham J. and Mi, Jianchun (2007) Comparison of turbulent jets issuing from rectangular nozzles with and without sidewalls. Experimental Thermal and Fluid Science, 32 (2). pp. 596-606. ISSN 0894-1777

Kist, Alexander A. (2007) Erlang B as a performance model for IP flows. In: ICON 2007: 15th IEEE International Conference on Networks, 19-21 Nov 2007, Adelaide, Australia.

Cardona, F. and Rogers, D. and Van Erp, G. (2007) Investigation by TGA-FTIR of the effect of styrene content and thickness on the UV-curing of vinylester resins. Journal of Thermoplastic Composite Materials, 20 (6). pp. 601-615. ISSN 0892-7057

Deo, Ravinesh C. and Mi, Jianchun and Nathan, Graham J. (2007) The influence of nozzle-exit geometric profile on statistical properties of a turbulent plane jet. Experimental Thermal and Fluid Science, 32 (2). pp. 545-559. ISSN 0894-1777

DasGupta, Jishu and Ziri-Castro, Karla and Suzuki, Hajime (2007) Capacity analysis of MIMO-OFDM broadband channels in populated indoor environments. In: 7th International Symposium on Communications and Information Technologies (ISCIT 2007:) , 16-19 Oct 2007, Sydney, Australia.

Doherty, William and Halley, Peter J. and Edye, Les and Rogers, David and Cardona, Francisco and Park, Yosup and Woo, Tim (2007) Studies on polymers and composites from lignin and fiber derived from sugar cane. Polymers for Advanced Technologies, 18 (8). pp. 673-678. ISSN 1042-7147

Ning, Zhiliang and Wu, Peilian and Wang, Hao and Cao, Fuyang and Sun, Jianfei (2007) Effect of pouring temperature on thixotropic microstructure formation of AZ91. Rare Metals, 26 (S1). pp. 180-184. ISSN 1001-0521

Deo, Ravinesh C. and Mi, Jianchun and Nathan, Graham J. (2007) The influence of nozzle aspect ratio on plane jets. Experimental Thermal and Fluid Science, 31 (8). pp. 825-838. ISSN 0894-1777

Le, Phong and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2007) A meshless IRBFN-based numerical simulation of dynamic strain localization in quasi-brittle materials. In: USNCCM9: 9th US National Congress on Computational Mechanics , 22-26 Jul 2007, San Francisco, CA, United States.

Pinnaduwage, L. A. and Zhao, W. and Gehl, A. C. and Allman, S. L. and Shepp, A. and Mahmud, K. K. and Leis, J. W. (2007) Quantitative analysis of ternary vapor mixtures using a microcantilever-based electronic nose. Applied Physics Letters, 91 (4). pp. 1-3. ISSN 0003-6951

Brodie, Ian and Rosewell, Colin (2007) Theoretical relationships between rainfall intensity and kinetic energy variants associated with stormwater particle washoff. Journal of Hydrology, 340 (1-2). pp. 40-47. ISSN 0022-1694

Parsons, David (2007) The environmental impact of disposable versus re-chargeable batteries for consumer use. International Journal of Life Cycle Assessment, 12 (3). pp. 197-203. ISSN 0948-3349

Faigl, Pavel and Rogers, David and Maurin, Romain and Van Erp, Gerard (2007) Plant based resins for fibre composites. In: 4th Annual Composites Australia and Composites CRC Conference (CRC 2007): New Technology Taking Shape, 19-20 Apr 2007, Gold Coast, Australia.

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2007) Innovative all composite multi-pultrusion truss system for stressed arch deployable shelters. In: AICSGE 6: 6th Alexandria International Conference on Structural and Geotechnical Engineering, 15-17 Apr 2007, Alexandria, Egypt.

Omar, T. and Van Erp, G. and Key, P. (2007) Modular deployable composite shelters - truss system. In: ACIC 2007: Advanced Composites in Construction Conference , 2-4 Apr 2007, Bath, UK.

Mai-Duy, Nam and Tanner, Roger I. (2007) A spectral collocation method based on integrated Chebyshev polynomials for two-dimensional biharmonic boundary-value problems. Journal of Computational and Applied Mathematics, 201 (1). pp. 30-47. ISSN 0377-0427

Mai-Duy, Nam and Mai-Cao, Lan and Tran-Cong, Thanh (2007) Computation of transient viscous flows using indirect radial basis function networks. CMES: Computer Modeling in Engineering and Sciences, 18 (1). pp. 59-78. ISSN 1526-1492

Ku, H. and Trada, M. and Puttgunta, V. C. (2007) Mechanical properties of vinyl ester composites cured by microwave irradiation: pilot study. Key Engineering Materials, 334-33. pp. 537-540. ISSN 1013-9826

Yusaf, Talal and Buttsworth, David R. (2007) Characterisation of mixing rate due to high power ultrasound. Ultrasonics Sonochemistry, 14 (2). pp. 266-274. ISSN 1350-4177

Sharifian, S. Ahmad and Buttsworth, David R. (2007) Evaluation of glued-diaphragm fibre optic pressure sensors in a shock tube. Shock Waves, 16 (3). pp. 189-197. ISSN 0938-1287

Mushtaq, Shahbaz and Dawe, David and Lin, Hong and Moya, Piedad (2007) An assessment of collective action for pond management in the Zhanghe Irrigation System (ZIS) China. Agricultural Systems, 92 (1-3). pp. 140-156. ISSN 0308-521X

Cardona, F. and Rogers, D. and Davey, S. and Van Erp, G. (2007) Investigation of the effect of styrene content on the ultimate curing of vinylester resins by TGA-FTIR. Journal of Composite Materials, 41 (2). pp. 137-152. ISSN 0021-9983

Mai-Duy, N. and Tanner, R. I. (2007) A collocation method based on one-dimensional RBF interpolation scheme for solving PDEs. International Journal of Numerical Methods for Heat and Fluid Flow, 17 (2). pp. 165-186. ISSN 0961-5539

Cubero, Samuel and Tjoe, Donal (2007) A low cost vision-guided car for autonomous racing car competitions. In: M2VIP 2005: 12th Annual Conference on Mechatronics and Machine Vision in Practice, 29 Nov-1 Dec 2005, Manila, Philippines.

Le, Phong and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2007) A numerical study of strain localization in elasto-thermo-viscoplastic materials using radial basis function networks. Computers, Materials and Continua, 5 (2). pp. 129-150. ISSN 1546-2218

Ahfock, T. and Wells, C. G. (2007) A practical demonstration of electromagnetic braking. In: AUPEC 2007: 17th Australasian Universities Power Engineering Conference , 9-12 Dec 2007, Perth, Western Australia.

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2007) A simple and accurate four-node quadrilateral element using stabilized nodal integration for laminated plates. CMC: Computers, Materials and Continua, 6 (3). pp. 159-176. ISSN 1546-2218

Chong, Albert K.-F. (2007) Biology and zoology. In: Applications of 3D measurement from images. Whittles Publishing, Dunbeath, Scotland, pp. 210-224. ISBN 1870325699; 9781870325691

Brodie, Ian and Young, Frank (2007) Case studies of applying urban surface data in evaluating stormwater management issues. Journal of Spatial Hydrology, 7 (2). pp. 1-16.

Mai-Duy, Nam and Khennane, Amar and Tran-Cong, Thanh (2007) Computation of laminated composite plates using integrated radial basis function networks. CMC: Computers, Materials and Continua, 5 (1). pp. 63-77. ISSN 1546-2218

Das Gupta, Jishu and Ziri-Castro, Karla and Suzuki, Hajime (2007) Dynamic range analysis on MIMO-OFDM broadband channels in a populated time-varying indoor environment. In: ATNAC 2007: Next Generation Networks: Enabling Closer International Cooperation, 2-5 Dec 2007, Christchurch, New Zealand.

Epaarachchi, Jayantha A. and Clegg, Richard E. and Canning, John (2007) Investigation of the use of near infrared FBG (830nm) sensors for monitoring the structural response of 0/90 woven cloth/CSM glass fibre/vynylester composite under static and fatigue loading. In: HUMS 2007: 5th DSTO International Conference on Health and Usage Monitoring , 19-22 Mar 2007, Melbourne, Australia.

Brodie, I. M. (2007) Prediction of stormwater particle loads from impervious urban surfaces based on a rainfall detachment index. Water Science and Technology, 55 (4). pp. 49-56. ISSN 0273-1223

Lu, Te-Wei and Wen, Peng (2007) Time optimal and robust control of twin rotor system. In: ICCA 2007: 6th IEEE International Conference on Control and Automation, 30 May-1 Jun 2007, Guangzhou, China.

Ku, H. and Trada, M. and Puttgunta, V. C. and Kota, V. (2007) Yield and tensile strength of vinyl ester composites cured by microwaves. Journal of Electromagnetic Waves and Applications, 21 (4). pp. 517-526. ISSN 0920-5071

Omar, T. and Van Erp, G. and Key, P. W. (2006) Stressed arch modular deployable composite shelters: concept and development. In: CICE 2006: 3rd International Conference on FRP Composites in Civil Engineering, 13-15 Dec 2006, Miami, Fl, USA.

Mai-Duy, N. and Tran-Cong, T. and Tanner, R. I. (2006) A new high-order time-kernel BIEM for the Burgers equation. CMES: Computer Modeling in Engineering and Sciences, 16 (3). pp. 177-186. ISSN 1526-1492

Cubero, Sam, ed. (2006) Industrial robotics: theory, modelling and control. Pro Literatur Verlag, Mammendorf, Germany. ISBN 3-86611-285-8

Buttsworth, David R. and Goozee, Richard J. and Jacobs, Peter A. (2006) Measurement and simulation of the interface in a low-enthalpy shock tunnel. In: 14th International Space Planes and Hypersonic Systems and Technologies Conference (AIAA/AHI 2006), 6-9 Nov 2006, Canberra, Australia.

Mokonopi, Kealeboga (2006) Balancing a two wheeled robot. [USQ Project] (Unpublished)

Napper, Bryce (2006) Computational fluid dynamics (CFD) investigation of the thermal efficiency of micro climate conditioning of a typical workstation. [USQ Project] (Unpublished)

Morgan, R. G. and McIntyre, T. J. and Jacobs, P. A. and Buttsworth, D. R. and Macrossan, M. N. and Gollan, R. J. and Capra, B. R. and Brandis, A. M. and Potter, D. and Eichmann, T. and Jacobs, C. M. and McGilvray, M. and van Diem, D. and Scott, M. P. (2006) Impulse facility simulation of hypervelocity radiating flows. In: 2nd International Workshop on Radiation of High Temperature Gases in Atmospheric Entry, 6-8 Sep 2006, Rome, Italy.

Morris, Anthony Brian (2006) Stormwater harvest and reuse for a wholesale nursery. [USQ Project] (Unpublished)

Mai-Duy, N. and Tran-Cong, T. and Tanner, R. I. (2006) A domain-type boundary-integral-equation method for two-dimensional biharmonic Dirichlet problem. Engineering Analysis with Boundary Elements, 30 (10). pp. 809-817. ISSN 0955-7997

Epaarachchi, Jayantha A. (2006) Assessment of damage accumulation in glass fibre reinforced plastic (GFRP) composites under spectrum fatigue loading. In: 2006 International Conference on Structural Integrity and Failure (SIF2006), 27-29 Sept 2006, Sydney, Australia.

Shiau, Jim S. and Lyamin, Andrei V. and Sloan, Scott W. (2006) Application of pseudo-static limit analysis in geotechnical earthquake design. In: 6th European Conference on Numerical Methods in Geotechnical Engineering, 6-8 Sep 2006, Graz, Austria.

Zhuge, Yan and Chuang, Shihwei (2006) Modelling of URM walls retrofitted with cable: a comparison between a basic mechanical model and distinct element method. Transactions of the Tianjin University, 12 (supp. ). pp. 171-176. ISSN 1006-4982

Mohammed, H. and Yusaf, T. and Salman, Y. (2006) Experimental investigation of free convection heat transfer with entrance restriction placed at top of a vertical circular tube. In: 8th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA 2006), 4-7 Jul 2006, Torino, Italy.

Mohammed, H. and Yusaf, T. (2006) Heat transfer by mixed convection opposing laminar flow from the inside surface of uniformly heated inclined circular tube. In: 8th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA 2006), 4-7 Jul 2006, Torino, Italy.

Wells, Colin G. and Ball, James A. R. (2006) Attenuation of a shielded rectangular dielectric rod waveguide. IEEE Transactions on Microwave Theory and Techniques, 54 (7). pp. 3013-3018. ISSN 0018-9480

Goozee, R. J. and Jacobs, P. A. and Buttsworth, D. R. (2006) Simulation of a complete reflected shock tunnel showing a vortex mechanism for flow contamination. Shock Waves, 15 (3-4). pp. 165-176. ISSN 0938-1287

Al-Falahi, Amir and Yusaf, T. and Yusoff, M. Z. (2006) Universiti Tenaga Nasional short duration hypersonic test facility: calibration and verification. In: 8th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA 2006), 4-7 Jul 2006, Torino, Italy.

Mai-Duy, Nam (2006) An effective spectral collocation method for the direct solution of high-order ODEs. Communications in Numerical Methods in Engineering, 22 (6). pp. 627-642. ISSN 1069-8299

Merifield, R. S. and Nguyen, V. Q. (2006) Two- and three-dimensional bearing-capacity solutions for footings on two-layered clays. Geomechanics and Geoengineering: An International Journal, 1 (2). pp. 151-162. ISSN 1748-6025

Roberts, A. J. and Li, Zhenquan (2006) An accurate and comprehensive model of thin fluid flows with inertia on curved substrates. Journal of Fluid Mechanics, 553 (1). pp. 33-73. ISSN 1469-7645

Mai-Duy, N. and Tran-Cong, T. (2006) Solving biharmonic problems with scattered-point discretization using indirect radial-basis-function networks. Engineering Analysis With Boundary Elements, 30 (2). pp. 77-87. ISSN 0955-7997

Massaro, Aaron (2006) The effect of water ratio on the mechanical properties of refactory materials. [USQ Project] (Unpublished)

Zakaria, S. and Yusaf, T. and Yusoff, M. Z. (2006) Flow and transient heat transfer in a high speed free piston tunnel: CFD simulations on turbulent and laminar flow conditions. In: 2nd International Conference on Thermal Engineering Theory and Applications (ICTEA '06), 3-6 Jan 2006, Al Ain, United Arab Emirates.

Van Gool, Bronwyn and Karunasena, W. and Sivakugan, Nagaratnam (2006) Modelling the effects of blasting on paste fill. In: 1st International Conference on Computational Methods (ICCM04), 15-17 December 2004, Singapore.

Brodie, I. M. (2006) Prediction of stormwater particle loads from impervious urban surfaces based on a rainfall detachment index. In: 7th International Conference on Urban Drainage Modelling and 4th International Conference on Water Sensitive Urban Design, 2-7 Apr 2006, Melbourne, Australia.

Finch, N. A. and Murray, P. J. and Dunn, M. T. and Billingsley, J. (2006) Using machine vision classification to control access of animals to water. Animal Production Science, 46 (6-7). pp. 837-839. ISSN 0816-1089

Billingsley, John and Dunn, Mark and Bell, David (2006) Vision based macadamia yield assessment. Sensor Review, 26 (4). pp. 312-317. ISSN 0260-2288

Ku, Harry S. and Puttgunta, V. C. and Trada, Mohan (2006) Young's modulus of vinyl ester composites cured by microwave irradiation: preliminary results. Journal of Electromagnetic Waves and Applications, 20 (14). pp. 1911-1924. ISSN 0920-5071

Liu, Hong-Yuan and Yan, Wenyi and Mai, Yiu-Wing (2006) Z-pin bridging in composite laminates and some related problems. Australian Journal of Mechanical Engineering, 3 (1). pp. 11-19.

Wandel, Andrew P. and Klimenko, Alexander Y. (2005) Testing multiple mapping conditioning mixing for Monte Carlo probability density function simulations. Physics of Fluids, 17 (12). pp. 128105-1. ISSN 1070-6631

Lokuge, Weena P. and Sanjayan, J. G. and Setunge, Sujeeva (2005) Stress-strain model for laterally confined concrete. Journal of Materials in Civil Engineering, 17 (6). pp. 607-616. ISSN 0899-1561

Ng, K. C. and Yusoff, M. Z. and Yusaf, T. F. and Hussein, I. (2005) Development status of indigenous computational fluid dynamics software for arbitrary complex geometry. Institution of Engineers, Malaysia. Journal, 66 (4). pp. 15-22. ISSN 0126-513X

Xiang, Wei and Pietrobon, Steven S. and Leis, John (2005) Exit chart analysis of parallel data convolutional codes. In: ISPACS 2005: International Symposium on Intellegent Signal Processing and Communication Systems, 13-16 Dec 2005, Hong Kong.

Mossad, Ruth and Schillak, Thomas and Malli, Mike (2005) Numerical simulation of open refrigerated display cabinets. In: 3rd International Conference on Energy Research and Development (ICERD-3), 21-23 Nov 2005, Kuwait City, Kuwait.

Ren, Yibin and Huang, Jingjing and Yang, Ke and Zhang, Bingchun and Yao, Zhiming and Wang, Hao (2005) Study of bio-corrosion of pure magnesium. Acta Metallurgica Sinica (Jinshu Xuebao), 41 (11). pp. 1228-1232. ISSN 0412-1961

Deo, Ravinesh C. and Mi, Jianchun and Nathan, Graham J. (2005) Dependence of a plane turbulent jet on its nozzle contraction profile. In: Jets, Wakes and Separated Flows: International Conference on Jets, Wakes and Separated Flows (ICJWSF), 5-8 Oct 2005, Mie, Japan.

Wells, Colin G. and Ball, James A. R. (2005) Mode-matching analysis of a shielded rectangular dielectric-rod waveguide. IEEE Transactions on Microwave Theory and Techniques, 53 (10). pp. 3169-3177. ISSN 0018-9480

Jokic, Michael D. and Longuski, James M. (2005) Artificial gravity and abort scenarios via tethers for human missions to Mars. Journal of Spacecraft and Rockets, 42 (5). pp. 883-889. ISSN 0022-4650

Sohn, J. H. and Smith, R. J. and Hudson, N. A. and Choi, H. L. (2005) Gas sampling efficiencies and aerodynamic characteristics of a laboratory wind tunnel for odour measurement. Biosystems Engineering, 92 (1). pp. 37-46. ISSN 1537-5110

Yusoff, M. Z. and Hussein, I. and Yusaf, T. and Ahmad, Z. (2005) Modeling of viscous flows in two-dimensional turbomachinery cascade via viscous-inviscid interaction method. Institution of Engineers, Malaysia. Journal , 66 (3). pp. 14-20. ISSN 0126-513X

Mai-Duy, N. and Tanner, R. I. (2005) Computing non-Newtonian fluid flow with radial basis function networks. International Journal for Numerical Methods in Fluids, 48 (12). pp. 1309-1336. ISSN 0271-2091

Mai-Duy, N. and Tanner, R. I. (2005) Solving high-order partial differential equations with indirect radial basis function networks. International Journal for Numerical Methods in Engineering, 63 (11). pp. 1636-1654. ISSN 0029-5981

Liu, Weili and Zhang, H. F. and Hu, Z. Q. and Wang, Hao (2005) Formation and mechanical properties of Mg65Cu25Er10 and Mg65Cu15Ag10Er10 bulk amorphous alloys. Journal of Alloys and Compounds, 397 (1-2). pp. 202-206. ISSN 0925-8388

Mai-Duy, Nam and Tran-Cong, Thanh (2005) An efficient indirect RBFN-based method for numerical solution of PDEs. Numerical Methods for Partial Differential Equations, 21 (4). pp. 770-790. ISSN 0749-159X

Buttsworth, David R. and Stevens, Robert and Stone, C. Richard (2005) Eroding ribbon thermocouples: impulse response and transient heat flux analysis. Measurement Science and Technology, 16 (7). pp. 1487-1494. ISSN 0957-0233

Liu, W. Y. and Zhang, H. F. and Hu, Z. Q. and Wang, H. and Yao, X. D. (2005) Fabrication of bulk amorphous Mg65Cu25Gd10 alloy of 12mm rod by water quenching. In: Magnesium – Science, Technology and Applications. Trans Tech Publications Inc., Zurich, Switzerland, pp. 211-214. ISBN 978-087849968-7

Wang, Hao and Song, Xiaoping and Yao, Xiangdong and Zhang, Haifeng and Hu, Zhuangqui (2005) Crystallization behavior of (Cu60Zr30Ti10)99Sn1 bulk metallic glass. Journal of Materials Science & Technology, 21 (s 1). pp. 51-53. ISSN 1005-0302

Mi, Jianchun and Deo, Ravinesh C. and Nathan, Graham J. (2005) Fast-convergent iterative scheme for filtering velocity signals and finding Kolmogorov scales. Physical Review E: Statistical, Nonlinear and Soft Matter Physics, 71 (6). pp. 1-5. ISSN 1539-3755

Yao, X. and Wu, C. Z. and Wang, H. and Cheng, H. M. and Lu, G. Q. Max (2005) Hydrogen storage of magnesium-based nanocomposites system. Journal of Materials Science & Technology, 21 (s 1). pp. 57-60. ISSN 1005-0302

Ng, K. C. and Yusoff, M. Z. and Yusaf, T. F. (2005) Numerical computation of high speed turbulent flow using coupled solution technique with standard K-epsilon turbulence model. Journal of Mechanical Engineering, 2 (1). pp. 79-92. ISSN 1823-5514

Mi, J. and Deo, R. C. and Nathan, G. J. (2005) Characterization of turbulent jets from high-aspect-ratio rectangular nozzles. Physics of Fluids, 17 (6). pp. 1-4. ISSN 1070-6631

Perera, Kithsiri and Herath, Srikantha (2005) Detecting tsunami damage from satellite data in Sri Lanka. Asian Journal of Geoinformatics, 5 (2). pp. 38-44. ISSN 1513-6728

Fu, H. M. and Zhang, H. F. and Wang, Hao and Zhang, Qingsheng and Hu, Z. Q. (2005) Synthesis and mechanical properties of Cu-based bulk metallic glass composites containing in-situ TiC particles. Scripta Materialia, 52 (7). pp. 669-673. ISSN 1359-6462

Mai-Duy, N. and Tanner, R. I. (2005) An effective high order interpolation scheme in BIEMs for biharmonic boundary value problems. Engineering Analysis with Boundary Elements, 29 (3). pp. 210-223. ISSN 0955-7997

Epaarachchi, Jayantha A. (2005) Effects of static fatigue on the tension-tension fatigue life of glass / polyester composites. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005): Advances in Applied Mechanics, 16-18 Feb 2005, Melbourne, Australia.

Khennane, Amar and Melchers, Robert E. (2005) A meso-scale finite element model for environmental stress corrosion of GFRP. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005): Advances in Applied Mechanics, 16-18 Feb 2005, Melbourne, Australia.

Mai-Duy, Nam (2005) Solving high order ordinary differential equations with radial basis function networks. International Journal for Numerical Methods in Engineering, 62 (6). pp. 824-852. ISSN 0029-5981

University of Southern Queensland (2005) Method and apparatus for measuring electrical conductivity. 2005205611.

Li, Yan and Wen, Peng (2005) An ensemble learning algorithm for blind signal separation problem. In: 2005 International Conference on Computational Intelligence for Modelling, Control and Automation (CIMCA 2005), 28- 30 Nov 2005, Vienna, Austria .

Ku, Harry S. and Siores, Elias and Ball, James A. R. (2005) Application of variable frequency microwave (VFM) to adhesives. Journal of Electromagnetic Waves and Applications, 19 (11). pp. 1467-1484. ISSN 0920-5071

Wang, Hao (2005) Controlled nucleation method: a new process for semisolid metal forming. Special Casting and Non-ferrous Alloys (Tezhong Zhuzao Ji Youse Hejin) . pp. 195-200. ISSN 1001-2249

Frost, Benjamin and Cubero, Samuel Nacion (2005) Development of a 3D laser scanner for guiding a six-legged walking robot. In: 12th Annual Conference on Mechatronics and Machine Vision in Practice , 29 Nov - 1 Dec 2005, Manila, Philippines.

Wen, Peng and Kidd, Jason G. (2005) Electronic height indicatior for agricultural machines. Australian Journal of Electrical and Electronics Engineering, 2 (1). pp. 13-20. ISSN 1448-837X

Ziemski, Marcin and Whitty, Stephen Jonathan (2005) Engineering project management: doing not teaching. In: ICEE 2005: Global Education Interlink, 25-29 Jul 2005, Gliwice, Poland.

Xiang, Wei and Leis, John W. (2005) EXIT chart analysis of iteratively decodable source codes for wireless multimedia communications. In: DSPCS/WITSP 2005: 4th Workshop on the Internet, Telecommunications and Signal Processing (WITSP2005), 19-21 Dec 2005, Noosa, Australia.

Deo, Ravinesh C. (2005) Experimental investigations of the influence of Reynolds number and boundary conditions on a plane air jet. [Thesis (PhD/Research)]

Billingsley, John, ed. (2005) Mechatronics and machine vision 2005. Robotics and Mechatronics . Research Studies Press, Hertfordshire, England. ISBN 9781604236149

Yao, Xiangdong and Wang, Hao and He, B. and Zhou, X. (2005) Modeling of columnar-to-equiaxed transition in solidified Al-Si alloys. In: 5th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 5), 2-5 Nov 2004, Beijing, China.

Zhuge, Y. and Chuang, S. W. (2005) Seismic retrofitting of unreinforced masonry buildings - a literature review. Australian Journal of Structural Engineering, 6 (1). pp. 25-36. ISSN 1328-7982

Ng, K. C. and Yusoff, M. Z. and Yusaf, T. F. (2005) Simulations of two-dimensional high speed turbulent compressible flow in a diffuser and a nozzle blade cascade. American Journal of Applied Sciences, 2 (9). pp. 1325-1330. ISSN 1546-9239

Wilcox, Colin and McDougall, Kevin (2005) The private surveyor as a spatial data custodian in the local community. In: 2005 Spatial Sciences Institute Biennial Conference: Spatial Intelligence, Innovation and Praxis (SSC2005), 12-16 Sep 2005, Melbourne, Australia.

Billingsley, John and Dunn, Mark (2005) Unusual vision - machine vision applications at the NCEA. Sensor Review, 25 (3). pp. 202-208. ISSN 0260-2288

McDougall, Kevin and Rajabifard, Abbas and Williamson, Ian (2005) What will motivate local governments to share spatial information? In: 2005 Spatial Sciences Institute Biennial Conference: Spatial Intelligence, Innovation and Praxis (SSC2005), 12-16 Sep 2005, Melbourne, Australia.

Deo, R. C. and Mi, J. and Nathan, G. J. (2004) An investigation of the influence of nozzle aspect ratio on the velocity field of turbulent plane jet. In: 15th Australasian Fluid Mechanics Conference (AFMC 2004), 13-17 Dec 2004, Sydney, Australia.

Dai, Shao-Cong and Yan, Wenyi and Liu, Hong-Yuan and Mai, Yiu-Wing (2004) Experimental study on z-pin bridging law by pullout test. Composites Science and Technology, 64 (16). pp. 2451-2457. ISSN 0266-3538

Mai-Duy, Nam and Tran-Cong, Thanh (2004) An effective RBFN-boundary integral approach for the analysis of natural convection flow. International Journal for Numerical Methods in Fluids, 46 (5). pp. 545-568. ISSN 0271-2091

Wells, Colin G. and Ball, James A. R. (2004) Gap capacitance of a coaxial resonator using simplified mode matching. IEE Proceedings : Microwaves, Antennas and Propagation, 151 (5). pp. 399-403. ISSN 1350-2417

Masters, Jason Scott (2004) GIS based cadastral planning. [USQ Project] (Unpublished)

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2004) Constitutive model for confined high strength concretes subjected to cyclic loading. Journal of materials in Civil Engineering, 16 (4). pp. 297-305. ISSN 0899-1561

Xiang, Wei and Fok, Sai Cheong and Thimm, Georg (2004) Agent-based composable simulation for virtual prototyping of fluid power system. Computers in Industry, 54 (3). pp. 237-251. ISSN 0166-3615

Mai-Duy, N. and Tran-Cong, T. (2004) Boundary integral-based domain decomposition technique for solution of Navier Stokes equations. CMES: Computer Modeling in Engineering and Sciences, 6 (1). pp. 59-75. ISSN 1526-1492

Buttsworth, David R. and Jones, Terry V. (2004) Transient temperature probe measurements in a Mach 4 nitrogen jet. Experiments in Fluids, 37 (1). pp. 137-145. ISSN 0723-4864

Elawad, Mohamed and Yusaf, Talal (2004) Performance and exhaust emission of a diesel engine using crude palm oil as a fuel extender. Journal of Energy & Environment , 3. pp. 61-68. ISSN 1563-1362

Tran, Canh-Dung and Tran-Cong, Thanh (2004) Element-free simulation of dilute polymeric flows using Brownian configuration fields. Korea-Australia Rheology Journal, 16 (1). pp. 1-15. ISSN 1226-119X

Zhuge, Yan and Jin, Feng and Hunt, Suzanne P. (2004) The prediction of damage to masonry houses caused by foundation movements. Advances in Structural Engineering, 7 (1). pp. 81-93. ISSN 1369-4332

Cubero, Samuel Nacion (2004) A general purpose inverse kinematics algorithm for all manipulators. In: 11th Annual Conference on Mechatronics and Machine Vision in Practice, 28 Nov - 3 Dec 2004 , Macau, China. (In Press)

Epaarachchi, Jayantha A. and Clausen, Philip D. (2004) Accelerated full scale fatigue testing of a small composite wind turbine blade using a mechanically operated test rig. In: 2004 Structural Integrity and Fracture International Conference (SIF2004), 26-29 Sept 2004, Brisbane, Australia.

Mai-Duy, N. and Tanner, R. I. (2004) An efficient BEM for numerical solution of the biharmonic boundary value problem. In: International Conference on Computational and Experimental Engineering & Sciences (ICCES 2004): Advances in Computational & Experimental Engineering & Sciences , 26-29 Jul 2004, Madeira, Portugal.

Bhaskaran, Sunil and Datt, Bisun and Forster, Bruce and Neal, Trevor (2004) Evaluation of spaceborne and airborne hyperspectral data for mapping urban areas. In: 12th Australasian Remote Sensing and Photogrammetry Conference (ARSPC 2004): To Measure is to Manage, 18-22 Oct 2004, Fremantle, Australia.

Mai-Duy, Nam (2004) Indirect RBFN method with scattered points for numerical solution of PDEs. CMES: Computer Modeling in Engineering and Sciences, 6 (2). pp. 209-226. ISSN 1526-1492

Billingsley, John and Withers, Kerry (2004) Measuring the density of dingo teeth with machine vision. Sensor Review, 24 (4). pp. 361-363. ISSN 0260-2288

Ouyang, L. Z. and Wang, Hao and Zhu, M. and Zou, Jin and Chung, C. Y. (2004) Microstructure of MmM5/Mg multi-layer hydrogen storage films prepared by magnetron sputtering. Microscopy Research and Technique, 64 (4). pp. 323-329. ISSN 1059-910X

Mai-Duy, Nam and Tanner, Roger I. (2004) Numerical analysis of corrugated tube flow using RBFNs. In: 14th International Congress on Rheology, 22-27 Aug 2004, Seoul, Korea.

Norman, Mark and Leis, John (2004) Student-accessible tools and techniques to aid in teaching network protocols. In: AaeE 2004: Creating Flexible Learning Environments, 27-29 Sep 2009, Toowoomba, Australia.

McIlvenna, Paul and Mossad, Ruth (2003) Two dimensional transfer chute analysis using a continuum method. In: 3rd International Conference on Computational Fluid Dynamics in the Minerals and Process Industries (CFD 2003), 10-12 Dec 2003, Melbourne, Australia.

Ku, H. (2003) Curing vinyl ester particle-reinforced composites using microwaves. Journal of Composite Materials, 37 (22). pp. 2027-2042. ISSN 0021-9983

Billingsley, John, ed. (2003) Mechatronics and machine vision 2003: future trends. Robotics and Mechatronics , 5 . Research Studies Press, Taunton, England. ISBN 0863802907; 9780863802904

Khennane, Amar and Melchers, Robert E. (2003) Meso-scale finite element investigation into the short and long term strengths of glass fibre reinforced composites. Technical Report. University of Southern Queensland, Toowoomba, Australia.

Merifield, Richard S. and Sloan, Scott W. and Lyamin, Andrei V. (2003) The stability of inclined plate anchors in purely cohesive soil. Technical Report. University of Southern Queensland, Toowoomba, Australia.

Merifield, Richard S. and Sloan, Scott W. and Lyamin, Andrei V. (2003) Three dimensional lower bound solutions for the stability of plate anchors in sand. Technical Report. University of Southern Queensland, Toowoomba, Australia.

Ku, H. S. and Siu, F. and Siores, E. and Ball, J. A. R. (2003) Variable frequency microwave (VFM) processing facilities and application in processing thermoplastic matrix composites. Journal of Materials Processing Technology, 139 (1-3 S). pp. 291-295. ISSN 0924-0136

Yan, Wenyi and Wang, Chun Hui and Zhang, Xin Ping and Mai, Yiu-Wing (2003) Theoretical modelling of the effect of plasticity on reverse transformation in superelastic shape memory alloys. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing , 354 (1-2). pp. 146-157. ISSN 0921-5093

Lokuge, Weena and Setunge, Sujeeva and Sanjayan, J. G. (2003) Modelling eccentrically loaded high-strength concrete columns. Magazine of Concrete Research, 55 (4). pp. 331-341. ISSN 0024-9831

Yan, Wenyi and Liu, Hong-Yuan and Mai, Yiu-Wing (2003) Numerical study on the mode I delamination toughness of z-pinned laminates. Composites Science and Technology, 63 (10). pp. 1481-1493. ISSN 0266-3538

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2003) Triaxial test results of high-strength concrete subjected to cyclic loading. Magazine of Concrete Research, 55 (4). pp. 321-329. ISSN 0024-9831

Buttsworth, David R. and Jones, Terry V. (2003) Concentration probe measurements in a Mach 4 nonreacting hydrogen jet. Journal of Fluids Engineering, 125 (4). pp. 628-635. ISSN 0098-2202

Bhaskaran, Sunil and Datt, Bisun (2003) Processing airborne, spaceborne hyperspectral and GIS data in urban areas. In: IEEE International Geoscience and Remote Sensing Symposium (IGARSS 2003), 21-25 Jul 2003, Toulouse, France.

Khennane, Amar and Melchers, Robert E. (2003) Durability of glass polymer composites subject to stress corrosion. Journal of Composites for Construction, 7 (2). pp. 109-117. ISSN 1090-0268

Zhuge, Yan and Hunt, Suzanne P. (2003) Numerical simulation of masonry shear panels with distinct element approach. Structural Engineering and Mechanics, 15 (4). pp. 477-493. ISSN 1225-4568

Buttsworth, David R. and Jones, Terry V. (2003) High bandwidth stagnation temperature measurements in a Mach 6 gun tunnel flow. Experimental Thermal and Fluid Science, 27 (2). pp. 177-186. ISSN 0894-1777

Chen, Guangnan and Baker, Graham (2003) An energy model for bifurcation analysis of a double-notched concrete panel: continuum model. Advances in Structural Engineering, 6 (1). pp. 45-51. ISSN 1369-4332

Yusaf, Talal and Buttsworth, David R. and Deeth, Hilton C. (2003) Heat transfer in an ultrasonic processing cell: preliminary measurements. Emirates Journal of Agricultural Sciences , 15 (2). pp. 80-86. ISSN 1021-1357

Mai-Duy, N. and Tran-Cong, T. (2003) Indirect RBFN method with thin plate splines for numerical solution of differential equations. CMES Computer Modeling in Engineering and Sciences, 4 (1). pp. 85-102. ISSN 1526-1492

Ku, Harry S. and Siores, Elias and Ball, James A. R. and Taube, Alex and Siu, Fred (2003) Lap shear strength comparison between different random glass fibre reinforced thermoplastic matrix composites bonded by adhesives using variable frequency microwaves (VFM) irradiation. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 217 (1). pp. 65-75. ISSN 1464-4207

Warnest, Mathew and McDougall, Kevin and Rajabifard, Abbas and Williamson, Ian (2003) Local and state-based collaboration: the key to unlocking the potential of SDI. In: Spatial Sciences Institute Biennial Conference (SSC 2003): Spatial Knowledge Without Boundaries , 22-26 Sep 2003, Canberra, Australia.

Roberts, A. J. (2003) Low-dimensional modelling of dynamical systems applied to some dissipative fluid mechanics. In: Nonlinear dynamics from lasers to butterflies: selected lectures from the 15th Canberra International Physics Summer School. Lecture Notes in Complex Systems (1). World Scientific, pp. 257-313. ISBN 9789812791252

Li, Yan and Wen, Peng and Powers, David (2003) Methods for the blind signal separation problem. In: ICNNSP 2003: International Conference on Neural Networks and Signal Processing , 14-17 Dec 2003 , Nanjing, China.

Wang, Hao (2003) Present status and future trends in production of semisolid materials. Tezhong Zhuzao Ji Youse Hejin (Special Casting and Nonferrous Alloys), 131. pp. 332-334. ISSN 1001-2249

Chandler, Owen and Apan, Armando and Pullinger, Rod and Bullen, Ken (2003) Quantifying hail damage for crop loss assessment: techniques using remote sensing and geographic information systems. In: 11th Australasian Remote Sensing and Photogrammetry Conference (ARSPC 2002): Images to Information, 2-6 Sep 2002, Brisbane, Australia.

Bullen, Frank (2003) Use of coral-derived aggregates for construction of low-volume roads. Transportation Research Record: Journal of the Transportation Research Board , 1819. pp. 134-142. ISSN 0361-1981

Buttsworth, David R. (2002) Transient response of an erodable heat flux gauge using finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216 (8). pp. 701-716. ISSN 0954-4070

Ku, H. S. and Siu, F. and Siores, E. and Ball, J. A. R. (2002) Applications of fixed and variable frequency microwave (VFM) facilities in polymeric materials processing and joining. In: 2nd World Engineering Congress (WEC 2002), 22-25 Jul 2002, Kuching, Malaysia.

Ku, H. S. and Siu, F. and Mok, P. L. and Siores, E. and Ball, J. A. R. (2002) Characterisation of chip-on-board (COB) encapsulate epoxies used in the printed circuit board assembly (PCBA) industry using variable frequency microwave (VFM) facilities. In: 2nd World Engineering Congress (WEC 2002), 22-25 Jul 2002, Sarawak, Malaysia.

Buttsworth, David R. (2002) Heat transfer during transient compression: measurements and simulations. Shock Waves, 12 (1). pp. 87-91. ISSN 0938-1287

Buttsworth, David R. and Jacobs, Peter A. and Jones, Terry V. (2002) Simulation of Oxford University gun tunnel performance using a quasi-one-dimensional model. Shock Waves, 11 (5). pp. 377-383. ISSN 0938-1287

Roy, R. Valery and Roberts, A. J. and Simpson, M. E. (2002) A lubrication model of coating flows over a curved substrate in space. Journal of Fluid Mechanics, 454 (1). pp. 235-261. ISSN 0022-1120

Yan, Wenyi and O'Dowd, Noel P. and Busso, Esteban P. (2002) Numerical study of sliding wear caused by a loaded pin on a rotating disc. Journal of the Mechanics and Physics of Solids, 50 (3). pp. 449-470. ISSN 0022-5096

Tran, Canh-D. and Tran-Cong, T. (2002) BEM-NN computation of generalised Newtonian flows. Engineering Analysis with Boundary Elements, 26 (1). pp. 15-28. ISSN 0955-7997

McCarthy, Stuart and Billingsley, John (2002) A sensor for the sugar cane harvester topper. Sensor Review, 22 (3). pp. 242-246. ISSN 0260-2288

Tran-Cong, T. and Mai-Duy, N. and Phan-Thien, N. (2002) BEM-RBF approach for viscoelastic flow analysis. Engineering Analysis with Boundary Elements, 26 (9). pp. 757-762. ISSN 0955-7997

Tran, Canh-Dung and Tran-Cong, Thanh (2002) Computation of viscoelastic flow using neural networks and stochastic simulation. Korea-Australia Rheology Journal, 14 (4). pp. 161-174. ISSN 1226-119X

McDougall, Kevin and Rajabifard, Abbas and Williamson, Ian (2002) From little things big things grow: building the SDI from local government up. In: Joint AURISA and 3rd Trans Tasman Surveyors Conference (AURISA 2002): e-Future: into the Mainstream, 25-30 Nov 2002, Adelaide, Australia.

Sharifian, S. A. and Buttsworth, D. R. (2002) Reducing the mechanical hysteresis problem in optically-addressed diaphragm pressure sensors. In: SPIE 2002: Vibration Measurements by Laser Techniques: Advances and Applications, 18-21 June 2002, Ancona, Italy.

Moore, K. A. and Power, R. K. (2002) Safe buffer distances for offstream earth dams. Australian Journal of Water Resources, 6 (1). pp. 1-15. ISSN 1324-1583

Buttsworth, David R. (2001) Assessment of effective thermal product of surface junction thermocouples on millisecond and microsecond time scales. Experimental Thermal and Fluid Science, 25 (6). pp. 409-420. ISSN 0894-1777

Sharifian, S. A. and Buttsworth, D. R. (2001) Optically addressed pressure sensors for transient gas dynamics: calibration of a preliminary design. In: 14th Australasian Fluid Mechanics Conference (AFMC 2001) , 9-14 Dec 2001, Adelaide, South Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2001) Numerical solution of Navier-Stokes equations using multiquadric radial basis function networks. International Journal for Numerical Methods in Fluids, 37 (1). pp. 65-86. ISSN 0271-2091

Ku, H. S. and Siu, F. and Siores, E. and Ball, J. A. R. (2001) Applications of microwaves in non-destructive testing. In: 10th Asia Pacific Conference on Non-Destructive Testing (2001), 17-21 Sep 2001, Brisbane, Australia.

Davey, Scott W. and Van Erp, Gerard M. and Marsh, Roy (2001) Fibre composite bridge decks: an alternative approach. Composites Part A: Applied Science and Manufacturing, 32 (9). 1339 - 1343. ISSN 1359-835X

Ku, H. S. and Siu, F. and Siores, E. and Ball, J. A. R. and Blicblau, A. S. (2001) Applications of fixed and variable frequency microwave (VFM) facilities in polymeric materials processing and joining. In: 5th Asia Pacific Conference on Materials Processing, 25 Jun 2001, Seoul, Korea.

Tran-Cong, T. and Mai-Duy, N. and Phan-Thien, N. (2001) BEM-RBF approach for viscoelastic flow analysis. In: 23rd International Conference on the Boundary Element Method (BEM 2001), 7-9 May 2001, Lemnos, Greece.

Simmons, Shane (1999) The application of discounted cash flow for land development projects. In: 18th AIMS National Surveying Conference (Survey 1999): Surveying Together into the New Millennium, 6-9 Oct 1999, Sunshine Coast, Australia.

Buttsworth, D. R. and Elston, S. J. and Jones, Terry V. (1998) Directional sensitivity of skin friction measurements using nematic liquid crystal. Measurement Science and Technology, 9 (11). pp. 1856-1865. ISSN 0957-0233

Buttsworth, D. R. and Elston, S. J. and Jones, T. V. (1998) Direct full surface skin friction measurement using nematic liquid crystal techniques. Journal of Turbomachinery, 120 (4). pp. 847-853. ISSN 0889-504X

Parisi, A. V. and Wong, J. C. F. and Randall, C. (1998) Simultaneous assessment of photosynthetically active and ultraviolet solar radiation. Agricultural and Forest Meteorology, 92 (2). pp. 97-103. ISSN 0168-1923

University of Southern Queensland (1998) Vehicle guidance system. AU-B-39747/95.

Tilley, P. A. (1998) Design and documentation deficiency and its impact on steel construction. Steel Construction , 32 (1). ISSN 0049-2205

Buttsworth, D. R. and Morgan, R. G. and Jones, Terry V. (1997) Experiments on oblique shock interactions with planar mixing regions. AIAA Journal, 35 (11). pp. 1774-1777. ISSN 0001-1452

Nguyen-Thien, T. and Tran-Cong, T. and Phan-Thien, N. (1997) An improved boundary element method for analysis of profile polymer extrusion. Engineering Analysis with Boundary Elements, 20 (1). pp. 81-89. ISSN 0955-7997

Billingsley, J. and Schoenfisch, M. (1997) The successful development of a vision guidance system for agriculture. Computers and Electronics in Agriculture, 16 (2). pp. 147-163. ISSN 0168-1699

McGrath, S. K. (1986) The public image of the engineering profession. In: Engineering Conference 1986: Engineers as Managers, 14-18 Apr 1986, Adelaide, Australia.

This list was generated on Sun Oct 26 01:24:05 2014 EST.