|Up a level|
Wang, Xin and Fan, Jintu (2014) Use of aluminum-coated interlayers to develop a cold-protective fibrous assembly. Journal of Applied Polymer Science, 131 (9). ISSN 0021-8995
du Preez, M. and Wandel, Andrew P. (2013) Direct numerical simulations of passive scalars: effect of initial mixture fraction distribution on timescales. In: 7th Australian Combustion Symposium (ACS 2013), 6-8 Nov 2013, Perth, Australia.
Buttsworth, David and Morgan, Richard and Jenniskens, Peter (2013) Near-ultraviolet emission spectroscopy of the Hayabusa reentry. Journal of Spacecraft and Rockets, 50 (6). pp. 1109-1120. ISSN 0022-4650
Gharehghani, A. and Koochak, M. and Mirsalim, M. and Yusaf, Talal (2013) Experimental investigation of thermal balance of a turbocharged SI engine operating on natural gas. Applied Thermal Engineering, 60 (1/2). pp. 200-207. ISSN 1359-4311
AL-Khaffajy, Marwaan and Mossad, Ruth (2013) Optimization of the heat exchanger in a flat plate indirect heating integrated collector storage solar water heating system. Renewable Energy, 57. pp. 413-421. ISSN 0960-1481
Ku, Harry and Cardona, Francisco and Jamal Eddine, Mustapha (2013) Thermal properties of calcium carbonate powder reinforced vinyl ester composites: pilot study. Journal of Applied Polymer Science , 127 (4). pp. 2996-3001. ISSN 0021-8995
Wandel, Andrew P. (2013) Extinction predictors in turbulent sprays. Proceedings of the Combustion Institute, 34 (1). pp. 1625-1632. ISSN 1540-7489
Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) Mild combustion: a technical review towards open furnace combustion. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.
Agrira, Abdalla Ibrahim Abuniran (2012) Internal combustion engine heat transfer-transient thermal analysis. [Thesis (PhD/Research)] (Unpublished)
Eichmann, T. N. and Khan, R. and McIntyre, T. J. and Jacobs, C. and Porat, H. and Buttsworth, D. and Upcroft, B. (2012) Radiometric temperature analysis of the Hayabusa spacecraft re-entry. In: 28th International Symposium on Shock Waves (ISSW 28), 17-22 Jul 2011, Manchester, United Kingdom.
Buttsworth, David and Jacobs, Peter and Potter, Daniel and Mudford, Neil and D'Souza, Mary and Eichmann, Troy and Jenniskens, Peter and McIntyre, Tim and Jokic, Michael and Jacobs, Carolyn and Upcroft, Ben and Khan, Razmi and Porat, Hadas and Neely, Andrew and Lohle, Stefan (2012) Super-orbital re-entry in Australia: laboratory measurement, simulation and flight observation [Keynote lecture]. In: ISSW28: 28th International Symposium on Shock Waves, 17-22 Jul 2011, Manchester, United Kingdom.
Al-Falahi, Amir and Yusoff, M. Z. and Yusaf, Talal and Ahmed, Diyar I. (2012) Numerical investigation of flow instability in shock tube due to shock wave-contact surface interactions. International Journal of Numerical Methods for Heat and Fluid Flow, 22 (3). pp. 377-398. ISSN 0961-5539
Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2012) Local moving least square - one-dimensional IRBFN technique: part 1 - natural convection flows in concentric and eccentric annuli. CMES: Computer Modeling in Engineering and Sciences, 83 (3). pp. 275-310. ISSN 1526-1492
Buttsworth, David and Jacobs, P. and Morgan, R. G. and Jenniskens, Peter (2012) Near ultraviolet emission spectroscopy of the Hayabusa re-entry. In: 50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition (AIAA 2012): Advancing the Science of Flight Technology, 9-12 Jan 2012, Nashville, TN. United States.
Shiau, Jim S. (2011) A shakedown limit under Hertz contact pressure. In: 2011 International Conference on Advanced Engineering Materials and Technology (AEMT 2011), 29-31 Jul 2011, Sanya, China.
Malpress, Ray (2011) Spark ignition internal combustion engine efficiency improvement - a variable compression ratio option. [Thesis (PhD/Research)] (Unpublished)
Buttsworth, David R. and Agrira, Abdalla and Malpress, Ray and Yusaf, Talal (2011) Simulation of instantaneous heat transfer in spark ignition internal combustion engines: unsteady thermal boundary layer modeling. Journal of Engineering for Gas Turbines and Power , 133 (2). pp. 1-5. ISSN 0742-4795
Khan, Razmi and Eichmann, Troy and Buttsworth, David and Upcroft, Ben (2011) Image-based visual servoing for the super-orbital re-entry of Hayabusa spacecraft. In: 2011 Australasian Conference on Robotics and Automation (ACRA 2011) , 7-9 Dec 2011, Melbourne, Australia.
Sharifian, Ahmad and Buttsworth, David (2010) Double-layered metal mesh screens to contain or exclude thermal radiation from bush fires. Journal of Fire Protection Engineering, 20 (4). pp. 291-311. ISSN 1042-3915
Tai, Ping (2010) Dielectric, thermal and mechanical properties of sawdust reinforced epoxy composites post-cured in microwaves. [USQ Project] (Unpublished)
Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275
Li, Qiang and Yu, Baoyi and Zhang, Huawen and Li, Runxia and Wang, Feng and Xie, Shuisheng and Huang, Guojie and Wang, Hao (2010) Cellular automaton modeling of semisolid microstructure formation. China Foundry, 7 (2). pp. 143-148. ISSN 1672-6421
Le, Phong B. H. and Rabczuk, Timon and Mai-Duy, Nam and Tran-Cong, Thanh (2010) A moving IRBFN-based Galerkin meshless method. CMES: Computer Modeling in Engineering and Sciences, 66 (1). pp. 25-52. ISSN 1526-1492
Le, Phong B. H. and Rabczuk, Timon and Mai-Duy, Nam and Tran-Cong, Thanh (2010) A moving IRBFN-based integration-free meshless method. CMES: Computer Modeling in Engineering and Sciences, 61 (1). pp. 63-109. ISSN 1526-1492
Widodo, A. and Buttsworth, D. (2009) Deduction of temperature fluctuations in transient compression wind tunnels using incompressible turbulent flow data. In: 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability (ICEE 2009), 7-8 Dec 2009, Malacca, Malaysia.
Agrira, Abdalla and Buttsworth, David R. and Yusaf, Talal (2009) Instantaneous heat flux simulation of S.I. engines: comparison of unsteady thermal boundary layer modelling with experimental data. In: 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability (ICEE 2009), 7-8 Dec 2009, Malacca, Malaysia.
Buttsworth, David R. and Saleh, Khalid and Yusaf, Talal (2009) Discrete particle simulation for the initial stages of ice accretion in aircraft engines: initial model development. In: 3rd International Conference on Energy and Environment (ICEE 2009), 7-8 December 2009, Malacca, Malaysia.
Wang, Hao and Ning, Zhiliang and Liang, W. Z. and Cao, Fuyang and Sun, Jianfei (2009) Microstructure and properties of Mg-Nd-Zn-Zr alloys. In: 4th International Light Metals Technology Biennial Conference (LMT2009), 29 June - 1 July 2009, Gold Coast, Australia.
Mossad, Ruth (2009) Optimization of the ventilation system for a forced ventilation piggery. Journal of Green Building, 4 (4). pp. 113-133. ISSN 1552-6100
Ku, H. and Cardona, F. and Ball, J. and Jacobson, W. and Trada, M. (2008) Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study. Journal of Composite Materials, 42 (19). pp. 2083-2095. ISSN 0021-9983
Al-Falahi, Amir and Yusaf, T. and Yusoff, M. Z. (2007) Experimental and CFD study of the effects of design parameters on Reynolds number in a short duration hypersonic test facility. In: EPMESC X: Enhancement and Promotion of Computational Methods in Engineering and Science X, 21-23 Aug 2006, Sanya, China.
Sharifian, Ahmad and Buttsworth, David R. (2007) Computational simulation of the wind-force on metal meshes. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.
Al-Falahi, Amir and Yusoff, M. Z. and Yusaf, T. (2007) Numerical and experimental study to evaluate the performance of Universiti Tenaga Nasional short duration hypersonic test facility. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.
Le, Phong and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2007) A numerical study of strain localization in elasto-thermo-viscoplastic materials using radial basis function networks. Computers, Materials and Continua, 5 (2). pp. 129-150. ISSN 1546-2218
Buttsworth, David R. and Goozee, Richard J. and Jacobs, Peter A. (2006) Measurement and simulation of the interface in a low-enthalpy shock tunnel. In: 14th International Space Planes and Hypersonic Systems and Technologies Conference (AIAA/AHI 2006), 6-9 Nov 2006, Canberra, Australia.
Mohammed, H. and Yusaf, T. and Salman, Y. (2006) Experimental investigation of free convection heat transfer with entrance restriction placed at top of a vertical circular tube. In: 8th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA 2006), 4-7 Jul 2006, Torino, Italy.
Mohammed, H. and Yusaf, T. (2006) Heat transfer by mixed convection opposing laminar flow from the inside surface of uniformly heated inclined circular tube. In: 8th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA 2006), 4-7 Jul 2006, Torino, Italy.
Yousif, B. F. and El-Tayeb, N. S. M. and Yusaf, Talal (2006) The effects of load and velocity on friction and interface temperature of CGRP sliding against smooth stainless steel. In: 8th Biennial ASME Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Italy.
Yusaf, T. F. and Fong, S. F. and Yusoff, M. Z. and Hussein, I. (2005) Modeling of transient heat flux in spark ignition engine during combustion and comparisons with experiments. American Journal of Applied Sciences, 2 (10). pp. 1438-1444. ISSN 1546-9239
Buttsworth, David R. and Stevens, Robert and Stone, C. Richard (2005) Eroding ribbon thermocouples: impulse response and transient heat flux analysis. Measurement Science and Technology, 16 (7). pp. 1487-1494. ISSN 0957-0233
Ku, Harry S. and Siores, Elias and Ball, James A. R. (2005) Application of variable frequency microwave (VFM) to adhesives. Journal of Electromagnetic Waves and Applications, 19 (11). pp. 1467-1484. ISSN 0920-5071
Mai-Duy, Nam and Tran-Cong, Thanh (2004) An effective RBFN-boundary integral approach for the analysis of natural convection flow. International Journal for Numerical Methods in Fluids, 46 (5). pp. 545-568. ISSN 0271-2091
Yusaf, Talal and Buttsworth, David R. and Deeth, Hilton C. (2003) Heat transfer in an ultrasonic processing cell: preliminary measurements. Emirates Journal of Agricultural Sciences , 15 (2). pp. 80-86. ISSN 1021-1357
Buttsworth, David R. (2002) Transient response of an erodable heat flux gauge using finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216 (8). pp. 701-716. ISSN 0954-4070
Buttsworth, David R. (2002) Heat transfer during transient compression: measurements and simulations. Shock Waves, 12 (1). pp. 87-91. ISSN 0938-1287
Sharifian, S. A. and Buttsworth, D. R. (2001) Optically addressed pressure sensors for transient gas dynamics: calibration of a preliminary design. In: 14th Australasian Fluid Mechanics Conference (AFMC 2001) , 9-14 Dec 2001, Adelaide, South Australia.
Mossad, Ruth (2001) Numerical modelling of air temperature and velocity in a forced and free ventilation piggery. In: ASME International Mechanical Engineering Congress and Exposition, 11 - 16 Nov 2001, New York, USA.