Browse by Fields of Research (ANZSRC 2008)

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Number of items at this level: 112.

Ong, Hwai Chyuan and Masjuki, H. H. and Mahlia, T. M. I. and Silitonga, A. S. and Chong, W. T. and Yusaf, Talal (2014) Engine performance and emissions using Jatropha curcas, Ceiba pentandra and Calophyllum inophyllum biodiesel in a CI diesel engine. Energy, 69. pp. 427-445. ISSN 0360-5442

Azad, Abul Kalam and Rasul, Mohammad Golam and Yusaf, Talal (2014) Statistical diagnosis of the best weibull methods for wind power assessment for agricultural applications. Energies, 7 (5). pp. 3056-3085.

Ho, Thinh X. (2014) A three-dimensional model for transient performance of a solid oxide fuel cell. International Journal of Hydrogen Energy, 39 (12). pp. 6680-6688. ISSN 0360-3199

Hairuddin, Abdul Aziz (2014) Implementation of conditional moment closure in a zero-dimensional model for HCCI engines and comparison with experiment. [Thesis (PhD/Research)] (Unpublished)

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. (2013) Design and development of mild combustion burner. Journal of Mechanical Engineering and Sciences, 5. pp. 662-676. ISSN 2289-4659

Wandel, Andrew P. (2013) Mixture fraction probability density functions in sparse spray flames with spark ignition. In: 7th Australian Combustion Symposium (ACS 2013), 6-8 Nov 2013, Perth, Australia .

Yusaf, Talal (2013) Experimental study of microorganism disruption using shear stress. Biochemical Engineering Journal, 79. pp. 7-14. ISSN 1369-703X

Helwig, Andreas and Ahfock, Tony (2013) Extending SWER line capacity. In: 23rd Australasian Universities Power Engineering Conference (AUPEC 2013), 29 Sep–3 Oct 2013, Hobart, Australia.

Szabo, Phillip (2013) Development of a pump efficiency monitor for use in cotton irrigation. [USQ Project] (Unpublished)

Tangalajuk Siang, Jeri and Sharifian, Ahmad (2013) Reducing the mass of the refrigerant in the capillary tube of a propane air-conditioner. In: 14th Asian Congress of Fluid Mechanics (14 ACFM), 15-19 Oct 2013, Hanoi-Halong, Vietnam.

Sutcliffe, John William (2013) Urban wind turbine characterization system. [USQ Project] (Unpublished)

AL-Khaffajy, Marwaan and Mossad, Ruth (2013) Optimization of the heat exchanger in a flat plate indirect heating integrated collector storage solar water heating system. Renewable Energy, 57. pp. 413-421. ISSN 0960-1481

Hairuddin, A. Aziz and Wandel, Andrew P. and Yusaf, Talal (2013) A homogeneous charge compression ignition engine: an introduction. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2013) Development of artificial neural network model in predicting performance of the smart wind turbine blade. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2013) The air fuel ratio study for the mixture of biogas and hydrogen on mild combustion. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2013) Smart structure for small wind turbine blade. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2013) Analysis of recirculation zone and ignition position of non-premixed bluff-body for biogas mild combustion. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1176-1186. ISSN 2229-8649

Yusaf, T. and Baker, P. and Hamawand, I. and Noor, M. M. (2013) Effect of compressed natural gas mixing on the engine performance and emissions. International Journal of Automotive and Mechanical Engineering, 8. pp. 1416-1429. ISSN 2229-8649

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2013) Detail guide for CFD on the simulation of biogas combustion in bluff-body mild burner. In: 2nd International Conference of Mechanical Engineering Research (ICMER 2013): Green Technology for Sustainable Environment, 1-3 Jul 2013, Pahang, Malaysia.

Yusaf, Talal and Noor, M. M. and Wandel, Andrew P. (2013) Mild combustion: the future for lean and clean combustion. In: 2nd International Conference of Mechanical Engineering Research (ICMER 2013): Green Technology for Sustainable Environment, 1-3 Jul 2013, Pahang, Malaysia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2013) The development of MILD combustion open burner experimental setup. In: 2nd International Conference of Mechanical Engineering Research (ICMER 2013): Green Technology for Sustainable Environment, 1-3 Jul 2013, Pahang, Malaysia.

Mat Yasin, M. H. and Yusaf, Talal and Mamat, R. and Fitri Yusop, A. Fitri (2013) Characterization of a diesel engine operating with a small proportion of methanol as a fuel additive in biodiesel blend. Applied Energy. ISSN 0306-2619 (In Press)

Yusaf, T. and Hamawand, I. and Baker, P. and Najafi, G. (2013) The effect of methanol-diesel blended ratio on CI engine performance. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1385-1395. ISSN 2229-8649

Wandel, Andrew P. (2013) Extinction predictors in turbulent sprays. Proceedings of the Combustion Institute, 34 (1). pp. 1625-1632. ISSN 1540-7489

Wandel, Andrew P. and Lindstedt, R. Peter (2013) Hybrid multiple mapping conditioning modeling of local extinction. Proceedings of the Combustion Institute, 34 (1). pp. 1365-1372. ISSN 1540-7489

Mossad, Ruth and AL-Khaffajy, Marwaan (2013) Investigating two configurations of a heat exchanger in an indirect heating integrated collector storage solar water heating system. Journal of Energy and Power Engineering, 7 (1). pp. 66-73. ISSN 1934-8975

Shaddidi, Behdad and Yusaf, Talal and Alizadeh, Hossein Haji Agha and Ghobadian, Barat (2013) Experimental investigation of the tractor engine performance using diesohol fuel. Applied Energy. ISSN 0306-2619 (In Press)

Shahiduzzaman, MD and Alam, Khorshed (2013) Interfuel substitution in Australia: a way forward to achieve environmental sustainability. Australian Journal of Agricultural and Resource Economics , 57. pp. 1-21. ISSN 1364-985X (In Press)

Karimkashi, Shervin and Kermani, Mohammad J. and Sharifian, Ahmad and Hashempour, Javad (2012) Numerical computation of pressure drop across an off supplementary firing burner in heat recovery steam generator. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Al-Faruk, A. and Sharifian, S. A. and Al-Atresh, S. (2012) Numerical investigation of performance of a new type of savonius turbine. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Al-Faruk, Abdullah and Sharifian, Ahmad (2012) Angular velocity of a combined unloaded Savonius turbine with a vortex inducing chamber: a CFD approach. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sept 2012, Toowoomba, Australia.

Tangalajuk Siang, Jeri and Sharifian, Ahmad (2012) Reducing the amount of required propane refrigerant in the condenser of a commercial air-conditioner by increasing the inlet temperature. In: Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) The study of air fuel ratio for open furnace MILD combustion of biogas on bluff-body burner. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) A preliminary study of control parameters for open furnace mild combustion using CFD. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) Mild combustion: a technical review towards open furnace combustion. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) The modelling of the effect of air fuel ratio on unburned hydrocarbons for MILD combustion. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2012) Design of smart structures for wind turbine blades. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Widodo, Agung Sugeng (2012) Temperature variations in a free piston compression wind tunnel. [Thesis (PhD/Research)] (Unpublished)

Mossad, R. and AL-Khaffajy, M. (2012) Investigating two configurations of a heat exchanger in an Indirect Heating Integrated Collector Storage Solar Water Heating System (IHICSSWHS). Renewable Energy and Power Quality Journal (10). pp. 1-6. ISSN 2172-038X

Al-Juboori, Raed A. and Yusaf, Talal and Aravinthan, Vasanthadevi (2012) Investigating the efficiency of thermosonication for controlling biofouling in batch membrane systems. Desalination, 286. pp. 349-357. ISSN 0011-9164

Al-lwayzy, Saddam H. and Yusaf, Talal and Jensen, Troy (2012) Evaluating tractor performance and exhaust gas emissions using biodiesel from cotton seed oil. IOP Conference Series: Materials Science and Engineering, 36 (1). pp. 442-452. ISSN 1757-899X

Al-Juboori, R. A. and Yusaf, T. F. (2012) Improving the performance of ultrasonic horn reactor for deactivating microorganisms in water. IOP Conference Series: Materials Science and Engineering, 36 (012037). ISSN 1757-899X

AL-Khaffajy, Marwaan Awad Hamad (2012) Numerical evaluation of the performance of an indirect heating integrated collector storage solar water heating system. [Thesis (PhD/Research)] (Unpublished)

Spence, Jennifer E. (2012) Renewable energy in the Australian red meat processing industry & the viability of paunch as a biofuel. [Thesis (PhD/Research)] (Unpublished)

Amirruddin, A. K. and Noor, M. M. and Kadirgama, K. and Sharma, K. V. (2012) The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP). In: 3rd International Conference on Management of Natural Resources, Sustainable Development and Ecological Hazards: Ravage of the Planet III (RAV 2011) , 13-15 Dec 2011, Selangor, Malaysia.

Al-juboori, Raed Ahmed (2012) Ultrasound technology as a pre-treatment for biofouling control in reverse osmosis (RO) system. [Thesis (PhD/Research)] (Unpublished)

Rao, G. Srinivasa and Sharma, K. V. and Chary, S. P. and Bakar, R. A. and Rahman, M. M. and Kadirgama, K. and Noor, M. M. (2011) Experimental study on heat transfer coefficient and friction factor of Al2O3 nanofluid in a packed bed column. Journal of Mechanical Engineering and Sciences, 1 (1). pp. 1-15.

Wandel, Andrew P. (2011) A stochastic micromixing model based on the turbulent diffusion length scale. In: Australian Combustion Symposium 2011 (ACS 2011), 29 Nov-1 Dec 2011, Newcastle, Australia.

Noor, M. M. and Amiruddin, A. K. and Kadirgama, K. and Sharma, K. V. (2011) The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP). In: 3rd International Conference on Energy and Sustainability , 11-13 Apr 2011, Alicante, Spain.

Turnbull, Jon (2011) Improving the performance of the Nanango wastewater treatment plant. [USQ Project] (Unpublished)

Goh, Steven and Craig, Ian and Muller, Zach (2011) Solar thermal energy alternatives and their application to water heating and air cooling in the meat processing industry. In: SSEE 2011: Escaping Silos, 24–26 Oct 2011, Brisbane, Australia.

Searle, Joshua (2011) The efficient use of building mechanical services for saving energy. [USQ Project] (Unpublished)

Burgess, R. and Ahfock, A. (2011) The use of voltage regulators in power systems with arc-suppression coils. In: AUPEC 2011: Integrating Renewables into the Grid, 25-28 Sep 2011, Brisbane, Australia.

Bruce, Thomas (2011) Investigation of cost and performance characteristic of photovoltaic panels. [USQ Project] (Unpublished)

Yusaf, T. F. and Yousif, B. F. and Elawad, M. M. (2011) Crude palm oil fuel for diesel-engines: experimental and ANN simulation approaches. Energy, 36 (8). 4871-4878. ISSN 0360-5442

Yusaf, T. and Saleh, K. H. and Said, M. A. (2011) Engine performance and emission analysis of LPG-SI engine with the aid of artificial neural network. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 225 (5). pp. 591-600. ISSN 0957-6509

Burgess, R. and Ahfock, A. (2011) Minimising the risk of cross-country faults in systems using arc suppression coils. IET Generation, Transmission and Distribution, 5 (7). pp. 703-711. ISSN 1751-8687

Yusaf, Talal and Goh, Steven and Borserio, J. A. (2011) Potential of renewable energy alternatives in Australia. Renewable and Sustainable Energy Reviews, 15 (5). pp. 2214-2221. ISSN 1364-0321

Bangerter, Philip (2011) The latest on the thorium cycle as a sustainable energy source. In: 2011 Doctors and Scientists for Sustainability and Social Justice Meeting (D3SJ 2011) , 4 May 2011, Brisbane, Australia.

Burgess, Robert Thomas (2011) Improving high voltage power system performance using arc suppression coils. [Thesis (PhD/Research)] (Unpublished)

Clarke, Jason and Wandel, Andrew P. and Mastorakos, E. (2010) Analysis of data to develop models for spray combustion. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Bowtell, L. A. and Ahfock, A. L. (2010) Dynamic analysis of a DC offset controller for grid-connected inverters. In: AUPEC 2010: Power Quality for the 21st Century , 5-8 Dec 2010, Christchurch, New Zealand.

Kamel, Fouad (2010) Life-time cost-benefit analysis of solar energy systems in Queensland. In: 48th Annual Conference of the Australian Solar Energy Society: Bringing Business and Research Together for a Better Tomorrow (Solar2010), 1-3 Dec 2010, Canberra, ACT, Australia.

Clarke, Jason (2010) Analysis of data to develop models for spray combustion. [USQ Project] (Unpublished)

Di Bella, Robert Michael (2010) Biogas generation from an anaerobic pond 'abattoir'. [USQ Project] (Unpublished)

Perry, Ramon (2010) Design of a small wind turbine for a rural community in Australia. [USQ Project] (Unpublished)

Grygorcewicz, Jon-Paul Frederick (2010) Improvement of hydrocarbon dew point determination via gas chromatography. [USQ Project] (Unpublished)

Baker, Stuart (2010) Induced draft (ID) fan lubrication system design review and proposed modification upgrade at Callide C Power Station. [USQ Project] (Unpublished)

Muller, Zach Anthony (2010) Investigation of solar thermal energy alternatives and their applications to water heating and air cooling in the meat processing industry. [USQ Project] (Unpublished)

Kirkland, Rhys (2010) The development of a small scale gas turbine to assist in the analysis of coal seam gas as an alternative stationary jet fuel for Australia. [USQ Project] (Unpublished)

Said, Mior Azman and Buttsworth, David R. and Yusaf, Talal (2009) A review of radiation heat transfer measurement for diesel engines using the two-colour method. In: 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability (ICEE 2009) , 7-8 Dec 2009, Malacca, Malaysia.

Widodo, A. and Buttsworth, D. (2009) Deduction of temperature fluctuations in transient compression wind tunnels using incompressible turbulent flow data. In: 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability (ICEE 2009), 7-8 Dec 2009, Malacca, Malaysia.

Agrira, Abdalla and Buttsworth, David R. and Yusaf, Talal (2009) Instantaneous heat flux simulation of S.I. engines: comparison of unsteady thermal boundary layer modelling with experimental data. In: 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability (ICEE 2009), 7-8 Dec 2009, Malacca, Malaysia.

Buttsworth, D. R. (2009) Nitrous oxide decomposition for supersonic combustion experiments in the USQ Ludwieg Tube facility. In: Australian Combustion Symposium 2009 (ACS09), 2-4 Dec 2009, Brisbane, Australia.

Najafi, G. and Yusaf, T. F. and Ghobadian, B. and Najmeddin, V. R. and Yousif, B. F. (2009) Performance and exhaust emission of a SI engine fuelled with potato waste ethanol and its blends with gasoline. International Energy Journal, 10 (4). pp. 215-226. ISSN 1513-718X

Grimm, Justin John (2009) Electromagnetic linear actuator - design, manufacture and control. [USQ Project] (Unpublished)

Sharma, R. and Ball, J. A. R. (2009) Unipolar stitched inverter low-frequency harmonics caused by stitching delay. IET Power Electronics, 2 (5). pp. 508-516. ISSN 1755-4535

Najafi, G. and Ghobadian, B. and Tavakoli, T. and Buttsworth, D. R. and Yusaf, T. F. and Faizollahnejad, M. (2009) Performance and exhaust emissions of a gasoline engine with ethanol blended gasoline fuels using artificial neural network. Applied Energy, 86 (5). pp. 630-639. ISSN 0306-2619

Ghobadian, B. and Rahimi, H. and Nikbakht, A. M. and Najafi, G. and Yusaf, T. F. (2009) Diesel engine performance and exhaust emission analysis using waste cooking biodiesel fuel with an artificial neural network. Renewable Energy, 34 (4). pp. 976-982. ISSN 0960-1481

Rahimi, Hadi and Ghobadian, Barat and Yusaf, Talal and Najafi, Gholamhasan and Khatamifar, Mahdi (2009) Diesterol: an environment-friendly IC engine fuel. Renewable Energy, 34 (1). pp. 335-342. ISSN 0960-1481

Najafi, Gholamhassan and Yusaf, Talal (2009) Experimental investigation of using methanol-diesel blended fuels in diesel engine. In: 4th International Conference on Thermal Engineering Theory and Applications, 12-14 Jan 2009, Abu Dhabi, UAE.

Wandel, Andrew P. and Lindstedt, R. Peter (2009) Application of hybrid binomial Langevin-multiple mapping conditioning method to reacting jet flow. In: Australian Combustion Symposium 2009 (ACS09), 2-4 Dec 2009, Brisbane, Australia.

Schroll, Peter and Wandel, Andrew P. and Cant, R. Stewart and Mastorakos, E. (2009) Direct numerical simulations of autoignition in turbulent two-phase flows. Proceedings of the Combustion Institute, 32 (2). pp. 2275-2282. ISSN 1540-7489

Wandel, Andrew P. and Chakraborty, Nilanjan and Mastorakos, E. (2009) Direct numerical simulations of turbulent flame expansion in fine sprays. Proceedings of the Combustion Institute, 32 (2). pp. 2283-2290. ISSN 1540-7489

Sharifian, Ahmad and Buttsworth, David R. (2009) Direct radiation from wildfires through square woven screens. In: ASME 2008: Summer Heat Transfer Conference, 10-14 Aug 2008, Jacksonville, FL. USA.

Buttsworth, David R. and Saleh, Khalid and Yusaf, Talal (2009) Discrete particle simulation for the initial stages of ice accretion in aircraft engines: initial model development. In: 3rd International Conference on Energy and Environment (ICEE 2009), 7-8 December 2009, Malacca, Malaysia.

Wandel, Andrew P. and Lindstedt, R. Peter (2009) Hybrid binomial Langevin-multiple mapping conditioning modeling of a reacting mixing layer. Physics of Fluids, 21 (1). 015103-015116. ISSN 1070-6631

Kamel, Fouad (2009) Potential contribution of solar energy towards electrical peak demands in South-East Queensland. In: SSEE 2009: Solutions for a Sustainable Planet , 22-24 Nov 2009, Melbourne, Australia .

Lear, Foster Robert (2008) Hoist system for small boat stacker. [USQ Project] (Unpublished)

Strong, Simon James (2008) Design of a small wind turbine. [USQ Project] (Unpublished)

Bowtell, Les and Ahfock, Tony (2007) Comparison between unipolar and bipolar single phase grid-connected inverters for PV applications. In: AUPEC 2007: 17th Australasian Universities Power Engineering Conference, 9-12 Dec 2007, Perth, Australia.

Kleynhans, Claudius Justus (2007) Design and review of Millmerran coal handling plant. [USQ Project] (Unpublished)

Grassick, Bruce (2006) Design and construction of a solar collector for teaching purposes. [USQ Project] (Unpublished)

Gribble, Brett (2006) Stress relieving furnace modelling and analysis. [USQ Project] (Unpublished)

Hamid, H. A. and Yusaf, T. and Yusof, Z. M. (2006) An investigation on the improvement of the operation of Tenom Pangi HPP cooling power system. In: International Conference on Energy and Environment 2006 (ICEE 2006), 28-30 Aug 2006, Kajang, Malaysia.

Abdalla, Fouad Kamel (2005) Modelling and assessment of an experimental combined evacuated-tubes-direct-flat-plate solar heater. In: 43rd Annual Conference of the Australian and New Zealand Solar Energy Society (Solar05), 28-30 Nov 2005, Dunedin, New Zealand.

Dyke, Geoffrey Wayne (2005) Optimising condenser air extraction to reduce greenhouse gas emissions at the Loy Yang B power station. [USQ Project] (Unpublished)

Abdullah, Shahrir and Yousif, B. F. and Sopian, Kamaruzzaman (2005) Design consideration of low temperature differential double-acting Stirling engine for solar application. Renewable Energy, 30 (1). pp. 1923-1941. ISSN 0960-1481

Eagle, Michael Allan (2005) Numerical investigation of the thermal efficiency of glass refrigeration doors. [USQ Project] (Unpublished)

Sharma, Ronald (2005) Removal of DC offset current from transformerless PV inverters connected to utility. In: 40th International Universities Power Engineering Conference (UPEC 2005), 7-9 Sept 2005, Cork, Ireland.

Deo, R. C. and Mi, J. and Nathan, G. J. (2004) An investigation of the influence of nozzle aspect ratio on the velocity field of turbulent plane jet. In: 15th Australasian Fluid Mechanics Conference (AFMC 2004), 13-17 Dec 2004, Sydney, Australia.

Goodger, Anthony Maldon (2004) The formation of nitrogen oxides in a pulverised coal boiler. [USQ Project] (Unpublished)

Xiang, Wei and Fok, Sai Cheong and Thimm, Georg (2004) Agent-based composable simulation for virtual prototyping of fluid power system. Computers in Industry, 54 (3). pp. 237-251. ISSN 0166-3615

Epaarachchi, Jayantha A. and Clausen, Philip D. (2004) Accelerated full scale fatigue testing of a small composite wind turbine blade using a mechanically operated test rig. In: 2004 Structural Integrity and Fracture International Conference (SIF2004), 26-29 Sept 2004, Brisbane, Australia.

Ali, Md Nawsher and Islam, Md Mainul and Ferdous, Chy. Md Refaul (2004) Investigation for a suitable screw of a briquetting machine. In: 2nd BSME-ASME lnternational Conference on Thermal Engineering, 2-4 Jan 2004, Dhaka, Bangladesh.

Kamel, Fouad (2003) Cost per kWh produced and payback time of a PV -solar -thermal -combined roof top collector at different locations in New Zealand. In: 41st Annual Conference of the Australian and New Zealand Solar Energy Society (Solar03), 25 Nov - 2 Dec 2003, Melbourne, Australia.

Islam, Md Mainul and Khan, Kamrujjaman and Ali, Md Nawsher and Islam, Md Shahidul (2003) An investigation on the raw materials and products of the briquetting machine. In: 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003), 19-20 Dec 2003 , Khulna, Bangladesh.

Ferdous, C. M. R. and Islam, M. Shahidul and Islam, M. Mainul and Alam, M. M. Asraful and Rahman, A. N. M.Mizanur (2003) Solar photovoltaic technology and Bangladesh. In: 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003), 19-20 Dec 2003, Khulna, Bangladesh.

Kamel, Fouad (2002) Optimum operating temperature for evacuated tube solar collectors. In: 40th Annual Conference of the Australian and New Zealand Solar Energy Society (Solar02): Solar Harvest, 25 Nov - 2 Dec 2002, Newcastle, Australia.

Kamel, Fouad and Wilson, Paul (2002) Cost of kWh produced and payback time of a pv-solar-thermal-combined rooftop collector at different locations in New Zealand. In: EEA Annual Conference & Trade Exhibition 2002: Meeting the Challenges of Growth, 21-22 June 2002, Christchurch, New Zealand.

Kamel, Fouad and Wilson, Paul (2001) Assessment of domestic evacuated tube direct solar water heater. In: 2001 Solar World Congress (ISES 2001), 25 Nov – 2 Dec 2001, Adelaide, Australia.

Kamel, Fouad (1989) A design factor for photovoltaic power stations. In: 9th European Communities Photovoltaic Solar Energy Conference, 25-29 Sept 1989, Freiburg, Germany.

This list was generated on Sat Aug 2 03:46:27 2014 EST.