Browse by Fields of Research (ANZSRC 2008)

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Number of items at this level: 128.

Shalwan, A. and Yousif, B. F. (2014) Investigation on interfacial adhesion of date palm/epoxy using fragmentation technique. Materials and Design , 53. pp. 928-937. ISSN 0261-3069

Azwa, Z. N. and Yousif, B. F. (2013) Characteristics of kenaf fibre/epoxy composites subjected to thermal degradation. Polymer Degradation and Stability, 98 (12). 2752-2759. ISSN 0141-3910

Lokuge, Weena and Aravinthan, Thiru (2013) Effect of fly ash on the behaviour of polymer concrete with different types of resin. Materials and Design, 51. pp. 175-181. ISSN 0264-1275

Peauril, J. and Epaarachchi, J. and Lau, K. T. and Wang, H. (2013) Embedded fibre optic sensors under multi-axial loading: a pilot study. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 July 2013, Gold Coast, Australia.

Zhang, Zuhua and Yang, Tao and Wang, Hao and Yao, Xiao (2013) Inorganic polymer foams: transform from non-structural to structural upon fire. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 July 2013, Gold Coast, Australia.

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak (2013) Cure shrinkage in epoxy grouts for grouted repairs. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 July 2013, Gold Coast, Australia.

Guades, Ernesto Jusayan (2013) Behaviour of glass FRP composite tubes under repeated impact for piling application. [Thesis (PhD/Research)] (Unpublished)

Thota, N. M. and Epaarachchi, J. A. and Lau, K. T. (2013) Important aspects of finite element modeling of low density thermo plastic closed cell foams. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

Arhaim, Y. H and Shalwan, A. and Yousif, B. F. (2013) Correlation between frictional force, interface temperature and specific wear rate of fibre polymer composites. In: Advanced Materials Research. Advanced Materials Research (685). Trans Tech Publications, Switzerland, pp. 45-49. ISBN 978-303785676-5

He, Yu-xin and Li, Qi and Kuila, Tapas and Kim, Nam Hoon and Jiang, Tongwu and Lau, Kin-tak and Lee, Joong Hee (2013) Micro-crack behavior of carbon fiber reinforced thermoplastic modified epoxy composites for cryogenic applications. Composites Part B: Engineering , 44 (1). pp. 533-539. ISSN 1359-8368

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2013) A review on the characteristics of gomuti fibre and its composites with thermoset resins. Journal of Reinforced Plastics and Composites, 32 (2). pp. 124-136. ISSN 0731-6844

Ho, Mei-Po and Wang, Hao and Lau, Kin-Tak and Leng, Jinsong (2013) Effect of silk fiber to the mechanical and thermal properties of its biodegradable composites. Journal of Applied Polymer Science , 127 (4). pp. 2389-2396. ISSN 0021-8995

Albdiry, M. T. and Ku, H. and Yousif, B. F. (2013) Impact fracture behaviour of silane-treated halloysite nanotubes-reinforced unsaturated polyester. Engineering Failure Analysis, 35. pp. 718-725. ISSN 1350-6307

Yan, Zili and Zhang, Jianchun and Zhang, Hua and Wang, Hao (2013) Improvement of mechanical properties of noil hemp fiber reinforced polypropylene composites by resin modification and fiber treatment. Advances in Materials Science and Engineering, 2013. pp. 1-7. ISSN 1687-8434

Shamsuddoha, M. and Islam, M. M. and Aravinthan, T. and Manalo, A. C. and Lau, K. T. (2013) Mechanical properties of epoxy grouts for structural repair. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Aldousiri, B. and Alajmi, M. and Shalwan, A. (2013) Mechanical properties of palm fibre reinforced recycled HDPE. Advances in Materials Science and Engineering , 2013. pp. 1-7. ISSN 1687-8434

Lokuge, W. P. and Aravinthan, T. (2013) Mechanical properties of polymer concrete with different types of resin. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2013) Properties and behaviour of gomuti fibre composites under tensile and compressive load. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Yan, Z. L. and Wang, H. and Lau, K. T. and Pather, S. and Zhang, J. C. and Lin, G. and Ding, Y. (2013) Reinforcement of polypropylene with hemp fibres. Composites Part B: Engineering , 46. pp. 221-226. ISSN 1359-8368

Nirmal, Umar and Hashim, Jamil and Rilling, Dirk and Brevern, P. V. and Yousif, B. F. (2013) Tribo performance of T-BFRP composite subjected to dry/wet contact conditions. In: Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Advances in Materials Science (2). Apple Academic Press, Toronto, Canada, pp. 311-326. ISBN 978-1-926895-16-1

Aldousiri, B. and Shalwan, A. and Chin, C. W. (2013) A review on tribological behaviour of polymeric composites and future reinforcements. Advances in Materials Science and Engineering , 2013. pp. 1-8. ISSN 1687-8434

Yousif, B. F. and Orupabo, C. and Azwa, Z. N. (2012) Characteristics of kenaf fibre immersed in different solutions. Journal of Natural Fibers, 9 (4). pp. 207-218. ISSN 1544-0478

Yang, Tao and Yao, Xiao and Zhang, Zuhua and Wang, Hao (2012) Mechanical property and structure of alkali-activated fly ash and slag blends. Journal of Sustainable Cement-Based Materials, 1 (4). pp. 167-178. ISSN 2165-0373

Lokuge, W. and Eberhard, D. and Karunasena, W. (2012) Geopolymer concrete with FRP confinement. In: 6th International Composites Conference (ACUN 6): Composites and Nanocomposites in Civil, Offshore and Mining Infrastructure , 14-16 Nov 2012, Melbourne, Australia.

Hemming, Steven (2012) Sandwich panels for slab applications. [USQ Project] (Unpublished)

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. (2012) Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview. Composites Part B: Engineering, 43 (7). pp. 2883-2892. ISSN 1359-8368

Zhang, Zuhua and Yao, Xiao and Wang, Hao (2012) Potential application of geopolymers as protection coatings for marine concrete III. Field experiment. Applied Clay Science, 67-68. pp. 57-60. ISSN 0169-1317

Yousif, B. F. and Chin, C. W. (2012) Epoxy composite based on kenaf fibers for tribological applications under wet contact conditions. Surface Review and Letters, 19 (5). pp. 1250050-1. ISSN 0218-625X

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

Tawfik, Qaidar H. and Karunasena, Warna (Karu) and Cardona, Francisco (2012) Strengthening of corroded steel angles using CFRP. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

Islam, Md Mainul and Aravinthan, Thiru and Williams, Paul Garreth (2012) Behaviour of pultruded FRP hollow sections under eccentric loading. In: 6th International Conference on FRP Composites in Civil Engineering (CICE 2012), 13-15 Jun 2012, Rome, Italy.

Yousif, B. F. and Ku, H. (2012) Suitability of using coir fiber/polymeric composite for the design of liquid storage tanks. Materials and Design, 36. pp. 847-853. ISSN 0264-1275

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. and Aravinthan, T. (2012) Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites. Composites Part B: Engineering, 43 (2). pp. 159-169. ISSN 1359-8368

Cardona, Francisco and Lau, Alan Kin-Tak and Fedrigo, Jessica (2012) Novel phenolic resins with improved mechanical and toughness properties. Journal of Applied Polymer Science, 123 (4). pp. 2131-2139. ISSN 0021-8995

Tawfik, Qaidar H. (2012) Rehabilitation of deteriorated steel truss members using CFRP. [Thesis (PhD/Research)] (Unpublished)

Ho, Mei-Po (2012) Strengthening mechanism and bio-degradability of a silk-based polymer composite. [Thesis (PhD/Research)] (Unpublished)

Lostroh, Tristan (2012) Investigation into the strength of Lego Technic liftarms and brick beams, and of liftarm pin connections. Project Report. Unpublished, Toowoomba. (Unpublished)

Ho, Mei-po and Wang, Hao and Lee, Joong-Hee and Ho, Chun-kit and Lau, Kin-tak and Leng, Jinsong and Hui, David (2012) Critical factors on manufacturing processes of natural fibre composites. Composites Part B: Engineering, 43 (8). pp. 3549-3562. ISSN 1359-8368

Mishra, Ananta Kumar and Bae, Seon-Hyeong and Kim, Nam Hoon and Lau, Kin-tak and Lee, Joong Hee (2012) Nafion-peptized laponite clay nanocomposite membrane for PEMFC. In: 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM 20), 15-18 Dec 2011, Hong Kong.

Cardona, Francisco and Tawfik, Qaidar H. and Karunasena, Karu (2012) Reinforcement of corroded steel structures with CFRP panels. In: ICACE 2012: International Conference on Architectural and Civil Engineering, 24-25 Oct 2012, Bali, Indonesia.

Trada, M. and Mandava, J. and Ku, H. and Yousif, B. (2012) Tensile properties of bagasse reinforced epoxy composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today , 6-8 Nov 2012 , Kuala Lumpur, Malaysia .

Ku, Harry and Cardona, Francisco and Jamal Eddine, Mustapha (2012) Thermal properties of calcium carbonate powder reinforced vinyl ester composites: pilot study. Journal of Applied Polymer Science . ISSN 0021-8995 (In Press)

Cardona, F. and Fedrigo, J. (2011) Synthesis of elastomeric phenolic resins with improved toughness and flexibility. In: EUROTEC 2011: Inaugural European Technical Conference on Plastics, 14-15 Nov 2011, Barcelona, Spain.

Yousif, B. F. and Nirmal, Umar (2011) Wear and frictional performance of polymeric composites aged in various solutions. Wear, 272 (1). pp. 97-104. ISSN 0043-1648

Dong, Yu and Chaudhary, Deeptangshu and Ploumis, Charlie and Lau, Kin-tak (2011) Correlation of mechanical performance and morphological structures of epoxy micro/nanoparticulate composites. Composites Part A: Applied Science and Manufacturing , 42 (10). pp. 1483-1492. ISSN 1359-835X

Al-Sandooq, J. M. and Yousif, B. F. and Jensen, T. A. (2011) The possibility of using polymers in agriculture milling equipment. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Ku, H. S. (2011) Relationship between different mechanical properties of phenol formaldehyde SLG-reinforced composites. Journal of Reinforced Plastics and Composites, 30 (15). pp. 1281-1292. ISSN 0731-6844

Bose, Saswata and Kuila, Tapas and Nguyen, Thi Xuan Hien and Kim, Nam Hoon and Lau, Kin-tak and Lee, Joong Hee (2011) Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenge. Progress in Polymer Science, 36 (6). pp. 813-843. ISSN 0079-6700

Kabir, M. M. and Wang, H. and Aravinthan, T. and Cardona, F. and Lau, K.-T. (2011) Effects of natural fibre surface on composite properties: a review. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing , 27-29 Apr 2011, Brisbane, Australia.

Manthey, N. W. and Cardona, F. and Aravinthan, T. (2011) Mechanical properties of epoxidized hemp oil based biocomposites: preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27 -29 Apr 2011, Brisbane, Australia.

Cooney, T. I. and Cardona, F. and Tran-Cong, T. (2011) Kinetics of in situ epoxidation of hemp oil under heterogeneous reaction conditions: an overview with preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27-29 Apr 2011, Brisbane, Australia.

Ku, H. and Wong, P. and Maxwell, A. and Huang, J. and Fung, H. and Mohan, T. (2011) A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

Banerjee, S. and Bhattacharyya, D. (2011) Optimal design of sandwich panels made of wood veneer hollow cores. Composites Science and Technology, 71 (4). pp. 425-432. ISSN 0266-3538

Singh, N. and Yousif, B. F. and Rilling, D. (2011) Adhesive wear of thermoplastic composite based on kenaf fibres. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225 (2). pp. 101-109. ISSN 1350-6501

Mahadi, Muhammad Razif (2011) Critical issues in precise machining of oversize moulds in polystyrene. [Thesis (PhD/Research)] (Unpublished)

Kabir, M. M. and Wang, H. and Cardona, F. and Aravinthan, T. (2011) Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Zhang, Z. and Wang, H. and Reid, A. and Aravinthan, T. (2011) Effects of fly ash source and curing procedure on strength development of geopolymers. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Singh, Narish and Yousif, B. F. and Rilling, Dirk (2011) Investigations on wear and frictional properties of kenaf fibre polyurethane composites under dry and wet contact conditions. International Journal of Precision Technology, 2 (4). pp. 375-387. ISSN 1755-2060

Leng, Jinsong and Lau, Alan kin-tak, eds. (2011) Multifunctional polymer nanocomposites. Taylor & Francis (CRC Press), Boca Raton, FL. United States. ISBN 978-1-4398-1682-0

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2011) Natural fibre composites with QLD based fibres and vegetable oils. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Lokuge, W. P. and Setunge, S. and Sanjayan, J. G. (2011) Stress-strain model for high strength concrete confined by FRP. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Epaarachchi, J. A. (2011) The effect of viscoelasticity on fatigue behaviour of polymer matrix composites. In: Creep and fatigue in polymer matrix composites. Woodhead Publishing Ltd, Cambridge, United Kingdom, pp. 492-513. ISBN 978 1 84569 656 6; eISBN 978-0-85709-043-0

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2010) Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Wang, Hao (2010) Sustainable materials research at USQ. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Chin, C. W. and Yousif, B. F. (2010) Tribological behaviour of KFRE composite. International Journal of Modern Physics B, 24 (28). pp. 5589-5599. ISSN 0217-9792

Bailey, Thomas Sullivan (2010) Environmentally friendly natural waste materials for use in civil structures. [USQ Project] (Unpublished)

Yousif, B. F. and Nirmal, Umar and Wong, K. J. (2010) Three-body abrasion on wear and frictional performance of treated betelnut fibre reinforced epoxy (T-BFRE) composite. Materials and Design, 31 (9). pp. 4514-4521. ISSN 0264-1275; 0261-3069

Yousif, B. F. (2010) Effect of oil palm fibres volume fraction on mechanical properties of polyester composites. International Journal of Modern Physics B, 24 (23). pp. 4459-4470. ISSN 0217-9792

Yousif, B. F. and Alsofyani, I. M. and Yusaf, Talal (2010) Adhesive wear and frictional characteristics of UHMWPE and HDPE sliding against different counterfaces under dry contact condition. Tribology, 4 (2). pp. 78-85. ISSN 1751-5831

Epaarachchi, Jayantha A. and Reushle, Matthew T. (2010) Performance of aluminium/vinylester particulate composite. In: PRICM7: 7th Pacific Rim International Conference on Advanced Materials and Processing, 2-6 Aug 2010, Cairns, Australia.

Nirmal, Umar and Yousif, B. F. and Rilling, Dirk and Brevern, P. V. (2010) Effect of betelnut fibres treatment and contact conditions on adhesive wear and frictional performance of polyester composites. Wear, 268 (11-12). pp. 1354-1370. ISSN 0043-1648

Ku, H. and Kota, V. and Trada, M. (2010) Optimum percentage of fly ash reinforcement in vinyl ester composites. Journal of Materials in Civil Engineering, 22 (1). pp. 104-107. ISSN 0899-1561

Yousif, B. F. and El-Tayeb, N. S. M. (2010) Wet adhesive wear characteristics of untreated oil palm fibre-reinforced polyester and treated oil palm fibre-reinforced polyester composites using the pin-on-disc and block-on-ring techniques. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 224 (2). pp. 123-131. ISSN 1350-6501

Nasir, T. and Yousif, B. F. and McWilliam, S. and Salih, N. D. and Hui, L. T. (2010) An artificial neural network for prediction of the friction coefficient of multi-layer polymeric composites in three different orientations. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (2). pp. 419-429. ISSN 0954-4062

Yousif, B. F. and Yusaf, Talal (2010) Abrasive wear behaviour of epoxy composite based on kenaf fibres. In: ASIATRIB 2010: Frontiers in Tribology - Knowledge and Friendship, 5-9 Dec 2010, Perth, Australia.

Singh, Narish and Rilling, Dirk and Yousif, B. F. (2010) Kenaf fibers for tribo-thermoplastic composites. In: IMECE 2009: ASME International Mechanical Engineering Congress and Exposition, 13-19 Nov 2009, Lake Buena Vista, FL. United States.

Cardona, F. and Aravinthan, T. and Moscou, C. (2010) Modified PF resins for composite structures with improved mechanical properties. Polymers and Polymer Composites, 18 (6). pp. 297-306. ISSN 0967-3911

Wong, K. J. and Yousif, B. F. and Low, K. O. (2010) The effects of alkali treatment on the interfacial adhesion of bamboo fibres. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 224 (3). pp. 139-148. ISSN 1464-4207

Cheng, Sha and Lau, Kin-Tak and Liu, Tao and Zhao, Yong-Qing and Lam, Pou-Man and Yin, Yansheng (2009) Mechanical and thermal properties of chicken feather fiber/PLA green composites. Composites Part B: Engineering, 40 (7). pp. 650-654. ISSN 1359-8368

Zerbst, Samuel David William (2009) Temperature effects on a fibre reinforced polymer material. [USQ Project] (Unpublished)

Coulter, Allison Kerrie-Anne (2009) Use of Fiber Bragg grating sensors in structural health monitoring. [USQ Project] (Unpublished)

Wang, Bo and Teng, J. G. and De Lorenzis, Laura and Zhou, Li-Min and Ou, Jinping and Jin, Wei and Lau, K. T. (2009) Strain monitoring of RC members strengthened with smart NSM FRP bars. Construction and Building Materials, 23 (4). pp. 1698-1711. ISSN 0950-0618

Gill, N. Singh and Yousif, B. F. (2009) Wear and frictional performance of betelnut fibre-reinforced polyester composite. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (2). pp. 183-194. ISSN 1350-6501

Guo, Qing Bing and Lau, Kin-Tak and Zheng, Bing Fa and Rong, Min Zhi and Zhang, Ming Qiu (2009) Imparting ultra-low friction and wear rate to epoxy by the incorporation of microencapsulated lubricant? Macromolecular Materials and Engineering, 294 (1). pp. 20-24. ISSN 1438-7492

Yousif, B. F. (2009) Frictional and wear performance of polyester composites based on coir fibres. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (1). 51 -59. ISSN 1350-6501

Wen, Chin Chee and Yousif, B. F. (2009) Potential of kenaf fibres as reinforcement for tribological applications. Wear, 267 (9-10). pp. 1550-1557. ISSN 0043-1648

Cardona, F. and Moscou, C. (2009) Synthesis and characterization of modified phenolic resins for composites with enhanced mechanical properties. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Yousif, B. F. and Nirmal, Singh Gill and Lau, Saijod T. W. and Devadas, Alvin (2009) The potential of using betelnut fibres for tribo-polyester composites considering three different orientations. In: ASME 2008 International Mechanical Engineering Congress and Exposition (IMECE2008), 31 Oct - 06 Nov 2008, Boston, Massachusetts, USA.

Ku, H. and Jacobson, W. and Trada, M. and Cardona, F. and Rogers, D. (2008) Tensile tests of phenol formaldehyde SLG reinforced composites: pilot study. Journal of Composite Materials, 42 (26). pp. 2783-2793. ISSN 0021-9983

Li, Xiao-Feng and Lau, Kin-Tak and Yin, Yan-Sheng (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology, 68 (14). pp. 2876-2881. ISSN 0266-3538

Si, Xiaojuan and Guo, Linfeng and Wang, Yimin and Lau, Kin-Tak (2008) Preparation and study of polypropylene/polyethylene terephthalate composite fibres. Composites Science and Technology, 68 (14). pp. 2943-2947. ISSN 0266-3538

Cheung, Hoi-Yan and Lau, Kin-tak and Tao, Xiao-Ming and Hui, David (2008) A potential material for tissue engineering: silkworm silk/PLA biocomposite. Composites Part B: Engineering, 39 (6). pp. 1026-1033. ISSN 1359-8368

Ku, H. and Cardona, F. and Rogers, D. and Vandenbroucke, A. (2008) Effects of EPON on mechanical and thermal properties of epoxy resins. In: ICMMSE 2008: International Conference on Multifunctional Materials and Structures, 28-31 Jul 2008, Hong Kong.

Munoz, J.-C. and Ku, H. and Cardona, F. and Rogers, D. (2008) Effects of catalysts and post-curing conditions in the polymer network of epoxy and phenolic resins: preliminary results. Journal of Materials Processing Technology, 202 (1-3). pp. 486-492. ISSN 0924-0136

Yousif, B. F. (2008) Replacing of glass fibres with seed oil palm fibres for tribopolymeric composites. Tribology - Materials, Surfaces and Interfaces, 2 (2). pp. 99-103. ISSN 1751-5831

El-Tayeb, N. S. M. and Yousif, B. F. and Yap, T. C. (2008) An investigation on worn surfaces of chopped glass fibre reinforced polyester through SEM observations. Tribology International, 41 (5). pp. 331-340. ISSN 0301-679X

Ku, Harry and Rogers, David and Davey, Robert and Cardona, Francisco and Trada, Mohan (2008) Fracture toughness of phenol formaldehyde composites: pilot study. Journal of Materials Engineering and Performance, 17 (1). pp. 85-90. ISSN 1059-9495

Chin, C. W. and Yousif, B. F. (2008) Adhesive and frictional behaviour of polymeric composites based on kenaf fibre. In: 2nd International Conference on Advanced Tribology (iCAT 2008), 3-5 Dec 2008, Singapore.

Danaelan, D. and Yousif, B. F. (2008) Adhesive wear performance of CFRP multilayered polyester composites under dry/wet contact conditions. Surface Review and Letters, 15 (6). pp. 919-925. ISSN 0218-625X

El-Tayeb, N. S. M. and Yousif, B. F. (2008) Adhesive wear performance of T-OPRP and UT-OPRP composites. Tribology Letters, 32 (3). pp. 199-208. ISSN 1023-8883

Asamoto, S. and Mutsuyoshi, H. and Aravinthan, T. and Suzukawa, K. (2008) Experimental investigation of innovative hybrid composite girders with GFRP and CFRP. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Chee, Su Be and Al Shalabi, Ammar and Yousif, B. F. (2008) On the effect of counterface materials on tribo-behavior of steel wire sliding under dry contact condition. Surface Review and Letters, 15 (4). pp. 355-360. ISSN 0218-625X

Cardona, F. and Ku, H. and Pattarachaiyakoop, N. and Rogers, D. and Trada, M. (2007) Fracture toughness of phenol formaldehyde composites post-cured in microwaves. Journal of Electromagnetic Waves and Applications, 21 (14). pp. 2137-2146. ISSN 0920-5071

Cardona, F. and Rogers, D. and Van Erp, G. (2007) Investigation by TGA-FTIR of the effect of styrene content and thickness on the UV-curing of vinylester resins. Journal of Thermoplastic Composite Materials, 20 (6). pp. 601-615. ISSN 0892-7057

Davidson, Thomas Peter George (2007) Using tensile tests as benchmark, investigate the best percentage by weight of slg, as fillers, in Phenolic resins post-cured by microwaves. [USQ Project] (Unpublished)

Doherty, William and Halley, Peter J. and Edye, Les and Rogers, David and Cardona, Francisco and Park, Yosup and Woo, Tim (2007) Studies on polymers and composites from lignin and fiber derived from sugar cane. Polymers for Advanced Technologies, 18 (8). pp. 673-678. ISSN 1042-7147

Faigl, Pavel and Rogers, David and Maurin, Romain and Van Erp, Gerard (2007) Plant based resins for fibre composites. In: 4th Annual Composites Australia and Composites CRC Conference (CRC 2007): New Technology Taking Shape, 19-20 Apr 2007, Gold Coast, Australia.

Yousif, B. F. and El-Tayeb, N. S. M. (2007) Tribological evaluations of polyester composites considering three orientations of CSM glass fibres using BOR machine. Applied Composite Materials, 14 (2). pp. 105-116. ISSN 1573-4897

Cardona, F. and Rogers, D. and Davey, S. and Van Erp, G. (2007) Investigation of the effect of styrene content on the ultimate curing of vinylester resins by TGA-FTIR. Journal of Composite Materials, 41 (2). pp. 137-152. ISSN 0021-9983

El-Tayeb, N. S. M. and Yousif, B. F. (2007) Evaluation of glass fiber reinforced polyester composite for multi-pass abrasive wear applications. Wear, 262 (9-10). pp. 1140-1151. ISSN 0043-1648

Yousif, B. F. and El-Tayeb, N. S. M. (2007) On the effect of woven glass fabric orientations on wear and friction properties of polyester composite. Surface Review and Letters, 14 (3). pp. 489-497. ISSN 0218-625X

Ku, H. and Trada, M. and Puttgunta, V. C. and Kota, V. (2007) Yield and tensile strength of vinyl ester composites cured by microwaves. Journal of Electromagnetic Waves and Applications, 21 (4). pp. 517-526. ISSN 0920-5071

Yousif, B. F. and El-Tayeb, N. S. M. (2007) The effect of oil palm fibers as reinforcement on tribological performance of polyester composite. Surface Review and Letters, 14 (6). pp. 1095-1102. ISSN 0218-625X

Le, Phong and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2007) A numerical study of strain localization in elasto-thermo-viscoplastic materials using radial basis function networks. Computers, Materials and Continua, 5 (2). pp. 129-150. ISSN 1546-2218

Davey, Robert James (2006) Best percentage by weight of micro-spheres as fillers in phenolic resins, with fracture toughness as a benchmark. [USQ Project] (Unpublished)

Gurney, Richard Noel (2006) Best percentage weight of microspheres as fillers in resin using three-point bending test. [USQ Project] (Unpublished)

Karunasena, W. (Karu) and Williams, K. (2006) Behaviour of FRP-to-concrete bonded joints. In: ACUN-5 International Composites Conference, 11-14 July 2006, Sydney, NSW, Australia.

Davey, Scott W. and Heldt, Tim and Van Erp, Gerard and Ayers, Stephen R. (2005) Vinylester/cenosphere composite materials for civil and structural engineering. FRP International : The Official Newsletter of the International Institute for FRP in Construction, 2 (3). pp. 2-5.

El-Tayeb, N. S. M. and Yousif, B. F. and Yap, T. C. (2005) Tribological studies of polyester reinforced with CSM 450-R-glass fiber sliding against smooth stainless steel counterface. Wear, 261 (3-4). pp. 443-452. ISSN 0043-1648

Melnik, R. V. N. and Strunin, D. V. and Roberts, A. J. (2005) Nonlinear analysis of rubber-based polymeric materials with thermal relaxation models. Numerical Heat Transfer Part A: Applications, 47 (6). pp. 549-569. ISSN 1040-7782

Khennane, Amar and Melchers, Robert E. (2005) A meso-scale finite element model for environmental stress corrosion of GFRP. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005): Advances in Applied Mechanics, 16-18 Feb 2005, Melbourne, Australia.

Ku, Harry S. and Siores, Elias and Ball, James A. R. (2005) Application of variable frequency microwave (VFM) to adhesives. Journal of Electromagnetic Waves and Applications, 19 (11). pp. 1467-1484. ISSN 0920-5071

Davey, Scott W. (2004) A foundational investigation of vinyl ester / cenosphere composite materials for civil and structural engineering. [Thesis (PhD/Research)] (Unpublished)

Khennane, Amar and Melchers, Robert E. (2003) Meso-scale finite element investigation into the short and long term strengths of glass fibre reinforced composites. Technical Report. University of Southern Queensland, Toowoomba, Australia.

Ku, H. S. and Siu, F. and Siores, E. and Ball, J. A. R. (2003) Variable frequency microwave (VFM) processing facilities and application in processing thermoplastic matrix composites. Journal of Materials Processing Technology, 139 (1-3 S). pp. 291-295. ISSN 0924-0136

Khennane, Amar and Melchers, Robert E. (2003) Durability of glass polymer composites subject to stress corrosion. Journal of Composites for Construction, 7 (2). pp. 109-117. ISSN 1090-0268

Ku, H. S. and Siu, F. and Siores, E. and Ball, J. A. R. (2002) Applications of fixed and variable frequency microwave (VFM) facilities in polymeric materials processing and joining. In: 2nd World Engineering Congress (WEC 2002), 22-25 Jul 2002, Kuching, Malaysia.

Ku, H. S. and Siu, F. and Siores, E. and Ball, J. A. R. and Blicblau, A. S. (2001) Applications of fixed and variable frequency microwave (VFM) facilities in polymeric materials processing and joining. In: 5th Asia Pacific Conference on Materials Processing, 25 Jun 2001, Seoul, Korea.

This list was generated on Wed Apr 23 00:58:22 2014 EST.