|Up a level|
McInally, Stuart Anthony (2013) Cost effective galvanising in remote areas. [USQ Project] (Unpublished)
Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2013) Shear behaviour of glued structural fibre composite sandwich beams. Construction and Building Materials, 47. pp. 1317-1327. ISSN 0950-0618
Salleh, Z. and Islam, M. M. and Ku, H. (2013) Tensile behaviours of activated carbon coconut shell filled epoxy composites. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.
Misnon, M. I. and Islam, M. M. and Epaarachchi, J. and Lau, K. T. (2013) Textile material forms for reinforcement materials: a review. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.
Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2013) Wave propogation scattering due to defect on thin composite plates. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.
Aldousiri, B. and Shalwan, A. and Chin, C. W. (2013) A review on tribological behaviour of polymeric composites and future reinforcements. Advances in Materials Science and Engineering , 2013. pp. 1-8. ISSN 1687-8434
Bolt, Jason. R. (2013) The impact of photocatalytic TiO2 on permeable concrete mix designs and its application for the degradation of organic pollutants in water. [Thesis (PhD/Research)] (Unpublished)
Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2012) Development of smart wind turbine blades. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.
Kabir, Mohammad Mazedul (2012) Effects of chemical treatments on hemp fibre reinforced polyester composites. [Thesis (PhD/Research)] (Unpublished)
Albdiry, Mushtaq and Alethari, Haydar (2012) Effect of alumina inclusions on microstructure and mechanical properties of 62 WC, 32 (Ti-W) C and 6 Co compacts. International Journal of Microstructure and Materials Properties, 7 (4). pp. 329-340. ISSN 1741-8410
Ku, H. and Wong, P. (2012) Contrast on tensile and flexural properties of glass powder reinforced epoxy composites: pilot study. Journal of Applied Polymer Science, 123 (1). pp. 152-161. ISSN 0021-8995
Hussin, Manal (2012) An investigation into the effect of material composition on the fundamental properties of permeable concrete. [Thesis (PhD/Research)] (Unpublished)
Ku, H. S. (2011) Relationship between different mechanical properties of phenol formaldehyde SLG-reinforced composites. Journal of Reinforced Plastics and Composites, 30 (15). pp. 1281-1292. ISSN 0731-6844
El Saliby, Ibrahim and Shon, Ho Kyong and Erdei, Laszlo and Kim, Jong-Beom and Kim, Jong-Ho (2011) Co-doped photocatalyst nanomaterials for effective utilisation of solar radiation. In: 8th Asia Pacific Conference on Sustainable Energy and Environmental Technologies (APCSEET 2011), 10-13 Jul 2011, Adelaide, South Australia.
Ismail, Siti A. and Chen, Guangnan and Baillie, Craig and Symes, Troy (2011) Energy uses for cotton ginning in Australia. Biosystems Engineering, 109 (2). pp. 140-147. ISSN 1537-5110
El Saliby, Ibrahim and Erdei, Laszlo and Shon, Ho Kyong and Kim, Jong Beom and Kim, Jong-Ho (2011) Preparation and characterisation of mesoporous photoactive Na-titanate microspheres. Catalysis Today, 164 (1). pp. 370-376. ISSN 0920-5861
Islam, Md Mainul and Kim, Ho Sung (2011) Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment. Journal of Materials Processing Technology, 211 (4). pp. 708-716. ISSN 0924-0136
El Saliby, Ibrahim and Erdei, Laszlo and Shon, Ho Kyong and Kim, Jong-Ho (2011) Development of visible light sensitive titania photocatalysts by combined nitrogen and silver doping. Journal of Industrial and Engineering Chemistry, 17 (2). pp. 358-363. ISSN 1226-086X
Zhuge, Y. and Yeap, K. X. (2011) Assessment of debonding failure models for FRP retrofitted URM structures. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials , 7-10 Dec 2010, Melbourne, Australia.
Kabir, M. M. and Wang, H. and Cardona, F. and Aravinthan, T. (2011) Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites. In: 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21): Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.
Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275
Zhao, Yong-Qing and Cheung, Hoi-Yan and Lau, Kin-Tak and Xu, Cai-Ling and Zhao, Dan-Dan and Li, Hu-Lin (2010) Silkworm silk/poly(lactic acid) biocomposites: dynamic mechanical, thermal and biodegradable properties. Polymer Degradation and Stability, 95 (10). pp. 1978-1987. ISSN 0141-3910
Lau, Kin-Tak and Epaarachchi, Jayantha and Sudarshan, T. S. (2010) Sensors, actuators, and intelligent processing [Preface]. Materials and Manufacturing Processes, 25 (4). p. 211. ISSN 1042-6914
Trada, Mohan and Ku, Harry and Vedhar, Jayant (2009) Flexural strength of phenol formaldehyde composites post-cured in microwaves: preliminary results. Multi-Functional Materials and Structures II. pp. 1399-1402. ISSN 1022-6680
Yousif, B. F. and Devadas, Alvin and Yusaf, Talal (2009) Adhesive wear and frictional behaviour of multilayered polyester composite based on betelnut fiber mats under wet contact conditions. Surface Review and Letters, 16 (3). pp. 407-414. ISSN 0218-625X
Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.
Dahmani, L. and Khennane, A. and Kaci, S. (2009) Modeling and influence of shear retention parameter on the response of reinforced concrete structural elements. Strength of Materials, 41 (4). pp. 423-430. ISSN 0039-2316
Santhikumar, S. (2009) Uncertainty on application of bi-linear approximation to tension softening material near creep rupture region. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20): Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.
Ali, Noorahmad Bin (2005) Corrosion in the boiler tubes of the Tuas South Incineration Plant, Singapore. [USQ Project] (Unpublished)
Taylor, Brett C. (2004) Assessment of appropriate pressure vessel flange bolt tension by finite element modelling. [USQ Project] (Unpublished)
Yan, Wenyi and O'Dowd, Noel P. and Busso, Esteban P. (2002) Numerical study of sliding wear caused by a loaded pin on a rotating disc. Journal of the Mechanics and Physics of Solids, 50 (3). pp. 449-470. ISSN 0022-5096
Yan, Wenyi and Busso, Esteban P. and O'Dowd, Noel P. (2000) A micromechanics investigation of sliding wear in coated components. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 456 (2002). pp. 2387-2407. ISSN 1364-5021