|Up a level|
John, Benjamin Allan (2014) Optimisation of an electric powered air-gliding skateboard. [USQ Project] (Unpublished)
Yusaf, Talal and Hamawand, Ihsan and Schmidt, Erik and Binnie, James and Rees, Steven and Chakrabarty, Sayan (2014) Coals seam gas (CSG) in agriculture - a review: technical and market analysis for Australia. Sustainable Energy Technologies and Assessments, 8. pp. 149-158. ISSN 2213-1388
Ho, Thinh X. (2014) A three-dimensional model for transient performance of a solid oxide fuel cell. International Journal of Hydrogen Energy, 39 (12). pp. 6680-6688. ISSN 0360-3199
Shahiduzzaman, MD and Alam, Khorshed (2014) Interfuel substitution in Australia: a way forward to achieve environmental sustainability. The Australian Journal of Agricultural and Resource Economics , 58 (1). pp. 22-42. ISSN 1364-985X
Helwig, Andreas and Ahfock, Tony (2013) Extending SWER line capacity. In: 23rd Australasian Universities Power Engineering Conference (AUPEC 2013), 29 Sep–3 Oct 2013, Hobart, Australia.
Lanigan, Christopher John (2013) Implementation of a condition monitoring program for high voltage (HV) assets for the Santos GLNG Project. [USQ Project] (Unpublished)
Ellis, N. (2013) Inspection of power transmission lines using UAVs. [USQ Project] (Unpublished)
Helwig, Andreas and Ahfock, Tony (2013) Long-life nickel iron battery functionality/cost comparison for peak demand SWER network voltage support application. In: 23rd Australasian Universities Power Engineering Conference (AUPEC 2013), 29 Sep–3 Oct 2013, Hobart, Australia.
Geary, A. (2013) Model and analysis of a broken conductor (source isolated) earth fault on radial 11kV distribution feeders. [USQ Project] (Unpublished)
Couch, P. (2013) Subtransmission line cost reduction through optimised design, 132 kV Wellington-Dubbo case study. [USQ Project] (Unpublished)
Pasanduka, Timothy (2013) Systematic procedure to determine line current differential relay settings with back up distance for a 500 kV ac three phase line. [USQ Project] (Unpublished)
Mirazimi, S. J. and Salehi, B. and Tadayon, M. and Karshenas, H. R. (2013) Optimal relay placement in microgrids considering critical clearing time. In: Proceedings of the IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 Jun 2013, Langkawi, Malaysia.
Mirazimi, S. J. and Nematollahi, M. and Ashourian, M. H. and Mirahmadi, Sh. (2013) Reconfiguration and DG placement considering critical system condition. In: Proceedings of the IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 Jun 2013, Langkawi, Malaysia.
Nobbs, Rebecca (2012) Development of advanced SWER models for the Ergon Energy network. [USQ Project] (Unpublished)
Cameron, Rick (2012) Effects of on-board HHO and water injection in a diesel generator. [USQ Project] (Unpublished)
Duffy, Michael Anthony (2012) Investigation into the impacts on 11kV feeder operation as a result of the increasing use of amorphous core transformers. [USQ Project] (Unpublished)
Flynn, Christopher James (2012) MATLAB based energy market simulator. [USQ Project] (Unpublished)
Kamel, Fouad and Marwan, Marwan (2012) Demand-side response smart grid technique for optimized energy use. In: Innovation in power, control and optimization: emerging energy technologies. IGI Publishing (IGI Global), Hershey, PA, United States, pp. 137-163. ISBN 978-1-61350-138-2
Liu, Liwi and Liu, Yanju and Leng, Jinsong and Lau, Kin-tak (2011) Electromechanical stability of compressible dielectric elastomer actuators. Smart Materials and Structures, 20 (11). p. 115015. ISSN 0964-1726
Harriman, Adam J. (2011) Smart Grid for tomorrow’s electricity distribution. [USQ Project] (Unpublished)
Atem, Thiew (2011) The skid mounted substation. [USQ Project] (Unpublished)
Huweg, Abdurrahman F. S. and Kamel, Fouad and Raine, Steven (2011) Effect of electro-osmosis on soil-water potential and water chemistry in sand. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.
Marwan, M. and Kamel, F. (2011) Optimum demand side response of smart grid with renewable energy source and electrical vehicles. In: AUPEC 2011: Integrating Renewables into the Grid , 25-28 Sep 2011, Brisbane, Australia .
Yusaf, T. F. and Yousif, B. F. and Elawad, M. M. (2011) Crude palm oil fuel for diesel-engines: experimental and ANN simulation approaches. Energy, 36 (8). 4871-4878. ISSN 0360-5442
Burgess, R. and Ahfock, A. (2011) Minimising the risk of cross-country faults in systems using arc suppression coils. IET Generation, Transmission and Distribution, 5 (7). pp. 703-711. ISSN 1751-8687
Bose, Saswata and Kuila, Tapas and Nguyen, Thi Xuan Hien and Kim, Nam Hoon and Lau, Kin-tak and Lee, Joong Hee (2011) Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenge. Progress in Polymer Science, 36 (6). pp. 813-843. ISSN 0079-6700
Bangerter, Philip (2011) The latest on the thorium cycle as a sustainable energy source. In: 2011 Doctors and Scientists for Sustainability and Social Justice Meeting (D3SJ 2011) , 4 May 2011, Brisbane, Australia.
Marwan, M. and Kamel, F. and Xiang, W. (2011) Mitigation of electricity price/demand using demand side response smart grid model. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011), 27-29 Apr 2011, Brisbane, Australia.
Marwan, M. and Kamel, F. (2011) Demand side response to mitigate electrical peak demand in eastern and southern Australia. In: ICSGCE 2011: IEEE 1st International Conference on Smart Grid and Clean Energy Technologies, 27-30 Sep 2011, Chengdu, China.
Marwan, M. and Ledwich, G. and Ghosh, A. and Kamel, F. (2011) Integrating electrical vehicles to demand side response scheme in Queensland Australia. In: ISGT 2011: Smarter Grid for Sustainable and Affordable Energy Future, 13-16 Nov 2011, Perth, Western Australia.
Kist, Alexander A. (2011) Modelling of staged routing for reduced carbon footprints of large server clusters. International Journal of Communication Networks and Distributed Systems, 6 (1). pp. 28-44. ISSN 1754-3916
Burgess, R. and Ahfock, A. (2010) The use of arc-suppression coils in power systems with open-delta regulators. In: AUPEC 2010: Power Quality for the 21st Century, 5-8 Dec 2010, Christchurch, New Zealand.
Marwan, Marwan and Kamel, Fouad (2010) Demand-side response load management modelling encountering electrical peak demands in Eastern and Southern Australia: smart grid tools. In: AUPEC 2010: Power Quality for the 21st Century, 5-8 Dec 2010, Christchurch, New Zealand.
Marwan, Marwan and Kamel, Fouad and Xiang, Wei (2010) A demand-side response smart grid scheme to mitigate electrical peak demands and access renewable energy sources. In: 48th Annual Conference of the Australian Solar Energy Society (Solar 2010): Bringing Business and Research Together for a Better Tomorrow , 1-3 Dec 2010, Canberra, ACT. Australia.
Huweg, Abdurrahman F. S. and Kamel, Fouad and Raine, Steven (2010) Investigating the effect of electro-osmosis on sandy soil near saturated conditions. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.
Marwan, Marwan and Kamel, Fouad (2010) User-controlled electrical energy consumption towards optimized usage of electricity infrastructure. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia .
Aldraho, Abdelnour and Kist, Alexander A. (2010) Enhanced heuristics to reduce power consumption of networks using weight setting. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.
Aldraho, Abdelnour and Kist, Alexander A. (2010) Heuristics for dynamic topologies to reduce power consumption of networks. In: Australasian Telecommunication Networks and Applications Conference (ATNAC 2010), 31 Oct-3 Nov 2010, Auckland, New Zealand.
Haenke, Michael (2010) The development of a wind and solar power calculator for use within the private sector. [USQ Project] (Unpublished)
Mowat, David (2010) Callide C Power Station's generator protection system 'ride through capabilities' for various external faults. [USQ Project] (Unpublished)
Millers, Paul Gordon (2010) The effects of small distributed generation on the electrical distribution network. [USQ Project] (Unpublished)
Kamel, Fouad and Kist, Alexander A. and Marwan, Marwan (2010) Demand-side response towards optimizing energy and infrastructure usages in the electricity supply market: smart grid tools. In: Fusion Solutions: Challenges and Innovations, 26-27 May 2010, Townsville, Australia.
Kamel, Fouad and Kist, Alexander A. (2010) End-user's tools towards an efficient electricity consumption: the dynamic smart grid. In: PCO 2010: 3rd Global Conference on Power Control and Optimization , 2-4 Feb 2010, Gold Coast, Australia.
Ivanovich, Grujica S. (2010) Modern distribution network planning and application to development of electricity infrastructure. [Thesis (PhD/Research)] (Unpublished)
Cater-Steel, Aileen and Tan, Wui-Gee (2010) The role of IT service management in green IT. Australasian Journal of Information Systems, 17 (1). pp. 107-125. ISSN 1449-8618
Al Mahrouqi, Abdullah Khalfan (2009) Demand-supply interacting system towards a dynamic electrical energy management - the smart grid. [Thesis (PhD/Research)] (Unpublished)
Kist, Alexander A. (2009) Staged request routing for reduced carbon footprints of large scale server systems. In: Australasian Telecommunication Networks and Applications Conference (ATNAC 2009) , 9-11 Nov 2009, Canberra, Australia.
Kamel, Fouad (2009) Adequate electrical transmission and distribution networks capable to cater for extensive renewable energy utilization in Australia. In: 47th Annual Conference of the Australian and New Zealand Solar Energy Society (Solar09), 29 Sept - 2 Oct 2009, Townsville, Australia.
Drew, Aaron Matthew (2009) DEA control interface, power system analysis, synchronisation and load management controls - design, construction and commissioning. [USQ Project] (Unpublished)
Backman, Shane A. (2009) Development of a high voltage DLA test apparatus. [USQ Project] (Unpublished)
Sharma, R. and Parsons, D. and Sippell, B. (2009) Effects of replacing incandescent lamps with energy saving compact fluroescent lamps. In: 47th Annual Conference of the Australian and New Zealand Solar Energy Society (Solar 2009), 29 Sep-2 Oct 2009, Townsville, Australia.
Brandis, Cameron (2009) High voltage earthing system testing - an investigation into the effects of test lead coupling on test results. [USQ Project] (Unpublished)
Scoines, Barry William (2009) Replacement of steam turbine drive with electric drive. [USQ Project] (Unpublished)
Kamel, Fouad (2009) Solar energy to mitigate electrical diurnal peak demand in Queensland. In: 47th Annual Conference of the Australian and New Zealand Solar Energy Society (Solar09), 29 Sep - 2 Oct 2009, Townsville, Australia.
Kamel, Fouad (2009) User-controlled energy consumption in a transparent electricity system. In: 47th Annual Conference of the Australian and New Zealand Solar Energy Society (Solar09), 29 Sept - 2 Oct 2009, Townsville, Australia.
Gambetta, D. and Ahfock, A. (2009) Designing printed circuit stators for brushless permanent magnet motors. IET Electric Power Applications, 3 (5). pp. 482-490. ISSN 1751-8660
Sharma, R. and Ball, J. A. R. (2009) Unipolar stitched inverter low-frequency harmonics caused by stitching delay. IET Power Electronics, 2 (5). pp. 508-516. ISSN 1755-4535
Kamel, Fouad (2009) Potential of solar energy contribution in Queensland. In: EESA 2009: Electricity 2009 - Smart Grids, Smart Energy and Smart People, 5-7 Aug 2009, Gold Coast, Australia.
Kamel, Fouad (2009) Sharing communication network resources for a user-controlled electrical energy consumption. In: QUESTnet 2009: Leveraging our Investment, 7-10 Jul 2009 , Gold Coast, Australia. (Unpublished)
Baillie, Craig Peter and Chen, Guangnan (2009) A methodology for on farm energy assessment. In: 2009 RIRDC Life Cycle Assessment Workshop, 13 May 2009, Canberra, ACT.
Yang, Z. and Chen, G. and Duan, J. and Peng, T. and Wang, J. (2009) Development strategy of agricultural machinery based on energy-saving in China. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.
Kamel, Fouad (2009) Economics of solar energy for diurnal electrical demand in South-East Queensland. In: AUPEC 2009: Sustainable Energy Technologies and Systems, 27-30 Sep 2009, Adelaide, South Australia.
Kamel, Fouad and Kist, Alexander A. (2009) End-user’s tools towards an efficient electricity consumption: the dynamic smart grid. In: SSEE 2009: Solutions for a Sustainable Planet, 22-24 Nov 2009, Melbourne, Australia .
Ismail, Siti Amni and Chen, Guangnan and Baillie, Craig and Symes, Troy (2009) Evaluation of energy usage for cotton ginning processes. In: SEAg 2009: Agricultural Technology in a Changing Climate, 13-16 Sep 2009, Brisbane, Queensland.
Kamel, Fouad (2008) Design approach for photovoltaic power stations for demand-side requirements and competitive energy cost. In: 3rd International Solar Energy Society Conference, Asia Pacific Region (ISES-AP 2008), incorporating the 46th Annual Conference of the Australian and New Zealand Solar Energy Society (Solar08), 25-28 Nov 2008, Sydney, Australia.
Hancock, Nigel (2008) Method and apparatus for measuring electrical conductivity. AG01N2702FI .
Yusaf, Talal and Buttsworth, David R. (2007) Characterisation of mixing rate due to high power ultrasound. Ultrasonics Sonochemistry, 14 (2). pp. 266-274. ISSN 1350-4177
Ahfock, T. and Wells, C. G. (2007) A practical demonstration of electromagnetic braking. In: AUPEC 2007: 17th Australasian Universities Power Engineering Conference , 9-12 Dec 2007, Perth, Western Australia.
Gianoulis, Cosmas (2006) Investigate the use of thermal protection for underground cables in Ergon Engery's electricity network. [USQ Project] (Unpublished)
Wells, Colin G. and Ball, James A. R. (2006) Attenuation of a shielded rectangular dielectric rod waveguide. IEEE Transactions on Microwave Theory and Techniques, 54 (7). pp. 3013-3018. ISSN 0018-9480
Fowler, Jason (2006) Cost effectiveness of suburban street lighting. [USQ Project] (Unpublished)
Miletic, Alista (2005) Current controller for inverter bridge designed for grid-connected photovoltaic system. [USQ Project] (Unpublished)
Parsons, David (2005) Rechargeables have the edge - environmentally. What's New in Electronics, 25 (5). pp. 40-41. ISSN 0728-3873
Ong, Gimhua (2005) Software development for power system analysis. [USQ Project] (Unpublished)
Hewitt, Andrew and Ahfock, Tony L. and Suslov, Sergey A. (2005) Magnetic flux density distribution in axial flux machine cores. IET Electric Power Applications, 152 (2). pp. 192-196. ISSN 1350-2352
Sharma, Ronald (2005) Removal of DC offset current from transformerless PV inverters connected to utility. In: 40th International Universities Power Engineering Conference (UPEC 2005), 7-9 Sept 2005, Cork, Ireland.
Gray, David Thomas Chalmer (2004) Impact of demand-side management on substations. [USQ Project] (Unpublished)
Gibbings, Peter and Manuel, Brent and Penington, Rafe and McDougall, Kevin (2001) Assessing the accuracy and integrity of RTK GPS beneath high voltage power lines. In: 42nd Australian Surveyors Congress 2001: A Spatial Odyessy, 25-28 Sep 2001, Brisbane, Australia.
Hamed, Mohammad and Kamel, Fouad and Esmail, Durriah and Daoud, Ahmad (1998) The distribution of currents and voltages in a short ring transmission system. Electric Power Systems Research, 46 (2). pp. 83-99. ISSN 0378-7796
Kamel, Fouad (1989) A design factor for photovoltaic power stations. In: 9th European Communities Photovoltaic Solar Energy Conference, 25-29 Sept 1989, Freiburg, Germany.