Browse by Fields of Research (ANZSRC 2008)

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Number of items at this level: 338.

Ferdous, Wahid and Manalo, Allan (2014) Failures of mainline railway sleepers and suggested remedies – review of current practice. Engineering Failure Analysis, 44. pp. 17-35. ISSN 1350-6307

Manalo, Allan C. and Karunasena, Warna and Sirimanna, Chamila and Maranan, Ginghis B. (2014) Investigation into fibre composites jacket with an innovative joining system. Construction and Building Materials, 65. pp. 270-281. ISSN 0950-0618

Ferdous, Wahid and Manalo, Allan and Khennane, Amar and Kayali, Obada (2014) Benefits of geopolymer concrete-filled FRP beams and its flexural behaviour. In: Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World, 7–9 Apr 2014, Newcastle, Australia.

Muttashar, Majid and Manalo, Allan and Karunasena, Warna and Lokuge, Weena (2014) Flexural and axial behavior of pultruded GFRP hollow sections filled with low strength concrete. In: Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World, 7–9 Apr 2014, Newcastle, Australia.

Hizam, R. M. and Karunasena, Warna and Manalo, Allan C. (2014) An experimental investigation on the effect of threaded bolt on the double lap joint strength of pultruded fibre reinforced polymer. In: Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World, 7–9 Apr 2014, Newcastle, Australia.

Zulkarnain, Azwa (2014) Moisture absorption and hydrothermal aging in bamboo fibre/polyester composite. In: Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World, 7–9 Apr 2014, Newcastle, Australia.

Ferdous, Wahid and Manalo, Allan and Van Erp, Gerard (2014) Structural optimisation of composite railway sleeper. In: Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World, 7–9 Apr 2014, Newcastle, Australia.

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2014) Tensile properties of glass fibre reinforced recycled mixed plastic composites. In: Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World, 7–9 Apr 2014, Newcastle, Australia.

Chong, Albert K. and Al-Baghdadi, Jasim Ahmed Ali and Alshadli, Duaa (2014) High definition video cameras for measuring movement of vibrating bridge structure. In: International Conference on Vibration and Vibro-acoustics (ICVV2014), 13-15 Jan 2014, Harbin, China.

Nguyen, T. and Ghabraie, K. and Tran-Cong, T. (2014) Applying bi-directional evolutionary structural optimisation method for tunnel reinforcement design considering nonlinear material behaviour. Computers and Geotechnics , 55. pp. 57-66. ISSN 0266-352X

Karunasena, W. and Jayatilake, I. and Lokuge, W. (2013) Free vibration behaviour of fibre composite sandwich beams with debonds. In: 4th International Conference on Structural Engineering and Construction Management 2013 (ICSECM 2013), 13-15 Dec 2013, Kandy, Sri Lanka.

Sirimanna, C. S. and Karunasena, W. and Manalo, A. C. and Banerjee, S. and McGarva, L. (2013) Analysis of internal bonded fibre reinforced composite repair systems for corroded steel pipelines. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 Dec 2013, Melbourne, Australia .

Manalo, A. C. and Karunasena, W. and Sirimanna, C. and Maranan, G. (2013) Fibre composites pile rehabilitation and concrete formwork jacket - Concept development and finite element analysis. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 December 2013, Melbourne, Australia.

Maranan, G. B. and Manalo, A. C. (2013) Investigation on the mechanical behavior of hybrid fibre reinforced polymer composite beam. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 December 2013, Melbourne, Australia.

Manalo, A. C. (2013) The effect of shear span-to-depth ratio and test set-up on the behavior of fibre composite sandwich structure. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 Dec 2013, Melbourne, Australia .

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2013) Analysis of a railway turnout system with a spot replacement sleeper. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Kahandawa, Gayan C. and Epaarachchi, Jayantha and Wang, Hao and Canning, John and Lau, K. T. (2013) Extraction and processing of real time strain of embedded FBG sensors using a fixed filter FBG circuit and an artificial neural network. Measurement: Journal of the International Measurement Confederation , 46 (10). pp. 4045-4051. ISSN 0263-2241

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2013) Dynamic behaviour of debonded GFRP composite beams. Journal of Multifunctional Composites, 1 (2). pp. 113-122. ISSN 2168-4246

Manalo, Allan (2013) Fibre reinforced polymer composites sandwich structure: Recent developments and applications in civil infrastructure. In: 2013 International Research Conference on Innovations in Engineering, Science and Technology (IRCIEST 2013), 27-29 Nov 2013, Batangas State University, Batangas, Philippines.

Lokuge, Weena and Aravinthan, Thiru (2013) Comparative assessment of polymer concrete with different types of resin. In: Concrete 2013: Understanding Concrete , 16-18 Oct 2013, Gold Coast, Australia.

Lokuge, Weena and Karunasena, W. and Heemskerk, Colin (2013) Effect of strain rate on geopolymer concrete. In: Concrete 2013: Understanding Concrete, 16-18 Oct 2013, Gold Coast, Australia.

Brailsford, Steven (2013) Cathodic protection of reinforced concrete bridges in the marine environment as an asset management tool. [USQ Project] (Unpublished)

Lokuge, Weena and Aravinthan, Thiru (2013) Effect of fly ash on the behaviour of polymer concrete with different types of resin. Materials and Design, 51. pp. 175-181. ISSN 0264-1275

Serra, Michael Peter (2013) Geotechnical stability analysis using student versions of FLAC, PLAXIS and SLOPE/W. [USQ Project] (Unpublished)

Sams, Mathew Steven (2013) Numerical and physical modelling of a 2D tunnel heading at collapse. [USQ Project] (Unpublished)

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2013) Shear behaviour of glued structural fibre composite sandwich beams. Construction and Building Materials, 47. pp. 1317-1327. ISSN 0950-0618

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. (2013) Tensile properties of chemically treated hemp fibres as reinforcement for composites. Composites Part B: Engineering , 53. pp. 362-368. ISSN 1359-8368

Manalo, Allan and Maranan, Ginghis and Van Erp, Gerard (2013) Glue-laminated composite sandwich beams for structural engineering and construction. In: Thirteenth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC13), 11-13 Sept 2013, Sapporro, Japan.

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2013) Significance analysis of flexural behaviour of hybrid sandwich panels. Open Journal of Civil Engineering, 3 (3B). pp. 1-7. ISSN 2164-3164

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2013) Effect of eccentricity on the behavior of pultruded FRP bolted joint. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2013) Wave propogation scattering due to defect on thin composite plates. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Peauril, J. and Epaarachchi, J. and Lau, K. T. and Wang, H. (2013) Embedded fibre optic sensors under multi-axial loading: a pilot study. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Lau, K. T. (2013) Indexing damage using distortion of embedded FBG sensor response spectra. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Hafizi, Z. M. and Kahandawa, G. C. and Epaarachchi, J. and Lau, K. T. and Canning, J. and Cook, K. (2013) NIR fibre bragg grating as dynamic sensor: an application of 1D digital wavelet analysis for signal denoising. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2013) Effect of skin-core debonding on the dynamic behaviour of GFRP composite beams. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak (2013) Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs. Composite Structures, 100. pp. 40-54. ISSN 0263-8223

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2013) Mechanical properties characterization of the skin and core of a novel composite sandwich structure. Journal of Composite Materials, 47 (14). pp. 1785-1800. ISSN 0021-9983

Manalo, A. C. (2013) Behaviour of fibre composite sandwich structures under short and asymmetrical beam shear tests. Composite Structures, 99. pp. 339-349. ISSN 0263-8223

Guades, Ernesto and Aravinthan, Thiru and Manalo, Allan and Islam, Mainul (2013) Damage modelling of repeatedly impacted square fibre-reinforced polymer composite tube. Materials and Design, 47. pp. 687-697. ISSN 0264-1275

Manalo, Allan (2013) Structural behaviour of a prefabricated composite wall system made from rigid polyurethane foam and magnesium oxide board. Construction and Building Materials, 41. pp. 642-653. ISSN 0950-0618

Guades, Ernesto and Aravinthan, Thiru and Manalo, Allan and Islam, Mainul (2013) Experimental investigation on the behaviour of square FRP composite tubes under repeated axial impact. Composite Structures, 97. pp. 211-221. ISSN 0263-8223

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Manalo, Allan (2013) Geometry and restraint effects on the bending behaviour of the glass fibre reinforced polymer sandwich slabs under point load. Materials and Design, 45. pp. 125-134. ISSN 0264-1275

Ye, Lieping and Ma, Qianli and Miao, Zhiwei and Guan, Hong and Zhuge, Yan (2013) Numerical and comparative study of earthquake intensity indices in seismic analysis. Structural Design of Tall and Special Buildings, 22 (4). pp. 362-381. ISSN 1541-7794

Guades, Ernesto and Aravinthan, Thiru (2013) Residual properties of square FRP composite tubes subjected to repeated axial impact. Composite Structures, 95. pp. 354-365. ISSN 0263-8223

Hussin, M. K. and Zhuge, Y. and Bullen, F. and Lokuge, W. P. (2013) A mathematical model for complete stress-strain curve prediction of permeable concrete. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 2012): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2013) A review of FRP composite truss systems and its connection. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22): Materials to Structures: Advancement through Innovation , 11-14 Dec 2012, Sydney, Australia.

Guades, E. J. and Aravinthan, T. and Manalo, A. C. and Islam, M. M. (2013) Effects of energy level and impact repetitions on the impact fatigue behaviour and post-impact flexural properties of square FRP pultruded tubes. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2013) Hybrid sandwich panel with natural fibre composite intermediate layer: Manufacturing process and significance analysis. Malaysian Journal of Civil Engineering, 25 (Special issue 1). pp. 95-111.

Shamsuddoha, M. and Islam, M. M. and Aravinthan, T. and Manalo, A. C. and Lau, K. T. (2013) Mechanical properties of epoxy grouts for structural repair. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Hafizi, Mohd Zohari and Epaarachchi, Jayantha Ananda and Lau, K. T. (2013) Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test. In: 4th Asia-Pacific Workshop on Structural Health Monitoring (APWSHM 2012), 5-7 Dec 2012, Melbourne, Australia.

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2013) Multi-objective design optimisation of GFRP sandwich beams. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Lau, K.T. (2013) Prediction of obsolete FBG sensor using ANN for efficient and robust operation of SHM systems. Key Engineering Materials, 558. pp. 546-553. ISSN 1013-9826

Bajracharya, R. M. and Lokuge, W. P. and Karunasena, W. and Lau, K. T. and Mosallam, A. S. (2013) Structural evaluation of concrete expanded polystyrene sandwich panels for slab applications. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 2012): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of full-scale railway turnout sleepers from glue-laminated fibre composite sandwich structures. Journal of Composites for Construction, 16 (6). pp. 724-736. ISSN 1090-0268

Aravinthan, T. (2012) Composites in civil infrastructure – R&D to applications. In: 6th International Composites Conference (ACUN 6): Composites and Nanocomposites in Civil, Offshore and Mining Infrastructure , 14-16 Nov 2012, Melbourne, Australia.

Lokuge, W. and Eberhard, D. and Karunasena, W. (2012) Geopolymer concrete with FRP confinement. In: 6th International Composites Conference (ACUN 6): Composites and Nanocomposites in Civil, Offshore and Mining Infrastructure , 14-16 Nov 2012, Melbourne, Australia.

Manalo, A. C. (2012) Recent developments on fibre composite sandwich structures in civil infrastructure. In: 6th International Composites Conference (ACUN 6): Composite and Nanocomposites in Civil, Offshore and Mining Infrastructure, 14-16 Nov 2012, Melbourne, Australia.

Falzon, P. and Leong, K. H. and McGarva, L. and Leong, Y. L. and Manalo, A. and Virk, A. and Leipnik, D. and Djukic, L. (2012) Development and assessment of a carbon fibre reinforced composite repair system. In: 8th Asian-Australasian Conference on Composite Materials, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8) :Composites: Enabling Tomorrow’s Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Mills, Julie E. and Ma, Xing and Zhuge, Yan (2012) Experimental study on multi-panel retrofitted steel transmission towers. Journal of Constructional Steel Research, 78. pp. 58-67. ISSN 0143-974X

Hemming, Steven (2012) Sandwich panels for slab applications. [USQ Project] (Unpublished)

Klinge, Craig Desmond (2012) Behaviour of gang-nail plated timber joints in tension perpendicular to the grain. [USQ Project] (Unpublished)

O'Leary, Haydn (2012) Dynamic characterisation of cellular cores and sandwich beams. [USQ Project] (Unpublished)

Reed, Mark Edward (2012) Effects of fibres and curing temperature on geopolymer concrete. [USQ Project] (Unpublished)

Chong, Albert K. (2012) Energy-efficient technique for engineering structural monitoring in the dark. In: International Conference on Civil, Architectural and Hydraulic Engineering (ICCAHE 2012), 10-12 Aug 2012, Zhangaijie, China.

Zhuge, Yan and Mills, Julie E. and Ma, Xing (2012) Modelling of steel lattice tower angle legs reinforced for increased load capacity. Engineering Structures, 43. pp. 160-168. ISSN 0141-0296

Kahandawa, Gayan Chanaka (2012) Monitoring damage in advanced composite structures using embedded fibre optic sensors. [Thesis (PhD/Research)] (Unpublished)

Manalo, Allan and Mutsuyoshi, Hiroshi and Matsui, Takahiro (2012) Testing and characterization of thick hybrid fibre composites laminates. International Journal of Mechanical Sciences , 63 (1). pp. 99-109. ISSN 0020-7403

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of glued fibre composite sandwich structure in flexure: experiment and fibre model analysis. Materials and Design, 39. pp. 458-468. ISSN 0264-1275

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2012) Experimental and numerical analysis of an innovative GFRP sandwich floor panel under point load. Engineering Structures, 41. pp. 126-135. ISSN 0141-0296

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

Tawfik, Qaidar H. and Karunasena, Warna (Karu) and Cardona, Francisco (2012) Strengthening of corroded steel angles using CFRP. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

Islam, Md Mainul and Aravinthan, Thiru and Williams, Paul Garreth (2012) Behaviour of pultruded FRP hollow sections under eccentric loading. In: 6th International Conference on FRP Composites in Civil Engineering (CICE 2012), 13-15 Jun 2012, Rome, Italy.

Aravinthan, Thiru and Manalo, Allan (2012) Field applications and case studies of FRP in civil infrastructure: the Australian experience. In: 6th International Conference on FRP Composites in Civil Engineering (CICE 2012) , 13-15 Jun 2012, Rome, Italy.

Ghabraie, Kazem (2012) Applications of topology optimization techniques in seismic design of structure. In: Structural seismic design optimization and earthquake engineering: formulations and applications. IGI Publishing (IGI Global), pp. 232-268. ISBN 1466616407

Guades, Ernesto and Aravinthan, Thiru and Islam, Mainul and Manalo, Allan (2012) A review on the driving performance of FRP composite piles. Composite Structures, 94 (6). pp. 1932-1942. ISSN 0263-8223

Manalo, A. C. and Aravinthan, T. and Mutsuyoshi, H. and Matsui, T. (2012) Composite behaviour of a hybrid FRP bridge girder and concrete deck. Advances in Structural Engineering, 15 (4). pp. 589-600. ISSN 1369-4332

Ma, Xing and Mills, Julie E. and Brown, Graham and Zhuge, Yan (2012) A force method model for static analysis of transmission line system subjected to in-plane and out-of-plane loadings. In: ICTAS 2011: 4th International Conference on Technology of Architecture and Structure, 22-24 Sep 2011, Xi'an, China.

Ho, Mei-po and Lau, Kin-tak (2012) Design of an impact resistant glass fibre/epoxy composites using short silk fibres. Materials and Design, 35 (1). pp. 664-669. ISSN 0261-3069

Manalo, Allan C. and Aravinthan, Thiru (2012) Mechanical behaviour of a new type of fibre composite railway sleeper. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Karu (2012) Prediction of the flexural behavior of fibre composite sandwich beams. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Aravinthan, Thiru (2012) Research and development of fibre composites in civil infrastructure - the Australian experience [Keynote address]. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Guades, Ernesto J. and Aravinthan, Thiru and Islam, Md. Mainul and Manalo, Allan C. (2012) Stiffness of FRP pultruded tubes under repeated axial impacts. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Manalo, Allan and Mutsuyoshi, Hiroshi (2012) Behavior of fiber-reinforced composite beams with mechanical joints. Journal of Composite Materials, 46 (4). pp. 483-496. ISSN 0021-9983

Awad, Ziad K. and Yusaf, Talal (2012) Fibre composite railway sleeper design by using FE approach and optimization techniques. Structural Engineering and Mechanics, 41 (2). pp. 231-242. ISSN 1225-4568

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Stevens, Nick (2012) Analysis of a typical railway turnout sleeper system using grillage beam analogy. Finite Elements in Analysis and Design, 48 (1). 1376-1391 . ISSN 0168-874X

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2012) A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials and Design, 33 (1). pp. 534-544. ISSN 0264-1275

Sirimanna, Chamila Sampath and Lokuge, Weena and Islam, Md Mainul and Aravinthan, Thiru (2012) Compressive strength characterization of polyester based fillers. In: PFAM 20: 20th International Symposium on Processing and Fabrication of Advanced Materials, 15-18 Dec 2011, Hong Kong.

Choy, Y. S. and Liu, Y. and Lau, K. T. (2012) Duct noise control by using very light composite plate. Advanced Materials Research, 410. pp. 361-365. ISSN 1022-6680

Ku, H. and Donald, M. and Cardona, F. and Trada, M. (2012) Flexural properties of sawdust-reinforced epoxy composites post-cured in microwaves. Journal of Composite Materials, 46 (22). pp. 2879-2890. ISSN 0021-9983

Ku, H. and Prajapati, M. and Trada, M. (2012) Fracture toughness of vinyl ester composites reinforced with sawdust and postcured in microwaves. International Journal of Microwave Science and Technology, 2012 (Articl). ISSN 1687-5826

Hafizi, Z. M. and Epaarachchi, J. and Nizwan, C. K. E. and Lau, K. T. (2012) Non-velocity based analysis of passive ultrasonic signal for source lLocation detection in composite plates: a pilot study. IOP Conference Series: Materials Science and Engineering, 36 (1). ISSN 1757-8981

Awad, Ziad Khalaf (2012) Novel fibre composite civil engineering sandwich structures: behaviour, analysis, and optimum design. [Thesis (PhD/Research)] (Unpublished)

Cardona, Francisco and Tawfik, Qaidar H. and Karunasena, Karu (2012) Reinforcement of corroded steel structures with CFRP panels. In: ICACE 2012: International Conference on Architectural and Civil Engineering, 24-25 Oct 2012, Bali, Indonesia.

Aravinthan, Thiru and Lokuge, Weena and Manalo, Allan (2011) Effectiveness of formative online quizzes in learning and teaching a structural engineering course. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2011) Flexural strength of sandwich panel with lignocellulosic composites intermediate layer – a statistic approach. International Journal of Protective Structures, 2 (4). pp. 453-464. ISSN 2041-4196

Aravinthan, Thiru and Manalo, Allan (2011) Student performance in an online postgraduate course on fibre composites for civil engineers. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Shiau, Jim and Al Abri, Mohammed (2011) A study on the failure mechanisms of horizontal plate anchors in clay. In: ICAGE 2011: International Conference on Advances in Geotechnical Engineering, 7-9 Nov 2011, Perth, Western Australia.

Lian, C. and Zhuge, Y. and Beecham, S. (2011) The relationship between porosity and strength for porous concrete. Construction and Building Materials, 25 (11). pp. 4294-4298. ISSN 0950-0618

Shiau, J. S. and Merifield, R. S. and Lyamin, A. V. and Sloan, S. W. (2011) Undrained stability of footings on slopes. International Journal of Geomechanics, 11 (5). pp. 381-390. ISSN 1532-3641

Lokuge, Weena and Aravinthan, Thiru and Sirimanna, Chamila Sampath and Islam, Mainul (2011) Influence of fly ash proportions on properties of polymer cconcrete with polyester resin. In: Concrete 2011: Building a Sustainable Future, 12-14 Oct 2011, Perth, Western Australia.

O'Keeffe, Andrew (2011) Behaviour of polymer concrete for infilling fibre composite tubes. [USQ Project] (Unpublished)

Tomkins, Brock William (2011) Chemical resistance of geopolymer concrete against H2SO4 & NaOH. [USQ Project] (Unpublished)

Brown, Steven (2011) Design of a high-shear geopolymer concrete mixer. [USQ Project] (Unpublished)

Dakin, Anthony (2011) Investigation of the suitability of finger jointed structural timber for use in nail plated roof trusses. [USQ Project] (Unpublished)

Veenstra, Nathaniel (2011) Optimum strut-and-tie model for a cantilever curved wall. [USQ Project] (Unpublished)

Dudley, Samuel (2011) Stability of underground tunnelling using relaxation techniques. [USQ Project] (Unpublished)

Prasad, Nitesh Nitin (2011) Verification of simplified optimum designs for reinforced concrete beams. [USQ Project] (Unpublished)

Manalo, Allan C. and Aravinthan, Thiru (2011) Flexural behaviour of glulam beams from novel sandwich panels. In: 16th International Conference on Composite Structures (ICCS 16), 28-30 July 2011, Porto, Portugal.

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2011) The implementation of statistical inference to study the bending strength of sustainable hybrid sandwich panel composite. In: CEABM 2011: 1st International Conference on Civil Engineering, Architecture and Building Materials, 18-20 Jun 2011, Haikou, China.

Guades, E. J. and Aravinthan, T. and Islam, M. M. (2011) Driveability of composite piles. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011) , 27-29 Apr 2011, Brisbane, Australia.

Manalo, A. C. and Aravinthan, T. (2011) The effects of fibre wraps on the flexural behaviour of glulam composite sandwich beams. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011), 27-29 Apr 2011, Brisbane, Australia.

Mutsuyoshi, Hiroshi and Hai, Nguyen Duc and Shiroki, Kensuke and Aravinthan, Thiru and Manalo, Allan (2011) Experimental investigation of HFRP composite beams. In: FRPRCS-10: 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures , 2-4 Apr 2011, Tampa, FL. United States.

Ku, H. and Wong, P. and Huang, J. and Fung, H. and Mohan, T. (2011) Tensile tests of glass powder reinforced epoxy composites: pilot study. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

Manalo, Allan (2011) Behaviour of fibre composite sandwich structures: a case study on railway sleeper application. [Thesis (PhD/Research)] (Unpublished)

Awad, Ziad K. and Yusaf, Talal F. (2011) Finite element analysis of fibre reinforce concrete beam subject to high temperature by using EURO-code models. In: ICCST8: 8th International Conference on Composite Science and Technology, 22-24 Mar 2011, Kuala Lumpur, Malaysia.

Sirimanna, Chamila Sampath and Islam, Md Mainul and Aravinthan, Thiru (2011) Polymer based filler materials as infill for GFRP pile connector. In: ICCST8: 8th International Conference on Composite Science and Technology, 22-24 Mar 2011, Kuala Lumpur, Malaysia.

Banerjee, Sourish (2011) Creep response of polymeric honeycombs. In: 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX) , 14-17 Jan 2011, Auckland, New Zealand.

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2011) A comparison of the shear behaviour of a fibre composite sandwich structure in the transverse and in-plane directions. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials , 7-10 Dec 2010, Melbourne, Australia.

Zhuge, Y. and Yeap, K. X. (2011) Assessment of debonding failure models for FRP retrofitted URM structures. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials , 7-10 Dec 2010, Melbourne, Australia.

Guades, E. J. and Sirimanna, C. S. and Aravinthan, T. and Islam, M. M. (2011) Behaviour of fibre composite pile under axial compression load. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Sirimanna, Chamila S. (2011) Behaviour of fibre composite piles for timber pile rehabilitation. [Thesis (PhD/Research)] (Unpublished)

Islam, M. M. and Aravinthan, T. (2011) Behaviour of fibre composite sandwich panels under uniformly distributed loading. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Hussin, Manal and Zhuge, Yan and Bullen, Frank and Lokuge, Weena (2011) Laboratory evaluation of the stress-strain relationship of permeable concrete. In: CEABM 2011: 1st International Conference on Civil Engineering, Architecture and Building Materials , 18-20 Jun 2011, Haikou, China.

Zhuge, Y. and Mills, J. (2011) Modelling of multi-panel transmission tower retrofitted with leg reinforcement. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2011) Multi-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applications. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Lian, Chunqi and Zhuge, Yan and Beecham, Simon (2011) Numerical simulation of the mechanical behaviour of porous concrete. Engineering Computations: International Journal for Computer-Aided Engineering and Software, 28 (8). pp. 984-1002. ISSN 0264-4401

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2011) Preliminary development of polymer based filler materials for GFRP tubular connector. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Lokuge, W. P. and Setunge, S. and Sanjayan, J. G. (2011) Stress-strain model for high strength concrete confined by FRP. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Durack, James M. (2011) Structural engineering design practice. [Thesis (PhD/Research)] (Unpublished)

Karunasena, W. and Summerville, C. J. (2011) Structural performance of low grade timber slabs. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Manalo, A. C. and Aravinthan, T. and Karunasena, W. and Stevens, N. (2011) The effect of modulus of elasticity on the behaviour of railway turnout sleepers. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Sirimanna, Chamila S. and Islam, Md Mainul and Aravinthan, Thiru (2010) Effects of temperature on a pultruded FRP composite. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Western Australia.

Islam, Md Mainul and Aravinthan, Thiru (2010) Behaviour of structural fibre composite sandwich panels under point load and uniformly distributed load. Composite Structures, 93 (1). pp. 206-215. ISSN 0263-8223

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Warna (2010) Evaluation of the strength and stiffness of glue-laminated fibre composite sandwich panels for structural beam application. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Western Australia.

Aravinthan, T. and Heldt, T. (2010) Innovative strengthening technique using post-tensioned fibre composite wraps for bridge headstocks. Australian Journal of Structural Engineering, 11 (2). pp. 117-128. ISSN 1328-7982

Karunasena, Warna (2010) The effect of debonding on the natural frequencies of laminated fibre composite sandwich plates. In: 6th Australasian Congress on Applied Mechanics (ACAM 6) , 12-15 Dec 2010, Perth, Western Australia.

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2010) Investigation of frequency characteristics of GFRP/phenolic sandwich beams. In: 2010 Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

Guades, Ernesto Jusayan and Aravinthan, Thiru and Islam, Md Mainul (2010) An overview on the application of FRP composites in piling system. In: 2010 Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Queensland, Australia.

Kennedy, Jotham Ariel (2010) Experimental investigation into the uplift capacity of ground anchors in sand. [USQ Project] (Unpublished)

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Douglas, Steven (2010) Fibre composite sandwich beam: an alternative to railway turnout sleeper? In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Zhuge, Y. (2010) FRP-retrofitted URM walls under in-plane shear: review and assessment of available models. Journal of Composites for Construction, 14 (6). pp. 743-753. ISSN 1090-0268

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Aravinthan, Thiru (2010) The developments of structural health/integrity monitoring systems using FBG sensors at CEEFC of USQ. In: 2010 Southern Region Engineering Conference (SREC 2010) , 11-12 Nov 2010, Toowoomba, Australia.

Tawfik, Qaidar and Karunasena, Warna (Karu) (2010) Use of CFRP for rehabilitation of steel structures: a review. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Lewers, Glyn Alan (2010) Design of a frame/structure for a large wastewater treatment pond. [USQ Project] (Unpublished)

Daly, James (2010) Design, construction and performance of buildings foundations on soft clays in the Brisbane region. [USQ Project] (Unpublished)

Gibson, David Eric (2010) Evaluating comparative performance of various shaped bridge piers: experimental investigation of sediment transport and scouring. [USQ Project] (Unpublished)

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) Flexural behaviour of glue-laminated fibre composite sandwich beams. Composite Structures, 92 (11). pp. 2703-2711. ISSN 0263-8223

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) In-plane shear behaviour of fibre composite sandwich beams using asymmetrical beam shear test. Construction and Building Materials, 24 (10). pp. 1952-1960. ISSN 0950-0618

Bajracharya, Rohan Muni (2010) Structural evaluation of concrete-expanded polystyrene sandwich panels for slab applications. [USQ Project] (Unpublished)

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2010) Cost optimum design of structural fibre composite sandwich panel for flooring applications. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2010) Temperature effects on full scale FRP bridge using innovative composite components. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

Aravinthan, Thiru (2010) Challenges in the design and delivery of an online postgraduate course in fibre composites. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

Ku, H. and Trada, M. and Huq, R. (2010) A pilot study on the flexural properties of vinyl ester composites filled with glass powder. In: MFMS 2010: 3rd International Conference on Multi-Functional Materials and Structures, 14-18 Sep 2010, Jeonju, South Korea.

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Warna (2010) Shear behavior of glue-laminated composite sandwich beams. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna (2010) Behaviour of structural glulam beams from sustainable fibre composite sandwich panels. In: 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference (CECAR5 and ASEC2010): Innovative Community Building, 8-12 Aug 2010, Sydney, Australia.

Aravinthan, Thiru and Manalo, Allan and Douglas, Steve (2010) Development of a fibre composite turnout sleeper. In: 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference (CECAR5 and ASEC2010): Innovative Community Building, 8-12 Aug 2010, Sydney, Australia.

Ghabraie, Kazem and Chan, Ricky and Huang, Xiaodong and Xie, Yi Min (2010) Shape optimization of metallic yielding devices for passive mitigation of seismic energy. Engineering Structures, 32 (8). pp. 2258-2267. ISSN 0141-0296

Awad, Ziad K. and Gonzalez, Felipe and Aravinthan, Thiru (2010) Advanced robust design optimization of FRP sandwich floor panels. IOP Conference Series: Materials Science and Engineering, 10 (1). 012182,1-012182,9. ISSN 1757-899X

Ku, H. and Trada, M. and Nixon, R. and Wong, P. (2010) Flexural properties of phenolic resin reinforced with glass powder: preliminary results. Journal of Applied Polymer Science, 116 (1). pp. 347-354. ISSN 0021-8995

Dahmani, L. and Khennane, A. and Kaci, S. (2010) Crack identification in reinforced concrete beams using ANSYS software. Strength of Materials, 42 (2). pp. 232-240. ISSN 0039-2316

Manalo, A. C. and Aravinthan, T. and Karunasena, W. and Islam, M. M. (2010) Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions. Composite Structures, 92 (4). 984-995 . ISSN 0263-8223

Manalo, A. and Aravinthan, T. and Karunasena, W. and Ticoalu, A. (2010) A review of alternative materials for replacing existing timber sleepers. Composite Structures, 92 (3). pp. 603-611. ISSN 0263-8223

Zhuge, Yan (2010) Investigation of the effect of various additives on the strength of environmentally friendly permeable concrete. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Ku, H. and Trada, M. and Cecil, T. and Wong, P. (2010) Tensile tests of phenol formaldehyde glass-powder-reinforced composites: pilot study. Journal of Applied Polymer Science, 116 (1). pp. 10-17. ISSN 0021-8995

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2009) Flexural behaviour of laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

Karunasena, W. and Aravinthan, T. and Manalo, A. C. (2009) Vibration of debonded laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

Cole, Andrew James Shorten (2009) A comprehensive study of footing on c-φ soil slopes - numerical and physical modelling. [USQ Project] (Unpublished)

Lyle, Nathan Ross (2009) Comprehensive design charts for the footing on slope problem. [USQ Project] (Unpublished)

Ku, Harry S. and Trada, Mohan and Zong, Xuejin and Wong, Peter (2009) Flexural properties of phenolic resin reinforced with glass powder. In: ICAST 2009: 20th International Conference on Adaptive Structures and Technologies , 20-22 Oct 2009, Shatin, Hong Kong.

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2009) Finite element analysis of fibre composite sandwich panel. In: Southern Engineering Conference, 17-18 Oct 2009, Springfield, Queensland, Australia.

Saunders, Michael Joseph (2009) Investigation of the relationship between experimental bridge piers and erosion within a flow. [USQ Project] (Unpublished)

Yu, Yu Wah (2009) Pile driving analysis via dynamic loading test. [USQ Project] (Unpublished)

Manalo, Allan and Mutsuyoshi, Hiroshi and Aravinthan, Thiru and Matsui, Takahiro (2009) Behaviour of hybrid FRP composite I-girder with concrete deck. In: FRPRCS-9: Current Challenges and Future Trends, 13-15 July 2009, Sydney, Australia.

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Islam, Mainul (2009) Flexural behaviour of composite sandwiches for structural applications. In: FRPRCS-9: Current Challenges and Future Trends, 13-15 Jul 2009, Sydney, Australia.

Wang, Bo and Teng, J. G. and De Lorenzis, Laura and Zhou, Li-Min and Ou, Jinping and Jin, Wei and Lau, K. T. (2009) Strain monitoring of RC members strengthened with smart NSM FRP bars. Construction and Building Materials, 23 (4). pp. 1698-1711. ISSN 0950-0618

Liang, Qing Quan (2009) Performance-based analysis of concrete-filled steel tubular beam–columns, part I: theory and algorithms. Journal of Constructional Steel Research, 65 (2). pp. 363-372. ISSN 0143-974X

Liang, Qing Quan (2009) Performance-based analysis of concrete-filled steel tubular beam–columns, part II: verification and applications. Journal of Constructional Steel Research, 65 (2). pp. 351-362. ISSN 0143-974X

Shinozaki, H. and Pandey, G. R. and Mutsuyoshi, H. and Aravinthan, T. (2009) AFRP retrofitting of RC structures in Japan. In: ACMSM20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2009) An improved quadrilateral flat element with drilling degrees of freedom for shell structural analysis. CMES: Computer Modeling in Engineering and Sciences, 49 (2). pp. 81-110. ISSN 1526-1492

Epaarachchi, J. A. (2009) Change of dynamic response of pultruded composite components used in advanced composite structures due to fatigue and fracture. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Zhuge, Yan and Yeap, Kai (2009) Debonding characteristics of masonry structures retrofitted with FRP. In: 17th Annual International Conference on Composites or Nano Engineering ICCE17, 26 Jul-1 Aug 2009, Honolulu, Hawaii, USA.

Omar, T. and Aravinthan, T. (2009) Design and development of a fibre composite windmill structure. Australian Journal of Structural Engineering, 10 (1). pp. 25-36. ISSN 1328-7982

Epaarachchi, J. A. and Karunasena, W. and Aravinthan, T. (2009) Dynamic behavior of hybrid composite bridge girder. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Epaarachchi, Jayantha A. and Birt, Peter (2009) Dynamic behaviour of laterally loaded pultruted composite beams. In: 9th International Conference of the Mechanical and Physical Behaviour of Materials Under Dynamic Loading (DYMAT 2009), 7-11 Sept 2009, Brussels, Belgium.

Vandenbroucke, A. and Cardona, F. and Ku, H. and Rogers, D. (2009) Effects of chopped hemp on mechanical and thermal properties of epoxy resins. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Omar, T. and Aravinthan, T. (2009) Fibre composite wind mill structure - investigations and design considerations. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao, eds. (2009) Futures in mechanics of structures and materials: proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), Toowoomba, Australia, 2-5 December 2008. Taylor & Francis (CRC Press), London, UK. ISBN 978-0-415-49196-9

Karunasena, W. and Leitch, C. J. (2009) Investigation on role and function of noggings in residential timber frame construction. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Manalo, A. C. and Mutsuyoshi, H. and Asamoto, S. and Aravinthan, T. and Matsui, T. (2009) Mechanical behavior of hybrid FRP composites with bolted joints. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Dahmani, L. and Khennane, A. and Kaci, S. (2009) Modeling and influence of shear retention parameter on the response of reinforced concrete structural elements. Strength of Materials, 41 (4). pp. 423-430. ISSN 0039-2316

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao (2009) Preface to futures in mechanics of structures and materials conference. ACMSM20. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Aravinthan, Thiru, ed. (2008) Fibre composites in civil infrastructure - past, present and future. University of Southern Queensland, Toowoomba, Australia.

Karunasena, W. (2008) Elastodynamic reciprocity relations for wave scattering by flaws in fiber-reinforced composite plates. Journal of Mechanics of Materials and Structures, 3 (10). pp. 1831-1846. ISSN 1559-3959

Nguyen-Van, Hieu and Le, Thong and Mai-Duy, Nam and Tran-Cong, Thanh (2008) Nodal integration finite element techniques for analysis of piezoelectric solids. In: 2008 International Conference on Computational Solid Mechanics (CSM2008), 27-30 Nov 2008, Ho Chi Minh City, Vietnam.

Shiau, J. S. and Watson, J. F. (2008) 3D bearing capacity of shallow foundations located near deep excavation sites. In: 2008 International Conference on Deep Excavation: Challenges Risk Management of Underground Construction (ICDE 2008), 10-12 Nov 2008, Singapore.

Arnold, Matthew David (2008) A two-dimensional analysis of the bearing capacity of footings near slopes. [USQ Project] (Unpublished)

Gibson, Duane Nikalia (2008) Interaction of recycled concrete and geogrid reinforcement material 14m high reinforced earth wall. [USQ Project] (Unpublished)

Kelman, Oliver (2008) Measuring and monitoring of grain silos using laser scanning and total stations. [USQ Project] (Unpublished)

Waldock, David A. (2008) The maintenance of 'moment continuity' within structural concrete beam steps. [USQ Project] (Unpublished)

Aravinthan, Thiru and Omar, Tarek (2008) Fibre composite windmill structure - challenges in the design and development. In: CICE 2008: 4th International Conference on FRP Composites in Civil Engineering, 22-24 Jul 2008, Zurich, Switzerland.

Rong, Jian Hua and Liang, Qing Quan (2008) A level set method for topology optimization of continuum structures with bounded design domain. Computer Methods in Applied Mechanics and Engineering, 197 (17-18). pp. 1447-1465. ISSN 0045-7825

Omar, Tarek (2008) Multi-pultrusion fibre composite truss systems for deployable shelters. PhD thesis, University of Southern Queensland.

Liang, Qing Quan (2008) Nonlinear analysis of short concrete-filled steel tubular beam-columns under axial load and biaxial bending. Journal of Constructional Steel Research, 64 (3). pp. 295-304. ISSN 0143-974X

Goh, S. and Ku, H. and Ang, S. L. (2008) Prediction of crushing stress in composite materials. Journal of Composite Materials, 42 (5). pp. 467-484. ISSN 0021-9983

Rong, J. H. and Yi, J. H. and Liang, Q. Q. (2008) A level set method with maximum design domain limits. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2008) A node-based element for analysis of planar piezoelectric structures. CMES: Computer Modeling in Engineering and Sciences, 36 (1). pp. 65-95. ISSN 1526-1492

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2008) A smoothed four-node piezoelectric element for analysis of two-dimensional smart structures. CMES: Computer Modeling in Engineering and Sciences, 23 (3). pp. 209-222. ISSN 1526-1492

Ticoalu, A. and Aravinthan, T. and Karunasena, W. (2008) An investigation on the stiffness of timber sleepers for the design of fibre composite sleepers. In: 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 20): Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Suntharavadivel, Thuraichamy Guganesan (2008) Behaviour of shear damaged reinforced concrete beams strengthened with external post-tensioning and clamping. [Thesis (PhD/Research)] (Unpublished)

Omar, Tarek and Aravinthan, Thiru (2008) Design and development of a fibre composite wind mill structure. In: Australasian Structural Engineering Conference 2008: Engaging with Structural Engineering, 26-27 June 2008, Melbourne, Vic, Australia.

Asamoto, S. and Mutsuyoshi, H. and Aravinthan, T. and Suzukawa, K. (2008) Experimental investigation of innovative hybrid composite girders with GFRP and CFRP. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2008) M2S2 modular deployable shelter system: concept and analysis technique. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Liang, Q. Q. and Hadi, M. N. S. (2008) Nonlinear analysis and behavior of concrete-filled steel tubular beam-columns. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Shiau, Jim S. and Watson, Joshua Francis and Arnold, Matthew David (2008) Numerical study of a shallow foundation located near 45 degree slopes. In: ASEM 2008: 4th International Conference on Advances in Structural Engineering and Mechanics , 26-28 May 2008, Jeju, Korea.

Liang, Q. Q. and Ng, A. W. M. (2008) Performance-based optimization of strut-and-tie models in reinforced concrete deep beams. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Suntharavadivel, T. G. and Aravinthan, T. (2008) Strengthening of shear damaged RC beams with external clamping. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Karunasena, Warna (Karu) and Martin, Nicole (2007) The effect of debonding on the flexural behaviour of reinforced concrete beams strengthened with fibre reinforced polymer. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

Liang, Qing Quan (2007) Automated performance-based optimal design of continuum structures under multiple load cases. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

Liang, Qing Quan (2007) Effects of continuum design domains on optimal bracing systems for multistory steel building frameworks. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2007) Innovative all composite multi-pultrusion truss systems: FE modelling and behavioural issues. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

Liang, Qing Quan (2007) Performance-based optimization: a review. Advances in Structural Engineering, 10 (6). pp. 739-753. ISSN 1369-4332

Pandey, G. R. and Mutsuyoshi, H. and Aravinthan, T. (2007) Retrofitting reinforced concrete bridge frames using externally bonded FRP sheets. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

Liang, Qing Quan (2007) Structural design optimization. Advances in Structural Engineering, 10 (6). i-ii. ISSN 1369-4332

Omar, T. and Aravinthan, T. and Van Erp, G. (2007) The effect of core architecture on the behaviour of sandwich columns under edgewise compression loading. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

Aravinthan, Thiru and Suntharavadivel, T. G. (2007) Effects of existing shear damage on externally post tensioned repair of bent caps. Journal of Structural Engineering, 133 (11). pp. 1662-1669. ISSN 0733-9445

Wong Wan Sie, Winxie (2007) Analysis and design of curtain wall systems for high rise buildings. [USQ Project] (Unpublished)

Green, Christopher Ross (2007) Testing and analysis of fibre composite beams in a bridge structure. [USQ Project] (Unpublished)

Shinozaki, Hiroo and Aravinthan, Thiru and Pandey, Govinda Raj and Mutsuyoshi, Hiroshi (2007) Advancements in retrofitting reinforced concrete structures in Japan using FRP sheets. In: 23rd Biennial Conference of the Concrete Institute of Australia: Concrete for Future, 18-20 Oct 2007, Adelaide, Australia.

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2007) Analytical studies on externally post tensioned concrete girders with existing shear cracks. In: 23rd Biennial Conference of the Concrete Institute of Australia: Concrete for Future, 18-20 October 2007, Adelaide, Australia.

Aravinthan, Thiru (2007) A strengthening system: international patent for innovative structural strengthening using externally prestressed fibre wraps. WO 2006039755 20060420.

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2007) Innovative all composite multi-pultrusion truss system for stressed arch deployable shelters. In: AICSGE 6: 6th Alexandria International Conference on Structural and Geotechnical Engineering, 15-17 Apr 2007, Alexandria, Egypt.

Omar, T. and Van Erp, G. and Key, P. (2007) Modular deployable composite shelters - truss system. In: ACIC 2007: Advanced Composites in Construction Conference , 2-4 Apr 2007, Bath, UK.

Liang, Qing Quan and Uy, Brian and Liew, J. Y. Richard (2007) Local buckling of steel plates in concrete-filled thin-walled steel tubular beam-columns. Journal of Constructional Steel Research, 63 (3). pp. 396-405. ISSN 0143-974X

Ku, H. and Trada, M. and Puttgunta, V. C. (2007) Mechanical properties of vinyl ester composites cured by microwave irradiation: pilot study. Key Engineering Materials, 334-33. pp. 537-540. ISSN 1013-9826

Liang, Qing Quan and Uy, Brian and Bradford, Mark A. and Ronagh, Hamid R. (2007) Closure to 'Strength analysis of steel-concrete composite beams in combined bending and shear' by Qing Quan Liang, Brian Uy, Mark A. Bradford and Hamid R. Ronagh. Journal of Structural Engineering, 133 (2). pp. 309-310. ISSN 0733-9445

Wang, Hao and Fu, Huameng (2007) Development of bulk metallic glass composites. In: The world of bulk metallic glasses and their composites. Research Signpost, Kerala, India, pp. 73-92. ISBN 978-81-308-0196-4

Epaarachchi, Jayantha A. and Karunasena, Warna and Aravinthan, Thiru (2007) Investigation of dynamic behaviour of a hybrid composite bridge girder. In: 14th International Conference on Composite Structures (ICCS 14), 19 - 21 Nov 2007, Melbourne, Australia.

Uy, Brian and Liang, Qing Quan (2007) Preface [to the 2005 Australian Structural Engineering Conference (ASEC) issue of Australian Journal of Structural Engineering]. Australian Journal of Structural Engineering, 7 (2). ISSN 1328-7982

Liang, Qing Quan and Uy, Brian and Liew, J. Y. Richard (2007) Strength of concrete-filled steel box columns with buckling effects. Australian Journal of Structural Engineering, 7 (2). pp. 145-155. ISSN 1328-7982

Heron, Katherine Margaret Monica (2007) Vortex shedding on bridge piers. [USQ Project] (Unpublished)

Omar, T. and Van Erp, G. and Key, P. W. (2006) Stressed arch modular deployable composite shelters: concept and development. In: CICE 2006: 3rd International Conference on FRP Composites in Civil Engineering, 13-15 Dec 2006, Miami, Fl, USA.

Klein, Lindsay Edward (2006) Finite element analysis of a composite bridge deck. [USQ Project] (Unpublished)

Walker, Craig Louis (2006) Local and post-local buckling of steel tubes in thin-walled circular concrete-filed steel tubular columns. [USQ Project] (Unpublished)

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru and Luther, Stephen (2006) Shear strengthening of cracked RC beam using external post-tensioning. In: 19th Australasian Conference on the Mechanics of Structures and Materials, 29 Nov - 1 Dec 2006, Christchurch, NZ.

Bolger, Paul (2006) Strengthening of headstocks with vertical clamping to enhance shear capacity. [USQ Project] (Unpublished)

Breust, Tristan David (2006) The design and structural analysis of a steel portal framed shed for the Darling Downs Historical Rail Society. [USQ Project] (Unpublished)

Chiu, Kwong Man Karen (2006) The use of recycled concrete aggregate in structural concrete around South East Queensland. [USQ Project] (Unpublished)

Hossain, T. and Mendis, P. A. and Aravinthan, Thiru and Baker, Graham (2006) Torsional resistance of high-strength concrete beams. In: 19th Australasian Conference on the Mechanics of Structures and Materials, 29 Nov - 1 Dec 2006, Christchurch, NZ.

Kronk, Matthew Neil (2006) Ultimate strength of steel-concrete composite beams under combined bending and torsion. [USQ Project] (Unpublished)

Figg, Matthew Lorne (2006) Using renewable plantation timber as a replacement option for unrenewable hardwood girders in bridges. [USQ Project] (Unpublished)

Zhuge, Yan and Chuang, Shihwei (2006) Modelling of URM walls retrofitted with cable: a comparison between a basic mechanical model and distinct element method. Transactions of the Tianjin University, 12 (supp. ). pp. 171-176. ISSN 1006-4982

Johnson, K. and Lemcke, Pamela M. and Karunasena, W. and Sivakugan, Nagaratnam (2006) Modelling the load-deformation response of deep foundations under oblique loading. Environmental Modelling and Software, 21 (9). pp. 1375-1380. ISSN 1364-8152

Liang, Qing Quan (2006) Inelastic behavior of concrete-filled thin-walled steel tubular columns subjected to local buckling. In: 10th East Asia-Pacific Conference on Structural Engineering and Construction: Materials, Experimentation, Maintenance and Rehabilitation (EASEC-10) , 3-5 Aug 2006, Bangkok, Thailand.

Karunasena, Karu W. and Grice, Andrew (2006) Load-deformation behaviour prediction of timber beams externally reinforced with composite materials. In: 10th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-10), 3-5 August 2006, Bangkok, Thailand.

Liang, Qing Quan (2006) Performance-based optimization of strut-and-tie models in reinforced concrete beam-column connections. In: 10th East Asia-Pacific Conference on Structural Engineering and Construction: Materials, Experimentation, Maintenance and Rehabilitation (EASEC-10) , 3-5 Aug 2006, Bangkok, Thailand.

Liang, Qing Quan (2006) Post-local buckling of steel plates in concrete-filled thin-walled steel tubular columns under biaxial loading. In: 10th East Asia-Pacific Conference on Structural Engineering and Construction: Materials, Experimentation, Maintenance and Rehabilitation (EASEC-10), 3-5 Aug 2006, Bangkok, Thailand.

Hardeo, Pravendra and Karunasena, W. (Karu) (2006) Three dimensional finite element analysis of concrete filled FRP tubular model piles under lateral loads. In: International Composites Conference (ACUN-5), 11-14 July 2006, Sydney, Australia.

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2006) Effect of existing cracks in concrete bridge members strengthened by external post-tensioning. In: FIB 2006: 2nd Congress (Federation Internationale du Beton), 5-8 Jun 2006, Naples, Italy.

Aravinthan, Thiru (2006) Is external post-tensioning an effective solution for shear strengthening of bridge elements? In: Structural Faults + Repair 2006: Eleventh International Conference on ‘Extending the Life of Bridges Concrete + Composites Buildings, Masonry + Civil Structures', 13-15 June 2006, Edinburgh, UK.

Liang, Qing Quan and Uy, Brian and Liew, J. Y. Richard (2006) Nonlinear analysis of concrete-filled thin-walled steel box columns with local buckling effects. Journal of Constructional Steel Research, 62 (6). pp. 581-591. ISSN 0143-974X

Merifield, R. S. and Nguyen, V. Q. (2006) Two- and three-dimensional bearing-capacity solutions for footings on two-layered clays. Geomechanics and Geoengineering: An International Journal, 1 (2). pp. 151-162. ISSN 1748-6025

Pham, Maria M. and Mills, Julie E. and Zhuge, Yan (2006) Experimental capacity assessment of cold-formed boxed stud and C stud wall systems used in Australian residential construction. Journal of Structural Engineering, 132 (4). pp. 631-635. ISSN 0733-9445

Karunasena, W. (Karu) and Williams, K. (2006) Behaviour of FRP-to-concrete bonded joints. In: ACUN-5 International Composites Conference, 11-14 July 2006, Sydney, NSW, Australia.

Karunasena, W. (2006) Elastodynamic reciprocity relations for wave scattering by flaws in fiber-reinforced composite plates. In: 10th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-10), 3-5 August 2006, Bangkok, Thailand.

Omar, Tarek and Heldt, Tim and Key, P. and Van Erp, Gerard (2006) M2S2 modular deployable composite shelters: concept and loading criteria. Australian Journal of Structural Engineering, 6 (3). pp. 217-226. ISSN 1328-7982

Liu, Hong-Yuan and Yan, Wenyi and Mai, Yiu-Wing (2006) Z-pin bridging in composite laminates and some related problems. Australian Journal of Mechanical Engineering, 3 (1). pp. 11-19.

Lokuge, Weena P. and Sanjayan, J. G. and Setunge, Sujeeva (2005) Stress-strain model for laterally confined concrete. Journal of Materials in Civil Engineering, 17 (6). pp. 607-616. ISSN 0899-1561

Lee, Chang Long (2005) A study and evaluation on Seri Wawasan bridge in Putrajaya, Malaysia. [USQ Project] (Unpublished)

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2005) Overview of external post-tensioning in bridges. In: 2005 Southern Region Engineering Conference: Managing Resources for a Sustainable Future (SREC 2005), 15 Oct 2005, Toowoomba, Australia.

Kannapiran, Ram Kumar M. (2005) A study and evaluation on SMART Project, Malaysia. [USQ Project] (Unpublished)

Leow, Jia Hui (2005) A study of building foundations in Malaysia. [USQ Project] (Unpublished)

Gounder, Sangeevam (2005) Design of steel structures under fire. [USQ Project] (Unpublished)

Whittaker, Todd (2005) Effect of existing cracks in shear strengthening of concrete girders with external post-tensioning. [USQ Project] (Unpublished)

Chuah, Yew Pin (2005) Evolutionary structural optimization for multi component structural systems. [USQ Project] (Unpublished)

Davis, Shawn Wayne (2005) Investigation of the flexural strengthening of concrete beams using external prestressing. [USQ Project] (Unpublished)

Omar, T. and Heldt, T. and Key, P. and Van Erp, G. (2005) Development of modular deployable composite shelters. In: ASEC 2005: 5th Australian Structural Engineering Conference , 11-14 Sep 2005, Newcastle, Australia.

Liang, Qing Quan and Uy, Brian and Liew, J. Y. Richard (2005) Strength of concrete-filled steel box columns with local buckling effects. In: 2005 Australian Structural Engineering Conference (ASEC 2005), 11-14 September, 2005, Newcastle, Australia.

Aravinthan, Thiru and Heldt, Tim (2005) Strengthening of bridge headstocks with external post-tensioning: design issues and strengthening techniques. In: Road System and Engineering Technology Forum, 9-11 August 2005, Brisbane, Australia.

Davey, Scott W. and Heldt, Tim and Van Erp, Gerard and Ayers, Stephen R. (2005) Vinylester/cenosphere composite materials for civil and structural engineering. FRP International : The Official Newsletter of the International Institute for FRP in Construction, 2 (3). pp. 2-5.

Liu, Weili and Zhang, H. F. and Hu, Z. Q. and Wang, Hao (2005) Formation and mechanical properties of Mg65Cu25Er10 and Mg65Cu15Ag10Er10 bulk amorphous alloys. Journal of Alloys and Compounds, 397 (1-2). pp. 202-206. ISSN 0925-8388

Aravinthan, Thiru and Witchukreangkrai, Eakarat and Mutsuyoshi, Hiroshi (2005) Flexural behavior of two-span continuous prestressed concrete girders with highly eccentric external tendors. ACI Structural Journal, 102 (3). pp. 402-411. ISSN 0889-3241

Aravinthan, T. and Heldt, T. (2005) Innovative strengthening technique using prestressed fibre wraps for bridge headstocks. In: ASEC 2005: 6th Australian Structural Engineering Conference Structural engineering : preserving and building into the future , 11-14 Sep 2005, Newcastle, Australia.

Yao, Xiangdong and Wang, Hao and He, B. and Zhou, X. (2005) Modeling of columnar-to-equiaxed transition in solidified Al-Si alloys. In: 5th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 5), 2-5 Nov 2004, Beijing, China.

Springolo, Mario (2005) New fibre-reinforced polymer box beam: investigation of static behaviour. [Thesis (PhD/Research)] (Unpublished)

Chen, G. and Baker, Graham (2005) One-dimensional nonlinear model for prediction of crack spacing in concrete pavements. Advances in Structural Engineering, 8 (6). pp. 595-602. ISSN 1369-4332

Liang, Qing Quan (2005) Performance-based optimization of structures: theory and applications. Spon Research . Taylor & Francis (Spon Press), London and New York. ISBN 0-415-33594-9

Zhuge, Y. and Chuang, S. W. (2005) Seismic retrofitting of unreinforced masonry buildings - a literature review. Australian Journal of Structural Engineering, 6 (1). pp. 25-36. ISSN 1328-7982

Liang, Qing Quan and Uy, Brian and Bradford, Mark A. and Ronagh, Hamid R. (2005) Strength analysis of steel-concrete composite beams in combined bending and shear. Journal of Structural Engineering, 131 (10). pp. 1593-1600. ISSN 0733-9445

Karunasena, W. and Anderson, W. C. (2005) Strength and ductility prediction of concrete beams reinforced with internal steel and external composite materials. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005), 16-18 February 2005, Melbourne, Australia.

Ngo, Nelson, Shing Chai (2004) High-strength structural concrete with recycled aggregates. [USQ Project] (Unpublished)

Wong, Chuan Mein (2004) Use of short fibres in structural concrete to enhance mechanical properties. [USQ Project] (Unpublished)

Lau, Chau Chin (2004) A study on concrete faced rockfill dams. [USQ Project] (Unpublished)

Heng, Hern (2004) Design of structural glass fitting for seismic condition. [USQ Project] (Unpublished)

Cheong, Fong Chin (2004) Effect of admixtures on the use of short fibres in structural concrete to enhance mechanical properties. [USQ Project] (Unpublished)

Choo, Yeun Feong (2004) Seismic stability of slope. [USQ Project] (Unpublished)

Jobling, Lindsay Peter (2004) Shear strengthening of headstocks using prestressed fibre strips. [USQ Project] (Unpublished)

Krinke, Mark James (2004) The effect of admixtures in concrete containing manufactured sand. [USQ Project] (Unpublished)

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2004) Constitutive model for confined high strength concretes subjected to cyclic loading. Journal of materials in Civil Engineering, 16 (4). pp. 297-305. ISSN 0899-1561

Chen, G. and Baker, Graham (2004) Enhanced approach to consistency in gradient-dependent plasticity. Advances in Structural Engineering, 7 (3). pp. 279-283. ISSN 1369-4332

Chen, G. and Baker, Graham (2004) Incompatible 4-node element for gradient-dependent plasticity. Advances in Structural Engineering, 7 (2). pp. 169-177. ISSN 1369-4332

Zhuge, Yan and Jin, Feng and Hunt, Suzanne P. (2004) The prediction of damage to masonry houses caused by foundation movements. Advances in Structural Engineering, 7 (1). pp. 81-93. ISSN 1369-4332

Ayers, Stephen R. and van Erp, Gerard (2004) A Code of Practice for the structural design of fibre composites. Proceedings of the Institution of Civil Engineers, Structures & Buildings, 157 (1). pp. 3-8. ISSN 1751-7702

Chen, G. and Baker, Graham (2004) Incompatible 3-node interpolation for gradient-dependent plasticity. Structural Engineering and Mechanics , 17 (1). pp. 87-97. ISSN 1225-4568

Epaarachchi, Jayantha A. and Clausen, Philip D. (2004) Accelerated full scale fatigue testing of a small composite wind turbine blade using a mechanically operated test rig. In: 2004 Structural Integrity and Fracture International Conference (SIF2004), 26-29 Sept 2004, Brisbane, Australia.

Hughes, Warren and Karunasena, Warna (2004) Factors affecting debonding of FRP (fiber-reinforced polymer) rehabilitated concrete beams. In: 3rd International Conference on Advances in Structural Engineering and Mechanics (ASEM 2004), 2-4 Sept 2004, Seoul, South Korea.

Liang, Qing Quan and Uy, Brian and Wright, Howard D. and Bradford, Mark A. (2004) Local buckling of steel plates in double skin composite panels under biaxial compression and shear. Journal of Structural Engineering, 130 (3). pp. 443-451. ISSN 0733-9445

Huang, Da (2004) Structural behaviour of two-way fibre reinforced composite slabs. [Thesis (PhD/Research)] (Unpublished)

Liang, Qing Quan and Uy, Brian and Bradford, Mark A. and Ronagh, Hamid R. (2004) Ultimate strength of continuous composite beams in combined bending and shear. Journal of Constructional Steel Research, 60 (8). pp. 1109-1128. ISSN 0143-974X

Chen, G. and Baker, Graham (2003) A Rayleigh-Ritz procedure for localized buckling of a strut on a softening foundation by Hermite functions. International Journal of Solids and Structures, 40 (26). pp. 7463-7474. ISSN 0020-7683

Johnson, K. and Lemcke, Pamela M. and Karunasena, W. and Sivakugan, Nagaratnam (2003) Modelling the response to deep foundations under oblique loading. In: MODSIM03: International Congress on Modelling and Simulation: Integrative Modelling of Biophysical, Social, and Economic Systems for Resource Management Solutions, 14-17 July 2003, Townsville, Australia.

Chen, G. and Baker, Graham (2003) Influence of bond slip on crack spacing in numerical modeling of reinforced concrete. Journal of Structural Engineering, 129 (11). pp. 1514-1521. ISSN 0733-9445

Merifield, Richard S. and Sloan, Scott W. and Lyamin, Andrei V. (2003) The stability of inclined plate anchors in purely cohesive soil. Technical Report. University of Southern Queensland, Toowoomba, Australia.

Merifield, Richard S. and Sloan, Scott W. and Lyamin, Andrei V. (2003) Three dimensional lower bound solutions for the stability of plate anchors in sand. Technical Report. University of Southern Queensland, Toowoomba, Australia.

Chen, G. and Baker, Graham (2003) Characteristics of solutions in softening plasticity and path criterion. Structural Engineering and Mechanics, 16 (2). pp. 141-152. ISSN 1225-4568

Lokuge, Weena and Setunge, Sujeeva and Sanjayan, J. G. (2003) Modelling eccentrically loaded high-strength concrete columns. Magazine of Concrete Research, 55 (4). pp. 331-341. ISSN 0024-9831

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2003) Triaxial test results of high-strength concrete subjected to cyclic loading. Magazine of Concrete Research, 55 (4). pp. 321-329. ISSN 0024-9831

Islam, Md Mainul and Watanabe, Taiji (2003) Crack opening behavior in aluminum alloy 5083. Journal of Mechanical Engineering, Institution of Engineers, Bangladesh, ME 32. pp. 26-35. ISSN 0379-4318

Liang, Qing Quan and Uy, Brian and Wright, Howard D. and Bradford, Mark A. (2003) Local and post-local buckling of steel-concrete composite panels under combined states of stresses. In: Proceedings of the International Conference on Advances in Structures (ASSCCA'03), 22-25 June 2003, Sydney, Australia.

Chen, Guangnan and Baker, Graham (2003) An energy model for bifurcation analysis of a double-notched concrete panel: continuum model. Advances in Structural Engineering, 6 (1). pp. 45-51. ISSN 1369-4332

Lam, Y. C. and Santhikumar, S. (2003) Automated rib location and optimization for plate structures. Structural and Multidiscipline Optimization, 25 (1). pp. 35-45. ISSN 1615-1488

Liang, Qing Quan and Uy, Brian and Wright, Howard D. and Bradford, Mark A. (2003) Local and post-local buckling of double skin composite panels. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 156 (2). pp. 111-119. ISSN 0965-0911

Chen, G. and Baker, Graham (2003) Material softening and structural instability. Advances in Structural Engineering, 6 (4). pp. 353-357. ISSN 1369-4332

Liang, Qing Quan and Uy, Brian and Wright, Howard D. and Bradford, Mark A. (2002) Local buckling of biaxially compressed steel plates in double skin composite panels. In: Proceedings of the Third International Conference on Advances in Steel Structures, 9-11 Dec 2002, Hong Kong, China.

Liang, Qing Quan and Steven, Grant P. (2002) A performance-based optimization method for topology design of continuum structures with mean compliance constraints. Computer Methods in Applied Mechanics and Engineering, 191 (13-14). pp. 1471-1489. ISSN 0045-7825

Liang, Qing Quan and Uy, Brian and Steven, Grant P. (2002) Performance-based optimization for strut-tie modeling of structural concrete. Journal of Structural Engineering, 128 (6). pp. 815-823. ISSN 0733-9445

Liang, Qing Quan and Xie, Yi Min and Steven, Grant P. (2001) Generating optimal strut-and-tie models in prestressed concrete beams by performance-based optimization. ACI Structural Journal, 98 (2). pp. 226-232. ISSN 0889-3241

Liang, Qing Quan and Xie, Yi Min and Steven, Grant P. (2001) A performance index for topology and shape optimization of plate bending problems with displacement constraints. Structural and Multidisciplinary Optimization, 21 (5). pp. 393-399. ISSN 1615-147X

Liang, Qing Quan and Xie, Yi Min and Steven, Grant P. (2000) Optimal topology selection of continuum structures with displacement constraints. Computers and Structures, 77 (6). pp. 635-644. ISSN 0045-7949

Liang, Qing Quan and Xie, Yi Min and Steven, Grant P. (2000) Topology optimization of strut-and-tie models in reinforced concrete structures using an evolutionary procedure. ACI Structural Journal, 97 (2). pp. 322-330. ISSN 0889-3241

Liang, Qing Quan and Xie, Yi Min and Steven, Grant P. (2000) Optimal topology design of bracing systems for multi-story steel frames. Journal of Structural Engineering, 126 (7). pp. 823-829. ISSN 0733-9445

Liang, Qing Quan and Uy, Brian (2000) Theoretical study on the post-local buckling of steel plates in concrete-filled box columns. Computers and Structures, 75 (5). pp. 479-490. ISSN 0045-7949

Liang, Qing Quan and Xie, Yi Min and Steven, Grant P. (1999) Optimal selection of topologies for the minimum-weight design of continuum structures with stress constraints. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 213 (8). pp. 755-762. ISSN 0954-4062

Liang, Q. Q. and Xie, Y. M. and Steven, G. P. (1999) Optimal strut-and-tie models in structural concrete members. In: 7th International Conference on Civil and Structural Engineering: Optimization and Control in Civil and Structural Engineering, 13-15 Sep 1999, Oxford, United Kingdom.

Liang, Qing Quan and Xie, Yi Min and Steven, Grant P. (1999) Optimal topology selection of continuum structures with stress and displacement constraints. In: 7th East Asia-Pacific Conference on Structural Engineering & Construction, 27-29 August, 1999, Kochi, Japan.

Liang, Qing Quan and Xie, Yi Min and Steven, Grant P. and Schmidt, L. C. (1999) Topology optimization of strut-and-tie models in non-flexural reinforced concrete members. In: International Conference on Mechanics of Structures, Materials and Systems, 17-19 February, 1999, Wollongong, Australia.

Liang, Qing Quan and Uy, Brian (1998) Geometric and material nonlinear behaviour of steel plates in thin-walled concrete filled box columns. In: 2nd International Conference on Thin-Walled Structures, 2-4 December, 1998, Singapore.

Liang, Qing Quan and Uy, Brian (1998) Parametric study on the structural behaviour of steel plates in concrete-filled fabricated thin-walled box columns. Advances in Structural Engineering, 2 (1). pp. 57-71. ISSN 1369-4332

This list was generated on Wed Jul 23 01:25:21 2014 EST.