|Up a level|
Zhu, Huajun and Zhang, Zuhua and Deng, Fenggan and Cao, Yalong (2013) The effects of phase changes on the bonding property of geopolymer to hydrated cement. Construction and Building Materials, 48. pp. 124-130. ISSN 0950-0618
Serra, Michael Peter (2013) Geotechnical stability analysis using student versions of FLAC, PLAXIS and SLOPE/W. [USQ Project] (Unpublished)
Sams, Mathew Steven (2013) Numerical and physical modelling of a 2D tunnel heading at collapse. [USQ Project] (Unpublished)
Blyth, James Ian (2013) Optimising earth dam design in seasonal freeze-thaw climates. [USQ Project] (Unpublished)
Spurling, Harrison (2013) Water sensitive urban design for sustainable road development. [USQ Project] (Unpublished)
Guades, Ernesto and Aravinthan, Thiru and Manalo, Allan and Islam, Mainul (2013) Experimental investigation on the behaviour of square FRP composite tubes under repeated axial impact. Composite Structures, 97. pp. 211-221. ISSN 0263-8223
Ghabraie, Behrooz and Ren, Gang and Ghabraie, Kazem and Xie, Yi Min (2013) A study on truss bolt mechanism in controlling stability of underground excavation and cutter roof failure. Geotechnical and Geological Engineering, 31 (2). pp. 667-682. ISSN 0960-3182
Ghabraie, Behrooz and Ren, Gang and Ghabraie, Kazem (2013) Effects of thickness of roof layers on optimum design of truss bolt system using finite element modeling techniques. Electronic Journal of Geotechnical Engineering, 13 (A). pp. 147-158. ISSN 10893032
Shiau, Jim and Smith, Catherine (2013) Developing numerical models for the design of cantilever sheet pile wall. In: 1st Australasia and South-East Asia Structural Engineering and Construction Conference (ASEA-SEC-1), 28 Nov-2 Dec 2012, Perth, Australia.
Shiau, Jim (2013) Shakedown analysis of layered continuum. In: 1st Australasia and South East Asia Conference in Structural Engineering and Construction (ASEA-SEC-1), 28 Nov-2 Dec 2012, Perth, Australia.
Nguyen, T. and Ghabraie, K. and Tran-Cong, T. (2012) Tunnel reinforcement optimisation for nonlinear material. In: 4th International Conference on Computational Methods (ICCM 2012), 25-28 Nov 2012, Gold Coast, Australia.
Ghabraie, B. and Ren, G. and Xie, Y. M. and Ghabraie, K. (2012) Study of truss bolt system for highly stressed rock mass using finite element modelling techniques. In: 11th Australia New Zealand Conference on Geomechanics: Ground Engineering in a Changing World, 15-18 July 2012, Melbourne, Australia.
Guades, Ernesto and Aravinthan, Thiru and Islam, Mainul and Manalo, Allan (2012) A review on the driving performance of FRP composite piles. Composite Structures, 94 (6). pp. 1932-1942. ISSN 0263-8223
Guades, Ernesto J. and Aravinthan, Thiru and Islam, Md. Mainul and Manalo, Allan C. (2012) Stiffness of FRP pultruded tubes under repeated axial impacts. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.
Shiau, Jim and Al Abri, Mohammed (2011) A study on the failure mechanisms of horizontal plate anchors in clay. In: ICAGE 2011: International Conference on Advances in Geotechnical Engineering, 7-9 Nov 2011, Perth, Western Australia.
Peters, Renee (2011) Advanced analysis of shallow foundations located near slopes. [USQ Project] (Unpublished)
Shiau, J. S. and Merifield, R. S. and Lyamin, A. V. and Sloan, S. W. (2011) Undrained stability of footings on slopes. International Journal of Geomechanics, 11 (5). pp. 381-390. ISSN 1532-3641
Veenstra, Nathaniel (2011) Optimum strut-and-tie model for a cantilever curved wall. [USQ Project] (Unpublished)
Rashidi, Majid and Khabbaz, Borzoo Ghareei (2011) Finite element modeling of soil sinkage by multiple loadings. In: CIGR 2011 International Symposium on Sustainable Bioproduction - Water, Energy, and Food (WEF 2011), 19-23 Sep 2011, Tokyo, Japan.
Shiau, Jim S. (2011) A shakedown limit under Hertz contact pressure. Advanced Materials Research, v. 291-294, 291-29. pp. 1506-1510. ISSN 1662-8985
Guades, E. J. and Aravinthan, T. and Islam, M. M. (2011) Driveability of composite piles. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011) , 27-29 Apr 2011, Brisbane, Australia.
Shiau, J. S. and Smith, C. A. (2011) Calculation of lateral earth pressures with layered backfill. In: Continuum and Distinct Element Numerical Modeling in Geomechanics, 14-16 Feb 2011, Melbourne, Australia.
Shiau, J. S. and Hobson, M. A. (2011) Modeling uplift of plate anchor. In: Continuum and Distinct Element Numerical Modeling in Geomechanics, 14-16 Feb 2011, Melbourne, Australia.
Shiau, Jim S. and Hobson, Michael A. (2011) Teaching earth pressure theory using physical models: an example in civil engineering. In: International Engineering and Technology Education Conference 2011 (IETEC 2011) , 16-19 Jan 2011, Kuala Lumpur, Malaysia.
Caunce, Catherine May (2010) Effective road pavement design for expansive soils in Ipswich. [USQ Project] (Unpublished)
Zanetti, Ashley (2010) Investigation of pavement design for low volume rural roads. [USQ Project] (Unpublished)
Seccombe, Andrew James (2010) The use of Fibre Bragg Grating (FBG) sensors in geotechnical applications. [USQ Project] (Unpublished)
Ghabraie, Kazem and Xie, Yi Min and Huang, Xiaodong and Ren, Gang (2010) Shape and reinforcement optimization of underground tunnels. Journal of Computational Science and Technology, 4 (1). pp. 51-63.
Cole, Andrew James Shorten (2009) A comprehensive study of footing on c-φ soil slopes - numerical and physical modelling. [USQ Project] (Unpublished)
Lyle, Nathan Ross (2009) Comprehensive design charts for the footing on slope problem. [USQ Project] (Unpublished)
Crone, Jeffrey John (2009) Alternate pavement types on reactive soils in the Ipswich Council area. [USQ Project] (Unpublished)
Burton, Bruce (2009) Griffin Road drainage diversion – feasibility study. [USQ Project] (Unpublished)
Yu, Yu Wah (2009) Pile driving analysis via dynamic loading test. [USQ Project] (Unpublished)
Genet, Martin and Yan, Wenyi and Tran-Cong, Thanh (2009) Investigation of a hydraulic impact: a technology in rock breaking. Archive of Applied Mechanics, 79 (9). pp. 825-841. ISSN 0939-1533
Golshani, Aliakbar and Tran-Cong, Thanh (2009) Energy analysis of hydraulic fracturing. KSCE Journal of Civil Engineering, 13 (4). pp. 219-224. ISSN 1226-7988
Houghton, Richard (2009) Impact of tailings subsidence on rehabilitated landform erosional stability. [USQ Project] (Unpublished)
Shiau, J. S. and Watson, J. F. (2008) 3D bearing capacity of shallow foundations located near deep excavation sites. In: 2008 International Conference on Deep Excavation: Challenges Risk Management of Underground Construction (ICDE 2008), 10-12 Nov 2008, Singapore.
Watson, Joshua Francis (2008) Investigation of the bearing capacity of shallow footings located near slopes. [USQ Project] (Unpublished)
Whiteford, Mark (2008) Relationship contracting in the mineral processing industry. [USQ Project] (Unpublished)
Shiau, Jim S. and Thomas, Caroline J. and Smith, Catherine A. (2008) A FLAC model for classical earth pressure problems. In: 1st International FLAC/DEM Symposium on Numerical Modeling, 25-27 Aug 2008, Minneapolis, United States.
Shiau, Jim S. and Watson, Joshua F. and Smith, C. A. (2008) Foundation located near slope: a FLAC study. In: 1st International FLAC/DEM Symposium on Numerical Modeling, 25-27 Aug 2008, Minneapolis, USA.
Shiau, Jim S. and Watson, Joshua Francis and Arnold, Matthew David (2008) Numerical study of a shallow foundation located near 45 degree slopes. In: ASEM 2008: 4th International Conference on Advances in Structural Engineering and Mechanics , 26-28 May 2008, Jeju, Korea.
Schuh, Stephen Andrew (2007) Estimating rippability of Brisbane Tuff using quantitative and qualitative characteristics and a modified approach to an existing rippability rating method. [USQ Project] (Unpublished)
Smith, Catherine and Shiau, Jim S. (2007) Bearing capacity of footings near slopes. In: 10th Australia New Zealand Conference on Geomechanics, 21-24 Oct 2007, Brisbane, Australia.
Thomas, Caroline and Shiau, Jim S. (2007) Modelling the arching effect in active earth pressure problems. In: 10th Australia New Zealand Conference on Geomechanics, 21-24 Oct 2007, Brisbane, Australia.
Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2007) An investigation of the response of embedded near infrared fibre bragg grating (FBG) sensors (830nm) in glass fibre composites under fatigue loading. In: 14th International Conference on Composite Structures (ICCS 14), 19-21 Nov 2007, Melbourne, Australia.
Jiankulprasert, Manop (2006) Developing physical model for bearing capacity and flow net applications. [USQ Project] (Unpublished)
Ng, S. K. and Carter, S. J. B. and Bullen, Frank (2006) A biomimicry approach to automating visual road surveys. In: 22nd ARRB Conference: Research Into Practice, 29 Oct - 02 Nov 2006, Canberra, Australia.
Shiau, Jim S. and Perumal, Tagarajan and Benjamin, Michael and Pather, Selvan and Ayers, Ron (2006) Developing a track model for testing the road pavement under repeated moving surface loads. In: 22nd ARRB Conference: Research Into Practice, 29 Oct - 02 Nov 2006, Canberra, Australia.
Shiau, Jim S. and Lyamin, Andrei V. and Sloan, Scott W. (2006) Application of pseudo-static limit analysis in geotechnical earthquake design. In: 6th European Conference on Numerical Methods in Geotechnical Engineering, 6-8 Sep 2006, Graz, Austria.
Shiau, Jim S. and Pather, Selvan and Ayers, Ron (2006) Developing physical models for geotechnical teaching and research. In: 6th International Conference on Physical Modelling in Geotechnics, 4-6 Aug 2006, Hong Kong.
Shiau, Jim and Smith, Catherine (2006) Numerical analysis of passive earth pressures with interfaces. In: III European Conference on Computational Mechanics (ECCM 2006), 5-8 June 2006, Lisbon, Portugal.
Shiau, Jim S. (2006) Numerical investigation of shakedown residual stresses under moving surface loads. In: III European Conference on Computational Mechanics (ECCM 2006), 5-8 June 2006, Lisbon, Portugal.
Garrard, Brian John (2005) Comparison of moisture density relationship tests in civil engineering materials. [USQ Project] (Unpublished)
Choi, Richard Fun Yiu (2005) Review of the jet grouting method. [USQ Project] (Unpublished)
Zhuge, Yan and Jin, Feng and Hunt, Suzanne P. (2004) The prediction of damage to masonry houses caused by foundation movements. Advances in Structural Engineering, 7 (1). pp. 81-93. ISSN 1369-4332