|Up a level|
Deo, Ravinesh C. and Şahin, Mehmet (2016) An extreme learning machine model for the simulation of monthly mean streamflow water level in eastern Queensland. Environmental Monitoring and Assessment. ISSN 0167-6369 (In Press)
Nikitenkova, S. and Singh, N. and Stepanyants, Y. (2015) Modulational stability of weakly nonlinear wave-trains in media with small- and large-scale dispersions. Chaos, 25. pp. 123113-1. ISSN 1054-1500
Ostrovsky, L. and Pelinovsky, E. and Shrira, V. and Stepanyants, Y. (2015) Beyond the KdV: post-explosion development. Chaos, 25 (9). pp. 1-13. ISSN 1054-1500
Hassan, H. K. and Stepanyants, Y. A. (2015) Dynamics of two charged particles in a creeping flow. Journal of Physical Mathematics, 6 (2). ISSN 2090-0899
Kurkina, O. and Singh, N. and Stepanyants, Y. (2015) Structure of internal solitary waves in two-layer fluid at near-critical situation. Communications in Nonlinear Science and Numerical Simulation, 22 (1-3). pp. 1235-1242. ISSN 1007-5704
Churaev, Egor N. and Semin, Sergey V. and Stepanyants, Yuri A. (2015) Transformation of internal waves passing over a bottom step. Journal of Fluid Mechanics, 768. R3-1. ISSN 0022-1120
Nikitenkova, S. P. and Raj, N. and Stepanyants, Y. A. (2015) Nonlinear vector waves of a flexural mode in a chain model of atomic particles. Communications in Nonlinear Science and Numerical Simulation, 20 (3). pp. 731-742. ISSN 1007-5704
Kurkina, O. and Singh, N. and Stepanyants, Y. (2014) Internal solitary waves in two-layer fluids at near-critical situation. In: 19th Australasian Fluid Mechanics Conference, 8–11 Dec 2014, Melbourne, Australia.
Churaev, E. N. and Semin, S. V. and Stepanyants, Y. A. (2014) Transformation of internal waves at the bottom ledge. In: 19th Australasian Fluid Mechanics Conference, 8–11 Dec 2014, Melbourne, Australia.
Mohammed, F. J. and Ngo-Cong, D. and Strunin, D. V. and Mai-Duy, N. and Tran-Cong, T. (2014) Modelling dispersion in laminar and turbulent flows in an open channel based on centre manifolds using 1D-IRBFN method. Applied Mathematical Modelling, 38 (14). pp. 3672-3691. ISSN 0307-904X
Tien, C. M. T. and Thai-Quang, N. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2014) A fully coupled scheme for viscous flows in regular and irregular domains using compact integrated RBF approximation. Applied Mechanics and Materials, 553. pp. 138-143. ISSN 1662-7482
Phan-Thien, N. and Mai-Duy, N. and Khoo, B. C. (2014) A spring model for suspended particles in dissipative particle dynamics. Journal of Rheology, 58 (4). pp. 839-867. ISSN 0148-6055
Phan-Thien, N. and Mai-Duy, N. and Pan, D. and Khoo, B.C. (2014) Exponential-time differencing schemes for low-mass DPD systems. Computer Physics Communications, 185 (1). pp. 229-235. ISSN 0010-4655
Averbukh, E. L. and Kurkin, A. A. and Stepanyants, Y. A. and Talipova, T. G. (2014) Dispersion properties of waves on a surface of viscous fluid covered by an elastic film. Fluid Dynamics, 49 (6). pp. 796-803. ISSN 0015-4628
Giniyatullin, A. R. and Kurkin, A. A. and Kurkina, O. E. and Stepanyants, Y. A. (2014) Generalized Korteweg–de Vries equation for internal waves in two-layer fluid. Fundamental and Applied Hydrophysics, 7 (4). pp. 16-28.
Mohammed, Fadhel Jasim (2014) Modelling dispersion in turbulent boundary layers using centre manifold technique. [Thesis (PhD/Research)] (Unpublished)
Obregon, Maria and Stepanyants, Yury (2014) On stationary solutions of the reduced Gardner–Ostrovsky equation. Discontinuity, Nonlinearity and Complexity, 3 (4). pp. 445-456. ISSN 2164-6376
Strunin, Dmitry and Melnik, Roderick (2014) Soliton-like thermoelastic waves. In: Encyclopedia of thermal stresses. Springer, Dordrecht, Netherlands, pp. 4433-4438. ISBN 978-94-007-2738-0
Deo, Ravinesh C. (2013) Comparative analysis of turbulent plane jets from a sharp-edged orifice, a beveled-edge orifice and a radially contoured nozzle. International Journal of Mechanical, Industrial Science and Engineering, 7 (12). pp. 1471-1480.
Deo, Ravinesh C. (2013) The role of nozzle-exit conditions on the flow field of a plane jet. International Journal of Mechanical, Industrial Science and Engineering, 7 (12). pp. 1059-1069.
Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak (2013) Cure shrinkage in epoxy grouts for grouted repairs. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.
Deo, Ravinesh C. and Nathan, Graham J. and Mi, Jianchun (2013) Similarity analysis of the momentum field of a subsonic, plane air jet with varying jet-exit and local Reynolds numbers. Physics of Fluids, 25 (1). 015115-1. ISSN 1070-6631
Obregon, M. and Raj, N. and Stepanyants, Y. (2012) Numerical study of nonlinear wave processes by means of discrete chain models. In: 4th International Conference on Computational Methods (ICCM 2012), 25-28 Nov 2012, Gold Coast, Australia.
Supeni, Eris Elianddy (2012) Design and analysis of a smart composite beam for small wind turbine blade construction. In: Southern Regional Engineering Conference (SREC 2012) , 1 Sep 2012, Toowoomba, Australia.
Nikolaevskiy, Victor and Strunin, Dmitry (2012) The role of natural gases in seismics of hydrocarbon reservoirs. In: III-rd International Conference Elastic Wave Effect on Fluid in Porous Media (EWEF 2012), 24-28 Sept 2012, Moscow, Russia.
Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2012) Design of smart structures for wind turbine blades. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.
Dehkhoda, Sevda and Hood, Michael and Alehossein, Habib and Buttsworth, David (2012) Analytical and experimental study of pressure dynamics in a pulsed water jet device. Flow, Turbulence and Combustion, 89 (1). pp. 97-119. ISSN 1386-6184
Strunin, D. V. and Mohammed, F. J. (2012) Numerical analysis of an averaged model of turbulent transport near a roughness layer. Australian and New Zealand Industrial and Applied Mathematics (ANZIAM) Journal, 53 (S). C142-C154. ISSN 1446-8735
Abeysekera, Vasantha (2012) Mortar consumption characteristics of 'brickwork' and a framework for managing brick and mortar walls in chaotic environments. Engineer, 45 (2). pp. 49-64. ISSN 1800-1122
Strunin, Dmitry V. (2011) A model of turbulent dispersion through roughness layer using centre manifolds. In: 6th AIAA Theoretical Fluid Mechanics Conference, 27-30 Jun 2011, Honolulu, HI. United States.
Liu, Liwi and Liu, Yanju and Leng, Jinsong and Lau, Kin-tak (2011) Electromechanical stability of compressible dielectric elastomer actuators. Smart Materials and Structures, 20 (11). p. 115015. ISSN 0964-1726
Lian, C. and Zhuge, Y. and Beecham, S. (2011) The relationship between porosity and strength for porous concrete. Construction and Building Materials, 25 (11). pp. 4294-4298. ISSN 0950-0618
Shiau, Jim S. (2011) A shakedown limit under Hertz contact pressure. Advanced Materials Research, v. 291-294, 291-29. pp. 1506-1510. ISSN 1662-8985
Strunin, D. V. (2011) Universality of turbulent dispersion in a steady flow in an open channel. Quarterly Journal of Mechanics and Applied Mathematics, 64 (2). pp. 197-214. ISSN 0033-5614
Stepanyants, Yu. A. and Yakubovich, Evsey (2011) Scalar description of three-dimensional vortex flows of incompressible fluid. Doklady Physics, 56 (2). pp. 130-133. ISSN 1028-3358
Malpress, Ray and Buttsworth, David (2010) Assessment of an eccentric link in the connecting rod of a spark ignition engine intended for variable compression ratio operation. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Western Australia.
Deo, Ravinesh C. and Nathan, Graham Jerold and Mi, Jianchun (2010) On the influence of initial conditions on a turbulent plane jet: the role of nozzle exit area. In: 17th Australasian Fluid Mechanics Conference (AFMC 2010), 5-9 Dec 2010, Auckland, New Zealand.
Ning, Z. L. and Wang, H. and Sun, J. F. (2010) Deformation behavior of semisolid A356 alloy prepared by low temperature pouring. Materials and Manufacturing Processes, 25 (7). pp. 648-653. ISSN 1042-6914
Phillips, D. G. and Tran, Canh-Dung and Fraser, W. B. and van der Heijden, G. H. M. (2010) Torsional properties of staple fibre plied yarns. Journal of the Textile Institute, 101 (7). pp. 595-612. ISSN 0040-5000
Strunin, Dmitry V. (2010) An averaged model of dispersion of pollutant in a channel: logarithmic flow. In: 29th IASTED International Conference on Modelling, Identification and Control (MIC 2010), 15-17 Feb 2010, Innsbruck, Austria.
Ku, H. S. and Fok, S. C. and Siores, E. (2009) Contrasts on fracture toughness and flexural strength of varying percentages of SLG-reinforced phenolic composites. Journal of Composite Materials, 43 (8). pp. 885-895. ISSN 0021-9983
Yusaf, Talal F. (2009) Diesel engine optimization for electric hybrid vehicles. Journal of Energy Resources Technology, 131 (1). 12203-1-12203-4. ISSN 0195-0738
Strunin, Dmitry V. and Roberts, Anthony J. (2009) Low-dimensional boundary-layer model of turbulent dispersion in a channel. In: WCE 2009: World Congress of Engineering , 1-3 Jul 2009, London, United Kingdom.
Mai-Duy, Nam and Tran-Cong, Thanh (2008) A second-order continuity domain-decomposition technique based on integrated Chebyshev polynomials for two-dimensional elliptic problems. Applied Mathematical Modelling, 32 (12). pp. 2851-2862. ISSN 0307-904X
Strunin, D. V. (2008) Two-dimensional particle solution of the extended Hamilton-Jacobi equation. Australian and New Zealand Industrial and Applied Mathematics (ANZIAM) Journal, 50 (S). C282-C291. ISSN 1446-1811
Bordas, Stephane and Duflot, Marc and Le, Phong (2008) A simple error estimator for extended finite elements. Communications in Numerical Methods in Engineering, 24 (11). pp. 961-971. ISSN 1069-8299
Golshani, Aliakbar and Tran-Cong, Thanh and Buttsworth, David (2008) Impact on a water filled cylinder. In: ACMFMS 2008: Asian Conference on Mechanics of Functional Materials and Structures, 31 Oct-3 Nov 2008, Matsue, Japan.
Islam, Md Mainul and Kim, Ho Sung (2008) Manufacture of syntactic foams using starch as binder: post-mold processing. Materials and Manufacturing Processes, 23 (8). pp. 884-892. ISSN 1042-6914
Suslov, Sergey A. and Tran, Thien Duc (2008) Revisiting plane Couette-Poiseuille flows of a piezo-viscous fluid. Journal of Non-Newtonian Fluid Mechanics, 154 (2-3). pp. 170-178. ISSN 0377-0257
Caputo, Jean-Guy and Stepanyants, Yury (2008) Front solutions of Richards' equation. Transport in Porous Media, 74 (1). pp. 1-20. ISSN 0169-3913
Tran, Canh-Dung and van der Heijden, G. H. M. and Phillips, David G. (2008) Application of topological conservation to model key features of zero-torque multi-ply yarns. Journal of the Textile Institute, 99 (4). pp. 325-337. ISSN 0040-5000
Le, P. and Mai-Duy, N. and Tran-Cong, T. and Baker, G. (2008) An IRBFN cartesian grid method based on displacement-stress formulation for 2D elasticity problems. In: 8th World Congress on Computational Mechanics (WCCM8), 30 Jun-4 Jul 2008, Venice, Italy.
Mai-Cao, L. and Tran-Cong, T. (2008) A meshless approach to capturing moving interfaces in passive transport problems. CMES: Computer Modeling in Engineering and Sciences, 31 (3). pp. 157-188. ISSN 1526-1492
Stepanyants, Yury and Yeoh, Guan (2008) Interaction of gaseous bubbles under the action of radiation modified Bjerknes force. In: 22nd International Congress of Theoretical and Applied Mechanics (IC-TAM2008), 24-29 Aug 2008, Adelaide, Australia.
Stepanyants, Yury A. (2008) Solutions classification to the extended reduced Ostrovsky equation. Symmetry, Integrability and Geometry: Methods and Applications (SIGMA), 4.
Khennane, Amar and Tran-Cong, Thanh (2007) Timoshenko beam-solution in terms of integrated radial basis functions. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.
Mai-Duy, Nam and Tanner, Roger I. (2007) A spectral collocation method based on integrated Chebyshev polynomials for two-dimensional biharmonic boundary-value problems. Journal of Computational and Applied Mathematics, 201 (1). pp. 30-47. ISSN 0377-0427
Ku, H. and Trada, M. and Puttgunta, V. C. (2007) Mechanical properties of vinyl ester composites cured by microwave irradiation: pilot study. Key Engineering Materials, 334-33. pp. 537-540. ISSN 1013-9826
Mai-Duy, Nam and Tran-Cong, Thanh (2007) A RBF-based fictitious-domain technique for Dirichlet boundary value problems in multiply-connected domains. In: 3rd Asian-Pacific Congress on Computational Mechanics (APCOM'07) and EPMESC XI, 3-6 Dec 2007, Kyoto, Japan.
Johnson, K. and Lemcke, Pamela M. and Karunasena, W. and Sivakugan, Nagaratnam (2006) Modelling the load-deformation response of deep foundations under oblique loading. Environmental Modelling and Software, 21 (9). pp. 1375-1380. ISSN 1364-8152
Strunin, D. V. (2006) Similarity without diffusion: shear turbulent layer damped by buoyancy. Journal of Engineering Mathematics, 54 (3). pp. 211-224. ISSN 0022-0833
Liu, Hong-Yuan and Yan, Wenyi and Mai, Yiu-Wing (2006) Z-pin bridging in composite laminates and some related problems. Australian Journal of Mechanical Engineering, 3 (1). pp. 11-19.
Melnik, R. V. N. and Strunin, D. V. and Roberts, A. J. (2005) Nonlinear analysis of rubber-based polymeric materials with thermal relaxation models. Numerical Heat Transfer Part A: Applications, 47 (6). pp. 549-569. ISSN 1040-7782
Stepanyants, Yury (2005) Dispersion of long gravity-capillary surface waves and asymptotic equations for solitons. Proceedings of the Russian Academy of Engineering Sciences Series: Applied Mathematics and Mechanics, 14. pp. 33-40.
Dai, Shao-Cong and Yan, Wenyi and Liu, Hong-Yuan and Mai, Yiu-Wing (2004) Experimental study on z-pin bridging law by pullout test. Composites Science and Technology, 64 (16). pp. 2451-2457. ISSN 0266-3538
Merifield, Richard S. and Sloan, Scott W. and Lyamin, Andrei V. (2003) The stability of inclined plate anchors in purely cohesive soil. Technical Report. University of Southern Queensland, Toowoomba, Australia.
Yan, Wenyi and Wang, Chun Hui and Zhang, Xin Ping and Mai, Yiu-Wing (2003) Theoretical modelling of the effect of plasticity on reverse transformation in superelastic shape memory alloys. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing , 354 (1-2). pp. 146-157. ISSN 0921-5093
Yan, Wenyi and Liu, Hong-Yuan and Mai, Yiu-Wing (2003) Numerical study on the mode I delamination toughness of z-pinned laminates. Composites Science and Technology, 63 (10). pp. 1481-1493. ISSN 0266-3538
Strunin, Dmitry V. (2003) Nonlinear instability in generalized nonlinear phase diffusion equation. Progress of Theoretical Physics. Supplement (150). pp. 444-448. ISSN 0375-9687
Sharifian, S. Ahmad and Buttsworth, David R. (2000) Deflection of a pretensioned circular diaphragm due to aerothermal loading. In: 4th Biennial Engineering Mathematics and Applications Conference : Mathematics and Engineering: An Innovative Partnership (EMAC 2000), 10-13 Sep 2000, Melbourne, Australia.
Melnik, R. V. N. and Roberts, A. J. and Thomas, K. A. (2000) Mathematical and numerical analysis of Falk-Konopka-type models for shape-memory alloys. International Journal of Differential Equations and Applications, 1A (3). pp. 291-300. ISSN 1311-2872
Suslov, Sergey A. and Roberts, A. J. (1998) Advection-dispersion in symmetric field-flow fractionation channels. Working Paper. University of Southern Queensland, Faculty of Sciences, Toowoomba, Australia.
Fabrikant, Anatoly and Stepanyants, Yury (1998) Propagation of waves in shear flows. World Scientific, Singapore. ISBN 978-981-02-2052-5