Browse by Faculty

2013

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna (2013) Analysis of a railway turnout system with a spot replacement sleeper. In: ACMSM 22: From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Lokuge, Weena and Aravinthan, Thiru (2013) Effect of fly ash on the behaviour of polymer concrete with different types of resin. Materials and Design, 51 . pp. 175-181. ISSN 0264-1275

Mai-Duy, N and Phan-Thien, N and Khoo, B. C. (2013) A numerical study of strongly overdamped Dissipative Particle Dynamics (DPD) systems. Journal of Computational Physics , 245 . pp. 150-159. ISSN 0021-9991

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. (2013) Effects of chemical treatments on hemp fibre structure. Applied Surface Science, 276 . pp. 13-23. ISSN 0169-4332

Etaati, A. and Wang, H. and Pather, S. and Yan, Z. and Abdanan Mehdizadeh, S. (2013) 3D X-ray microtomography study on fibre breakage in noil hemp fibre reinforced polypropylene composites. Composites Part B: Engineering, 50 . pp. 239-246. ISSN 1359-8368

Uddin, J. and Smith, R. J. and Hancock, N. H. and Foley, J. P. (2013) Evaporation and sapflow dynamics during sprinkler irrigation of cotton. Agricultural Water Management , 125 . pp. 35-45. ISSN 0378-3774

Mat Nawi, Nazmi and Chen, Guangnan and Jensen, Troy and Mehdizadeh, Saman Abdanan (2013) Prediction and classification of sugar content of sugarcane based on skin scanning using visible and shortwave near infrared. Biosystems Engineering, 115 (2). pp. 154-161. ISSN 1537-5110

Etaati, Amir and Dehghani, Kamran (2013) A study on hot deformation behavior of Ni-42.5Ti-7.5Cu alloy. Materials Chemistry and Physics, 140 (1). pp. 208-215. ISSN 0254-0584

Shalwan, A. and Yousif, B. F. (2013) In state of art: mechanical and tribological behaviour of polymeric composites based on natural fibres. Materials and Design, 48 . pp. 14-24. ISSN 0264-1275

Manalo, A. C. (2013) Behaviour of fibre composite sandwich structures under short and asymmetrical beam shear tests. Composite Structures, 99 . pp. 339-349. ISSN 0263-8223

Ku, H. and Epaarachchi, J. and Trada, M. and Wong, P. (2013) Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves. Journal of Reinforced Plastics and Composites, 32 (10). pp. 689-699. ISSN 0731-6844

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. and Followell, D. and Birt, P. (2013) Use of fixed wavelength Fibre-Bragg Grating (FBG) filters to capture time domain data from the distorted spectrum of an embedded FBG sensor to estimate strain with an artificial neural network. Sensors and Actuators A: Physical, 194 . pp. 1-7. ISSN 0924-4247

Zheng, Kan and Liu, Fei and Zheng, Qiang and Xiang, Wei and Wang, Wenbo (2013) A graph-based cooperative scheduling scheme for vehicular networks. IEEE Transactions on Vehicular Technology , 62 (4). pp. 1450-1458. ISSN 0018-9545

McCarthy, Alison C. and Hancock, Nigel H. and Raine, Steven R. (2013) Advanced process control of irrigation: the current state and an analysis to aid future development. Irrigation Science, 31 (3). pp. 183-192. ISSN 0342-7188

Ku, H. and Trada, M. and Tai, P. (2013) Dielectric properties of sawdust reinforced epoxy composites post-cured in microwaves. Journal of Reinforced Plastics and Composites, 32 (10). pp. 765-774. ISSN 0731-6844

Yue, Xuejin and Wang, Yefu and Hong, Tiansheng and Xu, Xing and Liu, Yongxin and Zhang, Zongjie (2013) WSN layout experiment based on radio frequency propagation tests in citrus orchard. Transactions of the Chinese Society for Agricultural Machinery (Nongye Jixie Xuebao), 44 (5). pp. 213-218. ISSN 1000-1298

Dunwoody, Ernest and Apan, Armando and Liu, Xiaoye (2013) Effects of spatial resolution on measurement of landscape function using the landscape leakiness calculator. In: 2013 Surveying and Spatial Sciences Conference: Collect, Connect, Capitalise (SSSC 2013), 17 April - 19 April 2013, Canberra, Australia.

Salim, Omar Hazim and Xiang, Wei and Leis, John (2013) An efficient unequal error protection scheme for 3-D video transmission. In: IEEE Wireless Communication and Networking Conference (WCNC 2013): Connecting the Future, 7-10 Apr 2013, Shanghai, China.

Silitonga, A. S. and Ong, H. C. and Masjuki, H. H. and Mahlia, T. M. I. and Chong, W. T. and Yusaf, Talal F. (2013) Production of biodiesel from Sterculia foetida and its process optimization. Fuel: the science and technology of fuel and energy . ISSN 0016-2361 (In Press)

Cai, Kai and Yue, Xuejun and Hong, Tiansheng and Xu, Xing and Huang, Shuangping (2013) Design of soil moisture sensor based on phase-frequency characteristics of RC networks. Transactions of the Chinese Society of Agricultural Engineering , 29 (7). pp. 36-43. ISSN 1002-6819

Huang, Shuangping and Hong, Tiansheng and Yue, Xuejun and Wu, Weibin and Cai, Kun and Li, Yunyu (2013) Hyperspectral estimation model of total phosphorus content for citrus leaves. Transactions of the Chinese Society for Agricultural Machinery , 44 (4). pp. 202-207. ISSN 1000-1298

Brodie, Ian M. (2013) Rational Monte Carlo method for flood frequency analysis in urban catchments. Journal of Hydrology, 486 . pp. 306-314. ISSN 0022-1694

Hamawand, Ihsan and Yusaf, Talal and Hamawand, Sara (2013) Coal seam gas and associated water: a review paper. Renewable and Sustainable Energy Reviews, 22 . pp. 550-560. ISSN 1364-0321

Huang, Shuangping and Hong, Tiansheng and Yue, Xuejun and Wu, Weibin and Cai, Kun and Xu, Xing (2013) Multiple regression analysis of citrus leaf nitrogen content using hyperspectral technology. Transactions of the Chinese Society of Agricultural Engineering , 29 (5). pp. 132-138. ISSN 1002-6819

Guades, Ernesto and Aravinthan, Thiru and Manalo, Allan and Islam, Mainul (2013) Experimental investigation on the behaviour of square FRP composite tubes under repeated axial impact. Composite Structures, 97 . pp. 211-221. ISSN 0263-8223

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Manalo, Allan (2013) Geometry and restraint effects on the bending behaviour of the glass fibre reinforced polymer sandwich slabs under point load. Materials and Design, 45 . pp. 125-134. ISSN 0264-1275

Shani, Noam and Aravinthan, Vasantha and Rossi, Pierre and Laulan, Guillaume and Ducommun, Pascale and Holliger, Christof (2013) Impact assessment of pumping parameters on groundwater bacterial communities. Ground Water Monitoring and Remediation, 33 (2). pp. 31-37. ISSN 1069-3629

Chong, Albert K. and Majid, Zulkepli (2013) Low-cost compact high-speed camera for human motion study. In: International Workshop on Geoinformation Advances 2012, 7-8 Nov 2012, Johor Baharu, Malaysia.

Ye, Lieping and Ma, Qianli and Miao, Zhiwei and Guan, Hong and Zhuge, Yan (2013) Numerical and comparative study of earthquake intensity indices in seismic analysis. Structural Design of Tall and Special Buildings, 22 (4). pp. 362-381. ISSN 1541-7794

Alshadli, Duaa and Chong, Albert K. and McDougall, Kevin and Al-Baghdadi, Jasim and Milburn, Peter and Newsham-West, Richard (2013) Reliability of a high accuracy image-based system for 3D modelling of the medial longitudinal arch during gait. In: Rahman, Alias Abdul and Boguslawski, Pawel and Gold, Christopher, (eds.) Developments in Multidimensional Spatial Data Models - Lecture Notes in Geoinformation and Cartography. Springer-Verlag, Berlin, Germany, pp. 85-101.

Hamawand, Ihsan and Yusaf, Talal and Rafat, Sardasht (2013) Recycling of waste engine oils using a new washing agent. Energies, 6 (2). pp. 1023-1049.

An-Vo, Duc-Anh (2013) C2-Element radial basis function methods for some continuum mechanics problems. [Thesis (_PhD/Research)] (Unpublished)

Al-lwayzy, Saddam H. and Yusaf, Talal (2013) Chlorella protothecoides microalgae as an alternative fuel for tractor diesel engines. Energies, 6 (2). pp. 766-783.

Ku, H. and Fung, S. Y. and Islam, M. and Li, X. and Chong, Y. P. (2013) A pilot study on flexural properties of epoxy nanoclay reinforced composites. Journal of Reinforced Plastics and Composites, 32 (2). pp. 96-104. ISSN 0731-6844

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2013) A review on the characteristics of gomuti fibre and its composites with thermoset resins. Journal of Reinforced Plastics and Composites, 32 (2). pp. 124-136. ISSN 0731-6844

Nguyen-Ky, T. and Wen, Peng and Li, Yan (2013) Chaos-modified detrended moving average methodology for monitoring the depth of anaesthesia. International Journal of Emerging Trends in Signal Processing, 1 (2). pp. 1-8.

Arhaim, Y. H and Shalwan, A. and Yousif, B. F (2013) Correlation between frictional force, interface temperature and specific wear rate of fibre polymer composites. In: Gupta, K. M., (ed.) Advanced Materials Research. Advanced Materials Research (685). Trans Tech Publications, Switzerland, pp. 45-49. ISBN 978-303785676-5

Ghabraie, Behrooz and Ren, Gang and Ghabraie, Kazem (2013) Effects of thickness of roof layers on optimum design of truss bolt system using finite element modeling techniques. Electronic Journal of Geotechnical Engineering, 13 (A). pp. 147-158.

Wandel, Andrew P. (2013) Extinction predictors in turbulent sprays. Proceedings of the Combustion Institute, 34 (1). pp. 1625-1632. ISSN 1540-7489

Wandel, Andrew P. and Lindstedt, R. Peter (2013) Hybrid multiple mapping conditioning modeling of local extinction. Proceedings of the Combustion Institute, 34 (1). pp. 1365-1372. ISSN 1540-7489

He, Yu-xin and Li, Qi and Kuila, Tapas and Kim, Nam Hoon and Jiang, Tongwu and Lau, Kin-tak and Lee, Joong Hee (2013) Micro-crack behavior of carbon fiber reinforced thermoplastic modified epoxy composites for cryogenic applications. Composites Part B: Engineering , 44 (1). pp. 533-539. ISSN 1359-8368

Etaati, Amir and Dehghani, Kamran and Ebrahimi, G. R. and Wang, Hao (2013) Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations. Metals and Materials International, 19 (1). pp. 5-9. ISSN 1598-9623

Alsaeed, T. and Yousif, B. F. and Ku, H. (2013) The potential of using date palm fibres as reinforcement for polymeric composites. Materials and Design, 43 . pp. 177-184. ISSN 0264-1275

Karki, Sudarshan (2013) 3D Cadastre Implementation issues in Australia. [Thesis (_PhD/Research)] (Unpublished)

Hussin, M. K. and Zhuge, Y. and Bullen, F. and Lokuge, W. P. (2013) A mathematical model for complete stress-strain curve prediction of permeable concrete. In: ACMSM 22: From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Zhuge, Yan (2013) A review of aerogels and their application as a multi-functional building material. Applied Mechanics and Materials, 253-255 . pp. 564-567. ISSN 1660-9336

Nguyen-Ky, Tai and Wen, Peng and Li, Yan (2013) An improved chaos method for monitoring the depth of anaesthesia. In: Proceedings of the International Conference on Computing, Management and Telecommunications (ComManTel 2013), 21-24 Jan 2013, Ho Chi Minh City, Vietnam.

Toujaguez, R. and Ono, F. B. and Martins, V. and Cabrera, P. P. and Blanco, A. V. and Bundschuh, J. and Guilherme, L. R. G. (2013) Arsenic bioaccessibility in gold mine tailings of Delita, Cuba. Journal of Hazardous Materials . ISSN 0304-3894 (In Press)

Nguyen-Ky, Tai and Wen, Peng (Paul) and Li, Yan (2013) Consciousness and depth of anesthesia assessment based on Bayesian analysis of EEG signals. IEEE Transactions on Biomedical Engineering, 60 (6). pp. 1488-1498. ISSN 0018-9294

Francucci, Gaston and Cardona, Francisco and Manthey, Nathan W. (2013) Cure kinetics of an acrylated epoxidized hemp oil-based bioresin system. Journal of Applied Polymer Science, 128 (3). pp. 2030-2037. ISSN 0021-8995

Shiau, Jim and Smith, Catherine (2013) Developing numerical models for the design of cantilever sheet pile wall. In: 1st Australasia and South-East Asia Structural Engineering and Construction Conference (ASEA-SEC-1), 28 Nov-2 Dec 2012, Perth, Australia.

Guades, E. J. and Aravinthan, T. and Manalo, A. C. and Islam, M. M. (2013) Effects of energy level and impact repetitions on the impact fatigue behaviour and post-impact flexural properties of square FRP pultruded tubes. In: ACMSM 22: From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Kist, Alexander A. and Basnet, Badri (2013) Enabling effective and inclusive learning opportunities with software-based remote access laboratories. In: 10th International Conference on Remote Engineering and Virtual Instrumentation (REV 2013): Moving from Design to Innovation and Impact, 6-8 Feb 2013, Sydney, Australia.

Mossad, Ruth and AL-Khaffajy, Marwan (2013) Investigating two configurations of a heat exchanger in an Indirect Heating Integrated Collector Storage Solar Water Heating System. Journal of Energy and Power Engineering, 7 . pp. 66-73. ISSN 1934-8975

Manalo, A. C. and Karunasena, W. and Lau, K. T. (2013) Mechanical properties of bamboo fiber-polyester composites. In: ACMSM 22: From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Shamsuddoha, M. and Islam, M. M. and Aravinthan, T. and Manalo, A. C. and Lau, K. T. (2013) Mechanical properties of epoxy grouts for structural repair. In: ACMSM 22: From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Lokuge, W. P. and Aravinthan, T. (2013) Mechanical properties of polymer concrete with different types of resin. In: ACMSM 22: From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Hafizi, Zohari Mohd and Epaarachchi, Jayantha Ananda and Lau, K. T. (2013) Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test. In: Chiu, W. K. and Galea, S. C., (eds.) Structural health monitoring: research and applications. Key Engineering Materials (558). Trans Tech Publications Inc., Zurich, Switzerland , pp. 65-75. ISBN 978-3-03785-715-1

Al-Nuaimi, Hamdi and Ayers, Ron and Somasundaraswaran, Kathirgamalingam (2013) Modelling interrupted flow conditions on an arterial road using VISSIM software. In: 14th Road Engineering Association of Asia and Australasia Conference (REAAA 2013): The Road Factor in Economic Transformation, 26-28 Mar 2013 , Kuala Lumpur, Malaysia.

Wang, Gengkun and Xiang, Wei and Yuan, Jinhong (2013) Multi-hop compute-and-forward for generalized two-way relay channels. Transactions on Emerging Telecommunications Technologies . pp. 1-13. (In Press)

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2013) Multi-objective design optimisation of GFRP sandwich beams. In: ACMSM 22: From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Mossad, Ruth and Aral, Hal (2013) Numerical prediction of the performance of horizontal sand filters as the pitch of the spiral protrusion changes. Water Science and Technology, 67 (10). pp. 2249-2256. ISSN 0273-1223

Li, Qiang and Wang, Hao and Zhang, Zuhua and Reid, Andrew (2013) Numerical simulation of porosity on thermal properties and fire resistance of foamed concrete. Journal of Sustainable Cement-Based Materials . pp. 1-7. ISSN 2165-0373 (In Press)

AL-Khaffajy, Marwaan and Mossad, Ruth (2013) Optimization of the heat exchanger in a flat plate indirect heating integrated collector storage solar water heating system. Renewable Energy, 57 . pp. 413-421. ISSN 0960-1481

Kahandawa, Gayan C. and Epaarachchi, Jayantha A.. and Wang, Hao and Lau, K. T. (2013) Prediction of obsolete FBG sensor using ANN for efficient and robust operation of SHM systems. In: Chiu, W. K. and Galea, S. C., (eds.) Structural health monitoring: research and applications. Key Engineering Materials (558). Trans Tech Publications Inc., Zurich, Switzerland , pp. 546-553. ISBN 978-3-03785-715-1

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2013) Properties and behaviour of gomuti fibre composites under tensile and compressive load. In: ACMSM 22: From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Yan, Z. L. and Wang, H. and Lau, K. T. and Pather, S. and Zhang, J. C. and Lin, G. and Ding, Y. (2013) Reinforcement of polypropylene with hemp fibres. Composites Part B: Engineering , 46 . pp. 221-226. ISSN 1359-8368

Campbell, Glenn (2013) Remote sensing of algal blooms in inland waters using the matrix inversion method and semi empirical algorithms. In: Yang, Xiaojun and Li, Lonathon, (eds.) Advances in mapping from remote sensor imagery. Taylor & Francis (CRC Press), Boca Raton, Florida, pp. 279-308. ISBN 978-1-4398-7458-5

Maxwell, Andrew and Fogarty, Roderick and Gibbings, Peter and Noble, Karen and Kist, Alexander A. and Midgley, Warren (2013) Robot RAL-ly international - Promoting STEM in elementary school across international boundaries using remote access technology. In: 10th International Conference on Remote Engineering and Virtual Instrumentation (REV 2013): Moving from Design to Innovation and Impact, 6-8 Feb 2013, Sydney, Australia.

Shahidi, A. M. and Smith, R. and Gillies, M. (2013) Seepage rate estimation from total channel control data during periods of shut down: preliminary data quality assessment. Case study: Coleambally irrigation system. In: 4th International Conference on Sustainable Irrigation and Drainage: Management, Technologies and Policies , 11-13 Dec 2012, Adelaide, Australia.

Shiau, Jim (2013) Shakedown analysis of layered continuum. In: 1st Australasia and South East Asia Conference in Structural Engineering and Construction (ASEA-SEC-1), 28 Nov-2 Dec 2012, Perth, Australia.

Bajracharya, R. M. and Lokuge, W. P. and Karunasena, W. and Lau, K.T. and Mosallam, A. S. (2013) Structural evaluation of concrete expanded polystyrene sandwich panels for slab applications. In: ACMSM 22: From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Nirmal, Umar and Hashim, Jamil and Rilling, Dirk and Brevern, P. V. and Yousif, B. F. (2013) Tribo performance of T-BFRP composite subjected to dry/wet contact conditions. In: Thomas, Sabu and Ninan, Neethu and Mohan, Sneha and Francis, Elizabeth, (eds.) Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Advances in Materials Science (2). Apple Academic Press, Toronto, Canada, pp. 311-326. ISBN 978-1-926895-16-1

2012

Liu, Fei and Xiang, Wei and Zhang, Yueying and Zheng, Kan and Zhao, Hui (2012) A novel QoE-based carrier scheduling scheme in LTE-advanced networks with multi-service. In: 2012 IEEE Vehicular Technology Conference (VCT 2012-Fall), 3-6 Sept 2012, Quebec City, QC, Canada.

Al-Nuaimi, Hamdi and Ayers, Ron and Somasundaraswaran, Kathirgamalingam (2012) The effectiveness of using variable speed limit on the performance of an interrupted flow. In: 2012 IASTED International Conference: Engineering Applications for the 21st Century (EAS 2012) , 27-29 Dec 2012, Colombo, Sri Lanka.

Long, Hang and Xiang, Wei and Zhang, Yueying and Wang, Jing and Wu, Bin (2012) Analysis of unitary distributed spatial-temporal precoding in MIMO relay systems. In: 12th IEEE International Conference on Computer and Information Technology, 27-29 Oct 2012, Chengdu, China.

Abdulla, Shahab and Wen, Peng and Zude, Zhou and Quan, Liu (2012) Model based predictive control of depth of anaesthesia. In: 2012 International Conference on Innovative Design and Manufacturing (ICIDM 2012), 12-14 Dec 2012, Taipei, Taiwan.

Thota, Narasimha Murthy and Eepaarachchi, Jayantha A. and Lau, K. T. (2012) Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study. In: 7th Australasian Congress on Applied Mechanics (ACAM 7), 9-12 Dec 2012, Adelaide, Australia.

Sharifian, Ahmad and Hashempour, Javad (2012) Dilution of toxic gases and smoke emissions from residential chimneys using a low-cost cap. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Karimkashi, Shervin and Kermani, Mohammad J. and Sharifian, Ahmad and Hashempour, Javad (2012) Numerical computation of pressure drop across an off supplementary firing burner in heat recovery steam generator. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Al-Faruk, A. and Sharifian, S. A. and Al-Atresh, S. (2012) Numerical investigation of performance of a new type of savonius turbine. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Al-Atresh, R. S. and Sharifian, S. A. and Al-Faruk, A. (2012) The effect of inlet velocity and temperature on the strength of the swirling induced by a spilt channel: a CFD approach. In: 18th Australasian Fluid Mechanics Conference (AFMC 2012), 3-7 Dec 2012, Launceston, Australia.

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of full-scale railway turnout sleepers from glue-laminated fibre composite sandwich structures. Journal of Composites for Construction, 16 (6). pp. 724-736. ISSN 1090-0268

Noor, M. M. and Wandel, Andrew P. and Yusaf, Talal (2012) A review of mild combustion and open furnace design consideration. International Journal of Automotive and Mechanical Engineering, 6 (1). pp. 730-754. ISSN 2229-8649

Kist, Alexander A. (2012) Barriers to adopting remote access laboratory learning activities. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

Dowling, David and Kavanagh, Lydia and Goldfinch, Tom (2012) Building a career in engineering education. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

Yousif, B. F. and Orupabo, C. and Azwa, Z. N. (2012) Characteristics of kenaf fibre immersed in different solutions. Journal of Natural Fibers, 9 (4). pp. 207-218. ISSN 1544-0478

Alajel, Khalid and Xiang, Wei and Sileh, Ibrahim (2012) Color plus depth 3-D video transmission with hierarchical 16-QAM. In: 6th International Conference on Signal Processing and Communication Systems (ICSPCS 2012) , 12-14 Dec 2012, Gold Coast, Australia.

Wen, Peng (2012) Consciousness, EEG and depth of anaesthesia monitoring. Australasian Physical and Engineering Science in Medicine, 35 (4). pp. 389-392. ISSN 0158-9938

Jolly, Lesley and Brodie, Lyn and Prpic, Juliana Kaya and Crosthwaite, Caroline and Kavanagh, Lydia and Buys, Laurie (2012) Curriculum development and educational research: the barriers to good practice and what to do about them. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 2-5 Dec 2012, Melbourne, Australia.

Dowling, David and Hadgraft, Roger (2012) Defining your discipline to authenticate your curriculum. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 2-5 Dec 2012, Melbourne, Australia.

Kahandawa, G. C. and Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) Detecting delamination in a composite structure using an embedded FBG – AE hybrid system. In: 7th Australasian Congress on Applied Mechanics (ACAM 7), 9-12 Dec 2012, Adelaide, Australia.

Devine, Jo (2012) Digging deeper using 'habitus' – a fresh approach to understanding student behaviour. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

Devine, Jo and Lokuge, Weena (2012) Engaging distance students through online tutorials. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

Bowtell, Les and Moloney, Clint and Kist, Alexander A. and Parker, Victoria and Maxwell, Andrew and Reedy, Natasha (2012) Enhancing nursing education with remote access laboratories. International Journal of Online Engineering, 8 (special issue 2). pp. 52-59. ISSN 1868-1646

Yue, Xue-Jun and Hong, Tian-Sheng and Xiang, Wei and Cai, Kun and Xu, Xing (2012) High performance micro CO sensors based on ZnO-SnO2 composite nanofibers with anti-humidity characteristics. Chinese Physics Letters, 29 (12). pp. 1-4. ISSN 0256-307X

Yousif, B. F. and Basson, Marita and Hobohm, Carola (2012) Implementing multimedia resources in online learning and its effect on student understanding. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

Leis, John and Sharifi, Behrooz (2012) Infrared camera imaging algorithm to augment CT-assisted biopsy procedures. In: 6th International Conference on Signal Processing and Communication Systems (ICSPCS 2012), 12-14 Dec 2012, Gold Coast, Australia .

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2012) Investigation of the free vibration behaviour of an innovative GFRP sandwich floor panel. Construction and Building Materials, 37 . pp. 209-219. ISSN 0950-0618

Yang, Tao and Yao, Xiao and Zhang, Zuhua and Wang, Hao (2012) Mechanical property and structure of alkali-activated fly ash and slag blends. Journal of Sustainable Cement-Based Materials, 1 (4). pp. 167-178. ISSN 2165-0373

Manalo, Allan and Aravinthan, Thiru (2012) Peer assisted learning in an online postgraduate course on engineered fibre composites. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

Briody, Felicity and Goh, Steven and Dawes, Les (2012) Power of engineering: changing the perceptions of year 9 and 10 female school students towards an engineering career. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

Banhazi, T. M. and Babinszky, L. and Halas, V. and Tscharke, M. (2012) Precision livestock farming: precision feeding technologies and sustainable livestock production. International Journal of Agricultural and Biological Engineering , 5 (4). pp. 54-61. ISSN 1934-6344

Zhang, Zuhua and Wang, Hao and Provis, John L. (2012) Quantitative study of the reactivity of fly ash in geopolymerization by FTIR. Journal of Sustainable Cement-Based Materials, 1 (4). pp. 154-166. ISSN 2165-0373

Leis, John and Kelly, Christopher and Buttsworth, David (2012) Sampling, quantization and computational aspects of the quadrature lock-in amplifier. In: 6th International Conference on Signal Processing and Communication Systems (ICSPCS 2012) , 12-14 Dec 2012, Gold Coast, Australia.

Wandel, Andrew P. and Willey, Keith (2012) Student perceptions of teammates' performance: influence of team formation method. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

Basnet, Badri and Basson, Marita and Hobohm, Carola and Cochrane, Sandra (2012) Students' self-assessment of assignments - is it worth it? In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 2-5 Dec 2012, Melbourne, Australia.

Goh, Steven and Cochrane, Sandra and Brodie, Megan (2012) The impact on values and learning behaviours of engineering students from an authentic learning environment: preliminary analysis and observations. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

Thorpe, David (2012) Towards authentic assessment - an evaluation of assessment in a postgraduate engineering asset management course. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 2-5 Dec 2012, Melbourne, Australia.

Jolly, Hannah and Brodie, Lyn and Midgley, Warren (2012) Understanding best practice in engineering education using the concept of pedagogical content knowledge. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

Ghude, Sarang and Billingsley, John (2012) Iterative fast model control strategy with state constraints: an example of aircraft lateral control. In: 19th International Conference on Mechatronics and Machine Vision in Practice (M2VIP 2012), 28-30 Nov 2012, Auckland, New Zealand.

Wang, Gengkun and Xiang, Wei and Yuan, Jinhong (2012) Compute-and-forward in generalized multi-way relay channels. IEEE Communications Letters, 16 (12). pp. 2099-2102. ISSN 1089-7798

Wardana, I. N. G. (2012) Burning characteristics of coconut oil In micro-combustor. In: USQ Combustion Meeting, 26 Nov 2012, Toowoomba, Australia.

Wardana, I. N. G. (2012) Premixed combustion of coconut oil in a hele-shaw shell. In: USQ Combustion Meeting, 26 Nov 2012, Toowoomba, Australia.

Ku, H. and Yap, Y. S. and Lee, T. S. and Trada, M. (2012) Tensile properties of phenol-formaldehyde nanoclay reinforced composites: a pilot study. Journal of Applied Polymer Science, 126 (s2). E142-E150. ISSN 0021-8995

Nguyen, T. and Ghabraie, K. and Tran-Cong, T. (2012) Tunnel reinforcement optimisation for nonlinear material. In: 4th International Conference on Computational Methods (ICCM 2012), 25-28 Nov 2012, Gold Coast, Australia.

Al-Sandooq, J. M. and Yousif, B. F. and Jensen, T. A. (2012) Tribological consideration in roller mill machines for agriculture applications. Surface Review and Letters, 19 (6). pp. 1250065-1. ISSN 0218-625X

Yusaf, T. F. and Ahmed Al-Juboori, Raed (2012) Investigating the efficiency of ultrasound for controlling bio-fouling in batch membrane systems. In: USQ Combustion Meeting, 21 Nov 2012, Toowoomba, Australia. (Unpublished)

Yusaf, T. F. and Al-lwayzy, Saddam H. (2012) The use of microalgae biodiesel in diesel engine: production, extraction and engine performance. In: USQ Combustion Meeting, 21 Nov 2012, Toowoomba, Australia. (Unpublished)

Aravinthan, T. (2012) Composites in civil infrastructure – R&D to applications. In: 6th International Composites Conference (ACUN 6): Composites and Nanocomposites in Civil, Offshore and Mining Infrastructure , 14-16 Nov 2012, Melbourne, Australia.

Lokuge, W. and Eberhard, D. and Karunasena, W. (2012) Geopolymer concrete with FRP confinement. In: 6th International Composites Conference (ACUN 6): Composites and Nanocomposites in Civil, Offshore and Mining Infrastructure , 14-16 Nov 2012, Melbourne, Australia.

Manalo, A. C. (2012) Recent developments on fibre composite sandwich structures in civil infrastructure. In: 6th International Composites Conference (ACUN 6): Composite and Nanocomposites in Civil, Offshore and Mining Infrastructure, 14-16 Nov 2012, Melbourne, Australia.

Falzon, P. and Leong, K. H. and McGarva, L. and Leong, Y. L. and Manalo, A. and Virk, A. and Leipnik, D. and Djukic, L. (2012) Development and assessment of a carbon fibre reinforced composite repair system. In: 8th Asian-Australasian Conference on Composite Materials, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2012) Development of smart wind turbine blades. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8) :Composites: Enabling Tomorrow’s Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Wang, J. and Ma, Z. and Lv, Z. and Sheng, Y. and Xiang, W. (2012) Fairness-aware resource partition and routing in relay-enhanced orthogonal-frequency-division-multiple-accessing cellular networks. IET Communications, 6 (16). pp. 2613-2620. ISSN 1751-8628

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. and Lau, K. T. (2012) Optimized FBG sensor network for efficient detection of a delamination in FRP structures. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Thai-Quang, N. and Le-Cao, K. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2012) A high-order compact integrated-RBF scheme for time-dependent problems. In: 4th International Conference on Computational Methods (ICCM 2012), 25-28 Nov 2012, Gold Coast, Australia.

Mai-Cao, L. and Tran-Cong, T. (2012) A new IRBFN scheme for the numerical simulation of interfacial flows. In: 4th International Conference on Computational Methods (ICCM 2012), 25-28 Nov 2012, Gold Coast, Australia.

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2012) A review of FRP composite truss systems and its connection. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22): Materials to Structures: Advancement through Innovation , 11-14 Dec 2012, Sydney, Australia.

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8) :Composites: Enabling Tomorrow’s Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Al-Baghdadi, Jasim Ahmed and Chong, Albert K. and McDougall, Kevin and Alshadli, Duaa (2012) An investigation of the 3-dimensional surface capture techniques of the human foot. In: International Workshop on Geoinformation Advances 2012, 7-8 Nov 2012, Johor Bahru, Malaysia.

Hoang-Trieu, T.-T. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2012) Compact local integrated RBF stencil based on finite volume formulation for second-order differential problems. In: 4th International Conference on Computational Methods (ICCM 2012), 25-28 Nov 2012, Gold Coast, Australia.

Pham-Sy, N. and Hoang-Trieu, T.-T. and Tran, C.-D. and Mai-Duy, N. and Tran-Cong, T. (2012) Development of parallel algorithm for boundary value problems using compact local integrated RBFN and domain decomposition. In: 4th International Conference on Computational Methods (ICCM 2012), 25-28 Nov 2012, Gold Coast, Australia.

Yang, T. and Yao, X. and Zhang, Z. and Wang, H. (2012) Effects of ground granulated blast furnace slag on the mechanical and microstructure of fly ash-based geopolymer binders. In: 8th Asian-Australasian Conference on Composite Materials, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Shahid, S. and Wen, P. and Ahfock, T. (2012) Effects of model complexity and tissue anisotropic conductivity on cortical modulation during transcranial direct current stimulation. IET Science, Measurement and Technology, 6 (6). pp. 464-473. ISSN 1751-8822

Azam, Gausul and Grant, Cameron D. and Nuberg, Ian K. and Murray, Robert S. and Misra, Rabindra K. (2012) Establishing woody perennials on hostile soils in arid and semi-arid regions: a review. Plant and Soil, 360 (1/2). pp. 55-76. ISSN 0032-079X

Mills, Julie E. and Ma, Xing and Zhuge, Yan (2012) Experimental study on multi-panel retrofitted steel transmission towers. Journal of Constructional Steel Research, 78 . pp. 58-67. ISSN 0143-974X

Yan, Z. L. and Wang, H. and Lau, K. T. and Zhang, J. C. and Zhang, H. and Ding, Y. (2012) Fabrication process optimization of hemp fibre reinforced polypropylene composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Li, Qiang and Wang, Hao and Bullen, Frank and Reid, Andrew (2012) Numerical simulation of porous structure in foam concrete on thermal insulation property. In: 8th Asian-Australasian Conference on Composite Materials, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Simmons, Shane (2012) Surveying and spatial science programs in AUS and NZ as an educational pathway to land surveyor registration. Spatial Science Queensland . pp. 29-33.

Zhang, Z. and Wang, H. and Provis, J. L. (2012) The reactivity of fly ash in geopolymer synthesis: a qualification study by FTIR. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Abdulla, Shahab Anna (2012) Depth of anaesthesia control techniques and human body models. [Thesis (_PhD/Research)] (Unpublished)

Brookshaw, Iain J. and Low, Tobias (2012) Monocular vision, optical blur and visual looming as a basis for mobile robot obstacle avoidance. In: 16th International Conference on Mechatronics Technology (ICMT 2012): Advanced Mechatronics, Precision Measurement and NanoManufacturing, 16-19 Oct 2012, Tianjin, China.

Billingsley, John (2012) The place of mechatronics within the faculty structure – a personal view. In: 16th International Conference on Mechatronics Technology: Advanced Mechatronics, Precision Measurement and NanoManufacturing (ICMT 2012), 16-19 Oct 2012, Tianjing, China.

Al-lwayzy, Saddam H. (2012) Alternative fuels from microalgae for diesel engine. In: USQ Combustion Meeting, 10 Oct 2012, Toowoomba, Australia. (Unpublished)

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2012) New concept for optimal application of natural fibre reinforced plastic (NFRP) in building construction. In: APSEC-ICCER 2012: Sustaining the World with Better Structures and Construction Practice, 2-4 Oct 2012, Surabaya, Indonesia.

Devine, Jo (2012) Work in progress: can Bourdieu's Habitus provide a theoretical framework for engineering education research? In: 42nd ASEE/IEEE Frontiers in Education Conference (FIE 2012): Soaring to new Heights in Engineering Education, 3-6 Oct 2012, Seattle, WA. United States.

Maxwell, Andrew (2012) Work in progress: management of online assessments as a replacement for exams. In: 42nd ASEE/IEEE Frontiers in Education Conference (FIE 2012): Soaring to New Heights in Engineering Education, 3-6 Oct 2012 , Seattle, WA. United States.

Sileh, Ibrahim Khalil and Xiang, Wei (2012) Distributed space-frequency coding for OFDM-based hybrid relay selection. In: 12th International Symposium on Communications and Information Technologies (ISCIT 2012), 2-5 Oct 2012, Gold Coast, Australia.

Sileh, Ibrahim Khalil and Xiang, Wei and Alajel, Khalid Mohamed (2012) Outage probability of unequal block-based OFDM amplify-and-forward relay protocol over wideband channels. In: 12th International Symposium on Communications and Information Technologies (ISCIT 2012), 2-5 Oct 2012, Gold Coast, Australia.

Ross, Pauline and McGowan, Carol G. and Styger, Lee E. J. (2012) A comparison of theory and practice in market intelligence gathering for Australian micro-businesses and SMEs. In: 19th International Business Research Conference, 19-21 Nov 2012, Melbourne, Australia .

Goh, Steven and Zhou, Hong and Bullen, Frank and Davey, Kenneth (2012) An assessment of stress factors on engineering academics in a regional context. In: 42nd ASEE/IEEE Frontiers in Education Conference (FIE 2012): Soaring to New Heights in Engineering Education, 3-6 Oct 2012, Seattle, WA. United States.

Cook, F. J. and Knight, J. H. and Doble, R. C. and Raine, S. R. (2012) An improved solution for the infiltration advance problem in irrigation hydraulics. Irrigation Science . ISSN 0342-7188 (In Press)

Fagg, Ashton (2012) An intelligent vision system for wildlife monitoring. [USQ Project] (Unpublished)

Klinge, Craig Desmond (2012) Behaviour of gang-nail plated timber joints in tension perpendicular to the grain. [USQ Project] (Unpublished)

Handley, Robert (2012) Carbon offsetting through soil carbon sequestration for the coal mining industry: an application of a soil carbon modelling. [USQ Project] (Unpublished)

Salcedo, Precila G. and Maraseni, Tek Narayan and McDougall, Kevin (2012) Carbon sequestration potential of spotted gum (Corymbia citriodora subspecies Variegata) in South East Queensland, Australia. International Journal of Environmental Studies, 69 (5). pp. 770-784. ISSN 0020-7233

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. (2012) Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview. Composites Part B: Engineering, 43 (7). pp. 2883-2892. ISSN 1359-8368

Alajel, Khalid Mohamed and Xiang, Wei (2012) Color plus depth 3-D video transmission with heirarchical 16-QAM. In: 3DTV-CON 2012: The True Vision: Capture, Transmission and Display of 3D Video, 15-17 Oct 2012, Zurich, Switzerland.

Smith, Scott David (2012) Determination of a strategic planning approach for maintenance management of a major road network. [USQ Project] (Unpublished)

Nobbs, Rebecca (2012) Development of advanced SWER models for the Ergon Energy network. [USQ Project] (Unpublished)

Jesshope, Douglas James (2012) Development of an electronically controlled thruster. [USQ Project] (Unpublished)

Cameron, Rick (2012) Effects of on-board HHO and water injection in a diesel generator. [USQ Project] (Unpublished)

Chong, Albert K. (2012) Energy-efficient technique for engineering structural monitoring in the dark. In: International Conference on Civil, Architectural and Hydraulic Engineering (ICCAHE 2012), 10-12 Aug 2012, Zhangaijie, China.

Taylor, Jarrod Lee (2012) Evaluation of the capacity of signalised two lane roundabouts. [USQ Project] (Unpublished)

Manthey, Nathan W. and Cardona, Francisco and Francucci, Gaston M. and Aravinthan, Thiru (2012) Green building materials: hemp oil based biocomposites. In: 2012 World Academy of Science, Engineering and Technology Conference (WASET 2012), 24-25 Oct 2012, Bali, Indonesia.

Dang, Aaditi (2012) Herbicides wash off from cane trash by rainfall. [USQ Project] (Unpublished)

Ho, Mei-po and Wang, Hao and Lau, Kin-tak and Lee, Joong-hee and Hui, David (2012) Interfacial bonding and degumming effects on silk fibre/polymer biocomposites. Composites Part B: Engineering, 43 (7). pp. 2801-2812. ISSN 1359-8368

Warren, Bradley (2012) Investigating mechanisms for effluent pond sealing: the effect of suspended organic particulate on soil hydraulic conductivity. [USQ Project] (Unpublished)

Duffy, Michael Anthony (2012) Investigation into the impacts on 11kV feeder operation as a result of the increasing use of amorphous core transformers. [USQ Project] (Unpublished)

Osbourne, Daniel B. (2012) IV infusion pump training emulator. [USQ Project] (Unpublished)

Flynn, Christopher James (2012) MATLAB based energy market simulator. [USQ Project] (Unpublished)

Zhuge, Yan and Mills, Julie E. and Ma, Xing (2012) Modelling of steel lattice tower angle legs reinforced for increased load capacity. Engineering Structures, 43 . pp. 160-168. ISSN 0141-0296

Willigen, Timothy (2012) Nuclear instruments in mineral processing. [USQ Project] (Unpublished)

Thompson, Simon (2012) Numerical modelling of Big Tyres patented non-pneumatic wheel concept. [USQ Project] (Unpublished)

Zhang, Zhenyu and Liu, Xiaoye and Wright, Wendy (2012) Object-based image analysis for forest species classification using Worldview-2 satellite imagery and airborne LiDAR data. In: International Symposium on Remote Sensing (ISRS 2012), 8th International Conference on Space, Aeronautical and Navigational Electronics (ICSANE 2012), 10-12 Oct 2012, Incheon, Korea.

Baillie, Craig and Chen, Guangnan (2012) Opportunities for reducing on-farm energy use and greenhouse gas emissions in sugarcane. International Sugar Journal, 114 (1366). pp. 725-730. ISSN 0020-8841

Zhang, Zuhua and Yao, Xiao and Wang, Hao (2012) Potential application of geopolymers as protection coatings for marine concrete III. Field experiment. Applied Clay Science, 67-68 . pp. 57-60. ISSN 0169-1317

Long, Hang and Kim, Kyeong Jin and Xiang, Wei and Wang, Jing and Liu, Yuanan and Wang, Wenbo (2012) Precoder distribution and adaptive codebook in wideband precoding. ETRI Journal, 34 (5). pp. 655-665. ISSN 1225-6463

Kist, Alexander A. and Brodie, Lyn (2012) Quality of service, quality of experience and online learning. In: 42nd ASEE/IEEE Frontiers in Education Conference (FIE 2012): Soaring to new Heights in Engineering Education, 3-6 Oct 2012, Seattle, WA. United States.

Clarke, Adam James (2012) Robust deadbeat control of the non-linear magnetic levitation system using adaptive control techniques. [USQ Project] (Unpublished)

du Preez, Matthew (2012) Simulation of monolayer distribution for use in evaporation reduction. [USQ Project] (Unpublished)

Wieck, Travis (2012) Soil chemistry equilibrium as influenced by solution volume and concentration. [USQ Project] (Unpublished)

Manalo, Allan and Mutsuyoshi, Hiroshi and Matsui, Takahiro (2012) Testing and characterization of thick hybrid fibre composites laminates. International Journal of Mechanical Sciences , 63 (1). pp. 99-109. ISSN 0020-7403

Black, Gerard Wiiliam (2012) The investigation of the sustainability of a regional approach to Water Sensitive Urban Design using a Triple Bottom Line Assessment. [USQ Project] (Unpublished)

Whittaker, Adam (2012) The safety benefit of continuous narrow painted median strips. [USQ Project] (Unpublished)

Bates, Matthew (2012) The selection of inegrated and sustainable waste processing techniques for application within Indonesia. [USQ Project] (Unpublished)

Simmons, S. (2012) The structure of academic surveying and spatial science programs in Australia and New Zealand as an educational pathway to land surveyor registration. Azimuth . ISSN 0728-4586

Lonard, Craig Stephen (2012) Urban fringe agriculture and its potential contribution to sustainable cities: a case study of Western Sydney. [USQ Project] (Unpublished)

Palmer, John Michael (2012) Wireless LAN based infrared remote control. [USQ Project] (Unpublished)

Brodie, Lyn and Jolly, Hannah (2012) Work in progress: developing and evaluating tutor training for collaborative teaching. In: 42nd ASEE/IEEE Frontiers in Education Conference (FIE 2012): Soaring to New Heights in Engineering Education , 3-6 Oct 2012, Seattle, WA. United States.

Hairuddin, A. Aziz and Yusaf, Talal F. and Wandel, Andrew P. (2012) HCCI engine: numerical and experimental approach. In: USQ Combustion Meeting, 26 Sep 2012, Toowoomba, Australia. (Unpublished)

Dowling, David (2012) Using the DYD stakeholder consultation process to connect with practitioners to define a set of graduate capabilities for a program. In: 2012 International Conference on Innovation, Practice and Research in Engineering Education (EE2012), 18-20 Sep 2012, Coventry, United Kingdom.

Noor, M. M. and Hairuddin, A. Aziz and Wandel, Andrew P. and Yusaf, T. F. (2012) Modelling of non-premixed turbulent combustion of hydrogen using conditional moment closure method. IOP Conference Series: Materials Science and Engineering, 36 (012036). pp. 1-17. ISSN 1757-899X

Al-Juboori, Raed A. and Yusaf, Talal (2012) Biofouling in RO system: mechanisms, monitoring and controlling. Desalination, 302 . pp. 1-23. ISSN 0011-9164

Espada Jr., Rodolfo and Apan, Armando and McDougall, Kevin (2012) Spatial modelling of adaptation strategies for urban built infrastructures exposed to flood hazards. In: Queensland Surveying and Spatial Conference: The Future of Surveying and Spatial Science is Open (QSSC 2012), 13-14 Sep 2012, Brisbane, Australia.

Yousif, B. F. and Chin, C. W. (2012) Epoxy composite based on kenaf fibers for tribological applications under wet contact conditions. Surface Review and Letters, 19 (5). pp. 1250050-1. ISSN 0218-625X

Thorpe, David (2012) Evaluating factors in sustainable road construction and management: a life cycle approach. In: 28th Annual Association of Researchers in Construction Management Conference (ARCOM 2012), 3-5 Sep 2012, Edinburgh, Scotland.

Sattary, Sattar and Thorpe, David (2012) Optimizing embodied energy of building construction through bioclimatic principles. In: 28th Annual Association of Researchers in Construction Management Conference (ARCOM 2012), 3-5 Sep 2012, Edinburgh, Scotland.

Al Faruk, Abdullah and Sharifian, Ahmad (2012) Angular velocity of a combined unloaded Savonius turbine with a vortex inducing chamber: a CFD approach. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sept 2012, Toowoomba, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) Numerical investigation of influence of air and fuel dilution for open furnace MILD combustion burner. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Hashempour, Javad and Sharifian, Ahmad (2012) Potentials of metal mesh to contain bushfires. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Tangalajuk Siang, Jeri and Sharifian, Ahmad (2012) Reducing the amount of required propane refrigerant in the condenser of a commercial air-conditioner by increasing the inlet temperature. In: Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) The study of air fuel ratio for open furnace MILD combustion of biogas on bluff-body burner. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Tran, Canh-Dung and Mai-Duy, Nam and Tran-Cong, Thanh (2012) Computation of a Fokker-Planck-equation-based multi-scale model for complex flows using the IRBFN method. In: 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), 10-14 Sep 2012, Vienna, Austria.

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru (2012) Cure kinetic study of epoxidized hemp oil cured with a multiple catalytic system. Journal of Applied Polymer Science, 125 (S2). E511-E517. ISSN 0021-8995

Kabir, Mohammad Mazedul (2012) Effects of chemical treatments on hemp fibre reinforced polyester composites. [Thesis (_PhD/Research)] (Unpublished)

Yousif, B. F. and Shalwan, A. and Chin, C. W. and Ming, K. C. (2012) Flexural properties of treated and untreated kenaf/epoxy composites. Materials and Design, 40 . pp. 378-385. ISSN 0264-1275

Easton, Mark A. and Wang, Hao and Grandfield, John and Davidson, Cameron J. and St John, David H. and Sweet, Lisa D. and Couper, Malcolm J. (2012) Observation and prediction of the hot tear susceptibility of ternary Al-Si-Mg alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science , 43 (9). pp. 3227-3238. ISSN 1073-5623

Simmons, Shane (2012) Opening up the profession by addressing the critical shortage of skilled spatial science professionals and attracting new entrants. In: Queensland Spatial Science Conference 2012 (QSSC 2012), 13-14 Sept 2012, Brisbane, Australia.

Banhazi, T. M. and Lehr, H. and Black, J. L. and Crabtree, H. and Schofield, P. and Tscharke, M. and Berckmans, D. (2012) Precision livestock farming: an international review of scientific and commercial aspects. International Journal of Agricultural and Biological Engineering, 5 (3). pp. 1-9. ISSN 1934-6344

Keys, Jason and Ayers, Ron (2012) The effects of improved vehicle technology on the design of acceleration and deceleration lanes at freeway entry and exit ramps. In: 25th Australian Road Research Board Conference: Shaping the Future: Linking Policy, Rresearch and Outcomes (ARRB 2012) , 23-26 Sep 2012, Perth, Australia.

Kahandawa, Gayan C. and Epaarachchi, Jayantha and Wang, Hao and Lau, K. T. (2012) Use of FBG sensors for SHM in aerospace structures. Photonic Sensors, 2 (3). pp. 203-214. ISSN 1674-9251

Ku, H. and Fulcher, R. (2012) Using computer software packages to enhance the teaching in engineering management science: part 3 - simulation. Computer Applications in Engineering Education, 20 (3). pp. 547-552. ISSN 1099-0542

Craig, Ian and Shiau, Jim and Erdei, Laszlo (2012) Contaminated soil/groundwater remediation using Permeable Reactive Barrier (PRB) techniques. In: 2012 Qld Southern Regional Engineering Conference (SREC 2012), 1 Sep 2012, Toowoomba, Australia.

Scarmana, G. (2012) From image contours to pixels. In: XXII Congress of the International Society for Photogrammetry and Remote Sensing (ISPRS 2012), 25 Aug – 01 Sept 2012, Melbourne, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) Investigation of Biogas Moderate or Intense Low Oxygen Dilution (MILD) combustion on open furnace bluff-body burner. In: USQ Combustion Meeting, 29 Aug 2012, Toowoomba, Australia. (Unpublished)

Scarmana, Gabriel (2012) Image enhancement from a stabilised video sequence. In: XXII Congress of the International Society for Photogrammetry and Remote Sensing (ISPRS 2012) , 25 Aug – 01 Sept 2012, Melbourne, Australia.

Salim, Omar Hazim and Xiang, Wei (2012) A novel unequal error protection scheme for 3-D video transmission over cooperative MIMO-OFDM systems. EURASIP Journal on Wireless Communications and Networking, 2012 (269). ISSN 1687-1499 (In Press)

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) A preliminary study of control parameters for open furnace mild combustion using CFD. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) Mild combustion: a technical review towards open furnace combustion. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) Modal analysis of high frequency acoustic signal approach for progressive failure monitoring in thin composite plates. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Noor, M. M. and Rahman, M. M. and Ismail, J., eds. (2012) Proceedings of the 2nd Malaysian Posgraduate Conference (MPC 2012). Education Malaysia, Sydney (EMAS), Gold Coast, Australia.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2012) The modelling of the effect of air fuel ratio on unburned hydrocarbons for MILD combustion. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Long, Hang and Xiang, Wei and Zhang, Yueying and Wang, Jing and Wang, Wenbo (2012) Joint multi-user precoding in multi-relay systems. In: 7th International Conference on Communications and Networking in China (CHINACOM 2012), 8–10 Aug 2012, Kunming, China.

Zainol Zanariah, W. N. and Apan, A. and Le Brocque, A. F. and Maraseni, T. N. (2012) Fine-scale habitat modelling of wildlife species using spatial information tools. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Ono, Fabio Benedito and Guilherme, Luiz Roberto Guimaraes and Penido, Evanise Silva and Carvalho, Geila Santos and Hale, Beverley and Toujaguez, Regla and Bundschuh, Jochen (2012) Arsenic bioaccessibility in a gold mining area: a health risk assessment for children. Environmental Geochemistry and Health, 34 (4). pp. 457-465. ISSN 0269-4042

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of glued fibre composite sandwich structure in flexure: experiment and fibre model analysis. Materials and Design, 39 . pp. 458-468. ISSN 0264-1275

Harris, Bruce and McDougall, Kevin and Barry, Michael (2012) Comparison of multi-scale digital elevation models for defining waterways and catchments over large areas. ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 1-2 . pp. 75-80.

Albdiry, Mushtaq and Alethari, Haydar (2012) Effect of alumina inclusions on microstructure and mechanical properties of 62 WC, 32 (Ti-W) C and 6 Co compacts. International Journal of Microstructure and Materials Properties, 7 (4). pp. 329-340. ISSN 1741-8410

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2012) Experimental and numerical analysis of an innovative GFRP sandwich floor panel under point load. Engineering Structures, 41 . pp. 126-135. ISSN 0141-0296

Paudyal, D. R. and McDougall, K. and Apan, A. (2012) Exploring the application of volunteered geographic information to catchment management: a survey approach. ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, I-4 . pp. 275-280. ISSN 2194-9042

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

Campbell, Glenn and Phinn, Stuart R. (2012) Measuring the particulate backscattering of inland waters: A comparison of techniques. In: XXII Congress of the International Society of Photogrammetry and Remote Sensing (ISPRS 2012), 25 Aug – 01 Sept 2012, Melbourne, Australia.

Sharifian, Ahmad (2012) The effect of direction of low speed winds on the performance of a split chimney. In: 23rd International Congress of Theoretical and Applied Mechanics (ICTAM 2012), 19-24 Aug2012, Beijing, China.

McDougall, K. and Temple-Watts, P. (2012) The use of LiDAR and volunteered geographic information to map flood extents and inundation. ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 1-4 . pp. 251-256.

Alajel, Khalid Mohamed and Xiang, Wei and Wang, Yafeng (2012) Unequal error protection scheme based hierarchical 16-QAM for 3-D video transmission. IEEE Transactions on Consumer Electronics, 58 (3). pp. 731-738. ISSN 0098-3063

Zheng, Kan and Li, Wei and Liu, Fei and Xiang, Wei (2012) Utility-based resource allocation with bipartite matching in OFDMA-based wireless systems. Transactions on Internet and Information Systems , 6 (8). pp. 1913-1925.

Palendeng, Mario E. and Zhang, Qing and Pang, Chaoyi and Li, Yan (2012) EEG data compression to monitor DoA in telemedicine. In: HIC 2012: 20th Australian National Health Informatics Conference: Health Informatics: Building a Healthcare Future Through Trusted Information , 30 Jul-2 Aug 2012, Sydney, Australia.

Al-Juboori, Raed A. and Yusaf, Talal (2012) Identifying the optimum process parameters for ultrasonic cellular disruption of e. coli. International Journal of Chemical Reactor Engineering, 10 (1). pp. 1-32. ISSN 1542-6580

Ghabraie, B. and Ren, G. and Xie, Y. M. and Ghabraie, K. (2012) Study of truss bolt system for highly stressed rock mass using finite element modelling techniques. In: 11th Australia New Zealand Conference on Geomechanics: Ground Engineering in a Changing World, 15-18 July 2012, Melbourne, Australia.

Mat Nawi, Nazmi and Chen, Guangnan and Jensen, Troy and Baillie, Craig (2012) Potential technologies to measure sugarcane quality in the field. In: 2012 International Conference of Agricultural Engineering (CIGR-AgEng 2012), 8-12 July 2012, Valencia, Spain.

Mat Nawi, Nazmi and Chen, Guangnan and Jensen, Troy and Baillie, Craig (2012) Prediction of sugar content along the height of sugarcane internodes using VisNIR. In: 2012 International Conference of Agricultural Engineering (CIGR-AgEng 2012), 8-13 July 2012, Valencia, Spain.

Alsaeed, T. and Alajmi, A. and Yousif, B. F. and Ku, H. and Lau, Alan Kin-tak (2012) Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

Tawfik, Qaidar H. and Karunasena, Warna (Karu) and Cardona, Francisco (2012) Strengthening of corroded steel angles using CFRP. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2012) Design of smart structures for wind turbine blades. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Abdulla, Shahab and Wen, Peng (2012) Depth of anaesthesia control investigation using robust deadbeat control technique. In: 2012 International Conference on Complex Medical Engineering (CME 2012), 1-4 Jul 2012, Kobe, Japan .

Somasundaraswaran, Kathirgamalingam (2012) Impact of the application of international quality processes on engineering education at universities in Sri Lanka. Journal of Professional Issues in Engineering Education and Practice, 138 (3). pp. 193-197. ISSN 1052-3928

Dehkhoda, Sevda and Hood, Michael and Alehossein, Habib and Buttsworth, David (2012) Analytical and experimental study of pressure dynamics in a pulsed water jet device. Flow, Turbulence and Combustion, 89 (1). pp. 97-119. ISSN 1386-6184

Leis, John (2012) Animating algorithms as a DSP teaching tool. International Journal of Electrical Engineering Education, 49 (3). pp. 321-333. ISSN 0020-7209

Nicolli, Hugo B. and Bundschuh, Jochen and Blanco, Maria del C. and Tujchneider, Ofelia C. and Panarello, Hector O. and Dapena, Cristina and Rusansky, Jorge E. (2012) Arsenic and associated trace-elements in groundwater from the Chaco-Pampean plain, Argentina: results from 100 years of research. Science of the Total Environment, 429 . pp. 36-56. ISSN 0048-9697

McClintock, Tyler R. and Chen, Yu and Bundschuh, Jochen and Oliver, John T. and Navoni, Julio and Olmos, Valentina and Lepori, Edda Villaamil and Ahsan, Habibul and Parvez, Faruque (2012) Arsenic exposure in Latin America: biomarkers, risk assessments and related health effects. Science of the Total Environment, 429 . pp. 76-91. ISSN 0048-9697

Bundschuh, Jochen and Nath, Bibhash and Bhattacharya, Prosun and Liu, Chen-Wuing and Armienta, Maria Aurora and Lopez, Myriam V. Moreno and Lopez, Dina L. and Jean, Jiin-Shuh and Cornejo, Lorena and Macedo, Luciene Fagundes Lauer and Filho, Alfredo Tenuta (2012) Arsenic in the human food chain: the Latin American perspective. Science of the Total Environment, 429 . pp. 92-106. ISSN 0048-9697

Lopez, Dina L. and Bundschuh, Jochen and Birkle, Peter and Armienta, Maria Aurora and Cumbal, Luis and Sracek, Ondra and Cornejo, Lorena and Ormachea, Mauricio (2012) Arsenic in volcanic geothermal fluids of Latin America. Science of the Total Environment, 429 . pp. 57-75. ISSN 0048-9697

Hoinkis, J. and Hermann, M. and Schmidt, S. and Gukelberger, E. and Ghosh, A. and Chatterjee, D. and Bundschuh, J. (2012) Arsenic removal from groundwater by small-scale reverse osmosis unit in rural Bihar, India. In: 4th International Congress on Arsenic in the Environment: Understanding the Geological-Medical Interface of Arsenic (AS 2012), 22-27 Jul 2012, Cairns, Australia.

Nirmal, Umar and Hashim, Jamil and Lau, Saijod T. W. and Yuhazri, M. Y. and Yousif, B. F. (2012) Betelnut fibres as an alternative to glass fibres to reinforce thermoset composites: a comparative study. Textile Research Journal, 82 (11). pp. 1107-1120. ISSN 0040-5175

Lim, M. C. and Setan, H. and Othman, R. and Chong, A. K. (2012) Deformation detection for ISKANDARnet. Survey Review , 44 (326). pp. 198-207. ISSN 0039-6265

Aullon Alcaine, A. and Sandhi, A. and Bhattacharya, P. and Jacks, G. and Bundschuh, J. and Thunvik, R. and Schulz, C. and Morth, C. M. (2012) Distribution and mobility of geogenic arsenic in the shallow aquifers of the northeast of La Pampa, Argentina. In: 4th International Congress on Arsenic in the Environment: Understanding the Geological and Medical Interface of Arsenic (AS 2012), 22-27 Jul 2012, Cairns, Australia.

Litter, Marta I. and Bundschuh, Jochen (2012) Emerging options for solving the arsenic problems of rural and periurban areas in Latin America. In: 4th International Congress on Arsenic in the Environment: Understanding the Geological-Medical Interface of Arsenic (AS 2012), 22-27 Jul 2012, Cairns, Australia.

Meor Said, Mior Azman (2012) In-Cylinder radiation heat transfer in a small direct injection diesel engine. [Thesis (_PhD/Research)] (Unpublished)

Bundschuh, Jochen and Litter, Marta I. and Parvez, Faruque and Roman-Ross, Gabriela and Nicolli, Hugo B. and Jean, Jiin-Shuh and Liu, Chen-Wuing and Lopez, Dina and Armienta, Maria A. and Guilherme, Luiz R. G. and Cuevas, Alina Gomez and Cornejo, Lorena and Cumbal, Luis and Toujaguez, Regla (2012) One century of arsenic exposure in Latin America: a review of history and occurrence from 14 countries. Science of the Total Environment, 429 . pp. 2-35. ISSN 0048-9697

Zhang, Zuhua and Wang, Hao and Provis, John L. and Bullen, Frank and Reid, Andrew and Zhu, Yingcan (2012) Quantitative kinetic and structural analysis of geopolymers, Part 1. The activation of metakaolin with sodium hydroxide. Thermochimica Acta, 539 . pp. 23-33. ISSN 0040-6031

Zheng, Kan and Hu, Fanglong and Wang, Wenbo and Xiang, Wei and Dohler, Mischa (2012) Radio resource allocation in LTE-advanced cellular networks with M2M communications. IEEE Communications Magazine, 50 (7). pp. 184-192. ISSN 0163-6804

Schmidt, Erik and Giles, Rick and Davis, Rod and Baillie, Craig and Jensen, Troy and Sandell, Gary and Norris, Chris (2012) Sustainable biomass supply chain for the Mallee woody crop industry. RIRDC Publication (11). Rural Industries Research and Develpment Corporation RIRDC), Canberra, Australia. ISBN 978-1-74254-377-2

Widodo, Agung Sugeng (2012) Temperature variations in a free piston compression wind tunnel. [Thesis (_PhD/Research)] (Unpublished)

Zhuge, Yan and Brodie, Lyn and Mills, Julie (2012) The effectiveness of team project work for distance education students. In: 8th International CDIO Conference (Conceive Design Implement Operate 2012), 1-4 Jul 2012, Brisbane, Australia.

Abeysekera, Vasantha (2012) A conceptual framework for client financed construction and non-traditional approaches for financing construction work. In: World Construction Conference 2012: Global Challenges in Constrcution Industry, 28-30 June 2012, Colombo, Sri Lanka.

Abeysekera, Vasantha and Soysa, Mohantha (2012) Monetary retentions for subcontract work: a risk-based approach. In: World Construction Conference 2012: Global Challenges in Constrcution Industry, 28-30 June 2012, Colombo, Sri Lanka.

Abeysekera, Ashoka and Abeysekera, Vasantha (2012) Motivating the construction academic: a conceptual study. In: World Construction Conference 2012: Global Challenges in Constrcution Industry, 28 - 30 June 2012, Colombo, Sri Lanka.

Abeysekera, Vasantha (2012) Resolving retention polarity: the perceptions of structural steel fabricators. In: World Construction Conference 2012: Global Challenges in Constrcution Industry, 28-30 June 2012, Colombo, Sri Lanka.

Uddin, Jasim and Smith, Rod and Hancock, Nigel and Foley, Joseph (2012) New approach to estimate the additional water requirements in sprinkler irrigation: a predictive model. In: ICID & Irrigation Australia 2012 Conference and Trade Show , 24-29 June 2012, Adelaide, Australia.

Akbar, Ghani and Raine, Steven and McHugh, Allen and Hamilton, Greg (2012) A soil management technique to enhance lateral infiltration (subbing) in permanent raised beds. In: ICID & Irrigation Australia 2012 Conference and Trade Show, 24-29 June 2012, Adelaide, Australia.

Uddin, Jasim and Smith, Rod and Hancock, Nigel and Foley, Joseph (2012) A novel technique to measure the total evaporation and its components during sprinkler irrigation. In: ICID and Irrigation Australia 2012 Conference and Trade Show, 24-29 Jun 2012, Adelaide, Australia.

Akbar, Ghani and Raine, Steven and McHugh, Allen and Hamilton, Greg (2012) Impact of renovating permanent raised beds on water use productivity under vertisol. In: ICID & Irrigation Australia 2012 Conference and Trade Show, 24-29 June 2012, Adelaide, Australia.

Long, Hang and Xiang, Wei and Liu, Hongmei and Shen, Shanshan (2012) Diversity analysis of two-way MIMO relaying system based on zero-forcing. In: IEEE International Conference on Communications (ICC 2012): Connect, Communicate, Collaborate, 10-15 Jun 2012, Ottawa, ON. Canada.

Mo, Chun-li and Li, Qiang and Guo, Xu-ming and Wang, Hao (2012) Numerical simulation the temperature field of the multi-coil batch during annealing process in Bell-type furnace. Advanced Materials Research, 538-541 . pp. 637-641. ISSN 1022-6680

Aravinthan, Thiru and Manalo, Allan (2012) Field applications and case studies of FRP in civil infrastructure: the Australian experience. In: 6th International Conference on FRP Composites in Civil Engineering (CICE 2012) , 13-15 Jun 2012, Rome, Italy.

Ramesh Kumar, Nandini and Xiang, Wei and Wang, Yafeng (2012) Two-symbol FPGA architecture for fast arithmetic encoding in JPEG 2000. Journal of Signal Processing Systems, 69 (2). pp. 213-224. ISSN 1939-8018

Nguyen-Ky, Tai and Wen, Peng and Li, Yan and Malan, Mel (2012) Measuring the hypnotic depth of anaesthesia based on the EEG signal using combined wavelet transform, eigenvector and normalisation techniques. Computers in Biology and Medicine, 42 (6). pp. 680-691. ISSN 0010-4825

Khattak, Hamid and Ku, Harry and Goh, Steven (2012) Courses for teaching leadership capacity in professional engineering degrees in Australia and Europe. European Journal of Engineering Education, 37 (3). pp. 279-296. ISSN 0304-3797

Chong, Albert K. (2012) Exploiting HD camcorders for close-up human movement applications. Photogrammetric Record, 27 (138). pp. 227-237. ISSN 0031-868X

Simmons, Shane (2012) Surveying programs in NSW and USQ and introduction of a new major at USQ. Spatial Science Queensland . pp. 32-33.

Pittaway, P. and Martinez-Alvarez, V. and Gallego-Elvira, B. and Hancock, N. (2012) The impact of artificial monolayers on water quality: data from tank and field trials. In: 4th Urban Water Security Reseach Alliance Science Forum and Stakeholder Engagement, 19-20 Jun 2012, Brisbane, Australia.

Ghabraie, Kazem (2012) Applications of topology optimization techniques in seismic design of structure. In: Plevris, Vagelis and Mitropoulou, Chara Ch. and Lagaros, Nikos D., (eds.) Structural seismic design optimization and earthquake engineering: formulations and applications. IGI Publishing (IGI Global), pp. 232-268. ISBN 1466616407

Guades, Ernesto and Aravinthan, Thiru and Islam, Mainul and Manalo, Allan (2012) A review on the driving performance of FRP composite piles. Composite Structures, 94 (6). pp. 1932-1942. ISSN 0263-8223

Jensen, T. A. and Baillie, C. and Bramley, R. G. V. and Panitz, J. H. (2012) An assessment of sugarcane yield monitoring concepts and techniques from commercial yield monitoring systems. In: 34th Annual Conference of the Australian Society of Sugar Cane Technologists (ASSCT 2012), 1-4 May 2012, Cairns, Australia.

Bramley, R. G. V. and Panitz, J. H. and Jensen, T. A. and Baillie, C. P. (2012) Within block spatial variation in CCS: another potentially important consideration in the application of precision agriculture to sugarcane production. In: 34th Annual Conference of the Australian Society of Sugar Cane Technologists (ASSCT 2012), 1-4 May 2012, Cairns, Australia.

Long, Hang and Xiang, Wei and Shen, Shanshan and Zhang, Yueying and Zheng, Kan and Wang, Wenbo (2012) Analysis of conditional error rate and combining schemes in HARQ. IEEE Transactions on Signal Processing, 60 (5). pp. 2677-2682. ISSN 1053-587X

Cardona, Francisco (2012) Bio-resins: new structural renewable materials for bio-composite applications. In: 4th KKU International Engineering Conference: Driving Together Towards ASEAN Economic Community (KKU-IENC 2012) , 10-12 May 2012, Khon Kaen University, Thailand.

Simmons, Shane (2012) Comparison of the structures and core competencies of tertiary surveying programs in New South Wales with the University of Southern Queensland and the introduction of a new major at USQ. Azimuth . ISSN 0728-4586

Choy, Y. S. and Liu, Y. and Cheung, H. Y. and Xi, Q. and Lau, K. T. (2012) Development of composite plate for compact silencer design. Journal of Sound and Vibration, 331 (10). pp. 2348-2364. ISSN 0022-460X

Wang, Yafeng and Wang, Zhuo and Xiang, Wei (2012) Distributed queue information based scheduling scheme for relay systems with wireless backhaul link. Advanced Science Letters, 11 (1). pp. 253-257. ISSN 1936-6612

Zhang, Z. and Wang, H. and Yao, X. and Zhu, Y. (2012) Effects of halloysite in kaolin on the formation and properties of geopolymers. Cement and Concrete Composites, 34 (5). pp. 709-715. ISSN 0958-9465

Goh, Steven and Coaker, Warren and Bullen, Frank (2012) How engineers become CEOs. In: Engineering Leadership Conference (ELC 2012): Passing the Baton - Engineering Australia's Future, 30 May-2 Jun 2012, Adelaide, Australia.

Wang, Yafeng and Ding, Wenbo and Xiang, Wei (2012) Influence of beamforming on interference distribution of wireless network. Advanced Science Letters, 11 (1). pp. 148-153. ISSN 1936-6612

Agrira, Abdalla Ibrahim Abuniran (2012) Internal combustion engine heat transfer-transient thermal analysis. [Thesis (_PhD/Research)] (Unpublished)

Goh, Steven and Baker, Nelson (2012) Need for a global accord for the postgraduate learning of engineers. In: 13th IACEE World Conference on Continuing Engineering Education (WCCEE 2012), 17-19 May 2012, Valencia, Spain.

Paudyal, Dev Raj and McDougall, Kevin and Apan, Armando (2012) Spatially enablement of NRM communities through spatial knowledge and information network development. In: Rajabifard, Abbas and Coleman, David, (eds.) Spatially enabling government, industry and citizens: research and development perspectives. GSDI Association Press, Needham, MA, United States, pp. 81-102. ISBN 978-0-9852444-0-8

Buttsworth, David and Jacobs, Peter and Potter, Daniel and Mudford, Neil and D'Souza, Mary and Eichmann, Troy and Jenniskens, Peter and McIntyre, Tim and Jokic, Michael and Jacobs, Carolyn and Upcroft, Ben and Khan, Razmi and Porat, Hadas and Neely, Andrew and Lohle, Stefan (2012) Super-orbital re-entry in Australia: laboratory measurement, simulation and flight observation [Keynote lecture]. In: ISSW28: 28th International Symposium on Shock Waves, 17-22 Jul 2011, Manchester, United Kingdom.

Mossad, R. and AL-Khaffajy, M. (2012) Investigating two configurations of a heat exchanger in an Indirect Heating Integrated Collector Storage Solar Water Heating System (IHICSSWHS). Renewable Energy and Power Quality Journal (10). pp. 1-6. ISSN 2172-038X

Aravinthan, Vasantha and Ho, Goen and Gray, Julian and Butler, Reid and Connell, Damien (2012) What are smart meters? Water, 39 (2). pp. 80-84. ISSN 0310-0367

Aravinthan, Vasantha and Ho, Goen and Gray, Julian and Butler, Reid and Connell, Damien (2012) What are smart meters? [Fact Sheet]. Australian Water Association, Sydney, Australia.

Manalo, A. C. and Aravinthan, T. and Mutsuyoshi, H. and Matsui, T. (2012) Composite behaviour of a hybrid FRP bridge girder and concrete deck. Advances in Structural Engineering, 15 (4). pp. 589-600. ISSN 1369-4332

Goh, Steven and Worden, John and Zhou, Hong and Clewett, John (2012) Growing pains in the revitalisation of a 2nd level engineering and spatial science PBL course. In: Rasul, Mohammad, (ed.) Developments in engineering education standards: advanced curriculum innovations. IGI Global, Hershey, PA. United States , pp. 105-126. ISBN 978-1-4666-0951-8

Wilson, Wayne and Basson, Marita (2012) Housing affordability in Roma: can progress be made within the regulatory and policy framework? In: Planning Institute of Australia National Congress 2012, 29 Apr - 2 May 2012, Adelaide, Australia.

Basson, Marita and Basson, Manus (2012) Mining – godsend or manmade disaster in the eyes of rural communities? In: Planning Institute of Australia National Congress 2012, 29 Apr - 2 May 2012, Adelaide, Australia.

Abeysekera, Vasantha (2012) Mortar consumption characteristics of ‘brickwork’ and a framework for managing brick and mortar walls in chaotic environments. Engineer, XXXXV (02). pp. 49-64. ISSN 1800-1122

Yousif, B. F. and Ku, H. (2012) Suitability of using coir fiber/polymeric composite for the design of liquid storage tanks. Materials and Design, 36 . pp. 847-853. ISSN 0264-1275

Sharifian, Ahmad (2012) The effect of wind speed on the performance of a split chimney. In: 2012 International Conference on Fluid Dynamics and Thermodynamics Technologies (FDTT 2012), 17-18 March 2012, Singapore.

Al-Atresh, Safia and Sharifian, Ahmad and Kueger, Bradley (2012) Using a split chimney for dilution of exhaust pollution: a CFD approach. In: 2012 International Conference on Fluid Dynamics and Thermodynamics Technologies (FDTT 2012), 17-18 March 2012, Singapore.

Leis, J. and Martin, P. and Buttsworth, D. (2012) Simplified digital lock-in amplifier algorithm. Electronics Letters, 48 (5). pp. 259-261. ISSN 0013-5194

Ma, Xing and Mills, Julie E. and Brown, Graham and Zhuge, Yan (2012) A force method model for static analysis of transmission line system subjected to in-plane and out-of-plane loadings. In: ICTAS 2011: 4th International Conference on Technology of Architecture and Structure, 22-24 Sep 2011, Xi'an, China.

Chang, Cheng and Hou, Youghong and Xiang, Wei (2012) A novel relay scheme for the asymmetry multiple access relay channel. Journal of Nanoelectronics and Optoelectronics, 7 (2). pp. 209-215. ISSN 1555-130X

Ho, Mei-po and Lau, Kin-tak (2012) Design of an impact resistant glass fibre/epoxy composites using short silk fibres. Materials and Design, 35 (1). pp. 664-669. ISSN 0261-3069

Wong, Kwok Yeung Peter (2012) Measurement of mechanical, electrical and thermal properties of glass powder reinforced epoxy composites and modelling. [Thesis (_PhD/Research)] (Unpublished)

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. and Aravinthan, T. (2012) Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites. Composites Part B: Engineering, 43 (2). pp. 159-169. ISSN 1359-8368

Gibbings, Peter D. and Brodie, Lyn M. (2012) The importance of focal awareness to learning in virtual communities. In: Li, Honglei, (ed.) Virtual community participation and motivation: cross-disciplinary theories. Information Science Reference (IGI Global), Hershey, PA. United States, pp. 177-191. ISBN 978-1-4666-0312-7

Ku, H. and Fulcher, R. (2012) Using computer software packages to enhance the teaching in engineering management science: part 2 - programming techniques. Computer Applications in Engineering Education, 20 ( 1). pp. 114-123. ISSN 1099-0542

Raine, Steven (2012) Using treated CSG water for irrigation in the Surat Basin: opportunity or threat? Queensland Mining and Energy Bulletin, Autumn 2012 . pp. 36-39.

Nawi, Nazmi Mat and Jensen, Troy and Chen, Guangnan (2012) The application of spectroscopic methods to predict sugarcane quality based on stalk cross-sectional scanning. American Society of Sugar Cane Technologists Journal, 32 . pp. 16-27. ISSN 1075-6302

Parameswaran, Vinod and Zhou, Hong and Zhang, Zhongwei (2012) Irrigation control using wireless underground sensor networks. In: 6th International Conference on Sensing Technology (ICST 2012), 18-21 Dec 2012, Kolkata, India.

Tran, Canh-Dung and Tran-Cong, Thanh and Le-Cao, K. and Ho-Minh, D. (2012) Processing the CNTs' interaction in web using an electro-static field based process. In: 2012 International Conference on Nanoscience and Nanotechnology (ICONN 2012), 5-9 Feb 2012, Perth, Australia .

Manalo, Allan C. and Aravinthan, Thiru (2012) Mechanical behaviour of a new type of fibre composite railway sleeper. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Karu (2012) Prediction of the flexural behavior of fibre composite sandwich beams. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Aravinthan, Thiru (2012) Research and development of fibre composites in civil infrastructure - the Australian experience [Keynote address]. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Guades, Ernesto J. and Aravinthan, Thiru and Islam, Md. Mainul and Manalo, Allan C. (2012) Stiffness of FRP pultruded tubes under repeated axial impacts. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Al-Juboori, Raed A. and Yusaf, Talal and Aravinthan, Vasanthadevi (2012) Investigating the efficiency of thermosonication for controlling biofouling in batch membrane systems. Desalination, 286 . pp. 349-357. ISSN 0011-9164

Manalo, Allan and Mutsuyoshi, Hiroshi (2012) Behavior of fiber-reinforced composite beams with mechanical joints. Journal of Composite Materials, 46 (4). pp. 483-496. ISSN 0021-9983

Padhi, J. and Misra, R. K. and Payero, J. O. (2012) Estimation of soil water deficit in an irrigated cotton field with infrared thermography. Field Crops Research, 126 (1). pp. 45-55. ISSN 0378-4290

Long, Hang and Kim, Kyeong Jin and Xiang, Wei and Shen, Shanshan and Zheng, Kan and Wang, Wenbo (2012) Improved wideband precoding with arbitrary subcarrier grouping in MIMO-OFDM systems. ETRI Journal, 34 (1). pp. 9-16. ISSN 1225-6463

Ngo-Cong, Duc (2012) Integrated radial basis function methods for structural, fluid flow and fluid-structure interaction analyses. [Thesis (_PhD/Research)] (Unpublished)

Cardona, Francisco and Lau, Alan Kin-Tak and Fedrigo, Jessica (2012) Novel phenolic resins with improved mechanical and toughness properties. Journal of Applied Polymer Science, 123 (4). pp. 2131-2139. ISSN 0021-8995

Awad, Ziad K. and Yusaf, Talal (2012) Fibre composite railway sleeper design by using FE approach and optimization techniques. Structural Engineering and Mechanics, 41 (2). pp. 231-242. ISSN 1225-4568

Amir, Al-Falahi and Yusoff, M. Z. and Yusaf, Talal and Ahmed, Diyar I. (2012) Numerical investigation of flow instability in shock tube due to shock wave-contact surface interactions. International Journal of Numerical Methods for Heat and Fluid Flow, 22 (3). pp. 377-398. ISSN 0961-5539

Zhang, Zhenyu and Liu, Xiaoye and Peterson, Jim and Wright, Wendy (2012) Terrain and canopy surface modelling from LiDAR data for tree species classification. In: Symposium GIS Ostrava 2012: Surface Models for Geosciences, 23-25 Jan 2012, Ostrava, Czech Republic.

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Stevens, Nick (2012) Analysis of a typical railway turnout sleeper system using grillage beam analogy. Finite Elements in Analysis and Design, 48 (1). 1376-1391 . ISSN 0168-874X

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2012) A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials and Design, 33 (1). pp. 534-544. ISSN 0264-1275

Ku, H. and Wong, P. (2012) Contrast on tensile and flexural properties of glass powder reinforced epoxy composites: pilot study. Journal of Applied Polymer Science, 123 (1). pp. 152-161. ISSN 0021-8995

Lostroh, Tristan (2012) Investigation into the strength of Lego Technic liftarms and brick beams, and of liftarm pin connections. Project Report. Unpublished, Toowoomba. (Unpublished)

Islam, Md Mainul and Kim, Ho Sung (2012) Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior. Journal of Sandwich Structures and Materials, 14 (1). pp. 111-127. ISSN 1099-6362

White, Jodie A. and Ryley, Malcolm J. and George, Doug L. and Kong, Gary A. and White, Simon C. (2012) Yield losses in grain sorghum due to rust infection. Australasian Plant Pathology, 41 (1). pp. 85-91. ISSN 0815-3191

Tran, C.-D. and Mai-Duy, N. and Le-Cao, K. and Tran-Cong, T. (2012) A continuum-microscopic method based on IRBFs and control volume scheme for viscoelastic fluid flows. CMES: Computer Modeling in Engineering and Sciences, 85 (6). pp. 499-519. ISSN 1526-1492

Albdiry, M. T. and Yousif, B. F. and Ku, H. and Lau, K. T. (2012) A critical review on the manufacturing processes in relation to the properties of nanoclay/polymer composites. Journal of Composite Materials . ISSN 0021-9983 (In Press)

Thai-Quang, N. and Le-Cao, K. and Mai-Duy, N. and Tran-Cong, T. (2012) A high-order compact local integrated-RBF scheme for steady-state incompressible viscous flows in the primitive variables. CMES: Computer Modeling in Engineering and Sciences, 84 (6). pp. 528-557. ISSN 1526-1492

Wang, Chao and Zheng, Kan and Xiang, Wei and Long, Hang (2012) A new queue-status resource allocation scheme for backhaul link in relay enhanced networks. In: 2012 IEEE Wireless Communications and Networking Conference (WCNC 2012) , 1-4 Apr 2012, Paris, France.

Kumar, Suman S. P. and Anand, S. Vijay and SriHarsha, V. and Patel, Keyurkumar J. (2012) A novel extendible framework to efficiently access remote home equipments on an IMS based MobileTerminal. In: 11th Annual Wireless Telecommunications Symposium (WTS 2012), 18-20 Apr 2012, London, UK.

Liu, Fei and Xiang, Wei and Zhao, Hui and Zheng, Kan and Long, Hang (2012) A novel scheduling scheme for finite buffer service in time-varying channels. In: 14th IEEE International Conference on Communication Technology (ICCT 2012), 9-11 Nov 2012, Chengdu; China.

Ni, Chunya and Hou, Chunping and Xiang, Wei (2012) A novel UEP scheme based upon rateless codes. In: 2012 IEEE Wireless Communications and Networking Conference (WCNC 2012) , 1-4 Apr 2012, Paris, France.

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2012) A numerical procedure based on 1D-IRBFN and local MLS-1D-IRBFN methods for fluid-structure interaction analysis. CMES: Computer Modeling in Engineering and Sciences, 83 (5). pp. 459-498. ISSN 1526-1492

Thai-Quang, Nha and Mai-Duy, Nam and Tran-Cong, Thanh (2012) A numerical study of integrated radial-basis-functions for the pressure-velocity formulation. In: 7th ICCES Special Symposium on Meshless & Other Novel Computational Methods (ICCES MM 2011), 6-10 Sept 2011, Zonguldak, Turkey.

Goh, Steven Chingnam (2012) A qualitative study into the innovation and technology transfer process of a micro-manufacturer within a university-industry collaboration context in regional South-East Queensland. [Thesis (_PhD/Research)] (Unpublished)

Ho, Mei-po and Wang, Hao and Ho, Chun-kit and Lau, Kin-tak (2012) A study on the dynamic mechanical properties of silk fibre composites. Advanced Materials Research, 410 . pp. 106-109. ISSN 1022-6680

McDougall, Kevin (2012) An assessment of the contribution of volunteered geographic information during recent natural disasters. In: Rajabifard, Abbas and Coleman, David, (eds.) Spatially enabling government, industry and citizens: research and development perspectives. GSDI Association Press, Needham, MA, United States, pp. 201-214. ISBN 978-0-9852444-0-8

Majumder, Santanu and Nath, Bibhash and Sarkar, Simita and Islam, Sk. Mijanul and Bundschuh, Jochen and Chatterjee, Debashis and Hidalgo, Manuela (2012) Application of natural citric acid sources and their role on arsenic removal from drinking water: a green chemistry approach. Journal of Hazardous Materials . ISSN 0304-3894 (In Press)

Simpson, John Stanley (2012) Applied research on on-site and small community wastewater treatment and effluent disposal in Australasia. [Thesis (_PhD/Research)] (Unpublished)

Islam, A. B. M. R. and Maity, Jyoti Prakash and Bundschuh, Jochen and Chen, Chien-Yen and Bhowmik, Bejon Kumar and Tazaki, Kazue (2012) Arsenic mineral dissolution and possible mobilization in mineral-microbe-groundwater environment. Journal of Hazardous Materials . ISSN 0304-3894 (In Press)

Bhowmick, Subhamoy and Nath, Bibhash and Halder, Dipti and Biswas, Ashis and Majumder, Santanu and Mondal, Priyanka and Chakraborty, Sudipta and Nriagu, Jerome and Bhattacharya, Prosun and Iglesias, Monica and Roman-Ross, Gabriela and Guha Mazumder, Debendranath and Bundschuh, Jochen and Chatterjee, Debashis (2012) Arsenic mobilization in the aquifers of three physiographic settings of West Bengal, India: understanding geogenic and anthropogenic influences. Journal of Hazardous Materials . ISSN 0304-3894 (In Press)

Guilherme, L. R. G. and Toujaguez, R. and Ono, F. B. and Martins, V. and Cabrera, P. P. and Blanco, A. V. and Bundschuh, J. (2012) Arsenic speciation and bioaccessibility in gold mining tailings, Cuba. In: 4th International Congress on Arsenic in the Environment: Understanding the Geological and Medical Interface of Arsenic (AS 2012), 22-27 Jul 2012, Cairns, Australia.

Kiani, Mostafa Kiani Deh and Ghobadian, Barat and Ommi, Fathollah and Najafi, Gholamhassan and Yusaf, Talal (2012) Artificial neural networks approach for the prediction of thermal balance of SI engine using ethanol-gasoline blends. In: 2012 International Cross-Domain Conference and Workshop on Availability, Reliability, and Security (CD-ARES 2012), 20-24 Aug 2012, Prague, Czech Republic.

Lau, Mei-ling and Lau, Kin-tak and Ku, Harry and Bahattacharyya, Debes and Lee, Joong-Hee (2012) Assessing heat-treatment effects on bovine cortical bones by nanoindentation. In: PFAM 20: 20th International Symposium on Processing and Fabrication of Advanced Materials , 15-18 Dec 2011, Hong Kong.

Alarcon-Herrera, Maria Teresa and Bundschuh, Jochen and Nath, Bibhash and Nicolli, Hugo B. and Gutierrez, Melida and Reyes-Gomez, Victor M. and Nunez, Daniel and Martin-Dominguez, Ignacio R. and Sracek, Ondra (2012) Co-occurrence of arsenic and fluoride in groundwater of semi-arid regions in Latin America: genesis, mobility and remediation. Journal of Hazardous Materials . ISSN 0304-3894 (In Press)

Brodie, I. M. and Hellyer, L. (2012) Comparison of plagiarism rates between oncampus and offcampus engineering hydrology students. In: 40th SEFI Annual Conference: Engineering Education 2020: Meet the Future (SEFI 2012), 23-26 Sept 2012, Thessaloniki, Greece.

Kabir, Mohammad Mazedul and Wang, Hao and Lau, Alan and Cardona, Francisco and Aravinthan, Thiru (2012) Compressive properties of chemically-treated hemp fibre reinforced composites. In: Composites Australia and CRC-ACS, 2012 Conference: Diversity in Composite, 15-16 Mar 2012, Leura, Australia.

Sirimanna, Chamila Sampath and Lokuge, Weena and Islam, Md Mainul and Aravinthan, Thiru (2012) Compressive strength characterization of polyester based fillers. In: PFAM 20: 20th International Symposium on Processing and Fabrication of Advanced Materials, 15-18 Dec 2011, Hong Kong.

Long, Hang and Xiang, Wei and Wang, Jing and Zhang, Yueying and Liu, Yuanan and Wang, Wenbo (2012) Conditional error rate and combining schemes for hybrid automatic repeat request with M-pulse amplitude modulation. International Journal of Communication Systems . ISSN 1074-5351 (In Press)

Ho, Mei-po and Wang, Hao and Lee, Joong-Hee and Ho, Chun-kit and Lau, Kin-tak and Leng, Jinsong and Hui, David (2012) Critical factors on manufacturing processes of natural fibre composites. Composites Part B: Engineering, 43 (8). pp. 3549-3562. ISSN 1359-8368

Crosthwaite, Caroline and Jolly, Lesley and Brodie, Lyn and Kavanagh, Lydia and Buys, Laurie and Turner, Jennifer (2012) Curriculum design and higher order skills: challenging assumptions. In: 5th International Conference: Innovation, Practice and Research in Engineering Education (EE 2012), 18-20 Sep 2012, Coventry, United Kingdom.

Yousif, B. F. (2012) Design of newly fabricated tribological machine for wear and frictional experiments under dry/wet condition. Materials and Design . ISSN 0261-3069 (In Press)

Patel, Keyurkumar Jayantibhai (2012) Design, development and implementation of innovative and pervasive applications using emerging communication technologies for highly mobile organisations. [Thesis (_PhD/Research)] (Unpublished)

Choy, Y. S. and Liu, Y. and Lau, K. T. (2012) Duct noise control by using very light composite plate. Advanced Materials Research, 410 . pp. 361-365. ISSN 1022-6680

Ho, Mei-po and Wang, Hao and Lau, Kin-tak (2012) Effect of degumming time on silkworm silk fibre for biodegradable polymer composites. Applied Surface Science, 258 (8). pp. 3948-3955. ISSN 0169-4332

Ho, Mei-Po and Wang, Hao and Lau, Kin-Tak and Leng, Jinsong (2012) Effect of silk fiber to the mechanical and thermal properties of its biodegradable composites. Journal of Applied Polymer Science . ISSN 0021-8995 (In Press)

Aldraho, Abdelnour and Kist, Alexander A. (2012) Enabling energy efficient and resilient networks using dynamic topologies. In: 2012 Sustainable Internet and ICT for Sustainability (SustainIT 2012), 4-5 Oct 2012, Pisa, Italy.

Hoque, M. A. and Aravinthan, V. (2012) Estimating bio-kinetics for nitrogen source oxidation processes using online measurements in activated sludge. Journal of Environmental Technology and Construction Engineering, 1 (1). pp. 53-65. ISSN 2226-2725

Al-lwayzy, Saddam H. and Yusaf, Talal and Jensen, Troy (2012) Evaluating tractor performance and exhaust gas emissions using biodiesel from cotton seed oil. IOP Conference Series: Materials Science and Engineering, 36 (1). pp. 442-452. ISSN 1757-899X

Kist, Alexander A. and Maxwell, Andrew Douglas and Gibbings, Peter D. (2012) Expanding the concept of remote access laboratories. In: 2012 ASEE Annual Conference & Exposition: Spurring Big Ideas in Education (ASEE 2012), 10-13 Jun 2012, San Antonio, TX. United States.

Devine, J. (2012) Exploring Bourdieu for engineering education research. In: 40th SEFI Annual Conference: Engineering Education 2020: Meet the Future (SEFI 2012), 23-26 Sept 2012, Thessaloniki, Greece.

Dias-Wanigasekera, Deepthi Jayatha (2012) Exploring changes in nitrate contamination in the coastal and hautere zone aquifers, Wellington, New Zealand. [Thesis (_PhD/Research)] (Unpublished)

Ku, H. and Wong, P. and Huang, J. and Fung, H. and Trada, M. (2012) Flexural properties of epoxy composites filled with glass powder: preliminary results. Advanced Material Research, 410 . pp. 309-312. ISSN 1022-6680

Ku, H. and Donald, M. and Cardona, F. and Trada, M. (2012) Flexural properties of sawdust-reinforced epoxy composites post-cured in microwaves. Journal of Composite Materials, 46 (22). pp. 2879-2890. ISSN 0021-9983

Ku, H. and Prajapati, M. and Trada, M. (2012) Fracture toughness of vinyl ester composites reinforced with sawdust and postcured in microwaves. International Journal of Microwave Science and Technology, 2012 (Article ID 152726). ISSN 1687-5826

Wang, Yafeng and Li, Meng and Xiang, Wei (2012) Graph based interference coordination for relay networks. Przeglad Elektrotechniczny (Electrical Review), 88 (1B). pp. 88-91. ISSN 0033-2097

Thai-Quang, N. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2012) High-order alternating direction implicit method based on compact integrated-RBF approximations for unsteady/steady convection-diffusion equations. CMES: Computer Modeling in Engineering and Sciences, 89 (3). pp. 189-220. ISSN 1526-1492

Nawi, N. M. and Yahya, A. and Chen, G. and Bockari-Gevao, S. M. and Maraseni, T. N. (2012) Human energy expenditure in lowland rice cultivation in Malaysia. Journal of Agricultural Safety and Health, 18 (1). pp. 45-56. ISSN 1074-7583

Al-Juboori, R. A. and Yusaf, T. F. (2012) Improving the performance of ultrasonic horn reactor for deactivating microorganisms in water. IOP Conference Series: Materials Science and Engineering, 36 (012037). ISSN 1757-899X

Awedat, A. M. and Raine, S. R. and Bennett, J. McL. and Misra, R. K. (2012) Influence of porosity and permeate suspended clay concentration on clay entrainment within a red ferrosol. In: 5th Joint Australian and New Zealand Soil Science Conference: Soil Solutions for Diverse Landscapes (SSA 2012), 2-7 Dec 2012, Hobart, Australia.

Kist, Alexander A. (2012) Internet access technology and the learning experience. In: 2012 ASEE Annual Conference & Exposition: Spurring Big Ideas in Education (ASEE 2012), 10-13 Jun 2012, San Antonio, TX,. United States.

Hussin, Manal and Zhuge, Yan and Bullen, Frank and Lokuge, Weena (2012) Investigation of some fundamental properties of permeable concrete. In: ICEMMA 2012: International Conference on Emerging Materials and Mechanics Applications , 5-6 Feb 2012, Hangzhou, China.

Liu, Chia-Chuan and Kar, Sandeep and Jean, Jiin-Shuh and Wang, Chung-Ho and Lee, Yao-Chang and Sracek, Ondra and Li, Zhaohui and Bundschuh, Jochen and Yang, Huai-Jen and Chen, Chien-Yen (2012) Linking geochemical processes in mud volcanoes with arsenic mobilization driven by organic matter. Journal of Hazardous Materials . ISSN 0304-3894 (In Press)

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2012) Local moving least square - one-dimensional IRBFN technique: part 1 - natural convection flows in concentric and eccentric annuli. CMES: Computer Modeling in Engineering and Sciences, 83 (3). pp. 275-310. ISSN 1526-1492

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2012) Local moving least square - one-dimensional IRBFN technique: part 11 - unsteady incompressible viscous flows. CMES: Computer Modeling in Engineering and Sciences , 83 (3). pp. 311-351. ISSN 1526-1492

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2012) Local moving least square-one-dimensional integrated radial basis function networks technique for incompressible viscous flows. International Journal for Numerical Methods in Fluids, 70 . pp. 1443-1474. ISSN 0271-2091

Crosthwaite, C. and Jolly, L. and Brodie, L. and Kavanagh, L. and Buys, L. (2012) Making principled decisions about curriculum development: outcomes of a realist evaluation across 13 universities. In: 40th SEFI Annual Conference: Engineering Education 2020: Meet the Future (SEFI 2012), 23-26 Sept 2012, Thessaloniki, Greece.

Uddin, Md. Jasim (2012) Measurements of evaporation during sprinkler irrigation. [Thesis (_PhD/Research)] (Unpublished)

Lau, Mei-Ling and Lau, Kin-Tak and Ku, Harry and Bahattacharyya, Debes and Yao, Yan-Dong (2012) Measurements of heat treatment effects on bovine cortical bones by nanoindentation and compression testing. Journal of Biomaterials and Nanobiotechnology, 3 (1). pp. 105-113. ISSN 2158-7027

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2012) Mechanical properties characterization of the skin and core of a novel composite sandwich structure. Journal of Composite Materials . ISSN 0021-9983 (In Press)

Ho, M. P. and Wang, H. and Lau, K. T. and Jayaraman, K. and Bhattacharyya, D. (2012) Mechanical properties of a bamboo charcoal reinforced polylactic acid composite. In: 8th Asian-Australasian Conference on Composite Materials: Enabling Tomorrow's Industry Toda (ACCM 8), 6-8 Nov 2012, Kuala Lumpur, Malaysia.

An-Vo, D.-A and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2012) Modeling strain localisation in a segmented bar by a C2-continuous two-node integrated-RBF element formulation. In: 34th International Conference on Boundary Elements and other Mesh Reduction Methods (BEM/MRM 2012), 25-27 June 2012, Split, Croatia.

Ku, H. and Zhou, Hong and Wong, Peter and Su, Gang and Vadher, Jayent (2012) Modeling the flexural properties of SLG reinforced phenol formaldehyde composites using Langrage’s Method. Advanced Materials Research, 410 . pp. 305-308. ISSN 1022-6680

Albdiry, M. T. and Yousif, B. F. (2012) Morphological structures and tribological performance of unsaturated polyester based untreated/silane-treated halloysite nanotubes. Materials and Design . ISSN 0264-1275 (In Press)

Buttsworth, David and Jacobs, P. and Morgan, R. G. and Jenniskens, Peter (2012) Near ultraviolet emission spectroscopy of the Hayabusa re-entry. In: 50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition (AIAA 2012): Advancing the Science of Flight Technology, 9-12 Jan 2012, Nashville, TN. United States.

Kist, Alexander A. and Maxwell, Andrew D. (2012) Network performance and quality of experience of remote access laboratories. International Journal of Online Engineering , 8 (4). pp. 50-57. ISSN 1868-1646

Hafizi, Z. M. and Epaarachchi, J. and Nizwan, C. K. E. and Lau, K. T. (2012) Non-velocity based analysis of passive ultrasonic signal for source lLocation detection in composite plates: a pilot study. IOP Conference Series: Materials Science and Engineering, 36 (1). ISSN 1757-8981

Awad, Ziad Khalaf (2012) Novel fibre composite civil engineering sandwich structures: behaviour, analysis, and optimum design. [Thesis (_PhD/Research)] (Unpublished)

Al-Khaffajy, Marwaan Awad Hamad (2012) Numerical evaluation of the performance of an indirect heating integrated collector storage solar water heating system. [Thesis (_PhD/Research)] (Unpublished)

Shahid, Salman and Wen, Peng and Ahfock, Tony (2012) Numerical investigation of white matter anisotropic conductivity in defining current distribution under tDCS. Computer Methods and Programs in Biomedicine . ISSN 0169-2607 (In Press)

Tran, C.-D. and Mai-Duy, N. and Tran-Cong, T. (2012) Numerical solution of Fokker-Planck equation using the integral radial basis function networks. In: 10th World Congress on Computational Mechanics (WCCM 2012), 8-13 July 2012, Sao Paulo, Brazil.

Kist, Alexander A. and Maxwell, Andrew (2012) Performance and quality of experience of remote access laboratories. In: IEEE International Conference on Teaching, Assessment, and Learning for Engineering (TALE 2012): Fostering Innovation and Excellence in Engineering Education, 20-23 Aug 2012, Hong Kong, China.

Grabham, Michael Kevin (2012) Performance evaluation and improvement of bankless channel surface irrigation systems. [Thesis (_PhD/Research)] (Unpublished)

Aldraho, Abdelnour and Kist, Alexander A. and Maxwell, Andrew (2012) Performance investigation of dynamic topologies in MPLS networks. In: International Symposium on Communications and Information Technologies (ISCIT), 2-5 Oct 2012, Gold Coast, Australia.

He, J. and McHugh, A. D. and Li, H. W. and Wang, Q. J. and Li, W. Y. and Rasaily, R. G. and Li, H. (2012) Permanent raised beds improved soil structure and yield of spring wheat in arid north-western China. Soil Use and Management . ISSN 0266-0032 (In Press)

Taylor, B. A. (2012) Predicting normalised monthly patterns of domestic external water demand using rainfall and temperature data. Water Science and Technology: Water supply, 12 (2). pp. 168-178. ISSN 1606-9749

Banhazi, Thomas M. (2012) Quantification of environmental conditions in Australian livestock buildings. In: 9th International Livestock Environment Symposium (ILES 2012): Agriculture and Engineering for a Healthier Life, 8-12 Jul 2012, Valencia, Spain.

An-Vo, D.-A. and Tran, C.-D. and Mai-Duy, N. and Tran-Cong, T. (2012) RBF computation of multiscale elliptic problems [Keynote paper]. In: 8th ICCES Special Symposium on Meshless & Other Novel Computational Methods (ICCES MM 2012), 2-6 Sep 2012, Budva, Montenegro.

An-Vo, D.-A. and Tran, C.-D. and Mai-Duy, N. and Tran-Cong, T. (2012) RBF-based multiscale control volume method for second order elliptic problems with oscillatory coefficients. CMES: Computer Modeling in Engineering and Sciences, 89 (4). pp. 303-359. ISSN 1526-1492

Cardona, Francisco and Tawfik, Qaidar H. and Karunasena, Karu (2012) Reinforcement of corroded steel structures with CFRP panels. In: ICACE 2012: International Conference on Architectural and Civil Engineering, 24-25 Oct 2012, Bali, Indonesia.

Guades, Ernesto and Aravinthan, Thiru (2012) Residual properties of square FRP composite tubes subjected to repeated axial impact. Composite Structures . ISSN 0263-8223 (In Press)

Ku, Harry S. (2012) Review on using packages to enhance the teaching of critical path networks. In: 2012 International MultiConference of Engineers and Computer Scientists (IMECS 2012), 14-16 Mar 2012, Hong Kong, China.

Xie, Shuisheng and Li, Xinggang and Wang, Hao and Zhang, Ying (2012) Semisolid processing technology. Metallurgical Industry Press, Beijing, China. ISBN 978-7-5024-5935-2

Hoang-Trieu, T. -T and Mai-Duy, N. and Tran-Cong, T. (2012) Several compact local stencils based on integrated RBFs for fourth-order ODEs and PDEs. CMES: Computer Modeling in Engineering and Sciences, 84 (2). pp. 171-203. ISSN 1526-1492

Ho-Minh, D. and Mai-Duy, N. and Tran-Cong, T. (2012) Simulation of viscous and viscoelastic flows using a RBF-Galerkin approach. Australian Journal of Mechanical Engineering , 9 (2). pp. 101-112. ISSN 1448-4846

Tarawneh, Mou’ad A. and Ahmad, Sahrim Hj. and EhNoum, SeYong and Lau, Kin-tak (2012) Sonication effect on the mechanical properties of MWCNTs reinforced natural rubber. Journal of Composite Materials . ISSN 0021-9983 (In Press)

Ramos Ramos, Oswaldo Eduardo and Cáceres, Luis Fernando and Ormachea Muñoz, Mauricio Rodolfo and Bhattacharya, Prosun and Quino, Israel and Quintanilla, Jorge and Sracek, Ondra and Bundschuh, Jochen and García, Maria Eugenia (2012) Sources and behavior of arsenic and trace elements in groundwater and surface water in the Poopó Lake Basin, Bolivian Altiplano. Environmental Earth Sciences, 66 (3). pp. 793-807. ISSN 1866-6280

Brodie, Ian M. (2012) SSUIS – a research model for predicting suspended solids loads in stormwater runoff from urban impervious surfaces. Water Science and Technology, 65 (12). pp. 2140-2147. ISSN 0273-1223

Brodie, I. (2012) Stormwater harvesting and WSUD frequent flow management: a compatibility analysis. Water Science and Technology, 66 (3). pp. 612-619. ISSN 0273-1223

Brodie, Ian M. (2012) Stormwater reuse treatment requirements and screening-level risk assessment at two urban spatial scales. Journal of Water Reuse and Desalination, 2 (1). pp. 13-21. ISSN 2220-1319

Trada, M. and Mandava, J. and Ku, H. and Yousif, B. (2012) Tensile properties of bagasse reinforced epoxy composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today , 6-8 Nov 2012 , Kuala Lumpur, Malaysia .

Bennett, J. McL. and Cattle, S. R. and Singh, B. (2012) The effects of lime, gypsum and lime/gypsum combinations, after 2.5 years, on two sodic soils under dryland cropping conditions in the Macquarie Valley, NSW. In: 5th Joint Australian and New Zealand Soil Science Conference: Soil Solutions for Diverse Landscapes (SSA 2012), 2-7 Dec 2012, Hobart, Australia.

Abdulla, Shahab A. and Wen, Peng (2012) The effects of time-delay on feedback control of depth of anesthesia. In: 2012 IEEE-EMBS International Conference on Biomedical and Health Informatics: Global Grand Challenge of Health Informatics (BHI 2012), 2-7 Jan 2012, Hong Kong and Shenzhen, China.

Awedat, A. M. and Bennett, J. McL. and Raine, S. R. and Misra, R. K. (2012) The impact of rain water on soil pore networks following irrigation with saline-sodic water. In: 5th Joint Australian and New Zealand Soil Science Conference: Soil Solutions for Diverse Landscapes (SSA 2012), 2-7 Dec 2012, Hobart, Australia.

Amirruddin, A. K. and Noor, M. M. and Kadirgama, K. and Sharma, K. V. (2012) The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP). In: 3rd International Conference on Management of Natural Resources, Sustainable Development and Ecological Hazards: Ravage of the Planet III (RAV 2011) , 13-15 Dec 2011, Selangor, Malaysia.

Bennett, J. McL. and Cattle, S. R. (2012) The role of landholder education in adoption of soil health management systems. In: 5th Joint Australian and New Zealand Soil Science Conference: Soil Solutions for Diverse Landscapes (SSA 2012), 2-7 Dec 2012, Hobart, Australia.

Bennett, J. McL. and Raine, S. R. (2012) The soil specific nature of threshold electrolyte concentration analysis. In: 5th Joint Australian and New Zealand Soil Science Conference: Soil Solutions for Diverse Landscapes (SSA 2012), 2-7 Dec 2012, Hobart, Australia.

Albdiry, M. T. and Almosawi, A. I. and Yousif, B. F. (2012) The synergistic effect of hybrid flame retardants on pyrolysis behaviour of hybrid composite materials. Journal of Engineering Science and Technology, 7 (3). pp. 351-359. ISSN 1823-4690

Ho, Mei-po and Wang, Hao and Lau, Kin-tak (2012) Thermal properties and structure conformation on silkworm silk fibre. In: Composites Australia and CRC-ACS, 2012 Conference: Diversity in Composite, 15-16 Mar 2012, Leura, Australia.

Ku, Harry and Cardona, Francisco and Jamal Eddine, Mustapha (2012) Thermal properties of calcium carbonate powder reinforced vinyl ester composites: pilot study. Journal of Applied Polymer Science . ISSN 0021-8995 (In Press)

Bennett, J. McL. and Raine, S. R. and Eberhard, F. (2012) Threshold electrolyte concentration relationships for soils from Macarthur River. Technical Report. National Centre for Engineering in Agriculture, Towoomba, Australia.

Bennett, J. McL. and Raine, S. R. and Eberhard, F. (2012) Threshold electrolyte concentration relationships for soils from Roma fields Roleen property. Technical Report. National Centre for Engineering in Agriculture, Towoomba, Australia.

Al-juboori, Raed Ahmed (2012) Ultrasound technology as a pre-treatment for biofouling control in reverse osmosis (RO) system. [Thesis (_PhD/Research)] (Unpublished)

Bowtell, Les and Moloney, Clint and Kist, Alexander A. and Parker, Victoria and Maxwell, Andrew and Reedy, Natasha (2012) Using remote access laboratories in nursing education. In: 9th International Conference on Remote Engineering and Virtual Instrumentation (REV 2012) , 4-6 June 2012, Bilbao, Spain.

Croft, Hayden and Chong, Albert and Wilson, Barry (2012) Virtual reality assessment of rugby lineout throw kinematics. Sports Technology, 4 (1-2). pp. 2-12. ISSN 1934-6182

McIntyre, T. J. and Khan, R. and Eichmann, T. N. and Upcroft, B. and Buttsworth, D. (2012) Visible and near infrared spectroscopy of Hayabusa re-entry using semi-autonomous tracking. In: 50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition: Advancing the Science of Flight Technology (AIAA 2012) , 9-12 Jan 2012, Nashville, TN. United States.

Dowling, D. G. and Hadgraft, R. G. (2012) What should we teach? Defining your discipline to drive curriculum renewal: an environmental engineering case study. In: 40th SEFI Annual Conference: Engineering Education 2020: Meet the Future (SEFI 2012), 23-26 Sept 2012, Thessaloniki, Greece.

2011

Hasna, A. M. (2011) Microwave processing applications in chemical engineering: cost analysis. Journal of Applied Sciences, 11 (21). pp. 3613-3618. ISSN 1812-5654

Liu, X. and Zhang, Z. and McDougall, K. (2011) Characteristic analysis of a flash flood-affected creek catchment using LiDAR-derived DEM. In: MODSIM2011: Sustaining Our Future: Understanding and Living with Uncertainty, 12-16 Dec 2011, Perth, Australia.

Zhang, Z. and Liu, X. and Peterson, J. and Wright, W. (2011) Statistical analysis of airborne LiDAR data for forest classification in the Strzelecki Ranges, Victoria, Australia. In: MODSIM 2011: Sustaining Our Future: Understanding and Living with Uncertainty, 12-16 Dec 2011, Perth, Australia.

Gibbings, Peter D. and Bullen, Frank (2011) Development and validation of a regional university’s model for community and industry engagement. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Salim, Omar Hazim and Xiang, Wei (2011) Prioritized 3-D video transmission over cooperative MIMO-OFDM systems. In: DICTA 2011: International Conference on Digital Image Computing: Techniques and Application, 6-8 Dec 2011, Noosa, Australia.

Leis, John and Buttsworth, David and Martin, Philip (2011) A broadband multisensor approach to gas monitoring. In: 6th Australian Conference on Laser Diagnostics in Fluid Mechanics and Combustion, 5-7 Dec 2011, Canberra, Australia.

Dowling, David and Hadgraft, Roger and Lamborn, Julia (2011) Developing an inclusive stakeholder consultation process: a case study. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Dowling, David (2011) Employer perspectives on engineering technician education in Australia. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Dowling, David and Godfrey, Elizabeth (2011) Engineering technician students: do they understand their future role? In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, WA.

Kamel, Fouad and Baguley, Margaret and Thorpe, David (2011) Enhanced graduate attributes by engaging engineering students in teaching episodes. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Maxwell, Andrew and Noble, Karen and Kist, Alexander A. and Fogarty, Roderick and Gibbings, Peter and Midgley, Warren (2011) Exploring a cross-disciplinary research initiative with remote access laboratories: robot RAL-ly as a stimulus for consideration of engineering pathway. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5–7 Dec 2011, Fremantle, Australia.

Noor, M. M. and Hairuddin, A. Aziz and Wandel, Andrew P. and Yusaf, T. F. (2011) Implementation of conditional moment closure using the Taylor expansion and finite differences. In: 1st International Conference of Mechanical Engineering Research (ICMER 2011), 5-8 Dec 2011, Kuantan, Malaysia.

Scarmana, Gabriel (2011) A contour-based approach to image compression. In: 2011 International Conference on Digital Image Computing: Techniques and Application (DICTA 2011), 6-8 Dec 2011, Noosa, Australia .

Mai-Duy, N. and Tran-Cong, T. (2011) A high-order upwind control-volume method based on integrated RBFs for fluid-flow problems. International Journal for Numerical Methods in Fluids, 67 (12). pp. 1973-1992. ISSN 0271-2091

Kumar, Nandini Ramesh and Xiang, Wei and Soar, Jeffrey (2011) A novel image compressive sensing method based on complex measurements. In: DICTA 2011: International Conference on Digital Image Computing: Techniques and Application, 6-8 Dec 2011 , Noosa, Australia.

Perera, Kithsiri and Apan, Armando and McDougall, Kevin and Samarakoon, Lal (2011) Applying the global standard FAO LCCS to map land cover of rural Queensland. Asian Journal of Geoinformatics, 11 (3). ISSN 1513-6728

Lau, Alan kin-tak (2011) Carbon nanotube-reinforced nanocomposites. In: Leng, Jinsong and Lau, Alan kin-tak, (eds.) Multifunctional polymer nanocomposites. Taylor & Francis (CRC Press), Boca Raton, FL. United States, pp. 19-45. ISBN 978-1-4398-1682-0

Zhang, Zhenyu and Liu, Xiaoye and Peterson, Jim and Wright, Wendy (2011) Cool temperate rainforest and adjacent forests classification using airborne LiDAR data. Area, 43 (4). pp. 438-448. ISSN 0004-0894

Brink, G. N. and Symes, T. W. and Hancock, N. H. (2011) Development of a smart monolayer application system for reducing evaporation from farm dams: introductory paper. Australian Journal of Multi-Disciplinary Engineering, 8 (2). pp. 121-130. ISSN 1448-8388

Albdiry, M. T. and Almosawi, A. I. (2011) Effect of compacting pressure on microstructure and mechanical properties of carbide cutting tools. Powder Metallurgy, 54 (5). pp. 585-591. ISSN 0032-5899

Aravinthan, Thiru and Lokuge, Weena and Manalo, Allan (2011) Effectiveness of formative online quizzes in learning and teaching a structural engineering course. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Mann, Llewellyn and Brodie, Lyn and Chang, Rosemary and Howard, Prue (2011) Engineering education research groups in Australia: implications for Australasian engineering educators. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Rao, G. Srinivasa and Sharma, K. V. and Chary, S. P. and Bakar, R. A. and Rahman, M. M. and Kadirgama, K. and Noor, M. M. (2011) Experimental study on heat transfer coefficient and friction factor of Al2O3 nanofluid in a packed bed column. Journal of Mechanical Engineering and Sciences, 1 (1). pp. 1-15.

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2011) Flexural strength of sandwich panel with lignocellulosic composites intermediate layer – a statistic approach. International Journal of Protective Structures, 2 (4). pp. 453-464. ISSN 2041-4196

Wandel, Andrew P. and Willey, Keith (2011) Peer review of teamwork for encouraging equal commitment to the group effort. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Devine, Jo and Jolly, Lesley (2011) Questions arising from the use of peer assisted learning as a technique to increase diverse participation in engineering education. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Padhi, J. and Misra, R. K. (2011) Sensitivity of EM38 in determining soil water distribution in an irrigated wheat field. Soil and Tillage Research, 117 . pp. 93-102. ISSN 0167-1987

Aravinthan, Thiru and Manalo, Allan (2011) Student performance in an online postgraduate course on fibre composites for civil engineers. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Jolly, Lesley and Crosthwaite, Caroline and Brodie, Lyn and Kavanagh, Lydia and Buys, Laurie (2011) The impact of curriculum content in fostering inclusive engineering: data from a national evaluation of the use of EWB projects in first year engineering. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics and Sustainability, 5-7 Dec 2011, Fremantle, Western Australia.

Rose, C. W. and Yu, B. and Misra, R. K. and Coughlan, K. and Fentie, B. (2011) Use of GUEST technology to parameterize a physically-based model for assessing soil erodibility and evaluating conservation practices in tropical steeplands. In: Morgan, R. P. C. and Nearing, M. A., (eds.) Handbook of erosion modelling. Wiley-Blackwell Publishing Ltd., Chichester, West Sussex. UK, pp. 195-222. ISBN 978-1-4051-9010-7

McCarthy, Alison (2011) NPSI/IAL travel fellowship 2010: site-specific irrigation control and sensing systems. Irrigation Australia , 26 (4). pp. 34-35. ISSN 0818-9447

Al-Baghdadi, Jasim Ahmed Ali and Chong, Albert K. and McDougall, Kevin and Alshadli, Duaa and Milburn, Peter and Newsham-West, Richard (2011) A dense surface modelling technique for foot surface imaging. In: 2011 Surveying and Spatial Sciences Conference: Innovation in Action: Working Smarter (SSSC 2011), 21-25 Nov 2011, Wellington, New Zealand.

Scarmana, Gabriel (2011) Compressing images using contours. In: 2011 Surveying and Spatial Sciences Conference: Innovation in Action: Working Smarter (SSSC 2011), 21-25 Nov 2011, Wellington, New Zealand.

Noor, M. M. and Wandel, Andrew P. and Yusaf, T. F. (2011) A hybrid EMST-modified Curl's model for turbulent combustion modelling. In: 2011 USQ Research Evening, 17 Nov 2011, Toowoomba, Australia.

Maestre-Valero, J. F. and Martínez-Alvarez, V. and Gallego-Elvira, B. and Pittaway, P. (2011) Effects of a suspended shade cloth cover on water quality of an agricultural reservoir for irrigation. Agricultural Water Management, 100 (1). pp. 70-75. ISSN 0378-3774

Cardona, F. and Fedrigo, J. (2011) Synthesis of elastomeric phenolic resins with improved toughness and flexibility. In: EUROTEC 2011: Inaugural European Technical Conference on Plastics, 14-15 Nov 2011, Barcelona, Spain.

Al-Khaffajy, M. and Mossad, R. (2011) Optimization of the air gap spacing in a solar water heater with double glass cover. In: 9th Australasian Heat and Mass Transfer Conference, 2-4 Nov 2011, Melbourne, Australia.

Kist, Alexander A. (2011) A framework to evaluate performance from an application and user perspective. In: ATNAC 2011: Australian Telecommunication Networks and Applications Conference, 9-11 Nov 2011, Melbourne, Australia.

Wandel, Andrew P. (2011) A stochastic micromixing model based on the turbulent diffusion length scale. In: Australian Combustion Symposium 2011 (ACS 2011), 29 Nov-1 Dec 2011, Newcastle, Australia.

Shiau, Jim and Al Abri, Mohammed (2011) A study on the failure mechanisms of horizontal plate anchors in clay. In: ICAGE 2011: International Conference on Advances in Geotechnical Engineering, 7-9 Nov 2011, Perth, Western Australia.

Peters, Renee (2011) Advanced analysis of shallow foundations located near slopes. [USQ Project] (Unpublished)

Banhazi, T. M. and Stott, P. and Rutley, D. and Blanes-Vidal, V. and Pitchford, W. (2011) Air exchanges and indoor carbon dioxide concentration in Australian pig buildings: effect of housing and management factors. Biosystems Engineering, 110 (3). pp. 272-279. ISSN 1537-5110

Shiba, Sipho S.T. and Apan, Armando (2011) Analysing the effect of drought on net primary productivity of tropical rainforests in Queensland using MODIS satellite imagery. In: 2011 Surveying and Spatial Sciences Conference: Innovation in Action: Working Smarter (SSSC 2011), 21-25 Nov 2011, Wellington, New Zealand.

Maraseni, Tek N. and Cockfield, Geoff and Apan, Armando (2011) Analysis of spacing for spotted gum plantations for maximizing merchantable logs' volume in Southeast Queensland, Australia. Journal of Sustainable Forestry, 30 (7). pp. 619-636. ISSN 1054-9811

Paudyal, Dev Raj and McDougall, Kevin and Apan, Armando (2011) Assessing spatial information access, use and sharing for catchment management in Australia. In: 2011 Surveying and Spatial Sciences Conference: Innovation in Action: Working Smarter (SSSC 2011), 21-25 Nov 2011, Wellington, New Zealand.

Simmons, Shane (2011) Boundary disputes - a clash of wills or a Shakespearean tragedy? Spatial Science Queensland . pp. 28-34.

Zhou, Yuan and Hou, Chunping and Xiang, Wei and Wu, Feng (2011) Channel distortion modeling for multi-view video transmission over packet-switched networks. IEEE Transactions on Circuits and Systems for Video Technology, 21 (11). pp. 1679-1692. ISSN 1051-8215

Kelly, C. and Leis, J. and Buttsworth, D. (2011) Development of a photo-acoustic trace gas sensor. In: Australian Acoustical Society Conference (AAS 2011), Acoustics 2011: Breaking New Ground, 2-4 Nov 2011, Gold Coast, Australia.

Liu, Liwi and Liu, Yanju and Leng, Jinsong and Lau, Kin-tak (2011) Electromechanical stability of compressible dielectric elastomer actuators. Smart Materials and Structures, 20 (11). p. 115015. ISSN 0964-1726

Aldraho, Abdelnour and Kist, Alexander A. (2011) Enabling dynamic topologies in communication networks. In: ATNAC 2011: Australian Telecommunication Networks and Applications Conference, 9-11 Nov 2011, Melbourne, Australia.

Apan, Armando and Baral, Govinda and Dunwoody, Ernest and Richardson, Lucy and McDougall, Kevin (2011) Evaluation of photo imaging methods for vegetation condition assessment. In: 2011 Surveying and Spatial Sciences Conference: Innovation in Action: Working Smarter (SSSC 2011), 21-25 Nov 2011, Wellington, New Zealand.

Chan, Mo-lin and Lau, Kin-tak and Wong, T. T. and Cardona, Francisco (2011) Interfacial bonding characteristic of nanoclay/polymer composites. Applied Surface Science, 258 (2). pp. 860-864. ISSN 0169-4332

Graham, Kim (2011) Local government greenhouse gas abatement reporting. [USQ Project] (Unpublished)

Huntley, Matthew and Liu, Xiaoye and McDougall, Kevin and Gibbings, Peter (2011) Mapping cycling pathways and route selection using GIS and GPS. In: 2011 Surveying and Spatial Sciences Conference: Innovation in Action: Working Smarter (SSSC 2011), 21-25 Nov 2011, Wellington, New Zealand.

Mandava, Jagan (2011) Mechanical behaviour of polymeric composition based on available natural fibres in Australia. [USQ Project] (Unpublished)

Hairuddin, A. Aziz and Yusaf, Talal F. and Wandel, Andrew P. (2011) Predicting the combustion behaviour of a diesel HCCI engine using a zero-dimensional single-zone model. In: Australian Combustion Symposium 2011 (ACS 2011), 29 Nov-1 Dec 2011, Newcastle, Australia.

Keogh, Diane U. and Apan, Armando and Mushtaq, Shahbaz and King, David and Thomas, Melanie (2011) Resilience, vulnerability and adaptive capacity of an inland rural town prone to flooding: a climate change adaptation case study of Charleville, Queensland, Australia. Natural Hazards, 59 (2). pp. 699-723. ISSN 0921-030X

Baral, Govinda Prasad and McDougall, Kevin and Chong, Albert (2011) Review of Australian land use mapping and land management practice. In: 2011 Surveying and Spatial Sciences Conference: Innovation in Action: Working Smarter (SSSC 2011), 21-25 Nov 2011, Wellington, New Zealand.

Perera, Kithsiri and Moore, David and Apan, Armando and McDougall, Kevin (2011) Standardizing Australian semi-urban land cover mapping through FAO land cover classification system. In: 2011 Surveying and Spatial Sciences Conference: Innovation in Action: Working Smarter (SSSC 2011), 21-25 Nov 2011, Wellington, New Zealand.

Noor, M. M. and Yusaf, T. F. and Wandel, Andrew P. (2011) Study of random particle interactions for analysis of diffusion lengths in turbulent combustion modelling. In: Australian Combustion Symposium 2011 (ACS 2011), 29 Nov-1 Dec 2011, Newcastle, Australia.

Noor, M. M. and Amiruddin, A. K. and Kadirgama, K. and Sharma, K. V. (2011) The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP). In: 3rd International Conference on Energy and Sustainability , 11-13 Apr 2011, Alicante, Spain.

Lian, C. and Zhuge, Y. and Beecham, S. (2011) The relationship between porosity and strength for porous concrete. Construction and Building Materials, 25 (11). pp. 4294-4298. ISSN 0950-0618

Shiau, J. S. and Merifield, R. S. and Lyamin, A. V. and Sloan, S. W. (2011) Undrained stability of footings on slopes. International Journal of Geomechanics, 11 (5). pp. 381-390. ISSN 1532-3641

McDougall, Kevin (2011) Using volunteered information to map the Queensland floods. In: 2011 Surveying and Spatial Sciences Conference: Innovation in Action: Working Smarter (SSSC 2011), 21-25 Nov 2011, Wellington, New Zealand.

Yousif, B. F. and Nirmal, Umar (2011) Wear and frictional performance of polymeric composites aged in various solutions. Wear, 272 (1). pp. 97-104. ISSN 0043-1648

Olm, David William Charles (2011) Management of road reconstruction and repair following a flooding disaster. [USQ Project] (Unpublished)

Evans, Darryl (2011) Prototype development for a procurement and electronic document management system. [USQ Project] (Unpublished)

Taylor, B. A. (2011) Rapid estimation of rainwater yield throughout Australia and review of Queensland rainwater harvesting operating policy. In: 2011 SSEE International Conference: Escaping Silos (SSEE 2011), 24-26 Oct 2011, Brisbane, Australia.

Mossad, Ruth (2011) Energy usage reduction in supermarket refrigerated food cabinets. In: Lee, Susan, (ed.) Encyclopedia of energy engineering and technology. Taylor & Francis, London, United Kingdom, pp. 1-7. ISBN 0-8493-3896-4

Cortie, Michael B. and Xiao, Linda and Erdei, Laszlo and Kealley, Catherine S. and Dowd, Annette R. and Kimpton, Justin A. and McDonagh, Andrew M. (2011) Thermal stability of (KxNayH1–x–y)2Ti6O13 nanofibers. European Journal of Inorganic Chemistry (33). pp. 5087-5095. ISSN 1434-1948

Perera, Kithsiri and Tateishi, Ryutaro (2011) Phenological assessment of Darling River claypan lakes using satellite imagery. In: Autumn Scientific Conference of the Japan Society of Photogrammetry and Remote Sensing (JSPRS 2011) , 20-21 Oct 2011, Oita, Japan.

Abdulla, Shahab and Wen, Paul and Landers, Richard and Yousif, B. F. (2011) Fruit drying process: analysis, modeling and simulation. Scientific Research and Essays, 6 (23). pp. 4915-4924.

Lokuge, Weena and Aravinthan, Thiru and Sirimanna, Chamila Sampath and Islam, Mainul (2011) Influence of fly ash proportions on properties of polymer cconcrete with polyester resin. In: Concrete 2011: Building a Sustainable Future, 12-14 Oct 2011, Perth, Western Australia.

Bolt, Jason and Zhuge, Yan and Bullen, Frank (2011) The effect of titanium dioxide addition on the hydraulic and mechanical properties of permeable concrete. In: Concrete 2011: Building a Sustainable Future, 12-14 Oct 2011, Perth, Western Australia.

Dowling, David G. and Hadgraft, Roger G. (2011) A systematic consultation process to define graduate outcomes for engineering disciplines. In: REES 2011: Research in Engineering Education Symposium, 4-7 Oct 2011, Madrid, Spain.

Liu, Xiaoye and Zhang, Zhenyu (2011) Effects of LiDAR data reduction and breaklines on the accuracy of digital elevation model. Survey Review, 43 (323). pp. 614-628. ISSN 0039-6265

Marion, Michael (2011) A comparison of AUSGeoid09 and AUSGeoid98 in the Hawkesbury Valley. [USQ Project] (Unpublished)

Motswagae, Tshepo (2011) A laboratory experiment based on the ‘Segway’. [USQ Project] (Unpublished)

Fichera, Anthony (2011) A practical comparison of VISSIM and SIDRA for the assessment of development impacts. [USQ Project] (Unpublished)

Randall, Neil William (2011) A preliminary analysis of the effectiveness of the new QLD GDL program. [USQ Project] (Unpublished)

Najafi, Gholamhassan and Ghobadian, Barat and Yusaf, Talal F. (2011) Algae as a sustainable energy source for biofuel production in Iran: a case study. Renewable and Sustainable Energy Reviews, 15 (8). pp. 3870-3876. ISSN 1364-0321

Heit, Andrew (2011) An investigation into the parameters that affect the swell factor used in volume and design calculations at Callide open cut coal mine. [USQ Project] (Unpublished)

Temple-Watts, Philip (2011) An investigation into the suitability Of volunteered information to create a flood extent map. [USQ Project] (Unpublished)

Keleher, Matthew (2011) Analysis of high-speed rural traffic crashes within the South-West district of Toowoomba regional council. [USQ Project] (Unpublished)

O'Keeffe, Andrew (2011) Behaviour of polymer concrete for infilling fibre composite tubes. [USQ Project] (Unpublished)

Hockey, Josh (2011) Biometric analysis for remote examination system. [USQ Project] (Unpublished)

Leong, Ik Sung (2011) Broadband satellite internet service testing. [USQ Project] (Unpublished)

Goh, Steven and Hartle, Todd and Brodie, Megan (2011) Building leadership capacity of engineering academics in a leadership vacuum constructed within a participatory group to engage a professional body. In: REES 2011: Research in Engineering Education Symposium , 4-7 Oct 2011, Madrid, Spain.

Penman, Brian (2011) Calculation and comparison of the noise and latency of RTK observations using radio link and NTRIP. [USQ Project] (Unpublished)

Truasheim, Barak (2011) CFD modelling of a pump intake. [USQ Project] (Unpublished)

Tomkins, Brock William (2011) Chemical resistance of geopolymer concrete against H2SO4 & NaOH. [USQ Project] (Unpublished)

Mossad, Ruth (2011) Cooling towers. In: Capehart, Barney L., (ed.) Encyclopedia of energy engineering and technology. Taylor & Francis Books, London, United Kingdom, pp. 246-254. ISBN 978-0-8493-3653-9

Dong, Yu and Chaudhary, Deeptangshu and Ploumis, Charlie and Lau, Kin-tak (2011) Correlation of mechanical performance and morphological structures of epoxy micro/nanoparticulate composites. Composites Part A: Applied Science and Manufacturing , 42 (10). pp. 1483-1492. ISSN 1359-835X

Harrington, Daniel (2011) CSG water as a medium to grow marine microalgae for biofuel production. [USQ Project] (Unpublished)

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru and Cooney, Tyson (2011) Cure kinetics of an epoxidized hemp oil based bioresin system. Journal of Applied Polymer Science, 122 (1). pp. 444-451. ISSN 0021-8995

Seccull, Christopher (2011) Darwin residential end use pilot study. [USQ Project] (Unpublished)

Brown, Steven (2011) Design of a high-shear geopolymer concrete mixer. [USQ Project] (Unpublished)

Jeremie, Alexis (2011) Developing a home-based functional application for an EEG-based brain computer interface. [USQ Project] (Unpublished)

Kmita, Shane (2011) Echo cancellation in VoIP using digital adaptive filters. [USQ Project] (Unpublished)

Brodie, Lyn and Bullen, Frank and Jolly, Lesley (2011) Effective evaluation strategies to meet global accreditation requirements. In: FIE 2011: Celebrating 41 Years of Monumental Innovations From Around the World , 12-15 Oct 2011, Rapid City, SD. United States.

Wilson, Paul (2011) Effectiveness of lime stabilisation on reactive soils for main roads. [USQ Project] (Unpublished)

Delahunty, Bruce (2011) Elevated highways – a solution to Brisbane’s traffic congestion? [USQ Project] (Unpublished)

Craig, Ian and Thorpe, David and Goh, Steven (2011) Environmental sustainability education: towards a minimum service level agreement for delivery to engineering students. In: SSEE 2011: Escaping Silos , 24-26 Oct 2011, Brisbane, Australia.

Jolly, Hannah and Brodie, Lyn and Jolly, Lesley (2011) Evaluating tutor training for online PBL teamwork courses in first year engineering. In: REES 2011: Research in Engineering Education Symposium, 4-7 Oct 2011, Madrid, Spain.

Gillies, M. H. and Smith, R. J. and Raine, S. R. (2011) Evaluating whole field irrigation performance using statistical inference of inter-furrow infiltration variation. Biosystems Engineering, 110 (2). pp. 134-143. ISSN 1537-5110

Zeller, Karl (2011) Evaluation of the operational characteristics of heavy vehicles at signalised intersections in Queensland. [USQ Project] (Unpublished)

Mautoga, Marau (2011) Fracture toughness of glass powder reinforced vinyl ester resin post cured in a conventional oven using flexural test. [USQ Project] (Unpublished)

Wilson, Wayne (2011) Housing affordability in Roma: can progress be made within the regulatory and policy framework? [USQ Project] (Unpublished)

Morris, Mike (2011) Implementation of electronic measurement and recording of strata title field notes. [USQ Project] (Unpublished)

Turnbull, Jon (2011) Improving the performance of the Nanango wastewater treatment plant. [USQ Project] (Unpublished)

Case, Jiel (2011) Initial design of a high-performance and cost-effective mountain bike. [USQ Project] (Unpublished)

Goh, Steven and Ku, Harry (2011) Intervening to improve the dissertation of final year engineering research projects. In: FIE 2011: Celebrating 41 Years of Monumental Innovations From Around the World , 12-15 Oct 2011, Rapid City, SD. USA.

Kemp, Ryan (2011) Investigates the effect of surface shear on pavements near road intersection. [USQ Project] (Unpublished)

Craig, Aston J. (2011) Investigation into a fleet bearing monitoring system. [USQ Project] (Unpublished)

Fenn, Scott P. (2011) Investigation into relocatable home design and construction. [USQ Project] (Unpublished)

Bauer, Amelia (2011) Investigation into the biochemical methane potential of abattoir wastewater. [USQ Project] (Unpublished)

McDonald, Matthew (2011) Investigation into the limitation of measuring to 360 Degree prisms using automatic target recognition technology. [USQ Project] (Unpublished)

Davydov, Alexey (2011) Investigation of the structural failure of plywood noise barriers. [USQ Project] (Unpublished)

Dakin, Anthony (2011) Investigation of the suitability of finger jointed structural timber for use in nail plated roof trusses. [USQ Project] (Unpublished)

Tan, Yian Yian (2011) Measuring with Bees II: in home power and water monitoring. [USQ Project] (Unpublished)

Ward, Tristan (2011) Multicore algorithms for image alignment. [USQ Project] (Unpublished)

Pratt, Daniel (2011) Near infrared photogrammetric technique on structure beam monitoring. [USQ Project] (Unpublished)

Veenstra, Nathaniel (2011) Optimum strut-and-tie model for a cantilever curved wall. [USQ Project] (Unpublished)

Meredith, Tyronne (2011) Options for the replacement of aging bridges under local authority control in rural areas of Queensland. [USQ Project] (Unpublished)

Mohr, David (2011) Performance characterisation of pressure regulation devices used in broad-acre irrigation. [USQ Project] (Unpublished)

Goh, Steven and Hartle, Todd and Brodie, Megan (2011) Perspectives on leadership concepts by engineering academics. In: FIE 2011: Celebrating 41 Years of Monumental Innovations from around the World , 12-15 Oct 2011, Rapid City, SD. USA.

Maher, Daniel (2011) Projection of computer design data onto digital photographs. [USQ Project] (Unpublished)

McHugh, William (2011) Properties of nickel as a magnetostrictive material for ultrasonic conditions. [USQ Project] (Unpublished)

Millard, Aaron (2011) Property rights, cadastral boundaries & coastal erosion in New South Wales. [USQ Project] (Unpublished)

Kist, Alexander A. and Jolly, Hannah and Brodie, Lyn (2011) Quality of experience of online learning tools. In: REES 2011: Research in Engineering Education Symposium, 4-7 Oct 2011, Madrid, Spain.

Brookshaw, Iain (2011) Real time implementation of obstacle avoidance for an autonomous mobile robot using monocular computer vision. [USQ Project] (Unpublished)

Peauril, Joshua (2011) Recycling glass fibre composites – process and viability. [USQ Project] (Unpublished)

Farrington, Jock (2011) Redesign of an FSAE race car’s steering and suspension system. [USQ Project] (Unpublished)

Harriman, Adam J. (2011) Smart Grid for tomorrow’s electricity distribution. [USQ Project] (Unpublished)

Goh, Steven and Craig, Ian and Muller, Zach (2011) Solar thermal energy alternatives and their application to water heating and air cooling in the meat processing industry. In: SSEE 2011: Escaping Silos, 24–26 Oct 2011, Brisbane, Australia.

Dudley, Samuel (2011) Stability of underground tunnelling using relaxation techniques. [USQ Project] (Unpublished)

Cox, Adam (2011) Stereo vision for webcams. [USQ Project] (Unpublished)

Kilian, Simone (2011) Sugarcane bagasse reinforced thermoplastic composites. [USQ Project] (Unpublished)

Wandel, Andrew P. (2011) Team formation by region to improve outcomes for distance-education students in a PBL course. In: FIE 2011: Celebrating 41 Years of Monumental Innovations From Around the World , 12-15 Oct 2011, Rapid City, SD. United States.

Rackemann, Benjamin (2011) The analysis and redesign of the spraycam sprayer to incorporate fibre composite pultrusions. [USQ Project] (Unpublished)

Ledger, Allen (2011) The development of a high precision terrestrial laser scanner calibration range at USQ. [USQ Project] (Unpublished)

Searle, Joshua (2011) The efficient use of building mechanical services for saving energy. [USQ Project] (Unpublished)

Atem, Thiew (2011) The skid mounted substation. [USQ Project] (Unpublished)

Kist, Alexander A. (2011) Trialling an assignment structure that develops generic competencies and enriches subject understanding. In: Grainger, Steven and Kestell , Colin, (eds.) Engineering education: an Australian perspective. Multi-Science Publishing Co. Ltd., Essex, United Kingdom, pp. 43-51. ISBN 9781907132292

Lenton, Paul (2011) Use of near-infrared photogrammetry to determine crack and surface deformation in small structures. [USQ Project] (Unpublished)

Heaton, Erin (2011) Use of vibration signature in structural health monitoring (composite/internal damages). [USQ Project] (Unpublished)

Yin, Matthew (2011) Using local gravel sources and granular stabilisation for the production of pavement gravels in the Toowoomba region. [USQ Project] (Unpublished)

Nixon, Phillip (2011) Using sun observations to set an azimuth combining and comparing Automatic Target Recognition in a Total Station with GPS observed time and position. [USQ Project] (Unpublished)

Prasad, Nitesh Nitin (2011) Verification of simplified optimum designs for reinforced concrete beams. [USQ Project] (Unpublished)

Kist, Alexander A and Wandel, Andrew P. (2011) Work in progress – performance evaluation of online learning tools. In: FIE 2011: Celebrating 41 Years of Monumental Innovations From Around the World, 12-15 Oct 2011, Rapid City, SD. United States.

He, J. and Li, H. W. and Tullberg, J. N. and McHugh, A. D. and Li, H. (2011) Conservation tillage improves soil properties and crops yields in North China. In: WCCA 2011: Resilient Food Systems for a Changing World, 26-29 Sep 2011, Brisbane, Australia.

Koech, R. K. and Smith, R. J. and Gillies, M. H. (2011) Design of an automatic furrow irrigation system utilising adaptive real-time control. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Uddin, J. and Smith, R. J. and Hancock, N. H. and Foley, J. (2011) Eddy covariance measurements of the total evaporation during sprinkler irrigation - preliminary results. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Huweg, Abdurrahman F. S. and Kamel, Fouad and Raine, Steven (2011) Effect of electro-osmosis on soil-water potential and water chemistry in sand. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Li, H. and Li, H. W. and McHugh, A. D. and He, J. (2011) Improved no-till seeding performance in Northern China using powered-chain residue manager. In: WCCA 2011: Resilient Food Systems for a Changing World, 26-29 Sep 2011, Brisbane, Australia.

Li, H. W. and He, J. and Gao, H. W. and Tullberg, J. N. and McHugh, A. D. and Li, H. (2011) Increasing crop yields through conservation tillage in dryland areas of China. In: WCCA 2011: Resilient Food Systems for a Changing World, 26-29 Sep 2011, Brisbane, Australia.

Baillie, J. and Brodie, I. (2011) Review of dynamic water allocation systems. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

McHugh, A. D. and Li, H. and Ma, Z. and Cao, X. and Zhang, L. (2011) Short term agronomic gains from conservation agriculture in NW China. In: WCCA 2011: Resilient Food Systems for a Changing World, 26-29 Sep 2011, Brisbane, Australia.

Al-Sandooq, J. M. and Yousif, B. F. and Jensen, T. A. (2011) The possibility of using polymers in agriculture milling equipment. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Nawi, Nazmi Mat and Chen, Guangnan and Jensen, Troy and Baillie, Craig (2011) Transferring technology of measuring sugarcane quality from the laboratory to the field: what is possible? In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Koech, R. K. (2011) Trends in the surface irrigation systems in the Australian irrigated agriculture. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Tullberg, J. and McHugh, A. and Ghareel Khabbaz, B. and Scheer, C. and Grace, P. (2011) Controlled traffic/permanent bed farming reduces GHG emissions. In: WCCA 2011: Resilient Food Systems for a Changing World , 26-29 Sep 2011, Brisbane, Australia.

Uddin, J. and Smith, R. J. and Hancock, N. H. and Foley, J. (2011) Evaluation of sap flow sensors to measure the transpiration rate of plants during sprinkler irrigation. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Kist, Alexander A. and Maxwell, Andrew and Gibbings, Peter and Fogarty, Roderick and Midgley, Warren and Noble, Karen (2011) Engineering for primary school children: learning with robots in a remote access laboratory. In: 39th SEFI Annual Conference: Global Engineering Recognition, Sustainability and Mobility (SEFI 2011), 27-30 Sep 2011, Lisbon, Portugal.

Maxwell, Andrew and Kist, Alexander A. (2011) Review of e-submission and e-marking to provide quality feedback and minimise turn around times for external students. In: 39th SEFI Annual Conference: Global Engineering Recognition, Sustainability and Mobility (SEFI 2011), 27-30 Sep 2011, Lisbon, Portugal.

Burgess, R. and Ahfock, A. (2011) The use of voltage regulators in power systems with arc-suppression coils. In: AUPEC 2011: Integrating Renewables into the Grid, 25-28 Sep 2011, Brisbane, Australia.

Akbar, G. and McHugh, A. D. and Raine, S. R. and Hamilton, G. (2011) A preliminary evaluation of furrow inflow rate and cut-off time on the performance of smallholder raised bed farming systems. In: WCCA 2011: Resilient Food Systems for a Changing World, 26-29 Sep 2011, Brisbane, Australia.

Akbar, G. and Raine, S. and McHugh, J. and Hamilton, G. (2011) A preliminary evaluation of irrigation performance and in season changes under permanent raised beds on Vertosol in Queensland, Australia. In: WCCA 2011: Resilient Food Systems for a Changing World, 26-29 Sep 2011, Brisbane, Australia.

Hussain, Zahid and Irfan, Muhammad and Akbar, Ghani (2011) Advanced design of permanent raised bed machinery in Pakistan. In: WCCA 2011: Resilient Food Systems for a Changing World, 26-29 Sep 2011, Brisbane, Australia.

Marwan, M. and Kamel, F. (2011) Optimum demand side response of smart grid with renewable energy source and electrical vehicles. In: AUPEC 2011: Integrating Renewables into the Grid , 25-28 Sep 2011, Brisbane, Australia .

Rashidi, Majid and Khabbaz, Borzoo Ghareei (2011) Finite element modeling of soil sinkage by multiple loadings. In: CIGR 2011 International Symposium on Sustainable Bioproduction - Water, Energy, and Food (WEF 2011), 19-23 Sep 2011, Tokyo, Japan.

Zhou, Hong and Su, Gang and Li, Guofang (2011) Forecasting daily gas load with OIHF-Elman neural network. In: 2nd International Conference on Ambient Systems, Networks and Technologies (ANT 2011) , 19-21 Sep 2011, Niagara Falls, ON. Canada.

Campbell, Glenn and Phinn, Stuart R. and Dekker, Arnold G. and Brando, Vittorio E. (2011) Remote sensing of water quality in an Australian tropical freshwater impoundment using matrix inversion and MERIS images. Remote Sensing of Environment, 115 (9). pp. 2402-2414. ISSN 0034-4257

Pittaway, P. and Matveev, V. and Stuckey, N. (2011) Effect of a monolayer on water quality at the air-water interface. In: 3rd Urban Water Security Reseach Alliance Science Forum and Stakeholder Engagement, 14-15 Sep 2011, Brisbane, Australia.

Brodie, I. (2011) Application of level spreader – grass filter strips in South East Queensland, Australia for discharge reduction and passive irrigation. In: 12th International Conference on Urban Drainage, 11-15 Sept 2011, Porto Alegre, Brazil .

Brodie, I. (2011) Stormwater harvesting and water sensitive urban design detention: a compatibility analysis. In: 12th International Conference on Urban Drainage, 11-15 Sept 2011, Porto Alegre, Brazil.

Clements, M. S. and Watt, A. C. and Debono, A. P. and Aziz, S. M. and Banhazi, T. M. (2011) A low cost portable environmental monitoring system for livestock buildings. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 28-30 Sep 2011, Gold Coast, Australia.

Schmidt, E. and Brink, G. N. and O'Shannassay, G. (2011) Application systems for optimal management of monolayer films. In: 3rd Urban Water Security Reseach Alliance Science Forum and Stakeholder Engagement, 14-15 Sep 2011, Brisbane, Australia.

Jensen, T. A. and Fokkema, B. and Baillie, C. (2011) Assessing various techniques to monitor yield in sugarcane. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Najafi, Gholmanhassan and Ghobadian, Barat and Yusaf, Talal F. (2011) Biofuel from microalgae: alternative, sustainable and renewable fuel. In: 10th International Conference on Sustainable Energy Technologies (SET 2011), 4-7 Sept 2011, Istanbul, Turkey.

Brodie, Lyn (2011) Delivering key graduate attributes via teams working in virtual space. International Journal of Emerging Technologies in Learning, 6 (3). pp. 5-11. ISSN 1868-8799

Shahid, Salman and Wen, Peng and Ahfock, Tony and Leis, John (2011) Effects of head geometry, coil position and CSF displacement on field distribution under transcranial magnetic stimulation. Journal of Medical Imaging and Health Informatics, 1 (3). pp. 271-277. ISSN 2156-7018

Chen, G. and Schmidt, E. and Symes, T. and Zhao, B. and Cameron, R. (2011) Energy use and development of online energy calculators for the nursery industry. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Baillie, C. P. and Chen, G. (2011) Energy, greenhouse gas emissions and irrigated agriculture. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Goh, Steven and Bullen, Frank (2011) Engineering faculties in developing and assessing professional competencies for engineers in Australia. In: 39th SEFI Annual Conference: Global Engineering Recognition, Sustainability and Mobility (SEFI 2011), 27-30 Sep 2011, Lisbon, Portugal.

Tscharke, M. J. and Banhazi, T. M. (2011) Growth recorded automatically and continuously by a machine vision system for finisher pigs. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 28-30 Sep 2011, Gold Coast, Australia.

Dang, Y. P. and Pringle, M. J. and Schmidt, M. and Dalal, R. C. and Apan, A. (2011) Identifying the spatial variability of soil constraints using multi-year remote sensing. Field Crops Research, 123 (3). pp. 248-258. ISSN 0378-4290

Bruce, Thomas (2011) Investigation of cost and performance characteristic of photovoltaic panels. [USQ Project] (Unpublished)

Chan, Mo-lin and Lau, Kin-tak and Wong, Tsun-tat and Ho, Mei-po and Hui, David (2011) Mechanism of reinforcement in a nanoclay/polymer composite. Composites Part B: Engineering, 42 (6). pp. 1708-1712. ISSN 1359-8368

McCabe, B. K. and Pittaway, P. and Baillie, C. and Harris, P. (2011) Monitoring the performance of covered anaerobic ponds in the treatment of abattoir waste. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Li, Chang and Wang, Yafeng and Xiang, Wei and Yang, Dacheng (2011) Outage probability analysis of coded cooperation with multiple relays. In: 2011 IEEE Vehicular Technology Conference: Smarter Communication for an Intelligent World (VTC 2011-Fall), 5-8 Sept 2011, San Francisco, CA. USA.

Li, Chang and Wang, Yafeng and Xiang, Wei and Yang, Dacheng (2011) Performance analysis for coded cooperative multiple-relay in distributed turbo channels. In: IEEE 22nd International Symposium on Personal Indoor and Mobile Radio Communications (PIMRC 2011), 11-14 Sep 2011, Toronto, Canada.

Atzeni, Michael and Sohn, Jae-Ho and Hancock, Nigel and Banhazi, Thomas (2011) Relating flock activity levels to odour variations in tunnel ventilated broiler sheds - preliminary results. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Tscharke, M. and Banhazi, T. M. (2011) Review of methods to determine weight, size and composition of livestock from images. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Helwig, A. and Ahfock, A. (2011) Sizing nickel iron batteries for RAPS systems. In: 2011 IET Renewable Power Generation Conference (RPG 2011) , 6-8 Sep 2011, Edinburgh, UK.

Banhazi, T. M. (2011) Spatial, diurnal and seasonal variations in the levels of environmental parameters in Australian livestock buildings. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Kist, Alexander A. and Brodie, Lyn (2011) SPIDER – enabling seminar presentations for distance education. In: 39th SEFI Annual Conference: Global Engineering Recognition, Sustainability and Mobility (SEFI 2011), 27-30 Sep 2011, Lisbon, Portugal.

Riley, Scott and Basson, Marita (2011) Stakeholder perceptions of the impact of the declaration of an urban development area in Moranbah: how sustainable will the outcomes be? Queensland Planner, 51 (3). pp. 18-23. ISSN 1326-3374

Nawi, Nazmi Mat and Jensen, Troy and Chen, Guangnan and Baillie, Craig (2011) The application of spectroscopic methods to predict sugarcane quality based on stalk cross-sectional scanning. In: SEAg 2011: Diverse Challenges, Innovative Solutions, 29-30 Sep 2011, Gold Coast, Australia.

Singh, Narish and Yousif, B. F. and Rilling, Dirk (2011) Tribological characteristics of sustainable fibre reinforced thermoplastic composites under wet adhesive wear. Tribology Transactions, 54 (5). 736-748. ISSN 1040-2004

Salim, Omar Hazim and Xiang, Wei and Leis, John (2011) Error-resilient video transmission for 3-D signal over cooperative-MIMO system. In: EUSIPCO 2011: 19th European Signal Processing Conference, 29 Aug-2 Sep 2011, Barcelona, Spain.

Malvern, J. L. and Epaarachchi, J. A. and Lau, K. T. (2011) Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions. In: 18th International Conference on Composite Materials (ICCM-18), 21-26 Aug 2011, Jeju Island, South Korea.

Hussain, Amjed and Raine, Steven R. (2011) A preliminary evaluation of in-season variations in sprinkler irrigation application patterns. In: Irrigation 2011: New Horizons, Fresh Ideas Regional Conference and Exhibition, 22-25 Aug 2011, Launceston, Tasmania.

Misra, R. K. and Padhi, J. and Payero, J. O. (2011) A calibration procedure for load cells to improve accuracy of mini-lysimeters in monitoring evapotranspiration. Journal of Hydrology, 406 (1-2). pp. 113-118. ISSN 0022-1694

Potgieter, Andries and Apan, Armando and Hammer, Graeme and Dunn, Peter (2011) Estimating winter crop area across seasons and regions using time-sequential MODIS imagery. International Journal of Remote Sensing, 32 (15). pp. 4281-4310. ISSN 0143-1161

Wen, Peng and Li, Yan (2011) Twin rotor system modelling de-coupling and optimal control. In: ICMA 2011: IEEE International Conference on Mechatronics and Automation, 7-10 Aug 2011, Beijing, China.

Yusaf, T. F. and Yousif, B. F. and Elawad, M. M. (2011) Crude palm oil fuel for diesel-engines: experimental and ANN simulation approaches. Energy, 36 (8). 4871-4878. ISSN 0360-5442

Yusaf, T. and Saleh, K. H. and Said, M. A. (2011) Engine performance and emission analysis of LPG-SI engine with the aid of artificial neural network. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 225 (5). pp. 591-600. ISSN 0957-6509

Scarmana, G. (2011) Image reconstruction in the contour domain. In: ISDE 7: 7th International Symposium on Digital Earth , 23-25 Aug 2011, Perth, Australia.

Wang, Hao and Shi, Zhiming (2011) In vitro biodegradation behavior of magnesium and magnesium alloy. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 98B (2). pp. 203-209. ISSN 1552-4973

Lau, Alan K. T. and Ho, Mabel M. P. (2011) Recent research trend in natural-fibre composites. JEC Composites (67). pp. 50-52. ISSN 1639-965X

Ku, H. S. (2011) Relationship between different mechanical properties of phenol formaldehyde SLG-reinforced composites. Journal of Reinforced Plastics and Composites, 30 (15). pp. 1281-1292. ISSN 0731-6844

Alshadli, Duaa and Chong, Albert K. and McDougall, Kevin and AL-Baghdadi, Jasim Ahmed Ali (2011) Skin texture-enhancement for automated 3D point cloud generation in Charcot-Marie-Tooth disease application. In: ICEMI 2011: 10th International Conference on Electronic Measurement and Instruments, 16-18 Aug 2011, Chengdu. China.

McDougall, Kevin (2011) Understanding the impact of volunteered geographic information during the Queensland floods. In: ISDE 7: 7th International Symposium on Digital Earth, 23-25 Aug 2011, Perth, Australia.

Gao, Rui and Zhou, Hong and Su, Gang (2011) Structure of wireless sensors network based on TinyOS. In: 2011 International Conference on Control, Automation and Systems Engineering (CASE 2011), 30-31 Jul 2011, Singapore.

Manalo, Allan C. and Aravinthan, Thiru (2011) Flexural behaviour of glulam beams from novel sandwich panels. In: 16th International Conference on Composite Structures (ICCS 16), 28-30 July 2011, Porto, Portugal.

El Saliby, Ibrahim and Shon, Ho Kyong and Erdei, Laszlo and Kim, Jong-Beom and Kim, Jong-Ho (2011) Co-doped photocatalyst nanomaterials for effective utilisation of solar radiation. In: 8th Asia Pacific Conference on Sustainable Energy and Environmental Technologies (APCSEET 2011), 10-13 Jul 2011, Adelaide, South Australia.

Shiau, Jim S. (2011) A shakedown limit under Hertz contact pressure. In: 2011 International Conference on Advanced Engineering Materials and Technology (AEMT 2011), 29-31 Jul 2011, Sanya, China.

Dowling, David (2011) A study of VET advanced diploma and HE associate degree programs in engineering. In: NCVER 2011: 20th National Vocational Education and Training Research Conference: No Frills , 13-15 Jul 2011, Coffs Harbour, Australia.

Leis, John W. (2011) Digital signal processing using MATLAB for students and researchers. John Wiley & Sons, Inc., Hoboken, NJ, USA. ISBN 978-0-470-88091-3

Bose, Saswata and Kim, Nam Hoon and Kuila, Tapas and Lau, Kin-tak and Lee, Joong Hee (2011) Electrochemical performance of a graphene–polypyrrole nanocomposite as a supercapacitor electrode. Nanotechnology, 22 (29). p. 5202. ISSN 0957-4484

Lian, C. and Zhuge, Y. and Beecham, S. (2011) Evaluation of permeability of porous concrete. In: AEMT 2011: International Conference on Advanced Engineering Materials and Technology, 29-31 Jul 2011, Sanya, China.

Goh, Steven (2011) Leadership in engineering education from K-12 to university: key to improving diversity in the engineering profession. In: ICWES 15: 15th International Conference of Women Engineers and Scientists , 19-22 Jul 2011, Adelaide, South Australia .

Nguyen-Ky, Tai and Wen, Peng (Paul) and Li, Yan and Gray, Robert (2011) Measuring and reflecting depth of anesthesia using wavelet and power spectral density. IEEE Transactions on Information Technology in Biomedicine, 15 (4). pp. 630-639. ISSN 1089-7771

Burgess, R. and Ahfock, A. (2011) Minimising the risk of cross-country faults in systems using arc suppression coils. IET Generation, Transmission and Distribution, 5 (7). pp. 703-711. ISSN 1751-8687

Banhazi, T. M. and Lehr, H. and Black, J. L. and Crabtree, H. and Schofield, P. and Tscharke, M. and Berckmans, D. (2011) Precision livestock farming: scientific concepts and commercial reality. In: XVth International Congress on Animal Hygiene: Animal Hygiene and Sustainable Livestock Production (ISAH 2011), 3-7 July 2011, Vienna, Austria .

Kim, M. T. and Rhee, K. Y. and Lee, J. H. and Hui, D. and Lau, Alan K. T. (2011) Property enhancement of a carbon fiber/epoxy composite by using carbon nanotubes. Composites Part B: Engineering , 42 (5). pp. 1257-1261. ISSN 1359-8368

Wang, Gengkun and Xiang, Wei and Chen, Haoyu and Wen, Peng (2011) Wireless sensor home automation networks based upon Sun SPOT. In: ICSSC 2011: IET International Conference on Smart and Sustainable City (IET ICSSC2011), 6-8 Jul 2011, Shanghai, China.

Dowling, David (2011) A review of engineering technician education in Australia: programs, pathways and perspectives. In: 2011 ASEE Annual Conference & Exposition: Your Passport to Engineering Education (ASEE 2011), 26-29 Jun 2011, Vancouver, BC, Canada.

Ku, H. and Ahfock, T. and Yusaf, T. (2011) Remote access laboratories in Australia and Europe. European Journal of Engineering Education, 36 (3). pp. 253-268. ISSN 0304-3797

Su, Gang and Zhou, Hong and Gao, Rui (2011) Intelligent building fire warning system with WSN. In: 4th IEEE International Conference on Computer Science and Information Technology, 10-12 Jun 2011, Chengdu, China.

Campbell, G. (2011) A principles-based approach to cadastral reinstatement for Australian jurisdictions. Journal of Spatial Science, 56 (1). pp. 15-25. ISSN 1449-8596

Ku, H. and Wang, H. and Pattarachaiyakoop, N. and Trada, M. (2011) A review on the tensile properties of natural fiber reinforced polymer composites. Composites Part B: Engineering, 42 (4). pp. 856-873. ISSN 1359-8368

Wang, Yafeng and Wei, Guoxing and Xiang, Wei (2011) Approximate inter-cell interference modeling for cellular network. Journal of China Universities of Posts and Telecommunications, 18 (3). pp. 75-79. ISSN 1005-8885

Mai-Duy, N. and Tran-Cong, T. (2011) Compact local integrated-RBF approximations for second-order elliptic differential problems. Journal of Computational Physics , 230 (12). pp. 4772-4794. ISSN 0021-9991

Kist, Alexander A. and Aldraho, Abdelnour (2011) Dynamic topologies for sustainable and energy efficient traffic routing. Computer Networks, 55 (9). pp. 2271-2288. ISSN 1389-1286

Ismail, Siti A. and Chen, Guangnan and Baillie, Craig and Symes, Troy (2011) Energy uses for cotton ginning in Australia. Biosystems Engineering, 109 (2). pp. 140-147. ISSN 1537-5110

Kuczynski, Tadeusz and Blanes-Vidal, Victoria and Li, Baoming and Gates, Richard S. and Nääs, Irenilza de Alencar and Moura, Daniella J. and Berckmans, Daniel and Banhazi, Thomas M. (2011) Impact of global climate change on the health, welfare and productivity of intensively housed livestock. International Journal of Agricultural and Biological Engineering, 4 (2). pp. 1-22. ISSN 1934-6344

Chong, Albert K. (2011) Low-cost compact cameras: a medical application in CMT disease monitoring. Photogrammetric Record, 26 (134). pp. 263-273. ISSN 0031-868X

Billingsley, John (2011) Machine vision in agriculture. In: Glinski, Jan and Horabik, Jozef and Lipiec, Jerzy, (eds.) Encyclopedia of agrophysics. Encyclopedia of Earth Sciences Series . Springer, Dordrecht, Netherlands, pp. 433-435. ISBN 978-90-481-3584-4

Wang, Gengkun and Xiang, Wei and Yuan, Jinhong and Huang, Tao (2011) Outage analysis of non-regenerative analog network coding for two-way multi-hop networks. IEEE Communications Letters, 15 (6). pp. 662-664. ISSN 1089-7798

Bose, Saswata and Kuila, Tapas and Nguyen, Thi Xuan Hien and Kim, Nam Hoon and Lau, Kin-tak and Lee, Joong Hee (2011) Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenge. Progress in Polymer Science , 36 (6). pp. 813-843. ISSN 0079-6700

Yusaf, Talal and Goh, Steven and Borserio, J. A. (2011) Potential of renewable energy alternatives in Australia. Renewable and Sustainable Energy Reviews, 15 (5). pp. 2214-2221. ISSN 1364-0321

Ma, Zhangchao and Xiang, Wei and Long, Hang and Wang, Wenbo (2011) Proportional fair resource partition for LTE-advanced networks with Type I relay nodes. In: ICC 2011: Source of Innovation: Back to the Origin, 5-9 Jun 2011 , Kyoto, Japan.

Wang, Yafeng and Liang, Min and Xiang, Wei (2011) Semi-distributed relay selection algorithm for multi-user cooperative wireless networks. Journal of Networks, 6 (6). pp. 907-911. ISSN 1796-2056

Peng, Tianshu and Struthers, Craig and Zhe, Jianwu and Liu, Guangming and Shen, Yulin and Sun, Yitong (2011) Sensorless pressure control for special industrial applications. In: ISIA 2010: International Symposium on Information and Automation , 10-11 Nov 2010, Guangzhou, China.

Tavakkoli, Ehsan and Lyons, Graham and English, Peter and Guppy, Chris (2011) Silicon nutrition of rice is affected by soil pH, weathering, and silicon fertilisation. Journal of Plant Nutrition and Soil Science, 174 (3). pp. 437-446. ISSN 1436-8730

Ray, Malpress (2011) Spark ignition internal combustion engine efficiency improvement - a variable compression ratio option. [Thesis (_PhD/Research)] (Unpublished)

Ku, H. and Prajapati, M. and Cardona, F. (2011) Thermal properties of sawdust reinforced vinyl ester composites post-cured in microwaves: a pilot study. Composites Part B: Engineering, 42 (4). pp. 898-906. ISSN 1359-8368

Brink, Gavin Neil (2011) Universal design framework for optimal application of chemical monolayer to open water surfaces. [Thesis (_PhD/Research)] (Unpublished)

Taylor, B. (2011) Approaching water sensitive cities with adaptive rainwater diversion. In: 2011 Stormwater Industry Association of Queensland State Conference: Achieving Multiple Outcomes - A Time to Reflect (SIA 2011) , 25-27 May 2011, Gold Coast, Australia.

Brodie, Ian (2011) Proof of concept analysis of level spreader – grass filter strips for runoff reduction. In: 2011 Stormwater Industry Association of Queensland State Conference: Achieving Multiple Outcomes - A Time to Reflect (SIA 2011) , 25-27 May 2011, Gold Coast, Australia.

Abdulla, Shahab and Wen, Peng (2011) Depth of anaesthesia patient models and control. In: 2011 IEEE/ICME International Conference on Complex Medical Engineering (CME 2011), 22-25 May 2011 , Harbin, China .

Shahid, Salman and Wen, Peng and Ahfock, Tony (2011) Effect of fat and muscle tissue conductivity on cortical currents - a tDCS study. In: 2011 IEEE/ICME International Conference on Complex Medical Engineering (CME 2011), 22-25 May 2011, Harbin, China.

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2011) The implementation of statistical inference to study the bending strength of sustainable hybrid sandwich panel composite. In: CEABM 2011: 1st International Conference on Civil Engineering, Architecture and Building Materials, 18-20 Jun 2011, Haikou, China.

Shrestha, Roshani and Brodie, Ian (2011) A protocol for the use of particle counting in stormwater suspended solids analysis. In: 2011 Stormwater Industry Association of Queensland State Conference: Achieving Multiple Outcomes - A Time to Reflect (SIA 2011) , 25-27 May 2011, Gold Coast, Australia.

Aravinthan, V. and Hoque, M. A. (2011) Development and calibration of bio-kinetic model for surfactant biodegradation with combined respirometric and titrimetric measurements. Bioresource Technology, 102 (9). pp. 5504-5513. ISSN 0960-8524

Kist, A. A. and Brodie, Lyn (2011) Mapping learning outcomes and assignment tasks for SPIDER activities. International Journal of Emerging Technologies in Learning, 6 (S2). pp. 25-32. ISSN 1863-0383

Le-Cao, K. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2011) Numerical study of stream-function formulation governing flows in multiply-connected domains by integrated RBFs and Cartesian grids. Computers and Fluids , 44 (1). pp. 32-42. ISSN 0045-7930

El Saliby, Ibrahim and Erdei, Laszlo and Shon, Ho Kyong and Kim, Jong Beom and Kim, Jong-Ho (2011) Preparation and characterisation of mesoporous photoactive Na-titanate microspheres. Catalysis Today, 164 (1). pp. 370-376. ISSN 0920-5861

Guades, E. J. and Aravinthan, T. and Islam, M. M. (2011) Driveability of composite piles. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011) , 27-29 Apr 2011, Brisbane, Australia.

Kabir, M. M. and Wang, H. and Aravinthan, T. and Cardona, F. and Lau, K.-T. (2011) Effects of natural fibre surface on composite properties: a review. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing , 27-29 Apr 2011, Brisbane, Australia.

Manthey, N. W. and Cardona, F. and Aravinthan, T. (2011) Mechanical properties of epoxidized hemp oil based biocomposites: preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27 -29 Apr 2011, Brisbane, Australia.

Cooney, T. I. and Cardona, F. and Tran-Cong, T. (2011) Kinetics of in situ epoxidation of hemp oil under heterogeneous reaction conditions: an overview with preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27-29 Apr 2011, Brisbane, Australia.

Marwan, M. and Kamel, F. and Xiang, W. (2011) Mitigation of electricity price/demand using demand side response smart grid model. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011), 27-29 Apr 2011, Brisbane, Australia.

Manalo, A. C. and Aravinthan, T. (2011) The effects of fibre wraps on the flexural behaviour of glulam composite sandwich beams. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011), 27-29 Apr 2011, Brisbane, Australia.

King, Robin and Dowling, David and Godfrey, Elizabeth (2011) Pathways from VET awards to engineering degrees: a higher education perspective. Technical Report. Australian National Education Taskforce .

Pittaway, P. (2011) Compost application to replace spagnum peat and to suppress pythium root rot in turf in the Middle East. In: ISHS 2011: International Symposium Organic Matter Management and Compost Use in Horticulture, 4-7 Apr 2011, Adelaide, South Australia.

Islam, Md Mainul and Kim, Ho Sung (2011) Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment. Journal of Materials Processing Technology, 211 (4). pp. 708-716. ISSN 0924-0136

Nguyen-Van, H. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2011) Buckling and vibration analysis of laminated composite plate/shell structures via a smoothed quadrilateral flat shell element with in-plane rotations. Computers and Structures, 89 (7-8). pp. 612-625. ISSN 0045-7949

Shrestha, R. and Brodie, I. (2011) Classification of stormwater treatment devices for performance evaluation. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011), 27-29 Apr 2011, Brisbane, Australia.

Brodie, Lyn and Bullen, Frank and Gibbings, Peter (2011) Developing an engineering education research culture. In: EDUCON 2011: Learning Environments and Ecosystems in Engineering Education, 4-6 Apr 2011, Amman, Jordan.

Tran, C.-D. and Lucas, S. and Phillips, D. G. and Randeniya, L. K. and Baughman, R. H. and Tran-Cong, T. (2011) Manufacturing polymer/carbon nanotube composite using a novel direct process. Nanotechnology, 22 (14). pp. 1453021-1453029. ISSN 0957-4484

Brodie, Lyn (2011) Problem based learning in virtual teams to deliver key graduate attributes. In: EDUCON 2011: Learning Environments and Ecosystems in Engineering Education, 4-6 Apr 2011, Amman, Jordan.

Wang, Yafeng and Wei, Guo-xing and Yang, Da-cheng and Xiang, Wei (2011) Research on uplink coordinated transmission schemes in LTE-advanced systems. Journal of China Universities of Posts and Telecommunications, 18 (2). pp. 72-77. ISSN 1005-8885

Kist, Alexander A. and Brodie, Lyn (2011) SPIDER activities: select, prepare and investigate, discuss, evaluate, reflect. In: EDUCON 2011: Learning Environments and Ecosystems in Engineering Education, 4-6 Apr 2011, Amman, Jordan.

Campbell, G. and Phinn, S. and Dekker, A. and Brando, V. (2011) The particle swarm optimisation for spectral matching applied to inland water quality remote sensing. In: 34th International Symposium on Remote Sensing of Environment, 10-15 April 2011, Sydney, Australia.

Paudyal, Dev Raj (2011) Pro-poor land management in developing countries: a case study in Nepal and India. VDM Verlag Dr Muller, Saarbrüchen, Germany. ISBN 978-3-639-34775-3

Wang, Gengkun and Xiang, Wei and Yuan, Jinhong and Huang, Tao (2011) Outage performance of analog network coding in generalized two-way multi-hop networks. In: 2011 IEEE Wireless Communications and Networking Conference (WCNC 2011) , 28-31 Mar 2011, Cancun, Mexico.

El Saliby, Ibrahim and Erdei, Laszlo and Shon, Ho Kyong and Kim, Jong-Ho (2011) Development of visible light sensitive titania photocatalysts by combined nitrogen and silver doping. Journal of Industrial and Engineering Chemistry, 17 (2). pp. 358-363. ISSN 1226-086X

Abdulla, Shahab Anna and Wen, Peng (2011) Robust internal model control for depth of anaesthesia. International Journal of Mechatronics and Automation, 1 (1). pp. 1-8. ISSN 2045-1059

Shahid, S. and Ball, J. A. R. and Wells, C. G. and Wen, P. (2011) Reflection type Q-factor measurement using standard least squares methods. IET Microwaves, Antennas and Propogation, 5 (4). pp. 426-432. ISSN 1751-8725

Ku, H. (2011) The process of updating production engineering in an Australian regional university excellence in developing e-learning. In: 2011 International MultiConference of Engineers and Computer Scientists (IMECS 2011) , 16-18 Mar 2011, Kowloon, Hong Kong.

Mutsuyoshi, Hiroshi and Hai, Nguyen Duc and Shiroki, Kensuke and Aravinthan, Thiru and Manalo, Allan (2011) Experimental investigation of HFRP composite beams. In: FRPRCS-10: 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures , 2-4 Apr 2011, Tampa, FL. United States.

Ran, Jie and Wang, Yafeng and Yang, Dacheng and Xiang, Wei (2011) A novel selection incremental relaying strategy for cooperative networks. In: 2011 IEEE Wireless Communications and Networking Conference (WCNC 2011) , 28-31 Mar 2011 , Cancun, Mexico.

Ku, H. and Wong, P. and Maxwell, A. and Huang, J. and Fung, H. and Mohan, T. (2011) A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

Tavakkoli, Ehsan and Fatehi, Foad and Coventry, Stewart and Rengasamy, Pichu and McDonald, Glenn K. (2011) Additive effects of Na+ and Cl– ions on barley growth under salinity stress. Journal of Experimental Botany, 62 (6). pp. 2189-2203. ISSN 0022-0957

Geng, Jian and Wang, Yafeng and Huang, Fan and Xiang, Wei and Yang, Dacheng (2011) Analysis on the impact of antenna gain mismatch on precoding vector. In: 2011 IEEE Wireless Communications and Networking Conference (WCNC 2011), 28-31 Mar 2011, Cancun, Mexico.

Ho, Mei-po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

Liu, Xiaoye and Zhang, Zhenyu (2011) Drainage network extraction using LiDAR-derived DEM in volcanic plains. Area, 43 (1). pp. 42-52. ISSN 0004-0894

Lee, Jae-Hong and Abawi, Yahya and Kang, Chang-Sung and Choi, Byeong-Rourl and Park, Kyeong-Yeol and Lee, Ho-Jin (2011) Field-specific variable rate fertilizer application based on rice growth diagnosis and soil testing for high quality rice production. Journal of Crop Science and Biotechnology, 14 (1). pp. 79-84. ISSN 1975-9479

Ku, H. and Goh, S. and Ahfock, A. (2011) Flexible engineering degree programs with remote access laboratories in an Australian regional university known for its excellence in e-learning. Computer Applications in Engineering Education, 19 (1). pp. 18-25. ISSN 1099-0542

Yousif, B. F. and Al-Shalabi, Ammar and Rilling, Dirk G. (2011) On integration of mirror collector and Stirling engine for solar power system. In: 2007 International Conference on Environment: Survival and Sustainability (ESS 2007), 19-24 Feb 2007, Nicosia, Northern Cyprus.

Ma, Zhangchao and Xiang, Wei and Long, Hang and Wang, Wenbo (2011) Proportional fair-based in-cell routing for relay-enhanced cellular networks. In: 2011 IEEE Wireless Communications and Networking Conference (WCNC 2011) , 28-31 Mar 2011, Cancun, Mexico.

Ku, H. and Maxwell, A. and Wong, P. and Huang, J. and Fung, H. (2011) Relationship between electrical and mechanical loss tangents of hollow glass powder reinforced epoxy composites: a pilot study. Journal of Applied Polymer Science , 119 (5). pp. 2945-2952. ISSN 0021-8995

Ku, H. and Wong, P. and Huang, J. and Fung, H. and Mohan, T. (2011) Tensile tests of glass powder reinforced epoxy composites: pilot study. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

Ku, H. and Fulcher, R. and Xiang, W. (2011) Using computer software packages to enhance the teaching of engineering management science: part 1 - critical path networks. Computer Applications in Engineering Education, 19 (1). pp. 26-39. ISSN 1061-3773

Banerjee, S. and Bhattacharyya, D. (2011) Optimal design of sandwich panels made of wood veneer hollow cores. Composites Science and Technology, 71 (4). pp. 425-432. ISSN 0266-3538

Tavakkoli, Ehsan and Rengasamy, Pichu and McDonald, Glenn K. (2011) Assessment of sub-soil salinity and sodicity constraints to barley and faba bean production. Project Report. Grains Research and Development Corporation, Canberra, Australia.

Shahid, Salman and Wen, Peng and Ahfock, Tony and Leis, John (2011) Effects of head geometry and coil position on field distribution under transcranial magnetic stimulation. In: MECBME 2011: Connecting Professionals in Biomedical Sciences and Technology, 21-24 Feb 2011, Sharjah, UAE.

Fadhel, M. I. and Abdo, Ramez Abdulwasea and Yousif, B. F. and Zaharim, Azami and Sopian, K. (2011) Thin-layer drying characteristics of banana slices in a force convection indirect solar drying. In: EE 2011: 6th IASME/WSEAS International Conference on Energy and Environment , 23-25 Feb 2011, Cambridge, United Kingdom.

Campbell, Glenn (2011) Dirty water: remote sensing of water quality in tropical and sub-tropical freshwater impoundments. [Thesis (_PhD/Research)] (Unpublished)

Singh, N. and Yousif, B. F. and Rilling, D. (2011) Adhesive wear of thermoplastic composite based on kenaf fibres. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225 (2). pp. 101-109. ISSN 1350-6501

Yousif, B. F. and Yeh, Kok Soon (2011) Badminton training machine with impact mechanism. Journal of Engineering Science and Technology, 6 (1). pp. 61-68. ISSN 1823-4690

Manalo, Allan (2011) Behaviour of fibre composite sandwich structures: a case study on railway sleeper application. [Thesis (_PhD/Research)] (Unpublished)

Shiau, J. S. and Smith, C. A. (2011) Calculation of lateral earth pressures with layered backfill. In: Continuum and Distinct Element Numerical Modeling in Geomechanics, 14-16 Feb 2011, Melbourne, Australia.

Ahmed, Mansur and Islam, Md Saiful and Ahsan, Qumrul and Islam, Md Mainul (2011) Fabrication and characterization of unidirectional silk fibre composites. In: ICCST8: 8th International Conference on Composite Science and Technology, 22-24 Mar 2011, Kuala Lumpur, Malaysia.

Awad, Ziad K. and Yusaf, Talal F. (2011) Finite element analysis of fibre reinforce concrete beam subject to high temperature by using EURO-code models. In: ICCST8: 8th International Conference on Composite Science and Technology, 22-24 Mar 2011, Kuala Lumpur, Malaysia.

Ho-Minh, Dao (2011) Integrated radial basis function methods for Newtonian and non-Newtonian fluid flows. [Thesis (_PhD/Research)] (Unpublished)

Vigiak, O. and Newham, L. T. H. and Whitford, J. and Roberts, A. M. and Rattray, D. and Melland, A. R. (2011) Integrating farming systems and landscape processes to assess management impacts on suspended sediment loads. Environmental Modelling and Software, 26 (2). pp. 144-162. ISSN 1364-8152

Shiau, J. S. and Hobson, M. A. (2011) Modeling uplift of plate anchor. In: Continuum and Distinct Element Numerical Modeling in Geomechanics, 14-16 Feb 2011, Melbourne, Australia.

Nguyen-Ky, Tai (2011) Monitoring the depth of anaesthesia using simplified electroencephalogram (EEG). [Thesis (_PhD/Research)] (Unpublished)

Sirimanna, Chamila Sampath and Islam, Md Mainul and Aravinthan, Thiru (2011) Polymer based filler materials as infill for GFRP pile connector. In: ICCST8: 8th International Conference on Composite Science and Technology, 22-24 Mar 2011, Kuala Lumpur, Malaysia.

Le-Cao, Khoa (2011) Radial-basis-function calculations of heat and viscous flows in multiply-connected domains. [Thesis (_PhD/Research)] (Unpublished)

Buttsworth, David R. and Agrira, Abdalla and Malpress, Ray and Yusaf, Talal (2011) Simulation of instantaneous heat transfer in spark ignition internal combustion engines: unsteady thermal boundary layer modeling. Journal of Engineering for Gas Turbines and Power , 133 (2). pp. 1-5. ISSN 0742-4795

Tarawneh, Mouad. A. and Ahmad, Sahrim Hj. and Rasid, Rozaidi and Yahya, S. Y. and Lau, Kin-tak and Kong, Ing and Noum, Se Yong Eh (2011) Thermal behavior of MWNT-reinforced thermoplastic natural rubber nanocomposites. Journal of Reinforced Plastics and Composites, 30 (3). pp. 216-221. ISSN 0731-6844

Ho, Mei-Po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Mechanical properties of an injected silk fibre reinforced PLA composite. In: 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX), 14-17 Jan 2011, Auckland, New Zealand.

Banerjee, Sourish (2011) Creep response of polymeric honeycombs. In: 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX) , 14-17 Jan 2011, Auckland, New Zealand.

Liu, Xiaoye (2011) Accuracy assessment of LiDAR elevation data using survey marks. Survey Review, 43 (319). pp. 80-93. ISSN 0039-6265

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2011) Free vibration analysis of laminated composite plates based on FSDT using one-dimensional IRBFN method. Computers and Structures, 89 (1-2). pp. 1-13. ISSN 0045-7949

Lian, C. and Zhuge, Y. and Beecham, S. (2011) Modelling pervious concrete under compression loading – a discrete element approach. In: ICSBM 2011: 1st International Conference on Structures and Building Materials, 7-9 Jan 2011, Guangzhou, China.

Thomas, Melanie and King, David and Keogh, Diane U. and Apan, Armando and Mushtaq, Shahbaz (2011) Resilience to climate change impacts: a review of flood mitigation policy in Queensland, Australia. The Australian Journal of Emergency Management, 26 (1). pp. 8-17. ISSN 1324-1540

Ahfock, A. and Gambetta, D. (2011) Stator eddy-current losses in printed circuit brushless motors. IET Electric Power Applications , 5 (1). pp. 159-167. ISSN 1751-8660

Shiau, Jim S. and Hobson, Michael A. (2011) Teaching earth pressure theory using physical models: an example in civil engineering. In: International Engineering and Technology Education Conference 2011 (IETEC 2011) , 16-19 Jan 2011, Kuala Lumpur, Malaysia.

Campbell, Glenn and Phinn, Stuart R. and Daniel, Paul (2011) The specific inherent optical properties of three sub-tropical and tropical water reservoirs in Queensland, Australia. Hydrobiologia: The International Journal on Limnology and Marine Sciences, 658 (1). pp. 233-252. ISSN 0018-8158

Xiang, Wei and Zhu, Ce and Siew, Chee Kheong and Xu, Yuanyuan and Liu, Minglei (2011) 2-D scalable multiple description coding for robust H.264/SVC video communications. In: Zhu, Ce and Li, Yuenan and Niu , Xiamu, (eds.) Streaming media architectures, techniques, and applications: recent advances. Information Science Reference (IGI Global), Hershey, PA. United States, pp. 39-57. ISBN 978-1-61692-831-5

Chong, Albert and Milburn, Peter and Newsham-West, Richard (2011) 3D dynamic surface modelling of the foot and leg. Footwear Science, 3 (s1). pp. 35-37. ISSN 1942-4280

An-Vo, D. A. and Mai-Duy, N. and Tran-Cong, T. (2011) A C2-continuous control-volume technique based on Cartesian grids and two-node integrated-RBF elements for second-order elliptic problems. CMES: Computer Modeling in Engineering and Sciences, 72 (4). pp. 299-335. ISSN 1526-1492

Strahley, Matthew (2011) A comparison of depth sounder positioning techniques for hydrographic/bathymetric surveys. [USQ Project] (Unpublished)

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2011) A comparison of the shear behaviour of a fibre composite sandwich structure in the transverse and in-plane directions. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials , 7-10 Dec 2010, Melbourne, Australia.

Mai-Duy, N. and Tran-Cong, T. and Phan-Thien, N. (2011) A numerical technique based on integrated RBFs for the system evolution in molecular dynamics. CMES: Computer Modeling in Engineering and Sciences, 79 (4). pp. 223-236. ISSN 1526-1492

Mai-Duy, N. and Tran-Cong, T. (2011) A stable and accurate control-volume technique based on integrated radial basis function networks for fluid-flow problems. In: ACAM 6: 6th Australasian Congress on Applied Mechanics , 12-15 Dec 2010, Perth, Western Australia.

Gao, Rui and Zhou, Hong and Su, Gang (2011) A wireless sensor network environment monitoring system based on TinyOS. In: ICEOE 2011: International Conference on Electronics and Optoelectronics, 29-31 Jul 2011, Dalian, China.

Tran, C.-D. and An-Vo, D.-A. and Mai-Duy, N. and Tran-Cong, T. (2011) An integrated RBFN-based macro-micro multi-scale method for computation of visco-elastic fluid flows. CMES: Computer Modeling in Engineering and Sciences, 82 (2). pp. 137-162. ISSN 1526-1492

Geng, Jian and Pan, Chengkang and Huang, Fan and Xiang, Wei and Wang, Qixing and Guangyi, Liu and Xiaodong, Shen and Yang, Dacheng (2011) Antenna gain mismatch calibration for cooperative base stations. In: 2011 IEEE Vehicular Technology Conference: Smarter Communication for an Intelligent World (VTC 2011-Fall), 5-8 Sep 2011, San Francisco, CA, United States.

Zhuge, Y. and Yeap, K. X. (2011) Assessment of debonding failure models for FRP retrofitted URM structures. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials , 7-10 Dec 2010, Melbourne, Australia.

Hancock, N. H. and Pittaway, P. A. and Symes, T. W. (2011) Assessment of the performance of evaporation suppressant films: analysis and limitations of simple trialling methods. Australian Journal of Multi-Disciplinary Engineering, 8 (2). pp. 157-168. ISSN 1448-8388

Guades, E. J. and Sirimanna, C. S. and Aravinthan, T. and Islam, M. M. (2011) Behaviour of fibre composite pile under axial compression load. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Islam, M. M. and Aravinthan, T. (2011) Behaviour of fibre composite sandwich panels under uniformly distributed loading. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Hoque, M. A. and Aravinthan, V. and Pradhan, N. M. and Sakhiya, A. (2011) Combined titrimetric respirometer as a real-time sensor to monitor the aerobic biodegradation process of different substrates. Journal of Applied Sciences, 11 (13). pp. 2299-2305. ISSN 1812-5654

Mai-Duy, Nam and Tran-Cong, Thanh (2011) Compact local approximations employed with integrated RBFs for second-order elliptic differential equations. In: 3rd International Symposium on Computational Mechanics (ISCM III) and 2nd Symposium on Computational Structural Engineering (CSE II), 5-7 Dec 2011, Taipei, Taiwan.

Brodie, Lyn and Gibbings, Peter (2011) Connecting learners in virtual space: forming learning communities. In: Abawi, Lindy and Conway, Joan M. and Henderson, Robyn, (eds.) Creating connections in teaching and learning. Research on Teaching and Learning . Information Age Publishing, Charlotte, NC, United States, pp. 233-248. ISBN 978-1-61735-550-9 (pbk); 978-1-61735-551-6 9 (hbk); 978-1-61735-552-3 (ebook)

Sileh, Ibrahim Khalil and Alajel, Khalid Mohamed and Xiang, Wei (2011) Cooperative relay selection based UEP scheme for 3D video transmission over Rayleigh fading channel. In: 2011 International Conference on Digital Image Computing: Techniques and Application (DICTA 2011), 6-8 Dec 2011, Noosa, Australia .

Mahadi, Muhammad Razif (2011) Critical issues in precise machining of oversize moulds in polystyrene. [Thesis (_PhD/Research)] (Unpublished)

Marwan, M. and Kamel, F. (2011) Demand side response to mitigate electrical peak demand in eastern and southern Australia. In: ICSGCE 2011: IEEE 1st International Conference on Smart Grid and Clean Energy Technologies, 27-30 Sep 2011, Chengdu, China.

Walsh, Dan (2011) Design and retrofit a compressed gas powered engine to a motor scooter. [USQ Project] (Unpublished)

Rees, S. J. and McCarthy, C. L. and Baillie, C. P. and Burgos-Artizzu, X. P. and Dunn, M. T. (2011) Development and evaluation of a prototype precision spot spray system using image analysis to target guinea grass in sugarcane. Australian Journal of Multi-Disciplinary Engineering, 8 (2). pp. 97-106. ISSN 1448-8388

Thai-Quang, N. and Le-Cao, K. and Mai-Duy, N. and Tran-Cong, T. (2011) Discretisation of the velocity-pressure formulation with integrated radial-basis-function networks. Structural Longevity, 6 (2). pp. 77-91. ISSN 1944-611X

Kabir, M. M. and Wang, H. and Cardona, F. and Aravinthan, T. (2011) Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Ho, M. P. and Lau, K.T. and Wang, H. (2011) Effect of degumming on tussah silk fibre. In: ICCM18: Composite Materials: Key to the Future, 21-26 Aug 2011, Jeju, Korea.

Zhang, Z. and Wang, H. and Reid, A. and Aravinthan, T. (2011) Effects of fly ash source and curing procedure on strength development of geopolymers. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Zhou, Hong and Zhang, Zhongwei (2011) Examining QoS guarantees for real-time CBR services in broadband wireless access networks. In: Lee, Roger, (ed.) Software engineering, artificial intelligence, networking and parallel/distributed computing 2011. Studies in Computational Intelligence (368). Springer, Berlin, Germany, pp. 25-40. ISBN 978-3-642-22287-0

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2011) Experimental investigation into gomuti fibres/polyester composites. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Alajel, Khalid Mohamed and Xiang, Wei and Leis, John (2011) Face detection based on skin color modeling and modified Hausdorff distance. In: CCNC 2011: Emerging and Innovative Consumer Technologies and Applications, 9-12 Jan 2011, Las Vegas, NV. USA.

An-Vo, D. A. and Mai-Duy, N. and Tran-Cong, T. (2011) High-order upwind methods based on C2-continuous two-node integrated-RBF elements for viscous flows. CMES: Computer Modeling in Engineering and Sciences, 80 (2). pp. 141-177. ISSN 1526-1492

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. (2011) Identification of distortions to FBG spectrum using FBG fixed filters. In: ICCM18: Composite Materials: Key to the Future, 21-26 Aug 2011, Jeju, Korea.

Khan, Razmi and Eichmann, Troy and Buttsworth, David and Upcroft, Ben (2011) Image-based visual servoing for the super-orbital re-entry of Hayabusa spacecraft. In: Australasian Conference on Robotics and Automation (ACRA 2011) , 7-9 Dec 2011, Melbourne, Australia.

Rojas-Ponce, Samuel and Smith, Rod and Gillies, Malcolm (2011) Improved evaluation of bay (and furrow) irrigation. In: Irrigation 2011: New Horizons, Fresh Ideas Regional Conference and Exhibition, 22-25 Aug 2011, Launceston, Australia.

Banhazi, T. M. and Tscharke, M. and Ferdous, W. M. and Saunders, C. and Lee, S.-H. (2011) Improved image analysis based system to reliably predict the live weight of pigs on farm: preliminary results. Australian Journal of Multi-Disciplinary Engineering , 8 (2). pp. 107-119. ISSN 1448-8388

Burgess, Robert Thomas (2011) Improving high voltage power system performance using arc suppression coils. [Thesis (_PhD/Research)] (Unpublished)

Marwan, M. and Ledwich, G. and Ghosh, A. and Kamel, F. (2011) Integrating electrical vehicles to demand side response scheme in Queensland Australia. In: ISGT 2011: Smarter Grid for Sustainable and Affordable Energy Future, 13-16 Nov 2011, Perth, Western Australia.

Tavakkoli, Ehsan and English, Peter and Guppy, Chris (2011) Interaction of silicon and phosphorus mitigate manganese toxicity in rice in a highly weathered soil. Communications in Soil Science and Plant Analysis, 42 (5). pp. 503-513. ISSN 0010-3624

Leng, Jinsong and Li, Jianjun and Lau, Alan kin-tak (2011) Introduction. In: Leng, Jinsong and Lau, Alan kin-tak, (eds.) Multifunctional polymer nanocomposites. Taylor & Francis (CRC Press), Boca Raton, FL. United States, pp. 1-18. ISBN 978-1-4398-1682-0

Singh, Narish and Yousif, B. F. and Rilling, Dirk (2011) Investigations on wear and frictional properties of kenaf fibre polyurethane composites under dry and wet contact conditions. International Journal of Precision Technology, 2 (4). pp. 375-387. ISSN 1755-2060

An-Vo, D.-A. and Tran, C.-D. and Mai-Duy, N. and Tran-Cong, T. (2011) IRBFN-based multiscale solution of a model 1D elliptic equation. In: 33rd International Conference on Boundary Elements and other Mesh Reduction Methods, 28-30 Jun 2011, New Forest, UK.

Hussin, Manal and Zhuge, Yan and Bullen, Frank and Lokuge, Weena (2011) Laboratory evaluation of the stress-strain relationship of permeable concrete. In: CEABM 2011: 1st International Conference on Civil Engineering, Architecture and Building Materials , 18-20 Jun 2011, Haikou, China.

Dowling, D. G. (2011) Managing student diversity in the Master of Engineering Practice program: by design. Australasian Journal of Engineering Education, 17 (1). pp. 27-37. ISSN 1324-5821

Fitzgerald, Danial (2011) Managing the repair of transport infrastructure after a natural disaster. [USQ Project] (Unpublished)

Wigginton, David (2011) Measuring losses from on-farm water storages in the cotton industry. In: Irrigation 2011: New Horizons, Fresh Ideas Regional Conference and Exhibition, 22-25 Aug 2011, Launceston, Australia.

Yusaf, Talal (2011) Mechanical treatment of microorganisms using ultrasound, shock and shear technology. [Thesis (_PhD/Research)] (Unpublished)

Zhuge, Y. and Mills, J. (2011) Modelling of multi-panel transmission tower retrofitted with leg reinforcement. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Kist, Alexander A. (2011) Modelling of staged routing for reduced carbon footprints of large server clusters. International Journal of Communication Networks and Distributed Systems, 6 (1). pp. 28-44. ISSN 1754-3916

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2011) Moving least square - one dimensional integrated radial basis function networks for time dependent problems. In: 33rd International Conference on Boundary Elements and other Mesh Reduction Methods, 28-30 Jun 2011, New Forest, UK.

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2011) Multi-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applications. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Leng, Jinsong and Lau, Alan kin-tak, eds. (2011) Multifunctional polymer nanocomposites. Taylor & Francis (CRC Press), Boca Raton, FL. United States. ISBN 978-1-4398-1682-0

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2011) Natural fibre composites with QLD based fibres and vegetable oils. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Mossad, R. R. (2011) Numerical predictions of air temperature and velocity distribution to assist in the design of natural ventilation piggery buildings. Australian Journal of Multi-Disciplinary Engineering, 8 (2). pp. 181-187. ISSN 1448-8388

Hua, Fuan and Zhang, Chaoyi and Li, Qiang and Yu, Baoyi and Liu, Weihua and Li, Runxia and Xie, Shuisheng and Huang, Guojie and Cheng, Lei and Fu, Yao and Wang, Hao (2011) Numerical simulation of rolling process and microstructure evolution of AM50 Mg alloy during hot rolling process. Advanced Materials Research, 291-294 . pp. 449-454. ISSN 1662-8985

Lian, Chunqi and Zhuge, Yan and Beecham, Simon (2011) Numerical simulation of the mechanical behaviour of porous concrete. Engineering Computations: International Journal for Computer-Aided Engineering and Software, 28 (8). pp. 984-1002. ISSN 0264-4401

Banhazi, T. M. and Saunders, C. and Nieuwe, N. and Lu, V. and Banhazi, A. (2011) Oil spraying as an air quality improvement technique in livestock buildings: development and utilisation of a testing device. Australian Journal of Multi-disciplinary Engineering, 8 (2). pp. 169-180. ISSN 1448-8388

Ryan, Richard (2011) Optimisation of flow through a horizontal spiral baffled filter. [USQ Project] (Unpublished)

Brink, Gavin and Wandel, Andrew and Pittaway, Pam and Hancock, Nigel and Schmidt, Erik (2011) Optimising the design, installation and operation of a monolayer application system on a farm dam via a 'Universal Design Framework'. In: Irrigation 2011: New Horizons, Fresh Ideas Regional Conference and Exhibition, 22-25 Aug 2011, Launceston, Australia.

Meynink, William J. C. (2011) Parsimonious hydrological modelling for resource development. [Thesis (_PhD/Research)] (Unpublished)

Bolt, J. R. and Zhuge, Y. and Bullen, F. (2011) Photocatalytic construction materials: an overview of recent developments and their application to permeable concrete. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2011) Preliminary development of polymer based filler materials for GFRP tubular connector. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Schmidt, E. and Brink, G. and Coop, P. and Hancock, N. and Pittaway, P. and Stuckey, N. and Wigginton, D. (2011) Progress in evaporation mitigation research. In: Irrigation 2011: New Horizons, Fresh Ideas Regional Conference and Exhibition, 22-25 Aug 2011, Launceston, Australia.

Goh, Steven C. and Ku, Harry S. (2011) Qualitative methodologies for dummies: engineers in investigation the quality of final year Engineering Research Project. In: 1st International Conference of STEM in Education, 26-27 Nov 2010, Brisbane, Australia.

McCarthy, A. C. and Hancock, N. H. and Raine, S. R. (2011) Real-time data requirements for model-based adaptive control of irrigation scheduling in cotton. Australian Journal of Multi-Disciplinary Engineering, 8 (2). pp. 189-206. ISSN 1448-8388

Brodie, Ian M. and Egodawatta, Prasanna (2011) Relationships between rainfall intensity, duration and suspended particle washoff from an urban road surface. Hydrology Research: an International Journal, 42 (4). pp. 239-249. ISSN 1998-9563

Palendeng, Mario Elvis (2011) Removing noise from electroencephalogram signals for BIS based depth of anaesthesia monitors. [Thesis (_PhD/Research)] (Unpublished)

Paudyal, Dev Raj and McDougall, Kevin and Apan, Armando (2011) Spatial data infrastructure convergence: building spatial data infrastructure bridges to address climate change. In: Joshi, P. K. and Singh, T. P., (eds.) Geoinformatics for climate change studies. Energy and Resources Institute, New Delhi, India, pp. 377-392. ISBN 978-81-7993-409-8

Lokuge, W. P. and Setunge, S. and Sanjayan, J. G. (2011) Stress-strain model for high strength concrete confined by FRP. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Durack, James M. (2011) Structural engineering design practice. [Thesis (_PhD/Research)] (Unpublished)

Karunasena, W. and Summerville, C. J. (2011) Structural performance of low grade timber slabs. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Khatri, Kanya L. and Smith, Rod (2011) Surface irrigation for energy and water use efficiency. In: Irrigation 2011: New Horizons, Fresh Ideas Regional Conference and Exhibition, 22-25 Aug 2011, Launceston, Australia.

Atkins, Debbie and Schmidt, Erik (2011) The cost of saving farm dam water. In: Irrigation 2011: New Horizons, Fresh Ideas Regional Conference and Exhibition, 22-25 Aug 2011, Launceston, Australia.

Banhazi, T. M. and Lewis, B. and Tscharke, M. (2011) The development and commercialisation aspects of a practical feed intake measurement instrumentation to be used in livestock buildings. Australian Journal of Multi-disciplinary Engineering, 8 (2). pp. 131-138. ISSN 1448-8388

Wang, H. and Kabir, M. M. and Lau, K. T. (2011) The effect of fibre chemical treatments on hemp reinforced composites. In: 18th International Conference on Composite Materials (ICCM-18), 21-26 Aug 2011, Jeju Island, Korea.

Manalo, A. C. and Aravinthan, T. and Karunasena, W. and Stevens, N. (2011) The effect of modulus of elasticity on the behaviour of railway turnout sleepers. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Epaarachchi, J. A. (2011) The effect of viscoelasticity on fatigue behaviour of polymer matrix composites. In: Guedes, Rui Miranda, (ed.) Creep and fatigue in polymer matrix composites. Woodhead Publishing Ltd, Cambridge, United Kingdom, pp. 492-513. ISBN 978 1 84569 656 6; eISBN 978-0-85709-043-0

Jensen, T. A. and Zeller, L. C. and Apan, A. A. (2011) The use of an unmanned aerial vehicle as a remote sensing platform in agriculture. Australian Journal of Multi-Disciplinary Engineering, 8 (2). pp. 139-146. ISSN 1448-8388

Banhazi, T. (2011) Treatment of airborne pollutants in livestock buildings with ozone as potential abatement option. Australian Journal of Multi-Disciplinary Engineering , 8 (2). pp. 147-156. ISSN 1448-8388

2010

McCarthy, Cheryl and Hancock, Nigel and Raine, Steven R. (2010) Apparatus and infield evaluations of a prototype machine vision system for cotton plant internode length measurement. Journal of Cotton Science, 14 (4). pp. 221-232. ISSN 1523-6919

Abd Rani, Mohd. Arif and Majid, Zulkepli and Yaakob, Omar and Chong, Albert (2010) Ship wake study using imaging technique. Geoinformation Science Journal, 10 (2). pp. 74-88. ISSN 1511-9491

Islam, Md Mainul and Kim, Ho Sung and Kabir, Mohammad Mazedul (2010) An overview on syntactic foam core and paper skin sandwich composites as potential building materials. In: 2010 International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2010), 23-24 Dec 2010, Khulna, Bangladesh.

Kabir, Mohammad Mazedul and Islam, Md Mainul and Wang, Hao (2010) Mechanical and thermal properties of untreated and chemically treated jute fibre reinforced composites. In: ICMIEE 2010: International Conference on Mechanical, Industrial and Energy Engineering , 23-24 Dec 2010, Khulna, Bangladesh.

Clarke, Jason and Wandel, Andrew P. and Mastorakos, E. (2010) Analysis of data to develop models for spray combustion. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Goh, Steven C. and Wang, Hao, eds. (2010) Proceedings of the 2010 Southern Region Engineering Conference (SREC 2010). Engineers Australia, Toowoomba, Australia.

Cardona, Francisco and Aravinthan, Thiru and Fedrigo, Jessica and Moscou, Clarisse (2010) Synthesis of phenolic bio-resins for advanced composites in civil engineering structures. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Chan, Auc Fai and Leis, John (2010) Median filtering simulation of bursty traffic. In: ICSPCS 2010: 4th International Conference on Signal Processing and Communication Systems, 13-15 Dec 2010, Gold Coast, Australia.

Sharifi, Behrooz and Leis, John (2010) Towards three-dimensional fusion of infrared guidance measurements for biopsy procedures: some preliminary results and design considerations. In: ICSPCS 2010: 4th International Conference on Signal Processing and Communication Systems, 13-15 Dec 2010, Gold Coast, Australia.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Followell, David and Birt, Peter and Canning, John and Stevenson, Michael (2010) An investigation of spectral response of embedded Fibre Bragg Grating (FBG) sensors in a hollow composite cylindrical beam under pure torsion and combined loading. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Australia.

Malpress, Ray and Buttsworth, David (2010) Assessment of an eccentric link in the connecting rod of a spark ignition engine intended for variable compression ratio operation. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Western Australia.

Sirimanna, Chamila S. and Islam, Md Mainul and Aravinthan, Thiru (2010) Effects of temperature on a pultruded FRP composite. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Western Australia.

Norman, Mark and Leis, John (2010) A passive approach to detection of traffic shaping. In: APSIPA 2010: 2nd Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, 14-17 Dec 2010, Biopolis, Singapore.

Low, Tobias and Manzanera, Antoine (2010) Ground-plane classification for robot navigation: combining multiple cues toward a visual-based learning system. In: ICARCV 2010: 11th International Conference on Control, Automation, Robotics and Vision , 7-10 Dec 2010, Singapore.

Jokic, Michael D. and Wandel, Andrew P. and Kist, Alexander A. (2010) Which version art thou? Configuration management in engineering education. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Dowling, David (2010) A review of para-professional engineering education in Australia: exploring the VET-HE divide. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Bowtell, L. A. and Ahfock, A. L. (2010) Dynamic analysis of a DC offset controller for grid-connected inverters. In: AUPEC 2010: Power Quality for the 21st Century , 5-8 Dec 2010, Christchurch, New Zealand.

Basnet, Badri Bahadur and Brodie, Lyn and Worden, John (2010) Enhanced feedback - does peer assessment achieve this goal? In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Dowling, David (2010) The career aspirations and other characteristics of Australian para-professional engineering students. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Burgess, R. and Ahfock, A. (2010) The use of arc-suppression coils in power systems with open-delta regulators. In: AUPEC 2010: Power Quality for the 21st Century, 5-8 Dec 2010, Christchurch, New Zealand.

Sharifian, Ahmad (2010) An experimental study of wind force acting on commercial double-layered square metal screens at different spacing. In: 17th Australasian Fluid Mechanics Conference (AFMC 2010), 5-9 Dec 2010, Auckland, New Zealand.

Marwan, Marwan and Kamel, Fouad (2010) Demand-side response load management modelling encountering electrical peak demands in Eastern and Southern Australia: smart grid tools. In: AUPEC 2010: Power Quality for the 21st Century, 5-8 Dec 2010, Christchurch, New Zealand.

Zhou, Hong and Goh, Steven C. and Worden, John and Tschirpig, Barry and Yong, Andrew and Brodie, Lyn (2010) Development of a customised software module within the Moodle LMS for team-based PBL courses. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Saleh, Khalid and Buttsworth, David and Yusaf, Talal (2010) Development of a small icing wind tunnel for simulating the initial stages of solid phase ice accretion. In: 17th Australasian Fluid Mechanics Conference (AFMC 2010), 5-9 Dec 2010, Auckland, New Zealand.

Aravinthan, Thiru (2010) Incorporating a variety of assessment tools in a web-based postgraduate course developed for practicing engineers. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Gibbings, Peter and Godfrey, Elizabeth and King, Robin and Wandel, Weide (2010) Part time study distorts student attrition rates in engineering programs. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Widodo, A. S. and Buttsworth, D. R. (2010) Stagnation temperature measurements in the USQ hypersonic wind tunnel. In: 17th Australasian Fluid Mechanics Conference (AFMC 2010), 5-9 Dec 2010, Auckland, New Zealand.

Abdulla, Shahab and Wen, Peng and Xiang, Wei (2010) The design and investigation of model based internal model control for the regulation of hypnosis. In: IEEE/NANOMED 2010: Promoting Good Health with Nanotechnology, 5-9 Dec 2010, Hong Kong, China.

Supeni, E. E. and Yusaf, Talal and Wandel, Andrew P. and Buttsworth, David R. and Noor, M. M. (2010) Experimental and modeling investigation of the performance characteristics on diesel HCCI with hydrogen additive - a review. In: 2nd National Conference in Mechanical Engineering Research and Postgraduate Studies, 3-4 Dec 2010, Kuantan, Pahang, Malaysia.

Marwan, Marwan and Kamel, Fouad and Xiang, Wei (2010) A demand-side response smart grid scheme to mitigate electrical peak demands and access renewable energy sources. In: 48th Annual Conference of the Australian Solar Energy Society: Bringing Business and Research Together for a Better Tomorrow (Solar2010), 1-3 Dec 2010, Canberra, ACT, Australia.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Canning, John (2010) Effects of the self distortions of embedded FBG sensors on spectral response due to torsional and combined loads. In: 3rd Asia-Pacific Workshop on Structural Health Monitoring, 30 Nov-2 Dec 2010, Tokyo, Japan.

Kamel, Fouad (2010) Life-time cost-benefit analysis of solar energy systems in Queensland. In: 48th Annual Conference of the Australian Solar Energy Society: Bringing Business and Research Together for a Better Tomorrow (Solar2010), 1-3 Dec 2010, Canberra, ACT, Australia.

Goh, Steven C. and Jokic, Michael D. and Hartle, Todd (2010) A new engineering management master to address the personal, professional and educational needs of engineering graduates to achieve EA chartered status. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2010) A review of current development in natural fiber composites for structural and infrastructure applications. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Islam, Md Mainul and Aravinthan, Thiru (2010) Behaviour of structural fibre composite sandwich panels under point load and uniformly distributed load. Composite Structures, 93 (1). pp. 206-215. ISSN 0263-8223

Kist, Alexander A. (2010) Building blocks for flexible and engaging learning environments. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Landers, Richard and Wen, Peng and Pather, Selvan (2010) Depth of anaesthesia: measuring or guessing? In: IEEE/NANOMED 2010: Promoting Good Health with Nanotechnology, 5-9 Dec 2010, Hong Kong, China.

Devine, Jo and Kimmins, Lindy (2010) Developing a learning community to support student learning in a first year statics course. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Cardona, F. and Ku, H. and Chouzenoux, L. (2010) Effect of tannin on flexural properties of phenol formaldehyde glycerol reinforced composites: preliminary results. Journal of Reinforced Plastics and Composites, 29 (24). pp. 3543-3553. ISSN 0731-6844

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Warna (2010) Evaluation of the strength and stiffness of glue-laminated fibre composite sandwich panels for structural beam application. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Western Australia.

Zhuge, Yan and Mills, Julie E. (2010) Identifying the issues of team project work for distance education students: a case study in civil engineering. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Kist, Alexander A. and Gibbings, Peter (2010) Inception and management of remote access laboratory projects. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Aravinthan, T. and Heldt, T. (2010) Innovative strengthening technique using post-tensioned fibre composite wraps for bridge headstocks. Australian Journal of Structural Engineering, 11 (2). pp. 117-128. ISSN 1328-7982

Ku, H. S-L. and Mustapha, U. and Goh, S. (2010) Literature review of past and present performance of Nigerian manufacturing sector. In: IMechE 2010: Institution of Mechanical Engineers.

Perera, Kithsiri and Herath, Srikantha and Apan, Armando and Samarakoon, Lal (2010) Mapping Mekong land cover at 250m resolution without in situ observations. Asian Journal of Geoinformatics, 10 (4). pp. 31-41. ISSN 1513-6728

Zhou, Yuan and Hou, Chunping and Xiang, Wei (2010) Modeling of transmission distortion for multi-view video in packet lossy networks. In: GLOBECOM 2010: IEEE Global Telecommunications Conference, 6-10 Dec 2010, Miami, FL, USA.

Zhao, Yong-Qing and Lau, Kin-Tak and Kim, Jang-Kyo and Xu, Cai-Ling and Zhao, Dan-Dan and Li, Hu-Lin (2010) Nanodiamond/poly (lactic acid) nanocomposites: effect of nanodiamond on structure and properties of poly (lactic acid). Composites Part B: Engineering, 41 (8). pp. 646-653. ISSN 1359-8368

Brodie, L. and Jolly, L. (2010) Providing ongoing just in time professional development in engineering education. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Goh, Steven C. and Worden, John and Zhou, Hong and Clewett, John (2010) Revitalisation of a 2nd level engineering and spatial science PBL course: almost there but... In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Koech, Richard K. and Gillies, Malcolm H. and Smith, Rod (2010) Simulation modelling in surface irrigation systems. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Hasna, Abdallah M. (2010) Sustainability classifications in engineering: discipline and approach. International Journal of Sustainable Engineering, 3 (4). pp. 258-276. ISSN 1939-7038

Karunasena, Warna (2010) The effect of debonding on the natural frequencies of laminated fibre composite sandwich plates. In: 6th Australasian Congress on Applied Mechanics (ACAM 6) , 12-15 Dec 2010, Perth, Western Australia.

Maraseni, Tek Narayan and Chen, Guangnan and Guangren, Qian (2010) Towards a faster and broader application of biochar: appropriate marketing mechanisms. International Journal of Environmental Studies, 67 (6). pp. 851-860. ISSN 0020-7233

Yousif, B. F. and El-Tayeb, N. S. M. (2010) Wear characteristics of thermoset composite under high stress three-body abrasive. Tribology International, 43 (12). pp. 2365-2371. ISSN 0301-679X

Palendeng, Mario Elvis and Wen, Peng and Goh, Steven C. (2010) Investigation of bispectral index filtering and improvement using wavelet transform adaptive filter. In: NANOMED 2010: IEEE International Conference on Nano/Molecular Medicine and Engineering , 5-9 Dec 2010, Hong Kong/Macau, China.

Tavakkoli, Ehsan and Jones, Ben and Coventry, Stewart and Rengasamy, Pichu and McDonald, Glenn (2010) On-farm assessment of sub-soil salinity and sodicity constraints to barley production in southern Australia. In: 15th Australian Agronomy Conference: Food Security from Sustainable Agriculture (ASA 2010), 15-18 Nov 2010, Lincoln, New Zealand.

Epaarachchi, Jayantha A. and Rathnaweera, Gayan and Canning, John and Stevenson, Michael (2010) Response Fibre Bragg Grating (FBG) strain sensors embedded at different locations through the thickness around a delamination in a composite lamina. In: 7th Asian-Australasian Conference on Composites (ACCM7), 15-18 Nov 2010, Taipei, Taiwan.

Stuckey, Nick and Pittaway, Pam and Larsen, Kim (2010) Photodegradation of Australian freshwater microlayers. In: 6th Asian Photochemistry Conference 2010, 14-18 Nov 2010, Wellington, New Zealand.

Al-Juboori, Raed and Aravinthan, Vasantha and Yusaf, Talal (2010) A review of common and alternative methods for disinfection of microorganisms in water. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Allwayzy, S. H. and Yusaf, T. and McCabe, B. and Pittaway, P. and Aravinthan, V. (2010) Microalgae as alternative fuel for compression ignition (CI) Engines. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2010) Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Hairuddin, A. Aziz and Wandel, Andrew P. and Yusaf, Talal (2010) Hydrogen and natural gas comparison in diesel HCCI engines -a review. In: 2010 Southern Region Engineering Conference (SREC2010), 11-12 Nov 2010, Toowoomba, Australia.

Malpress, Ray and Buttsworth, David (2010) Internal combustion engines: a role to fill for transport in an energy conscious environment. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Huweg, Abdurrahman F. S. and Kamel, Fouad and Raine, Steven (2010) Investigating the effect of electro-osmosis on sandy soil near saturated conditions. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Ku, Harry S. and Goh, Steven C. (2010) Preliminary results on literature review skills of students doing capstone projects. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Queensland, Australia.

Somasundaraswaran, Kathirgamalingam (2010) The road safety: a special sign for unfamiliar drivers. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Kamel, Fouad and Baguley, Margaret and Thorpe, David (2010) Assessment of how engaging in teaching may enhance the learning journey of engineering students. In: 2010 Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2010) Investigation of frequency characteristics of GFRP/phenolic sandwich beams. In: 2010 Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

Marwan, Marwan and Kamel, Fouad (2010) User-controlled electrical energy consumption towards optimized usage of electricity infrastructure. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia .

Mai-Duy, Nam and Tran-Cong, Thanh (2010) A numerical study of 2D integrated RBFNs incorporating Cartesian grids for solving 2D elliptic differential problems. Numerical Methods for Partial Differential Equations, 26 (6). pp. 1443-1462. ISSN 0749-159X

Guades, Ernesto Jusayan and Aravinthan, Thiru and Islam, Md Mainul (2010) An overview on the application of FRP composites in piling system. In: 2010 Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Queensland, Australia.

Koech, R. K. and Smith, R. J. and Gillies, Malcolm H. (2010) Automation and control in surface irrigation systems: current status and expected future trends. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Craig, Ian and Thorpe, David and Kamel, Fouad and Goh, Steven C. (2010) Concentrating solar power: parabolic trough with 20% gas boost (CSP-PT+20%). In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Walter, Nathan Johan (2010) Development of a bridge asset management plan for Southern Downs Regional Council. [USQ Project] (Unpublished)

Sharifian, Ahmad and Buttsworth, David (2010) Double-layered metal mesh screens to contain or exclude thermal radiation from bush fires. Journal of Fire Protection Engineering, 20 (4). pp. 291-311. ISSN 1042-3915

Aldraho, Abdelnour and Kist, Alexander A. (2010) Enhanced heuristics to reduce power consumption of networks using weight setting. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Kennedy, Jotham Ariel (2010) Experimental investigation into the uplift capacity of ground anchors in sand. [USQ Project] (Unpublished)

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Douglas, Steven (2010) Fibre composite sandwich beam: an alternative to railway turnout sleeper? In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Zhuge, Y. (2010) FRP-retrofitted URM walls under in-plane shear: review and assessment of available models. Journal of Composites for Construction, 14 (6). pp. 743-753. ISSN 1090-0268

Aldraho, Abdelnour and Kist, Alexander A. (2010) Heuristics for dynamic topologies to reduce power consumption of networks. In: ATNAC 2010: Australasian Telecommunication Networks and Applications Conference, 31 Oct-3 Nov 2010, Auckland, New Zealand.

Bowtell, Leslie (2010) Power quality and efficiency improvements for transformerless grid connected PV inverters. [Thesis (_PhD/Research)] (Unpublished)

Smith, R. J. and Baillie, J. N. and McCarthy, A. C. and Raine, S. R. and Baillie, C. P. (2010) Review of precision irrigation technologies and their application. Project Report. National Centre for Engineering in Agriculture, Toowoomba, Australia.

Slack–Smith, David (2010) Structural design, quotation and production support using parametric CAD tools and national/international standards for fluid storage systems. [USQ Project] (Unpublished)

Wang, Hao (2010) Sustainable materials research at USQ. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Haenke, Michael (2010) The development of a wind and solar power calculator for use within the private sector. [USQ Project] (Unpublished)

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Aravinthan, Thiru (2010) The developments of structural health/integrity monitoring systems using FBG sensors at CEEFC of USQ. In: 2010 Southern Region Engineering Conference (SREC 2010) , 11-12 Nov 2010, Toowoomba, Australia.

Chin, C. W. and Yousif, B. F. (2010) Tribological behaviour of KFRE composite. International Journal of Modern Physics B, 24 (28). pp. 5589-5599. ISSN 0217-9792

Tawfik, Qaidar and Karunasena, Warna (Karu) (2010) Use of CFRP for rehabilitation of steel structures: a review. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Basnet, Badri and Brodie, Lyn and Worden, John (2010) Peer assessment of assignment. In: FIE 2010: Celebrating 40 Years of Innovation , 27-30 Oct 2010, Washington, DC. United States.

Kamel, Fouad and Baguley, Margaret and Thorpe, David (2010) Work in progress - assessment of how engaging in teaching may enhance the learning journey of engineering and education students. In: FIE 2010: Celebrating 40 Years of Innovation , 27-30 Oct 2010, Washington, DC. United States.

Banerjee, S. and Battley, M. and Bhattacharyya, D. (2010) Shear strength optimization of reinforced honeycomb core materials. Mechanics of Advanced Materials and Structures, 17 (7). pp. 542-552. ISSN 1537-6494

Tran, Canh-Dung and Smith, Shaun M. and Higgerson, G. and Bui, Anh and Randeniya, Lakshman K. and Tran-Cong, Thanh (2010) Spinning CNT based composite yarns using a dry spinning process. In: 2010 International Conference on Nanoscience and Nanotechnology (ICONN 2010), 22-26 Feb 2010, Sydney, Australia.

Smith, B. (2010) A biomechanical analysis for improved ergonomics in metal detector products using trajectory optimisation. [USQ Project] (Unpublished)

Khan, Shahbaz and Mushtaq, Shahbaz and Chen, Charlie (2010) A decision support tool for irrigation infrastructure investments. Irrigation and Drainage, 59 (4). pp. 404-418. ISSN 1531-0353

Cox, Jeremy Neil (2010) Advantages and practicality of using a 2D hydrodynamic model in comparison to a 1D hydrodynamic model in a flood prone area. [USQ Project] (Unpublished)

Rowlings, David Selwyn (2010) An experimental and theoretical investigation of side weirs. [USQ Project] (Unpublished)

Nguyen-Ky, T. and Wen, Peng and Li, Yan (2010) An improved detrended moving-average method for monitoring the depth of anesthesia. IEEE Transactions on Biomedical Engineering, 57 (10). pp. 2369-2378. ISSN 0018-9294

Skipworth, Julian (2010) An investigation and quantitative analysis of the impacts on stream flow and fluvial erosion associated with urbanisation of a small catchment. [USQ Project] (Unpublished)

Weyman-Jones, Ashley (2010) An investigation into the accuracy and limitations of automatic target recognition in total stations. [USQ Project] (Unpublished)

Stanley, Matthew (2010) An investigation into the Australian height datum on Ballina Island. [USQ Project] (Unpublished)

Madden-Holmes, Ben (2010) An investigation into the legislative changes affecting tidal boundaries in Queensland. [USQ Project] (Unpublished)

Assiriyage, Buddhi Nuwan Lanka (2010) An investigation of aluminium/eproxy particulate composite system - impact/long-term behavior. [USQ Project] (Unpublished)

Shaw, Mark Andrew (2010) An investigation of roles and development pattern of regional airports, Queensland Australia. [USQ Project] (Unpublished)

Klibbe, Christopher Aaron (2010) An investigation on the high water mark as a land boundary. [USQ Project] (Unpublished)

Alenazi, Saud Khlaif K. (2010) Analysis and taxonomy of network quality of service (QoS) concepts in the long term evolution/system architecture evolution (LTE/SAE) System. [USQ Project] (Unpublished)

Clarke, Jason (2010) Analysis of data to develop models for spray combustion. [USQ Project] (Unpublished)

Palmer, Matthew Alan (2010) Analysis of the feasibility of a 3D model for use in civil construction (creating a 3D model for the first span of a bridge). [USQ Project] (Unpublished)

Aravinthan, Vasantha and Worden, John (2010) Animations as a tool for enhancing teaching and learning outcomes in civil engineering courses. In: FIE 2010: Celebrating 40 Years of Innovation, 27-30 Oct 2010, Washington, DC. United States.

Coe, Daniel (2010) Asset management for Tamworth Regional Council’s sewer network. [USQ Project] (Unpublished)

Stanton, Dale John (2010) Atterberg limits and their relationship to longitudinal cracking in granular pavements. [USQ Project] (Unpublished)

Walker, Cameron (2010) Automated soil compaction machine for the preparation of Califorian bearing ratio and proctor specimens. [USQ Project] (Unpublished)

Di Bella, Robert Michael (2010) Biogas generation from an anaerobic pond 'abattoir'. [USQ Project] (Unpublished)

Mowat, David (2010) Callide C Power Station's generator protection system 'ride through capabilities' for various external faults. [USQ Project] (Unpublished)

Donald, Michael Craig (2010) Comparative properties of epoxy/sawdust composites with palm oil cured by microwave and thermal treatment. [USQ Project] (Unpublished)

Fahey, Lawrence John (2010) Decision support system for assessing the benefits of incorporating swabbing facilities into water pipelines. [USQ Project] (Unpublished)

Lewers, Glyn Alan (2010) Design of a frame/structure for a large wastewater treatment pond. [USQ Project] (Unpublished)

Perry, Ramon (2010) Design of a small wind turbine for a rural community in Australia. [USQ Project] (Unpublished)

Miller, Justin (2010) Design of a wireless acquisition system for a digital stethoscope. [Thesis (_PhD/Research)]

Daly, James (2010) Design, construction and performance of buildings foundations on soft clays in the Brisbane region. [USQ Project] (Unpublished)

Brooks, Simon (2010) Development and testing of a networked PC power management tool. [USQ Project] (Unpublished)

Gibbons, Anthony (2010) Development of a laser pointer mouse. [USQ Project] (Unpublished)

Wilson, Bede (2010) Development of an unmanned aerial vehicle for use during disaster situations. [USQ Project] (Unpublished)

Tai, Ping (2010) Dielectric, thermal and mechanical properties of sawdust reinforced epoxy composites post-cured in microwaves. [USQ Project] (Unpublished)

Martin, Joseph A. (2010) Driving problems encountered in the UAE by newly arrived expatriates and tourists. [USQ Project] (Unpublished)

Caunce, Catherine May (2010) Effective road pavement design for expansive soils in Ipswich. [USQ Project] (Unpublished)

Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275

Goh, Steven and Bullen, Frank (2010) Engineering management education post GFC and Copenhagen: are we on the right track? In: FIE 2010: Celebrating 40 Years of Innovation, 27-30 Oct 2010, Arlington, VA. United States.

Bailey, Thomas Sullivan (2010) Environmentally friendly natural waste materials for use in civil structures. [USQ Project] (Unpublished)

Gibson, David Eric (2010) Evaluating comparative performance of various shaped bridge piers: experimental investigation of sediment transport and scouring. [USQ Project] (Unpublished)

Gould, Adam Mark (2010) Finite volume solution of the unsteady free surface flow equations. [USQ Project] (Unpublished)

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) Flexural behaviour of glue-laminated fibre composite sandwich beams. Composite Structures, 92 (11). pp. 2703-2711. ISSN 0263-8223

Philips, Cameron Charles MacGregor (2010) Gladstone Power Station demineralised water plant asset strategy development. [USQ Project] (Unpublished)

Commons-Fidge, Ian G. (2010) Grinding mill conceptual design developments. [USQ Project] (Unpublished)

Smith, R. J. and Gillies, M. H. (2010) Head ditch hydraulics and the variability of inflows to irrigation furrows. Irrigation and Drainage, 59 (4). pp. 442-452. ISSN 1531-0353

Tavakkoli, Ehsan and Rengasamy, Pichu and McDonald, Glenn (2010) High concentrations of Na+ and Cl- ions in soil solution have simultaneous detrimental effects on growth of faba bean under salinity stress. Journal of Experimental Botany, 61 (15). pp. 4449-4459. ISSN 0022-0957

Coggan, Robert Walter (2010) High impedance earth fault modelling. [USQ Project] (Unpublished)

Pufelski, Nadine (2010) How effective is microalgae treatment of different wastewaters for simultaneous nutrient removal and lipid production for bio-fuel? [USQ Project] (Unpublished)

Hanson, Scott (2010) Improvement and performance of pavement gravels used by Toowoomba Regional Council for unsealed roads. [USQ Project] (Unpublished)

Grygorcewicz, Jon-Paul Frederick (2010) Improvement of hydrocarbon dew point determination via gas chromatography. [USQ Project] (Unpublished)

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) In-plane shear behaviour of fibre composite sandwich beams using asymmetrical beam shear test. Construction and Building Materials, 24 (10). pp. 1952-1960. ISSN 0950-0618

Baker, Stuart (2010) Induced draft (ID) fan lubrication system design review and proposed modification upgrade at Callide C Power Station. [USQ Project] (Unpublished)

Jordan, Timothy J. (2010) Intrusion and anomaly detection in computer networks using signal processing approaches. [USQ Project] (Unpublished)

Malvern, Jerome Liam (2010) Investigation of high impact capacity composite material for civil infrastructure. [USQ Project] (Unpublished)

Zanetti, Ashley (2010) Investigation of pavement design for low volume rural roads. [USQ Project] (Unpublished)

Muller, Zach Anthony (2010) Investigation of solar thermal energy alternatives and their applications to water heating and air cooling in the meat processing industry. [USQ Project] (Unpublished)

Bullen, Frank and Gibbings, Peter and Brodie, Lyn (2010) Leading engineering learning and teaching in Australia. In: FIE 2010: Celebrating 40 Years of Innovation , 27-30 Oct 2010, Washington, DC. United States.

Barnett, Paul Jonathan (2010) Life cycle assessment (LCA) of liquefied natural gas (LNG) and its environmental impact as a low carbon energy source. [USQ Project] (Unpublished)

Magarry, Anthony John (2010) Management of physical assets – advanced asset management planning. [USQ Project] (Unpublished)

Huntley, Matthew Mark (2010) Mapping cycling pathways and route selection using GIS and GPS. [USQ Project] (Unpublished)

Mohd Ariff, M. Farid M. and Majid, Zulkepli and Setan, Halim and Chong, Albert K.-F. (2010) Near-infrared camera for night surveillance applications. Geoinformation Science Journal, 10 (1). pp. 38-48. ISSN 1511-9491

Elphinstone, Aaron Daniel (2010) Optimisation of pigging infrastructure in design. [USQ Project] (Unpublished)

Abeysekera, Vasantha (2010) Output characteristics of 'Chapparu' brickwork. Engineer: Journal of the Institution of Engineers, Sri Lanka, 43 (4). pp. 57-74. ISSN 1800-1122

Davies, Neil (2010) Pedestrian characteristics and control for the Toowoomba city centre master plan area. [USQ Project] (Unpublished)

Gelding, Peter William (2010) Prioritising locations for investment based on threats to reptiles and ecosystems within the Condamine Catchment. [USQ Project] (Unpublished)

Bishop, Damon Thomas (2010) Pump gland improvement project. [USQ Project] (Unpublished)

Frazer, Peter (2010) Relational contracting – investigation of relational contracting behaviours across various project delivery models. [USQ Project] (Unpublished)

Piok, Dhieu Magot (2010) Remotely accessible 35 kVA diesel backup generator. [USQ Project] (Unpublished)

Zhao, Yong-Qing and Cheung, Hoi-Yan and Lau, Kin-Tak and Xu, Cai-Ling and Zhao, Dan-Dan and Li, Hu-Lin (2010) Silkworm silk/poly(lactic acid) biocomposites: dynamic mechanical, thermal and biodegradable properties. Polymer Degradation and Stability, 95 (10). pp. 1978-1987. ISSN 0141-3910

Jones, Simon (2010) Stop-go mobile mapping. [USQ Project] (Unpublished)

Bajracharya, Rohan Muni (2010) Structural evaluation of concrete-expanded polystyrene sandwich panels for slab applications. [USQ Project] (Unpublished)

Turner, Alan (2010) Structural performance of cross laminated timber panels as walls. [USQ Project] (Unpublished)

Nawratzki, Guy (2010) Suspension development for a short circuit racing car. [USQ Project] (Unpublished)

Pola, Nigel Peter (2010) Synthesis of modified phenolic resins using renewable materials for advanced composites in civil engineering structures. [USQ Project] (Unpublished)

Cameron, Kirsty (2010) Technical feasibility of a salinity trading scheme for the licensing of coal mine discharges in the Fitzroy Basin. [USQ Project] (Unpublished)

Boh, Tjasa and Billingsley, John and Bradbeer, Robin S. and Hodgson, Paul (2010) Terramechanics based traction control of underwater wheeled robot. In: OCEANS 2010: Showcasing Advances in Marine Science and Engineering, 24-27 May 2010, Sydney, Australia.

Kiongoli, Said (2010) Testing the accuracy of machine guidance in road construction. [USQ Project] (Unpublished)

Marstella, Joseph Edward (2010) The concept, analysis and critical thinking involved in flow net theory - a project based learning approach using cofferdams. [USQ Project] (Unpublished)

Morrison, Scott James (2010) The development and testing of a high precision ellipsoidal - Australian height datum deformation grid for real time GPS applications. [USQ Project] (Unpublished)

Kirkland, Rhys (2010) The development of a small scale gas turbine to assist in the analysis of coal seam gas as an alternative stationary jet fuel for Australia. [USQ Project] (Unpublished)

Millers, Paul Gordon (2010) The effects of small distributed generation on the electrical distribution network. [USQ Project] (Unpublished)

Day, Michael Peter (2010) The implications regional ecosystem mapping has on land development proposals in rural Queensland. [USQ Project] (Unpublished)

Harch, Brian Joseph Luke (2010) The investigation into the optimisation of cross laminated timber panels for use in the Australia building industry. [USQ Project] (Unpublished)

Seccombe, Andrew James (2010) The use of Fibre Bragg Grating (FBG) sensors in geotechnical applications. [USQ Project] (Unpublished)

Somasundaraswaran, Kathirgamalingam and Bullen, Frank and Ayers, Ron (2010) The use of road safety target setting in fatality and injury reduction. In: 24th Australian Road Research Board Conference (ARRB 2010) , 12-15 Oct 2010, Melbourne, Australia.

Yousif, B. F. and Nirmal, Umar and Wong, K. J. (2010) Three-body abrasion on wear and frictional performance of treated betelnut fibre reinforced epoxy (T-BFRE) composite. Materials and Design, 31 (9). pp. 4514-4521. ISSN 0264-1275; 0261-3069

Downing, Matthew (2010) Upon the construction of a remote controlled tracked reconnaissance vehicle. [USQ Project] (Unpublished)

Duncan, Jeremy Bruce (2010) USB camera pedestrian counting. [USQ Project] (Unpublished)

Aravinthan, Vasantha (2010) Work in progress - challenges in designing an assessment scheme for a diverse cohort of students. In: FIE 2010: Celebrating 40 Years of Innovation, 27-30 Oct 2010, Washington, DC. United States.

Buttsworth, David R. (2010) Ludwieg tunnel facility with free piston compression heating for supersonic and hypersonic testing. In: 9th Australian Space Science Conference, 28-30 Sept 2009, Sydney, Australia.

Pittaway, Pam (2010) Will artificial monolayers adversely affect water quality? Insights from twelve months of monitoring with no monolayer. In: 2nd Urban Water Security Research Alliance Science Forum and Stakeholder Engagement, 28-29 Sept 2010, Brisbane, Australia.

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2010) Cost optimum design of structural fibre composite sandwich panel for flooring applications. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2010) Temperature effects on full scale FRP bridge using innovative composite components. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

Islam, Md Mainul and Kim, Ho Sung (2010) Manufacturing and behaviour of sandwich composites made of starch as binder for core and adhesive between core and skins. In: 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010), 24-26 Sept 2010, Kottayam, Kerala, India.

Ahmed, Mansur and Islam, Md Saiful and Ahsan, Qumrul and Islam, Md Mainul (2010) Physical and tensile properties of raw and treated silk fibres. In: 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010), 24-26 Sept 2010, Kottayam, Kerala, India.

Aravinthan, Thiru (2010) Challenges in the design and delivery of an online postgraduate course in fibre composites. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

Ku, H. and Trada, M. and Huq, R. (2010) A pilot study on the flexural properties of vinyl ester composites filled with glass powder. In: MFMS 2010: 3rd International Conference on Multi-Functional Materials and Structures, 14-18 Sep 2010, Jeonju, South Korea.

Thorpe, David and Zhuge, Yan (2010) Advantages and disadvantages in using permeable concrete as a pavement construction material. In: ARCOM 2010: 26th Annual Conference of the Association of Researchers in Construction Management, 6-8 Sep 2010, Leeds, United Kingdom.

Liu, Xiaoye and Zhang, Zhenyu (2010) Extracting drainage network from high resolution DEM in Toowoomba, Queensland. In: Queensland Surveying and Spatial Conference 2010 (QSSC 2010), 1-3 Sept 2010, Brisbane, Australia.

Simmons, Shane and McClelland, Paul (2010) Boundary repair issues as a means to resolving an uncertain boundary area - the occupational hazard of Yarradale and Gracemere Streets, Brisbane. In: Queensland Surveying and Spatial Conference 2010 (QSSC 2010), 1-3 Sept 2010, Brisbane, Australia.

Campbell, Glenn (2010) A review of the quality of reinstatement in Queensland survey plans and identification plans. In: Queensland Surveying and Spatial Conference 2010 (QSSC 2010), 1-3 Sept 2010, Brisbane, Queensland.

Perera, Kithsiri and Moore, David and Apan, Armando and McDougall, Kevin (2010) Applying the global standard FAO LCCS to map rural Queensland land cover. In: Queensland Surveying and Spatial Conference 2010 (QSSC 2010), 1-3 Sept 2010, Brisbane, Queensland.

Bowtell, L. and Ahfock, A. (2010) Direct current offset controller for transformerless single-phase photovoltaic grid-connected inverters. IET Renewable Power Generation, 4 (5). pp. 428-437. ISSN 1752-1416

Yousif, B. F. (2010) Effect of oil palm fibres volume fraction on mechanical properties of polyester composites. International Journal of Modern Physics B, 24 (23). pp. 4459-4470. ISSN 0217-9792

McCarthy, Alison and Hancock, Nigel and Raine, Steven (2010) Holistic control system design for large mobile irrigation machines. In: M2VIP 2010: Annual Conference on Mechatronics and Machine Vision in Practice, 22-24 Jun 2010, Darussalam, Brunei.

Parsons, David (2010) Home heating in temperate Australia. International Journal of Life Cycle Assessment , 15 (8). pp. 785-793. ISSN 0948-3349

Ran, Jie and Wang, Yafeng and Li, Chang and Yang, Dacheng and Xiang, Wei (2010) Joint power allocation and best-relay positioning for incremental selection amplify-and-forward relaying. In: 2010 IEEE Vehicular Technology Conference (VTC 2010-Fall), 6-9 Sept 2010, Ottawa, Canada.

Chong, Albert K. and Ariff, M. Farid M. and Setan, Halim and Majid, Zulkepli (2010) Night-time surveillance system for forensic 3D mapping. In: CISP 2010: 3rd International Congress on Image and Signal Processing , 16-18 Oct 2010, Yantai, China.

Perera, Kithsiri (2010) Production of semi real time media-GIS contents using MODIS imagery. In: Queensland Surveying and Spatial Conference 2010 (QSSC 2010), 1-3 Sept 2010, Brisbane, Australia.

Lau, Kin-Tak (2010) Recent research trend in marine engineering materials (Keynote lecture). In: 160th Eastern Forum of Sciences and Technology , 20-21 Sep 2011, Shanghai, China. (Unpublished)

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Warna (2010) Shear behavior of glue-laminated composite sandwich beams. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

Lucas, Richard and Bunting, Peter and Armston, John and Lee, Alex and Campbell, Glenn (2010) The Injune landscape collaborative project: an update on research activities. In: 15th Australasian Remote Sensing and Photogrammetry Conference, 13-17 Sept 2010, Alice Springs, Northern Territory.

Mustapha, Umar (2010) The role of product design, manufacturing systems and environmental uncertainty in the Nigerian manufacturing organizations. [Thesis (_PhD/Research)] (Unpublished)

Randeniya, Lakshman K. and Bendavid, Avi and Martin, Philip J. and Tran, Canh-Dung (2010) Composite yarns of multi-walled carbon nanotubes with metallic electrical conductivity. Small, 6 (16). pp. 1806-1811. ISSN 1613-6810

Padhi, Jyotiprakash and Payero, Jose and Misra, R. K. (2010) Measuring the effect of water stress on wheat evapotranspiration. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-10 June 2010, Sydney, Australia.

Padhi, Jyotiprakash and Misra, R. K. and Payero, Jose (2010) Prospects of using infrared thermography for irrigation scheduling of wheat crop. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-10 June 2010, Sydney, Australia.

Wang, Gengkun and Xiang, Wei and Leis, John and Wang, Yafeng (2010) Design of a wireless portable vibration acquisition and analysis instrument. In: 2010 IEEE International Conference on Wireless Communications, Networking and Information Security (WCNIS 2010), 25-27 Jun 2010, Beijing, China.

Perera, Kithsiri and Herath, Srikantha and Apan, Armando and Lal, Samarakoon (2010) Application of Modis 250m images without in situ observations for mapping Mekong River Basin land cover. In: ISPRS Technical Commission VIII Symposium 2010, 9-12 Aug 2010, Kyoto, Japan.

Simmons, Shane (2010) Articulating from New South Wales TAFE to the University of Southern Queensland and professional registration as a mine surveyor. Azimuth, 49 (7). pp. 30-31. ISSN 0728-4586

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna (2010) Behaviour of structural glulam beams from sustainable fibre composite sandwich panels. In: 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference (CECAR5 and ASEC2010): Innovative Community Building, 8-12 Aug 2010, Sydney, Australia.

Hussain, Amjed and Raine, Steven R. (2010) Can electromagnetic induction be used to evaluate sprinkler irrigation uniformity for a shallow rooted crop? In: WCSS 2010: Solutions for a Changing World, 1-6 Aug 2010, Brisbane, Australia.

Aravinthan, Thiru and Manalo, Allan and Douglas, Steve (2010) Development of a fibre composite turnout sleeper. In: 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference (CECAR5 and ASEC2010): Innovative Community Building, 8-12 Aug 2010, Sydney, Australia.

Ku, H. and Cardona, F. and Rogers, D. and Munoz, J.-C. (2010) Development of polymer network of phenolic and epoxies resins mixed with linseed oil: pilot study. Journal of Materials Engineering and Performance, 19 (6). pp. 912-919. ISSN 1059-9495

Uddin, Jasim and Smith, Rod and Hancock, Nigel and Foley, Joseph P. (2010) Droplet evaporation losses during sprinkler irrigation: an overview. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-11 Jun 2010, Sydney, Australia.

McCarthy, Alison (2010) Improved irrigation of cotton via real-time, adaptive control of large mobile irrigation machines. [Thesis (_PhD/Research)] (Unpublished)

Chong, Albert K.-F. and Newsham-West, Richard and Milburn, Peter (2010) It’s looking up! 3D mapping of foot surface contours. In: WCB 2010: 6th World Congress of Biomechanics, 1-6 Aug 2010, Singapore.

Perera, Kithsiri and Moore, David and Tateishi, Ryutaro and Apan, Armando and McDougall, Kevin (2010) Mapping Queensland land cover according to FAO LCCS using multi-source spatial data. In: ISPRS 2010: Technical Commission VIII Symposium 2010, 9-12 Aug 2010, Kyoto, Japan.

Ghabraie, Kazem and Chan, Ricky and Huang, Xiaodong and Xie, Yi Min (2010) Shape optimization of metallic yielding devices for passive mitigation of seismic energy. Engineering Structures, 32 (8). pp. 2258-2267. ISSN 0141-0296

Nawi, Nazmi Mat and Chen, Guangnan and Zare, Dariush (2010) The effect of different climatic conditions on wheat harvesting strategy and return. Biosystems Engineering, 106 (4). pp. 493-502. ISSN 1537-5110

Bennett, John and Cattle, Stephen R. (2010) Viability of lime and gypsum use in mitigating sodicity in an irrigated vertosol. In: WCSS 2010: Soil Solutions for a Changing World, 1-6 Aug 2010, Brisbane, Australia.

Nguyen-Ky, T. and Wen, Peng and Li, Yan and Gray, Robert (2010) De-noising a raw EEG signal and measuring depth of anaesthesia for general anaesthesia patients. In: 2010 IEEE/ICME International Conference on Complex Medical Engineering (CME 2010), 13-15 July 2010, Gold Coast, Australia.

Anna, Shahab and Wen, Peng (2010) Depth of anesthesia control using internal model control techniques. In: 2010 IEEE/ICME International Conference on Complex Medical Engineering (CME 2010), 13-15 July 2010, Gold Coast, Australia.

Aravinthan, Vasantha and Aravinthan, Thiru (2010) Effectiveness of self-assessment quizzes as a learning tool. In: EE 2010: Inspiring the Next Generation of Engineers , 6-8 Jul 2010, Birmingham, UK.

Awad, Ziad K. and Gonzalez, Felipe and Aravinthan, Thiru (2010) Advanced robust design optimization of FRP sandwich floor panels. IOP Conference Series: Materials Science and Engineering, 10 (1). 012182,1-012182,9. ISSN 1757-899X

Nguyen-Ky, T. and Leis, J. and Xiang, W. (2010) An improved new error estimation algorithm for optimal filter lengths for stereophonic acoustic echo cancellation. Computers and Electrical Engineering, 36 (4). pp. 664-675. ISSN 0045-7906

Shahid, Salman and Wen, Peng (2010) Analytic and numeric evaluation of EEG forward problem using spherical volume conductor models. In: 2010 IEEE/ICME International Conference on Complex Medical Engineering (CME 2010), 13-15 July 2010, Gold Coast, Australia.

Aravinthan, Vasantha (2010) Designing an ideal assessment scheme for dual mode delivery. In: EE 2010: Inspiring the Next Generation of Engineers, 6-8 Jul 2010, Birmingham, UK.

Potgieter, A. B. and Apan, A. and Hammer, G. and Dunn, P. (2010) Early-season crop area estimates for winter crops in NE Australia using MODIS satellite imagery. ISPRS Journal of Photogrammetry and Remote Sensing, 65 (4). pp. 380-387. ISSN 0924-2716

Leis, John and Zhao, Weichang and Pinnaduwage, Lal A. and Gehl, Anthony C. and Allman, Steve L. and Shepp, Allan and Mahmud, Ken K. (2010) Estimating gas concentration using a microcantilever-based electronic nose. Digital Signal Processing: A Review Journal, 20 (4). pp. 1229-1237. ISSN 1051-2004

Wang, Yafeng and Yang, Hao and Yang, Dacheng and Xiang, Wei (2010) Iterative decision feedback equalizer with cyclic detection for DFT-S OFDM system. Computers and Electrical Engineering, 36 (4). pp. 789-801. ISSN 0045-7906

Pittaway, Pam and van den Ancker, Tania (2010) Microbial and environmental implications for use of monolayers to reduce evaporative loss from water storages. Technical Report. University of Southern Queensland, Toowoomba, Australia.

Guoth, Adrienn and Benyo, Daniel and Csiszar, Jolan and Galle, Agnes and Horvath, Ferenc and Cseuz, Laszlo and Erdei, Laszlo and Tari, Irma (2010) Relationship between osmotic stress-induced abscisic acid accumulation, biomass production and plant growth in drought-tolerant and -sensitive wheat cultivars. Acta Physiologiae Plantarum, 32 (4). pp. 719-727. ISSN 0137-5881

Ahfock, A. and Gambetta, D. (2010) Sensorless commutation of printed circuit brushless direct current motors. IET Electric Power Applications, 4 (6). pp. 397-406. ISSN 1751-8660

Dowling, David (2010) The career aspirations of associate degree students: implications for engineering educators and the profession. In: EE 2010: Inspiring the Next Generation of Engineers , 6-8 Jul 2010, Birmingham, United Kingdom.

Nicholls, Angela G. (2010) Utilising spatial technology for hospital bed management. [Thesis (_PhD/Research)] (Unpublished)

Billingsley, John (2010) Controlled damping of a 48-metre wide spray rig. In: M2VIP 2010: 16th Annual Conference on Mechatronics and Machine Vision in Practice, 22-23 Jun 2010, Darussalam, Brunei.

Watt, A. C. and Aziz, S. M. and Banhazi, T. M. (2010) Air pollution and livestock production. In: CIGR 2010: Sustainable Biosystems Through Engineering, 13-17 Jun 2010, Quebec City, Canada.

Symes, Troy and Brink, Gavin (2010) A scalable distribution system for the optimal application of evaporation-suppressant film to farm dams. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-10 June 2010, Sydney, Australia.

McCarthy, Alison and Hancock, Nigel and Raine, Steven R. (2010) Simulation of adaptive site-specific irrigation control performance with spatially variable rainfall. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-10 Jun 2010, Sydney, Australia.

Koech, Richard and Raine, Steven R. (2010) The effect of irrigation non-uniformity on carrot production. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-10 Jun 2010, Sydney, Australia.

Pittaway, Pam and van den Ancker, Tania (2010) The impact of water quality on monolayer performance in reducing evaporative loss from water storages. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-10 Jun 2010, Sydney, Australia.

Yousif, B. F. and Alsofyani, I. M. and Yusaf, Talal (2010) Adhesive wear and frictional characteristics of UHMWPE and HDPE sliding against different counterfaces under dry contact condition. Tribology, 4 (2). pp. 78-85. ISSN 1751-5831

Chong, Albert K. and Brownstein, Gretchen (2010) A technique for improving webcam precision in biological plant measurement. Photogrammetric Record, 25 (130). pp. 180-196. ISSN 0031-868X

Brodie, Ian M. and Dunn, Peter K. (2010) Commonality of rainfall variables influencing suspended solids concentrations in storm runoff from three different urban impervious surfaces. Journal of Hydrology, 387 (3-4). pp. 202-211. ISSN 0022-1694

Rao, Sanjeev and Banerjee, Sourish and Jayaraman, Krishnan and Bhattacharyya, Debes (2010) Compressive behavior of fibre reinforced honeycomb cores. In: 2008 IUTAM Symposium on Multi-Functional Material Structures and Systems, 10-12 Dec 2008, Bangalore, India.

Brink, Gavin and Wandel, Andrew P. and Pittaway, Pam and Hancock, Nigel and Pather, Selvan (2010) Determining operational requirements to optimise monolayer performance on a farm dam via a 'Universal Design Framework'. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-10 June 2010, Sydney, Australia.

Kittipoomwong, Prakorn and See, Howard and Mai-Duy, Nam (2010) Dynamic simulation of non-spherical particulate suspensions. Rheologica Acta, 49 (6). pp. 597-606. ISSN 0035-4511

Khabbaz, Borzoo Ghareei and Chen, Guangnan and Baillie, Craig (2010) Energy and greenhouse gas emissions of Australian cotton: from field to fabric. In: CIGR 2010: Sustainable Biosystems Through Engineering, 13-17 Jun 2010, Quebec City, Canada.

Ismail, S. A. and Chen, G. and Baillie, C. and Symes, T. (2010) Energy usage for cotton ginning in Australia. In: CIGR 2010: Sustainable Biosystems Through Engineering, 13-17 Jun 2010, Quebec City, Canada.

Ku, Siu Lung Harry and Wen, Peng and Xiang, Wei (2010) Engineering education in China and Australia: addressing the demand-supply gap. Hong Kong Institution of Engineers Transactions, 17 (2). pp. 20-26. ISSN 1023-697X

Koech, R. K. and Smith, R. J. and Gillies, Malcolm H. (2010) Furrow irrigation in the Australian cotton industry: alternative water delivery systems and their potential for automation. Technical Report. University of Southern Queensland, National Centre for Engineering in Agriculture, Toowoomba, Australia.

Gibbings, Peter and Lidstone, John and Bruce, Christine (2010) How do student attributes influence the way students experience problem-based learning in virtual space? Australasian Journal of Engineering Education, 16 (1). pp. 69-80. ISSN 1324-5821

Koech, R. K. and Smith, R. J. and Gillies, Malcolm H. (2010) Hydraulic characteristics of large diameter gated flexible fluming. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-10 June 2010, Sydney, Australia.

Epaarachchi, Jayantha A. and Reushle, Matthew T. (2010) Performance of aluminium/vinylester particulate composite. In: PRICM7: 7th Pacific Rim International Conference on Advanced Materials and Processing, 2-6 Aug 2010, Cairns, Australia.

Symes, Troy and Hancock, Nigel and Schmidt, Erik (2010) Reliable, modest-cost seepage and evaporation measurement for farm dams using 'EvapCalc'. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-10 June 2010, Sydney, Australia. (Unpublished)

McCarthy, Alison and Hancock, Nigel and Raine, Steven R. (2010) Simulation of site-specific irrigation control strategies with sparse input data. In: CIGR 2010: Sustainable Biosystems Through Engineering, 13-17 Jun 2010, Quebec City, Canada.

Pittaway, Pam (2010) Water quality performance criteria for monolayer product specifications: selecting the right product for the job. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-10 Jun 2010, Sydney, Australia.

Kamel, Fouad and Kist, Alexander A. and Marwan, Marwan (2010) Demand-side response towards optimizing energy and infrastructure usages in the electricity supply market: smart grid tools. In: Fusion Solutions: Challenges and Innovations, 26-27 May 2010, Townsville, Australia.

Ku, H. and Goh, S. (2010) Final year engineering projects in Australia and Europe. European Journal of Engineering Education, 35 (2). pp. 161-173. ISSN 0304-3797

Guo, Qing Bing and Lau, Kin-Tak and Rong, Min Zhi and Zhang, Ming Qiu (2010) Optimization of tribological and mechanical properties of epoxy through hybrid filling. Wear, 269 (1-2). pp. 13-20. ISSN 0043-1648

Jensen, T. and Baillie, C. and Bramley, R. and Di Bella, L. and Whiteing, C. and Davis, R. (2010) Assessment of sugarcane yield monitoring technology for precision agriculture. In: 32nd Annual Conference of the Australian Society of Sugar Cane Technologists, 11-14 May 2010, Bundaberg, Australia.

Choi, Daniel and Abeysekera, Vasantha and Ramachandra, Thanuja (2010) Security of final account payments: the case of New Zealand. In: CIB World Congress 2010: Building a Better World, 10-13 May 2010, Salford Quays, United Kingdom.

Faulconbridge, Robert Ian and Dowling, David (2010) Systems approach to engineering education design. In: 2010 Systems Engineering/Test and Evaluation Conference (SETE 2010), 3-6 May 2010, Adelaide, Australia.

Li, Qiang and Yu, Baoyi and Zhang, Huawen and Li, Runxia and Wang, Feng and Xie, Shuisheng and Huang, Guojie and Wang, Hao (2010) Cellular automaton modeling of semisolid microstructure formation. China Foundry, 7 (2). pp. 143-148. ISSN 1672-6421

Yusaf, Talal F. and Buttsworth, D. R. and Saleh, Khalid H. and Yousif, B. F. (2010) CNG-diesel engine performance and exhaust emission analysis with the aid of artificial neural network. Applied Energy, 87 (5). pp. 1661-1669. ISSN 0306-2619

Nirmal, Umar and Yousif, B. F. and Rilling, Dirk and Brevern, P. V. (2010) Effect of betelnut fibres treatment and contact conditions on adhesive wear and frictional performance of polyester composites. Wear, 268 (11-12). pp. 1354-1370. ISSN 0043-1648

Li, Chang and Wang, Yafeng and Xiang, Wei and Yang, Dacheng (2010) Performance of user cooperation and clustering scheme in cellular networks. In: 2010 IEEE International Conference on Communications: Communications: Accelerating Growth and Development (ICC 2010), 23-27 May 2010, Capetown, South Africa.

Mai-Duy, Nam and Tran-Cong, Thanh (2010) Point-wise integrated-RBF-based discretisation of differential equations. In: 2nd International Symposium on Computational Mechanics (ISCM II) in conjunction with EPMESC 2009, 30 Nov-3 Dec 2009, Hong Kong, Macau.

Misra, R. K. and Patel, Jishiv H. and Baxi, Vijay (2010) Reuse potential of laundry greywater for irrigation based on growth, water and nutrient use of tomato. Journal of Hydrology, 386 (1-4). pp. 95-102. ISSN 0022-1694

Ghabraie, Kazem and Xie, Yi Min and Huang, Xiaodong and Ren, Gang (2010) Shape and reinforcement optimization of underground tunnels. Journal of Computational Science and Technology, 4 (1). pp. 51-63.

Mei-Ling Lau, Sindy and Lau, Kin-Tak and Yin, Yan-Sheng and Li, Lan and Wong, May and Chan, Kevin and Chen, William (2010) A shape memory alloy energy absorber for backpack design. Materials and Manufacturing Processes, 25 (4). pp. 281-286. ISSN 1042-6914

Le, Phong B. H. and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2010) A cartesian-grid collocation technique with integrated radial basis functions for mixed boundary value problems. International Journal for Numerical Methods in Engineering, 82 (4). pp. 435-463. ISSN 0029-5981

Simmons, Shane (2010) Part-parcel adverse possession as a means to resolving problem survey areas. In: XXIV FIG International Congress 2010 (International Federation of Surveyors), 11-16 April 2010, Sydney, Australia.

Karki, Sudarshan and McDougall, Kevin and Thompson, Rod (2010) An overview of 3d cadastre from a physical land parcel and a legal property object perspective. In: XXIV FIG International Congress 2010 (International Federation of Surveyors), 11-16 April 2010, Sydney, Australia.

Maron, Martine and Dunn, Peter K. and McAlpine, Clive A. and Apan, Armando (2010) Can offsets really compensate for habitat removal? The case of the endangered red-tailed black-cockatoo. Journal of Applied Ecology, 47 (2). pp. 348-355. ISSN 0021-8901

Ku, H. and Trada, M. and Nixon, R. and Wong, P. (2010) Flexural properties of phenolic resin reinforced with glass powder: preliminary results. Journal of Applied Polymer Science, 116 (1). pp. 347-354. ISSN 0021-8995

McDougall, Kevin (2010) From silos to networks - will users drive spatial data infrastructures in the future? In: FIG 2010: Facing the Challenges - Building the Capacity, 11-16 Apr 2010, Sydney, Australia.

Chen, Guangnan and Maraseni, Tek and Yang, Zhou (2010) Life cycle energy and carbon footprint assessments: agricultural and food products. In: Capehart, Barney L., (ed.) Encyclopedia of energy engineering and technology. Taylor & Francis , London, United Kingdom, pp. 1-5. ISBN 978-0-8493-3653-9

Guan, Lisa and Chen, Guangnan (2010) Solar energy: utilization in building operations. In: Capehart, Barney L., (ed.) Encyclopedia of energy engineering and technology. Taylor & Francis Books, London, United Kingdom, pp. 1-7. ISBN 978-0-8493-3653-9

Paudyal, Dev Raj and McDougall, Kevin (2010) Spatial data infrastructure for pro-poor land management. In: XXIV FIG International Congress 2010 (International Federation of Surveyors), 11-16 April 2010, Sydney, Australia.

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

Ramesh Kumar, Nandini and Xiang, Wei and Wang, Yafeng (2010) An FPGA-based fast two-symbol processing architecture for JPEG 2000 arithmetic coding. In: ICASSP 2010: 35th International Conference on Acoustics, Speech, and Signal Processing, 14-19 Mar 2010, Dallas, TX. USA.

Chen, A. and Lin, C. and Lu, W. and Ma, Y. and Bai, Y. and Chen, H. and Li, J. (2010) Chemical dynamics of acidity and heavy metals in a mine water-polluted soil during decontamination using clean water. Journal of Hazardous Materials, 175 (1-3). pp. 638-645. ISSN 0304-3894

Hesse, Deike and Dunn, Mark and Heldmaier, Gerhard and Klingenspor, Martin and Rozman, Jan (2010) Behavioural mechanisms affecting energy regulation in mice prone or resistant to diet-induced obesity. Physiology and Behavior, 99 (3). pp. 370-380. ISSN 0031-9384

Mai-Duy, Nam and Tran-Cong, Thanh (2010) A control volume technique based on integrated RBFNs for the convection-diffusion equation. Numerical Methods for Partial Differential Equations, 26 (2). 426 -447. ISSN 0749-159X

Epaarachchi, J. and Ku, H. and Gohel, K. (2010) A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites. Journal of Composite Materials, 44 (6). pp. 779-788. ISSN 0021-9983

Lau, Kin-tak and Ho, Mei-po and Au-Yeung, Chi-ting and Cheung, Hoi-yan (2010) Biocomposites: their multifunctionality. International Journal of Smart and Nano Materials, 1 (1). pp. 13-27. ISSN 1947-5411

Hoque, M. A. and Aravinthan, V. and Pradhan, N. M. (2010) Calibration of biokinetic model for acetate biodegradation using combined respirometric and titrimetric measurements. Bioresource Technology, 101 (5). 1426-1434 . ISSN 0960-8524

Dahmani, L. and Khennane, A. and Kaci, S. (2010) Crack identification in reinforced concrete beams using ANSYS software. Strength of Materials, 42 (2). pp. 232-240. ISSN 0039-2316

Nawi, Nazmi Mat and Chen, Guangnan and Zare, Dariush (2010) Economics of using aerated storage to minimise the impact of weather damage during wheat harvesting. Biosystems Engineering, 105 (3). pp. 323-331. ISSN 1537-5110

Manalo, A. C. and Aravinthan, T. and Karunasena, W. and Islam, M. M. (2010) Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions. Composite Structures, 92 (4). 984-995 . ISSN 0263-8223

Chan, Auc Fai (2010) Improving wireless TCP/IP performance using the median filter algorithm. [Thesis (_PhD/Research)] (Unpublished)

Erdei, Laszlo and Vigneswaran, Saravanamuthu and Kandasamy, Jaya K. (2010) Modelling of submerged membrane flocculation hybrid systems using statistical and artificial neural networks methods. Journal of Water Supply: Research and Technology, 59 (2-3). pp. 198-208. ISSN 1606-9935; 0003-7214

Kamel, Fouad and Kist, Alexander A. (2010) End-user's tools towards an efficient electricity consumption: the dynamic smart grid. In: PCO 2010: 3rd Global Conference on Power Control and Optimization , 2-4 Feb 2010, Gold Coast, Australia.

Manalo, A. and Aravinthan, T. and Karunasena, W. and Ticoalu, A. (2010) A review of alternative materials for replacing existing timber sleepers. Composite Structures, 92 (3). pp. 603-611. ISSN 0263-8223

Le, Phong (2010) RBF-based meshless modeling of strain localization and fracture. [Thesis (_PhD/Research)] (Unpublished)

Tran, Canh-Dung and Phillips, David G. and Fraser, W. Barrie (2010) Stationary solution of the ring-spinning balloon in zero air drag using a RBFN based mesh-free method. Journal of the Textile Institute, 101 (2). pp. 101-110. ISSN 0040-5000

Ku, H. and Kota, V. and Trada, M. (2010) Optimum percentage of fly ash reinforcement in vinyl ester composites. Journal of Materials in Civil Engineering, 22 (1). pp. 104-107. ISSN 0899-1561

Kolbert, Zsuzsanna and Ortega, Leandro and Erdei, Laszlo (2010) Involvement of nitrate reductase (NR) in osmotic stress-induced NO generation of arabidopsis thaliana l. roots. Journal of Plant Physiology, 167 (1). pp. 77-80. ISSN 0176-1617

Nasir, T. and Yousif, B. F. and McWilliam, S. and Salih, N. D. and Hui, L. T. (2010) An artificial neural network for prediction of the friction coefficient of multi-layer polymeric composites in three different orientations. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (2). pp. 419-429. ISSN 0954-4062

Campbell, Glenn and Phinn, Stuart R. (2010) An assessment of the accuracy and precision of water quality parameters retrieved with the matrix inversion method. Limnology and Oceanography: Methods, 8 . pp. 16-29. ISSN 1541-5856

Thomas, Benjamin Brett (2010) Development of a tournament management system. [USQ Project] (Unpublished)

Wong, K. J. and Yousif, B. F. and Low, K. O. and Ng, Y. and Tan, S. L. (2010) Effects of fillers on the fracture behaviour of particulate polyester composites. Journal of Strain Analysis for Engineering Design, 45 (1). pp. 67-78. ISSN 0309-3247

Ji, Xiaoyong and Li, Hui and Hui, David and Hsiao, Kuang-Ting and Ou, Jinping and Lau, Alan K. T. (2010) I-V characteristics and electro-mechanical response of different carbon black/epoxy composites. Composites Part B: Engineering, 41 (1). pp. 25-32. ISSN 1359-8368

Cooper, Mark Dennis (2010) Improve waste recycling potential through the conversion of normal household waste into biogas. [USQ Project] (Unpublished)

Amir, Al-Falahi and Yusoff, M. Z. and Yusaf, T. (2010) Numerical simulation of inviscid transient flows in shock tube and its validations. International Journal of Mathematical, Physical and Engineering Sciences, 4 (1). pp. 52-62. ISSN 1307-7465

Yusaf, Talal and Said, Mior Azman and Hussein, Ibrahim (2010) Performance and emission investigation of a four-stroke liquefied petroleum gas spark-ignition engine generator used in a Malaysian night market. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 224 (3). pp. 339-347. ISSN 0957-6509

Hansen, Leigh (2010) Quantifying the reduction in hydraulic conductivity of disturbed soil columns as a function of the salinity and sodicity of applied water. [USQ Project] (Unpublished)

Obiedat, Esam and Xiang, Wei and Leis, John W. and Cao, Lei (2010) Soft incremental redundancy for distributed turbo product codes. In: CCNC 2010: 7th IEEE Consumer Communications and Networking Conference, 9-12 Jan 2010, Las Vegas, NV. United States.

McCarthy, Alison and Hancock, Nigel and Raine, Steven R. (2010) VARIwise: a general-purpose adaptive control simulation framework for spatially and temporally varied irrigation at sub-field scale. Computers and Electronics in Agriculture, 70 (1). pp. 117-128. ISSN 0168-1699

Yousif, B. F. and El-Tayeb, N. S. M. (2010) Wet adhesive wear characteristics of untreated oil palm fibre-reinforced polyester and treated oil palm fibre-reinforced polyester composites using the pin-on-disc and block-on-ring techniques. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 224 (2). pp. 123-131. ISSN 1350-6501

Brink, Gavin and Wandel, Andrew P. and Pittaway, Pam and Hancock, Nigel and Pather, Selvan (2010) A ‘universal design framework’ for installation planning and operational management of evaporation-suppressing films on agricultural reservoirs. In: International Conference on Agricultural Engineering: Towards Environmental Technologies, 6-8 September 2010, Clermont-Ferrand, France. (Unpublished)

Ho-Minh, Dao and Mai-Duy, Nam and Tran-Cong, Thanh (2010) A Cartesian-grid integrated-RBF Galerkin technique. In: Sarler, Bozidar and Atluri, Satya N., (eds.) Recent studies in meshless and other novel computational methods. Tech Science Press, Duluth, GA. USA, pp. 87-102. ISBN 0-9824205-4-4

Ho-Minh, Dao and Mai-Duy, Nam and Tran-Cong, Thanh (2010) A cartesian-grid integrated-RBF method for viscoelastic flows. In: 9th World Congress on Computational Mechanics and 4th Asian-Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), 19-23 July 2010, Sydney, Australia.

Malpress, Ray and Buttsworth, David (2010) A comparison between two-position variable compression ratio and continuously variable compression ratio engines using numerical simulation. In: ICEF 2009: ASME Internal Combustion Engine Division Fall Technical Conference , 27-30 Sep 2009, Lucerne, Switzerland.

Zhou, Hong and Ali, Hesham and Youn, Jon and Zhang, Zhongwei (2010) A hybrid wired and wireless network infrastructure to improve the productivity and quality care of critical medical applications. In: 2010 IEEE/ICME International Conference on Complex Medical Engineering (CME 2010), 13-15 July 2010, Gold Coast, Australia.

Le-Cao, K. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2010) A new integrated-rbf-based domain-embedding scheme for solving fluid-flow problems. In: 9th World Congress on Computational Mechanics and 4th Asian-Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), 19-23 July 2010, Sydney, Australia.

Ma, Guangzhi and Lu, Yansheng and Wen, Peng and Song, Engmin (2010) A novel attribute reduction algorithm based on peer-to-peer technique and rough set theory. In: 2010 IEEE/ICME International Conference on Complex Medical Engineering (CME 2010), 13-15 July 2010, Gold Coast, Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2010) A numerical scheme based on local integrated RBFNs and Cartesian grids for solving second-order elliptic problems in two dimensions. In: Sarler, Bozidar and Atluri, Satya N., (eds.) Recent studies in meshless andoOther novel computational methods. Tech Science Press, Duluth, GA.USA, pp. 17-33. ISBN 0-9824205-4-4

Paudyal, Dev Raj and McDougall, Kevin and Apan, Armando (2010) A regional collaborative network to improve spatial information sharing in Australia. In: 12th Global Spatial Data Infrastructure Association World Conference (GSDI 12), 19-22 Oct 2010, Singapore.

Patel, Keyurkumar J. and Anand, S. Vijay and Kumar, Suman (2010) A robust QoS framework on Android for effective media delivery to DLNA enabled home gateway in smart home environment. In: 2010 IEEE International Conference on Wireless Communications, Networking and Information Security (WCNIS 2010), 25-27 Jun 2010, Beijing, China.

Mai-Duy, Nam and Tran-Cong, Thanh (2010) A simple and effective preconditioner for integrated-RBF-based Cartesian-grid schemes. In: 2010 International Conference on Computational and Experimental Engineering & Sciences 2010, 28 Mar - 1 Apr 2010, Las Vegas, USA.

Yousif, B. F. and Yusaf, Talal (2010) Abrasive wear behaviour of epoxy composite based on kenaf fibres. In: ASIATRIB 2010: Frontiers in Tribology - Knowledge and Friendship, 5-9 Dec 2010, Perth, Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2010) An upwind control-volume method based on integrated RBFs for fluid-flow problems. In: 9th World Congress on Computational Mechanics and 4th Asian-Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), 19-23 July 2010, Sydney, Australia.

McCarthy, Cheryl and Hancock, Nigel and Raine, Steven R. (2010) Applied machine vision of plants: a review with implications for field deployment in automated farming operations. Intelligent Service Robotics, 3 (4). pp. 209-217. ISSN 1861-2776

Craig, I. and Goh, S. and Mushtaq, S. (2010) Australian agriculture - adaptations to climate change. In: Climate Adaptation Futures: Preparing for the Unavoidable Impacts of Climate Change, 29 Jun-1 Jul 2010, Gold Coast, Australia.

McCarthy, Cheryl and Billingsley, John and Finch, Neal and Murray, P. and Gaughan, J. (2010) Cattle liveweight estimation using machine vision assessment of objective body measurements: first results. In: 28th Biennial Australian Society of Animal Production Conference, 11-15 July 2010, Armidale, Australia.

Karki, Sudarshan and Thompson, Rod and McDougall, Kevin (2010) Data validation in a 3D cadastre. In: Neutens, Tijs and de Maeyer, Philippe, (eds.) Developments in 3D geo-information sciences. Lecture Notes in Geoinformation and Cartography . Springer-Verlag, Heidelberg, Germany, pp. 92-122. ISBN 978-3-642-04790-9

Ning, Zhiliang and Wang, Hao and Sun, Jianfei (2010) Deformation behavior of semisolid A356 alloy prepared by low temperature pouring. Materials and Manufacturing Processes, 25 (7). pp. 648-653. ISSN 1042-6914

Aravinthan, Vasantha (2010) Design of public health engineering course using multimedia resources for dual mode delivery. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Zhang, X. and Abawi, Yahya and Dutta, Sunil and McClymont, David (2010) Developing ENSO-based irrigation water forecast system in a region with limited hydro-meteorological observations to mitigate the impacts of climate variability: a case study in Lombok, Indonesia. In: Climate Adaptation Futures: Preparing for the Unavoidable Impacts of Climate Change, 29 Jun-1 Jul 2010, Gold Coast, Australia.

Hoque, Muhammad A. (2010) Development and calibration of bio-kinetic models for organic carbon and nitrogen biodegradation in an aerobic activated sludge system. [Thesis (_PhD/Research)] (Unpublished)

Buttsworth, David R. and Smart, Michael K. (2010) Development of a Ludwieg tube with free piston compression heating for scramjet inlet starting experiments. In: 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition (AIAA 2010), 4-7 Jan 2010, Orlando, FL. USA.

Hasna, Abdallah M. (2010) Embedding sustainability in capstone engineering design projects. In: EDUCON 2010: The Future of Global Learning in Engineering Education, 14-16 Apr 2010, Madrid, Spain.

Dowling, David and Carew, Anna and Hadgraft, Roger (2010) Engineering your future: an Australasian guide. John Wiley & Sons Australia, Ltd., Milton, Qld, Australia. ISBN 9780470818169

Alajel, Khalid Mohamed and Xiang, Wei and Leis, John (2010) Error resilience performance evaluation of H.264 I-frame and JPWL for wireless image transmission. In: ICSPCS 2010: 4th International Conference on Signal Processing and Communication Systems, 13-15 Dec 2010, Gold Coast, Australia.

Billingsley, John (2010) Essentials of control techniques and theory. Taylor & Francis (CRC Press) , Boca Raton, FL. USA. ISBN 9781420091236

Bullen, Frank (2010) Evaluation - the driver of the engineering education machine. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Buttsworth, David and D'Souza, Mary and Potter, Daniel and Eichmann, Troy and Mudford, Neil and McGilvray, Matthew and McIntyre, Timothy J. and Jacobs, Peter and Morgan, Richard (2010) Expansion tunnel radiation experiments to support Hayabusa re-entry observations. In: 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition (AIAA 2010), 4-7 Jan 2010, Orlando, FL, USA.

Suriadi, Ahmad (2010) Field evaluation and modelling of water and nitrogen management strategies in tropical lowland rice-based production systems. [Thesis (_PhD/Research)] (Unpublished)

Ho-Minh, Dao and Mai-Duy, Nam and Tran-Cong, Thanh (2010) Galerkin/collocation methods based on 1D-integrated-RBFNs for viscoelastic flows. CMES: Computer Modeling in Engineering and Sciences, 70 (3). pp. 217-251. ISSN 1526-1492

Banko, Laszlo and Erdei, Laszlo and Ordog, Monika and Mihalik, Erzsebet (2010) Histological comparison of the rhizome, leafy culm and aerial rhizome of the common reed (Phragmites australis). Acta Biologica Szegediensis, 54 (1). pp. 15-18. ISSN 1588-385X

Pufelski, N. and Aravinthan, V. and Yusaf, T. (2010) How effective is microalgae treatment of nursery wastewater for nutrient removal? In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Li, Sumei and Xiang, Wei and Cheng, Fuwei and Zhao, Ruichao and Hou, Chunping (2010) HVS-based quality assessment metrics for 3-D images. In: 2nd WRI Global Congress on Intelligent Systems (GCIS 2010) , 16-17 Dec 2010, Wuhan, China.

Xiang, Wei and Russell, Julian and Wang, Yafeng (2010) ICI reduction through shaped OFDM in coded MIMO-OFDM systems. International Journal on Advances in Telecommunications, 3 (3&4). pp. 311-323. ISSN 1942-2601

Gillies, Malcolm H. and Smith, R. J. and Williamson, Bill and Shanahan, Matthew (2010) Improving performance of bay irrigation through higher flow rates. In: Australian Irrigation Conference and Exibition 2010: One Water Many Futures, 8-11 June 2010, Sydney, Australia.

Ngo-Cong, Duc and Mai-Duy, Nam and Karunasena, W. and Tran-Cong, Thanh (2010) Integrated-RBF network method for free vibration analysis of laminated composite plates. In: 9th World Congress on Computational Mechanics and 4th Asian-Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), 19-23 July 2010, Sydney, Australia.

Zhuge, Yan (2010) Investigation of the effect of various additives on the strength of environmentally friendly permeable concrete. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Singh, Narish and Rilling, Dirk and Yousif, B. F. (2010) Kenaf fibers for tribo-thermoplastic composites. In: IMECE 2009: ASME International Mechanical Engineering Congress and Exposition, 13-19 Nov 2009, Lake Buena Vista, FL. United States.

Khabbaz, Borzoo Ghareei (2010) Life cycle energy use and greenhouse gas emissions of Australian cotton: impact of farming systems. [Thesis (_PhD/Research)] (Unpublished)

Wandel, Andrew P. (2010) Linkages between courses: a holistic approach to programmes. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

McCarthy, Cheryl and Rees, Steven and Baillie, Craig (2010) Machine vision-based weed spot spraying: a review and where next for sugarcane? In: 32nd Annual Conference of the Australian Society of Sugar Cane Technologists, 11-14 May 2010, Bundaberg, Australia.

Apan, Armando and Phinn, Stuart and McAlpine, Clive and Kath, Jarrod (2010) Mapping habitat of threatened reptiles in Western Downs, Queensland: a spatial modelling approach using 'presence-only' occurrence data. In: Queensland Surveying and Spatial Conference 2010 (QSSC 2010), 1-3 Sept 2010, Brisbane, Queensland.

Ivanovich, Grujica S. (2010) Modern distribution network planning and application to development of electricity infrastructure. [Thesis (_PhD/Research)] (Unpublished)

Cardona, F. and Aravinthan, T. and Moscou, C. (2010) Modified PF resins for composite structures with improved mechanical properties. Polymers and Polymer Composites, 18 (6). pp. 297-306. ISSN 0967-3911

Mossad, Ruth and Aral, Hal (2010) Numerical modeling of flow in a horizontal sand filter. American Journal of Engineering and Applied Sciences, 3 (2). pp. 286-292. ISSN 1941-7020

Ming Chai, Adrian Ngu and Ibrahim, M. and Chuan, Cheah Bin and Yousif, B. F. (2010) On the development of solar drying system. In: ASME 2009 International Mechanical Engineering Congress and Exposition (IMECE2009), 13-19 Nov 2009, Florida, United States.

Alajel, Khalid Mohamed and Xiang, Wei and Leis, John (2010) Performance analysis of error resilience wireless image transmission using H.264/AVC I-frame. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Akbar, Ghani and Hamilton, Greg and Raine, Steven R. (2010) Permanent raised bed configurations and renovation methods affect crop performance. In: WCSS 2010: Soil Solutions for a Changing World, 1-6 Aug 2010, Brisbane, Australia.

Stuckey, Nicholas and Pittaway, Pam and Larsen, Kim (2010) Photodegradation of Australian freshwater microlayers and the implications for potable water management. In: 2nd Urban Water Security Research Alliance Science Forum and Stakeholder Engagement, 28-29 Sep 2010, Brisbane, Australia.

Adnan, M. and Iqbal, M. and Wang, Y. and Yang, D. and Xiang, Wei (2010) Physical layer multicasting over 2-hop network using dual amplify and forward relay. In: 2nd International Conference on Future Computer and Communication (ICFCC 2010), 21-24 May 2010, Wuhan, China.

Banhazi, Thomas and Babinszky, Laszlo (2010) Precision livestock farming and nutrition. In: KRMIVA 2010: Innovation in Non-Ruminant Nutrition, 7-9 Jun 2010, Opatija, Croatia.

Ranjbar, Iraj and Rashidi, Majid and Khabbaz, Borzoo Ghareei (2010) Prediction of repair and maintenance costs of two-wheel tractors in Iran. In: CIGR 2010: Sustainable Biosystems through Engineering, 13-17 Jun 2010, Quebec City, Canada.

Rashidi, Majid and Khabbaz, Borzoo Ghareei (2010) Prediction of total soluble solids and firmness of carrot based on carrot water content. In: CIGR 2010: Sustainable Biosystems Through Engineering, 13-17 Jun 2010, Quebec City, Canada.

Brodie, Lyn (2010) Problem based learning for teams working in virtual space. [Thesis (_PhD/Research)] (Unpublished)

Pittaway, Pam and van den Ancker, Tania (2010) Properties of natural microlayers on Australian freshwater storages and their potential to interact with artificial monolayers. Marine and Freshwater Research, 61 (10). pp. 1083-1091. ISSN 1323-1650

Hussain, Amjed (2010) Quantifying the role of irrigation uniformity on lettuce production and profitability in the Lockyer Valley, Queensland. [Thesis (_PhD/Research)] (Unpublished)

Keogh, D. and Apan, A. and Mushtaq, S. (2010) Resilience, vulnerability and adaptive capacity of an inland rural town prone to flooding: a climate change adaptation case study of Charleville, Queensland, Australia. In: Climate Adaptation Futures: Preparing for the Unavoidable Impacts of Climate Change, 29 Jun-1 Jul 2010, Gold Coast, Australia.

Tari, I. and Kiss, G. and Deer, Aranka K. and Csiszar, J. and Erdei, L. and Galle, A. and Gemes, Katalin and Horvath, Ferenc and Poor, Peter and Szepesi, Agota and Simon, L. M. (2010) Salicylic acid increased aldose reductase activity and sorbitol accumulation in tomato plants under salt stress. Biologia Plantarum: Journal for Experimental Botany, 54 (4). pp. 677-683. ISSN 0006-3134

Ho-Minh, D. and Le-Cao, K. and Mai-Duy, N. and Tran-Cong, T. (2010) Simulation of fluid flows at high Reynolds/Rayleigh numbers using integrated radial basis functions. In: 17th Australasian Fluid Mechanics Conference (AFMC 2010), 5-9 Dec 2010, Auckland, New Zealand.

Buttsworth, David R. and Agrira, Abdalla and Malpress, Ray and Yusaf, Talal (2010) Simulation of instantaneous heat transfer in spark ignition internal combustion engines: unsteady thermal boundary layer modelling. In: ICEF 2009: ASME Internal Combustion Engine Division Fall Technical Conference, 27-30 Sep 2009, Lucerne, Switzerland.

Tran, Canh-Dung and Smith, Shaun M. and Higgerson, G. and Huynh, Chi and Kviz, Ladge and Maudev, George and Lucas, Stuart and Bui, Anh (2010) Spinning CNT based composite yarns using a dry spinning process. In: 2010 International Conference on Nanoscience and Nanotechnology (ICONN 2010), 22- 26 Feb 2010, Sydney, Australia.

Csiszar, Jolan and Guoth, Adrienn and Kolbert, Zsuzsanna and Galle, Agnes and Tari, Irma and Ciulca, Sorin and Madosa, Emilian and Erdei, Laszlo (2010) Starch to protein ratio and alpha-amylase activities in grains of different wheat cultivars. Acta Biologica Szegediensis, 54 (1). pp. 19-23. ISSN 1588-385X

Wandel, Andrew P. (2010) Student usage of videos containing worked solutions. In: AaeE 2010: Past, Present, Future - the 'Keys' to Engineering Education Research and Practice, 5-8 Dec 2010, Sydney, Australia.

Thorpe, David and Goh, Steven (2010) Study of SME innovation in two Queensland industries. In: Al-Hakim, Latif and Jin, Chen, (eds.) Innovation in business and enterprise: technologies and frameworks. Business Science Reference (IGI Global), Hershey PA, USA, pp. 240-259. ISBN 978-1-61520-643-8

Ku, H. and Trada, M. and Cecil, T. and Wong, P. (2010) Tensile tests of phenol formaldehyde glass-powder-reinforced composites: pilot study. Journal of Applied Polymer Science, 116 (1). pp. 10-17. ISSN 0021-8995

Apan, Armando and Keogh, Diane and King, David and Thomas, Melanie and Mushtaq, Shahbaz and Baddiley, Peter (2010) The 2008 floods in Queensland: a case study of vulnerability, resilience and adaptive capacity. Technical Report. National Climate Change Adaptation Research Facility (NCCARF).

Gallego-Elvira, B. and Martínez-Alvarez, V. and Pittaway, Pam and Symes, Troy and Hancock, Nigel (2010) The combined use of shade-cloth covers and monolayers to prevent evaporation in irrigation reservoirs. In: International Conference on Agricultural Engineering (AgEng 2010), 06-08 Sept 2010, Clermont-Ferrand, France. (Unpublished)

Wong, K. J. and Yousif, B. F. and Low, K. O. (2010) The effects of alkali treatment on the interfacial adhesion of bamboo fibres. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 224 (3). pp. 139-148. ISSN 1464-4207

Billingsley, John (2010) The facts about carbon and climate: a presentation of data for the reader's evaluation. In: 2010 Southern Region Engineering Conference (SREC2010), 10-12 Nov 2010, Toowoomba, Australia.

Campbell, Glenn and Liddle, James (2010) The implementation of a competency based assessment system for applicants for a restrictive licence for cadastral surveying. In: XXIV FIG International Congress 2010 (International Federation of Surveyors), 11-16 Apr 2010, Sydney, Australia.

Nirmal, Umar and Jamil, Nadia and Yousif, B. F. and Rilling, Dirk and Brevern, P. V. (2010) The potential of using treated betelnut fibres as reinforcement for tribo-bio polymeric composites subjected to dry/wet contact conditions. In: ICNP 2010: Macro to Nano Scales, 24-26 Sep 2010, Kottayam, India.

Tavakkoli, Ehsan and Rengasamy, Pichu and McDonald, Glenn (2010) The response of barley to salinity stress differs between hydroponic and soil systems. Functional Plant Biology, 37 (7). pp. 621-633. ISSN 1445-4408

Wang, Hao (2010) The role of casting temperature in preparation of bulk metallic glasses. In: THERMEC 2009: 6th International Conference on Processing and Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications, 25-29 Aug 2009, Berlin, Germany.

Le-Cao, K. and Mai-Duy, N. and Tran, C.-D. and Tran-Cong, T. (2010) Towards an analysis of shear suspension flows using radial basis functions. CMES: Computer Modeling in Engineering and Sciences, 67 (3). pp. 265-294. ISSN 1526-1492

Al-Haddad, A. A. and Salih, Nbhan D. and Wen, Chin Chee and Yusaf, T. F. and Yousif, B. F. (2010) New technique measuring film thickness for tribological machines. In: ASME 2009: International Mechanical Engineering Congress and Exposition, 13-19 Nov 2009, Lake Buena Vista, FL. USA.

Yousif, B. F. and Lau, Saijod T. W. and McWilliam, S. (2010) Polyester composite based on betelnut fibre for tribological applications. Tribology International, 43 (1-2). pp. 503-511. ISSN 0301-679X

Banhazi, T. M. and Rutley, D. L. and Pitchford, W.S. (2010) Validation and fine-tuning of a predictive model for air quality in livestock buildings. Biosystems Engineering, 105 (3). pp. 395-401. ISSN 1537-5110

Cheung, Hoi-Yan and Lau, Kin-Tak and Pow, Yu-Fung and Zhao, Yong-Qing and Hui, David (2010) Biodegradation of a silkworm silk/PLA composite. Composites Part B: Engineering, 41 (3). pp. 223-228. ISSN 1359-8368

Bose, Saswata and Kuila, Tapas and Uddin, Md. Elias and Kim, Nam Hoon and Lau, Alan K. T. and Lee, Joong Hee (2010) In-situ synthesis and characterization of electrically conductive polypyrrole/graphene nanocomposites. Polymer, 51 (25). pp. 5921-5928. ISSN 0032-3861

Lian, C. and Zhuge, Y. (2010) Optimum mix design of enhanced permeable concrete: an experimental investigation. Construction and Building Materials, 24 (12). pp. 2664-2671. ISSN 0950-0618

Fu, Jinlin and Hou, Chunping and Xiang, Wei and Yan, Lei and Hou, Yonghong (2010) Generalised spatial modulation with multiple active transmit antennas. In: GC 2010: IEEE Globecom Workshops , 5-10 Dec 2010, Miami, FL, USA.

Le, Phong B. H. and Rabczuk, Timon and Mai-Duy, Nam and Tran-Cong, Thanh (2010) A moving IRBFN-based Galerkin meshless method. CMES: Computer Modeling in Engineering and Sciences, 66 (1). pp. 25-52. ISSN 1526-1492

Le, Phong B. H. and Rabczuk, Timon and Mai-Duy, Nam and Tran-Cong, Thanh (2010) A moving IRBFN-based integration-free meshless method. CMES: Computer Modeling in Engineering and Sciences, 61 (1). pp. 63-109. ISSN 1526-1492

Phillips, D. G. and Tran, Canh-Dung and Fraser, W. B. and van der Heijden, G. H. M. (2010) Torsional properties of staple fibre plied yarns. Journal of the Textile Institute, 101 (7). pp. 595-612. ISSN 0040-5000

Cheng, Sha and Lau, Kin-Tak and Chen, Shougang and Chang, Xueting and Liu, Tao and Yin, Yansheng (2010) Microscopical observation of the marine bacterium vibrio natriegeus growth on metallic corrosion. Materials and Manufacturing Processes, 25 (5). pp. 293-297. ISSN 1042-6914

Lau, Mei-ling and Lau, Kin-tak and Yao Yeo, Yan-dong and Yeung, Chi-ting Au and Lee, Joong-hee (2010) Measurement of bovine bone properties through surface indentation technique. Materials and Manufacturing Processes, 25 (5). pp. 324-328. ISSN 1042-6914

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

Park, Ok-kyung and Kim, Nam Hoon and Lau, Kin-Tak and Lee, Joong Hee (2010) Effect of surface treatment with potassium persulfate on dispersion stability of multi-walled carbon nanotubes. Materials Letters, 64 (6). pp. 718-721. ISSN 0167-577X

2009

Xiang, Wei and Clemence, Andrew and Leis, John and Wang, Yafeng (2009) Error resilience analysis of wireless image transmission using JPEG, JPEG 2000 and JPWL. In: ICICS 2009: 7th International Conference on Information, Communications and Signal Processing, 8-10 Dec 2009, Macau, China.

Somasundaraswaran, Kathirgamalingam (2009) An overview of engineering education in Sri Lanka. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Goh, Steven and Worden, John and Zhou, Hong and Cubero, Samuel (2009) A case study on the revitalisation of a 2nd level engineering and spatial science PBL course. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, South Australia.

Faulconbridge, Robert Ian and Dowling, David (2009) A conceptual framework for the development of engineering courses. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Said, Mior Azman and Buttsworth, David R. and Yusaf, Talal (2009) A review of radiation heat transfer measurement for diesel engines using the two-colour method. In: 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability (ICEE 2009) , 7-8 Dec 2009, Malacca, Malaysia.

Majid, Zulkepli and Setan, Halim and Chong, Albert K.-F. (2009) Accuracy assessments of point cloud 3D registration method for high accuracy craniofacial mapping. Geoinformation Science Journal, 9 (2). pp. 36-44. ISSN 1511-9491

Billingsley, John and Oetomo, Denny and Reid, John (2009) Agricultural robotics. IEEE Robotics and Automation Magazine, 16 (4). 16, cont-19. ISSN 1070-9932

Dowling, David (2009) An exploration of cross-disciplinary engineering education research collaborations. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Cochrane, Sandra and Goh, Steven and Ku, Harry (2009) An investigation into the application of research strategies in the final-year undergraduate engineering and surveying projects. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, South Australia.

Goodwin, Brent (2009) Analyse original marks and occupation used to reinstate boundaries for identification surveys. [USQ Project] (Unpublished)

Brodie, Lyn and Loch, Birgit (2009) Annotations with a Tablet PC or typed feedback: does it make a difference? In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Devine, Jo (2009) Assessable online discussion groups as a student learning tool. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Brodie, I. M. (2009) Australian examples of residential integrated water cycle planning: accepted current practice and a suggested alternative. Desalination and Water Treatment, 12 (1-3). pp. 324-330. ISSN 1944-3994

Islam, M. M. and Aravinthan, T. and Van Erp, G. (2009) Behaviour of innovative fibre composite sandwich panels under point loading. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009) , 9-11 Dec 2009, Seoul, Korea.

Hoque, Muhammad A. and Aravinthan, Vasantha and Pradhan, Nishant M. (2009) Can we decode the messages of activated sludge through the respirograms? Water, Air, and Soil Pollution: Focus, 9 (5/6). pp. 449-459. ISSN 1567-7230

Widodo, A. and Buttsworth, D. (2009) Deduction of temperature fluctuations in transient compression wind tunnels using incompressible turbulent flow data. In: 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability (ICEE 2009), 7-8 Dec 2009, Malacca, Malaysia.

AlMahrouqi, Abdullah Khalfan (2009) Demand-supply interacting system towards a dynamic electrical energy management - the smart grid. [Thesis (_PhD/Research)] (Unpublished)

Nguyen-Van, Hieu (2009) Development and application of assumed strain smoothing finite element technique for composite plate/shell structures. [Thesis (_PhD/Research)] (Unpublished)

Goh, Steven and Bullen, Frank (2009) Diversification of engineering management studies in enriching the learning experience for the 21st century global engineer. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, South Australia.

Ku, Harry and Wen, Paul and Xiang, Wei and Goh, Steven (2009) Engineering education - undergraduate and masters: China and down under. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, South Australia.

Brodie, L. M. (2009) eProblem-based learning: problem-based learning using virtual teams. European Journal of Engineering Education, 34 (6). pp. 497-509. ISSN 0304-3797

Chong, Albert K.-F. (2009) Field calibration of zoom cameras for two camera- photogrammetric applications. In: RSPSoc 2009 Annual Conference, 8-11 September 2009, Leicester, England.

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2009) Flexural behaviour of laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

Xiang, Wei and Zhu, Ce and Siew, Chee Kheong and Xu, Yuanyuan and Liu, Minglei (2009) Forward error correction-based 2-D layered multiple description coding for error-resilient H.264 SVC video transmission. IEEE Transactions on Circuits and Systems for Video Technology, 19 (12). pp. 1730-1738. ISSN 1051-8215

Agrira, Abdalla and Buttsworth, David R. and Yusaf, Talal (2009) Instantaneous heat flux simulation of S.I. engines: comparison of unsteady thermal boundary layer modelling with experimental data. In: 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability (ICEE 2009), 7-8 Dec 2009, Malacca, Malaysia.

Dowling, David (2009) Managing student diversity in the Master of Engineering Practice program. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Buttsworth, David R. (2009) Multizone internal combustion engine modelling: initial assessment of a simulation tool developed in Matlab. In: 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability (ICEE 2009), 7-8 Dec 2009, Malacca, Malaysia.

Gambetta, Daniele Morco (2009) New design methodologies for printed circuit axial field brushless dc motors. [Thesis (_PhD/Research)] (Unpublished)

Buttsworth, D. R. (2009) Nitrous oxide decomposition for supersonic combustion experiments in the USQ Ludwieg Tube facility. In: Australian Combustion Symposium 2009 (ACS09), 2-4 Dec 2009, Brisbane, Australia.

Najafi, G. and Yusaf, T. F. and Ghobadian, B. and Najmeddin, V. R. and Yousif, B. F. (2009) Performance and exhaust emission of a SI engine fuelled with potato waste ethanol and its blends with gasoline. RERIC International Energy Journal, 10 (4). pp. 215-226. ISSN 1513-718X

Buttsworth, David R. and Jacobs, Peter A. (2009) Premature ignition in scramjets with intake injection: a preliminary laminar mixing layer simulation. In: Australian Combustion Symposium 2009 (ACS09), 2-4 Dec 2009, Brisbane, Australia.

Kist, Alexander A. (2009) Staged request routing for reduced carbon footprints of large scale server systems. In: ATNAC 2009: Australasian Telecommunication Networks and Applications Conference, 9-11 Nov 2009, Canberra, Australia.

Mohd Ariff, Mohd Farid and Majid, Zulkepli and Setan, Halim and Chong, Albert K.-F. (2009) Stereo-image capture tool for forensic mapping of surveillance video footage. Geoinformation Science Journal, 9 (2). pp. 21-35. ISSN 1511-9491

Buttsworth, David R. and Malpress, Ray (2009) Student views on hardware-based problem solving activities for external and on-campus teams. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Zhuge, Yan and Mills, Julie E. (2009) Teaching finite element modelling at the undergraduate level: a PBL approach. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Kist, Alexander A. (2009) Trialling an assignment structure that develops generic competencies and enriches subject understanding. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Padhi, Jyotiprakash and Misra, R. K. and Payero, Jose (2009) Use of infrared thermography to detect water deficit response in an irrigated cotton crop. In: International Conference on Food Security and Environmental Sustainability (FSES 2009), 17-19 Dec 2009, Kharagpur, India.

Karunasena, W. and Aravinthan, T. and Manalo, A. C. (2009) Vibration of debonded laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

Cardona, F. and Rogers, D. and Gurney, R. and Trada, M. and Ku, H. (2009) Flexural tests of phenol formaldehyde and SLG composites: pilot study. Journal of Reinforced Plastics and Composites, 28 (22). pp. 2761-2769. ISSN 0731-6844

Ku, Harry Siu-Lung and Cardona, Francisco and Trada, Mohar and Vigier, Gurlaume (2009) Flexural properties of sawdust reinforced phenolic composites: pilot study. Journal of Applied Polymer Science, 114 (3). pp. 1927-1934. ISSN 0021-8995

Cole, Andrew James Shorten (2009) A comprehensive study of footing on c-φ soil slopes - numerical and physical modelling. [USQ Project] (Unpublished)

Goh, S. and Bullen, F. and Gibbings, P. (2009) A proposed learning journey for the 21st century global engineering manager: an Australian perspective. In: APES 2009: Managing Projects, Programs and Ventures in Times of Uncertainty and Disruptive Change, 19-20 Nov 2009, Sydney, Australia.

Brice, Joshua (2009) An investigation into the Victorian permanent survey mark infrastructure. [USQ Project] (Unpublished)

McCarthy, Cheryl and Hancock, Nigel and Raine, Steven R. (2009) Automated internode length measurement of cotton plants under field conditions. Transactions of the American Society of Agricultural Engineers, 52 (6). pp. 2093-2103. ISSN 0001-2351

Hasna, Abdallah M. (2009) Chemical engineering industry transition towards sustainability. In: SSEE 2009: Solutions for a Sustainable Planet, 22-24 Nov 2009, Melbourne, Australia.

Lyle, Nathan Ross (2009) Comprehensive design charts for the footing on slope problem. [USQ Project] (Unpublished)

Kirsch, Joshua (2009) Design of a small wind turbine for electric power generation(1-5kW). [USQ Project] (Unpublished)

Douglas, Nadine Sarah (2009) Development of an asset maintenance program for Darwin City Council. [USQ Project] (Unpublished)

Mushtaq, Shahbaz and Khan, Shahbaz and Hafeez, Mohsin and Hanjra, Munir A. (2009) Does reliability of water resources matter in the adoption of water-saving irrigation practices? a case study in the Zhanghe irrigation system, China. Water Policy, 11 (6). pp. 661-679. ISSN 1366-7017

Lam-Dao, Nguyen and Le-Toan, Thuy and Apan, Armando and Bouvet, Alexandre and Young, Frank R. and Le-Van, Trung (2009) Effects of changing rice cultural practices on C-band synthetic aperture radar backscatter using Envisat advanced synthetic aperture radar data in the Mekong River Delta. Journal of Applied Remote Sensing, 3 (1). pp. 1-17. ISSN 1931-3195

Goh, Steven and Park, Sang-Soon (2009) Enabling pathways by enabling cultural and value change in engineering academics. In: Enabling Pathways: 3rd National Conference of Enabling Educators, 25-27 Nov 2009, Toowoomba, Australia.

Mead, Nicola and Aravinthan, Vasantha (2009) Investigation of household water consumption using smart metering system. Desalination and Water Treatment, 11 (1-3). pp. 115-123. ISSN 1944-3994

Mead, Nicola and Aravinthan, Vasantha (2009) Investigation of household water consumption using smart metering system. In: 2nd Conference on Challenges in Environmental Science and Engineering (CESE-2009): Waste Treatment: Challenges and Solutions, 14-17 Jul 2009, Townsville, Queensland .

Perera, Kithsiri and Tateishi, Ryutaro (2009) Quantifying biomass fluctuations in Mitchell grassland, Queensland, using multi-temporal MODIS data. In: 47th Autumn Conference of the Remote Sensing Society of Japan, 26-27 Nov, 2009, Nagoya, Japan.

Blaby, Bradley Peter (2009) Re-establishment of the state border between New South Wales and Victoria. [USQ Project] (Unpublished)

Jeffery, Simon (2009) Review of failure mode, effect and criticality analysis (FMECA) on major equipment of the crushing and screening plant at the BORAL Quarry at Ormeau, Queensland. [USQ Project] (Unpublished)

Coates, Gary (2009) Steering and suspension design for a SAE-A formula race car. [USQ Project] (Unpublished)

Mead, Stuart (2009) Numerical modelling of horizontal flow in sand filters. [USQ Project] (Unpublished)

Parry, Aaron (2009) Remote aerial data acquisition and capture project (RADAC). [USQ Project] (Unpublished)

Deas, Scott (2009) The accuracy of published co-ordinates on the 'Survey Mark Enquiry Service’(SMES)in Victoria using GPS observations. [USQ Project] (Unpublished)

Langdon, Aaron G. (2009) Traffic induced moisture entry into road pavements. [USQ Project] (Unpublished)

Ku, Harry S. and Trada, Mohan and Zong, Xuejin and Wong, Peter (2009) Flexural properties of phenolic resin reinforced with glass powder. In: ICAST 2009: 20th International Conference on Adaptive Structures and Technologies , 20-22 Oct 2009, Shatin, Hong Kong.

Zhou, Hong and Wu, Huayi (2009) The integration of wireless sensor networks, remote sensing and geographic information systems for autonomous environmental and animal monitoring. In: IADIS International Conference on Applied Computing 2009 (IADIS 2009), 19-21 Nov 2009, Rome, Italy.

Zhuge, Yan and Lian, Chunqi (2009) Development of environmentally friendly and structural enhanced permeable concrete pavement material. In: 2009 Southern Engineering Conference: Infrastructure Investment For a New Economy, 17-18 Oct 2009, Springfield, Qld, Australia.

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2009) Finite element analysis of fibre composite sandwich panel. In: Southern Engineering Conference, 17-18 Oct 2009, Springfield, Queensland, Australia.

Hoque, M. A. and Aravinthan, V. and Pradhan, N. M. (2009) Assessment on activated sludge models for acetate biodegradation under aerobic conditions. Water Science and Technology, 60 (4). pp. 983-994. ISSN 0273-1223

Trada, Mohan and Ku, Harry and Vedhar, Jayant (2009) Flexural strength of phenol formaldehyde composites post-cured in microwaves: preliminary results. In: MFMS 2009: 2nd International Conference on Multi-functional Materials and Structures, 9-12 Oct 2009, Qingdao, China.

Kamel, Fouad (2009) Adequate electrical transmission and distribution networks capable to cater for extensive renewable energy utilization in Australia. In: 47th Annual Conference of the Australian and New Zealand Solar Energy Society (Solar09), 29 Sept - 2 Oct 2009, Townsville, Australia.

Liu, Xiaoye and Zhang, Zhenyu and Peterson, Jim (2009) Evaluation of the performance of DEM interpolation algorithms for LiDAR data. In: 2009 Surveying and Spatial Sciences Institute Biennial International Conference: Spatial Diversity (SSC 2009), 28 Sep-2 Oct 2009, Adelaide, Australia.

Dakers, Nicole (2009) A cost benefit analysis of rural residential water supply – constant flow vs. full pressure. [USQ Project] (Unpublished)

Mai-Duy, Nam and Ho-Minh, Dao and Tran-Cong, Thanh (2009) A Galerkin approach incorporating integrated radial basis function networks for the solution of 2D biharmonic equations. International Journal of Computer Mathematics, 86 (10-11). pp. 1746-1759. ISSN 0020-7160

Reinbott, Nigel (2009) A review and update of the supply chain documentation within Amcor Flexibles. [USQ Project] (Unpublished)

Mulliss, Michael Stephen (2009) A review of the application of adverse possession within the Torrens system of land regulation in Australia. [USQ Project] (Unpublished)

Jordan, Benjamin W. D. (2009) A touch-screen controlled 'Linear Predictive Synthesizer' for accessibility applications. [USQ Project] (Unpublished)

Milne, G. (2009) Airframe development and flight testing for entry into the 2009 Outback Challenge. [USQ Project] (Unpublished)

Crone, Jeffrey John (2009) Alternate pavement types on reactive soils in the Ipswich Council area. [USQ Project] (Unpublished)

Wady, Vaughan (2009) An investigation of land and property information (NSW) proposed E-Plan process of digital survey plan lodgement in LandXML format. [USQ Project] (Unpublished)

Simmons, Shane (2009) An overview of adverse possession in Australia within the framework of the Torrens system of land registration and comment on a related court case. In: 2009 Surveying and Spatial Sciences Institute Biennial International Conference: Spatial Diversity (SSC 2009), 28 Sep-2 Oct 2009, Adelaide, South Australia.

Perera, Kithsiri and Apan, Armando (2009) Analysing biomass fluctuations in Mitchell grassland, Australia, in wet and dry rainy months using MODIS data. In: 2009 Surveying and Spatial Sciences Institute Biennial International Conference: Spatial Diversity (SSC 2009), 28 Sep-2 Oct 2009, Adelaide, Australia.

Surtees, Mark Stephen James (2009) Bathymetric survey of flooded open cast mine workings. [USQ Project] (Unpublished)

Plain, Matthew (2009) Behaviour of innovative fibre composite sandwich panels for structural applications. [USQ Project] (Unpublished)

Pickford, Christopher Ian (2009) Behaviour of laminated fibre composite sandwich girders. [USQ Project] (Unpublished)

Jones, Jeffrey Francis (2009) Comparison of robotic total stations for scanning of volumes or structures. [USQ Project] (Unpublished)

Mayen, David Ayuen (2009) Composites from natural renewable resources in civil engineering: Epoxidized vegetable oil with epoxy resin, fly ash and sawdust fillers(mechanical, physical and structural properties). [USQ Project] (Unpublished)

Gould, Nicholas (2009) Conceptual design of a sustainable energy-waste solution for the residential sector. [USQ Project] (Unpublished)

Drew, Aaron Matthew (2009) DEA control interface, power system analysis, synchronisation and load management controls - design, construction and commissioning. [USQ Project] (Unpublished)

Campbell, Andrew Charles (2009) Deriving a high resolution DEM from ALOS PRISM data. [USQ Project] (Unpublished)

Vaipulu, Seini 'Ela Uatekini (2009) Design a prototype solar dryer for drying sea cucumber. [USQ Project] (Unpublished)

Fitzhenry, Ryan (2009) Design and develop virtual reality games utilising the 'anti‐gravity' arm support for stroke rehabilitation therapy. [USQ Project] (Unpublished)

Howarth, Rowan (2009) Design and documentation of Bairnsdale regional landfill - Cell 3 Johnston’s Road, Bairnsdale. [USQ Project] (Unpublished)

Kuan, Siew Yeng (2009) Design, construction and operation of the floating roof tank. [USQ Project] (Unpublished)

Assiriyage, Buddhi Nuwan Lanka (2009) Develop a computer-based system to assess and exercise the arm movement of stroke patients. [USQ Project] (Unpublished)

O'Shannassy, Geoffrey Mark (2009) Development of a driver training simulator for use by stroke patients. [USQ Project] (Unpublished)

Backman, Shane A. (2009) Development of a high voltage DLA test apparatus. [USQ Project] (Unpublished)

Camplin, Tony (2009) Development of methods to monitor continuously operating reference station antenna stability. [USQ Project] (Unpublished)

Althaus, Kimberley (2009) Effect of irrigation management on nitrate movement under a lettuce crop. [USQ Project] (Unpublished)

Sharma, R. and Parsons, D. and Sippell, B. (2009) Effects of replacing incandescent lamps with energy saving compact fluroescent lamps. In: 47th Annual Conference of the Australian and New Zealand Solar Energy Society (Solar09), 29 Sept - 2 Oct 2009, Townsville, Australia.

Grimm, Justin John (2009) Electromagnetic linear actuator - design, manufacture and control. [USQ Project] (Unpublished)

Jones, Adam (2009) Enabling voice calls via a wireless broadband router. [USQ Project] (Unpublished)

Manthey, Nathan William (2009) Environmentally friendly natural fibre composites with Qld. based vegetable oils. [USQ Project] (Unpublished)

Cooney, Tyson (2009) Epoxidised resins from natural renewable resources. [USQ Project] (Unpublished)

Wise, Timothy Glen (2009) Error resilient H.264 coded video transmission over wireless channels. [USQ Project] (Unpublished)

Huq, Rezwanul (2009) Flexural strength of three types of glass powder reinforced vinyl ester composites. [USQ Project] (Unpublished)

Korowa, Geoffrey (2009) Fracture toughness of glass powder reinforced vinyl ester resin. [USQ Project] (Unpublished)

Burton, Bruce (2009) Griffin Road drainage diversion – feasibility study. [USQ Project] (Unpublished)

Brandis, Cameron (2009) High voltage earthing system testing - an investigation into the effects of test lead coupling on test results. [USQ Project] (Unpublished)

Sankowsky, Brendan (2009) Hydraulic conductivity response of soils to synthetic laundry greywater. [USQ Project] (Unpublished)

Taylor, Benjamin Allan (2009) Improving accuracy of rainwater tank hydrologic yield estimation across Queensland. [USQ Project] (Unpublished)

Zhu, Z. W. and Zhang, H. F. and Wang, Hao and Ding, B. Z. and Hu, Z. Q. and Huang, Han (2009) Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting. Journal of Materials Research, 24 (10). pp. 3108-3115. ISSN 0884-2914

Wu, Chao di (2009) Investigate the best percentage by weight of glass powder, as fillers in phenolic resins by using tensile tests. [USQ Project] (Unpublished)

Koschel, Michael (2009) Investigation into reliability of AUSPOS coordinate data (specifically height). [USQ Project] (Unpublished)

Day, Anthony (2009) Investigation into the causes and possible remedies for the registered surveyor shortage in regional Queensland. [USQ Project] (Unpublished)

Hosking, Alan (2009) Investigation into the effectiveness of reflectorless technologies on structural surveillance monitoring. [USQ Project] (Unpublished)

Shears, Steven Edward (2009) Investigation of life cycle management of electromagnetic flow meters. [USQ Project] (Unpublished)

Chan, Zee Hong (2009) Investigation of next generation IEEE 802.11n wireless local area networks (WLAN). [USQ Project] (Unpublished)

Bichel, Mitchell Neil (2009) Investigation of the quality management system at Lockyer Valley Regional Council. [USQ Project] (Unpublished)

McMahon, Craig Andrew (2009) Investigation of the quality of water treated by magnetic fields. [USQ Project] (Unpublished)

Saunders, Michael Joseph (2009) Investigation of the relationship between experimental bridge piers and erosion within a flow. [USQ Project] (Unpublished)

Ling, Damian James (2009) Investigation of the Riegl terrestial scanners - uses and limitations. [USQ Project] (Unpublished)

Taylor, Alan Owen (2009) Investigation on the fatigue behaviour of pultruded fibre composites. [USQ Project] (Unpublished)

Goh, Steven C. (2009) Investing in the future of engineering education infrastructure for sustainability. In: Southern Engineering Conference, 17-18 October 2009, Springfield, Qld, Australia.

Porter, Hannah Elizabeth (2009) Involvement of older drivers at crashes at unsignalised and signalised intersections. [USQ Project] (Unpublished)

Smith, Travis (2009) Ipswich City Council development assessment: streamlining the process. [USQ Project] (Unpublished)

Supandy, Mohammed (2009) Life cycle assessment of ultra pure water plant in semiconductor industry. [USQ Project] (Unpublished)

Munro, Frazer (2009) Localised geoid modelling using GPS and precise levelling data. [USQ Project] (Unpublished)

Taylor, Oliver John (2009) Market segmentation for improved efficiency of Ipswich water supply system. [USQ Project] (Unpublished)

Eddine, Mustapha Jamal (2009) Measurement of fracture toughness, mechanical and electrical loss tangents of calcium carbonate reinforced vinyl ester composites. [USQ Project] (Unpublished)

Dann, Jeffrey Michael (2009) Modernisation of an existing irrigation area. [USQ Project] (Unpublished)

Cheung, Hoi-Yan and Ho, Mei-Po and Lau, Kin-Tak and Cardona, Francisco and Hui, David (2009) Natural fibre-reinforced composites for bioengineering and environmental engineering. Composites Part B: Engineering, 40 (7). pp. 655-663. ISSN 1359-8368

Yu, Yu Wah (2009) Pile driving analysis via dynamic loading test. [USQ Project] (Unpublished)

Lascalles, Alex (2009) Potential impact of rising sea level on land ownership and government planning. [USQ Project] (Unpublished)

Cunningham, Mitch (2009) Profiling coal on a conveyor belt for the automation of a train loadout facility. [USQ Project] (Unpublished)

Willisch, S. (2009) Programming Sun(TM)SPOTs (Small Programmable Object Technology) in Java(TM). [USQ Project] (Unpublished)

Kinast, Matthew (2009) Real-time data transmission and control of a Neocot over the internet. [USQ Project] (Unpublished)

Schmidt, Erik (2009) Reducing evaporation losses. International Water Power and Dam Construction, 61 (10). pp. 38-39. ISSN 0306-400X

Christensen, Zane Michael (2009) Reduction of local scour around bridge piers: Combined system of aerofoil and slot. [USQ Project] (Unpublished)

Coaker, Leigh Herbert (2009) Reflector-less total station measurements and their accuracy, precision and reliability. [USQ Project] (Unpublished)

Scoines, Barry William (2009) Replacement of steam turbine drive with electric drive. [USQ Project] (Unpublished)

Hopson, Matthew (2009) SCADA and RFI interference on RTK surveys. [USQ Project] (Unpublished)

Armstrong, Andrew Jonathan (2009) Sealing works performance study. [USQ Project] (Unpublished)

Hugo, Sarah (2009) Simulation and analysis of MIMO-OFDM for a 4G cellular network. [USQ Project] (Unpublished)

Summerville, Cameron (2009) Structural performance of low grade timber slabs. [USQ Project] (Unpublished)

Cheung, Hoi-Yan and Ho, Mei-po and Lau, Kin-tak and Mosallam, Ayman (2009) Study on the mechanical properties of different silkworm silk fibers. Journal of Composite Materials, 43 (22). pp. 2521-2531. ISSN 0021-9983

Zerbst, Samuel David William (2009) Temperature effects on a fibre reinforced polymer material. [USQ Project] (Unpublished)

Zhong, Xiaoliang (2009) Tensile strength of sawdust reinforced vinyl ester composites. [USQ Project] (Unpublished)

Baker, Philip James (2009) The 50 kph speed limit in residential Toowoomba. [USQ Project] (Unpublished)

Garratt, Blythe Jonathan (2009) The development of a wrist rehabilitation device for movement therapy. [USQ Project] (Unpublished)

Rennie, Tristan James (2009) The effect of vandalism on fibre composite structures. [USQ Project] (Unpublished)

Gould, Nicholas and Goh, Steven C. (2009) The influencing factors in designing conceptual energy-waste solutions for sustainable housing. In: 2009 Southern Engineering Conference: Infrastructure Investment For a New Economy, 17-18 Oct 2009, Springfield, Qld, Australia.

Wall, Adrian (2009) The use of a terrestrial laser scanner in an open cut mining environment. [USQ Project] (Unpublished)

Brodie, Lyn and Porter, Mark (2009) Transitions to first year engineering - diversity as an asset. Studies in Learning, Evaluation, Innovation and Development, 6 (2). pp. 1-15. ISSN 1832-2050

Coulter, Allison Kerrie-Anne (2009) Use of Fiber Bragg grating sensors in structural health monitoring. [USQ Project] (Unpublished)

Arnison, Christopher John (2009) Using ground penetrating radar (GPR) with multiple pass scans to improve 3D positional reliability of subterranean features. [USQ Project] (Unpublished)

Phythian, Mark and Taylor, Jim and Reushle, Shirley and Harris, Glenn and Kist, Alexander and Ayers, Ron (2009) Work in progress: a novel method of creating an academic content repository. In: FIE 2009: Imagining and Engineering Future CSET Education, 18-21 Oct 2009, San Antonio, TX, USA.

Kamel, Fouad (2009) Solar energy to mitigate electrical diurnal peak demand in Queensland. In: 47th Annual Conference of the Australian and New Zealand Solar Energy Society (Solar09), 29 Sep - 2 Oct 2009, Townsville, Australia.

Kamel, Fouad (2009) User-controlled energy consumption in a transparent electricity system. In: 47th Annual Conference of the Australian and New Zealand Solar Energy Society (Solar09), 29 Sept - 2 Oct 2009, Townsville, Australia.

Billingsley, John (2009) Automation and the farmer. In: SEAg 2009: Agricultural Technology in a Changing Climate, 13-16 Sept 2009, Brisbane, Australia.

Dunwoody, Ernest and Liu, Xiaoye and McDougall, Kevin and McRae, Peter (2009) A spatial analysis of Greater Bilby (Macrotis Lagotis) habitat in South-West Queensland. In: 2009 Surveying and Spatial Sciences Institute Biennial International Conference: Spatial Diversity (SSC 2009), 28 Sep-2 Oct 2009, Adelaide, Australia.

Campbell, Glenn and Phinn, Stuart R. (2009) Accuracy and precisions of water quality parameters retrieved from particle swarm optimisation in a sub-tropical lake. In: SPIE 2009: Remote Sensing of the Ocean, Sea Ice, and Large Water Regions, 31 Aug-3 Sep 2009, Berlin, Germany.

Fraser, M. J. and Chen, Guangnan and Esdaile, R. J. and Yang, Zhou (2009) Design and modeling of the structural integrity of a universal toolbar for two wheeled power tiller. In: SEAg 2009: Agricultural Technology in a Changing Climate , 13-16 Sep 2009, Brisbane, Australia.

Gambetta, D. and Ahfock, A. (2009) Designing printed circuit stators for brushless permanent magnet motors. IET Electric Power Applications, 3 (5). pp. 482-490. ISSN 1751-8660

Rashidi, M. and Bahri, M. H. and Khabbaz, B. G. (2009) Effects of coating methods and storage periods on some quality characteristics of carrot during ambient storage. In: SEAg 2009: Agricultural Technologies In a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Mohammad Zamani, D. and Rashidi, M. and Ghareei Khabbaz, B. (2009) Generation digital management map for herbicide application in VRA spraying by using GPS. In: SEAg 2009: Agricultural Technology in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Chong, Albert K. and Milburn, Peter and Newsham-West, Richard and ter Voert, Marieke (2009) High-accuracy photogrammetric technique for human spine measurement. Photogrammetric Record, 24 (127). pp. 264-279. ISSN 0031-868X

Tran, Canh-Dung and Humphries, William and Smith, Shaun M. and Huynh, Chi and Lucas, Stuart (2009) Improving the tensile strength of carbon nanotube spun yarns using a modified spinning process. Carbon, 47 (11). pp. 2662-2670. ISSN 0008-6223

Genet, Martin and Yan, Wenyi and Tran-Cong, Thanh (2009) Investigation of a hydraulic impact: a technology in rock breaking. Archive of Applied Mechanics, 79 (9). pp. 825-841. ISSN 0939-1533

Lian, Chunqi and Zhuge, Yan (2009) Investigation of the effect of aggregate on the performance of permeable concrete. In: Ghafoori, Nader, (ed.) Challenges, opportunities, and solutions in structural engineering and construction: ISEC-05 proceedings. Taylor & Francis (CRC Press), United Kingdom, pp. 505-510. ISBN 978-0-415-56809-8

Adnan, Muhammad and She, Haoqiu and Wang, Yafeng and Yang, Dacheng and Xiang, Wei (2009) Multicast based dual amplify and forward relay scheme for 2 hop networks. In: LATINCOM 2009: 1st IEEE Latin-American Conference on Communications, 10-11 Sep 2009, Medellin, Colombia.

Rashidi, M. and Khabbaz, B. G. (2009) Response of crop yield and yield components of tomato to different tillage methods in the arid lands of Varamin, Iran. In: SEAg 2009: Agricultural Technology in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Lam-Dao, Nguyen and Apan, Armando and Le-Toan, Thuy and Bouvet, Alexandre and Young, Frank and Le-Van, Trung (2009) Rice crop mapping using radar imagery: comparison of classification accuracy of different Envisat ASAR modes and classifiers. In: 2009 Surveying and Spatial Sciences Institute Biennial International Conference (SSC2009), 28 Sep-2 Oct 2009, Adelaide, Australia.

Dang, Y. P. and Apan, Armando and Dalal, R. C. and Darr, Shawn Geoffrey and Schmidt, M. and Pringle, M. (2009) Simulating spatial variability of cereal yields from historical yield maps and satellite imagery. In: 2009 Surveying and Spatial Sciences Institute Biennial International Conference: Spatial Diversity (SSC 2009), 28 Sept - 2 Oct 2009, Adelaide, Australia.

He, Jin and Wang, Qingjie and Li, Hongwen and Tullberg, J. N. and McHugh, A. D. and Bai, Yuhua and Zhang, Xuemin and McLaughlin, Neil and Gao, Huanwen (2009) Soil physical properties and infiltration after long-term no-tillage and ploughing on the Chinese Loess Plateau. New Zealand Journal of Crop and Horticultural Science, 37 (3). pp. 157-166. ISSN 0014-0671

Smith, Anthony Patrick (2009) Surveying and the law. [USQ Project] (Unpublished)

Hussain, A. and Raine, S. R. and Smith, R. J. (2009) The economics of sprinkler irrigation uniformity for lettuce production with in-season rainfall. In: SEAg 2009: Agricultural Technologies in a Changing Climate , 13-16 Sep 2009, Brisbane, Queensland.

Helwig, Andreas and Ahfock, Tony L. (2009) Ultra-capacitor assisted battery storage for remote area power supplies: a case study. In: AUPEC 2009: Sustainable Energy Technologies and Systems, 27-30 Sept 2009, Adelaide, South Australia.

Sharma, R. and Ball, J. A. R. (2009) Unipolar stitched inverter low-frequency harmonics caused by stitching delay. IET Power Electronics, 2 (5). pp. 508-516. ISSN 1755-4535

Suriadi, Ahmad and Gaydon, Donald and Abawi, Yahya and Misra, R. K. (2009) Capability of APSIM-Oryza to stimulate lowland rice-based farming systems under nitrogen treatments in a tropical climate. In: 2nd Biennial International Symposium on Farming Systems Design: Methodologies for Integrated Analysis of Farm Production Systems, 23-26 Aug 2009, Monterey, CA. USA.

Suriadi, Ahmad and Misra, R. K. and Gaydon, Donald and Abawi, Yahya (2009) Performance of rice on a coarse sandy loam soil in response to water-saving irrigation practices in lowland eastern Indonesia. In: 2nd Biennial International Symposium on Farming Systems Design: Methodologies for Integrated Analysis of Farm Production Systems, 23-26 August 2009, Monterey, California, USA.

Kamel, Fouad (2009) Potential of solar energy contribution in Queensland. In: EESA 2009: Electricity 2009 - Smart Grids, Smart Energy and Smart People, 5-7 Aug 2009, Gold Coast, Australia.

Zare, Dariush and Chen, Guangnan (2009) Evaluation of a simulation model in predicting the drying parameters for deep-bed paddy drying. Computers and Electronics in Agriculture, 68 (1). pp. 78-87. ISSN 0168-1699

Ku, H. and Xiang, W. and Pattarachaiyakoop, N. (2009) Mathematical modeling of the fracture toughness of phenol formaldehyde composites reinforced with E-spheres. In: 2nd International Conference on Multi-functional Materials and Structures, 9-12 Oct 2009, Qingdao, China.

Najafi, G. and Ghobadian, B. and Tavakoli, T. and Yusaf, T. (2009) Potential of bioethanol production from agricultural wastes in Iran. Renewable and Sustainable Energy Reviews, 13 (6-7). pp. 1418-1427. ISSN 1364-0321

Mustapha, U. M. and Ku, H. and Goh, S. (2009) Research design for investigation of Nigeria manufacturing management. In: RSKT 2009: 4th International Conference on Rough Sets and Knowledge Technology, 14-16 Jul 2009, Gold Coast, Australia.

Ku, H. (2009) Teaching of critical path networks using software packages. In: RSKT 2009: 4th International Conference on Rough Sets and Knowledge Technology , 14-16 Jul 2009, Gold Coast, Australia.

Kamel, Fouad (2009) Sharing communication network resources for a user-controlled electrical energy consumption. In: QUESTnet 2009: Leveraging our Investment, 7-10 Jul 2009 , Gold Coast, Australia. (Unpublished)

Chong, Albert and Newsham-West, Richard and Milburn, Peter (2009) 3D photogrammetric analysis of the load-bearing foot. In: ISB 2009: XXII Congress of the International Society of Biomechanics , 5-9 Jul 2009, Cape Town, South Africa.

Chong, Albert K.-F. and Newsham-West, Richard and ter Voert, Marieke and Milburn, Peter (2009) Close range photogrammetric analysis of the human spine. In: XXII Congress of the International Society of Biomechanics, 5-9 July 2009, Cape Town, South Africa .

Ezlit, Younes Daw (2009) Modelling the change in conductivity of soil associated with the application of saline-sodic water. [Thesis (_PhD/Research)] (Unpublished)

Xiang, Wei and Desai, Bhavin and Wen, Peng and Wang, Yafeng and Peng, Tianshu (2009) A prototype biometric security authentication system based upon fingerprint recognition. In: RSKT 2009: 4th International Conference on Rough Set and Knowledge Technology , 14-16 Jul 2009, Gold Coast, Australia.

Manalo, Allan and Mutsuyoshi, Hiroshi and Aravinthan, Thiru and Matsui, Takahiro (2009) Behaviour of hybrid FRP composite I-girder with concrete deck. In: FRPRCS-9: Current Challenges and Future Trends, 13-15 July 2009, Sydney, Australia.

Brodie, Lyn and Gibbings, Peter (2009) Comparison of PBL assessment rubrics. In: REES 2009: Research in Engineering Education Symposium, 20-23 Jul 2009, Cairns, Australia.

Golshani, Aliakbar and Tran-Cong, Thanh (2009) Energy analysis of hydraulic fracturing. KSCE Journal of Civil Engineering, 13 (4). pp. 219-224. ISSN 1226-7988

Chen, Guangnan and Baillie, Craig Peter and Kupke, Paul (2009) Evaluating on-farm energy performance in agriculture. Australian Journal of Multi-Disciplinary Engineering, 7 (1). pp. 55-62. ISSN 1448-8388

Brodie, I. M. and Misra, R. K. (2009) Evaluation of greenwaste mulch to control runoff quality from landfill sites during frequent storms. Water, Air and Soil Pollution, 201 (1-4). pp. 75-85. ISSN 0049-6979

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Islam, Mainul (2009) Flexural behaviour of composite sandwiches for structural applications. In: FRPRCS-9: Current Challenges and Future Trends, 13-15 Jul 2009, Sydney, Australia.

Teng, Lanzhi and Wen, Peng (2009) Stability analysis of model-based networked control system with unreliable links. In: RSKT 2009: 4th International Conference on Rough Sets and Knowledge Technology , 14-16 Jul 2009, Gold Coast, Australia.

Dowling, David (2009) Using graduate attributes as a curriculum design tool. In: 37th SEFI Annual Conference: Attracting Young People to Engineering (SEFI 2009), 1-4 July 2009, Rotterdam, Netherlands.

Brodie, Lyn (2009) Virtual teamwork and PBL - barriers to participation and learning. In: REES 2009: Research in Engineering Education Symposium, 20-23 Jul 2009, Cairns, Australia.

Dunwoody, John Ernest (2009) Detection of Greater Bilby (Macrotis lagotis) habitat in South-West Queensland using remote sensing imagery and geographic information systems. Coursework Masters thesis, University of Southern Queensland.

Yousif, B. F. and Devadas, Alvin and Yusaf, Talal (2009) Adhesive wear and frictional behaviour of multilayered polyester composite based on betelnut fiber mats under wet contact conditions. Surface Review and Letters, 16 (3). pp. 407-414. ISSN 0218-625X

Le-Cao, K. and Mai-Duy, N. and Tran-Cong, T. (2009) An effective integrated-RBFN Cartesian-grid discretization for the stream function-vorticity temperature formulation in nonrectangular domains. Numerical Heat Transfer, Part B: Fundamentals, 55 (6). pp. 480-502. ISSN 1040-7790

Dowling, David (2009) Assessment of prior workplace learning: a case study. In: 16th World Conference on Cooperative Education and Work Integrated Learning: An International Dialogue in Vancouver, 23-26 Jun 2009, Vancouver, Canada.

Paudyal, Dev Raj and McDougall, Kevin and Apan, Armando (2009) Building SDI bridges for catchment management. In: van Loenen, B. and Besemer, J. W. J. and Zevenbergen, J. A., (eds.) SDI convergence: research, emerging trends, and critical assessment. Netherlands Geodetic Commission, Delft, The Netherlands, pp. 265-279. ISBN 978-90-6132-310-5

Mai-Duy, Nam and Tran-Cong, Thanh (2009) Integrated radial-basis-function networks for computing Newtonian and non-Newtonian fluid flows. Computers and Structures, 87 (11-12). pp. 642-650. ISSN 0045-7949

McDougall, Kevin and Rajabifard, Abbas and Williamson, Ian (2009) Local government and SDI - understanding their capacity to share data. In: van Loenen, B. and Besemer, J. W. J. and Zevenbergen, J. A., (eds.) Spatial data infrastructure convergence: research, emerging trends, and critical assessment. Netherlands Geodetic Commission, Delft, The Netherlands, pp. 205-218. ISBN 978-90-6132-310-5

Ariff, Mohd Farid Mohd and Majid, Zulkepli and Chong, Albert K. and Setan, Halim (2009) Photogrammetric-based security system. Geoinformation Science Journal, 9 (1). pp. 62-69. ISSN 1511-9491

Peng, Tianshu and Struthers, Craig and Wen, Peng (2009) Real-time pressure monitoring and control of a hydraulic system without sensor. In: 4th International Conference on Rough Sets and Knowledge Technology (RSKT 2009), 14-16 Jul 2009, Gold Coast, Australia.

Wen, Peng and Li, Yuefeng and Polkowski, Lech and Yao, Yiyu and Tsumoto, Shusaku and Wang, Guoyin, eds. (2009) Rough sets and knowledge technology: proceedings of the 4th International Conference on Rough Sets and Knowledge Technology. Lecture Notes in Artificial Intelligence, 5589 . Springer-Verlag, Berlin / Heidelberg, Germany. ISBN 978-3-642-02961-5

Brodie, Ian M. and Dunn, Peter K. (2009) Suspended particle characteristics in storm runoff from urban impervious surfaces in Toowoomba, Australia. Urban Water Journal, 6 (2). pp. 137-146. ISSN 1573-062X

McDougall, Kevin (2009) The potential of citizen volunteered spatial information for building SDI. In: GSDI 11 World Conference: Spatial Data Infrastructure Convergence: Building SDI Bridges to Address Global Challenges, 15-19 June 2009, Rotterdam, The Netherlands. (Unpublished)

Perera, Kithsiri and Tsuchiya, Kiyoshi (2009) Experiment for mapping land cover and it's change in southeastern Sri Lanka utilizing 250m resolution MODIS imageries. Advances in Space Research, 43 (9). pp. 1349-1355. ISSN 0273-1177

Chen, Guangnan and Baillie, Craig (2009) Development of a framework and tool to assess on-farm energy uses of cotton production. Energy Conversion and Management, 50 (5). pp. 1256-1263. ISSN 0196-8904

Amir, Al-Falahi and Yusoff, M. Z. and Shuaib, N. H. and Yusaf, T. (2009) Flow instability in shock tube due to shock wave-boundary layer-contact surface interactions, a numerical study. European Journal of Scientific Research, 30 (1). pp. 164-176. ISSN 1450-216X

Najafi, G. and Ghobadian, B. and Tavakoli, T. and Buttsworth, D. R. and Yusaf, T. F. and Faizollahnejad, M. (2009) Performance and exhaust emissions of a gasoline engine with ethanol blended gasoline fuels using artificial neural network. Applied Energy, 86 (5). pp. 630-639. ISSN 0306-2619

Ku, H. and Cardona, F. and Pattarachaiyakoop, N. and Trada, M. (2009) Fracture toughness of phenol formaldehyde composites reinforced with e-spheres. Journal of Composite Materials, 43 (7). pp. 741-754. ISSN 0021-9983

Ku, H. S. and Fok, S. C. and Siores, E. (2009) Contrasts on fracture toughness and flexural strength of varying percentages of SLG-reinforced phenolic composites. Journal of Composite Materials, 43 (8). pp. 885-895. ISSN 0021-9983

Chen, Guangnan and Baillie, Craig (2009) Agricultural applications: energy uses and audits. In: Capehart, Barney L., (ed.) Encyclopedia of Energy Engineering and Technology. Taylor & Francis , London, United Kingdom, pp. 1-5. ISBN 978-0-8493-3653-9

Ghobadian, B. and Rahimi, H. and Nikbakht, A. M. and Najafi, G. and Yusaf, T. F. (2009) Diesel engine performance and exhaust emission analysis using waste cooking biodiesel fuel with an artificial neural network. Renewable Energy, 34 (4). pp. 976-982. ISSN 0960-1481

Ghobadian, Barat and Najafi, Gholamhassan and Rahimi, Hadi and Yusaf, T. F. (2009) Future of renewable energies in Iran. Renewable and Sustainable Energy Reviews, 13 (3). pp. 689-695. ISSN 1364-0321

Sohn, Jae Ho and Pioggia, Giovanni and Craig, Ian P. and Stuetz, Richard M. and Atzeni, Michael G. (2009) Identifying major contributing sources to odour annoyance using a non-specific gas sensor array. Biosystems Engineering, 102 (3). pp. 305-312. ISSN 1537-5110

Guo, Qing Bing and Rong, Min Zhi and Jia, Guo Liang and Lau, Kin-Tak and Zhang, Ming Qiu (2009) Sliding wear performance of nano-SiO2/short carbon fiber/epoxy hybrid composites. Wear, 266 (7-8). pp. 658-665. ISSN 0043-1648

Chen, Wei and Wang, Hao and Zhang, Lei and Tang, Xiushan (2009) Development of hot drawing process for nitinol tube. International Journal of Modern Physics B, 23 (6/7). pp. 1968-1974. ISSN 0217-9792

Ghude, Sarang and Wen, Paul (2009) PID controller evaluation with missing samples in a networked control system using spline interpolation method. In: ICCAE 2009: International Conference on Computer and Automation Engineering, 8-10 Mar 2009, Bangkok, Thailand.

Ross, David and Ku, Harry S. and Penfold, Peter (2009) A lucrative export - engineering education: down under. DIAS Technology Review, 5 (2). pp. 14-23. ISSN 0972-9658

Chong, Albert K.-F. and Croft, Hayden (2009) A photogrammetric application in virtual sport training. Photogrammetric Record, 24 (125). pp. 51-65. ISSN 0031-868X

McCarthy, Cheryl (2009) Automatic non-destructive dimensional measurement of cotton plants in real-time by machine vision. [Thesis (_PhD/Research)] (Unpublished)

de Almeida, Ceres Duarte Guedes Cabral and Botrel, Tarlei Arriel and Smith, R. J. (2009) Characterisation of the micro-tube emitters used in a novel micro-sprinkler. Irrigation Science, 27 (3). pp. 209-214. ISSN 0342-7188

Tran, Canh-Dung and Phillips, David G. and Tran-Cong, Thanh (2009) Computation of dilute polymer solution flows using BCF-RBFN based method and domain decomposition technique. Korea-Australia Rheology Journal, 21 (1). pp. 1-12. ISSN 1226-119X

Yusaf, Talal F. (2009) Diesel engine optimization for electric hybrid vehicles. Journal of Energy Resources Technology, 131 (1). 12203-1-12203-4. ISSN 0195-0738

Navabian, M. and Liaghat, A. M. and Smith, R. J. and Abbasi, F. (2009) Empirical functions for dependent variables in cutback furrow irrigation. Irrigation Science, 27 (3). pp. 215-222. ISSN 0342-7188

de Almeida, B. G. and da Silva, A. P. and Raine, Steven R. and Figueiredo, G. C. (2009) Evaluation of automotive varnish as a coating for density measurements of soil clods. Journal of the Soil Science Society of America, 73 (2). pp. 449-452. ISSN 0361-5995

Misra, Rabindra K. and Sivongxay, Amphone (2009) Reuse of laundry greywater as affected by its interaction with saturated soil. Journal of Hydrology, 366 (1-4). pp. 55-61. ISSN 0022-1694

Parsons, David (2009) The environmental impact of engineering education in Australia. International Journal of Life Cycle Assessment, 14 (2). pp. 175-183. ISSN 0948-3349

Gill, N. Singh and Yousif, B. F. (2009) Wear and frictional performance of betelnut fibre-reinforced polyester composite. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (2). pp. 183-194. ISSN 1350-6501

Mai-Duy, Nam and Tran-Cong, Thanh (2009) An integrated-RBF technique based on Galerkin formulation for elliptic differential equations. Engineering Analysis with Boundary Elements, 33 (2). pp. 191-199. ISSN 0955-7997

Bouvet, Alexandre and Le Toan, Thuy and Lam-Dao, Nguyen (2009) Monitoring of the rice cropping system in the Mekong Delta using ENVISAT/ASAR dual polarization data. IEEE Transactions on Geoscience and Remote Sensing , 47 (2). pp. 517-526. ISSN 0196-2892

Liang, Qing Quan (2009) Performance-based analysis of concrete-filled steel tubular beam–columns, part I: theory and algorithms. Journal of Constructional Steel Research, 65 (2). pp. 363-372. ISSN 0143-974X

Liang, Qing Quan (2009) Performance-based analysis of concrete-filled steel tubular beam–columns, part II: verification and applications. Journal of Constructional Steel Research, 65 (2). pp. 351-362. ISSN 0143-974X

Nguyen-Ky, T. and Wen, Peng and Li, Yan (2009) Theoretical basis for identification of different anesthetic states based on routinely recorded EEG during operation. Computers in Biology and Medicine, 39 (1). pp. 40-45. ISSN 0010-4825

Gambetta, D. and Ahfock, A. (2009) A new sensorless commutation technique for brushless DC motors. IET Electric Power Applications, 3 (1). pp. 40-49. ISSN 1751-8660

Mai-Duy, Nam and See, Howard and Tran-Cong, Thanh (2009) A spectral collocation technique based on integrated Chebyshev polynomials for biharmonic problems in irregular domains. Applied Mathematical Modelling, 33 (1). pp. 284-299. ISSN 0307-904X

Leis, John W. and Snook, Chris (2009) A zero-cost, real-time, Windows signal laboratory. International Journal of Electrical Engineering Education, 46 (1). pp. 1-10. ISSN 0020-7209

Davis, Kieren Peter (2009) Application of an urban runoff model using surface specific parameters. [USQ Project] (Unpublished)

Xiang, Wei and Otto, Colin W. and Wen, Peng (2009) Automated vehicle classification system for AUSTROADS standard based upon laser sensor technology. Australian Journal of Electrical and Electronics Engineering, 5 (2). pp. 95-106. ISSN 1448-837X

Rahimi, Hadi and Ghobadian, Barat and Yusaf, Talal and Najafi, Gholamhasan and Khatamifar, Mahdi (2009) Diesterol: an environment-friendly IC engine fuel. Renewable Energy, 34 (1). pp. 335-342. ISSN 0960-1481

Najafi, Gholamhassan and Yusaf, Talal (2009) Experimental investigation of using methanol-diesel blended fuels in diesel engine. In: 4th International Conference on Thermal Engineering Theory and Applications, 12-14 Jan 2009, Abu Dhabi, UAE.

Yousif, B. F. (2009) Frictional and wear performance of polyester composites based on coir fibres. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (1). 51 -59. ISSN 1350-6501

Houghton, Richard (2009) Impact of tailings subsidence on rehabilitated landform erosional stability. [USQ Project] (Unpublished)

McIntyre, Timothy J. and Eichmann, Troy N. and Mallon, Michael and Potter, Daniel and Brandis, Aaron and Jacobs, Carolyn and Morgan, Richard and Jacobs, Peter and Buttsworth, David R. (2009) The generation and measurement of high temperature radiating flows in a high enthalpy pulsed facility. In: 3rd International Workshop on Radiation of High Temperature Gases in Atmospheric Entry, 30 Sep - 3 Oct 2008, Heraklion, Greece.

Mai-Duy, Nam and Tran-Cong, Thanh (2009) A Cartesian-grid discretisation scheme based on local integrated RBFNs for two-dimensional elliptic problems. CMES: Computer Modeling in Engineering and Sciences, 51 (3). pp. 213-238. ISSN 1526-1492

Ho-Minh, Dao and Mai-Duy, Nam and Tran-Cong, Thanh (2009) A Galerkin-RBF approach for the streamfunction-vorticity-temperature formulation of natural convection in 2D enclosured domains. CMES: Computer Modeling in Engineering and Sciences, 44 (3). pp. 219-248. ISSN 1526-1492

Brodie, Ian and Brodie, Lyn (2009) A knowledge-information-data concept model for engineering education. Australasian Journal of Engineering Education, 15 (3). pp. 137-144. ISSN 1324-5821

Baillie, Craig Peter and Chen, Guangnan (2009) A methodology for on farm energy assessment. In: 2009 RIRDC Life Cycle Assessment Workshop, 13 May 2009, Canberra, ACT.

Malpress, Ray and Buttsworth, David R. (2009) A study to identify relationships between the grade given for an undergraduate problem solving course and the students' reported satisfaction levels. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Zhou, Hong and Zhang, Zhongwei (2009) Adaptive end-to-end QoS provision for real-time multimedia applications in heterogeneous multi-hop wireless networks. In: 5th International ICST Mobile Multimedia Communications Conference (MobiMedia'09), 7-9 September 2009, London, United Kingdom.

Thorpe, D. S. (2009) Adoption of advanced materials by SME constructors. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Shinozaki, H. and Pandey, G. R. and Mutsuyoshi, H. and Aravinthan, T. (2009) AFRP retrofitting of RC structures in Japan. In: ACMSM20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Malpress, Ray and Buttsworth, David R. (2009) Air motor for improved engine brake efficiency: design and preliminary experiments. In: ICEE 2009: 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability, 7-8 Dec 2009, Malacca, Malaysia.

Amir, Al-Falahi and Yusoff, M. Z. and Yusaf, T. (2009) An experimental evaluation of shock wave strength and peak pressure in a conventional shock tube and a free-piston compressor. In: IMECE 2008: ASME International Mechanical Engineering Congress and Exposition, 31 Oct-6 Nov 2008, Boston, MA, USA.

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2009) An improved quadrilateral flat element with drilling degrees of freedom for shell structural analysis. CMES: Computer Modeling in Engineering and Sciences, 49 (2). pp. 81-110. ISSN 1526-1492

Ticoalu, A. and Aravinthan, T. and Karunasena, W. (2009) An investigation on the stiffness of timber sleepers for the design of fibre composite sleepers. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Islam, M. M. and Kim, H. S. (2009) An overview on manufacturing and properties of syntactic foams made of ceramic hollow microspheres and starch. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Wandel, Andrew P. and Lindstedt, R. Peter (2009) Application of hybrid binomial Langevin-multiple mapping conditioning method to reacting jet flow. In: Australian Combustion Symposium 2009 (ACS09), 2-4 Dec 2009, Brisbane, Australia.

McCarthy, Cheryl and Billingsley, John (2009) Applied machine vision in agriculture at the NCEA. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Ismail, Siti Amni (2009) Assessment of energy usage for cotton gins in Australia. [Thesis (_PhD/Research)] (Unpublished)

Grabham, Michael and Hornbuckle, John and Raine, Steven R. and Smith, Rod (2009) Bankless channel irrigation systems: irrigation performance assessment. In: Irrigation Australia 2009: Irrigation Australia Irrigation and Drainage Conference: Irrigation Today - Meeting the Challenge, 18-21 Oct 2009, Swan Hill, Australia.

Islam, Md Mainul (2009) Behaviour of innovative fibre composite sandwich panels. In: Workshop on Life Cycle Assessment of Sustainable FRP Materials, 14 Dec 2009, Saitama, Japan. (Unpublished)

Wollenhaupt, Anja and Withers, Kerry and Billingsley, John (2009) Behaviour of juvenile antechinus flavipes: a preliminary study. In: 26th Annual Meeting of the Australian and New Zealand Society for Comparative Physiology and Biochemistry (ANZSCPB 2009) , 27-29 Nov 2009, Geelong, Victoria.

Thorpe, David and Swan, Taryn and Hannigan, Delphine (2009) Challenges in offering engineering programs at a new campus. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Epaarachchi, J. A. (2009) Change of dynamic response of pultruded composite components used in advanced composite structures due to fatigue and fracture. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Hasna, Abdallah M. (2009) Climate change, contemporary society and engineering practice: a sustainability journey. The International Journal of Climate Change: Impacts and Responses, 1 (4). pp. 139-150. ISSN 1835-7156

Hasna, Abdallah M. (2009) Contemporary society, technology and sustainability. International Journal of Technology, Knowledge and Society, 5 (1). pp. 13-20. ISSN 1832-3669

Banhazi, T. M. and Currie, E. P. K. and Quartararo, M. and Aarnink, A. J. A. (2009) Controlling the concentrations of airborne particles in broiler buildings. In: Aland, A. and Madec, F., (eds.) Sustainable animal production: the challenges and potential developments for professional farming. Wageningen Academic Publishers, Wageningen, Netherlands, pp. 347-364. ISBN 978-90-8686-685-4

Shahab, Anna and Wen, Peng and Richard, George (2009) Convection drying process modeling and simulation study based on tomato. In: International Conference on Robotics, Informatics, Intelligence Control System Technology (RIIT 2009), 11- 14 December 2009, Bangkok, Thailand.

Buttsworth, David R. and Sercombe, David B. (2009) Cranz-Schardin visualisation of a hypersonic cone with gas injection. In: 28th International Congress on High-Speed Imaging and Photonics, 9-14 Nov 2008, Canberra, Australia.

Jensen, Troy and Apan, Armando and Zeller, Les (2009) Crop maturity mapping using a low-cost low-altitude remote sensing system. In: 2009 Surveying and Spatial Sciences Institute Biennial International Conference: Spatial Diversity (SSC 2009), 28 Sep-2 Oct 2009, Adelaide, Australia.

Zhuge, Yan and Yeap, Kai (2009) Debonding characteristics of masonry structures retrofitted with FRP. In: 17th Annual International Conference on Composites or Nano Engineering ICCE17, 26 Jul-1 Aug 2009, Honolulu, Hawaii, USA.

Smith, Rod and Baillie, Justine (2009) Defining precision irrigation: a new approach to irrigation management. In: Irrigation Australia 2009: Irrigation Australia Irrigation and Drainage Conference: Irrigation Today - Meeting the Challenge, 18-21 Oct 2009, Swan Hill, Australia.

Wang, Hao and Ning, Zhiliang (2009) Deformation behaviour of aluminium alloy A356 in semisolid state. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Omar, T. and Aravinthan, T. (2009) Design and development of a fibre composite windmill structure. Australian Journal of Structural Engineering, 10 (1). pp. 25-36. ISSN 1328-7982

Potgieter, Andries B. (2009) Determining broadacre crop area estimates through the use of multi-temporal modis satellite imagery for major Australian winter crops. [Thesis (_PhD/Research)] (Unpublished)

Brink, Gavin and Symes, Troy and Hancock, Nigel (2009) Development of a 'smart' monolayer application system for reducing evaporation from farm dams: introductory paper. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Nawi, Nazmi Mat (2009) Development of a climate-based computer model to reduce wheat harvest losses in Australia. [Thesis (_PhD/Research)] (Unpublished)

Boh, Tjasa and Billingsley, John and Bradbeer, Robin and Hodgson, Paul (2009) Development of a multi-drive submersible platform for deep seabed research. In: OCEANS 2009: Balancing Technology with Future Needs, 11-14 May 2009, Bremen, Germany.

Rees, Steven and McCarthy, Cheryl and Artizzu, Xavier and Baillie, Craig and Dunn, Mark (2009) Development of a prototype precision spot spray system using image analysis and plant identification technology. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Yang, Zhou and Chen, Guangnan and Duan, J. and Peng, T. and Wang, J. (2009) Development strategy of agricultural machinery based on energy-saving in China. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Schroll, Peter and Wandel, Andrew P. and Cant, R. Stewart and Mastorakos, E. (2009) Direct numerical simulations of autoignition in turbulent two-phase flows. Proceedings of the Combustion Institute, 32 (2). pp. 2275-2282. ISSN 1540-7489

Wandel, Andrew P. and Chakraborty, Nilanjan and Mastorakos, E. (2009) Direct numerical simulations of turbulent flame expansion in fine sprays. Proceedings of the Combustion Institute, 32 (2). pp. 2283-2290. ISSN 1540-7489

Sharifian, Ahmad and Buttsworth, David R. (2009) Direct radiation from wildfires through square woven screens. In: ASME 2008: Summer Heat Transfer Conference, 10-14 Aug 2008, Jacksonville, FL. USA.

Buttsworth, David R. and Saleh, Khalid and Yusaf, Talal (2009) Discrete particle simulation for the initial stages of ice accretion in aircraft engines: initial model development. In: 3rd International Conference on Energy and Environment (ICEE 2009), 7-8 December 2009, Malacca, Malaysia.

Apan, Armando and Phinn, Stuart and Maraseni, Tek (2009) Discrimination of remnant tree species and regeneration stages in Queensland, Australia using hyperspectral imagery. In: WHISPERS 2009: Evolution in Remote Sensing, 26-28 Aug 2009, Grenoble, France.

Epaarachchi, J. A. and Karunasena, W. and Aravinthan, T. (2009) Dynamic behavior of hybrid composite bridge girder. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Epaarachchi, Jayantha A. and Birt, Peter (2009) Dynamic behaviour of laterally loaded pultruted composite beams. In: 9th International Conference of the Mechanical and Physical Behaviour of Materials Under Dynamic Loading (DYMAT 2009), 7-11 Sept 2009, Brussels, Belgium.

Kamel, Fouad (2009) Economics of solar energy for diurnal electrical demand in South-East Queensland. In: AUPEC 2009: Sustainable Energy Technologies and Systems, 27-30 Sep 2009, Adelaide, South Australia.

Althaus, Kimberley and McKeering, Loretta M. and McHugh, Allen and Raine, Steven R. (2009) Effect of irrigation management on nitrate movement under a drip irrigated lettuce crop. In: SEAg 2009: Agricultural Technologies In a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Vandenbroucke, A. and Cardona, F. and Ku, H. and Rogers, D. (2009) Effects of chopped hemp on mechanical and thermal properties of epoxy resins. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Kamel, Fouad and Kist, Alexander A. (2009) End-user’s tools towards an efficient electricity consumption: the dynamic smart grid. In: SSEE 2009: Solutions for a Sustainable Planet, 22-24 Nov 2009, Melbourne, Australia .

Dorner, Wolfgang (2009) Environmental economic aspects of river basins and their catchment. Identification and quantification of flood related land use externalities. [Thesis (_PhD/Research)] (Unpublished)

Smith, R. J. and Gillies, Malcolm H. and Shanahan, Matthew and Campbell, B. and Williamson, Bill (2009) Evaluating the performance of bay irrigation in the GMID. In: Irrigation Australia 2009: Irrigation Australia Irrigation and Drainage Conference: Irrigation Today - Meeting the Challenge, 18-21 Oct 2009, Swan Hill, Victoria. (Unpublished)

Ismail, Siti Amni and Chen, Guangnan and Baillie, Craig and Symes, Troy (2009) Evaluation of energy usage for cotton ginning processes. In: SEAg 2009: Agricultural Technology in a Changing Climate, 13-16 Sep 2009, Brisbane, Queensland.

Hancock, Nigel and Symes, Troy (2009) EvapCalc – a modest-cost technique for real-time measurement of evaporation (and seepage) from farm dams. In: IWER 2009: International Workshop on Evaporation from Reservoirs, 9-11 Dec 2009, Gold Coast, Australia. (Unpublished)

McCarthy, Alison and Hancock, Nigel and Raine, Steven R. (2009) Exploration of data requirements for adaptive control of irrigation scheduling. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Omar, T. and Aravinthan, T. (2009) Fibre composite wind mill structure - investigations and design considerations. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Leonard, L. W. H. and Wong, K. J. and Low, K. O. and Yousif, B. F. (2009) Fracture behaviour of glass fibre-reinforced polyester composite. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 223 (2). pp. 83-89. ISSN 1464-4207

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao, eds. (2009) Futures in mechanics of structures and materials: proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), Toowoomba, Australia, 2-5 December 2008. Taylor & Francis (CRC Press), London, UK. ISBN 978-0-415-49196-9

Ahmed, Waqas and Gao, Jason and Zhou, Hong and Faulkner, Michael (2009) Goodput and channel allocation in opportunistic spectrum access networks. In: PIMRC 2009: 20th IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, 13-16 Sep 2009, Tokyo, Japan.

Wandel, Andrew P. and Lindstedt, R. Peter (2009) Hybrid binomial Langevin-multiple mapping conditioning modeling of a reacting mixing layer. Physics of Fluids, 21 (1). 015103-015116. ISSN 1070-6631

Padhi, Jyotiprakash (2009) Incorporating spatial variability in soil and crop properties for effective irrigation. [Thesis (_PhD/Research)] (Unpublished)

Mossad, Ruth and Vella, Anthony and Balusu, Rao (2009) Inertisation of highwall mining to control methane concentrations at the Moura mine. In: 7th International Conference on Computational Fluid Dynamics in the Minerals and Process Industries (CFD2009), 9-11 Dec 2009, Melbourne, Australia.

Venkatesh, V. C. and Yousif, B. F., eds. (2009) International Journal of Precision Technology, Vol. 1, No. 2, 2009. Inderscience Enterprises Ltd., United Kingdom.

Karunasena, W. and Leitch, C. J. (2009) Investigation on role and function of noggings in residential timber frame construction. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Goh, Steven (2009) Is the current practice in engineering education a sustainable model for creating sustainability-trained engineers. In: SSEE 2009: Solutions for a Sustainable Planet, 22-24 Nov 2009, Melbourne, Australia.

Smith, R. J. and Raine, Steven R. and McCarthy, Alison and Hancock, Nigel (2009) Managing spatial and temporal variability in irrigated agriculture through adaptive control. Australian Journal of Multi-Disciplinary Engineering, 7 (1). pp. 79-90. ISSN 1448-8388

Manalo, A. C. and Mutsuyoshi, H. and Asamoto, S. and Aravinthan, T. and Matsui, T. (2009) Mechanical behavior of hybrid FRP composites with bolted joints. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Wang, Hao and Ning, Zhiliang and Liang, W. Z. and Cao, Fuyang and Sun, Jianfei (2009) Microstructure and properties of Mg-Nd-Zn-Zr alloys. In: 4th International Light Metals Technology Biennial Conference (LMT2009), 29 June - 1 July 2009, Gold Coast, Australia.

Dahmani, L. and Khennane, A. and Kaci, S. (2009) Modeling and influence of shear retention parameter on the response of reinforced concrete structural elements. Strength of Materials, 41 (4). pp. 423-430. ISSN 0039-2316

Padhi, Jyotiprakash and Misra, R. K. (2009) Monitoring spatial variation of soil moisture in crop fields with EM38. In: Irrigation Australia 2009: Irrigation Australia Irrigation and Drainage Conference: Irrigation Today - Meeting the Challenge, 18-21 Oct 2009, Swan Hill, Australia.

Nguyen-Ky, T. and Wen, Peng and Li, Yan (2009) Monitoring the depth of anesthesia using discrete wavelet transform and power spectral density. In: RSKT 2009: 4th International Conference on Rough Sets and Knowledge Technology, 14-16 Jul 2009, Gold Coast, Australia.

Chong, Albert K. (2009) New developments in medical photogrammetry. Geoinformation Science Journal, 9 (1). pp. 41-50. ISSN 1511-9491

Mossad, Ruth and Yang, William and Schwarz, M. Philip (2009) Numerical prediction of air flow in a sharp 90 degree elbow. In: 7th International Conference on Computational Fluid Mechanics in the Minerals and Process Industries (CFD2009), 9-11 Dec 2009, Melbourne, Australia.

Mossad, R. R. (2009) Numerical predictions of air temperature and velocity to assist in the design of free ventilation piggeries. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2009) On the use of integrated radial basis function schemes in weighted residuals statements for elliptic problems. In: 31st International Conference on Boundary Elements and Other Mesh Reduction Methods (BEM/MRM 31), 2-4 Sep 2009, New Forest, UK.

Mossad, Ruth (2009) Optimization of the ventilation system for a forced ventilation piggery. Journal of Green Building, 4 (4). pp. 113-133. ISSN 1552-6100

Basnet, Badri Bahadur and Brodie, Lyn and Worden, John (2009) Peer assessment of assignments - the USQ experience. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Adnan, Muhammad and She, Haoqiu and Wang, Yafeng and Yang, Dacheng and Xiang, Wei (2009) Performance of co-operative relay for multicast multi-hop networks using virtual MIMO. In: IEEE International Conference on Advanced Infocomm Technology (ICAIT09), 7-9 July 2009, Xi'an, China.

White, Simon C. and Raine, Steven R. (2009) Physiological response of cotton to a root zone soil moisture gradient: implications for partial root zone drying irrigation. Journal of Cotton Science, 13 (2). pp. 67-74. ISSN 1523-6919

Kamel, Fouad (2009) Potential contribution of solar energy towards electrical peak demands in South-East Queensland. In: SSEE 2009: Solutions for a Sustainable Planet , 22-24 Nov 2009, Melbourne, Australia .

Wen, Chin Chee and Yousif, B. F. (2009) Potential of kenaf fibres as reinforcement for tribological applications. Wear, 267 (9-10). pp. 1550-1557. ISSN 0043-1648

Davis, R. J. and Baillie, Craig and Schmidt, Erik (2009) Precision agriculture technologies - relevance and application to sugarcane production. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Achmad, Mahmud (2009) Predicting the effects of mechanical destratifiers on water quality in Toowoomba’s reservoirs. [Thesis (_PhD/Research)] (Unpublished)

Seilsepour, Mohsen and Rashidi, Majid and Khabbaz, Borzoo Ghareei (2009) Prediction of soil exchangeable sodium percentage based on soil sodium adsorption ratio. American-Eurasian Journal of Agricultural and Environmental Sciences, 5 (1). pp. 1-4. ISSN 1818-6769

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao (2009) Preface to futures in mechanics of structures and materials conference. ACMSM20. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Gibbings, Peter and Bruce, Christine and Lidstone, John (2009) Problem-based learning (PBL) in virtual space: developing experiences for professional development. VDM Verlag Dr Muller, Berlin, Germany. ISBN 978-3-639-16314-8

Russell, Julian and Xiang, Wei (2009) Pulse shaping in MIMO COFDM over Rayleigh fading channels. In: ICWMC 2009: 5th International Conference on Wireless and Mobile Communications, 23-29 Aug 2009, Cannes, France.

Schmidt, Erik (2009) Reducing evaporation losses - opportunities for cost effective water savings. In: Irrigation Australia 2009: Irrigation Australia Irrigation and Drainage Conference: Irrigation Today - Meeting the Challenge, 18-21 Oct 2009, Swan Hill, Australia.

Masser, Ian and McDougall, Kevin (2009) Regional SDIs in Australia. In: Advanced Regional SDIs Workshop, 19-20 May 2008, Ispra, Italy.

Misra, R. K. and Patel, Jishiv H. and Baxi, V. R. (2009) Removal of pollutants by tomato plants during reuse of laundry greywater for irrigation. In: International Conference on Food Security and Environmental Sustainability (FSES 2009), 17-19 December 2009, Kharagpur, India.

Rashidi, Majid and Gholami, Mohammad and Ghareei Khabbaz, Borzoo (2009) Response of yield and yield components of tomato (Lycopersicon esculentum) to different tillage methods. International Journal of Agriculture and Biology, 11 (5). pp. 626-630. ISSN 1560-8530

Lam-Dao, Nguyen (2009) Rice crop monitoring using new generation Synthetic Aperture Radar (SAR) imagery. [Thesis (_PhD/Research)] (Unpublished)

Zheng, Aoyang and Wang, Yafeng and Yang, Dacheng and Xiang, Wei (2009) Self-adapting cyclic delay diversity system. In: RSKT 2009: 4th International Conference on Rough Set and Knowledge Technology , 14-16 Jul 2009, Gold Coast, Australia.

Eckard, Lawrence Francois (2009) Setting up an engineering asset management system for a small local government council. [USQ Project] (Unpublished)

Brink, Gavin and Symes, Troy and Pittaway, Pam and Hancock, Nigel and Pather, Selvan and Schmidt, Erik (2009) Smart monolayer application and management to reduce evaporation on farm dams - formulation of a universal design framework. In: 2009 Environmental Research Event, 10-13 May 2009, Noosa, Australia. (Unpublished)

Paudyal, Dev Raj and McDougall, Kevin and Apan, Armando (2009) Spatial data infrastructure for catchment management: a case study of Condamine Catchment, Australia. Indian Cartographer, 28 . pp. 439-444. ISSN 0972-8392

Hasna, Abdallah M. (2009) Sustainability and economic theory: an organism in premise. International Journal of Knowledge, Culture and Change Management, 9 (11). pp. 1-13. ISSN 1447-9524

Hasna, Abdallah M. (2009) Sustainability philosophy in engineering context: review and discussion. [Thesis (_PhD/Research)] (Unpublished)

Kim, Ho Sung and Islam, Md Mainul (2009) Syntactic foams as building materials consisting of inorganic hollow microspheres and starch binder. In: Cornejo, Donald N. and Haro, Jason L., (eds.) Building materials: properties, performance and applications. Nova Science Publishers, Inc., New York, USA. ISBN 978-1-60741-082-9

Cardona, F. and Moscou, C. (2009) Synthesis and characterization of modified phenolic resins for composites with enhanced mechanical properties. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Yousif, B. F. and Nirmal, Singh Gill and Lau, Saijod T. W. and Devadas, Alvin (2009) The potential of using betelnut fibres for tribo-polyester composites considering three different orientations. In: ASME 2008 International Mechanical Engineering Congress and Exposition (IMECE2008), 31 Oct - 06 Nov 2008, Boston, Massachusetts, USA.

Jensen, Troy and Apan, Armando and Zeller, Leslie (2009) The use of a UAV as a remote sensing platform in agriculture. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Pather, Selvan and Wang, Hao (2009) The use of simulated games in an undergraduate course manufacturing processes. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia.

Yusaf, Talal and Najafi, Gholamhassan and Buttsworth, David R. (2009) Theoretical and experimental investigation of SI engine performance and exhaust emissions using ethanol-gasoline blended fuels. In: 3rd International Conference on Energy and Environment (ICEE2009), 7-8 December 2009, Malacca, Malaysia.

Ahmed, Waqas and Gao, Jason and Zhou, Hong and Faulkner, Michael (2009) Throughput and proportional fairness in cognitive radio networks. In: ATC 2009: 2nd International Conference on Advanced Technologies for Communications, 12-14 Oct 2009, Hai Phong, Vietnam.

Hancock, Nigel and Pittaway, Pam and Symes, Troy (2009) Towards a biophysical understanding of observed performance of evaporation suppressant films applied to agricultural water storages - first analyses. In: SEAg 2009: Agricultural Technologies in a Changing Climate, 13-16 Sep 2009, Brisbane, Australia.

Brink, Gavin and Wandel, Andrew P. and Hancock, Nigel and Pather, Selvan (2009) Towards adaptive operational requirements for optimal application of evaporation-suppressing monolayer to reservoirs via a 'universal design framework'. In: IWER 2009: International Workshop on Evaporation from Reservoirs , 9-11 Dec 2009, Gold Coast, Australia.

Xiang, Wei and Goh, Steven C. and Pather, Selvan and Maxwell, Andrew Douglas and Wang, Hao and Ku, Harry S. (2009) Use of wireless tablet PCs as an effective learning and teaching enhancement tool. In: EDUCAUSE Australasia Conference 2009, 3-6 May 2009, Perth, Western Australia.

Wandel, Andrew P. (2009) Utilising tablet PCs in tutorials to aid external students. In: AaeE 2009: Engineering the Curriculum, 6-9 Dec 2009, Adelaide, Australia .

McDougall, Kevin (2009) Volunteered geographic information for building SDI. In: 2009 Surveying and Spatial Sciences Institute Biennial International Conference: Spatial Diversity (SSC 2009), 28 Sep-2 Oct 2009, Adelaide, Australia.

Gibbings, Peter and Lidstone, John and Bruce, Christine (2009) What student attributes affect experience of PBL in virtual space? In: REES 2009: Research in Engineering Education Symposium, 20-23 Jul 2009, Cairns, Australia.

Cheng, Sha and Lau, Kin-Tak and Liu, Tao and Zhao, Yong-Qing and Lam, Pou-Man and Yin, Yasheng (2009) Mechanical and thermal properties of chicken feather fiber/PLA green composites. Composites Part B: Engineering, 40 (7). pp. 650-654. ISSN 1359-8368

2008

Teng, Lanzhi and Wen, Peng and Xiang, Wei (2008) Model-based networked control system stability based on packet drop distributions. In: ICARCV 2008: 10th International Conference on Control, Automation, Robotics and Vision, 17-20 Dec 2008, Hanoi, Vietnam.

Aravinthan, Thiru, ed. (2008) Fibre composites in civil infrastructure - past, present and future. University of Southern Queensland, Toowoomba, Australia.

Lear, Foster Robert (2008) Hoist system for small boat stacker. [USQ Project] (Unpublished)

Goh, Steven (2008) A new paradigm for professional development framework and curriculum renewal in engineering management education: a proposal for reform. In: AaeE 2008: To Industry and Beyond, 07-10 Dec 2008, Yeppoon, Queensland, Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2008) A second-order continuity domain-decomposition technique based on integrated Chebyshev polynomials for two-dimensional elliptic problems. Applied Mathematical Modelling, 32 (12). pp. 2851-2862. ISSN 0307-904X

Brodie, Lyn (2008) Assessment strategy for virtual teams undertaking the EWB Challenge. In: AaeE 2008: To Industry and Beyond, 07-10 Dec 2008, Yeppoon, Queensland, Australia.

Zeller, Leslie Charles (2008) Development of automated turf testing equipment for playing surfaces. [Thesis (_PhD/Research)] (Unpublished)

Karunasena, W. (2008) Elastodynamic reciprocity relations for wave scattering by flaws in fiber-reinforced composite plates. Journal of Mechanics of Materials and Structures, 3 (10). pp. 1831-1846. ISSN 1559-3959

Hoque, M. A. and Aravinthan, V. and Pradhan, N. M. (2008) Evaluation of simultaneous storage and growth model to explain aerobic biodegradation of acetate. In: ISBT 2008: 1st International Society of BioTechnology Conference, 28-30 Dec 2008, Gangtok, India.

Shiau, Jim S. and Augarde, Charles E. and Lyamin, Andrei V. and Sloan, Scott W. (2008) Finite element limit analysis of passive earth resistance in cohesionless soils. Soils and Foundations, 48 (6). pp. 843-850. ISSN 0038-0806

Buttsworth, David R. and Malpress, Ray and Phythian, Mark W. (2008) Hardware-based engineering problem solving for on-campus and external teams. In: AaeE 2008: To Industry and Beyond, 07-10 Dec 2008, Yeppoon, Queensland, Australia.

Goh, Steven C. and Coaker, Warren and Thorpe, David (2008) How engineers become CEOs: implications for education and training. Journal of Achievements in Materials and Manufacturing Engineering, 31 (2). pp. 846-852. ISSN 1734-8412

Phythian, Mark W. and Das Gupta, Jishu (2008) Hyperlinked concept map enhancements for electronic study materials. In: AaeE 2008: To Industry and Beyond, 07-10 Dec 2008, Yeppoon, Queensland, Australia.

Ahfock, Tony L. and Buttsworth, David R. and Phythian, Mark W. and Maxwell, Andrew Douglas (2008) Infrastructure for remotely accessible laboratories at the University of Southern Queensland. In: AaeE 2008: To Industry and Beyond, 07-10 Dec 2008, Yeppoon, Queensland, Australia.

Mai-Cao, Lan (2008) Meshless radial basis function method for unsteady incompressible viscous flows. [Thesis (_PhD/Research)] (Unpublished)

Hoque, M. A. and Aravinthan, V. and Porter, M. (2008) Respirometric and titrimetric techniques for monitoring aerobic biodegradation of surfactant. In: ISBT 2008: 1st International Society of BioTechnology Conference, 28-30 Dec 2008, Gangkor, India.

Cochrane, Sandra and Brodie, Lyn and Pendlebury, Greg (2008) Successful use of a wiki to facilitate virtual teamwork in a problem-based learning environment. In: AaeE 2008: To Industry and Beyond, 07-10 Dec 2008, Yeppoon, Queensland, Australia.

Ku, H. and Jacobson, W. and Trada, M. and Cardona, F. and Rogers, D. (2008) Tensile tests of phenol formaldehyde SLG reinforced composites: pilot study. Journal of Composite Materials, 42 (26). pp. 2783-2793. ISSN 0021-9983

Gibbings, Peter and Lidstone, John and Bruce, Christine (2008) Using student experience of problem-based learning in virtual space to drive engineering educational pedagogy. In: AaeE 2008: To Industry and Beyond, 7-10 Dec 2008, Yeppoon, Australia.

Nguyen-Van, Hieu and Le, Thong and Mai-Duy, Nam and Tran-Cong, Thanh (2008) Nodal integration finite element techniques for analysis of piezoelectric solids. In: 2008 International Conference on Computational Solid Mechanics (CSM2008), 27-30 Nov 2008, Ho Chi Minh City, Vietnam.

Kamel, Fouad (2008) Design approach for photovoltaic power stations for demand-side requirements and competitive energy cost. In: 3rd International Solar Energy Society Conference, Asia Pacific Region (ISES-AP 2008), incorporating the 46th Annual Conference of the Australian and New Zealand Solar Energy Society (Solar08), 25-28 Nov 2008, Sydney, Australia.

Shiau, J. S. and Watson, J. F. (2008) 3D bearing capacity of shallow foundations located near deep excavation sites. In: 2008 International Conference on Deep Excavation: Challenges Risk Management of Underground Construction (ICDE 2008), 10-12 Nov 2008, Singapore.

Goh, Steven C. and Thorpe, David (2008) A reflection in the innovation and technology transfer experience in a regional micro-manufacturer: a case study. In: 9th Global Congress on Manufacturing & Management (GCMM2008), 12-14 Nov 2008, Surfers Paradise, Queensland, Australia.

Bordas, Stephane and Duflot, Marc and Le, Phong (2008) A simple error estimator for extended finite elements. Communications in Numerical Methods in Engineering, 24 (11). pp. 961-971. ISSN 1069-8299

Arnold, Matthew David (2008) A two-dimensional analysis of the bearing capacity of footings near slopes. [USQ Project] (Unpublished)

Padda, Ranjit Singh (2008) Air flow through two layered mesh at varying porosity and spacing. [USQ Project] (Unpublished)

Mai-Duy, Nam and See, Howard and Tran-Cong, Thanh (2008) An integral-collocation-based fictitious-domain technique for solving elliptic problems. Communications in Numerical Methods in Engineering, 24 (11). pp. 1291-1314. ISSN 1069-8299

Wen, P. and Lu, T.-W. (2008) Decoupling control of a twin rotor MIMO system using robust deadbeat control technique. IET Control Theory and Applications, 2 (11). pp. 999-1007. ISSN 1751-8644

Taylor, Scott (2008) Development and testing of a portable GNSS network solution using the magellan propark3. [USQ Project] (Unpublished)

Vincec, Paul Michael (2008) Feasibility study: into the design, effectiveness & limitations of installing raingardens within an inner urban environment. [USQ Project] (Unpublished)

Goh, Steven C. and Coaker, Warren and Thorpe, David (2008) How engineers become CEOs: implications for education and training. In: 9th Global Congress on Manufacturing and Management (GCMM2008), 12-14 Nov 2008, Surfers Paradise, Queensland, Australia.

Walton, Joshua Graeme (2008) Investigation of a variable ride height suspension for an automobile. [USQ Project] (Unpublished)

Watson, Joshua Francis (2008) Investigation of the bearing capacity of shallow footings located near slopes. [USQ Project] (Unpublished)

Cleary, Edward Thomas (2008) Pulsed liquid jet for rock breaking. [USQ Project] (Unpublished)

Golshani, Aliakbar and Tran-Cong, Thanh (2008) Simulation of hydraulic fracturing in brittle rocks. In: ISRM International Symposium 2008: 5th Asian Rock Mechanics Symposium, 24-26 Nov 2008, Tehran, Iran.

Jensen, Troy (2008) Using remotely controlled platform to acquire low-altitude imagery for grain crop mapping. [Thesis (_PhD/Research)] (Unpublished)

Golshani, Aliakbar and Tran-Cong, Thanh and Buttsworth, David (2008) Impact on a water filled cylinder. In: ACMFMS 2008: Asian Conference on Mechanics of Functional Materials and Structures, 31 Oct-3 Nov 2008, Matsue, Japan.

Jesshope, Ashlee Elizabeth (2008) Bike tour plan for Toowoomba region. [USQ Project] (Unpublished)

Yavu, Isei Ledua (2008) Fracture toughness of phenolic resins composite by using saw dust as filler of percentage by weight. [USQ Project] (Unpublished)

Shann, Blaise N. (2008) Variable rate bitumen spraying in road construction and resurfacing. [USQ Project] (Unpublished)

Noor, M. M. and Kadirgama, K. and Devarajan, R. and Rejab, M. R. M. and Zuki, N. M. and Yusaf, Talal (2008) Development of a high pressure compressed natural gas mixer for a 1.5 litre CNG-diesel dual engine. In: National Conference on Design and Concurrent Engineering (DECON) 2008, 28-29 Oct 2008, Melaka Malaysia, Malaysia.

Heng, Fook Hai (2008) 3D Terrestrial laser scanning for application in earthwork and topographical surveys. [USQ Project] (Unpublished)

Dorahy, Will Paul (2008) A comparison of remotely sensed terrestrial spatial information. [USQ Project] (Unpublished)

Mayo, Benjamin Marc (2008) A Review of a cadastral boundary adjustment software program. [USQ Project] (Unpublished)

Mai-Duy, Nam and Tran-Cong, Thanh (2008) An efficient domain-decomposition pseudo-spectral method for solving elliptic differential equations. Communications in Numerical Methods in Engineering, 24 (10). pp. 795-806. ISSN 1069-8299

Boskovic, Selina (2008) Bioretention basin best practice design guidelines. [USQ Project] (Unpublished)

Miller, P. (2008) Building a two wheeled balancing robot. [USQ Project] (Unpublished)

Gardner, Craig (2008) Carbon nanotubes (CNT) as potentially a more effective material for photovoltaic (PV) converters. [USQ Project] (Unpublished)

Thompson, Robert William (2008) Centreline tools upgrade. [USQ Project] (Unpublished)

Crawford-Ross, Michael Richard (2008) Control of accumulator in a continuous processing line. [USQ Project] (Unpublished)

Long, Geoffrey Michael (2008) Deriving land use and land cover maps from 2.5m SPOT 5 imagery. [USQ Project] (Unpublished)

Steger, Jason P. (2008) Deriving transformation parameters for existing survey co-ordinate systems in the Australian Capital Territory. [USQ Project] (Unpublished)

Pijpers, Louis Kennedy (2008) Design and implementation of a microprocessor-controlled BMX start gate. [USQ Project] (Unpublished)

Springall, Glenn (2008) Design and implementation of a remotely accesible inrush current testing package for power (distribution)transformers. [USQ Project] (Unpublished)

Strong, Simon James (2008) Design of a small wind turbine. [USQ Project] (Unpublished)

Howard, Damian John (2008) Determination of property boundaries in NSW where monument movement has occurred. [USQ Project] (Unpublished)

Alanne, Glen (2008) Developing a model to predict water main failures. [USQ Project] (Unpublished)

Zhuge, Yan (2008) Distinct element modelling of unreinforced masonry wall under seismic loads with and without cable retrofitting. Transactions of the Tianjin University, 14 (supp. 1). pp. 471-475. ISSN 1006-4982

Hetherington, Chris (2008) Effectiveness of real time kinematic global navigation satellite system suveying (RTK GNSS). [USQ Project] (Unpublished)

McHugh, A. D. and Bhattarai, S. and Lotz, G. and Midmore, D. J. (2008) Effects of subsurface drip irrigation rates and furrow irrigation for cotton grown on a vertisol on off-site movement of sediments, nutrients and pesticides. Agronomy for Sustainable Development, 28 (4). pp. 507-519. ISSN 1774-0746

Clemence, Andrew John (2008) Error resilient JPEG2000 transmission over wireless fading channels. [USQ Project] (Unpublished)

Sawchuk, Mike (2008) Flexural strength SLG-reinforced phenolic composites cured in microwaves. [USQ Project] (Unpublished)

Mendis, Marina Shanil (2008) Functional observer for glucose regulation. [USQ Project] (Unpublished)

Curran, Liam Patrick (2008) Global navigation satellite systems for geodetic network surveys. [USQ Project] (Unpublished)

Pickford, Jeffrey (2008) How to establish map projections to facilitate the use of GPS on ground-based surveys. [USQ Project] (Unpublished)

Paech, Simon (2008) Human electromagnetic radiation exposure. [USQ Project] (Unpublished)

Stevenson, Cameron Laurence (2008) Improving information management & project proposal automation at Data#3. [USQ Project] (Unpublished)

Zhu, Z. W. and Zhang, H. F. and Wang, H. and Ding, B. Z. and Hu, Z. Q. (2008) Influence of casting temperature on the thermal stability of Cu- and Zr-based metallic glasses: theoretical analysis and experiments. Journal of Materials Research, 23 (10). pp. 2714-2719. ISSN 0884-2914

Donohue, Rachael Michelle (2008) Inspiring high precision dam water depth measurement with novel 'bubbler’ designs. [USQ Project] (Unpublished)

Gibson, Duane Nikalia (2008) Interaction of recycled concrete and geogrid reinforcement material 14m high reinforced earth wall. [USQ Project] (Unpublished)

Cecil, Travis (2008) Investigate the best percentage by weight of glass powder, as fillers in phenolic resins using tensile tests. [USQ Project] (Unpublished)

Hardy, Glen (2008) Investigation into the performance of first flush systems for diesel engine based pollution on roof runoff. [USQ Project] (Unpublished)

Walters, Kieren A. (2008) Investigation of construction practices and test procedures for road pavements on expansive subgrades. [USQ Project] (Unpublished)

Mead, Nicola (2008) Investigation of domestic water end use. [USQ Project] (Unpublished)

Zong, Xuejin (2008) Investigation of the best percentage by weight of glass powder as fillers, in phenolic resins using flexural tests. [USQ Project] (Unpublished)

Nixon, Robert Jeffrey (2008) Investigation of the best percentage, by weight, of glass powder as filler in phenolic resin using three point bending test. [USQ Project] (Unpublished)

Huston, Thomas Clifford (2008) Investigation on the adequacy of disinfection in Toowoomba's water supply network. [USQ Project] (Unpublished)

Bissett, Michael James (2008) Investigation on utilising real time kinematic (RTK) global navigation satellite systems (GNSS) for electronic distance measurement (EDM) baseline calibration and traceability of measurement. [USQ Project] (Unpublished)

Menetrier, Paul L. (2008) Machine vision based traffic monitoring with real time tracking. [USQ Project] (Unpublished)

Islam, Md Mainul and Kim, Ho Sung (2008) Manufacture of syntactic foams using starch as binder: post-mold processing. Materials and Manufacturing Processes, 23 (8). pp. 884-892. ISSN 1042-6914

Kelman, Oliver (2008) Measuring and monitoring of grain silos using laser scanning and total stations. [USQ Project] (Unpublished)

Quoc, Van Nguyen (2008) Numerical modelling of the undrained vertical bearing capacity of shallow foundations. [Thesis (_PhD/Research)] (Unpublished)

Salomon, David Scott (2008) Position control using a digital servo system. [USQ Project] (Unpublished)

Rohde, Craig (2008) Preliminary water balance models of the Daly river catchment. [USQ Project] (Unpublished)

Ku, H. and Cardona, F. and Ball, J. and Jacobson, W. and Trada, M. (2008) Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study. Journal of Composite Materials, 42 (19). pp. 2083-2095. ISSN 0021-9983

Whiteford, Mark (2008) Relationship contracting in the mineral processing industry. [USQ Project] (Unpublished)

Lamari, Alfio Concetto (2008) Rolling stock bearing condition monitoring systems. [USQ Project] (Unpublished)

Rallabandi, Venkateswara Rao and Rallabandi, V. P. Subramanyam (2008) Rotation-invariant texture retrieval using wavelet-based hidden Markov trees. Signal Processing, 88 (10). pp. 2593-2598. ISSN 0165-1684

Taylor, Timothy Noel (2008) Rural arterial road operating speed assessment. [USQ Project] (Unpublished)

Tart, Benjamin (2008) Simulation of GPS car navigation systems in evaluating the impact of poor quality road data. [USQ Project] (Unpublished)

Harris, Bruce Robert (2008) South East Queensland waterways, land use and slope analysis. [USQ Project] (Unpublished)

Hugo, David (2008) Speech compression system for student feedback. [USQ Project] (Unpublished)

Muorwel, Reec Rodolfo (2008) Supervisory control of material handling conveyor belt system. [USQ Project] (Unpublished)

Shekhar, Shashi (2008) Tensile strength of sawdust reinforced phenolic resin composite materials. [USQ Project] (Unpublished)

Cech, Samuel (2008) The commercial implications of the NZ surveyor-general's rules for cadastral survey 2008. [USQ Project] (Unpublished)

Prasser, Nathan (2008) The development of a computer based system for the rehabilitation of arm movements of stroke patients. [USQ Project] (Unpublished)

Carden, Scott Benjamin (2008) The development of an antigravity arm to assist in the rehabilitation of stroke patients. [USQ Project] (Unpublished)

Goodall, Joshua Edward Allan (2008) The effect of the 50km/h implementation on local streets in Toowoomba. [USQ Project] (Unpublished)

Drysdale, Dirk MacDonald (2008) The effectiveness of an aerofoil shaped pier reducing down stream vortices and turbulance. [USQ Project] (Unpublished)

Campbell, Glenn and Phinn, Stuart (2008) The efficacy of band weighting schemes for improving the accuracy and precision of water quality parameters estimated from MERIS and MODIS image data. In: 14th Australasian Remote Sensing and Photogrammetry Conference incorporating the North Australian Remote Sensing and GIS Conference, 29 Sept - 03 Oct 2008, Darwin, Australia.

Waldock, David A. (2008) The maintenance of 'moment continuity' within structural concrete beam steps. [USQ Project] (Unpublished)

Adams, Nicholas John (2008) The pedestrianisation of inner city Toowoomba. [USQ Project] (Unpublished)

Simmons, Shane (2008) The unintended consequences of academic study in a resources boom. In: 2008 SSIQ Northern Group Regional Conference, Oct 2008, Townsville, Australia. (Unpublished)

Ole, Zayne Kristian (2008) Track stability and buckling - rail stress management. [USQ Project] (Unpublished)

Shellshear, Michael Stuart (2008) Urban stormwater treatment using chitosan. [USQ Project] (Unpublished)

Watt, Andrew Thomas (2008) Validation of cooling grid model and testing of alternatives. [USQ Project] (Unpublished)

Black, Jamie Richard (2008) Validation of the Sydnet, continuously operating reference stations for use in global navigation satellite system surveying. [USQ Project] (Unpublished)

Marais, Tom (2008) Virtual reference station (VRS) in South Africa. [USQ Project] (Unpublished)

Kenna, Brian (2008) Water metering and revenue protection. [USQ Project] (Unpublished)

Mai-Duy, Nam and Tran-Cong, Thanh (2008) A multidomain integrated-radial-basis-function collocation method for elliptic problems. Numerical Methods for Partial Differential Equations, 24 (5). pp. 1301-1320. ISSN 0749-159X

Cheung, Hoi-Yan and Lau, Kin-tak and Tao, Xiao-Ming and Hui, David (2008) A potential material for tissue engineering: silkworm silk/PLA biocomposite. Composites Part B: Engineering, 39 (6). pp. 1026-1033. ISSN 1359-8368

Wai-Ming, Yeung (2008) Confirmation program of safety inspection of lift components (CPSI). [USQ Project] (Unpublished)

Craig, Ian (2008) Loss of storage water through evaporation with particular reference to arid and semi-arid zone pastoralism in Australia (Working paper no. 19, the WaterSmart™ Literature Reviews). Working Paper. Desert Knowledge CRC, Alice Springs, NT, Australia.

Amir, Al-Falahi and Yusoff, M. Z. and Yusaf, T. (2008) Numerical simulation of inviscid transient flows in shock tube and its validations. In: ICFM 2008: 5th International Conference on Fluid Mechanics, 12-14 Sep 2008, Heidelberg, Germany.

Mai-Duy, Nam and Le-Cao, Khoa and Tran-Cong, Thanh (2008) A Cartesian grid technique based on one-dimensional integrated radial basis function networks for natural convection in concentric annuli. International Journal for Numerical Methods in Fluids, 57 (12). pp. 1709-1730. ISSN 0271-2091

Brodie, L. M. and Porter, M. (2008) Engaging distance and on-campus students in problem based learning. European Journal of Engineering Education, 33 (4). pp. 433-443. ISSN 0304-3797

Shiau, Jim S. and Thomas, Caroline J. and Smith, Catherine A. (2008) A FLAC model for classical earth pressure problems. In: 1st International FLAC/DEM Symposium on Numerical Modeling, 25-27 Aug 2008, Minneapolis, United States.

Shiau, Jim S. and Watson, Joshua F. and Smith, C. A. (2008) Foundation located near slope: a FLAC study. In: 1st International FLAC/DEM Symposium on Numerical Modeling, 25-27 Aug 2008, Minneapolis, USA.

Ku, H. and Cardona, F. and Rogers, D. and Vandenbroucke, A. (2008) Effects of EPON on mechanical and thermal properties of epoxy resins. In: ICMMSE 2008: International Conference on Multifunctional Materials and Structures, 28-31 Jul 2008, Hong Kong.

Billingsley, John (2008) Innovative mechatronic technologies in horticultural systems. In: The 2008 National and Trans-Tasman Horticultural Science Conference, 21-23 July 2008, Surfers Paradise, Queensland. (Unpublished)

Teng, Lanzhi and Wen, Peng (2008) Data missing and make-up work studies over a PIDn networked control system. In: MSV 2008: International Conference on Modeling, Simulation and Visualization Methods , 14-17 Jul 2008, Las Vegas NV. USA.

Liu, Xiaoye and Zhang, Zhenyu (2008) LIDAR data reduction for efficient and high quality DEM generation. In: XXI Congress of the International Society of Photogrammetry and Remote Sensing (ISPRS 2008), 3-11 Jul 2008, Beijing, China.

Zhang, Z. and Peterson, J. and Zhu, X. and Wright, W. (2008) Long term land use and land cover change and its impact on cool temperate rainforest in the Strzelecki Ranges, Australia. In: XXI Congress of the International Society of Photogrammetry and Remote Sensing (ISPRS 2008), 3-11 Jul 2008, Beijing, China.

Brodie, Ian (2008) Comparison of storage requirements for two different stormwater harvesting strategies. In: Stormwater 2008, 8-11 July 2008, Surfers Paradise, Australia.

Liu, Xiaoye and Zhang, Zhenyu (2008) Ground truth extraction from LiDAR data for image orthorectification. In: 2008 International Workshop on Earth Observation and Remote Sensing Applications, 30 Jun-2 Jul 2008, Beijing, China.

Goh, Steven C. and Thorpe, David (2008) An investigation into the innovation and technology transfer process in the SME sector within a university-industry collaboration context. Asian International Journal of Science and Technology in Production and Manufacturing, 1 (2). pp. 1-10. ISSN 1906-151X

Paudyal, Dev Raj and McDougall, Kevin (2008) Building spatial data infrastructure to support sustainable catchment management. In: Queensland Spatial Conference 2008, 17-19 July 2008, Surfers Paradise, Australia.

McDougall, Kevin and Liu, Xiaoye and Basnet, Badri Bahadur and Apan, Armando (2008) Digital elevation model accuracy requirements for catchment management. In: Queensland Spatial Conference 2008, 17-19 July 2008, Surfers Paradise, Australia.

Langat, P. K. and Smith, R. J. and Raine, S. R. (2008) Estimating the furrow infiltration characteristic from a single advance point. Irrigation Science, 26 (5). pp. 367-374. ISSN 0342-7188

Aravinthan, Thiru and Omar, Tarek (2008) Fibre composite windmill structure - challenges in the design and development. In: CICE 2008: 4th International Conference on FRP Composites in Civil Engineering, 22-24 Jul 2008, Zurich, Switzerland.

Apan, Armando and Wells, N. and Reardon-Smith, Kathryn and Richardson, L. and McDougall, Kevin and Basnet, Badri Bahadur (2008) Predictive mapping of blackberry in the Condamine Catchment using logistic regression and spatial analysis. In: Queensland Spatial Conference 2008, 17-19 July 2008, Surfers Paradise, Australia.

McDougall, Kevin (2008) Unlocking the potential of spatial information through data sharing: it's a two way street. In: Global Warning: What's Happening in Paradise, 17-19 Jul 2008, Gold Coast, Australia.

Fu, H. M. and Zhang, H. F. and Wang, H. and Hu, Z. Q. (2008) Cu-based bulk amorphous alloy with larger glass-forming ability and supercooled liquid region. Journal of Alloys and Compounds, 458 (1-2). pp. 390-393. ISSN 0925-8388

Liu, Xiaoye and Zhang, Zhenyu and Peterson, Jim and Chandra, Shobhit (2008) Large area DEM generation using airborne LiDAR data and quality control. In: 8th International Symposium on Spatial Accuracy Assessment in Natural Resources and Environmental Sciences, 25-27 June 2008, Shanghai, China.

Basnet, Badri (2008) Degree of site suitability measurement in a GIS: the effect of various standardization methods. In: 8th International Symposium on Spatial Accuracy Assessment in Natural Resources and Environmental Sciences, 25-27 June 2008, Shanghai, China.

Zhang, Z. and Peterson, J. and Zhu, X. and Wright, W. (2008) Revealing long term land use and land cover change in a severely disturbed environment. In: 8th International Symposium on Spatial Accuracy Assessment in Natural Resources and Environmental Sciences, 25-27 Jun 2008, Shanghai, China.

Munoz, J.-C. and Ku, H. and Cardona, F. and Rogers, D. (2008) Effects of catalysts and post-curing conditions in the polymer network of epoxy and phenolic resins: preliminary results. Journal of Materials Processing Technology, 202 (1-3). pp. 486-492. ISSN 0924-0136

Nguyen-Van, H. and Mai-Duy, N. and Tran-Cong, T. (2008) Free vibration analysis of laminated plate/shell structures based on FSDT with a stabilized nodal-integrated quadrilateral element. Journal of Sound and Vibration, 313 (1-2). pp. 205-223. ISSN 0022-460X

Wang, H. and Estrin, Y. and Zuberova, Z. (2008) Bio-corrosion of a magnesium alloy with different processing histories. Materials Letters, 62 (16). pp. 2476-2479. ISSN 0167-577X

Everingham, Yvette and Baillie, Craig and Inman-Bamber, Geoff and Baillie, Justine (2008) Forecasting water allocations for Bundaberg sugarcane farmers. Climate Research, 36 (3). pp. 231-239. ISSN 0936-577X

Paudyal, Dev Raj (2008) Pro-poor land management in developing countries: a case study in Nepal and India. Technical Report. International Federation of Surveyors (FIG), Copenhagen, Denmark . (Unpublished)

Yousif, B. F. (2008) Replacing of glass fibres with seed oil palm fibres for tribopolymeric composites. Tribology - Materials, Surfaces and Interfaces, 2 (2). pp. 99-103. ISSN 1751-5831

Somasundaraswaran, A. K. (2008) Results of surveys among drivers and customers of for-hire three-wheelers in five small towns in Sri Lanka. Asia Pacific Development Journal, 15 (1). pp. 119-135. ISSN 1020-1246

He, Jin and Li, Hongwen and McHugh, A. D. and Ma, Zhongming and Cao, Xinhui and Wang, Qingjie and Zhang, Xuemin and Zhang, Xirui (2008) Spring wheat performance and water use efficiency on permanent raised beds in arid northwest China. Soil Research, 46 (8). pp. 659-666. ISSN 0004-9573

Billingsley, John (2008) Some agricultural applications of machine vision. In: 2008 IEEE International Conference on Robotics and Automation (ICRA 2008), 19-23 May 2008, Pasadena, California.

Smith, Rod and Gillies, Malcolm H. and Newell, Geoffrey and Foley, Joseph P. (2008) A decision support model for travelling gun irrigation machines. Biosystems Engineering, 100 (1). pp. 126-136. ISSN 1537-5110

El-Tayeb, N. S. M. and Yousif, B. F. and Yap, T. C. (2008) An investigation on worn surfaces of chopped glass fibre reinforced polyester through SEM observations. Tribology International, 41 (5). pp. 331-340. ISSN 0301-679X

Dorner, W. and Porter, M. and Metzka, R. (2008) Are floods in part a form of land use externality? Natural Hazards and Earth System Sciences, 8 (3). pp. 523-532. ISSN 1561-8633

Zhao, Weichang and Pinnaduwage, Lal A. and Leis, John W. and Gehl, Anthony C. and Allman, Steve L. and Shepp, Allan and Mahmud, Ken K. (2008) Identification and quantification of components in ternary vapor mixtures using a microelectromechanical-system-based electronic nose. Journal of Applied Physics, 103 (10). pp. 1-11. ISSN 0021-8979

Islam, Md Mainul and Kim, Ho Sung (2008) Pre-mould processing for syntactic foams: modelling, theory and experiment. In: 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME-13), 27-29 May, 2008, Cairo, Egypt.

Fu, H. M. and Qiu, D. and Zhang, M. X. and Wang, H. and Kelly, P. M. and Taylor, J. A. (2008) The development of a new grain refiner for magnesium alloys using the edge-to-edge model. Journal of Alloys and Compounds, 456 (1-2). pp. 390-394. ISSN 0925-8388

Foley, Joseph P. (2008) Centre pivot and lateral move machines. In: Smith, Peter and Madden, Elizabeth, (eds.) WATERpak: a guide for irrigation management in cotton. Cotton Research and Development Corporation, Narrabri, Australia, pp. 195-220. ISBN 1-921025-16-6

Barnes, G. T. (2008) The potential for monolayers to reduce the evaporation of water from large water storages. Agricultural Water Management, 95 (4). pp. 339-353. ISSN 0378-3774

Goh, Steven C. (2008) The engineering manager of the 21st century: implications for education and professional development [Keynote address]. In: CELM Victoria Seminar Series (March 2008), 12 Mar 2008, Melbourne, Australia. (Unpublished)

Rong, Jian Hua and Liang, Qing Quan (2008) A level set method for topology optimization of continuum structures with bounded design domain. Computer Methods in Applied Mechanics and Engineering, 197 (17-18). pp. 1447-1465. ISSN 0045-7825

Amir, Al-Falahi and Yusoff, Mohd. Zamri bin and Yusaf, Talal (2008) Development of a short duration hypersonic test facility at Universiti Tenaga Nasional. Institution of Engineers, Malaysia. Journal, 69 (1). pp. 19-25. ISSN 0126-513X

Omar, Tarek (2008) Multi-pultrusion fibre composite truss systems for deployable shelters. PhD thesis, University of Southern Queensland.

Liang, Qing Quan (2008) Nonlinear analysis of short concrete-filled steel tubular beam-columns under axial load and biaxial bending. Journal of Constructional Steel Research, 64 (3). pp. 295-304. ISSN 0143-974X

Goh, S. and Ku, H. and Ang, S. L. (2008) Prediction of crushing stress in composite materials. Journal of Composite Materials, 42 (5). pp. 467-484. ISSN 0021-9983

Hussain, Amjed and Raine, Steven R. (2008) A preliminary evaluation of the potential to use electromagnetic induction to assess sprinkler irrigation performance in horticultural crops. In: 1st Global Workshop on High Resolution Digitial Soil Sensing and Mapping, 5-8 Feb 2008, Sydney, Australia.

Liu, Xiaoye (2008) Airborne LiDAR for DEM generation: some critical issues. Progress in Physical Geography: an international review of geographical work in the natural and environmental sciences, 32 (1). pp. 31-49. ISSN 0309-1333

Ku, Harry and Rogers, David and Davey, Robert and Cardona, Francisco and Trada, Mohan (2008) Fracture toughness of phenol formaldehyde composites: pilot study. Journal of Materials Engineering and Performance, 17 (1). pp. 85-90. ISSN 1059-9495

Ku, Harry S. and Yusaf, Talal (2008) Processing of composites using variable and fixed frequency microwave facilities. Progress in Electromagnetic Research B, PIERB 5 . pp. 185-205. ISSN 1937-6472

Lau, Kin-Tak and Cheung, Hoi-Yan and Lu, Jian Ping and Yin, Yan-Sheng and Hui, David and Li, Hu-Lin (2008) Carbon nanotubes for space and bio-engineering applications. Journal of Computational and Theoretical Nanoscience, 5 (1). pp. 23-35. ISSN 1546-1955

Ku, H. S. (2008) Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation. Journal of Electromagnetic Waves and Applications, 22 (1). pp. 69-84. ISSN 0920-5071

Yousif, B. F. and Tayeb, El and Yusaf, Talal (2008) Influence of material structure properties on sliding contact performance of CGRP composite. International Journal for Manufacturing Science and Technology, 10 (1). pp. 1-7. ISSN 1524-1548

Hare, Jenelle and White, Simon (2008) Variety and irrigation strategy: results from a Darling Downs trial. Australian Cottongrower, 28 (7). pp. 22-25. ISSN 0159-1290

Tavakkoli, Ehsan and Rengasamy, Pichu and McDonald, Glenn (2008) A critical analysis of osmotic and ionic effects of salinity in two barley cultivars. In: 14th Australian Agronomy Conference: Global Issues. Paddock Action, 21-25 Sept 2008, Adelaide, South Australia.

Rong, J. H. and Yi, J. H. and Liang, Q. Q. (2008) A level set method with maximum design domain limits. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Mai-Cao, L. and Tran-Cong, T. (2008) A meshless approach to capturing moving interfaces in passive transport problems. CMES: Computer Modeling in Engineering and Sciences, 31 (3). pp. 157-188. ISSN 1526-1492

Le, P. and Mai-Duy, N. and Tran-Cong, T. and Baker, G. (2008) A meshless modeling of dynamic strain localization in quasi-brittle materials using radial basis function networks. CMES: Computer Modeling in Engineering and Sciences, 25 (1). pp. 43-67. ISSN 1526-1492

Mai-Duy, N. and Tran-Cong, T. (2008) A meshless technique based on integrated radial basis function networks for elliptic partial differential equations. In: 4th International Workshop on Meshfree Methods for Partial Differential Equations, 17-20 Sep 2007, Bonn, Germany.

Mai-Duy, Nam and Tran-Cong, Thanh (2008) A multidomain integrated RBF collocation method for elliptic differential equations. In: 8th World Congress on Computational Mechanics (WCCM8), and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), 30 June - 4 July 2008, Venice, Italy.

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2008) A node-based element for analysis of planar piezoelectric structures. CMES: Computer Modeling in Engineering and Sciences, 36 (1). pp. 65-95. ISSN 1526-1492

Mai-Duy, Nam and Tran-Cong, Thanh (2008) A point-collocation method based on integrated Chebyshev polynomials for elliptic differential equations in irregular domains. In: 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), 30 June - 4 July 2008, Venice, Italy.

Hasna, Abdallah M. (2008) A review of sustainability assessment methods in engineering. The International Journal of Environmental, Cultural, Economic & Social Sustainability, 5 . ISSN 1832-2077

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2008) A smoothed four-node piezoelectric element for analysis of two-dimensional smart structures. CMES: Computer Modeling in Engineering and Sciences, 23 (3). pp. 209-222. ISSN 1526-1492

Chin, C. W. and Yousif, B. F. (2008) Adhesive and frictional behaviour of polymeric composites based on kenaf fibre. In: 2nd International Conference on Advanced Tribology (iCAT 2008), 3-5 Dec 2008, Singapore.

Danaelan, D. and Yousif, B. F. (2008) Adhesive wear performance of CFRP multilayered polyester composites under dry/wet contact conditions. Surface Review and Letters, 15 (6). pp. 919-925. ISSN 0218-625X

El-Tayeb, N. S. M. and Yousif, B. F. (2008) Adhesive wear performance of T-OPRP and UT-OPRP composites. Tribology Letters, 32 (3). pp. 199-208. ISSN 1023-8883

Mai-Duy, Nam and Tran-Cong, Thanh (2008) An effective high-order point-collocation numerical approach based on integrated approximants for elliptic differential equations. In: Alvarez, Matias P., (ed.) Leading-edge applied mathematical modeling research. Nova Science Publishers, Inc., New York, United States, pp. 215-250. ISBN 1-60021-977-2

Le, Phong and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2008) An IRBFN cartesian grid method based on displacement-stress formulation for 2D elasticity problems. In: 8th World Congress on Computational Mechanics (WCCM8) and ECCOMAS 2008, 30 June - 4 July 2008, Venice, Italy.

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2008) Analysis of piezoelectric solids with an efficient node-based element. In: 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), 30 June - 4 July 2008, Venice, Italy.

Gibbings, Peter and Brodie, Lyn (2008) Assessment strategy for an engineering problem-solving course. International Journal of Engineering Education, 24 (1 ). pp. 153-161. ISSN 0949-149X

Xiang, Wei and Otto, Colin W. and Wen, Peng (2008) Automated vehicle classification system using advanced noise reduction technology. In: 1st International Conference on Signal Processing and Communication Systems (ICSPCS 2007), 17-19 Dec 2007, Gold Coast, Australia.

Suntharavadivel, Thuraichamy Guganesan (2008) Behaviour of shear damaged reinforced concrete beams strengthened with external post-tensioning and clamping. [Thesis (_PhD/Research)] (Unpublished)

Cubero, Samuel N. (2008) Blind search inverse kinematics for controlling all types of serial-link robot arms. In: Billingsley, John and Bradbeer, Robin, (eds.) Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany, pp. 229-244. ISBN 978-3-540-74026-1

Chan, Auc Fai and Leis, John (2008) Comparison of weighted average and median filters for wireless retransmission timeout estimation. In: ICSPCS 2008: 2nd International Conference on Signal Processing and Communication Systems, 15-17 Dec 2008, Gold Coast, Australia.

Omar, Tarek and Aravinthan, Thiru (2008) Design and development of a fibre composite wind mill structure. In: Australasian Structural Engineering Conference 2008: Engaging with Structural Engineering, 26-27 June 2008, Melbourne, Vic, Australia.

McCarthy, Alison and Hancock, Nigel and Raine, Steven R. (2008) Development of a simulation framework for variable-rate irrigation of cotton. In: 14th Australian Cotton Conference: New Beginnings – Cotton in a Climate of Change , 12-14 Aug 2008, Broadbeach, Qld, Australia.

Zare, Dariush and Chen, Guangnan (2008) Development of climate-based computer model to reduce crop harvest losses in Australia. In: AgEng2008: Agricultural and Biosystems Engineering for a Sustainable World, 23-25 Jun 2008, Crete, Greece.

Cubero, Samuel N. and Portlock, Joshua (2008) Dynamics and control of a VTOL quad-thrust aerial robot. In: Billingsley, John and Bradbeer, Robin, (eds.) Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany, pp. 27-40. ISBN 978-3-540-74026-1

Golshani, Aliakbar and Tran-Cong, Thanh (2008) Energy analysis of hydraulic fracturing. In: 12th International Conference of IACMAG, 1-6 Oct 2008, Goa, India.

Thorpe, David and Ryan, Neal and Charles, Michael (2008) Environmental sustainability - a driver for innovation in construction SMEs? In: 3rd International Conference of the CRC for Construction Innovation: Clients Driving Innovation: Benefiting from Innovation, 12-14 March 2008, Gold Coast, Australia.

Hussain, Amjed and Raine, Steven R. and Henderson, Craig and Jensen, Troy (2008) Evaluation of a proximal vision data acquisition system for measuring spatial variability in lettuce growth. In: 14th Australian Agronomy Conference: Global Issues. Paddock Action, 21-25 Sept 2008, Adelaide, South Australia.

McDougall, Kevin and Liu, Xiaoye and Basnet, Badri Bahadur and Apan, Armando (2008) Evaluation of current DEM accuracy for Condamine Catchment. In: Li, Deren and Ge, Yong and Foody, Giles M., (eds.) Accuracy in geomatics. World Academic Union, Liverpool, England. ISBN 1-84626-171-6

Asamoto, S. and Mutsuyoshi, H. and Aravinthan, T. and Suzukawa, K. (2008) Experimental investigation of innovative hybrid composite girders with GFRP and CFRP. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Brodie, I. M. (2008) Hydrological analysis of single and dual storage systems for stormwater harvesting. Water Science and Technology, 58 (5). pp. 1039-1046. ISSN 0273-1223

Morgan, R. G. and McIntyre, T. J. and Buttsworth, D. R. and Jacobs, P. A. and Potter, D. F. and Brandis, A. M. and Gollan, R. J. and Jacobs, C. M. and Capra, B. R. and McGilvray, M. and Eichmann, T. N. (2008) Impulse facilities for the simulation of hypersonic radiating flows. In: 38th AIAA Fluid Dynamics Conference and Exhibit (AIAA 2008), 23-26 Jun 2008, Seattle, WA. United States.

Kist, Alexander A. (2008) Instant handoffs for wireless infrastructure meshed networks. In: ATNAC 2008: Australasian Telecommunication Networks and Applications Conference , 7-10 Dec 2008, Adelaide, Australia.

Kist, Alexander A. and Lloyd-Smith, Bill (2008) Internet pooling: routing for load distribution in access networks. In: ATNAC 2007: Next Generation Networks: Enabling Closer International Cooperation, 2-5 Dec 2007, Christchurch, New Zealand.

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2008) Investigation of embedded near infrared fibre Bragg grating (FBG) sensors (830 nm) in structural health monitoring of glass fibre composite structures. In: OFS-19: 19th International Conference on Optical Fibre Sensors , 14-18 April 2008, Perth, Australia.

Parsons, David (2008) Is there an alternative to exams? Examination stress in engineering courses. International Journal of Engineering Education, 24 (6). pp. 1111-1118. ISSN 0949-149X

Wang, Yafeng and Yang, Hao and Xiang, Wei (2008) Iterative decision-feedback equalizer with cyclic detection for DFT-S OFDM system. In: 1st International Conference on Signal Processing and Communication Systems (ICSPCS2007), 17-19 Dec 2007, Gold Coast, Queensland, Australia.

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2008) M2S2 modular deployable shelter system: concept and analysis technique. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Wang, H. and Shi, Z. M. and Yang, K. (2008) Magnesium and magnesium alloys as degradable metallic biomaterials. In: FMST 2008: 4th International Conference on Frontiers in Materials Science and Technology, 26-28 Mar 2008, Brisbane, Australia.

Goh, Steven and Coaker, Warren and Bullen, Frank (2008) Management education for the 21st century engineering manager: an Australian perspective. In: FIE 2008: Racing Toward Innovation in Engineering Education , 22-25 Oct 2008, Saratoga Springs, NY, USA.

Gillies, Malcolm H. (2008) Managing the effect of infiltration variability on the performance of surface irrigation. [Thesis (_PhD/Research)] (Unpublished)

Gillies, Malcolm H. and Smith, R. J. and Raine, Steven R. (2008) Measurement and management of furrow irrigation at the field scale. In: Irrigation Australia 2008 - Share the Water, Share the Benefits: Irrigation Australia National Conference and Exhibition, 20-22 May 2008, Melbourne, Australia. (Unpublished)

Billingsley, John and Bradbeer, Robin, eds. (2008) Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany. ISBN 978-3-540-74026-1

Thorpe, David and Karan, Ebrahim Parvaresh (2008) Method for calculating schedule delay considering weather conditions. In: 24th Annual Conference of the Association of Researchers in Construction Management (ARCOM), 1-3 Sept 2008, Cardiff, Wales.

Rattray, Danny James (2008) Modelling herbicide movement from farm to catchment using the swat model. [Thesis (_PhD/Research)] (Unpublished)

Billingsley, John (2008) More machine vision applications in the NCEA. In: Billingsley, John and Bradbeer, Robin, (eds.) Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany, pp. 333-343. ISBN 978-3-540-74026-1; 978-3-540-74027-8

Liang, Q. Q. and Hadi, M. N. S. (2008) Nonlinear analysis and behavior of concrete-filled steel tubular beam-columns. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Kist, Alexander A. (2008) Note on remote laboratory access: a networking perspective. In: ICSPCS 2007: 1st International Conference on Signal Processing and Communication Systems (ICSPCS '2007), 17-19 Dec 2007, Gold Coast, Australia.

Shiau, Jim S. and Watson, Joshua Francis and Arnold, Matthew David (2008) Numerical study of a shallow foundation located near 45 degree slopes. In: ASEM 2008: 4th International Conference on Advances in Structural Engineering and Mechanics , 26-28 May 2008, Jeju, Korea.

Chee, Su Be and Al Shalabi, Ammar and Yousif, B. F. (2008) On the effect of counterface materials on tribo-behavior of steel wire sliding under dry contact condition. Surface Review and Letters, 15 (4). pp. 355-360. ISSN 0218-625X

Mai-Duy, Nam and Tran-Cong, Thanh (2008) On the use of integrated RBFs in Galerkin approximation for elliptic problems. In: BEM/MRM 30: 30th International Conference on Boundary Elements and Other Mesh Reduction Methods, 7-9 Jul 2008, Maribor, Slovenia.

McCarthy, Cheryl and Hancock, Nigel and Raine, Steven R. (2008) On-the-go machine vision sensing of cotton plant geometric parameters: first results. In: Billingsley, John and Bradbeer, Robin, (eds.) Mechatronics and machine vision in practice. Springer-Verlag, Berlin, Germany, pp. 299-306. ISBN 978-3-540-74026-1; eISBN: 978-3-540-74027-8

Lauder, Paul (2008) Performance evaluation of low-density parity-check codes. [USQ Project] (Unpublished)

Liang, Q. Q. and Ng, A. W. M. (2008) Performance-based optimization of strut-and-tie models in reinforced concrete deep beams. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Seilsepour, Mohsen and Rashidi, Majid and Ghareei Khabbaz, Borzoo (2008) Prediction of soil available phosphorus based on soil organic carbon. American-Eurasian Journal of Agricultural and Environental Science, 4 (2). pp. 189-193. ISSN 1818-6769

Baillie, Craig Peter and Chen, Guangnan (2008) Reducing energy input costs and associated greenhouse gas emissions in cotton. In: 14th Australian Cotton Conference: New Beginnings – Cotton in a Climate of Change , 12-14 Aug 2008, Gold Coast, Australia.

Billingsley, John and Visala, Arto and Dunn, Mark (2008) Robotics in agriculture and forestry. In: Siciliano, Bruno and Khatib, Oussama, (eds.) Springer handbook of robotics. Springer-Verlag, Berlin, Germany, pp. 1065-1077. ISBN 978-3-540-23957-4

Li, Q. and Wang, Hao (2008) Solidification microstructure modelling using cellular automaton method. Advanced Materials Research, 32 . pp. 271-274. ISSN 1022-6680

Mai-Duy, Nam and Tran-Cong, Thanh (2008) Solving 2D biharmonic equations by the Galerkin approach using integrated radial basis function networks. In: 8th International Conference on Computational and Mathematical Methods in Science and Engineering (CMMSE-2008), 13-16 June 2008, Murcia, Spain.

Brodie, Lyn and Zhou, Hong and Gibbons, Anthony (2008) Steps in developing an advanced software engineering course using problem based learning. Engineering Education, 3 (1). pp. 2-12. ISSN 1750-0044

Suntharavadivel, T. G. and Aravinthan, T. (2008) Strengthening of shear damaged RC beams with external clamping. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Gibbings, Peter and Brodie, Lyn (2008) Team-based learning communities in virtual space. International Journal of Engineering Education, 24 (6 ). pp. 1119-1129. ISSN 0949-149X

Faulconbridge, Robert Ian (2008) The development of learning and teaching strategies and technical texts for diverse groups of adult learners. [Thesis (_PhD/Research)] (Unpublished)

McCarthy, Alison and Hancock, Nigel and Raine, Steven R. (2008) Towards evaluation of adaptive control systems for improved site-specific irrigation of cotton. In: Irrigation Australia 2008: Irrigation Association of Australia National Conference and Exhibition: Share the Water, Share the Benefits, 20-22 May 2008, Melbourne, Australia. (Unpublished)

Brodie, Ian and Rosewell, Colin J. (2008) Using soil loss models to estimate suspended solids concentrations in stormwater runoff from pre-urban areas. Australian Journal of Water Resources, 12 (1). pp. 49-60. ISSN 1324-1583

Cronin, G. M. and Borg, S. S. and Dunn, M. T. (2008) Using video image analysis to count hens in cages and reduce egg breakage on collection belts. Australian Journal of Experimental Agriculture, 48 (7). pp. 768-772. ISSN 0816-1089

Billingsley, John (2008) Viewpoint: Localisation. Sensor Review, 28 (2). ISSN 0260-2288

Gyasi-Agyei, Amoakoh and Zhou, Hong (2008) Wireless networks: cross-layer Mac design. In: Furht, Borko, (ed.) Encyclopedia of wireless and mobile communications. Taylor & Francis, United States, pp. 1424-1433. ISBN 978-1-4200-4326-6

Tran, Canh-Dung and van der Heijden, G. H. M. and Phillips, David G. (2008) Application of topological conservation to model key features of zero-torque multi-ply yarns. Journal of the Textile Institute, 99 (4). pp. 325-337. ISSN 0040-5000

2007

Amir, Al-Falahi and Yusaf, T. and Yusoff, M. Z. (2007) Experimental and CFD study of the effects of design parameters on Reynolds number in a short duration hypersonic test facility. In: EPMESC X: Enhancement and Promotion of Computational Methods in Engineering and Science X, 21-23 Aug 2006, Sanya, China.

Zhang, Z. and Peterson, J. and Zhu, X. and Wright, W. (2007) Modelling land use and land cover change in the Strzelecki Ranges. In: MODSIM07: International Congress on Modelling and Simulation: Land, Water and Environmental Management: Integrated Systems for Sustainability, 10-13 Dec 2007, Christchurch, New Zealand.

Basnet, B. B. and Apan, A. A. (2007) Degree of site suitability measurement in a GIS: the effect of standardisation method. In: MODSIM07: International Congress on Modelling and Simulation: Land, Water and Environmental Management: Integrated Systems for Sustainability, 10-13 Dec 2007, Christchurch, New Zealand.

Karunasena, Warna (Karu) and Martin, Nicole (2007) The effect of debonding on the flexural behaviour of reinforced concrete beams strengthened with fibre reinforced polymer. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

Liu, X. and Zhang, Z. and Peterson, J. and Chandra, S. (2007) The effect of LiDAR data density on DEM accuracy. In: MODSIM07: International Congress on Modelling and Simulation: Land, Water and Environmental Management: Integrated Systems for Sustainability, 10-13 Dec 2007, Christchurch, New Zealand.

Dunn, Mark T. and Billingsley, John (2007) The use of machine vision for assessment of fodder quality. In: M2VIP 2007: 14th Annual Conference on Mechatronics and Machine Vision in Practice, 3-5 Dec 2007, Xiamen, China.

Billingsley, John (2007) Bovine intelligence for training horses. In: M2VIP 2007: 14th Annual Conference on Mechatronics and Machine Vision in Practice, 3-5 Dec 2007, Xiamen, China.

Thorpe, David and Fulcher, Robert (2007) Experiences in implementing a postgraduate engineering management program. In: AaeE 2007: Connecting Teaching, Research and Industry through Engineering Education, 09-13 Dec 2007, Melbourne, Australia.

Young, Frank R. and Gibbings, Peter (2007) Learning flexibility: the environment and a case study. In: ASCILITE 2007: 24th Annual Conference of the Australasian Society for Computers in Learning in Tertiary Education: ICT: Providing Choices for Learners and Learning, 2-5 Dec 2007, Nanyang Technological University, Singapore.

Billingsley, John (2007) Vision applications in agriculture. In: M2VIP 2007: 14th Annual Conference on Mechatronics and Machine Vision in Practice, 3-5 Dec 2007, Xiamen, China.

Ku, H. and Chan, W. L. and Trada, M. and Baddeley, D. (2007) An evaluation of fracture toughness of vinyl ester composites cured under microwave conditions. Journal of Materials Engineering and Performance, 16 (6). pp. 741-745. ISSN 1059-9495

Cardona, F. and Ku, H. and Pattarachaiyakoop, N. and Rogers, D. and Trada, M. (2007) Fracture toughness of phenol formaldehyde composites post-cured in microwaves. Journal of Electromagnetic Waves and Applications, 21 (14). pp. 2137-2146. ISSN 0920-5071

Goh, Steven (2007) 2020 VISION and its implication for engineering management education. In: AaeE 2007: 18th Annual Conference of the Australasian Association for Engineering Education, 9-13 Dec 2007, Melbourne, Australia.

Malpress, Ray and Buttsworth, David R. (2007) A new internal combustion engine configuration: opposed pistons with crank offset. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Liang, Qing Quan (2007) Automated performance-based optimal design of continuum structures under multiple load cases. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

Sanathkumara, Kumarapelige N. and Cubero, Samuel N. (2007) Automated soil hardness testing machine. In: M2VIP 2007: 14th Annual Conference on Mechatronics and Machine Vision In Practice, 3-5 Dec 2007, Xiamen, China.

H'ng, Po Lyn (2007) Comparative study of engineering leadership of senior engineers in Malaysia & Australia within the construction industry. [USQ Project] (Unpublished)

Bowtell, Les and Ahfock, Tony (2007) Comparison between unipolar and bipolar single phase grid-connected inverters for PV applications. In: AUPEC 2007: 17th Australasian Universities Power Engineering Conference, 9-12 Dec 2007, Perth, Australia.

Sharifian, Ahmad and Buttsworth, David R. (2007) Computational simulation of the wind-force on metal meshes. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Liang, Qing Quan (2007) Effects of continuum design domains on optimal bracing systems for multistory steel building frameworks. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

Buttsworth, D. R. and Davison, C. and MacLeod, J. D. and Strapp, J. W. (2007) Evaporator design for an isokinetic total water content probe in a naturally aspirating configuration. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Majid, Zulkepli and Chong, Albert K. and Setan, Halim (2007) Important considerations for craniofacial mapping using laser scanners. Photogrammetric Record, 22 (120). pp. 290-308. ISSN 0031-868X

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2007) Innovative all composite multi-pultrusion truss systems: FE modelling and behavioural issues. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

Al-Falahi, Amir and Yusoff, M. Z. and Yusaf, T. (2007) Numerical and experimental study to evaluate the performance of Universiti Tenaga Nasional short duration hypersonic test facility. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Islam, Md Mainul and Kim, Ho Sung (2007) Properties and mechanical behaviour of novel sandwich composites made of syntactic foam and paper skin. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

Pandey, G. R. and Mutsuyoshi, H. and Aravinthan, T. (2007) Retrofitting reinforced concrete bridge frames using externally bonded FRP sheets. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

Mai-Duy, Nam and Tran-Cong, Thanh (2007) Solving partial differential equations with point collocation and one-dimensional integrated interpolation schemes. In: 14th International Conference on Computational & Experimental Engineering and Sciences, 1-3 Jan 2007, Miami, Florida, USA.

Liang, Qing Quan (2007) Structural design optimization. Advances in Structural Engineering, 10 (6). i-ii. ISSN 1369-4332

Omar, T. and Aravinthan, T. and Van Erp, G. (2007) The effect of core architecture on the behaviour of sandwich columns under edgewise compression loading. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

Khennane, Amar and Tran-Cong, Thanh (2007) Timoshenko beam-solution in terms of integrated radial basis functions. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

Lam-Dao, Nguyen and Apan, Armando and Young, Frank R. and Le-Van, Trung and Le-Toan, Thuy and Bouvet, Alexandre (2007) Rice monitoring using ENVISAT-ASAR data: preliminary results of a case study in the Mekong River Delta, Vietnam. In: 28th Asian Conference on Remote Sensing 2007, 12-16 Nov 2007.

Aravinthan, Thiru and Suntharavadivel, T. G. (2007) Effects of existing shear damage on externally post tensioned repair of bent caps. Journal of Structural Engineering, 133 (11). pp. 1662-1669. ISSN 0733-9445

Bolitho, Gary (2007) TDR probes for the measurement of root zone soil moisture. [USQ Project] (Unpublished)

Price, Daniel (2007) A comparative review of attributes of engineers in senior management roles. [USQ Project] (Unpublished)

Malpress, Ray (2007) A new internal combustion engine configuration - opposed piston with crank offset. [USQ Project] (Unpublished)

O'May, David Victor (2007) A study of pavement performance on the Gatton Bypass Duplication. [USQ Project] (Unpublished)

Sinderberry, Mark (2007) Accuracy assessment of 3D laser scanning data utilising different registration methods. [USQ Project] (Unpublished)

Maunder, David (2007) An investigation into the establishment of a continuously operating GPS reference station at Dubbo City Council, Central West NSW. [USQ Project] (Unpublished)

Wong Wan Sie, Winxie (2007) Analysis and design of curtain wall systems for high rise buildings. [USQ Project] (Unpublished)

de Leeuw, Gert Johannes Schreuder (2007) Analysis of hydraulic transients in pipeline networks. [USQ Project] (Unpublished)

Holzheimer, Carson Keith (2007) Automation of the rollingstock twist test. [USQ Project] (Unpublished)

Gallagher, Tony (2007) Clear zones in urban environments. [USQ Project] (Unpublished)

Weis, Paul Raymond (2007) Cost effectiveness of street lighting. [USQ Project] (Unpublished)

Walker, Bryan Patrick (2007) Cost-effective 3D modelling. [USQ Project] (Unpublished)

Kleynhans, Claudius Justus (2007) Design and review of Millmerran coal handling plant. [USQ Project] (Unpublished)

Yok Meng, Tan (2007) Design of a microclimate ventilation system. [USQ Project] (Unpublished)

Parkin, Damion Ian Harcourt (2007) Design of a rear suspension configuration for a live axle race car to achieve optimum handling characteristics. [USQ Project] (Unpublished)

Hicks, Kevin Charles (2007) Design of aeration ploughing tool for poultry litter within shed to reduce odour generation. [USQ Project] (Unpublished)

Stewart, Robert (2007) Design of electro-hydraulic controlled poppet valves. [USQ Project] (Unpublished)

Thiess, Jeremy (2007) Development of a test frame to investigate the propagation of pressure waves generated by a thunderbolt hammer. [USQ Project] (Unpublished)

Worrall, Andrew (2007) Development of quality assurance procedures for cadastral surveying using GPS technology. [USQ Project] (Unpublished)

Jones, Bruce Thomas (2007) Dragline maintenance engineering. [USQ Project] (Unpublished)

Mohr, Logan (2007) Effects and controls of lateral refraction in underground coal mines. [USQ Project] (Unpublished)

Kist, Alexander A. (2007) Erlang B as a performance model for IP flows. In: ICON 2007: 15th IEEE International Conference on Networks, 19-21 Nov 2007, Adelaide, Australia.

Schuh, Stephen Andrew (2007) Estimating rippability of Brisbane Tuff using quantitative and qualitative characteristics and a modified approach to an existing rippability rating method. [USQ Project] (Unpublished)

Boitshoko, Daniel (2007) Extracting spatial information from aerial video imagery for monitoring riparian areas. [USQ Project] (Unpublished)

Clarke, Lauren Elizabeth (2007) Factors in the selection of contractors for engineering works. [USQ Project] (Unpublished)

Coaker, Warren (2007) How engineers become CEOs - implications for education and training. [USQ Project] (Unpublished)

Temple, Christopher Jed (2007) Impediments to identifying freehold land rights in N.S.W. [USQ Project] (Unpublished)

Cardona, F. and Rogers, D. and Van Erp, G. (2007) Investigation by TGA-FTIR of the effect of styrene content and thickness on the UV-curing of vinylester resins. Journal of Thermoplastic Composite Materials, 20 (6). pp. 601-615. ISSN 0892-7057

Gustafson, Adrian Mark (2007) Investigation of a new generation degradable implant material. [USQ Project] (Unpublished)

Martin, Christopher (2007) Ipswich City Council water supply infrastructure capacity high water usage and water meter accuracy. [USQ Project] (Unpublished)

Muller, Ben (2007) Irrigation performance and water use efficiency of turf production. [USQ Project] (Unpublished)

Liyanawaduge, Nawanandana Chandrasiri (2007) GPS usage and infrastructure needs for machine guidance and control in the construction projects associated with QDMR. [USQ Project] (Unpublished)

Ong, Chin How (2007) Life cycle assessment of cement in Malaysia. [USQ Project] (Unpublished)

Wei, Lay Kian (2007) Life cycle assessment of CSR autoclaves lightweight concrete production in Malaysia. [USQ Project] (Unpublished)

Booshand, Peter John (2007) Literature review of advanced research and innovation in the mining industry. [USQ Project] (Unpublished)

Crowe, Daniel Leigh (2007) Management of physical assets at Purga Quarry. [USQ Project] (Unpublished)

El Komy, Ahmed (2007) Millmerran Power Station ROM coal blockage removal system. [USQ Project] (Unpublished)

Mathieu, Renaud and Aryal, Jagannath and Chong, Albert K. (2007) Object-based classification of Ikonos imagery for mapping large-scale vegetation communities in urban areas. Sensors, 7 (11). pp. 2860-2880. ISSN 1424-8220

Bichel, Daniel (2007) Optimisation of biodiesel stationary engine performance by modelling and simulating the running conditions. [USQ Project] (Unpublished)

Chamberlain, Michael (2007) Optimisation of Gold Coast City’s chlorine dosing system for the southern region distribution network. [USQ Project] (Unpublished)

Saunders, Joseph Ian (2007) Porous weirs for flood mitigation. [USQ Project] (Unpublished)

Lefhoko, Mmitsi (2007) Power station operations Millmerran power station feed water dissolved oxygen control. [USQ Project] (Unpublished)

Breddin, Ian Stewart (2007) Property rights and the littoral zone in Queensland. [USQ Project] (Unpublished)

Tan, Heng Tsin Stanley (2007) Recycling of used electronics in Singapore. [USQ Project] (Unpublished)

Sullivan, Steven Michael (2007) Research, design and develop a pipe latching/unlatching device that can be used to help automate the pipe tripping process. [USQ Project] (Unpublished)

MacMillan, Andrew Allan (2007) Respiration monitor and recording system. [USQ Project] (Unpublished)

Steyn, Marius (2007) Review and redesign of Pilbara Iron 24MTA conveyor system. [USQ Project] (Unpublished)

Lee, Wai Hung (2007) Shrinkage reduction of thermoset matrix particulate reinforced composites during hardening using low power microwave. [USQ Project] (Unpublished)

Muir, Paul John (2007) Siphons as furrow irrigation measurement devices. [USQ Project] (Unpublished)

Dunwoody, John Ernest (2007) Spatial analysis of woody vegetation land cover change in Crows Nest Shire, QLD. [USQ Project] (Unpublished)

Green, Christopher Ross (2007) Testing and analysis of fibre composite beams in a bridge structure. [USQ Project] (Unpublished)

Wang, H. and Estrin, Y. and Fu, H. M. and Song, G. L. and Zuberova, Z. (2007) The effect of pre-processing and grain structure on the bio-corrosion and fatigue resistance of magnesium alloy AZ31. Advanced Engineering Materials, 9 (11). pp. 967-972. ISSN 1438-1656

Mylne, George (2007) The effectiveness of a multiple-frequency global navigation satellite system (GNSS)on multipath mitigation. [USQ Project] (Unpublished)

Hansen, Luke (2007) The use of waste cooking oil as an alternative fuel for the diesel engine. [USQ Project] (Unpublished)

Dugdell, David Thomas (2007) Toowoomba road network review. [USQ Project] (Unpublished)

Kwok, Keen Whale (2007) Understanding progressive collapse and its effect to structural design. [USQ Project] (Unpublished)

Davidson, Thomas Peter George (2007) Using tensile tests as benchmark, investigate the best percentage by weight of slg, as fillers, in Phenolic resins post-cured by microwaves. [USQ Project] (Unpublished)

Kang, Boon Geh (2007) Wall climbing robot. [USQ Project] (Unpublished)

Najafi, Bahman and Pirouzpanah, Vahab and Najafi, Gholamhassan and Yusaf, Talal and Ghobadian, Barat (2007) Experimental investigation of performance and emission parameters of a small diesel engine using CNG and biodiesel. In: 13th Small Engine Technology Conference 2007, 30 Oct - 01 Nov 2007, Toki Messe, Niigata, Japan.

Smith, Catherine. and Shiau, Jim S. (2007) Bearing capacity of footings near slopes. In: 10th Australia New Zealand Conference on Geomechanics, 21-24 Oct 2007, Brisbane, Australia.

Thomas, Caroline and Shiau, Jim S. (2007) Modelling the arching effect in active earth pressure problems. In: 10th Australia New Zealand Conference on Geomechanics, 21-24 Oct 2007, Brisbane, Australia.

Shinozaki, Hiroo and Aravinthan, Thiru and Pandey, Govinda Raj and Mutsuyoshi, Hiroshi (2007) Advancements in retrofitting reinforced concrete structures in Japan using FRP sheets. In: 23rd Biennial Conference of the Concrete Institute of Australia: Concrete for Future, 18-20 Oct 2007, Adelaide, Australia.

Ku, Harry S. and Fulcher, Robert (2007) The process of updating engineering management science in an Australian regional university excellence in developing e-learning. European Journal of Engineering Education, 32 (5). pp. 527-538. ISSN 0304-3797

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2007) Analytical studies on externally post tensioned concrete girders with existing shear cracks. In: 23rd Biennial Conference of the Concrete Institute of Australia: Concrete for Future, 18-20 October 2007, Adelaide, Australia.

Harvey, Warren John (2007) Bridge approach guardrail prioritisation. [USQ Project] (Unpublished)

Weston, Bill Thomas (2007) Design and trial of an alternative option for suburban sewerage pump stations. [USQ Project] (Unpublished)

Birkbeck, A. (2007) Development of a remote laboratory system for external university students. [USQ Project] (Unpublished)

McKay, Michael (2007) Electrical training package for mining area C. [USQ Project] (Unpublished)

Sullivan, T. (2007) Embedded control system for biogas digesters. [USQ Project] (Unpublished)

Chow, Kai Wen (2007) Implications for engineers aspiring to become top-senior managers. [USQ Project] (Unpublished)

Looi Zi Qing, Sean (2007) Improving the performance of an industrial cold room. [USQ Project] (Unpublished)

Newman, Anthony (2007) Interactive map associated with tourism. [USQ Project] (Unpublished)

Ahmad, Abdul Hamid (2007) Life cycle assessment in semiconductor foundry. [USQ Project] (Unpublished)

McDougall, Kevin (2007) Measuring and modelling the performance of SDIs at the sub-national level - some research challenges. In: Rajabifard, Abbas, (ed.) Towards a spatially enabled society. Melbourne University, Center for SDIs and Land Administration, Melbourne, Australia, pp. 311-323. ISBN 978-0-7325-1620-8

Mitchell, Andrew (2007) On-line equipment condition monitoring based maintenance. [USQ Project] (Unpublished)

Bollaart, Clement (2007) OPC cycle time analyser. [USQ Project] (Unpublished)

Mackenzie, Matthew Robert (2007) PID controller optimisation using genetic algorithms. [USQ Project] (Unpublished)

Raine, S. R. and Meyer, W. S. and Rassam, D. W. and Hutson, J. L. and Cook, F. J. (2007) Soil-water and solute movement under precision irrigation: knowledge gaps for managing sustainable root zones. Irrigation Science, 26 (1). pp. 91-100. ISSN 0342-7188

O'Donnell, Clayton (2007) Total effect on the environment of electric/hybrid electric vehicle batteries. [USQ Project] (Unpublished)

Khatri, Kanya L. and Smith, R. J. (2007) Toward a simple real-time control system for efficient management of furrow irrigation. Irrigation and Drainage, 56 (4). pp. 463-475. ISSN 1531-0353

Johnston, George Finlay (2007) Wildlife vehicle collision GIS mapping & modelling. [USQ Project] (Unpublished)

Weatherley, Mark Geoffrey (2007) The effect of compaction on the design life of rehabilitated insitu cement powder stabilised pavements. [USQ Project] (Unpublished)

Chen, Guangnan (2007) Drying operations: agricultural and forestry products. In: Capehart, Barney L., (ed.) Encyclopedia of energy engineering and technology. Taylor & Francis Books, London, United Kingdom, pp. 332-337. ISBN 978-0-8493-3653-9

Billingsley, John (2007) Industry and academe - which one holds the cutting edge? In: 9th Electrical Manufacturing Lecture, 19 Sept 2007, Brisbane, Australia. (Unpublished)

Wei, Riyu and Sheng, Zhang and Karunasena, Warna and Sivakugan, Nagaratnam and Zhang, Hongwu (2007) Blast simulation in underground mines using the combined finite-discrete element method. In: 7th WSEAS International Conference on Simulation, Modelling and Optimization (SMO '07), 15-17 September 2007, Beijing, China.

Ross, David and Ku, Harry S. (2007) Managing the delivery of 'Manufacturing Processes' in an Australian regional university known for excellence in e-learning. Delhi Institute of Advanced Studies Technology Review, 4 (1). pp. 46-54. ISSN 0972-9658

Mai-Duy, Nam and Tran-Cong, Thanh (2007) A Cartesian-grid collocation method based on radial-basis-function networks for solving PDEs in irregular domains. Numerical Methods for Partial Differential Equations, 23 (5). pp. 1192-1210. ISSN 0749-159X

Chong, Albert K.-F. (2007) An inexpensive stereo-image capture tool for motion study. Photogrammetric Record, 22 (119). pp. 226-237. ISSN 0031-868X

Billingsley, John (2007) Climbing up the wall. In: 10th International Conference on Climbing and Walking Robots and the Supporting Technologies for Mobile Machines: CLAWAR 2007, 16-18 July 2007, Singapore.

Ning, Zhiliang and Cao, P. and Wang, Hao and Sun, Jianfei and Liu, Diankun (2007) Effect of cooling conditions on grain size of AZ91 alloy. Journal of Materials Science and Technology, 23 (5). pp. 645-649. ISSN 1005-0302

de Barros, Alexandre G. and Somasundaraswaran, Kathirgamalingam and Wirasinghe, S. C. (2007) Evaluation of level of service for transfer passengers at airports. Journal of Air Transport Management, 13 (5). pp. 293-298. ISSN 0969-6997

Young, Frank R. (2007) Flexible professional development study option. Azimuth, 45 (8). pp. 34-36. ISSN 1387-6783

McLatchey, Graham and Billingsley, John (2007) Improving power to weight ratio of pneumatically powered legged robots. In: 10th International Conference on Climbing and Walking Robots and the Supporting Technologies for Mobile Machines: CLAWAR 2007, 16-18 July 2007, Singapore.

Wang, Hao (2007) In-situ Si/Al composite produced by semisolid metal processing. Materials and Manufacturing Processes, 22 (5-6). pp. 696-699. ISSN 1042-6914

Smith, R. J. and Raine, Steven R. and McCarthy, Alison and Hancock, Nigel (2007) Managing spatial and temporal variability in irrigated agriculture through adaptive control. In: SEAg 2007: Agriculture and Engineering - Challenge Today, Technology Tomorrow, 23-26 Sept 2007, Adelaide, Australia.

Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2007) Tungsten fibre reinforced Zr-based bulk metallic glass composites. Materials and Manufacturing Processes, 22 (5-6). pp. 687-691. ISSN 1042-6914

Doherty, William and Halley, Peter J. and Edye, Les and Rogers, David and Cardona, Francisco and Park, Yosup and Woo, Tim (2007) Studies on polymers and composites from lignin and fiber derived from sugar cane. Polymers for Advanced Technologies, 18 (8). pp. 673-678. ISSN 1042-7147

Ning, Zhiliang and Wu, Peilian and Wang, Hao and Cao, Fuyang and Sun, Jianfei (2007) Effect of pouring temperature on thixotropic microstructure formation of AZ91. Rare Metals, 26 (S1). pp. 180-184. ISSN 1001-0521

Ku, Harry S. and Ang, Soh Fong and Snook, Chris and Baddeley, Douglas (2007) Micrographs of fractured vinyl ester composites. Journal of Reinforced Plastics and Composites, 26 (11). pp. 1111-1134. ISSN 0731-6844

Le, Phong and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2007) A meshless IRBFN-based numerical simulation of dynamic strain localization in quasi-brittle materials. In: USNCCM9: 9th US National Congress on Computational Mechanics , 22-26 Jul 2007, San Francisco, CA, United States.

Reynolds, Wade and Young, Frank R. and Gibbings, Peter (2007) A comparison of methods for mapping golf greens. Spatial Science Queensland, 2007 (4). pp. 33-36. ISSN 1032-3848

Fontana, Denise C. and Potgieter, Andries B. and Apan, Armando (2007) Assessing the relationship between shire winter crop yield and seasonal variability of the MODIS NDVI and EVI images. Applied GIS, 3 (7). pp. 1-16.

Misra, R. K. and Hood, Sarah (2007) Desktop review of Polyacrylamide use in the Australian cotton industry. Technical Report. University of Southern Queensland, National Centre for Engineering in Agriculture , Toowoomba, Australia.

McKie, Scott (2007) Development of a portable high-wall lighting system. [USQ Project] (Unpublished)

Langat, Philip K. and Raine, Steven R. and Smith, R. J. (2007) Errors in predicting furrow irrigation performance using single measures of infiltration. Irrigation Science, 25 (4). pp. 339-349. ISSN 0342-7188

Pinnaduwage, L. A. and Zhao, W. and Gehl, A. C. and Allman, S. L. and Shepp, A. and Mahmud, K. K. and Leis, J. W. (2007) Quantitative analysis of ternary vapor mixtures using a microcantilever-based electronic nose. Applied Physics Letters, 91 (4). pp. 1-3. ISSN 0003-6951

Ren, Yibin and Wang, Hao and Huang, Jingjing and Zhang, Bingchun and Yang, Ke (2007) Study of biodegradation of pure magnesium. In: ASBM7: 7th Asian Symposium on Biomedical Materials , 20-23 Aug 2006, Jeju, Korea.

Brodie, Ian and Rosewell, Colin (2007) Theoretical relationships between rainfall intensity and kinetic energy variants associated with stormwater particle washoff. Journal of Hydrology, 340 (1-2). pp. 40-47. ISSN 0022-1694

Sharifian, Ahmad and Buttsworth, David R. (2007) Minimum safe standoff distance for protection from bushfire radiation by commercial metal meshes. In: 8th Australasian Heat and Mass Transfer Conference, 26-29 Jul 2005, Curtin University of Technology, Perth, Western Australia.

Sharifian, Ahmad and Watson, Stuart and Buttsworth, David R. and Barton, James (2007) Modelling the static thermal sensitivity of diaphragm-based fibre optic pressure sensors. In: 8th Australasian Heat and Mass Transfer Conference, 26-29 July 2005, Curtin University of Technology, Perth, Western Australia.

Li, Yingchun and Wang, Zicong and Wen, Peng and Meng, Max Q.-H. (2007) Accurately monitoring the depth of anaesthesia using an intelligent method. In: 2007 IEEE/ICM International Conference on Complex Medical Engineering (CME 2007), 23-27 May 2007, Beijing, China.

Wang, Zicong and Li, Yingchun and Wen, Peng and Meng, Max Q.-H. (2007) An index of depth of anaesthesia based on wavelet analysis of middle latency auditory evoked potentials. In: 2007 IEEE/ICM International Conference on Complex Medical Engineering (CME 2007), 23-27 May 2007, Beijing, China.

Butcher, Peter and Thorpe, David (2007) A review of triple helix linkages in New Zealand earthquake engineering networks and comparison with the Australian cooperative research centre model. In: Triple Helix VI: 6th Biennial International Conference on University, Industry and Government Linkages, 16-18 May 2007, Singapore.

Simmons, Shane (2007) Articulating your pathway through university towards professional registration as a land surveyor. Azimuth, 45 (4). pp. 32-35. ISSN 1387-6783

Young, Frank R. (2007) Articulation pathways to surveying and spatial information qualifications. Azimuth, 45 (3). pp. 22-25.

McDougall, Kevin and Rajabifard, Abbas and Williamson, Ian (2007) Building the spatial data infrastructure through data sharing - measuring progress within Australian local and state government jurisdictions. In: 2007 Spatial Sciences Institute Biennial International Conference (SSC2007), 14-18 May 2007, Hobart, Australia.

Hesse, Deike and Dunn, Mark and Billingsley, John and Withers, Kerry and Klingenspor, Martin and Rozman, Jan (2007) Strain specific differences in parameters of energy balance are related to the onset of diet-induced obesity in young male mice. In: 15th European Congress on Obesity, 22-25 Apr 2007, Budapest, Hungary.

Parsons, David (2007) The environmental impact of disposable versus re-chargeable batteries for consumer use. International Journal of Life Cycle Assessment, 12 (3). pp. 197-203. ISSN 0948-3349

Shi, Chenggen and Zhou, Hong and Lu, Jie and Zhang, Guangquan and Zhang, Zhongwei (2007) The Kth-best approach for linear bilevel multifollower programming with partial shared variables among followers. Applied Mathematics and Computation, 188 (2). pp. 1686-1698. ISSN 0096-3003

Charles, Michael and Furneaux, Craig and Pillay, Janet and Thorpe, David and Parades Castello, Cynthya and Brown, Kerry (2007) Uptake of an OHS Code of Practice by Australian construction firms. In: CIB World Building Congress 2007: Construction for Development, 14-17 May 2007, Cape Town, South Africa.

Faigl, Pavel and Rogers, David and Maurin, Romain and Van Erp, Gerard (2007) Plant based resins for fibre composites. In: Composites Australia & the Composites CRC Annual Conference 2007, 19 - 20 April 2007, Gold Coast, Australia.

Parsons, David (2007) Printed circuit board recycling in Australia. In: Achieving Business Benefits from Managing Life Cycle Impacts, 22-24 Nov 2006, Melbourne, Australia.

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2007) Innovative all composite multi-pultrusion truss system for stressed arch deployable shelters. In: AICSGE 6: 6th Alexandria International Conference on Structural and Geotechnical Engineering, 15-17 Apr 2007, Alexandria, Egypt.

Potgieter, Andries B. and Apan, Armando and Dunn, Peter K. and Hammer, Graeme L. (2007) Estimating crop area using seasonal time series of Enhanced Vegetation Index from MODIS satellite imagery. Crop and Pasture Science, 58 (4). pp. 316-325. ISSN 0004-9409

Omar, T. and Van Erp, G. and Key, P. (2007) Modular deployable composite shelters - truss system. In: ACIC 2007: Advanced Composites in Construction Conference , 2-4 Apr 2007, Bath, UK.

Mai-Duy, Nam and Tanner, Roger I. (2007) A spectral collocation method based on integrated Chebyshev polynomials for two-dimensional biharmonic boundary-value problems. Journal of Computational and Applied Mathematics, 201 (1). pp. 30-47. ISSN 0377-0427

Dohnal, Ludek and Faigl, Paul (2007) Evaluation of the linearity of calibration dependence. In: Quality assurance of analytical results, 26-28 Mar 2007, (Beskydy), Czech Republic. (Unpublished)

Wang, Zicong and Li, Yingchun and Wen, Peng and Meng, Max Q.-H. (2007) Monitoring depth of anaesthesia using auditory evoked potential and bispectrum. In: 2007 IEEE International Conference on Integration Technology, 20-24 March 2007, Shenzhen, China.

Teng, Lanzhi and Wen, Peng (2007) Networked PID control system modeling and simulation using Markov chain. In: 2007 IEEE International Conference on Integration Technology, 20-24 March 2007, Shenzhen, China.

Mai-Duy, Nam and Mai-Cao, Lan and Tran-Cong, Thanh (2007) Computation of transient viscous flows using indirect radial basis function networks. CMES: Computer Modeling in Engineering and Sciences, 18 (1). pp. 59-78. ISSN 1526-1492

Liang, Qing Quan and Uy, Brian and Liew, J. Y. Richard (2007) Local buckling of steel plates in concrete-filled thin-walled steel tubular beam-columns. Journal of Constructional Steel Research, 63 (3). pp. 396-405. ISSN 0143-974X

Ku, H. and Trada, M. and Puttgunta, V. C. (2007) Mechanical properties of vinyl ester composites cured by microwave irradiation: pilot study. Key Engineering Materials, 334-335 . pp. 537-540. ISSN 1013-9826

Thorpe, David and Ryan, Neal (2007) Responding to global issues: sustainability and innovation in the Australian SME residential building construction sector. In: ICCPM/ICCEM 2007, 1-2 March 2007, Singapore.

Yousif, B. F. and El-Tayeb, N. S. M. (2007) Tribological evaluations of polyester composites considering three orientations of CSM glass fibres using BOR machine. Applied Composite Materials, 14 (2). pp. 105-116. ISSN 1573-4897

Yusaf, Talal and Buttsworth, David R. (2007) Characterisation of mixing rate due to high power ultrasound. Ultrasonics Sonochemistry, 14 (2). pp. 266-274. ISSN 1350-4177

Liang, Qing Quan and Uy, Brian and Bradford, Mark A. and Ronagh, Hamid R. (2007) Closure to 'Strength analysis of steel-concrete composite beams in combined bending and shear' by Qing Quan Liang, Brian Uy, Mark A. Bradford and Hamid R. Ronagh. Journal of Structural Engineering, 133 (2). pp. 309-310. ISSN 0733-9445

Sharifian, Ahmad and Buttsworth, David R. (2007) Evaluation of glued-diaphragm fibre optic pressure sensors in a shock tube. Shock Waves, 16 (3). pp. 189-197. ISSN 0938-1287

Bishop, Matthew Darrell (2007) Educational robot design. [USQ Project] (Unpublished)

Liu, Xiaoye and Zhang, Zhenyu and Peterson, Jim and Chandra, Shobhit (2007) LiDAR-derived high quality ground control information and DEM for image orthorectification. Geoinformatica: an international journal on advances of computer science for geographic information systems, 11 (1). pp. 37-53. ISSN 1384-6175

Gillies, Malcolm H. and Smith, R. J. and Raine, Steven R. (2007) Accounting for temporal inflow variation in the inverse solution for infiltration in surface irrigation. Irrigation Science, 25 (2). pp. 87-97. ISSN 0342-7188

Nicholls, Angela G. and Young, Frank R. (2007) Innovative hospital bed management using spatial technology. Spatial Science Queensland, 2007 (2). pp. 26-30. ISSN 1032-3848

Cardona, F. and Rogers, D. and Davey, S. and Van Erp, G. (2007) Investigation of the effect of styrene content on the ultimate curing of vinylester resins by TGA-FTIR. Journal of Composite Materials, 41 (2). pp. 137-152. ISSN 0021-9983

Ng, K. C. and Yusoff, M. Z. and Yusaf, T. F. (2007) Numerical simulation of 3D transonic flow in a compressor rotor. International Journal of Modelling and Simulation, 27 (1). pp. 74-79. ISSN 0288-6203

Mai-Duy, N. and Tanner, R. I. (2007) A collocation method based on one-dimensional RBF interpolation scheme for solving PDEs. International Journal of Numerical Methods for Heat and Fluid Flow, 17 (2). pp. 165-186. ISSN 0961-5539

Smith, Rod and Gillies, Malcolm H. and Newell, Geoffrey and Foley, Joseph P. (2007) A decision support model for travelling gun irrigation machines. In: CIGR 2006: Agricultural Engineering for a Better World, 3-7 Sep 2006, Bonn, Germany.

Cubero, Samuel and Tjoe, Donal (2007) A low cost vision-guided car for autonomous racing car competitions. In: M2VIP 2005: 12th Annual Conference on Mechatronics and Machine Vision in Practice, 29 Nov-1 Dec 2005, Manila, Philippines.

McDougall, Kevin and Rajabifard, Abbas and Williamson, Ian (2007) A mixed-method approach for evaluating spatial data sharing partnerships for spatial data infrastruture development. In: Onsrud, Harlan, (ed.) Research and theory in advancing spatial data infrastructure concepts. ESRI Press, Redlands, California, pp. 55-73. ISBN 978-1-58948-162-6

Le, Phong and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2007) A numerical study of strain localization in elasto-thermo-viscoplastic materials using radial basis function networks. Computers, Materials and Continua, 5 (2). pp. 129-150. ISSN 1546-2218

Ahfock, T. and Wells, C. G. (2007) A practical demonstration of electromagnetic braking. In: AUPEC 2007: 17th Australasian Universities Power Engineering Conference , 9-12 Dec 2007, Perth, Western Australia.

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2007) A practical thermodynamic method to calculate the best glass-forming composition for bulk metallic glasses. International Journal of Nonlinear Sciences and Numerical Simulation, 8 (2). pp. 171-178. ISSN 1565-1339

McCarthy, Cheryl and Hancock, Nigel and Raine, Steven R. (2007) A preliminary field evaluation of an automated vision-based plant geometry measurement system. In: 5th International Workshop on Functional Structural Plant Models (FSPM07), 4-9 Nov 2007, Napier, New Zealand.

Mai-Duy, Nam and Tran-Cong, Thanh (2007) A RBF-based fictitious-domain technique for Dirichlet boundary value problems in multiply-connected domains. In: 3rd Asian-Pacific Congress on Computational Mechanics (APCOM'07) and EPMESC XI, 3-6 Dec 2007, Kyoto, Japan.

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2007) A simple and accurate four-node quadrilateral element using stabilized nodal integration for laminated plates. CMC: Computers, Materials and Continua, 6 (3). pp. 159-176. ISSN 1546-2218

Inman-Bamber, N. G. and Attard, S. J. and Verrall, S. A. and Webb, W. A. and Baillie, C. (2007) A web-based system for scheduling irrigation in sugarcane. In: 2007 International Society of Sugar Cane Technologists Congress, July-August 2007, Durban, South Africa .

Nguyen-Ky, Tai and Leis, John W. and Xiang, Wei (2007) An improved error estimation algorithm for stereophonic acoustic echo cancellation systems. In: ICSPCS 2007: 1st International Conference on Signal Processing and Communication Systems, 17-19 Dec 2007, Gold Coast, Australia.

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2007) An investigation of the response of embedded near infrared fibre bragg grating (FBG) sensors (830nm) in glass fibre composites under fatigue loading. In: 14th International Conference on Composite Structures (ICCS 14), 19-21 Nov 2007, Melbourne, Australia.

Yousif, B. F. and Jye, W. K. and El-Tayeb, N. S. M. (2007) An investigation on tensile, compression and flexural properties of natural fibre reinforced polyester composites. In: ASME 2007 International Mechanical Engineering Congress and Exposition (IMECE2007), 11-15 Nov 2007, Seattle, Washington, USA.

Nguyen-Van, Hieu and Mai-Duy, Nam and Tran-Cong, Thanh (2007) Analysis of laminated composite plate/shell structures using a stabilized nodal-integrated quadrilateral element. In: 1st International Conference on Modern Design, Construction & Maintenance of Structures, 10-11 Dec 2007, Hanoi, Vietnam.

Ho-Minh, Dao and Mai-Duy, Nam and Tran-Cong, Thanh (2007) Analysis of viscoelastic flow by a radial basis function networks method. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Zhou, Hong and Jin, Lu and Zhang, Zhongwei and Ali, Hesham and Wang, Chulho (2007) Applications and performances of extended TTDDs in large-scale wireless sensor networks. In: 3rd International Conference of Mobile Ad-hoc and Sensor Networks, 12-14 Dec 2007, Beijing, China.

Dunn, Mark (2007) Applications of vision sensing in agriculture. [Thesis (_PhD/Research)] (Unpublished)

McCarthy, C. L. and Hancock, Nigel and Raine, Steven R. (2007) Automated machine vision sensing of plant structural parameters. In: Biological Sensorics 2007: Critical Technologies for Future Biosystems, 15-17 June 2007, Minneapolis, Minnesota.

Chong, Albert K.-F. (2007) Biology and zoology. In: Fryer, John and Mitchell, Harvey and Chandler, Jim H., (eds.) Applications of 3D measurement from images. Whittles Publishing, Dunbeath, Scotland, pp. 210-224. ISBN 1870325699; 9781870325691

Brodie, Ian and Young, Frank (2007) Case studies of applying urban surface data in evaluating stormwater management issues. Journal of Spatial Hydrology, 7 (2). pp. 1-16.

Najafi, Gholamhassan and Ghobadian, Barat and Yusaf, Talal and Rahimi, Hadi (2007) Combustion analysis of a CI engine performance using waste cooking biodiesel fuel with an artificial neural network aid. American Journal of Applied Sciences, 4 (10). pp. 756-764. ISSN 1546-9239

Brodie, Ian and Porter, Mark (2007) Comparison of methods to estimate suspended solids loads in urban stormwater. Australian Journal of Water Resources, 11 (2). pp. 221-230. ISSN 1324-1583

Mai-Duy, Nam and Khennane, Amar and Tran-Cong, Thanh (2007) Computation of laminated composite plates using integrated radial basis function networks. CMC: Computers, Materials and Continua, 5 (1). pp. 63-77. ISSN 1546-2218

Churches, Alex and Green, Cliff and Field, Bruce and Wightley, Allan and Green, Lance and van de Loo, Paul and Burvill, Colin and Smith, Warren and Snook, Chris (2007) Creating tomorrow's engineering designers. In: ConnectED 2007: International Conference on Design Education, 9-12 July, 2007, Sydney, Australia.

Ghude, Sarang (2007) Design a PID controller with missing packets in a networked servo-system. Coursework Masters thesis, University of Southern Queensland.

Bullen, Frank and Webb, Elizabeth and Brodie, Lyn (2007) Developing a national design competition through collaborative partnerships. In: ConnectED 2007: International Conference on Design Education, 9-12 July 2007, Sydney, Australia.

Brodie, Lyn and Gibbings, Peter (2007) Developing problem based learning communities in virtual space. In: ConnectED 2007: International Conference on Design Education, 9-12 July 2007, Sydney, Australia.

McClymont, David (2007) Development of a decision support system for furrow and border irrigation. [Thesis (_PhD/Research)] (Unpublished)

Wang, Hao and Fu, Huameng (2007) Development of bulk metallic glass composites. In: Fan, Cang, (ed.) The world of bulk metallic glasses and their composites. Research Signpost, Kerala, India, pp. 73-92. ISBN 978-81-308-0196-4

Mushtaq, Shahbaz and Dawe, David and Hafeez, Mohsin (2007) Economic evaluation of small multi-purpose ponds in the Zhanghe irrigation system, China. Agricultural Water Management, 91 (1-3). pp. 61-70. ISSN 0378-3774

Nawi, Nazmi Mat and Chen, Guangnan (2007) Economics of using on-farm aeration grain storage. In: SEAg 2007: Agriculture and Engineering - Challenge Today, Technology Tomorrow, 24-26 Sept 2007, Adelaide, Australia.

Yousif, B. F. and El-Tayeb, N. S. M. (2007) Effect of water as lubricant on friction and wear properties of CGRP composite evaluated by POD and BOR techniques. Surface Review and Letters, 14 (2). pp. 185-191. ISSN 0218-625X

Parsons, D. (2007) Encouraging learning through external engineering assessment. Australasian Journal of Engineering Education, 13 (2). pp. 21-30. ISSN 1324-5821

Parsons, David (2007) End-of-life cathode ray tubes: a life cycle assessment for Australia. The Environmental Engineer, 8 (4). pp. 7-13. ISSN 1447-9435

El-Tayeb, N. S. M. and Yousif, B. F. (2007) Evaluation of glass fiber reinforced polyester composite for multi-pass abrasive wear applications. Wear, 262 (9-10). pp. 1140-1151. ISSN 0043-1648

Craig, Ian and Schmidt, Erik and Hancock, Nigel (2007) EvapCalc software for the determination of dam evaporation and seepage. In: SEAg 2007: Agriculture and Engineering - Challenge Today, Technology Tomorrow, 24-26 Sept 2007, Adelaide, Australia.

Craig, Ian and Aravinthan, Vasantha and Baillie, Craig Peter and Beswick, Alan and Barnes, Geoff and Bradbury, Ron and Connell, Luke and Cooper, Paul and Fellows, Christopher and Fitzmaurice, Li and Foley, Joseph P. and Hancock, Nigel and Lamb, David and Morrison, Pippa and Mossad, Ruth and Misra, R. K. and Pittaway, Pam and Prime, Emma and Rees, Steve and Schmidt, Erik and Solomon, David and Symes, Troy and Turnbull, David (2007) Evaporation, seepage and water quality management in storage dams: a review of research methods. Environmental Health, 7 (3). pp. 84-97. ISSN 1444-5212

Chen, Guangnan and Sekhesa, Calvin C. and Penton, Geoff (2007) Facilitation of effective reduction of greenhouse gas emissions from agricultural sector. In: SEAg 2007: Agriculture and Engineering - Challenge Today, Technology Tomorrow, 24-26 Sep 2007, Adelaide, Australia.

Epaarachchi, Jayantha A. and Karunasena, Warna and Aravinthan, Thiru (2007) Investigation of dynamic behaviour of a hybrid composite bridge girder. In: 14th International Conference on Composite Structures (ICCS 14), 19 - 21 Nov 2007, Melbourne, Australia.

Brodie, Ian (2007) Investigation of stormwater particles generated from common urban surfaces. [Thesis (_PhD/Research)] (Unpublished)

Epaarachchi, Jayantha A. and Clegg, Richard E. and Canning, John (2007) Investigation of the use of near infrared FBG (830nm) sensors for monitoring the structural response of 0/90 woven cloth/CSM glass fibre/vynylester composite under static and fatigue loading. In: HUMS 2007: 5th DSTO International Conference on Health and Usage Monitoring , 19-22 Mar 2007, Melbourne, Australia.

Wang, Hao and Ning, Zhiliang (2007) Magnesium thixotropic structure produced by controlled nucleation method. Tezhong Zhuzao Ji Youse Hejin (Special Casting and Nonferrous Alloys) (Sp. Iss.). pp. 316-319. ISSN 1001-2249

Islam, Md Mainul and Kim, Ho Sung (2007) Manufacture of syntactic foams: pre-mold processing. Materials and Manufacturing Processes, 22 (1). pp. 28-36. ISSN 1042-6914

Fu, H. M. and Zhang, H. F. and Wang, Hao and Hu, Z. Q. (2007) Multifarious fracture features of CuZrAlGd(Ag) bulk metallic glasses. Advanced Materials Research, 29-30 . pp. 47-50. ISSN 1022-6680

Islam, Md Mainul and Kim, Ho Sung (2007) Novel syntactic foams made of ceramic hollow micro-spheres and starch: theory, structure and properties. Journal of Materials Science, 42 (15). pp. 6123-6132. ISSN 1573-4803

Yousif, B. F. and El-Tayeb, N. S. M. (2007) On the effect of woven glass fabric orientations on wear and friction properties of polyester composite. Surface Review and Letters, 14 (3). pp. 489-497. ISSN 0218-625X

White, Simon C. (2007) Partial rootzone drying and deficit irrigation in cotton for use under large mobile irrigation machines. [Thesis (_PhD/Research)] (Unpublished)

Tran, Canh-Dung and Phillips, David G. (2007) Predicting torque of worsted singles yarn using an efficient radial basis function network-based method. Journal of The Textile Institute, 98 (5). pp. 387-396. ISSN 0040-5000

Brodie, I. M. (2007) Prediction of stormwater particle loads from impervious urban surfaces based on a rainfall detachment index. Water Science and Technology, 55 (4). pp. 49-56. ISSN 0273-1223

Uy, Brian and Liang, Qing Quan (2007) Preface [to the 2005 Australian Structural Engineering Conference (ASEC) issue of Australian Journal of Structural Engineering]. Australian Journal of Structural Engineering, 7 (2). ISSN 1328-7982

Brodie, Lyn (2007) Problem based learning for distance education students of engineering and surveying. In: ConnectED 2007: International Conference on Design Education, 9-12 July 2007, Sydney, Australia.

Le-Cao, Khoa and Mai-Duy, Nam and Tran-Cong, Thanh (2007) Radial-basis-function calculations of buoyancy-driven flow in concentric and eccentric annuli. In: 16th Australasian Fluid Mechanics Conference (AFMC 2007), 3-7 Dec 2007, Gold Coast, Australia.

Brodie, Lyn (2007) Reflective writing by distance education students in an engineering problem based learning course. Australasian Journal of Engineering Education, 13 (2). pp. 31-40. ISSN 1324-5821

Thorpe, David (2007) Science and its applications in The Theory of Moral Sentiments. In: Cockfield, Geoff and Firth, Ann and Laurent, John, (eds.) New perspectives on Adam Smith's The Theory of moral sentiments. Edward Elgar Publishing Limited, Cheltenham, United Kingdom, pp. 124-140. ISBN 978 1 84542 480 0

Rana, Mohammad Azam and Setan, Halim and Majid, Zulkepli and Chong, Albert K. (2007) Simulation of interactive cutting tool for craniofacial osteotomy planning. In: CGIV 2007: 4th International Conference on Computer Graphics, Imaging and Visualisation, 13-16 Aug 2007, Bangkok, Thailand.

Sharma, Ronald (2007) Single-phase transformerless unipolar switched inverters for utility-connected photovoltaic applications. [Thesis (_PhD/Research)] (Unpublished)

Liang, Qing Quan and Uy, Brian and Liew, J. Y. Richard (2007) Strength of concrete-filled steel box columns with buckling effects. Australian Journal of Structural Engineering, 7 (2). pp. 145-155. ISSN 1328-7982

Islam, Md Mainul and Kim, Ho Sung (2007) Syntactic foams consolidated with starch: mixing behaviour for post-mould processing. Advanced Materials Research, 29-30 . pp. 169-172. ISSN 1022-6680

Islam, Md Mainul and Kim, Ho Sung (2007) Syntactic foams consolidated with starch: modelling for pre-mould processing. Advanced Materials Research, 29-30 . pp. 165-168. ISSN 1022-6680

Yousif, B. F. and El-Tayeb, N. S. M. (2007) The effect of oil palm fibers as reinforcement on tribological performance of polyester composite. Surface Review and Letters, 14 (6). pp. 1095-1102. ISSN 0218-625X

Petrov, Ryan (2007) The microclimate of Australian cattle feedlots. [Thesis (_PhD/Research)] (Unpublished)

Lu, Te-Wei and Wen, Peng (2007) Time optimal and robust control of twin rotor system. In: ICCA 2007: 6th IEEE International Conference on Control and Automation, 30 May-1 Jun 2007, Guangzhou, China.

Khatri, K. L. (2007) Toward real-time control of surface irrigation. [Thesis (_PhD/Research)] (Unpublished)

Brodie, Ian (2007) Using urban surface composition to model stormwater suspended solids: a case study of the effect of rainwater tanks. In: Mimicking Nature - Evolution or Revolution in Stormwater Management, 19-21 Sept 2007, Twin Waters, Australia.

Heron, Katherine Margaret Monica (2007) Vortex shedding on bridge piers. [USQ Project] (Unpublished)

Li, Jing and Lin, Chuxia and Wu, Yonggui and Lu, Wenzhou (2007) Water quality in Guangzhou Nansha Wetland Park and impacts by simulated acid rain. Journal of Agro-Environment Science, 26 (S2). pp. 390-393. ISSN 1672-2043

Ku, H. and Trada, M. and Puttgunta, V. C. and Kota, V. (2007) Yield and tensile strength of vinyl ester composites cured by microwaves. Journal of Electromagnetic Waves and Applications, 21 (4). pp. 517-526. ISSN 0920-5071

Jensen, T. and Apan, A. and Young, F. and Zeller, L. (2007) Detecting the attributes of a wheat crop using digital 3D imagery acquired from a low-altitude platform. Computers and Electronics in Agriculture, 59 (1-2). pp. 66-77. ISSN 0168-1699

Liang, Qing Quan (2007) Performance-based optimization: a review. Advances in Structural Engineering, 10 (6). pp. 739-753. ISSN 1369-4332

2006

Sohn, Jae Ho and Smith, R. J. and Yoong, Ernest (2006) Process studies of odour emissions from effluent ponds using machine-based odour measurement. Atmospheric Environment, 40 (7). pp. 1230-1241. ISSN 1352-2310

Omar, T. and Van Erp, G. and Key, P. W. (2006) Stressed arch modular deployable composite shelters: concept and development. In: CICE 2006: 3rd International Conference on FRP Composites in Civil Engineering, 13-15 Dec 2006, Miami, Fl, USA.

Mai-Cao, L. and Tran-Cong, T. (2006) A meshless level-set scheme for interfacial flows. In: 2006 International Conference on Nonlinear Analysis & Engineering Mechanics Today, 11-14 Dec 2006, Ho Chi Minh City, Vietnam.

Golshani, Aliakbar and Tran-Cong, Thanh (2006) Modelling a borehole subjected to fluid pressure. In: 2006 International Conference on Nonlinear Analysis & Engineering Mechanics Today, 11-14 Dec 2006, Ho Chi Minh City, Vietnam.

Fulcher, Robert and Snook, Chris (2006) Problem based learning in system design teams. In: AaeE 2006: 17th Annual Conference of the Australasian Association for Engineering Education, 10-13 Dec 2006, Auckland, New Zealand.

Xiang, Wei (2006) A power and bandwidth efficient remote wireless video surveillance system using joint source-channel coding. In: 13th Annual Conference on Mechatronics and Machine Vision in Practice, 5-7 Dec 2006, Toowoomba, Australia.

Billingsley, John (2006) More machine vision applications in the NCEA. In: 13th Annual Conference on Mechatronics and Machine Vision in Practice, 5-7 Dec 2006, Toowoomba, Australia.

McCarthy, Cheryl and Hancock, Nigel and Raine, Steven R. (2006) On-the-go machine vision sensing of cotton plant geometric parameters: first results. In: 13th Annual Conference on Mechatronics and Machine Vision in Practice, 5-7 Dec 2006, Toowoomba, Australia.

Gibbings, Peter and Brodie, Lyn (2006) An assessment strategy for a first year engineering problem solving course. In: AaeE 2006: 17th Annual Conference of the Australasian Association for Engineering Education, 10-13 Dec 2006, Auckland, New Zealand.

Gibbings, Peter (2006) Impact of online training in a first year undergraduate course. In: AaeE 2006: 17th Annual Conference of the Australasian Association for Engineering Education, 10-13 Dec 2006, Auckland, New Zealand.

Mai-Duy, N. and Tran-Cong, T. and Tanner, R. I. (2006) A new high-order time-kernel BIEM for the Burgers equation. CMES: Computer Modeling in Engineering and Sciences, 16 (3). pp. 177-186. ISSN 1526-1492

Majid, Zulkepli and Chong, Albert and Setan, Halim (2006) Calibrating Minolta VIVID 910 3D laser scanner for medical mapping. New Zealand Surveyor (296). pp. 3-6. ISSN 0048-0150

Ahfock, Tony L. and Bowtell, Leslie (2006) DC offset elimination in a single-phase grid-connected photovoltaic system. In: AUPEC 2006: 16th Australasian Universities Power Engineering Conference, 10-13 Dec 2006, Melbourne, Australia.

Grassick, Bruce (2006) Design and construction of a solar collector for teaching purposes. [USQ Project] (Unpublished)

Huang, J-F. and Apan, Armando (2006) Detection of sclerotinia rot disease on celery using hyperspectral data and partial least squares regression. Journal of Spatial Science, 51 (2). pp. 129-142. ISSN 1449-8596

Kist, Alexander A. (2006) Dynamic routing for multi-homed enterprise gateways. In: ATNAC 2006: Australian Telecommunications Networks and Applications Conference, 4-6 Dec 2006, Melbourne, Australia.

Apan, Armando and Phinn, Stuart (2006) Hyperspectral remote sensing (special feature). Journal of Spatial Science, 52 (2). pp. 47-48. ISSN 1449-8596

Cubero, Sam, ed. (2006) Industrial robotics: theory, modelling and control. Pro Literatur Verlag, Mammendorf, Germany. ISBN 3-86611-285-8

Sharp, Clayton Anthony (2006) Investigation of Toowoomba intersection crashes. [USQ Project] (Unpublished)

Buttsworth, David R. and Goozee, Richard J. and Jacobs, Peter A. (2006) Measurement and simulation of the interface in a low-enthalpy shock tunnel. In: 14th International Space Planes and Hypersonic Systems and Technologies Conference (AIAA/AHI 2006), 6-9 Nov 2006, Canberra, Australia.

Nguyen-Van, Hieu and Khennane, Amar and Tran-Cong, Thanh (2006) Monte-Carlo simulation of the durability of glass fibre reinforced composite under environmental stress corrosion. In: 2006 International Conference on Nonlinear Analysis & Engineering Mechanics Today, 11-14 Dec 2006, Ho Chi Minh City, Vietnam.

Ku, Harry S. (2006) Productivity improvement of composites processing through the use of industrial microwave technologies. Progress in Electromagnetics Research (PIER), PIER 66 . pp. 267-285. ISSN 1559-8985

Brandon, Paul (2006) Quality assurance. [USQ Project] (Unpublished)

Suryasaputra, Robert and Kist, Alexander A. and Harris, Richard J. (2006) Reconfiguration in multi class of services networks. In: ATNAC 2006: Australian Telecommunications Networks and Applications Conference, 4-6 Dec 2006, Melbourne, Australia.

Kamaruddin, Kamarul Faisal (2006) Security performance of a wireless LAN testbed. [USQ Project] (Unpublished)

Islam, Md Mainul and Kim, Ho Sung (2006) Syntactic foams consolidated with starch: mixing behaviour for post-mould processing. In: 4th International Conference on Advanced Materials & Processing (ICAMP-4), 10-13 Dec 2006, Hamilton, New Zealand.

Islam, Md Mainul and Kim, Ho Sung (2006) Syntactic foams consolidated with starch: modelling for pre-mould processing. In: 4th International Conference on Advanced Materials & Processing (ICAMP-4), 10-13 Dec 2006, Hamilton, New Zealand.

Parsons, David (2006) The environmental impact of electronics and its incorporation into the curriculum. In: AaeE 2006: 17th Annual Conference of the Australasian Association for Engineering Education, 10-13 Dec 2006, Auckland, New Zealand.

Langat, Philip K. and Raine, Steven R. (2006) Using simulation modelling to improve the design and management of furrow irrigation in small-holder plots. In: 10th Southern and Eastern Africa Rainwater Network Conference, 4-6th Dec 2006, Mombasa, Kenya.

Chan, Siew-Yuen (2006) Water leakage detection circuit in external chiller unit. [USQ Project] (Unpublished)

Billingsley, John (2006) Some machine vision applications in agriculture. In: 10th International Conference on Mechatronics Technology (ICMT 2006), 20-24 Nov 2006, Mexico City.

Suzuki, Hajime and Wilson, Carol D. and Ziri-Castro, Karla (2006) Time variation characteristics of wireless broadband channel in urban area. In: 1st European Conference on Antennas and Propagation, 6-10 Nov 2006, Nice, France.

Leong, Suet-Leong (2006) Managing product development process for time market. [USQ Project] (Unpublished)

Gall, Daniel (2006) Pitch control module microprocessor upgrade modification raytheon beechcraft bonanza A36. [USQ Project] (Unpublished)

Rolph, David Gordon (2006) A comparison of DGPS correction sources in South Eastern Queensland. [USQ Project] (Unpublished)

Reynolds, Jeremy (2006) Accuracy assessment of VRS in a dynamic environment. [USQ Project] (Unpublished)

Hughes, Neil (2006) Accuracy of volumes from MX(moss) design software. [USQ Project] (Unpublished)

Lister, Gregory (2006) Active vibration control. [USQ Project] (Unpublished)

Charles, Andrew (2006) Ambient air temperature aeration controller. [USQ Project] (Unpublished)

Hooper, James Andrew (2006) Analysis of catchment G in Oakey's sewer network. [USQ Project] (Unpublished)

Carter, Andrew William (2006) Application of geographical information system in underground coal mine to assist operational management. [USQ Project] (Unpublished)

Partridge, Toni Leigh (2006) Automation of a load-haul-dump (LHD) unit. [USQ Project] (Unpublished)

Mokonopi, Kealeboga (2006) Balancing a two wheeled robot. [USQ Project] (Unpublished)

Davey, Robert James (2006) Best percentage by weight of micro-spheres as fillers in phenolic resins, with fracture toughness as a benchmark. [USQ Project] (Unpublished)

Gurney, Richard Noel (2006) Best percentage weight of microspheres as fillers in resin using three-point bending test. [USQ Project] (Unpublished)

Armstead, Jared Kenneth (2006) Chassis development for the formula SAE racer. [USQ Project] (Unpublished)

Jacobs, Sunny (2006) Comparison of life cycle energy consumption of alternative irrigation systems. [USQ Project] (Unpublished)

Napper, Bryce (2006) Computational fluid dynamics (CFD) investigation of the thermal efficiency of micro climate conditioning of a typical workstation. [USQ Project] (Unpublished)

Millikan, Toby (2006) Current and future capacity of the Wirraglen Scout Reserve Wetlands to improve urban stormwater quality at Highfields. [USQ Project] (Unpublished)

Lawless, Daniel Patrick (2006) Defining non-tidal riparian boundaries. [USQ Project] (Unpublished)

Inderbitzin, Martin David (2006) Design review and analysis of Collinsville power station coal handling plant. [USQ Project] (Unpublished)

Whittred, Daniel (2006) Developing a monitoring and control system for irrigation pumping units. [USQ Project] (Unpublished)

Jiankulprasert, Manop (2006) Developing physical model for bearing capacity and flow net applications. [USQ Project] (Unpublished)

Hayllor, Nicholas (2006) Development of a low cost GPS guidance system for use in agriculture. [USQ Project] (Unpublished)

Otto, Colin W. (2006) Development of a mobile vehicle classification system. [USQ Project] (Unpublished)

Curtis, Benjamin Phillip (2006) Development of a noisy vehicle detection system. [USQ Project] (Unpublished)

Gunton, Michael J. (2006) Development of an asset management strategy for the city of Mandurah WA. [USQ Project] (Unpublished)

Cobb, Benjamin Jon (2006) Directional microphone array for security applications. [USQ Project] (Unpublished)

Govender, Gansen (2006) Driver fatigue issues on State Highway 1 south of Whangarei - within region 1 of New Zealand. [USQ Project] (Unpublished)

King, Joshua (2006) Dynamic tracking of a race car. [USQ Project] (Unpublished)

Mustafa, Muhammad Zaki Bin (2006) E-tutorials for electrical engineering courses using Dreamweaver. [USQ Project] (Unpublished)

Bartlett, Jeremy Adam (2006) Establishment of a priority infrastructure plan for the major road network in Laidley Shire. [USQ Project] (Unpublished)

Tinning, Eugene (2006) Field deployable shower unit by dual membrane filtration. [USQ Project] (Unpublished)

Klein, Lindsay Edward (2006) Finite element analysis of a composite bridge deck. [USQ Project] (Unpublished)

Eastaugh, Christopher S. (2006) Forest road decommissioning: modelling the effect on hydrological connectivity. [USQ Project] (Unpublished)

Chan, Wooi Lieh (2006) Fracture analysis of vinyl ester composites cured under microwave conditions. [USQ Project] (Unpublished)

Tierney, Daniel Robert (2006) Freight transport following an extreme rainfall event. [USQ Project] (Unpublished)

Woo, Mun Kit (2006) Frequency synthesizer requirements for future cellular radio systems (06-026). [USQ Project] (Unpublished)

Janusaitis, Stephen (2006) Impact response of flat and perforated plate. [USQ Project] (Unpublished)

Morgan, R. G. and McIntyre, T. J. and Jacobs, P. A. and Buttsworth, D. R. and Macrossan, M. N. and Gollan, R. J. and Capra, B. R. and Brandis, A. M. and Potter, D. and Eichmann, T. and Jacobs, C. M. and McGilvray, M. and Van Diem, D. and Scott, M. P. (2006) Impulse facility simulation of hypervelocity radiating flows. In: 2nd International Workshop on Radiation of High Temperature Gases in Atmospheric Entry, 6-8 Sep 2006, Rome, Italy.

Ler, Eng Loo (2006) Intelligent building automation system. [USQ Project] (Unpublished)

Geddes, Scott A. (2006) Internal model control (IMC) of a fruit drying system. [USQ Project] (Unpublished)

Gianoulis, Cosmas (2006) Investigate the use of thermal protection for underground cables in Ergon Engery's electricity network. [USQ Project] (Unpublished)

Seiler, Emile (2006) Investigating the economic viability and methods of harvesting and storing Leucaena. [USQ Project] (Unpublished)

Khan, Tawfiqul Hasan (2006) Iterative decoding for error resilient wireless data transmission. [USQ Project] (Unpublished)

Mohan, Deepu (2006) Life cycle assessment of a SAW filter. [USQ Project] (Unpublished)

Walker, Craig Louis (2006) Local and post-local buckling of steel tubes in thin-walled circular concrete-filed steel tubular columns. [USQ Project] (Unpublished)

Reynolds, Wade (2006) Mapping greens at City Golf Course. [USQ Project] (Unpublished)

Lee, Boon Chong (2006) Measuring moisture content of biofilter media using capacitance. [USQ Project] (Unpublished)

Free, Matthew (2006) Mobile manoeuvring robot. [USQ Project] (Unpublished)

Stark, Kevin (2006) Modular robot communication interface. [USQ Project] (Unpublished)

Cameron, Justin (2006) Next-generation 3D graphics engine design. [USQ Project] (Unpublished)

Fritsch, Mark Timothy (2006) Non-trible GPS receivers and virtual reference stations (VRS). [USQ Project] (Unpublished)

Rafiei, Ramin (2006) Optimisation of low-cost astronomical site testing techniques. [USQ Project] (Unpublished)

Rae, Andrew Stewart (2006) Performance and stability analysis of an AC variable speed drive. [USQ Project] (Unpublished)

Ang, Soon Lim (2006) Predicting the crushing stress of composite materials. [USQ Project] (Unpublished)

Allen, Glen Keith (2006) Problems of stone mastic asphalt use in north Queensland. [USQ Project] (Unpublished)

Lian, Chua Poh (2006) Production operation system - key performance indicator. [USQ Project] (Unpublished)

Beer, Craig (2006) Quality assurance system in a small surveying firm. [USQ Project] (Unpublished)

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru and Luther, Stephen (2006) Shear strengthening of cracked RC beam using external post-tensioning. In: 19th Australasian Conference on the Mechanics of Structures and Materials, 29 Nov - 1 Dec 2006, Christchurch, NZ.

Dunbar, Barry (2006) Software simulator development for orthogonal frequency division multiplexing (OFDM) modulation. [USQ Project] (Unpublished)

Watts, David Michael Graeme (2006) Speaker identification - prototype development and performance. [USQ Project] (Unpublished)

Morris, Anthony Brian (2006) Stormwater harvest and reuse for a wholesale nursery. [USQ Project] (Unpublished)

Bolger, Paul (2006) Strengthening of headstocks with vertical clamping to enhance shear capacity. [USQ Project] (Unpublished)

McCarthy, Alison (2006) Telemetry and communication systems for irrigation management. [USQ Project] (Unpublished)

Harch, Nelson (2006) Testing mapping grade GPS carrier phase accuracy. [USQ Project] (Unpublished)

Neubauer, Aaron John (2006) Testing of current flooring systems and materials. [USQ Project] (Unpublished)

Simmons, Shane (2006) The competency framework for surveyors compared to other professions in Queensland. Spatial Science Queensland, 2006 (5). pp. 42-45. ISSN 1032-3848

Kruger, Scott (2006) The design and optimisation of a prototype sailplane. [USQ Project] (Unpublished)

Breust, Tristan David (2006) The design and structural analysis of a steel portal framed shed for the Darling Downs Historical Rail Society. [USQ Project] (Unpublished)

Clarke, Daniel John (2006) The design of a three point linkage implement height control system. [USQ Project] (Unpublished)

Parsons, David (2006) The environmental impact of compact fluorescent lamps and incandescent lamps for Australian conditions. The Environmental Engineer, 7 (2). pp. 8-14. ISSN 1447-9435

Chan, Auc Fai (2006) The finite difference time domain method for computational electromagnetics. [USQ Project] (Unpublished)

Chiu, Kwong Man Karen (2006) The use of recycled concrete aggregate in structural concrete around South East Queensland. [USQ Project] (Unpublished)

Hossain, T. and Mendis, P. A. and Aravinthan, Thiru and Baker, Graham (2006) Torsional resistance of high-strength concrete beams. In: 19th Australasian Conference on the Mechanics of Structures and Materials, 29 Nov - 1 Dec 2006, Christchurch, NZ.

Johnston, Kristine Leigh (2006) Treatment of mine water with colloidal suspensions. [USQ Project] (Unpublished)

Kronk, Matthew Neil (2006) Ultimate strength of steel-concrete composite beams under combined bending and torsion. [USQ Project] (Unpublished)

Figg, Matthew Lorne (2006) Using renewable plantation timber as a replacement option for unrenewable hardwood girders in bridges. [USQ Project] (Unpublished)

Vella, Anthony (2006) Ventilation of highwall mining to control methane concentration at the Moura Mine. [USQ Project] (Unpublished)

Stoeckl, Wayne Edmund (2006) Viability of a coordinated cadastre in New South Wales. [USQ Project] (Unpublished)

Wallace, Darren James (2006) Water and wastewater strategic township plan Warragul, Victoria. [USQ Project] (Unpublished)

Downey, Kym Therese (2006) Weather induced changes on domestic water consumption. [USQ Project] (Unpublished)

Bavarin, Rudolph Edouard (2006) 50 kW eddy current brake. [USQ Project] (Unpublished)

Ng, S. K. and Carter, S. J. B. and Bullen, Frank (2006) A biomimicry approach to automating visual road surveys. In: 22nd ARRB Conference: Research Into Practice, 29 Oct - 02 Nov 2006, Canberra, Australia.

Mai-Duy, N. and Tran-Cong, T. and Tanner, R. I. (2006) A domain-type boundary-integral-equation method for two-dimensional biharmonic Dirichlet problem. Engineering Analysis with Boundary Elements, 30 (10). pp. 809-817. ISSN 0955-7997

He, Mingqian Belinda (2006) Analysis of the recycling method for aluminum soda cans. [USQ Project] (Unpublished)

Treverrow, Daniel (2006) Comparison of injury criteria for human head impacts. [USQ Project] (Unpublished)

Lau, Chi Hing (2006) Construction technology for high rise buildings in Hong Kong. [USQ Project] (Unpublished)

Luke, Ricky (2006) Cost effectiveness of suburban street lighting. [USQ Project] (Unpublished)

Shiau, Jim S. and Perumal, Tagarajan and Benjamin, Michael and Pather, Selvan and Ayers, Ron (2006) Developing a track model for testing the road pavement under repeated moving surface loads. In: 22nd ARRB Conference: Research Into Practice, 29 Oct - 02 Nov 2006, Canberra, Australia.

Shaw, Neil Geoffrey (2006) Evaluation of Ashtech ProMark2 survey system. [USQ Project] (Unpublished)

McGuinness, Sean J. (2006) Evaluation of commercial EMF software. [USQ Project] (Unpublished)

McCosker, Daniel Patrick (2006) Guidelines for the use of electronic survey field notes and CAD computation files as legal records. [USQ Project] (Unpublished)

Gray, Benjamin (2006) Issues with wireless 802.11 networks. [USQ Project] (Unpublished)

Tuxford, Andrew (2006) Numerical analysis of a closed face impeller. [USQ Project] (Unpublished)

Anderson, Troy and Ayers, Ron (2006) Prioritisation of guardrail remedial works. In: 22nd ARRB Conference: Research Into Practice, 29 Oct - 02 Nov 2006, Canberra, Australia.

Brodie, Lyn (2006) Problem based learning in the online environment - successfully using student diversity and e-education. In: 2006 Annual Conference on Internet Research 7.0: (IR 7.0): Internet Convergences, 27-30 Sept 2006, Brisbane, Qld, Australia.

Lee, Chin Fung (2006) Quality review of unit technical logistic and maintenance processes. [USQ Project] (Unpublished)

Khatri, Kanya L. and Smith, R. J. (2006) Real-time prediction of soil infiltration characteristics for the management of furrow irrigation. Irrigation Science, 25 (1). pp. 33-43. ISSN 0342-7188

Freeman, Barry (2006) Steering system and suspension design for a formula SAE-A racer. [USQ Project] (Unpublished)

Gribble, Brett (2006) Stress relieving furnace modelling and analysis. [USQ Project] (Unpublished)

Smith, Barton James (2006) System design for formula SAE-A racecar. [USQ Project] (Unpublished)

Holloway, Stephen John (2006) The effect of wide open bays on legal boundaries. [USQ Project] (Unpublished)

Pejakovic, Derek (2006) Theatre booking system. [USQ Project] (Unpublished)

Billingsley, John (2006) Viewpoint. Sensor Review, 26 (4). p. 261. ISSN 0260-2288

Craig, I. P. (2006) Comparison of precise water depth measurements on agricultural storages with open-water evaporation estimates. Agricultural Water Management, 85 (1-2). pp. 193-200. ISSN 0378-3774

Epaarachchi, Jayantha A. (2006) Assessment of damage accumulation in glass fibre reinforced plastic (GFRP) composites under spectrum fatigue loading. In: 2006 International Conference on Structural Integrity and Failure (SIF2006), 27-29 Sept 2006, Sydney, Australia.

Chong, Albert K.-F. (2006) Photogrammetry for digital hand surface capture in swimming performance study. In: ISPRS Commission V Symposium: Image Engineering and Vision Metrology, 25-27 Sept 2006, Dresden, Germany.

McDougall, Kevin and Williamson, Ian and Bellman, Chris and Rizos, Chris (2006) Challenges facing spatial information and geomatics education in the higher education sector. In: Combined 5th Trans Tasman Survey Conference and 2nd Queensland Spatial Industry Conference 2006: Land and Sea Spatially Connected - In a Tropical Hub, 19-23 September 2006, Cairns, Australia.

Epaarachchi, Jayantha A. (2006) A study of estimation of damage accumulation of glass fibre reinforce plastic (GFRP) composites under a block loading situation. Composite Structures, 75 (1-4). pp. 88-92. ISSN 0263-8223

Epaarachchi, Jayantha A. and Clegg, Richard (2006) An experimental investigation of the properties of cross-ply laminate used for manufacturing of small aircraft components. Composite Structures, 75 (1-4). pp. 93-99. ISSN 0263-8223

Shi, Chenggen and Lu, Jie and Zhang, Guangquan and Zhou, Hong (2006) An extended branch and bound algorithm for linear bilevel programming. Applied Mathematics and Computation, 180 (2). pp. 529-537. ISSN 0096-3003

Shiau, Jim S. and Lyamin, Andrei V. and Sloan, Scott W. (2006) Application of pseudo-static limit analysis in geotechnical earthquake design. In: Sixth European Conference on Numerical Methods in Geotechnical Engineering, 6-8 Sep 2006, Graz, Austria.

Sekhesa, Calvin Cally (2006) Development of a tool for estimating net emissions of greenhouse gases at farm and sub-catchment level. [USQ Project] (Unpublished)

Wen, Peng and Li, Yan (2006) EEG human head modelling based on heterogeneous tissue conductivity. Australasian Physical and Engineering Sciences in Medicine, 29 (3). pp. 235-240. ISSN 0158-9938

Eum, Suyong and Harris, Richard J. and Kist, Alexander (2006) Generalized Kruithof approach for traffic matrix estimation. In: 14th IEEE International Conference on Networks (ICON 2006), 13-15 Sep 2006, Singapore.

Campbell, Glenn (2006) Initial surveyor registration and endorsement in Queensland: how is it changing? In: Land and Sea Spatially Connected - In A Tropical Hub, 18-23 Sep 2006, Cairns, Australia.

Young, Frank R. and Nicholls, Angela G. (2006) Innovative hospital bed management using spatial technology. In: Combined 5th Trans Tasman Survey conference and 2nd Queensland Spatial Industry Conference, 20-23 September 2006, Cairns.

Parsons, David (2006) Is the internet good for our environment? Electroline .

Zhuge, Yan and Chuang, Shihwei (2006) Modelling of URM walls retrofitted with cable: a comparison between a basic mechanical model and distinct element method. Transactions of the Tianjin University, 12 (supp. 1 ). pp. 171-176. ISSN 1006-4982

Johnson, K. and Lemcke, Pamela M. and Karunasena, W. and Sivakugan, Nagaratnam (2006) Modelling the load-deformation response of deep foundations under oblique loading. Environmental Modelling and Software, 21 (9). pp. 1375-1380. ISSN 1364-8152

Hamid, H. A. and Yusaf, T. and Yusof, Z. M. (2006) An investigation on the improvement of the operation of Tenom Pangi HPP cooling power system. In: International Conference on Energy and Environment 2006 (ICEE 2006), 28-30 Aug 2006, Kajang, Malaysia.

Misra, R. K. and Sands, P. J. (2006) Modelling of soil fragmentation dynamics. In: ISTRO 17th Triennial Conference, 28 Aug - 3 Sept 2006, Kiel, Germany.

Parsons, David (2006) Analysing the environmental costs in electronics. Electroline .

Shiau, Jim S. and Pather, Selvan and Ayers, Ron (2006) Developing physical models for geotechnical teaching and research. In: 6th International Conference on Physical Modelling in Geotechnics, 4-6 Aug 2006, Hong Kong.

Epaarachchi, Jayantha A. (2006) Effects of static-fatigue (tension) on the tension-tension fatigue life of glass fibre reinforced plastic composites. Composite Structures, 74 (4). pp. 419-425. ISSN 0263-8223

Liang, Qing Quan (2006) Inelastic behavior of concrete-filled thin-walled steel tubular columns subjected to local buckling. In: 10th East Asia-Pacific Conference on Structural Engineering and Construction: Materials, Experimentation, Maintenance and Rehabilitation (EASEC-10) , 3-5 Aug 2006, Bangkok, Thailand.

Karunasena, Karu W. and Grice, Andrew (2006) Load-deformation behaviour prediction of timber beams externally reinforced with composite materials. In: 10th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-10), 3-5 August 2006, Bangkok, Thailand.

Mossad, Ruth (2006) Numerical simulation to optimize the design of double glazed doors for closed refrigerated vertical display cabinets. In: 13th International Heat Transfer Conference IHTC-13, 13-18 Aug 2006, Sydney, Australia.

Zhou, Hong and Gyasi-Agyei, Amoakoh and Zhang, Zhongwei (2006) Performance of STT-Vegas in heterogeneous wired and wireless networks. In: 3rd International Conference on Quality of Service in Heterogeneous Wired/Wireless Networks (QShine), 7-9 Aug 2006, Waterloo, Canada.

Liang, Qing Quan (2006) Performance-based optimization of strut-and-tie models in reinforced concrete beam-column connections. In: 10th East Asia-Pacific Conference on Structural Engineering and Construction: Materials, Experimentation, Maintenance and Rehabilitation (EASEC-10) , 3-5 Aug 2006, Bangkok, Thailand.

Liang, Qing Quan (2006) Post-local buckling of steel plates in concrete-filled thin-walled steel tubular columns under biaxial loading. In: 10th East Asia-Pacific Conference on Structural Engineering and Construction: Materials, Experimentation, Maintenance and Rehabilitation (EASEC-10), 3-5 Aug 2006, Bangkok, Thailand.

Muhamad, Hussein and Salamn, Y. and Yusaf, Talal (2006) Experimental investigation of free convection heat transfer with restriction placed at top of a vertical circular tube. In: 8th Biennial ASME Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Italy.

Muhamad, Hussein and Yusaf, Talal (2006) Heat transfer by mixed convection opposing laminar flow from the inside surface of uniformly heated inclined circular tube. In: 8th Biennial ASME Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Italy.

Ahfock, A. and Hewitt, A. J. (2006) DC magnetisation of transformers. IET Electric Power Applications, 153 (4). pp. 601-607. ISSN 1350-2352

Yousif, B. F. and El-Tayeb, N. S. M. and Yusaf, Talal (2006) The effects of load and velocity on friction and interface temperature of CGRP sliding against smooth stainless steel. In: 8th Biennial ASME Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Italy.

Wells, Colin G. and Ball, James A. R. (2006) Attenuation of a shielded rectangular dielectric rod waveguide. IEEE Transactions on Microwave Theory and Techniques, 54 (7). pp. 3013-3018. ISSN 0018-9480

Thorpe, David (2006) Developing strategic asset management leaders through postgraduate education. In: Inaugural World Congress on Engineering Asset Management, 11-14 July 2006, Gold Coast, Australia.

Aravinthan, Thiru and Worden, John (2006) Effective use of WebCT in a problem-based learning course for a dual mode delivery. In: Engineering Education 2006 (EE2006), 24-26 Jul 2006, Liverpool, United Kingdom.

Islam, Md Mainul and Kim, Ho Sung (2006) Novel syntactic foams made of ceramic hollow micro-spheres and starch - theory, structure and properties. In: 5th International Composites Conference (ACUN-5) , 11-14 July 2006, Sydney, Australia.

Brodie, Lyn and Porter, Mark (2006) Problem based learning for on-campus and distance education students in engineering and surveying. In: Engineering Education 2006 (EE2006), 24-26 July 2006, Liverpool, UK.

Apan, Armando and Sternes, Phil (2006) Quantifying changes in the spatial pattern and extent of flooded-inundated areas using imagery and landscape metrics. In: 2006 IASME/WSEAS International Conference on Energy, Environment, Ecosystems and Sustainable Development (EEESD'06), 11-13 July 2006, Athens, Greece.

Brodie, Lyn and Aravinthan, Thiru and Worden, John and Porter, Mark (2006) Re-skilling staff for PBL teaching in a team context. In: Engineering Education 2006 (EE2006), 24-26 July 2006, Liverpool, United Kingdom.

Goozee, R. J. and Jacobs, P. A. and Buttsworth, D. R. (2006) Simulation of a complete reflected shock tunnel showing a vortex mechanism for flow contamination. Shock Waves, 15 (3-4). pp. 165-176. ISSN 0938-1287

Gibbings, Peter and Brodie, Lyn (2006) Skills audit and competency assessment for engineering problem solving courses. In: Engineering Education 2006 (EE2006), 24-26 July 2006, Liverpool, UK.

Pather, Selvan and Aravinthan, Thiru (2006) The development of a simulation engineering game to teach problem solving skills and team dynamics. In: Engineering Education 2006 (EE2006), 24-26 July 2006, Liverpool, UK.

Perera, L. Kithsiri and Pathirana, Assela (2006) The role of MODIS data in visualizing flood disaster information for mass media. Asian Journal of Geoinformatics, 6 (3). ISSN 1513-6728

Hardeo, Pravendra and Karunasena, W. (Karu) (2006) Three dimensional finite element analysis of concrete filled FRP tubular model piles under lateral loads. In: International Composites Conference (ACUN-5), 11-14 July 2006, Sydney, Australia.

Hancock, Nigel and McKinnon, L. and Maxwell, Andrew Douglas (2006) Universal acidity - conductivity relations in commercial bulk starter production. Australian Journal of Dairy Technology, 61 (2). pp. 189-192. ISSN 0004-9433

Mai-Duy, Nam (2006) An effective spectral collocation method for the direct solution of high-order ODEs. Communications in Numerical Methods in Engineering, 22 (6). pp. 627-642. ISSN 1069-8299

Ku, Harry S. and Chia, Wee Chong (2006) Design of multi-purpose carbide end mill. Institution of Engineers, Malaysia. Journal, 67 (2). pp. 34-40. ISSN 0126-513X

Woods, Andrew (2006) Development and characterisation of an anechoic chamber. [USQ Project] (Unpublished)

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2006) Effect of existing cracks in concrete bridge members strengthened by external post-tensioning. In: FIB 2006: 2nd Congress (Federation Internationale du Beton), 5-8 Jun 2006, Naples, Italy.

Craig, Ian (2006) Evaporation mitigation technology (EMT) manufacturers liaison report. Technical Report. University of Southern Queensland, National Centre for Engineering in Agriculture , Toowoomba, Australia. (Unpublished)

Wigginton, David and Foley, Joseph (2006) Farming practices under centre pivots and lateral move machines. The Australian Cottongrower, 27 (3). pp. 47-48. ISSN 0159-1290

Fu, H. M. and Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2006) In situ TiB-reinforced cu-based bulk metallic glass composites. Scripta Materialia, 54 (11). pp. 1961-1966. ISSN 1359-6462

Aravinthan, Thiru (2006) Is external post-tensioning an effective solution for shear strengthening of bridge elements? In: Structural Faults + Repair 2006: Eleventh International Conference on ‘Extending the Life of Bridges Concrete + Composites Buildings, Masonry + Civil Structures', 13-15 June 2006, Edinburgh, UK.

Liang, Qing Quan and Uy, Brian and Liew, J. Y. Richard (2006) Nonlinear analysis of concrete-filled thin-walled steel box columns with local buckling effects. Journal of Constructional Steel Research, 62 (6). pp. 581-591. ISSN 0143-974X

Shiau, Jim and Smith, Catherine (2006) Numerical analysis of passive earth pressures with interfaces. In: III European Conference on Computational Mechanics (ECCM 2006), 5-8 June 2006, Lisbon, Portugal.

Shiau, Jim S. (2006) Numerical investigation of shakedown residual stresses under moving surface loads. In: III European Conference on Computational Mechanics (ECCM 2006), 5-8 June 2006, Lisbon, Portugal.

Merifield, R. S. and Nguyen, V. Q. (2006) Two- and three-dimensional bearing-capacity solutions for footings on two-layered clays. Geomechanics and Geoengineering: An International Journal, 1 (2). pp. 151-162. ISSN 1748-6025

Khatri, K. L. and Smith, R. J. and Raine, Steven R. (2006) Real time control of surface irrigation: managing infiltration variations and enhancing furrow irrigation performance. In: Irrigation Australia 2006: Irrigation Association of Australia National Conference and Exhibition, 9-11 May 2006, Brisbane, Australia.

McCarthy, Cheryl and Hancock, Nigel and Raine, Steven R. (2006) A preliminary evaluation of machine vision sensing of cotton nodes for automated irrigation control. In: Irrigation Australia 2006: Irrigation Association of Australia National Conference and Exhibition, 9-11 May 2006, Brisbane, Australia.

Craig, Ian and Schmidt, Erik and Scobie, Michael (2006) Evaporation control using covers - some realistic solutions for the irrigation industry. In: Irrigation Australia 2006: Irrigation Association of Australia National Conference and Exhibition, 9-11 May 2006, Brisbane, Australia.

Gillies, Malcolm H. and Smith, R. J. and Raine, Steven R. (2006) Is it possible to extract infiltration rates for variable inflow furrow irrigation? In: Irrigation Australia 2006: Irrigation Association of Australia National Conference and Exhibition, 9-11 May 2006, Brisbane, Australia.

Raine, Steven R. (2006) The future of irrigation technologies and practices is here now. In: Irrigation Australia 2006: Irrigation Association of Australia National Conference and Exhibition, 9-11 May 2006, Brisbane, Australia.

Suryasaputra, R. and Kist, A. A. and Ferra, H. L. and Palmer, R. A. and Dale, M. J. and Harris, R. J. (2006) Comparison of intra-domain traffic engineering methods. In: World Teletraffic Congress (WTC 2006), 30 April - 3 May 2006, Budapest, Hungary.

Leis, Andrew P. and Beck, Martin and Gruska, Manuela and Best, Christoph and Hegerl, Reiner and Baumeister, Wolfgang and Leis, John W. (2006) Cryo-electron tomography of biological specimens. IEEE Signal Processing Magazine, 23 (3). pp. 95-103. ISSN 1053-5888

Billingsley, John (2006) Essentials of mechatronics. John Wiley & Sons, Inc., United States. ISBN 0-471-72341-X-

Simmons, Shane (2006) Hot property investments, as safe as houses - dirty dealings and grubby grifters. Spatial Science Queensland, 2006 (2). pp. 32-37. ISSN 1032-3848

Wang, Hao and Zhang, M. X. and Shi, Z. M. and Yang, Ke (2006) Biocorrosion behaviour of magnesium alloys under pseudo-physiological conditions. Tissue Engineering, 12 (4). p. 1067. ISSN 1076-3279

Pham, Maria M. and Mills, Julie E. and Zhuge, Yan (2006) Experimental capacity assessment of cold-formed boxed stud and C stud wall systems used in Australian residential construction. Journal of Structural Engineering, 132 (4). pp. 631-635. ISSN 0733-9445

Wang, Xiaowei and Stone, C. Richard and Buttsworth, David R. and Stevens, Robert and Arita, Yoshi (2006) Finite element analysis of eroding type surface thermocouple with application to engine heat flux measurement. In: SAE 2006 World Conference and Exhibition, April 2006, Detroit, MI, USA.

Perera, L. Kithsiri and Furuya, Takahiko (2006) Leyte disaster, background and some clues to upgrade disaster mitigation plans. Asian Journal of Geoinformatics, 6 (2). pp. 23-28. ISSN 1513-6728

Apan, Armando and Sternes, Phil (2006) Mapping and spatio-temporal analysis of flooded and inundated areas in the Lower Balonne floodplain, Queensland, Australia. WSEAS Transactions on Environment and Development, 2 (4). pp. 360-367. ISSN 1790-5079

Dohnal, Ludek and Faigl, Paul (2006) Classical or 'robust' linear regression? [Klasická nebo robustní lineární regrese?]. In: 9th Yearly Seminar on Securing Quality of Analytical Results, 27-29 Mar 2006, Komorni Lhotka, Czech Republic.

McDougall, Kevin and Rajabifard, Abbas and Williamson, Ian (2006) A mixed method approach for evaluating spatial data sharing partnerships for SDI development. In: GSDI 9 International Conference for Global Spatial Data Infrastructure: Spatial Information: Tool for Reducing Poverty, 3-11 Nov 2006, Santiago, Chile.

Dowling, David (2006) Designing a competency based program to facilitate the progression of experienced engineering technologists to professional engineer status. European journal of engineering education, 31 (1). pp. 95-107. ISSN 0304-3797

Thorpe, David and Ryan, Neal (2006) Facilitating technology transfer in the construction industry. In: 2nd International Conference of the Cooperative Research Centre for Construction Innovation , 12-14 Mar 2006, Gold Coast, Australia.

Chong, Albert K.-F. and Mathieu, Renaud (2006) Near infrared photography for craniofacial anthropometric landmark measurement. Photogrammetric Record, 21 (113). pp. 16-28. ISSN 0031-868X

Apan, Armando and Kelly, Rob and Phinn, Stuart and Strong, Wayne and Lester, David and Butler, David and Robson, Andrew (2006) Predicting grain protein content in wheat using hyperspectral sensing of in-season crop canopies and partial least squares regression. International Journal of Geoinformatics, 2 (1). pp. 93-108. ISSN 1686-6576

Lee, Kuang Sheng (2006) Experimental study of the mechanical properties of particulate reinforced composite. [USQ Project] (Unpublished)

Yao, X. D. and Wu, C. Z. and Wang, Hao and Cheng, H. M. and Lu, G. Q. (2006) Effects of carbon nanotubes and metal catalysts on hydrogen storage in magnesium nanocomposite. Journal of Nanoscience and Nanotechnology, 6 (2). pp. 494-498. ISSN 1533-4880

Gambetta, Daniele Morco (2006) Sensorless technique for BLDC motors. [Thesis (_PhD/Research)] (Unpublished)

Mai-Duy, N. and Tran-Cong, T. (2006) Solving biharmonic problems with scattered-point discretization using indirect radial-basis-function networks. Engineering Analysis With Boundary Elements, 30 (2). pp. 77-87. ISSN 0955-7997

Pilane, Tshepo Skuuman (2006) Recycling consumer electrical and electronic equipment. [USQ Project] (Unpublished)

Nelson-White, Greg (2006) Abandoned shafts study (Charters Towers): a spatial solution. [USQ Project] (Unpublished)

Worrall, Nofoaluma (2006) Analysis of providing affordable electricity supply for the outer islands in the Maldives. [USQ Project] (Unpublished)

Hugo, Michael (2006) Automatic roller shell groover. [USQ Project] (Unpublished)

Fowler, Jason (2006) Cost effectiveness of suburban street lighting. [USQ Project] (Unpublished)

Tucker, Neil John (2006) Evaluation of the Queensland streets concept in residential streets in Logan City. [USQ Project] (Unpublished)

Inglis, Rientz (2006) Evaluation of VRS-RTK GPS latency in a dynamic environment. [USQ Project] (Unpublished)

Scobie, Michael (2006) Sensitivity of capacitance probes to soil cracks. [USQ Project] (Unpublished)

Bryde, Andrew Robert (2006) Terrestrial photo modelling. [USQ Project] (Unpublished)

Massaro, Aaron (2006) The effect of water ratio on the mechanical properties of refactory materials. [USQ Project] (Unpublished)

Van Erp, Gerard and Cattell, Craig and Ayers, Stephen R. (2006) A fair dinkum approach to fibre composites in civil engineering. Construction and Building Materials, 20 (1-2). pp. 2-10. ISSN 0950-0618

Mai-Duy, Nam and Tran-Cong, Thanh and Tanner, R. I. (2006) A high-order time-kernel BIEM for the Burgers equation. In: International Conference on Boundary Element Techniques VII, 4-6 September 2006, Paris, France.

Le, Phong and Mai-Duy, Nam and Tran-Cong, Thanh and Baker, Graham (2006) A meshless IRBFN-based numerical simulation of adiabatic shear band formation in one dimension. In: 2006 International Conference on Nonlinear Analysis & Engineering Mechanics Today, 11-14 Dec 2006, Ho Chi Minh City, Vietnam.

Golshani, Aliakbar and Okui, Yoshiaki and Oda, Masanobu and Takemura, Takato (2006) A micromechanical model for brittle failure of rock and its relation to crack growth observed in trixial compression tests of granite. Mechanics of Materials, 38 (4). pp. 287-303. ISSN 0167-6636

Mai-Duy, N. and Mai-Cao, L. and Tran-Cong, T. (2006) A new meshless RBF-based method for unsteady fluid flow analysis. In: Sladek, Jan and Sladek, Vladimir, (eds.) Advances in meshless methods. Tech Science Press, USA, pp. 241-262. ISBN 0-9717880-2-2

Somasundaraswaran, Kathirgamalingam (2006) Accident statistics in Sri Lanka. IATSS Research, 30 (1). pp. 115-117. ISSN 0386-1112

Ranasinghe, R. H. C. C. and Somasundaraswaran, A. K. (2006) Addressing difficulties in rural estates with limited education facilities: a research study for uplifting social harmony. In: Third Academic Sessions, University of Ruhuna, Dec 2005, Galle, Sri Lanka.

Karunasena, W. (Karu) and Williams, K. (2006) Behaviour of FRP-to-concrete bonded joints. In: ACUN-5 International Composites Conference, 11-14 July 2006, Sydney, NSW, Australia.

Wen, Peng and Li, Yan (2006) Deadline fault tolerance in a networked real-time system. In: 4th International Conference on Active Media Technology, 7-9 June 2006, Brisbane, Australia.

Springolo, Mario and Van Erp, Gerard and Khennane, Amar (2006) Design and analysis of a composite beam for infrastructure applications - Part I: preliminary investigation in bending. International Journal of Materials and Product Technology, 25 (4). pp. 297-313. ISSN 0268-1900

Springolo, Mario and Van Erp, Gerard and Khennane, Amar (2006) Design and analysis of a composite beam for infrastructure applications - Part II: preliminary investigation in shear and torsion. International Journal of Materials and Product Technology, 25 (4). pp. 313-331. ISSN 0268-1900

Springolo, Mario and Khennane, Amar and Van Erp, Gerard (2006) Design and analysis of a composite beam for infrastructure applications - Part III: experimental results and nonlinear FE analysis. International Journal of Materials and Product Technology, 25 (4). pp. 331-347. ISSN 0268-1900

Chen, Guangnan and Schultz, Justin and Sulman, Richard (2006) Design and development of a prototype small-plot research harvesting system. In: CIGR 2006: Agricultural Engineering for a Better World, 3-7 Sep 2006, Bonn, Germany.

Karunasena, W. (2006) Elastodynamic reciprocity relations for wave scattering by flaws in fiber-reinforced composite plates. In: 10th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-10), 3-5 August 2006, Bangkok, Thailand.

Karunasena, W. and Anderson, William C. (2006) Flexural behaviour of concrete beams reinforced with internal tensile steel and external CRFP. In: 1st International Conference on Computational Methods (ICCM04), 15-17 December 2004, Singapore.

Zakaria, S. and Yusaf, T. and Yusoff, M. Z. (2006) Flow and transient heat transfer in a high speed free piston tunnel: CFD simulations on turbulent and laminar flow conditions. In: 2nd International Conference on Thermal Engineering Theory and Applications (ICTEA '06), 3-6 Jan 2006, Al Ain, United Arab Emirates.

McLatchey, Graham and Billingsley, John (2006) Force and position control using pneumatic cylinders. In: 9th International Conference on Climbing and Walking Robots: CLAWAR 2006, 12-14 Sept 2006, Brussels, Belgium.

Fletcher, Duncan and Wilson, Shaun and Jokic, Michael D. and Vuletich, Ivan (2006) Guided weapon danger area generation: implementing a probabilistic approach. In: 24th AIAA Atmospheric Flight Mechanics Conference and Exhibit, 21-24 Aug 2006 , Keystone, CO, USA.

Thorpe, David and Ryan, Neal (2006) Improving technology transfer in the Australian construction industry. In: Brown, Kerry and Hampson, Keith and Brandon, Peter, (eds.) Clients driving construction innovation: moving ideas into practice. Cooperative Research Centre for Construction Innovation, Brisbane, Australia, pp. 303-312. ISBN 1-7410712-803

Craig, Ian and Schmidt, Erik and Hancock, Nigel and Barnes, Geoff and Turnbull, David J. and Pittaway, Pam and Morrison, Pippa (2006) Improving the performance of chemical monolayers in reducing farm dam evaporation. In: 3rd CRC-IF Annual Research Forum, 5-6 Dec 2006, Narrabri, New South Wales. (Unpublished)

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2006) In-situ Cu-based bulk metallic glass composite. International Journal of Modern Physics B, 20 (25-27). pp. 3963-3968. ISSN 0217-9792

Wang, Hao (2006) In-situ Si/Al composite produced by semisolid metal processing. In: ACUN-5 International Composites Conference, 11-14 July 2006, Sydney, Australia.

Omar, Tarek and Heldt, Tim and Key, P. and Van Erp, Gerard (2006) M2S2 modular deployable composite shelters: concept and loading criteria. Australian Journal of Structural Engineering, 6 (3). pp. 217-226. ISSN 1328-7982

Yao, X. and Wang, H. (2006) Modeling of semisolid structure formation in controlled nucleation method. International Journal of Modern Physics B, 20 (25-27). pp. 4123-4128. ISSN 0217-9792

Van Gool, Bronwyn and Karunasena, W. and Sivakugan, Nagaratnam (2006) Modelling the effects of blasting on paste fill. In: 1st International Conference on Computational Methods (ICCM04), 15-17 December 2004, Singapore.

Majid, Z. and Chong, A. and Setan, H. and Ahmad, A. and Rajion, Z. A. (2006) Natural features technique for non-contact three dimensional craniofacial anthropometry using stereophotogrammetry. Archives of Orofacial Sciences, 1 . pp. 42-50. ISSN 1823-8602

Yao, X. and Wang, H. and He, B. and Zhou, X. (2006) Numerical simulation of dendrite growth during solidification. International Journal of Nonlinear Sciences and Numerical Simulation, 7 (2). pp. 171-176. ISSN 1565-1339

Foley, Joseph P. and Wigginton, David and Eberhard, Jochen (2006) Optimizing overhead irrigation systems. In: Australian Cotton Conference: Product, Production, Profit - Progressing our National Advantage, 8-10 Aug 2006, Gold Coast, Australia.

Mohutsiwa, Donald A. (2006) PID tuning controller using internal model control method. [USQ Project] (Unpublished)

Murray, J. R. and Tullberg, J. N. and Basnet, B. B. (2006) Planters and their components: types, attributes, functional requirements, classification and description (ACIAR Monograph No. 121). Other. Australian Centre for International Agricultural Research, Canberra, Australia.

Lani, Ruzaini Md and Setan, Halim and Majid, Zulkepli and Chong, Albert K. (2006) Precision of landmark identification using scanned cephalometric image. In: International Symposium & Exhibition on Geoinformation 2005 (ISG 2005): Geospatial Solutions for Managing the Borderless World, 27-29 Sept 2005, Penang, Malaysia.

Brodie, I. M. (2006) Prediction of stormwater particle loads from impervious urban surfaces based on a rainfall detachment index. In: 7th International Conference on Urban Drainage Modelling and 4th International Conference on Water Sensitive Urban Design, 2-7 Apr 2006, Melbourne, Australia.

Ziri-Castro, K. I. and Evans, N. E. and Scanlon, W. G. (2006) Propagation modelling and measurements in a populated indoor environment at 5.2 GHz. In: Proceedings of the 1st IEEE International Conference on Wireless Broadband and Ultra Wideband Communications, 13-16 March 2006, Sydney, Australia.

Schmidt, Erik (2006) Reducing evaporation from storages. In: 2006 CRC-IF Annual Research Forum, 4-6 Dec 2006, Narrabri, Australia. (Unpublished)

Somasundaraswaran, A. K. and Tay, Richard (2006) Self-reported differences between crash-involved and non-crash-involved three-wheeler drivers in Sri Lanka. IATSS Research, 30 (1). pp. 68-72. ISSN 0386-1112

Wang, Hao and Xu, Jun (2006) Semisolid casting of automotive component: water pump lid. Solid State Phenomena, 116-117 . pp. 88-91. ISSN 1012-0394

Wang, H. and Yao, X. D. (2006) Semisolid structure simulation in controlled nucleation process. Solid State Phenomena, 116-117 . pp. 614-617. ISSN 1012-0394

Ku, Harry S. and Tsang, Shing Hin and Baddeley, Douglas and Snook, Chris (2006) Short bar tests for vinyl ester particulate reinforced composites cured by microwaves. Australian Journal of Structural Engineering, 7 (1). pp. 65-73. ISSN 1328-7982

Khatri, K. L. and Smith, R. J. (2006) Simulation of performance for a simple real time control system of furrow irrigation. In: 1st International Conference on Sustainable Irrigation Management, Technologies and Policies, 5-7 Sept 2006, Bologna, Italy.

Brodie, Ian and Porter, Mark (2006) Stormwater particle characteristics of five different urban surfaces. In: 7th International Conference on Urban Drainage Modelling & 4th International Conference on Water Sensitive Urban Design, 2-7 April 2006, Melbourne, Australia.

Bullen, Frank and Knight, Daniel (2006) The broad and strategic value of the freshmen engineering experience-FEE*. International Journal of Engineering Education, 22 (6). pp. 1241-1251. ISSN 0949-149X

Epaarachchi, Jayantha A. and Clausen, Philip D. (2006) The development of a fatigue loading spectrum for small wind turbine blades. Journal of Wind Engineering and Industrial Aerodynamics, 94 . pp. 207-223. ISSN 0167-6105

Fu, H. M. and Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2006) The effect of Gd addition on the glass-forming ability of Cu-Zr-Al alloy. Scripta Materialia, 55 (2). pp. 147-150. ISSN 1359-6462

Ning, Zhiliang and Wang, Hao and Sun, Jianfei (2006) The effect of initial microstructure of A356 alloys on the mechanical behavior in the semisolid state. Solid State Phenomena, 116-117 . pp. 449-452. ISSN 1012-0394

Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2006) Tungsten fibre reinforced Zr-based bulk metallic glass composites. In: ACUN-5 International Composites Conference, 11-14 July 2006, Sydney, Australia.

Amir, Al-Falahi and Yusaf, T. and Yusoff, M. Z. (2006) Universiti Tenaga Nasional short duration hypersonic test facility: calibration and verification. In: 8th Biennial ASME Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Torino, Italy.

Finch, N. A. and Murray, P. J. and Dunn, M. T. and Billingsley, J. (2006) Using machine vision classification to control access of animals to water. Animal Production Science, 46 (6-7). pp. 837-839. ISSN 0816-1089

Billingsley, John and Dunn, Mark and Bell, David (2006) Vision based macadamia yield assessment. Sensor Review, 26 (4). pp. 312-317. ISSN 0260-2288

Ku, Harry S. and Puttgunta, V. C. and Trada, Mohan (2006) Young's modulus of vinyl ester composites cured by microwave irradiation: preliminary results. Journal of Electromagnetic Waves and Applications, 20 (14). pp. 1911-1924. ISSN 0920-5071

Liu, Hong-Yuan and Yan, Wenyi and Mai, Yiu-Wing (2006) Z-pin bridging in composite laminates and some related problems. In: ACAM 2005: Australasian Congress on Applied Mechanics, 16-18 Feb 2005, Melbourne, Australia.

Tran, Canh-Dung and van der Heijden, G. H. M. and Phillips, David G. (2006) Issues in processing unstable twisted fibre assemblies. In: 4th International Industrial Simulation Conference (ISC 2006), 5-7 Jun 2006, Palermo, Italy.

2005

Dunn, Mark and Billingsley, John (2005) Automated macadamia nut orchard yield monitoring. In: 12th Annual Conference on Mechatronics and Machine Vision in Practice, 29 Nov - 1 Dec 2005, Manila, Phillipines.

Dunn, Mark and Billingsley, John and Bell, David (2005) Field testing of vision based macadamia yield monitoring. In: 12th Annual Conference on Mechatronics and Machine Vision in Practice, 29 Nov - 1 Dec 2005, Manila, Phillipines.

Liu, X. and Peterson, J. and Zhang, Z. (2005) High-resolution DEM generated from LiDAR data for water resource management. In: MODSIM05: International Congress on Modelling and Simulation: Advances and Applications for Management and Decision Making, 12-15 Dec 2005, Melbourne, Australia.

Wandel, Andrew P. and Klimenko, Alexander Y. (2005) Testing multiple mapping conditioning mixing for Monte Carlo probability density function simulations. Physics of Fluids, 17 (12). pp. 128105-1. ISSN 1070-6631

Gibbings, Peter and Raine, Steven R. (2005) Evaluation of a hydrographic technique to measure on-farm water storage volumes. Agricultural Water Management, 78 (3). pp. 209-221. ISSN 0378-3774

Billingsley, John (2005) Machine vision applications in agriculture. In: 9th International Conference on Mechatronics Technology, 5-7 December, 2005, Kuala Lumpur, Malaysia.

Lokuge, Weena P. and Sanjayan, J. G. and Setunge, Sujeeva (2005) Stress-strain model for laterally confined concrete. Journal of Materials in Civil Engineering, 17 (6). pp. 607-616. ISSN 0899-1561

Gibbings, Peter and McDougall, Kevin (2005) Are equipment simulators effective when used for technology-based training? Journal of Spatial Science, 50 (2). pp. 79-89. ISSN 1449-8596

Majid, Zulkepli and Setan, Halim and Ahmad, Anuar and Chong, Albert (2005) Craniofacial stereo mapping: improving accuracy with natural points. New Zealand Surveyor (295). pp. 5-10. ISSN 0048-0150

Ng, K. C. and Yusoff, M. Z. and Yusaf, T. F. and Hussein, I. (2005) Development status of indigenous computational fluid dynamics software for arbitrary complex geometry. Institution of Engineers, Malaysia. Journal, 66 (4). pp. 15-22. ISSN 0126-513X

Craig, Ian P. (2005) Evaporation control using covers. In: 15th Queensland Water Symposium (IEAust Water Panel), 23-24 Nov 2005, Brisbane, Australia.

Xiang, Wei and Pietrobon, Steven S. and Leis, John (2005) Exit chart analysis of parallel data convolutional codes. In: ISPACS 2005: International Symposium on Intellegent Signal Processing and Communication Systems, 13-16 Dec 2005, Hong Kong.

Schmidt, Erik (2005) Irrigation challenges in Australia and technological solutions. In: 15th Queensland Water Symposium (IEAust Water Panel), 23-24 Nov 2005, Brisbane, Australia. (Unpublished)

Liu, Yan and Phinn, Stuart (2005) Modelling the driving forces of Sydney's urban development (1971-96) in a cellular environment. Applied Geographic Information Systems (GIS), 1 (3). ISSN 1832-5505

Abdalla, Fouad Kamel (2005) Modelling and assessment of an experimental combined evacuated-tubes-direct-flat-plate solar heater. In: 43rd Annual Conference of the Australian and New Zealand Solar Energy Society (Solar05), 28-30 Nov 2005, Dunedin, New Zealand.

Campbell, Nicholas (2005) Analysing the effect of speed variation on irrigation efficiency in travelling irrigators. [USQ Project] (Unpublished)

Howard, E. and Misra, R. and Loch, Rob and Le, Minh N. (2005) Laundry grey water potential impact on Toowoomba soils - final report. Project Report. University of Southern Queensland, National Centre for Engineering in Agriculture , Toowoomba, Australia.

Mossad, Ruth and Schillak, Thomas and Malli, Mike (2005) Numerical simulation of open refrigerated display cabinets. In: Third International Conference on Energy Research and Development (ICERD-3), 21-23 Nov 2005, State of Kuwait.

Parsons, David (2005) Semiconductors and the environment. What's New in Electronics, 25 (6). pp. 12-13. ISSN 0728-3873

Ren, Yibin and Huang, Jingjing and Yang, Ke and Zhang, Bingchun and Yao, Zhiming and Wang, Hao (2005) Study of bio-corrosion of pure magnesium. Acta Metallurgica Sinica (Jinshu Xuebao), 41 (11). pp. 1228-1232. ISSN 0412-1961

Lee, Chang Long (2005) A study and evaluation on Seri Wawasan bridge in Putrajaya, Malaysia. [USQ Project] (Unpublished)

Chan, Man Piu (2005) Analysis and modeling of grouting and its application in civil engineering. [USQ Project] (Unpublished)

Falken, Jason (2005) Critical review of techniques for rigid spoolpiece metrology observation and reduction. [USQ Project] (Unpublished)

Prasser, Mark (2005) Durability of hybrid concrete-FRP bridge decks. [USQ Project] (Unpublished)

Mohamed Ibrahim, Saifudin Bin (2005) The PID controller design using genetic algorithm. [USQ Project] (Unpublished)

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2005) Overview of external post-tensioning in bridges. In: 2005 Southern Region Engineering Conference: Managing Resources for a Sustainable Future (SREC 2005), 15 Oct 2005, Toowoomba, Australia.

Thompson, Dean (2005) A four quadrant adjustable speed drive for series wound DC motors. [USQ Project] (Unpublished)

Trent, Stephen Wade (2005) A habitat suitability index model for the trapdoor spider species, 'Arbanitis variabilis'. [USQ Project] (Unpublished)

Tanoi, Levei (2005) A model to establish a global navigation satellite system (GNSS) testing and validation center at the University of Southern Queensland. [USQ Project] (Unpublished)

Rizzo Naudi, Antonello (2005) A quality assurance system at the Land Survey and Mapping Unit (Malta). [USQ Project] (Unpublished)

Kannapiran, Ram Kumar M. (2005) A study and evaluation on SMART Project, Malaysia. [USQ Project] (Unpublished)

Leow, Jia Hui (2005) A study of building foundations in Malaysia. [USQ Project] (Unpublished)

Grant, Robert Kenneth (2005) A study of the ground and vegetation effects on the propagation of road traffic noise in south east Queensland. [USQ Project] (Unpublished)

Gibbings, Peter and McDonald, Adam (2005) An evaluation of geoid models on the Great Dividing Range escarpment. Spatial Science Queensland, 2005 (5). pp. 30-37. ISSN 1032-3848

Quarisa, Matthew (2005) An inexpensive hardware-based identification system for improved computer security. [USQ Project] (Unpublished)

Lynch, Jason Michael (2005) An internet based SCADA system. [USQ Project] (Unpublished)

Janke, Scott (2005) Analysis of a sheet metal bucket elevator head. [USQ Project] (Unpublished)

Harber, Paul James (2005) Applicability of no-fines concrete as a road pavement. [USQ Project] (Unpublished)

Wilson, Maree (2005) Applications of geospatial information technology for fire risk assessment and management in NSW. [USQ Project] (Unpublished)

Jacobs, Peter Gregory (2005) Assessing RTK GPS for a suburban survey practice. [USQ Project] (Unpublished)

Babin, Robyn E. (2005) Assessment of factors influencing water reuse opportunities in Western Australia. [USQ Project] (Unpublished)

Tozer, Paul (2005) Assessment of the feasibility of a terrestrial scanner in underground and surface mining at BHPB Cannington mine. [USQ Project] (Unpublished)

Luckemeyer, Nils (2005) Assisted standing and walking mode for Robug IV eight legged robot. [USQ Project] (Unpublished)

Littleton, Craig Andrew (2005) Autonomous unmanned aerial surveillance vehicle - autonomous control and flight dynamics. [USQ Project] (Unpublished)

Ho, Khoon Chy Randal (2005) Balancing wheeled robot. [USQ Project] (Unpublished)

Mak, Chi Keung (2005) Benefit of partnering in the Hong Kong construction industry. [USQ Project] (Unpublished)

Gravatt, Manu Richard (2005) Burdekin Falls Dam: investigation of the structural integrity of the outlet works radial gate and fixed wheel gate under emergency closure situations. [USQ Project] (Unpublished)

O'Neil, Anthony M. (2005) Chassis design for SAE racer. [USQ Project] (Unpublished)

Gwynne, Aeolyn (2005) Cloud detection system for the Mt Kent observatory. [USQ Project] (Unpublished)

Garrard, Brian John (2005) Comparison of moisture density relationship tests in civil engineering materials. [USQ Project] (Unpublished)

Wong, Wei Loon (2005) Compressed natural gas as an alternative fuel in diesel engines. [USQ Project] (Unpublished)

Chan, Teck Wai Alan (2005) Computational fluid dynamics (CFD): investigation for improving pigs' housing design. [USQ Project] (Unpublished)

Outschoorn, Jeremy Paul (2005) Computational fluid mechanics investigation of ventilation aboard a livestock vessel. [USQ Project] (Unpublished)

Kong, Mun Kai (2005) Control of early thermal cracking of raft foundation by using slagcrete portland blast-furnace cement (PBFC). [USQ Project] (Unpublished)

Ali, Noorahmad Bin (2005) Corrosion in the boiler tubes of the Tuas South Incineration Plant, Singapore. [USQ Project] (Unpublished)

Miletic, Alista (2005) Current controller for inverter bridge designed for grid-connected photovoltaic system. [USQ Project] (Unpublished)

Schultz, Justin (2005) Design and development of a prototype, small plot research harvesting system. [USQ Project] (Unpublished)

Gounder, Sangeevam (2005) Design of steel structures under fire. [USQ Project] (Unpublished)

Law, Boon Lee (2005) Develop a system to monitor, analyse and report health data captured during exercise. [USQ Project] (Unpublished)

Stimela, David Master (2005) Developing a methodology using multi spectral remote sensing data for mapping vegetation change - a key variable in soil erosion mapping. [USQ Project] (Unpublished)

Harber, Matthew (2005) Development of a drivetrain system for a formula SAE-A race car. [USQ Project] (Unpublished)

Domrow, Ryan (2005) Development of a mechanical testing system to investigate road deformation. [USQ Project] (Unpublished)

Al-Busaidi, Ibrahim A. (2005) Economics of photovoltaic water pumping system in Sultanate of Oman. [USQ Project] (Unpublished)

Thorpe, David and Fulcher, Robert (2005) Educating engineers for a sustainable future. In: 2005 Southern Engineering Conference: Managing Resources for a Sustainable Future, 15 Oct 2005, Toowoomba, Australia.

Luther, Steven (2005) Effect of existing cracks in shear strengthening of concrete girders with external post tensioning. [USQ Project] (Unpublished)

Whittaker, Todd (2005) Effect of existing cracks in shear strengthening of concrete girders with external post-tensioning. [USQ Project] (Unpublished)

Molloy, Reuben (2005) Electronic systems for the USQ formula SAE racer. [USQ Project] (Unpublished)

Teo, Kian Peng (2005) Electronics and the environment - Singapore perspective. [USQ Project] (Unpublished)

Brown, Simon Neil (2005) Embedded IP for small devices. [USQ Project] (Unpublished)

Plank, Melinda (2005) Engine optimisation and performance characteristics for a formula SAE race car. [USQ Project] (Unpublished)

Fenwick, Wayne (2005) Evaluation of control for the adjustment of the digital cadastral data base (DCDB). [USQ Project] (Unpublished)

Yap, Lee Jiuan (2005) Evaluation of wet scrubber systems. [USQ Project] (Unpublished)

Chuah, Yew Pin (2005) Evolutionary structural optimization for multi component structural systems. [USQ Project] (Unpublished)

Kamali, Khalid (2005) Fractal video compression. [USQ Project] (Unpublished)

Lee, Kwan Shing (2005) Fracture analysis of vinyl ester composites under microwave condition. [USQ Project] (Unpublished)

Sivongxay, Amphone (2005) Hydraulic properties of Toowoomba soils for laundry water reuse. [USQ Project] (Unpublished)

Costa, Michael (2005) In-vehicle display system. [USQ Project] (Unpublished)

Gillies, Malcolm H. and Smith, R. J. (2005) Infiltration parameters from surface irrigation advance and run-off data. Irrigation Science, 24 (1). pp. 25-35. ISSN 0342-7188

Deith, Peter (2005) Instrumentation to track the southern elephant seal. [USQ Project] (Unpublished)

Gillies, Ross Donald (2005) Investigation into the non-invasive monitoring of blood glucose levels in people with diabetes. [USQ Project] (Unpublished)

Clague, Stephen John (2005) Investigation of relationships between skid resistant deficient pavement and aggregate by GIS and statistical analysis. [USQ Project] (Unpublished)

Ng, Hai Ching (2005) Investigation of tenable carbon monoxide and visibility level for a fired room. [USQ Project] (Unpublished)

Davis, Shawn Wayne (2005) Investigation of the flexural strengthening of concrete beams using external prestressing. [USQ Project] (Unpublished)

Le, Minh N. (2005) Investigation on reuse potential of laundry water for household garden irrigation in Toowoomba. [USQ Project] (Unpublished)

Tan, Kevin Chin Ning (2005) Life cycle assessment of a mobile phone. [USQ Project] (Unpublished)

Hikwama, Baipaki Pakson (2005) Life cycle assessment of a personal computer. [USQ Project] (Unpublished)

Teo, Chin Teng (2005) Lifting mechanism of wheelchair. [USQ Project] (Unpublished)

Airs, Leslie (2005) Mobile robot guidance and navigation. [USQ Project] (Unpublished)

Wells, Colin G. and Ball, James A. R. (2005) Mode-matching analysis of a shielded rectangular dielectric-rod waveguide. IEEE Transactions on Microwave Theory and Techniques, 53 (10). pp. 3169-3177. ISSN 0018-9480

Yusaf, T. F. and Fong, S. F. and Yusoff, M. Z. and Hussein, I. (2005) Modeling of transient heat flux in spark ignition engine during combustion and comparisons with experiments. American Journal of Applied Sciences, 2 (10). pp. 1438-1444. ISSN 1546-9239

Dawson, Kim Maree (2005) Modelling load balance type static var compensator control system response. [USQ Project] (Unpublished)

Harrison, Rodney James (2005) Modelling Tamworth regional council stormwater network. [USQ Project] (Unpublished)

Khan, Nizam (2005) Multimedia database search techniques. [USQ Project] (Unpublished)

Dyke, Geoffrey Wayne (2005) Optimising condenser air extraction to reduce greenhouse gas emissions at the Loy Yang B power station. [USQ Project] (Unpublished)

Anderson, Troy Dennis (2005) Prioritisation of guard rail remediation works. [USQ Project] (Unpublished)

Heit, Jamie (2005) Quality assurance for virtual reference stations. [USQ Project] (Unpublished)

Crouch, Glen (2005) Rationalisation of wastewater treatment plants in Launceston. [USQ Project] (Unpublished)

Struthers, Craig (2005) Real-time monitoring and control of a pressure control system. [USQ Project] (Unpublished)

Parsons, David (2005) Rechargeables have the edge - environmentally. What's New in Electronics, 25 (5). pp. 40-41. ISSN 0728-3873

Aravinthan, Vasantha (2005) Reclaimed wastewater as a resource for sustainable water management. In: 2005 Southern Region Engineering Conference: Managing Resources for a Sustainable Future (SREC 2005), 15 Oct 2005, Toowoomba, Australia.

Chan, Lai Kuan (2005) Reduction of nitrogen oxides (NOx) using liquefied petroleum gas (LPG) in spark ignition (SI) engine. [USQ Project] (Unpublished)

Lim, Chuan Jye (2005) Relationship contracting in Malaysia. [USQ Project] (Unpublished)

Ong, Willy (2005) Remote monitoring and instrumentation for Mount Kent Observatory. [USQ Project] (Unpublished)

Maseko, Mfana Elphus (2005) Restitution of land for agricultural development Ehlanzeni region Mpumalanga. [USQ Project] (Unpublished)

Welsh, Trevor James (2005) Reverse osmosis water purification unit: for government and non-government use in disaster relief. [USQ Project] (Unpublished)

Choi, Richard Fun Yiu (2005) Review of the jet grouting method. [USQ Project] (Unpublished)

Harrison, Elissa Louise (2005) Road stabilisation issues in southern district of the Department of Main Roads, Queensland. [USQ Project] (Unpublished)

Gupta, Madan and George, Doug and Basnet, Badri Bahadur (2005) Seed identification using a computerised database. Seed Science and Technology, 33 (3). pp. 647-654. ISSN 0251-0952

Pillay, Ravindra Sen (2005) Short-term water demand forecasting for production optimisation. [USQ Project] (Unpublished)

Ong, Gimhua (2005) Software development for power system analysis. [USQ Project] (Unpublished)

McGovern, Mark (2005) Spatial analysis of Tasmanian Devil facial tumour disease. [USQ Project] (Unpublished)

Willmott, Peter (2005) Stabilisation of Goulburn Valley soils for the improvement of subgrades in new low traffic pavement construction. [USQ Project] (Unpublished)

Popa, Cristina Elena (2005) Steering system and suspension design for 2005 formula SAE-A car. [USQ Project] (Unpublished)

Baillie, Craig Peter and Raine, Steven R. (2005) Strategies for maximizing sugarcane yield with limited water in the Bundaberg district. In: Annual Australian National Committee on Irrigation and Drainage (ANCID) Conference, 23-26 Oct 2005, Mildura, Australia.

Field, Benjamin J. (2005) Stress analysis of axially loaded perforated steel plates by experimental and finite element methods. [USQ Project] (Unpublished)

Garget, Dennis (2005) Testing of robotic total stations for dynamic tracking. [USQ Project] (Unpublished)

Knox, Soz Deja (2005) The autonomous unmanned aerial surveillance vehicle navigation and user interface. [USQ Project] (Unpublished)

McDonald, Scott (2005) The behaviour of hybrid fiber composite beams. [USQ Project] (Unpublished)

French, Vivienne Joyce (2005) The investigation into modes of failure of total hip replacements. [USQ Project] (Unpublished)

Wilson, David Orme (2005) The resolution of uncertain boundaries at Amity Point (North Stradbroke Island). [USQ Project] (Unpublished)

Law, Bee Bee (2005) The usage of domestic water filtration systems in Malaysia. [USQ Project] (Unpublished)

Earl, David (2005) To determine if there is a correlation between the shrink swell index and atterberg limits for soils within the Shepparton Formation. [USQ Project] (Unpublished)

Wong, Alan (2005) Using GIS to explore the relationship between road grade and accidents. [USQ Project] (Unpublished)

Chong, Chuen Kiong Frederick (2005) Vehicle undercarriage scanning system. [USQ Project] (Unpublished)

Farmer, Belinda (2005) Video compression using ITU-T recommendation H.264. [USQ Project] (Unpublished)

Rajion, Zainul and Suwardhi, Deni and Setan, Halim and Chong, Albert K. and Majid, Zulkepli and Ahmad, Anuar B. and Samsudin, Abdul Rani and Izhar, Ab. Aziz and Harun, Wan Ab. Rahman Wan (2005) Coordinate systems integration for development of Malaysian craniofacial database. In: 27th International Conference of the IEEE Engineering in Medicine and Biology Society (EMBS), 1-4 Sept 2005, Shanghai, China.

Jokic, Michael D. and Longuski, James M. (2005) Artificial gravity and abort scenarios via tethers for human missions to Mars. Journal of Spacecraft and Rockets, 42 (5). pp. 883-889. ISSN 0022-4650

Aravinthan, Thiru and Fahey, Paul and Worden, John (2005) Assessing individual student performance in a team-based engineering problem solving course. In: 4th ASEE/AaeE Global Colloquium on Engineering Education, 26-29 Sept 2005, Sydney, Australia.

Fontana, Denise C. and Potgieter, Andries B. and Apan, Armando (2005) Assessing the relationship between shire winter crop yield and multi-temporal MODIS NDVI and EVI images. In: 2005 Spatial Sciences Institute Biennial Conference: Spatial Intelligence, Innovation and Praxis (SSC2005), 12-16 Sep 2005, Melbourne, Australia.

Ahfock, Tony L. and Hewitt, Andrew (2005) Curvature-related eddy-current losses in laminated axial flux machine cores. IET Electric Power Applications, 152 (5). pp. 1350-1358. ISSN 1350-2352

Apan, Armando and Datt, B. and Kelly, Rob (2005) Detection of pests and diseases in vegetable crops using hyperspectral sensing: a comparison of reflectance data for different sets of symptoms. In: 2005 Spatial Sciences Institute Biennial Conference: Spatial Intelligence, Innovation and Praxis (SSC2005), 12-16 Sep 2005, Melbourne, Australia.

Omar, T. and Heldt, T. and Key, P. and Van Erp, G. (2005) Development of modular deployable composite shelters. In: ASEC 2005: 5th Australian Structural Engineering Conference , 11-14 Sep 2005, Newcastle, Australia.

Ku, Harry S. and Cheng, Y. M. and Snook, Chris and Baddeley, Douglas (2005) Drop weight impact test fracture of vinyl ester composites: micrographs of pilot study. Journal of Composite Materials, 39 (18). pp. 1607-1620. ISSN 0021-9983

Khatri, K. L. and Smith, R. J. (2005) Evaluation of methods for determining infiltration parameters from irrigation advance data. Irrigation and Drainage, 54 (4). pp. 467-482. ISSN 1531-0361

Sohn, J. H. and Smith, R. J. and Hudson, N. A. and Choi, H. L. (2005) Gas sampling efficiencies and aerodynamic characteristics of a laboratory wind tunnel for odour measurement. Biosystems Engineering, 92 (1). pp. 37-46. ISSN 1537-5110

Thorpe, David and Ahfock, Tony (2005) Internationalisation of Technology and Society course at University of Southern Queensland. In: 4th ASEE/AaeE Global Colloquium on Engineering Education, 26-29 Sept 2005, Sydney, Australia.

Teixeira, P. C. and Misra, R. K. (2005) Measurement and prediction of nitrogen loss by simulated erosion events on cultivated forest soils of contrasting structure. Soil and Tillage Research, 83 (2). pp. 204-217. ISSN 0167-1987

Ahfock, Tony L. and Hewitt, Andrew (2005) Modeling of the solid rotor induction motor. In: AUPEC 2005: 15th Australasian Universities Power Engineering Conference, 25-28 Sep 2005, Hobart, Australia.

Yusoff, M. Z. and Hussein, I. and Yusaf, T. and Ahmad, Z. (2005) Modeling of viscous flows in two-dimensional turbomachinery cascade via viscous-inviscid interaction method. Institution of Engineers, Malaysia. Journal , 66 (3). pp. 14-20. ISSN 0126-513X

Apan, Armando and Chandler, Owen and Young, Frank R. and Maraseni, Tek Narayan (2005) Opportunities and limitations of remote sensing for crop loss (hail damage) assessment in the insurance industry. In: 2005 Spatial Sciences Institute Biennial Conference: Spatial Intelligence, Innovation and Praxis (SSC2005), 12-16 Sep 2005, Melbourne, Australia.

Potgieter, Andries B. and Apan, Armando and Hammer, Graeme L. and Dunn, Peter K. (2005) Spying on the winter wheat crop - generating objective planted area and crop production estimates using MODIS imagery. In: SSC 2005 Spatial Sciences Institute Biennial Conference, 12-16 Sep 2005, Melbourne, Australia.

Liang, Qing Quan and Uy, Brian and Liew, J. Y. Richard (2005) Strength of concrete-filled steel box columns with local buckling effects. In: 2005 Australian Structural Engineering Conference (ASEC 2005), 11-14 September, 2005, Newcastle, Australia.

Brodie, Ian (2005) Suspended solids in stormwater runoff from various urban surfaces. Project Report. University of Southern Queensland, Faculty of Engineering and Surveying, Toowoomba, Australia.

Ayers, Ron (2005) Use of online discussion groups to increase student understanding of global social and technical issues. In: 4th ASEE/AaeE Global Colloquium on Engineering Education, 26-29 Sep 2005, Sydney, Australia.

Mai-Duy, N. and Tanner, R. I. (2005) Computing non-Newtonian fluid flow with radial basis function networks. International Journal for Numerical Methods in Fluids, 48 (12). pp. 1309-1336. ISSN 0271-2091

Kist, Alexander A. and Lloyd-Smith, Bill and Harris, Richard J. (2005) A simple IP flow blocking model. In: 19th International Teletraffic Congress (ITC19), 29 August - 2 Sept. 2005, Beijing, China.

Yusaf, T. F. and Yusoff, M. Z. and Hussein, I. and Fong, S. H. (2005) A quasi one-dimensional simulation of a 4 stroke spark ignition hydrogen fuelled engine. American Journal of Applied Sciences, 2 (8). pp. 1206-1212. ISSN 1546-9239

Brodie, Ian (2005) Stormwater particles and their sampling using passive devices. In: 10th International Conference on Urban Drainage, 21-26 Aug 2005, Copenhagen, Denmark.

Aravinthan, Thiru and Heldt, Tim (2005) Strengthening of bridge headstocks with external post-tensioning: design issues and strengthening techniques. In: Road System and Engineering Technology Forum, 9-11 August 2005, Brisbane, Australia.

Raine, Steven R. and Durack, Matthew K. (2005) The future direction of on-farm irrigation technologies and practice research. In: The New Age of Cotton - Managing Change and Risk in your Environment, 17-18 Aug 2005, Narrabri, Australia.

Davey, Scott W. and Heldt, Tim and Van Erp, Gerard and Ayers, Stephen R. (2005) Vinylester/cenosphere composite materials for civil and structural engineering. FRP International : The Official Newsletter of the International Institute for FRP in Construction, 2 (3). pp. 2-5.

Mai-Duy, N. and Tanner, R. I. (2005) Solving high-order partial differential equations with indirect radial basis function networks. International Journal for Numerical Methods in Engineering, 63 (11). pp. 1636-1654. ISSN 0029-5981

Liu, Weili and Zhang, H. F. and Hu, Z. Q. and Wang, Hao (2005) Formation and mechanical properties of Mg65Cu25Er10 and Mg65Cu15Ag10Er10 bulk amorphous alloys. Journal of Alloys and Compounds, 397 (1-2). pp. 202-206. ISSN 0925-8388

Van Erp, Gerard and Cattell, Craig and Heldt, Tim (2005) Fibre composite structures in Australia's civil engineering market: an anatomy of innovation. Structural Control and Health Monitoring, 7 (3). pp. 150-160. ISSN 1365-0556

Mai-Duy, Nam and Tran-Cong, Thanh (2005) An efficient indirect RBFN-based method for numerical solution of PDEs. Numerical Methods for Partial Differential Equations, 21 (4). pp. 770-790. ISSN 0749-159X

Coons, J. and Halley, P. and McGlashan, S. and Tran-Cong, T. (2005) Bounding the stability and rupture condition of emulsion and foam films. Chemical Engineering Research and Design, 83 (A7). pp. 915-925. ISSN 0263-8762

Buttsworth, David R. and Stevens, Robert and Stone, C. Richard (2005) Eroding ribbon thermocouples: impulse response and transient heat flux analysis. Measurement Science and Technology, 16 (7). pp. 1487-1494. ISSN 0957-0233

Liu, W. Y. and Zhang, H. F. and Hu, Z. Q. and Wang, H. and Yao, X. D. (2005) Fabrication of bulk amorphous Mg65Cu25Gd10 alloy of 12mm rod by water quenching. In: Ke, W. and Han, E. H. and Han, Y. F. and Kainer, K. and Luo, A. A., (eds.) Magnesium – Science, Technology and Applications. Trans Tech Publications Inc., Zurich, Switzerland, pp. 211-214. ISBN 978-087849968-7

Perera, L. Kithsiri (2005) Tsunami disaster of Sri Lanka, its uniqueness, affect, and some damage mitigation possibilities. Asian Journal of Geoinformatics, 5 (3). pp. 112-118. ISSN 1513-6728

Misra, R. K. and Raine, Steven R. and Pezzaniti, David and Charlesworth, Philip and Hancock, Nigel (2005) A scoping study on measuring and monitoring tools and technology for precision irrigation. Other. CRC for Irrigation Futures, Toowoomba, Australia.

Wang, Hao (2005) Bulk metallic glass composites. Journal of Materials Science and Technology, 21 (s1). pp. 86-90. ISSN 1005-0302

Jin, Tao (2005) GIS for house hunters: a case study in Toowoomba. [USQ Project] (Unpublished)

Pena, Mario de la (2005) Historical identification and mapping. [USQ Project] (Unpublished)

Yao, X. and Wu, C. Z. and Wang, H. and Cheng, H. M. and Lu, G. Q. Max (2005) Hydrogen storage of magnesium-based nanocomposites system. Journal of Materials Science & Technology, 21 (s 1). pp. 57-60. ISSN 1005-0302

Ng, K. C. and Yusoff, M. Z. and Yusaf, T. F. (2005) Numerical computation of high speed turbulent flow using coupled solution technique with standard K-epsilon turbulence model. Journal of Mechanical Engineering, 2 (1). pp. 79-92. ISSN 1823-5514

Baker, Anthony John (2005) The NOW Map: consistent, dynamic and contemporary geospatial information. [Thesis (_PhD/Research)] (Unpublished)

Abdullah, Shahrir and Yousif, B. F. and Sopian, Kamaruzzaman (2005) Design consideration of low temperature differential double-acting Stirling engine for solar application. Renewable Energy, 30 (1). pp. 1923-1941. ISSN 0960-1481

Aravinthan, Thiru and Witchukreangkrai, Eakarat and Mutsuyoshi, Hiroshi (2005) Flexural behavior of two-span continuous prestressed concrete girders with highly eccentric external tendors. ACI Structural Journal, 102 (3). pp. 402-411. ISSN 0889-3241

Craig, Ian and Schmidt, Erik and Green, Andrew and Scobie, Michael (2005) Controlling evaporation from on-farm storages. In: Irrigation Australia 2005: Irrigation Association of Australia National Conference and Exhibition: Restoring the Balance, 17-19 May 2005, Townsville, Australia.

Perera, Kithsiri and Herath, Srikantha (2005) Detecting tsunami damage from satellite data in Sri Lanka. Asian Journal of Geoinformatics, 5 (2). pp. 38-44. ISSN 1513-6728

Raine, Steven R. and Purcell, Jim and Schmidt, Erik (2005) Improving whole farm and infield irrigation efficiencies using Irrimate tools. In: Irrigation Australia 2005: Irrigation Association of Australia National Conference and Exhibition: Restoring the Balance, 17-19 May 2005, Townsville, Australia.

Wigginton, David and Foley, Joseph P. (2005) Planning for successful centre pivot and lateral move purchase. In: Irrigation Australia 2005: Irrigation Association of Australia National Conference and Exhibition: Restoring the Balance, 17-19 May 2005, Townsville, Australia.

El-Tayeb, N. S. M. and Yousif, B. F. and Yap, T. C. (2005) Tribological studies of polyester reinforced with CSM 450-R-glass fiber sliding against smooth stainless steel counterface. Wear, 261 (3-4). pp. 443-452. ISSN 0043-1648

Hewitt, Andrew and Ahfock, Tony L. (2005) Sub-domain scaling for finite element analysis of electrical machines. IET Electric Power Applications, 152 (2). pp. 149-156. ISSN 1350-2352

Fu, H. M. and Zhang, H. F. and Wang, Hao and Zhang, Qingsheng and Hu, Z. Q. (2005) Synthesis and mechanical properties of Cu-based bulk metallic glass composites containing in-situ TiC particles. Scripta Materialia, 52 (7). pp. 669-673. ISSN 1359-6462

Mai-Duy, N. and Tanner, R. I. (2005) An effective high order interpolation scheme in BIEMs for biharmonic boundary value problems. Engineering Analysis with Boundary Elements, 29 (3). pp. 210-223. ISSN 0955-7997

Loch, R. J. and Grant, C. G. and McKenzie, D. C. and Raine, S. R. (2005) Improving plants’ water use efficiency and potential impacts from soil structure change - research investment opportunities. Final report to the National Program for Sustainable Irrigation. CRCIF Report number 3.14/1. Project Report. Land and Water Australia, Canberra.

Bhaskaran, Sunil and Forster, Bruce and Neal, Trevor (2005) Integrating remote sensing and geographic information systems for 'fire hazard categorisation'. Geocarto International, 20 (1). pp. 43-49. ISSN 1010-6049

Eagle, Michael Allan (2005) Numerical investigation of the thermal efficiency of glass refrigeration doors. [USQ Project] (Unpublished)

Majid, Zulkepli and Chong, Albert K. and Ahmad, Anuar and Setan, Halim and Samsudin, Abdul Rani (2005) Photogrammetry and 3D laser scanning as spatial data capture techniques for a national craniofacial database. Photogrammetric Record, 20 (109). pp. 48-68. ISSN 0031-868X

Raine, S. R. and Meyer, W. S. and Rassam, D. W. and Hutson, J. L. and Cook, F. J. (2005) Soil-water and salt movement associated with precision irrigation systems - research investment opportunities. Technical Report. Land and Water Australia, Canberra, Australia.

Epaarachchi, Jayantha A. (2005) Effects of static fatigue on the tension-tension fatigue life of glass / polyester composites. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005): Advances in Applied Mechanics, 16-18 Feb 2005, Melbourne, Australia.

Khennane, Amar and Melchers, Robert E. (2005) A meso-scale finite element model for environmental stress corrosion of GFRP. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005): Advances in Applied Mechanics, 16-18 Feb 2005, Melbourne, Australia.

Xiang, Wei and Pietrobon, Steven S. (2005) A new class of parallel data convolutional codes. In: AusCTW 2005: 6th Australian Communications Theory Workshop, 2-4 Feb 2005, Brisbane, Australia.

Maraseni, Tek Narayan and Cockfield, Geoff and Apan, Armando (2005) Community based forest management systems in developing countries and eligibility for clean development mechanism. Journal of Forest and Livelihood, 4 (2). pp. 31-42. ISSN 1684-0186

Smith, R. J. and Raine, Steven R. and Minkevich, John (2005) Irrigation application efficiency and deep drainage potential under surface irrigated cotton. Agricultural Water Management, 71 (2). pp. 117-130. ISSN 0378-3774

Yan, Wenyi (2005) Mechanics examination on the wear behaviour of shape memory alloys. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005): Advances in Applied Mechanics, 16-18 Feb 2005, Melbourne, Australia.

Mai-Duy, Nam (2005) Solving high order ordinary differential equations with radial basis function networks. International Journal for Numerical Methods in Engineering, 62 (6). pp. 824-852. ISSN 0029-5981

Moody, Bradley John (2005) Control and instrumentation for the USQ Formula SAE-A race car. [USQ Project] (Unpublished)

Woolf, Rodney J. (2005) Data mining using Matlab. [USQ Project] (Unpublished)

Lim, Doou Gie (2005) Design and development of a conveyor system for semiconductor industry. [USQ Project] (Unpublished)

Gordon, Craig (2005) Determination of insitu flexible moduli of modified pavement materials. [USQ Project] (Unpublished)

Wiltshire, Mark (2005) Greywater reuse in urban areas. [USQ Project] (Unpublished)

Wong, Teck Shim (2005) Jigs for checking machine alignment. [USQ Project] (Unpublished)

Teoh, Eang Aun (2005) Numerical modelling of complex slope using FLAC/SLOPE. [USQ Project] (Unpublished)

Lim, Chun Hao (2005) Replacement of chiller system of a terminal building. [USQ Project] (Unpublished)

Chia, Wee Chong (2005) Research and development of multi purpose carbide end mill. [USQ Project] (Unpublished)

Leong, Weng Wah (2005) The impact of trenching on urban road operation and maintenance. [USQ Project] (Unpublished)

Kist, Alexander A. (2005) A flow blocking model for IP overflow traffic. In: 11th Asia-Pacific Conference on Communications, 3-5 Oct 2005, Perth, Australia.

Gibbings, Peter and Morgan, Michael J. (2005) A guide for entry level PBL courses in engineering. International Journal of Continuing Engineering Education and Life-Long Learning, 15 (3/4/5/6). pp. 276-290. ISSN 1560-4624

Mai-Cao, L. and Tran-Cong, T. (2005) A meshless IRBFN-based method for transient problems. CMES: Computer Modeling in Engineering and Sciences, 7 (2). pp. 149-171. ISSN 1526-1492

Epaarachchi, Jayantha A. and Clausen, Philip D. (2005) A new cumulative fatigue damage model for glass fibre reinforced plastic composites under step/discrete loading. Composites Part A: Applied Science and Manufacturing, 36 (9). pp. 1236-1245. ISSN 1359-835X

Li, Yan and Wen, Peng (2005) An ensemble learning algorithm for blind signal separation problem. In: 2005 International Conference on Computational Intelligence for Modelling, Control and Automation (CIMCA 2005), 28- 30 Nov 2005, Vienna, Austria .

Shi, Chenggen and Lu, Jie and Zhang, Guangquan and Zhou, Hong (2005) An extended Kuhn-Tucker approach for linear bilevel multifollower programming with partial shared variables among followers. In: IEEE International Conference on Systems, Man and Cybernetics (SMC), 12 Oct 2005, Hawaii,USA.

Wells, Colin G. (2005) Analysis of shielded rectangular dielectric rod waveguide using mode matching. [Thesis (_PhD/Research)] (Unpublished)

Ku, Harry S. and Siores, Elias and Ball, James A. R. (2005) Application of variable frequency microwave (VFM) to adhesives. Journal of Electromagnetic Waves and Applications, 19 (11). pp. 1467-1484. ISSN 0920-5071

Li, Yan and Wen, Peng (2005) Bayesian model for brain computation. In: 2005 International Conference on Complex Medical Engineering (CME 2005), 15-18 May 2005, Takamatsu, Japan.

Coons, J. E. and Halley, P. J. and McGlashan, S. A. and Tran-Cong, T. (2005) Bounding film drainage in common thin films. Colloids and Surfaces A: Physicochemical Engineering Aspects, 263 (1-3). pp. 197-204. ISSN 0927-7757

Galvin, Geordie (2005) Comparison of on-pond measurement and back calculation of odour emission rates from anaerobic piggery lagoons. [Thesis (_PhD/Research)] (Unpublished)

Ku, Harry S. (2005) Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation. Journal of Reinforced Plastics and Composites, 24 (10). pp. 1035-1049. ISSN 0731-6844

Craig, Ian and Green, Andrew and Scobie, Michael and Schmidt, Erik (2005) Controlling evaporation loss from water storages. Technical Report. University of Southern Queensland, National Centre for Engineering in Agriculture , Toowoomba, Australia.

Frost, Benjamin and Cubero, Samuel Nacion (2005) Development of a 3D laser scanner for guiding a six-legged walking robot. In: 12th Annual Conference on Mechatronics and Machine Vision in Practice , 29 Nov - 1 Dec 2005, Manila, Philippines.

Baker, Anthony John and Young, Frank R. (2005) Digital mapping data currency through sharing: a practical study. In: 2005 Spatial Sciences Institute Biennial Conference: Spatial Intelligence, Innovation and Praxis (SSC2005), 12-16 Sep 2005, Melbourne, Australia.

Young, Frank R. (2005) Education pedagogy for spatial science praxis. In: 2005 Spatial Sciences Institute Biennial Conference: Spatial Intelligence, Innovation and Praxis (SSC2005), 12-16 Sep 2005, Melbourne, Australia.

Wen, Peng and Kidd, Jason G. (2005) Electronic height indicatior for agricultural machines. Australian Journal of Electrical and Electronics Engineering, 2 (1). pp. 13-20. ISSN 1448-837X

Wen, Peng and Kidd, Jason G. (2005) Electronic height indicator for agricultural machines. Australian Journal of Electrical and Electronics Engineering, 2 (1). pp. 13-20. ISSN 1448-837X

Xiang, Wei and Leis, John W. (2005) EXIT chart analysis of iteratively decodable source codes for wireless multimedia communications. In: DSPCS/WITSP 2005: 4th Workshop on the Internet, Telecommunications and Signal Processing (WITSP2005), 19-21 Dec 2005, Noosa, Australia.

Ku, Harry S. and Baddeley, Douglas and Snook, Chris and Chew, C. S. (2005) Fracture toughness of vinyl ester composites cured by microwave irradiation: preliminary results. Journal of Reinforced Plastics and Composites, 24 (11). pp. 1181-1202. ISSN 0731-6844

Jensen, T. and Apan, A. and Young, F. and Zeller, L. (2005) Grain crop attributes detected using digital imagery acquired from a low-altitude helium balloon. In: 5th European Conference on Precision Agriculture, 9-12 June 2005, Uppsala, Sweden.

Fletcher, Duncan and Wilson, Shaun and Jokic, Michael D. and Vuletich, Ivan (2005) Guided weapon template generation: a probabilistic approach. In: 2005 Systems Engineering/Test and Evaluation Conference (SETE 2005), 7-9 Nov 2005, Brisbane, Qld.

Gibbings, Peter and Ong Kim Sun, G. (2005) How well does the virtual reference stations (VERS) system of GPS base stations perform in comparison to conventional RTL? Journal of Spatial Science, 50 (1). pp. 59-73. ISSN 1449-8596

Liu, Xiaoye and Peterson, Jim and Zhang, Zhenyu and Chandra, Shobhit (2005) Improving soil salinity prediction with high resolution DEM derived from LiDAR data. In: 9th International Symposium on Physical Measurements and Signatures in Remote Sensing (ISPMSRS 2005), 17-19 Oct 2005, Beijing, China.

Aravinthan, T. and Heldt, T. (2005) Innovative strengthening technique using prestressed fibre wraps for bridge headstocks. In: ASEC 2005: 6th Australian Structural Engineering Conference Structural engineering : preserving and building into the future , 11-14 Sep 2005, Newcastle, Australia.

Chen, Guangnan and Orphant, Simon and Kenman, Sarah J. and Chataway, Robert G. (2005) Life cycle assessment of a representative dairy farm with limited irrigation pastures. In: 4th Australian Conference on Life Cycle Assessment, 23-25 Feb 2005, Sydney, Australia.

Craig, Ian P. (2005) Loss of storage water due to evaporation - a literature review. Technical Report. University of Southern Queensland, National Centre for Engineering in Agriculture , Toowoomba, Australia.

Douglas, Adrian Keith (2005) Mechanical design aspects of a lightweight neonatal retrieval system. [Thesis (_PhD/Research)] (Unpublished)

Billingsley, John, ed. (2005) Mechatronics and machine vision 2005. Robotics and Mechatronics . Research Studies Press, Hertfordshire, England. ISBN 9781604236149

Lee, Richard Anthony (2005) Micrographs of the fracture of vinyl ester composites cured by microwaves. [USQ Project] (Unpublished)

Chew, C. S. and Ku, Harry S. and Baddeley, Douglas and Snook, Chris (2005) Micrographs of the fracture of vinyl ester composites cured by microwaves: pilot study. Journal of Electromagnetic Waves and Applications, 19 (1). pp. 67-82. ISSN 0920-5071

Yao, Xiangdong and Wang, Hao and He, B. and Zhou, X. (2005) Modeling of columnar-to-equiaxed transition in solidified Al-Si alloys. In: 5th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 5), 2-5 Nov 2004, Beijing, China.

Springolo, Mario (2005) New fibre-reinforced polymer box beam: investigation of static behaviour. [Thesis (_PhD/Research)] (Unpublished)

Chen, G. and Baker, Graham (2005) One-dimensional nonlinear model for prediction of crack spacing in concrete pavements. Advances in Structural Engineering, 8 (6). pp. 595-602. ISSN 1369-4332

Suryasaputra, Robert and Kist, Alexander A. and Harris, Richard J. (2005) OptiFlow - a capacity management tool. In: IEEE Tencon (IEEE Region 10 Conference), 21-24 Nov 2005, Melbourne, Australia.

Khennane, Amar (2005) Performance design of reinforced concrete slabs using commercial finite element software. Structural Concrete, 6 (4). pp. 141-147. ISSN 1464-4177

Liang, Qing Quan (2005) Performance-based optimization of structures: theory and applications. Spon Research . Taylor & Francis (Spon Press), London and New York. ISBN 0-415-33594-9

Ziri-Castro, Karla I. and Scanlon, William G. and Evans, Noel E. (2005) Prediction of variation in MIMO channel capacity for the populated indoor environment using a radar cross-section-based pedestrian model. IEEE Transactions on Wireless Communications, 4 (3). pp. 1186-1194. ISSN 1536-1276

McCarthy, Elizabeth and Wen, Peng (2005) Preliminary investigation of the digital human head. In: 2005 International Conference on Complex Medical Engineering (CME 2005), 15-18 May 2005, Takamatsu, Japan.

Sohn, Jae Ho (2005) Process studies of odour emissions from effluent ponds using machine-based odour measurement. [Thesis (_PhD/Research)] (Unpublished)

Misra, R. K. and Fuentes, S. and Raine, Steven R. (2005) Recent developments and strategies in the use of plant indicators for irrigation scheduling. In: Irrigation Australia 2005: Irrigation Association of Australia National Conference and Exhibition: Restoring the Balance, 17-19 May 2005, Townsville, Australia.

Sharma, Ronald (2005) Removal of DC offset current from transformerless PV inverters connected to utility. In: 40th International Universities Power Engineering Conference (UPEC 2005), 7-9 Sept 2005, Cork, Ireland.

Brodie, Lyn and Porter, Mark (2005) Responding to changing demands in engineering education: PBL for distance and on-campus students. Engineering Education . ISSN 1750-0044

De Costa, Gregory Shahane and Kojiri, Toshiharu and Porter, Mark (2005) Salinity intrusion: its characteristics and impact - cases in the Asia Pacific region. In: 4th International Symposium on Environmental Hydraulics, 15-18 Dec 2004, Hong Kong.

Coons, J. E. and Halley, P. J. and McGlashan, S. A. and Tran-Cong, T. (2005) Scaling laws for the critical rupture thickness of common thin films. Colloids and Surfaces A: Physicochemical Engineering Aspects, 263 (1-3). pp. 258-266. ISSN 0927-7757

Zhuge, Y. and Chuang, S. W. (2005) Seismic retrofitting of unreinforced masonry buildings - a literature review. Australian Journal of Structural Engineering, 6 (1). pp. 25-36. ISSN 1328-7982

Wang, Hao (2005) Semisolid structure formation and semisolid casting. Journal of Materials Science and Technology, 21 (s1). pp. 65-71. ISSN 1005-0302

Golshani, Aliakbar and Okui, Yoshiaki and Oda, Masanobu and Suzuki, Kenichiro (2005) Simulation of damage around a circular opening in rock. In: 11th International Conference of IACMAG, 19-24 June, 2005, Turin, Italy.

Ng, K. C. and Yusoff, M. Z. and Yusaf, T. F. (2005) Simulations of two-dimensional high speed turbulent compressible flow in a diffuser and a nozzle blade cascade. American Journal of Applied Sciences, 2 (9). pp. 1325-1330. ISSN 1546-9239

Young, Frank R. (2005) Spatial science education praxis benefits employees and employers. In: Australian Institute of Mine Surveyors 23rd Annual Seminar, 17-19 August 2005, Yeppoon, Australia.

Liang, Qing Quan and Uy, Brian and Bradford, Mark A. and Ronagh, Hamid R. (2005) Strength analysis of steel-concrete composite beams in combined bending and shear. Journal of Structural Engineering, 131 (10). pp. 1593-1600. ISSN 0733-9445

Karunasena, W. and Anderson, W. C. (2005) Strength and ductility prediction of concrete beams reinforced with internal steel and external composite materials. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005), 16-18 February 2005, Melbourne, Australia.

Hewitt, Andrew (2005) The effects of curvature on axial flux machine cores. [Thesis (_PhD/Research)] (Unpublished)

Wilcox, Colin and McDougall, Kevin (2005) The private surveyor as a spatial data custodian in the local community. In: 2005 Spatial Sciences Institute Biennial Conference: Spatial Intelligence, Innovation and Praxis (SSC2005), 12-16 Sep 2005, Melbourne, Australia.

Bullen, Frank and Knight, Daniel (2005) The role of the first year engineering experience (FYEE) course. World Transactions on Engineering and Technology Education, 4 (2). pp. 219-223. ISSN 1446-2257

McDougall, Kevin (2005) The survey mark infrastructure: is it doing the job? In: 2005 Spatial Sciences Institute Biennial Conference: Spatial Intelligence, Innovation and Praxis (SSC2005), 12-16 Sep 2005, Melbourne, Australia.

Sharifian, Ahmad and Buttsworth, David R. (2005) Thermal effects on fibre optic pressure sensor during free piston compression experiments. In: 8th International Symposium on Fluid Control, Measurement and Visualization (8th FLUCOME), 22-25 Aug 2005, Chengdu, China. (Unpublished)

McDougall, Kevin and Rajabifard, Abbas and Williamson, Ian (2005) Understanding the motivations and capacity for SDI development from the local level. In: 8th International Conference on Global Spatial Data Infrastructure: From Pharaohs to Geoinformatics (GDSI 8) , 16-21 Apr 2005, Cairo, Egypt.

Billingsley, John and Dunn, Mark (2005) Unusual vision - machine vision applications at the NCEA. Sensor Review, 25 (3). pp. 202-208. ISSN 0260-2288

Suryasaputra, Robert and Kist, Alexander A. and Harris, Richard J. (2005) Verification of MPLS traffic engineering techniques. In: 13th IEEE International Conference on Networks (ICON 2005), 16-18 Nov 2005, Kuala Lumpur.

McDougall, Kevin and Rajabifard, Abbas and Williamson, Ian (2005) What will motivate local governments to share spatial information? In: 2005 Spatial Sciences Institute Biennial Conference: Spatial Intelligence, Innovation and Praxis (SSC2005), 12-16 Sep 2005, Melbourne, Australia.

Jensen, T. and Zeller, L. and Fox, G. and Town, W. and Kelly, R. (2005) Real-time protein monitoring - Australian experiences. In: 5th European Conference on Precision Agriculture, 9-12 June 2005, Uppsala, Sweden.

2004

Elvy, Michelle Catherine (2004) Development of infiltration factors for the estimation of urban separate wastewater flow in the Gippsland water catchment. [USQ Project] (Unpublished)

Chen, G. and Baker, Graham (2004) Energy profile and bifurcation analysis in softening plasticity. Advances in Structural Engineering, 7 (6). pp. 515-523. ISSN 1369-4332

Dai, Shao-Cong and Yan, Wenyi and Liu, Hong-Yuan and Mai, Yiu-Wing (2004) Experimental study on z-pin bridging law by pullout test. Composites Science and Technology, 64 (16). pp. 2451-2457. ISSN 0266-3538

Gibson, John Martin (2004) Mapping of an old mine site for heritage purposes. [USQ Project] (Unpublished)

Chong, Albert K.-F. (2004) Optimising the accuracy of a low-cost photogrammetric motion study team. Photogrammetric Record, 19 (108). pp. 296-310. ISSN 0031-868X

Ku, Harry S. and Siores, Elias (2004) Shrinkage reduction of thermoset matrix particle reinforced composites during curing using microwaves irradiation. Transactions, Hong Kong Institution of Engineers, 11 (3). pp. 29-34. ISSN 1023-697X

Jokic, Michael D. and Longuski, James M. (2004) Design of tether sling for human transportation systems between Earth and Mars. Journal of Spacecraft and Rockets, 41 (6). 1010-1015 . ISSN 0022-4650

Ngo, Nelson, Shing Chai (2004) High-strength structural concrete with recycled aggregates. [USQ Project] (Unpublished)

Young, Paul Edward (2004) Project management : a guide from start to finish for BHPBilliton Iron Ore Engineering Services Dept. Port Hedland. [USQ Project] (Unpublished)

Cheong, Siew Hong (2004) Role of a project manager in a residential development housing development in Singapore - Analyse the use of bar code in tracking drawing during the construction of a residential development in Singapore. [USQ Project] (Unpublished)

Wong, Chuan Mein (2004) Use of short fibres in structural concrete to enhance mechanical properties. [USQ Project] (Unpublished)

Silva, Alan Grant Lance (2004) The development of a new multi-directional fall arrest device. [USQ Project] (Unpublished)

Mai-Duy, Nam and Tran-Cong, Thanh (2004) An effective RBFN-boundary integral approach for the analysis of natural convection flow. International Journal for Numerical Methods in Fluids, 46 (5). pp. 545-568. ISSN 0271-2091

Mauger, Travis William (2004) Selection of an engine and design of the fuelling system for a Formula SAE car. [USQ Project] (Unpublished)

Vriesema, Timothy Ross (2004) 'Online learning environment' using ASP.NET. [USQ Project] (Unpublished)

Knox, Donna (2004) 3D terrain visualisation and virtual fly-through for tourism conservation using Geographic Information Systems (GIS). [USQ Project] (Unpublished)

Bernardel, George (2004) A MATLAB-based framework for engineering design evaluation via virtual prototyping. [USQ Project] (Unpublished)

Lau, Chau Chin (2004) A study on concrete faced rockfill dams. [USQ Project] (Unpublished)

Stephens, James Finlay (2004) Accuracy evaluation of 3-D laser imaging scans. [USQ Project] (Unpublished)

McCarthy, Cheryl (2004) Advance rate measurement for furrow irrigation. [USQ Project] (Unpublished)

Coppen, John (2004) Advanced wastewater treatment systems. [USQ Project] (Unpublished)

Clarke, Timothy Lewis (2004) An autonomous bird deterrent system. [USQ Project] (Unpublished)

Cheah, Siew Lee (2004) Analysis of engine performance using palm oil methyl ester. [USQ Project] (Unpublished)

Taylor, Brett C. (2004) Assessment of appropriate pressure vessel flange bolt tension by finite element modelling. [USQ Project] (Unpublished)

Darr, Shawn Geoffrey (2004) Assessment of crop health in relation to competition from weeds: using balloon-borne images and pectrometer data. [USQ Project] (Unpublished)

Lee, Ven Han (2004) Co-firing of rice husk for electricity generation in Malaysia. [USQ Project] (Unpublished)

Beasley, K.-J. (2004) Design and implementation of a network address translator. [USQ Project] (Unpublished)

Heng, Hern (2004) Design of structural glass fitting for seismic condition. [USQ Project] (Unpublished)

Clerke, Adam (2004) Determination of mean high water mark within New South Wales. [USQ Project] (Unpublished)

Little, Jeremy (2004) Development of the drivetrain including brakes and wheels for the Formula SAE-A vehicle. [USQ Project] (Unpublished)

Cheong, Fong Chin (2004) Effect of admixtures on the use of short fibres in structural concrete to enhance mechanical properties. [USQ Project] (Unpublished)

Alam, Murshedul (2004) Effect of epoxy repairing on girders shear strengthened with external post tensioning. [USQ Project] (Unpublished)

McKeering, Loretta M. (2004) Evaluating the potential to impose partial root zone drying (PRD) on clay soils in commercial cotton production systems. [USQ Project] (Unpublished)

Ang, Soh Fong (2004) Evaluation impact strength on particulate reinforced (25% and 33%) vinyl ester composite cured under microwave conditions. [USQ Project] (Unpublished)

Mackenzie, Christopher Frank (2004) Evaluation of funding justification of low volume roads in North Queensland. [USQ Project] (Unpublished)

Hockings, Peter (2004) Fast-response piezoresistive pressure transducers for thermofluids experiments. [USQ Project] (Unpublished)

Baker, Christopher Scott (2004) FoES Formula SAE-A space frame chassis design. [USQ Project] (Unpublished)

Smith, Richard Boyd (2004) Forensic investigation of pavement failures. [USQ Project] (Unpublished)

Armstrong, John (2004) Formula SAE: design overview and project management. [USQ Project] (Unpublished)

Tsang, Shing Hin (2004) Fracture analysis of vinyl ester composites under microwave condition. [USQ Project] (Unpublished)

Wells, Colin G. and Ball, James A. R. (2004) Gap capacitance of a coaxial resonator using simplified mode matching. IEE Proceedings : Microwaves, Antennas and Propagation, 151 (5). pp. 399-403. ISSN 1350-2417

Masters, Jason Scott (2004) GIS based cadastral planning. [USQ Project] (Unpublished)

Roache, Brody (2004) Heat transfer measurements of a re-entry capsule using fast response thermocouples. [USQ Project] (Unpublished)

Barney, Debra Kaye (2004) Identification mapping and evaluation of timber bridges in the Wide Bay District. [USQ Project] (Unpublished)

Gray, David Thomas Chalmer (2004) Impact of demand-side management on substations. [USQ Project] (Unpublished)

Loh, Chew Ping (2004) Implementation of JPEG-2000 standard for the next generation image compression. [USQ Project] (Unpublished)

Davidson, Timothy (2004) Improving the aerodynamic force measurement system for the USQ gun tunnel. [USQ Project] (Unpublished)

Jensen, Jason W. (2004) Influence of physical road characteristics on road crashes. [USQ Project] (Unpublished)

Toh, Pei Ling (2004) Interactive web-based signal processing tutor. [USQ Project] (Unpublished)

Pinkham, Daniel (2004) Investigation into the placement and connection of permanent survey marks for cadastral surveys. [USQ Project] (Unpublished)

Li, David (2004) Investigation of driver fatigue problems on the Oakey-Cooyar road. [USQ Project] (Unpublished)

Peh, Wee Liang (2004) Investigation of TCP performance over wireless internet. [USQ Project] (Unpublished)

Supurmaniam, Adrian (2004) Life cycle assessment in electronics. [USQ Project] (Unpublished)

Orphant, Simon (2004) Life cycle assessment of the production of raw milk. [USQ Project] (Unpublished)

Underhill, Richard (2004) Life cycle maintenance of low volume roads in the Alice Springs region. [USQ Project] (Unpublished)

Apan, Armando and Young, Frank R. and Phinn, Stuart and Held, Alex and Favier, Jason (2004) Mapping olive varieties and within-field spatial variability using high resolution QuickBird imagery. In: 12th Australasian Remote Sensing and Photogrammetry Conference, 18-22 Oct 2004, Fremantle, Australia.

Almenhali, Salem (2004) Mapping the distribution of general practitioners and their billing pattern in the Toowoomba District. [USQ Project] (Unpublished)

Tan, Kok Wei (2004) Motorcycle safety in Malaysia. [USQ Project] (Unpublished)

Stansbie, Clayton Harley (2004) Natural gas burner for copper smelter converter. [USQ Project] (Unpublished)

Faulkner, Griffith (2004) Numerical investigation into the aeration of grain silos. [USQ Project] (Unpublished)

Lee, Andrew (2004) Numerical investigation of the temperature distribution in an industrial oven. [USQ Project] (Unpublished)

Wright, Shayne (2004) Open area test site (OATS) development. [USQ Project] (Unpublished)

Robertson, Jamie Andrew (2004) Optimising the operations of the Kanaka Drain floodgate. [USQ Project] (Unpublished)

Heinrich, Nathan (2004) Prediction of feedlot effluent pond odour emission after significant inflow. [USQ Project] (Unpublished)

Yew, Yip Soon (2004) Production flow analysis & inventory control for Orford Refrigeration. [USQ Project] (Unpublished)

Ruhle, Andrew John Alexander (2004) Redesign and analysis of Janke Bros. F500P parallelogram planting unit. [USQ Project] (Unpublished)

Goh, Yaw Siong Oliver (2004) Reduction of noise transmission in The Adephi, Singapore. [USQ Project] (Unpublished)

Oliver, Anthony James (2004) Relevance of identification surveys in N.S.W. conveyancing. [USQ Project] (Unpublished)

Hetherington, Nathan John (2004) Remote access of automated test equipment. [USQ Project] (Unpublished)

Yap, Fui It (2004) Review of the current timber industry in Malaysia. [USQ Project] (Unpublished)

MacGregor, Cameron Scott (2004) Risk mapping in the Condamine River catchment basin. [USQ Project] (Unpublished)

Jong, Hua Kwan (2004) Safety management system. [USQ Project] (Unpublished)

Choo, Yeun Feong (2004) Seismic stability of slope. [USQ Project] (Unpublished)

Woods, Evan Arthur (2004) Shear strengthening and model testing of concrete bridge headstocks. [USQ Project] (Unpublished)

Jobling, Lindsay Peter (2004) Shear strengthening of headstocks using prestressed fibre strips. [USQ Project] (Unpublished)

Ng, Chan Man (2004) Site formation works for Shek Mun development. [USQ Project] (Unpublished)

Warne, Daniel (2004) Software radio architectures - part 2. [USQ Project] (Unpublished)

Lusk, Benjamin Geoffrey (2004) Soil amendments to improve playability and reduce injury risks on sporting fields. [USQ Project] (Unpublished)

Rayner, Leslie (2004) Steering design for a formula SAE-A open wheel race car. [USQ Project] (Unpublished)

Chua, Chun Siong (2004) Testing of robotic total stations for dynamic tracking. [USQ Project] (Unpublished)

Rasphone, Akchousanh (2004) The analysis of Neighbourhood Watch structure using Geographic Information System (GIS). [USQ Project] (Unpublished)

Nelder, Ken (2004) The bodywork package for the USQ's Formula-SAE racer. [USQ Project] (Unpublished)

Delisser, Anthony Ellis (2004) The development and implementation of a knowledge management system for the NDCG access line of business. [USQ Project] (Unpublished)

Krinke, Mark James (2004) The effect of admixtures in concrete containing manufactured sand. [USQ Project] (Unpublished)

Lim, Pei Li (2004) The effect of compression ratio on the CNG-diesel engine. [USQ Project] (Unpublished)

Zeimer, Ashley Karl (2004) The effect of DC current on power transformers. [USQ Project] (Unpublished)

Goodger, Anthony Maldon (2004) The formation of nitrogen oxides in a pulverised coal boiler. [USQ Project] (Unpublished)

Wilcox, Colin Gordon (2004) The private surveyor as a spatial data custodian in the local community. [USQ Project] (Unpublished)

Fraser, Timothy (2004) The use of industry by-products in the treatment of acid sulfate soils. [USQ Project] (Unpublished)

Sercombe, David B. (2004) Transverse injection from a hypersonic cone. [USQ Project] (Unpublished)

Piper, A. G. (2004) Turf monitoring technology to aid in benchmarking and maintenance of sporting fields. [USQ Project] (Unpublished)

Gitau, Samuel Kimani (2004) Use of road asset maintenance planning software in QDMR. [USQ Project] (Unpublished)

Loh, Shiau Ping (2004) Watermarking for securing digital media content. [USQ Project] (Unpublished)

McDonald, Adam John (2004) Which geoid model should be used for GPS heighting on the Toowoomba bypass project? [USQ Project] (Unpublished)

Sim, Lee Kheng Shirley (2004) XML based online traffic information. [USQ Project] (Unpublished)

Sohn, Jae Ho and Smith, Rod and Yoong, Ernest and Hudson, Neale A. and Kim, Tae I. (2004) An evaluation of a novel wind tunnel design applied to the measurement of the kinetics of odour emissions from piggery effluent. Water Science and Technology, 50 (4). pp. 49-55. ISSN 0273-1223

Young, Frank R. and Apan, Armando and Chandler, Owen (2004) Crop hail damage: insurance loss assessment using remote sensing. In: Annual Conference of the Remote Sensing and Photogrammetry Society, 7-10 Sept 2004, Aberdeen, UK.

Thorpe, David (2004) Development and implementation of a postgraduate technology management program. In: AaeE 2004: Creating Flexible Learning Environments, 27-29 Sep 2004, Toowoomba, Australia.

Fulcher, Robert (2004) Teaching engineering management in a flexible learning environment. In: AaeE 2004: Creating Flexible Learning Environments, 27-29 Sept 2004 , Toowoomba, Australia.

Ku, Harry S. and Widjaya, Budiman and Lee, Kin Fung and Li, Chun Wai (2004) Thermal analysis comparison between three random glass fibre-reinforced thermoplastic matrix composites bonded by adhesives using microwaves. Journal of Reinforced Plastics and Composites, 23 (3). 1443-1460. ISSN 0731-6844

Brodie, Ian and Porter, Mark (2004) Use of passive stormwater samplers in water sensitive urban design. In: WSUD 2004 International Conference on Water Sensitive Urban Design: Cities As Catchments, 21-25 Nov 2004, Adelaide, South Australia.

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2004) Constitutive model for confined high strength concretes subjected to cyclic loading. Journal of materials in Civil Engineering, 16 (4). pp. 297-305. ISSN 0899-1561

Xiang, Wei and Fok, Sai Cheong and Thimm, Georg (2004) Agent-based composable simulation for virtual prototyping of fluid power system. Computers in Industry, 54 (3). pp. 237-251. ISSN 0166-3615

Chong, Albert K.-F. (2004) A case study on the establishment of shoreline position. Survey Review, 37 (293). pp. 542-551. ISSN 0039-6265

Mai-Duy, N. and Tran-Cong, T. (2004) Boundary integral-based domain decomposition technique for solution of Navier Stokes equations. CMES: Computer Modeling in Engineering and Sciences, 6 (1). pp. 59-75. ISSN 1526-1492

Buttsworth, David R. and Jones, Terry V. (2004) Transient temperature probe measurements in a Mach 4 nitrogen jet. Experiments in Fluids, 37 (1). pp. 137-145. ISSN 0723-4864

Kist, Alexander A. and Harris, Richard J. (2004) Cost efficient overflow routing for outbound ISP traffic. In: 9th IEEE Symposium on Computers and Communications (ISCC 2004), 28 Jun - 1 July 2004, Alexandria, Egypt.

Vacher, Cameron A. and Loch, Rob and Raine, Steven R. (2004) Identification and management of dispersive mine spoils. Technical Report. Australian Centre for Mining Environmental Research, Kenmore, Australia.

Dowling, David (2004) Studying engineering by distance education: an Australian case study. In: Engineering Education 2004 (EE2004), 07-09 Jun 2004, Wolverhampton, United Kingdom. (Submitted)

Craig, Ian (2004) The GDS model - a rapid computational technique for the calculation of aircraft spray drift buffer distances. Computers and Electronics in Agriculture, 43 (3). pp. 235-250. ISSN 0168-1699

Chong, Albert K.-F. and Majid, Zulkepli and Ahmad, Anuar B. and Setan, Halim and Samsudin, Abdul B. Rani (2004) The use of a national craniofacial database. New Zealand Surveyor (294). pp. 15-18. ISSN 0048-0150

Emdad, Mohammad R. and Raine, Steven R. and Smith, Rod J. and Fardad, Hossein (2004) Effect of water quality on soil structure and infiltration under furrow irrigation. Irrigation Science, 23 (2). pp. 55-60. ISSN 0342-7188

Craig, Ian and Hancock, Nigel (2004) Methods for assessing dam evaporation - an introductory paper. In: Irrigation Australia 2004: Irrigation Association of Australia National Conference and Exhibition, 11-13 May 2004, Adelaide, Australia.

Elawad, Mohamed and Yusaf, Talal (2004) Performance and exhaust emission of a diesel engine using crude palm oil as a fuel extender. Journal of Energy & Environment , 3 . pp. 61-68. ISSN 1563-1362

Chen, G. and Baker, Graham (2004) Analysis of crack spacing in reinforced concrete by a lattice model. Advances in Structural Engineering, 7 (2). pp. 179-188. ISSN 1369-4332

Wang, Hao and Davidson, C. J. and StJohn, David H. (2004) Semisolid microstructural evolution of AlSi7Mg during partial remelting. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing , 368 (1-2). pp. 159-167. ISSN 0921-5093

Leis, John W. (2004) Enhancing the performance of vector quantizers for data compression and pattern matching using sorted codebooks. Technical Report. University of Southern Queensland, Faculty of Engineering and Surveying, Toowoomba, Australia.

Tran, Canh-Dung and Tran-Cong, Thanh (2004) Element-free simulation of dilute polymeric flows using Brownian configuration fields. Korea-Australia Rheology Journal, 16 (1). pp. 1-15. ISSN 1226-119X

Raine, Steven R. and Eberhard, Jochen (2004) Characterisation of soil profiles on four AFLQ Premier League sporting fields. Technical Report. University of Southern Queensland, National Centre for Engineering in Agriculture, Toowoomba, Australia.

Ayers, Stephen R. and van Erp, Gerard (2004) A Code of Practice for the structural design of fibre composites. Proceedings of the Institution of Civil Engineers, Structures & Buildings, 157 (1). pp. 3-8. ISSN 1751-7702

Apan, Armando and Held, Alex and Phinn, Stuart and Markley, John (2004) Detecting sugarcane 'orange rust' disease using EO-1 Hyperion hyperspectral imagery. International Journal of Remote Sensing, 25 (2). pp. 489-498. ISSN 0143-1161

Islam, Md Mainul and Ali, Md Nawsher and Mia, Sobahan (2004) Evaluation of the properties of raw materials and products of briquetting machine. In: 2nd BSME-ASME International Conference on Thermal Engineering, 2-4 Jan 2004, Dhaka, Bangladesh.

Chen, G. and Baker, Graham (2004) Incompatible 3-node interpolation for gradient-dependent plasticity. Structural Engineering and Mechanics , 17 (1). pp. 87-97. ISSN 1225-4568

Zhuge, Yan and Jin, Feng and Hunt, Suzanne P. (2004) The prediction of damage to masonry houses caused by foundation movements. Advances in Structural Engineering, 7 (1). pp. 81-93. ISSN 1369-4332

Gupta, Madan and George, Doug and Basnet, Badri Bahadur (2004) A computerised key for seed identification. In: 27th International Seed Testing Association Congress (ISTA 2004), 13-24 May 2004, Budapest, Hungary.

Davey, Scott W. (2004) A foundational investigation of vinyl ester / cenosphere composite materials for civil and structural engineering. [Thesis (_PhD/Research)] (Unpublished)

Cubero, Samuel Nacion (2004) A general purpose inverse kinematics algorithm for all manipulators. In: 11th Annual Conference on Mechatronics and Machine Vision in Practice, 28 Nov - 3 Dec 2004 , Macau, China. (In Press)

Epaarachchi, Jayantha A. and Clausen, Philip D. (2004) Accelerated full scale fatigue testing of a small composite wind turbine blade using a mechanically operated test rig. In: 2004 Structural Integrity and Fracture International Conference (SIF2004), 26-29 Sept 2004, Brisbane, Australia.

Wang, Hao and Zou, Jin and Zhang, M. X., eds. (2004) Advanced materials science and engineering: 2004 Australia-China Materials Science Symposium, 22nd-25th October 2004, Brisbane, Australia: [special theme issue of] Journal of Materials Science & Technology, Vol. 20, Suppl. 1, 2004. Zhongguo Kexueyuan, Jinshu Yanjiusuo, China. ISBN 1005-0302

Jokic, Michael D. and Daniel, W. J. T. (2004) Aerogravity assist maneuvering of a tethered satellite system. Journal of Spacecraft and Rockets, 41 (4). pp. 614-621. ISSN 0022-4650

Mai-Duy, Nam and Tanner, R. I. (2004) An efficient BEM for numerical solution of the biharmonic boundary value problem. In: 2004 International Conference on Computational and Experimental Engineering & Sciences: Advances in Computational & Experimental Engineering & Sciences , 26-29 July 2004, Madeira, Portugal.

Wen, Peng and Li, Yan (2004) An internet based supervision control and data acquisition system with fault tolerance. In: 2004 International Conference on Computational Intelligence for Modelling, Control and Automation (CIMCA 2004), 12-14 July 2004, Gold Coast, Australia.

Aravinthan, Thiru and Sabonchy, Erdal and Heldt, Tim (2004) Application of external post-tensioning for strengthening of headstocks (bent-caps) in bridges. In: CONSEC'04: Environment and Loading , 27-30 Jun 2004, Seoul, South Korea.

Chandler, Owen and Young, Frank R. and Apan, Armando (2004) Assessment of hail damage to crops using satellite imagery and hand held hyperspectral data. In: 12th Australasian Remote Sensing and Photogrammetry Conference, 18-22 Oct 2004, Freemantle, Australia.

Foley, Joseph P. (2004) Centre pivot and lateral move machines. In: Dugdale, Helen and Harris, Graham and Neilsen, James and Richards, Dirk and Roth, Guy and Williams, David, (eds.) WATERpak - A guide for irrigation management in cotton. Cotton Research and Development Corporation, Narrabri, NSW, Australia, pp. 195-220. ISBN 1876354968

Bel, Patricia Damian (2004) Cotton quality - fibre to fabric: fibre properties relationships to fabric quality. [Thesis (_PhD/Research)] (Unpublished)

Bullen, Frank and Sargison, Jane E. and McCulloch, John W. (2004) Developing multi-discipline design skills in undergraduates. In: 2004 American Society for Engineering Education Annual Conference & Exposition: Engineering Education Reaches New Heights (ASEE 2004), 20-23 Jun 2004, Salt Lake City, Utah.

Dowling, David and Taylor, Robert (2004) Distance education for New Zealand technician surveyors: a review of the options. In: 4th Trans Tasman Surveyors Conference, 13-16 Oct 2005, Auckland, New Zealand.

Sharma, Ronald and Ahfock, Tony L. (2004) Distortion in single phase current controlled PV inverters for grid connection. In: AUPEC 2004: Challenges and Opportunities in the Deregulated Power Industry, 26-29 Sep 2004, Brisbane, Australia.

Hughes, Warren and Karunasena, Warna (2004) Factors affecting debonding of FRP (fiber-reinforced polymer) rehabilitated concrete beams. In: 3rd International Conference on Advances in Structural Engineering and Mechanics (ASEM 2004), 2-4 Sept 2004, Seoul, South Korea.

Young, Frank R. (2004) Geospatial education to empower business quality. In: 2004 Spatial Sciences Institute Queensland Conference, 22-23 April 2004, Brisbane, Australia.

Kist, Alexander A. and Harris, Richard J. (2004) Guiding mice and elephants in an optical world. In: ATNAC 2004: Australian Telecommunications Networks and Applications Conference, 8-10 Dec 2004, Sydney, Australia.

Cheng, Y. M. and Ku, Harry S. and Snook, Chris and Baddeley, Douglas (2004) Impact strength of vinyl ester composites cured by microwave irradiation: preliminary results. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 218 (L4). pp. 307-320. ISSN 1464-4207

Mai-Duy, Nam (2004) Indirect RBFN method with scattered points for numerical solution of PDEs. CMES: Computer Modeling in Engineering and Sciences, 6 (2). pp. 209-226. ISSN 1526-1492

Ziri-Castro, Karla and Scanlon, William and Evans, Noel (2004) Indoor radio channel characterization and modeling for a 5.2-GHz bodyworn receiver. IEEE Antennas and Wireless Propagation Letters, 3 (1). pp. 219-222. ISSN 1536-1225

Ali, Md Nawsher and Islam, Md Mainul and Ferdous, Chy. Md Refaul (2004) Investigation for a suitable screw of a briquetting machine. In: 2nd BSME-ASME lnternational Conference on Thermal Engineering, 2-4 Jan 2004, Dhaka, Bangladesh.

Liang, Qing Quan and Uy, Brian and Wright, Howard D. and Bradford, Mark A. (2004) Local buckling of steel plates in double skin composite panels under biaxial compression and shear. Journal of Structural Engineering, 130 (3). pp. 443-451. ISSN 0733-9445

Sparshott, K. and Miyamoto, M. and Bhaskaran, Sunil (2004) Mapping vegetation response to fire by hyperspectral techniques at the Girraween National Park, Stanthorpe, Queensland. In: 12th Australasian Remote Sensing and Photogrammetry Conference (ARSPC 2004): To Measure is to Manage, 18-22 Oct 2004, Fremantle, Australia.

Ouyang, L. Z. and Wang, Hao and Zhu, M. and Zou, Jin and Chung, C. Y. (2004) Microstructure of MmM5/Mg multi-layer hydrogen storage films prepared by magnetron sputtering. Microscopy Research and Technique, 64 (4). pp. 323-329. ISSN 1059-910X

Yan, Wenyi and Lui, Hong-Yuan and Mai, Yiu-Wing (2004) Mode II delamination toughness of z-pinned laminates. Composites science and technology, 64 (13-14). pp. 1937-1945. ISSN 0266-3538

Mai-Duy, Nam and Tanner, R. I. (2004) Numerical analysis of corrugated tube flow using RBFNs. In: XIVth International Congress on Rheology, 22-27 Aug 2004, Seoul, Korea.

Karunasena, W. (2004) Numerical modelling of obliquely incident guided wave scattering by a crack in a laminated composite plate. In: 2004 Structural Integrity and Fracture International Conference (SIF2004), 26-29 Sept 2004, Brisbane, Australia.

Kist, Alexander A. and Harris, Richard J. (2004) QoS framework for SIP signalling. In: 2004 IASTED International Conference on Communications Systems and Applications (CSA 2004), 8-10 July 2004, Banff, Canada.

Li, Zhenquan and Zhang, Zhongwei and Zhou, Hong (2004) Quantitative analysis of queue management schemes in TCP/IP network routers. In: ATNAC 2004: Australian Telecommunications Networks and Applications Conference, 8-10 Dec 2004, Sydney, Australia.

Craig, Ian and Sohn, Jae Ho and Kim, Tae I. (2004) Recommended methods for the preconditioning of odourous air prior to treatment in organic biofilters. Technical Report. University of Southern Queensland, National Centre for Engineering in Agriculture , Toowoomba, Australia. (Unpublished)

Lloyd-Smith, Bill and Kist, Alexander A. and Shrestha, N. and Harris, Richard J. (2004) Shortest paths in stochastic networks. In: 12th IEEE International Conference on Networks (ICON 2004), 16-19 Nov 2004, Singapore.

Tran, Canh-Dung (2004) Simulating the flow of some non-Newtonian fluids with neural-like networks and stochastic processes. [Thesis (_PhD/Research)] (Unpublished)

Apan, Armando and Raine, Steven R. and Le Brocque, Andrew F. and Cockfield, Geoff (2004) Spatial prioritisation of revegetation sites for dryland salinity management: an analytical framework using GIS. Journal of Environmental Planning and Management, 47 (6). pp. 811-825. ISSN 0964-0568

Baillie, Craig Peter (2004) Strategies for maximising sugarcane yield with limited water in the Bundaberg district. [Thesis (_PhD/Research)] (Unpublished)

Huang, Da (2004) Structural behaviour of two-way fibre reinforced composite slabs. [Thesis (_PhD/Research)] (Unpublished)

Norman, Mark and Leis, John (2004) Student-accessible tools and techniques to aid in teaching network protocols. In: AaeE 2004: Creating Flexible Learning Environments, 27-29 Sep 2009, Toowoomba, Australia.

Wen, Peng and Li, Yan (2004) The real-time computing model for a network based control system. In: 8th International Conference on Control, Automation, Robotics and Vision (ICARCV 2004) , 6-9 Dec 2004, Kunming, China.

Galvin, Geordie and Lowe, Scott and Smith, Rod (2004) The validation of a simple Gaussian dispersion model for determining odour emission rates from area sources. Developments in Chemical Engineering and Mineral Processing, 12 (5/6). pp. 545-558. ISSN 0969-1855

Zhou, Hong and Leis, John W. and Hoang, Doan and Nhan, Phuong (2004) Throughput and fairness of multiple TCP connections in wireless networks. In: 3rd Workshop on the Internet, Telecommunications and Signal Processing (WITSP2004), 20-22 Dec 2004, Adelaide, South Australia.

Liang, Qing Quan and Uy, Brian and Bradford, Mark A. and Ronagh, Hamid R. (2004) Ultimate strength of continuous composite beams in combined bending and shear. Journal of Constructional Steel Research, 60 (8). pp. 1109-1128. ISSN 0143-974X

Wells, Natasha and Kelly, Rob and Phinn, Stuart and Apan, Armando and Jensen, Troy and Cooper, John and Strong, Wayne (2004) Use of airborne hyperspectral imagery to determine quality of sorghum crops. In: 12th Australasian Remote Sensing and Photogrammetry Conference, 18-22 Oct 2004, Fremantle, Western Australia.

Young, Frank R. (2004) Which qualification: which model. Spatial Science Queensland, 2004 (4). pp. 38-41. ISSN 1032-3848

2003

Dunn, Mark and Billingsley, John and Finch, Neal (2003) Machine vision classification of animals. In: 10th Annual Conference on Mechatronics and Machine Vision in Practice, 09-11 Dec 2003, Perth, Australia.

Ziri-Castro, Karla and Scanlon, William and Evans, Noel (2003) Measured pedestrian movement and bodyworn terminal effects for the indoor channel at 5.2 GHz. European Transactions on Telecommunications, 14 (6). pp. 529-538. ISSN 1124-318X

Johnson, K. and Lemcke, Pamela M. and Karunasena, W. and Sivakugan, Nagaratnam (2003) Modelling the response to deep foundations under oblique loading. In: MODSIM03: International Congress on Modelling and Simulation: Integrative Modelling of Biophysical, Social, and Economic Systems for Resource Management Solutions, 14-17 July 2003, Townsville, Australia.

Sohn, Jae Ho and Smith, Rod and Yoong, Ernest and Leis, John W. and Galvin, Geordie (2003) Quantification of odours from piggery effluent ponds using an electronic nose and an artificial neural network. Biosystems Engineering, 86 (4). pp. 399-410. ISSN 1537-5110

Kist, Alexander A. and Harris, Richard J. (2003) SIP Message Overflow Routing Scheme (SMORS). In: ATNAC 2003: Australian Telecommunications Networks and Applications Conference, 8-10 Dec 2003, Melbourne, Australia.

Yusaf, Talal and Al-Atabi, Mushtak and Buttsworth, David R. (2003) Small scale power generation using a dual fuel system. RERIC International Energy Journal, 4 (2). pp. 129-138. ISSN 0857-6173

Billingsley, John and Dunlop, Reg (2003) Teaching mechatronics principles using laboratory classes. In: 10th Annual Conference on Mechatronics and Machine Vision in Practice, 09-11 Dec 2003, Perth, Australia.

Ong, Clement and Billingsley, John (2003) The steering of trailed implements for tractor path tracking. In: 10th Annual Conference on Mechatronics and Machine Vision in Practice, 09-11 Dec 2003, Perth, Australia.

McIlvenna, Paul and Mossad, Ruth (2003) Two dimensional transfer chute analysis using a continuum method. In: 3rd International Conference on Computational Fluid Dynamics in the Minerals and Process Industries (CFD2003), 10-12 Dec 2003, Melbourne, Australia.

Kamel, Fouad (2003) Cost per kWh produced and payback time of a PV -solar -thermal -combined roof top collector at different locations in New Zealand. In: 41st Annual Conference of the Australian and New Zealand Solar Energy Society (Solar03), 25 Nov - 2 Dec 2003, Melbourne, Australia.

Ku, H. (2003) Curing vinyl ester particle-reinforced composites using microwaves. Journal of Composite Materials, 37 (22). pp. 2027-2042. ISSN 0021-9983

Chen, G. and Baker, Graham (2003) Influence of bond slip on crack spacing in numerical modeling of reinforced concrete. Journal of Structural Engineering, 129 (11). pp. 1514-1521. ISSN 0733-9445

Billingsley, John, ed. (2003) Mechatronics and machine vision 2003: future trends. Robotics and Mechatronics , 5 . Research Studies Press, Taunton, England. ISBN 0863802907; 9780863802904

Khennane, Amar and Melchers, Robert E. (2003) Meso-scale finite element investigation into the short and long term strengths of glass fibre reinforced composites. Technical Report. University of Southern Queensland, Faculty of Engineering and Surveying, Toowoomba, Australia.

Dowling, David (2003) Inducting new academic staff into a flexible education environment. In: AaeE 2003: Engineering Education for a Sustainable Future, 29 Sep - 1 Oct 2003, Melbourne, Australia.

Thorpe, David (2003) The challenges of educating engineering and technology managers. In: AaeE 2003: Engineering Education for a Sustainable Future, 29 Sep-1 Oct 2003, Melbourne, Australia.

Jensen, Troy and Apan, Armando and Young, Frank R. and Zeller, Leslie Charles and Cleminson, Ken (2003) Assessing grain crop attributes using digital imagery acquired from a low-altitude remote controlled aircraft. In: 2003 Spatial Sciences Institute Conference: Spatial Knowledge Without Boundaries (SSC2003) , 22-27 Sept 2003, Canberra, Australia.

Apan, Armando and Held, Alex and Phinn, Stuart and Markley, John (2003) Formulation and assessment of narrow-band vegetation indices from EO-1 hyperion imagery for discriminating sugarcane disease. In: 2003 Spatial Sciences Institute Biennial Conference: Spatial Knowledge Without Boundaries (SSC2003), 22-26 Sept 2003, Canberra, Australia.

Basnet, Badri Bahadur and Apan, Armando and Kelly, Rob and Jensen, Troy and Strong, Wayne and Butler, David (2003) Relating satellite imagery with grain protein content. In: 2003 Spatial Sciences Institute Biennial Conference: Spatial Knowledge Without Boundaries (SSC2003), 22-27 Sept 2003, Canberra, Australia.

Xiang, Wei and Pietrobon, Steven S. (2003) On the capacity and normalisation of ISI channels. IEEE Transactions on Information Theory, 49 (9). pp. 2263-2268. ISSN 0018-9448

Ku, Harry S. and Siu, Fred and Siores, Elias and Ball, James A. R. (2003) Variable frequency microwave (VFM) processing facilities and application in processing thermoplastic matrix composites. Journal of Materials Processing Technology, 139 ((1-3 SPEC)). pp. 291-295. ISSN 0924-0136

Lokuge, Weena and Setunge, Sujeeva and Sanjayan, J. G. (2003) Modelling eccentrically loaded high-strength concrete columns. Magazine of Concrete Research, 55 (4). pp. 331-341. ISSN 0024-9831

Yan, Wenyi and Liu, Hong-Yuan and Mai, Yiu-Wing (2003) Numerical study on the mode I delamination toughness of z-pinned laminates. Composites Science and Technology, 63 (10). pp. 1481-1493. ISSN 0266-3538

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2003) Triaxial test results of high-strength concrete subjected to cyclic loading. Magazine of Concrete Research, 55 (4). pp. 321-329. ISSN 0024-9831

Buttsworth, David R. and Jones, Terry V. (2003) Concentration probe measurements in a Mach 4 nonreacting hydrogen jet. Journal of Fluids Engineering, 125 (4). pp. 628-635. ISSN 0098-2202

Ku, Harry S. (2003) Contrast joints of glass-fibre with carbon-fibre reinforced polystyrene composite bonded by microwave irradiation. Transactions, Hong Kong Institution of Engineers, 10 (2). pp. 10-16. ISSN 1023-697X

Islam, Md Mainul and Watanabe, Taiji (2003) Crack opening behavior in aluminum alloy 5083. Journal of Mechanical Engineering, Institution of Engineers, Bangladesh, ME 32 . pp. 26-35. ISSN 0379-4318

Liang, Qing Quan and Uy, Brian and Wright, Howard D. and Bradford, Mark A. (2003) Local and post-local buckling of steel-concrete composite panels under combined states of stresses. In: Proceedings of the International Conference on Advances in Structures (ASSCCA'03), 22-25 June 2003, Sydney, Australia.

Takemura, Takato and Golshani, Aliakbar and Oda, Masanobu and Suzuki, Kenichiro (2003) Preferred orientations of open microcracks in granite and their relation with anisotropic elasticity. International Journal of Rock Mechanics and Mining Sciences, 40 (4). pp. 443-454. ISSN 1365-1609

Kist, Alexander A. and Harris, Richard J. (2003) Scheme for alternative packet overflow routing (SAPOR). In: 2003 Workshop on High Performance Switching and Routing (HPSR 2003), 24-27 Jun 2003, Torino, Italy.

Zhuge, Yan and Hunt, Suzanne P. (2003) Numerical simulation of masonry shear panels with distinct element approach. Structural Engineering and Mechanics, 15 (4). pp. 477-493. ISSN 1225-4568

Buttsworth, David R. and Ahfock, Tony L. (2003) A pulsed LED system for schlieren flow visualisation. Technical Report. University of Southern Queensland, Faculty of Engineering and Surveying, Toowoomba, Australia.

Mai-Duy, Nam and Tran-Cong, Thanh (2003) Approximation of function and its derivatives using radial basis function networks. Applied Mathematical Modelling, 27 (3). pp. 197-220. ISSN 0307-904X

Ku, Harry S. and Lee, Kin Fung and Li, Chun Wai (2003) Thermal analysis of joining thermoplastic matrix composites using microwaves. Transactions, Hong Kong Institution of Engineers, 10 (1). pp. 14-20. ISSN 1023-697X

Buttsworth, David R. and Jones, Terry V. (2003) High bandwidth stagnation temperature measurements in a Mach 6 gun tunnel flow. Experimental Thermal and Fluid Science, 27 (2). pp. 177-186. ISSN 0894-1777

Xiang, Wei and Pietrobon, Steven S. and Barbulescu, Sorin Adrian (2003) Iterative source-channel decoding for robust image transmission. In: 4th Australian Communications Theory Workshop (AusCTW 2003), 05-07 Feb 2003, Melbourne, Victoria.

Chen, Guangnan and Baker, Graham (2003) An energy model for bifurcation analysis of a double-notched concrete panel: continuum model. Advances in Structural Engineering, 6 (1). pp. 45-51. ISSN 1369-4332

Epaarachchi, Jayantha A. and Clausen, Philip D. (2003) An empirical model for fatigue behavior prediction of glass fibre-reinforced plastic (GFRP) composites for various stress ratios and test frequencies. Composites Part A: Applied Science and Manufacturing, 34 (4). pp. 313-326. ISSN 1359-835X

Coker, Rick (2003) An investigation into the feasibility and application of fibre composites to flatbed semi-trailers. [Thesis (_PhD/Research)] (Unpublished)

Islam, Md Mainul and Khan, Kamrujjaman and Ali, Md Nawsher and Islam, Md Shahidul (2003) An investigation on the raw materials and products of the briquetting machine. In: 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003), 19-20 Dec 2003 , Khulna, Bangladesh.

Khan, Kamrujjaman and Islam, Md Mainul and Rahman, M. L. and Ali, Md Nawsher (2003) An overview of energy profile for Bangladesh: past, present and future uses. In: 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003), 19-20 Dec 2003, Khulna, Bangladesh.

Lam, Y. C. and Santhikumar, S. (2003) Automated rib location and optimization for plate structures. Structural and Multidiscipline Optimization, 25 (1). pp. 35-45. ISSN 1615-1488

Layanto, Jeffrey and Cubero, Sam and Goode, Matthew (2003) Autonomous racing car competition for mechatronics engineering education. In: 10th Annual Conference on Mechatronics and Machine Vision in Practice, 9-11 Dec 2003 , Perth, Western Australia.

Ziri-Castro, Karla and Scanlon, William and Feustle, R. and Evans, Noel (2003) Channel modelling and propagation measurements for a bodyworn 5.2 GHz terminal moving in the indoor environment. In: 12th IEE International Conference on Antennas and Propagation, 31 Mar - 3 April 2003, Exeter, United Kingdom.

Bullen, Frank (2003) Design and construction of low-cost, low-volume roads in Australia. Transportation Research Record: Journal of the Transportation Research Board, 1819 . pp. 173-179. ISSN 0361-1981

Chong, Albert K.-F. and McFadgen, B. G. and Majid, Zulkepli and McKinlay, H. and Luther, S. and McHutchon, N. and Khaw, C. J. and Wang, S. and Ahmad, Anuar B. (2003) Digital architectural photogrammetric recording of historical buildings and monuments. New Zealand Surveyor, 293 . pp. 25-28. ISSN 0048-0150

Kist, Alexander A. and Harris, Richard J. (2003) Dynamic resource allocation in 3GPP SIP overlay networks. In: 2003 Joint Conference of the 4th International Conference on Information, Communications and Signal Processing and the 4th Pacific Rim Conference on Multimedia, 15-18 Dec 2003, Singapore.

Sharifian, Ahmad (2003) Fibre optic pressure transducers for disturbance measurements in transient aerodynamic research facilities. [Thesis (_PhD/Research)] (Unpublished)

Lee, Donald C. (2003) Geospatial data sharing in Saudi Arabia. [Thesis (_PhD/Research)] (Unpublished)

Yusaf, Talal and Buttsworth, David R. and Deeth, Hilton C. (2003) Heat transfer in an ultrasonic processing cell: preliminary measurements. Emirates Journal of Agricultural Sciences , 15 (2). pp. 80-86. ISSN 1021-1357

Xiang, Wei and Pietrobon, Steven S. and Barbulescu, Sorin Adrian (2003) Iterative decoding of JPEG coded images with channel coding. In: 10th IEEE International Conference on Telecommunications, Feb 2003, Papeete, Tahiti.

Ku, Harry S. (2003) Joining of thirty three percent by weight random carbon fibre reinforced low density polyethylene using variable frequency microwave. Journal of The Institution of Engineers, Singapore, 43 (1). pp. 20-25. ISSN 0377-7464

Xiang, Wei and Pietrobon, Steven S. and Barbulescu, Steven (2003) Joint source-channel codec: a more power efficient technology for image transmission. In: 3rd International Symposium on Turbo Codes, 1-5 Sept 2003, Brest, France.

Xiang, Wei and Pietrobon, Steven S. and Barbulescu, Sorin Adrian (2003) Joint source-channel decoding of JPEG images using error resilient source codes. In: 2003 IEEE International Symposium on Information Theory, 29 Jun - 4 Jul 2003, Yokohama, Japan.

McDougall, Kevin and Paterson, Mark (2003) Land tenure management in a dynamic social, economic and environmental context. In: 2003 Spatial Sciences Institute Biennial Conference: Spatial Knowledge Without Boundaries (SSC2003), 22-26 Sep 2003, Canberra, Australia.

Ku, Harry S. and Siores, Elias and Ball, James A. R. and Taube, Alex and Siu, Fred (2003) Lap shear strength comparison between different random glass fibre reinforced thermoplastic matrix composites bonded by adhesives using variable frequency microwaves (VFM) irradiation. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 217 (1). pp. 65-75. ISSN 1464-4207

Liang, Qing Quan and Uy, Brian and Wright, Howard D. and Bradford, Mark A. (2003) Local and post-local buckling of double skin composite panels. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 156 (2). pp. 111-119. ISSN 0965-0911

Warnest, Matthew and McDougall, Kevin and Rajabifard, Abbas and Williamson, Ian (2003) Local and state-based collaboration: the key to unlocking the potential of SDI. In: 2003 Spatial Sciences Institute Biennial Conference: Spatial Knowledge Without Boundaries (SSC2003), 22-26 Sep 2003, Canberra, Australia.

Chen, G. and Baker, Graham (2003) Material softening and structural instability. Advances in Structural Engineering, 6 (4). pp. 353-357. ISSN 1369-4332

Ryley, M. J. and Jensen, Troy and Kyei, A. N. (2003) Mechanical harvesting reduces sphacelia/sclerote levels of claviceps africana. International Sorghum and Millets Newsletter (44). pp. 100-102. ISSN 1023-487X

Fulcher, Robert and Snook, Chris (2003) Mechatronic engineering by distance education. In: 10th Annual Conference on Mechatronics and Machine Vision in Practice, 9-11 Dec 2003 , Perth, Western Australia.

Li, Yan and Wen, Peng and Powers, David (2003) Methods for the blind signal separation problem. In: ICNNSP 2003: International Conference on Neural Networks and Signal Processing , 14-17 Dec 2003 , Nanjing, China.

Wen, Peng and Li, Yan (2003) Non-layered human head model for EEG. In: IEEE EMBS Asian-Pacific Conference on Biomedical Engineering, 20-22 Oct 2003, Kyoto-Osaka-Nara, Japan.

Kist, Alexander A. and Harris, Richard J. (2003) Note on the problem of partially link disjoint paths. In: 2003 Joint Conference of the 4th International Conference on Information, Communications and Signal Processing and the 4th Pacific Rim Conference on Multimedia, 15-18 Dec 2003, Singapore.

Xiang, Wei and Pietrobon, Steven S. (2003) On the capacity and normalisation of ISI channels. In: 2003 IEEE International Conference on Communications (ICC2003), 11-15 May 2003, Anchorage, Alaska, USA.

Thorpe, David (2003) Online remote construction management trials in Queensland Department of Main Roads: a participant's perspective. Construction Innovation: Information, Process, Management, 3 (2). pp. 65-79. ISSN 1471-4175

McDougall, Kevin and Young, Frank R. and Apan, Armando (2003) Operational infrastructure for quality distance and online geospatial programs. Cartography, 32 (1). pp. 25-38. ISSN 0069-0805

Wang, Hao (2003) Present status and future trends in production of semisolid materials. Tezhong Zhuzao Ji Youse Hejin (Special Casting and Nonferrous Alloys), 131 . pp. 332-334. ISSN 1001-2249

Mai-Duy, Nam and Tran-Cong, Thanh (2003) RBF interpolation of boundary values in the BEM for heat transfer problems. International Journal of Numerical Methods for Heat and Fluid Flow, 13 (5/6). pp. 611-632. ISSN 0961-5539

Wen, Peng and Pope, Kenneth (2003) Realistic human head model for EEG from both the geometry and conductivity aspects. Australasian Physical and Engineering Sciences in Medicine, 26 (1). pp. 1-5. ISSN 0158-9938

Misra, R. K. (2003) Root growth pressure at the soil–root interface. In: Lal, Rattan, (ed.) Encyclopedia of soil science, 2nd ed. Marcel Dekker, Inc., New York, NY, USA, pp. 1-3. ISBN 978-0-8493-3830-4 (hbk) ; 978-0-8493-5051-1 (electronic)

Kist, Alexander A. and Harris, Richard J. (2003) SIP routing methodologies in 3GPP. In: 1st International Working Conference on Performance Modelling and Evaluation of Heterogeneous Networks (HET-NETs '03), July 2003, Ilkley, West Yorkshire, U.K.

Kist, Alexander A. and Harris, Richard J. (2003) SIP signalling delay in 3GPP. In: Sixth International Symposium on Communications Interworking of IFIP - Interworking 2002, 13-16 Oct 2002, Fremantle, Australia.

Ferdous, Chy. Md Refaul and Islam, Md Shahidul and Islam, Md Mainul and Alam, Md Ashraful and Rahman, A. N. M.Mizanur (2003) Solar photovoltaic technology and Bangladesh. In: 2003 National Seminar on the Role of Renewable and Alternative Energy Sources for National Development (SRRAESND-2003), 19-20 Dec 2003, Khulna, Bangladesh.

Vacher, Cameron A. and Loch, Rob and Raine, Steven R. (2003) The effect of polyacrylamide additions on the infiltration and erosion of disturbed lands. Soil Research, 41 (8). pp. 1509-1520. ISSN 0004-9573

Wen, Peng (2003) The impact of inhomogeneous tissue anisotropy on potential distribution within head model. Australasian Physical and Engineering Sciences in Medicine, 26 (3). pp. 87-90. ISSN 0158-9938

McCarthy, Stuart George (2003) The integration of sensory control for sugar cane harvesters. [Thesis (_PhD/Research)] (Unpublished)

Schultz, Bradley Jason (2003) The mechatronic bakery. [Thesis (_PhD/Research)] (Unpublished)

Merifield, Richard S. and Sloan, Scott W. and Lyamin, Andrei V. (2003) The stability of inclined plate anchors in purely cohesive soil. Technical Report. University of Southern Queensland, Faculty of Engineering and Surveying, Toowoomba, Australia.

Yan, Wenyi and Wang, Chun Hui and Zhang, Xin Ping and Mai, Yiu-Wing (2003) Theoretical modeling of the effect of plasticity on reverse transformation in superelastic shape memory alloys. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing , 354 (1-2). pp. 146-157. ISSN 0921-5093

Ku, Harry S. and Lee, Kin Fung and Li, Chun Wai (2003) Thermal analysis comparison between two random glass fibre reinforced thermoplastic matrix composites bonded by adhesives using microwaves: preliminary results. Journal of Electromagnetic Waves and Applications, 17 (6). pp. 901-918. ISSN 0920-5071

Ku, Harry S. and Widjaya, Budiman and Lee, Kin Fung and Li, Chun Wai (2003) Thermal analysis of joining Nylon 66 composites using microwave irradiations. Transactions of the Canadian Society for Mechanical Engineering, 27 (3). pp. 259-278. ISSN 0315-8977

Merifield, Richard S. and Sloan, Scott W. and Lyamin, Andrei V. (2003) Three dimensional lower bound solutions for the stability of plate anchors in sand. Technical Report. University of Southern Queensland, Faculty of Engineering and Surveying, Toowoomba, Australia.

Xiang, Wei and Barbulescu, S. Adrian (2003) Turbo diversity scheme applied to JPEG image transmission. In: IEEE International Symposium on Intelligent Signal Processing and Communication Systems (ISPACS 2002), 2002, Kaohsiung,Taiwan.

Bullen, Frank (2003) Use of coral-derived aggregates for construction of low-volume roads. Transportation Research Record: Journal of the Transportation Research Board , 1819 . pp. 134-142. ISSN 0361-1981

Kist, Alexander A. and Harris, Richard J. (2003) Using virtual SIP links to enable QoS for signalling. In: 11th IEEE International Conference on Networks (ICON 2003), 28 Sept - 1 Oct 2003 , Sydney, Australia.

Parsons, David (2003) Waringh Waringh: a history of Aboriginal People in the Warwick Area and their Land. David Parsons, Maryvale, Queensland. ISBN 0 646 42426 2

Brodie, Lyn (2003) Welding of skin using Nd:YAG laser with bipolar contact applicators. [Thesis (_PhD/Research)] (Unpublished)

2002

Kamel, Fouad (2002) Optimum operating temperature for evacuated tube solar collectors. In: 40th Annual Conference of the Australian and New Zealand Solar Energy Society (Solar02): Solar Harvest, 25 Nov - 2 Dec 2002, Newcastle, Australia.

Kist, Alexander A. and Harris, Richard J. (2002) A heuristic to generate all best partially disjoint paths in a communications network. In: 8th International Conference on Communication Systems (ICCS 2002), 25-28 Nov 2002, Singapore.

Cox, Graeme J. (2002) A yield mapping system for sugar cane chopper harvesters. [Thesis (_PhD/Research)] (Unpublished)

Liang, Qing Quan and Uy, Brian and Wright, Howard D. and Bradford, Mark A. (2002) Local buckling of biaxially compressed steel plates in double skin composite panels. In: Proceedings of the Third International Conference on Advances in Steel Structures, 9-11 Dec 2002, Hong Kong, China.

Buttsworth, David R. (2002) Spark ignition internal combustion engine modelling using Matlab. Technical Report. University of Southern Queensland, Faculty of Engineering and Surveying, Toowoomba, Australia.

Leis, John W. (2002) Buffering issues in TCP-based services. Technical Report. University of Southern Queensland, Faculty of Engineering and Surveying, Toowoomba, Australia.

Snook, Chris and Fulcher, Bob (2002) A review of teaching strategies in practical work for mechanical and mechatronic engineering students studying via on-campus and distance education. In: AaeE 2002: Leadership in Learning: Learning in Leadership, 30 Sep - 3 Oct 2002, Canberra, Australia.

Walkington, Jackie and Dowling, David (2002) An assessment paradox: striving for best practice in an environment of increasing constraints. In: AaeE 2002: Leadership in Learning: Learning in Leadership, 30 Sep - 3 Oct 2002, Canberra, Australia.

Snook, Chris and Leis, John (2002) System configuration and IP networking: a team-based laboratory course. In: AaeE 2002: Leadership in Learning: Learning in Leadership, 30 Sep - 3 Oct 2002, Canberra, Australia.

Buttsworth, David R. (2002) Transient response of an erodable heat flux gauge using finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216 (8). pp. 701-716. ISSN 0954-4070

Ku, Harry S. and Siu, Fred and Siores, Elias and Ball, James A. R. (2002) Applications of fixed and variable frequency microwave (VFM) facilities in polymeric materials processing and joining. In: 2nd World Engineering Congress, 22-25 July 2002, Kuching, Malaysia.

Ku, Harry S. and Siu, Fred and Mok, P. L. and Siores, Elias and Ball, James A. R. (2002) Characterisation of chip-on-board (COB) encapsulate epoxies used in the printed circuit board assembly (PCBA) industry using variable frequency microwave (VFM) facilities. In: 2nd World Engineering Congress, 22-25 July 2002, Kuching, Malaysia.

Ku, Harry S. and Van Erp, Gerard and Ball, James A. R. and Ayers, Stephen R. and Siu, Fred (2002) Shrinkage reduction of thermoset fibre composites during hardening using microwaves irradiation for curing. In: 2nd World Engineering Congress, 22-25 Jul 2002, Kuching, Malaysia.

Buttsworth, David R. (2002) Heat transfer during transient compression: measurements and simulations. Shock Waves, 12 (1). pp. 87-91. ISSN 0938-1287

Kamel, Fouad and Wilson, Paul (2002) Cost of kWh produced and payback time of a pv-solar-thermal-combined rooftop collector at different locations in New Zealand. In: EEA Annual Conference & Trade Exhibition 2002: Meeting the Challenges of Growth, 21-22 June 2002, Christchurch, New Zealand.

McDougall, Kevin and Rajabifard, Abbas and Williamson, Ian (2002) From little things big things grow: building the SDI from local government up. In: Joint AURISA 2002 and 3rd Trans Tasman Surveyors Conference: e-Future: into the Mainstream, 25-30 Nov 2002, Adelaide, Australia.

George, Lucy and McDougall, Kevin (2002) Engaging minds through problem solving - a day in the life of a scientist. In: Australian Science Teacher's Association National Conference (CONASTA 51), 6-11 July 2002, Hobart, Tasmania.

Ku, Harry S. and Siores, Elias and Taube, Alex and Ball, James A. R. (2002) Productivity improvements through the use of industrial microwave technologies. Computers and Industrial Engineering, 42 (2-4). pp. 281-290. ISSN 0360-8352

Buttsworth, David R. and Jacobs, Peter A. and Jones, Terry V. (2002)