Browse by Centre

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type | Uncontrolled Keywords | Authors Name | No Grouping
1-lactic acid) (PLA) 20th Australasian Conference on the Mechanics of Structures and Materials 3-rib chest structure 33 percent by weight carbon-fibre-reinforced low density polyethylene [LDPE/CF (33%)] 33 percent by weight glass-fibre-reinforced low density polyethylene [LDPE/GF (33%)] A356 Al alloy A356 alloy A356 alloys ABAQUS abrasive wear ACMSM20 acoustic emission acoustic noise acrylated epoxidized hemp oil activated carbon additives adhesion adhesion wear adhesive wear adhesives advanced manufacturing advanced robust AEHO aerogels aerospace structures AFM agglomeration aggregate agriculture AIP refinement aircraft material Al-Si alloy alkali activation alkali treated alkali treatment alkali-activated materials alkaline activation alloy alloy composition alloys AlSi7Mgn alternative materials alternative sleeper materials alumina alumina ceramics aluminium fiber aluminium powder aluminium-silicon alloy aluminosilicates aluminum aluminum casting amorphous matrices analysis analytical chemistry analytical modelling analytical predictions analytical results angle measurement animal fibre annealing applications Araldite Araldite and carbon fibre arenga pinnata arenga pinnata fibre articular cartilages articulation artificial neural network artificial neural networks as-cast AS1684 assessment asymmetrical beam asymmetrical beam shear test asymmetrical beams atomic force microscopes Australia Australian automobile parts axial back-propagation backpack load bamboo bamboo charcoal bamboo fibres barnacles bast fibre batch reactor batteries battery storage beam beam cross section beam tests beams beams and girders behaviour bell-type furnace bending bending behaviour bending stiffness bending strength bending stress betelnut fibre betelnut fibres binary composites bio composite bio composites bio-composites bio-corrosion bio-degradability bio-engineering bio-materials bio-medical bio-resins biochemistry biocompatibility biocomposite biocomposites biocorrosion biocorrosion behaviour biodegradable biodegradable material biodegradable materials biodegradable plastic biodegradable plastics biodegradable properties biodegradation biofilm biomaterial biomaterials biomechanical surrogate biopolymers bioresin bioresins bioresorbability bioresorbable polymers blast simulation block loading blunt thoracic trauma blunt trauma BMG composites BMG matrix composites bolted joint bolted joints Bombyx mori bond strength bonded AFRP sheets bonded joints bonding bonding materials bone bone implant bone properties bone repair bone tissue engineering boundary conditions bovine cortical bone box beam Bragg wavelength bridge bridge design bridge girder bridge girders bridge repair bridges brittleness broadband light sources buckling theory building building construction building materials bulk amorphous alloy bulk amorphous alloys bulk metallic glass bulk metallic glass matrix composite bulk metallic glasses bulk volume bulk volume expansion bullbar buoyancy CAFVM calcium calibration capacity carbide tools carbon carbon fiber reinforced platics carbon fibre carbon fibre and Araldite carbon fibre and glass fibre carbon fibre reinforced polymer carbon fibre reinforced polymer (CFRP) carbon nanotube carbon nanotubes carbon nanotubes (CNT) carbon-fibre carbonation cardanol cartesian grids cashew nut shell liquid cast composites casting casting temperature casting temperatures catalysts catalytic effects cell performance cell structure cellular automaton (CA) cemented carbides ceramic microspheres CFRP CFRP composites chain dynamics characteristics degradation chemical treatment chemical treatments chicken feathers chloride penetration chopped bagasse fibers civil applications civil construction civil engineering civil engineering applications civil engineers civil infrastructure civil infrastructures clamped plates clay clay nanocomposites clogging CNTs coating coating methods coatings coconut coconut shell codes of practice codes of practice and standards coiled carbon nanotube coiled carbon nanotubes coiled nanotubes coir fiber collapsed tubes column columnar equiaxed transition (CET) combustion comparison compatibilization compatibilized blends complex structures composite composite action composite beam composite beams composite fibres composite laminate composite materials composite panels composite piles composite plates composite polymer matrix composite properties composite repair composite sandwich beam composite sandwich beams composite sandwich structure composite sandwiches composite scaffolds composite structures composite systems composite systems fly ash composite tubes composite walls composites compression compression and shear compression failure compression moulding compression stress compression test compression tests compressive compressive behaviour and modelling compressive elastic modulus compressive properties compressive strength computational modelling computer simulation concrete concrete beam concrete columns concrete deck concrete face concrete properties concrete reinforcements concrete repair concrete structures confinement connection connections connector constant head Constitutive relations construction construction industries construction materials contact angle contact mechanism context controlled nucleation controlled nucleation method conventional ovens convergence Cook-Weisberg test cooling rate cooperative research centres copper mould casting core core cracking load core shear correlation correlation coefficient corroded steel corroded steel angles corrosion corrosion behavior corrosion of steel corrosion rate corrosion resistance cotton fabric cotton fiber counterface materials coupon test coupons CPF resins crack cracked beam cracking cracking opening angle cracks CRC credit transfer creep critical length cross link density cross-link density crosslink density crushing stress crystal crystalline phase crystallization crystallization behaviour crystallographic CTBN Cu based BMG Cu-based Cu-based BMG Cu/Al composite cumulative damage cure shrinkage curing curing of polymers curriculum Cyclic loads cyclic stability cylindrical specimens damage accumulation damage detection damage mechanics damage tolerance damping date palm date palm fibre debonding debonds decking deflection deformation deformation behaviour deformation mechanism deformation mechanisms degradability degradation degumming delaminated composite beams delamination delaminations dendrite deployable deployable shelters deployable structures design design methods design model design optimisation design optimization design principles destructive testing detection technique deterioration developments Dexamethasones dielectric constant dielectric loss dielectric loss tangent differential scanning calorimetry differential scanning calorimetry (DSC) differential scanning calorimetry (photo-DSC) dimensional control Direct Shear Test disaster discrete element modelling disinfection disinfection by-product dislocation sliding dispersion stability dissolution distance education distance students distortion distribution method dominant frequency dough driveability drop weight impact strength drop-weight test ductility durability dynamic behavior dynamic behaviour dynamic mechanical analysis dynamic mechanical analysis (DMTA) dynamic mechanical properties dynamic mechanical property dynamic mechanical thermal analysis dynamic mechanical thermal analysis (DMTA) dynamic stress dynamic stress analysis earthquake earthquake intensity index earthquakes eccentricity edgewise effect effective heat conductivity effective heat conductivity effective length effective specific heat efflorescence EHO elastic modulus elastic properties electric fields electrical loss tangent electrical losses electrical properties electrochemical corrosion electrochemical impedance spectroscopy electrochemical performance electromechanical coupling electromechanical devices electron microscopy electron transfer elevated temperature Eley-Rideal mechanism embed embedded FBG embedded sensors empirical model end mills energy absorption energy absorption behaviour energy efficiency engineering engineering design engineering education engineering leadership program engineering management science engineering materials environment environmental friendly environmental regulation envirospheres EPON epoxidation epoxidized hemp oil epoxidized oils epoxidized vegetable oil epoxidized vegetable oils epoxies epoxy epoxy composites epoxy compounds epoxy grout epoxy injection epoxy resin epoxy resin hollow glass powder equiaxed structures ergonomic design error termination ester composites Europe EVO Excel exfoliation expansion chambers experimental experimental data external clamping external post tensioning external post-tensioning external prestressing external studies fabric fabricating process fabrication fabrication and characterizations fabrication technique failure failure analysis failure behaviour failure criteria failure index failure map failure mechanisms failure mode map failure modes failures falling head fatigue fatigue loadings fatigue properties fatigue resistance FBG FBG sensors FBG sensor FBG sensors FEA fiber Fiber Bragg grating (FBG) fiber Bragg grating sensor fiber composites fiber reinforced polymer fiber-optic sensors fiber-reinforced polymer (FRP) fibers fibre fibre Bragg grating sensors fibre composite fibre composite sandwich panel fibre composites fibre constituents fibre diameter fibre lengths fibre model analysis fibre optic sensors fibre orientation fibre properties fibre reinforced fibre reinforced plastic (FRP) fibre reinforced plastics fibre reinforced polymer fibre reinforced polymer (FRP) fibre reinforced polymer composites fibre reinforced polymers fibre reinforced thermoplastic composites (FRTP) fibre wraps fibre-glass fibre-matrix compatibility fibre/matrix bond fibreglass fibres field application field emission scanning electron microscopy field experiment field-emission transmission electron microscopies filler filler addition fillers finish temperature finite element finite element analysis finite element method finite element modeling finite element modelling finite elements finite-discrete element method fire fire resistance Fisher-Snedocor test fixed frequency microwaves fixity flame retardation flatwise flexibility flexible delivery flexural behavior flexural behaviour flexural failure flexural modulus flexural stiffness flexural strain flexural strength flexural strengthening flexural test flexural tests flexure floor floor panel floor slabs flooring system flowthrough fluids Fly ash foam foam concrete foam grenade foam products force method model formative assessments forming four-point bending Fourier transform infrared spectroscopy (FTIR) fracture fracture mechanics fracture mechanism fracture morphology fracture toughness fragmentation free energy free vibration frequency frequency bands friction friction coefficients FRP FRP composites FRP confinement FRP materials FRP pultruded tubes FRP retrofitting FRP structures FTIR fuel cell full-scale testing fullerene garamite gel time gelatinisation gelatinization genetice algorithm geometry effects geopolymer geopolymer concrete geopolymers GFRP GFRP composites GFRP sandwich GFRP structures glass glass chemistry glass fiber composites glass fiber reinforced composites glass fiber reinforced plastics glass fiber-reinforced epoxy glass fibre glass fibre composite glass fibre composites glass fibre reinforced polymer glass fibre reinforced polymers glass fibre-reinforced polymer glass fibres glass forming ability glass hollow spheres glass microspheres glass non-uniform strain glass powder glass transition temperature glass-fibre glass-forming ability glasses globular structure glucose glue-laminated beam glue-laminated beams glued sandwich beams glulam beams glycerol gomuti gomuti fibre good correlations government grain coarsening grain growth grain morphologies grain size grain structure grain structures graphene graphene nanosheets graphite green building materials green composites green materials grillage beam analogy grout halloysite halloysite nanotubes hanger hardness hardwood timber HDPE head impact head injury criterion headform headstock headstocks health monitoring heart rates heat heat affected zone heat applied heat released heat treatment heavy loads height reduction hemicellulose constituents hemp hemp fibre hemp fibres hemp oil hemp oil based bioresin hemp oil based bioresins hemp thermoset sandwich composites heterogeneous nucleations heterogeneous reaction Heuristic algorithms hexagonal core hexagons high flexibility high strength concrete high strength concretes high strength conductive polymers high temperature proton exchange membrane high temperature strength high-strength concrete high-tensile strength high-tensile strengths hollow core hollow FRP piles hollow micro-spheres hollow microsphere hollow particles hot deformation hot drawing hot rolling hot tear hybrid beam hybrid compounds hybrid fiber reinforced polymer hybrid FRP hybrid FRP composite hybrid FRP composites hybrid girders hybrid materials hybrid structure hybrid-III dummy hydrogen hydrogen peroxide hydrogen storage hydrophilic properties hydrophilicity hygroscopic behavior hypereutectic aluminium alloy IBVMS image monitoring impact impact behavior impact behaviour impact damage impact fatigue impact intensity impact property impact resistance impact toughness impedance implants in situ scanning electron microscopies in-line in-plane in-plane loads in-plane shear in-situ aluminium-based composite in-situ polymerization in-situ TiC particles inclusion incompressible viscous flow indicator industrial engineering industry infrastructure initial strains initial values injection moulders injection moulding innovation inorganic polymer integrated radial basis functions integrity interaction diagram interface interface bonding interface bondings interface temperature interfacial adhesion interfacial shear strength intermediate layer internal friction/damping internal mixing process intra-molecular bonding ion exchange resin iron aluminide iron aluminides ISI isothermal conduction calorimetry isothermal holding Izod jacket Jarque-Berra test joint joist jute kaolin kenaf fiber kenaf fibre key parameters kinetics kinetics (polym.) Lagrange’s Method lamb wave laminated glass laminated panels laminated sandwich beams laminated sandwich plates Langmuir-Hinshelwood-Hougen-Watson model lap shear strength laser sources lattice model leaching learning resource least square method leg reinforcement life time prediction light composites light weight Lightweight geopolymer lignocellulosic composites linear programming linkages linseed oil literature review load load transfer lag load-deflection relation loading ability location detection locking key long-term longitudinal strength loss modulus loss tangent low densioty polyethylene low density polyethylene low loss low temperature pouring low-frequency noise lubricant additives lubricant oil lubricating oils M2S2 machine magnesium magnesium alloy magnesium alloys magnesium oxide board management management science manufacture manufacturing manufacturing process manufacturing processes MAPP marine concrete marine engineering materials marine structures market intelligence marketing data analysis masonry materail processing material composition material properties Materials science mathematical model mathematical modeling matrix matrix materials maximum flexural strain mechanical mechanical anchorage mechanical and thermal properties mechanical behavior mechanical behaviour mechanical characterization mechanical joints mechanical loss mechanical loss tangent mechanical losses mechanical properties mechanical property mechanical stirrings mechanical testing medical applications member capacity membrane mentoring metakaolin metal catalysts metal cutting industry metallic metallic composites metallic glasses metallic material method comparison metrology Mg alloys Mg matrix Mg-base alloy Mg65Cu25Gd10 micro businesses micro-crack density micro-hardness micro-spheres micro-structural microbially influenced corrosion (MIC) microcapsules microencapsulation microfibre resins microparameter microscope technologies microscopic observations Microsoft Office microsphere size microsphere sizes microstructural evolution microstructure microstructure and materials properties microstructure formation microstructure modeling microstructures microstructures and mechanical properties microwave irradiation microwaves microwaves and vinyl+ ester resin MID Miedema's model military modular shelter system milling machine design minimum intermicrosphere distance mixes mixing mixing enthalpy mixing process modal acoustic emission modeFRONTIER model modeling modelling modified cellular automaton modified phenolic core modulus modulus of elasticity moisture absorption moisture effect molding moment-curvature relation monitoring morphology moving least square multi-objective multi-pultrusion fibre composite multifunctional materials multiple back-propagation multiwall nanotubes myristic acid nafion nano materials nano research nano- SiO nano-architecture nano-structures nanoclay nanoclay/polymer composites nanocomposite nanocomposites nanoindentation nanoindentation tests nanoindenter nanomaterials nanoparticles nanostructured materials nanotechnology NaOH treatment concentration natural composites natural fiber natural fiber composites natural fibers natural fibre natural fibre composites natural fibre reinforced plastics (NFRP) natural fibres natural frequencies natural frequency natural materials natural polymers natural fibre Nd addition near-surface mounted reinforcement negative volume network optimisation network topology New Zealand nickel alloys nickel-titanium alloys NIR FBG sensor NIR FBG sensors NiTi Nitinol tube noil hemp fibre noise reductions noise reflections non-biodegradable non-lethal non-lethal ammunition non-linear autoregressive with exogenous non-linear dynamic analysis non-linear finite element non-linear transient impact analysis non-recyclable non-renewable nonconventional technologies normal strength concrete normalisation novel sandwich structure numerical numerical analysis numerical methods numerical simulation nylon 66 nylon fiber occupational health and safety one and two-way spanning one way one- and two-way spanning online course online discussions online postgraduate course online quizzes optimal content optimal design optimal noise optimisation optimization optimum design optimum yield order of magnitude organosolv lignin orthogonal design out-of-plane loads overwrap palm oil panel paper particle reinforced composites particle reinforcement particle-reinforcement particleboard particulate composite particulate composites partition of unity paste backfill pavement pedestrian safety peel strength peer assisted learning peptizer performance performance criteria permeability permeable concrete peroxycarboxylic acid pervious concrete PFC PG phase volume phenol formaldehyde phenolic phenolic composites phenolic core phenolic resin phenolic resins photocatalytic photocatalyts physical properties physiological strains pile pile driving pile materials pile rehabilitation piles pilot studies pipeline plant fiber plastic deformation plasticizing effect plastics PMC PMCs point load poisson ratio Poisson's ratio Poisson’s ratio poly lactic acid poly(d poly(lactic acid) polyester polyester based filler polyester composite polyester composites polyester matrix polyester resin polyethylene polyethyleneimine polylactic acid polylactic acids polymer composites polymer concrete polymer electrolyte membrane fuel cell (FEMFC) polymer matrix polymer-matrix composite polymer-matrix composites polymer-matrix composites (PMCs) polymer-matrix composites(PMCs) polymeric composites polymeric glass polymeric membrane polymeric scaffolds polymers polymer–matrix composites polymer–matrix composites (PMCs) polypropylene polypropylene matrix composites polypyrrole polystyrene polystyrene core polyurethane POM-QM for Windows 3 pore structure pore structures porosity porous concrete Porous geopolymer porous surface post-curing post-impact behaviour post-impact properties post-mold processing post-tension post-tensioning postgraduate course postgraduate program potassium persulfate (KPS) potential materials pouring temperature pouring temperatures powder metallurgy power demand PP practice course pre-mould pre-processing predict prediction of mechanical properties prefabrication preloading prestressing processing techniques production and operations management production engineering project-based approaches project-based learning propagation characteristics properties propylene glycol protective measures proton conductivity pull-out tests pultruded FRP pultruded sections pultruded tubes pultrusion pultrusions pultruted beams pure magnesium pure polymers PZT Q factor quality. quantitative methods railway railway engineering railway sleepers rainflow counting random short fiber composites randomly distributed rapidly solidified raw RC beams reaction kinetics reactivity reciprocity relations recrystallisation recrystallization recycled materials recycled mixed plastic composites recycled mixed plastics reducing noise reflection and transmission coefficients regression analysis rehabilitated steel rehabilitation reinforce reinforced composite plates reinforced composites reinforced concrete reinforced concrete beams reinforced honeycomb reinforced honeycombs reinforced plastics reinforcing remote renewable polymers renewable resources repair repeated impact damage modelling repeated impacts replacement replacement sleepers research and development residential residential school residual properties residual/internal stress resilience resin composites resins resorbable retrofit. retrofitting rigid polyurethane foam rock damage routing rubberwood rule of mixture sandwich sandwich beam sandwich beams sandwich composite sandwich composite beams sandwich composites sandwich construction sandwich core sandwich panel sandwich panels Sandwich structure sandwich structures sawdust scan rates scanning electron microscope scanning electron microscopy SDOF and MDOF systems seawater second phase secondary mineral sedimentation Seismic analysis seismic responses of structures self-similarity of diffusion SEM SEM and pull-out tests SEM imaging semi-solid metal processing semi-solid state semisolid semisolid casting semisolid deformation behavior semisolid feedstock semisolid metal processing semisolid processing semisolid state semisolid structure formation sericin shape memory shape memory alloy shape memory alloys shear shear behaviour shear connector shear crack shear cracks shear span shear span-to-depth ratio shear strength shear strengthening sheer strengthening shelters short bar test short bar test and viscosity short beam short-fiber composites shrinkage Si-based sign test signal analysis signal attenuation significance analysis silane treatment silica fume silk silk fibre silk fibres silk-based polymer composite silkworm silk silkworm silk fiber silkworm silk fibre silkworms simple cubic cell simplex method simulated annealing SA single and multi-span cable structures single fibre strength sintering SIPs siricin slab slabs slag SLG SLG and viscosity sliding friction sliding wear slurry SMA small business smart materials smart structure SME SMEs sodium silicate software packages solid mechanics Solid wastes solidification specific capacitance spectral change spectral distortion spectrophotometry spectrum spectrum loading sports injuries spot replacement spray formed 7075 Al alloy stability stainless steel gauze starch starch contents static flexural tests static loading static-fatigue static–fatigue statistical inference statistical methods statistical models statistical tests statistics steel coil steel lattice tower steel lattice transmission tower steel structures steel truss members step/spectrum loading stiffness stopband storage moduli storage modulus strain strain at break and flexural modulus strain energy strain rate strain rate sensitivity Strarch stream function-vorticity formulation strength strength (IGC: D5/D6) strength of materials strength to weight strengthening strengthening (metal) stress stress ratio effect stress strain relations stress-strain behaviour structural applications structural aspects structural behaviour structural composite sandwich panels structural composite sandwiches structural composition structural design structural engineering structural health monitoring structural health monotoring structural materials structural optimization structural performance structural rehabilitation structural strength structure structure conditions structure formation student performance styrene subgrade modulus sugar-palm fibre sulfate groups super-hydrophobic super-hydrophobic surfaces supercapacitor electrodes superelasticity superheat superhydrophobic support materials support modulus surface analysis surface chemistry surface coatings surface grafted surface modification surface morphology surface treatment surface treatments surfaces surgical operation surgical procedures sustainability sustainable sustainable fibres sustainable material synergetic effect syntactic foam Syntactic foams synthetic fibre synthetic fibres synthetic foams tannin teamwork temperature temperature field temporary support tensile tensile moduli tensile properties tensile strength tensile tests termination test methods testing textile material Tg TGA TGA-FTIR TGA/FTIR TGA–FTIR theoretical study thermal analysis thermal decomposition thermal gravimetric analysis thermal properties thermal runaway and loss tangent thermal stability thermo-gravimetric analysis thermodynamics thermomechanical thermomechanical analysis thermomechanical processing thermoplastic thermoplastic composites thermoplastic epoxy resin thermoplastic natural rubber thermoplastic polymer composites thermoplastics thermosets thermosetting resin thermosetting resins thick cylinder thick laminates thickness measurement thixotropic feedstock thorax three-dimensional tissue formation timber timber slabs timber sleepers time frequency analysis tissue engineering tissue engineering applications titanium alloys titanium dioxide tool life topology topology core torsional design torsional resistance toughening mechanisms toughness tower design TPE foam tracer transformation temperature transition transition metals transmission electron microscope (TEM) transmission line system transmission loss transmission tower transport costs transverse tribological tribological loading tribological properties tribology triple helix truss truss systems trusses tungsten turbulent patch turnout Turnout sleepers twin screw extruders two plates UDL UHMWPE ultimate tensile strength ultra-high performance fiber-reinforced concrete ultrasonic lamb waves ultrasonic sensing ultrasonic signals ultrasonics ultrasound unbalanced loads undergraduate engineering courses underground mine underwater undirectional uniform dispersions university unreinforced masonry unsaturated polyester URM UV curing variable frequency microwaves variable frequency microwaves (vfm) variable microwave frequency vegetable rubber resins ventilation systems VFM vibration vibration modes vibrio natriegens Vicker's hardness vinyl ester vinyl ester composite vinyl ester resin vinyl ester/cenosphere composites vinyl resin vinylester vinylester resin vinylester resins viscoelasticity viscosity voltammetry measurements volume expansion volume expansion of bulk microspheres volume expansion rate vulnerability Wald test wall noggings water water lubrication water contact angle water quenching water resistance water retention wave propagation wave scattering wavelet analysis wear wear of materials wear particles wear performance wear rates wear resistance wear testing weathering Weibull analysis weight content weight percentages weldability wet contact wind data wind mill wind turbine blades windmill windmill design windmills wood veneer woven roving X ray diffractometers X-ray diffraction (XRD) X-ray photoelectron spectroscopy (XPS) yarn yield strength Young modulus Young's modulus Young's Modulus silk fibre reinforced Young’s modulus zirconia zirconia nanoparticles Zr-based fly ash
Number of items: 2779.

1-lactic acid) (PLA)

Cheung, Hoi-Yan and Lau, Kin-tak and Tao, Xiao-Ming and Hui, David (2008) A potential material for tissue engineering: silkworm silk/PLA biocomposite. Composites Part B: Engineering, 39 (6). pp. 1026-1033. ISSN 1359-8368

20th Australasian Conference on the Mechanics of Structures and Materials

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao (2009) Preface to futures in mechanics of structures and materials conference. ACMSM20. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

3-rib chest structure

Thota, Narasimha Murthy and Eepaarachchi, Jayantha A. and Lau, K. T. (2012) Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study. In: 7th Australasian Congress on Applied Mechanics (ACAM 7), 9-12 Dec 2012, Adelaide, Australia.

33 percent by weight carbon-fibre-reinforced low density polyethylene [LDPE/CF (33%)]

Ku, H. S. (2008) Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation. Journal of Electromagnetic Waves and Applications, 22 (1). pp. 69-84. ISSN 0920-5071

33 percent by weight glass-fibre-reinforced low density polyethylene [LDPE/GF (33%)]

Ku, H. S. (2008) Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation. Journal of Electromagnetic Waves and Applications, 22 (1). pp. 69-84. ISSN 0920-5071

A356 Al alloy

Li, Qiang and Yu, Baoyi and Zhang, Huawen and Li, Runxia and Wang, Feng and Xie, Shuisheng and Huang, Guojie and Wang, Hao (2010) Cellular automaton modeling of semisolid microstructure formation. China Foundry, 7 (2). pp. 143-148. ISSN 1672-6421

A356 alloy

Ning, Zhiliang and Wang, Hao and Sun, Jianfei (2010) Deformation behavior of semisolid A356 alloy prepared by low temperature pouring. Materials and Manufacturing Processes, 25 (7). pp. 648-653. ISSN 1042-6914

A356 alloys

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

ABAQUS

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2011) Multi-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applications. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

abrasive wear

Yousif, B. F. and El-Tayeb, N. S. M. (2010) Wear characteristics of thermoset composite under high stress three-body abrasive. Tribology International, 43 (12). pp. 2365-2371. ISSN 0301-679X

ACMSM20

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao (2009) Preface to futures in mechanics of structures and materials conference. ACMSM20. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

acoustic emission

Kahandawa, G. C. and Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) Detecting delamination in a composite structure using an embedded FBG – AE hybrid system. In: 7th Australasian Congress on Applied Mechanics (ACAM 7), 9-12 Dec 2012, Adelaide, Australia.

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8) :Composites: Enabling Tomorrow’s Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

acoustic noise

Choy, Y. S. and Liu, Y. and Cheung, H. Y. and Xi, Q. and Lau, K. T. (2012) Development of composite plate for compact silencer design. Journal of Sound and Vibration, 331 (10). pp. 2348-2364. ISSN 0022-460X

acrylated epoxidized hemp oil

Manthey, Nathan William (2013) Development of hemp oil based bioresins for biocomposites. [Thesis (PhD/Research)] (Unpublished)

activated carbon

Salleh, Zulzamri and Islam, Md Mainul and Yusop, M. Y. M. and Muhamad, M. S. (2013) Tensile behaviours of activated carbon (AC) coconut shell reinforced recycle polyethylene (PET) hybrid composites. In: 12th International Conference on Frontiers of Polymers and Advanced Materials (ICFPAM 2013), 8-13 Dec 2013, Auckland, New Zealand.

additives

Zhuge, Yan (2010) Investigation of the effect of various additives on the strength of environmentally friendly permeable concrete. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

adhesion

Aldousiri, B. and Shalwan, A. and Chin, C. W. (2013) A review on tribological behaviour of polymeric composites and future reinforcements. Advances in Materials Science and Engineering , 2013. pp. 1-8. ISSN 1687-8434

Islam, Md Mainul and Kim, Ho Sung (2012) Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior. Journal of Sandwich Structures and Materials, 14 (1). pp. 111-127. ISSN 1099-6362

Islam, Md Mainul and Kim, Ho Sung (2010) Manufacturing and behaviour of sandwich composites made of starch as binder for core and adhesive between core and skins. In: 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010), 24-26 Sept 2010, Kottayam, Kerala, India.

Islam, Md Mainul and Kim, Ho Sung (2007) Properties and mechanical behaviour of novel sandwich composites made of syntactic foam and paper skin. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

adhesion wear

Yousif, B. F. and Chin, C. W. (2012) Epoxy composite based on kenaf fibers for tribological applications under wet contact conditions. Surface Review and Letters, 19 (5). pp. 1250050-1. ISSN 0218-625X

adhesive wear

Singh, Narish and Yousif, B. F. and Rilling, Dirk (2011) Tribological characteristics of sustainable fibre reinforced thermoplastic composites under wet adhesive wear. Tribology Transactions, 54 (5). 736-748. ISSN 1040-2004

Singh, N. and Yousif, B. F. and Rilling, D. (2011) Adhesive wear of thermoplastic composite based on kenaf fibres. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225 (2). pp. 101-109. ISSN 1350-6501

Singh, Narish and Yousif, B. F. and Rilling, Dirk (2011) Investigations on wear and frictional properties of kenaf fibre polyurethane composites under dry and wet contact conditions. International Journal of Precision Technology, 2 (4). pp. 375-387. ISSN 1755-2060

Yousif, B. F. and Alsofyani, I. M. and Yusaf, Talal (2010) Adhesive wear and frictional characteristics of UHMWPE and HDPE sliding against different counterfaces under dry contact condition. Tribology, 4 (2). pp. 78-85. ISSN 1751-5831

adhesives

Yousif, Belal F. (2012) Adhesive wear characteristics of natural fiber-reinforced composites. In: Wear of advanced materials. John Wiley & Sons, Inc., London, United Kingdom, pp. 61-97. ISBN 978-1-84821-352-4

advanced manufacturing

Ku, H. (2011) The process of updating production engineering in an Australian regional university excellence in developing e-learning. In: 2011 International MultiConference of Engineers and Computer Scientists (IMECS 2011) , 16-18 Mar 2011, Kowloon, Hong Kong.

advanced robust

Awad, Ziad K. and Gonzalez, Felipe and Aravinthan, Thiru (2010) Advanced robust design optimization of FRP sandwich floor panels. IOP Conference Series: Materials Science and Engineering, 10 (1). 012182,1-012182,9. ISSN 1757-899X

AEHO

Manthey, Nathan William (2013) Development of hemp oil based bioresins for biocomposites. [Thesis (PhD/Research)] (Unpublished)

aerogels

Zhuge, Yan (2013) A review of aerogels and their application as a multi-functional building material. Applied Mechanics and Materials, 253-25. pp. 564-567. ISSN 1660-9336

aerospace structures

Kahandawa, Gayan C. and Epaarachchi, Jayantha and Wang, Hao and Lau, K. T. (2012) Use of FBG sensors for SHM in aerospace structures. Photonic Sensors, 2 (3). pp. 203-214. ISSN 1674-9251

AFM

Cheng, Sha and Lau, Kin-Tak and Chen, Shougang and Chang, Xueting and Liu, Tao and Yin, Yansheng (2010) Microscopical observation of the marine bacterium vibrio natriegeus growth on metallic corrosion. Materials and Manufacturing Processes, 25 (5). pp. 293-297. ISSN 1042-6914

agglomeration

Islam, Md Mainul and Kim, Ho Sung (2008) Manufacture of syntactic foams using starch as binder: post-mold processing. Materials and Manufacturing Processes, 23 (8). pp. 884-892. ISSN 1042-6914

aggregate

Hussin, Manal (2012) An investigation into the effect of material composition on the fundamental properties of permeable concrete. [Thesis (PhD/Research)] (Unpublished)

Lian, C. and Zhuge, Y. (2010) Optimum mix design of enhanced permeable concrete: an experimental investigation. Construction and Building Materials, 24 (12). pp. 2664-2671. ISSN 0950-0618

Lian, Chunqi and Zhuge, Yan (2009) Investigation of the effect of aggregate on the performance of permeable concrete. In: Challenges, opportunities, and solutions in structural engineering and construction: ISEC-05 proceedings. Taylor & Francis (CRC Press), United Kingdom, pp. 505-510. ISBN 978-0-415-56809-8

agriculture

Al-Sandooq, J. M. and Yousif, B. F. and Jensen, T. A. (2012) Tribological consideration in roller mill machines for agriculture applications. Surface Review and Letters, 19 (6). pp. 1250065-1. ISSN 0218-625X

AIP refinement

Wang, Hao (2007) In-situ Si/Al composite produced by semisolid metal processing. Materials and Manufacturing Processes, 22 (5-6). pp. 696-699. ISSN 1042-6914

aircraft material

Lau, Alan K. T. and Ho, Mabel M. P. (2011) Recent research trend in natural-fibre composites. JEC Composites (67). pp. 50-52. ISSN 1639-965X

Al-Si alloy

Yao, X. and Wang, H. (2006) Modeling of semisolid structure formation in controlled nucleation method. International Journal of Modern Physics B, 20 (25-27). pp. 4123-4128. ISSN 0217-9792

alkali activation

Yang, Tao and Yao, Xiao and Zhang, Zuhua and Wang, Hao (2012) Mechanical property and structure of alkali-activated fly ash and slag blends. Journal of Sustainable Cement-Based Materials, 1 (4). pp. 167-178. ISSN 2165-0373

alkali treated

Ahmed, Mansur and Islam, Md Saiful and Ahsan, Qumrul and Islam, Md Mainul (2010) Physical and tensile properties of raw and treated silk fibres. In: 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010), 24-26 Sept 2010, Kottayam, Kerala, India.

alkali treatment

Kabir, Mohammad Mazedul and Islam, Md Mainul and Wang, Hao (2013) Mechanical and thermal properties of jute fibre reinforced composites. Journal of Multifunctional Composites, 1 (1). pp. 71-77. ISSN 2168-4246

Kabir, Mohammad Mazedul and Islam, Md Mainul and Wang, Hao (2010) Mechanical and thermal properties of untreated and chemically treated jute fibre reinforced composites. In: ICMIEE 2010: International Conference on Mechanical, Industrial and Energy Engineering , 23-24 Dec 2010, Khulna, Bangladesh.

Wong, K. J. and Yousif, B. F. and Low, K. O. (2010) The effects of alkali treatment on the interfacial adhesion of bamboo fibres. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 224 (3). pp. 139-148. ISSN 1464-4207

alkali-activated materials

Zhu, Huajun and Zhang, Zuhua and Zhu, Yingcan and Tian, Liang (2014) Durability of alkali-activated fly ash concrete: chloride penetration in pastes and mortars. Construction and Building Materials , 65. pp. 51-59. ISSN 0950-0618

alkaline activation

Yang, T. and Yao, X. and Zhang, Z. and Wang, H. (2012) Effects of ground granulated blast furnace slag on the mechanical and microstructure of fly ash-based geopolymer binders. In: 8th Asian-Australasian Conference on Composite Materials, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

alloy

Wang, Hao and Davidson, C. J. and StJohn, David H. (2004) Semisolid microstructural evolution of AlSi7Mg during partial remelting. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing , 368 (1-2). pp. 159-167. ISSN 0921-5093

alloy composition

Wang, Hao (2010) The role of casting temperature in preparation of bulk metallic glasses. In: THERMEC 2009: 6th International Conference on Processing and Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications, 25-29 Aug 2009, Berlin, Germany.

alloys

Etaati, Amir and Dehghani, Kamran (2013) A study on hot deformation behavior of Ni-42.5Ti-7.5Cu alloy. Materials Chemistry and Physics, 140 (1). pp. 208-215. ISSN 0254-0584

Easton, Mark A. and Wang, Hao and Grandfield, John and Davidson, Cameron J. and StJohn, David H. and Sweet, Lisa D. and Couper, Malcolm J. (2012) Observation and prediction of the hot tear susceptibility of ternary Al-Si-Mg alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science , 43 (9). pp. 3227-3238. ISSN 1073-5623

Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275

Wang, Hao and Ning, Zhiliang (2009) Deformation behaviour of aluminium alloy A356 in semisolid state. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Ning, Zhiliang and Wu, Peilian and Wang, Hao and Cao, Fuyang and Sun, Jianfei (2007) Effect of pouring temperature on thixotropic microstructure formation of AZ91. Rare Metals, 26 (S1). pp. 180-184. ISSN 1001-0521

Wang, Hao and Zhang, M. X. and Shi, Z. M. and Yang, Ke (2006) Biocorrosion behaviour of magnesium alloys under pseudo-physiological conditions. Tissue Engineering, 12 (4). p. 1067. ISSN 1076-3279

AlSi7Mgn

Wang, Hao and Davidson, C. J. and StJohn, David H. (2004) Semisolid microstructural evolution of AlSi7Mg during partial remelting. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing , 368 (1-2). pp. 159-167. ISSN 0921-5093

alternative materials

Manalo, A. and Aravinthan, T. and Karunasena, W. and Ticoalu, A. (2010) A review of alternative materials for replacing existing timber sleepers. Composite Structures, 92 (3). pp. 603-611. ISSN 0263-8223

alternative sleeper materials

Ferdous, Wahid and Manalo, Allan (2014) Failures of mainline railway sleepers and suggested remedies – review of current practice. Engineering Failure Analysis, 44. pp. 17-35. ISSN 1350-6307

alumina

Albdiry, Mushtaq and Alethari, Haydar (2012) Effect of alumina inclusions on microstructure and mechanical properties of 62 WC, 32 (Ti-W) C and 6 Co compacts. International Journal of Microstructure and Materials Properties, 7 (4). pp. 329-340. ISSN 1741-8410

Zhu, Yue-Feng and Shi, Lei and Liang, Ji and Hui, David and Lau, Kin-Tak (2008) Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics. Composites Part B: Engineering, 39 (7-8). pp. 1136-1141. ISSN 1359-8368

alumina ceramics

Zhu, Yue-Feng and Shi, Lei and Liang, Ji and Hui, David and Lau, Kin-Tak (2008) Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics. Composites Part B: Engineering, 39 (7-8). pp. 1136-1141. ISSN 1359-8368

aluminium fiber

Epaarachchi, J. and Ku, H. and Gohel, K. (2010) A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites. Journal of Composite Materials, 44 (6). pp. 779-788. ISSN 0021-9983

aluminium powder

Epaarachchi, Jayantha A. and Reushle, Matthew T. (2010) Performance of aluminium/vinylester particulate composite. In: PRICM7: 7th Pacific Rim International Conference on Advanced Materials and Processing, 2-6 Aug 2010, Cairns, Australia.

aluminium-silicon alloy

Wang, Hao (2007) In-situ Si/Al composite produced by semisolid metal processing. Materials and Manufacturing Processes, 22 (5-6). pp. 696-699. ISSN 1042-6914

aluminosilicates

Yang, Tao and Yao, Xiao and Zhang, Zuhua and Wang, Hao (2012) Mechanical property and structure of alkali-activated fly ash and slag blends. Journal of Sustainable Cement-Based Materials, 1 (4). pp. 167-178. ISSN 2165-0373

aluminum

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

aluminum casting

Easton, Mark A. and Wang, Hao and Grandfield, John and Davidson, Cameron J. and StJohn, David H. and Sweet, Lisa D. and Couper, Malcolm J. (2012) Observation and prediction of the hot tear susceptibility of ternary Al-Si-Mg alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science , 43 (9). pp. 3227-3238. ISSN 1073-5623

amorphous matrices

Zhu, Z. W. and Zhang, H. F. and Wang, Hao and Ding, B. Z. and Hu, Z. Q. and Huang, Han (2009) Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting. Journal of Materials Research, 24 (10). pp. 3108-3115. ISSN 0884-2914

analysis

Awad, Ziad K. and Yusaf, Talal F. (2011) Finite element analysis of fibre reinforce concrete beam subject to high temperature by using EURO-code models. In: ICCST8: 8th International Conference on Composite Science and Technology, 22-24 Mar 2011, Kuala Lumpur, Malaysia.

analytical chemistry

Dohnal, Ludek and Faigl, Paul (2006) Classical or 'robust' linear regression? [Klasická nebo robustní lineární regrese?]. In: 9th Yearly Seminar on Securing Quality of Analytical Results, 27-29 Mar 2006, Komorni Lhotka, Czech Republic.

analytical modelling

Islam, Md Mainul and Kim, Ho Sung (2007) Manufacture of syntactic foams: pre-mold processing. Materials and Manufacturing Processes, 22 (1). pp. 28-36. ISSN 1042-6914

Islam, Md Mainul and Kim, Ho Sung (2007) Syntactic foams consolidated with starch: modelling for pre-mould processing. Advanced Materials Research, 29-30. pp. 165-168. ISSN 1022-6680

Islam, Md Mainul and Kim, Ho Sung (2006) Syntactic foams consolidated with starch: modelling for pre-mould processing. In: 4th International Conference on Advanced Materials & Processing (ICAMP-4), 10-13 Dec 2006, Hamilton, New Zealand.

analytical predictions

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

analytical results

Epaarachchi, J. and Ku, H. and Gohel, K. (2010) A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites. Journal of Composite Materials, 44 (6). pp. 779-788. ISSN 0021-9983

angle measurement

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

animal fibre

Ho, Mei-po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

annealing

Mo, Chun-li and Li, Qiang and Guo, Xu-ming and Wang, Hao (2012) Numerical simulation the temperature field of the multi-coil batch during annealing process in Bell-type furnace. Advanced Materials Research, 538-54. pp. 637-641. ISSN 1022-6680

applications

Aravinthan, T. (2012) Composites in civil infrastructure – R&D to applications. In: 6th International Composites Conference (ACUN 6): Composites and Nanocomposites in Civil, Offshore and Mining Infrastructure , 14-16 Nov 2012, Melbourne, Australia.

Araldite

Ku, H. S. (2008) Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation. Journal of Electromagnetic Waves and Applications, 22 (1). pp. 69-84. ISSN 0920-5071

Araldite and carbon fibre

Ku, Harry S. and Yusaf, Talal (2008) Processing of composites using variable and fixed frequency microwave facilities. Progress in Electromagnetic Research B, PIERB . pp. 185-205. ISSN 1937-6472

arenga pinnata

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2013) A review on the characteristics of gomuti fibre and its composites with thermoset resins. Journal of Reinforced Plastics and Composites, 32 (2). pp. 124-136. ISSN 0731-6844

arenga pinnata fibre

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2011) Experimental investigation into gomuti fibres/polyester composites. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

articular cartilages

Lau, Kin-tak and Ho, Mei-po and Au-Yeung, Chi-ting and Cheung, Hoi-yan (2010) Biocomposites: their multifunctionality. International Journal of Smart and Nano Materials, 1 (1). pp. 13-27. ISSN 1947-5411

articulation

Morgan, M. J. and Fulcher, R. L. and Ku, H. S. (1998) Articulation, credit transfer and flexible delivery of engineering degree courses: Australia, Malaysia and Hong Kong. Jurutera: Institution of Engineers Malaysia Monthly Bulletin, 1998 (1). pp. 57-67. ISSN 0126-513X

artificial neural network

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2013) Development of artificial neural network model in predicting performance of the smart wind turbine blade. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

artificial neural networks

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. and Lau, K. T. (2012) Optimized FBG sensor network for efficient detection of a delamination in FRP structures. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

as-cast

Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275

AS1684

Karunasena, W. and Leitch, C. J. (2009) Investigation on role and function of noggings in residential timber frame construction. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

assessment

Manalo, Allan and Aravinthan, Thiru (2012) Peer assisted learning in an online postgraduate course on engineered fibre composites. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

asymmetrical beam

Manalo, A. C. (2013) The effect of shear span-to-depth ratio and test set-up on the behavior of fibre composite sandwich structure. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 Dec 2013, Melbourne, Australia .

Manalo, A. C. (2013) Behaviour of fibre composite sandwich structures under short and asymmetrical beam shear tests. Composite Structures, 99. pp. 339-349. ISSN 0263-8223

asymmetrical beam shear test

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) In-plane shear behaviour of fibre composite sandwich beams using asymmetrical beam shear test. Construction and Building Materials, 24 (10). pp. 1952-1960. ISSN 0950-0618

asymmetrical beams

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Warna (2010) Shear behavior of glue-laminated composite sandwich beams. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

atomic force microscopes

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

Australia

Ross, Pauline and McGowan, Carol G. and Styger, Lee E. J. (2012) A comparison of theory and practice in market intelligence gathering for Australian micro-businesses and SMEs. In: 19th International Business Research Conference, 19-21 Nov 2012, Melbourne, Australia .

Khattak, Hamid and Ku, Harry and Goh, Steven (2012) Courses for teaching leadership capacity in professional engineering degrees in Australia and Europe. European Journal of Engineering Education, 37 (3). pp. 279-296. ISSN 0304-3797

Charles, Michael and Furneaux, Craig and Pillay, Janet and Thorpe, David and Parades Castello, Cynthya and Brown, Kerry (2007) Uptake of an OHS Code of Practice by Australian construction firms. In: CIB World Building Congress 2007: Construction for Development, 14-17 May 2007, Cape Town, South Africa.

Australian

Charles, Michael and Furneaux, Craig and Pillay, Janet and Thorpe, David and Parades Castello, Cynthya and Brown, Kerry (2007) Uptake of an OHS Code of Practice by Australian construction firms. In: CIB World Building Congress 2007: Construction for Development, 14-17 May 2007, Cape Town, South Africa.

automobile parts

Nirmal, Umar and Hashim, Jamil and Rilling, Dirk and Brevern, P. V. and Yousif, B. F. (2013) Tribo performance of T-BFRP composite subjected to dry/wet contact conditions. In: Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Advances in Materials Science (2). Apple Academic Press, Toronto, Canada, pp. 311-326. ISBN 978-1-926895-16-1

axial

Guades, E. J. and Sirimanna, C. S. and Aravinthan, T. and Islam, M. M. (2011) Behaviour of fibre composite pile under axial compression load. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

back-propagation

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2013) Development of artificial neural network model in predicting performance of the smart wind turbine blade. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

backpack load

Lau, Sindy Mei-Ling and Lau, Kin-Tak and Yin, Yan-Sheng and Li, Lan and Wong, May and Chan, Kevin and Chen, William (2010) A shape memory alloy energy absorber for backpack design. Materials and Manufacturing Processes, 25 (4). pp. 281-286. ISSN 1042-6914

bamboo

Manalo, A. C. and Karunasena, W. and Lau, K. T. (2013) Mechanical properties of bamboo fiber-polyester composites. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

bamboo charcoal

Ho, M. P. and Wang, H. and Lau, K. T. and Jayaraman, K. and Bhattacharyya, D. (2012) Mechanical properties of a bamboo charcoal reinforced polylactic acid composite. In: 8th Asian-Australasian Conference on Composite Materials: Enabling Tomorrow's Industry Toda (ACCM 8), 6-8 Nov 2012, Kuala Lumpur, Malaysia.

bamboo fibres

Wong, K. J. and Yousif, B. F. and Low, K. O. (2010) The effects of alkali treatment on the interfacial adhesion of bamboo fibres. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 224 (3). pp. 139-148. ISSN 1464-4207

barnacles

Ismail, S. B. and Salleh, Z. and Yusop, M. Y.M. and Fakhruradzi, F. H. (2013) Monitoring of barnacle growth on the underwater hull of an FRP boat using image processing. In: 4th International Conference on Computational Systems-Biology and Bioinformatics, CSBio 2013, 7-9 Nov 2013, Seoul; South Korea.

bast fibre

Kabir, M. M. and Wang, H. and Cardona, F. and Aravinthan, T. (2011) Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

batch reactor

Cooney, T. I. and Cardona, F. and Tran-Cong, T. (2011) Kinetics of in situ epoxidation of hemp oil under heterogeneous reaction conditions: an overview with preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27-29 Apr 2011, Brisbane, Australia.

batteries

Helwig, Andreas and Ahfock, Tony L. (2009) Ultra-capacitor assisted battery storage for remote area power supplies: a case study. In: AUPEC 2009: Sustainable Energy Technologies and Systems, 27-30 Sept 2009, Adelaide, South Australia.

battery storage

Helwig, Andreas and Ahfock, Tony L. (2009) Ultra-capacitor assisted battery storage for remote area power supplies: a case study. In: AUPEC 2009: Sustainable Energy Technologies and Systems, 27-30 Sept 2009, Adelaide, South Australia.

beam

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2010) Investigation of frequency characteristics of GFRP/phenolic sandwich beams. In: 2010 Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

beam cross section

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

beam tests

Wang, Bo and Teng, J. G. and De Lorenzis, Laura and Zhou, Li-Min and Ou, Jinping and Jin, Wei and Lau, K. T. (2009) Strain monitoring of RC members strengthened with smart NSM FRP bars. Construction and Building Materials, 23 (4). pp. 1698-1711. ISSN 0950-0618

beams

Van Erp, Gerard and Cattell, Craig and Heldt, Tim (2005) Fibre composite structures in Australia's civil engineering market: an anatomy of innovation. Structural Control and Health Monitoring, 7 (3). pp. 150-160. ISSN 1365-0556

beams and girders

Wang, Bo and Teng, J. G. and De Lorenzis, Laura and Zhou, Li-Min and Ou, Jinping and Jin, Wei and Lau, K. T. (2009) Strain monitoring of RC members strengthened with smart NSM FRP bars. Construction and Building Materials, 23 (4). pp. 1698-1711. ISSN 0950-0618

behaviour

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2010) Temperature effects on full scale FRP bridge using innovative composite components. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

Ning, Zhiliang and Wu, Peilian and Wang, Hao and Cao, Fuyang and Sun, Jianfei (2007) Effect of pouring temperature on thixotropic microstructure formation of AZ91. Rare Metals, 26 (S1). pp. 180-184. ISSN 1001-0521

bell-type furnace

Mo, Chun-li and Li, Qiang and Guo, Xu-ming and Wang, Hao (2012) Numerical simulation the temperature field of the multi-coil batch during annealing process in Bell-type furnace. Advanced Materials Research, 538-54. pp. 637-641. ISSN 1022-6680

bending

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2009) Flexural behaviour of laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

bending behaviour

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Manalo, Allan (2013) Geometry and restraint effects on the bending behaviour of the glass fibre reinforced polymer sandwich slabs under point load. Materials and Design, 45. pp. 125-134. ISSN 0264-1275

bending stiffness

Choy, Y. S. and Liu, Y. and Cheung, H. Y. and Xi, Q. and Lau, K. T. (2012) Development of composite plate for compact silencer design. Journal of Sound and Vibration, 331 (10). pp. 2348-2364. ISSN 0022-460X

Choy, Y. S. and Liu, Y. and Lau, K. T. (2012) Duct noise control by using very light composite plate. Advanced Materials Research, 410. pp. 361-365. ISSN 1022-6680

bending strength

Ku, H. and Trada, M. and Nixon, R. and Wong, P. (2010) Flexural properties of phenolic resin reinforced with glass powder: preliminary results. Journal of Applied Polymer Science, 116 (1). pp. 347-354. ISSN 0021-8995

bending stress

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2011) The implementation of statistical inference to study the bending strength of sustainable hybrid sandwich panel composite. In: CEABM 2011: 1st International Conference on Civil Engineering, Architecture and Building Materials, 18-20 Jun 2011, Haikou, China.

betelnut fibre

Nirmal, Umar and Jamil, Nadia and Yousif, B. F. and Rilling, Dirk and Brevern, P. V. (2010) The potential of using treated betelnut fibres as reinforcement for tribo-bio polymeric composites subjected to dry/wet contact conditions. In: ICNP 2010: Macro to Nano Scales, 24-26 Sep 2010, Kottayam, India.

betelnut fibres

Yousif, B. F. and Nirmal, Umar and Wong, K. J. (2010) Three-body abrasion on wear and frictional performance of treated betelnut fibre reinforced epoxy (T-BFRE) composite. Materials and Design, 31 (9). pp. 4514-4521. ISSN 0264-1275; 0261-3069

binary composites

Guo, Qing Bing and Lau, Kin-Tak and Rong, Min Zhi and Zhang, Ming Qiu (2010) Optimization of tribological and mechanical properties of epoxy through hybrid filling. Wear, 269 (1-2). pp. 13-20. ISSN 0043-1648

bio composite

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2010) A review of current development in natural fiber composites for structural and infrastructure applications. In: Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

bio composites

Cheung, Hoi-Yan and Lau, Kin-tak and Tao, Xiao-Ming and Hui, David (2008) A potential material for tissue engineering: silkworm silk/PLA biocomposite. Composites Part B: Engineering, 39 (6). pp. 1026-1033. ISSN 1359-8368

bio-composites

Cardona, Francisco (2012) Bio-resins: new structural renewable materials for bio-composite applications. In: 4th KKU International Engineering Conference: Driving Together Towards ASEAN Economic Community (KKU-IENC 2012) , 10-12 May 2012, Khon Kaen University, Thailand.

bio-corrosion

Wang, H. and Estrin, Y. and Fu, H. M. and Song, G. L. and Zuberova, Z. (2007) The effect of pre-processing and grain structure on the bio-corrosion and fatigue resistance of magnesium alloy AZ31. Advanced Engineering Materials, 9 (11). pp. 967-972. ISSN 1438-1656

Ren, Yibin and Huang, Jingjing and Yang, Ke and Zhang, Bingchun and Yao, Zhiming and Wang, Hao (2005) Study of bio-corrosion of pure magnesium. Acta Metallurgica Sinica (Jinshu Xuebao), 41 (11). pp. 1228-1232. ISSN 0412-1961

bio-degradability

Ho, Mei-Po (2012) Strengthening mechanism and bio-degradability of a silk-based polymer composite. [Thesis (PhD/Research)] (Unpublished)

bio-engineering

Lau, Kin-Tak and Cheung, Hoi-Yan and Lu, Jian Ping and Yin, Yan-Sheng and Hui, David and Li, Hu-Lin (2008) Carbon nanotubes for space and bio-engineering applications. Journal of Computational and Theoretical Nanoscience, 5 (1). pp. 23-35. ISSN 1546-1955

bio-materials

Lau, Kin-Tak and Cheung, Hoi-Yan and Lu, Jian Ping and Yin, Yan-Sheng and Hui, David and Li, Hu-Lin (2008) Carbon nanotubes for space and bio-engineering applications. Journal of Computational and Theoretical Nanoscience, 5 (1). pp. 23-35. ISSN 1546-1955

bio-medical

Ho, Mei-po and Wang, Hao and Ho, Chun-kit and Lau, Kin-tak (2012) A study on the dynamic mechanical properties of silk fibre composites. Advanced Materials Research, 410. pp. 106-109. ISSN 1022-6680

Ho, Mei-po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

bio-resins

Cardona, Francisco (2012) Bio-resins: new structural renewable materials for bio-composite applications. In: 4th KKU International Engineering Conference: Driving Together Towards ASEAN Economic Community (KKU-IENC 2012) , 10-12 May 2012, Khon Kaen University, Thailand.

biochemistry

Dohnal, Ludek and Faigl, Paul (2006) Classical or 'robust' linear regression? [Klasická nebo robustní lineární regrese?]. In: 9th Yearly Seminar on Securing Quality of Analytical Results, 27-29 Mar 2006, Komorni Lhotka, Czech Republic.

biocompatibility

Ho, Mei-po and Wang, Hao and Lau, Kin-tak (2012) Effect of degumming time on silkworm silk fibre for biodegradable polymer composites. Applied Surface Science, 258 (8). pp. 3948-3955. ISSN 0169-4332

Chen, Wei and Wang, Hao and Zhang, Lei and Tang, Xiushan (2009) Development of hot drawing process for nitinol tube. International Journal of Modern Physics B, 23 (6/7). pp. 1968-1974. ISSN 0217-9792

biocomposite

Francucci, G. and Manthey, N. W. and Cardona, F. and Aravinthan, T. (2014) Processing and characterization of 100% hemp-based biocomposites obtained by vacuum infusion. Journal of Composite Materials , 48 (11). pp. 1323-1335. ISSN 0021-9983

Manthey, Nathan W. and Cardona, Francisco and Francucci, Gaston and Aravinthan, Thiru (2013) Thermo-mechanical properties of epoxidized hemp oil-based bioresins and biocomposites. Journal of Reinforced Plastics and Composites , 32 (19). pp. 1444-1456. ISSN 0731-6844

Manthey, Nathan W. and Cardona, Francisco and Francucci, Gaston M. and Aravinthan, Thiru (2012) Green building materials: hemp oil based biocomposites. In: 2012 World Academy of Science, Engineering and Technology Conference (WASET 2012), 24-25 Oct 2012, Bali, Indonesia.

Manthey, N. W. and Cardona, F. and Aravinthan, T. (2011) Mechanical properties of epoxidized hemp oil based biocomposites: preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27 -29 Apr 2011, Brisbane, Australia.

Lau, Kin-tak and Ho, Mei-po and Au-Yeung, Chi-ting and Cheung, Hoi-yan (2010) Biocomposites: their multifunctionality. International Journal of Smart and Nano Materials, 1 (1). pp. 13-27. ISSN 1947-5411

biocomposites

Manthey, Nathan William (2013) Development of hemp oil based bioresins for biocomposites. [Thesis (PhD/Research)] (Unpublished)

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2011) Experimental investigation into gomuti fibres/polyester composites. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Zhao, Yong-Qing and Cheung, Hoi-Yan and Lau, Kin-Tak and Xu, Cai-Ling and Zhao, Dan-Dan and Li, Hu-Lin (2010) Silkworm silk/poly(lactic acid) biocomposites: dynamic mechanical, thermal and biodegradable properties. Polymer Degradation and Stability, 95 (10). pp. 1978-1987. ISSN 0141-3910

biocorrosion

Wang, Hao and Zhang, M. X. and Shi, Z. M. and Yang, Ke (2006) Biocorrosion behaviour of magnesium alloys under pseudo-physiological conditions. Tissue Engineering, 12 (4). p. 1067. ISSN 1076-3279

biocorrosion behaviour

Wang, H. and Shi, Z. M. and Yang, K. (2008) Magnesium and magnesium alloys as degradable metallic biomaterials. In: FMST 2008: 4th International Conference on Frontiers in Materials Science and Technology, 26-28 Mar 2008, Brisbane, Australia.

biodegradable

Yousif, Belal F. and Islam, Md Mainul and Salit, Mohd Sapuan (2013) Sustainable composites [Editorial]. Advances in Materials Science and Engineering. ISSN 1687-8434

biodegradable material

Yousif, Belal F. (2012) Adhesive wear characteristics of natural fiber-reinforced composites. In: Wear of advanced materials. John Wiley & Sons, Inc., London, United Kingdom, pp. 61-97. ISBN 978-1-84821-352-4

biodegradable materials

Nirmal, Umar and Hashim, Jamil and Rilling, Dirk and Brevern, P. V. and Yousif, B. F. (2013) Tribo performance of T-BFRP composite subjected to dry/wet contact conditions. In: Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Advances in Materials Science (2). Apple Academic Press, Toronto, Canada, pp. 311-326. ISBN 978-1-926895-16-1

Wang, H. and Shi, Z. M. and Yang, K. (2008) Magnesium and magnesium alloys as degradable metallic biomaterials. In: FMST 2008: 4th International Conference on Frontiers in Materials Science and Technology, 26-28 Mar 2008, Brisbane, Australia.

biodegradable plastic

Ho, Mei-po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

biodegradable plastics

Ho, Mei-po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

biodegradable properties

Zhao, Yong-Qing and Cheung, Hoi-Yan and Lau, Kin-Tak and Xu, Cai-Ling and Zhao, Dan-Dan and Li, Hu-Lin (2010) Silkworm silk/poly(lactic acid) biocomposites: dynamic mechanical, thermal and biodegradable properties. Polymer Degradation and Stability, 95 (10). pp. 1978-1987. ISSN 0141-3910

biodegradation

Ho, Mei-po and Wang, Hao and Lau, Kin-tak (2012) Effect of degumming time on silkworm silk fibre for biodegradable polymer composites. Applied Surface Science, 258 (8). pp. 3948-3955. ISSN 0169-4332

biofilm

Cheng, Sha and Lau, Kin-Tak and Chen, Shougang and Chang, Xueting and Liu, Tao and Yin, Yansheng (2010) Microscopical observation of the marine bacterium vibrio natriegeus growth on metallic corrosion. Materials and Manufacturing Processes, 25 (5). pp. 293-297. ISSN 1042-6914

biomaterial

Ren, Yibin and Huang, Jingjing and Yang, Ke and Zhang, Bingchun and Yao, Zhiming and Wang, Hao (2005) Study of bio-corrosion of pure magnesium. Acta Metallurgica Sinica (Jinshu Xuebao), 41 (11). pp. 1228-1232. ISSN 0412-1961

biomaterials

Wang, H. and Shi, Z. M. and Yang, K. (2008) Magnesium and magnesium alloys as degradable metallic biomaterials. In: FMST 2008: 4th International Conference on Frontiers in Materials Science and Technology, 26-28 Mar 2008, Brisbane, Australia.

biomechanical surrogate

Thota, Narasimha Murthy and Eepaarachchi, Jayantha A. and Lau, K. T. (2012) Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study. In: 7th Australasian Congress on Applied Mechanics (ACAM 7), 9-12 Dec 2012, Adelaide, Australia.

biopolymers

Francucci, Gaston and Cardona, Francisco and Manthey, Nathan W. (2013) Cure kinetics of an acrylated epoxidized hemp oil-based bioresin system. Journal of Applied Polymer Science, 128 (3). pp. 2030-2037. ISSN 0021-8995

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru (2012) Cure kinetic study of epoxidized hemp oil cured with a multiple catalytic system. Journal of Applied Polymer Science, 125 (S2). E511-E517. ISSN 0021-8995

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru and Cooney, Tyson (2011) Cure kinetics of an epoxidized hemp oil based bioresin system. Journal of Applied Polymer Science, 122 (1). pp. 444-451. ISSN 0021-8995

Doherty, William and Halley, Peter J. and Edye, Les and Rogers, David and Cardona, Francisco and Park, Yosup and Woo, Tim (2007) Studies on polymers and composites from lignin and fiber derived from sugar cane. Polymers for Advanced Technologies, 18 (8). pp. 673-678. ISSN 1042-7147

bioresin

Manthey, N. W. and Cardona, F. and Aravinthan, T. (2011) Mechanical properties of epoxidized hemp oil based biocomposites: preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27 -29 Apr 2011, Brisbane, Australia.

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2011) Natural fibre composites with QLD based fibres and vegetable oils. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

bioresins

Manthey, Nathan William (2013) Development of hemp oil based bioresins for biocomposites. [Thesis (PhD/Research)] (Unpublished)

bioresorbability

Lau, Kin-tak and Ho, Mei-po and Au-Yeung, Chi-ting and Cheung, Hoi-yan (2010) Biocomposites: their multifunctionality. International Journal of Smart and Nano Materials, 1 (1). pp. 13-27. ISSN 1947-5411

bioresorbable polymers

Lau, Kin-tak and Ho, Mei-po and Au-Yeung, Chi-ting and Cheung, Hoi-yan (2010) Biocomposites: their multifunctionality. International Journal of Smart and Nano Materials, 1 (1). pp. 13-27. ISSN 1947-5411

blast simulation

Wei, Riyu and Zhang, Sheng and Karunasena, Warna and Sivakugan, Nagaratnam and Zhang, Hongwu (2007) Blast simulation in underground mines using the combined finite-discrete element method. In: 7th WSEAS International Conference on Simulation, Modelling and Optimization (SMO '07), 15-17 September 2007, Beijing, China.

block loading

Epaarachchi, Jayantha A. (2006) A study of estimation of damage accumulation of glass fibre reinforce plastic (GFRP) composites under a block loading situation. Composite Structures, 75 (1-4). pp. 88-92. ISSN 0263-8223

blunt thoracic trauma

Thota, Narasimha M. and Epaarachchi, Jayantha A. and Lau, Kin-tak (2013) Effect of the energy absorbing mechanisms on the blunt thoracic trauma caused by a typical foam projectile. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

blunt trauma

Thota, Narasimha Murthy and Eepaarachchi, Jayantha A. and Lau, K. T. (2012) Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study. In: 7th Australasian Congress on Applied Mechanics (ACAM 7), 9-12 Dec 2012, Adelaide, Australia.

BMG composites

Fu, H. M. and Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2006) In situ TiB-reinforced cu-based bulk metallic glass composites. Scripta Materialia, 54 (11). pp. 1961-1966. ISSN 1359-6462

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2006) In-situ Cu-based bulk metallic glass composite. International Journal of Modern Physics B, 20 (25-27). pp. 3963-3968. ISSN 0217-9792

BMG matrix composites

Wang, Hao (2010) The role of casting temperature in preparation of bulk metallic glasses. In: THERMEC 2009: 6th International Conference on Processing and Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications, 25-29 Aug 2009, Berlin, Germany.

Fu, H. M. and Zhang, H. F. and Wang, Hao and Zhang, Qingsheng and Hu, Z. Q. (2005) Synthesis and mechanical properties of Cu-based bulk metallic glass composites containing in-situ TiC particles. Scripta Materialia, 52 (7). pp. 669-673. ISSN 1359-6462

bolted joint

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2013) Effect of eccentricity on the behavior of pultruded FRP bolted joint. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

bolted joints

Manalo, Allan and Mutsuyoshi, Hiroshi (2012) Behavior of fiber-reinforced composite beams with mechanical joints. Journal of Composite Materials, 46 (4). pp. 483-496. ISSN 0021-9983

Manalo, A. C. and Mutsuyoshi, H. and Asamoto, S. and Aravinthan, T. and Matsui, T. (2009) Mechanical behavior of hybrid FRP composites with bolted joints. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Bombyx mori

Ho, Mei-Po (2012) Strengthening mechanism and bio-degradability of a silk-based polymer composite. [Thesis (PhD/Research)] (Unpublished)

bond strength

Zhu, Huajun and Zhang, Zuhua and Deng, Fenggan and Cao, Yalong (2013) The effects of phase changes on the bonding property of geopolymer to hydrated cement. Construction and Building Materials, 48. pp. 124-130. ISSN 0950-0618

bonded AFRP sheets

Shinozaki, H. and Pandey, G. R. and Mutsuyoshi, H. and Aravinthan, T. (2009) AFRP retrofitting of RC structures in Japan. In: ACMSM20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

bonded joints

Manalo, Allan and Mutsuyoshi, Hiroshi (2012) Behavior of fiber-reinforced composite beams with mechanical joints. Journal of Composite Materials, 46 (4). pp. 483-496. ISSN 0021-9983

bonding

Yan, Zili and Zhang, Jianchun and Zhang, Hua and Wang, Hao (2013) Improvement of mechanical properties of noil hemp fiber reinforced polypropylene composites by resin modification and fiber treatment. Advances in Materials Science and Engineering. pp. 1-7. ISSN 1687-8434

bonding materials

Zhu, Huajun and Zhang, Zuhua and Deng, Fenggan and Cao, Yalong (2013) The effects of phase changes on the bonding property of geopolymer to hydrated cement. Construction and Building Materials, 48. pp. 124-130. ISSN 0950-0618

bone

Lau, Mei-Ling and Lau, Kin-Tak and Ku, Harry and Bahattacharyya, Debes and Yao, Yan-Dong (2012) Measurements of heat treatment effects on bovine cortical bones by nanoindentation and compression testing. Journal of Biomaterials and Nanobiotechnology, 3 (1). pp. 105-113. ISSN 2158-7027

bone implant

Ho, Mei-po and Wang, Hao and Ho, Chun-kit and Lau, Kin-tak (2012) A study on the dynamic mechanical properties of silk fibre composites. Advanced Materials Research, 410. pp. 106-109. ISSN 1022-6680

bone properties

Lau, Mei-ling and Lau, Kin-tak and Yao Yeo, Yan-Dong and Au Yeung, Chi-ting and Lee, Joong-hee (2010) Measurement of bovine bone properties through surface indentation technique. Materials and Manufacturing Processes, 25 (5). pp. 324-328. ISSN 1042-6914

bone repair

Lau, Kin-tak and Ho, Mei-po and Au-Yeung, Chi-ting and Cheung, Hoi-yan (2010) Biocomposites: their multifunctionality. International Journal of Smart and Nano Materials, 1 (1). pp. 13-27. ISSN 1947-5411

bone tissue engineering

Chen, Ling and Tang, Chak Yin and Ku, Harry Siu Lung and Chen, Da Zhu and Tsui, Chi Pong (2013) Surface coating of poly-D-L-lactide/nano-hydroxyapatite composite scaffolds for dexamethasone-releasing function and wettability enhancement. In: Materials Science and Technology Conference (MS&T 2012): Next Generation Biomaterials and Surface Properties of Biomaterials , 27-31 Oct 2012, Pittsburgh, PA. United States.

boundary conditions

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2010) Investigation of frequency characteristics of GFRP/phenolic sandwich beams. In: 2010 Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

bovine cortical bone

Lau, Mei-ling and Lau, Kin-tak and Ku, Harry and Bahattacharyya, Debes and Lee, Joong-Hee (2012) Assessing heat-treatment effects on bovine cortical bones by nanoindentation. In: PFAM 20: 20th International Symposium on Processing and Fabrication of Advanced Materials , 15-18 Dec 2011, Hong Kong.

box beam

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2012) A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials and Design, 33 (1). pp. 534-544. ISSN 0264-1275

Bragg wavelength

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

bridge

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2010) Temperature effects on full scale FRP bridge using innovative composite components. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

Aravinthan, Thiru (2006) Is external post-tensioning an effective solution for shear strengthening of bridge elements? In: Structural Faults + Repair 2006: Eleventh International Conference on ‘Extending the Life of Bridges Concrete + Composites Buildings, Masonry + Civil Structures', 13-15 June 2006, Edinburgh, UK.

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2005) Overview of external post-tensioning in bridges. In: 2005 Southern Region Engineering Conference: Managing Resources for a Sustainable Future (SREC 2005), 15 Oct 2005, Toowoomba, Australia.

bridge design

Lokuge, Weena and Setunge, Sujeeva (2013) Evaluating disaster resilience of bridge infrastructure when exposed to extreme natural events. In: 3rd International Conference on Building Resilience 2013: Individual, Institutional and Societal Coping Strategies to Address the Challenges Associated with Disaster Risk, 17-19 Sep 2013, Heritance Ahungalla, Sri Lanka .

bridge girder

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2012) A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials and Design, 33 (1). pp. 534-544. ISSN 0264-1275

bridge girders

Epaarachchi, J. A. and Karunasena, W. and Aravinthan, T. (2009) Dynamic behavior of hybrid composite bridge girder. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

bridge repair

Shinozaki, H. and Pandey, G. R. and Mutsuyoshi, H. and Aravinthan, T. (2009) AFRP retrofitting of RC structures in Japan. In: ACMSM20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

bridges

Manalo, Allan and Maranan, Ginghis and Van Erp, Gerard (2013) Glue-laminated composite sandwich beams for structural engineering and construction. In: Thirteenth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC13), 11-13 Sept 2013, Sapporro, Japan.

Lokuge, Weena and Setunge, Sujeeva (2013) Evaluating disaster resilience of bridge infrastructure when exposed to extreme natural events. In: 3rd International Conference on Building Resilience 2013: Individual, Institutional and Societal Coping Strategies to Address the Challenges Associated with Disaster Risk, 17-19 Sep 2013, Heritance Ahungalla, Sri Lanka .

Aravinthan, Thiru and Manalo, Allan (2012) Field applications and case studies of FRP in civil infrastructure: the Australian experience. In: 6th International Conference on FRP Composites in Civil Engineering (CICE 2012) , 13-15 Jun 2012, Rome, Italy.

Aravinthan, Thiru (2012) Research and development of fibre composites in civil infrastructure - the Australian experience [Keynote address]. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Aravinthan, T. and Heldt, T. (2010) Innovative strengthening technique using post-tensioned fibre composite wraps for bridge headstocks. Australian Journal of Structural Engineering, 11 (2). pp. 117-128. ISSN 1328-7982

Shinozaki, H. and Pandey, G. R. and Mutsuyoshi, H. and Aravinthan, T. (2009) AFRP retrofitting of RC structures in Japan. In: ACMSM20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Suntharavadivel, T. G. and Aravinthan, T. (2008) Strengthening of shear damaged RC beams with external clamping. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2006) Effect of existing cracks in concrete bridge members strengthened by external post-tensioning. In: FIB 2006: 2nd Congress (Federation Internationale du Beton), 5-8 Jun 2006, Naples, Italy.

Aravinthan, Thiru (2006) Is external post-tensioning an effective solution for shear strengthening of bridge elements? In: Structural Faults + Repair 2006: Eleventh International Conference on ‘Extending the Life of Bridges Concrete + Composites Buildings, Masonry + Civil Structures', 13-15 June 2006, Edinburgh, UK.

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2005) Overview of external post-tensioning in bridges. In: 2005 Southern Region Engineering Conference: Managing Resources for a Sustainable Future (SREC 2005), 15 Oct 2005, Toowoomba, Australia.

Van Erp, Gerard and Cattell, Craig and Heldt, Tim (2005) Fibre composite structures in Australia's civil engineering market: an anatomy of innovation. Structural Control and Health Monitoring, 7 (3). pp. 150-160. ISSN 1365-0556

brittleness

Lokuge, Weena P. and Sanjayan, J. G. and Setunge, Sujeeva (2005) Stress-strain model for laterally confined concrete. Journal of Materials in Civil Engineering, 17 (6). pp. 607-616. ISSN 0899-1561

broadband light sources

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

buckling theory

Goh, S. and Ku, H. and Ang, S. L. (2008) Prediction of crushing stress in composite materials. Journal of Composite Materials, 42 (5). pp. 467-484. ISSN 0021-9983

building

Thorpe, David and Ryan, Neal and Charles, Michael (2008) Environmental sustainability - a driver for innovation in construction SMEs? In: 3rd International Conference of the CRC for Construction Innovation: Clients Driving Innovation: Benefiting from Innovation, 12-14 March 2008, Gold Coast, Australia.

building construction

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2013) Significance analysis of flexural behaviour of hybrid sandwich panels. Open Journal of Civil Engineering, 3 (3B). pp. 1-7. ISSN 2164-3164

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2013) Hybrid sandwich panel with natural fibre composite intermediate layer: Manufacturing process and significance analysis. Malaysian Journal of Civil Engineering, 25 (Special issue 1). pp. 95-111.

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2012) New concept for optimal application of natural fibre reinforced plastic (NFRP) in building construction. In: APSEC-ICCER 2012: Sustaining the World with Better Structures and Construction Practice, 2-4 Oct 2012, Surabaya, Indonesia.

building materials

Nirmal, Umar and Hashim, Jamil and Rilling, Dirk and Brevern, P. V. and Yousif, B. F. (2013) Tribo performance of T-BFRP composite subjected to dry/wet contact conditions. In: Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Advances in Materials Science (2). Apple Academic Press, Toronto, Canada, pp. 311-326. ISBN 978-1-926895-16-1

Wang, Bo and Teng, J. G. and De Lorenzis, Laura and Zhou, Li-Min and Ou, Jinping and Jin, Wei and Lau, K. T. (2009) Strain monitoring of RC members strengthened with smart NSM FRP bars. Construction and Building Materials, 23 (4). pp. 1698-1711. ISSN 0950-0618

Kim, Ho Sung and Islam, Md Mainul (2009) Syntactic foams as building materials consisting of inorganic hollow microspheres and starch binder. In: Building materials: properties, performance and applications. Nova Science Publishers, Inc., New York, USA. ISBN 978-1-60741-082-9

bulk amorphous alloy

Liu, W. Y. and Zhang, H. F. and Hu, Z. Q. and Wang, H. and Yao, X. D. (2005) Fabrication of bulk amorphous Mg65Cu25Gd10 alloy of 12mm rod by water quenching. In: Magnesium – Science, Technology and Applications. Trans Tech Publications Inc., Zurich, Switzerland, pp. 211-214. ISBN 978-087849968-7

bulk amorphous alloys

Liu, Weili and Zhang, H. F. and Hu, Z. Q. and Wang, Hao (2005) Formation and mechanical properties of Mg65Cu25Er10 and Mg65Cu15Ag10Er10 bulk amorphous alloys. Journal of Alloys and Compounds, 397 (1-2). pp. 202-206. ISSN 0925-8388

bulk metallic glass

Wang, Hao (2010) The role of casting temperature in preparation of bulk metallic glasses. In: THERMEC 2009: 6th International Conference on Processing and Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications, 25-29 Aug 2009, Berlin, Germany.

Fu, H. M. and Zhang, H. F. and Wang, Hao and Hu, Z. Q. (2007) Multifarious fracture features of CuZrAlGd(Ag) bulk metallic glasses. Advanced Materials Research, 29-30. pp. 47-50. ISSN 1022-6680

bulk metallic glass matrix composite

Zhu, Z. W. and Zhang, H. F. and Wang, Hao and Ding, B. Z. and Hu, Z. Q. and Huang, Han (2009) Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting. Journal of Materials Research, 24 (10). pp. 3108-3115. ISSN 0884-2914

bulk metallic glasses

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2007) A practical thermodynamic method to calculate the best glass-forming composition for bulk metallic glasses. International Journal of Nonlinear Sciences and Numerical Simulation, 8 (2). pp. 171-178. ISSN 1565-1339

Wang, Hao and Fu, Huameng (2007) Development of bulk metallic glass composites. In: The world of bulk metallic glasses and their composites. Research Signpost, Kerala, India, pp. 73-92. ISBN 978-81-308-0196-4

Fu, H. M. and Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2006) In situ TiB-reinforced cu-based bulk metallic glass composites. Scripta Materialia, 54 (11). pp. 1961-1966. ISSN 1359-6462

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2006) In-situ Cu-based bulk metallic glass composite. International Journal of Modern Physics B, 20 (25-27). pp. 3963-3968. ISSN 0217-9792

Wang, Hao (2005) Bulk metallic glass composites. Journal of Materials Science and Technology, 21 (s1). pp. 86-90. ISSN 1005-0302

Wang, Hao and Song, Xiaoping and Yao, Xiangdong and Zhang, Haifeng and Hu, Zhuangqui (2005) Crystallization behavior of (Cu60Zr30Ti10)99Sn1 bulk metallic glass. Journal of Materials Science & Technology, 21 (s 1). pp. 51-53. ISSN 1005-0302

Fu, H. M. and Zhang, H. F. and Wang, Hao and Zhang, Qingsheng and Hu, Z. Q. (2005) Synthesis and mechanical properties of Cu-based bulk metallic glass composites containing in-situ TiC particles. Scripta Materialia, 52 (7). pp. 669-673. ISSN 1359-6462

bulk volume

Islam, M. M. and Kim, H. S. (2009) An overview on manufacturing and properties of syntactic foams made of ceramic hollow microspheres and starch. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Islam, Md Mainul and Kim, Ho Sung (2008) Manufacture of syntactic foams using starch as binder: post-mold processing. Materials and Manufacturing Processes, 23 (8). pp. 884-892. ISSN 1042-6914

bulk volume expansion

Islam, Md Mainul and Kim, Ho Sung (2008) Manufacture of syntactic foams using starch as binder: post-mold processing. Materials and Manufacturing Processes, 23 (8). pp. 884-892. ISSN 1042-6914

bullbar

Thota, N. M. and Epaarachchi, J. A. and Lau, K. T. (2013) Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

buoyancy

Islam, Md Mainul and Kim, Ho Sung (2011) Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment. Journal of Materials Processing Technology, 211 (4). pp. 708-716. ISSN 0924-0136

Islam, Md Mainul and Kim, Ho Sung (2008) Manufacture of syntactic foams using starch as binder: post-mold processing. Materials and Manufacturing Processes, 23 (8). pp. 884-892. ISSN 1042-6914

Islam, Md Mainul and Kim, Ho Sung (2007) Manufacture of syntactic foams: pre-mold processing. Materials and Manufacturing Processes, 22 (1). pp. 28-36. ISSN 1042-6914

CAFVM

Yao, Xiangdong and Wang, Hao and He, B. and Zhou, X. (2005) Modeling of columnar-to-equiaxed transition in solidified Al-Si alloys. In: 5th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 5), 2-5 Nov 2004, Beijing, China.

calcium

Yang, T. and Yao, X. and Zhang, Z. and Wang, H. (2012) Effects of ground granulated blast furnace slag on the mechanical and microstructure of fly ash-based geopolymer binders. In: 8th Asian-Australasian Conference on Composite Materials, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

calibration

Dohnal, Ludek and Faigl, Paul (2007) Evaluation of the linearity of calibration dependence. In: Quality assurance of analytical results, 26-28 Mar 2007, (Beskydy), Czech Republic. (Unpublished)

capacity

Xiang, Wei and Pietrobon, Steven S. (2003) On the capacity and normalisation of ISI channels. IEEE Transactions on Information Theory, 49 (9). pp. 2263-2268. ISSN 0018-9448

carbide tools

Ku, Harry S. and Chia, Wee Chong (2006) Design of multi-purpose carbide end mill. Institution of Engineers, Malaysia. Journal, 67 (2). pp. 34-40. ISSN 0126-513X

carbon

Lau, Alan kin-tak (2011) Carbon nanotube-reinforced nanocomposites. In: Multifunctional polymer nanocomposites. Taylor & Francis (CRC Press), Boca Raton, FL. United States, pp. 19-45. ISBN 978-1-4398-1682-0

carbon fiber reinforced platics

Asamoto, S. and Mutsuyoshi, H. and Aravinthan, T. and Suzukawa, K. (2008) Experimental investigation of innovative hybrid composite girders with GFRP and CFRP. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

carbon fibre

Falzon, P. and Leong, K. H. and McGarva, L. and Leong, Y. L. and Manalo, A. and Virk, A. and Leipnik, D. and Djukic, L. (2012) Development and assessment of a carbon fibre reinforced composite repair system. In: 8th Asian-Australasian Conference on Composite Materials, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Kim, M. T. and Rhee, K. Y. and Lee, J. H. and Hui, D. and Lau, Alan K. T. (2011) Property enhancement of a carbon fiber/epoxy composite by using carbon nanotubes. Composites Part B: Engineering , 42 (5). pp. 1257-1261. ISSN 1359-8368

Manalo, Allan and Mutsuyoshi, Hiroshi and Aravinthan, Thiru and Matsui, Takahiro (2009) Behaviour of hybrid FRP composite I-girder with concrete deck. In: FRPRCS-9: Current Challenges and Future Trends, 13-15 July 2009, Sydney, Australia.

carbon fibre and Araldite

Ku, Harry S. (2006) Productivity improvement of composites processing through the use of industrial microwave technologies. Progress in Electromagnetics Research (PIER), PIER 6. pp. 267-285. ISSN 1559-8985

carbon fibre and glass fibre

Ku, Harry S. and MacRobert, Martin and Siores, Elias and Ball, James A. R. (2000) Characterisation of thermoplastic matrix composites (TPC) using variable frequency micorwave (VFM). Plastics, Rubber and Composites, 29 (6). pp. 285-287. ISSN 1465-8011

Ku, Harry S. and MacRobert, Martin and Siores, Elias and Ball, James A. R. (2000) Variable frequency microwave processing of thermoplastic composites. Plastics, Rubber and Composites, 29 (6). pp. 278-284. ISSN 1465-8011

carbon fibre reinforced polymer

Tawfik, Qaidar H. and Karunasena, Warna (Karu) and Cardona, Francisco (2012) Strengthening of corroded steel angles using CFRP. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

Tawfik, Qaidar H. (2012) Rehabilitation of deteriorated steel truss members using CFRP. [Thesis (PhD/Research)] (Unpublished)

carbon fibre reinforced polymer (CFRP)

Tawfik, Qaidar and Karunasena, Warna (Karu) (2010) Use of CFRP for rehabilitation of steel structures: a review. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

carbon nanotube

Zhu, Yue-Feng and Shi, Lei and Liang, Ji and Hui, David and Lau, Kin-Tak (2008) Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics. Composites Part B: Engineering, 39 (7-8). pp. 1136-1141. ISSN 1359-8368

carbon nanotubes

Tarawneh, Mou’ad A. and Ahmad, Sahrim Hj. and EhNoum, SeYong and Lau, Kin-tak (2012) Sonication effect on the mechanical properties of MWCNTs reinforced natural rubber. Journal of Composite Materials. ISSN 0021-9983 (In Press)

Lau, Kin-Tak and Cheung, Hoi-Yan and Lu, Jian Ping and Yin, Yan-Sheng and Hui, David and Li, Hu-Lin (2008) Carbon nanotubes for space and bio-engineering applications. Journal of Computational and Theoretical Nanoscience, 5 (1). pp. 23-35. ISSN 1546-1955

carbon nanotubes (CNT)

Yao, X. D. and Wu, C. Z. and Wang, Hao and Cheng, H. M. and Lu, G. Q. (2006) Effects of carbon nanotubes and metal catalysts on hydrogen storage in magnesium nanocomposite. Journal of Nanoscience and Nanotechnology, 6 (2). pp. 494-498. ISSN 1533-4880

carbon-fibre

Choy, Yat-Sze and Lau, Kin-Tak and Wang, C. and Chau, C. W. and Liu, Yang and Hui, David (2009) Composite panels for reducing noise in air conditioning and ventilation systems. Composites Part B: Engineering, 40 (4). pp. 259-266. ISSN 1359-8368

carbonation

Zhang, Zuhua and Wang, Hao and Provis, John L. and Reid, Andrew (2013) Efflorescence: A critical challenge for geopolymer applications? In: Concrete 2013: Understanding Concrete, 16-18 Oct 2013, Gold Coast, Australia.

cardanol

Cardona, F. and Fedrigo, J. (2011) Synthesis of elastomeric phenolic resins with improved toughness and flexibility. In: EUROTEC 2011: Inaugural European Technical Conference on Plastics, 14-15 Nov 2011, Barcelona, Spain.

Cardona, Francisco and Aravinthan, Thiru and Fedrigo, Jessica and Moscou, Clarisse (2010) Synthesis of phenolic bio-resins for advanced composites in civil engineering structures. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Cardona, F. and Aravinthan, T. and Moscou, C. (2010) Modified PF resins for composite structures with improved mechanical properties. Polymers and Polymer Composites, 18 (6). pp. 297-306. ISSN 0967-3911

Cardona, F. and Moscou, C. (2009) Synthesis and characterization of modified phenolic resins for composites with enhanced mechanical properties. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

cartesian grids

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2012) Local moving least square-one-dimensional integrated radial basis function networks technique for incompressible viscous flows. International Journal for Numerical Methods in Fluids, 70. pp. 1443-1474. ISSN 0271-2091

cashew nut shell liquid

Cardona, F. and Moscou, C. (2009) Synthesis and characterization of modified phenolic resins for composites with enhanced mechanical properties. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

cast composites

Ku, H. and Prajapati, M. and Trada, M. (2012) Fracture toughness of vinyl ester composites reinforced with sawdust and postcured in microwaves. International Journal of Microwave Science and Technology, 2012 (Articl). ISSN 1687-5826

casting

Ku, H. and Maxwell, A. and Wong, P. and Huang, J. and Fung, H. (2011) Relationship between electrical and mechanical loss tangents of hollow glass powder reinforced epoxy composites: a pilot study. Journal of Applied Polymer Science , 119 (5). pp. 2945-2952. ISSN 0021-8995

Wang, Hao (2010) The role of casting temperature in preparation of bulk metallic glasses. In: THERMEC 2009: 6th International Conference on Processing and Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications, 25-29 Aug 2009, Berlin, Germany.

casting temperature

Wang, Hao (2010) The role of casting temperature in preparation of bulk metallic glasses. In: THERMEC 2009: 6th International Conference on Processing and Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications, 25-29 Aug 2009, Berlin, Germany.

casting temperatures

Zhu, Z. W. and Zhang, H. F. and Wang, Hao and Ding, B. Z. and Hu, Z. Q. and Huang, Han (2009) Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting. Journal of Materials Research, 24 (10). pp. 3108-3115. ISSN 0884-2914

catalysts

Munoz, J.-C. and Ku, H. and Cardona, F. and Rogers, D. (2008) Effects of catalysts and post-curing conditions in the polymer network of epoxy and phenolic resins: preliminary results. Journal of Materials Processing Technology, 202 (1-3). pp. 486-492. ISSN 0924-0136

catalytic effects

Yao, X. and Wu, C. Z. and Wang, H. and Cheng, H. M. and Lu, G. Q. Max (2005) Hydrogen storage of magnesium-based nanocomposites system. Journal of Materials Science & Technology, 21 (s 1). pp. 57-60. ISSN 1005-0302

cell performance

Bose, Saswata and Kuila, Tapas and Nguyen, Thi Xuan Hien and Kim, Nam Hoon and Lau, Kin-tak and Lee, Joong Hee (2011) Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenge. Progress in Polymer Science, 36 (6). pp. 813-843. ISSN 0079-6700

cell structure

Lau, Kin-tak and Ho, Mei-po and Au-Yeung, Chi-ting and Cheung, Hoi-yan (2010) Biocomposites: their multifunctionality. International Journal of Smart and Nano Materials, 1 (1). pp. 13-27. ISSN 1947-5411

cellular automaton (CA)

Yao, X. and Wang, H. and He, B. and Zhou, X. (2006) Numerical simulation of dendrite growth during solidification. International Journal of Nonlinear Sciences and Numerical Simulation, 7 (2). pp. 171-176. ISSN 1565-1339

cemented carbides

Albdiry, Mushtaq and Alethari, Haydar (2012) Effect of alumina inclusions on microstructure and mechanical properties of 62 WC, 32 (Ti-W) C and 6 Co compacts. International Journal of Microstructure and Materials Properties, 7 (4). pp. 329-340. ISSN 1741-8410

ceramic microspheres

Ku, H. and Cardona, F. and Ball, J. and Jacobson, W. and Trada, M. (2008) Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study. Journal of Composite Materials, 42 (19). pp. 2083-2095. ISSN 0021-9983

CFRP

Sirimanna, C. S. and Karunasena, W. and Manalo, A. C. and Banerjee, S. and McGarva, L. (2013) Analysis of internal bonded fibre reinforced composite repair systems for corroded steel pipelines. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 Dec 2013, Melbourne, Australia .

Tawfik, Qaidar H. (2012) Rehabilitation of deteriorated steel truss members using CFRP. [Thesis (PhD/Research)] (Unpublished)

CFRP composites

Cardona, Francisco and Tawfik, Qaidar H. and Karunasena, Karu (2012) Reinforcement of corroded steel structures with CFRP panels. In: ICACE 2012: International Conference on Architectural and Civil Engineering, 24-25 Oct 2012, Bali, Indonesia.

chain dynamics

Fang, Zhengping and Shang, Shuying and Wang, Hao (2013) Confinement of C60 nanoparticles on the dynamics of polystyrene studied by anelastic spectroscopy and rheometrics. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

characteristics degradation

Azwa, Z. N. and Yousif, B. F. and Manalo, A. C. and Karunasena, W. (2013) A review on the degradability of polymeric composites based on natural fibres. Materials and Design, 47. pp. 424-442. ISSN 0264-1275

chemical treatment

Kabir, Mohammad Mazedul and Wang, Hao and Lau, Alan and Cardona, Francisco and Aravinthan, Thiru (2012) Compressive properties of chemically-treated hemp fibre reinforced composites. In: Composites Australia and CRC-ACS, 2012 Conference: Diversity in Composite, 15-16 Mar 2012, Leura, Australia.

chemical treatments

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. (2013) Tensile properties of chemically treated hemp fibres as reinforcement for composites. Composites Part B: Engineering , 53. pp. 362-368. ISSN 1359-8368

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. (2013) Effects of chemical treatments on hemp fibre structure. Applied Surface Science , 276. pp. 13-23. ISSN 0169-4332

Wang, H. and Kabir, M. M. and Lau, K. T. (2011) The effect of fibre chemical treatments on hemp reinforced composites. In: 18th International Conference on Composite Materials (ICCM-18), 21-26 Aug 2011, Jeju Island, Korea.

chicken feathers

Cheng, Sha and Lau, Kin-Tak and Liu, Tao and Zhao, Yong-Qing and Lam, Pou-Man and Yin, Yansheng (2009) Mechanical and thermal properties of chicken feather fiber/PLA green composites. Composites Part B: Engineering, 40 (7). pp. 650-654. ISSN 1359-8368

chloride penetration

Zhu, Huajun and Zhang, Zuhua and Zhu, Yingcan and Tian, Liang (2014) Durability of alkali-activated fly ash concrete: chloride penetration in pastes and mortars. Construction and Building Materials , 65. pp. 51-59. ISSN 0950-0618

chopped bagasse fibers

Trada, M. and Mandava, J. and Ku, H. and Yousif, B. (2012) Tensile properties of bagasse reinforced epoxy composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today , 6-8 Nov 2012 , Kuala Lumpur, Malaysia .

civil applications

Azwa, Z. N. and Yousif, B. F. and Manalo, A. C. and Karunasena, W. (2013) A review on the degradability of polymeric composites based on natural fibres. Materials and Design, 47. pp. 424-442. ISSN 0264-1275

civil construction

Manalo, A. C. (2012) Recent developments on fibre composite sandwich structures in civil infrastructure. In: 6th International Composites Conference (ACUN 6): Composite and Nanocomposites in Civil, Offshore and Mining Infrastructure, 14-16 Nov 2012, Melbourne, Australia.

civil engineering

Manalo, Allan (2013) Fibre reinforced polymer composites sandwich structure: Recent developments and applications in civil infrastructure. In: 2013 International Research Conference on Innovations in Engineering, Science and Technology (IRCIEST 2013), 27-29 Nov 2013, Batangas State University, Batangas, Philippines.

Aravinthan, Thiru and Manalo, Allan (2011) Student performance in an online postgraduate course on fibre composites for civil engineers. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

civil engineering applications

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2014) An overview of mechanical properties and durability of glass-fibre reinforced recycled mixed plastic waste composites. Materials and Design, 62. pp. 98-112. ISSN 0264-1275

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2012) A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials and Design, 33 (1). pp. 534-544. ISSN 0264-1275

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2011) Multi-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applications. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Davey, Scott W. and Heldt, Tim and Van Erp, Gerard and Ayers, Stephen R. (2005) Vinylester/cenosphere composite materials for civil and structural engineering. FRP International : The Official Newsletter of the International Institute for FRP in Construction, 2 (3). pp. 2-5.

civil engineers

Aravinthan, Thiru and Manalo, Allan (2011) Student performance in an online postgraduate course on fibre composites for civil engineers. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

civil infrastructure

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2013) A review of FRP composite truss systems and its connection. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22): Materials to Structures: Advancement through Innovation , 11-14 Dec 2012, Sydney, Australia.

Aravinthan, T. (2012) Composites in civil infrastructure – R&D to applications. In: 6th International Composites Conference (ACUN 6): Composites and Nanocomposites in Civil, Offshore and Mining Infrastructure , 14-16 Nov 2012, Melbourne, Australia.

Aravinthan, Thiru, ed. (2008) Fibre composites in civil infrastructure - past, present and future. University of Southern Queensland, Toowoomba, Australia.

civil infrastructures

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2012) A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials and Design, 33 (1). pp. 534-544. ISSN 0264-1275

clamped plates

Choy, Y. S. and Liu, Y. and Cheung, H. Y. and Xi, Q. and Lau, K. T. (2012) Development of composite plate for compact silencer design. Journal of Sound and Vibration, 331 (10). pp. 2348-2364. ISSN 0022-460X

clay

Mishra, Ananta Kumar and Bae, Seon-Hyeong and Kim, Nam Hoon and Lau, Kin-tak and Lee, Joong Hee (2012) Nafion-peptized laponite clay nanocomposite membrane for PEMFC. In: 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM 20), 15-18 Dec 2011, Hong Kong.

Wang, Zhicai and Xu, Cailing and Zhao, Yongqing and Zhao, Dandan and Wang, Zhe and Li, Hulin and Lau, Kin-Tak (2008) Fabrication and mechanical properties of exfoliated clay-CNTs/epoxy nanocomposites. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 490 (1-2). pp. 481-487. ISSN 0921-5093

clay nanocomposites

Albdiry, Mushtaq and Yousif, Belal and Ku, Harry (2013) Fracture toughness and toughening mechanisms of unsaturated polyester-based clay nanocomposites. In: 13th International Conference on Fracture , 16-21 Jun 2013, Beijing, China.

clogging

Mishra, Krishna and Zhuge, Yan and Karunasena, Karu (2013) Clogging mechanism of permeable concrete: A review. In: Concrete 2013: Understanding Concrete, 16-18 Oct 2013, Gold Coast, Australia.

CNTs

Yao, X. and Wu, C. Z. and Wang, H. and Cheng, H. M. and Lu, G. Q. Max (2005) Hydrogen storage of magnesium-based nanocomposites system. Journal of Materials Science & Technology, 21 (s 1). pp. 57-60. ISSN 1005-0302

coating

Zhang, Zuhua and Yao, Xiao and Wang, Hao (2012) Potential application of geopolymers as protection coatings for marine concrete III. Field experiment. Applied Clay Science, 67-68. pp. 57-60. ISSN 0169-1317

coating methods

Chen, Ling and Tang, Chak Yin and Ku, Harry Siu Lung and Chen, Da Zhu and Tsui, Chi Pong (2013) Surface coating of poly-D-L-lactide/nano-hydroxyapatite composite scaffolds for dexamethasone-releasing function and wettability enhancement. In: Materials Science and Technology Conference (MS&T 2012): Next Generation Biomaterials and Surface Properties of Biomaterials , 27-31 Oct 2012, Pittsburgh, PA. United States.

coatings

Doherty, William and Halley, Peter J. and Edye, Les and Rogers, David and Cardona, Francisco and Park, Yosup and Woo, Tim (2007) Studies on polymers and composites from lignin and fiber derived from sugar cane. Polymers for Advanced Technologies, 18 (8). pp. 673-678. ISSN 1042-7147

coconut

Salleh, Z. and Islam, M. M. and Yusop, M. Y. M. and Idrus, M. A. Munaim M. (2014) Mechanical properties of activated carbon (AC) coconut shell reinforced polypropylene composites encapsulated with epoxy resin [NYP 4/6/14]. In: 5th International Conference on Chemical, Biological and Environmental Engineering (ICBEE 2013), 14-15 Sep 2013, New Delhi, India. (In Press)

coconut shell

Misnon, M. I. and Bahari, S. A. and Islam, M. M. and Epaarachchi, J. A. (2013) Integration of textile fabric and coconut shell in particleboard. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

codes of practice

Charles, Michael and Furneaux, Craig and Pillay, Janet and Thorpe, David and Parades Castello, Cynthya and Brown, Kerry (2007) Uptake of an OHS Code of Practice by Australian construction firms. In: CIB World Building Congress 2007: Construction for Development, 14-17 May 2007, Cape Town, South Africa.

codes of practice and standards

Ayers, Stephen R. and van Erp, Gerard (2004) A Code of Practice for the structural design of fibre composites. Proceedings of the Institution of Civil Engineers, Structures & Buildings, 157 (1). pp. 3-8. ISSN 1751-7702

coiled carbon nanotube

Li, Xiao-Feng and Lau, Kin-Tak and Yin, Yan-Sheng (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology, 68 (14). pp. 2876-2881. ISSN 0266-3538

coiled carbon nanotubes

Li, Xiao-Feng and Lau, Kin-Tak and Yin, Yan-Sheng (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology, 68 (14). pp. 2876-2881. ISSN 0266-3538

coiled nanotubes

Li, Xiao-Feng and Lau, Kin-Tak and Yin, Yan-Sheng (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology, 68 (14). pp. 2876-2881. ISSN 0266-3538

coir fiber

Yousif, B. F. and Ku, H. (2012) Suitability of using coir fiber/polymeric composite for the design of liquid storage tanks. Materials and Design, 36. pp. 847-853. ISSN 0264-1275

collapsed tubes

Guades, Ernesto J. and Aravinthan, Thiru and Islam, Md. Mainul and Manalo, Allan C. (2012) Stiffness of FRP pultruded tubes under repeated axial impacts. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

column

Omar, T. and Aravinthan, T. and Van Erp, G. (2007) The effect of core architecture on the behaviour of sandwich columns under edgewise compression loading. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

columnar equiaxed transition (CET)

Yao, Xiangdong and Wang, Hao and He, B. and Zhou, X. (2005) Modeling of columnar-to-equiaxed transition in solidified Al-Si alloys. In: 5th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 5), 2-5 Nov 2004, Beijing, China.

combustion

Liu, Shan and Yan, Hongqiang and Fang, Zhengping and Guo, Zhenghong and Wang, Hao (2014) Effect of graphene nanosheets and layered double hydroxides on the flame retardancy and thermal degradation of epoxy resin. RSC Advances: an international journal to further the chemical sciences, 4 (36). pp. 18652-18659.

comparison

Salleh, Z. and Islam, M. M. and Ku, H. (2014) Study on compressive properties of syntactic foams for marine applications. Journal of Multifunctional Composites, 2 (1). pp. 21-27.

Salleh, Z. and Islam, M. M. and Ku, H. (2013) Preliminary study on the development of syntactic foams for marine applications. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

compatibilization

Si, Xiaojuan and Guo, Linfeng and Wang, Yimin and Lau, Kin-Tak (2008) Preparation and study of polypropylene/polyethylene terephthalate composite fibres. Composites Science and Technology, 68 (14). pp. 2943-2947. ISSN 0266-3538

compatibilized blends

Si, Xiaojuan and Guo, Linfeng and Wang, Yimin and Lau, Kin-Tak (2008) Preparation and study of polypropylene/polyethylene terephthalate composite fibres. Composites Science and Technology, 68 (14). pp. 2943-2947. ISSN 0266-3538

complex structures

Aravinthan, Thiru and Omar, Tarek (2008) Fibre composite windmill structure - challenges in the design and development. In: CICE 2008: 4th International Conference on FRP Composites in Civil Engineering, 22-24 Jul 2008, Zurich, Switzerland.

composite

Misnon, M. I. and Islam, M. M. and Epaarachchi, J. and Lau, K. T. (2013) Textile material forms for reinforcement materials: a review. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak (2013) Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs. Composite Structures, 100. pp. 40-54. ISSN 0263-8223

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2012) Investigation of the free vibration behaviour of an innovative GFRP sandwich floor panel. Construction and Building Materials, 37. pp. 209-219. ISSN 0950-0618

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak and Elder, David (2012) Fibre composites for high pressure pipeline repairs, in-air and subsea: an overview. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012) , 2-4 Feb 2012, Sapporo, Japan.

Awad, Ziad K. and Yusaf, Talal (2012) Fibre composite railway sleeper design by using FE approach and optimization techniques. Structural Engineering and Mechanics, 41 (2). pp. 231-242. ISSN 1225-4568

Yousif, B. F. (2012) Design of newly fabricated tribological machine for wear and frictional experiments under dry/wet condition. Materials and Design. ISSN 0261-3069 (In Press)

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2011) Natural fibre composites with QLD based fibres and vegetable oils. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Sirimanna, Chamila S. and Islam, Md Mainul and Aravinthan, Thiru (2010) Effects of temperature on a pultruded FRP composite. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Western Australia.

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2010) Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Ku, H. and Kota, V. and Trada, M. (2010) Optimum percentage of fly ash reinforcement in vinyl ester composites. Journal of Materials in Civil Engineering, 22 (1). pp. 104-107. ISSN 0899-1561

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2009) Finite element analysis of fibre composite sandwich panel. In: Southern Engineering Conference, 17-18 Oct 2009, Springfield, Queensland, Australia.

Manalo, Allan and Mutsuyoshi, Hiroshi and Aravinthan, Thiru and Matsui, Takahiro (2009) Behaviour of hybrid FRP composite I-girder with concrete deck. In: FRPRCS-9: Current Challenges and Future Trends, 13-15 July 2009, Sydney, Australia.

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Islam, Mainul (2009) Flexural behaviour of composite sandwiches for structural applications. In: FRPRCS-9: Current Challenges and Future Trends, 13-15 Jul 2009, Sydney, Australia.

Li, Xiao-Feng and Lau, Kin-Tak and Yin, Yan-Sheng (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology, 68 (14). pp. 2876-2881. ISSN 0266-3538

Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2007) Tungsten fibre reinforced Zr-based bulk metallic glass composites. Materials and Manufacturing Processes, 22 (5-6). pp. 687-691. ISSN 1042-6914

composite action

Manalo, A. C. and Aravinthan, T. and Mutsuyoshi, H. and Matsui, T. (2012) Composite behaviour of a hybrid FRP bridge girder and concrete deck. Advances in Structural Engineering, 15 (4). pp. 589-600. ISSN 1369-4332

composite beam

Mutsuyoshi, Hiroshi and Hai, Nguyen Duc and Shiroki, Kensuke and Aravinthan, Thiru and Manalo, Allan (2011) Experimental investigation of HFRP composite beams. In: FRPRCS-10: 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures , 2-4 Apr 2011, Tampa, FL. United States.

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

composite beams

Manalo, Allan and Mutsuyoshi, Hiroshi (2012) Behavior of fiber-reinforced composite beams with mechanical joints. Journal of Composite Materials, 46 (4). pp. 483-496. ISSN 0021-9983

composite fibres

Si, Xiaojuan and Guo, Linfeng and Wang, Yimin and Lau, Kin-Tak (2008) Preparation and study of polypropylene/polyethylene terephthalate composite fibres. Composites Science and Technology, 68 (14). pp. 2943-2947. ISSN 0266-3538

composite laminate

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

composite materials

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. and Followell, D. and Birt, P. (2013) Use of fixed wavelength Fibre-Bragg Grating (FBG) filters to capture time domain data from the distorted spectrum of an embedded FBG sensor to estimate strain with an artificial neural network. Sensors and Actuators A: Physical, 194. pp. 1-7. ISSN 0924-4247

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Lau, K.T. (2013) Prediction of obsolete FBG sensor using ANN for efficient and robust operation of SHM systems. Key Engineering Materials, 558. pp. 546-553. ISSN 1013-9826

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. and Lau, K. T. (2012) Optimized FBG sensor network for efficient detection of a delamination in FRP structures. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Yousif, B. F. and Chin, C. W. (2012) Epoxy composite based on kenaf fibers for tribological applications under wet contact conditions. Surface Review and Letters, 19 (5). pp. 1250050-1. ISSN 0218-625X

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. (2011) Identification of distortions to FBG spectrum using FBG fixed filters. In: ICCM18: Composite Materials: Key to the Future, 21-26 Aug 2011, Jeju, Korea.

Epaarachchi, J. A. (2011) The effect of viscoelasticity on fatigue behaviour of polymer matrix composites. In: Creep and fatigue in polymer matrix composites. Woodhead Publishing Ltd, Cambridge, United Kingdom, pp. 492-513. ISBN 978 1 84569 656 6; eISBN 978-0-85709-043-0

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Followell, David and Birt, Peter and Canning, John and Stevenson, Michael (2010) An investigation of spectral response of embedded Fibre Bragg Grating (FBG) sensors in a hollow composite cylindrical beam under pure torsion and combined loading. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Australia.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Canning, John (2010) Effects of the self distortions of embedded FBG sensors on spectral response due to torsional and combined loads. In: 3rd Asia-Pacific Workshop on Structural Health Monitoring, 30 Nov-2 Dec 2010, Tokyo, Japan.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Aravinthan, Thiru (2010) The developments of structural health/integrity monitoring systems using FBG sensors at CEEFC of USQ. In: 2010 Southern Region Engineering Conference (SREC 2010) , 11-12 Nov 2010, Toowoomba, Australia.

Vandenbroucke, A. and Cardona, F. and Ku, H. and Rogers, D. (2009) Effects of chopped hemp on mechanical and thermal properties of epoxy resins. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Cardona, F. and Moscou, C. (2009) Synthesis and characterization of modified phenolic resins for composites with enhanced mechanical properties. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Goh, S. and Ku, H. and Ang, S. L. (2008) Prediction of crushing stress in composite materials. Journal of Composite Materials, 42 (5). pp. 467-484. ISSN 0021-9983

composite panels

Choy, Yat-Sze and Lau, Kin-Tak and Wang, C. and Chau, C. W. and Liu, Yang and Hui, David (2009) Composite panels for reducing noise in air conditioning and ventilation systems. Composites Part B: Engineering, 40 (4). pp. 259-266. ISSN 1359-8368

composite piles

Guades, Ernesto and Aravinthan, Thiru and Islam, Mainul and Manalo, Allan (2012) A review on the driving performance of FRP composite piles. Composite Structures, 94 (6). pp. 1932-1942. ISSN 0263-8223

Guades, Ernesto J. and Aravinthan, Thiru and Islam, Md. Mainul and Manalo, Allan C. (2012) Stiffness of FRP pultruded tubes under repeated axial impacts. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Guades, E. J. and Aravinthan, T. and Islam, M. M. (2011) Driveability of composite piles. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011) , 27-29 Apr 2011, Brisbane, Australia.

Guades, Ernesto Jusayan and Aravinthan, Thiru and Islam, Md Mainul (2010) An overview on the application of FRP composites in piling system. In: 2010 Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Queensland, Australia.

composite plates

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) Modal analysis of high frequency acoustic signal approach for progressive failure monitoring in thin composite plates. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Choy, Y. S. and Liu, Y. and Cheung, H. Y. and Xi, Q. and Lau, K. T. (2012) Development of composite plate for compact silencer design. Journal of Sound and Vibration, 331 (10). pp. 2348-2364. ISSN 0022-460X

Karunasena, W. (2008) Elastodynamic reciprocity relations for wave scattering by flaws in fiber-reinforced composite plates. Journal of Mechanics of Materials and Structures, 3 (10). pp. 1831-1846. ISSN 1559-3959

composite polymer matrix

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2012) A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials and Design, 33 (1). pp. 534-544. ISSN 0264-1275

composite properties

Kabir, M. M. and Wang, H. and Aravinthan, T. and Cardona, F. and Lau, K.-T. (2011) Effects of natural fibre surface on composite properties: a review. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing , 27-29 Apr 2011, Brisbane, Australia.

composite repair

Sirimanna, C. S. and Karunasena, W. and Manalo, A. C. and Banerjee, S. and McGarva, L. (2013) Analysis of internal bonded fibre reinforced composite repair systems for corroded steel pipelines. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 Dec 2013, Melbourne, Australia .

composite sandwich beam

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

composite sandwich beams

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) Flexural behaviour of glue-laminated fibre composite sandwich beams. Composite Structures, 92 (11). pp. 2703-2711. ISSN 0263-8223

Manalo, A. C. and Aravinthan, T. and Karunasena, W. and Islam, M. M. (2010) Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions. Composite Structures, 92 (4). 984-995 . ISSN 0263-8223

composite sandwich structure

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of glued fibre composite sandwich structure in flexure: experiment and fibre model analysis. Materials and Design, 39. pp. 458-468. ISSN 0264-1275

composite sandwiches

Karunasena, Warna (2010) The effect of debonding on the natural frequencies of laminated fibre composite sandwich plates. In: 6th Australasian Congress on Applied Mechanics (ACAM 6) , 12-15 Dec 2010, Perth, Western Australia.

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2009) Flexural behaviour of laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

Karunasena, W. and Aravinthan, T. and Manalo, A. C. (2009) Vibration of debonded laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

composite scaffolds

Chen, Ling and Tang, Chak Yin and Ku, Harry Siu Lung and Chen, Da Zhu and Tsui, Chi Pong (2013) Surface coating of poly-D-L-lactide/nano-hydroxyapatite composite scaffolds for dexamethasone-releasing function and wettability enhancement. In: Materials Science and Technology Conference (MS&T 2012): Next Generation Biomaterials and Surface Properties of Biomaterials , 27-31 Oct 2012, Pittsburgh, PA. United States.

composite structures

Kahandawa, Gayan C. and Epaarachchi, Jayantha and Wang, Hao and Canning, John and Lau, K. T. (2013) Extraction and processing of real time strain of embedded FBG sensors using a fixed filter FBG circuit and an artificial neural network. Measurement: Journal of the International Measurement Confederation , 46 (10). pp. 4045-4051. ISSN 0263-2241

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Lau, K. T. (2013) Indexing damage using distortion of embedded FBG sensor response spectra. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Manalo, Allan C. and Aravinthan, Thiru (2011) Flexural behaviour of glulam beams from novel sandwich panels. In: 16th International Conference on Composite Structures (ICCS 16), 28-30 July 2011, Porto, Portugal.

Epaarachchi, Jayantha A. and Rathnaweera, Gayan and Canning, John and Stevenson, Michael (2010) Response Fibre Bragg Grating (FBG) strain sensors embedded at different locations through the thickness around a delamination in a composite lamina. In: 7th Asian-Australasian Conference on Composites (ACCM7), 15-18 Nov 2010, Taipei, Taiwan.

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

Van Erp, Gerard and Cattell, Craig and Heldt, Tim (2005) Fibre composite structures in Australia's civil engineering market: an anatomy of innovation. Structural Control and Health Monitoring, 7 (3). pp. 150-160. ISSN 1365-0556

Ayers, Stephen R. and van Erp, Gerard (2004) A Code of Practice for the structural design of fibre composites. Proceedings of the Institution of Civil Engineers, Structures & Buildings, 157 (1). pp. 3-8. ISSN 1751-7702

composite systems

Choy, Yat-Sze and Lau, Kin-Tak and Wang, C. and Chau, C. W. and Liu, Yang and Hui, David (2009) Composite panels for reducing noise in air conditioning and ventilation systems. Composites Part B: Engineering, 40 (4). pp. 259-266. ISSN 1359-8368

composite systems fly ash

Lokuge, Weena and Aravinthan, Thiru and Sirimanna, Chamila Sampath and Islam, Mainul (2011) Influence of fly ash proportions on properties of polymer cconcrete with polyester resin. In: Concrete 2011: Building a Sustainable Future, 12-14 Oct 2011, Perth, Western Australia.

composite tubes

Guades, Ernesto Jusayan (2013) Behaviour of glass FRP composite tubes under repeated impact for piling application. [Thesis (PhD/Research)] (Unpublished)

composite walls

Manalo, Allan (2013) Structural behaviour of a prefabricated composite wall system made from rigid polyurethane foam and magnesium oxide board. Construction and Building Materials, 41. pp. 642-653. ISSN 0950-0618

composites

Hafizi, Z. M. and Kahandawa, G. C. and Epaarachchi, J. and Lau, K. T. and Canning, J. and Cook, K. (2013) NIR fibre bragg grating as dynamic sensor: an application of 1D digital wavelet analysis for signal denoising. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2013) Effect of skin-core debonding on the dynamic behaviour of GFRP composite beams. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Ku, H. and Trada, M. and Tai, P. (2013) Dielectric properties of sawdust reinforced epoxy composites post-cured in microwaves. Journal of Reinforced Plastics and Composites, 32 (10). pp. 765-774. ISSN 0731-6844

Alsaeed, T. and Yousif, B. F. and Ku, H. (2013) The potential of using date palm fibres as reinforcement for polymeric composites. Materials and Design, 43. pp. 177-184. ISSN 0264-1275

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2013) A review of FRP composite truss systems and its connection. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22): Materials to Structures: Advancement through Innovation , 11-14 Dec 2012, Sydney, Australia.

Ho, Mei-Po and Wang, Hao and Lau, Kin-Tak and Leng, Jinsong (2013) Effect of silk fiber to the mechanical and thermal properties of its biodegradable composites. Journal of Applied Polymer Science , 127 (4). pp. 2389-2396. ISSN 0021-8995

Yousif, Belal F. and Islam, Md Mainul and Salit, Mohd Sapuan (2013) Sustainable composites [Editorial]. Advances in Materials Science and Engineering. ISSN 1687-8434

Ku, H. and Yap, Y. S. and Lee, T. S. and Trada, M. (2012) Tensile properties of phenol-formaldehyde nanoclay reinforced composites: a pilot study. Journal of Applied Polymer Science, 126 (s2). E142-E150. ISSN 0021-8995

Aravinthan, T. (2012) Composites in civil infrastructure – R&D to applications. In: 6th International Composites Conference (ACUN 6): Composites and Nanocomposites in Civil, Offshore and Mining Infrastructure , 14-16 Nov 2012, Melbourne, Australia.

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of glued fibre composite sandwich structure in flexure: experiment and fibre model analysis. Materials and Design, 39. pp. 458-468. ISSN 0264-1275

Ku, H. and Wong, P. and Huang, J. and Fung, H. and Trada, M. (2012) Flexural properties of epoxy composites filled with glass powder: preliminary results. Advanced Material Research, 410. pp. 309-312. ISSN 1022-6680

Ho, M. P. and Wang, H. and Lau, K. T. and Jayaraman, K. and Bhattacharyya, D. (2012) Mechanical properties of a bamboo charcoal reinforced polylactic acid composite. In: 8th Asian-Australasian Conference on Composite Materials: Enabling Tomorrow's Industry Toda (ACCM 8), 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Hafizi, Z. M. and Epaarachchi, J. and Nizwan, C. K. E. and Lau, K. T. (2012) Non-velocity based analysis of passive ultrasonic signal for source lLocation detection in composite plates: a pilot study. IOP Conference Series: Materials Science and Engineering, 36 (1). ISSN 1757-8981

Malvern, J. L. and Epaarachchi, J. A. and Lau, K. T. (2011) Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions. In: 18th International Conference on Composite Materials (ICCM-18), 21-26 Aug 2011, Jeju Island, South Korea.

Lau, Alan K. T. and Ho, Mabel M. P. (2011) Recent research trend in natural-fibre composites. JEC Composites (67). pp. 50-52. ISSN 1639-965X

Ho, Mei-Po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Mechanical properties of an injected silk fibre reinforced PLA composite. In: 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX), 14-17 Jan 2011, Auckland, New Zealand.

Islam, M. M. and Aravinthan, T. (2011) Behaviour of fibre composite sandwich panels under uniformly distributed loading. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Epaarachchi, J. A. (2011) The effect of viscoelasticity on fatigue behaviour of polymer matrix composites. In: Creep and fatigue in polymer matrix composites. Woodhead Publishing Ltd, Cambridge, United Kingdom, pp. 492-513. ISBN 978 1 84569 656 6; eISBN 978-0-85709-043-0

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

Ku, H. and Trada, M. and Cecil, T. and Wong, P. (2010) Tensile tests of phenol formaldehyde glass-powder-reinforced composites: pilot study. Journal of Applied Polymer Science, 116 (1). pp. 10-17. ISSN 0021-8995

Guo, Qing Bing and Lau, Kin-Tak and Zheng, Bing Fa and Rong, Min Zhi and Zhang, Ming Qiu (2009) Imparting ultra-low friction and wear rate to epoxy by the incorporation of microencapsulated lubricant? Macromolecular Materials and Engineering, 294 (1). pp. 20-24. ISSN 1438-7492

Epaarachchi, J. A. and Karunasena, W. and Aravinthan, T. (2009) Dynamic behavior of hybrid composite bridge girder. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao, eds. (2009) Futures in mechanics of structures and materials: proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), Toowoomba, Australia, 2-5 December 2008. Taylor & Francis (CRC Press), London, UK. ISBN 978-0-415-49196-9

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2008) Investigation of embedded near infrared fibre Bragg grating (FBG) sensors (830 nm) in structural health monitoring of glass fibre composite structures. In: OFS-19: 19th International Conference on Optical Fibre Sensors , 14-18 April 2008, Perth, Australia.

Ku, H. and Chan, W. L. and Trada, M. and Baddeley, D. (2007) An evaluation of fracture toughness of vinyl ester composites cured under microwave conditions. Journal of Materials Engineering and Performance, 16 (6). pp. 741-745. ISSN 1059-9495

Doherty, William and Halley, Peter J. and Edye, Les and Rogers, David and Cardona, Francisco and Park, Yosup and Woo, Tim (2007) Studies on polymers and composites from lignin and fiber derived from sugar cane. Polymers for Advanced Technologies, 18 (8). pp. 673-678. ISSN 1042-7147

Omar, T. and Van Erp, G. and Key, P. (2007) Modular deployable composite shelters - truss system. In: ACIC 2007: Advanced Composites in Construction Conference , 2-4 Apr 2007, Bath, UK.

Omar, T. and Van Erp, G. and Key, P. W. (2006) Stressed arch modular deployable composite shelters: concept and development. In: CICE 2006: 3rd International Conference on FRP Composites in Civil Engineering, 13-15 Dec 2006, Miami, Fl, USA.

Epaarachchi, Jayantha A. (2006) Assessment of damage accumulation in glass fibre reinforced plastic (GFRP) composites under spectrum fatigue loading. In: 2006 International Conference on Structural Integrity and Failure (SIF2006), 27-29 Sept 2006, Sydney, Australia.

Epaarachchi, Jayantha A. and Clegg, Richard (2006) An experimental investigation of the properties of cross-ply laminate used for manufacturing of small aircraft components. Composite Structures, 75 (1-4). pp. 93-99. ISSN 0263-8223

Wang, Hao (2005) Bulk metallic glass composites. Journal of Materials Science and Technology, 21 (s1). pp. 86-90. ISSN 1005-0302

Ku, Harry S. and Van Erp, Gerard and Ball, James A. R. and Ayers, Stephen R. and Siu, Fred (2002) Shrinkage reduction of thermoset fibre composites during hardening using microwaves irradiation for curing. In: 2nd World Engineering Congress, 22-25 Jul 2002, Kuching, Malaysia.

compression

Maranan, G. B. and Manalo, A. C. (2013) Investigation on the mechanical behavior of hybrid fibre reinforced polymer composite beam. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 December 2013, Melbourne, Australia.

Manalo, Allan and Mutsuyoshi, Hiroshi and Matsui, Takahiro (2012) Testing and characterization of thick hybrid fibre composites laminates. International Journal of Mechanical Sciences , 63 (1). pp. 99-109. ISSN 0020-7403

Guades, E. J. and Sirimanna, C. S. and Aravinthan, T. and Islam, M. M. (2011) Behaviour of fibre composite pile under axial compression load. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Rao, Sanjeev and Banerjee, Sourish and Jayaraman, Krishnan and Bhattacharyya, Debes (2010) Compressive behavior of fibre reinforced honeycomb cores. In: 2008 IUTAM Symposium on Multi-Functional Material Structures and Systems, 10-12 Dec 2008, Bangalore, India.

Wang, Hao and Ning, Zhiliang (2009) Deformation behaviour of aluminium alloy A356 in semisolid state. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

compression and shear

Etaati, Amir and Dehghani, Kamran (2013) A study on hot deformation behavior of Ni-42.5Ti-7.5Cu alloy. Materials Chemistry and Physics, 140 (1). pp. 208-215. ISSN 0254-0584

compression failure

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

compression moulding

Ku, H. and Wang, H. and Pattarachaiyakoop, N. and Trada, M. (2011) A review on the tensile properties of natural fiber reinforced polymer composites. Composites Part B: Engineering, 42 (4). pp. 856-873. ISSN 1359-8368

compression stress

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

compression test

Etaati, Amir and Dehghani, Kamran and Ebrahimi, G. R. and Wang, Hao (2013) Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations. Metals and Materials International, 19 (1). pp. 5-9. ISSN 1598-9623

compression tests

Zhu, Z. W. and Zhang, H. F. and Wang, Hao and Ding, B. Z. and Hu, Z. Q. and Huang, Han (2009) Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting. Journal of Materials Research, 24 (10). pp. 3108-3115. ISSN 0884-2914

compressive

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2013) Properties and behaviour of gomuti fibre composites under tensile and compressive load. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

compressive behaviour and modelling

Rao, Sanjeev and Banerjee, Sourish and Jayaraman, Krishnan and Bhattacharyya, Debes (2010) Compressive behavior of fibre reinforced honeycomb cores. In: 2008 IUTAM Symposium on Multi-Functional Material Structures and Systems, 10-12 Dec 2008, Bangalore, India.

compressive elastic modulus

Zhang, Zuhua and Wang, Hao and Provis, John L. and Reid, Andrew and Li, Qiang (2013) Durability of fly ash based-geopolymers: effect of crystallization on mechanical properties. In: 8th International Symposium on Cement and Concrete, 20-23 Sept 2013, Nanjing,China.

compressive properties

Kabir, Mohammad Mazedul and Wang, Hao and Lau, Alan and Cardona, Francisco and Aravinthan, Thiru (2012) Compressive properties of chemically-treated hemp fibre reinforced composites. In: Composites Australia and CRC-ACS, 2012 Conference: Diversity in Composite, 15-16 Mar 2012, Leura, Australia.

compressive strength

Lian, C. and Zhuge, Y. and Beecham, S. (2011) Modelling pervious concrete under compression loading – a discrete element approach. In: ICSBM 2011: 1st International Conference on Structures and Building Materials, 7-9 Jan 2011, Guangzhou, China.

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2011) Preliminary development of polymer based filler materials for GFRP tubular connector. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Lian, C. and Zhuge, Y. (2010) Optimum mix design of enhanced permeable concrete: an experimental investigation. Construction and Building Materials, 24 (12). pp. 2664-2671. ISSN 0950-0618

Zhuge, Yan (2010) Investigation of the effect of various additives on the strength of environmentally friendly permeable concrete. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2003) Triaxial test results of high-strength concrete subjected to cyclic loading. Magazine of Concrete Research, 55 (4). pp. 321-329. ISSN 0024-9831

computational modelling

Epaarachchi, Jayantha A. and Clausen, Philip D. (2005) A new cumulative fatigue damage model for glass fibre reinforced plastic composites under step/discrete loading. Composites Part A: Applied Science and Manufacturing, 36 (9). pp. 1236-1245. ISSN 1359-835X

computer simulation

Morgan, Michael J. and Fulcher, Robert and Ku, Harry S. (1999) Innovative residential schools for engineering degree courses. Quarterly Journal of Singapore Institute of Engineering Technologists, 18 (4). pp. 53-58. ISSN 1793-5059

concrete

Zhu, Huajun and Zhang, Zuhua and Zhu, Yingcan and Tian, Liang (2014) Durability of alkali-activated fly ash concrete: chloride penetration in pastes and mortars. Construction and Building Materials , 65. pp. 51-59. ISSN 0950-0618

Awad, Ziad K. and Yusaf, Talal F. (2011) Finite element analysis of fibre reinforce concrete beam subject to high temperature by using EURO-code models. In: ICCST8: 8th International Conference on Composite Science and Technology, 22-24 Mar 2011, Kuala Lumpur, Malaysia.

Aravinthan, T. and Heldt, T. (2010) Innovative strengthening technique using post-tensioned fibre composite wraps for bridge headstocks. Australian Journal of Structural Engineering, 11 (2). pp. 117-128. ISSN 1328-7982

Aravinthan, Thiru and Heldt, Tim (2005) Strengthening of bridge headstocks with external post-tensioning: design issues and strengthening techniques. In: Road System and Engineering Technology Forum, 9-11 August 2005, Brisbane, Australia.

concrete beam

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of glued fibre composite sandwich structure in flexure: experiment and fibre model analysis. Materials and Design, 39. pp. 458-468. ISSN 0264-1275

concrete columns

Lokuge, Weena and Setunge, Sujeeva and Sanjayan, J. G. (2003) Modelling eccentrically loaded high-strength concrete columns. Magazine of Concrete Research, 55 (4). pp. 331-341. ISSN 0024-9831

concrete deck

Manalo, A. C. and Aravinthan, T. and Mutsuyoshi, H. and Matsui, T. (2012) Composite behaviour of a hybrid FRP bridge girder and concrete deck. Advances in Structural Engineering, 15 (4). pp. 589-600. ISSN 1369-4332

Manalo, Allan and Mutsuyoshi, Hiroshi and Aravinthan, Thiru and Matsui, Takahiro (2009) Behaviour of hybrid FRP composite I-girder with concrete deck. In: FRPRCS-9: Current Challenges and Future Trends, 13-15 July 2009, Sydney, Australia.

concrete face

Bajracharya, R. M. and Lokuge, W. P. and Karunasena, W. and Lau, K. T. and Mosallam, A. S. (2013) Structural evaluation of concrete expanded polystyrene sandwich panels for slab applications. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 2012): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

concrete properties

Hussin, Manal (2012) An investigation into the effect of material composition on the fundamental properties of permeable concrete. [Thesis (PhD/Research)] (Unpublished)

concrete reinforcements

Wang, Bo and Teng, J. G. and De Lorenzis, Laura and Zhou, Li-Min and Ou, Jinping and Jin, Wei and Lau, K. T. (2009) Strain monitoring of RC members strengthened with smart NSM FRP bars. Construction and Building Materials, 23 (4). pp. 1698-1711. ISSN 0950-0618

concrete repair

Zhu, Huajun and Zhang, Zuhua and Deng, Fenggan and Cao, Yalong (2013) The effects of phase changes on the bonding property of geopolymer to hydrated cement. Construction and Building Materials, 48. pp. 124-130. ISSN 0950-0618

concrete structures

Shinozaki, Hiroo and Aravinthan, Thiru and Pandey, Govinda Raj and Mutsuyoshi, Hiroshi (2007) Advancements in retrofitting reinforced concrete structures in Japan using FRP sheets. In: 23rd Biennial Conference of the Concrete Institute of Australia: Concrete for Future, 18-20 Oct 2007, Adelaide, Australia.

Lokuge, Weena P. and Sanjayan, J. G. and Setunge, Sujeeva (2005) Stress-strain model for laterally confined concrete. Journal of Materials in Civil Engineering, 17 (6). pp. 607-616. ISSN 0899-1561

confinement

Fang, Zhengping and Shang, Shuying and Wang, Hao (2013) Confinement of C60 nanoparticles on the dynamics of polystyrene studied by anelastic spectroscopy and rheometrics. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Lokuge, Weena P. and Sanjayan, J. G. and Setunge, Sujeeva (2005) Stress-strain model for laterally confined concrete. Journal of Materials in Civil Engineering, 17 (6). pp. 607-616. ISSN 0899-1561

connection

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2013) Effect of eccentricity on the behavior of pultruded FRP bolted joint. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2013) A review of FRP composite truss systems and its connection. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22): Materials to Structures: Advancement through Innovation , 11-14 Dec 2012, Sydney, Australia.

Manalo, Allan and Mutsuyoshi, Hiroshi and Aravinthan, Thiru and Matsui, Takahiro (2009) Behaviour of hybrid FRP composite I-girder with concrete deck. In: FRPRCS-9: Current Challenges and Future Trends, 13-15 July 2009, Sydney, Australia.

connections

Manalo, Allan and Mutsuyoshi, Hiroshi (2012) Behavior of fiber-reinforced composite beams with mechanical joints. Journal of Composite Materials, 46 (4). pp. 483-496. ISSN 0021-9983

connector

Sirimanna, Chamila Sampath and Islam, Md Mainul and Aravinthan, Thiru (2011) Polymer based filler materials as infill for GFRP pile connector. In: ICCST8: 8th International Conference on Composite Science and Technology, 22-24 Mar 2011, Kuala Lumpur, Malaysia.

constant head

Lian, C. and Zhuge, Y. and Beecham, S. (2011) Evaluation of permeability of porous concrete. In: AEMT 2011: International Conference on Advanced Engineering Materials and Technology, 29-31 Jul 2011, Sanya, China.

Constitutive relations

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2004) Constitutive model for confined high strength concretes subjected to cyclic loading. Journal of materials in Civil Engineering, 16 (4). pp. 297-305. ISSN 0899-1561

construction

Manalo, Allan (2013) Fibre reinforced polymer composites sandwich structure: Recent developments and applications in civil infrastructure. In: 2013 International Research Conference on Innovations in Engineering, Science and Technology (IRCIEST 2013), 27-29 Nov 2013, Batangas State University, Batangas, Philippines.

Manalo, A. C. and Karunasena, W. and Lau, K. T. (2013) Mechanical properties of bamboo fiber-polyester composites. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Aravinthan, Thiru and Manalo, Allan (2012) Field applications and case studies of FRP in civil infrastructure: the Australian experience. In: 6th International Conference on FRP Composites in Civil Engineering (CICE 2012) , 13-15 Jun 2012, Rome, Italy.

Thorpe, David and Ryan, Neal and Charles, Michael (2008) Environmental sustainability - a driver for innovation in construction SMEs? In: 3rd International Conference of the CRC for Construction Innovation: Clients Driving Innovation: Benefiting from Innovation, 12-14 March 2008, Gold Coast, Australia.

construction industries

Charles, Michael and Furneaux, Craig and Pillay, Janet and Thorpe, David and Parades Castello, Cynthya and Brown, Kerry (2007) Uptake of an OHS Code of Practice by Australian construction firms. In: CIB World Building Congress 2007: Construction for Development, 14-17 May 2007, Cape Town, South Africa.

construction materials

Zhuge, Yan (2013) A review of aerogels and their application as a multi-functional building material. Applied Mechanics and Materials, 253-25. pp. 564-567. ISSN 1660-9336

Bolt, J. R. and Zhuge, Y. and Bullen, F. (2011) Photocatalytic construction materials: an overview of recent developments and their application to permeable concrete. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

contact angle

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

contact mechanism

Yousif, B. F. (2012) Design of newly fabricated tribological machine for wear and frictional experiments under dry/wet condition. Materials and Design. ISSN 0261-3069 (In Press)

context

Aldraho, Abdelnour and Kist, Alexander A. (2010) Heuristics for dynamic topologies to reduce power consumption of networks. In: ATNAC 2010: Australasian Telecommunication Networks and Applications Conference, 31 Oct-3 Nov 2010, Auckland, New Zealand.

controlled nucleation

Wang, Hao (2005) Semisolid structure formation and semisolid casting. Journal of Materials Science and Technology, 21 (s1). pp. 65-71. ISSN 1005-0302

controlled nucleation method

Wang, Hao and Ning, Zhiliang (2007) Magnesium thixotropic structure produced by controlled nucleation method. Tezhong Zhuzao Ji Youse Hejin (Special Casting and Nonferrous Alloys) (Sp. Is). pp. 316-319. ISSN 1001-2249

conventional ovens

Trada, Mohan and Ku, Harry and Vedhar, Jayant (2009) Flexural strength of phenol formaldehyde composites post-cured in microwaves: preliminary results. In: MFMS 2009: 2nd International Conference on Multi-functional Materials and Structures, 9-12 Oct 2009, Qingdao, China.

Ku, H. and Cardona, F. and Ball, J. and Jacobson, W. and Trada, M. (2008) Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study. Journal of Composite Materials, 42 (19). pp. 2083-2095. ISSN 0021-9983

convergence

Thota, N. M. and Epaarachchi, J. A. and Lau, K. T. (2013) Important aspects of finite element modeling of low density thermo plastic closed cell foams. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

Cook-Weisberg test

Dohnal, Ludek and Faigl, Paul (2007) Evaluation of the linearity of calibration dependence. In: Quality assurance of analytical results, 26-28 Mar 2007, (Beskydy), Czech Republic. (Unpublished)

cooling rate

Ning, Zhiliang and Cao, P. and Wang, Hao and Sun, Jianfei and Liu, Diankun (2007) Effect of cooling conditions on grain size of AZ91 alloy. Journal of Materials Science and Technology, 23 (5). pp. 645-649. ISSN 1005-0302

cooperative research centres

Butcher, Peter and Thorpe, David (2007) A review of triple helix linkages in New Zealand earthquake engineering networks and comparison with the Australian cooperative research centre model. In: Triple Helix VI: 6th Biennial International Conference on University, Industry and Government Linkages, 16-18 May 2007, Singapore.

copper mould casting

Zhu, Z. W. and Zhang, H. F. and Wang, Hao and Ding, B. Z. and Hu, Z. Q. and Huang, Han (2009) Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting. Journal of Materials Research, 24 (10). pp. 3108-3115. ISSN 0884-2914

Liu, Weili and Zhang, H. F. and Hu, Z. Q. and Wang, Hao (2005) Formation and mechanical properties of Mg65Cu25Er10 and Mg65Cu15Ag10Er10 bulk amorphous alloys. Journal of Alloys and Compounds, 397 (1-2). pp. 202-206. ISSN 0925-8388

core

Omar, T. and Aravinthan, T. and Van Erp, G. (2007) The effect of core architecture on the behaviour of sandwich columns under edgewise compression loading. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

core cracking load

Islam, M. M. and Aravinthan, T. and Van Erp, G. (2009) Behaviour of innovative fibre composite sandwich panels under point loading. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009) , 9-11 Dec 2009, Seoul, Korea.

core shear

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

correlation

Dohnal, Ludek and Faigl, Paul (2007) Evaluation of the linearity of calibration dependence. In: Quality assurance of analytical results, 26-28 Mar 2007, (Beskydy), Czech Republic. (Unpublished)

correlation coefficient

Ye, Lieping and Ma, Qianli and Miao, Zhiwei and Guan, Hong and Zhuge, Yan (2013) Numerical and comparative study of earthquake intensity indices in seismic analysis. Structural Design of Tall and Special Buildings, 22 (4). pp. 362-381. ISSN 1541-7794

corroded steel

Tawfik, Qaidar H. (2012) Rehabilitation of deteriorated steel truss members using CFRP. [Thesis (PhD/Research)] (Unpublished)

corroded steel angles

Tawfik, Qaidar H. and Karunasena, Warna (Karu) and Cardona, Francisco (2012) Strengthening of corroded steel angles using CFRP. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

corrosion

Tawfik, Qaidar H. (2012) Rehabilitation of deteriorated steel truss members using CFRP. [Thesis (PhD/Research)] (Unpublished)

Wang, Hao and Zhang, M. X. and Shi, Z. M. and Yang, Ke (2006) Biocorrosion behaviour of magnesium alloys under pseudo-physiological conditions. Tissue Engineering, 12 (4). p. 1067. ISSN 1076-3279

corrosion behavior

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

corrosion of steel

Cardona, Francisco and Tawfik, Qaidar H. and Karunasena, Karu (2012) Reinforcement of corroded steel structures with CFRP panels. In: ICACE 2012: International Conference on Architectural and Civil Engineering, 24-25 Oct 2012, Bali, Indonesia.

corrosion rate

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

corrosion resistance

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

cotton fabric

Misnon, M. I. and Bahari, S. A. and Islam, M. M. and Epaarachchi, J. A. (2013) Integration of textile fabric and coconut shell in particleboard. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

cotton fiber

Epaarachchi, J. and Ku, H. and Gohel, K. (2010) A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites. Journal of Composite Materials, 44 (6). pp. 779-788. ISSN 0021-9983

counterface materials

Yousif, B. F. and Alsofyani, I. M. and Yusaf, Talal (2010) Adhesive wear and frictional characteristics of UHMWPE and HDPE sliding against different counterfaces under dry contact condition. Tribology, 4 (2). pp. 78-85. ISSN 1751-5831

coupon test

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2012) Mechanical properties characterization of the skin and core of a novel composite sandwich structure. Journal of Composite Materials. ISSN 0021-9983 (In Press)

coupons

Manalo, Allan and Mutsuyoshi, Hiroshi and Matsui, Takahiro (2012) Testing and characterization of thick hybrid fibre composites laminates. International Journal of Mechanical Sciences , 63 (1). pp. 99-109. ISSN 0020-7403

CPF resins

Cardona, Francisco and Lau, Alan Kin-Tak and Fedrigo, Jessica (2012) Novel phenolic resins with improved mechanical and toughness properties. Journal of Applied Polymer Science, 123 (4). pp. 2131-2139. ISSN 0021-8995

crack

Islam, Md Mainul and Kim, Ho Sung (2012) Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior. Journal of Sandwich Structures and Materials, 14 (1). pp. 111-127. ISSN 1099-6362

Islam, Md Mainul and Kim, Ho Sung (2010) Manufacturing and behaviour of sandwich composites made of starch as binder for core and adhesive between core and skins. In: 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010), 24-26 Sept 2010, Kottayam, Kerala, India.

cracked beam

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru and Luther, Stephen (2006) Shear strengthening of cracked RC beam using external post-tensioning. In: 19th Australasian Conference on the Mechanics of Structures and Materials, 29 Nov - 1 Dec 2006, Christchurch, NZ.

cracking

Aravinthan, Thiru and Suntharavadivel, T. G. (2007) Effects of existing shear damage on externally post tensioned repair of bent caps. Journal of Structural Engineering, 133 (11). pp. 1662-1669. ISSN 0733-9445

cracking opening angle

Goh, S. and Ku, H. and Ang, S. L. (2008) Prediction of crushing stress in composite materials. Journal of Composite Materials, 42 (5). pp. 467-484. ISSN 0021-9983

cracks

Epaarachchi, J. A. (2009) Change of dynamic response of pultruded composite components used in advanced composite structures due to fatigue and fracture. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Karunasena, W. (2008) Elastodynamic reciprocity relations for wave scattering by flaws in fiber-reinforced composite plates. Journal of Mechanics of Materials and Structures, 3 (10). pp. 1831-1846. ISSN 1559-3959

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2006) Effect of existing cracks in concrete bridge members strengthened by external post-tensioning. In: FIB 2006: 2nd Congress (Federation Internationale du Beton), 5-8 Jun 2006, Naples, Italy.

Aravinthan, Thiru (2006) Is external post-tensioning an effective solution for shear strengthening of bridge elements? In: Structural Faults + Repair 2006: Eleventh International Conference on ‘Extending the Life of Bridges Concrete + Composites Buildings, Masonry + Civil Structures', 13-15 June 2006, Edinburgh, UK.

CRC

Butcher, Peter and Thorpe, David (2007) A review of triple helix linkages in New Zealand earthquake engineering networks and comparison with the Australian cooperative research centre model. In: Triple Helix VI: 6th Biennial International Conference on University, Industry and Government Linkages, 16-18 May 2007, Singapore.

credit transfer

Morgan, M. J. and Fulcher, R. L. and Ku, H. S. (1998) Articulation, credit transfer and flexible delivery of engineering degree courses: Australia, Malaysia and Hong Kong. Jurutera: Institution of Engineers Malaysia Monthly Bulletin, 1998 (1). pp. 57-67. ISSN 0126-513X

creep

Epaarachchi, J. A. (2011) The effect of viscoelasticity on fatigue behaviour of polymer matrix composites. In: Creep and fatigue in polymer matrix composites. Woodhead Publishing Ltd, Cambridge, United Kingdom, pp. 492-513. ISBN 978 1 84569 656 6; eISBN 978-0-85709-043-0

critical length

Alsaeed, T. and Alajmi, A. and Yousif, B. F. and Ku, H. and Lau, Alan Kin-tak (2012) Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

cross link density

Munoz, J.-C. and Ku, H. and Cardona, F. and Rogers, D. (2008) Effects of catalysts and post-curing conditions in the polymer network of epoxy and phenolic resins: preliminary results. Journal of Materials Processing Technology, 202 (1-3). pp. 486-492. ISSN 0924-0136

cross-link density

Cardona, F. and Rogers, D. and Davey, S. and Van Erp, G. (2007) Investigation of the effect of styrene content on the ultimate curing of vinylester resins by TGA-FTIR. Journal of Composite Materials, 41 (2). pp. 137-152. ISSN 0021-9983

crosslink density

Cardona, Francisco and Lau, Alan Kin-Tak and Fedrigo, Jessica (2012) Novel phenolic resins with improved mechanical and toughness properties. Journal of Applied Polymer Science, 123 (4). pp. 2131-2139. ISSN 0021-8995

Cardona, Francisco and Aravinthan, Thiru and Fedrigo, Jessica and Moscou, Clarisse (2010) Synthesis of phenolic bio-resins for advanced composites in civil engineering structures. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Cardona, F. and Aravinthan, T. and Moscou, C. (2010) Modified PF resins for composite structures with improved mechanical properties. Polymers and Polymer Composites, 18 (6). pp. 297-306. ISSN 0967-3911

Cardona, F. and Rogers, D. and Van Erp, G. (2007) Investigation by TGA-FTIR of the effect of styrene content and thickness on the UV-curing of vinylester resins. Journal of Thermoplastic Composite Materials, 20 (6). pp. 601-615. ISSN 0892-7057

crushing stress

Goh, S. and Ku, H. and Ang, S. L. (2008) Prediction of crushing stress in composite materials. Journal of Composite Materials, 42 (5). pp. 467-484. ISSN 0021-9983

crystal

Yao, X. and Wang, H. and He, B. and Zhou, X. (2006) Numerical simulation of dendrite growth during solidification. International Journal of Nonlinear Sciences and Numerical Simulation, 7 (2). pp. 171-176. ISSN 1565-1339

crystalline phase

Zhu, Z. W. and Zhang, H. F. and Wang, Hao and Ding, B. Z. and Hu, Z. Q. and Huang, Han (2009) Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting. Journal of Materials Research, 24 (10). pp. 3108-3115. ISSN 0884-2914

crystallization

Zhu, Huajun and Zhang, Zuhua and Deng, Fenggan and Cao, Yalong (2013) The effects of phase changes on the bonding property of geopolymer to hydrated cement. Construction and Building Materials, 48. pp. 124-130. ISSN 0950-0618

crystallization behaviour

Wang, Hao and Song, Xiaoping and Yao, Xiangdong and Zhang, Haifeng and Hu, Zhuangqui (2005) Crystallization behavior of (Cu60Zr30Ti10)99Sn1 bulk metallic glass. Journal of Materials Science & Technology, 21 (s 1). pp. 51-53. ISSN 1005-0302

crystallographic

Yao, X. and Wang, H. and He, B. and Zhou, X. (2006) Numerical simulation of dendrite growth during solidification. International Journal of Nonlinear Sciences and Numerical Simulation, 7 (2). pp. 171-176. ISSN 1565-1339

CTBN

Faigl, Pavel and Rogers, David and Maurin, Romain and Van Erp, Gerard (2007) Plant based resins for fibre composites. In: 4th Annual Composites Australia and Composites CRC Conference (CRC 2007): New Technology Taking Shape, 19-20 Apr 2007, Gold Coast, Australia.

Cu based BMG

Wang, Hao and Song, Xiaoping and Yao, Xiangdong and Zhang, Haifeng and Hu, Zhuangqui (2005) Crystallization behavior of (Cu60Zr30Ti10)99Sn1 bulk metallic glass. Journal of Materials Science & Technology, 21 (s 1). pp. 51-53. ISSN 1005-0302

Cu-based

Fu, H. M. and Zhang, H. F. and Wang, Hao and Hu, Z. Q. (2007) Multifarious fracture features of CuZrAlGd(Ag) bulk metallic glasses. Advanced Materials Research, 29-30. pp. 47-50. ISSN 1022-6680

Cu-based BMG

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2006) In-situ Cu-based bulk metallic glass composite. International Journal of Modern Physics B, 20 (25-27). pp. 3963-3968. ISSN 0217-9792

Cu/Al composite

Yu, Bao Yi and Wang, Qing and Li, Qiang and Wu, Yu Juan and Chen, Yan (2013) Interface microstructure and mechanical properties of copper/aluminum composite material. In: 3rd International Conference on Advanced Engineering Materials and Technology (AEMT 2013), 11-12 May 2013, Zhangjiajie, China.

cumulative damage

Epaarachchi, Jayantha A. (2006) A study of estimation of damage accumulation of glass fibre reinforce plastic (GFRP) composites under a block loading situation. Composite Structures, 75 (1-4). pp. 88-92. ISSN 0263-8223

Epaarachchi, Jayantha A. and Clausen, Philip D. (2005) A new cumulative fatigue damage model for glass fibre reinforced plastic composites under step/discrete loading. Composites Part A: Applied Science and Manufacturing, 36 (9). pp. 1236-1245. ISSN 1359-835X

cure shrinkage

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan (2014) Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts. Journal of Multifunctional Composites, 2 (1). pp. 61-66. ISSN 2168-4246

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak (2013) Cure shrinkage in epoxy grouts for grouted repairs. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

curing

Ku, H. and Prajapati, M. and Trada, M. (2012) Fracture toughness of vinyl ester composites reinforced with sawdust and postcured in microwaves. International Journal of Microwave Science and Technology, 2012 (Articl). ISSN 1687-5826

curing of polymers

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru (2012) Cure kinetic study of epoxidized hemp oil cured with a multiple catalytic system. Journal of Applied Polymer Science, 125 (S2). E511-E517. ISSN 0021-8995

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru and Cooney, Tyson (2011) Cure kinetics of an epoxidized hemp oil based bioresin system. Journal of Applied Polymer Science, 122 (1). pp. 444-451. ISSN 0021-8995

curriculum

Khattak, Hamid and Ku, Harry and Goh, Steven (2012) Courses for teaching leadership capacity in professional engineering degrees in Australia and Europe. European Journal of Engineering Education, 37 (3). pp. 279-296. ISSN 0304-3797

Cyclic loads

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2004) Constitutive model for confined high strength concretes subjected to cyclic loading. Journal of materials in Civil Engineering, 16 (4). pp. 297-305. ISSN 0899-1561

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2003) Triaxial test results of high-strength concrete subjected to cyclic loading. Magazine of Concrete Research, 55 (4). pp. 321-329. ISSN 0024-9831

cyclic stability

Bose, Saswata and Kim, Nam Hoon and Kuila, Tapas and Lau, Kin-tak and Lee, Joong Hee (2011) Electrochemical performance of a graphene–polypyrrole nanocomposite as a supercapacitor electrode. Nanotechnology, 22 (29). p. 5202. ISSN 0957-4484

cylindrical specimens

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

damage accumulation

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

damage detection

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Lau, K. T. (2013) Indexing damage using distortion of embedded FBG sensor response spectra. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

damage mechanics

Epaarachchi, Jayantha A. and Clausen, Philip D. (2003) An empirical model for fatigue behavior prediction of glass fibre-reinforced plastic (GFRP) composites for various stress ratios and test frequencies. Composites Part A: Applied Science and Manufacturing, 34 (4). pp. 313-326. ISSN 1359-835X

damage tolerance

Guades, Ernesto and Aravinthan, Thiru and Manalo, Allan and Islam, Mainul (2013) Experimental investigation on the behaviour of square FRP composite tubes under repeated axial impact. Composite Structures, 97. pp. 211-221. ISSN 0263-8223

damping

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2010) Investigation of frequency characteristics of GFRP/phenolic sandwich beams. In: 2010 Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

date palm

Aldousiri, B. and Alajmi, M. and Shalwan, A. (2013) Mechanical properties of palm fibre reinforced recycled HDPE. Advances in Materials Science and Engineering , 2013. pp. 1-7. ISSN 1687-8434

date palm fibre

Alsaeed, T. and Alajmi, A. and Yousif, B. F. and Ku, H. and Lau, Alan Kin-tak (2012) Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

debonding

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2013) Dynamic behaviour of debonded GFRP composite beams. Journal of Multifunctional Composites, 1 (2). pp. 113-122. ISSN 2168-4246

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2013) Effect of skin-core debonding on the dynamic behaviour of GFRP composite beams. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Zhuge, Y. and Yeap, K. X. (2011) Assessment of debonding failure models for FRP retrofitted URM structures. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials , 7-10 Dec 2010, Melbourne, Australia.

Karunasena, Warna (2010) The effect of debonding on the natural frequencies of laminated fibre composite sandwich plates. In: 6th Australasian Congress on Applied Mechanics (ACAM 6) , 12-15 Dec 2010, Perth, Western Australia.

Karunasena, W. and Aravinthan, T. and Manalo, A. C. (2009) Vibration of debonded laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

Zhuge, Yan and Yeap, Kai (2009) Debonding characteristics of masonry structures retrofitted with FRP. In: 17th Annual International Conference on Composites or Nano Engineering ICCE17, 26 Jul-1 Aug 2009, Honolulu, Hawaii, USA.

Karunasena, Warna (Karu) and Martin, Nicole (2007) The effect of debonding on the flexural behaviour of reinforced concrete beams strengthened with fibre reinforced polymer. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

Pandey, G. R. and Mutsuyoshi, H. and Aravinthan, T. (2007) Retrofitting reinforced concrete bridge frames using externally bonded FRP sheets. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

debonds

Karunasena, W. and Jayatilake, I. and Lokuge, W. (2013) Free vibration behaviour of fibre composite sandwich beams with debonds. In: 4th International Conference on Structural Engineering and Construction Management 2013 (ICSECM 2013), 13-15 Dec 2013, Kandy, Sri Lanka.

decking

Manalo, Allan and Maranan, Ginghis and Van Erp, Gerard (2013) Glue-laminated composite sandwich beams for structural engineering and construction. In: Thirteenth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC13), 11-13 Sept 2013, Sapporro, Japan.

deflection

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2013) Smart structure for small wind turbine blade. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

deformation

Etaati, Amir and Dehghani, Kamran (2013) A study on hot deformation behavior of Ni-42.5Ti-7.5Cu alloy. Materials Chemistry and Physics, 140 (1). pp. 208-215. ISSN 0254-0584

Wang, Hao and Ning, Zhiliang (2009) Deformation behaviour of aluminium alloy A356 in semisolid state. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

deformation behaviour

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

deformation mechanism

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

deformation mechanisms

Li, Xiao-Feng and Lau, Kin-Tak and Yin, Yan-Sheng (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology, 68 (14). pp. 2876-2881. ISSN 0266-3538

degradability

Ho, Mei-po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

degradation

Wang, Hao and Zhang, M. X. and Shi, Z. M. and Yang, Ke (2006) Biocorrosion behaviour of magnesium alloys under pseudo-physiological conditions. Tissue Engineering, 12 (4). p. 1067. ISSN 1076-3279

degumming

Ho, Mei-po and Wang, Hao and Lau, Kin-tak (2012) Thermal properties and structure conformation on silkworm silk fibre. In: Composites Australia and CRC-ACS, 2012 Conference: Diversity in Composite, 15-16 Mar 2012, Leura, Australia.

delaminated composite beams

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

delamination

Karunasena, Warna (2010) The effect of debonding on the natural frequencies of laminated fibre composite sandwich plates. In: 6th Australasian Congress on Applied Mechanics (ACAM 6) , 12-15 Dec 2010, Perth, Western Australia.

Epaarachchi, Jayantha A. and Rathnaweera, Gayan and Canning, John and Stevenson, Michael (2010) Response Fibre Bragg Grating (FBG) strain sensors embedded at different locations through the thickness around a delamination in a composite lamina. In: 7th Asian-Australasian Conference on Composites (ACCM7), 15-18 Nov 2010, Taipei, Taiwan.

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

delaminations

Karunasena, W. (2008) Elastodynamic reciprocity relations for wave scattering by flaws in fiber-reinforced composite plates. Journal of Mechanics of Materials and Structures, 3 (10). pp. 1831-1846. ISSN 1559-3959

dendrite

Yao, X. and Wang, H. and He, B. and Zhou, X. (2006) Numerical simulation of dendrite growth during solidification. International Journal of Nonlinear Sciences and Numerical Simulation, 7 (2). pp. 171-176. ISSN 1565-1339

deployable

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2007) Innovative all composite multi-pultrusion truss system for stressed arch deployable shelters. In: AICSGE 6: 6th Alexandria International Conference on Structural and Geotechnical Engineering, 15-17 Apr 2007, Alexandria, Egypt.

Omar, T. and Van Erp, G. and Key, P. (2007) Modular deployable composite shelters - truss system. In: ACIC 2007: Advanced Composites in Construction Conference , 2-4 Apr 2007, Bath, UK.

Omar, T. and Van Erp, G. and Key, P. W. (2006) Stressed arch modular deployable composite shelters: concept and development. In: CICE 2006: 3rd International Conference on FRP Composites in Civil Engineering, 13-15 Dec 2006, Miami, Fl, USA.

deployable shelters

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2008) M2S2 modular deployable shelter system: concept and analysis technique. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

deployable structures

Omar, T. and Heldt, T. and Key, P. and Van Erp, G. (2005) Development of modular deployable composite shelters. In: ASEC 2005: 5th Australian Structural Engineering Conference , 11-14 Sep 2005, Newcastle, Australia.

design

Alsaeed, T. and Yousif, B. F. and Ku, H. (2013) The potential of using date palm fibres as reinforcement for polymeric composites. Materials and Design, 43. pp. 177-184. ISSN 0264-1275

Zhuge, Yan and Brodie, Lyn and Mills, Julie (2012) The effectiveness of team project work for distance education students. In: 8th International CDIO Conference (Conceive Design Implement Operate 2012), 1-4 Jul 2012, Brisbane, Australia.

Yousif, B. F. (2012) Design of newly fabricated tribological machine for wear and frictional experiments under dry/wet condition. Materials and Design. ISSN 0261-3069 (In Press)

Zhuge, Y. and Mills, J. (2011) Modelling of multi-panel transmission tower retrofitted with leg reinforcement. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Awad, Ziad K. and Gonzalez, Felipe and Aravinthan, Thiru (2010) Advanced robust design optimization of FRP sandwich floor panels. IOP Conference Series: Materials Science and Engineering, 10 (1). 012182,1-012182,9. ISSN 1757-899X

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2009) Finite element analysis of fibre composite sandwich panel. In: Southern Engineering Conference, 17-18 Oct 2009, Springfield, Queensland, Australia.

design methods

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Karu (2012) Prediction of the flexural behavior of fibre composite sandwich beams. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Ayers, Stephen R. and van Erp, Gerard (2004) A Code of Practice for the structural design of fibre composites. Proceedings of the Institution of Civil Engineers, Structures & Buildings, 157 (1). pp. 3-8. ISSN 1751-7702

design model

Zhuge, Y. (2010) FRP-retrofitted URM walls under in-plane shear: review and assessment of available models. Journal of Composites for Construction, 14 (6). pp. 743-753. ISSN 1090-0268

design optimisation

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2013) Multi-objective design optimisation of GFRP sandwich beams. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

design optimization

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2012) A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials and Design, 33 (1). pp. 534-544. ISSN 0264-1275

design principles

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of glued fibre composite sandwich structure in flexure: experiment and fibre model analysis. Materials and Design, 39. pp. 458-468. ISSN 0264-1275

destructive testing

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Manalo, Allan (2013) Geometry and restraint effects on the bending behaviour of the glass fibre reinforced polymer sandwich slabs under point load. Materials and Design, 45. pp. 125-134. ISSN 0264-1275

detection technique

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

deterioration

Tawfik, Qaidar H. (2012) Rehabilitation of deteriorated steel truss members using CFRP. [Thesis (PhD/Research)] (Unpublished)

developments

Omar, T. and Heldt, T. and Key, P. and Van Erp, G. (2005) Development of modular deployable composite shelters. In: ASEC 2005: 5th Australian Structural Engineering Conference , 11-14 Sep 2005, Newcastle, Australia.

Dexamethasones

Chen, Ling and Tang, Chak Yin and Ku, Harry Siu Lung and Chen, Da Zhu and Tsui, Chi Pong (2013) Surface coating of poly-D-L-lactide/nano-hydroxyapatite composite scaffolds for dexamethasone-releasing function and wettability enhancement. In: Materials Science and Technology Conference (MS&T 2012): Next Generation Biomaterials and Surface Properties of Biomaterials , 27-31 Oct 2012, Pittsburgh, PA. United States.

dielectric constant

Ku, Harry S. and Ball, James A. R. and Siores, Elias and Horsfield, Brendan (1999) Microwave processing and permittivity measurement of thermoplastic composites at elevated temperature. Journal of Materials Processing Technology, 89-90. pp. 419-424. ISSN 0924-0136

dielectric loss

Ku, Harry S. and Ball, James A. R. and Siores, Elias and Horsfield, Brendan (1999) Microwave processing and permittivity measurement of thermoplastic composites at elevated temperature. Journal of Materials Processing Technology, 89-90. pp. 419-424. ISSN 0924-0136

dielectric loss tangent

Ku, H. and Wong, P. and Maxwell, A. and Huang, J. and Fung, H. and Mohan, T. (2011) A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

Ku, H. and Cardona, F. and Ball, J. and Jacobson, W. and Trada, M. (2008) Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study. Journal of Composite Materials, 42 (19). pp. 2083-2095. ISSN 0021-9983

differential scanning calorimetry

Francucci, Gaston and Cardona, Francisco and Manthey, Nathan W. (2013) Cure kinetics of an acrylated epoxidized hemp oil-based bioresin system. Journal of Applied Polymer Science, 128 (3). pp. 2030-2037. ISSN 0021-8995

differential scanning calorimetry (DSC)

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru (2012) Cure kinetic study of epoxidized hemp oil cured with a multiple catalytic system. Journal of Applied Polymer Science, 125 (S2). E511-E517. ISSN 0021-8995

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru and Cooney, Tyson (2011) Cure kinetics of an epoxidized hemp oil based bioresin system. Journal of Applied Polymer Science, 122 (1). pp. 444-451. ISSN 0021-8995

Liu, Weili and Zhang, H. F. and Hu, Z. Q. and Wang, Hao (2005) Formation and mechanical properties of Mg65Cu25Er10 and Mg65Cu15Ag10Er10 bulk amorphous alloys. Journal of Alloys and Compounds, 397 (1-2). pp. 202-206. ISSN 0925-8388

differential scanning calorimetry (photo-DSC)

Cheung, Hoi-Yan and Lau, Kin-tak and Tao, Xiao-Ming and Hui, David (2008) A potential material for tissue engineering: silkworm silk/PLA biocomposite. Composites Part B: Engineering, 39 (6). pp. 1026-1033. ISSN 1359-8368

dimensional control

Islam, M. M. and Kim, H. S. (2009) An overview on manufacturing and properties of syntactic foams made of ceramic hollow microspheres and starch. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Direct Shear Test

Zhuge, Yan and Yeap, Kai (2009) Debonding characteristics of masonry structures retrofitted with FRP. In: 17th Annual International Conference on Composites or Nano Engineering ICCE17, 26 Jul-1 Aug 2009, Honolulu, Hawaii, USA.

disaster

Lokuge, Weena and Setunge, Sujeeva (2013) Evaluating disaster resilience of bridge infrastructure when exposed to extreme natural events. In: 3rd International Conference on Building Resilience 2013: Individual, Institutional and Societal Coping Strategies to Address the Challenges Associated with Disaster Risk, 17-19 Sep 2013, Heritance Ahungalla, Sri Lanka .

discrete element modelling

Lian, C. and Zhuge, Y. and Beecham, S. (2011) Modelling pervious concrete under compression loading – a discrete element approach. In: ICSBM 2011: 1st International Conference on Structures and Building Materials, 7-9 Jan 2011, Guangzhou, China.

disinfection

Al-Juboori, Raed and Aravinthan, Vasantha and Yusaf, Talal (2010) A review of common and alternative methods for disinfection of microorganisms in water. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

disinfection by-product

Al-Juboori, Raed and Aravinthan, Vasantha and Yusaf, Talal (2010) A review of common and alternative methods for disinfection of microorganisms in water. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

dislocation sliding

Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275

dispersion stability

Park, Ok-kyung and Kim, Nam Hoon and Lau, Kin-Tak and Lee, Joong Hee (2010) Effect of surface treatment with potassium persulfate on dispersion stability of multi-walled carbon nanotubes. Materials Letters, 64 (6). pp. 718-721. ISSN 0167-577X

dissolution

Zhang, Z. and Wang, H. and Yao, X. and Zhu, Y. (2012) Effects of halloysite in kaolin on the formation and properties of geopolymers. Cement and Concrete Composites, 34 (5). pp. 709-715. ISSN 0958-9465

distance education

Zhuge, Yan and Brodie, Lyn and Mills, Julie (2012) The effectiveness of team project work for distance education students. In: 8th International CDIO Conference (Conceive Design Implement Operate 2012), 1-4 Jul 2012, Brisbane, Australia.

distance students

Manalo, Allan and Aravinthan, Thiru (2012) Peer assisted learning in an online postgraduate course on engineered fibre composites. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

distortion

Peauril, J. and Epaarachchi, J. and Lau, K. T. and Wang, H. (2013) Embedded fibre optic sensors under multi-axial loading: a pilot study. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

distribution method

Ku, H. and Fulcher, R. (2012) Using computer software packages to enhance the teaching in engineering management science: part 2 - programming techniques. Computer Applications in Engineering Education, 20 ( 1). pp. 114-123. ISSN 1099-0542

dominant frequency

Choy, Y. S. and Liu, Y. and Cheung, H. Y. and Xi, Q. and Lau, K. T. (2012) Development of composite plate for compact silencer design. Journal of Sound and Vibration, 331 (10). pp. 2348-2364. ISSN 0022-460X

dough

Islam, Md Mainul and Kim, Ho Sung (2007) Manufacture of syntactic foams: pre-mold processing. Materials and Manufacturing Processes, 22 (1). pp. 28-36. ISSN 1042-6914

driveability

Guades, Ernesto and Aravinthan, Thiru and Islam, Mainul and Manalo, Allan (2012) A review on the driving performance of FRP composite piles. Composite Structures, 94 (6). pp. 1932-1942. ISSN 0263-8223

Guades, Ernesto Jusayan and Aravinthan, Thiru and Islam, Md Mainul (2010) An overview on the application of FRP composites in piling system. In: 2010 Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Queensland, Australia.

drop weight impact strength

Ku, H. and Trada, M. and Puttgunta, V. C. (2007) Mechanical properties of vinyl ester composites cured by microwave irradiation: pilot study. Key Engineering Materials, 334-33. pp. 537-540. ISSN 1013-9826

drop-weight test

Guades, Ernesto J. and Aravinthan, Thiru and Islam, Md. Mainul and Manalo, Allan C. (2012) Stiffness of FRP pultruded tubes under repeated axial impacts. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

ductility

Fu, H. M. and Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2006) In situ TiB-reinforced cu-based bulk metallic glass composites. Scripta Materialia, 54 (11). pp. 1961-1966. ISSN 1359-6462

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2006) In-situ Cu-based bulk metallic glass composite. International Journal of Modern Physics B, 20 (25-27). pp. 3963-3968. ISSN 0217-9792

Fu, H. M. and Zhang, H. F. and Wang, Hao and Zhang, Qingsheng and Hu, Z. Q. (2005) Synthesis and mechanical properties of Cu-based bulk metallic glass composites containing in-situ TiC particles. Scripta Materialia, 52 (7). pp. 669-673. ISSN 1359-6462

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2004) Constitutive model for confined high strength concretes subjected to cyclic loading. Journal of materials in Civil Engineering, 16 (4). pp. 297-305. ISSN 0899-1561

durability

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2014) An overview of mechanical properties and durability of glass-fibre reinforced recycled mixed plastic waste composites. Materials and Design, 62. pp. 98-112. ISSN 0264-1275

Zhu, Huajun and Zhang, Zuhua and Zhu, Yingcan and Tian, Liang (2014) Durability of alkali-activated fly ash concrete: chloride penetration in pastes and mortars. Construction and Building Materials , 65. pp. 51-59. ISSN 0950-0618

Zhang, Zuhua and Wang, Hao and Provis, John L. and Reid, Andrew and Li, Qiang (2013) Durability of fly ash based-geopolymers: effect of crystallization on mechanical properties. In: 8th International Symposium on Cement and Concrete, 20-23 Sept 2013, Nanjing,China.

Guades, Ernesto Jusayan and Aravinthan, Thiru and Islam, Md Mainul (2010) An overview on the application of FRP composites in piling system. In: 2010 Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Queensland, Australia.

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2010) Temperature effects on full scale FRP bridge using innovative composite components. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

dynamic behavior

Karunasena, W. and Jayatilake, I. and Lokuge, W. (2013) Free vibration behaviour of fibre composite sandwich beams with debonds. In: 4th International Conference on Structural Engineering and Construction Management 2013 (ICSECM 2013), 13-15 Dec 2013, Kandy, Sri Lanka.

dynamic behaviour

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2013) Dynamic behaviour of debonded GFRP composite beams. Journal of Multifunctional Composites, 1 (2). pp. 113-122. ISSN 2168-4246

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2013) Effect of skin-core debonding on the dynamic behaviour of GFRP composite beams. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

dynamic mechanical analysis

Francucci, G. and Manthey, N. W. and Cardona, F. and Aravinthan, T. (2014) Processing and characterization of 100% hemp-based biocomposites obtained by vacuum infusion. Journal of Composite Materials , 48 (11). pp. 1323-1335. ISSN 0021-9983

Manthey, Nathan W. and Cardona, Francisco and Francucci, Gaston and Aravinthan, Thiru (2013) Thermo-mechanical properties of epoxidized hemp oil-based bioresins and biocomposites. Journal of Reinforced Plastics and Composites , 32 (19). pp. 1444-1456. ISSN 0731-6844

Ho, Mei-po and Wang, Hao and Ho, Chun-kit and Lau, Kin-tak (2012) A study on the dynamic mechanical properties of silk fibre composites. Advanced Materials Research, 410. pp. 106-109. ISSN 1022-6680

dynamic mechanical analysis (DMTA)

Cheung, Hoi-Yan and Lau, Kin-tak and Tao, Xiao-Ming and Hui, David (2008) A potential material for tissue engineering: silkworm silk/PLA biocomposite. Composites Part B: Engineering, 39 (6). pp. 1026-1033. ISSN 1359-8368

dynamic mechanical properties

Zhao, Yong-Qing and Cheung, Hoi-Yan and Lau, Kin-Tak and Xu, Cai-Ling and Zhao, Dan-Dan and Li, Hu-Lin (2010) Silkworm silk/poly(lactic acid) biocomposites: dynamic mechanical, thermal and biodegradable properties. Polymer Degradation and Stability, 95 (10). pp. 1978-1987. ISSN 0141-3910

dynamic mechanical property

Ho, Mei-po and Wang, Hao and Ho, Chun-kit and Lau, Kin-tak (2012) A study on the dynamic mechanical properties of silk fibre composites. Advanced Materials Research, 410. pp. 106-109. ISSN 1022-6680

dynamic mechanical thermal analysis

Ku, H. and Cardona, F. and Rogers, D. and Munoz, J.-C. (2010) Development of polymer network of phenolic and epoxies resins mixed with linseed oil: pilot study. Journal of Materials Engineering and Performance, 19 (6). pp. 912-919. ISSN 1059-9495

dynamic mechanical thermal analysis (DMTA)

Ku, H. and Maxwell, A. and Wong, P. and Huang, J. and Fung, H. (2011) Relationship between electrical and mechanical loss tangents of hollow glass powder reinforced epoxy composites: a pilot study. Journal of Applied Polymer Science , 119 (5). pp. 2945-2952. ISSN 0021-8995

dynamic stress

Lau, Sindy Mei-Ling and Lau, Kin-Tak and Yin, Yan-Sheng and Li, Lan and Wong, May and Chan, Kevin and Chen, William (2010) A shape memory alloy energy absorber for backpack design. Materials and Manufacturing Processes, 25 (4). pp. 281-286. ISSN 1042-6914

dynamic stress analysis

Awad, Ziad K. and Yusaf, Talal (2012) Fibre composite railway sleeper design by using FE approach and optimization techniques. Structural Engineering and Mechanics, 41 (2). pp. 231-242. ISSN 1225-4568

earthquake

Butcher, Peter and Thorpe, David (2007) A review of triple helix linkages in New Zealand earthquake engineering networks and comparison with the Australian cooperative research centre model. In: Triple Helix VI: 6th Biennial International Conference on University, Industry and Government Linkages, 16-18 May 2007, Singapore.

earthquake intensity index

Ye, Lieping and Ma, Qianli and Miao, Zhiwei and Guan, Hong and Zhuge, Yan (2013) Numerical and comparative study of earthquake intensity indices in seismic analysis. Structural Design of Tall and Special Buildings, 22 (4). pp. 362-381. ISSN 1541-7794

earthquakes

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2003) Triaxial test results of high-strength concrete subjected to cyclic loading. Magazine of Concrete Research, 55 (4). pp. 321-329. ISSN 0024-9831

eccentricity

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2013) Effect of eccentricity on the behavior of pultruded FRP bolted joint. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Islam, Md Mainul and Aravinthan, Thiru and Williams, Paul Garreth (2012) Behaviour of pultruded FRP hollow sections under eccentric loading. In: 6th International Conference on FRP Composites in Civil Engineering (CICE 2012), 13-15 Jun 2012, Rome, Italy.

edgewise

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2013) Shear behaviour of glued structural fibre composite sandwich beams. Construction and Building Materials, 47. pp. 1317-1327. ISSN 0950-0618

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of full-scale railway turnout sleepers from glue-laminated fibre composite sandwich structures. Journal of Composites for Construction, 16 (6). pp. 724-736. ISSN 1090-0268

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) Flexural behaviour of glue-laminated fibre composite sandwich beams. Composite Structures, 92 (11). pp. 2703-2711. ISSN 0263-8223

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) In-plane shear behaviour of fibre composite sandwich beams using asymmetrical beam shear test. Construction and Building Materials, 24 (10). pp. 1952-1960. ISSN 0950-0618

Manalo, A. C. and Aravinthan, T. and Karunasena, W. and Islam, M. M. (2010) Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions. Composite Structures, 92 (4). 984-995 . ISSN 0263-8223

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2009) Flexural behaviour of laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Islam, Mainul (2009) Flexural behaviour of composite sandwiches for structural applications. In: FRPRCS-9: Current Challenges and Future Trends, 13-15 Jul 2009, Sydney, Australia.

effect

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2010) Temperature effects on full scale FRP bridge using innovative composite components. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

effective heat conductivity

Li, Qiang and Wang, Hao and Bullen, Frank and Reid, Andrew (2012) Numerical simulation of porous structure in foam concrete on thermal insulation property. In: 8th Asian-Australasian Conference on Composite Materials, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

effective heat conductivity

Li, Qiang and Wang, Hao and Zhang, Zuhua and Reid, Andrew (2013) Numerical simulation of porosity on thermal properties and fire resistance of foamed concrete. Journal of Sustainable Cement-Based Materials. pp. 1-7. ISSN 2165-0373 (In Press)

effective length

Zhuge, Yan and Yeap, Kai (2009) Debonding characteristics of masonry structures retrofitted with FRP. In: 17th Annual International Conference on Composites or Nano Engineering ICCE17, 26 Jul-1 Aug 2009, Honolulu, Hawaii, USA.

effective specific heat

Li, Qiang and Wang, Hao and Zhang, Zuhua and Reid, Andrew (2013) Numerical simulation of porosity on thermal properties and fire resistance of foamed concrete. Journal of Sustainable Cement-Based Materials. pp. 1-7. ISSN 2165-0373 (In Press)

Li, Qiang and Wang, Hao and Bullen, Frank and Reid, Andrew (2012) Numerical simulation of porous structure in foam concrete on thermal insulation property. In: 8th Asian-Australasian Conference on Composite Materials, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

efflorescence

Zhang, Zuhua and Wang, Hao and Provis, John L. and Reid, Andrew (2013) Efflorescence: A critical challenge for geopolymer applications? In: Concrete 2013: Understanding Concrete, 16-18 Oct 2013, Gold Coast, Australia.

EHO

Manthey, Nathan William (2013) Development of hemp oil based bioresins for biocomposites. [Thesis (PhD/Research)] (Unpublished)

elastic modulus

Lau, Mei-ling and Lau, Kin-tak and Ku, Harry and Bahattacharyya, Debes and Lee, Joong-Hee (2012) Assessing heat-treatment effects on bovine cortical bones by nanoindentation. In: PFAM 20: 20th International Symposium on Processing and Fabrication of Advanced Materials , 15-18 Dec 2011, Hong Kong.

elastic properties

Lau, Sindy Mei-Ling and Lau, Kin-Tak and Yin, Yan-Sheng and Li, Lan and Wong, May and Chan, Kevin and Chen, William (2010) A shape memory alloy energy absorber for backpack design. Materials and Manufacturing Processes, 25 (4). pp. 281-286. ISSN 1042-6914

electric fields

Liu, Liwi and Liu, Yanju and Leng, Jinsong and Lau, Kin-tak (2011) Electromechanical stability of compressible dielectric elastomer actuators. Smart Materials and Structures, 20 (11). p. 115015. ISSN 0964-1726

electrical loss tangent

Ku, H. and Trada, M. and Tai, P. (2013) Dielectric properties of sawdust reinforced epoxy composites post-cured in microwaves. Journal of Reinforced Plastics and Composites, 32 (10). pp. 765-774. ISSN 0731-6844

electrical losses

Ku, H. and Cardona, F. and Ball, J. and Jacobson, W. and Trada, M. (2008) Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study. Journal of Composite Materials, 42 (19). pp. 2083-2095. ISSN 0021-9983

electrical properties

Ku, H. and Maxwell, A. and Wong, P. and Huang, J. and Fung, H. (2011) Relationship between electrical and mechanical loss tangents of hollow glass powder reinforced epoxy composites: a pilot study. Journal of Applied Polymer Science , 119 (5). pp. 2945-2952. ISSN 0021-8995

Ji, Xiaoyong and Li, Hui and Hui, David and Hsiao, Kuang-Ting and Ou, Jinping and Lau, Alan K. T. (2010) I-V characteristics and electro-mechanical response of different carbon black/epoxy composites. Composites Part B: Engineering, 41 (1). pp. 25-32. ISSN 1359-8368

electrochemical corrosion

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

electrochemical impedance spectroscopy

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

electrochemical performance

Bose, Saswata and Kim, Nam Hoon and Kuila, Tapas and Lau, Kin-tak and Lee, Joong Hee (2011) Electrochemical performance of a graphene–polypyrrole nanocomposite as a supercapacitor electrode. Nanotechnology, 22 (29). p. 5202. ISSN 0957-4484

electromechanical coupling

Liu, Liwi and Liu, Yanju and Leng, Jinsong and Lau, Kin-tak (2011) Electromechanical stability of compressible dielectric elastomer actuators. Smart Materials and Structures, 20 (11). p. 115015. ISSN 0964-1726

electromechanical devices

Liu, Liwi and Liu, Yanju and Leng, Jinsong and Lau, Kin-tak (2011) Electromechanical stability of compressible dielectric elastomer actuators. Smart Materials and Structures, 20 (11). p. 115015. ISSN 0964-1726

electron microscopy

Ku, H. and Yap, Y. S. and Lee, T. S. and Trada, M. (2012) Tensile properties of phenol-formaldehyde nanoclay reinforced composites: a pilot study. Journal of Applied Polymer Science, 126 (s2). E142-E150. ISSN 0021-8995

Ji, Xiaoyong and Li, Hui and Hui, David and Hsiao, Kuang-Ting and Ou, Jinping and Lau, Alan K. T. (2010) I-V characteristics and electro-mechanical response of different carbon black/epoxy composites. Composites Part B: Engineering, 41 (1). pp. 25-32. ISSN 1359-8368

electron transfer

Bose, Saswata and Kim, Nam Hoon and Kuila, Tapas and Lau, Kin-tak and Lee, Joong Hee (2011) Electrochemical performance of a graphene–polypyrrole nanocomposite as a supercapacitor electrode. Nanotechnology, 22 (29). p. 5202. ISSN 0957-4484

elevated temperature

Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275

Eley-Rideal mechanism

Cooney, T. I. and Cardona, F. and Tran-Cong, T. (2011) Kinetics of in situ epoxidation of hemp oil under heterogeneous reaction conditions: an overview with preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27-29 Apr 2011, Brisbane, Australia.

embed

Peauril, J. and Epaarachchi, J. and Lau, K. T. and Wang, H. (2013) Embedded fibre optic sensors under multi-axial loading: a pilot study. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

embedded FBG

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

embedded sensors

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

empirical model

Epaarachchi, J. and Ku, H. and Gohel, K. (2010) A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites. Journal of Composite Materials, 44 (6). pp. 779-788. ISSN 0021-9983

end mills

Ku, Harry S. and Chia, Wee Chong (2006) Design of multi-purpose carbide end mill. Institution of Engineers, Malaysia. Journal, 67 (2). pp. 34-40. ISSN 0126-513X

energy absorption

Thota, Narasimha M. and Epaarachchi, Jayantha A. and Lau, Kin-tak (2013) Effect of the energy absorbing mechanisms on the blunt thoracic trauma caused by a typical foam projectile. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

Malvern, J. L. and Epaarachchi, J. A. and Lau, K. T. (2011) Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions. In: 18th International Conference on Composite Materials (ICCM-18), 21-26 Aug 2011, Jeju Island, South Korea.

Lau, Sindy Mei-Ling and Lau, Kin-Tak and Yin, Yan-Sheng and Li, Lan and Wong, May and Chan, Kevin and Chen, William (2010) A shape memory alloy energy absorber for backpack design. Materials and Manufacturing Processes, 25 (4). pp. 281-286. ISSN 1042-6914

energy absorption behaviour

Guades, Ernesto and Aravinthan, Thiru and Manalo, Allan and Islam, Mainul (2013) Damage modelling of repeatedly impacted square fibre-reinforced polymer composite tube. Materials and Design, 47. pp. 687-697. ISSN 0264-1275

energy efficiency

Aldraho, Abdelnour and Kist, Alexander A. (2010) Heuristics for dynamic topologies to reduce power consumption of networks. In: ATNAC 2010: Australasian Telecommunication Networks and Applications Conference, 31 Oct-3 Nov 2010, Auckland, New Zealand.

engineering

Aravinthan, Thiru and Lokuge, Weena and Manalo, Allan (2011) Effectiveness of formative online quizzes in learning and teaching a structural engineering course. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Aravinthan, Thiru and Manalo, Allan (2011) Student performance in an online postgraduate course on fibre composites for civil engineers. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

engineering design

Khattak, Hamid and Ku, Harry and Goh, Steven (2012) Courses for teaching leadership capacity in professional engineering degrees in Australia and Europe. European Journal of Engineering Education, 37 (3). pp. 279-296. ISSN 0304-3797

engineering education

Ku, Harry S. (2012) Review on using packages to enhance the teaching of critical path networks. In: 2012 International MultiConference of Engineers and Computer Scientists (IMECS 2012), 14-16 Mar 2012, Hong Kong, China.

engineering leadership program

Khattak, Hamid and Ku, Harry and Goh, Steven (2012) Courses for teaching leadership capacity in professional engineering degrees in Australia and Europe. European Journal of Engineering Education, 37 (3). pp. 279-296. ISSN 0304-3797

engineering management science

Ku, H. and Fulcher, R. (2012) Using computer software packages to enhance the teaching in engineering management science: part 2 - programming techniques. Computer Applications in Engineering Education, 20 ( 1). pp. 114-123. ISSN 1099-0542

engineering materials

Aravinthan, Thiru and Karunasena, Warna (Karu) and Wang, Hao, eds. (2009) Futures in mechanics of structures and materials: proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), Toowoomba, Australia, 2-5 December 2008. Taylor & Francis (CRC Press), London, UK. ISBN 978-0-415-49196-9

environment

Thorpe, David and Ryan, Neal and Charles, Michael (2008) Environmental sustainability - a driver for innovation in construction SMEs? In: 3rd International Conference of the CRC for Construction Innovation: Clients Driving Innovation: Benefiting from Innovation, 12-14 March 2008, Gold Coast, Australia.

environmental friendly

Zhuge, Yan (2010) Investigation of the effect of various additives on the strength of environmentally friendly permeable concrete. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

environmental regulation

Yousif, Belal F. and Islam, Md Mainul and Salit, Mohd Sapuan (2013) Sustainable composites [Editorial]. Advances in Materials Science and Engineering. ISSN 1687-8434

envirospheres

Ku, H. and Zhou, Hong and Wong, Peter and Su, Gang and Vadher, Jayent (2012) Modeling the flexural properties of SLG reinforced phenol formaldehyde composites using Langrage’s Method. Advanced Materials Research, 410. pp. 305-308. ISSN 1022-6680

Ku, H. S. (2011) Relationship between different mechanical properties of phenol formaldehyde SLG-reinforced composites. Journal of Reinforced Plastics and Composites, 30 (15). pp. 1281-1292. ISSN 0731-6844

Cardona, F. and Rogers, D. and Gurney, R. and Trada, M. and Ku, H. (2009) Flexural tests of phenol formaldehyde and SLG composites: pilot study. Journal of Reinforced Plastics and Composites, 28 (22). pp. 2761-2769. ISSN 0731-6844

Trada, Mohan and Ku, Harry and Vedhar, Jayant (2009) Flexural strength of phenol formaldehyde composites post-cured in microwaves: preliminary results. In: MFMS 2009: 2nd International Conference on Multi-functional Materials and Structures, 9-12 Oct 2009, Qingdao, China.

Ku, H. and Xiang, W. and Pattarachaiyakoop, N. (2009) Mathematical modeling of the fracture toughness of phenol formaldehyde composites reinforced with E-spheres. In: 2nd International Conference on Multi-functional Materials and Structures, 9-12 Oct 2009, Qingdao, China.

Ku, H. and Cardona, F. and Pattarachaiyakoop, N. and Trada, M. (2009) Fracture toughness of phenol formaldehyde composites reinforced with e-spheres. Journal of Composite Materials, 43 (7). pp. 741-754. ISSN 0021-9983

Ku, H. and Jacobson, W. and Trada, M. and Cardona, F. and Rogers, D. (2008) Tensile tests of phenol formaldehyde SLG reinforced composites: pilot study. Journal of Composite Materials, 42 (26). pp. 2783-2793. ISSN 0021-9983

Ku, Harry and Rogers, David and Davey, Robert and Cardona, Francisco and Trada, Mohan (2008) Fracture toughness of phenol formaldehyde composites: pilot study. Journal of Materials Engineering and Performance, 17 (1). pp. 85-90. ISSN 1059-9495

Cardona, F. and Ku, H. and Pattarachaiyakoop, N. and Rogers, D. and Trada, M. (2007) Fracture toughness of phenol formaldehyde composites post-cured in microwaves. Journal of Electromagnetic Waves and Applications, 21 (14). pp. 2137-2146. ISSN 0920-5071

EPON

Vandenbroucke, A. and Cardona, F. and Ku, H. and Rogers, D. (2009) Effects of chopped hemp on mechanical and thermal properties of epoxy resins. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Ku, H. and Cardona, F. and Rogers, D. and Vandenbroucke, A. (2008) Effects of EPON on mechanical and thermal properties of epoxy resins. In: ICMMSE 2008: International Conference on Multifunctional Materials and Structures, 28-31 Jul 2008, Hong Kong.

epoxidation

Cooney, T. I. and Cardona, F. and Tran-Cong, T. (2011) Kinetics of in situ epoxidation of hemp oil under heterogeneous reaction conditions: an overview with preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27-29 Apr 2011, Brisbane, Australia.

Faigl, Pavel and Rogers, David and Maurin, Romain and Van Erp, Gerard (2007) Plant based resins for fibre composites. In: 4th Annual Composites Australia and Composites CRC Conference (CRC 2007): New Technology Taking Shape, 19-20 Apr 2007, Gold Coast, Australia.

epoxidized hemp oil

Manthey, Nathan William (2013) Development of hemp oil based bioresins for biocomposites. [Thesis (PhD/Research)] (Unpublished)

Manthey, N. W. and Cardona, F. and Aravinthan, T. (2011) Mechanical properties of epoxidized hemp oil based biocomposites: preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27 -29 Apr 2011, Brisbane, Australia.

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2011) Natural fibre composites with QLD based fibres and vegetable oils. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

epoxidized oils

Cardona, Francisco (2012) Bio-resins: new structural renewable materials for bio-composite applications. In: 4th KKU International Engineering Conference: Driving Together Towards ASEAN Economic Community (KKU-IENC 2012) , 10-12 May 2012, Khon Kaen University, Thailand.

epoxidized vegetable oil

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2010) Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

epoxidized vegetable oils

Faigl, Pavel and Rogers, David and Maurin, Romain and Van Erp, Gerard (2007) Plant based resins for fibre composites. In: 4th Annual Composites Australia and Composites CRC Conference (CRC 2007): New Technology Taking Shape, 19-20 Apr 2007, Gold Coast, Australia.

epoxies

Hafizi, Z. M. and Epaarachchi, J. and Nizwan, C. K. E. and Lau, K. T. (2012) Non-velocity based analysis of passive ultrasonic signal for source lLocation detection in composite plates: a pilot study. IOP Conference Series: Materials Science and Engineering, 36 (1). ISSN 1757-8981

epoxy

Lokuge, Weena and Aravinthan, Thiru (2013) Effect of fly ash on the behaviour of polymer concrete with different types of resin. Materials and Design, 51. pp. 175-181. ISSN 0264-1275

Shamsuddoha, M. and Islam, M. M. and Aravinthan, T. and Manalo, A. C. and Lau, K. T. (2013) Mechanical properties of epoxy grouts for structural repair. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Alsaeed, T. and Alajmi, A. and Yousif, B. F. and Ku, H. and Lau, Alan Kin-tak (2012) Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

Guo, Qing Bing and Lau, Kin-Tak and Zheng, Bing Fa and Rong, Min Zhi and Zhang, Ming Qiu (2009) Imparting ultra-low friction and wear rate to epoxy by the incorporation of microencapsulated lubricant? Macromolecular Materials and Engineering, 294 (1). pp. 20-24. ISSN 1438-7492

Li, Xiao-Feng and Lau, Kin-Tak and Yin, Yan-Sheng (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology, 68 (14). pp. 2876-2881. ISSN 0266-3538

Suntharavadivel, T. G. and Aravinthan, T. (2008) Strengthening of shear damaged RC beams with external clamping. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

epoxy composites

Shalwan, A. and Yousif, B. F. (2014) Investigation on interfacial adhesion of date palm/epoxy using fragmentation technique. Materials and Design , 53. pp. 928-937. ISSN 0261-3069

epoxy compounds

Aravinthan, Thiru and Suntharavadivel, T. G. (2007) Effects of existing shear damage on externally post tensioned repair of bent caps. Journal of Structural Engineering, 133 (11). pp. 1662-1669. ISSN 0733-9445

epoxy grout

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan (2014) Effect of coarse filler on shrinkages and dynamic mechanical properties of epoxy grouts. Journal of Multifunctional Composites, 2 (1). pp. 61-66. ISSN 2168-4246

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak (2013) Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines. Materials and Design, 52. pp. 315-327. ISSN 0264-1275

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak (2013) Cure shrinkage in epoxy grouts for grouted repairs. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

epoxy injection

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2007) Analytical studies on externally post tensioned concrete girders with existing shear cracks. In: 23rd Biennial Conference of the Concrete Institute of Australia: Concrete for Future, 18-20 October 2007, Adelaide, Australia.

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2006) Effect of existing cracks in concrete bridge members strengthened by external post-tensioning. In: FIB 2006: 2nd Congress (Federation Internationale du Beton), 5-8 Jun 2006, Naples, Italy.

Aravinthan, Thiru (2006) Is external post-tensioning an effective solution for shear strengthening of bridge elements? In: Structural Faults + Repair 2006: Eleventh International Conference on ‘Extending the Life of Bridges Concrete + Composites Buildings, Masonry + Civil Structures', 13-15 June 2006, Edinburgh, UK.

epoxy resin

Liu, Shan and Yan, Hongqiang and Fang, Zhengping and Guo, Zhenghong and Wang, Hao (2014) Effect of graphene nanosheets and layered double hydroxides on the flame retardancy and thermal degradation of epoxy resin. RSC Advances: an international journal to further the chemical sciences, 4 (36). pp. 18652-18659.

Ku, H. and Trada, Mohan (2013) Tensile properties of nanoclay reinforced epoxy composites. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Ku, H. and Epaarachchi, J. and Trada, M. and Wong, P. (2013) Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves. Journal of Reinforced Plastics and Composites, 32 (10). pp. 689-699. ISSN 0731-6844

Ku, H. and Trada, M. and Tai, P. (2013) Dielectric properties of sawdust reinforced epoxy composites post-cured in microwaves. Journal of Reinforced Plastics and Composites, 32 (10). pp. 765-774. ISSN 0731-6844

Ku, H. and Fung, S. Y. and Islam, M. and Li, X. and Chong, Y. P. (2013) A pilot study on flexural properties of epoxy nanoclay reinforced composites. Journal of Reinforced Plastics and Composites, 32 (2). pp. 96-104. ISSN 0731-6844

Ku, H. and Wong, P. (2012) Contrast on tensile and flexural properties of glass powder reinforced epoxy composites: pilot study. Journal of Applied Polymer Science, 123 (1). pp. 152-161. ISSN 0021-8995

Ku, H. and Donald, M. and Cardona, F. and Trada, M. (2012) Flexural properties of sawdust-reinforced epoxy composites post-cured in microwaves. Journal of Composite Materials, 46 (22). pp. 2879-2890. ISSN 0021-9983

Trada, M. and Mandava, J. and Ku, H. and Yousif, B. (2012) Tensile properties of bagasse reinforced epoxy composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today , 6-8 Nov 2012 , Kuala Lumpur, Malaysia .

Ku, H. and Wong, P. and Huang, J. and Fung, H. and Mohan, T. (2011) Tensile tests of glass powder reinforced epoxy composites: pilot study. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

Ku, H. and Cardona, F. and Rogers, D. and Munoz, J.-C. (2010) Development of polymer network of phenolic and epoxies resins mixed with linseed oil: pilot study. Journal of Materials Engineering and Performance, 19 (6). pp. 912-919. ISSN 1059-9495

Wang, Zhicai and Xu, Cailing and Zhao, Yongqing and Zhao, Dandan and Wang, Zhe and Li, Hulin and Lau, Kin-Tak (2008) Fabrication and mechanical properties of exfoliated clay-CNTs/epoxy nanocomposites. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 490 (1-2). pp. 481-487. ISSN 0921-5093

Ku, H. and Cardona, F. and Rogers, D. and Vandenbroucke, A. (2008) Effects of EPON on mechanical and thermal properties of epoxy resins. In: ICMMSE 2008: International Conference on Multifunctional Materials and Structures, 28-31 Jul 2008, Hong Kong.

Munoz, J.-C. and Ku, H. and Cardona, F. and Rogers, D. (2008) Effects of catalysts and post-curing conditions in the polymer network of epoxy and phenolic resins: preliminary results. Journal of Materials Processing Technology, 202 (1-3). pp. 486-492. ISSN 0924-0136

epoxy resin hollow glass powder

Ku, H. and Wong, P. and Maxwell, A. and Huang, J. and Fung, H. and Mohan, T. (2011) A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

equiaxed structures

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

ergonomic design

Lau, Sindy Mei-Ling and Lau, Kin-Tak and Yin, Yan-Sheng and Li, Lan and Wong, May and Chan, Kevin and Chen, William (2010) A shape memory alloy energy absorber for backpack design. Materials and Manufacturing Processes, 25 (4). pp. 281-286. ISSN 1042-6914

error termination

Thota, N. M. and Epaarachchi, J. A. and Lau, K. T. (2013) Important aspects of finite element modeling of low density thermo plastic closed cell foams. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

ester composites

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

Europe

Khattak, Hamid and Ku, Harry and Goh, Steven (2012) Courses for teaching leadership capacity in professional engineering degrees in Australia and Europe. European Journal of Engineering Education, 37 (3). pp. 279-296. ISSN 0304-3797

EVO

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2010) Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Excel

Ku, H. and Fulcher, R. (2012) Using computer software packages to enhance the teaching in engineering management science: part 2 - programming techniques. Computer Applications in Engineering Education, 20 ( 1). pp. 114-123. ISSN 1099-0542

exfoliation

Wang, Zhicai and Xu, Cailing and Zhao, Yongqing and Zhao, Dandan and Wang, Zhe and Li, Hulin and Lau, Kin-Tak (2008) Fabrication and mechanical properties of exfoliated clay-CNTs/epoxy nanocomposites. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 490 (1-2). pp. 481-487. ISSN 0921-5093

expansion chambers

Choy, Yat-Sze and Lau, Kin-Tak and Wang, C. and Chau, C. W. and Liu, Yang and Hui, David (2009) Composite panels for reducing noise in air conditioning and ventilation systems. Composites Part B: Engineering, 40 (4). pp. 259-266. ISSN 1359-8368

experimental

Islam, Md Mainul and Aravinthan, Thiru and Williams, Paul Garreth (2012) Behaviour of pultruded FRP hollow sections under eccentric loading. In: 6th International Conference on FRP Composites in Civil Engineering (CICE 2012), 13-15 Jun 2012, Rome, Italy.

Guades, E. J. and Sirimanna, C. S. and Aravinthan, T. and Islam, M. M. (2011) Behaviour of fibre composite pile under axial compression load. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Islam, M. M. and Aravinthan, T. (2011) Behaviour of fibre composite sandwich panels under uniformly distributed loading. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Islam, M. M. and Aravinthan, T. and Van Erp, G. (2009) Behaviour of innovative fibre composite sandwich panels under point loading. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009) , 9-11 Dec 2009, Seoul, Korea.

experimental data

Choy, Y. S. and Liu, Y. and Cheung, H. Y. and Xi, Q. and Lau, K. T. (2012) Development of composite plate for compact silencer design. Journal of Sound and Vibration, 331 (10). pp. 2348-2364. ISSN 0022-460X

external clamping

Suntharavadivel, T. G. and Aravinthan, T. (2008) Strengthening of shear damaged RC beams with external clamping. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

external post tensioning

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2007) Analytical studies on externally post tensioned concrete girders with existing shear cracks. In: 23rd Biennial Conference of the Concrete Institute of Australia: Concrete for Future, 18-20 October 2007, Adelaide, Australia.

external post-tensioning

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru and Luther, Stephen (2006) Shear strengthening of cracked RC beam using external post-tensioning. In: 19th Australasian Conference on the Mechanics of Structures and Materials, 29 Nov - 1 Dec 2006, Christchurch, NZ.

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2006) Effect of existing cracks in concrete bridge members strengthened by external post-tensioning. In: FIB 2006: 2nd Congress (Federation Internationale du Beton), 5-8 Jun 2006, Naples, Italy.

Aravinthan, Thiru (2006) Is external post-tensioning an effective solution for shear strengthening of bridge elements? In: Structural Faults + Repair 2006: Eleventh International Conference on ‘Extending the Life of Bridges Concrete + Composites Buildings, Masonry + Civil Structures', 13-15 June 2006, Edinburgh, UK.

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2005) Overview of external post-tensioning in bridges. In: 2005 Southern Region Engineering Conference: Managing Resources for a Sustainable Future (SREC 2005), 15 Oct 2005, Toowoomba, Australia.

external prestressing

Aravinthan, Thiru and Heldt, Tim (2005) Strengthening of bridge headstocks with external post-tensioning: design issues and strengthening techniques. In: Road System and Engineering Technology Forum, 9-11 August 2005, Brisbane, Australia.

external studies

Morgan, Michael J. and Fulcher, Robert and Ku, Harry S. (1999) Innovative residential schools for engineering degree courses. Quarterly Journal of Singapore Institute of Engineering Technologists, 18 (4). pp. 53-58. ISSN 1793-5059

fabric

Misnon, M. I. and Islam, M. M. and Epaarachchi, J. and Lau, K. T. (2013) Textile material forms for reinforcement materials: a review. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

fabricating process

Yan, Z. L. and Wang, H. and Lau, K. T. and Zhang, J. C. and Zhang, H. and Ding, Y. (2012) Fabrication process optimization of hemp fibre reinforced polypropylene composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

fabrication

Ahmed, Mansur and Islam, Md Saiful and Ahsan, Qumrul and Islam, Md Mainul (2011) Fabrication and characterization of unidirectional silk fibre composites. In: ICCST8: 8th International Conference on Composite Science and Technology, 22-24 Mar 2011, Kuala Lumpur, Malaysia.

fabrication and characterizations

Chen, Ling and Tang, Chak Yin and Ku, Harry Siu Lung and Chen, Da Zhu and Tsui, Chi Pong (2013) Surface coating of poly-D-L-lactide/nano-hydroxyapatite composite scaffolds for dexamethasone-releasing function and wettability enhancement. In: Materials Science and Technology Conference (MS&T 2012): Next Generation Biomaterials and Surface Properties of Biomaterials , 27-31 Oct 2012, Pittsburgh, PA. United States.

fabrication technique

Chen, Ling and Tang, Chak Yin and Ku, Harry Siu Lung and Chen, Da Zhu and Tsui, Chi Pong (2013) Surface coating of poly-D-L-lactide/nano-hydroxyapatite composite scaffolds for dexamethasone-releasing function and wettability enhancement. In: Materials Science and Technology Conference (MS&T 2012): Next Generation Biomaterials and Surface Properties of Biomaterials , 27-31 Oct 2012, Pittsburgh, PA. United States.

failure

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2012) Experimental and numerical analysis of an innovative GFRP sandwich floor panel under point load. Engineering Structures, 41. pp. 126-135. ISSN 0141-0296

Islam, Md Mainul and Kim, Ho Sung (2012) Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior. Journal of Sandwich Structures and Materials, 14 (1). pp. 111-127. ISSN 1099-6362

Lian, C. and Zhuge, Y. (2010) Optimum mix design of enhanced permeable concrete: an experimental investigation. Construction and Building Materials, 24 (12). pp. 2664-2671. ISSN 0950-0618

Banerjee, S. and Battley, M. and Bhattacharyya, D. (2010) Shear strength optimization of reinforced honeycomb core materials. Mechanics of Advanced Materials and Structures, 17 (7). pp. 542-552. ISSN 1537-6494

Islam, Md Mainul and Kim, Ho Sung (2010) Manufacturing and behaviour of sandwich composites made of starch as binder for core and adhesive between core and skins. In: 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010), 24-26 Sept 2010, Kottayam, Kerala, India.

failure analysis

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

failure behaviour

Islam, M. M. and Kim, H. S. (2009) An overview on manufacturing and properties of syntactic foams made of ceramic hollow microspheres and starch. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

failure criteria

Banerjee, S. and Bhattacharyya, D. (2011) Optimal design of sandwich panels made of wood veneer hollow cores. Composites Science and Technology, 71 (4). pp. 425-432. ISSN 0266-3538

failure index

Sirimanna, C. S. and Karunasena, W. and Manalo, A. C. and Banerjee, S. and McGarva, L. (2013) Analysis of internal bonded fibre reinforced composite repair systems for corroded steel pipelines. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 Dec 2013, Melbourne, Australia .

failure map

Rao, Sanjeev and Banerjee, Sourish and Jayaraman, Krishnan and Bhattacharyya, Debes (2010) Compressive behavior of fibre reinforced honeycomb cores. In: 2008 IUTAM Symposium on Multi-Functional Material Structures and Systems, 10-12 Dec 2008, Bangalore, India.

failure mechanisms

Ferdous, Wahid and Manalo, Allan (2014) Failures of mainline railway sleepers and suggested remedies – review of current practice. Engineering Failure Analysis, 44. pp. 17-35. ISSN 1350-6307

failure mode map

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

failure modes

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2013) Effect of eccentricity on the behavior of pultruded FRP bolted joint. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

failures

Lokuge, Weena P. and Sanjayan, J. G. and Setunge, Sujeeva (2005) Stress-strain model for laterally confined concrete. Journal of Materials in Civil Engineering, 17 (6). pp. 607-616. ISSN 0899-1561

falling head

Lian, C. and Zhuge, Y. and Beecham, S. (2011) Evaluation of permeability of porous concrete. In: AEMT 2011: International Conference on Advanced Engineering Materials and Technology, 29-31 Jul 2011, Sanya, China.

fatigue

Epaarachchi, J. A. (2011) The effect of viscoelasticity on fatigue behaviour of polymer matrix composites. In: Creep and fatigue in polymer matrix composites. Woodhead Publishing Ltd, Cambridge, United Kingdom, pp. 492-513. ISBN 978 1 84569 656 6; eISBN 978-0-85709-043-0

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2008) Investigation of embedded near infrared fibre Bragg grating (FBG) sensors (830 nm) in structural health monitoring of glass fibre composite structures. In: OFS-19: 19th International Conference on Optical Fibre Sensors , 14-18 April 2008, Perth, Australia.

Epaarachchi, Jayantha A. (2006) Assessment of damage accumulation in glass fibre reinforced plastic (GFRP) composites under spectrum fatigue loading. In: 2006 International Conference on Structural Integrity and Failure (SIF2006), 27-29 Sept 2006, Sydney, Australia.

Epaarachchi, Jayantha A. (2006) A study of estimation of damage accumulation of glass fibre reinforce plastic (GFRP) composites under a block loading situation. Composite Structures, 75 (1-4). pp. 88-92. ISSN 0263-8223

Epaarachchi, Jayantha A. (2006) Effects of static-fatigue (tension) on the tension-tension fatigue life of glass fibre reinforced plastic composites. Composite Structures, 74 (4). pp. 419-425. ISSN 0263-8223

Epaarachchi, Jayantha A. (2005) Effects of static fatigue on the tension-tension fatigue life of glass / polyester composites. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005): Advances in Applied Mechanics, 16-18 Feb 2005, Melbourne, Australia.

Epaarachchi, Jayantha A. and Clausen, Philip D. (2005) A new cumulative fatigue damage model for glass fibre reinforced plastic composites under step/discrete loading. Composites Part A: Applied Science and Manufacturing, 36 (9). pp. 1236-1245. ISSN 1359-835X

Epaarachchi, Jayantha A. and Clausen, Philip D. (2004) Accelerated full scale fatigue testing of a small composite wind turbine blade using a mechanically operated test rig. In: 2004 Structural Integrity and Fracture International Conference (SIF2004), 26-29 Sept 2004, Brisbane, Australia.

Epaarachchi, Jayantha A. and Clausen, Philip D. (2003) An empirical model for fatigue behavior prediction of glass fibre-reinforced plastic (GFRP) composites for various stress ratios and test frequencies. Composites Part A: Applied Science and Manufacturing, 34 (4). pp. 313-326. ISSN 1359-835X

fatigue loadings

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

fatigue properties

Epaarachchi, Jayantha A. and Clegg, Richard (2006) An experimental investigation of the properties of cross-ply laminate used for manufacturing of small aircraft components. Composite Structures, 75 (1-4). pp. 93-99. ISSN 0263-8223

fatigue resistance

Wang, H. and Estrin, Y. and Fu, H. M. and Song, G. L. and Zuberova, Z. (2007) The effect of pre-processing and grain structure on the bio-corrosion and fatigue resistance of magnesium alloy AZ31. Advanced Engineering Materials, 9 (11). pp. 967-972. ISSN 1438-1656

FBG

Peauril, J. and Epaarachchi, J. and Lau, K. T. and Wang, H. (2013) Embedded fibre optic sensors under multi-axial loading: a pilot study. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

FBG sensors

Epaarachchi, Jayantha A. and Rathnaweera, Gayan and Canning, John and Stevenson, Michael (2010) Response Fibre Bragg Grating (FBG) strain sensors embedded at different locations through the thickness around a delamination in a composite lamina. In: 7th Asian-Australasian Conference on Composites (ACCM7), 15-18 Nov 2010, Taipei, Taiwan.

FBG sensor

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

FBG sensors

Kahandawa, Gayan C. and Epaarachchi, Jayantha and Wang, Hao and Canning, John and Lau, K. T. (2013) Extraction and processing of real time strain of embedded FBG sensors using a fixed filter FBG circuit and an artificial neural network. Measurement: Journal of the International Measurement Confederation , 46 (10). pp. 4045-4051. ISSN 0263-2241

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Lau, K. T. (2013) Indexing damage using distortion of embedded FBG sensor response spectra. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. and Followell, D. and Birt, P. (2013) Use of fixed wavelength Fibre-Bragg Grating (FBG) filters to capture time domain data from the distorted spectrum of an embedded FBG sensor to estimate strain with an artificial neural network. Sensors and Actuators A: Physical, 194. pp. 1-7. ISSN 0924-4247

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Lau, K.T. (2013) Prediction of obsolete FBG sensor using ANN for efficient and robust operation of SHM systems. Key Engineering Materials, 558. pp. 546-553. ISSN 1013-9826

Kahandawa, G. C. and Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) Detecting delamination in a composite structure using an embedded FBG – AE hybrid system. In: 7th Australasian Congress on Applied Mechanics (ACAM 7), 9-12 Dec 2012, Adelaide, Australia.

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. and Lau, K. T. (2012) Optimized FBG sensor network for efficient detection of a delamination in FRP structures. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8) :Composites: Enabling Tomorrow’s Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. (2011) Identification of distortions to FBG spectrum using FBG fixed filters. In: ICCM18: Composite Materials: Key to the Future, 21-26 Aug 2011, Jeju, Korea.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Followell, David and Birt, Peter and Canning, John and Stevenson, Michael (2010) An investigation of spectral response of embedded Fibre Bragg Grating (FBG) sensors in a hollow composite cylindrical beam under pure torsion and combined loading. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Australia.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Canning, John (2010) Effects of the self distortions of embedded FBG sensors on spectral response due to torsional and combined loads. In: 3rd Asia-Pacific Workshop on Structural Health Monitoring, 30 Nov-2 Dec 2010, Tokyo, Japan.

Kahandawa, Gayan C. and Epaarachchi, Jayantha A. and Wang, Hao and Aravinthan, Thiru (2010) The developments of structural health/integrity monitoring systems using FBG sensors at CEEFC of USQ. In: 2010 Southern Region Engineering Conference (SREC 2010) , 11-12 Nov 2010, Toowoomba, Australia.

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2008) Investigation of embedded near infrared fibre Bragg grating (FBG) sensors (830 nm) in structural health monitoring of glass fibre composite structures. In: OFS-19: 19th International Conference on Optical Fibre Sensors , 14-18 April 2008, Perth, Australia.

FEA

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2012) Development of smart wind turbine blades. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8) :Composites: Enabling Tomorrow’s Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2012) Design of smart structures for wind turbine blades. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

fiber

Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2007) Tungsten fibre reinforced Zr-based bulk metallic glass composites. Materials and Manufacturing Processes, 22 (5-6). pp. 687-691. ISSN 1042-6914

Fiber Bragg grating (FBG)

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

fiber Bragg grating sensor

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

fiber composites

Manalo, A. C. and Aravinthan, T. and Mutsuyoshi, H. and Matsui, T. (2012) Composite behaviour of a hybrid FRP bridge girder and concrete deck. Advances in Structural Engineering, 15 (4). pp. 589-600. ISSN 1369-4332

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2010) A review of current development in natural fiber composites for structural and infrastructure applications. In: Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

Aravinthan, Thiru, ed. (2008) Fibre composites in civil infrastructure - past, present and future. University of Southern Queensland, Toowoomba, Australia.

fiber reinforced polymer

Shinozaki, H. and Pandey, G. R. and Mutsuyoshi, H. and Aravinthan, T. (2009) AFRP retrofitting of RC structures in Japan. In: ACMSM20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

fiber-optic sensors

Wang, Bo and Teng, J. G. and De Lorenzis, Laura and Zhou, Li-Min and Ou, Jinping and Jin, Wei and Lau, K. T. (2009) Strain monitoring of RC members strengthened with smart NSM FRP bars. Construction and Building Materials, 23 (4). pp. 1698-1711. ISSN 0950-0618

fiber-reinforced polymer (FRP)

Wang, Bo and Teng, J. G. and De Lorenzis, Laura and Zhou, Li-Min and Ou, Jinping and Jin, Wei and Lau, K. T. (2009) Strain monitoring of RC members strengthened with smart NSM FRP bars. Construction and Building Materials, 23 (4). pp. 1698-1711. ISSN 0950-0618

fibers

Ho, Mei-Po and Wang, Hao and Lau, Kin-Tak and Leng, Jinsong (2013) Effect of silk fiber to the mechanical and thermal properties of its biodegradable composites. Journal of Applied Polymer Science , 127 (4). pp. 2389-2396. ISSN 0021-8995

fibre

Misnon, M. I. and Islam, M. M. and Epaarachchi, J. and Lau, K. T. (2013) Textile material forms for reinforcement materials: a review. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak (2013) Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs. Composite Structures, 100. pp. 40-54. ISSN 0263-8223

Kabir, Mohammad Mazedul (2012) Effects of chemical treatments on hemp fibre reinforced polyester composites. [Thesis (PhD/Research)] (Unpublished)

fibre Bragg grating sensors

Kahandawa, Gayan C. and Epaarachchi, Jayantha and Wang, Hao and Lau, K. T. (2012) Use of FBG sensors for SHM in aerospace structures. Photonic Sensors, 2 (3). pp. 203-214. ISSN 1674-9251

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. (2011) Identification of distortions to FBG spectrum using FBG fixed filters. In: ICCM18: Composite Materials: Key to the Future, 21-26 Aug 2011, Jeju, Korea.

fibre composite

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2011) Multi-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applications. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2010) Investigation of frequency characteristics of GFRP/phenolic sandwich beams. In: 2010 Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Douglas, Steven (2010) Fibre composite sandwich beam: an alternative to railway turnout sleeper? In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

fibre composite sandwich panel

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2010) Cost optimum design of structural fibre composite sandwich panel for flooring applications. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

fibre composites

Manalo, A. C. (2013) The effect of shear span-to-depth ratio and test set-up on the behavior of fibre composite sandwich structure. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 Dec 2013, Melbourne, Australia .

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2013) Dynamic behaviour of debonded GFRP composite beams. Journal of Multifunctional Composites, 1 (2). pp. 113-122. ISSN 2168-4246

Manalo, Allan (2013) Fibre reinforced polymer composites sandwich structure: Recent developments and applications in civil infrastructure. In: 2013 International Research Conference on Innovations in Engineering, Science and Technology (IRCIEST 2013), 27-29 Nov 2013, Batangas State University, Batangas, Philippines.

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2013) Shear behaviour of glued structural fibre composite sandwich beams. Construction and Building Materials, 47. pp. 1317-1327. ISSN 0950-0618

Manalo, A. C. (2013) Behaviour of fibre composite sandwich structures under short and asymmetrical beam shear tests. Composite Structures, 99. pp. 339-349. ISSN 0263-8223

Manalo, A. C. and Karunasena, W. and Lau, K. T. (2013) Mechanical properties of bamboo fiber-polyester composites. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2013) Properties and behaviour of gomuti fibre composites under tensile and compressive load. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of full-scale railway turnout sleepers from glue-laminated fibre composite sandwich structures. Journal of Composites for Construction, 16 (6). pp. 724-736. ISSN 1090-0268

Manalo, Allan and Aravinthan, Thiru (2012) Peer assisted learning in an online postgraduate course on engineered fibre composites. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

Manalo, A. C. (2012) Recent developments on fibre composite sandwich structures in civil infrastructure. In: 6th International Composites Conference (ACUN 6): Composite and Nanocomposites in Civil, Offshore and Mining Infrastructure, 14-16 Nov 2012, Melbourne, Australia.

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2012) Experimental and numerical analysis of an innovative GFRP sandwich floor panel under point load. Engineering Structures, 41. pp. 126-135. ISSN 0141-0296

Aravinthan, Thiru and Manalo, Allan (2012) Field applications and case studies of FRP in civil infrastructure: the Australian experience. In: 6th International Conference on FRP Composites in Civil Engineering (CICE 2012) , 13-15 Jun 2012, Rome, Italy.

Manalo, Allan C. and Aravinthan, Thiru (2012) Mechanical behaviour of a new type of fibre composite railway sleeper. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Karu (2012) Prediction of the flexural behavior of fibre composite sandwich beams. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Aravinthan, Thiru (2012) Research and development of fibre composites in civil infrastructure - the Australian experience [Keynote address]. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Manalo, Allan and Mutsuyoshi, Hiroshi (2012) Behavior of fiber-reinforced composite beams with mechanical joints. Journal of Composite Materials, 46 (4). pp. 483-496. ISSN 0021-9983

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Stevens, Nick (2012) Analysis of a typical railway turnout sleeper system using grillage beam analogy. Finite Elements in Analysis and Design, 48 (1). 1376-1391 . ISSN 0168-874X

Aravinthan, Thiru and Manalo, Allan (2011) Student performance in an online postgraduate course on fibre composites for civil engineers. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

Manalo, A. C. and Aravinthan, T. (2011) The effects of fibre wraps on the flexural behaviour of glulam composite sandwich beams. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011), 27-29 Apr 2011, Brisbane, Australia.

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2011) A comparison of the shear behaviour of a fibre composite sandwich structure in the transverse and in-plane directions. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials , 7-10 Dec 2010, Melbourne, Australia.

Islam, Md Mainul and Aravinthan, Thiru (2010) Behaviour of structural fibre composite sandwich panels under point load and uniformly distributed load. Composite Structures, 93 (1). pp. 206-215. ISSN 0263-8223

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Warna (2010) Evaluation of the strength and stiffness of glue-laminated fibre composite sandwich panels for structural beam application. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Western Australia.

Aravinthan, T. and Heldt, T. (2010) Innovative strengthening technique using post-tensioned fibre composite wraps for bridge headstocks. Australian Journal of Structural Engineering, 11 (2). pp. 117-128. ISSN 1328-7982

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) Flexural behaviour of glue-laminated fibre composite sandwich beams. Composite Structures, 92 (11). pp. 2703-2711. ISSN 0263-8223

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) In-plane shear behaviour of fibre composite sandwich beams using asymmetrical beam shear test. Construction and Building Materials, 24 (10). pp. 1952-1960. ISSN 0950-0618

Aravinthan, Thiru (2010) Challenges in the design and delivery of an online postgraduate course in fibre composites. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Warna (2010) Shear behavior of glue-laminated composite sandwich beams. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna (2010) Behaviour of structural glulam beams from sustainable fibre composite sandwich panels. In: 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference (CECAR5 and ASEC2010): Innovative Community Building, 8-12 Aug 2010, Sydney, Australia.

Aravinthan, Thiru and Manalo, Allan and Douglas, Steve (2010) Development of a fibre composite turnout sleeper. In: 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference (CECAR5 and ASEC2010): Innovative Community Building, 8-12 Aug 2010, Sydney, Australia.

Awad, Ziad K. and Gonzalez, Felipe and Aravinthan, Thiru (2010) Advanced robust design optimization of FRP sandwich floor panels. IOP Conference Series: Materials Science and Engineering, 10 (1). 012182,1-012182,9. ISSN 1757-899X

Manalo, A. C. and Aravinthan, T. and Karunasena, W. and Islam, M. M. (2010) Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions. Composite Structures, 92 (4). 984-995 . ISSN 0263-8223

Manalo, A. and Aravinthan, T. and Karunasena, W. and Ticoalu, A. (2010) A review of alternative materials for replacing existing timber sleepers. Composite Structures, 92 (3). pp. 603-611. ISSN 0263-8223

Omar, T. and Aravinthan, T. (2009) Design and development of a fibre composite windmill structure. Australian Journal of Structural Engineering, 10 (1). pp. 25-36. ISSN 1328-7982

Omar, T. and Aravinthan, T. (2009) Fibre composite wind mill structure - investigations and design considerations. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

Aravinthan, Thiru, ed. (2008) Fibre composites in civil infrastructure - past, present and future. University of Southern Queensland, Toowoomba, Australia.

Aravinthan, Thiru and Omar, Tarek (2008) Fibre composite windmill structure - challenges in the design and development. In: CICE 2008: 4th International Conference on FRP Composites in Civil Engineering, 22-24 Jul 2008, Zurich, Switzerland.

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2007) Innovative all composite multi-pultrusion truss system for stressed arch deployable shelters. In: AICSGE 6: 6th Alexandria International Conference on Structural and Geotechnical Engineering, 15-17 Apr 2007, Alexandria, Egypt.

fibre constituents

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. (2013) Effects of chemical treatments on hemp fibre structure. Applied Surface Science , 276. pp. 13-23. ISSN 0169-4332

fibre diameter

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. (2013) Tensile properties of chemically treated hemp fibres as reinforcement for composites. Composites Part B: Engineering , 53. pp. 362-368. ISSN 1359-8368

fibre lengths

Cheung, Hoi-Yan and Lau, Kin-tak and Tao, Xiao-Ming and Hui, David (2008) A potential material for tissue engineering: silkworm silk/PLA biocomposite. Composites Part B: Engineering, 39 (6). pp. 1026-1033. ISSN 1359-8368

fibre model analysis

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Karu (2012) Prediction of the flexural behavior of fibre composite sandwich beams. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

fibre optic sensors

Wang, Bo and Teng, J. G. and De Lorenzis, Laura and Zhou, Li-Min and Ou, Jinping and Jin, Wei and Lau, K. T. (2009) Strain monitoring of RC members strengthened with smart NSM FRP bars. Construction and Building Materials, 23 (4). pp. 1698-1711. ISSN 0950-0618

fibre orientation

Islam, Md Mainul and Aravinthan, Thiru (2010) Behaviour of structural fibre composite sandwich panels under point load and uniformly distributed load. Composite Structures, 93 (1). pp. 206-215. ISSN 0263-8223

fibre properties

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2014) A study into the characteristics of gomuti (Arenga pinnata) fibre for usage as natural fibre composites. Journal of Reinforced Plastics and Composites, 33 (2). pp. 179-192. ISSN 0731-6844

fibre reinforced

Ho, Mei-po and Wang, Hao and Ho, Chun-kit and Lau, Kin-tak (2012) A study on the dynamic mechanical properties of silk fibre composites. Advanced Materials Research, 410. pp. 106-109. ISSN 1022-6680

fibre reinforced plastic (FRP)

Aravinthan, Thiru and Heldt, Tim (2005) Strengthening of bridge headstocks with external post-tensioning: design issues and strengthening techniques. In: Road System and Engineering Technology Forum, 9-11 August 2005, Brisbane, Australia.

fibre reinforced plastics

Wang, Bo and Teng, J. G. and De Lorenzis, Laura and Zhou, Li-Min and Ou, Jinping and Jin, Wei and Lau, K. T. (2009) Strain monitoring of RC members strengthened with smart NSM FRP bars. Construction and Building Materials, 23 (4). pp. 1698-1711. ISSN 0950-0618

fibre reinforced polymer

Karunasena, Warna (Karu) and Martin, Nicole (2007) The effect of debonding on the flexural behaviour of reinforced concrete beams strengthened with fibre reinforced polymer. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

fibre reinforced polymer (FRP)

Tawfik, Qaidar and Karunasena, Warna (Karu) (2010) Use of CFRP for rehabilitation of steel structures: a review. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

fibre reinforced polymer composites

Manalo, A. C. and Mutsuyoshi, H. and Asamoto, S. and Aravinthan, T. and Matsui, T. (2009) Mechanical behavior of hybrid FRP composites with bolted joints. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

fibre reinforced polymers

Guades, E. J. and Aravinthan, T. and Islam, M. M. (2011) Driveability of composite piles. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011) , 27-29 Apr 2011, Brisbane, Australia.

Guades, Ernesto Jusayan and Aravinthan, Thiru and Islam, Md Mainul (2010) An overview on the application of FRP composites in piling system. In: 2010 Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Queensland, Australia.

fibre reinforced thermoplastic composites (FRTP)

Ku, Harry S. and Ball, James A. R. and Siores, Elias and Horsfield, Brendan (1999) Microwave processing and permittivity measurement of thermoplastic composites at elevated temperature. Journal of Materials Processing Technology, 89-90. pp. 419-424. ISSN 0924-0136

fibre wraps

Manalo, A. C. and Aravinthan, T. (2011) The effects of fibre wraps on the flexural behaviour of glulam composite sandwich beams. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011), 27-29 Apr 2011, Brisbane, Australia.

Aravinthan, T. and Heldt, T. (2010) Innovative strengthening technique using post-tensioned fibre composite wraps for bridge headstocks. Australian Journal of Structural Engineering, 11 (2). pp. 117-128. ISSN 1328-7982

fibre-glass

Ismail, S. B. and Salleh, Z. and Yusop, M. Y.M. and Fakhruradzi, F. H. (2013) Monitoring of barnacle growth on the underwater hull of an FRP boat using image processing. In: 4th International Conference on Computational Systems-Biology and Bioinformatics, CSBio 2013, 7-9 Nov 2013, Seoul; South Korea.

fibre-matrix compatibility

Kabir, Mohammad Mazedul (2012) Effects of chemical treatments on hemp fibre reinforced polyester composites. [Thesis (PhD/Research)] (Unpublished)

fibre/matrix bond

Etaati, Amir and Pather, Selvan and Fang, Zhengping and Wang, Hao (2014) The study of fibre/matrix bond strength in short hemp polypropylene composites from dynamic mechanical analysis. Composites Part B: Engineering, 62 (2014). pp. 19-28. ISSN 1359-8368

Etaati, A. and Wang, H. and Pather, S. and Yan, Z. and Mehdizadeh, S. Abdanan (2013) 3D X-ray microtomography study on fibre breakage in noil hemp fibre reinforced polypropylene composites. Composites Part B: Engineering, 50. pp. 239-246. ISSN 1359-8368

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. (2012) Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview. Composites Part B: Engineering, 43 (7). pp. 2883-2892. ISSN 1359-8368

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. and Aravinthan, T. (2012) Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites. Composites Part B: Engineering, 43 (2). pp. 159-169. ISSN 1359-8368

Kim, M. T. and Rhee, K. Y. and Lee, J. H. and Hui, D. and Lau, Alan K. T. (2011) Property enhancement of a carbon fiber/epoxy composite by using carbon nanotubes. Composites Part B: Engineering , 42 (5). pp. 1257-1261. ISSN 1359-8368

fibreglass

Ho, Mei-po and Lau, Kin-tak (2012) Design of an impact resistant glass fibre/epoxy composites using short silk fibres. Materials and Design, 35 (1). pp. 664-669. ISSN 0261-3069

fibres

Lokuge, Weena and Karunasena, W. and Heemskerk, Colin (2013) Effect of strain rate on geopolymer concrete. In: Concrete 2013: Understanding Concrete, 16-18 Oct 2013, Gold Coast, Australia.

Si, Xiaojuan and Guo, Linfeng and Wang, Yimin and Lau, Kin-Tak (2008) Preparation and study of polypropylene/polyethylene terephthalate composite fibres. Composites Science and Technology, 68 (14). pp. 2943-2947. ISSN 0266-3538

field application

Aravinthan, Thiru and Manalo, Allan (2012) Field applications and case studies of FRP in civil infrastructure: the Australian experience. In: 6th International Conference on FRP Composites in Civil Engineering (CICE 2012) , 13-15 Jun 2012, Rome, Italy.

field emission scanning electron microscopy

Park, Ok-kyung and Kim, Nam Hoon and Lau, Kin-Tak and Lee, Joong Hee (2010) Effect of surface treatment with potassium persulfate on dispersion stability of multi-walled carbon nanotubes. Materials Letters, 64 (6). pp. 718-721. ISSN 0167-577X

field experiment

Zhang, Zuhua and Yao, Xiao and Wang, Hao (2012) Potential application of geopolymers as protection coatings for marine concrete III. Field experiment. Applied Clay Science, 67-68. pp. 57-60. ISSN 0169-1317

field-emission transmission electron microscopies

Park, Ok-kyung and Kim, Nam Hoon and Lau, Kin-Tak and Lee, Joong Hee (2010) Effect of surface treatment with potassium persulfate on dispersion stability of multi-walled carbon nanotubes. Materials Letters, 64 (6). pp. 718-721. ISSN 0167-577X

filler

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2011) Preliminary development of polymer based filler materials for GFRP tubular connector. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

filler addition

Trada, Mohan and Ku, Harry and Vedhar, Jayant (2009) Flexural strength of phenol formaldehyde composites post-cured in microwaves: preliminary results. In: MFMS 2009: 2nd International Conference on Multi-functional Materials and Structures, 9-12 Oct 2009, Qingdao, China.

fillers

Sirimanna, Chamila Sampath and Islam, Md Mainul and Aravinthan, Thiru (2011) Polymer based filler materials as infill for GFRP pile connector. In: ICCST8: 8th International Conference on Composite Science and Technology, 22-24 Mar 2011, Kuala Lumpur, Malaysia.

finish temperature

Lau, Sindy Mei-Ling and Lau, Kin-Tak and Yin, Yan-Sheng and Li, Lan and Wong, May and Chan, Kevin and Chen, William (2010) A shape memory alloy energy absorber for backpack design. Materials and Manufacturing Processes, 25 (4). pp. 281-286. ISSN 1042-6914

finite element

Awad, Ziad K. and Yusaf, Talal F. (2011) Finite element analysis of fibre reinforce concrete beam subject to high temperature by using EURO-code models. In: ICCST8: 8th International Conference on Composite Science and Technology, 22-24 Mar 2011, Kuala Lumpur, Malaysia.

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2010) Investigation of frequency characteristics of GFRP/phenolic sandwich beams. In: 2010 Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2010) Cost optimum design of structural fibre composite sandwich panel for flooring applications. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

Awad, Ziad K. and Gonzalez, Felipe and Aravinthan, Thiru (2010) Advanced robust design optimization of FRP sandwich floor panels. IOP Conference Series: Materials Science and Engineering, 10 (1). 012182,1-012182,9. ISSN 1757-899X

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2009) Finite element analysis of fibre composite sandwich panel. In: Southern Engineering Conference, 17-18 Oct 2009, Springfield, Queensland, Australia.

finite element analysis

Kahandawa, G. C. and Epaarachchi, J. A. and Wang, H. and Lau, K. T. (2012) Optimized FBG sensor network for efficient detection of a delamination in FRP structures. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 2012): Composites: Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

finite element method

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2012) Investigation of the free vibration behaviour of an innovative GFRP sandwich floor panel. Construction and Building Materials, 37. pp. 209-219. ISSN 0950-0618

finite element modeling

Karunasena, W. and Jayatilake, I. and Lokuge, W. (2013) Free vibration behaviour of fibre composite sandwich beams with debonds. In: 4th International Conference on Structural Engineering and Construction Management 2013 (ICSECM 2013), 13-15 Dec 2013, Kandy, Sri Lanka.

finite element modelling

Zhuge, Yan and Mills, Julie E. and Ma, Xing (2012) Modelling of steel lattice tower angle legs reinforced for increased load capacity. Engineering Structures, 43. pp. 160-168. ISSN 0141-0296

Karunasena, W. and Summerville, C. J. (2011) Structural performance of low grade timber slabs. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Omar, T. and Aravinthan, T. (2009) Design and development of a fibre composite windmill structure. Australian Journal of Structural Engineering, 10 (1). pp. 25-36. ISSN 1328-7982

finite elements

Karunasena, W. (2008) Elastodynamic reciprocity relations for wave scattering by flaws in fiber-reinforced composite plates. Journal of Mechanics of Materials and Structures, 3 (10). pp. 1831-1846. ISSN 1559-3959

finite-discrete element method

Wei, Riyu and Zhang, Sheng and Karunasena, Warna and Sivakugan, Nagaratnam and Zhang, Hongwu (2007) Blast simulation in underground mines using the combined finite-discrete element method. In: 7th WSEAS International Conference on Simulation, Modelling and Optimization (SMO '07), 15-17 September 2007, Beijing, China.

fire

Awad, Ziad K. and Yusaf, Talal F. (2011) Finite element analysis of fibre reinforce concrete beam subject to high temperature by using EURO-code models. In: ICCST8: 8th International Conference on Composite Science and Technology, 22-24 Mar 2011, Kuala Lumpur, Malaysia.

fire resistance

Zhang, Zuhua and Yang, Tao and Wang, Hao and Yao, Xiao (2013) Inorganic polymer foams: transform from non-structural to structural upon fire. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Fisher-Snedocor test

Dohnal, Ludek and Faigl, Paul (2007) Evaluation of the linearity of calibration dependence. In: Quality assurance of analytical results, 26-28 Mar 2007, (Beskydy), Czech Republic. (Unpublished)

fixed frequency microwaves

Ku, Harry S. (2012) Processing of materials using electromagnetic fields. In: Wiley encyclopedia of composites, 2nd ed. John Wiley & Sons, Inc., Hoboken, NJ. United States, pp. 2487-2500. ISBN 978-0-470-12828-2

Ku, Harry S. and Yusaf, Talal (2008) Processing of composites using variable and fixed frequency microwave facilities. Progress in Electromagnetic Research B, PIERB . pp. 185-205. ISSN 1937-6472

Ku, Harry S. (2006) Productivity improvement of composites processing through the use of industrial microwave technologies. Progress in Electromagnetics Research (PIER), PIER 6. pp. 267-285. ISSN 1559-8985

fixity

Islam, M. M. and Aravinthan, T. (2011) Behaviour of fibre composite sandwich panels under uniformly distributed loading. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Islam, Md Mainul and Aravinthan, Thiru (2010) Behaviour of structural fibre composite sandwich panels under point load and uniformly distributed load. Composite Structures, 93 (1). pp. 206-215. ISSN 0263-8223

flame retardation

Liu, Shan and Yan, Hongqiang and Fang, Zhengping and Guo, Zhenghong and Wang, Hao (2014) Effect of graphene nanosheets and layered double hydroxides on the flame retardancy and thermal degradation of epoxy resin. RSC Advances: an international journal to further the chemical sciences, 4 (36). pp. 18652-18659.

flatwise

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2013) Shear behaviour of glued structural fibre composite sandwich beams. Construction and Building Materials, 47. pp. 1317-1327. ISSN 0950-0618

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of full-scale railway turnout sleepers from glue-laminated fibre composite sandwich structures. Journal of Composites for Construction, 16 (6). pp. 724-736. ISSN 1090-0268

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) Flexural behaviour of glue-laminated fibre composite sandwich beams. Composite Structures, 92 (11). pp. 2703-2711. ISSN 0263-8223

Manalo, A. C. and Aravinthan, T. and Karunasena, W. and Islam, M. M. (2010) Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions. Composite Structures, 92 (4). 984-995 . ISSN 0263-8223

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2009) Flexural behaviour of laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Islam, Mainul (2009) Flexural behaviour of composite sandwiches for structural applications. In: FRPRCS-9: Current Challenges and Future Trends, 13-15 Jul 2009, Sydney, Australia.

flexibility

Cardona, F. and Aravinthan, T. and Moscou, C. (2010) Modified PF resins for composite structures with improved mechanical properties. Polymers and Polymer Composites, 18 (6). pp. 297-306. ISSN 0967-3911

flexible delivery

Morgan, M. J. and Fulcher, R. L. and Ku, H. S. (1998) Articulation, credit transfer and flexible delivery of engineering degree courses: Australia, Malaysia and Hong Kong. Jurutera: Institution of Engineers Malaysia Monthly Bulletin, 1998 (1). pp. 57-67. ISSN 0126-513X

flexural behavior

Asamoto, S. and Mutsuyoshi, H. and Aravinthan, T. and Suzukawa, K. (2008) Experimental investigation of innovative hybrid composite girders with GFRP and CFRP. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

flexural behaviour

Asamoto, S. and Mutsuyoshi, H. and Aravinthan, T. and Suzukawa, K. (2008) Experimental investigation of innovative hybrid composite girders with GFRP and CFRP. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

Karunasena, Warna (Karu) and Martin, Nicole (2007) The effect of debonding on the flexural behaviour of reinforced concrete beams strengthened with fibre reinforced polymer. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

flexural failure

Islam, M. M. and Kim, H. S. (2009) An overview on manufacturing and properties of syntactic foams made of ceramic hollow microspheres and starch. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

flexural modulus

Ku, H. and Fung, S. Y. and Islam, M. and Li, X. and Chong, Y. P. (2013) A pilot study on flexural properties of epoxy nanoclay reinforced composites. Journal of Reinforced Plastics and Composites, 32 (2). pp. 96-104. ISSN 0731-6844

Ku, H. and Wong, P. (2012) Contrast on tensile and flexural properties of glass powder reinforced epoxy composites: pilot study. Journal of Applied Polymer Science, 123 (1). pp. 152-161. ISSN 0021-8995

Ku, H. and Donald, M. and Cardona, F. and Trada, M. (2012) Flexural properties of sawdust-reinforced epoxy composites post-cured in microwaves. Journal of Composite Materials, 46 (22). pp. 2879-2890. ISSN 0021-9983

Ho, Mei-po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

Cardona, Francisco and Aravinthan, Thiru and Fedrigo, Jessica and Moscou, Clarisse (2010) Synthesis of phenolic bio-resins for advanced composites in civil engineering structures. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Ku, H. and Trada, M. and Huq, R. (2010) A pilot study on the flexural properties of vinyl ester composites filled with glass powder. In: MFMS 2010: 3rd International Conference on Multi-Functional Materials and Structures, 14-18 Sep 2010, Jeonju, South Korea.

Ku, H. and Trada, M. and Nixon, R. and Wong, P. (2010) Flexural properties of phenolic resin reinforced with glass powder: preliminary results. Journal of Applied Polymer Science, 116 (1). pp. 347-354. ISSN 0021-8995

Ku, Harry S. and Trada, Mohan and Zong, Xuejin and Wong, Peter (2009) Flexural properties of phenolic resin reinforced with glass powder. In: ICAST 2009: 20th International Conference on Adaptive Structures and Technologies , 20-22 Oct 2009, Shatin, Hong Kong.

Ku, H. and Cardona, F. and Rogers, D. and Vandenbroucke, A. (2008) Effects of EPON on mechanical and thermal properties of epoxy resins. In: ICMMSE 2008: International Conference on Multifunctional Materials and Structures, 28-31 Jul 2008, Hong Kong.

Munoz, J.-C. and Ku, H. and Cardona, F. and Rogers, D. (2008) Effects of catalysts and post-curing conditions in the polymer network of epoxy and phenolic resins: preliminary results. Journal of Materials Processing Technology, 202 (1-3). pp. 486-492. ISSN 0924-0136

flexural stiffness

Mutsuyoshi, Hiroshi and Hai, Nguyen Duc and Shiroki, Kensuke and Aravinthan, Thiru and Manalo, Allan (2011) Experimental investigation of HFRP composite beams. In: FRPRCS-10: 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures , 2-4 Apr 2011, Tampa, FL. United States.

flexural strain

Ku, H. and Donald, M. and Cardona, F. and Trada, M. (2012) Flexural properties of sawdust-reinforced epoxy composites post-cured in microwaves. Journal of Composite Materials, 46 (22). pp. 2879-2890. ISSN 0021-9983

Ku, H. and Trada, M. and Huq, R. (2010) A pilot study on the flexural properties of vinyl ester composites filled with glass powder. In: MFMS 2010: 3rd International Conference on Multi-Functional Materials and Structures, 14-18 Sep 2010, Jeonju, South Korea.

Ku, H. and Trada, M. and Nixon, R. and Wong, P. (2010) Flexural properties of phenolic resin reinforced with glass powder: preliminary results. Journal of Applied Polymer Science, 116 (1). pp. 347-354. ISSN 0021-8995

Cardona, F. and Rogers, D. and Gurney, R. and Trada, M. and Ku, H. (2009) Flexural tests of phenol formaldehyde and SLG composites: pilot study. Journal of Reinforced Plastics and Composites, 28 (22). pp. 2761-2769. ISSN 0731-6844

Ku, Harry S. and Trada, Mohan and Zong, Xuejin and Wong, Peter (2009) Flexural properties of phenolic resin reinforced with glass powder. In: ICAST 2009: 20th International Conference on Adaptive Structures and Technologies , 20-22 Oct 2009, Shatin, Hong Kong.

flexural strength

Ku, H. and Fung, S. Y. and Islam, M. and Li, X. and Chong, Y. P. (2013) A pilot study on flexural properties of epoxy nanoclay reinforced composites. Journal of Reinforced Plastics and Composites, 32 (2). pp. 96-104. ISSN 0731-6844

Ku, H. and Wong, P. (2012) Contrast on tensile and flexural properties of glass powder reinforced epoxy composites: pilot study. Journal of Applied Polymer Science, 123 (1). pp. 152-161. ISSN 0021-8995

Ku, H. and Wong, P. and Huang, J. and Fung, H. and Trada, M. (2012) Flexural properties of epoxy composites filled with glass powder: preliminary results. Advanced Material Research, 410. pp. 309-312. ISSN 1022-6680

Ku, H. and Donald, M. and Cardona, F. and Trada, M. (2012) Flexural properties of sawdust-reinforced epoxy composites post-cured in microwaves. Journal of Composite Materials, 46 (22). pp. 2879-2890. ISSN 0021-9983

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2011) Flexural strength of sandwich panel with lignocellulosic composites intermediate layer – a statistic approach. International Journal of Protective Structures, 2 (4). pp. 453-464. ISSN 2041-4196

Ku, H. S. (2011) Relationship between different mechanical properties of phenol formaldehyde SLG-reinforced composites. Journal of Reinforced Plastics and Composites, 30 (15). pp. 1281-1292. ISSN 0731-6844

Ho, Mei-po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

Cardona, F. and Ku, H. and Chouzenoux, L. (2010) Effect of tannin on flexural properties of phenol formaldehyde glycerol reinforced composites: preliminary results. Journal of Reinforced Plastics and Composites, 29 (24). pp. 3543-3553. ISSN 0731-6844

Ku, H. and Trada, M. and Huq, R. (2010) A pilot study on the flexural properties of vinyl ester composites filled with glass powder. In: MFMS 2010: 3rd International Conference on Multi-Functional Materials and Structures, 14-18 Sep 2010, Jeonju, South Korea.

Ku, H. and Trada, M. and Nixon, R. and Wong, P. (2010) Flexural properties of phenolic resin reinforced with glass powder: preliminary results. Journal of Applied Polymer Science, 116 (1). pp. 347-354. ISSN 0021-8995

Cardona, F. and Rogers, D. and Gurney, R. and Trada, M. and Ku, H. (2009) Flexural tests of phenol formaldehyde and SLG composites: pilot study. Journal of Reinforced Plastics and Composites, 28 (22). pp. 2761-2769. ISSN 0731-6844

Ku, Harry S. and Trada, Mohan and Zong, Xuejin and Wong, Peter (2009) Flexural properties of phenolic resin reinforced with glass powder. In: ICAST 2009: 20th International Conference on Adaptive Structures and Technologies , 20-22 Oct 2009, Shatin, Hong Kong.

Trada, Mohan and Ku, Harry and Vedhar, Jayant (2009) Flexural strength of phenol formaldehyde composites post-cured in microwaves: preliminary results. In: MFMS 2009: 2nd International Conference on Multi-functional Materials and Structures, 9-12 Oct 2009, Qingdao, China.

Ku, H. S. and Fok, S. C. and Siores, E. (2009) Contrasts on fracture toughness and flexural strength of varying percentages of SLG-reinforced phenolic composites. Journal of Composite Materials, 43 (8). pp. 885-895. ISSN 0021-9983

flexural strengthening

Wang, Bo and Teng, J. G. and De Lorenzis, Laura and Zhou, Li-Min and Ou, Jinping and Jin, Wei and Lau, K. T. (2009) Strain monitoring of RC members strengthened with smart NSM FRP bars. Construction and Building Materials, 23 (4). pp. 1698-1711. ISSN 0950-0618

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2006) Effect of existing cracks in concrete bridge members strengthened by external post-tensioning. In: FIB 2006: 2nd Congress (Federation Internationale du Beton), 5-8 Jun 2006, Naples, Italy.

Aravinthan, Thiru (2006) Is external post-tensioning an effective solution for shear strengthening of bridge elements? In: Structural Faults + Repair 2006: Eleventh International Conference on ‘Extending the Life of Bridges Concrete + Composites Buildings, Masonry + Civil Structures', 13-15 June 2006, Edinburgh, UK.

flexural test

Ku, H. and Cardona, F. and Rogers, D. and Munoz, J.-C. (2010) Development of polymer network of phenolic and epoxies resins mixed with linseed oil: pilot study. Journal of Materials Engineering and Performance, 19 (6). pp. 912-919. ISSN 1059-9495

flexural tests

Kabir, M. M. and Wang, H. and Cardona, F. and Aravinthan, T. (2011) Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Vandenbroucke, A. and Cardona, F. and Ku, H. and Rogers, D. (2009) Effects of chopped hemp on mechanical and thermal properties of epoxy resins. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Cardona, F. and Moscou, C. (2009) Synthesis and characterization of modified phenolic resins for composites with enhanced mechanical properties. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

flexure

Maranan, G. B. and Manalo, A. C. (2013) Investigation on the mechanical behavior of hybrid fibre reinforced polymer composite beam. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 December 2013, Melbourne, Australia.

Manalo, Allan C. and Aravinthan, Thiru (2012) Mechanical behaviour of a new type of fibre composite railway sleeper. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Karu (2012) Prediction of the flexural behavior of fibre composite sandwich beams. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

Manalo, Allan C. and Aravinthan, Thiru (2011) Flexural behaviour of glulam beams from novel sandwich panels. In: 16th International Conference on Composite Structures (ICCS 16), 28-30 July 2011, Porto, Portugal.

Manalo, A. C. and Aravinthan, T. (2011) The effects of fibre wraps on the flexural behaviour of glulam composite sandwich beams. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011), 27-29 Apr 2011, Brisbane, Australia.

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Warna (2010) Evaluation of the strength and stiffness of glue-laminated fibre composite sandwich panels for structural beam application. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Western Australia.

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) Flexural behaviour of glue-laminated fibre composite sandwich beams. Composite Structures, 92 (11). pp. 2703-2711. ISSN 0263-8223

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna (2010) Behaviour of structural glulam beams from sustainable fibre composite sandwich panels. In: 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference (CECAR5 and ASEC2010): Innovative Community Building, 8-12 Aug 2010, Sydney, Australia.

Manalo, A. C. and Aravinthan, T. and Karunasena, W. and Islam, M. M. (2010) Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions. Composite Structures, 92 (4). 984-995 . ISSN 0263-8223

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Islam, Mainul (2009) Flexural behaviour of composite sandwiches for structural applications. In: FRPRCS-9: Current Challenges and Future Trends, 13-15 Jul 2009, Sydney, Australia.

floor

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2010) Cost optimum design of structural fibre composite sandwich panel for flooring applications. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

floor panel

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2012) Investigation of the free vibration behaviour of an innovative GFRP sandwich floor panel. Construction and Building Materials, 37. pp. 209-219. ISSN 0950-0618

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2012) Experimental and numerical analysis of an innovative GFRP sandwich floor panel under point load. Engineering Structures, 41. pp. 126-135. ISSN 0141-0296

floor slabs

Karunasena, W. and Summerville, C. J. (2011) Structural performance of low grade timber slabs. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

flooring system

Islam, M. M. and Aravinthan, T. and Van Erp, G. (2009) Behaviour of innovative fibre composite sandwich panels under point loading. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009) , 9-11 Dec 2009, Seoul, Korea.

flowthrough

Choy, Y. S. and Liu, Y. and Cheung, H. Y. and Xi, Q. and Lau, K. T. (2012) Development of composite plate for compact silencer design. Journal of Sound and Vibration, 331 (10). pp. 2348-2364. ISSN 0022-460X

Choy, Y. S. and Liu, Y. and Lau, K. T. (2012) Duct noise control by using very light composite plate. Advanced Materials Research, 410. pp. 361-365. ISSN 1022-6680

fluids

Zhuge, Yan (2013) The performance of recycled and quarry aggregates and their effect on permeable concrete. In: Concrete 2013: Understanding Concrete, 16-18 Oct 2013, Gold Coast, Australia.

Fly ash

Chen, Si and Zhuge, Yan and Xu, Deping (2013) Influencing factors and new developments of fly ash based geopolymer. Advanced Materials Research, 831(2014). pp. 62-64. ISSN 1022-6680

Lokuge, Weena and Aravinthan, Thiru (2013) Comparative assessment of polymer concrete with different types of resin. In: Concrete 2013: Understanding Concrete , 16-18 Oct 2013, Gold Coast, Australia.

Lokuge, Weena and Aravinthan, Thiru (2013) Effect of fly ash on the behaviour of polymer concrete with different types of resin. Materials and Design, 51. pp. 175-181. ISSN 0264-1275

Zhang, Zuhua and Wang, Hao and Provis, John L. and Reid, Andrew (2013) Efflorescence: A critical challenge for geopolymer applications? In: Concrete 2013: Understanding Concrete, 16-18 Oct 2013, Gold Coast, Australia.

Zhang, Zuhua and Yang, Tao and Wang, Hao and Yao, Xiao (2013) Inorganic polymer foams: transform from non-structural to structural upon fire. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Zhang, Zuhua and Wang, Hao and Provis, John L. and Reid, Andrew and Li, Qiang (2013) Durability of fly ash based-geopolymers: effect of crystallization on mechanical properties. In: 8th International Symposium on Cement and Concrete, 20-23 Sept 2013, Nanjing,China.

Yang, T. and Yao, X. and Zhang, Z. and Wang, H. (2012) Effects of ground granulated blast furnace slag on the mechanical and microstructure of fly ash-based geopolymer binders. In: 8th Asian-Australasian Conference on Composite Materials, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Zhang, Z. and Wang, H. and Provis, J. L. (2012) The reactivity of fly ash in geopolymer synthesis: a qualification study by FTIR. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Sirimanna, Chamila Sampath and Lokuge, Weena and Islam, Md Mainul and Aravinthan, Thiru (2012) Compressive strength characterization of polyester based fillers. In: PFAM 20: 20th International Symposium on Processing and Fabrication of Advanced Materials, 15-18 Dec 2011, Hong Kong.

Zhang, Z. and Wang, H. and Reid, A. and Aravinthan, T. (2011) Effects of fly ash source and curing procedure on strength development of geopolymers. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Zhuge, Yan (2010) Investigation of the effect of various additives on the strength of environmentally friendly permeable concrete. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Ku, H. and Chan, W. L. and Trada, M. and Baddeley, D. (2007) An evaluation of fracture toughness of vinyl ester composites cured under microwave conditions. Journal of Materials Engineering and Performance, 16 (6). pp. 741-745. ISSN 1059-9495

foam

Choy, Yat-Sze and Lau, Kin-Tak and Wang, C. and Chau, C. W. and Liu, Yang and Hui, David (2009) Composite panels for reducing noise in air conditioning and ventilation systems. Composites Part B: Engineering, 40 (4). pp. 259-266. ISSN 1359-8368

foam concrete

Li, Qiang and Wang, Hao and Zhang, Zuhua and Reid, Andrew (2013) Numerical simulation of porosity on thermal properties and fire resistance of foamed concrete. Journal of Sustainable Cement-Based Materials. pp. 1-7. ISSN 2165-0373 (In Press)

Li, Qiang and Wang, Hao and Bullen, Frank and Reid, Andrew (2012) Numerical simulation of porous structure in foam concrete on thermal insulation property. In: 8th Asian-Australasian Conference on Composite Materials, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

foam grenade

Thota, Narasimha M. and Epaarachchi, Jayantha A. and Lau, Kin-tak (2013) Effect of the energy absorbing mechanisms on the blunt thoracic trauma caused by a typical foam projectile. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

foam products

Thota, N. M. and Epaarachchi, J. A. and Lau, K. T. (2013) Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

force method model

Ma, Xing and Mills, Julie E. and Brown, Graham and Zhuge, Yan (2012) A force method model for static analysis of transmission line system subjected to in-plane and out-of-plane loadings. In: ICTAS 2011: 4th International Conference on Technology of Architecture and Structure, 22-24 Sep 2011, Xi'an, China.

formative assessments

Aravinthan, Thiru and Lokuge, Weena and Manalo, Allan (2011) Effectiveness of formative online quizzes in learning and teaching a structural engineering course. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

forming

Islam, Md Mainul and Kim, Ho Sung (2007) Manufacture of syntactic foams: pre-mold processing. Materials and Manufacturing Processes, 22 (1). pp. 28-36. ISSN 1042-6914

four-point bending

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

Fourier transform infrared spectroscopy (FTIR)

Chan, Mo-lin and Lau, Kin-tak and Wong, T. T. and Cardona, Francisco (2011) Interfacial bonding characteristic of nanoclay/polymer composites. Applied Surface Science, 258 (2). pp. 860-864. ISSN 0169-4332

fracture

Fu, H. M. and Zhang, H. F. and Wang, Hao and Zhang, Qingsheng and Hu, Z. Q. (2005) Synthesis and mechanical properties of Cu-based bulk metallic glass composites containing in-situ TiC particles. Scripta Materialia, 52 (7). pp. 669-673. ISSN 1359-6462

fracture mechanics

Goh, S. and Ku, H. and Ang, S. L. (2008) Prediction of crushing stress in composite materials. Journal of Composite Materials, 42 (5). pp. 467-484. ISSN 0021-9983

fracture mechanism

Yan, Z. L. and Wang, H. and Lau, K. T. and Pather, S. and Zhang, J. C. and Lin, G. and Ding, Y. (2013) Reinforcement of polypropylene with hemp fibres. Composites Part B: Engineering , 46. pp. 221-226. ISSN 1359-8368

fracture morphology

Fu, H. M. and Zhang, H. F. and Wang, Hao and Hu, Z. Q. (2007) Multifarious fracture features of CuZrAlGd(Ag) bulk metallic glasses. Advanced Materials Research, 29-30. pp. 47-50. ISSN 1022-6680

fracture toughness

Albdiry, M. T. and Yousif, B. F. (2014) Role of silanized halloysite nanotubes on structural, mechanical properties and fracture toughness of thermoset nanocomposites. Materials and Design, 57. pp. 279-288. ISSN 0261-3069

Albdiry, Mushtaq and Yousif, Belal and Ku, Harry (2013) Fracture toughness and toughening mechanisms of unsaturated polyester-based clay nanocomposites. In: 13th International Conference on Fracture , 16-21 Jun 2013, Beijing, China.

Ku, H. S. (2011) Relationship between different mechanical properties of phenol formaldehyde SLG-reinforced composites. Journal of Reinforced Plastics and Composites, 30 (15). pp. 1281-1292. ISSN 0731-6844

Cardona, Francisco and Aravinthan, Thiru and Fedrigo, Jessica and Moscou, Clarisse (2010) Synthesis of phenolic bio-resins for advanced composites in civil engineering structures. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Cardona, F. and Aravinthan, T. and Moscou, C. (2010) Modified PF resins for composite structures with improved mechanical properties. Polymers and Polymer Composites, 18 (6). pp. 297-306. ISSN 0967-3911

Ku, H. and Xiang, W. and Pattarachaiyakoop, N. (2009) Mathematical modeling of the fracture toughness of phenol formaldehyde composites reinforced with E-spheres. In: 2nd International Conference on Multi-functional Materials and Structures, 9-12 Oct 2009, Qingdao, China.

Ku, H. S. and Fok, S. C. and Siores, E. (2009) Contrasts on fracture toughness and flexural strength of varying percentages of SLG-reinforced phenolic composites. Journal of Composite Materials, 43 (8). pp. 885-895. ISSN 0021-9983

Ku, H. and Cardona, F. and Rogers, D. and Vandenbroucke, A. (2008) Effects of EPON on mechanical and thermal properties of epoxy resins. In: ICMMSE 2008: International Conference on Multifunctional Materials and Structures, 28-31 Jul 2008, Hong Kong.

Ku, H. and Chan, W. L. and Trada, M. and Baddeley, D. (2007) An evaluation of fracture toughness of vinyl ester composites cured under microwave conditions. Journal of Materials Engineering and Performance, 16 (6). pp. 741-745. ISSN 1059-9495

fragmentation

Shalwan, A. and Yousif, B. F. (2014) Investigation on interfacial adhesion of date palm/epoxy using fragmentation technique. Materials and Design , 53. pp. 928-937. ISSN 0261-3069

free energy

Liu, Liwi and Liu, Yanju and Leng, Jinsong and Lau, Kin-tak (2011) Electromechanical stability of compressible dielectric elastomer actuators. Smart Materials and Structures, 20 (11). p. 115015. ISSN 0964-1726

free vibration

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2012) Investigation of the free vibration behaviour of an innovative GFRP sandwich floor panel. Construction and Building Materials, 37. pp. 209-219. ISSN 0950-0618

Karunasena, Warna (2010) The effect of debonding on the natural frequencies of laminated fibre composite sandwich plates. In: 6th Australasian Congress on Applied Mechanics (ACAM 6) , 12-15 Dec 2010, Perth, Western Australia.

frequency

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2012) Investigation of the free vibration behaviour of an innovative GFRP sandwich floor panel. Construction and Building Materials, 37. pp. 209-219. ISSN 0950-0618

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Gonzalez, Felipe (2010) Investigation of frequency characteristics of GFRP/phenolic sandwich beams. In: 2010 Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

Awad, Ziad K. and Gonzalez, Felipe and Aravinthan, Thiru (2010) Advanced robust design optimization of FRP sandwich floor panels. IOP Conference Series: Materials Science and Engineering, 10 (1). 012182,1-012182,9. ISSN 1757-899X

frequency bands

Choy, Y. S. and Liu, Y. and Cheung, H. Y. and Xi, Q. and Lau, K. T. (2012) Development of composite plate for compact silencer design. Journal of Sound and Vibration, 331 (10). pp. 2348-2364. ISSN 0022-460X

friction

Aldousiri, B. and Shalwan, A. and Chin, C. W. (2013) A review on tribological behaviour of polymeric composites and future reinforcements. Advances in Materials Science and Engineering , 2013. pp. 1-8. ISSN 1687-8434

Yousif, B. F. and Chin, C. W. (2012) Epoxy composite based on kenaf fibers for tribological applications under wet contact conditions. Surface Review and Letters, 19 (5). pp. 1250050-1. ISSN 0218-625X

Nirmal, Umar and Hashim, Jamil and Lau, Saijod T. W. and Yuhazri, M. Y. and Yousif, B. F. (2012) Betelnut fibres as an alternative to glass fibres to reinforce thermoset composites: a comparative study. Textile Research Journal, 82 (11). pp. 1107-1120. ISSN 0040-5175

Singh, Narish and Yousif, B. F. and Rilling, Dirk (2011) Investigations on wear and frictional properties of kenaf fibre polyurethane composites under dry and wet contact conditions. International Journal of Precision Technology, 2 (4). pp. 375-387. ISSN 1755-2060

Yousif, B. F. and Nirmal, Umar and Wong, K. J. (2010) Three-body abrasion on wear and frictional performance of treated betelnut fibre reinforced epoxy (T-BFRE) composite. Materials and Design, 31 (9). pp. 4514-4521. ISSN 0264-1275; 0261-3069

Yousif, B. F. and Alsofyani, I. M. and Yusaf, Talal (2010) Adhesive wear and frictional characteristics of UHMWPE and HDPE sliding against different counterfaces under dry contact condition. Tribology, 4 (2). pp. 78-85. ISSN 1751-5831

Nirmal, Umar and Jamil, Nadia and Yousif, B. F. and Rilling, Dirk and Brevern, P. V. (2010) The potential of using treated betelnut fibres as reinforcement for tribo-bio polymeric composites subjected to dry/wet contact conditions. In: ICNP 2010: Macro to Nano Scales, 24-26 Sep 2010, Kottayam, India.

Guo, Qing Bing and Lau, Kin-Tak and Zheng, Bing Fa and Rong, Min Zhi and Zhang, Ming Qiu (2009) Imparting ultra-low friction and wear rate to epoxy by the incorporation of microencapsulated lubricant? Macromolecular Materials and Engineering, 294 (1). pp. 20-24. ISSN 1438-7492

friction coefficients

Guo, Qing Bing and Lau, Kin-Tak and Rong, Min Zhi and Zhang, Ming Qiu (2010) Optimization of tribological and mechanical properties of epoxy through hybrid filling. Wear, 269 (1-2). pp. 13-20. ISSN 0043-1648

FRP

Islam, Md Mainul and Aravinthan, Thiru and Williams, Paul Garreth (2012) Behaviour of pultruded FRP hollow sections under eccentric loading. In: 6th International Conference on FRP Composites in Civil Engineering (CICE 2012), 13-15 Jun 2012, Rome, Italy.

Guades, E. J. and Aravinthan, T. and Islam, M. M. (2011) Driveability of composite piles. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011) , 27-29 Apr 2011, Brisbane, Australia.

Zhuge, Y. and Yeap, K. X. (2011) Assessment of debonding failure models for FRP retrofitted URM structures. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials , 7-10 Dec 2010, Melbourne, Australia.

Guades, E. J. and Sirimanna, C. S. and Aravinthan, T. and Islam, M. M. (2011) Behaviour of fibre composite pile under axial compression load. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Sirimanna, Chamila S. and Islam, Md Mainul and Aravinthan, Thiru (2010) Effects of temperature on a pultruded FRP composite. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Western Australia.

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2010) Temperature effects on full scale FRP bridge using innovative composite components. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2009) Finite element analysis of fibre composite sandwich panel. In: Southern Engineering Conference, 17-18 Oct 2009, Springfield, Queensland, Australia.

Zhuge, Yan and Yeap, Kai (2009) Debonding characteristics of masonry structures retrofitted with FRP. In: 17th Annual International Conference on Composites or Nano Engineering ICCE17, 26 Jul-1 Aug 2009, Honolulu, Hawaii, USA.

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2007) Innovative all composite multi-pultrusion truss systems: FE modelling and behavioural issues. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

Pandey, G. R. and Mutsuyoshi, H. and Aravinthan, T. (2007) Retrofitting reinforced concrete bridge frames using externally bonded FRP sheets. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

Omar, T. and Aravinthan, T. and Van Erp, G. (2007) The effect of core architecture on the behaviour of sandwich columns under edgewise compression loading. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

FRP composites

Maranan, G. B. and Manalo, A. C. (2013) Investigation on the mechanical behavior of hybrid fibre reinforced polymer composite beam. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 December 2013, Melbourne, Australia.

Guades, E. J. and Aravinthan, T. and Manalo, A. C. and Islam, M. M. (2013) Effects of energy level and impact repetitions on the impact fatigue behaviour and post-impact flexural properties of square FRP pultruded tubes. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

FRP confinement

Lokuge, W. and Eberhard, D. and Karunasena, W. (2012) Geopolymer concrete with FRP confinement. In: 6th International Composites Conference (ACUN 6): Composites and Nanocomposites in Civil, Offshore and Mining Infrastructure , 14-16 Nov 2012, Melbourne, Australia.

Lokuge, W. P. and Setunge, S. and Sanjayan, J. G. (2011) Stress-strain model for high strength concrete confined by FRP. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

FRP materials

Shinozaki, Hiroo and Aravinthan, Thiru and Pandey, Govinda Raj and Mutsuyoshi, Hiroshi (2007) Advancements in retrofitting reinforced concrete structures in Japan using FRP sheets. In: 23rd Biennial Conference of the Concrete Institute of Australia: Concrete for Future, 18-20 Oct 2007, Adelaide, Australia.

FRP pultruded tubes

Guades, Ernesto J. and Aravinthan, Thiru and Islam, Md. Mainul and Manalo, Allan C. (2012) Stiffness of FRP pultruded tubes under repeated axial impacts. In: 3rd Asia-Pacific Conference on FRP in Structures (APFIS 2012), 2-4 Feb 2012, Sapporo, Japan.

FRP retrofitting

Zhuge, Y. (2010) FRP-retrofitted URM walls under in-plane shear: review and assessment of available models. Journal of Composites for Construction, 14 (6). pp. 743-753. ISSN 1090-0268

FRP structures

Kahandawa, G. C. and Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) Detecting delamination in a composite structure using an embedded FBG – AE hybrid system. In: 7th Australasian Congress on Applied Mechanics (ACAM 7), 9-12 Dec 2012, Adelaide, Australia.

FTIR

Zhang, Zuhua and Wang, Hao and Provis, John L. (2012) Quantitative study of the reactivity of fly ash in geopolymerization by FTIR. Journal of Sustainable Cement-Based Materials, 1 (4). pp. 154-166. ISSN 2165-0373

Zhang, Z. and Wang, H. and Provis, J. L. (2012) The reactivity of fly ash in geopolymer synthesis: a qualification study by FTIR. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

fuel cell

Bose, Saswata and Kuila, Tapas and Nguyen, Thi Xuan Hien and Kim, Nam Hoon and Lau, Kin-tak and Lee, Joong Hee (2011) Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenge. Progress in Polymer Science, 36 (6). pp. 813-843. ISSN 0079-6700

full-scale testing

Epaarachchi, Jayantha A. and Clausen, Philip D. (2004) Accelerated full scale fatigue testing of a small composite wind turbine blade using a mechanically operated test rig. In: 2004 Structural Integrity and Fracture International Conference (SIF2004), 26-29 Sept 2004, Brisbane, Australia.

fullerene

Fang, Zhengping and Shang, Shuying and Wang, Hao (2013) Confinement of C60 nanoparticles on the dynamics of polystyrene studied by anelastic spectroscopy and rheometrics. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

garamite

Ku, Harry Siu-Lung and Cardona, Francisco and Trada, Mohar and Vigier, Gurlaume (2009) Flexural properties of sawdust reinforced phenolic composites: pilot study. Journal of Applied Polymer Science, 114 (3). pp. 1927-1934. ISSN 0021-8995

gel time

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2011) Preliminary development of polymer based filler materials for GFRP tubular connector. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

gelatinisation

Islam, Md Mainul and Kim, Ho Sung (2011) Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment. Journal of Materials Processing Technology, 211 (4). pp. 708-716. ISSN 0924-0136

Islam, Md Mainul and Kim, Ho Sung (2008) Pre-mould processing for syntactic foams: modelling, theory and experiment. In: 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME-13), 27-29 May, 2008, Cairo, Egypt.

gelatinization

Islam, Md Mainul and Kim, Ho Sung (2008) Manufacture of syntactic foams using starch as binder: post-mold processing. Materials and Manufacturing Processes, 23 (8). pp. 884-892. ISSN 1042-6914

Islam, Md Mainul and Kim, Ho Sung (2007) Manufacture of syntactic foams: pre-mold processing. Materials and Manufacturing Processes, 22 (1). pp. 28-36. ISSN 1042-6914

genetice algorithm

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2010) Cost optimum design of structural fibre composite sandwich panel for flooring applications. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

geometry effects

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

geopolymer

Zhu, Huajun and Zhang, Zuhua and Deng, Fenggan and Cao, Yalong (2013) The effects of phase changes on the bonding property of geopolymer to hydrated cement. Construction and Building Materials, 48. pp. 124-130. ISSN 0950-0618

Zhang, Zuhua and Wang, Hao and Provis, John L. and Reid, Andrew (2013) Efflorescence: A critical challenge for geopolymer applications? In: Concrete 2013: Understanding Concrete, 16-18 Oct 2013, Gold Coast, Australia.

Zhang, Zuhua and Yang, Tao and Wang, Hao and Yao, Xiao (2013) Inorganic polymer foams: transform from non-structural to structural upon fire. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Zhang, Zuhua and Provis, John L. and Wang, Hao and Bullen, Frank and Reid, Andrew (2013) Quantitative kinetic and structural analysis of geopolymers part 2. thermodynamics of sodium silicate activation of metakaolin. Thermochimica Acta , 565. pp. 163-171. ISSN 0040-6031

Zhang, Zuhua and Wang, Hao and Provis, John L. and Reid, Andrew and Li, Qiang (2013) Durability of fly ash based-geopolymers: effect of crystallization on mechanical properties. In: 8th International Symposium on Cement and Concrete, 20-23 Sept 2013, Nanjing,China.

Yang, Tao and Yao, Xiao and Zhang, Zuhua and Wang, Hao (2012) Mechanical property and structure of alkali-activated fly ash and slag blends. Journal of Sustainable Cement-Based Materials, 1 (4). pp. 167-178. ISSN 2165-0373

Zhang, Zuhua and Wang, Hao and Provis, John L. (2012) Quantitative study of the reactivity of fly ash in geopolymerization by FTIR. Journal of Sustainable Cement-Based Materials, 1 (4). pp. 154-166. ISSN 2165-0373

Yang, T. and Yao, X. and Zhang, Z. and Wang, H. (2012) Effects of ground granulated blast furnace slag on the mechanical and microstructure of fly ash-based geopolymer binders. In: 8th Asian-Australasian Conference on Composite Materials, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Zhang, Z. and Wang, H. and Provis, J. L. (2012) The reactivity of fly ash in geopolymer synthesis: a qualification study by FTIR. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Zhang, Zuhua and Yao, Xiao and Wang, Hao (2012) Potential application of geopolymers as protection coatings for marine concrete III. Field experiment. Applied Clay Science, 67-68. pp. 57-60. ISSN 0169-1317

Zhang, Zuhua and Wang, Hao and Provis, John L. and Bullen, Frank and Reid, Andrew and Zhu, Yingcan (2012) Quantitative kinetic and structural analysis of geopolymers, Part 1. The activation of metakaolin with sodium hydroxide. Thermochimica Acta, 539. pp. 23-33. ISSN 0040-6031

Zhang, Z. and Wang, H. and Yao, X. and Zhu, Y. (2012) Effects of halloysite in kaolin on the formation and properties of geopolymers. Cement and Concrete Composites, 34 (5). pp. 709-715. ISSN 0958-9465

geopolymer concrete

Lokuge, Weena and Karunasena, W. and Heemskerk, Colin (2013) Effect of strain rate on geopolymer concrete. In: Concrete 2013: Understanding Concrete, 16-18 Oct 2013, Gold Coast, Australia.

Lokuge, W. and Eberhard, D. and Karunasena, W. (2012) Geopolymer concrete with FRP confinement. In: 6th International Composites Conference (ACUN 6): Composites and Nanocomposites in Civil, Offshore and Mining Infrastructure , 14-16 Nov 2012, Melbourne, Australia.

geopolymers

Zhu, Huajun and Zhang, Zuhua and Zhu, Yingcan and Tian, Liang (2014) Durability of alkali-activated fly ash concrete: chloride penetration in pastes and mortars. Construction and Building Materials , 65. pp. 51-59. ISSN 0950-0618

Zhang, Z. and Wang, H. and Reid, A. and Aravinthan, T. (2011) Effects of fly ash source and curing procedure on strength development of geopolymers. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Wang, Hao (2010) Sustainable materials research at USQ. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

GFRP

Sirimanna, C. S. and Karunasena, W. and Manalo, A. C. and Banerjee, S. and McGarva, L. (2013) Analysis of internal bonded fibre reinforced composite repair systems for corroded steel pipelines. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 Dec 2013, Melbourne, Australia .

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2012) Design of smart structures for wind turbine blades. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Sirimanna, Chamila Sampath and Islam, Md Mainul and Aravinthan, Thiru (2011) Polymer based filler materials as infill for GFRP pile connector. In: ICCST8: 8th International Conference on Composite Science and Technology, 22-24 Mar 2011, Kuala Lumpur, Malaysia.

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2011) Preliminary development of polymer based filler materials for GFRP tubular connector. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

GFRP composites

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

GFRP sandwich

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2012) Investigation of the free vibration behaviour of an innovative GFRP sandwich floor panel. Construction and Building Materials, 37. pp. 209-219. ISSN 0950-0618

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2012) Experimental and numerical analysis of an innovative GFRP sandwich floor panel under point load. Engineering Structures, 41. pp. 126-135. ISSN 0141-0296

GFRP structures

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) An investigation of effective detection length of a localized micro-failure in a laminated thin composite plate using FBG sensor integrated AE system. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8) :Composites: Enabling Tomorrow’s Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

glass

Yousif, B. F. and El-Tayeb, N. S. M. (2010) Wear characteristics of thermoset composite under high stress three-body abrasive. Tribology International, 43 (12). pp. 2365-2371. ISSN 0301-679X

Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2007) Tungsten fibre reinforced Zr-based bulk metallic glass composites. Materials and Manufacturing Processes, 22 (5-6). pp. 687-691. ISSN 1042-6914

glass chemistry

Zhang, Zuhua and Wang, Hao and Provis, John L. (2012) Quantitative study of the reactivity of fly ash in geopolymerization by FTIR. Journal of Sustainable Cement-Based Materials, 1 (4). pp. 154-166. ISSN 2165-0373

Zhang, Z. and Wang, H. and Provis, J. L. (2012) The reactivity of fly ash in geopolymer synthesis: a qualification study by FTIR. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

glass fiber composites

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2012) Mechanical properties characterization of the skin and core of a novel composite sandwich structure. Journal of Composite Materials. ISSN 0021-9983 (In Press)

glass fiber reinforced composites

Hafizi, Mohd Zohari and Epaarachchi, Jayantha Ananda and Lau, K. T. (2013) Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test. In: 4th Asia-Pacific Workshop on Structural Health Monitoring (APWSHM 2012), 5-7 Dec 2012, Melbourne, Australia.

glass fiber reinforced plastics

Asamoto, S. and Mutsuyoshi, H. and Aravinthan, T. and Suzukawa, K. (2008) Experimental investigation of innovative hybrid composite girders with GFRP and CFRP. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

glass fiber-reinforced epoxy

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

glass fibre

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2014) An overview of mechanical properties and durability of glass-fibre reinforced recycled mixed plastic waste composites. Materials and Design, 62. pp. 98-112. ISSN 0264-1275

Aldousiri, B. and Alajmi, M. and Shalwan, A. (2013) Mechanical properties of palm fibre reinforced recycled HDPE. Advances in Materials Science and Engineering , 2013. pp. 1-7. ISSN 1687-8434

Manalo, Allan and Mutsuyoshi, Hiroshi and Aravinthan, Thiru and Matsui, Takahiro (2009) Behaviour of hybrid FRP composite I-girder with concrete deck. In: FRPRCS-9: Current Challenges and Future Trends, 13-15 July 2009, Sydney, Australia.

Ku, Harry S. and Yusaf, Talal (2008) Processing of composites using variable and fixed frequency microwave facilities. Progress in Electromagnetic Research B, PIERB . pp. 185-205. ISSN 1937-6472

Ku, Harry S. (2006) Productivity improvement of composites processing through the use of industrial microwave technologies. Progress in Electromagnetics Research (PIER), PIER 6. pp. 267-285. ISSN 1559-8985

Ku, Harry S. and Ball, James A. R. and Siores, Elias and Chan, Peter (1999) Loss tangent for low loss thermoplastic composites. Science and Engineering of Composite Materials, 8 (3). pp. 123-128. ISSN 0792-1233

glass fibre composite

Awad, Ziad K. and Yusaf, Talal F. (2011) Finite element analysis of fibre reinforce concrete beam subject to high temperature by using EURO-code models. In: ICCST8: 8th International Conference on Composite Science and Technology, 22-24 Mar 2011, Kuala Lumpur, Malaysia.

glass fibre composites

Epaarachchi, Jayantha A. (2006) Effects of static-fatigue (tension) on the tension-tension fatigue life of glass fibre reinforced plastic composites. Composite Structures, 74 (4). pp. 419-425. ISSN 0263-8223

Epaarachchi, Jayantha A. (2005) Effects of static fatigue on the tension-tension fatigue life of glass / polyester composites. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005): Advances in Applied Mechanics, 16-18 Feb 2005, Melbourne, Australia.

glass fibre reinforced polymer

Guades, Ernesto Jusayan (2013) Behaviour of glass FRP composite tubes under repeated impact for piling application. [Thesis (PhD/Research)] (Unpublished)

Awad, Ziad Khalaf (2012) Novel fibre composite civil engineering sandwich structures: behaviour, analysis, and optimum design. [Thesis (PhD/Research)] (Unpublished)

glass fibre reinforced polymers

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

glass fibre-reinforced polymer

Karunasena, W. and Jayatilake, I. and Lokuge, W. (2013) Free vibration behaviour of fibre composite sandwich beams with debonds. In: 4th International Conference on Structural Engineering and Construction Management 2013 (ICSECM 2013), 13-15 Dec 2013, Kandy, Sri Lanka.

glass fibres

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2013) Multi-objective design optimisation of GFRP sandwich beams. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Epaarachchi, Jayantha A. and Clausen, Philip D. (2005) A new cumulative fatigue damage model for glass fibre reinforced plastic composites under step/discrete loading. Composites Part A: Applied Science and Manufacturing, 36 (9). pp. 1236-1245. ISSN 1359-835X

glass forming ability

Wang, Hao (2010) The role of casting temperature in preparation of bulk metallic glasses. In: THERMEC 2009: 6th International Conference on Processing and Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications, 25-29 Aug 2009, Berlin, Germany.

glass hollow spheres

Ku, H. and Trada, M. and Nixon, R. and Wong, P. (2010) Flexural properties of phenolic resin reinforced with glass powder: preliminary results. Journal of Applied Polymer Science, 116 (1). pp. 347-354. ISSN 0021-8995

Ku, Harry S. and Trada, Mohan and Zong, Xuejin and Wong, Peter (2009) Flexural properties of phenolic resin reinforced with glass powder. In: ICAST 2009: 20th International Conference on Adaptive Structures and Technologies , 20-22 Oct 2009, Shatin, Hong Kong.

glass microspheres

Ku, H. and Trada, M. and Cecil, T. and Wong, P. (2010) Tensile tests of phenol formaldehyde glass-powder-reinforced composites: pilot study. Journal of Applied Polymer Science, 116 (1). pp. 10-17. ISSN 0021-8995

glass non-uniform strain

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

glass powder

Ku, H. and Epaarachchi, J. and Trada, M. and Wong, P. (2013) Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves. Journal of Reinforced Plastics and Composites, 32 (10). pp. 689-699. ISSN 0731-6844

Ku, H. and Wong, P. (2012) Contrast on tensile and flexural properties of glass powder reinforced epoxy composites: pilot study. Journal of Applied Polymer Science, 123 (1). pp. 152-161. ISSN 0021-8995

Ku, H. and Wong, P. and Huang, J. and Fung, H. and Trada, M. (2012) Flexural properties of epoxy composites filled with glass powder: preliminary results. Advanced Material Research, 410. pp. 309-312. ISSN 1022-6680

Ku, Harry and Cardona, Francisco and Jamal Eddine, Mustapha (2012) Thermal properties of calcium carbonate powder reinforced vinyl ester composites: pilot study. Journal of Applied Polymer Science . ISSN 0021-8995 (In Press)

Ku, H. and Wong, P. and Huang, J. and Fung, H. and Mohan, T. (2011) Tensile tests of glass powder reinforced epoxy composites: pilot study. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

Ku, H. and Trada, M. and Huq, R. (2010) A pilot study on the flexural properties of vinyl ester composites filled with glass powder. In: MFMS 2010: 3rd International Conference on Multi-Functional Materials and Structures, 14-18 Sep 2010, Jeonju, South Korea.

Ku, H. and Trada, M. and Nixon, R. and Wong, P. (2010) Flexural properties of phenolic resin reinforced with glass powder: preliminary results. Journal of Applied Polymer Science, 116 (1). pp. 347-354. ISSN 0021-8995

Ku, H. and Trada, M. and Cecil, T. and Wong, P. (2010) Tensile tests of phenol formaldehyde glass-powder-reinforced composites: pilot study. Journal of Applied Polymer Science, 116 (1). pp. 10-17. ISSN 0021-8995

Ku, Harry S. and Trada, Mohan and Zong, Xuejin and Wong, Peter (2009) Flexural properties of phenolic resin reinforced with glass powder. In: ICAST 2009: 20th International Conference on Adaptive Structures and Technologies , 20-22 Oct 2009, Shatin, Hong Kong.

glass transition temperature

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak (2013) Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines. Materials and Design, 52. pp. 315-327. ISSN 0264-1275

Ku, Harry and Cardona, Francisco and Jamal Eddine, Mustapha (2012) Thermal properties of calcium carbonate powder reinforced vinyl ester composites: pilot study. Journal of Applied Polymer Science . ISSN 0021-8995 (In Press)

Ku, H. and Wong, P. and Maxwell, A. and Huang, J. and Fung, H. and Mohan, T. (2011) A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

Ku, H. and Cardona, F. and Ball, J. and Jacobson, W. and Trada, M. (2008) Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study. Journal of Composite Materials, 42 (19). pp. 2083-2095. ISSN 0021-9983

Ku, H. and Cardona, F. and Rogers, D. and Vandenbroucke, A. (2008) Effects of EPON on mechanical and thermal properties of epoxy resins. In: ICMMSE 2008: International Conference on Multifunctional Materials and Structures, 28-31 Jul 2008, Hong Kong.

glass-fibre

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2014) Tensile properties of glass fibre reinforced recycled mixed plastic composites. In: Australasian Composites Conference (CA 2014): Materials for a Lighter and Smarter World, 7–9 Apr 2014, Newcastle, Australia.

glass-forming ability

Zhu, Z. W. and Zhang, H. F. and Wang, Hao and Ding, B. Z. and Hu, Z. Q. and Huang, Han (2009) Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting. Journal of Materials Research, 24 (10). pp. 3108-3115. ISSN 0884-2914

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2007) A practical thermodynamic method to calculate the best glass-forming composition for bulk metallic glasses. International Journal of Nonlinear Sciences and Numerical Simulation, 8 (2). pp. 171-178. ISSN 1565-1339

glasses

Hafizi, Z. M. and Epaarachchi, J. and Nizwan, C. K. E. and Lau, K. T. (2012) Non-velocity based analysis of passive ultrasonic signal for source lLocation detection in composite plates: a pilot study. IOP Conference Series: Materials Science and Engineering, 36 (1). ISSN 1757-8981

globular structure

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

glucose

Dohnal, Ludek and Faigl, Paul (2007) Evaluation of the linearity of calibration dependence. In: Quality assurance of analytical results, 26-28 Mar 2007, (Beskydy), Czech Republic. (Unpublished)

glue-laminated beam

Manalo, Allan C. and Aravinthan, Thiru (2011) Flexural behaviour of glulam beams from novel sandwich panels. In: 16th International Conference on Composite Structures (ICCS 16), 28-30 July 2011, Porto, Portugal.

glue-laminated beams

Manalo, Allan and Maranan, Ginghis and Van Erp, Gerard (2013) Glue-laminated composite sandwich beams for structural engineering and construction. In: Thirteenth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC13), 11-13 Sept 2013, Sapporro, Japan.

Manalo, Allan and Aravinthan, Thiru (2012) Behaviour of full-scale railway turnout sleepers from glue-laminated fibre composite sandwich structures. Journal of Composites for Construction, 16 (6). pp. 724-736. ISSN 1090-0268

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) Flexural behaviour of glue-laminated fibre composite sandwich beams. Composite Structures, 92 (11). pp. 2703-2711. ISSN 0263-8223

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna (2010) Behaviour of structural glulam beams from sustainable fibre composite sandwich panels. In: 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference (CECAR5 and ASEC2010): Innovative Community Building, 8-12 Aug 2010, Sydney, Australia.

glued sandwich beams

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2013) Shear behaviour of glued structural fibre composite sandwich beams. Construction and Building Materials, 47. pp. 1317-1327. ISSN 0950-0618

glulam beams

Manalo, A. C. and Aravinthan, T. (2011) The effects of fibre wraps on the flexural behaviour of glulam composite sandwich beams. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011), 27-29 Apr 2011, Brisbane, Australia.

Manalo, Allan C. and Aravinthan, Thiru and Karunasena, Warna (2010) Evaluation of the strength and stiffness of glue-laminated fibre composite sandwich panels for structural beam application. In: 6th Australasian Congress on Applied Mechanics (ACAM 6), 12-15 Dec 2010, Perth, Western Australia.

glycerol

Cardona, F. and Ku, H. and Chouzenoux, L. (2010) Effect of tannin on flexural properties of phenol formaldehyde glycerol reinforced composites: preliminary results. Journal of Reinforced Plastics and Composites, 29 (24). pp. 3543-3553. ISSN 0731-6844

gomuti

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2014) A study into the characteristics of gomuti (Arenga pinnata) fibre for usage as natural fibre composites. Journal of Reinforced Plastics and Composites, 33 (2). pp. 179-192. ISSN 0731-6844

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2013) A review on the characteristics of gomuti fibre and its composites with thermoset resins. Journal of Reinforced Plastics and Composites, 32 (2). pp. 124-136. ISSN 0731-6844

gomuti fibre

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2011) Experimental investigation into gomuti fibres/polyester composites. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

good correlations

Epaarachchi, J. and Ku, H. and Gohel, K. (2010) A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites. Journal of Composite Materials, 44 (6). pp. 779-788. ISSN 0021-9983

government

Butcher, Peter and Thorpe, David (2007) A review of triple helix linkages in New Zealand earthquake engineering networks and comparison with the Australian cooperative research centre model. In: Triple Helix VI: 6th Biennial International Conference on University, Industry and Government Linkages, 16-18 May 2007, Singapore.

grain coarsening

Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275

grain growth

Liu, Hui-min and Li, Zhi-peng and Wang, Hao (2013) Effect of in-situ TiC particles on hot deformation behavior of spray formed 7075 Al alloy. Transactions of Materials and Heat Treatment (Cailiao Rechuli Xuebao), 34 (S2). pp. 173-178. ISSN 1009-6264

grain morphologies

Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275

grain size

Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275

Ning, Zhiliang and Cao, P. and Wang, Hao and Sun, Jianfei and Liu, Diankun (2007) Effect of cooling conditions on grain size of AZ91 alloy. Journal of Materials Science and Technology, 23 (5). pp. 645-649. ISSN 1005-0302

grain structure

Wang, H. and Estrin, Y. and Fu, H. M. and Song, G. L. and Zuberova, Z. (2007) The effect of pre-processing and grain structure on the bio-corrosion and fatigue resistance of magnesium alloy AZ31. Advanced Engineering Materials, 9 (11). pp. 967-972. ISSN 1438-1656

grain structures

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

graphene

Lau, Alan kin-tak (2011) Carbon nanotube-reinforced nanocomposites. In: Multifunctional polymer nanocomposites. Taylor & Francis (CRC Press), Boca Raton, FL. United States, pp. 19-45. ISBN 978-1-4398-1682-0

graphene nanosheets

Liu, Shan and Yan, Hongqiang and Fang, Zhengping and Wang, Hao (2014) Effect of graphene nanosheets on morphology, thermal stability and flame retardancy of epoxy resin. Composites Science and Technology, 90. pp. 40-47. ISSN 0266-3538

Bose, Saswata and Kuila, Tapas and Uddin, Md. Elias and Kim, Nam Hoon and Lau, Alan K. T. and Lee, Joong Hee (2010) In-situ synthesis and characterization of electrically conductive polypyrrole/graphene nanocomposites. Polymer, 51 (25). pp. 5921-5928. ISSN 0032-3861

graphite

Lau, Alan kin-tak (2011) Carbon nanotube-reinforced nanocomposites. In: Multifunctional polymer nanocomposites. Taylor & Francis (CRC Press), Boca Raton, FL. United States, pp. 19-45. ISBN 978-1-4398-1682-0

green building materials

Manthey, Nathan W. and Cardona, Francisco and Francucci, Gaston M. and Aravinthan, Thiru (2012) Green building materials: hemp oil based biocomposites. In: 2012 World Academy of Science, Engineering and Technology Conference (WASET 2012), 24-25 Oct 2012, Bali, Indonesia.

green composites

Cheng, Sha and Lau, Kin-Tak and Liu, Tao and Zhao, Yong-Qing and Lam, Pou-Man and Yin, Yansheng (2009) Mechanical and thermal properties of chicken feather fiber/PLA green composites. Composites Part B: Engineering, 40 (7). pp. 650-654. ISSN 1359-8368

green materials

Manthey, N. W. and Cardona, F. and Aravinthan, T. (2011) Mechanical properties of epoxidized hemp oil based biocomposites: preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27 -29 Apr 2011, Brisbane, Australia.

Wang, Hao (2010) Sustainable materials research at USQ. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

grillage beam analogy

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Stevens, Nick (2012) Analysis of a typical railway turnout sleeper system using grillage beam analogy. Finite Elements in Analysis and Design, 48 (1). 1376-1391 . ISSN 0168-874X

Manalo, A. C. and Aravinthan, T. and Karunasena, W. and Stevens, N. (2011) The effect of modulus of elasticity on the behaviour of railway turnout sleepers. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

grout

Shamsuddoha, M. and Islam, M. M. and Aravinthan, T. and Manalo, A. C. and Lau, K. T. (2013) Mechanical properties of epoxy grouts for structural repair. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

halloysite

Zhang, Z. and Wang, H. and Yao, X. and Zhu, Y. (2012) Effects of halloysite in kaolin on the formation and properties of geopolymers. Cement and Concrete Composites, 34 (5). pp. 709-715. ISSN 0958-9465

halloysite nanotubes

Albdiry, M. T. and Yousif, B. F. (2014) Role of silanized halloysite nanotubes on structural, mechanical properties and fracture toughness of thermoset nanocomposites. Materials and Design, 57. pp. 279-288. ISSN 0261-3069

Albdiry, M. T. and Ku, H. and Yousif, B. F. (2013) Impact fracture behaviour of silane-treated halloysite nanotubes-reinforced unsaturated polyester. Engineering Failure Analysis, 35. pp. 718-725. ISSN 1350-6307

Albdiry, M. T. and Yousif, B. F. (2013) Morphological structures and tribological performance of unsaturated polyester based untreated/silane-treated halloysite nanotubes. Materials and Design, 48. pp. 68-76. ISSN 0264-1275

hanger

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2007) Innovative all composite multi-pultrusion truss system for stressed arch deployable shelters. In: AICSGE 6: 6th Alexandria International Conference on Structural and Geotechnical Engineering, 15-17 Apr 2007, Alexandria, Egypt.

Omar, T. and Van Erp, G. and Key, P. (2007) Modular deployable composite shelters - truss system. In: ACIC 2007: Advanced Composites in Construction Conference , 2-4 Apr 2007, Bath, UK.

Omar, T. and Van Erp, G. and Key, P. W. (2006) Stressed arch modular deployable composite shelters: concept and development. In: CICE 2006: 3rd International Conference on FRP Composites in Civil Engineering, 13-15 Dec 2006, Miami, Fl, USA.

hardness

Lau, Mei-ling and Lau, Kin-tak and Ku, Harry and Bahattacharyya, Debes and Lee, Joong-Hee (2012) Assessing heat-treatment effects on bovine cortical bones by nanoindentation. In: PFAM 20: 20th International Symposium on Processing and Fabrication of Advanced Materials , 15-18 Dec 2011, Hong Kong.

Fu, H. M. and Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2006) In situ TiB-reinforced cu-based bulk metallic glass composites. Scripta Materialia, 54 (11). pp. 1961-1966. ISSN 1359-6462

hardwood timber

Manalo, A. and Aravinthan, T. and Karunasena, W. and Ticoalu, A. (2010) A review of alternative materials for replacing existing timber sleepers. Composite Structures, 92 (3). pp. 603-611. ISSN 0263-8223

HDPE

Yousif, B. F. and Alsofyani, I. M. and Yusaf, Talal (2010) Adhesive wear and frictional characteristics of UHMWPE and HDPE sliding against different counterfaces under dry contact condition. Tribology, 4 (2). pp. 78-85. ISSN 1751-5831

head impact

Thota, N. M. and Epaarachchi, J. A. and Lau, K. T. (2013) Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

head injury criterion

Thota, N. M. and Epaarachchi, J. A. and Lau, K. T. (2013) Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

headform

Thota, N. M. and Epaarachchi, J. A. and Lau, K. T. (2013) Effect of the foam embellishments on the pedestrian safety of the vehicle front protection systems. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

headstock

Aravinthan, Thiru and Heldt, Tim (2005) Strengthening of bridge headstocks with external post-tensioning: design issues and strengthening techniques. In: Road System and Engineering Technology Forum, 9-11 August 2005, Brisbane, Australia.

headstocks

Aravinthan, T. and Heldt, T. (2010) Innovative strengthening technique using post-tensioned fibre composite wraps for bridge headstocks. Australian Journal of Structural Engineering, 11 (2). pp. 117-128. ISSN 1328-7982

health monitoring

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

heart rates

Lau, Sindy Mei-Ling and Lau, Kin-Tak and Yin, Yan-Sheng and Li, Lan and Wong, May and Chan, Kevin and Chen, William (2010) A shape memory alloy energy absorber for backpack design. Materials and Manufacturing Processes, 25 (4). pp. 281-286. ISSN 1042-6914

heat

Wang, Hao and Ning, Zhiliang and Liang, W. Z. and Cao, Fuyang and Sun, Jianfei (2009) Microstructure and properties of Mg-Nd-Zn-Zr alloys. In: 4th International Light Metals Technology Biennial Conference (LMT2009), 29 June - 1 July 2009, Gold Coast, Australia.

heat affected zone

Ku, Harry S. and Siores, Elias and Ball, James A. R. (1999) Microwave facilities for welding thermoplastic composites and preliminary results. Journal of Microwave Power and Electromagnetic Energy, 34 (4). pp. 195-205. ISSN 0832-7823

heat applied

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2013) Smart structure for small wind turbine blade. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

heat released

Cardona, F. and Rogers, D. and Van Erp, G. (2007) Investigation by TGA-FTIR of the effect of styrene content and thickness on the UV-curing of vinylester resins. Journal of Thermoplastic Composite Materials, 20 (6). pp. 601-615. ISSN 0892-7057

heat treatment

Lau, Mei-ling and Lau, Kin-tak and Ku, Harry and Bahattacharyya, Debes and Lee, Joong-Hee (2012) Assessing heat-treatment effects on bovine cortical bones by nanoindentation. In: PFAM 20: 20th International Symposium on Processing and Fabrication of Advanced Materials , 15-18 Dec 2011, Hong Kong.

Lau, Mei-Ling and Lau, Kin-Tak and Ku, Harry and Bahattacharyya, Debes and Yao, Yan-Dong (2012) Measurements of heat treatment effects on bovine cortical bones by nanoindentation and compression testing. Journal of Biomaterials and Nanobiotechnology, 3 (1). pp. 105-113. ISSN 2158-7027

heavy loads

Lau, Sindy Mei-Ling and Lau, Kin-Tak and Yin, Yan-Sheng and Li, Lan and Wong, May and Chan, Kevin and Chen, William (2010) A shape memory alloy energy absorber for backpack design. Materials and Manufacturing Processes, 25 (4). pp. 281-286. ISSN 1042-6914

height reduction

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

hemicellulose constituents

Kabir, Mohammad Mazedul (2012) Effects of chemical treatments on hemp fibre reinforced polyester composites. [Thesis (PhD/Research)] (Unpublished)

hemp

Yan, Zili and Zhang, Jianchun and Zhang, Hua and Wang, Hao (2013) Improvement of mechanical properties of noil hemp fiber reinforced polypropylene composites by resin modification and fiber treatment. Advances in Materials Science and Engineering. pp. 1-7. ISSN 1687-8434

hemp fibre

Etaati, Amir and Pather, Selvan and Fang, Zhengping and Wang, Hao (2014) The study of fibre/matrix bond strength in short hemp polypropylene composites from dynamic mechanical analysis. Composites Part B: Engineering, 62 (2014). pp. 19-28. ISSN 1359-8368

Yan, Z. L. and Zhang, J. C. and Lin, G. and Zhang, H. and Ding, Y. and Wang, H. (2013) Fabrication process optimization of hemp fibre-reinforced polypropylene composites. Journal of Reinforced Plastics and Composites, 32 (20). pp. 1504-1512. ISSN 0731-6844

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. (2013) Tensile properties of chemically treated hemp fibres as reinforcement for composites. Composites Part B: Engineering , 53. pp. 362-368. ISSN 1359-8368

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. (2013) Effects of chemical treatments on hemp fibre structure. Applied Surface Science , 276. pp. 13-23. ISSN 0169-4332

Yan, Z. L. and Wang, H. and Lau, K. T. and Pather, S. and Zhang, J. C. and Lin, G. and Ding, Y. (2013) Reinforcement of polypropylene with hemp fibres. Composites Part B: Engineering , 46. pp. 221-226. ISSN 1359-8368

Yan, Z. L. and Wang, H. and Lau, K. T. and Zhang, J. C. and Zhang, H. and Ding, Y. (2012) Fabrication process optimization of hemp fibre reinforced polypropylene composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Kabir, Mohammad Mazedul and Wang, Hao and Lau, Alan and Cardona, Francisco and Aravinthan, Thiru (2012) Compressive properties of chemically-treated hemp fibre reinforced composites. In: Composites Australia and CRC-ACS, 2012 Conference: Diversity in Composite, 15-16 Mar 2012, Leura, Australia.

Wang, H. and Kabir, M. M. and Lau, K. T. (2011) The effect of fibre chemical treatments on hemp reinforced composites. In: 18th International Conference on Composite Materials (ICCM-18), 21-26 Aug 2011, Jeju Island, Korea.

hemp fibres

Kabir, Mohammad Mazedul (2012) Effects of chemical treatments on hemp fibre reinforced polyester composites. [Thesis (PhD/Research)] (Unpublished)

hemp oil

Cardona, Francisco (2012) Bio-resins: new structural renewable materials for bio-composite applications. In: 4th KKU International Engineering Conference: Driving Together Towards ASEAN Economic Community (KKU-IENC 2012) , 10-12 May 2012, Khon Kaen University, Thailand.

Cooney, T. I. and Cardona, F. and Tran-Cong, T. (2011) Kinetics of in situ epoxidation of hemp oil under heterogeneous reaction conditions: an overview with preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27-29 Apr 2011, Brisbane, Australia.

hemp oil based bioresin

Manthey, Nathan W. and Cardona, Francisco and Francucci, Gaston M. and Aravinthan, Thiru (2012) Green building materials: hemp oil based biocomposites. In: 2012 World Academy of Science, Engineering and Technology Conference (WASET 2012), 24-25 Oct 2012, Bali, Indonesia.

hemp oil based bioresins

Manthey, Nathan William (2013) Development of hemp oil based bioresins for biocomposites. [Thesis (PhD/Research)] (Unpublished)

hemp thermoset sandwich composites

Kabir, M. M. and Wang, H. and Cardona, F. and Aravinthan, T. (2011) Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

heterogeneous nucleations

Si, Xiaojuan and Guo, Linfeng and Wang, Yimin and Lau, Kin-Tak (2008) Preparation and study of polypropylene/polyethylene terephthalate composite fibres. Composites Science and Technology, 68 (14). pp. 2943-2947. ISSN 0266-3538

heterogeneous reaction

Cooney, T. I. and Cardona, F. and Tran-Cong, T. (2011) Kinetics of in situ epoxidation of hemp oil under heterogeneous reaction conditions: an overview with preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27-29 Apr 2011, Brisbane, Australia.

Heuristic algorithms

Aldraho, Abdelnour and Kist, Alexander A. (2010) Heuristics for dynamic topologies to reduce power consumption of networks. In: ATNAC 2010: Australasian Telecommunication Networks and Applications Conference, 31 Oct-3 Nov 2010, Auckland, New Zealand.

hexagonal core

Banerjee, S. and Battley, M. and Bhattacharyya, D. (2010) Shear strength optimization of reinforced honeycomb core materials. Mechanics of Advanced Materials and Structures, 17 (7). pp. 542-552. ISSN 1537-6494

hexagons

Banerjee, Sourish (2011) Creep response of polymeric honeycombs. In: 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX) , 14-17 Jan 2011, Auckland, New Zealand.

high flexibility

Choy, Y. S. and Liu, Y. and Cheung, H. Y. and Xi, Q. and Lau, K. T. (2012) Development of composite plate for compact silencer design. Journal of Sound and Vibration, 331 (10). pp. 2348-2364. ISSN 0022-460X

high strength concrete

Lokuge, W. P. and Setunge, S. and Sanjayan, J. G. (2011) Stress-strain model for high strength concrete confined by FRP. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

high strength concretes

Lokuge, Weena P. and Sanjayan, J. G. and Setunge, Sujeeva (2005) Stress-strain model for laterally confined concrete. Journal of Materials in Civil Engineering, 17 (6). pp. 607-616. ISSN 0899-1561

Lokuge, Weena and Sanjayan, J. G. and Setunge, Sujeeva (2004) Constitutive model for confined high strength concretes subjected to cyclic loading. Journal of materials in Civil Engineering, 16 (4). pp. 297-305. ISSN 0899-1561

high strength conductive polymers

Lau, Kin-Tak and Cheung, Hoi-Yan and Lu, Jian Ping and Yin, Yan-Sheng and Hui, David and Li, Hu-Lin (2008) Carbon nanotubes for space and bio-engineering applications. Journal of Computational and Theoretical Nanoscience, 5 (1). pp. 23-35. ISSN 1546-1955

high temperature proton exchange membrane

Bose, Saswata and Kuila, Tapas and Nguyen, Thi Xuan Hien and Kim, Nam Hoon and Lau, Kin-tak and Lee, Joong Hee (2011) Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenge. Progress in Polymer Science, 36 (6). pp. 813-843. ISSN 0079-6700

high temperature strength

Zhang, Zuhua and Yang, Tao and Wang, Hao and Yao, Xiao (2013) Inorganic polymer foams: transform from non-structural to structural upon fire. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

high-strength concrete

Hossain, T. and Mendis, P. A. and Aravinthan, Thiru and Baker, Graham (2006) Torsional resistance of high-strength concrete beams. In: 19th Australasian Conference on the Mechanics of Structures and Materials, 29 Nov - 1 Dec 2006, Christchurch, NZ.

high-tensile strength

Chan, Mo-lin and Lau, Kin-tak and Wong, Tsun-tat and Ho, Mei-po and Hui, David (2011) Mechanism of reinforcement in a nanoclay/polymer composite. Composites Part B: Engineering, 42 (6). pp. 1708-1712. ISSN 1359-8368

high-tensile strengths

Choy, Yat-Sze and Lau, Kin-Tak and Wang, C. and Chau, C. W. and Liu, Yang and Hui, David (2009) Composite panels for reducing noise in air conditioning and ventilation systems. Composites Part B: Engineering, 40 (4). pp. 259-266. ISSN 1359-8368

hollow core

Banerjee, S. and Bhattacharyya, D. (2011) Optimal design of sandwich panels made of wood veneer hollow cores. Composites Science and Technology, 71 (4). pp. 425-432. ISSN 0266-3538

hollow FRP piles

Guades, Ernesto and Aravinthan, Thiru and Islam, Mainul and Manalo, Allan (2012) A review on the driving performance of FRP composite piles. Composite Structures, 94 (6). pp. 1932-1942. ISSN 0263-8223

hollow micro-spheres

Islam, Md Mainul and Kim, Ho Sung (2007) Novel syntactic foams made of ceramic hollow micro-spheres and starch: theory, structure and properties. Journal of Materials Science, 42 (15). pp. 6123-6132. ISSN 1573-4803

hollow microsphere

Islam, Md Mainul and Kim, Ho Sung (2011) Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment. Journal of Materials Processing Technology, 211 (4). pp. 708-716. ISSN 0924-0136

Islam, M. M. and Kim, H. S. (2009) An overview on manufacturing and properties of syntactic foams made of ceramic hollow microspheres and starch. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Islam, Md Mainul and Kim, Ho Sung (2008) Manufacture of syntactic foams using starch as binder: post-mold processing. Materials and Manufacturing Processes, 23 (8). pp. 884-892. ISSN 1042-6914

Islam, Md Mainul and Kim, Ho Sung (2008) Pre-mould processing for syntactic foams: modelling, theory and experiment. In: 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME-13), 27-29 May, 2008, Cairo, Egypt.

Islam, Md Mainul and Kim, Ho Sung (2007) Manufacture of syntactic foams: pre-mold processing. Materials and Manufacturing Processes, 22 (1). pp. 28-36. ISSN 1042-6914

Islam, Md Mainul and Kim, Ho Sung (2007) Syntactic foams consolidated with starch: mixing behaviour for post-mould processing. Advanced Materials Research, 29-30. pp. 169-172. ISSN 1022-6680

Islam, Md Mainul and Kim, Ho Sung (2007) Syntactic foams consolidated with starch: modelling for pre-mould processing. Advanced Materials Research, 29-30. pp. 165-168. ISSN 1022-6680

Islam, Md Mainul and Kim, Ho Sung (2006) Syntactic foams consolidated with starch: mixing behaviour for post-mould processing. In: 4th International Conference on Advanced Materials & Processing (ICAMP-4), 10-13 Dec 2006, Hamilton, New Zealand.

Islam, Md Mainul and Kim, Ho Sung (2006) Syntactic foams consolidated with starch: modelling for pre-mould processing. In: 4th International Conference on Advanced Materials & Processing (ICAMP-4), 10-13 Dec 2006, Hamilton, New Zealand.

hollow particles

Salleh, Z. and Islam, M. M. and Ku, H. (2014) Study on compressive properties of syntactic foams for marine applications. Journal of Multifunctional Composites, 2 (1). pp. 21-27.

Salleh, Z. and Islam, M. M. and Ku, H. (2013) Preliminary study on the development of syntactic foams for marine applications. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

hot deformation

Liu, Hui-min and Li, Zhi-peng and Wang, Hao (2013) Effect of in-situ TiC particles on hot deformation behavior of spray formed 7075 Al alloy. Transactions of Materials and Heat Treatment (Cailiao Rechuli Xuebao), 34 (S2). pp. 173-178. ISSN 1009-6264

hot drawing

Chen, Wei and Wang, Hao and Zhang, Lei and Tang, Xiushan (2009) Development of hot drawing process for nitinol tube. International Journal of Modern Physics B, 23 (6/7). pp. 1968-1974. ISSN 0217-9792

hot rolling

Hua, Fuan and Zhang, Chaoyi and Li, Qiang and Yu, Baoyi and Liu, Weihua and Li, Runxia and Xie, Shuisheng and Huang, Guojie and Cheng, Lei and Fu, Yao and Wang, Hao (2011) Numerical simulation of rolling process and microstructure evolution of AM50 Mg alloy during hot rolling process. Advanced Materials Research, 291-29. pp. 449-454. ISSN 1662-8985

hot tear

Easton, Mark A. and Wang, Hao and Grandfield, John and Davidson, Cameron J. and StJohn, David H. and Sweet, Lisa D. and Couper, Malcolm J. (2012) Observation and prediction of the hot tear susceptibility of ternary Al-Si-Mg alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science , 43 (9). pp. 3227-3238. ISSN 1073-5623

hybrid beam

Maranan, G. B. and Manalo, A. C. (2013) Investigation on the mechanical behavior of hybrid fibre reinforced polymer composite beam. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 December 2013, Melbourne, Australia.

hybrid compounds

Guo, Qing Bing and Rong, Min Zhi and Jia, Guo Liang and Lau, Kin-Tak and Zhang, Ming Qiu (2009) Sliding wear performance of nano-SiO2/short carbon fiber/epoxy hybrid composites. Wear, 266 (7-8). pp. 658-665. ISSN 0043-1648

hybrid fiber reinforced polymer

Mutsuyoshi, Hiroshi and Hai, Nguyen Duc and Shiroki, Kensuke and Aravinthan, Thiru and Manalo, Allan (2011) Experimental investigation of HFRP composite beams. In: FRPRCS-10: 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures , 2-4 Apr 2011, Tampa, FL. United States.

hybrid FRP

Manalo, A. C. and Aravinthan, T. and Mutsuyoshi, H. and Matsui, T. (2012) Composite behaviour of a hybrid FRP bridge girder and concrete deck. Advances in Structural Engineering, 15 (4). pp. 589-600. ISSN 1369-4332

hybrid FRP composite

Manalo, Allan and Mutsuyoshi, Hiroshi and Aravinthan, Thiru and Matsui, Takahiro (2009) Behaviour of hybrid FRP composite I-girder with concrete deck. In: FRPRCS-9: Current Challenges and Future Trends, 13-15 July 2009, Sydney, Australia.

hybrid FRP composites

Manalo, Allan and Mutsuyoshi, Hiroshi and Matsui, Takahiro (2012) Testing and characterization of thick hybrid fibre composites laminates. International Journal of Mechanical Sciences , 63 (1). pp. 99-109. ISSN 0020-7403

hybrid girders

Asamoto, S. and Mutsuyoshi, H. and Aravinthan, T. and Suzukawa, K. (2008) Experimental investigation of innovative hybrid composite girders with GFRP and CFRP. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

hybrid materials

Malvern, J. L. and Epaarachchi, J. A. and Lau, K. T. (2011) Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions. In: 18th International Conference on Composite Materials (ICCM-18), 21-26 Aug 2011, Jeju Island, South Korea.

hybrid structure

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2013) Significance analysis of flexural behaviour of hybrid sandwich panels. Open Journal of Civil Engineering, 3 (3B). pp. 1-7. ISSN 2164-3164

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2013) Hybrid sandwich panel with natural fibre composite intermediate layer: Manufacturing process and significance analysis. Malaysian Journal of Civil Engineering, 25 (Special issue 1). pp. 95-111.

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2012) New concept for optimal application of natural fibre reinforced plastic (NFRP) in building construction. In: APSEC-ICCER 2012: Sustaining the World with Better Structures and Construction Practice, 2-4 Oct 2012, Surabaya, Indonesia.

hybrid-III dummy

Thota, Narasimha Murthy and Eepaarachchi, Jayantha A. and Lau, K. T. (2012) Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study. In: 7th Australasian Congress on Applied Mechanics (ACAM 7), 9-12 Dec 2012, Adelaide, Australia.

hydrogen

Yao, X. D. and Wu, C. Z. and Wang, Hao and Cheng, H. M. and Lu, G. Q. (2006) Effects of carbon nanotubes and metal catalysts on hydrogen storage in magnesium nanocomposite. Journal of Nanoscience and Nanotechnology, 6 (2). pp. 494-498. ISSN 1533-4880

hydrogen peroxide

Cooney, T. I. and Cardona, F. and Tran-Cong, T. (2011) Kinetics of in situ epoxidation of hemp oil under heterogeneous reaction conditions: an overview with preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27-29 Apr 2011, Brisbane, Australia.

hydrogen storage

Yao, X. and Wu, C. Z. and Wang, H. and Cheng, H. M. and Lu, G. Q. Max (2005) Hydrogen storage of magnesium-based nanocomposites system. Journal of Materials Science & Technology, 21 (s 1). pp. 57-60. ISSN 1005-0302

hydrophilic properties

Ho, Mei-po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

hydrophilicity

Ho, Mei-po and Wang, Hao and Lau, Kin-tak (2012) Effect of degumming time on silkworm silk fibre for biodegradable polymer composites. Applied Surface Science, 258 (8). pp. 3948-3955. ISSN 0169-4332

hygroscopic behavior

Islam, Md Mainul and Kim, Ho Sung (2012) Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior. Journal of Sandwich Structures and Materials, 14 (1). pp. 111-127. ISSN 1099-6362

hypereutectic aluminium alloy

Wang, Hao (2007) In-situ Si/Al composite produced by semisolid metal processing. Materials and Manufacturing Processes, 22 (5-6). pp. 696-699. ISSN 1042-6914

IBVMS

Islam, Md Mainul and Kim, Ho Sung (2011) Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment. Journal of Materials Processing Technology, 211 (4). pp. 708-716. ISSN 0924-0136

Islam, Md Mainul and Kim, Ho Sung (2008) Pre-mould processing for syntactic foams: modelling, theory and experiment. In: 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME-13), 27-29 May, 2008, Cairo, Egypt.

image monitoring

Ismail, S. B. and Salleh, Z. and Yusop, M. Y.M. and Fakhruradzi, F. H. (2013) Monitoring of barnacle growth on the underwater hull of an FRP boat using image processing. In: 4th International Conference on Computational Systems-Biology and Bioinformatics, CSBio 2013, 7-9 Nov 2013, Seoul; South Korea.

impact

Malvern, J. L. and Epaarachchi, J. A. and Lau, K. T. (2011) Investigation of the impact properties of glass fibre / HMPP fibre hybrid composite materials for civil infrastructure constructions. In: 18th International Conference on Composite Materials (ICCM-18), 21-26 Aug 2011, Jeju Island, South Korea.

impact behavior

He, Yu-xin and Li, Qi and Kuila, Tapas and Kim, Nam Hoon and Jiang, Tongwu and Lau, Kin-tak and Lee, Joong Hee (2013) Micro-crack behavior of carbon fiber reinforced thermoplastic modified epoxy composites for cryogenic applications. Composites Part B: Engineering , 44 (1). pp. 533-539. ISSN 1359-8368

impact behaviour

Guades, Ernesto and Aravinthan, Thiru and Manalo, Allan and Islam, Mainul (2013) Damage modelling of repeatedly impacted square fibre-reinforced polymer composite tube. Materials and Design, 47. pp. 687-697. ISSN 0264-1275

Guades, Ernesto and Aravinthan, Thiru and Manalo, Allan and Islam, Mainul (2013) Experimental investigation on the behaviour of square FRP composite tubes under repeated axial impact. Composite Structures, 97. pp. 211-221. ISSN 0263-8223

Guades, E. J. and Aravinthan, T. and Manalo, A. C. and Islam, M. M. (2013) Effects of energy level and impact repetitions on the impact fatigue behaviour and post-impact flexural properties of square FRP pultruded tubes. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Guades, Ernesto and Aravinthan, Thiru and Islam, Mainul and Manalo, Allan (2012) A review on the driving performance of FRP composite piles. Composite Structures, 94 (6). pp. 1932-1942. ISSN 0263-8223

Guades, E. J. and Aravinthan, T. and Islam, M. M. (2011) Driveability of composite piles. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing (eddBE 2011) , 27-29 Apr 2011, Brisbane, Australia.

impact damage

Guades, Ernesto and Aravinthan, Thiru (2012) Residual properties of square FRP composite tubes subjected to repeated axial impact. Composite Structures. ISSN 0263-8223 (In Press)

impact fatigue

Guades, Ernesto and Aravinthan, Thiru and Manalo, Allan and Islam, Mainul (2013) Experimental investigation on the behaviour of square FRP composite tubes under repeated axial impact. Composite Structures, 97. pp. 211-221. ISSN 0263-8223

impact intensity

Wang, Zhicai and Xu, Cailing and Zhao, Yongqing and Zhao, Dandan and Wang, Zhe and Li, Hulin and Lau, Kin-Tak (2008) Fabrication and mechanical properties of exfoliated clay-CNTs/epoxy nanocomposites. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 490 (1-2). pp. 481-487. ISSN 0921-5093

impact property

Albdiry, M. T. and Ku, H. and Yousif, B. F. (2013) Impact fracture behaviour of silane-treated halloysite nanotubes-reinforced unsaturated polyester. Engineering Failure Analysis, 35. pp. 718-725. ISSN 1350-6307

impact resistance

Ho, Mei-po and Lau, Kin-tak (2012) Design of an impact resistant glass fibre/epoxy composites using short silk fibres. Materials and Design, 35 (1). pp. 664-669. ISSN 0261-3069

impact toughness

Ku, H. and Trada, M. and Cecil, T. and Wong, P. (2010) Tensile tests of phenol formaldehyde glass-powder-reinforced composites: pilot study. Journal of Applied Polymer Science, 116 (1). pp. 10-17. ISSN 0021-8995

impedance

Guades, Ernesto and Aravinthan, Thiru and Islam, Mainul and Manalo, Allan (2012) A review on the driving performance of FRP composite piles. Composite Structures, 94 (6). pp. 1932-1942. ISSN 0263-8223

implants

Wang, Hao and Zhang, M. X. and Shi, Z. M. and Yang, Ke (2006) Biocorrosion behaviour of magnesium alloys under pseudo-physiological conditions. Tissue Engineering, 12 (4). p. 1067. ISSN 1076-3279

in situ scanning electron microscopies

Li, Xiao-Feng and Lau, Kin-Tak and Yin, Yan-Sheng (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology, 68 (14). pp. 2876-2881. ISSN 0266-3538

in-line

Ku, H. and Cardona, F. and Ball, J. and Jacobson, W. and Trada, M. (2008) Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study. Journal of Composite Materials, 42 (19). pp. 2083-2095. ISSN 0021-9983

in-plane

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2011) A comparison of the shear behaviour of a fibre composite sandwich structure in the transverse and in-plane directions. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials , 7-10 Dec 2010, Melbourne, Australia.

in-plane loads

Ma, Xing and Mills, Julie E. and Brown, Graham and Zhuge, Yan (2012) A force method model for static analysis of transmission line system subjected to in-plane and out-of-plane loadings. In: ICTAS 2011: 4th International Conference on Technology of Architecture and Structure, 22-24 Sep 2011, Xi'an, China.

in-plane shear

Zhuge, Y. and Yeap, K. X. (2011) Assessment of debonding failure models for FRP retrofitted URM structures. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials , 7-10 Dec 2010, Melbourne, Australia.

Zhuge, Y. (2010) FRP-retrofitted URM walls under in-plane shear: review and assessment of available models. Journal of Composites for Construction, 14 (6). pp. 743-753. ISSN 1090-0268

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) In-plane shear behaviour of fibre composite sandwich beams using asymmetrical beam shear test. Construction and Building Materials, 24 (10). pp. 1952-1960. ISSN 0950-0618

in-situ aluminium-based composite

Wang, Hao (2007) In-situ Si/Al composite produced by semisolid metal processing. Materials and Manufacturing Processes, 22 (5-6). pp. 696-699. ISSN 1042-6914

in-situ polymerization

Bose, Saswata and Kim, Nam Hoon and Kuila, Tapas and Lau, Kin-tak and Lee, Joong Hee (2011) Electrochemical performance of a graphene–polypyrrole nanocomposite as a supercapacitor electrode. Nanotechnology, 22 (29). p. 5202. ISSN 0957-4484

in-situ TiC particles

Liu, Hui-min and Li, Zhi-peng and Wang, Hao (2013) Effect of in-situ TiC particles on hot deformation behavior of spray formed 7075 Al alloy. Transactions of Materials and Heat Treatment (Cailiao Rechuli Xuebao), 34 (S2). pp. 173-178. ISSN 1009-6264

inclusion

Albdiry, Mushtaq and Alethari, Haydar (2012) Effect of alumina inclusions on microstructure and mechanical properties of 62 WC, 32 (Ti-W) C and 6 Co compacts. International Journal of Microstructure and Materials Properties, 7 (4). pp. 329-340. ISSN 1741-8410

incompressible viscous flow

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2012) Local moving least square-one-dimensional integrated radial basis function networks technique for incompressible viscous flows. International Journal for Numerical Methods in Fluids, 70. pp. 1443-1474. ISSN 0271-2091

indicator

Peauril, J. and Epaarachchi, J. and Lau, K. T. and Wang, H. (2013) Embedded fibre optic sensors under multi-axial loading: a pilot study. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

industrial engineering

Ku, H. (2011) The process of updating production engineering in an Australian regional university excellence in developing e-learning. In: 2011 International MultiConference of Engineers and Computer Scientists (IMECS 2011) , 16-18 Mar 2011, Kowloon, Hong Kong.

industry

Butcher, Peter and Thorpe, David (2007) A review of triple helix linkages in New Zealand earthquake engineering networks and comparison with the Australian cooperative research centre model. In: Triple Helix VI: 6th Biennial International Conference on University, Industry and Government Linkages, 16-18 May 2007, Singapore.

infrastructure

Aravinthan, Thiru and Manalo, Allan (2012) Field applications and case studies of FRP in civil infrastructure: the Australian experience. In: 6th International Conference on FRP Composites in Civil Engineering (CICE 2012) , 13-15 Jun 2012, Rome, Italy.

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2010) A review of current development in natural fiber composites for structural and infrastructure applications. In: Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

initial strains

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

initial values

Bose, Saswata and Kim, Nam Hoon and Kuila, Tapas and Lau, Kin-tak and Lee, Joong Hee (2011) Electrochemical performance of a graphene–polypyrrole nanocomposite as a supercapacitor electrode. Nanotechnology, 22 (29). p. 5202. ISSN 0957-4484

injection moulders

Cheng, Sha and Lau, Kin-Tak and Liu, Tao and Zhao, Yong-Qing and Lam, Pou-Man and Yin, Yansheng (2009) Mechanical and thermal properties of chicken feather fiber/PLA green composites. Composites Part B: Engineering, 40 (7). pp. 650-654. ISSN 1359-8368

injection moulding

Etaati, Amir and Pather, Selvan and Fang, Zhengping and Wang, Hao (2014) The study of fibre/matrix bond strength in short hemp polypropylene composites from dynamic mechanical analysis. Composites Part B: Engineering, 62 (2014). pp. 19-28. ISSN 1359-8368

Etaati, Amir and Mehdizadeh, Saman Abdanan and Wang, Hao and Pather, Selvan (2014) Vibration damping characteristics of short hemp fibre thermoplastic composites. Journal of Reinforced Plastics and Composites, 33 (4). pp. 330-341. ISSN 0731-6844

Etaati, A. and Wang, H. and Pather, S. and Yan, Z. and Mehdizadeh, S. Abdanan (2013) 3D X-ray microtomography study on fibre breakage in noil hemp fibre reinforced polypropylene composites. Composites Part B: Engineering, 50. pp. 239-246. ISSN 1359-8368

Ho, Mei-Po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Mechanical properties of an injected silk fibre reinforced PLA composite. In: 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX), 14-17 Jan 2011, Auckland, New Zealand.

innovation

Thorpe, David and Ryan, Neal and Charles, Michael (2008) Environmental sustainability - a driver for innovation in construction SMEs? In: 3rd International Conference of the CRC for Construction Innovation: Clients Driving Innovation: Benefiting from Innovation, 12-14 March 2008, Gold Coast, Australia.

Van Erp, Gerard and Cattell, Craig and Heldt, Tim (2005) Fibre composite structures in Australia's civil engineering market: an anatomy of innovation. Structural Control and Health Monitoring, 7 (3). pp. 150-160. ISSN 1365-0556

inorganic polymer

Zhang, Zuhua and Yang, Tao and Wang, Hao and Yao, Xiao (2013) Inorganic polymer foams: transform from non-structural to structural upon fire. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

integrated radial basis functions

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2012) Local moving least square-one-dimensional integrated radial basis function networks technique for incompressible viscous flows. International Journal for Numerical Methods in Fluids, 70. pp. 1443-1474. ISSN 0271-2091

integrity

Zhang, Zuhua and Yao, Xiao and Wang, Hao (2012) Potential application of geopolymers as protection coatings for marine concrete III. Field experiment. Applied Clay Science, 67-68. pp. 57-60. ISSN 0169-1317

interaction diagram

Islam, Md Mainul and Aravinthan, Thiru and Williams, Paul Garreth (2012) Behaviour of pultruded FRP hollow sections under eccentric loading. In: 6th International Conference on FRP Composites in Civil Engineering (CICE 2012), 13-15 Jun 2012, Rome, Italy.

interface

Zhu, Huajun and Zhang, Zuhua and Deng, Fenggan and Cao, Yalong (2013) The effects of phase changes on the bonding property of geopolymer to hydrated cement. Construction and Building Materials, 48. pp. 124-130. ISSN 0950-0618

Yu, Bao Yi and Wang, Qing and Li, Qiang and Wu, Yu Juan and Chen, Yan (2013) Interface microstructure and mechanical properties of copper/aluminum composite material. In: 3rd International Conference on Advanced Engineering Materials and Technology (AEMT 2013), 11-12 May 2013, Zhangjiajie, China.

interface bonding

Kabir, Mohammad Mazedul and Wang, Hao and Lau, Alan and Cardona, Francisco and Aravinthan, Thiru (2012) Compressive properties of chemically-treated hemp fibre reinforced composites. In: Composites Australia and CRC-ACS, 2012 Conference: Diversity in Composite, 15-16 Mar 2012, Leura, Australia.

interface bondings

Si, Xiaojuan and Guo, Linfeng and Wang, Yimin and Lau, Kin-Tak (2008) Preparation and study of polypropylene/polyethylene terephthalate composite fibres. Composites Science and Technology, 68 (14). pp. 2943-2947. ISSN 0266-3538

interface temperature

Yousif, B. F. and Alsofyani, I. M. and Yusaf, Talal (2010) Adhesive wear and frictional characteristics of UHMWPE and HDPE sliding against different counterfaces under dry contact condition. Tribology, 4 (2). pp. 78-85. ISSN 1751-5831

interfacial adhesion

Shalwan, A. and Yousif, B. F. (2014) Investigation on interfacial adhesion of date palm/epoxy using fragmentation technique. Materials and Design , 53. pp. 928-937. ISSN 0261-3069

Alsaeed, T. and Yousif, B. F. and Ku, H. (2013) The potential of using date palm fibres as reinforcement for polymeric composites. Materials and Design, 43. pp. 177-184. ISSN 0264-1275

Alsaeed, T. and Alajmi, A. and Yousif, B. F. and Ku, H. and Lau, Alan Kin-tak (2012) Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

Yousif, B. F. and Ku, H. (2012) Suitability of using coir fiber/polymeric composite for the design of liquid storage tanks. Materials and Design, 36. pp. 847-853. ISSN 0264-1275

interfacial shear strength

Wong, K. J. and Yousif, B. F. and Low, K. O. (2010) The effects of alkali treatment on the interfacial adhesion of bamboo fibres. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 224 (3). pp. 139-148. ISSN 1464-4207

intermediate layer

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2011) Flexural strength of sandwich panel with lignocellulosic composites intermediate layer – a statistic approach. International Journal of Protective Structures, 2 (4). pp. 453-464. ISSN 2041-4196

internal friction/damping

Etaati, Amir and Pather, Selvan and Fang, Zhengping and Wang, Hao (2014) The study of fibre/matrix bond strength in short hemp polypropylene composites from dynamic mechanical analysis. Composites Part B: Engineering, 62 (2014). pp. 19-28. ISSN 1359-8368

internal mixing process

Yan, Z. L. and Zhang, J. C. and Lin, G. and Zhang, H. and Ding, Y. and Wang, H. (2013) Fabrication process optimization of hemp fibre-reinforced polypropylene composites. Journal of Reinforced Plastics and Composites, 32 (20). pp. 1504-1512. ISSN 0731-6844

intra-molecular bonding

Ho, Mei-po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

ion exchange resin

Cooney, T. I. and Cardona, F. and Tran-Cong, T. (2011) Kinetics of in situ epoxidation of hemp oil under heterogeneous reaction conditions: an overview with preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27-29 Apr 2011, Brisbane, Australia.

iron aluminide

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

iron aluminides

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

ISI

Xiang, Wei and Pietrobon, Steven S. (2003) On the capacity and normalisation of ISI channels. IEEE Transactions on Information Theory, 49 (9). pp. 2263-2268. ISSN 0018-9448

isothermal conduction calorimetry

Zhang, Zuhua and Provis, John L. and Wang, Hao and Bullen, Frank and Reid, Andrew (2013) Quantitative kinetic and structural analysis of geopolymers part 2. thermodynamics of sodium silicate activation of metakaolin. Thermochimica Acta , 565. pp. 163-171. ISSN 0040-6031

Zhang, Zuhua and Wang, Hao and Provis, John L. and Bullen, Frank and Reid, Andrew and Zhu, Yingcan (2012) Quantitative kinetic and structural analysis of geopolymers, Part 1. The activation of metakaolin with sodium hydroxide. Thermochimica Acta, 539. pp. 23-33. ISSN 0040-6031

isothermal holding

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

Izod

Ho, Mei-Po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Mechanical properties of an injected silk fibre reinforced PLA composite. In: 19th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX), 14-17 Jan 2011, Auckland, New Zealand.

jacket

Manalo, A. C. and Karunasena, W. and Sirimanna, C. and Maranan, G. (2013) Fibre composites pile rehabilitation and concrete formwork jacket - Concept development and finite element analysis. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 December 2013, Melbourne, Australia.

Jarque-Berra test

Dohnal, Ludek and Faigl, Paul (2007) Evaluation of the linearity of calibration dependence. In: Quality assurance of analytical results, 26-28 Mar 2007, (Beskydy), Czech Republic. (Unpublished)

joint

Manalo, A. C. and Karunasena, W. and Sirimanna, C. and Maranan, G. (2013) Fibre composites pile rehabilitation and concrete formwork jacket - Concept development and finite element analysis. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 December 2013, Melbourne, Australia.

Hizam, R. M. and Manalo, A. C. and Karunasena, W. (2013) A review of FRP composite truss systems and its connection. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM22): Materials to Structures: Advancement through Innovation , 11-14 Dec 2012, Sydney, Australia.

joist

Islam, M. M. and Aravinthan, T. (2011) Behaviour of fibre composite sandwich panels under uniformly distributed loading. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Islam, M. M. and Aravinthan, T. and Van Erp, G. (2009) Behaviour of innovative fibre composite sandwich panels under point loading. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009) , 9-11 Dec 2009, Seoul, Korea.

jute

Kabir, Mohammad Mazedul and Islam, Md Mainul and Wang, Hao (2013) Mechanical and thermal properties of jute fibre reinforced composites. Journal of Multifunctional Composites, 1 (1). pp. 71-77. ISSN 2168-4246

Kabir, Mohammad Mazedul and Islam, Md Mainul and Wang, Hao (2010) Mechanical and thermal properties of untreated and chemically treated jute fibre reinforced composites. In: ICMIEE 2010: International Conference on Mechanical, Industrial and Energy Engineering , 23-24 Dec 2010, Khulna, Bangladesh.

kaolin

Zhang, Z. and Wang, H. and Yao, X. and Zhu, Y. (2012) Effects of halloysite in kaolin on the formation and properties of geopolymers. Cement and Concrete Composites, 34 (5). pp. 709-715. ISSN 0958-9465

kenaf fiber

Singh, Narish and Rilling, Dirk and Yousif, B. F. (2010) Kenaf fibers for tribo-thermoplastic composites. In: IMECE 2009: ASME International Mechanical Engineering Congress and Exposition, 13-19 Nov 2009, Lake Buena Vista, FL. United States.

kenaf fibre

Yousif, B. F. and Orupabo, C. and Azwa, Z. N. (2012) Characteristics of kenaf fibre immersed in different solutions. Journal of Natural Fibers, 9 (4). pp. 207-218. ISSN 1544-0478

Singh, Narish and Yousif, B. F. and Rilling, Dirk (2011) Investigations on wear and frictional properties of kenaf fibre polyurethane composites under dry and wet contact conditions. International Journal of Precision Technology, 2 (4). pp. 375-387. ISSN 1755-2060

key parameters

Cheung, Hoi-Yan and Lau, Kin-tak and Tao, Xiao-Ming and Hui, David (2008) A potential material for tissue engineering: silkworm silk/PLA biocomposite. Composites Part B: Engineering, 39 (6). pp. 1026-1033. ISSN 1359-8368

kinetics

Zhang, Zuhua and Provis, John L. and Wang, Hao and Bullen, Frank and Reid, Andrew (2013) Quantitative kinetic and structural analysis of geopolymers part 2. thermodynamics of sodium silicate activation of metakaolin. Thermochimica Acta , 565. pp. 163-171. ISSN 0040-6031

Francucci, Gaston and Cardona, Francisco and Manthey, Nathan W. (2013) Cure kinetics of an acrylated epoxidized hemp oil-based bioresin system. Journal of Applied Polymer Science, 128 (3). pp. 2030-2037. ISSN 0021-8995

Zhang, Zuhua and Wang, Hao and Provis, John L. and Bullen, Frank and Reid, Andrew and Zhu, Yingcan (2012) Quantitative kinetic and structural analysis of geopolymers, Part 1. The activation of metakaolin with sodium hydroxide. Thermochimica Acta, 539. pp. 23-33. ISSN 0040-6031

kinetics (polym.)

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru (2012) Cure kinetic study of epoxidized hemp oil cured with a multiple catalytic system. Journal of Applied Polymer Science, 125 (S2). E511-E517. ISSN 0021-8995

Manthey, Nathan W. and Cardona, Francisco and Aravinthan, Thiru and Cooney, Tyson (2011) Cure kinetics of an epoxidized hemp oil based bioresin system. Journal of Applied Polymer Science, 122 (1). pp. 444-451. ISSN 0021-8995

Lagrange’s Method

Ku, H. and Zhou, Hong and Wong, Peter and Su, Gang and Vadher, Jayent (2012) Modeling the flexural properties of SLG reinforced phenol formaldehyde composites using Langrage’s Method. Advanced Materials Research, 410. pp. 305-308. ISSN 1022-6680

lamb wave

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

laminated glass

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

laminated panels

Awad, Ziad K. and Aravinthan, Thiru and Manalo, Allan (2012) Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending. Materials and Design, 39 (5). pp. 93-103. ISSN 0264-1275

laminated sandwich beams

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2009) Flexural behaviour of laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

Karunasena, W. and Aravinthan, T. and Manalo, A. C. (2009) Vibration of debonded laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

laminated sandwich plates

Karunasena, Warna (2010) The effect of debonding on the natural frequencies of laminated fibre composite sandwich plates. In: 6th Australasian Congress on Applied Mechanics (ACAM 6) , 12-15 Dec 2010, Perth, Western Australia.

Langmuir-Hinshelwood-Hougen-Watson model

Cooney, T. I. and Cardona, F. and Tran-Cong, T. (2011) Kinetics of in situ epoxidation of hemp oil under heterogeneous reaction conditions: an overview with preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27-29 Apr 2011, Brisbane, Australia.

lap shear strength

Ku, H. S. (2008) Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation. Journal of Electromagnetic Waves and Applications, 22 (1). pp. 69-84. ISSN 0920-5071

laser sources

Lam, Pou-Man and Lau, Kin-Tak and Ling, Hang-Yin and Su, Zhong-Qing and Tam, Hwa-Yaw (2009) Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded FBG sensor. Optics and Lasers in Engineering, 47 (10). pp. 1049-1055. ISSN 0143-8166

lattice model

Hossain, T. and Mendis, P. A. and Aravinthan, Thiru and Baker, Graham (2006) Torsional resistance of high-strength concrete beams. In: 19th Australasian Conference on the Mechanics of Structures and Materials, 29 Nov - 1 Dec 2006, Christchurch, NZ.

leaching

Zhang, Zuhua and Wang, Hao and Provis, John L. and Reid, Andrew (2013) Efflorescence: A critical challenge for geopolymer applications? In: Concrete 2013: Understanding Concrete, 16-18 Oct 2013, Gold Coast, Australia.

learning resource

Aravinthan, Thiru (2010) Challenges in the design and delivery of an online postgraduate course in fibre composites. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

least square method

Dohnal, Ludek and Faigl, Paul (2006) Classical or 'robust' linear regression? [Klasická nebo robustní lineární regrese?]. In: 9th Yearly Seminar on Securing Quality of Analytical Results, 27-29 Mar 2006, Komorni Lhotka, Czech Republic.

leg reinforcement

Zhuge, Y. and Mills, J. (2011) Modelling of multi-panel transmission tower retrofitted with leg reinforcement. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

life time prediction

Guades, Ernesto and Aravinthan, Thiru and Manalo, Allan and Islam, Mainul (2013) Damage modelling of repeatedly impacted square fibre-reinforced polymer composite tube. Materials and Design, 47. pp. 687-697. ISSN 0264-1275

light composites

Choy, Y. S. and Liu, Y. and Lau, K. T. (2012) Duct noise control by using very light composite plate. Advanced Materials Research, 410. pp. 361-365. ISSN 1022-6680

light weight

Choy, Y. S. and Liu, Y. and Lau, K. T. (2012) Duct noise control by using very light composite plate. Advanced Materials Research, 410. pp. 361-365. ISSN 1022-6680

Lightweight geopolymer

Chen, Si and Zhuge, Yan and Xu, Deping (2013) Influencing factors and new developments of fly ash based geopolymer. Advanced Materials Research, 831(2014). pp. 62-64. ISSN 1022-6680

lignocellulosic composites

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2011) Flexural strength of sandwich panel with lignocellulosic composites intermediate layer – a statistic approach. International Journal of Protective Structures, 2 (4). pp. 453-464. ISSN 2041-4196

linear programming

Ku, H. and Fulcher, R. (2012) Using computer software packages to enhance the teaching in engineering management science: part 2 - programming techniques. Computer Applications in Engineering Education, 20 ( 1). pp. 114-123. ISSN 1099-0542

linkages

Butcher, Peter and Thorpe, David (2007) A review of triple helix linkages in New Zealand earthquake engineering networks and comparison with the Australian cooperative research centre model. In: Triple Helix VI: 6th Biennial International Conference on University, Industry and Government Linkages, 16-18 May 2007, Singapore.

linseed oil

Ku, H. and Cardona, F. and Rogers, D. and Munoz, J.-C. (2010) Development of polymer network of phenolic and epoxies resins mixed with linseed oil: pilot study. Journal of Materials Engineering and Performance, 19 (6). pp. 912-919. ISSN 1059-9495

Munoz, J.-C. and Ku, H. and Cardona, F. and Rogers, D. (2008) Effects of catalysts and post-curing conditions in the polymer network of epoxy and phenolic resins: preliminary results. Journal of Materials Processing Technology, 202 (1-3). pp. 486-492. ISSN 0924-0136

literature review

Shalwan, A. and Yousif, B. F. (2013) In state of art: mechanical and tribological behaviour of polymeric composites based on natural fibres. Materials and Design, 48. pp. 14-24. ISSN 0264-1275

load

Peauril, J. and Epaarachchi, J. and Lau, K. T. and Wang, H. (2013) Embedded fibre optic sensors under multi-axial loading: a pilot study. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

load transfer lag

Mills, Julie E. and Ma, Xing and Zhuge, Yan (2012) Experimental study on multi-panel retrofitted steel transmission towers. Journal of Constructional Steel Research, 78. pp. 58-67. ISSN 0143-974X

load-deflection relation

Karunasena, Warna (Karu) and Martin, Nicole (2007) The effect of debonding on the flexural behaviour of reinforced concrete beams strengthened with fibre reinforced polymer. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

loading ability

Guo, Qing Bing and Lau, Kin-Tak and Rong, Min Zhi and Zhang, Ming Qiu (2010) Optimization of tribological and mechanical properties of epoxy through hybrid filling. Wear, 269 (1-2). pp. 13-20. ISSN 0043-1648

location detection

Hafizi, Mohd Zohari and Epaarachchi, Jayantha Ananda and Lau, K. T. (2013) Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test. In: 4th Asia-Pacific Workshop on Structural Health Monitoring (APWSHM 2012), 5-7 Dec 2012, Melbourne, Australia.

locking key

Manalo, A. C. and Karunasena, W. and Sirimanna, C. and Maranan, G. (2013) Fibre composites pile rehabilitation and concrete formwork jacket - Concept development and finite element analysis. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 December 2013, Melbourne, Australia.

long-term

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2010) Temperature effects on full scale FRP bridge using innovative composite components. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

longitudinal strength

Ahmed, Mansur and Islam, Md Saiful and Ahsan, Qumrul and Islam, Md Mainul (2013) Silk fibers and their unidirectional polymer composites. In: Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Advances in Materials Science (2). Apple Academic Press, Oakville, ON. Canada , pp. 79-90. ISBN 978-1-926895-16-1

loss modulus

Ku, Harry and Cardona, Francisco and Jamal Eddine, Mustapha (2012) Thermal properties of calcium carbonate powder reinforced vinyl ester composites: pilot study. Journal of Applied Polymer Science . ISSN 0021-8995 (In Press)

Ku, H. and Cardona, F. and Ball, J. and Jacobson, W. and Trada, M. (2008) Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study. Journal of Composite Materials, 42 (19). pp. 2083-2095. ISSN 0021-9983

loss tangent

Ku, H. S. (2008) Contrast joints of glass-fibre with carbon-fibre reinforced low density polyethylene composite bonded by microwave irradiation. Journal of Electromagnetic Waves and Applications, 22 (1). pp. 69-84. ISSN 0920-5071

low densioty polyethylene

Ku, Harry S. and Ball, James A. R. and Siores, Elias and Chan, Peter (1999) Loss tangent for low loss thermoplastic composites. Science and Engineering of Composite Materials, 8 (3). pp. 123-128. ISSN 0792-1233

low density polyethylene

Ku, Harry S. (2006) Productivity improvement of composites processing through the use of industrial microwave technologies. Progress in Electromagnetics Research (PIER), PIER 6. pp. 267-285. ISSN 1559-8985

Ku, Harry S. and MacRobert, Martin and Siores, Elias and Ball, James A. R. (2000) Characterisation of thermoplastic matrix composites (TPC) using variable frequency micorwave (VFM). Plastics, Rubber and Composites, 29 (6). pp. 285-287. ISSN 1465-8011

Ku, Harry S. and MacRobert, Martin and Siores, Elias and Ball, James A. R. (2000) Variable frequency microwave processing of thermoplastic composites. Plastics, Rubber and Composites, 29 (6). pp. 278-284. ISSN 1465-8011

Ku, Harry S. and Siores, Elias and Ball, James A. R. (1999) Microwave facilities for welding thermoplastic composites and preliminary results. Journal of Microwave Power and Electromagnetic Energy, 34 (4). pp. 195-205. ISSN 0832-7823

low loss

Ku, Harry S. and Ball, James A. R. and Siores, Elias and Chan, Peter (1999) Loss tangent for low loss thermoplastic composites. Science and Engineering of Composite Materials, 8 (3). pp. 123-128. ISSN 0792-1233

low temperature pouring

Ning, Zhiliang and Wang, Hao and Sun, Jianfei (2010) Deformation behavior of semisolid A356 alloy prepared by low temperature pouring. Materials and Manufacturing Processes, 25 (7). pp. 648-653. ISSN 1042-6914

low-frequency noise

Choy, Y. S. and Liu, Y. and Cheung, H. Y. and Xi, Q. and Lau, K. T. (2012) Development of composite plate for compact silencer design. Journal of Sound and Vibration, 331 (10). pp. 2348-2364. ISSN 0022-460X

Choy, Y. S. and Liu, Y. and Lau, K. T. (2012) Duct noise control by using very light composite plate. Advanced Materials Research, 410. pp. 361-365. ISSN 1022-6680

lubricant additives

Guo, Qing Bing and Lau, Kin-Tak and Rong, Min Zhi and Zhang, Ming Qiu (2010) Optimization of tribological and mechanical properties of epoxy through hybrid filling. Wear, 269 (1-2). pp. 13-20. ISSN 0043-1648

lubricant oil

Guo, Qing Bing and Lau, Kin-Tak and Rong, Min Zhi and Zhang, Ming Qiu (2010) Optimization of tribological and mechanical properties of epoxy through hybrid filling. Wear, 269 (1-2). pp. 13-20. ISSN 0043-1648

lubricating oils

Guo, Qing Bing and Lau, Kin-Tak and Zheng, Bing Fa and Rong, Min Zhi and Zhang, Ming Qiu (2009) Imparting ultra-low friction and wear rate to epoxy by the incorporation of microencapsulated lubricant? Macromolecular Materials and Engineering, 294 (1). pp. 20-24. ISSN 1438-7492

M2S2

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2008) M2S2 modular deployable shelter system: concept and analysis technique. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

machine

Yousif, B. F. (2012) Design of newly fabricated tribological machine for wear and frictional experiments under dry/wet condition. Materials and Design. ISSN 0261-3069 (In Press)

magnesium

Wang, Hao and Zhang, M. X. and Shi, Z. M. and Yang, Ke (2006) Biocorrosion behaviour of magnesium alloys under pseudo-physiological conditions. Tissue Engineering, 12 (4). p. 1067. ISSN 1076-3279

Yao, X. D. and Wu, C. Z. and Wang, Hao and Cheng, H. M. and Lu, G. Q. (2006) Effects of carbon nanotubes and metal catalysts on hydrogen storage in magnesium nanocomposite. Journal of Nanoscience and Nanotechnology, 6 (2). pp. 494-498. ISSN 1533-4880

Yao, X. and Wu, C. Z. and Wang, H. and Cheng, H. M. and Lu, G. Q. Max (2005) Hydrogen storage of magnesium-based nanocomposites system. Journal of Materials Science & Technology, 21 (s 1). pp. 57-60. ISSN 1005-0302

magnesium alloy

Wang, Hao and Ning, Zhiliang (2007) Magnesium thixotropic structure produced by controlled nucleation method. Tezhong Zhuzao Ji Youse Hejin (Special Casting and Nonferrous Alloys) (Sp. Is). pp. 316-319. ISSN 1001-2249

magnesium alloys

Wang, Hao and Ning, Zhiliang and Liang, W. Z. and Cao, Fuyang and Sun, Jianfei (2009) Microstructure and properties of Mg-Nd-Zn-Zr alloys. In: 4th International Light Metals Technology Biennial Conference (LMT2009), 29 June - 1 July 2009, Gold Coast, Australia.

Wang, H. and Shi, Z. M. and Yang, K. (2008) Magnesium and magnesium alloys as degradable metallic biomaterials. In: FMST 2008: 4th International Conference on Frontiers in Materials Science and Technology, 26-28 Mar 2008, Brisbane, Australia.

Wang, H. and Estrin, Y. and Fu, H. M. and Song, G. L. and Zuberova, Z. (2007) The effect of pre-processing and grain structure on the bio-corrosion and fatigue resistance of magnesium alloy AZ31. Advanced Engineering Materials, 9 (11). pp. 967-972. ISSN 1438-1656

magnesium oxide board

Manalo, Allan (2013) Structural behaviour of a prefabricated composite wall system made from rigid polyurethane foam and magnesium oxide board. Construction and Building Materials, 41. pp. 642-653. ISSN 0950-0618

management

Ross, Pauline and McGowan, Carol G. and Styger, Lee E. J. (2012) A comparison of theory and practice in market intelligence gathering for Australian micro-businesses and SMEs. In: 19th International Business Research Conference, 19-21 Nov 2012, Melbourne, Australia .

management science

Ku, Harry S. (2012) Review on using packages to enhance the teaching of critical path networks. In: 2012 International MultiConference of Engineers and Computer Scientists (IMECS 2012), 14-16 Mar 2012, Hong Kong, China.

manufacture

Islam, Md Mainul and Kim, Ho Sung (2012) Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior. Journal of Sandwich Structures and Materials, 14 (1). pp. 111-127. ISSN 1099-6362

Islam, Md Mainul and Kim, Ho Sung (2011) Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment. Journal of Materials Processing Technology, 211 (4). pp. 708-716. ISSN 0924-0136

Islam, Md Mainul and Kim, Ho Sung (2010) Manufacturing and behaviour of sandwich composites made of starch as binder for core and adhesive between core and skins. In: 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010), 24-26 Sept 2010, Kottayam, Kerala, India.

Islam, Md Mainul and Kim, Ho Sung (2008) Manufacture of syntactic foams using starch as binder: post-mold processing. Materials and Manufacturing Processes, 23 (8). pp. 884-892. ISSN 1042-6914

Islam, Md Mainul and Kim, Ho Sung (2008) Pre-mould processing for syntactic foams: modelling, theory and experiment. In: 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME-13), 27-29 May, 2008, Cairo, Egypt.

Islam, Md Mainul and Kim, Ho Sung (2007) Properties and mechanical behaviour of novel sandwich composites made of syntactic foam and paper skin. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

manufacturing

Islam, Md Mainul and Kim, Ho Sung and Kabir, Mohammad Mazedul (2010) An overview on syntactic foam core and paper skin sandwich composites as potential building materials. In: 2010 International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2010), 23-24 Dec 2010, Khulna, Bangladesh.

Omar, T. and Aravinthan, T. (2009) Design and development of a fibre composite windmill structure. Australian Journal of Structural Engineering, 10 (1). pp. 25-36. ISSN 1328-7982

Islam, Md Mainul and Kim, Ho Sung (2007) Manufacture of syntactic foams: pre-mold processing. Materials and Manufacturing Processes, 22 (1). pp. 28-36. ISSN 1042-6914

Islam, Md Mainul and Kim, Ho Sung (2007) Syntactic foams consolidated with starch: mixing behaviour for post-mould processing. Advanced Materials Research, 29-30. pp. 169-172. ISSN 1022-6680

Islam, Md Mainul and Kim, Ho Sung (2006) Syntactic foams consolidated with starch: modelling for pre-mould processing. In: 4th International Conference on Advanced Materials & Processing (ICAMP-4), 10-13 Dec 2006, Hamilton, New Zealand.

manufacturing process

Ho, Mei-po and Wang, Hao and Lee, Joong-Hee and Ho, Chun-kit and Lau, Kin-tak and Leng, Jinsong and Hui, David (2012) Critical factors on manufacturing processes of natural fibre composites. Composites Part B: Engineering, 43 (8). pp. 3549-3562. ISSN 1359-8368

Islam, M. M. and Kim, H. S. (2009) An overview on manufacturing and properties of syntactic foams made of ceramic hollow microspheres and starch. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

manufacturing processes

Ho, Mei-Po (2012) Strengthening mechanism and bio-degradability of a silk-based polymer composite. [Thesis (PhD/Research)] (Unpublished)

MAPP

Ahmed, Mansur and Islam, Md Saiful and Ahsan, Qumrul and Islam, Md Mainul (2011) Fabrication and characterization of unidirectional silk fibre composites. In: ICCST8: 8th International Conference on Composite Science and Technology, 22-24 Mar 2011, Kuala Lumpur, Malaysia.

marine concrete

Zhang, Zuhua and Yao, Xiao and Wang, Hao (2012) Potential application of geopolymers as protection coatings for marine concrete III. Field experiment. Applied Clay Science, 67-68. pp. 57-60. ISSN 0169-1317

marine engineering materials

Lau, Kin-Tak (2010) Recent research trend in marine engineering materials (Keynote lecture). In: 160th Eastern Forum of Sciences and Technology , 20-21 Sep 2011, Shanghai, China. (Unpublished)

marine structures

Van Erp, Gerard and Cattell, Craig and Heldt, Tim (2005) Fibre composite structures in Australia's civil engineering market: an anatomy of innovation. Structural Control and Health Monitoring, 7 (3). pp. 150-160. ISSN 1365-0556

market intelligence

Ross, Pauline and McGowan, Carol G. and Styger, Lee E. J. (2012) A comparison of theory and practice in market intelligence gathering for Australian micro-businesses and SMEs. In: 19th International Business Research Conference, 19-21 Nov 2012, Melbourne, Australia .

marketing data analysis

Ross, Pauline and McGowan, Carol G. and Styger, Lee E. J. (2012) A comparison of theory and practice in market intelligence gathering for Australian micro-businesses and SMEs. In: 19th International Business Research Conference, 19-21 Nov 2012, Melbourne, Australia .

masonry

Zhuge, Yan and Yeap, Kai (2009) Debonding characteristics of masonry structures retrofitted with FRP. In: 17th Annual International Conference on Composites or Nano Engineering ICCE17, 26 Jul-1 Aug 2009, Honolulu, Hawaii, USA.

materail processing

Ku, Harry S. and MacRobert, Martin and Siores, Elias and Ball, James A. R. (2000) Characterisation of thermoplastic matrix composites (TPC) using variable frequency micorwave (VFM). Plastics, Rubber and Composites, 29 (6). pp. 285-287. ISSN 1465-8011

material composition

Hussin, Manal (2012) An investigation into the effect of material composition on the fundamental properties of permeable concrete. [Thesis (PhD/Research)] (Unpublished)

material properties

Lokuge, Weena and Aravinthan, Thiru (2013) Effect of fly ash on the behaviour of polymer concrete with different types of resin. Materials and Design, 51. pp. 175-181. ISSN 0264-1275

Sirimanna, Chamila Sampath and Lokuge, Weena and Islam, Md Mainul and Aravinthan, Thiru (2012) Compressive strength characterization of polyester based fillers. In: PFAM 20: 20th International Symposium on Processing and Fabrication of Advanced Materials, 15-18 Dec 2011, Hong Kong.

Lokuge, Weena and Aravinthan, Thiru and Sirimanna, Chamila Sampath and Islam, Mainul (2011) Influence of fly ash proportions on properties of polymer cconcrete with polyester resin. In: Concrete 2011: Building a Sustainable Future, 12-14 Oct 2011, Perth, Western Australia.

Materials science

Wang, Hao and Zou, Jin and Zhang, M. X., eds. (2004) Advanced materials science and engineering: 2004 Australia-China Materials Science Symposium, 22nd-25th October 2004, Brisbane, Australia: [special theme issue of] Journal of Materials Science & Technology, Vol. 20, Suppl. 1, 2004. Zhongguo Kexueyuan, Jinshu Yanjiusuo, China. ISBN 1005-0302

mathematical model

Etaati, Amir and Dehghani, Kamran and Ebrahimi, G. R. and Wang, Hao (2013) Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations. Metals and Materials International, 19 (1). pp. 5-9. ISSN 1598-9623

mathematical modeling

Ku, H. and Zhou, Hong and Wong, Peter and Su, Gang and Vadher, Jayent (2012) Modeling the flexural properties of SLG reinforced phenol formaldehyde composites using Langrage’s Method. Advanced Materials Research, 410. pp. 305-308. ISSN 1022-6680

Epaarachchi, J. and Ku, H. and Gohel, K. (2010) A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites. Journal of Composite Materials, 44 (6). pp. 779-788. ISSN 0021-9983

Ku, H. and Xiang, W. and Pattarachaiyakoop, N. (2009) Mathematical modeling of the fracture toughness of phenol formaldehyde composites reinforced with E-spheres. In: 2nd International Conference on Multi-functional Materials and Structures, 9-12 Oct 2009, Qingdao, China.

matrix

Cheng, Sha and Lau, Kin-Tak and Liu, Tao and Zhao, Yong-Qing and Lam, Pou-Man and Yin, Yansheng (2009) Mechanical and thermal properties of chicken feather fiber/PLA green composites. Composites Part B: Engineering, 40 (7). pp. 650-654. ISSN 1359-8368

matrix materials

Epaarachchi, J. and Ku, H. and Gohel, K. (2010) A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites. Journal of Composite Materials, 44 (6). pp. 779-788. ISSN 0021-9983

maximum flexural strain

Ku, H. and Fung, S. Y. and Islam, M. and Li, X. and Chong, Y. P. (2013) A pilot study on flexural properties of epoxy nanoclay reinforced composites. Journal of Reinforced Plastics and Composites, 32 (2). pp. 96-104. ISSN 0731-6844

Ku, H. and Wong, P. (2012) Contrast on tensile and flexural properties of glass powder reinforced epoxy composites: pilot study. Journal of Applied Polymer Science, 123 (1). pp. 152-161. ISSN 0021-8995

Ku, H. S. (2011) Relationship between different mechanical properties of phenol formaldehyde SLG-reinforced composites. Journal of Reinforced Plastics and Composites, 30 (15). pp. 1281-1292. ISSN 0731-6844

mechanical

Shalwan, A. and Yousif, B. F. (2013) In state of art: mechanical and tribological behaviour of polymeric composites based on natural fibres. Materials and Design, 48. pp. 14-24. ISSN 0264-1275

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan and Manalo, Allan (2013) Geometry and restraint effects on the bending behaviour of the glass fibre reinforced polymer sandwich slabs under point load. Materials and Design, 45. pp. 125-134. ISSN 0264-1275

Nirmal, Umar and Hashim, Jamil and Lau, Saijod T. W. and Yuhazri, M. Y. and Yousif, B. F. (2012) Betelnut fibres as an alternative to glass fibres to reinforce thermoset composites: a comparative study. Textile Research Journal, 82 (11). pp. 1107-1120. ISSN 0040-5175

Kabir, Mohammad Mazedul and Islam, Md Mainul and Wang, Hao (2010) Mechanical and thermal properties of untreated and chemically treated jute fibre reinforced composites. In: ICMIEE 2010: International Conference on Mechanical, Industrial and Energy Engineering , 23-24 Dec 2010, Khulna, Bangladesh.

mechanical anchorage

Pandey, G. R. and Mutsuyoshi, H. and Aravinthan, T. (2007) Retrofitting reinforced concrete bridge frames using externally bonded FRP sheets. In: 1st Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 Dec 2007, Hong Kong, China.

mechanical and thermal properties

Cheng, Sha and Lau, Kin-Tak and Liu, Tao and Zhao, Yong-Qing and Lam, Pou-Man and Yin, Yansheng (2009) Mechanical and thermal properties of chicken feather fiber/PLA green composites. Composites Part B: Engineering, 40 (7). pp. 650-654. ISSN 1359-8368

Cheung, Hoi-Yan and Lau, Kin-tak and Tao, Xiao-Ming and Hui, David (2008) A potential material for tissue engineering: silkworm silk/PLA biocomposite. Composites Part B: Engineering, 39 (6). pp. 1026-1033. ISSN 1359-8368

mechanical behavior

Manalo, A. C. and Mutsuyoshi, H. and Asamoto, S. and Aravinthan, T. and Matsui, T. (2009) Mechanical behavior of hybrid FRP composites with bolted joints. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

mechanical behaviour

Manalo, A. C. and Mutsuyoshi, H. and Asamoto, S. and Aravinthan, T. and Matsui, T. (2009) Mechanical behavior of hybrid FRP composites with bolted joints. In: ACMSM 20: Futures in Mechanics of Structures and Materials , 2-5 Dec 2008, Toowoomba, Australia.

mechanical characterization

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2012) Mechanical properties characterization of the skin and core of a novel composite sandwich structure. Journal of Composite Materials. ISSN 0021-9983 (In Press)

mechanical joints

Manalo, Allan and Mutsuyoshi, Hiroshi (2012) Behavior of fiber-reinforced composite beams with mechanical joints. Journal of Composite Materials, 46 (4). pp. 483-496. ISSN 0021-9983

mechanical loss

Cheng, Sha and Lau, Kin-Tak and Liu, Tao and Zhao, Yong-Qing and Lam, Pou-Man and Yin, Yansheng (2009) Mechanical and thermal properties of chicken feather fiber/PLA green composites. Composites Part B: Engineering, 40 (7). pp. 650-654. ISSN 1359-8368

mechanical loss tangent

Ku, H. and Trada, M. and Tai, P. (2013) Dielectric properties of sawdust reinforced epoxy composites post-cured in microwaves. Journal of Reinforced Plastics and Composites, 32 (10). pp. 765-774. ISSN 0731-6844

Ku, H. and Wong, P. and Maxwell, A. and Huang, J. and Fung, H. and Mohan, T. (2011) A pilot study on the relationship between mechanical and electrical loss tangents of glass powder reinforced epoxy composites post-cured in microwaves. In: ICKEM 2011: 1st International Conference on Key Engineering Materials, 25-27 Mar 2011, Sanya, China.

Ku, H. and Cardona, F. and Ball, J. and Jacobson, W. and Trada, M. (2008) Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study. Journal of Composite Materials, 42 (19). pp. 2083-2095. ISSN 0021-9983

mechanical losses

Ku, H. and Cardona, F. and Ball, J. and Jacobson, W. and Trada, M. (2008) Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study. Journal of Composite Materials, 42 (19). pp. 2083-2095. ISSN 0021-9983

mechanical properties

Bajracharya, Rohan Muni and Manalo, Allan C. and Karunasena, Warna and Lau, Kin-tak (2014) An overview of mechanical properties and durability of glass-fibre reinforced recycled mixed plastic waste composites. Materials and Design, 62. pp. 98-112. ISSN 0264-1275

Francucci, G. and Manthey, N. W. and Cardona, F. and Aravinthan, T. (2014) Processing and characterization of 100% hemp-based biocomposites obtained by vacuum infusion. Journal of Composite Materials , 48 (11). pp. 1323-1335. ISSN 0021-9983

Salleh, Zulzamri and Islam, Md Mainul and Yusop, M. Y. M. and Muhamad, M. S. (2013) Tensile behaviours of activated carbon (AC) coconut shell reinforced recycle polyethylene (PET) hybrid composites. In: 12th International Conference on Frontiers of Polymers and Advanced Materials (ICFPAM 2013), 8-13 Dec 2013, Auckland, New Zealand.

Lokuge, Weena and Aravinthan, Thiru (2013) Comparative assessment of polymer concrete with different types of resin. In: Concrete 2013: Understanding Concrete , 16-18 Oct 2013, Gold Coast, Australia.

Yan, Z. L. and Zhang, J. C. and Lin, G. and Zhang, H. and Ding, Y. and Wang, H. (2013) Fabrication process optimization of hemp fibre-reinforced polypropylene composites. Journal of Reinforced Plastics and Composites, 32 (20). pp. 1504-1512. ISSN 0731-6844

Manthey, Nathan W. and Cardona, Francisco and Francucci, Gaston and Aravinthan, Thiru (2013) Thermo-mechanical properties of epoxidized hemp oil-based bioresins and biocomposites. Journal of Reinforced Plastics and Composites , 32 (19). pp. 1444-1456. ISSN 0731-6844

Misnon, M. I. and Bahari, S. A. and Islam, M. M. and Epaarachchi, J. A. (2013) Integration of textile fabric and coconut shell in particleboard. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Etaati, A. and Wang, H. and Pather, S. and Yan, Z. and Mehdizadeh, S. Abdanan (2013) 3D X-ray microtomography study on fibre breakage in noil hemp fibre reinforced polypropylene composites. Composites Part B: Engineering, 50. pp. 239-246. ISSN 1359-8368

Ku, H. and Epaarachchi, J. and Trada, M. and Wong, P. (2013) Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves. Journal of Reinforced Plastics and Composites, 32 (10). pp. 689-699. ISSN 0731-6844

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2013) A review on the characteristics of gomuti fibre and its composites with thermoset resins. Journal of Reinforced Plastics and Composites, 32 (2). pp. 124-136. ISSN 0731-6844

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2013) Properties and behaviour of gomuti fibre composites under tensile and compressive load. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Yan, Z. L. and Wang, H. and Lau, K. T. and Pather, S. and Zhang, J. C. and Lin, G. and Ding, Y. (2013) Reinforcement of polypropylene with hemp fibres. Composites Part B: Engineering , 46. pp. 221-226. ISSN 1359-8368

Ku, H. and Yap, Y. S. and Lee, T. S. and Trada, M. (2012) Tensile properties of phenol-formaldehyde nanoclay reinforced composites: a pilot study. Journal of Applied Polymer Science, 126 (s2). E142-E150. ISSN 0021-8995

Yan, Z. L. and Wang, H. and Lau, K. T. and Zhang, J. C. and Zhang, H. and Ding, Y. (2012) Fabrication process optimization of hemp fibre reinforced polypropylene composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. (2012) Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview. Composites Part B: Engineering, 43 (7). pp. 2883-2892. ISSN 1359-8368

Manthey, Nathan W. and Cardona, Francisco and Francucci, Gaston M. and Aravinthan, Thiru (2012) Green building materials: hemp oil based biocomposites. In: 2012 World Academy of Science, Engineering and Technology Conference (WASET 2012), 24-25 Oct 2012, Bali, Indonesia.

Ho, Mei-po and Wang, Hao and Lau, Kin-tak and Lee, Joong-hee and Hui, David (2012) Interfacial bonding and degumming effects on silk fibre/polymer biocomposites. Composites Part B: Engineering, 43 (7). pp. 2801-2812. ISSN 1359-8368

Yousif, B. F. and Shalwan, A. and Chin, C. W. and Ming, K. C. (2012) Flexural properties of treated and untreated kenaf/epoxy composites. Materials and Design, 40. pp. 378-385. ISSN 0264-1275

Alsaeed, T. and Alajmi, A. and Yousif, B. F. and Ku, H. and Lau, Alan Kin-tak (2012) Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

Kabir, M. M. and Wang, H. and Lau, K. T. and Cardona, F. and Aravinthan, T. (2012) Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites. Composites Part B: Engineering, 43 (2). pp. 159-169. ISSN 1359-8368

Ho, Mei-Po (2012) Strengthening mechanism and bio-degradability of a silk-based polymer composite. [Thesis (PhD/Research)] (Unpublished)

Albdiry, M. T. and Yousif, B. F. and Ku, H. and Lau, K. T. (2012) A critical review on the manufacturing processes in relation to the properties of nanoclay/polymer composites. Journal of Composite Materials. ISSN 0021-9983 (In Press)

Lau, Mei-Ling and Lau, Kin-Tak and Ku, Harry and Bahattacharyya, Debes and Yao, Yan-Dong (2012) Measurements of heat treatment effects on bovine cortical bones by nanoindentation and compression testing. Journal of Biomaterials and Nanobiotechnology, 3 (1). pp. 105-113. ISSN 2158-7027

Ho, M. P. and Wang, H. and Lau, K. T. and Jayaraman, K. and Bhattacharyya, D. (2012) Mechanical properties of a bamboo charcoal reinforced polylactic acid composite. In: 8th Asian-Australasian Conference on Composite Materials: Enabling Tomorrow's Industry Toda (ACCM 8), 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Tarawneh, Mou’ad A. and Ahmad, Sahrim Hj. and EhNoum, SeYong and Lau, Kin-tak (2012) Sonication effect on the mechanical properties of MWCNTs reinforced natural rubber. Journal of Composite Materials. ISSN 0021-9983 (In Press)

Dong, Yu and Chaudhary, Deeptangshu and Ploumis, Charlie and Lau, Kin-tak (2011) Correlation of mechanical performance and morphological structures of epoxy micro/nanoparticulate composites. Composites Part A: Applied Science and Manufacturing , 42 (10). pp. 1483-1492. ISSN 1359-835X

Ku, H. and Wang, H. and Pattarachaiyakoop, N. and Trada, M. (2011) A review on the tensile properties of natural fiber reinforced polymer composites. Composites Part B: Engineering, 42 (4). pp. 856-873. ISSN 1359-8368

Manthey, N. W. and Cardona, F. and Aravinthan, T. (2011) Mechanical properties of epoxidized hemp oil based biocomposites: preliminary results. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, 27 -29 Apr 2011, Brisbane, Australia.

Ho, Mei-po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

Zhao, Yong-Qing and Lau, Kin-Tak and Kim, Jang-Kyo and Xu, Cai-Ling and Zhao, Dan-Dan and Li, Hu-Lin (2010) Nanodiamond/poly (lactic acid) nanocomposites: effect of nanodiamond on structure and properties of poly (lactic acid). Composites Part B: Engineering, 41 (8). pp. 646-653. ISSN 1359-8368

Yousif, B. F. and El-Tayeb, N. S. M. (2010) Wear characteristics of thermoset composite under high stress three-body abrasive. Tribology International, 43 (12). pp. 2365-2371. ISSN 0301-679X

Yousif, B. F. (2010) Effect of oil palm fibres volume fraction on mechanical properties of polyester composites. International Journal of Modern Physics B, 24 (23). pp. 4459-4470. ISSN 0217-9792

Cheung, Hoi-Yan and Lau, Kin-Tak and Pow, Yu-Fung and Zhao, Yong-Qing and Hui, David (2010) Biodegradation of a silkworm silk/PLA composite. Composites Part B: Engineering, 41 (3). pp. 223-228. ISSN 1359-8368

Ku, H. and Trada, M. and Cecil, T. and Wong, P. (2010) Tensile tests of phenol formaldehyde glass-powder-reinforced composites: pilot study. Journal of Applied Polymer Science, 116 (1). pp. 10-17. ISSN 0021-8995

Cheung, Hoi-Yan and Ho, Mei-Po and Lau, Kin-Tak and Cardona, Francisco and Hui, David (2009) Natural fibre-reinforced composites for bioengineering and environmental engineering. Composites Part B: Engineering, 40 (7). pp. 655-663. ISSN 1359-8368

Cheung, Hoi-Yan and Ho, Mei-po and Lau, Kin-tak and Mosallam, Ayman (2009) Study on the mechanical properties of different silkworm silk fibers. Journal of Composite Materials, 43 (22). pp. 2521-2531. ISSN 0021-9983

Si, Xiaojuan and Guo, Linfeng and Wang, Yimin and Lau, Kin-Tak (2008) Preparation and study of polypropylene/polyethylene terephthalate composite fibres. Composites Science and Technology, 68 (14). pp. 2943-2947. ISSN 0266-3538

Faigl, Pavel and Rogers, David and Maurin, Romain and Van Erp, Gerard (2007) Plant based resins for fibre composites. In: 4th Annual Composites Australia and Composites CRC Conference (CRC 2007): New Technology Taking Shape, 19-20 Apr 2007, Gold Coast, Australia.

Epaarachchi, Jayantha A. and Clegg, Richard (2006) An experimental investigation of the properties of cross-ply laminate used for manufacturing of small aircraft components. Composite Structures, 75 (1-4). pp. 93-99. ISSN 0263-8223

Liu, Weili and Zhang, H. F. and Hu, Z. Q. and Wang, Hao (2005) Formation and mechanical properties of Mg65Cu25Er10 and Mg65Cu15Ag10Er10 bulk amorphous alloys. Journal of Alloys and Compounds, 397 (1-2). pp. 202-206. ISSN 0925-8388

Wang, Hao (2005) Bulk metallic glass composites. Journal of Materials Science and Technology, 21 (s1). pp. 86-90. ISSN 1005-0302

mechanical property

Shamsuddoha, Md and Islam, Md Mainul and Aravinthan, Thiru and Manalo, Allan and Lau, Kin-tak (2013) Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines. Materials and Design, 52. pp. 315-327. ISSN 0264-1275

Zhu, Yue-Feng and Shi, Lei and Liang, Ji and Hui, David and Lau, Kin-Tak (2008) Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics. Composites Part B: Engineering, 39 (7-8). pp. 1136-1141. ISSN 1359-8368

mechanical stirrings

Li, Xiao-Feng and Lau, Kin-Tak and Yin, Yan-Sheng (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology, 68 (14). pp. 2876-2881. ISSN 0266-3538

mechanical testing

Ku, H. and Wang, H. and Pattarachaiyakoop, N. and Trada, M. (2011) A review on the tensile properties of natural fiber reinforced polymer composites. Composites Part B: Engineering, 42 (4). pp. 856-873. ISSN 1359-8368

medical applications

Ho, Mei-po and Wang, Hao and Lau, Kin-tak (2012) Thermal properties and structure conformation on silkworm silk fibre. In: Composites Australia and CRC-ACS, 2012 Conference: Diversity in Composite, 15-16 Mar 2012, Leura, Australia.

member capacity

Suntharavadivel, Thuraichamy Guganesan and Aravinthan, Thiru (2007) Analytical studies on externally post tensioned concrete girders with existing shear cracks. In: 23rd Biennial Conference of the Concrete Institute of Australia: Concrete for Future, 18-20 October 2007, Adelaide, Australia.

membrane

Mishra, Ananta Kumar and Bae, Seon-Hyeong and Kim, Nam Hoon and Lau, Kin-tak and Lee, Joong Hee (2012) Nafion-peptized laponite clay nanocomposite membrane for PEMFC. In: 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM 20), 15-18 Dec 2011, Hong Kong.

mentoring

Manalo, Allan and Aravinthan, Thiru (2012) Peer assisted learning in an online postgraduate course on engineered fibre composites. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

metakaolin

Zhang, Zuhua and Wang, Hao and Provis, John L. and Bullen, Frank and Reid, Andrew and Zhu, Yingcan (2012) Quantitative kinetic and structural analysis of geopolymers, Part 1. The activation of metakaolin with sodium hydroxide. Thermochimica Acta, 539. pp. 23-33. ISSN 0040-6031

metal catalysts

Yao, X. D. and Wu, C. Z. and Wang, Hao and Cheng, H. M. and Lu, G. Q. (2006) Effects of carbon nanotubes and metal catalysts on hydrogen storage in magnesium nanocomposite. Journal of Nanoscience and Nanotechnology, 6 (2). pp. 494-498. ISSN 1533-4880

metal cutting industry

Ku, Harry S. and Chia, Wee Chong (2006) Design of multi-purpose carbide end mill. Institution of Engineers, Malaysia. Journal, 67 (2). pp. 34-40. ISSN 0126-513X

metallic

Wang, Hao and Zhang, H. F. and Hu, Z. Q. (2007) Tungsten fibre reinforced Zr-based bulk metallic glass composites. Materials and Manufacturing Processes, 22 (5-6). pp. 687-691. ISSN 1042-6914

metallic composites

Chen, Wei and Wang, Hao and Zhang, Lei and Tang, Xiushan (2009) Development of hot drawing process for nitinol tube. International Journal of Modern Physics B, 23 (6/7). pp. 1968-1974. ISSN 0217-9792

metallic glasses

Wang, Hao (2005) Bulk metallic glass composites. Journal of Materials Science and Technology, 21 (s1). pp. 86-90. ISSN 1005-0302

metallic material

Lau, Kin-tak and Ho, Mei-po and Au-Yeung, Chi-ting and Cheung, Hoi-yan (2010) Biocomposites: their multifunctionality. International Journal of Smart and Nano Materials, 1 (1). pp. 13-27. ISSN 1947-5411

method comparison

Dohnal, Ludek and Faigl, Paul (2006) Classical or 'robust' linear regression? [Klasická nebo robustní lineární regrese?]. In: 9th Yearly Seminar on Securing Quality of Analytical Results, 27-29 Mar 2006, Komorni Lhotka, Czech Republic.

metrology

Ku, H. (2011) The process of updating production engineering in an Australian regional university excellence in developing e-learning. In: 2011 International MultiConference of Engineers and Computer Scientists (IMECS 2011) , 16-18 Mar 2011, Kowloon, Hong Kong.

Mg alloys

Liu, Weili and Zhang, H. F. and Hu, Z. Q. and Wang, Hao (2005) Formation and mechanical properties of Mg65Cu25Er10 and Mg65Cu15Ag10Er10 bulk amorphous alloys. Journal of Alloys and Compounds, 397 (1-2). pp. 202-206. ISSN 0925-8388

Mg matrix

Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275

Mg-base alloy

Liu, W. Y. and Zhang, H. F. and Hu, Z. Q. and Wang, H. and Yao, X. D. (2005) Fabrication of bulk amorphous Mg65Cu25Gd10 alloy of 12mm rod by water quenching. In: Magnesium – Science, Technology and Applications. Trans Tech Publications Inc., Zurich, Switzerland, pp. 211-214. ISBN 978-087849968-7

Mg65Cu25Gd10

Liu, W. Y. and Zhang, H. F. and Hu, Z. Q. and Wang, H. and Yao, X. D. (2005) Fabrication of bulk amorphous Mg65Cu25Gd10 alloy of 12mm rod by water quenching. In: Magnesium – Science, Technology and Applications. Trans Tech Publications Inc., Zurich, Switzerland, pp. 211-214. ISBN 978-087849968-7

micro businesses

Ross, Pauline and McGowan, Carol G. and Styger, Lee E. J. (2012) A comparison of theory and practice in market intelligence gathering for Australian micro-businesses and SMEs. In: 19th International Business Research Conference, 19-21 Nov 2012, Melbourne, Australia .

micro-crack density

He, Yu-xin and Li, Qi and Kuila, Tapas and Kim, Nam Hoon and Jiang, Tongwu and Lau, Kin-tak and Lee, Joong Hee (2013) Micro-crack behavior of carbon fiber reinforced thermoplastic modified epoxy composites for cryogenic applications. Composites Part B: Engineering , 44 (1). pp. 533-539. ISSN 1359-8368

micro-hardness

Cheung, Hoi-Yan and Lau, Kin-tak and Tao, Xiao-Ming and Hui, David (2008) A potential material for tissue engineering: silkworm silk/PLA biocomposite. Composites Part B: Engineering, 39 (6). pp. 1026-1033. ISSN 1359-8368

micro-spheres

Islam, Md Mainul and Kim, Ho Sung (2006) Novel syntactic foams made of ceramic hollow micro-spheres and starch - theory, structure and properties. In: 5th International Composites Conference (ACUN-5) , 11-14 July 2006, Sydney, Australia.

micro-structural

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

microbially influenced corrosion (MIC)

Cheng, Sha and Lau, Kin-Tak and Chen, Shougang and Chang, Xueting and Liu, Tao and Yin, Yansheng (2010) Microscopical observation of the marine bacterium vibrio natriegeus growth on metallic corrosion. Materials and Manufacturing Processes, 25 (5). pp. 293-297. ISSN 1042-6914

microcapsules

Guo, Qing Bing and Lau, Kin-Tak and Rong, Min Zhi and Zhang, Ming Qiu (2010) Optimization of tribological and mechanical properties of epoxy through hybrid filling. Wear, 269 (1-2). pp. 13-20. ISSN 0043-1648

microencapsulation

Guo, Qing Bing and Lau, Kin-Tak and Zheng, Bing Fa and Rong, Min Zhi and Zhang, Ming Qiu (2009) Imparting ultra-low friction and wear rate to epoxy by the incorporation of microencapsulated lubricant? Macromolecular Materials and Engineering, 294 (1). pp. 20-24. ISSN 1438-7492

microfibre resins

Manalo, A. C. and Karunasena, W. and Sirimanna, C. and Maranan, G. (2013) Fibre composites pile rehabilitation and concrete formwork jacket - Concept development and finite element analysis. In: 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 December 2013, Melbourne, Australia.

microparameter

Lian, C. and Zhuge, Y. and Beecham, S. (2011) Modelling pervious concrete under compression loading – a discrete element approach. In: ICSBM 2011: 1st International Conference on Structures and Building Materials, 7-9 Jan 2011, Guangzhou, China.

microscope technologies

Cheng, Sha and Lau, Kin-Tak and Chen, Shougang and Chang, Xueting and Liu, Tao and Yin, Yansheng (2010) Microscopical observation of the marine bacterium vibrio natriegeus growth on metallic corrosion. Materials and Manufacturing Processes, 25 (5). pp. 293-297. ISSN 1042-6914

microscopic observations

Cheung, Hoi-Yan and Lau, Kin-tak and Tao, Xiao-Ming and Hui, David (2008) A potential material for tissue engineering: silkworm silk/PLA biocomposite. Composites Part B: Engineering, 39 (6). pp. 1026-1033. ISSN 1359-8368

Microsoft Office

Ku, H. and Fulcher, R. (2012) Using computer software packages to enhance the teaching in engineering management science: part 2 - programming techniques. Computer Applications in Engineering Education, 20 ( 1). pp. 114-123. ISSN 1099-0542

microsphere size

Islam, Md Mainul and Kim, Ho Sung (2011) Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment. Journal of Materials Processing Technology, 211 (4). pp. 708-716. ISSN 0924-0136

Islam, Md Mainul and Kim, Ho Sung (2008) Pre-mould processing for syntactic foams: modelling, theory and experiment. In: 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME-13), 27-29 May, 2008, Cairo, Egypt.

microsphere sizes

Islam, M. M. and Kim, H. S. (2009) An overview on manufacturing and properties of syntactic foams made of ceramic hollow microspheres and starch. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

microstructural evolution

Ning, Zhiliang and Wang, Hao and Sun, Jianfei (2010) Deformation behavior of semisolid A356 alloy prepared by low temperature pouring. Materials and Manufacturing Processes, 25 (7). pp. 648-653. ISSN 1042-6914

Ning, Zhiliang and Wu, Peilian and Wang, Hao and Cao, Fuyang and Sun, Jianfei (2007) Effect of pouring temperature on thixotropic microstructure formation of AZ91. Rare Metals, 26 (S1). pp. 180-184. ISSN 1001-0521

Wang, Hao and Davidson, C. J. and StJohn, David H. (2004) Semisolid microstructural evolution of AlSi7Mg during partial remelting. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing , 368 (1-2). pp. 159-167. ISSN 0921-5093

microstructure

Yu, Bao Yi and Wang, Qing and Li, Qiang and Wu, Yu Juan and Chen, Yan (2013) Interface microstructure and mechanical properties of copper/aluminum composite material. In: 3rd International Conference on Advanced Engineering Materials and Technology (AEMT 2013), 11-12 May 2013, Zhangjiajie, China.

Hua, Fuan and Zhang, Chaoyi and Li, Qiang and Yu, Baoyi and Liu, Weihua and Li, Runxia and Xie, Shuisheng and Huang, Guojie and Cheng, Lei and Fu, Yao and Wang, Hao (2011) Numerical simulation of rolling process and microstructure evolution of AM50 Mg alloy during hot rolling process. Advanced Materials Research, 291-29. pp. 449-454. ISSN 1662-8985

Wang, Hao (2005) Bulk metallic glass composites. Journal of Materials Science and Technology, 21 (s1). pp. 86-90. ISSN 1005-0302

microstructure and materials properties

Albdiry, Mushtaq and Alethari, Haydar (2012) Effect of alumina inclusions on microstructure and mechanical properties of 62 WC, 32 (Ti-W) C and 6 Co compacts. International Journal of Microstructure and Materials Properties, 7 (4). pp. 329-340. ISSN 1741-8410

microstructure formation

Yao, Xiangdong and Wang, Hao and He, B. and Zhou, X. (2005) Modeling of columnar-to-equiaxed transition in solidified Al-Si alloys. In: 5th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 5), 2-5 Nov 2004, Beijing, China.

microstructure modeling

Li, Qiang and Yu, Baoyi and Zhang, Huawen and Li, Runxia and Wang, Feng and Xie, Shuisheng and Huang, Guojie and Wang, Hao (2010) Cellular automaton modeling of semisolid microstructure formation. China Foundry, 7 (2). pp. 143-148. ISSN 1672-6421

Yao, X. and Wang, H. (2006) Modeling of semisolid structure formation in controlled nucleation method. International Journal of Modern Physics B, 20 (25-27). pp. 4123-4128. ISSN 0217-9792

microstructures

Chen, Ling and Tang, Chak Yin and Ku, Harry Siu-Lung and Tsui, Chi Pong and Chen, Xu (2014) Microwave sintering and characterization of polypropylene/multi-walled carbon nanotube/hydroxyapatite composites. Composites Part B: Engineering , 56. pp. 504-511. ISSN 1359-8368

Dong, Yu and Chaudhary, Deeptangshu and Ploumis, Charlie and Lau, Kin-tak (2011) Correlation of mechanical performance and morphological structures of epoxy micro/nanoparticulate composites. Composites Part A: Applied Science and Manufacturing , 42 (10). pp. 1483-1492. ISSN 1359-835X

microstructures and mechanical properties

Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275

Zhu, Z. W. and Zhang, H. F. and Wang, Hao and Ding, B. Z. and Hu, Z. Q. and Huang, Han (2009) Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting. Journal of Materials Research, 24 (10). pp. 3108-3115. ISSN 0884-2914

microwave irradiation

Ku, H. and Trada, M. and Puttgunta, V. C. (2007) Mechanical properties of vinyl ester composites cured by microwave irradiation: pilot study. Key Engineering Materials, 334-33. pp. 537-540. ISSN 1013-9826

microwaves

Ku, H. and Trada, M. and Tai, P. (2013) Dielectric properties of sawdust reinforced epoxy composites post-cured in microwaves. Journal of Reinforced Plastics and Composites, 32 (10). pp. 765-774. ISSN 0731-6844

Ku, Harry S. (2012) Processing of materials using electromagnetic fields. In: Wiley encyclopedia of composites, 2nd ed. John Wiley & Sons, Inc., Hoboken, NJ. United States, pp. 2487-2500. ISBN 978-0-470-12828-2

Ku, H. and Zhou, Hong and Wong, Peter and Su, Gang and Vadher, Jayent (2012) Modeling the flexural properties of SLG reinforced phenol formaldehyde composites using Langrage’s Method. Advanced Materials Research, 410. pp. 305-308. ISSN 1022-6680

Trada, Mohan and Ku, Harry and Vedhar, Jayant (2009) Flexural strength of phenol formaldehyde composites post-cured in microwaves: preliminary results. In: MFMS 2009: 2nd International Conference on Multi-functional Materials and Structures, 9-12 Oct 2009, Qingdao, China.

Ku, H. and Cardona, F. and Pattarachaiyakoop, N. and Trada, M. (2009) Fracture toughness of phenol formaldehyde composites reinforced with e-spheres. Journal of Composite Materials, 43 (7). pp. 741-754. ISSN 0021-9983

Ku, H. and Cardona, F. and Ball, J. and Jacobson, W. and Trada, M. (2008) Relationship between electrical and mechanical loss tangents of SLG reinforced phenolic composites: pilot study. Journal of Composite Materials, 42 (19). pp. 2083-2095. ISSN 0021-9983

Ku, H. and Chan, W. L. and Trada, M. and Baddeley, D. (2007) An evaluation of fracture toughness of vinyl ester composites cured under microwave conditions. Journal of Materials Engineering and Performance, 16 (6). pp. 741-745. ISSN 1059-9495

Cardona, F. and Ku, H. and Pattarachaiyakoop, N. and Rogers, D. and Trada, M. (2007) Fracture toughness of phenol formaldehyde composites post-cured in microwaves. Journal of Electromagnetic Waves and Applications, 21 (14). pp. 2137-2146. ISSN 0920-5071

Ku, H. and Trada, M. and Puttgunta, V. C. and Kota, V. (2007) Yield and tensile strength of vinyl ester composites cured by microwaves. Journal of Electromagnetic Waves and Applications, 21 (4). pp. 517-526. ISSN 0920-5071

Ku, Harry S. and Puttgunta, V. C. and Trada, Mohan (2006) Young's modulus of vinyl ester composites cured by microwave irradiation: preliminary results. Journal of Electromagnetic Waves and Applications, 20 (14). pp. 1911-1924. ISSN 0920-5071

microwaves and vinyl+ ester resin

Ku, Harry S. and Van Erp, Gerard and Ball, James A. R. and Ayers, Stephen R. and Siu, Fred (2002) Shrinkage reduction of thermoset fibre composites during hardening using microwaves irradiation for curing. In: 2nd World Engineering Congress, 22-25 Jul 2002, Kuching, Malaysia.

MID

Islam, Md Mainul and Kim, Ho Sung (2011) Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment. Journal of Materials Processing Technology, 211 (4). pp. 708-716. ISSN 0924-0136

Islam, Md Mainul and Kim, Ho Sung (2008) Pre-mould processing for syntactic foams: modelling, theory and experiment. In: 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME-13), 27-29 May, 2008, Cairo, Egypt.

Miedema's model

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2007) A practical thermodynamic method to calculate the best glass-forming composition for bulk metallic glasses. International Journal of Nonlinear Sciences and Numerical Simulation, 8 (2). pp. 171-178. ISSN 1565-1339

military modular shelter system

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2008) M2S2 modular deployable shelter system: concept and analysis technique. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

milling machine design

Al-Sandooq, J. M. and Yousif, B. F. and Jensen, T. A. (2012) Tribological consideration in roller mill machines for agriculture applications. Surface Review and Letters, 19 (6). pp. 1250065-1. ISSN 0218-625X

minimum intermicrosphere distance

Islam, Md Mainul and Kim, Ho Sung (2007) Manufacture of syntactic foams: pre-mold processing. Materials and Manufacturing Processes, 22 (1). pp. 28-36. ISSN 1042-6914

mixes

Sirimanna, Chamila Sampath and Islam, Md Mainul and Aravinthan, Thiru (2011) Polymer based filler materials as infill for GFRP pile connector. In: ICCST8: 8th International Conference on Composite Science and Technology, 22-24 Mar 2011, Kuala Lumpur, Malaysia.

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2011) Preliminary development of polymer based filler materials for GFRP tubular connector. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

mixing

Islam, Md Mainul and Kim, Ho Sung (2011) Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment. Journal of Materials Processing Technology, 211 (4). pp. 708-716. ISSN 0924-0136

Islam, Md Mainul and Kim, Ho Sung (2008) Manufacture of syntactic foams using starch as binder: post-mold processing. Materials and Manufacturing Processes, 23 (8). pp. 884-892. ISSN 1042-6914

mixing enthalpy

Wang, Hao and Fu, H. M. and Zhang, H. F. and Hu, Z. Q. (2007) A practical thermodynamic method to calculate the best glass-forming composition for bulk metallic glasses. International Journal of Nonlinear Sciences and Numerical Simulation, 8 (2). pp. 171-178. ISSN 1565-1339

mixing process

Ho, Mei-po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

modal acoustic emission

Hafizi, Mohd Zohari and Epaarachchi, Jayantha Ananda and Lau, K. T. (2013) Modal acoustic emission investigation for progressive failure monitoring in thin composite plates under tensile test. In: 4th Asia-Pacific Workshop on Structural Health Monitoring (APWSHM 2012), 5-7 Dec 2012, Melbourne, Australia.

Hafizi, Z. M. and Epaarachchi, J. and Lau, K. T. (2012) Modal analysis of high frequency acoustic signal approach for progressive failure monitoring in thin composite plates. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

modeFRONTIER

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2011) Multi-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applications. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

model

Islam, Md Mainul and Kim, Ho Sung (2011) Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment. Journal of Materials Processing Technology, 211 (4). pp. 708-716. ISSN 0924-0136

Islam, Md Mainul and Kim, Ho Sung (2008) Manufacture of syntactic foams using starch as binder: post-mold processing. Materials and Manufacturing Processes, 23 (8). pp. 884-892. ISSN 1042-6914

modeling

Mo, Chun-li and Li, Qiang and Guo, Xu-ming and Wang, Hao (2012) Numerical simulation the temperature field of the multi-coil batch during annealing process in Bell-type furnace. Advanced Materials Research, 538-54. pp. 637-641. ISSN 1022-6680

modelling

Ku, H. and Epaarachchi, J. and Trada, M. and Wong, P. (2013) Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves. Journal of Reinforced Plastics and Composites, 32 (10). pp. 689-699. ISSN 0731-6844

Zhuge, Y. and Mills, J. (2011) Modelling of multi-panel transmission tower retrofitted with leg reinforcement. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Lian, Chunqi and Zhuge, Yan and Beecham, Simon (2011) Numerical simulation of the mechanical behaviour of porous concrete. Engineering Computations: International Journal for Computer-Aided Engineering and Software, 28 (8). pp. 984-1002. ISSN 0264-4401

Yao, Xiangdong and Wang, Hao and He, B. and Zhou, X. (2005) Modeling of columnar-to-equiaxed transition in solidified Al-Si alloys. In: 5th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 5), 2-5 Nov 2004, Beijing, China.

modified cellular automaton

Li, Qiang and Yu, Baoyi and Zhang, Huawen and Li, Runxia and Wang, Feng and Xie, Shuisheng and Huang, Guojie and Wang, Hao (2010) Cellular automaton modeling of semisolid microstructure formation. China Foundry, 7 (2). pp. 143-148. ISSN 1672-6421

modified phenolic core

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2010) In-plane shear behaviour of fibre composite sandwich beams using asymmetrical beam shear test. Construction and Building Materials, 24 (10). pp. 1952-1960. ISSN 0950-0618

Manalo, A. C. and Aravinthan, T. and Karunasena, W. and Islam, M. M. (2010) Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions. Composite Structures, 92 (4). 984-995 . ISSN 0263-8223

modulus

Epaarachchi, J. and Ku, H. and Gohel, K. (2010) A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites. Journal of Composite Materials, 44 (6). pp. 779-788. ISSN 0021-9983

modulus of elasticity

Manalo, Allan and Aravinthan, Thiru and Karunasena, Warna and Stevens, Nick (2012) Analysis of a typical railway turnout sleeper system using grillage beam analogy. Finite Elements in Analysis and Design, 48 (1). 1376-1391 . ISSN 0168-874X

Hussin, Manal and Zhuge, Yan and Bullen, Frank and Lokuge, Weena (2012) Investigation of some fundamental properties of permeable concrete. In: International Conference on Emerging Materials and Mechanics Applications (ICEMMA 2012): , 5-6 Feb 2012, Hangzhou, China.

Manalo, A. C. and Aravinthan, T. and Karunasena, W. and Stevens, N. (2011) The effect of modulus of elasticity on the behaviour of railway turnout sleepers. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

moisture absorption

Francucci, G. and Manthey, N. W. and Cardona, F. and Aravinthan, T. (2014) Processing and characterization of 100% hemp-based biocomposites obtained by vacuum infusion. Journal of Composite Materials , 48 (11). pp. 1323-1335. ISSN 0021-9983

Manthey, Nathan W. and Cardona, Francisco and Francucci, Gaston and Aravinthan, Thiru (2013) Thermo-mechanical properties of epoxidized hemp oil-based bioresins and biocomposites. Journal of Reinforced Plastics and Composites , 32 (19). pp. 1444-1456. ISSN 0731-6844

moisture effect

Cardona, Francisco and Tawfik, Qaidar H. and Karunasena, Karu (2012) Reinforcement of corroded steel structures with CFRP panels. In: ICACE 2012: International Conference on Architectural and Civil Engineering, 24-25 Oct 2012, Bali, Indonesia.

molding

Islam, Md Mainul and Kim, Ho Sung (2007) Manufacture of syntactic foams: pre-mold processing. Materials and Manufacturing Processes, 22 (1). pp. 28-36. ISSN 1042-6914

moment-curvature relation

Karunasena, Warna (Karu) and Martin, Nicole (2007) The effect of debonding on the flexural behaviour of reinforced concrete beams strengthened with fibre reinforced polymer. In: 5th Australasian Congress on Applied Mechanics (ACAM 2007), 10-12 Dec 2007, Brisbane, Australia.

monitoring

Sirimanna, C. S. and Islam, M. M. and Aravinthan, T. (2010) Temperature effects on full scale FRP bridge using innovative composite components. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

morphology

Albdiry, M. T. and Yousif, B. F. (2014) Role of silanized halloysite nanotubes on structural, mechanical properties and fracture toughness of thermoset nanocomposites. Materials and Design, 57. pp. 279-288. ISSN 0261-3069

Yao, X. and Wang, H. and He, B. and Zhou, X. (2006) Numerical simulation of dendrite growth during solidification. International Journal of Nonlinear Sciences and Numerical Simulation, 7 (2). pp. 171-176. ISSN 1565-1339

moving least square

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2012) Local moving least square-one-dimensional integrated radial basis function networks technique for incompressible viscous flows. International Journal for Numerical Methods in Fluids, 70. pp. 1443-1474. ISSN 0271-2091

multi-objective

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2011) Multi-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applications. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

multi-pultrusion fibre composite

Omar, T. and Van Erp, G. and Aravinthan, T. and Key, P. (2008) M2S2 modular deployable shelter system: concept and analysis technique. In: ISEC 4: Innovations in Structural Engineering and Construction, 26-28 Sep 2007, Melbourne, Australia.

multifunctional materials

Lau, Kin-tak and Ho, Mei-po and Au-Yeung, Chi-ting and Cheung, Hoi-yan (2010) Biocomposites: their multifunctionality. International Journal of Smart and Nano Materials, 1 (1). pp. 13-27. ISSN 1947-5411

multiple back-propagation

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2013) Development of artificial neural network model in predicting performance of the smart wind turbine blade. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

multiwall nanotubes

Tarawneh, Mouad. A. and Ahmad, Sahrim Hj. and Rasid, Rozaidi and Yahya, S. Y. and Lau, Kin-tak and Kong, Ing and Noum, Se Yong Eh (2011) Thermal behavior of MWNT-reinforced thermoplastic natural rubber nanocomposites. Journal of Reinforced Plastics and Composites, 30 (3). pp. 216-221. ISSN 0731-6844

myristic acid

Liu, Tao and Lau, Kin-Tak and Chen, Shougang and Cheng, Sha and He, Tian and Yin, Yansheng (2010) The electrochemistry corrosion behavior of Fe3Al-type intermetallic with super-hydrophobic surfaces. Materials and Manufacturing Processes, 25 (5). pp. 298-301. ISSN 1042-6914

nafion

Mishra, Ananta Kumar and Bae, Seon-Hyeong and Kim, Nam Hoon and Lau, Kin-tak and Lee, Joong Hee (2012) Nafion-peptized laponite clay nanocomposite membrane for PEMFC. In: 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM 20), 15-18 Dec 2011, Hong Kong.

nano materials

Zhuge, Yan (2013) A review of aerogels and their application as a multi-functional building material. Applied Mechanics and Materials, 253-25. pp. 564-567. ISSN 1660-9336

nano research

Leng, Jinsong and Li, Jianjun and Lau, Alan kin-tak (2011) Introduction. In: Multifunctional polymer nanocomposites. Taylor & Francis (CRC Press), Boca Raton, FL. United States, pp. 1-18. ISBN 978-1-4398-1682-0

nano- SiO

Guo, Qing Bing and Lau, Kin-Tak and Rong, Min Zhi and Zhang, Ming Qiu (2010) Optimization of tribological and mechanical properties of epoxy through hybrid filling. Wear, 269 (1-2). pp. 13-20. ISSN 0043-1648

nano-architecture

Bose, Saswata and Kim, Nam Hoon and Kuila, Tapas and Lau, Kin-tak and Lee, Joong Hee (2011) Electrochemical performance of a graphene–polypyrrole nanocomposite as a supercapacitor electrode. Nanotechnology, 22 (29). p. 5202. ISSN 0957-4484

nano-structures

Chan, Mo-lin and Lau, Kin-tak and Wong, Tsun-tat and Ho, Mei-po and Hui, David (2011) Mechanism of reinforcement in a nanoclay/polymer composite. Composites Part B: Engineering, 42 (6). pp. 1708-1712. ISSN 1359-8368

nanoclay

Ku, H. and Trada, Mohan (2013) Tensile properties of nanoclay reinforced epoxy composites. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Ku, H. and Fung, S. Y. and Islam, M. and Li, X. and Chong, Y. P. (2013) A pilot study on flexural properties of epoxy nanoclay reinforced composites. Journal of Reinforced Plastics and Composites, 32 (2). pp. 96-104. ISSN 0731-6844

nanoclay/polymer composites

Albdiry, M. T. and Yousif, B. F. and Ku, H. and Lau, K. T. (2012) A critical review on the manufacturing processes in relation to the properties of nanoclay/polymer composites. Journal of Composite Materials. ISSN 0021-9983 (In Press)

nanocomposite

Mishra, Ananta Kumar and Bae, Seon-Hyeong and Kim, Nam Hoon and Lau, Kin-tak and Lee, Joong Hee (2012) Nafion-peptized laponite clay nanocomposite membrane for PEMFC. In: 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM 20), 15-18 Dec 2011, Hong Kong.

Yao, X. D. and Wu, C. Z. and Wang, Hao and Cheng, H. M. and Lu, G. Q. (2006) Effects of carbon nanotubes and metal catalysts on hydrogen storage in magnesium nanocomposite. Journal of Nanoscience and Nanotechnology, 6 (2). pp. 494-498. ISSN 1533-4880

nanocomposites

Liu, Shan and Yan, Hongqiang and Fang, Zhengping and Wang, Hao (2014) Effect of graphene nanosheets on morphology, thermal stability and flame retardancy of epoxy resin. Composites Science and Technology, 90. pp. 40-47. ISSN 0266-3538

Fang, Zhengping and Shang, Shuying and Wang, Hao (2013) Confinement of C60 nanoparticles on the dynamics of polystyrene studied by anelastic spectroscopy and rheometrics. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Tarawneh, Mouad. A. and Ahmad, Sahrim Hj. and Rasid, Rozaidi and Yahya, S. Y. and Lau, Kin-tak and Kong, Ing and Noum, Se Yong Eh (2011) Thermal behavior of MWNT-reinforced thermoplastic natural rubber nanocomposites. Journal of Reinforced Plastics and Composites, 30 (3). pp. 216-221. ISSN 0731-6844

Leng, Jinsong and Lau, Alan kin-tak, eds. (2011) Multifunctional polymer nanocomposites. Taylor & Francis (CRC Press), Boca Raton, FL. United States. ISBN 978-1-4398-1682-0

Bose, Saswata and Kuila, Tapas and Uddin, Md. Elias and Kim, Nam Hoon and Lau, Alan K. T. and Lee, Joong Hee (2010) In-situ synthesis and characterization of electrically conductive polypyrrole/graphene nanocomposites. Polymer, 51 (25). pp. 5921-5928. ISSN 0032-3861

Lau, Kin-Tak and Cheung, Hoi-Yan and Lu, Jian Ping and Yin, Yan-Sheng and Hui, David and Li, Hu-Lin (2008) Carbon nanotubes for space and bio-engineering applications. Journal of Computational and Theoretical Nanoscience, 5 (1). pp. 23-35. ISSN 1546-1955

Yao, X. and Wu, C. Z. and Wang, H. and Cheng, H. M. and Lu, G. Q. Max (2005) Hydrogen storage of magnesium-based nanocomposites system. Journal of Materials Science & Technology, 21 (s 1). pp. 57-60. ISSN 1005-0302

nanoindentation

Lau, Mei-ling and Lau, Kin-tak and Ku, Harry and Bahattacharyya, Debes and Lee, Joong-Hee (2012) Assessing heat-treatment effects on bovine cortical bones by nanoindentation. In: PFAM 20: 20th International Symposium on Processing and Fabrication of Advanced Materials , 15-18 Dec 2011, Hong Kong.

Lau, Mei-Ling and Lau, Kin-Tak and Ku, Harry and Bahattacharyya, Debes and Yao, Yan-Dong (2012) Measurements of heat treatment effects on bovine cortical bones by nanoindentation and compression testing. Journal of Biomaterials and Nanobiotechnology, 3 (1). pp. 105-113. ISSN 2158-7027

Lau, Mei-ling and Lau, Kin-tak and Yao Yeo, Yan-Dong and Au Yeung, Chi-ting and Lee, Joong-hee (2010) Measurement of bovine bone properties through surface indentation technique. Materials and Manufacturing Processes, 25 (5). pp. 324-328. ISSN 1042-6914

nanoindentation tests

Zhu, Z. W. and Zhang, H. F. and Wang, Hao and Ding, B. Z. and Hu, Z. Q. and Huang, Han (2009) Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting. Journal of Materials Research, 24 (10). pp. 3108-3115. ISSN 0884-2914

Li, Xiao-Feng and Lau, Kin-Tak and Yin, Yan-Sheng (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology, 68 (14). pp. 2876-2881. ISSN 0266-3538

nanoindenter

Li, Xiao-Feng and Lau, Kin-Tak and Yin, Yan-Sheng (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology, 68 (14). pp. 2876-2881. ISSN 0266-3538

nanomaterials

Park, Ok-kyung and Kim, Nam Hoon and Lau, Kin-Tak and Lee, Joong Hee (2010) Effect of surface treatment with potassium persulfate on dispersion stability of multi-walled carbon nanotubes. Materials Letters, 64 (6). pp. 718-721. ISSN 0167-577X

nanoparticles

Guo, Qing Bing and Rong, Min Zhi and Jia, Guo Liang and Lau, Kin-Tak and Zhang, Ming Qiu (2009) Sliding wear performance of nano-SiO2/short carbon fiber/epoxy hybrid composites. Wear, 266 (7-8). pp. 658-665. ISSN 0043-1648

nanostructured materials

Wang, Zhicai and Xu, Cailing and Zhao, Yongqing and Zhao, Dandan and Wang, Zhe and Li, Hulin and Lau, Kin-Tak (2008) Fabrication and mechanical properties of exfoliated clay-CNTs/epoxy nanocomposites. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 490 (1-2). pp. 481-487. ISSN 0921-5093

nanotechnology

Lau, Alan kin-tak (2011) Carbon nanotube-reinforced nanocomposites. In: Multifunctional polymer nanocomposites. Taylor & Francis (CRC Press), Boca Raton, FL. United States, pp. 19-45. ISBN 978-1-4398-1682-0

Leng, Jinsong and Li, Jianjun and Lau, Alan kin-tak (2011) Introduction. In: Multifunctional polymer nanocomposites. Taylor & Francis (CRC Press), Boca Raton, FL. United States, pp. 1-18. ISBN 978-1-4398-1682-0

NaOH treatment concentration

Alsaeed, T. and Alajmi, A. and Yousif, B. F. and Ku, H. and Lau, Alan Kin-tak (2012) Experimental investigation on the interfacial adhesion of date palm fibres with epoxy matrix. In: Composites Australia and the CRC for Advanced Composite Structures Conference 2012: Diversity in Composites, 15-16 Mar 2012, Leura, Australia.

natural composites

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2014) A study into the characteristics of gomuti (Arenga pinnata) fibre for usage as natural fibre composites. Journal of Reinforced Plastics and Composites, 33 (2). pp. 179-192. ISSN 0731-6844

natural fiber

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2010) A review of current development in natural fiber composites for structural and infrastructure applications. In: Southern Region Engineering Conference (SREC 2010), 10-12 Nov 2010, Toowoomba, Australia.

natural fiber composites

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2013) Significance analysis of flexural behaviour of hybrid sandwich panels. Open Journal of Civil Engineering, 3 (3B). pp. 1-7. ISSN 2164-3164

natural fibers

Francucci, G. and Manthey, N. W. and Cardona, F. and Aravinthan, T. (2014) Processing and characterization of 100% hemp-based biocomposites obtained by vacuum infusion. Journal of Composite Materials , 48 (11). pp. 1323-1335. ISSN 0021-9983

natural fibre

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2014) A study into the characteristics of gomuti (Arenga pinnata) fibre for usage as natural fibre composites. Journal of Reinforced Plastics and Composites, 33 (2). pp. 179-192. ISSN 0731-6844

Alsaeed, T. and Yousif, B. F. and Ku, H. (2013) The potential of using date palm fibres as reinforcement for polymeric composites. Materials and Design, 43. pp. 177-184. ISSN 0264-1275

Kabir, Mohammad Mazedul and Islam, Md Mainul and Wang, Hao (2013) Mechanical and thermal properties of jute fibre reinforced composites. Journal of Multifunctional Composites, 1 (1). pp. 71-77. ISSN 2168-4246

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2013) Properties and behaviour of gomuti fibre composites under tensile and compressive load. In: 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22): From Materials to Structures: Advancement Through Innovation, 11-14 Dec 2012, Sydney, Australia.

Nirmal, Umar and Hashim, Jamil and Lau, Saijod T. W. and Yuhazri, M. Y. and Yousif, B. F. (2012) Betelnut fibres as an alternative to glass fibres to reinforce thermoset composites: a comparative study. Textile Research Journal, 82 (11). pp. 1107-1120. ISSN 0040-5175

Ho, Mei-po and Wang, Hao and Lee, Joong-Hee and Ho, Chun-kit and Lau, Kin-tak and Leng, Jinsong and Hui, David (2012) Critical factors on manufacturing processes of natural fibre composites. Composites Part B: Engineering, 43 (8). pp. 3549-3562. ISSN 1359-8368

Kabir, M. M. and Wang, H. and Aravinthan, T. and Cardona, F. and Lau, K.-T. (2011) Effects of natural fibre surface on composite properties: a review. In: eddBE2011: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing , 27-29 Apr 2011, Brisbane, Australia.

Singh, N. and Yousif, B. F. and Rilling, D. (2011) Adhesive wear of thermoplastic composite based on kenaf fibres. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225 (2). pp. 101-109. ISSN 1350-6501

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2011) Natural fibre composites with QLD based fibres and vegetable oils. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Kabir, Mohammad Mazedul and Islam, Md Mainul and Wang, Hao (2010) Mechanical and thermal properties of untreated and chemically treated jute fibre reinforced composites. In: ICMIEE 2010: International Conference on Mechanical, Industrial and Energy Engineering , 23-24 Dec 2010, Khulna, Bangladesh.

Manthey, N. W. and Cardona, F. and Aravinthan, T. and Wang, H. and Cooney, T. (2010) Natural fibre composites with epoxidized vegetable oil (EVO) resins: a review. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

natural fibre composites

Yan, Z. L. and Zhang, J. C. and Lin, G. and Zhang, H. and Ding, Y. and Wang, H. (2013) Fabrication process optimization of hemp fibre-reinforced polypropylene composites. Journal of Reinforced Plastics and Composites, 32 (20). pp. 1504-1512. ISSN 0731-6844

Ticoalu, Adriana and Aravinthan, Thiru and Cardona, Francisco (2013) A review on the characteristics of gomuti fibre and its composites with thermoset resins. Journal of Reinforced Plastics and Composites, 32 (2). pp. 124-136. ISSN 0731-6844

Yan, Z. L. and Wang, H. and Lau, K. T. and Zhang, J. C. and Zhang, H. and Ding, Y. (2012) Fabrication process optimization of hemp fibre reinforced polypropylene composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Ho, Mei-po and Wang, Hao and Lau, Kin-tak and Lee, Joong-hee and Hui, David (2012) Interfacial bonding and degumming effects on silk fibre/polymer biocomposites. Composites Part B: Engineering, 43 (7). pp. 2801-2812. ISSN 1359-8368

Ho, Mei-po and Lau, Kin-tak and Wang, Hao and Bhattacharyya, Debes (2011) Characteristics of a silk fibre reinforced biodegradable plastic. Composites Part B: Engineering, 42 (2). pp. 117-122. ISSN 1359-8368

Ticoalu, A. and Aravinthan, T. and Cardona, F. (2011) Experimental investigation into gomuti fibres/polyester composites. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Wang, H. and Kabir, M. M. and Lau, K. T. (2011) The effect of fibre chemical treatments on hemp reinforced composites. In: 18th International Conference on Composite Materials (ICCM-18), 21-26 Aug 2011, Jeju Island, Korea.

natural fibre reinforced plastics (NFRP)

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2013) Hybrid sandwich panel with natural fibre composite intermediate layer: Manufacturing process and significance analysis. Malaysian Journal of Civil Engineering, 25 (Special issue 1). pp. 95-111.

Fajrin, Jauhar and Zhuge, Yan and Bullen, Frank and Wang, Hao (2012) New concept for optimal application of natural fibre reinforced plastic (NFRP) in building construction. In: APSEC-ICCER 2012: Sustaining the World with Better Structures and Construction Practice, 2-4 Oct 2012, Surabaya, Indonesia.

natural fibres

Etaati, Amir and Mehdizadeh, Saman Abdanan and Wang, Hao and Pather, Selvan (2014) Vibration damping characteristics of short hemp fibre thermoplastic composites. Journal of Reinforced Plastics and Composites, 33 (4). pp. 330-341. ISSN 0731-6844

Shalwan, A. and Yousif, B. F. (2014) Investigation on interfacial adhesion of date palm/epoxy using fragmentation technique. Materials and Design , 53. pp. 928-937. ISSN 0261-3069

Manthey, Nathan W. and Cardona, Francisco and Francucci, Gaston and Aravinthan, Thiru (2013) Thermo-mechanical properties of epoxidized hemp oil-based bioresins and biocomposites. Journal of Reinforced Plastics and Composites , 32 (19). pp. 1444-1456. ISSN 0731-6844

Shalwan, A. and Yousif, B. F. (2013) In state of art: mechanical and tribological behaviour of polymeric composites based on natural fibres. Materials and Design, 48. pp. 14-24. ISSN 0264-1275

Azwa, Z. N. and Yousif, B. F. and Manalo, A. C. and Karunasena, W. (2013) A review on the degradability of polymeric composites based on natural fibres. Materials and Design, 47. pp. 424-442. ISSN 0264-1275

Ahmed, Mansur and Islam, Md Saiful and Ahsan, Qumrul and Islam, Md Mainul (2013) Silk fibers and their unidirectional polymer composites. In: Natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. Advances in Materials Science (2). Apple Academic Press, Oakville, ON. Canada , pp. 79-90. ISBN 978-1-926895-16-1

Yousif, Belal F. (2012) Adhesive wear characteristics of natural fiber-reinforced composites. In: Wear of advanced materials. John Wiley & Sons, Inc., London, United Kingdom, pp. 61-97. ISBN 978-1-84821-352-4

Ahmed, Mansur and Islam, Md Saiful and Ahsan, Qumrul and Islam, Md Mainul (2011) Fabrication and characterization of unidirectional silk fibre composites. In: ICCST8: 8th International Conference on Composite Science and Technology, 22-24 Mar 2011, Kuala Lumpur, Malaysia.

Kabir, M. M. and Wang, H. and Cardona, F. and Aravinthan, T. (2011) Effect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Wang, Hao (2010) Sustainable materials research at USQ. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

Yousif, B. F. (2010) Effect of oil palm fibres volume fraction on mechanical properties of polyester composites. International Journal of Modern Physics B, 24 (23). pp. 4459-4470. ISSN 0217-9792

natural frequencies

Karunasena, Warna (2010) The effect of debonding on the natural frequencies of laminated fibre composite sandwich plates. In: 6th Australasian Congress on Applied Mechanics (ACAM 6) , 12-15 Dec 2010, Perth, Western Australia.

natural frequency

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2013) Dynamic behaviour of debonded GFRP composite beams. Journal of Multifunctional Composites, 1 (2). pp. 113-122. ISSN 2168-4246

Jayatilake, Indunil and Karunasena, Warna and Lokuge, Weena (2013) Effect of skin-core debonding on the dynamic behaviour of GFRP composite beams. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

Karunasena, W. and Aravinthan, T. and Manalo, A. C. (2009) Vibration of debonded laminated fibre composite sandwich beams. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009), 9-11 Dec 2009, Seoul, Korea.

natural materials

Yousif, B. F. and Shalwan, A. and Chin, C. W. and Ming, K. C. (2012) Flexural properties of treated and untreated kenaf/epoxy composites. Materials and Design, 40. pp. 378-385. ISSN 0264-1275

natural polymers

Wang, Hao (2010) Sustainable materials research at USQ. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

natural fibre

Rao, Sanjeev and Banerjee, Sourish and Jayaraman, Krishnan and Bhattacharyya, Debes (2010) Compressive behavior of fibre reinforced honeycomb cores. In: 2008 IUTAM Symposium on Multi-Functional Material Structures and Systems, 10-12 Dec 2008, Bangalore, India.

Nd addition

Ning, Z. L. and Wang, H. and Liu, H. H. and Cao, F. Y. and Wang, S. T. and Sun, J. F. (2010) Effects of Nd on microstructures and properties at the elevated temperature of a Mg-0.3Zn-0.32Zr alloy. Materials and Design, 31 (9). pp. 4438-4444. ISSN 0264-1275

near-surface mounted reinforcement

Wang, Bo and Teng, J. G. and De Lorenzis, Laura and Zhou, Li-Min and Ou, Jinping and Jin, Wei and Lau, K. T. (2009) Strain monitoring of RC members strengthened with smart NSM FRP bars. Construction and Building Materials, 23 (4). pp. 1698-1711. ISSN 0950-0618

negative volume

Thota, N. M. and Epaarachchi, J. A. and Lau, K. T. (2013) Important aspects of finite element modeling of low density thermo plastic closed cell foams. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

network optimisation

Aldraho, Abdelnour and Kist, Alexander A. (2010) Heuristics for dynamic topologies to reduce power consumption of networks. In: ATNAC 2010: Australasian Telecommunication Networks and Applications Conference, 31 Oct-3 Nov 2010, Auckland, New Zealand.

network topology

Aldraho, Abdelnour and Kist, Alexander A. (2010) Heuristics for dynamic topologies to reduce power consumption of networks. In: ATNAC 2010: Australasian Telecommunication Networks and Applications Conference, 31 Oct-3 Nov 2010, Auckland, New Zealand.

New Zealand

Butcher, Peter and Thorpe, David (2007) A review of triple helix linkages in New Zealand earthquake engineering networks and comparison with the Australian cooperative research centre model. In: Triple Helix VI: 6th Biennial International Conference on University, Industry and Government Linkages, 16-18 May 2007, Singapore.

nickel alloys

Chen, Wei and Wang, Hao and Zhang, Lei and Tang, Xiushan (2009) Development of hot drawing process for nitinol tube. International Journal of Modern Physics B, 23 (6/7). pp. 1968-1974. ISSN 0217-9792

nickel-titanium alloys

Chen, Wei and Wang, Hao and Zhang, Lei and Tang, Xiushan (2009) Development of hot drawing process for nitinol tube. International Journal of Modern Physics B, 23 (6/7). pp. 1968-1974. ISSN 0217-9792

NIR FBG sensor

Hafizi, Z. M. and Kahandawa, G. C. and Epaarachchi, J. and Lau, K. T. and Canning, J. and Cook, K. (2013) NIR fibre bragg grating as dynamic sensor: an application of 1D digital wavelet analysis for signal denoising. In: 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 Jul 2013, Gold Coast, Australia.

NIR FBG sensors

Epaarachchi, Jayantha A. and Canning, John and Stevenson, Michael (2010) The response of embedded NIR (830 nm) fiber Bragg grating sensors in glass fiber composites under fatigue loading. Journal of Composite Materials, 44 (7). pp. 809-819. ISSN 0021-9983

NiTi

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2012) Development of smart wind turbine blades. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8) :Composites: Enabling Tomorrow’s Industry Today , 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2012) Design of smart structures for wind turbine blades. In: 2nd Malaysian Postgraduate Conference (MPC 2012), 7-9 July 2012, Gold Coast, Australia.

Nitinol tube

Chen, Wei and Wang, Hao and Zhang, Lei and Tang, Xiushan (2009) Development of hot drawing process for nitinol tube. International Journal of Modern Physics B, 23 (6/7). pp. 1968-1974. ISSN 0217-9792

noil hemp fibre

Etaati, A. and Wang, H. and Pather, S. and Yan, Z. and Mehdizadeh, S. Abdanan (2013) 3D X-ray microtomography study on fibre breakage in noil hemp fibre reinforced polypropylene composites. Composites Part B: Engineering, 50. pp. 239-246. ISSN 1359-8368

noise reductions

Choy, Yat-Sze and Lau, Kin-Tak and Wang, C. and Chau, C. W. and Liu, Yang and Hui, David (2009) Composite panels for reducing noise in air conditioning and ventilation systems. Composites Part B: Engineering, 40 (4). pp. 259-266. ISSN 1359-8368

noise reflections

Choy, Yat-Sze and Lau, Kin-Tak and Wang, C. and Chau, C. W. and Liu, Yang and Hui, David (2009) Composite panels for reducing noise in air conditioning and ventilation systems. Composites Part B: Engineering, 40 (4). pp. 259-266. ISSN 1359-8368

non-biodegradable

Lau, Alan K. T. and Ho, Mabel M. P. (2011) Recent research trend in natural-fibre composites. JEC Composites (67). pp. 50-52. ISSN 1639-965X

non-lethal

Thota, Narasimha Murthy and Eepaarachchi, Jayantha A. and Lau, K. T. (2012) Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study. In: 7th Australasian Congress on Applied Mechanics (ACAM 7), 9-12 Dec 2012, Adelaide, Australia.

non-lethal ammunition

Thota, Narasimha M. and Epaarachchi, Jayantha A. and Lau, Kin-tak (2013) Effect of the energy absorbing mechanisms on the blunt thoracic trauma caused by a typical foam projectile. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

non-linear autoregressive with exogenous

Supeni, E. E. and Epaarachchi, J. A. and Islam, M. M. and Lau, K. T. (2013) Development of artificial neural network model in predicting performance of the smart wind turbine blade. In: 3rd Malaysian Postgraduate Conference (MPC 2013), 4-5 Jul 2013, Sydney, Australia.

non-linear dynamic analysis

Thota, N. M. and Epaarachchi, J. A. and Lau, K. T. (2013) Important aspects of finite element modeling of low density thermo plastic closed cell foams. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

non-linear finite element

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2012) Experimental and numerical analysis of an innovative GFRP sandwich floor panel under point load. Engineering Structures, 41. pp. 126-135. ISSN 0141-0296

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2011) Multi-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applications. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

non-linear transient impact analysis

Thota, Narasimha M. and Epaarachchi, Jayantha A. and Lau, Kin-tak (2013) Effect of the energy absorbing mechanisms on the blunt thoracic trauma caused by a typical foam projectile. In: 3rd World Congress on Frontiers of Mechanical, Aerospace and Automotive Engineering (WCFMAAE 2013), 2-3 Feb 2013, New Delhi, India.

non-recyclable

Lau, Alan K. T. and Ho, Mabel M. P. (2011) Recent research trend in natural-fibre composites. JEC Composites (67). pp. 50-52. ISSN 1639-965X

non-renewable

Lau, Alan K. T. and Ho, Mabel M. P. (2011) Recent research trend in natural-fibre composites. JEC Composites (67). pp. 50-52. ISSN 1639-965X

nonconventional technologies

Al-Juboori, Raed and Aravinthan, Vasantha and Yusaf, Talal (2010) A review of common and alternative methods for disinfection of microorganisms in water. In: 2010 Southern Region Engineering Conference (SREC 2010), 11-12 Nov 2010, Toowoomba, Australia.

normal strength concrete

Mutsuyoshi, Hiroshi and Hai, Nguyen Duc and Shiroki, Kensuke and Aravinthan, Thiru and Manalo, Allan (2011) Experimental investigation of HFRP composite beams. In: FRPRCS-10: 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures , 2-4 Apr 2011, Tampa, FL. United States.

normalisation

Xiang, Wei and Pietrobon, Steven S. (2003) On the capacity and normalisation of ISI channels. IEEE Transactions on Information Theory, 49 (9). pp. 2263-2268. ISSN 0018-9448

novel sandwich structure

Manalo, A. C. and Aravinthan, T. and Karunasena, W. (2012) Mechanical properties characterization of the skin and core of a novel composite sandwich structure. Journal of Composite Materials. ISSN 0021-9983 (In Press)

numerical

Guades, E. J. and Sirimanna, C. S. and Aravinthan, T. and Islam, M. M. (2011) Behaviour of fibre composite pile under axial compression load. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

numerical analysis

Islam, Md Mainul and Kim, Ho Sung (2007) Manufacture of syntactic foams: pre-mold processing. Materials and Manufacturing Processes, 22 (1). pp. 28-36. ISSN 1042-6914

Islam, Md Mainul and Kim, Ho Sung (2007) Syntactic foams consolidated with starch: modelling for pre-mould processing. Advanced Materials Research, 29-30. pp. 165-168. ISSN 1022-6680

Islam, Md Mainul and Kim, Ho Sung (2006) Syntactic foams consolidated with starch: modelling for pre-mould processing. In: 4th International Conference on Advanced Materials & Processing (ICAMP-4), 10-13 Dec 2006, Hamilton, New Zealand.

numerical methods

Ngo-Cong, D. and Mai-Duy, N. and Karunasena, W. and Tran-Cong, T. (2012) Local moving least square-one-dimensional integrated radial basis function networks technique for incompressible viscous flows. International Journal for Numerical Methods in Fluids, 70. pp. 1443-1474. ISSN 0271-2091

numerical simulation

Hua, Fuan and Zhang, Chaoyi and Li, Qiang and Yu, Baoyi and Liu, Weihua and Li, Runxia and Xie, Shuisheng and Huang, Guojie and Cheng, Lei and Fu, Yao and Wang, Hao (2011) Numerical simulation of rolling process and microstructure evolution of AM50 Mg alloy during hot rolling process. Advanced Materials Research, 291-29. pp. 449-454. ISSN 1662-8985

nylon 66

Ku, Harry S. and Siores, Elias and Ball, James A. R. (1999) Microwave facilities for welding thermoplastic composites and preliminary results. Journal of Microwave Power and Electromagnetic Energy, 34 (4). pp. 195-205. ISSN 0832-7823

nylon fiber

Epaarachchi, J. and Ku, H. and Gohel, K. (2010) A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites. Journal of Composite Materials, 44 (6). pp. 779-788. ISSN 0021-9983

occupational health and safety

Charles, Michael and Furneaux, Craig and Pillay, Janet and Thorpe, David and Parades Castello, Cynthya and Brown, Kerry (2007) Uptake of an OHS Code of Practice by Australian construction firms. In: CIB World Building Congress 2007: Construction for Development, 14-17 May 2007, Cape Town, South Africa.

one and two-way spanning

Islam, M. M. and Aravinthan, T. and Van Erp, G. (2009) Behaviour of innovative fibre composite sandwich panels under point loading. In: 2nd Asia-Pacific Conference on FRP in Structures (APFIS 2009) , 9-11 Dec 2009, Seoul, Korea.

one way

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2010) Cost optimum design of structural fibre composite sandwich panel for flooring applications. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

one- and two-way spanning

Islam, M. M. and Aravinthan, T. (2011) Behaviour of fibre composite sandwich panels under uniformly distributed loading. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

online course

Aravinthan, Thiru (2010) Challenges in the design and delivery of an online postgraduate course in fibre composites. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

online discussions

Manalo, Allan and Aravinthan, Thiru (2012) Peer assisted learning in an online postgraduate course on engineered fibre composites. In: AaeE 2012: The Profession of Engineering Education: Advancing Teaching, Research and Careers, 3-5 Dec 2012, Melbourne, Australia.

online postgraduate course

Aravinthan, Thiru and Manalo, Allan (2011) Student performance in an online postgraduate course on fibre composites for civil engineers. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

online quizzes

Aravinthan, Thiru and Lokuge, Weena and Manalo, Allan (2011) Effectiveness of formative online quizzes in learning and teaching a structural engineering course. In: AaeE 2011: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, 5-7 Dec 2011, Fremantle, Australia.

optimal content

Guo, Qing Bing and Lau, Kin-Tak and Rong, Min Zhi and Zhang, Ming Qiu (2010) Optimization of tribological and mechanical properties of epoxy through hybrid filling. Wear, 269 (1-2). pp. 13-20. ISSN 0043-1648

optimal design

Rao, Sanjeev and Banerjee, Sourish and Jayaraman, Krishnan and Bhattacharyya, Debes (2010) Compressive behavior of fibre reinforced honeycomb cores. In: 2008 IUTAM Symposium on Multi-Functional Material Structures and Systems, 10-12 Dec 2008, Bangalore, India.

optimal noise

Choy, Yat-Sze and Lau, Kin-Tak and Wang, C. and Chau, C. W. and Liu, Yang and Hui, David (2009) Composite panels for reducing noise in air conditioning and ventilation systems. Composites Part B: Engineering, 40 (4). pp. 259-266. ISSN 1359-8368

optimisation

Banerjee, S. and Bhattacharyya, D. (2011) Optimal design of sandwich panels made of wood veneer hollow cores. Composites Science and Technology, 71 (4). pp. 425-432. ISSN 0266-3538

optimization

Awad, Z. K. and Aravinthan, T. and Zhuge, Y. and Gonzalez, F. (2011) Multi-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applications. In: ACMSM 21: Incorporating Sustainable Practice in Mechanics of Structures and Materials, 7-10 Dec 2010, Melbourne, Australia.

Aldraho, Abdelnour and Kist, Alexander A. (2010) Heuristics for dynamic topologies to reduce power consumption of networks. In: ATNAC 2010: Australasian Telecommunication Networks and Applications Conference, 31 Oct-3 Nov 2010, Auckland, New Zealand.

Banerjee, S. and Battley, M. and Bhattacharyya, D. (2010) Shear strength optimization of reinforced honeycomb core materials. Mechanics of Advanced Materials and Structures, 17 (7). pp. 542-552. ISSN 1537-6494

Awad, Ziad K. and Gonzalez, Felipe and Aravinthan, Thiru (2010) Advanced robust design optimization of FRP sandwich floor panels. IOP Conference Series: Materials Science and Engineering, 10 (1). 012182,1-012182,9. ISSN 1757-899X

optimum design

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2010) Cost optimum design of structural fibre composite sandwich panel for flooring applications. In: CICE 2010: 5th International Conference on FRP Composites in Civil Engineering, 27-29 Sep 2010, Beijing, China.

optimum yield

Ku, H. and Trada, M. and Cecil, T. and Wong, P. (2010) Tensile tests of phenol formaldehyde glass-powder-reinforced composites: pilot study. Journal of Applied Polymer Science, 116 (1). pp. 10-17. ISSN 0021-8995

order of magnitude

Wang, H. and Ning, Z. L. (2009) Deformation behaviour of aluminum alloy A356 in semisolid state. In: ACMSM 20: Futures in Mechanics of Structures and Materials, 2-5 Dec 2008, Toowoomba, Australia.

organosolv lignin

Doherty, William and Halley, Peter J. and Edye, Les and Rogers, David and Cardona, Francisco and Park, Yosup and Woo, Tim (2007) Studies on polymers and composites from lignin and fiber derived from sugar cane. Polymers for Advanced Technologies, 18 (8). pp. 673-678. ISSN 1042-7147

orthogonal design

Yan, Z. L. and Zhang, J. C. and Lin, G. and Zhang, H. and Ding, Y. and Wang, H. (2013) Fabrication process optimization of hemp fibre-reinforced polypropylene composites. Journal of Reinforced Plastics and Composites, 32 (20). pp. 1504-1512. ISSN 0731-6844

Yan, Z. L. and Wang, H. and Lau, K. T. and Zhang, J. C. and Zhang, H. and Ding, Y. (2012) Fabrication process optimization of hemp fibre reinforced polypropylene composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM 8): Enabling Tomorrow's Industry Today, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

out-of-plane loads

Ma, Xing and Mills, Julie E. and Brown, Graham and Zhuge, Yan (2012) A force method model for static analysis of transmission line system subjected to in-plane and out-of-plane loadings. In: ICTAS 2011: 4th International Conference on Technology of Architecture and Structure, 22-24 Sep 2011, Xi'an, China.

overwrap

Falzon, P. and Leong, K. H. and McGarva, L. and Leong, Y. L. and Manalo, A. and Virk, A. and Leipnik, D. and Djukic, L. (2012) Development and assessment of a carbon fibre reinforced composite repair system. In: 8th Asian-Australasian Conference on Composite Materials, 6-8 Nov 2012, Kuala Lumpur, Malaysia.

palm oil

Aldousiri, B. and Alajmi, M. and Shalwan, A. (2013) Mechanical properties of palm fibre reinforced recycled HDPE. Advances in Materials Science and Engineering , 2013. pp. 1-7. ISSN 1687-8434

Yousif, Belal F. (2012) Adhesive wear characteristics of natural fiber-reinforced composites. In: Wear of advanced materials. John Wiley & Sons, Inc., London, United Kingdom, pp. 61-97. ISBN 978-1-84821-352-4

panel

Awad, Ziad K. and Aravinthan, Thiru and Zhuge, Yan (2009) Finite element analysis of fibre composite sandwich panel. In: Southern Engineering Conference, 17-18 Oct 2009, Springfield, Queensland, Australia.

paper

Islam, Md Mainul and Kim, Ho Sung (2012) Sandwich composites made of syntactic foam core and paper skin: manufacturing and mechanical behavior. Journal of Sandwich Structures and Materials, 14 (1). pp. 111-127. ISSN 1099-6362

Islam, Md Mainul and Kim, Ho Sung and Kabir, Mohammad Mazedul (2010) An overview on syntactic foam core and paper skin sandwich composites as potential building materials. In: 2010 International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2010), 23-24 Dec 2010, Khulna, Bangladesh.

Islam, Md Mainul and Kim, Ho Sung (2010) Manufacturing and behaviour of sandwich composites made of starch as binder for core and adhesive between core and skins. In: 2nd International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPN's and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP - 2010), 24-26 Sept 2010, Kotta