| Rank | Paper | File Downloads |
| 1 | Analysis and design of curtain wall systems for high rise buildings | 4423 |
| 2 | Steering system and suspension design for 2005 formula SAE-A car | 3013 |
| 3 | Review and redesign of Pilbara Iron 24MTA conveyor system | 2730 |
| 4 | A four quadrant adjustable speed drive for series wound DC motors | 2109 |
| 5 | Advanced wastewater treatment systems | 1868 |
| 6 | Assessment of appropriate pressure vessel flange bolt tension by finite element modelling | 1759 |
| 7 | Design and review of Millmerran coal handling plant | 1603 |
| 8 | FoES Formula SAE-A space frame chassis design | 1579 |
| 9 | Design of structural glass fitting for seismic condition | 1378 |
| 10 | 3D terrain visualisation and virtual fly-through for tourism conservation using Geographic Information Systems (GIS) | 1280 |
| 11 | High-strength structural concrete with recycled aggregates | 1250 |
| 12 | The PID controller design using genetic algorithm | 1214 |
| 13 | Analysis and modeling of grouting and its application in civil engineering | 1212 |
| 14 | Dragline maintenance engineering | 1142 |
| 15 | Optimising condenser air extraction to reduce greenhouse gas emissions at the Loy Yang B power station | 1013 |
| 16 | An autonomous bird deterrent system | 943 |
| 17 | Applicability of no-fines concrete as a road pavement | 923 |
| 18 | Life cycle assessment of a mobile phone | 922 |
| 19 | Selection of an engine and design of the fuelling system for a Formula SAE car | 909 |
| 20 | Investigate the use of thermal protection for underground cables in Ergon Engery's electricity network | 907 |
| 21 | Impediments to identifying freehold land rights in N.S.W. | 858 |
| 22 | Formula SAE: design overview and project management | 857 |
| 23 | The effect of compression ratio on the CNG-diesel engine | 833 |
| 24 | Educational robot design | 819 |
| 25 | Use of short fibres in structural concrete to enhance mechanical properties | 814 |
| 26 | Determination of mean high water mark within New South Wales | 759 |
| 27 | The effect of DC current on power transformers | 719 |
| 28 | A study on concrete faced rockfill dams | 717 |
| 29 | Embedded control system for biogas digesters | 708 |
| 30 | A study and evaluation on SMART Project, Malaysia | 700 |
| 31 | Data mining using Matlab | 696 |
| 32 | Analysis of engine performance using palm oil methyl ester | 685 |
| 33 | Co-firing of rice husk for electricity generation in Malaysia | 680 |
| 34 | The usage of domestic water filtration systems in Malaysia | 675 |
| 35 | A study of building foundations in Malaysia | 672 |
| 36 | Construction technology for high rise buildings in Hong Kong | 659 |
| 37 | Steering design for a formula SAE-A open wheel race car | 654 |
| 38 | Investigation on reuse potential of laundry water for household garden irrigation in Toowoomba | 636 |
| 39 | Testing and analysis of fibre composite beams
in a bridge structure | 636 |
| 40 | Balancing a two wheeled robot | 627 |
| 41 | The effect of admixtures in concrete containing manufactured sand | 619 |
| 42 | Analysis of the recycling method for aluminum soda cans | 613 |
| 43 | Analysis of a sheet metal bucket elevator head | 605 |
| 44 | The design of a three point linkage implement height control system | 603 |
| 45 | Project management : a guide from start to finish for BHPBilliton Iron Ore Engineering Services Dept. Port Hedland | 599 |
| 46 | Review of the current timber industry in Malaysia | 595 |
| 47 | Balancing wheeled robot | 559 |
| 48 | Electronics and the environment - Singapore perspective | 546 |
| 49 | An internet based SCADA system | 541 |
| 50 | Real-time monitoring and control of a
pressure control system | 538 |
| 51 | In-vehicle display system | 531 |
| 52 | Mapping the distribution of general practitioners and their billing pattern in the Toowoomba District | 524 |
| 53 | Life cycle assessment of a personal computer | 522 |
| 54 | Treatment of mine water with colloidal suspensions | 520 |
| 55 | Evaluation of the Queensland streets concept in residential streets in Logan City | 517 |
| 56 | PID tuning controller using internal model control method | 514 |
| 57 | The development of a new multi-directional fall arrest device | 508 |
| 58 | Software simulator development for orthogonal frequency division multiplexing (OFDM) modulation | 484 |
| 59 | Steering system and suspension design for a formula SAE-A racer | 480 |
| 60 | Assessing RTK GPS for a suburban survey practice | 476 |
| 61 | The use of waste cooking oil as an alternative fuel for the diesel engine | 462 |
| 62 | Vortex shedding on bridge piers | 459 |
| 63 | Modelling load balance type static var compensator control system response | 458 |
| 64 | The impact of trenching on urban road operation and maintenance | 454 |
| 65 | Speaker identification - prototype development and performance | 454 |
| 66 | Which geoid model should be used for GPS heighting on the Toowoomba bypass project? | 445 |
| 67 | The analysis of Neighbourhood Watch structure using Geographic Information System (GIS) | 431 |
| 68 | Effect of epoxy repairing on girders shear strengthened with external post tensioning | 429 |
| 69 | Evaluation of wet scrubber systems | 424 |
| 70 | Testing of robotic total stations for dynamic tracking | 414 |
| 71 | Spatial analysis of Tasmanian Devil facial tumour disease | 412 |
| 72 | Design and trial of an alternative option for suburban sewerage pump stations | 409 |
| 73 | Chassis development for the formula SAE racer | 408 |
| 74 | Greywater reuse in urban areas | 396 |
| 75 | Current controller for inverter bridge designed for grid-connected photovoltaic system | 389 |
| 76 | Corrosion in the boiler tubes of the Tuas South Incineration Plant, Singapore | 389 |
| 77 | The use of recycled concrete aggregate in structural concrete around South East Queensland | 373 |
| 78 | Life cycle assessment of the production of raw milk | 372 |
| 79 | Testing of robotic total stations for dynamic tracking | 370 |
| 80 | OPC cycle time analyser | 361 |
| 81 | Finite element analysis of a composite bridge deck | 350 |
| 82 | Burdekin Falls Dam: investigation of the structural integrity of the outlet works radial gate and fixed wheel gate under emergency closure situations | 332 |
| 83 | Comparative study of engineering leadership of senior engineers in Malaysia & Australia within the construction industry | 332 |
| 84 | Development of the drivetrain including brakes and wheels for the Formula SAE-A vehicle | 331 |
| 85 | South East Queensland waterways, land use and slope analysis | 328 |
| 86 | Water leakage detection circuit in external chiller unit | 326 |
| 87 | Turf monitoring technology to aid in benchmarking and maintenance of sporting fields | 311 |
| 88 | Quality assurance | 306 |
| 89 | Problems of stone mastic asphalt use in north Queensland | 302 |
| 90 | Numerical modelling of complex slope using FLAC/SLOPE | 301 |
| 91 | Remote access of automated test equipment | 300 |
| 92 | Developing physical model for bearing capacity and flow net applications | 295 |
| 93 | Chassis design for SAE racer | 293 |
| 94 | Remote monitoring and instrumentation for Mount Kent observatory | 293 |
| 95 | Cost effectiveness of suburban street lighting | 286 |
| 96 | Effects and controls of lateral refraction in underground coal mines | 286 |
| 97 | Best percentage weight of microspheres as fillers in resin using three-point bending test | 284 |
| 98 | Development of a drivetrain system for a formula SAE-A race car | 283 |
| 99 | Benefit of partnering in the Hong Kong construction industry | 283 |
| 100 | A new internal combustion engine configuration - opposed piston with crank offset | 283 |
| 101 | Modular robot communication interface | 281 |
| 102 | Design of a rear suspension configuration for a live axle race car to achieve optimum handling characteristics | 281 |
| 103 | Development of quality assurance procedures
for cadastral surveying using GPS technology | 281 |
| 104 | Millmerran Power Station ROM coal blockage removal system | 280 |
| 105 | Compressed natural gas as an alternative fuel in diesel engines | 275 |
| 106 | The development and implementation of a knowledge management system for the NDCG access line of business | 272 |
| 107 | Ventilation of highwall mining to control methane concentration at the Moura Mine | 272 |
| 108 | Natural gas burner for copper smelter converter | 271 |
| 109 | Numerical investigation of the temperature distribution in an industrial oven | 270 |
| 110 | Using GIS to explore the relationship between road grade and accidents | 268 |
| 111 | Rationalisation of wastewater treatment plants in Launceston | 265 |
| 112 | Telemetry and communication systems for irrigation management | 263 |
| 113 | A study of pavement performance on the Gatton Bypass Duplication | 258 |
| 114 | Research and development of multi purpose carbide end mill | 254 |
| 115 | Total effect on the environment of electric/hybrid electric vehicle batteries | 253 |
| 116 | Assessment of factors influencing water reuse opportunities in Western Australia
| 250 |
| 117 | Toowoomba road network review | 250 |
| 118 | Estimating rippability of Brisbane Tuff using
quantitative and qualitative characteristics and a
modified approach to an existing rippability rating method | 249 |
| 119 | Role of a project manager in a residential development housing development in Singapore - Analyse the use of bar code in tracking drawing during the construction of a residential development in Singapore | 248 |
| 120 | Management of physical assets at Purga Quarry | 247 |
| 121 | Effect of admixtures on the use of short fibres in structural concrete to enhance mechanical properties. | 245 |
| 122 | Review of the jet grouting method | 244 |
| 123 | Control and instrumentation for the USQ Formula SAE-A race car | 243 |
| 124 | Safety management system | 242 |
| 125 | Lifting mechanism of wheelchair | 242 |
| 126 | Design of steel structures under fire | 240 |
| 127 | Development of a low cost GPS guidance system for use in agriculture | 238 |
| 128 | Accuracy of volumes from MX(moss) design software | 238 |
| 129 | Relevance of identification surveys in N.S.W. conveyancing | 237 |
| 130 | Field deployable shower unit by dual membrane filtration | 237 |
| 131 | Analysis of hydraulic transients in pipeline networks | 236 |
| 132 | Local and post-local buckling of steel tubes in thin-walled circular concrete-filed steel tubular columns | 235 |
| 133 | Reduction of nitrogen oxides (NOx) using liquefied petroleum gas (LPG) in spark ignition (SI) engine | 233 |
| 134 | A study and evaluation on Seri Wawasan bridge in Putrajaya, Malaysia | 233 |
| 135 | Evaluation of control for the adjustment of the digital cadastral data base (DCDB) | 231 |
| 136 | Optimisation of biodiesel stationary engine performance by modelling and simulating the running conditions | 231 |
| 137 | An investigation into the establishment of a continuously
operating GPS reference station at Dubbo City Council,
Central West NSW | 230 |
| 138 | Investigation of tenable carbon monoxide and visibility level for a fired room | 229 |
| 139 | Vehicle undercarriage scanning system | 229 |
| 140 | Managing product development process for time market | 225 |
| 141 | PID controller optimisation using genetic algorithms | 224 |
| 142 | How engineers become CEOs - implications for education and training | 223 |
| 143 | Determination of insitu flexible moduli of modified pavement materials | 223 |
| 144 | Develop a system to monitor, analyse and report health data captured during exercise | 220 |
| 145 | Wall climbing robot | 220 |
| 146 | Open area test site (OATS) development | 216 |
| 147 | GIS for house hunters: a case study in Toowoomba | 215 |
| 148 | Intelligent building automation system | 214 |
| 149 | Power station operations Millmerran power station feed water dissolved oxygen control | 211 |
| 150 | Seismic stability of slope | 210 |
| 151 | Engine optimisation and performance characteristics for a formula SAE race car | 210 |
| 152 | The finite difference time domain method for computational electromagnetics | 209 |
| 153 | Electronic systems for the USQ formula SAE racer | 207 |
| 154 | Impact of demand-side management on substations | 205 |
| 155 | Forensic investigation of pavement failures | 205 |
| 156 | Theatre booking system | 205 |
| 157 | Transverse injection from a hypersonic cone | 204 |
| 158 | Investigation into the non-invasive monitoring of blood
glucose levels in people with diabetes | 204 |
| 159 | Life cycle assessment of cement in Malaysia | 204 |
| 160 | Video compression using ITU-T recommendation H.264 | 203 |
| 161 | Economics of photovoltaic water pumping system in Sultanate of Oman | 203 |
| 162 | Frequency synthesizer requirements for future cellular radio systems (06-026) | 203 |
| 163 | Ipswich City Council water supply infrastructure capacity
high water usage and water meter accuracy | 203 |
| 164 | Implications for engineers aspiring to become top-senior managers | 202 |
| 165 | To determine if there is a correlation between the shrink swell index and atterberg limits for soils within the Shepparton Formation | 202 |
| 166 | Guidelines for the use of electronic survey field notes and CAD computation files as legal records | 202 |
| 167 | Comparison of moisture density relationship tests in civil engineering materials | 199 |
| 168 | Porous weirs for flood mitigation | 198 |
| 169 | The formation of nitrogen oxides in a pulverised coal boiler | 198 |
| 170 | Control of early thermal cracking of raft foundation by using slagcrete portland blast-furnace cement (PBFC) | 198 |
| 171 | The autonomous unmanned aerial surveillance vehicle navigation and user interface | 198 |
| 172 | Investigation of TCP performance over wireless internet | 196 |
| 173 | Fractal video compression | 196 |
| 174 | Forest road decommissioning: modelling the effect on hydrological connectivity | 196 |
| 175 | Water and wastewater strategic township plan Warragul, Victoria | 195 |
| 176 | The effect of water ratio on the mechanical properties of refactory materials | 194 |
| 177 | Developing a monitoring and control system for irrigation pumping units | 194 |
| 178 | Analysis of catchment G in Oakey's sewer network | 194 |
| 179 | 50 kW eddy current brake | 192 |
| 180 | Advance rate measurement for furrow irrigation | 189 |
| 181 | A model to establish a global navigation satellite system (GNSS) testing and validation center at the University of Southern Queensland | 189 |
| 182 | Software radio architectures - part 2 | 188 |
| 183 | Comparison of injury criteria for human head impacts | 187 |
| 184 | The design and optimisation of a prototype sailplane | 187 |
| 185 | Evaluation impact strength on particulate reinforced (25% and 33%) vinyl ester composite cured under microwave conditions | 186 |
| 186 | Design and development of a conveyor system for semiconductor industry | 184 |
| 187 | Design and construction of a solar collector for teaching purposes | 184 |
| 188 | A quality assurance system at the Land Survey and Mapping Unit (Malta) | 183 |
| 189 | Design of electro-hydraulic controlled poppet valves | 183 |
| 190 | Literature review of advanced research and innovation in the mining industry | 183 |
| 191 | Recycling of used electronics in Singapore | 182 |
| 192 | Mapping greens at City Golf Course | 181 |
| 193 | Testing mapping grade GPS carrier phase accuracy | 181 |
| 194 | Property rights and the littoral zone in
Queensland | 178 |
| 195 | Motorcycle safety in Malaysia | 178 |
| 196 | Life cycle assessment of CSR autoclaves lightweight concrete production in Malaysia | 178 |
| 197 | A MATLAB-based framework for engineering design evaluation via virtual prototyping | 177 |
| 198 | Mobile robot guidance and navigation | 175 |
| 199 | Production flow analysis & inventory control for Orford Refrigeration | 174 |
| 200 | Analysis of providing affordable electricity supply for the outer islands in the Maldives | 174 |
| 201 | GIS based cadastral planning | 173 |
| 202 | Improving the aerodynamic force measurement system for the USQ gun tunnel | 173 |
| 203 | Embedded IP for small devices | 172 |
| 204 | Interactive map associated with tourism | 172 |
| 205 | Autonomous unmanned aerial surveillance vehicle - autonomous control and flight dynamics | 171 |
| 206 | Life cycle maintenance of low volume roads in the Alice Springs region | 170 |
| 207 | Non-trible GPS receivers and virtual reference stations (VRS) | 170 |
| 208 | Implementation of JPEG-2000 standard for the next generation image compression | 169 |
| 209 | Durability of hybrid concrete-FRP bridge decks | 169 |
| 210 | Evaluation of VRS-RTK GPS latency in a dynamic environment | 169 |
| 211 | Evaluation of Ashtech ProMark2 survey system | 169 |
| 212 | System design for formula SAE-A racecar | 169 |
| 213 | Internal model control (IMC) of a fruit drying system | 169 |
| 214 | Investigating the economic viability and methods of harvesting and storing Leucaena | 168 |
| 215 | Automation of a load-haul-dump (LHD) unit | 168 |
| 216 | Shrinkage reduction of thermoset matrix particulate reinforced composites during hardening using low power microwave | 167 |
| 217 | Heat transfer measurements of a re-entry capsule using fast response thermocouples | 166 |
| 218 | Evaluating the potential to impose partial root zone drying (PRD) on clay soils in commercial cotton production systems | 166 |
| 219 | Measuring moisture content of biofilter media using capacitance | 166 |
| 220 | Computational fluid dynamics (CFD) investigation of the thermal efficiency of micro climate conditioning of a typical workstation | 166 |
| 221 | Irrigation performance and water use efficiency of turf
production | 166 |
| 222 | Investigation into the placement and connection of permanent survey marks for cadastral surveys | 165 |
| 223 | Ultimate strength of steel-concrete composite beams under combined bending and torsion | 165 |
| 224 | E-tutorials for electrical engineering courses using dreamweaver | 164 |
| 225 | Reverse osmosis water purification unit: for government and non-government use in disaster relief | 163 |
| 226 | Mobile manoeuvring robot | 163 |
| 227 | Evaluation of commercial EMF software | 163 |
| 228 | Accuracy evaluation of 3-D laser imaging scans | 162 |
| 229 | Relationship contracting in Malaysia | 162 |
| 230 | Cloud detection system for the Mt Kent observatory | 161 |
| 231 | Stress analysis of axially loaded perforated steel plates by experimental and finite element methods | 161 |
| 232 | Weather induced changes on domestic water consumption | 161 |
| 233 | Critical review of techniques for rigid spoolpiece metrology observation and reduction | 160 |
| 234 | Quality assurance for virtual reference stations | 160 |
| 235 | Computational fluid dynamics (CFD): investigation for improving pigs' housing design | 159 |
| 236 | Clear zones in urban environments | 159 |
| 237 | Optimisation of Gold Coast City’s chlorine dosing system for the southern region distribution network | 159 |
| 238 | Next-generation 3D graphics engine design | 158 |
| 239 | Development of an asset management strategy for the city of Mandurah WA | 158 |
| 240 | Shear strengthening and model testing of concrete bridge headstocks | 157 |
| 241 | Micrographs of the fracture of vinyl ester composites cured by microwaves | 157 |
| 242 | Modelling Tamworth regional council stormwater network | 157 |
| 243 | Restitution of land for agricultural development Ehlanzeni region Mpumalanga | 157 |
| 244 | Ambient air temperature aeration controller | 157 |
| 245 | Life cycle assessment in electronics | 156 |
| 246 | GPS usage and infrastructure needs for machine guidance
and control in the construction projects associated with
QDMR
| 156 |
| 247 | Mapping of an old mine site for heritage purposes | 155 |
| 248 | Electrical training package for mining area C | 155 |
| 249 | Reduction of noise transmission in The Adephi, Singapore | 154 |
| 250 | Investigation of the flexural strengthening of concrete beams using external prestressing | 154 |
| 251 | Performance and stability analysis of an AC variable speed drive | 154 |
| 252 | A comparison of DGPS correction sources in South Eastern Queensland | 154 |
| 253 | Comparison of life cycle energy consumption of alternative irrigation systems | 154 |
| 254 | Factors in the selection of contractors for engineering works | 154 |
| 255 | The use of industry by-products in the treatment of acid sulfate soils | 153 |
| 256 | A study of the ground and vegetation effects on the propagation of road traffic noise in south east Queensland | 153 |
| 257 | Security performance of a wireless LAN testbed | 153 |
| 258 | Development of infiltration factors for the estimation of urban separate wastewater flow in the Gippsland water catchment | 152 |
| 259 | The bodywork package for the USQ's Formula-SAE racer | 152 |
| 260 | Directional microphone array for security applications | 152 |
| 261 | Design of aeration ploughing tool for poultry litter within shed to reduce odour generation | 152 |
| 262 | Replacement of chiller system of a terminal building | 151 |
| 263 | The behaviour of hybrid fiber composite beams | 151 |
| 264 | Development of a remote laboratory system for external university students | 151 |
| 265 | Improving the performance of an industrial cold room | 151 |
| 266 | Use of road asset maintenance planning software in QDMR | 149 |
| 267 | Predicting the crushing stress of composite materials | 148 |
| 268 | Life cycle assessment in semiconductor foundry | 148 |
| 269 | Rural arterial road operating speed assessment | 147 |
| 270 | Assisted standing and walking mode for Robug IV eight legged robot | 146 |
| 271 | Development of a mobile vehicle classification system | 146 |
| 272 | Short-term water demand forecasting for production optimisation | 145 |
| 273 | The resolution of uncertain boundaries at Amity Point (North Stradbroke Island) | 145 |
| 274 | Instrumentation to track the southern elephant seal | 144 |
| 275 | Investigation of driver fatigue problems on the Oakey-Cooyar road | 143 |
| 276 | 'Online learning environment' using ASP.NET | 143 |
| 277 | Redesign and analysis of Janke Bros. F500P parallelogram planting unit | 143 |
| 278 | An inexpensive hardware-based identification system for improved computer security | 143 |
| 279 | Developing a methodology using multi spectral remote sensing data for mapping vegetation change - a key variable in soil erosion mapping | 143 |
| 280 | Recycling consumer electrical and electronic equipment | 143 |
| 281 | Cost effectiveness of suburban street lighting | 143 |
| 282 | Respiration monitor and recording system | 143 |
| 283 | Shear strengthening of headstocks using prestressed fibre strips | 142 |
| 284 | Quality assurance system in a small surveying firm | 142 |
| 285 | Investigation of a new generation degradable implant material | 141 |
| 286 | The design and structural analysis of a steel portal framed shed for the Darling Downs Historical Rail Society | 140 |
| 287 | Production operation system - key performance indicator | 140 |
| 288 | Pitch control module microprocessor upgrade modification raytheon beechcraft bonanza A36 | 140 |
| 289 | TDR probes for the measurement of root zone soil moisture | 140 |
| 290 | Stabilisation of Goulburn Valley soils for the improvement of subgrades in new low traffic pavement construction | 139 |
| 291 | Development and characterisation of an anechoic chamber | 139 |
| 292 | The investigation into modes of failure of total hip replacements | 138 |
| 293 | Risk mapping in the Condamine River catchment basin | 136 |
| 294 | Identification mapping and evaluation of timber bridges in the Wide Bay District | 136 |
| 295 | Design of a microclimate ventilation system | 136 |
| 296 | Numerical investigation into the aeration of grain silos | 135 |
| 297 | Historical identification and mapping | 135 |
| 298 | Analysing the effect of speed variation on irrigation efficiency in travelling irrigators | 134 |
| 299 | Numerical investigation of the thermal efficiency of glass
refrigeration doors | 133 |
| 300 | Fracture analysis of vinyl ester composites under microwave condition | 133 |
| 301 | Establishment of a priority infrastructure plan for the major road network in Laidley Shire | 133 |
| 302 | Dynamic tracking of a race car | 133 |
| 303 | Experimental study of the mechanical properties of particulate reinforced composite | 132 |
| 304 | Development of a tool for estimating net emissions of greenhouse gases at farm and sub-catchment level | 131 |
| 305 | Siphons as furrow irrigation measurement devices | 131 |
| 306 | Cost-effective 3D modelling | 131 |
| 307 | The effect of wide open bays on legal boundaries | 130 |
| 308 | Road stabilisation issues in southern district of the Department of Main Roads, Queensland | 129 |
| 309 | Evolutionary structural optimization for multi component structural systems | 129 |
| 310 | Prediction of feedlot effluent pond odour emission after significant inflow | 128 |
| 311 | Software development for power system analysis | 128 |
| 312 | Effect of existing cracks in shear strengthening of concrete girders with external post tensioning | 127 |
| 313 | Fracture analysis of vinyl ester composites cured under microwave conditions | 127 |
| 314 | Understanding progressive collapse and its effect to structural design | 127 |
| 315 | Impact response of flat and perforated plate | 126 |
| 316 | Development of a mechanical testing system to investigate road deformation | 125 |
| 317 | Accuracy assessment of VRS in a dynamic environment | 125 |
| 318 | Design and implementation of a network address translator | 123 |
| 319 | Using renewable plantation timber as a replacement option for unrenewable hardwood girders in bridges | 122 |
| 320 | Issues with wireless 802.11 networks | 122 |
| 321 | Site formation works for Shek Mun development | 121 |
| 322 | Interactive web-based signal processing tutor | 121 |
| 323 | Multimedia database search techniques | 121 |
| 324 | Spatial analysis of woody vegetation land cover change in Crows Nest Shire, QLD | 121 |
| 325 | Development of a portable high-wall lighting system | 121 |
| 326 | The private surveyor as a spatial data custodian in the local community | 120 |
| 327 | Life cycle assessment of a SAW filter | 120 |
| 328 | Fracture analysis of vinyl ester composites under microwave condition | 119 |
| 329 | Extracting spatial information from aerial video imagery for monitoring riparian areas | 119 |
| 330 | Best percentage by weight of micro-spheres as fillers in phenolic resins, with fracture toughness as a benchmark | 118 |
| 331 | Using tensile tests as benchmark, investigate the best percentage by weight of slg, as fillers, in Phenolic resins post-cured by microwaves | 117 |
| 332 | Fast-response piezoresistive pressure transducers for thermofluids experiments | 117 |
| 333 | Influence of physical road characteristics on road crashes | 116 |
| 334 | Evaluation of funding justification of low volume roads in North Queensland | 114 |
| 335 | Hydraulic properties of Toowoomba soils for laundry water reuse | 114 |
| 336 | Iterative decoding for error resilient wireless data transmission | 114 |
| 337 | Accuracy assessment of 3D laser scanning data utilising different registration methods | 114 |
| 338 | A comparative review of attributes of engineers in senior management roles | 113 |
| 339 | Design and development of a prototype, small plot research harvesting system | 112 |
| 340 | Defining non-tidal riparian boundaries | 112 |
| 341 | Jigs for checking machine alignment | 111 |
| 342 | A habitat suitability index model for the trapdoor spider species, "Arbanitis variabilis" | 111 |
| 343 | Numerical analysis of a closed face impeller | 111 |
| 344 | Watermarking for securing digital media content | 110 |
| 345 | Assessment of crop health in relation to competition from weeds: using balloon-borne images and pectrometer data | 108 |
| 346 | The effectiveness of a multiple-frequency global navigation satellite system (GNSS)on multipath mitigation | 108 |
| 347 | Abandoned shafts study (Charters Towers): a spatial solution | 107 |
| 348 | Development of a noisy vehicle detection system | 107 |
| 349 | Optimising the operations of the Kanaka Drain floodgate | 106 |
| 350 | Assessment of the feasibility of a terrestrial scanner in underground and surface mining at BHPB Cannington mine | 104 |
| 351 | Automatic roller shell groover | 104 |
| 352 | Testing of current flooring systems and materials | 104 |
| 353 | Cost effectiveness of street lighting | 104 |
| 354 | Effect of existing cracks in shear strengthening of concrete girders with external post-tensioning | 103 |
| 355 | On-line equipment condition monitoring based maintenance | 102 |
| 356 | Stress relieving furnace modelling and analysis | 100 |
| 357 | Research, design and develop a pipe
latching/unlatching device that can be used to help
automate the pipe tripping process | 100 |
| 358 | Error resilient JPEG2000 transmission over wireless fading channels | 100 |
| 359 | Carbon nanotubes (CNT) as potentially a more effective
material for photovoltaic (PV) converters | 100 |
| 360 | Automation of the rollingstock twist test | 99 |
| 361 | Soil amendments to improve playability and reduce injury risks on sporting fields | 98 |
| 362 | Investigation of relationships between skid resistant deficient pavement and aggregate by GIS and statistical analysis | 98 |
| 363 | Stormwater harvest and reuse for a wholesale nursery | 98 |
| 364 | Wildlife vehicle collision GIS mapping & modelling | 98 |
| 365 | Bioretention basin best practice design guidelines | 98 |
| 366 | XML based online traffic information | 97 |
| 367 | Terrestrial photo modelling | 97 |
| 368 | Quality review of unit technical logistic and maintenance processes | 97 |
| 369 | Active vibration control | 97 |
| 370 | Which geoid model should be used for GPS heighting on the Toowoomba bypass project?
| 96 |
| 371 | Sensitivity of capacitance probes to soil cracks | 95 |
| 372 | The effect of compaction on the design life of rehabilitated insitu cement powder stabilised pavements | 94 |
| 373 | The effectiveness of an aerofoil shaped pier reducing down stream vortices and turbulance | 93 |
| 374 | Strengthening of headstocks with vertical clamping to enhance shear capacity | 90 |
| 375 | Application of geographical information system in underground coal mine to assist operational management | 89 |
| 376 | Tensile strength of sawdust reinforced phenolic resin composite materials | 89 |
| 377 | Viability of a coordinated cadastre in New South Wales | 88 |
| 378 | Freight transport following an extreme rainfall event | 88 |
| 379 | Applications of geospatial information technology for fire risk assessment and management in NSW | 87 |
| 380 | Bridge approach guardrail prioritisation | 86 |
| 381 | Prioritisation of guard rail remediation works | 85 |
| 382 | Current and future capacity of the Wirraglen Scout Reserve Wetlands to improve urban stormwater quality at Highfields | 84 |
| 383 | Investigation of Toowoomba intersection crashes | 82 |
| 384 | Optimisation of low-cost astronomical site testing techniques | 82 |
| 385 | Computational fluid mechanics investigation of ventilation aboard a livestock vessel | 81 |
| 386 | Driver fatigue issues on State Highway 1 south of Whangarei - within region 1 of New Zealand | 80 |
| 387 | The pedestrianisation of inner city Toowoomba | 76 |
| 388 | Variable rate bitumen spraying in road construction
and resurfacing | 75 |
| 389 | 3D Terrestrial laser scanning for application in earthwork and topographical surveys | 74 |
| 390 | Supervisory control of material handling conveyor belt system | 73 |
| 391 | Urban stormwater treatment using chitosan | 70 |
| 392 | Bike tour plan for Toowoomba region | 67 |
| 393 | Global navigation satellite systems for geodetic network surveys
| 64 |
| 394 | Investigation of the bearing capacity of shallow
footings located near slopes | 59 |
| 395 | Measuring and monitoring of grain silos using laser scanning and total stations | 49 |
| 396 | Position control using a digital servo system | 45 |
| 397 | Deriving transformation parameters for existing survey co-ordinate systems in the Australian Capital Territory | 45 |
| 398 | Investigation of construction practices and test procedures for road pavements on expansive subgrades | 43 |
| 399 | Pulsed liquid jet for rock breaking | 38 |
| 400 | How to establish map projections to facilitate the use of GPS on ground-based surveys | 36 |
| 401 | Inspiring high precision dam water depth measurement with novel 'bubbler’ designs | 36 |
| 402 | Improving information management & project proposal automation at Data#3 | 35 |
| 403 | The maintenance of “moment continuity” within structural concrete beam steps | 32 |
| 404 | The development of a computer based system for the rehabilitation of arm movements of stroke patients | 32 |
| 405 | A Review of a cadastral boundary adjustment software program | 31 |
| 406 | The development of an antigravity arm to assist in the rehabilitation of stroke patients | 27 |
| 407 | A comparison of remotely sensed terrestrial spatial information | 25 |
| 408 | Investigation of domestic water end use | 21 |
| 409 | A two-dimensional analysis of the bearing capacity of footings near slopes | 20 |
| 410 | Machine vision based traffic monitoring with real time tracking | 20 |
| 411 | Validation of the Sydnet, continuously operating reference
stations for use in global navigation satellite system surveying | 19 |
| 412 | Validation of cooling grid model and testing of alternatives | 18 |
| 413 | Control of accumulator in a continuous processing line | 17 |
| 414 | Flexural strength SLG-reinforced phenolic composites cured in microwaves | 17 |
| 415 | Investigation on utilising real time kinematic (RTK) global
navigation satellite systems (GNSS) for electronic distance
measurement (EDM) baseline calibration and traceability of measurement. | 17 |
| 416 | Air flow through two layered mesh at varying porosity and spacing | 16 |
| 417 | Investigation into the performance of first flush systems for diesel engine based pollution on roof runoff | 12 |
| 418 | Interaction of recycled concrete and geogrid reinforcement material 14m high reinforced earth wall | 12 |
| 419 | Rolling stock bearing condition monitoring systems | 12 |
| 420 | Investigation on the adequacy of disinfection in Toowoomba's water supply network | 12 |
| 421 | Simulation of GPS car navigation systems in evaluating the impact of poor quality road data | 10 |
| 422 | The commercial implications of the NZ surveyor-general's rules for cadastral survey 2008 | 9 |
| 423 | Deriving land use and land cover maps from 2.5m SPOT 5 imagery | 8 |
| 424 | Relationship contracting in the mineral processing industry | 7 |
| 425 | Investigation of the best percentage by weight of glass
powder as fillers, in phenolic resins using flexural tests | 7 |
| 426 | Design and implementation of a remotely accesible inrush current testing package for power (distribution)transformers | 6 |
| 427 | The design and construction of a large scale- force feedback joystick for the use in physiotherapy | 6 |
| 428 | Virtual reference station (VRS) in South Africa | 6 |
| 429 | Track stability and buckling - rail stress management | 6 |
| 430 | Effectiveness of real time kinematic global navigation satellite system suveying (RTK GNSS) | 5 |
| 431 | Development and testing of a portable GNSS network solution
using the magellan propark3 | 4 |
| 432 | Design of a small wind turbine | 4 |
| 433 | Feasibility study: into the design, effectiveness & limitations of installing raingardens within an inner urban environment | 4 |
| 434 | Human electromagnetic radiation exposure | 4 |
| 435 | Design review and analysis of Collinsville power station coal handling plant | 3 |
| 436 | Investigation of the best percentage, by weight, of glass powder as filler in phenolic resin using three point bending test | 3 |
| 437 | Determination of property boundaries in NSW where monument movement has occurred | 3 |
| 438 | Application of an urban runoff model using surface specific parameters | 3 |
| 439 | Fracture toughness of phenolic resins composite by using saw dust as filler of percentage by weight | 3 |
| 440 | Hoist system for small boat stacker | 3 |
| 441 | Investigate the best percentage by weight of glass powder, as fillers in phenolic resins using tensile tests | 2 |
| 442 | Water metering and revenue protection | 2 |
| 443 | Preliminary water balance models of the Daly river catchment | 2 |
| 444 | Building a two wheeled balancing robot | 2 |
| 445 | Design and implementation of a microprocessor-controlled BMX start gate | 2 |
| 446 | Impact of tailings subsidence on rehabilitated landform erosional stability | 1 |
| 447 | The effect of the 50km/h implementation on local streets in
Toowoomba | 1 |
