A CO2 measurement system for low-cost applications using chemical transduction

Maxwell, Andrew Douglas (2002) A CO2 measurement system for low-cost applications using chemical transduction. [Thesis (PhD/Research)] (Unpublished)

[img]
Preview
PDF (Introductory Pages)
Maxwell_2002_front.pdf

Download (181Kb)
[img]
Preview
PDF (Whole Thesis)
Maxwell_2002_whole.pdf

Download (6Mb)

Abstract

It is demonstrated that by using a miniature chemical reaction vessel under adaptive mechatronic control, it is possible to design and construct a low-cost carbon dioxide measurement system. With further development such a system would be potentially suitable for low-cost commercial application, in particular as sacrificial, single-mission instrumentation packages in horticultural cargo monitoring. Current instrumentation systems for carbon dioxide (CO2) gas measurement are reviewed and their limitations with respect to low cost commercial applications determined. These utilise technology intended for laboratory measurements. In particular the optical energy absorbance of CO2 in the infra-red electromagnetic spectrum. These systems require large optical paths (typically 10cm) in order to measure small CO2 concentrations. This in turn has a large impact on the physical size of the sensing system. Of the many applications requiring online CO2 sensing packages (such as medical, petroleum, environmental and water treatment)the horticultural industry is the primary focus for this research. CO2 sensing systems are primarily used in horticulture to monitor the produce environment and help extend storage time. For these applications CO2 concentrations are typically low (in the range 0 to 1%) and the paramount need is for low-cost (and possibly disposable) sensing packages. The basis of the measurement technique is the use of bulk (but small volume) aqueous chemical reaction under mechatronic control. Unlike thin film technologies where very thin membranes are passively exposed to the gaseous sample, here a small volume (approximately 2mL) of simple and very cheap liquid chemical indicator (calcium hydroxide solution) is used to produce an opaque precipitate. CO2 concentration is then assessed by low-cost optical attenuation measurements of the developing opacity of the solution. The instrumentation package comprises pumps, flowmeter, reaction cell and infra-red optics for the turbidity measurement, plus reagent and waste vessels, pipelines and electronics. During each measurement cycle, the reaction cell is flushed, with fresh chemical indicator and a sample of gas admitted. The indicator and the sample gas are then vigorously mixed and the change in the indicators optical properties measured at regular intervals. An embedded 8-bit microcontroller performs the necessary analysis to deduce the CO2 concentration (as percentage by volume) for the sample gas by reference to one or more of five ``Time-To-Threshold'' calibration models. These models evaluate the trend in turbidity development as precipitate is formed. First and second prototypes of the measurement system have been constructed and their (low-cost) components and overall performance evaluated, the first a `proof-of-concept' and the second to investigate methodology shortcomings. As a result the design of a third prototype is outlined. The measurement systems have been shown to work adequately well within expected limitations, resulting in a usable low-cost measurement technique. The current prototypes have a useful range of at least 5% to 100% CO2 with a discrimination of typically +-6%. Deficiencies, particularly performance at low concentrations, are identified and potential enhancements for future prototypes proposed.


Statistics for USQ ePrint 1468
Statistics for this ePrint Item
Item Type: Thesis (PhD/Research)
Item Status: Live Archive
Additional Information: Doctor of Philosophy (PhD) thesis. Transfered from ADT 29/11/2006.
Depositing User: epEditor USQ
Faculty / Department / School: Historic - Faculty of Engineering and Surveying - No Department
Date Deposited: 11 Oct 2007 00:44
Last Modified: 02 Jul 2013 22:38
Uncontrolled Keywords: carbon dioxide (CO2), chemistry, surface acoustic wave sensors (SAW), callibration model, software development
Fields of Research (FOR2008): 07 Agricultural and Veterinary Sciences > 0706 Horticultural Production > 070605 Post Harvest Horticultural Technologies (incl. Transportation and Storage)
03 Chemical Sciences > 0301 Analytical Chemistry > 030107 Sensor Technology (Chemical aspects)
10 Technology > 1003 Industrial Biotechnology > 100304 Industrial Biotechnology Diagnostics (incl. Biosensors)
URI: http://eprints.usq.edu.au/id/eprint/1468

Actions (login required)

View Item Archive Repository Staff Only